- Discuss - lists.centos.org

openvpn + routing
by Axel Glienke 08 Dec '15

08 Dec '15

Hello, i have a little question. My system: ip route: 0.0.0.0/1 via 10.8.0.5 dev tun0 default via 192.168.2.1 dev br0 proto static metric 425 10.8.0.1 via 10.8.0.5 dev tun0 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 88.198.140.127 via 192.168.2.1 dev br0 192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.101 metric 425 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 traceroute gmx.de traceroute to gmx.de (213.165.65.60), 30 hops max, 60 byte packets 1 Speedport.ip (192.168.2.1) 0.578 ms 0.662 ms 0.859 ms ^C [root@h1 ~]# traceroute spiegel.de traceroute to spiegel.de (62.138.116.3), 30 hops max, 60 byte packets 1 10.8.0.1 (10.8.0.1) 35.009 ms 34.982 ms 34.956 ms Why the routing is different, in first case over br0 in second over the vpn device? How can i disable "push default route" from the server-directive on client-side in OpenVPN? I want, that only traffic, incoming over tun0 routing back over tun0. Is this possible with firewalld-cmd? Thx. Grüße Axel

5 5

yum errors
by Wes James 08 Dec '15

08 Dec '15

I have inherited centos 6.3 and 6.2 vms in an esxi environment. When I do yum provides ntpd on the 6.3 box I get a lot of errors like: Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.unl.edu * extras: mirrors.cmich.edu * updates: mirror.steadfast.net http://mirror.unl.edu/centos/6.4/os/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404" Trying other mirror. http://mirror.ash.fastserv.com/pub/linux/centos/6.4/os/x86_64/repodata/repo…: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404" Trying other mirror. http://mirrors.einstein.yu.edu/centos/6.4/updates/x86_64/repodata/repomd.xml: [Errno 12] Timeout on http://mirrors.einstein.yu.edu/centos/6.4/updates/x86_64/repodata/repomd.xml: (28, 'connect() timed out!') Trying other mirror. http://mirrors.versaweb.com/centos/6.4/updates/x86_64/repodata/repomd.xml: [Errno 12] Timeout on http://mirrors.versaweb.com/centos/6.4/updates/x86_64/repodata/repomd.xml: (28, 'connect() timed out!') Trying other mirror. Why am I getting these errors? I installed 6.4 in virtualbox and the .repo files seem the same, except the 6.3 box didn’t have a fastback.repo file. Also why is it looking at 6.4 repos above? When I see: cat /etc/redhat-release CentOS release 6.3 (Final) i.e., this box is 6.3. Shouldn’t it be looking for 6.3 repo info? Thanks, -wes

8 24

Version numbering vis a vis CentOS and RHEL
by Phelps, Matthew 08 Dec '15

08 Dec '15

OK, I'm staring a new thread. On Mon, Dec 7, 2015 at 9:53 AM, Timothy Murphy <gayleard(a)eircom.net> wrote: > Phelps, Matthew wrote: > > >> > Oh, wait: CentOS, love it or leave it. > >> > >> Correct. > >> > >> In fact, I would prefer you leave. > > > > Really? > > > > This is what we're dealing with now? > > > > OK. I will recommend we move away from CentOS. > > This seems to be raising what to me is a trivial issue > to an absurd level of hostility. > Johnny Hughes' comment was uncharacteristically harsh; > and yours is even harsher. > > To me, CentOS is a highly stable OS for my home servers, > and I am eternally grateful to Johnny Hughes and his colleagues > for carrying out what looks to me like an impossibly complex task. > > The numbering of packages is a very small part of this. > On the other hand, a kernel panic would be very worrying to me > if it were in fact likely to happen. > I am glad to hear that I have no need to worry. > To you, and probably a majority of CentOS users, the "version number" of CentOS is indeed a trivial, cosmetic issue. However, there are those of us who use CentOS in a very large enterprise environment. That is, in fact, the intended audience of the whole distro. When there is a "new version" of Red Hat (and I know that means nothing with hundreds of constantly updating packages; however, my bosses don't get that), and hence CentOS, there is a huge amount of work that needs to be done in a typical enterprise. These include, but are not limited to: - setting up a new internal-only mirror of the distribution - setting up a new tftp/PXEboot/kickstart environment for network installs. - Editing several install scripts to match the new environment - Testing all these changes - Checking that all security recommendations/edicts from a higher authority (e.g. the US Government), which are also based on the "version", are followed - Checking that all commercial software supports the release (most of these use "RHEL X.y", what is that in CentOS now?) - Trying to get support from commercial software when the "version numbers" don't match - Coordination of other repositories (e.g. EPEL) is based on the "version", how does that work now? All of these things ran in parallel with the RHEL release cycle, and the work could be done at the same time. That was the overriding philosophy of CentOS, "we are a recompile of RHEL." Now, the impression is (rightly or wrongly, it doesn't matter to me) CentOS is totally becoming a separate Linux distro, and needs to be treated as such. And that has huge implications for system administrators in a large environment. Huge. There are answers to all these questions, but there is a lot of confusion that's been generated by this seemingly cosmetic change in version numbers. I've checked, and there was no,"We're considering creating this basic difference from RHEL, how will this affect you?" on this list, or the website, etc. From our viewpoint, it was sprung on us out of nowhere, and now were being told "deal with it, or leave." It sucks. -- Matt Phelps System Administrator, Computation Facility Harvard - Smithsonian Center for Astrophysics mphelps(a)cfa.harvard.edu, http://www.cfa.harvard.edu

10 15

CentOS-announce Digest, Vol 130, Issue 2
by centos-announce-request＠centos.org 08 Dec '15

08 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2549 Moderate CentOS 6 libxml2 Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Dec 2015 13:26:33 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2549 Moderate CentOS 6 libxml2 Security Update Message-ID: <20151207132633.GA36846(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2549 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2549.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ef6fc5b110883e8b85e6e0aadb0dece190506569ba1c25247b612ffee5e10e7c libxml2-2.7.6-20.el6_7.1.i686.rpm 02e4ba1fea746762064a0fc7ba37d9fa1626cefd43257360db633fb23007c1d7 libxml2-devel-2.7.6-20.el6_7.1.i686.rpm d45068dcb62936bfd95e45182c807339dc060963d97adeae4d7717943a0107df libxml2-python-2.7.6-20.el6_7.1.i686.rpm 3c14ee97b4f56ede803f59fcdadb4786e3e4ab6792d68e7b509e7a346973b363 libxml2-static-2.7.6-20.el6_7.1.i686.rpm x86_64: ef6fc5b110883e8b85e6e0aadb0dece190506569ba1c25247b612ffee5e10e7c libxml2-2.7.6-20.el6_7.1.i686.rpm 6c42e07b5804dc8c346d5fa29755a515e8338618fc2b228959e4449e0d7b3227 libxml2-2.7.6-20.el6_7.1.x86_64.rpm 02e4ba1fea746762064a0fc7ba37d9fa1626cefd43257360db633fb23007c1d7 libxml2-devel-2.7.6-20.el6_7.1.i686.rpm 46fa4d9f942837bb4dc48907578ed4e12ca6a830b61719c649ff2b7ac5292bbf libxml2-devel-2.7.6-20.el6_7.1.x86_64.rpm 248032ec39a9aa0964763fa824604bc696dc54b59adaaac6b9e7c54f76137518 libxml2-python-2.7.6-20.el6_7.1.x86_64.rpm 67315973b872c5fdfc8656df43af9d21bd9a881e4c20d1bff3f53db1def4022b libxml2-static-2.7.6-20.el6_7.1.x86_64.rpm Source: 647b02b23b0fc8a0cb8d0821279cb4600f130b3776e345e91dee342f8dfbbbb4 libxml2-2.7.6-20.el6_7.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 2 ***********************************************

1 0

7.2 kernel panic on boot
by Duncan Brown 07 Dec '15

07 Dec '15

Hi All After upgrading to 7.2, I'm getting an immediate kernel panic on boot Dropping back to 3.10.0-229.20.1.el7.x86_64 and the system boots fine How can I go about diagnosing the problem here? thanks Duncan

23 91

A bareos question
by m.roth＠5-cent.us 07 Dec '15

07 Dec '15

I've upgraded to 15.2, which has a webui. However, I'd like to tell it to use kerboros, not a hard-coded password in a configuration file. Any clues? mark

1 0

Using typescript as a default shell?
by Benjamin Smith 07 Dec '15

07 Dec '15

Is it possible to use 'script' command that records what happens in a session as the default shell? How could you deal with multiple logins at once? What about output from rsync and the like?

4 4

Centos 7 Yum conflict libicalss
by david 07 Dec '15

07 Dec '15

Folks My Centos 7 systems are all failing to update because of Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libicalss.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libicalss.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libicalss.so.1()(64bit) Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libicalvcal.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libicalvcal.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libicalvcal.so.1()(64bit) Error: Package: orage-4.10.0-4.el7.x86_64 (@epel) Requires: libical.so.0()(64bit) Removing: libical-0.48-6.el7.x86_64 (@base) libical.so.0()(64bit) Updated By: libical-1.0.1-1.el7.x86_64 (cr) ~libical.so.1()(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Is there something I should (not) be doing? The command was: yum update David

5 5

About CentOS Marks
by Takuya Yamamoto 07 Dec '15

07 Dec '15

Hello https://www.centos.org/legal/trademarks/ According to above, I found following message. ---------------------- Notwithstanding anything to the contrary provided in these Guidelines, the following are examples of unacceptable uses: 1.Use of the CentOS Marks in connection with commercial redistribution of CentOS software ---------------------- I have a question. What means "Use of the CentOS Marks"? For example, While CentOS is booting up, CentOS show the CentOS logo on Full screen. Is it unacceptable? Or acceptable? If commercial redistribution of CentOS software, Developer have to hide this logo? For example, CentOS System is working, user can show the "CentOS" text words on console. Is it unacceptable? Or acceptable? br ----------------------- Yamamoto Takuya

2 1

Centos-7: odd yum output
by Fred Smith 07 Dec '15

07 Dec '15

Hi all! On 7.1 + CR updates, running "yum list installed | grep -y totem" gives this: yum list installed | grep -y totem totem.x86_64 1:3.14.3-5.el7 @cr totem-nautilus.x86_64 1:3.14.3-5.el7 @cr totem-pl-parser.x86_64 3.10.5-1.el7 @cr and "yum list installed | grep -y totem" gives this: yum list available | grep -y totem gnome-python2-totem.x86_64 2.32.0-20.el7.nux nux-dextop totem-devel.x86_64 1:3.14.3-5.el7 cr totem-mozplugin.x86_64 1:3.8.2-5.el7 base totem-mozplugin-vegas.x86_64 1:3.8.2-5.el7 base totem-pl-parser.i686 3.10.5-1.el7 cr totem-pl-parser-devel.i686 3.10.5-1.el7 cr totem-pl-parser-devel.x86_64 3.10.5-1.el7 cr so then, why is it that "yum install totem-mozplugin" gives this? yum install totem-mozplugin Loaded plugins: fastestmirror, langpacks, nvidia Loading mirror speeds from cached hostfile * base: mirrors.lga7.us.voxel.net * elrepo: iad.mirror.rackspace.com * epel: mirrors.mit.edu * extras: mirror.ash.fastserv.com * nux-dextop: mirror.li.nux.ro * updates: centos.chi.host-engine.com Package 1:totem-mozplugin-3.8.2-5.el7.x86_64 is obsoleted by 1:totem-3.14.3-5.el7.x86_64 which is already installed Nothing to do I don't understand, UNLESS it's saying that the totem package now includes the plugin? OK, I can understand that. But looking at the contents of the RPM, it seems to contain only plugins for itself. I'm just upgrading to 7.x, now, and the 6.x box previously had several plugins installed that I can't find, nor even remember where I found 'em. (probably has to do with my age... :[ ) Advice will be appreciated. thanks in advance! Fred -- ------------------------------------------------------------------------------ Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

2 1

lunar notation in crontab
by ken 06 Dec '15

06 Dec '15

Crontab offers many refined facilities for Western calendaring, but none for traditional Eastern-- lunar-- designations. So for example, if one wants specify regular occurring events on full moons or on new moons, there is no way to do this. Emacs (a text processor!?) accomplishes this. The math for calculating lunar calendaring is already available; mathematical functions are already available for simple downloading and so would need simply integration into crond. User settings in crontab would make most sense designated in the 'day of month' field with keyword either 'full' or 'new' (abbreviated with 'f' or 'n') prepended to a signed integer number of days (N * 24 hours). I.e., "new+5" would specify '5 days after the new moon'; "full-1" would specify "24 hours prior to the full moon"; "new+0", "new-0" and "new" would all mean the same: "the moment of the new moon". I suppose that alternate syntaxes could be more refined, including hours and minutes before/after new/full, so possibly useful, but then also more complex. Alternate and more refined time periods would be a question for developers.

3 2

Firewalld zone conflict
by Colin Coles 04 Dec '15

04 Dec '15

Hi, In CentOS7 I have added two zones using firewall-cmd, each for different ports/services and interfaces when I try to --add-source to the second zone with an IP that is already in the first I am getting an 'Error: ZONE_CONFLICT' message. Am I trying to do something illogical or is this a feature? Cheers, Colin.

2 2

CentOS 7.2 - no GUI login after upgrade
by Earl A Ramirez 04 Dec '15

04 Dec '15

After installing and enabling the centos-release-cr repo on my CentOS 7.1 laptop; I ran yum clean all and yum update. Yum complained about gstreamer1 dependencies that is caused by epel repo; therefore, I excluded it from the epel repo and run yum update one more time and it went through. After the update was completed I rebooted the laptop and I will just get the splash screen but will never get to the actual login screen; I have experienced this in the past from CentOS 7.0 to 7.1 upgrade and at that time it was caused by SELinux relabeling some of the configuration files; e.g. /etc/passwd and /etc/shadow. This was discovered after I went into single user mode and checked the journal. I booted in the previous successful kernel that loaded and I experienced the same behavior; therefore I went into single user mode from the latest kernel that came with CentOS 7.2 and the previous kernel, checked the journal and there were no errors that give me a hint of what is going wrong. There are no SELinux relabeling but I left the laptop on for a few hours because I was modifying a few directories to accommodate docker and KVM storage from the default setup. Any pointers on how to get the login screen? Thanks in advance. -- Kind Regards Earl Ramirez

4 3

diagnosing noise
by Michael Hennebry 03 Dec '15

03 Dec '15

Though quiet at the moment, my desktop sometimes sometimes makes a noise that I attribute to either a disk or a fan on its last legs. I'm looking for suggestions for distinguishing. For the disk, I expect I should use either hdparm of fsck. Even after reading the man page, I'm not sure how I would use hdparm. If I use fsck, what should I take as evidence of a bad drive? A good drive? Is there a way to tell whether the OS thinks a fan is on? Is there a way to turn a fan on or off manually? Time for a backup. -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

4 3

Re: [CentOS] 7.2 kernel panic on boot
by m.roth＠5-cent.us 03 Dec '15

03 Dec '15

Duncan Brown wrote: > On 03/12/2015 17:00, m.roth(a)5-cent.us wrote: >> Duncan Brown wrote: >>> On 03/12/2015 14:29, Leon Fauster wrote: >>>> Am 03.12.2015 um 15:06 schrieb Duncan Brown <centos2(a)duncb.co.uk>: >>>>> On 03/12/2015 13:54, Jonathan Billings wrote: >>>>>> On Thu, Dec 03, 2015 at 01:44:47PM +0000, Duncan Brown wrote: >>>>>>> The last message before it is "switching to clocksource hpet" >>>>>>> >>>>>>> Then the panic scrolls by >>>>>>> >>>>>>> I've no idea if that counts as later or not >>>>>> It's unlikely to be a panic related to your hardware clock (HPET = High Precision Event Timer), so it's probably when the kernel is touching something else on your system. >>>>>> >>>>>> The content of the panic is really the only thing that can help. >>>>>> >>>>> That's what I figured, but how do I go about getting a copy of it? >>>>> >>>>> Most of it has scrolled by when it's finished >>>> start for example with a photo (or video and grab the frame where the panic occurs) and - disable grub options like rhgb or quit ... >>> Here is a couple of pictures, >> ^^ should be are.* >>> http://i.imgur.com/Vqvqn1H.jpg >>> http://i.imgur.com/WQaz1j9.png >>> >>> Any use? >> I'm just guessing here, but it looks to me as though it's looking at inodes - so filesystem, and kernel modules, maybe video - notice the blacklist. >> >> Wonder if this is a grub2 issue, and it's not finding the filesystem. This isn't, by chance, a secure boot, not BIOS, system? >> > No nothing that exciting, BIOS, and xfs on lvm2. Pretty much the standard options anaconda gives you > > And it boots fine in 3.10.0-229.20.1.el7.x86_64 A thought: did you say you'd rebuilt the ramfs, making sure both xfs and lvm drivers were included? mark

3 2

CR getting 7.2 packages......
by Lamar Owen 03 Dec '15

03 Dec '15

Heads-up to everyone: CR is getting CentOS 7.1511 (aka '7.2') packages..... just updated using CR, and, yeah, GNOME 3.14 is a bit different from 3.8...... several things are in different places on the screen. I did have to re-setup my triple monitor settings to have the laptop's display in the center and the two other displays as one on the left and one on the right. The good side is that nothing major seems to have broken. Update for me was 1,260+ packages totaling about 1.3GB and taking a grand total of about 25 minutes, start to finish (prior to the reboot). Hardware is a Dell Precision M6500 Core i7 740QM with 20GB of RAM, all but /home on a 256GB SSD with /home on an HGST 1TB HDD. Kudos to the build team for the quick turnaround, and for the CR repo.

5 5

Fwd: Re: New Monitor Weirdnesses or how do I get Xorg to pay attention to my xorg.conf file?
by Robert Heller 03 Dec '15

03 Dec '15

Has anyone built the nouveau drivers for CentOS 5 system running under Xen? Forwarded Message: From: =?iso-8859-1?Q?Thomas_L=FCbking?= <thomas.luebking(a)gmail.com> To: <xorg(a)lists.x.org> Subject: Re: New Monitor Weirdnesses or how do I get Xorg to pay attention to =?iso-8859-1?Q?my_xorg.conf_file=3F?= Date: Thu, 03 Dec 2015 16:19:54 +0100 Message-ID: <f2d6eb09-0843-402f-bd3c-356af88de513(a)gmail.com> VESA defined modes are - 320×200 - 640×400 - 640×480 - 800×600 - 1024×768 - 1280×1024 No idea whether the vesa driver supports non-vesa modes, but did you try using nouveau instead of vesa? /var/log/Xorg.0.log will tell you the servers opinion on what you added to your config. Cheers, Thomas _______________________________________________ xorg(a)lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

1 0

CentOS-announce Digest, Vol 130, Issue 1
by centos-announce-request＠centos.org 03 Dec '15

03 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2521 Important CentOS 6 jakarta-commons-collections Security Update (Johnny Hughes) 2. CESA-2015:2504 Moderate CentOS 6 libreport Security Update (Johnny Hughes) 3. CEBA-2015:2510 CentOS 6 environment-modules FASTTRACK BugFix Update (Johnny Hughes) 4. CEBA-2015:2511 CentOS 6 passwd FASTTRACK BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Dec 2015 13:38:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2521 Important CentOS 6 jakarta-commons-collections Security Update Message-ID: <20151202133814.GA31544(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2521 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2521.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fb0d4030ce62da3195e8dbc0499c8a9dac2cf305d7360e7c26d4463460d8e9c8 jakarta-commons-collections-3.2.1-3.5.el6_7.noarch.rpm 6fb79e53a628993b4edfc8dd4aa798734d16bd5023b73a1920bc397eee8c930b jakarta-commons-collections-javadoc-3.2.1-3.5.el6_7.noarch.rpm 28379893b6c23425192454d698306f23912fac837526cb87bf5a7ebab0979c50 jakarta-commons-collections-testframework-3.2.1-3.5.el6_7.noarch.rpm 214411faa4b24c1f8ed7455d75bcf55261612a367f75670ef80df5dbbbbe2d2e jakarta-commons-collections-testframework-javadoc-3.2.1-3.5.el6_7.noarch.rpm c2341b79e8cfcb1332164d438812708e94889dae669c01f9e59bebae1294226d jakarta-commons-collections-tomcat5-3.2.1-3.5.el6_7.noarch.rpm x86_64: fb0d4030ce62da3195e8dbc0499c8a9dac2cf305d7360e7c26d4463460d8e9c8 jakarta-commons-collections-3.2.1-3.5.el6_7.noarch.rpm 6fb79e53a628993b4edfc8dd4aa798734d16bd5023b73a1920bc397eee8c930b jakarta-commons-collections-javadoc-3.2.1-3.5.el6_7.noarch.rpm 28379893b6c23425192454d698306f23912fac837526cb87bf5a7ebab0979c50 jakarta-commons-collections-testframework-3.2.1-3.5.el6_7.noarch.rpm 214411faa4b24c1f8ed7455d75bcf55261612a367f75670ef80df5dbbbbe2d2e jakarta-commons-collections-testframework-javadoc-3.2.1-3.5.el6_7.noarch.rpm c2341b79e8cfcb1332164d438812708e94889dae669c01f9e59bebae1294226d jakarta-commons-collections-tomcat5-3.2.1-3.5.el6_7.noarch.rpm Source: 8637ea23285015541b3c8f12e9012905f3406854f5578baf2fd130439b166560 jakarta-commons-collections-3.2.1-3.5.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 2 Dec 2015 13:52:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2504 Moderate CentOS 6 libreport Security Update Message-ID: <20151202135230.GA32397(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2504 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2504.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 656487d74686645d976f44633dee7cbadc1fae5a6c2dd01ecfe5e393a860c4ad libreport-2.0.9-25.el6.centos.i686.rpm 8547d958f7ffefdd76cb36e193b68b523cc119a322de72dc4d010ceed0ce0b9c libreport-cli-2.0.9-25.el6.centos.i686.rpm 6105f4d8a44bdf1bf021f44312caf54f4bf2cec22c0e5b99ca9586385a979608 libreport-compat-2.0.9-25.el6.centos.i686.rpm 921ae3d09b58a3f86bfa95bbb79da12c6b36089e13c961cd32a48c908a08720b libreport-devel-2.0.9-25.el6.centos.i686.rpm 0950a92cf352527f06f86c3da9f5f6ccfc43d99ec51ef8f1e78753db789e4d16 libreport-filesystem-2.0.9-25.el6.centos.i686.rpm 2c8f5e795796c1d4761417fa6afb6c246ebedbbde15bec567ab995453caaa330 libreport-gtk-2.0.9-25.el6.centos.i686.rpm 86570e8bbe44018a737dc623caea66842d657254f6eab5440b5b230a5de671e1 libreport-gtk-devel-2.0.9-25.el6.centos.i686.rpm 01f554534b11515d8c8f407d5343f45cb4139a6ce94a1e5e7a9b8b040d8e5743 libreport-newt-2.0.9-25.el6.centos.i686.rpm 67252ae80031f32ff9e090e1f6d75eaf931cbd793ae0f8cc51d6820310476ecb libreport-plugin-bugzilla-2.0.9-25.el6.centos.i686.rpm e5bc4aad50856e70dd73c1ba10c21637248d6c231bc163190d5ca04245fb329e libreport-plugin-kerneloops-2.0.9-25.el6.centos.i686.rpm 7d0cffdd42a9cdb9251c7db43f6e819959d74d010e55b5cee22fef26df1c9302 libreport-plugin-logger-2.0.9-25.el6.centos.i686.rpm 2c0e805d6bd801b396ab87dde8d49fe0d19617a75377f0fac708209fb40cf0da libreport-plugin-mailx-2.0.9-25.el6.centos.i686.rpm 558c107bccfa46cdd9f2311074b9152493326d16a4401744751dc6782ff4180c libreport-plugin-reportuploader-2.0.9-25.el6.centos.i686.rpm 37b0bf0cbe56180b29a34c0e93fca3fea01dd9feace36eeb2bd77b8e168a2fb3 libreport-plugin-rhtsupport-2.0.9-25.el6.centos.i686.rpm 1bd8f673862301554dd01d48eb0396bb8e7d335bd7f9323d53a06ad11e139505 libreport-plugin-ureport-2.0.9-25.el6.centos.i686.rpm d0c56a772a92aa5e4602bc25a5f24387642e3fb0b97135062321cd165c4aeff6 libreport-python-2.0.9-25.el6.centos.i686.rpm x86_64: 656487d74686645d976f44633dee7cbadc1fae5a6c2dd01ecfe5e393a860c4ad libreport-2.0.9-25.el6.centos.i686.rpm 429819991b94f856dafed9405c3f58ea040b99566e8027578c3683cdacacaecb libreport-2.0.9-25.el6.centos.x86_64.rpm aa5e4a12076a7986ffb1e9ef5bf35c7bc469aba3c1032ac15effdb2f52f35564 libreport-cli-2.0.9-25.el6.centos.x86_64.rpm 244bc4f64c683f2387a74924f1f3f4edf34d923fcb03cb15578ba4be3b6147f1 libreport-compat-2.0.9-25.el6.centos.x86_64.rpm 921ae3d09b58a3f86bfa95bbb79da12c6b36089e13c961cd32a48c908a08720b libreport-devel-2.0.9-25.el6.centos.i686.rpm 996d750ee1aa597a69ac4b4fef1f5837ce7524c33129a4b37895fc8c0d8e86b6 libreport-devel-2.0.9-25.el6.centos.x86_64.rpm 0c32a03b087e95294406e38cf9f8aafb4deed6c9bc6ab8c5bf254350215e548a libreport-filesystem-2.0.9-25.el6.centos.x86_64.rpm 2c8f5e795796c1d4761417fa6afb6c246ebedbbde15bec567ab995453caaa330 libreport-gtk-2.0.9-25.el6.centos.i686.rpm daab600f0aa8c53e873b1b4078de62014ca0e2ee859cdb6b36c83caa9f9caea6 libreport-gtk-2.0.9-25.el6.centos.x86_64.rpm 86570e8bbe44018a737dc623caea66842d657254f6eab5440b5b230a5de671e1 libreport-gtk-devel-2.0.9-25.el6.centos.i686.rpm c218a6f402e882c30925449b6eb815f510b911d7f8473bb3be9cfd5e1fb90951 libreport-gtk-devel-2.0.9-25.el6.centos.x86_64.rpm 438430f2d9dcfa2673ba58e971f05f701eeec79a5528f68f63e186b126dfd93b libreport-newt-2.0.9-25.el6.centos.x86_64.rpm 6140c9131b01584323bae639f0e8d9ec112ceae68af65913d6763e58b495feaa libreport-plugin-bugzilla-2.0.9-25.el6.centos.x86_64.rpm 2d0644a2aa90a2fcad0fa1a6b71299f87da68bffc56085cfb27e9927338cb5b6 libreport-plugin-kerneloops-2.0.9-25.el6.centos.x86_64.rpm 1558a6e36b162b06d872095cd240e7fe79541d15e7d8aaa047c7b25c840e9b88 libreport-plugin-logger-2.0.9-25.el6.centos.x86_64.rpm 2f36f2d6fd5472b2dba219f59edb4ac3ee5fc98bc4a613a16dccd73038c95368 libreport-plugin-mailx-2.0.9-25.el6.centos.x86_64.rpm 7f67ed428139f6adaf8a96245e607f1c248c4d5f6464c8f85070fbe5b71738db libreport-plugin-reportuploader-2.0.9-25.el6.centos.x86_64.rpm 57f03c50a3ef0b23192cc59abdb4fe0799f8b6f8b803d8b717559b1f06e72034 libreport-plugin-rhtsupport-2.0.9-25.el6.centos.x86_64.rpm cdcd49774383cf21879c76f9bc24b7badc8672d5210eb66a31a0841287ccb590 libreport-plugin-ureport-2.0.9-25.el6.centos.x86_64.rpm 5a4c71eb3b48e08600e5f88a9a6e5604de7f13e59ed78da20ba61eeb3cea7cca libreport-python-2.0.9-25.el6.centos.x86_64.rpm Source: 361ba7c3774e45099a6d23aa720ea5ea3a985e03b3e0766ed0fb40276cb68975 libreport-2.0.9-25.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 2 Dec 2015 14:03:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2510 CentOS 6 environment-modules FASTTRACK BugFix Update Message-ID: <20151202140322.GA42985(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2510 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2510.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bd06ac4a595aeb563b264c6b931745a7c4ed3b7c028c1b7a3f357c0f79d420ff environment-modules-3.2.10-3.el6.i686.rpm x86_64: 53c283fb6642081efe50b5672127c264d1eee696dadf4b413320eb021d4cf694 environment-modules-3.2.10-3.el6.x86_64.rpm Source: 840c8ffdcbddbd5f24f8b815973fbe7b0f17f1d07c56a688224e165ece8304d3 environment-modules-3.2.10-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 2 Dec 2015 14:03:38 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2511 CentOS 6 passwd FASTTRACK BugFix Update Message-ID: <20151202140338.GA43073(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2511 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2511.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6e739781cb42d40a379b7bac1d944f738c6dd1069b17752adb90338be81523b5 passwd-0.77-7.el6.i686.rpm x86_64: 98b6d3dd751b7c633f431bcedc85bdaa70c6a3fded5523bc509146a89b15e9d1 passwd-0.77-7.el6.x86_64.rpm Source: b1c817af58eabdd41efa66c7cd98ae9f14eaa367a5f9929a419cfe6bdab1e11c passwd-0.77-7.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 1 ***********************************************

1 0

lvm snapshot
by Axel Glienke 03 Dec '15

03 Dec '15

Hello after a lvm snapshot creation and a reboot are all logical volumes are missing, only swap is present. lvcreate -L 5000M -s -n centos_h1-root_snap /dev/mapper/centos_h1-root lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert centos_h1-root_snap centos_h1 swi-a-s--- 4,88g root 0,00 home centos_h1 -wi-ao---- 15,00g root centos_h1 owi-aos--- 20,00g swap centos_h1 -wi-ao---- 7,62g var centos_h1 -wi-ao---- 1000,00g after reboot no complete start, dracut console is running: dracut:# ls /dev/centos_h1/ swap dmsetup info shows swap only, too I can reproduce this on 2 different Servers and a Virtual Machine have same behavior. What do i wrong? Greetings Axel

4 13

CentOS and bacula
by Alessandro Baggi 02 Dec '15

02 Dec '15

Hi list, I've a bacula system based on disk volume that I need to refresh (new install). There is a way to mantain the "current status" (volumes, catalog and other if needed) when migrating the system to a new installation? Thanks in advance

3 5

getting X started...
by Fred Smith 02 Dec '15

02 Dec '15

I've got a new VM installed for me by a sysadmin who apparently did a minmal install. As a result I've installed a bunch of things to try to get X going, including yum groupinstall "development and creative workstation", "Desktop platform" "mate desktop" but so far I've not found the incantation to get it to start up X at boot time. As far as I can tell, it doesn't even try. Once I log in, startx works fine. Can someone point me to whatever it is I'm missing here? thanks! -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

4 5

New monitor weirdnesses (CentOS 5.11)
by Robert Heller 01 Dec '15

01 Dec '15

I just got a new monitor for my desktop system (the old one died after *many* years of service). The new monitor is a high res 16:9 monitor, but the VESA video driver insists on using 1024x768 (which was the resolution of the *old* monitor). It does seem to detect higher, 16:9 resolutions but it is not using them. I *think* I need to set some low-level video mode thing, but it has been a long time since I have had to do that that I have totally forgotten how to do it. And I have been unable to find it with a websearch either. >From /var/log/Xorg.0.log: (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) VESA(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) VESA(0): Searching for matching VESA mode(s): Any of 1360x768, 1366x768, or 1280x720 would be fine. Following this are a pile of blocks starting with 'Mode: ...' or '*Mode: ...'. I think these are the modes the driver is reading from some 'magic' place and maybe the stared ones are 'matches' to the DCC mode lines. I think what I need to do is update this 'magic' place with a low-level program (probably eventually run in /etc/rc.local or someplace like that) that will add in a 'Mode' -- I did this *years* ago with little machines with Intel video chips and 16:9 monitors. But I am totally blanking on the command to use. I find using a 4:3 video mode on a 16:9 monitor somewhat unusable. I running CentOS 5.11 w/Xen. The video chipset is a NVIDIA Corporation C77 [GeForce 8200] (rev a2). I am using stock CentOS 5 drivers and libraries (slightly out of date). -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

5 4

Re: [CentOS] how do I download pictures from a dumb phone?
by Mike - st257 01 Dec '15

01 Dec '15

On Fri, Nov 27, 2015 at 10:26 PM, John R Pierce <pierce(a)hogranch.com> wrote: > >> dumb phone services have no email at all unless you pay Verizon or > whomever $$ per email message sent. > > Create a picture message and instead of putting in a cell phone number, put in an email address. Same goes for text messages. I've used BitPim in the past with some success. I don't believe I've ever used BitPim on CentOS though. For a few pictures, simply send picture messages to your email address. -- ---~~.~~--- Mike // SilverTip257 //

1 0

Idiot-proof method to format a flash drive
by Frank Cox 01 Dec '15

01 Dec '15

Whenever I format a flash drive I'm always terrified that I'm going to fat-finger something in the terminal and accidentally blow away a partition on one of my hard drives. *shudder* Is gparted the best gui to handle this task? Or is there something better? I'd really prefer something more limited that just allows me to select whatever it sees as a removable drive and disallows any screwin' about with the other drives. "Format the USB connected drive?". "Choose format (ext4, ext3, fat32)". "Blammo." -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

4 4

CentOS 7 and ips.ko
by gigzbyte 01 Dec '15

01 Dec '15

Hi all! I have the old IBM E-Server 346 with IBM ServeRAID 7-k controller. It works with CentOS 6 ips.ko module, but when i try to install fresh CentOS 7.1 - i can't find this module on the install cd and raid controller didn't recognised. How can i get it working? Thank you! ______________ With regards, Dmitry L --- Это сообщение проверено на вирусы антивирусом Avast. https://www.avast.com/antivirus

2 1

SOT: MariaDB 5.5.x-MariaDB logs are not going to desired .log file
by reynierpm＠gmail.com 30 Nov '15

30 Nov '15

Hi there, I know this is off-topic or semi off-topic but I really need some help since I am stucked. I'm trying to redirect MariaDB logs to `/var/log/mysql/*.log` files as shown below on the `/etc/my.cnf.d/server.cnf` file: # # These groups are read by MariaDB server. # Use it for options that only the server (but not clients) should see # # See the examples of server my.cnf files in /usr/share/mysql/ # # this is read by the standalone daemon and embedded servers [server] # this is only for the mysqld standalone daemon [mysqld] #wait_timeout=28800 #interactive_timeout = 28800 max_allowed_packet=512M #General Query Log general_log_file = /var/log/mysql/mysql_query.log general_log = 1 #Error Log log_error = /var/log/mysql/mysql_error.log #Slow Query Log slow_query_log = 1 slow_query_log_file = /var/log/mysql/mysql_slow.log long_query_time = 2 log-queries-not-using-indexes collation-server = utf8_general_ci init-connect='SET NAMES utf8' character-set-server = utf8 # this is only for embedded server [embedded] # This group is only read by MariaDB servers, not by MySQL. # If you use the same .cnf file for MySQL and MariaDB, # you can put MariaDB-only options here [mariadb] # This group is only read by MariaDB-10.0 servers. # If you use the same .cnf file for MariaDB of different versions, # use this group for options that older servers don't understand [mariadb-5.5] `mysql_query.log`, `mysql_error.log` and `mysql_slow.log` should go to `/var/log/mysql/`, right? For some reason, unknow to me, they are not going. I did run the following query: MariaDB [(none)]> show variables like '%log%'; And this is the output: +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ | Variable_name | Value | +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ | aria_checkpoint_log_activity | 1048576 | | aria_log_file_size | 1073741824 | | aria_log_purge_type | immediate | | aria_sync_log_dir | NEWFILE | | back_log | 50 | | binlog_annotate_row_events | OFF | | binlog_cache_size | 32768 | | binlog_checksum | NONE | | binlog_direct_non_transactional_updates | OFF | | binlog_format | STATEMENT | | binlog_optimize_thread_scheduling | ON | | binlog_stmt_cache_size | 32768 | | expire_logs_days | 0 | | general_log | OFF | | general_log_file | pdone-prod.log | | innodb_flush_log_at_trx_commit | 1 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_block_size | 512 | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 5242880 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | ./ | | innodb_mirrored_log_groups | 1 | | innodb_recovery_update_relay_log | OFF | | innodb_use_global_flush_log_at_trx_commit | ON | | log | OFF | | log_bin | OFF | | log_bin_trust_function_creators | OFF | | log_error | /var/lib/mysql/pdone-prod.pdi-inc.com.err | | log_output | FILE | | log_queries_not_using_indexes | OFF | | log_slave_updates | OFF | | log_slow_filter | admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk | | log_slow_queries | OFF | | log_slow_rate_limit | 1 | | log_slow_verbosity | | | log_warnings | 1 | | max_binlog_cache_size | 18446744073709547520 | | max_binlog_size | 1073741824 | | max_binlog_stmt_cache_size | 18446744073709547520 | | max_relay_log_size | 0 | | relay_log | | | relay_log_index | | | relay_log_info_file | relay-log.info | | relay_log_purge | ON | | relay_log_recovery | OFF | | relay_log_space_limit | 0 | | slow_query_log | OFF | | slow_query_log_file | pdone-prod-slow.log | | sql_log_bin | ON | | sql_log_off | OFF | | sync_binlog | 0 | | sync_relay_log | 0 | | sync_relay_log_info | 0 | +-------------------------------------------+--------------------------------------------------------------------------------------------------------------+ 54 rows in set (0.01 sec) I have tried putting same config at `[mariadb]` and `[mariadb-5.5]` and result is the same. Why changes are not working? I have restarted MariaDB (mysql) service several times and even I have restarted the whole server. Seems like MariaDB is not reading those values, any advice?

2 3

Thunderbird 38.4.0 not offered, see it in packages, repomd outdated?
by Patrick Bervoets 30 Nov '15

30 Nov '15

Hi, first: I did several yum clean all's :-) Thunderbird 38.4.0 is not offered. I see: http://mirror.centos.org/centos/6/updates/x86_64/Packages/thunderbird-38.4.… - 27-Nov-2015 06:58 - 56M But: http://mirror.centos.org/centos/6/updates/x86_64/repodata/repomd.xml - 18-Nov-2015 20:00 - 3.4K Shouldn't repomd also be updated or am I mistaken? Thanks Patrick

2 1

odd entry in /var/log/messages
by Fred Smith 29 Nov '15

29 Nov '15

As of five or so days ago I'm getting a ton of messages like those below in /var/log/messages: Nov 29 13:17:59 fcshome sendmail[24977]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:17:59 fcshome sendmail[24977]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:28:21 fcshome sendmail[25101]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:28:21 fcshome sendmail[25101]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:38:06 fcshome sendmail[25209]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:38:06 fcshome sendmail[25209]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:41:26 fcshome sendmail[25275]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:41:26 fcshome sendmail[25275]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:50:41 fcshome sendmail[25504]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 13:50:41 fcshome sendmail[25504]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:05:52 fcshome sendmail[25797]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:05:52 fcshome sendmail[25797]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:15:42 fcshome sendmail[25905]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:15:42 fcshome sendmail[25905]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:25:36 fcshome sendmail[26021]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:25:36 fcshome sendmail[26021]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:36:29 fcshome sendmail[26171]: unable to open Berkeley db /etc/sasldb2: No such file or directory Nov 29 14:36:29 fcshome sendmail[26171]: unable to open Berkeley db /etc/sasldb2: No such file or directory there are A TON of them. I've not (intentionally) configured sasl for sendmail. I do have dovecot configured so my wife can use pop3, and the authentication is specifically set to use the local linux box's username and password. It has been set that way for at least two years, and I've not changed anything. I did some googling and most of the hits talk about configuration errors in cyrus-sasl. But since I"m not running that, I don't know where else to dig. Anyone have a clue why I'm getting these, suddenly? and more importatnly, how to fix it? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For the word of God is living and active. Sharper than any double-edged sword, it penetrates even to dividing soul and spirit, joints and marrow; it judges the thoughts and attitudes of the heart." ---------------------------- Hebrews 4:12 (niv) ------------------------------

1 0

how do I download pictures from a dumb phone?
by Michael Hennebry 29 Nov '15

29 Nov '15

How do I download pictures from a dumb phone? I have a Samsung phone I bought at a Walmart. According the the front, it worships Verizon. Beyond that, I'm not at all sure what kind. If I use a real USB connector to connect it to my PC, CentOS sees it as a character special device. What, if anything, I can do with that device, I do not know. I've not found any settings related to USB. In case it helps, from menu->settings->phone info: S/W V. U365.GG01 H/W V. U365.04 -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

5 10

Networking Question
by Alice Wonder 27 Nov '15

27 Nov '15

Hello, I may have opportunity to obtain a Intel EXPI9404PTLBLK PRO/1000 PT Quad Port ethernet adapter at a significantly reduced price. What I would like to do with it, I want to make sure it is possible and sane before I buy it. -=- Device sits in CentOS box that connects directly to Internet via onboard network adapter. It pretty much only acts as a NAT router + dhcp server + unbound recursive DNS for the private networks. The four ethernet interfaces on the Intel adapter then : Private Network A: 192.168.10.0/24 Private Network B: 192.168.20.0/24 Private Network C: 192.168.30.0/24 Private Network D: 192.168.40.0/24 A will have a NAS. I can reach it from Internet (via port forwarding) and B and C (routing table) but from it, I can not connect to Internet or B, C, D. That network which likely will only have a few devices can not initiate connection to Internet or the other networks. B is my trusted home network. It can connect to Internet (NAT) and to A (port forwarding) but can not reach C or D C is untrusted home network. Things like my TV and Bluray player that need Internet access but that I don't want to have the ability to reach anything on B, but I do want them to be able to talk to NAS on A via port forwarding. I'm always paranoid about those devices on my network, I don't trust what they are doing. Call it tin foil but I don't trust them. Yet they don't work right without access to Internet (updates / netflix) D when used is network for guests (will have cheap wifi attached), it only talks to Internet via straight NAT and can not talk to private networks A, B, C -=- Is this sane ?

6 12

xfs or btrfs
by Milton Plasencia 27 Nov '15

27 Nov '15

Hi, For real time applications, what file system is recommended to use, XFS or BTRFS on Centos 7 or Redhat 7? Cheers, M.

4 3

Re: [CentOS] Newbie alert
by James B. Byrne 27 Nov '15

27 Nov '15

On Thu, November 26, 2015 12:30, John R Pierce wrote: > > how open is RH to bug fix submissions from non-customers? > > I got the impression most of their bug fixes were done internally by > employees, a large part of which consists of backporting fixes from > upstream FOSS projects. > This is my experience as well. The only thing that RedHat has ever done with my bug reports is point me to the upstream projects to have it fixed/altered/added there. They will however, occasionally accept some nudges about updating software that the upstream project has already released. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

LDAP setup on Centos 7
by Gary Stainburn 27 Nov '15

27 Nov '15

I am trying to get LDAP working on my mail server for both user authentication and addressbook purposes. I have tried the tutorials on both http://www.server-world.info/en/note?os=CentOS_7&p=openldap&f=1 and http://albanianwizard.org/ubuntu-10-0-4-lucid-lynx-ldap-configuration-the-w… (The second one is for Ubuntu, but claimed to be a complete and working demo) However, when I try to last part of each of these tutorials I get the following. ldapadd -x -D cn=admin,dc=ringways,dc=com -W -f /tmp/dit.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Note: in the server-world one I tried using "dc=ringways,dc=com" as well as leaving it as "dc=server,dc=world" but it didn't seem to make any difference. After each attempt I reset everything using the following script. [root@ollie2 ~]# cat reset_ldap.sh #!/bin/bash -x systemctl stop slapd rpm -e openldap-servers openldap-clients cd /var/lib rm -Rf ldap cd /etc/openldap/ rm -Rf slapd.d/ yum -y install openldap-servers openldap-clients cp /usr/share/openldap-servers/DB_CONFIG.example /var/lib/ldap/DB_CONFIG systemctl start slapd slaptest -F /etc/openldap/slapd.d [root@ollie2 ~]# Do I need to do anything else, as it would appear that there is something I'm missing.

3 6

CentOS-announce Digest, Vol 129, Issue 10
by centos-announce-request＠centos.org 27 Nov '15

27 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2519 Important CentOS 5 thunderbird Security Update (Johnny Hughes) 2. CESA-2015:2519 Important CentOS 6 thunderbird Security Update (Johnny Hughes) 3. Announcing Release for Gluster 3.7 on CentOS Linux 7 x86_64 (Niels de Vos) ---------------------------------------------------------------------- Message: 1 Date: Fri, 27 Nov 2015 06:41:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2519 Important CentOS 5 thunderbird Security Update Message-ID: <20151127064112.GA26875(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2519 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2519.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bb8e25af5ff6287b1e25e1f022e4fa5194721bf442d1ad84523cc3000b320d8e thunderbird-38.4.0-1.el5.centos.i386.rpm x86_64: b234caf73d4d5b8819dc8ba3fd8a15f9a221b8f90dd3e4ebdbb9331dd5dcf86c thunderbird-38.4.0-1.el5.centos.x86_64.rpm Source: 080d0b3b6404131402cc2da5db51316ba96c6944488f8d44a7d788cdcf82a24d thunderbird-38.4.0-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 27 Nov 2015 06:59:48 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2519 Important CentOS 6 thunderbird Security Update Message-ID: <20151127065948.GA52471(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2519 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2519.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7d94acf6d46a4ffa415d8eefece825154c79f6c080b694c3f0780dd9b65271d6 thunderbird-38.4.0-1.el6.centos.i686.rpm x86_64: 655c0162a6bb9d918c8a497531329d5ba13225a2cea9ce5f46756426ad066cbc thunderbird-38.4.0-1.el6.centos.x86_64.rpm Source: 58473f1a2f8951dd8f8b2276f07e3c2da8894a1f8ebaa65b0b4d90d6eb63a50b thunderbird-38.4.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 27 Nov 2015 11:35:32 +0100 From: Niels de Vos <ndevos(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing Release for Gluster 3.7 on CentOS Linux 7 x86_64 Message-ID: <20151127103532.GM6779(a)ndevos-x240.usersys.redhat.com> Content-Type: text/plain; charset="us-ascii" Over the last few weeks we have been working on getting the repositories and related bits in place so that the Storage SIG is able to release Gluster packages for general consumption. I am pleased to announce that the majority of the requested versions are now available. Users can now simple install Gluster on CentOS 6 and 7 with only these two commands: # yum install centos-release-gluster # yum install glusterfs-server The centos-release-gluster content comes from the centos-release-gluster37 package delivered via CentOS Extras repos. This contains all the metadata and dependancy information, needed to install Gluster 3.7. For people looking at running Gluster 3.6, we will soon also release a centos-release-gluster36 package. In order to get this version, substitute the step-1 mentioned above with : yum install centos-release-gluster36. A new announcement will be posted once this content has been tested and released. We have a quickstart guide specifically built around the packages we are releasing today, it makes for a good introduction to Gluster and will help get you started in just a few simple steps, this quick start is available at https://wiki.centos.org/SpecialInterestGroup/Storage/gluster-Quickstart More details about the packages that the Gluster project provides in the Storage SIG is available in the documentation: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster The centos-release-gluster* repositories offer additional packages that enhance the usability of Gluster itself. Users can request additional tools and applications to be provided, just send us an email with your suggestions. The current list of packages that is (planned to become) available can be found here: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster/Ecosystem-pkgs Gluster is the first project that provides packages through the Storage SIG. Other projects are in the process to do so too. General information about the SIG can be read in the wiki: https://wiki.centos.org/SpecialInterestGroup/Storage We welcome all feedback, comments and contributions. You can get in touch with the CentOS Storage SIG on the centos-devel mailing list ( https://lists.centos.org ) and with the Gluster developer and user communities at https://www.gluster.org/mailman/listinfo , we are also available on irc at #gluster on irc.freenode.net, and on twitter at @gluster . Cheers, Niels de Vos Storage SIG member & Gluster maintainer

1 0

Does anaconda serve any purpose after installation?
by Frank Cox 27 Nov '15

27 Nov '15

Is there any reason or need to keep anaconda around after a system is up and running, or would "yum remove anaconda" be a good idea? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

2 1

C7: How to configure raid at install time
by Fred Smith 27 Nov '15

27 Nov '15

Hi all! I'm still on C6. I'm using a RAID1 configuration (Linux software RAID) and I'd like to either use the same one, or possibly configure it on new drives (larger) when I upgrade to C7. (I'm really feeling the need to move off C6.) But it isn't at all obvious how one would do a new RAID1 setup in Anaconda, and I don't find any user reports or other info on this in the WIKI or forums (fora, properly, if I recall my high school Latin). Can anyone provide (or give pointers to) a good recipe for doing this? thanks! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

7 22

install rrdtools-devel / rrdtool-perl
by Leandro 26 Nov '15

26 Nov '15

Hi guys , Im have some problems installing the following packages: rrdtool-devel rrdtool-perl Before we moved to centos/rhel7 it was a simple task, just doing: yum install rrdtool rrdtool-devel and rrdtool-perl was enough. Now, I only can install the rrdtool package but not rrdtool-devel and rrdtool-perl. I tryed adding some repos, but I think I added wrong ones. Also tryed downloading and installing packages with rpm -ivh but there is allwais a missing dependence. Can you help me ? Thanks.

5 10

OT: bareos, Windoze, beating head on wall
by m.roth＠5-cent.us 26 Nov '15

26 Nov '15

Again, I'm posting here because when I tried their mailing list, I didn't get much response. I'm trying to do a restore, from my CentOS 6 box, to a WinDoze box. The restore command is *not* user-friendly if you just want to restore a few files. And it gets weird.... First, I have to mark my path first - I don't just see it with ls. Then, when I do an ls, in c:/Users/<username/Documents/, it shows *MATLAB *My Music *My Pictures *My Videos *Visual Studio 2005/ *Visual Studio 2008/ *desktop.ini *None* of which are there. All that's there are teo files, testfile.bak and testfile.txt. MATLAB is in some other user's directory.... Here's the fileset spec from bareos-dir.conf FileSet { Name = "citdcbhebronset" Include { Options { Signature = MD5 # calculate md5 checksum per file Ignore Case = yes } File = "c:/Users" } } Anyone have any clue as to what I'm doing wrong? Googling - a lot of it - gives me 90% the bareos docs, and very little else. mark

3 7

Newbie alert
by Shraddha Barke 26 Nov '15

26 Nov '15

Hello guys! I'm Shraddha , an opensource enthusiast and a regular contributor to the linux-kernel project. I'm currently an intern at Linux Kernel selected through the Outreachy program. I started contributing to opensource only 5 months ago but I'm already quite active. I would like to join the centos project.Any help on getting started is appreciated :) Kind Regards, Shraddha -- Shraddha

4 6

IP table Restore
by Siva Prasad Nath 26 Nov '15

26 Nov '15

Hi, If possible advice me for below error. [root@ns1 sysconfig]# iptables-restore < /etc/sysconfig/iptables iptables-restore: line 2 failed Thanks in advance.

8 17

Glibc vulnerbality CVE-2015-1781
by Venkateswara Rao Dokku 26 Nov '15

26 Nov '15

Hi, We are using CentOS 5.5 as a base OS for one of our products.The version of Glibc we are using was glibc-2.5-123.el5_11.1. We wanted to see whether this glibc is vulerable to CVE-2015-1781. I have gone through re-documentation & came across the following link https://access.redhat.com/security/cve/cve-2015-1781 In the link it is mentioned that, the CVE will not be fixed in Red-Hat 5 version. What does that mean? I mean, whether the RedHat 5 is vulnerable & fix is not available or RedHat 5 is not vulnerable, hence the fix is not given? Thanks for the info. -- Thanks & Regards, Venkat

3 2

Help with Intel 6235 Wireless on CentOS 7 (pointer to good reading?)
by Valeri Galtsev 25 Nov '15

25 Nov '15

Dear Experts, I would like to ask your advise on good reading about how to add WiFi device, and how to control its settings on CentOS. Sounds really dumb, but this is what I am NOT able to do on CentOS 7 what I was able to do in the past, beginning somewhere since RedHat 5 or 6, through Fedora and up to CentOS 6. In brief: my card is Intel 6235; CentOS 7 (fully updatted), latest kernel (3.10.0-229.20.1), relevant Intel firmware version for my card is in /lib/firmware (together with large bunch of other Intel WiFi firmware), relevant modules are loaded in kernel: iwlwifi iwldvm mac80211 cfg80211 "/sbin/ifconfig -a" shows my device in the list renamed to wlp3s0 (according to PCI slot numbering I figure), dmesg shows device brought up successfully detected and renamed as above. lspci shows device with its correct full name (Network controller: Intel Corporation ... 6235" Now comes the fun part (no, troublesome for me part). When I click on the NetworkManager Applet in right top corner, there are no WiFi devices. I go to Network Settings from there. My device is in the list under name "PCI Unknown". I click on that, the device is described as "unmanaged", and there is no way to make changes to the contrary to other devices (correct MAC address is displayed). OK, I assume I just need to declare device as NM_CONTROLLED. There is no relevant /etc/sysconfig/ifcfg-wlp3s0 - where I know I can declare that. I use "nmtui" to add configuration, then add to ifcfg-wlp3s0 NM_CONTROLLED="yes" line. Reboot. Still the same. Just for comparison I booted Ubuntu 14.0.4 x86_64 live CD. Yes, it can see my wireless, and I can connect to WiFi networks. Kernel is just a notch newer (3.13.0.24) which shouldn't matter according to Intel information which kernel versions this device is supported in. List of relevant kernel modules loaded by ubuntu is exactly the same. I don't see anything weird like the need to separately load firmware as kernel module (yes, indeed I'm going nuts, that would be "freebsd-ism" I guess). I do not want to have Ubuntu (or Debian which likely will work out of the box too) on this laptop. So, apparently I need a pointer to good reading on how do we do it on CentOS 7 "dirty way" - when "click here, choose in menu that" doesn't work. Thanks a lot for your advises! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

2 2

Install Firewalld
by Siva Prasad Nath 25 Nov '15

25 Nov '15

I am trying to install Firewalld. I am using CENTOS 7. Please help me to solve the error. [root@ns1 httpd]# systemctl enable firewalld [root@ns1 httpd]# systemctl start firewalld [root@ns1 httpd]# systemctl status firewalld firewalld.service - firewalld - dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled) Active: inactive (dead) since Thu 2015-11-26 02:43:16 SGT; 11s ago Process: 35808 ExecStart=/usr/sbin/firewalld --nofork --nopid $FIREWALLD_ARGS (code=exited, status=0/SUCCESS) Main PID: 35808 (code=exited, status=0/SUCCESS) Nov 26 02:43:16 ns1.currencybooking.com systemd[1]: Started firewalld - dynamic firewall daemon. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 ERROR: ebtables not usable, disabling ethernet bridge firewall. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 FATAL ERROR: No IPv4 and IPv6 firewall. Nov 26 02:43:16 ns1.currencybooking.com firewalld[35808]: 2015-11-26 02:43:16 ERROR: Raising SystemExit in run_server [root@ns1 httpd]# ERROR: ebtables not usable, disabling ethernet bridge firewall.^C [root@ns1 httpd]# firewall-cmd --state not running Shiva Prasad Nath 92981134

2 1

Poor perfmance of bridged interfaces
by Sergio Belkin 25 Nov '15

25 Nov '15

Hi, I've created a bridge using 2 interfaces and have a lot of messages as follows: nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address And the operating systems is extremely slow Interfaces files : [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-* DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #STP=on #DELAY=0 NM_CONTROLLED=no DEVICE=enp0s3 #HWADDR=08:00:27:AB:1D:E6 BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no BRIDGE=br0 DEVICE=enp0s8 HWADDR=08:00:27:A3:98:E6 BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no BRIDGE=br0 DEVICE=lo TYPE=loopback IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback I've disabled NetworkManager, but problem persists. System is: [root@localhost ~]# uname -a Linux localhost 3.10.0-123.el7.x86_64 #1 SMP Mon Jun 30 12:09:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux And is virtualized on VirtualBox Please could you help me to fix it? Thanks in advance! -- -- Sergio Belkin LPIC-2 Certified - http://www.lpi.org

9 25

OT: Replacing Venerable NAS
by Tim Evans 25 Nov '15

25 Nov '15

I have an original-label Infrant (now NetGear) ReadyNAS storage appliance that's been running for 8+ years. Except for replacing its power supply, it has not skipped a beat in all this time. I use it primarily as a backup device (via NFS) for a couple of Linux machines, (via SMB) for a couple of Windows PC's, and (via ftp) for web sites at my hosting provider. SMART+ reporting shows ~75K hours operation, with zero sectors reallocated, on each of the four disks. I'm thinking I should be looking for a replacement, even with all this good info/luck. Would like to hear recommendations here. Besides the ReadyNAS, I have worked with a Thecus NAS (don't recall model). What are the features I should look at? Thanks. -- Tim Evans |5 Chestnut Court 443-394-3864 |Owings Mills, MD 21117

14 24

Re: [CentOS] Google Ads in rsyslog documentation files
by m.roth＠5-cent.us 25 Nov '15

25 Nov '15

Peter Eckel wrote: > Hi all, > > I know this comes from upstream (and most likely from the rsyslog project itself), but what's your opinion about Google Ads in system documentation files? > >> [peckel@mucnvjmppmtr01 ~]$ cat /etc/redhat-release >> Red Hat Enterprise Linux Server release 6.7 (Santiago) >> [peckel@mucnvjmppmtr01 ~]$ grep google /usr/share/doc/rsyslog-5.8.10/* /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_client = "pub-3204610807458280"; >> /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_slot = "5958614527"; >> /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_width = 125; <snip> > I find it rather disconcerting if there are commercial ads embedded in help texts I find on my open source servers. "Disconcerting" isn't the word I would use. Completely unacceptable is what I'd say. I think it's time to put in a bug report to upstream.... I need to check with my manager. I do note this is not the case in rsyslog on CentOS 7. mark

3 4

Regional CentOS Specific Meetup groups
by Karanbir Singh 25 Nov '15

25 Nov '15

Hi, Just a quick post to say that I've setup a CentOS users group in the UK at http://www.meetup.com/CentOS-UK - aim to start organising regular demos and meetups face 2 face around the country. If you are based in the UK, I encourage you to come join the group. Also note that we have a CentOS group in India at http://www.meetup.com/CentOS-India/ and another group for the Netherlands at http://www.meetup.com/CentOS-Netherlands/ Regards and hope to see you at one of these meetups soon, -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc

1 0

How & where to add
by Siva Prasad Nath 24 Nov '15

24 Nov '15

auto eth0 iface eth0 inet static address 192.168.50.2 netmask 255.255.255.0 -- Shiva Prasad Nath 92981134

4 3

LVM - stripped logical volumes by default?
by Rafał Radecki 24 Nov '15

24 Nov '15

Hi All. I am currently using OpenStack Juno on CentOS 7. The problem is that by default OpenStack's Cinder service creates logical volumes of "linear" type. I would like to have them stripped over all physical disks to get better write performance. Is there a way to tell LVM to create by default stripped volumes instead of linear ones? BR, Rafal.

1 0

Re: [CentOS] Unit networkmanager.service not loaded
by Richard 24 Nov '15

24 Nov '15

> >> On Tue, Nov 24, 2015 at 11:01 PM, Richard wrote: > Date: Tuesday, November 24, 2015 22:48:30 +0800 > From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org>, centos-devel(a)centos.org > Subject: [CentOS] Unit networkmanager.service not loaded > > systemctl stop networkmanager returns Unit > networkmanager.service not loaded > >> >> Hint -- try the: >> >> systemctl list-units | grep ... >> >> concept that you used previously and see what output you get. >> [sub-hint -- the *nix world is case sensitive.] >> >> This is a user (understanding) issue -- why are you including the >> "-devel" list? Don't. >> >> >>> Date: Tuesday, November 24, 2015 23:19:53 +0800 >>> From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> >>> >>> I can see below in development server >>> network.service >>> loaded active exited LSB: Bring up/down >>> networking NetworkManager.service >>> loaded active running Network Manager >>> >>> But not able to see in production. >>> >>> >>> Shiva Prasad Nath Well then, you need to figure out what you did differently in setting up these two environments. This is something specific to your process and procedures (or hardware/environment). There's not much that we can help you with as you haven't provided any details. Please do not top post on this list.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss