- Discuss - lists.centos.org

Re: [CentOS] Outbound traffic spike every 30 minutes
by diegors＠gmail.com 04 Dec '13

04 Dec '13

Is inbound or outbound? What port? tcp or udp? ------Mensaje original------ De: Bowie Bailey Remitente: centos-bounces(a)centos.org Para: CentOS mailing list Responder a: CentOS mailing list Asunto: [CentOS] Outbound traffic spike every 30 minutes Enviado: 3 de dic de 2013 19:36 Since Sunday morning, one of my CentOS servers has been generating a small spike of outbound traffic every 30 minutes (X:00 and X:30). It's not enough traffic to really cause any notice except for the fact that it is a very regular pattern and it started abruptly at midnight Sunday. This server is used for mail (Courier-MTA), and DNS (Bind). I cannot find anything unusual in either of those logs. I tried grepping through my firewall logs, but have been unable to find anything useful there either. I don't see any cron jobs that would generate network traffic. Any suggestions how I can go about tracking this down? -- Bowie _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Diego Sanchez Sent from my mobile

3 2

how to inject a kmod driver from elrepo into kickstart
by psavoie1783 04 Dec '13

04 Dec '13

Hi All, I have a marvel chipset for my wired laptop connection. It uses the kmod-sk98lin-10.93.3.3-1.el6.elrepo.x86_64.rpm driver at elrepo. I would like to use this driver to activate the wired connection to kickstart my laptop as I have pxe booting set upon my home network. Could anyone please enlighten me as to how to get the drivers/firmware from this package loaded on my laqptop so I can use kickstart to load the OS, please? Thank you for your time, Phil -- To err, is human To never grow up, is divine

1 0

Automated LSI card management.
by Grant Keller 04 Dec '13

04 Dec '13

Hello, I am trying to come up with a way to auto add new servers deployed with LSI raid cards to the MegaRaid Software management server. From the gui, it looks like I can add them by IP manually, or have the control server scan for hosts with the MegaRaid client software, which only works if the host is on the same network. Anybody ever work with this software and done something like this? -- Grant Keller Sonic.net System Operations

3 5

Re: [CentOS] Outbound traffic spike every 30 minutes
by diegors＠gmail.com 03 Dec '13

03 Dec '13

Sorry... Try with some tool to see what type of traffic. (Munin,cacti,ganglia, etc) Is in your lan? Diego Sanchez Sent from my mobile -----Original Message----- From: diegors(a)gmail.com Date: Tue, 3 Dec 2013 20:42:39 To: CentOS mailing list<centos(a)centos.org> Reply-To: diegors(a)gmail.com Subject: Re: [CentOS] Outbound traffic spike every 30 minutes Is inbound or outbound? What port? tcp or udp? ------Mensaje original------ De: Bowie Bailey Remitente: centos-bounces(a)centos.org Para: CentOS mailing list Responder a: CentOS mailing list Asunto: [CentOS] Outbound traffic spike every 30 minutes Enviado: 3 de dic de 2013 19:36 Since Sunday morning, one of my CentOS servers has been generating a small spike of outbound traffic every 30 minutes (X:00 and X:30). It's not enough traffic to really cause any notice except for the fact that it is a very regular pattern and it started abruptly at midnight Sunday. This server is used for mail (Courier-MTA), and DNS (Bind). I cannot find anything unusual in either of those logs. I tried grepping through my firewall logs, but have been unable to find anything useful there either. I don't see any cron jobs that would generate network traffic. Any suggestions how I can go about tracking this down? -- Bowie _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Diego Sanchez Sent from my mobile

1 0

Story of an email
by Timothy Murphy 03 Dec '13

03 Dec '13

I'm running postfix + dovecot on my CentOS server, together with amavisd, clamd and spamassassin, following the instructions in <http://wiki.centos.org/HowTos/postfix>. As far as I can see it is all working, but I must admit I'm not clear exactly what path an incoming email travels along. I asked this question before, and someone suggested a document I should read, but unfortunately I've mislaid the note I made at the time. So if someone could enlighten me - or point to a source of enlightenment - I should be most grateful. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

10 14

kvm: vm root fs becomes ro
by Paul Heinlein 03 Dec '13

03 Dec '13

I've a the following happen a couple times now, and my internet searches are failing to locate an answer to the problem. We've got a few servers that primarily house VMs using KVM. They've got E-3 cpus and 32 GB RAM, and they run stock CentOS 6.4, fully patched (not yet migrated to 6.5). The VM disk images are housed on an NFS server. None of the VMs is particularly resource-hungry. They run a variety of Linux distros: CentOS 5/6, Debian 6/7. I'll start to see the VMs fail to write files to their local filesytems. No machine in the chain has rebooted or been updated in any significant way, but the root filesystem is off-limits. (This will happen on just one of our servers; the other VM platforms run without issue.) In /var/log/messages, I'll see the following entry for each impacted VM: <date> <host> kernel: kvm: <pid>: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd In /var/log/libvirt/qemu/<vm-name>.log, I'll see block I/O error in device 'drive-virtio-disk0': Stale file handle (116) Oddly, the underlying host might be running, say, five VMs, but only four of them will get the log messages, and show the read-only symptoms, while the fifth just keeps chugging along. Googling suggests that the "disabled perfctr wrmsr" message is harmless, but my experience suggests otherwise. Any hints, workarounds, or relevent information is very welcome. Thanks! -- Paul Heinlein heinlein(a)madboa.com 45°38' N, 122°6' W

4 3

Thanks on 6.5
by m.roth＠5-cent.us 03 Dec '13

03 Dec '13

Hey, Johnny et al, Thanks for the hard work, and quick followup to upstream. What's especially nice for us, and for other folks using CentOS at US federal gov't agencies, is that finally, the stock ssh-agent works seamlessly with pkcs11 and PIV/CAC cards, which is being required across the board. We'd been building our own openssh pieces... (and it was my manager that pushed that enhancement through a RH request <g>) mark

2 1

Where to put the kernel driver for a Fibre Channel HBA card.
by Arun Khan 02 Dec '13

02 Dec '13

CentOS 6.4 (amd64) stock kernel. HBA FC Accusys ACS 63200NT I built the driver from source, insmod activates the device and I can see the 24 TB storage volume via 'parted --list' I have created a XFS files system and mounted it under /srv/ Where do I need to install the driver in /lib/modules/ ... directory tree so that it is loaded automatically when the system boots? TIA, -- Arun Khan Sent from my non-iphone/non-android device

2 3

Problem upgrading from CentOS 6.4 to 6.5
by Gilbert Sebenste 02 Dec '13

02 Dec '13

Hello everyone, I had an issue with one of three servers upgrading from 6.4 to 6.5. It did not have the CR repo enabled. It failed dueing install, but I didn't catch the error (bad, bad, I know). OK, so it told me to run yum-complete transaction. After going through and figuring out what it had to do, it stops with this error: (etc, etc...) --> Processing Dependency: pkgconfig(ORBit-2.0) for package: libbonobo-devel-2.24.2-5.el6.i686 --> Processing Dependency: ORBit2-devel >= 2.7.5 for package: libbonobo-devel-2.24.2-5.el6.i686 ---> Package libgnomecanvas-devel.i686 0:2.26.0-4.el6 will be erased ---> Package polkit-docs.i686 0:0.96-5.el6_4 will be erased --> Processing Dependency: polkit-docs = 0.96-5.el6_4 for package: polkit-devel-0.96-5.el6_4.i686 --> Running transaction check ---> Package libbonobo-devel.i686 0:2.24.2-5.el6 will be erased ---> Package polkit-devel.i686 0:0.96-5.el6_4 will be erased --> Finished Dependency Resolution Error: Trying to remove "yum", which is protected You could try using --skip-broken to work around the problem ** Found 216 pre-existing rpmdb problem(s), 'yum check' output follows: ModemManager-0.4.0-5.git20100628.el6.i686 is a duplicate with ModemManager-0.4.0-3.git20100628.el6.i686 1:NetworkManager-0.8.1-66.el6.i686 is a duplicate with 1:NetworkManager-0.8.1-61.el6_4.i686 1:NetworkManager-glib-0.8.1-66.el6.i686 is a duplicate with 1:NetworkManager-glib-0.8.1-61.el6_4.i68 (etc) Any ideas on how to fix this? A "yum update" tells me to run yum-complete-transaction. For those who respond, I thank you for your time, I appreciate it! Gilbert ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

3 7

NetFilter Detection
by Robert Clove 02 Dec '13

02 Dec '13

Hi All, I was searching around but was not able to find out. We all know that packet traverses through the Net Filter hooks but how to practically realize that. Please guide Regards Clove

2 1

CentOS Hardware clock time setting.
by Anand Singh 02 Dec '13

02 Dec '13

Hi, I would like to sync my CentOS 6.3 hardware clock time to my NTP server's time. Can I do that without reboot the hosts? If yes, it would be great if anyone of you can provide me steps to do that. I am newbie in CentOS. Thanks, Anand Singh

5 5

Thank You To The CentOS Team
by Mark LaPierre 02 Dec '13

02 Dec '13

Hey all you dedicated folks out there who support the CentOS project. Thank you all for your dedicated effort and the great deal of work to get the 6.5 release up and running. Thank you all! -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

10 9

Kernel panic with VMware Workstation 8.0.6 and 6.5 kernel
by B.J. McClure 02 Dec '13

02 Dec '13

There is apparently a kernel bug that creates a kernel panic when starting a windows guest in vmware workstation. I have experienced this bug on two machines, both with workstation 8.0.6 but it has been reported with other versions as well: https://communities.vmware.com/message/2318686 . Booting kernel 2.6.32-358.23.2.el6.x86_64 instead of 2.6.32-431.el6.x86_64 resolves the issue. Just a heads up for those who may encounter it. Cheers, B.J.

1 0

too many groups for a user?
by Dirk Olmes 02 Dec '13

02 Dec '13

Hi, we're exporting a number of directories via samba shares. To manage access for individual users, the files are put into different groups, users who get access to the files will be put into the respective groups. It seems there's a limited number of groups that a user can be member of - googling around comes up with wildly different numbers from 16 up to 64k. The limit for CentOS seems to be around 32 ... can anyone confirm? Thanks, -dirk

1 1

CentOS-announce Digest, Vol 106, Issue 1
by centos-announce-request＠centos.org 02 Dec '13

02 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1775 CentOS 5 grub Update (Johnny Hughes) 2. Release for CentOS-6.5 i386 and x86_64 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 29 Nov 2013 14:49:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1775 CentOS 5 grub Update To: centos-announce(a)centos.org Message-ID: <20131129144959.GA4761(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1775 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1775.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7f15d4ed0d3f92bfcc61a2c3e056a285b26079913dd732bb2d475d0b130c84ff grub-0.97-13.11.el5_10.1.i386.rpm x86_64: c269b955ada5cf7d556454a212a8de79a01578ed49e9592dee32bc996a2317c6 grub-0.97-13.11.el5_10.1.x86_64.rpm Source: 6dadb3df15630ba857e7cb7ab6fbbcc8148cda833ead5e4f757cedd542cdec84 grub-0.97-13.11.el5_10.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Sun, 01 Dec 2013 16:03:27 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Release for CentOS-6.5 i386 and x86_64 To: CentOS Announcements List <centos-announce(a)centos.org> Message-ID: <529B5DCF.2070400(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 We are pleased to announce the immediate availability of CentOS-6.5 install media for i386 and x86_64 Architectures. Release Notes for 6.5 are available at http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.5 - we recommend everyone looks through those once. CentOS-6.5 is based on the upstream release EL 6.5 and includes packages from all variants. All upstream repositories have been combined into one, to make it easier for end users to work with. There are many fundamental changes in this release, compared with the past CentOS-6 releases, and we highly recommend everyone stufy the Release Notes as well as the upstream Techical Notes about the changes and how they might impact your installation. All updates released since upstream 6.5 release are also released to the CentOS-6.5 mirrors. Everyone who has centos-cr repositories enabled and in use, would already be running CentOs-6.5 as of one week ago and will notice only the centos-release rpm update today. +++++++++++++++++++++++ Upgrading from CentOS-4 or CentOS-5: We recommend everyone run through a reinstall rather than attempt an inplace upgrade from CentOS-4 or CentOS-5. +++++++++++++++++++++++ Upgrading from CentOS-6.0 / 6.1 / 6.2 / 6.3 or 6.4 Unless you have edited your yum configs, a 'yum update' should move your machine seamlessly from any previous CentOS-6.x release to CentOS-6.5 +++++++++++++++++++++++ Downloading CentOS-6.5 for new installs: When possible, consider using torrents to run the downloads. Usually its also the fastest means to download the distro. Torrent files for the DVD's are available at : http://mirror.centos.org/centos/6.5/isos/i386/CentOS-6.5-i386-bin-DVD1to2.t… http://mirror.centos.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-bin-DVD1t… You can also use a mirror close to you : http://www.centos.org/modules/tinycontent/index.php?id=30 Most mirrors will allow direct DVD downloads over http, ftp and rsync. Please keep in mind that not all mirrors are currently updated, some might take upto another 24 hours before they have all the content. We have also made efforts to try and ensure that most install types and roles can be run from DVD-1 itself. +++++++++++++++++++++++ sha1sum for the CentOS-6.5 ISOS: i386: 67ea68068ae53d1f23431072ec0288b3e1abfe4d CentOS-6.5-i386-bin-DVD1.iso 70fe3b01ce8133fa7e6e7dbfcb9f1acdb1e9981f CentOS-6.5-i386-bin-DVD2.iso 3cf41ef12362ad363ff0650c703d3d045bcbfa7a CentOS-6.5-i386-LiveCD.iso 73d6444e2576e1169035d2444f872ff622ed85b6 CentOS-6.5-i386-LiveDVD.iso 4f900bba81d0e3c5cc5354a94984ed2fa03d4061 CentOS-6.5-i386-minimal.iso e2e637dfbb08c04a478362733ee906ba9485771d CentOS-6.5-i386-netinstall.iso x86_64: 32c7695b97f7dcd1f59a77a71f64f2957dddf738 CentOS-6.5-x86_64-bin-DVD1.iso 25e5de362ba6c75d793dbeb060b27ba1865cb5df CentOS-6.5-x86_64-bin-DVD2.iso 690ccc84926a46152543a3cad57d983c9004638d CentOS-6.5-x86_64-LiveCD.iso 3ac5eb9a6dcbf5f2b4cfd2432cccd84cd722840d CentOS-6.5-x86_64-LiveDVD.iso f21a71e8e31df73297bdd1ccd4a64a36831284bd CentOS-6.5-x86_64-minimal.iso 3a9662cb65f9d59677d76acfdb73289da43b4599 CentOS-6.5-x86_64-netinstall.iso +++++++++++++++++++++++ LiveCD and LiveDVD LiveCD and LiveDVD media is also released into the ISOS/ directory. You can download these from either a mirror close to you or the torrents listed here : http://mirror.centos.org/centos/6.5/isos/i386/CentOS-6.5-i386-LiveCD.torrent http://mirror.centos.org/centos/6.5/isos/i386/CentOS-6.5-i386-LiveDVD.torre… http://mirror.centos.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-LiveCD.to… http://mirror.centos.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-LiveDVD.t… +++++++++++++++++++++++ Cloud Images Images for various on-preimse and off-premise Cloud environments are currently under development for CentOS-6.5 and will be released in the coming days. Everyone looking to join and help with the CentOS Cloud efforts is encouraged to join the CentOS-Virt list where such issues are discussed ( http://lists.centos.org/mailman/listinfo/centos-virt ). +++++++++++++++++++++++ Getting Help: The best place to start when looking for help with CentOS is at the wiki ( http://wiki.centos.org/GettingHelp ) which lists various options and communities who might be able to help. If you think there is a bug in the system, do report it at http://bugs.centos.org/ - but keep in mind that the bugs system is *not* a support mechanism. +++++++++++++++++++++++ Metups and training sessions The next CentOS Dojo is going to take place at Austin, TX, USA on the 6th December 2013. Details on the day, venue and registration are available at http://wiki.centos.org/Events/Dojo/Austin2013 As 2014 comes up, we've started planning for the Dojo Schedules for the next year. If you would like to get involved in helping organising, running, presenting or sponsoring a Dojo or even just want more detail do get in touch with us at the CentOS Promo list (http://lists.centos.org/mailman/listinfo/centos-promo) +++++++++++++++++++++++ Contributing and joining the project: We are always looking for people to join and help with various things in the project. If you are keen to help out a good place to start is the wiki page at http://wiki.centos.org/Contribute . If you have questions or a specific area you would like to contribute towards that is not covered on that page, feel free to drop in on #centos-devel(a)irc.freenode.net for a chat or email the centos-devel list (http://lists.centos.org) +++++++++++++++++++++++ Thanks to everyone who contributed towards making CentOS 6.5, specially the effort put in, as always, by the QA and Build team. A special shout out to all the donors who have contributed hardware, network connectivity, hosting and resources over the years. The CentOS project now has a fairly well setup resource pool, purely thanks to the donors. Enjoy! - -- Karanbir Singh <kbsingh(a)centos.org> The CentOS Project {http://www.centos.org} irc: z00dax(a)irc.freenode.net ( #centos, #centos-devel ) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlKbXc8ACgkQMA29nj4Tz1tsdACgqvWoCBaV/Eiplg28cYaxs6Jp rsEAnjfC+qLkGr+3bArO/UZKkyGO3lav =Qq62 -----END PGP SIGNATURE----- ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 1 ***********************************************

1 0

Re: [CentOS] Thank You To The CentOS Team
by diegors＠gmail.com 02 Dec '13

02 Dec '13

http://www.centos.org/modules/tinycontent/index.php?id=23 Sorry for TP ------Mensaje original------ De: EGO.II-1 Remitente: centos-bounces(a)centos.org Para: CentOS mailing list Responder a: CentOS mailing list Asunto: Re: [CentOS] Thank You To The CentOS Team Enviado: 2 de dic de 2013 07:42 On 12/02/2013 01:54 AM, Rajagopal Swaminathan wrote: > Greetings, > > On Mon, Dec 2, 2013 at 8:26 AM, Mark LaPierre <marklapier(a)aol.com> wrote: >> Hey all you dedicated folks out there who support the CentOS project. >> Thank you all for your dedicated effort and the great deal of work to >> get the 6.5 release up and running. >> >> Thank you all! >> > +100 > > + 1 - CEntOS is "Da Bomb"!.....LoL! EGO II _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Diego Sanchez Sent from my mobile

1 0

centos at windows network
by Igor Littig 02 Dec '13

02 Dec '13

Hello everyone. When I try to view the windows network which I connected, the error "unable to mount share list from server" pops up. Once I tuned my firewall off, everything works fine. Does anyone know how to configure iptables in order to don't disable them. My current configuration of iptables is following: # Generated by iptables-save v1.4.7 on Sat Nov 16 11:06:35 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [6:360] -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -s 192.168.2.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT -A INPUT -s 192.168.2.0/24 -m state --state NEW -m udp -p udp --dport 445 -j ACCEPT -A INPUT -s 192.168.2.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT -A INPUT -s 192.168.2.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT -A INPUT -s 192.168.2.0/24 -m state --state NEW -m tcp -p tcp --dport 139 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT

2 1

Error in 6.5 release notes?
by Stephen Harris 01 Dec '13

01 Dec '13

> http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.5 Here it says "In addition to the samba4 RPM mentioned above" but, except for that line, samba isn't mentioned at all. Is this a legacy comment, or is information missing? -- rgds Stephen

3 4

Best way to install mock package
by H 01 Dec '13

01 Dec '13

Newcomer to Linux and Centos 6.4. What would be the best way to install mock on my Centos server? yum install mock does not recognize the package. Have already installed 'Developer tools' using yum groupinstall. Looking forward to recommendations, thank you.

3 2

Two queries: samba and usb
by Rajagopal Swaminathan 01 Dec '13

01 Dec '13

Greetings, I have two distinct queries 1. How to detect removal of external usb hard disk within a script and stop backup? 2. How to emulate vfs_recycle functionality of samba for bare metal linux box using script? -- Regards, Rajagopal

2 1

Re: [CentOS] Old hardware, newer kernels
by Andrew Holway 30 Nov '13

30 Nov '13

Unless you are just running some home server or something the general idea of servers is to provide uptime. Servers usually start dying after about 3 to 6 years* and, if you are trying to provide uptime, searching around on ebay for someone that has a PATA hard drive, DDR memory or some ancient pcix controller will severely dent this objective. I agree that its a shame that so much of this ends up in landfill. The fact that chassis are not normally immediately reusable is a tragedy in my eyes but running old, junk equipment is even more of a tragedy when it breaks and people are relying on it. *I work a lot in HPC where servers are hammered to death. On 30 November 2013 14:33, Steve Clark <sclark(a)netwolves.com> wrote: > On 09/24/2013 03:55 PM, Lists wrote: >> On 09/19/2013 08:26 PM, Ashley M. Kirchner wrote: >>> It works for what it does. And I'm completely prepared to freeze it as far >>> as software goes. I was just curious what may have happened after that >>> particular version of the kernel, and whether there's something else I can >>> do, or call it done, slap a red sticker on it that read, "DON'T EVER >>> UPGRADE ANYMORE" and call it done. >>> >> For what it's worth, we have a single-core P3 running the latest >> Centos6/32 without issue. I realize that from a processing power stand >> point my SIP phone is probably faster, but like Ashley, it does a job >> and very well at that. (network monitor) >> >> [root@edison ~]# cat /proc/cpuinfo >> processor : 0 >> vendor_id : GenuineIntel >> cpu family : 6 >> model : 7 >> model name : Pentium III (Katmai) >> stepping : 3 >> cpu MHz : 498.456 >> cache size : 512 KB >> fdiv_bug : no >> hlt_bug : no >> f00f_bug : no >> coma_bug : no >> fpu : yes >> fpu_exception : yes >> cpuid level : 2 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov >> pse36 mmx fxsr sse up >> bogomips : 996.91 >> clflush size : 32 >> cache_alignment : 32 >> address sizes : 36 bits physical, 32 bits virtual >> power management: >> >> [root@edison ~]# cat /proc/version >> Linux version 2.6.32-358.18.1.el6.i686 >> (mockbuild(a)c6b10.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red >> Hat 4.4.7-3) (GCC) ) #1 SMP Wed Aug 28 14:27:42 UTC 2013 >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos >> > What is with people these days? Why if something works but it is old do people > want to say OMG you need new hardware? > > -- > Stephen Clark > *NetWolves* > Director of Technology > Phone: 813-579-3200 > Fax: 813-882-0209 > Email: steve.clark(a)netwolves.com > http://www.netwolves.com > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

1 0

Old hardware, newer kernels
by Ashley M. Kirchner 30 Nov '13

30 Nov '13

I have an old server (old hardware) that's been running 6.4 with kernel 2.6.32-279.19.1.el6.i686, no problem. Except, any kernel update after that causes it not to boot anymore. All I get is a blinking cursor on the screen, nothing else. Is this the end of this hardware, no more kernel updates after this? For reference, these are all the options that kernel is booting up with (lines wrapped on purpose): title CentOS (2.6.32-279.19.1.el6.i686) root (hd0,0) kernel /boot/vmlinuz-2.6.32-279.19.1.el6.i686 ro \ root=UUID=3f79e6b6-7845-499f-b708-aef782602673 rd_NO_LUKS rd_NO_LVM \ rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 \ KEYBOARDTYPE=pc KEYTABLE=us noapic apm=off ide=nodma acpi=off \ crashkernel=auto rhgb quiet selinux=0 initrd /boot/initramfs-2.6.32-279.19.1.el6.i686.img

8 13

Multicast routing daemon
by Ian Pilcher 30 Nov '13

30 Nov '13

Is there a multicast routing daemon included in CentOS or EPEL? (Seems like a weird question to even have to ask, but I can't seem to find one.) Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com Sent from the cloud -- where it's already tomorrow ========================================================================

1 0

Filesystem labeling confusion or mess up
by Götz Reinicke - IT Koordinator 29 Nov '13

29 Nov '13

Hi, I do have an iscsi storage with two raidsets. I'm logged in to the target and get two devices: /dev/sdb and /dev/sdc. After formatting the devices with ext4 I realised, that I had used a wrong label, so I tried to relabel the devices. But now I'm confused: doing a e2label /dev/sdb or /dev/sdc returns always the same label name for both devices. so I did "e2label /dev/sdb students" and "e2label /dev/sdc staff" and now mounting the devices shows the same filesystem under sdb and sdc! Looks like sdc (an empty device) is gone... Any suggestions or explanations? Thanks and best regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

3 4

Machine check events
by Glenn Eychaner 28 Nov '13

28 Nov '13

On my new Haswell-based machines, I am occasionally seeing entries like the following in /var/log/messages: kernel: [Hardware Error]: Machine check events logged (I would not have even noticed them, except that they get flagged by logwatch.) These messages always occur alone, and don't seem to have a corresponding entry in any other log file in /var/log. How can I get more info about these messages? Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

7 11

Ultrabook for CentOS?
by Nux! 28 Nov '13

28 Nov '13

Hello, I need to buy an ultrabook. Any recommendations for something that would work out of the box more or less? I do not want a Chromebook (or anything ARM) or one of these new "touch" laptops, in fact I'm after a nice matte screen. Budget is modest-ish (£500/$800) so dont go crazy. :) Thanks! -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro

7 9

nss_ldap loop sleeping after ...
by aurfalien 28 Nov '13

28 Nov '13

Hi, I rebooted a old Centos 5 box and now its stuck in an ever increasing timeout loop; nss_ldap: reconnecting tl LDAP server (sleeping # seconds).... This happens before network services starts. Any one know how I can break out of this? I tried booting in single user mode from the grub menu but no dice, the thing keeps nss_ldap looping. Thanks in advance, - aurf

3 2

LSB Certification
by Mark LaPierre 28 Nov '13

28 Nov '13

Hey All, Could someone provide a URL to a page that states what LSB level RHEL/CentOS 6.4 is certified to. I'm looking to download a driver: http://www.openprinting.org/printer/Epson/Epson-WorkForce_1100 They offer a driver for LSB 3.1 or LSB 3.2. I'm hoping that one of those applies to CentOS 6.4. -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

3 2

Question on list of packages on centos 7
by Jerry Geis 27 Nov '13

27 Nov '13

Is there a way to get a list of packages AND version of that package in centos/redhat 7? Perhaps from one a beta of 7 or something? I searched for "list of packages in redhat 7" and I can get a list but the list did not have any version information just the package name and description. Not off topic just "future" topic. Thanks, everyone have a great Thanksgiving! jerry

2 1

complicated svn, apache, krb5 and selinux problem
by m.roth＠5-cent.us 27 Nov '13

27 Nov '13

CentOS 6.4. We've got a subversion repo on a server. Currently, it's set to use krb5. Trouble is, the krb5.conf is set up to use pcscd authentication (using PIV cards). Whether anything else on the server needs it, it appears that when people issue certain svn commands (I haven't nailed down which), the thing tries to look at the pcscd.pid... and selinux complains that this is naughty. (We're in permissive mode.) I don't know deeply enough if anything else really needs to do this on the server, but I'd like to fix it so that doing svn stuff does *not* invoke that call. It *appears* if I comment out the pkinit_identities, we don't get the error (for obvious reasons). Ideally, I'd like to find some way to configure subversion - maybe in the /etc/httpd/conf.d/subversion.conf - so that it doesn't try that, but we *do* want it to do password krb5 authentication. Does this make sense? If so, is it do-able? mark, back at googling

1 0

Thanks for the CR packages!
by Paul Heinlein 27 Nov '13

27 Nov '13

Thank you, developers, for the continuous release packages. It's nice to get a head start on testing 6.5 for wider release. So far -- one VM, one dev server -- so good! -- Paul Heinlein heinlein(a)madboa.com 45°38' N, 122°6' W

2 1

Where Did The Disk Go???
by Gene Poole 27 Nov '13

27 Nov '13

I'm running CentOS 5.9 x86_64 on a machine I built myself that has 6 SATA II hard drives (4 - 1 TB drives; 2 - 1.5 TB drives) all in several RAID-1 arrays. These arrays were created when I did the original installation with CentOS 5.1 and each created partition (both standard and LVM) were built raid 1. Due to some things happening around the house that required most of my attention, I saw some alerts concerning drive /dev/sdb but I didn't have time to address it and since I am running raid 1... One of the tings that happened was my home took a lightening strike and we were down for 4 days. When we got our electricity back and I brought the machine back up I noticed that there were only 5 drives listed and I wasn't getting any more alerts. What was /dev/sdb was no longer listed with any command (fdisk; cat /proc/mdstat; mdadm --list). I do have a spare drive and my questions are: Anyone know how I can find the serial number of the bad drive? Once replaced, what is the best way to get the partitions recreated? Thanks, Gene Poole

3 2

CLI speed tester for CentOS?
by Timothy Murphy 27 Nov '13

27 Nov '13

I'd like to run a CLI broadband speed tester on my CentOS server. I downloaded "tespeed" from <http://sourceforge.net/projects/tespeed/>. This ran fine under Fedora-19, but failed under CentOS with the message "# reject large message", although from a quick look at the source it did not seem to be using a large test-file. Does anyone know of an alternative CLI speed-tester for CentOS? Or how to get this one to work under CentOS? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

3 2

$300 desktops? Where? - was: died again
by James B. Byrne 27 Nov '13

27 Nov '13

On Tue, November 26, 2013 18:58, Michael Hennebry wrote: > > $300 desktops? Where? > http://www.ebay.com/itm/HP-Compaq-DC5700-SFF-Desktop-PC-w-Intel-Core-2-E630… Shipping will probably cost you more that the system but even with that added the total will likely be less than $200.00. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Most efficient way to create a CentOS 3 test VM
by Warren Young 27 Nov '13

27 Nov '13

I'm about to create a new CentOS 3 VM for testing, since we still have a bunch of deployed machines running that OS. (Don't yell at me about using old OSes. These machines won't get "un-deployed" until they fall over dead of natural causes. Until the last one dies, we need test and build VMs around to service them.) I have the CentOS 3.9 *.iso files plus a local cache of RPMs against 3.9 that is probably incomplete relative to the vault[*]. It seems wasteful to install the last published version of the OS, then scp over my local update RPMs, freshen from those, *then* check with the vault for yet more updates. What I'm hoping for is some way to get a "CentOS 3.10", being 3.9 with the vault updates directory contents merged in. Is there a straightforward way to do that, or is schlepping around folders full of RPMs actually the best way to go? [*] http://vault.centos.org/3.9/updates/i386/RPMS/

7 7

Unsupported Hardware that works fine?
by Lists 26 Nov '13

26 Nov '13

I recently purchased a set of ASRock Intel i5 MB/CPU combos for a budget compute cluster. Every time we load up a system and try to boot with a recent EL6/64 ISO, we get a message that reads: > This hardware (or a combination thereof) is not supported by CentOS. For more > information on supported hardware, plesae refer to http://www.centos.org/hardware Not only does the hardware *seem* to work to expectations, but the url referenced goes to 404! Having loaded CentOS6 on many systems without ever seeing this message, I have to ask how to determine what might be triggering it and whether or not I should be concerned? Thanks

5 6

partitionless installation
by Халезов Иван 26 Nov '13

26 Nov '13

Hello All! I have a lot of virtual machines with KVM hypervizor. For VM's disks I use LVM Volumes. It's more suitable to install virtual machines direct to the LV-volumes without making partition tables inside the LV. In this case it is very simple to perform online-resizing and mount snapshots in host system to perform backups. So, my question is: Is it possible to install CentOS 6 without disk partitioning? -- With best regards, Khalezov Ivan

4 5

CentOS-announce Digest, Vol 105, Issue 11
by centos-announce-request＠centos.org 26 Nov '13

26 Nov '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:X013 Important Xen4CentOS xen Security Update (Johnny Hughes) 2. CESA-2013:X014 Important Xen4CentOS libvirt Security Update (Johnny Hughes) 3. CEEA-2013:X015 Xen4CentOS kernel Enhancement Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Nov 2013 14:27:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:X013 Important Xen4CentOS xen Security Update To: centos-announce(a)centos.org Message-ID: <20131125142712.GA43146(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X013 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- f3725f9d29b2fd85d3c9568d979b7ea0f26e1844bb7474b8ef4de2e124bae9ff xen-4.2.3-25.el6.centos.alt.x86_64.rpm b8a518ca3807067471d7397481d9ebcb11f1dda80945bf40a34b8c6fd76cdf6b xen-devel-4.2.3-25.el6.centos.alt.x86_64.rpm 71622b65300a17b2bb6d5758e2bbe5ec158a429446b6dff875874641eba585bc xen-doc-4.2.3-25.el6.centos.alt.x86_64.rpm eb4ea62e3455e39df2f468b224a15a30e0f61f5e0ad3e0996244aa1c42c611d3 xen-hypervisor-4.2.3-25.el6.centos.alt.x86_64.rpm e0fe32ba2d7012cc69ac0b5c188abe949c2fb222b177be8c980ed83317eccb93 xen-libs-4.2.3-25.el6.centos.alt.x86_64.rpm 3a566e7a2040f3373285245f7f7c726a597d8de35dec8f601eb2863b432ab3b2 xen-licenses-4.2.3-25.el6.centos.alt.x86_64.rpm 80571d5031b23f6feca314d6b66838b4ba8e0e5e12845b1f3a69df8fd03ff9d5 xen-ocaml-4.2.3-25.el6.centos.alt.x86_64.rpm ef16ee93f197961a3f8fb514816170c23e66a3fa74354c4e78959759b43b19df xen-ocaml-devel-4.2.3-25.el6.centos.alt.x86_64.rpm 22692e325f8ab867730e51570b3cc3977f4c64416c9f38ad0897716d8152a739 xen-runtime-4.2.3-25.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- d9db3406ff206cd8be106a63712df1c5daacd9d437fc88fb75f523476d60c840 xen-4.2.3-25.el6.centos.alt.src.rpm ===================================================== xen Changelog info from the SPEC file: * Sat Nov 23 2013 Johnny Hughes <johnny(a)centos.org> - 4.2.3-25.el6.centos - Roll in patch 145 and 146 for XSA-75 (CVE-2013-4551), XSA-78 (CVE-2013-6375) * Mon Nov 04 2013 Johnny Hughes <johnny(a)centos.org> - 4.2.3-24.el6.centos - Roll in patches 134 to 141, 143 to 144 for the following XSAs: - XSA-62 (CVE-2013-1442), XSA-63 (CVE-2013-4355), XSA-72 (CVE-2013-4416) - XSA-64 (CVE-2013-4356), XSA-66 (CVE-2013-4361), XSA-67 (CVE-2013-4368) - XSA-68 (CVE-2013-4369), XSA-69 (CVE-2013-4370), XSA-70 (CVE-2013-4371) - XSA-73 (CVE-2013-4494) ===================================================== The following XSA info is available from the Xen site http://xenbits.xen.org/xsa/advisory-62.html http://xenbits.xen.org/xsa/advisory-63.html http://xenbits.xen.org/xsa/advisory-64.html http://xenbits.xen.org/xsa/advisory-66.html http://xenbits.xen.org/xsa/advisory-67.html http://xenbits.xen.org/xsa/advisory-68.html http://xenbits.xen.org/xsa/advisory-69.html http://xenbits.xen.org/xsa/advisory-70.html http://xenbits.xen.org/xsa/advisory-72.html http://xenbits.xen.org/xsa/advisory-73.html http://xenbits.xen.org/xsa/advisory-75.html http://xenbits.xen.org/xsa/advisory-78.html -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 2 Date: Mon, 25 Nov 2013 14:27:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:X014 Important Xen4CentOS libvirt Security Update To: centos-announce(a)centos.org Message-ID: <20131125142737.GA43154(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X014 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- ab3a48f7c3dbd4f47cd4676fff16282f852ccc230653fdc64b1e7ec6864fb04d libvirt-0.10.2.8-5.el6.centos.alt.x86_64.rpm 780981c95cbe4dd352b8ecbfd23bcd04abacb6f9a522e45f5dd890acb4bab87a libvirt-client-0.10.2.8-5.el6.centos.alt.x86_64.rpm bd57d22f0aff2276f3263fb0920614f3fa917a1b5baef37d1e411c131ae480a5 libvirt-daemon-0.10.2.8-5.el6.centos.alt.x86_64.rpm fbbec7851f73e9fee1d036a080af2c64df42d443452cdf5e9943070bcf4579fc libvirt-daemon-config-network-0.10.2.8-5.el6.centos.alt.x86_64.rpm df5b7c70bd4f2fa491701d092d29fc4ad8ce2a0cf0b349b0300d7452bdbfdde9 libvirt-daemon-config-nwfilter-0.10.2.8-5.el6.centos.alt.x86_64.rpm c6b232073043d4829b91533c7ba32ab772aaf28139b5e7973342ecb2b98f97b7 libvirt-daemon-driver-interface-0.10.2.8-5.el6.centos.alt.x86_64.rpm 33b62166a71a086f1a61a096710aca65061fa750025e12899da5ef7e74bfdb16 libvirt-daemon-driver-libxl-0.10.2.8-5.el6.centos.alt.x86_64.rpm fb1d37174690e4a96bfec95c2cabe56a65e185e0d096f3614fb435cc647e1c69 libvirt-daemon-driver-lxc-0.10.2.8-5.el6.centos.alt.x86_64.rpm 56d26c84705780c9c9c56f7469fb56d4ac7c9f801b406ff153878a4ddc6fb1d2 libvirt-daemon-driver-network-0.10.2.8-5.el6.centos.alt.x86_64.rpm 1fcadda32beaa6cb3d9059cb0ceaa04946f00947230faeede0d4a1b0b6f55af2 libvirt-daemon-driver-nodedev-0.10.2.8-5.el6.centos.alt.x86_64.rpm 39d8709453d808fea84257e6cc3c13c5e94e3b4cd0728c6f12653b9aed0fb416 libvirt-daemon-driver-nwfilter-0.10.2.8-5.el6.centos.alt.x86_64.rpm 940af268c17c9beaf891edb6df16361d7f5ba59665c4b6ab4a87b92ec6b5d6b2 libvirt-daemon-driver-qemu-0.10.2.8-5.el6.centos.alt.x86_64.rpm d6ff73e1d643f904364b45f5476df098c6b7b81fc2f738cc8118e6977c8b58f0 libvirt-daemon-driver-secret-0.10.2.8-5.el6.centos.alt.x86_64.rpm f67bf0653579994a919839de854ef6c90429ae150fc6f5d4231fe650c3d42caa libvirt-daemon-driver-storage-0.10.2.8-5.el6.centos.alt.x86_64.rpm db24201784fa8704367b8e7b64fb2cad272262883b125a6e6fefe6d48f90a4c9 libvirt-daemon-driver-xen-0.10.2.8-5.el6.centos.alt.x86_64.rpm 1df91c45531c2eee12cbf477ece1056a66ea62f8a1190ac9c9c0006ef66eba10 libvirt-daemon-kvm-0.10.2.8-5.el6.centos.alt.x86_64.rpm b53d71dc6ae1c45f251f2fa04566c4ced34be07278813fb4489ad1bf26a9d709 libvirt-daemon-lxc-0.10.2.8-5.el6.centos.alt.x86_64.rpm 95e0b80e8ab2327e06ad741d0eda8e54e3b62cf8e8707eacb5927c7aa753bae6 libvirt-daemon-xen-0.10.2.8-5.el6.centos.alt.x86_64.rpm 1f0b1021d167b73ff0e96bc13a4d0484eb005f0a551baa6265c79b8d93174bd4 libvirt-devel-0.10.2.8-5.el6.centos.alt.x86_64.rpm 5c968c67c0fd8864a37d27f076b2dda9309ceb20d9909bbb6a6552426f3dbe97 libvirt-docs-0.10.2.8-5.el6.centos.alt.x86_64.rpm 224f5f9faec54b970bf5694614d74bfe9fbb136dab84871881c5de88d22fd75f libvirt-lock-sanlock-0.10.2.8-5.el6.centos.alt.x86_64.rpm 214db0e8afe97848c741f195debd4a70864563963da71940e94c636cb57e4028 libvirt-python-0.10.2.8-5.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 0736cb1d219fa72766c235c46fc58e356e96eec4324ca1d6503911ad64746398 libvirt-0.10.2.8-5.el6.centos.alt.src.rpm ===================================================== libvirt Changelog info from the SPEC file: * Tue Nov 05 2013 Johnny Hughes <johnny(a)centos.org> 0.10.2.8-5.el6.centos.alt - upgrade to upstream version 0.10.2.8 - reomve patches 403, 404, 405 as they are rolled in upstream - added patch 406 from the from libvirt 0.10.2-maint channel - CVE-2013-4296 is addressed in this update ===================================================== The following Security issues are addressed in this release: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-4296 -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 3 Date: Mon, 25 Nov 2013 14:30:21 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:X015 Xen4CentOS kernel Enhancement Update To: centos-announce(a)centos.org Message-ID: <20131125143021.GA43191(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:X015 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- c0e393639da8712303ae87a379fbc7584b4a5b20229473c73e640653702da4db e1000e-2.5.4-3.10.20.2.el6.centos.alt.x86_64.rpm 436669a1b8d5a71a7b6f8432dc05916d1779a7d0a3cc78221a2be147756bda85 kernel-3.10.20-11.el6.centos.alt.x86_64.rpm 9d30f870eebed13633a29ba7f57807e82486da0e29b51bbfe9e56feb76623b6b kernel-devel-3.10.20-11.el6.centos.alt.x86_64.rpm c29b37bd41b8e15476e62a5319fce3cdd1dc6705089ac8101d28c5cab5a29b6d kernel-doc-3.10.20-11.el6.centos.alt.noarch.rpm 18d0d9236fe801263004f8481256b1c991f9b5139fa432e8620dbc3a27978ea6 kernel-firmware-3.10.20-11.el6.centos.alt.noarch.rpm 080b1a8904625d50e83cfcebc7c36551c7a2d3e05292a438204042b6c99dc0a8 kernel-headers-3.10.20-11.el6.centos.alt.x86_64.rpm d1d510730f6fd668bd93be42cb5cc178504352b2603e7e383de0219c1f27aa64 perf-3.10.20-11.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 95bcf551904667c4e5753da1b800febfac0319585a5702e896ca6b41065b3730 e1000e-2.5.4-3.10.20.2.el6.centos.alt.src.rpm 2ab3e14b38837b5239cf01d30f8fa72a20ea2956a9758a7a771e162aa128fe57 kernel-3.10.20-11.el6.centos.alt.src.rpm ===================================================== Kernel Changelog info from the SPEC file: * Sat Nov 23 2013 Johnny Hughes <johnny(a)centos.org> 3.10.20-11 - modified patch patch130 to add all bnx2 drivers * Sat Nov 23 2013 Johnny Hughes <johnny(a)centos.org> 3.10.20-10 - upgraded to upstream version 3.10.20 - removed sources 4, 5, 6, and 7 to instead roll in all bnx2 and bnx2x firmware files instead of doing them individually - created sources 8 and 9 that are tarballs of the latest bnx2 and bnx2x firmware files from kernel.org - modified to spec file to extract sources 8 and 9 and build all fw files in bnx2 and bnx2x dirs * Wed Nov 13 2013 Johnny Hughes <johnny(a)centos.org> 3.10.18-10 - upgraded to upstream version 3.10.18 - modified/enabled patch130 to work with the 3.10.x tree (new broadcom drivers) * Tue Nov 12 2013 Johnny Hughes <johnny(a)centos.org> 3.10.12-10 - Move to the 3.10.12 LTS Kernel - add /etc/bash_completion.d/perf to the kernel-perf package - removed all patches except 118 and 119 to add blktap25 as they are upstream - modified patches 118 and 119 to apply to the 3.10.x kernel tree e1000e Changelog info from the SPEC file: * Mon Nov 25 2013 Johnny Hughes <johnny(a)centos.org> - 2.5.4-3.10.20.2.el6.centos.alt - build against version 3.10.20 kernel ===================================================== NOTE: This is a rebase of the kernel for the Xen4CentOS6 project from the 3.4.x LTS tree to the 3.10.x LTS tree. NOTE: You must run /usr/bin/grub-bootxen.sh to update the file /boot/grub/grub.conf (or you must update that file manually) to boot the new kernel on a dom0 xen machine. See for info: http://wiki.centos.org/HowTos/Xen/Xen4QuickStart -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 105, Issue 11 ************************************************

1 0

Captive Portal
by Ken Smith 26 Nov '13

26 Nov '13

Hi All, I'm trying to set up a Captive Portal using a Centos6 box. I've been experimenting with WiFiDog but it looks like development has faltered and I'm chasing my tail getting all the bits of PHP together for it to run. Some bits I've got look like Alpha code. What I'm trying to accomplish is a a simple firewall type system for a public WiFi, that redirects users to a Web page when they first connect, accepts some credentials such as an e-mail address and allows them access to the 'net. Other features like limiting the volume of download and some kind of porn filter would be good. Anyone doing anything like this care to share what they use. Many thanks Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 3

iMac triple boot including CentOS 6.4
by Wes James 26 Nov '13

26 Nov '13

-How to install CentOS on 27” imac (Mid 2010 - 2.93 Ghz, i7, 8gig ram) with OS X and Xubuntu 13.04 already installed Assumed - OS X and Xubuntu already installed and rEFIt already installed in OS X with the line towards the bottom of: /efi/refit/refit.conf set to: default_selection L on the mac root partition so Linux will boot by default -Boot centos 6.4 lived dvd and install btrfs tools from installer then run these commands to resize btrfs partition (changing size to fit your needs): ( was testing btrfs so use the resize tool for your type of file system installed) # mkdir /media/b # mount /dev/sd(whatever) /media/b # btrfs filesystem resize -900g /media/b -Created a gparted boot disc from: http://gparted.org/download.php then booted from gparted Live-CD and resized partition -Booted back into xubuntu and ran update-grub - but it didn’t find centos -Now run upgrade from 13.04 to 13.10 ran update-grub again and now it sees Centos run vi /etc/default/grub.conf change GRUB_DEFAULT to GRUB_DEFAULT=6 run update-grub again reboot Now Centos will will show up in grub2 boot menu and be the default one selected If CentOS has a kernel change, update-grub must be run again in xubuntu. -Update system $ sudo yum update reboot --------------- Info above can be found here: https://sites.google.com/site/comptekkia/linux/how-to-install-centos-on-mid… Thanks, -wes

1 0

X11 connection rejected because of wrong authentication
by Timothy Murphy 26 Nov '13

26 Nov '13

I'd like to run SELinux on my CentOS server in enforcing mode, but I get the above message when I run sealert. I assume this is because I am accessing the server from my laptop? In any case, I googled for the message, and this threw up dozens of similar queries over many years. Most of the ones I read offered methods of avoiding the problem rather than solving it. Am I right in thinking the message arises from my remote connection? And if so, is there a simple solution? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

2 4

CentOS 6 : Network Interface Naming
by SilverTip257 25 Nov '13

25 Nov '13

Hello All, I have one CentOS 6 KVM virtualization server that I built around a year ago (best I can tell it was in October 2012) at which time I would have been installing 6.3 [0]. That particular install used the Consistent Network Device Naming [1] conventions (PCIe NICs are p1p1, p1p2). I started to build out a new KVM virt server (kickstarting a 6.4 install now as compared to 6.3 back then) and the interface names are back to the old ethX convention for the PCIe NICs. See below for my snippets from udev persistent rules on the two hosts. I'm working off of [older] Dell PowerEdge 2950 hardware that has dual onboard Broadcom NICs and an additional Intel Dual GigE PCIe NIC. ** Did anyone but me notice this change/regression in network interface naming? ** Does anyone know if or why a change was made from what 6.3 or earlier apparently defaulted to? This is by no means a major problem, but it did make me wonder what caused or why there was a change. [Of course I can change interface names in the udev rules if I chose to.] Thanks for your feedback! ================== Snippets: # was 6.3 when initially installed, but has been updated to 6.4 since then ~]# cat /etc/*ele* CentOS release 6.4 (Final) CentOS release 6.4 (Final) CentOS release 6.4 (Final) cpe:/o:centos:linux:6:GA ~]# egrep -v '^$|^#' /etc/udev/rules.d/70-persistent-net.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:22:19:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:22:19:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="p1p1" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="p1p2" ~]# lspci | grep Ether 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 0c:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 0c:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) # freshly installed 6.4 ~]# cat /etc/*ele* CentOS release 6.4 (Final) CentOS release 6.4 (Final) CentOS release 6.4 (Final) cpe:/o:centos:linux:6:GA ~]# egrep -v '^$|^#' /etc/udev/rules.d/70-persistent-net.rules SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:22:19:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:22:19:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" ~]# lspci | grep Ether 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) [0] https://access.redhat.com/site/articles/3078 [1] https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux… -- ---~~.~~--- Mike // SilverTip257 //

5 6

intel
by madunix＠gmail.com 25 Nov '13

25 Nov '13

I am in the process of getting multiple Desktops to run linuxfor Research and Development, at the moment am comparing the following intel chipset H81, Q87, Q77, H61...What is the difference?What would be best performance issue?

3 4

Wrap around to first/last work space
by Wes James 25 Nov '13

25 Nov '13

Is there a way to get CentOS 6.4 to wrap from last to first or first to last workspace when moving with ctl-alt left/right arrow? I right clicked on the workspace view at the bottom right and selected Preferences, but there are now options for that. Thanks, -wes

3 10

ltsp & Selinux
by Johan Vermeulen 25 Nov '13

25 Nov '13

Hello All, I set up ltsp regulary, on Centos6 machines. This morning I have a Selinux problem that usualy does not occur: after setting everything up, the thinclients boot, but nobody can login. It only works after the command : # echo 0 > /selinux/enforce I tried this semanage command: # semanage fcontext -a -t bin_t /usr/bin/xauth but it makes no difference. The message I'm now seeing in /var/log/audit/audit.log : type=AVC msg=audit(1385112688.399:67769): avc: denied { write } for pid=8218 comm="xauth" name="caw" dev=md1 ino=262145 scontext=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1385112688.399:67769): arch=c000003e syscall=2 success=no exit=-13 a0=7fffdecf5c60 a1=c1 a2=180 a3=8 items=0 ppid=8217 pid=8218 auid=500 uid=500 gid=500 euid=500 suid=500 fsuid=500 egid=500 sgid=500 fsgid=500 tty=(none) ses=9 comm="xauth" exe="/usr/bin/xauth" subj=unconfined_u:unconfined_r:xauth_t:s0-s0:c0.c1023 key=(null) Can anybody help me overcome this without disabling Selinux? Many thanks. Greetings, J. -- Johan Vermeulen IT-medewerker Opensource Software is the future.

3 5

Google Chrome
by Michael B Allen 25 Nov '13

25 Nov '13

I have been using CentOS on my laptop for a few days now and it works great! Great work-around for the Fedora GNOME 3 debacle. But I'm starting to miss Google Chrome pretty seriously. Firefox is just not what it once was. It's slow. Spell check is weak. Sometimes it straight up fails to display pages after going "back". There are numerous details like this that just make FF almost intolerable. And based on current browser usage statistics I don't think I'm the only one who sees the difference which means the problem is only going to get worse. Unfortunately Chrome is not available for CentOS 6.4: Error: Package: google-chrome-stable-31.0.1650.57-1.x86_64 (google-chrome) Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit) This page [http://www.muktware.com/2013/02/google-says-red-hat-enterprise-linux-6-is-o…] claims: "Chrome, the browser in question here, is based on the open source project Chromium. Chromium developers seems to prefer the new C++11 for the obvious security reasons and ease of maintenance but it also means adopting a new toolchain and upgrading to GCC 4.6. This makes it hard to support those operating systems that ship with older C++ standard libraries. RHEL 6, among many others, is one such operating system." What is the safest path out of this problem? I am not particularly excited about running a package from a small third party. Particularly a browser. Is this situation really that bad? Mike

11 14

Re: [CentOS] X11 connection rejected because of wrong authentication
by James B. Byrne 25 Nov '13

25 Nov '13

On Sun, November 24, 2013 20:08, Timothy Murphy wrote: > I'd like to run SELinux on my CentOS server in enforcing mode, > but I get the above message when I run sealert. > I assume this is because I am accessing the server from my laptop? > > In any case, I googled for the message, > and this threw up dozens of similar queries over many years. > Most of the ones I read offered methods of avoiding the problem > rather than solving it. > > Am I right in thinking the message arises from my remote connection? Yes. It arises from your ssh connection. You are probably using the -Y or -X option with xauth. > And if so, is there a simple solution? Perhaps. The error you have is caused by one of two things: 1. incorrect SELinux settings on the ~/.Xauthority file or your home directory. Run restorcon -vR ~ to fix those. 2. incorrect ownership or permissions on ~/.Xauthority. The second condition can also be triggered by logging in via ssh as one user and su -l to another on the remote host. In my case I find that the second circumstance is the most frequent cause of the exact error you report. HTH -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Re: [CentOS] Any experience with lanner appliances?
by John Doe 25 Nov '13

25 Nov '13

From: Steve Clark <sclark(a)netwolves.com> > We have about 1000 FW-7535s (replaced by FW-7541) deployed using > CentOS 6.x. I finally chose to go with the microserver... I have a hard time finding a simple price for the lanner appliance (without having to fill some huge forms to get a quotation...) And last time, when I did find one price, it was more than $800 which feels too much for some "above average soho router like hardware". Thank you both for the info,JD

1 0

MultiTech MT5634ZBA usb modems
by Gregory P. Ennis 24 Nov '13

24 Nov '13

Everyone, I have a centos 5.10 machine set up to be a fax server using hylafax+ with three multitech MT5634ZBA modems. I am still in the testing phase of using this system for production, and during my tests I have detected a problem I have not been able to solve except for unplugging the modem from the usb port and plugging it back into the usb port. In the middle of a fax production of around 1,000 faxes the ttyACM0 device becomes disabled and disappears. I have only had this happen twice so I have not collected sufficient data to figure out what is happening. When I remotely reboot the os, the system comes up and ignores the modem that has become faulty, and of course ttyACM0 is assigned to a different modem. Has anyone had problems with the MT5634SBA modems, and if so what modems would you recommend by way of replacements. Is there a way to turn off a usb port so that I could power down the modem remotely, and then bring it back up. I think if I could do this, remotely, I may be able to save the use of these modems. Otherwise, I am going to be required to have someone unplug the modem and plug it back in to reset it in order to make it work. hylafax+ seems to be working fine, it just reports that the modem has become inaccessible. Any ideas? Thanks much, Greg Ennis

1 0

Postfix relay on Comcast
by Lists 24 Nov '13

24 Nov '13

How to get postfix working on CentOS 6 and Comcast. Recently, they've changed their policies regards email relay and require authentication even to send email. (they no longer use IP address ranges, presumably in an attempt to curb outgoing SPAM) I didn't see an updated howto anywhere on the Interwebs, thought I'd point out what I had to do. The part that had me stumped for longer than I care to admit was having to install cyrus-sasl-plain rpm - EL5 apparently had that installed as part of the cyrus-sasl package. 1) yum install postfix cyrus-sasl-plain; # note that cyrus-sasl-plain is NOT installed by default but is needed by this config. 2) Create file /etc/postfix/passwords. Replace "USERNAME" with your user name, and "password" with your password. Note: your username is typically your email address without the domain name. #---------------------------- smtp.comcast.net:587 USERNAME:password smtp.comcast.net USERNAME@comcast.net:password #---------------------------- 3) makemap passwords; 4) Edit /etc/postfix/main.cf #---------------------------- relayhost = [smtp.comcast.net]:587 smtpd_sasl_auth_enable = yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/passwords # note that with no security options on, we're using sasl-plain installed above. smtp_sasl_security_options = # You might need this, you may not. #sender_canonical_maps = regexp:/etc/postfix/sender_rewrite #---------------------------- 5) Create file /etc/postfix/sender_rewrite. Note that not all Comcast customers need this, I didn't when I authenticated as above. Obviously, replace "USERNAME" with your user name. #---------------------------- /^([^@]*)@.*$/ USERNAME(a)comcast.net #---------------------------- 6) service postfix stop; sleep 5; service postfix start

3 2

RAM Requirements
by Mark LaPierre 24 Nov '13

24 Nov '13

Hey Y'all, Does anyone know where I can look, please post a URL, where I can find out what the minimum system requirements are for CentOS 6.4? I've searched the CentOS.org web site for this but I've come up empty. I've got an old machine that had RH9 on it. The HD died so I had to replace that. Now I'm thinking that I want to install CentOS 6.4 on it but the minimal install disk says that I don't have enough RAM for it to do the install. -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

8 12

Re: [CentOS] EPEL problem
by Mark LaPierre 24 Nov '13

24 Nov '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/23/2013 07:42 PM, Reindl Harald wrote: > Am 24.11.2013 01:29, schrieb Mark LaPierre: >> On 11/23/2013 06:57 PM, Phil Dobbin wrote: >>> I'm trying to install the EPEL repo on a fully up to date >>> CentOS 6.4. I'm using wget to download from my usual source but >>> after I install it via `sudo rpm -ivh epel-xxxxx` it's not >>> actually there in `/etc/yum.repos.d`. >>> >>> Trying to install it again, Yum just tells me it's already >>> installed. >>> >>> I've no idea where it is installed if it is (which I don't >>> think it is) so I'm stumped. >>> >>> Any help appreciated. >>> >>> Cheers, >>> >>> Phil... >>> >> >> locate epel.repo > > does not help before the mlocate cronjob refreshed the database or > someone with knowledge does it by hand - no magic there > > "rpm -q --filesbypkg <packagename>" is the one and only correct > command and if there is no file in /etc/yum.repos.d it is *not* > installed > > [root@openvas:~]$ rpm -q --filesbypkg epel-release epel-release > /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 epel-release > /etc/rpm/macros.ghc-srpm epel-release > /etc/yum.repos.d/epel-testing.repo epel-release > /etc/yum.repos.d/epel.repo epel-release > /usr/share/doc/epel-release-6 epel-release > /usr/share/doc/epel-release-6/GPL > > Good point. - -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ **** -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJSkVWIAAoJEOKvcl2cb48H/S8H/R9J2FhVhjhZr61PNYhOOAaL 9k88Oqizg8URXVtB9zs9RCpfwqNRpKRfeEEcLfsriiu6JV9NFhqp+QLZMANcKIDv OBJ6zdpmIwZoTa8f3o1aSuJ3Zq6u3AioM5j0IonUu1OJLrLMI7d0lOUsVAypT6fH /jPpCA4Y23LVo+wC1YzSv3ObVMSD/BQXCAYU+mItwwQG16xxyRL7K3B7xbNMhgq8 7qLk0VXTbFWuq6NlpVaynN6r5itsibtZvz0lC6sr84MmR4tTUsohOumLlShBH/01 u0A8xGrbEZpjg0riqJm8oqFIa0amKtGxsk9CAEGQet9+Ed2qG0AdVEdjm4Ub/kk= =ATPa -----END PGP SIGNATURE-----

1 0

Crash and automatical reboot when using the NVIDIA card
by David McGiven 23 Nov '13

23 Nov '13

Hello there, I'm running a Supermicro server with the latest CentOS 6.4 versions (kernel : 2.6.32-358.23.2.el6.x86_64) and the latest nvidia driver (331.20). A few minutes after using the GPU for doing some HPC calculations, the server crashes and reboots itself. This is happening every time. I know it will be rebooted but I don't know when. Sometimes it's 20 minutes after starting using it. Sometimes it's 2 hours. If I unplug the GPU card and put some stress on the server, it works ok. So I suspect there's a bug in the kernel/nvidia driver. I can't find any messages on /var/log/messages. What should I do ? Should I file a bug on the centos bugtracking system ? Is there anyway I can gather more information ? The server is in a remote location so I have a hard time accessing the console. Thanks.

6 6

nfs4, idmapd, users with same name, different uid?
by Les Mikesell 22 Nov '13

22 Nov '13

Is idmapd supposed to work where users have different uid numbers on the nfsv4 server and client? It seems to show the right names for ownership on the client side, but if I automount a home directory, that user doesn't have permission to enter it, and if I change permission to allow access and create a new file, it shows on the server as owned by the uid number for the user on the client (and wrong on the server). Everything works like it would on nfs v3 where the uid numbers are the same on the client and server, but what's the point of the rpcidmapd daemon if it doesn't actually map the ids? -- Les Mikesell lesmikesell(a)gmail.com

5 12

SSSD with 389DS
by Mitja Mihelič 22 Nov '13

22 Nov '13

Hi! We are setting up an environment with two 389DS configured as master-consumer. The DIT holds about 70.000 user records. A couple of other machines running SSSD will be using the 389DS setup for all user info lookups that would normally go to passwd/shadow. There are also other applications that will be querying the 389DS for various other user data. All servers are running CentOS6. In total I would estimate that SSSD would be handling about 400 queries per second. How should I configure SSSD to get the most out of it? Cache refreshes, (negative) timeouts, expirations, enumerations? Regards, Mitja -- -- Mitja Mihelič ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia tel: +386 1 479 8877, fax: +386 1 479 88 78

1 0

dovecot informational/error messages?
by Timothy Murphy 22 Nov '13

22 Nov '13

I'm getting the message Nov 22 13:06:56 grover dovecot: imap-login: Disconnected (no auth attempts): rip=192.168.2.3, lip=192.168.2.5, TLS: Disconnected every second on my CentOS-6.4 server. Is this purely an informational message? Or is it an error message? And in either case, how can I stop the flood of messages? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

2 2

quota doesn't appear to work - repquota only updates when quotacheck is run
by Matt Garman 21 Nov '13

21 Nov '13

I have set up user quotas on an ext4 filesystem. It does not appear that the quota system is being updated, except when I manually run quotacheck. More detail: I run "warnquota -s" from a script in /etc/cron.daily. I noticed that no one had received an "over quota" message in a long time. Using "repquota -as", it indeed looked as though everyone was under their quotas. But "du" showed many people were over quota. So I did a "quotaoff -a ; quotacheck -vam ; quotaon -a". That night, several warnquota-generated messages went out. My users diligently cleaned up their homes. Fast forward 24 hours, and the users received the same warnquota emails. repquota showed them as being over, but "du" told a different story. System is CentOS 6.3, kernel 2.6.32-279.2.1.el6.x86_64. # dmesg | grep -i quota VFS: Disk quotas dquot_6.5.2 The partition is type ext4 mounted at /share: # cat /proc/mounts | grep share /dev/mapper/VolGroup_Share-LogVol_Share /share ext4 rw,noatime,nodiratime,barrier=0,nobh,data=writeback,jqfmt=vfsv0,usrjquota=aquota.user 0 0 The ext4 volume sits on top of an lvm logical partion. That logical volume ultimately sits on top of an encrypted disk using cryptsetup luksFormat: # lvscan ACTIVE '/dev/VolGroup_Share/LogVol_Share' [4.48 TiB] inherit # pvscan PV /dev/mapper/luks-7f865362-ee9f-40de-bc07-73701b4662f3 VG VolGroup_Share lvm2 [4.48 TiB / 0 free] Is there something in my ext4 mount options that is incompatible with quota? Or maybe the encrypted layer is causing problems? Am I missing something else? Thanks!

1 0

restarting network interface
by Wes James 21 Nov '13

21 Nov '13

I googled to see how I might restart the network interface in CentOS. I initially tried before googling: sudo service network restart I noticed that only the loopback interface was restarted. To confirm this I did: service network stop and then did ifconfig and the loopback info was gone. I then found ifconfig eth0 up/down and tried those and that did what I is was looking for. Why doesn't "service network restart" restart all interfaces? Thanks, -wes

4 6

CentOS still dies on me
by Michael Hennebry 21 Nov '13

21 Nov '13

Might this have something to do with the following boot message?: Starting virt-who: Traceback (most recent call last): File "/usr/share/virt-who/virt-who.py", line 33, in <module> from subscriptionmanager import SubscriptionManager, SubscriptionManagerError File "/usr/share/virt-who/subscriptionmanager.py", line 24, in <module> import rhsm.connection as rhsm_connection ImportError: No module named rhsm.connection ^[[60G[^[[0;31mFAILED^[[0;39m]^M Starting libvirtd daemon: ^[[60G[^[[0;32m OK ^[[0;39m] If not, I'd like to test the idea that my problem with Linux dying on me is that recent kernels do not like my computer. My most recent installation that still runs reliably is Fedora 14. If I copy a kernel from F14 into my CentOS installation, what else do I need to copy with it? I know that I will need to add to my grub.conf . -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "On Monday, I'm gonna have to tell my kindergarten class, whom I teach not to run with scissors, that my fiance ran me through with a broadsword." -- Lily

3 3

CentOS-announce Digest, Vol 105, Issue 10
by centos-announce-request＠centos.org 21 Nov '13

21 Nov '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1742 CentOS 6 sssd Update (Johnny Hughes) 2. CEBA-2013:1743 CentOS 6 openswan Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Nov 2013 11:52:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1742 CentOS 6 sssd Update To: centos-announce(a)centos.org Message-ID: <20131120115229.GA18235(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1742 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1742.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ddce6bc0558b5f37fb59251475484bbb8ce99443fb50e06c55be1a97db0af853 libipa_hbac-1.9.2-82.11.el6_4.i686.rpm c996a24335d4247783489d5d9a90546e7b75915d8da4156280ebb4beb4597ee7 libipa_hbac-devel-1.9.2-82.11.el6_4.i686.rpm 646f6fa1b1945da84cf06653c59d8d0e66379a657cbcbae58798bc0bf504f5fd libipa_hbac-python-1.9.2-82.11.el6_4.i686.rpm 53575332557d606c9defcbf343f916442411f0da2e5ea0a2a3479d459321b406 libsss_autofs-1.9.2-82.11.el6_4.i686.rpm 9aab095754f7cf564cd788ffbb95408e6fadcd2ae062591c29c197564a12b414 libsss_idmap-1.9.2-82.11.el6_4.i686.rpm 44b5b56961abee2d472e4fd52bcc63e6879d55da9ec48d2264e6dfa013143109 libsss_idmap-devel-1.9.2-82.11.el6_4.i686.rpm 9712346f670e4830117d8d9b5bcc9da9477b871552116d0e56684e053410ac50 libsss_sudo-1.9.2-82.11.el6_4.i686.rpm 6b3612672834b128fc7939c482cf41d795a7599c02aa0b39b57c0de6c8b733de libsss_sudo-devel-1.9.2-82.11.el6_4.i686.rpm 3c0c8f9739f1d89758b1a5f6c6664c3b69350f1af543e62094660edf7097d0ff sssd-1.9.2-82.11.el6_4.i686.rpm 0f5b93110bb3c7323644c029a8735f91e4146f329c91de012def70cd4c1d2b04 sssd-client-1.9.2-82.11.el6_4.i686.rpm 8ea1adc6958390c51ecd64e05ad80ed6e7259f79549e7099f6722ab612f40a8b sssd-tools-1.9.2-82.11.el6_4.i686.rpm x86_64: ddce6bc0558b5f37fb59251475484bbb8ce99443fb50e06c55be1a97db0af853 libipa_hbac-1.9.2-82.11.el6_4.i686.rpm 3fee7351eb65e965008a7d0f7386ad3a395f1c8eefee2406e15a3fedda0cf930 libipa_hbac-1.9.2-82.11.el6_4.x86_64.rpm c996a24335d4247783489d5d9a90546e7b75915d8da4156280ebb4beb4597ee7 libipa_hbac-devel-1.9.2-82.11.el6_4.i686.rpm e8b190f6fcb6d52448d1e9e717787191bcc8016827b5f7c13377a85258ff590c libipa_hbac-devel-1.9.2-82.11.el6_4.x86_64.rpm 7eddc5a6aeba405ef5b30d6c6e24ab664981f18a7d63e851434ff119ff93e88d libipa_hbac-python-1.9.2-82.11.el6_4.x86_64.rpm 8c7fa1244eb16efce4297c4fead439e0abdc26f7d4f4192886eb75f2c107ed8b libsss_autofs-1.9.2-82.11.el6_4.x86_64.rpm 9aab095754f7cf564cd788ffbb95408e6fadcd2ae062591c29c197564a12b414 libsss_idmap-1.9.2-82.11.el6_4.i686.rpm 110a93c7b2424d8f05dfcc243dfff47f8c890176cde9ec26319a7aa6d7b46967 libsss_idmap-1.9.2-82.11.el6_4.x86_64.rpm 6b2626e03d22badbc7fa563fa17d9edea972ed04577f528c2e98e0ba6c89393e libsss_idmap-devel-1.9.2-82.11.el6_4.x86_64.rpm baf586de660981f2d0f8ce866ac803459466cbac3d950d5dbcfc2610732692b4 libsss_sudo-1.9.2-82.11.el6_4.x86_64.rpm 1ca6a6c6f403d01e40ef9d556207d0dccafb1ff5e6a063068a92540a1d36ce4f libsss_sudo-devel-1.9.2-82.11.el6_4.x86_64.rpm 1ce157d624050d704084fc2b63bd3cfb62faccf33fcaee60c46ce615f47cdcbc sssd-1.9.2-82.11.el6_4.x86_64.rpm 0f5b93110bb3c7323644c029a8735f91e4146f329c91de012def70cd4c1d2b04 sssd-client-1.9.2-82.11.el6_4.i686.rpm 8226f08657c0d7dc9bf378a7ed1fb34c01e0911bdd3c97842c00b47ee3527103 sssd-client-1.9.2-82.11.el6_4.x86_64.rpm b76260d3022dd6d9b87b52d32a57c56b8d08837130c49c5375aef0d338fb76a4 sssd-tools-1.9.2-82.11.el6_4.x86_64.rpm Source: 0f78ec4c00193bcd2357a272b9ecbbbec033424a4f65b22295a92d73c398c1c2 sssd-1.9.2-82.11.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 20 Nov 2013 11:53:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1743 CentOS 6 openswan Update To: centos-announce(a)centos.org Message-ID: <20131120115332.GA18445(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1743 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1743.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aa48603335c8b220a8641b647067995fbb6ecef41ce48c2d4dbf47eaf46744ba openswan-2.6.32-21.2.el6_4.i686.rpm 8a8085f46be11b7309f1c88d968b06f236578abcac339301e11e5fbdc78d5c35 openswan-doc-2.6.32-21.2.el6_4.i686.rpm x86_64: 35ea7510ffb5c89fad948726a3290e4ee667a3ebe4956a6d206f63ad97bd8d93 openswan-2.6.32-21.2.el6_4.x86_64.rpm 9221894c0798ea16b4f043f41a1882b2bc60d4e4d0e48aab76cdc6073ec0c0a1 openswan-doc-2.6.32-21.2.el6_4.x86_64.rpm Source: 440f1acd77c7ce6154dfaef399204628434152d61ec5baa8bf92e56bc2345c28 openswan-2.6.32-21.2.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 105, Issue 10 ************************************************

1 0

vpn client setup/plugin
by Wes James 20 Nov '13

20 Nov '13

I'm trying to find the correct vpn plugin so I can vpn in to a server. The server requirements are vpn server, username/password and shared secret. I've installed a few vpn plugins, but I haven't found the correct one that has the shared secret option. Anyone know which one it is? I've tried a few from the Add/Remove Software application. Thanks, -wes

5 13

Any experience with lanner appliances?
by John Doe 20 Nov '13

20 Nov '13

Hi, anybody has installed CentOS on an lanner appliance...? Eg. http://www.lannerinc.com/products/all-purpose-box-computers/industrial-auto… I was planning to buy an hp microserver to make a "small" CentOS firewall (and more since it is overpowered), but I am wondering if I could go for a lot smaller and with no fan/noise... but at the same time a bit more expensive... Thx, JD

4 3

CentOS LiveCD on USB
by Glenn Eychaner 20 Nov '13

20 Nov '13

I have been following these instructions: https://www.centos.org/forums/viewtopic.php?t=501 to put a bunch of utilities (Clonezilla, SystemRescue, CentOS netinstall/rescue, etc.) on a single USB key. It works great for everything (including Ubuntu Live) except the CentOS 6.4 LiveCD. (You can see my postings at the bottom of the forum.) When booting the LiveCD, I got: Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-358.el6.i686 #1 After removing "quiet" and adding "selinux=disabled", I got more information; the boot stalls after finding devices, and gives: No root device "block:/dev/mapper/live-rw" found dracut suggests adding "rdshell", which I did. This was not helpful (I had no idea what to do in the dracut shell), but did notice that in the dracut shell /dev/ did NOT seem to contain my USB drive at /dev/sdb as I would expect. (One reason it seemeed not helpful) So: 1) I used VFAT rather than ext2/3/4. Do I have to use ext2/3/4? 2) Do I need to rebuild the initramfs file somewhere in the CentOS LiveCD directory? 3) Is this just a straight-up hardware incompatibility? The computer is a brand-new SuperMicro X10SAE Haswell system. Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

3 7

VNC
by Larry Martell 20 Nov '13

20 Nov '13

I had posted last week about trying to get VNC working. I was never successful nor were multiple admins. But we realized that all the hosts we tried on were VMs. We followed the same procedure ( http://wiki.centos.org/HowTos/VNC-Server) on a machine with physical HW and it worked with no problem. But on the VM I can connect, but I don't get any window displayed. Here is what is in the log: Sat Oct 19 18:39:55 2013 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 5902 vncext: created VNC server for screen 0 GNOME_KEYRING_SOCKET=/tmp/keyring-Y6Tg3c/socket SSH_AUTH_SOCK=/tmp/keyring-Y6Tg3c/socket.ssh GNOME_KEYRING_PID=19728 Failed to play sound: File or data not found ** (nm-applet:19775): WARNING **: <WARN> request_name(): Could not acquire the NetworkManagerUserSettings service. Error: (9) Connection ":1.552" is not allowed to own the service "org.freedesktop.NetworkManagerUserSettings" due to security policies in the configuration file 19/10/2013 06:39:59 PM Autoprobing TCP port in (all) network interface 19/10/2013 06:39:59 PM Listening IPv{4,6}://*:5900 19/10/2013 06:39:59 PM Autoprobing selected port 5900 19/10/2013 06:39:59 PM Advertising authentication type: 'VNC Authentication' (2) 19/10/2013 06:39:59 PM Advertising security type: 'VNC Authentication' (2) (polkit-gnome-authentication-agent-1:19796): GLib-GObject-WARNING **: cannot regster existing type `_PolkitError' (polkit-gnome-authentication-agent-1:19796): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed Initializing nautilus-gdu extension Initializing nautilus-open-terminal extension ** (gnome-panel:19761): CRITICAL **: panel_applet_frame_change_background: assertion `PANEL_IS_WIDGET (GTK_WIDGET (frame)->parent)' failed (polkit-gnome-authentication-agent-1:19796): polkit-gnome-1-WARNING **: No icon for themed icon with name 'preferences-system-network-proxy' Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2c00003 (Authentica) Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2c00003 (Authentica) Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. 19/10/2013 06:40:48 PM [IPv6] Got connection from client ::ffff:10.250.151.75 19/10/2013 06:40:48 PM other clients: 19/10/2013 06:40:49 PM Client Protocol Version 3.7 19/10/2013 06:40:49 PM Advertising security type 2 19/10/2013 06:40:49 PM Client returned security type 2 Anyone have any clues as to what could be wrong and why it works on a physical host and not on a VM?

8 20

Emacs 24 on CentOS 6.4
by Carson Chittom 19 Nov '13

19 Nov '13

I'm fairly new to CentOS, so please excuse my ignorance. I've installed CentOS 6.4, for which Emacs 23 is available; but I'd like to have Emacs 24. I've looked at rpmforge and epel, but neither seem to have Emacs 24 already packaged; and I've searched for every combination of emacs + 24 + centos without success. While I could, of course, just do the ./configure && make && make install dance, I don't like having software installed that's not in the packaging system. I'd appreciate any pointer to a prepackaged Emacs 24, or failing that, a good tutorial on how to package software correctly for CentOS.

5 7

maximum number of mounts
by Rita 19 Nov '13

19 Nov '13

What is the maximum number of NFS mounts per client? I have an instance where there are over 400 mount points using autofs. I was wondering if there is a downside to that. -- --- Get your facts first, then you can distort them as you please.--

3 3

Re: [CentOS] file managementttttttttttt
by James B. Byrne 18 Nov '13

18 Nov '13

On Sun, November 17, 2013 12:55, Michael Hennebry wrote: > > Last week, I installed CentOS 6 yet again. > I took the default desktop: gnome. > Whenever I open a directory, I get a new window. > That gets rather annoying, > especially when I have to drill down several levels. > Is there around that behaviour? > If it's in edit->preferences, I didn't find it. > Eventually I expect to change desktops. > Until then, any ideas? > . Instead of clicking on a directory in the first window (which Opens that directory in an new window) try using the Browse Folder option instead. Or open the first directory by right clicking and sekecting Browse Folder to begin with. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 3

What gui to use for syslog-ng logs?
by Rafał Radecki 18 Nov '13

18 Nov '13

Hi All. I have an environment in which I would like to implement a GUI for parsing syslog-ng logs from operating system, application servers and databases. I've heard that Splunk is a good tool but its quite hard to learn. Are there any valuable alternatives? What are you using and why? Best regards, Rafal.

5 5

(no subject)
by Andrew Holway 18 Nov '13

18 Nov '13

[root@ipa tftpboot]# semanage fcontext -l | grep tftp /tftpboot directory system_u:object_r:tftpdir_t:s0 /tftpboot/.* all files system_u:object_r:tftpdir_t:s0 /usr/sbin/atftpd regular file system_u:object_r:tftpd_exec_t:s0 /usr/sbin/in\.tftpd regular file system_u:object_r:tftpd_exec_t:s0 /var/lib/tftpboot(/.*)? all files system_u:object_r:tftpdir_rw_t:s0 /var/lib/tftpboot/etc(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/grub(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/images(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/memdisk regular file system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/menu\.c32 regular file system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/ppc(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/pxelinux\.0 regular file system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/pxelinux\.cfg(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/s390x(/.*)? all files system_u:object_r:cobbler_var_lib_t:s0 /var/lib/tftpboot/yaboot regular file system_u:object_r:cobbler_var_lib_t:s0 Could someone tell me why: /var/lib/tftpboot(/.*)? - is using (/.*)? /tftpboot/.* - is using .* Thanks, Andrew

3 2

Re: [CentOS] php 5.1 to 5.3
by Nikos Gatsis - Qbit 18 Nov '13

18 Nov '13

Helo list About a month ago I was wandering how to upgrade php 51 to 53. Finally, I follow those instructions: http://drup.org/upgrading-centos-5-php-5.3 I share my experience with you. Everything qoes fine and know 5.3.3 php ver run on my centos 5-10.el5. Thank you all for your help. Nikos On 4/10/2013 3:02 μμ, Reindl Harald wrote: > > Am 04.10.2013 13:51, schrieb Nikos Gatsis - Qbit: >> Hello list >> I'm managing a web server with centos-release-5-9.el5.centos.1. >> I have php-5.1.6-40.el5_9 right now and I'd like to update it to php53. >> I wander if its easy or complicated. If somebody have any instructions >> I'd be very glad! > * error_reporting = E_ALL | E_STRICT > * display_errors = 0 > * watch your logs for deprecated warnings, cleanup the stuff > * make sure your software works with 5.3 before you start > > * rpm -qa | grep php -> notice what is installed > * remove the php-packages with "rpm -e --nodeps" > * "yum install" the same packages with php53-subpackage > * watch your errorlogs > -- Untitled Document ------------------------------------------------------------------------ *Γατσής Νίκος - Gatsis Nikos* Web developer tel.: 2108256721 - 2108256722 fax: 2108256712 email: ngatsis(a)qbit.gr http://www.qbit.gr

3 2

CentOS 5.7 - occasional lockup
by whitivery 18 Nov '13

18 Nov '13

Using Core i7 boxes with CentOS 5.7, have experienced lockups on half of a handful of units over a couple months. They are Logic Supply Mini-ITX model KR960 with Core i7-3610QE. A couple weeks ago I enabled self-reboot on kernel panic (echo 10 > /proc/sys/kernel/panic) on all units, and had another unit lock up rather than reboot itself. I'm not sure how to pursue the problem. Doing "yum update kernel*" shows there's a newer kernel, 2.6.18-371.1.2.el5 - I'm using the stock 2.6.18-274.el5 kernel now - where's a change log of the differences so I can see if there are driver or kernel updates that might seem to apply? I don't know if setting up kdump would help since it doesn't even seem to be getting to the point where the kernel is trying to handle a panic. What else might I try?

3 4

file managementttttttttttt
by Michael Hennebry 17 Nov '13

17 Nov '13

Last week, I installed CentOS 6 yet again. I took the default desktop: gnome. Whenever I open a directory, I get a new window. That gets rather annoying, especially when I have to drill down several levels. Is there around that behaviour? If it's in edit->preferences, I didn't find it. Eventually I expect to change desktops. Until then, any ideas? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "On Monday, I'm gonna have to tell my kindergarten class, whom I teach not to run with scissors, that my fiance ran me through with a broadsword." -- Lily

2 3

Saving Workspace State
by Michael B Allen 17 Nov '13

17 Nov '13

Is there a way to save the position and workspace locations of at least terminals on logout? I want to have many workspaces with 2-3 terminals each for editing code and scripts and ssh and so on. The System > Preferences > Startup Applications > Options > Automatically remember running applications when logged out doesn't work. And gnome-session-save doesn't work either. I used to use Fedora 14 and it saved the session state fine. But now I cannot recall how to do it. I know GNOME 3 removed that code (the GNOME developers now believe that the applications should remember their own state) but I was hoping CentOS still has this capability. Is it possible to save GNOME desktop session state in CentOS 6? Mike

1 1

Re: [CentOS] file managementttttttttttt
by Johan Vermeulen 17 Nov '13

17 Nov '13

Maybe you're opening files via Locations". Try Nautilus ---- Applications - System Tools - Filemanager. Greetings, J. Amit Joshi <fan_gnr(a)yahoo.com>schreef: >Its rather simple. There is an option to choose open all new folders in a browser window. That will do the trick. > > > >-----Original Message----- >From: "Michael Hennebry" <hennebry(a)web.cs.ndsu.nodak.edu> >Sent: ‎17-‎11-‎2013 20:56 >To: "CentOS mailing list" <centos(a)centos.org> >Subject: [CentOS] file managementttttttttttt > > >Last week, I installed CentOS 6 yet again. >I took the default desktop: gnome. >Whenever I open a directory, I get a new window. >That gets rather annoying, >especially when I have to drill down several levels. >Is there around that behaviour? >If it's in edit->preferences, I didn't find it. >Eventually I expect to change desktops. >Until then, any ideas? > >-- >Michael hennebry(a)web.cs.ndsu.NoDak.edu >"On Monday, I'm gonna have to tell my kindergarten class, >whom I teach not to run with scissors, >that my fiance ran me through with a broadsword." -- Lily >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] file managementttttttttttt
by Amit Joshi 17 Nov '13

17 Nov '13

Its rather simple. There is an option to choose open all new folders in a browser window. That will do the trick. -----Original Message----- From: "Michael Hennebry" <hennebry(a)web.cs.ndsu.nodak.edu> Sent: ‎17-‎11-‎2013 20:56 To: "CentOS mailing list" <centos(a)centos.org> Subject: [CentOS] file managementttttttttttt Last week, I installed CentOS 6 yet again. I took the default desktop: gnome. Whenever I open a directory, I get a new window. That gets rather annoying, especially when I have to drill down several levels. Is there around that behaviour? If it's in edit->preferences, I didn't find it. Eventually I expect to change desktops. Until then, any ideas? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "On Monday, I'm gonna have to tell my kindergarten class, whom I teach not to run with scissors, that my fiance ran me through with a broadsword." -- Lily _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] [SOLVED] Suspend Failure on Toshiba Portege R935
by Michael B Allen 17 Nov '13

17 Nov '13

On Sun, Nov 17, 2013 at 2:12 AM, Michael B Allen <ioplex(a)gmail.com> wrote: > The problem is USB. I have an external keyboard+mouse connected by USB > and if I remove it I can successfully suspend and resume. If I plug in > a USB MIDI keyboard, again, I cannot suspend. So it seems any USB > connection breaks suspend. It seems I have fixed the problem! If I disable the following things in the BIOS, suspend / resume works: USB Legacy Emulation: disabled Bluetooth: disabled Web Camera: disabled Internal USB3.0 Controller: disabled I don't know which one was responsible. My guess would be USB 3.0. But it's 3 AM and I have to give up and declare victory. Hopefully someone finds this useful. Otherwise, sorry for the noise. Mike

2 1

Suspend Failure on Toshiba Portege R935
by Michael B Allen 17 Nov '13

17 Nov '13

On Sat, Nov 16, 2013 at 11:14 PM, EGO.II-1 <eoconnor25(a)gmail.com> wrote: > On 11/16/2013 10:04 PM, Michael B Allen wrote: >> Broke affinity for irq 27 > Found this online....don't know if it pertains to your issue, but check > it out. > > https://www.centos.org/forums/viewtopic.php?t=3941 Unfortunately updating the BIOS did not fix the problem (even though the problem is exactly as described in the post cited and the BIOS was quite a few revisions behind). Note that suspend worked fine on this machine with the previous install (Fedora 19). dmesg shows the same sequence of "now offline" and then immediately "switching to UP code": sd 0:0:0:0: [sda] Stopping disk sdhci-pci 0000:01:00.0: PCI INT A disabled ehci_hcd 0000:00:1d.0: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ehci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI i915 0000:00:02.0: power state changed by ACPI to D3 ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Broke affinity for irq 25 CPU 1 is now offline Broke affinity for irq 26 CPU 2 is now offline Broke affinity for irq 27 Broke affinity for irq 30 Broke affinity for irq 31 CPU 3 is now offline SMP alternatives: switching to UP code Are the "Broke affinity for irq" messages wrong or bad in some way? Mike -- Michael B Allen Java Active Directory Integration http://www.ioplex.com/

1 2

Re: [CentOS] CentOS as Development Laptop?
by Johan Vermeulen 17 Nov '13

17 Nov '13

My kids use Centos on the desktop, my wife uses it, at work 75 people sit in front of it every day ( and number growing ). With the appreciated help from the people on this list. Greetings, J Akemi Yagi <amyagi(a)gmail.com>schreef: >On Sat, Nov 16, 2013 at 9:23 AM, Michael B Allen <ioplex(a)gmail.com> wrote: >> >> Machine is Toshiba Portege R935. It's about a year old so it's properly "aged". > >I have summarized info on my Toshiba Portege R935-P330 here: > >http://wiki.centos.org/HowTos/Laptops/Toshiba/PortegeR935-P330 > >Akemi >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

3 2

Module signed with unknown public key
by Timothy Murphy 17 Nov '13

17 Nov '13

I recently had a hard disk failure on my CentOS-6.4 server. I re-intalled CentOS on a second disk, and this is working fine. But I put together the old system - most partitions on the old disk could still be read - and made a working system. But when I re-start this system I get the above message many times. (Also I can only login in text mode, and when I run startx I get the error "Fatal server error: no screens found." And ifconfig only gives the lo interface; it does not show eth0 and eth1, so I am unable to access the internet.) But how can one "sign" a module? I googled for this, but all the suggestions were about signing modules while compiling them. It seems odd too that the error message does not tell me which module it is referring to. But the error is repeated about as many times as the number of modules listed by lsmod, so I guess every module is wrongly signed. Any enlightenment on this subject gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

2 2

2 routes & 1 destinations
by Mihamina RKTMB 16 Nov '13

16 Nov '13

Hi, At office, we have I ISPs. I want to lightly monitor each link latency in order to decide several routing. For that, I have only one external server: 1 IP, it's an OVH dedicated server. The quick picture is http://s24.postimg.org/n3436z64l/defaul_route.png Default route is via ISP1. If OVH-server pings IP1: - the request will go through ISP1: it's OK - the reply will go through ISP1: it's OK If OVH-server pings IP2: - the request will go through ISP2: it's OK - the reply will go through ISP1: it's KO because the metric will involve ISP1 How could I tell the Office gateway (CentOS 6) "IF you reply to a ping request from the OVH server that came on IP2 THEN route it via IP2" -- +261 34 81 738 69

5 5

CentOS as Development Laptop?
by Michael B Allen 16 Nov '13

16 Nov '13

Hi, Is CentOS good for a desktop machine? I have been using Fedora but the whole GNOME 3 debacle has me scrambling for something else. I have a few "minimal" CentOS servers but does anyone here use CentOS on their laptop? Does wireless and suspend work ok? Are there packages for the usual desktop stuff like libreoffice, sylpheed and so on? Machine is Toshiba Portege R935. It's about a year old so it's properly "aged". Mike -- Michael B Allen Java Active Directory Integration http://www.ioplex.com/

4 3

CentOS 6 and Intel vPro?
by Lists 16 Nov '13

16 Nov '13

Needed to set up a cluster where horsepower and cost were paramount, so I thought this would be a good opportunity to try out Intel's business class "vPro AMT" remote administration technology, and compare it to IPMI, which I've used for years on servers. From a feature standpoint, it seems quite impressive, going to far as using standards-based VNC! Unfortunately, set up is quite a bear, with most of a day spent and while I can remote power cycle the machine via a web interface, VNC support is still not to be found. I have no intention of buying Windows licenses for all these machines just so I can enable AMT. (the VNC remote desktop solution) So far, it would seem that the Intel approach is very Windows-oriented, to the point where I've been unable to find any official documentation at all as to how to make it work with *nix. After some googling and trying to make sense of the "enterprise reference documentation" I came across http://blog.yarda.eu/2012/09/intel-amt-quickstart-guide.html which apparently was working as recently as October of this year. (see the comments) However, it would seem that intel has pulled support for some of this, as pages like http://intel.com/wbem/wscim/1/ips-schema/1/IPS_KVMRedirectionSettingData and http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_KVMRedirectionSAP simply resolve to 404, numerous attempts to google "IPS_KVMRedirectionSettingData" and such haven't (so far) returned anything useful. From what it seems, Intel wants everybody to be installing PKI AMT certificates on vPro motherboards via Windows. Does anybody have any information that might be useful about how to enable unencrypted VNC remote administration for CentOS based servers? I have a used KVM switch, but that's always been a sub-optimum solution, and it really makes a mess out of your server cages.

3 4

CentOS-announce Digest, Vol 105, Issue 9
by centos-announce-request＠centos.org 16 Nov '13

16 Nov '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CentOS Dojo in Austin, Texas on December 6th, 2013 (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 15 Nov 2013 10:19:40 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CentOS Dojo in Austin, Texas on December 6th, 2013 To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <5286499C.9060108(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" We will be having a CentOS Dojo at the Rackspace facility in Austin, Texas on Friday, December 6th, 2013. What is a CentOS Dojo: http://wiki.centos.org/Events/Dojo What is the specific information for the Dojo in Austin: http://wiki.centos.org/Events/Dojo/Austin2013 How can I register for the Austin Dojo: http://centosdojoaustin2013.eventbrite.com/ Core CentOS team members Jim Perrin and Johnny Hughes will be at the Dojo. Please come by and see us there ! =========================== We would like to thank Rackspace (http://www.rackspace.com/) and Calxeda (http://www.calxeda.com/) as our event sponsors for this event. =========================== Thanks, Johnny Hughes

1 0

OT: rpmerizor use
by m.roth＠5-cent.us 15 Nov '13

15 Nov '13

I've tried building a perl package with a ton o' crap, to install into /usr/local. Now I'd like to use rpmerizor to build an rpm that will install into /usr. Anyone know if that's possible, or am I going to have to rebuild the original package in perl, and install in /usr instead of /usr/local? mark

1 0

Re: [CentOS] Mysql databases from old system?
by Les Mikesell 15 Nov '13

15 Nov '13

On Fri, Nov 15, 2013 at 12:16 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > in other words you do not know anything about the mysql-internals > as you statet more than once, have no expierience and come up with > generic theory to defend your statements Yes, if you do things that work in general, you don't have to know all of the internals of every specific version of every specific program that you might ever touch. -- Les Mikesell lesmikesell(a)gmail.com

2 1

Re: [CentOS] Mysql databases from old system?
by Les Mikesell 15 Nov '13

15 Nov '13

On Fri, Nov 15, 2013 at 12:32 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > >> Yes, if you do things that work in general, you don't have to know all >> of the internals of every specific version of every specific program >> that you might ever touch. > > than better be quiet instead contradict and correct people with > generic wisdom which are on-topic and have the specific knowledge > and experience over many years Fine, the next time I want to move MySQL 4.0-4.5 on Apple OSX *Power PC* to MySQL 5.1/5.5 on Linux x86_64, I'll ask your advice. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Re: [CentOS] Mysql databases from old system?
by Les Mikesell 15 Nov '13

15 Nov '13

On Fri, Nov 15, 2013 at 12:00 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > and why did you strip the part where i googled for you the endianess > of MacOSX on PPC because i clearly statet mysql-data dirs used here > in production went from MySQL 3.x on Windows i686 over MySQL 4.0-4.5 > on Apple OSX *Power PC* to MySQL 5.1/5.5 on Linux x86_64? Because that has nothing to do with the generic issue of moving binary data from one CPU type to another. If you got lucky and something happened to work for you once, great. It's not something people should count on - especially for programs that provide a tool for portability and consistency. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Re: [CentOS] Mysql databases from old system?
by Les Mikesell 15 Nov '13

15 Nov '13

On Fri, Nov 15, 2013 at 10:58 AM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > >> I don't know specifically about Mysql but pretty much anything that stores binary >> representations to disk needs to be converted. > > with this logic you would need to convert MS office files > containing embedded images too.... No, image formats have standardized binary representations so they are portable. The problem is with applications that write their own binary values and data structures to disk without conversion. I don't know much about msyql internals, but I wouldn't expect it to go to the trouble of normalizing things like index files just in case you wanted to move those disks to a sparc instead of doing a dump/load. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Expanding EVMS raid1 array
by Peter Crighton 15 Nov '13

15 Nov '13

I started with two 160GB drives in RAID1 using EVMS on Centos 4.4. Both drives have now been replaced with 320GB drives but naturally are only offering 160GB (they were replaced individually at different times and self-recovered as they were RAID1. I cannot work out how to increase the size of the array to use all the available space on the disk. If I understand correctly, I should unmount the array, deactivate it and select expand. The problem is that while I can unmount and deactivate it, there is nothing to expand (selecting expand volume, expand storage object and expand container all report no items found). Also, right clicking on the array (in EVMSGUI) doesn't have expand as an option. The disks are formatted in Ext2/3. Have I missed something? I'd rather not replace the old drives, create a second RAID array and copy all the data across as I've a feeling that I'll then have to reset permissions and shares (although I just might get away with then removing the original RAID array and mounting the new one in the same location). In my mind it also ought to be easier to simply re-size the array than have to set up new ones and move the data across. -- Peter Crighton

1 0

Re: [CentOS] Mysql databases from old system?
by Les Mikesell 15 Nov '13

15 Nov '13

On Fri, Nov 15, 2013 at 10:01 AM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > abd what has the CPU type to do with the mysql datadir? Really??? You've never used processors with different bit/byte order than Intel's? I don't know specifically about Mysql but pretty much anything that stores binary representations to disk needs to be converted. > speaking with 10 years expierience and some hundret databases originally > created with MySQl 3.x on Windows, 4.x-5.0 running on MacOSX and since > MySQL 5.1 until now with 5.5 as well as MariaDB 5.5 running on Linux > without a single time payling around with dumps So no sparc's or the like in the picture? Not sure which way powerpc macs ran. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Mysql databases from old system?
by Timothy Murphy 15 Nov '13

15 Nov '13

Last week I had a hard disk failure on my CentOS server. I managed to re-install CentOS on a new disk. I have the old mysql databases from /var/lib/mysql . Can I just move them to my new disk? Any help or suggestions gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

5 4

First Time Setting up RAID
by James B. Byrne 15 Nov '13

15 Nov '13

Arch = x86_64 CentOS-6.4 We have a cold server with 32Gb RAM and 8 x 3TB SATA drives mounted in hotswap cells. The intended purpose of this system is as an ERP application and DBMS host. The ERP application will likely eventually have web access but at the moment only dedicated client applications can connect to it. I am researching how to best set this system up for use as a production host employing RAID. I have read the (minimal) documentation respecting RAID on the RedHat site and have found and read a few online guides. Naturally, in my ignorance I have a bunch of questions to ask and I probably have a bunch more that I should but do not know enough yet to ask. >From what I have read it appears that the system disk must use RAID 1 if it uses RAID at all. Is this the case? If so, is there any benefit to be had by taking two of the 8 drives (6Tb) solely to hold the OS and boot partition? Should these two drives be pulled and replaced with two smaller ones or should we bother with RAID for the boot disk at all? Given that one or two drive bays will be given over to the OS what should be the configuration of the remaining six? It appears from what I have read that RAID 5 is the only viable option. It also appears that the amount of storage available on a RAID5 array with N members is N-1/N. I also read that as the number of members increase both latency and the risk of data loss increases. As the amount of disk space we have in this unit (24Tb) is greater than the total storage of all our existing hosts it appears that a RAID5 array of 5 units would leave at least one hot spare in the chassis and two if the OS is put on one disk. Alternatively, the thought comes to mind that we could do a RAID1 with two RAID5 arrays each of which have 3 drives. Whether one would actually want to do that seems to me a bit questionable but it seems to be at least possible. Comments, suggestions, caveats? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

6 5

Re: [CentOS] First Time Setting up RAID
by James B. Byrne 14 Nov '13

14 Nov '13

On Thu, November 14, 2013 12:51, Reindl Harald wrote: > > > Am 14.11.2013 18:23, schrieb James B. Byrne: >> From what I have read it appears that the system disk must use RAID 1 if it >> uses RAID at all. > > no! > > /boot must be RAID1, see below > md0: /boot > md1: / > md2: /data > > [root@srv-rhsoft:~]$ cat /proc/mdstat > Personalities : [raid1] [raid10] > md2 : active raid10 sda3[4] sdb3[3] sdc3[5] sdd3[0] > 3875222528 blocks super 1.1 512K chunks 2 near-copies [4/4] [UUUU] > bitmap: 4/29 pages [16KB], 65536KB chunk > > md1 : active raid10 sda2[4] sdb2[3] sdc2[5] sdd2[0] > 30716928 blocks super 1.1 512K chunks 2 near-copies [4/4] [UUUU] > bitmap: 0/1 pages [0KB], 65536KB chunk > > md0 : active raid1 sda1[4] sdb1[3] sdd1[0] sdc1[5] > 511988 blocks super 1.0 [4/4] [UUUU] > So, this is saying, if I read it aright, that one can have multiple RAID arrays spread over the same spindles but each in differing partitions. Is that right? I am just getting started with this so I am trying to fit what I am reading regarding RAID with what I have dealt with in the past, mainly LVM ext3 volumes. So I am doubtless just not getting it in some important way. BTW, I intend to install CentOS-6.4 with software RAID as the eight disks are mounted in the system chassis. As far as I can tell, there is no hardware RAID controller (unless there is one on the MB, in which case SW Raid is likely a better choice anyway. Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 3

Problem with X11 application and Nouveau driver
by Glenn Eychaner 14 Nov '13

14 Nov '13

I have finally received and am configuring my new workstations eith the NVS510 graphics cards, and have run into rather a problem. The X server seems to be loading the NOUVEAU driver properly (based on the contents of Xorg.0.log), but I have one X11 application that doesn't work correctly; it runs as though XSynchronized is always True, even though it's explicitly set to False in the code. In other words, its redraw behavior is god-awful; worse because it auto-redraws once per second for little apparent reason. And some of the windows draw with artifacts if they're covered and uncovered. Any ideas, anyone? I will gladly provide more info on request, but I'm not an expert X11 programmer (worse, this application uses a third party wrapper library). This is definitely new behavior on this new computer (the previous computers, also using the Nouveau driver with GeForce 7600 cards, did not seem to have this behavior). -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

3 3

Re: [CentOS] NFS hard mount
by Denniston, Todd A CIV NAVSURFWARCENDIV Crane 14 Nov '13

14 Nov '13

> -----Original Message----- > From: Rita [mailto:rmorgan466@gmail.com] > Sent: Tuesday, November 12, 2013 7:22 PM > To: CentOS mailing list > Subject: Re: [CentOS] NFS hard mount > > Yes, unmount the share and error to the client app. > Sounds like you want to have a combination of mounting with the intr flag[1] and use autofs[2] so that the file system is not mounted ALL the time, but not so soft as to loose data all the time. I have seen soft loose data reliably, were in the same environment (and same equipment) hard,intr does not loose data. My experience is that intr is useful in situations where servers go down/have link issues frequently, and autofs with short timeouts (~15s < timeout <~60s) makes those issues even less _visible_. It will not get you an automatic unmount of the share and error to the client app in the case of server down, but it will /allow/ you to terminate the client and unmount as needed IIRC. [1] nfs mounting page with thanks to zGreenfelder https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux… [2] autofs page https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux… > > > On Tue, Nov 12, 2013 at 6:25 PM, John R Pierce <pierce(a)hogranch.com> wrote: > > > On 11/12/2013 3:18 PM, Rita wrote: > > > Is there a tunable to set NFS hard mount time out? For instance, if the > > > server becomes unavailable for extended amount of time, say 1 hour. I > > would > > > like to timeout after 30 secs. > > > > timeout and do what, unmount the share, and error to the client app > > thats trying to do a read(),write(),open(),stat(),etc ? > > > > > > > > -- > > john r pierce 37N 122W > > somewhere on the middle of the left coast > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > > -- > --- Get your facts first, then you can distort them as you please.-- Even when this disclaimer is not here: I am not a contracting officer. I do not have authority to make or modify the terms of any contract.

5 4

CentOS-announce Digest, Vol 105, Issue 8
by centos-announce-request＠centos.org 14 Nov '13

14 Nov '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1517 CentOS 6 libvirt Update (Johnny Hughes) 2. CEEA-2013:1516 CentOS 6 hpsa Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 13 Nov 2013 14:40:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1517 CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20131113144051.GA13713(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1517 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1517.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 69eefbd0356841d9bfcbdd55dcf27abf7d2782d9fb739276631b1f78e3524c72 libvirt-0.10.2-18.el6_4.15.i686.rpm b8b6e63923708bb36b276bc0d06e33e8c97f06f0f2d6e444acb50dc3d301aade libvirt-client-0.10.2-18.el6_4.15.i686.rpm 55f16975dc8fe7fdcd1325e2c9784c31b9a4ed48bf56a9712a55f1946e307c56 libvirt-devel-0.10.2-18.el6_4.15.i686.rpm fa2a8e1f173350d464b7ecb572428615158f3c625bd1a489d364cfc9415fe094 libvirt-python-0.10.2-18.el6_4.15.i686.rpm x86_64: a8f7dac16c432b0491217073939472434d0e9a23066b9dd7fc4eee5b7d61aac5 libvirt-0.10.2-18.el6_4.15.x86_64.rpm b8b6e63923708bb36b276bc0d06e33e8c97f06f0f2d6e444acb50dc3d301aade libvirt-client-0.10.2-18.el6_4.15.i686.rpm 2bfd49eb900fe8eeffebe4979ade482a81cf0b7a5f014fce43c539fc2ee2ff2d libvirt-client-0.10.2-18.el6_4.15.x86_64.rpm 55f16975dc8fe7fdcd1325e2c9784c31b9a4ed48bf56a9712a55f1946e307c56 libvirt-devel-0.10.2-18.el6_4.15.i686.rpm 49f4c7bf99ff33b0d40483cff2da7398f8ca829bd9ca87e84e6932fd76b56429 libvirt-devel-0.10.2-18.el6_4.15.x86_64.rpm ddda9892618a0d0d785c42216e40bb0ea59d6e3f49b4b681818b7d1436936f2b libvirt-lock-sanlock-0.10.2-18.el6_4.15.x86_64.rpm 4568330fe6f07ba850b5f7cefd2592af0914b00c3e1dab6e9ae004dadcf60ce9 libvirt-python-0.10.2-18.el6_4.15.x86_64.rpm Source: 21c0cf5a30850bb5c759a56ca617a7c8cbebdebfaadc08adc2281a09ba684cf2 libvirt-0.10.2-18.el6_4.15.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 13 Nov 2013 14:41:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1516 CentOS 6 hpsa Update To: centos-announce(a)centos.org Message-ID: <20131113144106.GA13790(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1516 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1516.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ab3c7899340f74c9ab48c0a5738a11b0174382840b62ff0cb09d89a1e0e127c5 kmod-hpsa-3.4.0_1_RH1-1.el6_4.i686.rpm x86_64: ff8ea688947819a10985a76dbec58a550824154780ed1d696a9da2e68772b19b kmod-hpsa-3.4.0_1_RH1-1.el6_4.x86_64.rpm Source: e2ccc0c0f0a2af623615a19238083537e3ccdd45c84aecd205ba10fe4e372388 hpsa-3.4.0_1_RH1-1.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 105, Issue 8 ***********************************************

1 0

Tuning MySQL - what's the best place for mysqld parameters?
by Alexander Farber 13 Nov '13

13 Nov '13

Hello CentOS users, for a Wordpress website I have installed mysql-server-5.1.69-1.el6_4.x86_64 and run /usr/bin/mysql_secure_installation on a CentOS 6.4 machine with mucho RAM (32 GB) and I wonder, what would be the best place for the mysqld parameters descibed at http://dev.mysql.com/doc/refman/5.1/en/server-parameters.html mysqld_safe --key_buffer_size=64M --table_open_cache=256 \ --sort_buffer_size=4M --read_buffer_size=1M & Should I just edit the file /etc/init.d/mysqld or is there a better place in CentOS for that (under sysconfig?) Thanks Alex

3 2

strange speed of mkfs Centos vs. Debian
by Götz Reinicke - IT Koordinator 13 Nov '13

13 Nov '13

Hi, I'm testing a storage system and different network settings and I'm faced with a strange phenomen. Doing a mkfs.ext4 on the centos server lasts 11 minutes. The same mkfs.ext4 command on the debian installation is done in 20 seconds. It is formatting a 14 TB 10Gbit ISCSI Target. It is the same server. Centos and debian are installed on different internal harddisks. Any explanations why debian is so f*** fast? Any hint? Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 Fax +49 7141 969 55 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

2 1

Using CentOS Wordpress rpms
by Max Pyziur 13 Nov '13

13 Nov '13

Greetings, Apologies for my seeming daft naivete. I'm wondering if there any sort of conventions for using Wordpress on CentOS? Generally until now, I have had users install Wordpress from tarballs on a case-by-case basis. This means that you can have several different versions of WordPress operating on a site. With the RPM you have a version that can be consistent across multiple websites on one server. Is this done through the use of symlinks, or is there some other, additional magic that gets put to use. I've done a little searching of the Google genie, but I'm only led to webpages outlining installing Wordpress from tarballs. Much thanks, Max Pyziur pyz(a)brama.com

7 11

NFS hard mount
by Rita 13 Nov '13

13 Nov '13

Is there a tunable to set NFS hard mount time out? For instance, if the server becomes unavailable for extended amount of time, say 1 hour. I would like to timeout after 30 secs. (Soft mount isn't an option, BTW) -- --- Get your facts first, then you can distort them as you please.--

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss