- Discuss - lists.centos.org

Re: [CentOS] Unit networkmanager.service not loaded
by Richard 24 Nov '15

24 Nov '15

> Date: Tuesday, November 24, 2015 22:48:30 +0800 > From: Siva Prasad Nath <shivaprasadnath21(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org>, centos-devel(a)centos.org > Subject: [CentOS] Unit networkmanager.service not loaded > > systemctl stop networkmanager returns Unit networkmanager.service > not loaded Hint -- try the: systemctl list-units | grep ... concept that you used previously and see what output you get. [sub-hint -- the *nix world is case sensitive.] This is a user (understanding) issue -- why are you including the "-devel" list? Don't.

2 1

Unit networkmanager.service not loaded
by Siva Prasad Nath 24 Nov '15

24 Nov '15

systemctl stop networkmanager returns Unit networkmanager.service not loaded

1 0

LVM - how to change lv from linear to stripped? Is it possible?
by Rafał Radecki 24 Nov '15

24 Nov '15

Hi All. Currently I am trying to change a logical volume from linear to stripped because I would like to have a better write throughput. I would like to perform this change "live" without stopping access to this lv. I have found two interesting examples: http://community.hpe.com/t5/System-Administration/Need-to-move-the-data-fro… http://www.depesz.com/2015/10/08/converting-logical-volume-so-that-its-stri… Both say basically to: - change the lv to a mirrored one by adding a stripped copy (~second device in RAID1) - change it back to a non-mirrored one by removing the primary linear lv (~first, source device in RAID1) My os is: $ cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) $ uname -r 3.10.0-229.14.1.el7.x86_64 $ rpm -qa | grep -i lvm lvm2-libs-2.02.115-3.el7_1.1.x86_64 lvm2-2.02.115-3.el7_1.1.x86_64 And the solution proposed in above examples does not work on it. After (lv xxx is only on /dev/sdb4 before): # lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4 I am getting in "lvdisplay -m": --- Logical volume --- LV Path /dev/cinder-volumes/xxx LV Name xxx VG Name cinder-volumes LV UUID AKjKAo-66cv-Ygc2-4Ykq-sSJQ-RJOY-mfjoMD LV Write Access read/write LV Creation host, time test.local, 2015-10-28 17:45:28 +0100 LV Status available # open 1 LV Size 64.01 GiB Current LE 16386 Mirrored volumes 2 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:22 --- Segments --- Logical extents 0 to 16385: Type raid1 Monitoring monitored Raid Data LV 0 Logical volume xxx_rimage_0 Logical extents 0 to 16385 Raid Data LV 1 Logical volume xxx_rimage_1 Logical extents 0 to 16385 Raid Metadata LV 0 xxx_rmeta_0 Raid Metadata LV 1 xxx_rmeta_1 And in "pvdisplay -m": --- Physical volume --- PV Name /dev/sda4 VG Name cinder-volumes PV Size 2.73 TiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 715255 Free PE 287476 Allocated PE 427779 PV UUID IrkkwI-AqpP-bTll-vlPq-NDSe-rDUg-ecAnkp ... Physical extent 427776 to 427776: Logical volume /dev/cinder-volumes/xxx_rmeta_1 Logical extents 0 to 0 Physical extent 427777 to 444162: Logical volume /dev/cinder-volumes/xxx_rimage_1 Logical extents 0 to 16385 --- Physical volume --- PV Name /dev/sdb4 VG Name cinder-volumes PV Size 2.73 TiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 715255 Free PE 698868 Allocated PE 16387 PV UUID hx0a1v-M68S-aPBL-1x9r-8EiD-3cu3-GQPLRo --- Physical Segments --- Physical extent 0 to 0: Logical volume /dev/cinder-volumes/xxx_rmeta_0 Logical extents 0 to 0 Physical extent 1 to 16386: Logical volume /dev/cinder-volumes/xxx_rimage_0 Logical extents 0 to 16385 Physical extent 16387 to 715254: FREE So the migration to a RAID1 logical volume is successful but the stripping (above "lvconvert --mirrors 1 --stripes 4 /dev/cinder-volumes/xxx /dev/sda4 /dev/sdc4 /dev/sdd4 /dev/sdf4") is not taken into consideration because only /dev/sda4 and /dev/sdb4 are used for xxx logical volume afterwards. Also when I run: # lvconvert -m 0 /dev/cinder-volumes/xxx /dev/sdb4 afterwards I get xxx logical volume only on /dev/sda4 and it is linear (not stripped). Can someone help me with this? ;) BR, Rafal.

1 0

Google Ads in rsyslog documentation files
by Peter Eckel 24 Nov '15

24 Nov '15

Hi all, I know this comes from upstream (and most likely from the rsyslog project itself), but what's your opinion about Google Ads in system documentation files? > [peckel@mucnvjmppmtr01 ~]$ cat /etc/redhat-release > Red Hat Enterprise Linux Server release 6.7 (Santiago) > [peckel@mucnvjmppmtr01 ~]$ grep google /usr/share/doc/rsyslog-5.8.10/* > /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/rsyslog_secure_tls.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_ca.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_ca.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_ca.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_ca.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_ca.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_client.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_client.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_client.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_client.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_client.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_errmsgs.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_errmsgs.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_errmsgs.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_errmsgs.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_errmsgs.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_machine.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_machine.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_machine.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_machine.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_machine.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_scenario.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_scenario.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_scenario.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_scenario.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_scenario.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_server.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_server.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_server.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_server.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_server.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_summary.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_summary.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_summary.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_summary.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_summary.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> > /usr/share/doc/rsyslog-5.8.10/tls_cert_udp_relay.html:google_ad_client = "pub-3204610807458280"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_udp_relay.html:google_ad_slot = "5958614527"; > /usr/share/doc/rsyslog-5.8.10/tls_cert_udp_relay.html:google_ad_width = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_udp_relay.html:google_ad_height = 125; > /usr/share/doc/rsyslog-5.8.10/tls_cert_udp_relay.html:src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> I find it rather disconcerting if there are commercial ads embedded in help texts I find on my open source servers. Best regards, Peter.

1 0

Unit network.service has failed
by Siva Prasad Nath 24 Nov '15

24 Nov '15

Sorry for disturbing all of you again and again. Network service cannot be started. All the commands are not working. How to start network service?net-tool already exists. -- Shiva Prasad Nath 92981134

5 5

Kickstarting CentOS 7 VM on CentOS 6 not possible?
by Jos Vos 24 Nov '15

24 Nov '15

Hi, On CentOS 6.7 (all updates) kickstarting a CentOS 7 VM (in the way it always has worked for other versions, incl. Fedora 22 VM's), does not work for me. I use virt-install with a local copy of the "images/pxeboot" tree. It all stops with: ... [ OK ] Reached target Paths. [ OK ] Reached target Basic System. dracut-initqueue[551]: Warning: Could not boot. dracut-initqueue[551]: Warning: /dev/root does not exist Starting Dracut Emergency Shell... Warning: /dev/root does not exist ... I found zillion references to similar problems, including PXE-related (I do not use PXE, but "-l" with virt-install) and cobbler-related (no Cobbler involved), and I tried some of the suggestions, but none of them worked. Installing CentOS 7 "manually" using virt-install and the netboot ISO works fine, but I want to use kickstart files. Thanks for any suggestion. -- -- Jos Vos <jos(a)xos.nl> -- X/OS Experts in Open Systems BV | Phone: +31 20 6938364 -- Amsterdam, The Netherlands | Fax: +31 20 6948204

3 4

Kernel route table is empty
by Siva Prasad Nath 24 Nov '15

24 Nov '15

I can add using ifconfig and route. Then I can see kernel route entry table. I reboot system. Then route table is empty. How to make kernel route entry table permanent. -- Shiva Prasad Nath 92981134

2 1

Selling DVD image which include CentOS and our application
by Takuya Yamamoto 24 Nov '15

24 Nov '15

Dear ALL Our company make and sell some measurement system controlled by Server. There is no technical issue but we don't have enough information about license. We will do the following, 1) We make the DVD image which include CentOS and our application. 2) Sell DVD to our customer. 3) Customer installs this image (CentOS and our applications) on the Server. Question 1 Is there no problem from the view point of CentOS license? Question 2 We'd like to know what we should do to CentOS community? e.g. contract, donate I read following past ML https://lists.centos.org/pipermail/centos/2010-June/096074.html But, I want to know latest your comment. br ----------------------- Yamamoto Takuya NEC Platforms, Ltd. NEC Platforms, Ltd. Confidential

2 1

Building for older versions
by Michael Eager 23 Nov '15

23 Nov '15

Hi -- I'm trying to build an application on CentOS 7 which can run on older versions of CentOS. I'm running into problems with versioning of memcpy in Glibc. Executables built on CentOS 7 require memcpy from glibc-2.14, which causes the program not to load on systems with older versions of glibc. My online search suggests to add an asm() with a .symver option to select memcpy from glibc-2.2.5 in each of the source files which reference memcpy(). This isn't practical with a program with tens of thousands of source files. Does anyone have a reasonable solution? -- Michael Eager eager(a)eagercon.com 1960 Park Blvd., Palo Alto, CA 94306 650-325-8077

4 9

Virtual Server in Windows 7
by Siva Prasad Nath 23 Nov '15

23 Nov '15

Hi, I am creating a virtual machine. My laptop is i686 system. Please advice me which Centos verson can be downloaded? With regards, Shiva

2 2

httpd 2.3 or 2.4 repository for CentOS 6.X anywhere?
by Jobst Schmalenbach 23 Nov '15

23 Nov '15

Hi is there a yum repository for httpd 2.3 or 2.4 for CentOS 6.X anywhere? Like remi for php/mysql? thanks Jobst -- f u cn rd ths, u cn gt a gd jb n cmptr prgmmng. [Anon] | |0| | Jobst Schmalenbach, jobst(a)barrett.com.au, General Manager | | |0| Barrett Consulting Group P/L & The Meditation Room P/L |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia

2 2

After reboot of web-server accessing website shows "Forbidden", restarting httpd all is fine
by Jobst Schmalenbach 23 Nov '15

23 Nov '15

Hi. I am stuck with this one and I do not know where and how to search for this problem nor do I know how to fix it. When I reboot one of our servers (CentOS 6.7, selinux target, yum fully updated) the http server loads fine (no erros) but when accessing one of the server's websites it displays "Forbidden", restarting the httpd server (command line) will give full access and all is fine. What troubles me that a simple restart of the daemon fixes everything but it does not come up on reboot. [Sat Nov 07 13:02:44 2015] [notice] caught SIGTERM, shutting down [Sat Nov 07 13:02:45 2015] [notice] SELinux policy enabled; httpd running as context unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 [Sat Nov 07 13:02:45 2015] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sat Nov 07 13:02:45 2015] [notice] Digest: generating secret for digest authentication ... [Sat Nov 07 13:02:45 2015] [notice] Digest: done [Sat Nov 07 13:02:45 2015] [notice] Apache/2.2.15 (Unix) PHP/5.4.45 mod_ssl/2.2.15 OpenSSL/1.0.1e-fips mod_wsgi/3.2 Python/2.6.6 mod_perl/2.0.4 Perl/v5.10.1 configured -- resuming normal operations I started it with an strace but I cant find anything that looks suspicious ... Putting selinux into permissive mode starts the server right from boot. Looking at all the logs I cannot see anything. Any ideas? Jobst -- Though the pen IS mightier than the sword, the sword is mightier at any given moment. | |0| | Jobst Schmalenbach, jobst(a)barrett.com.au, General Manager | | |0| Barrett Consulting Group P/L & The Meditation Room P/L |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia

6 8

Urgent Help
by Siva Prasad Nath 23 Nov '15

23 Nov '15

Hi, >From yesterday my server was down. It was showing only rescue menu. I copy grub.cfg to grub.cfg.old. Replace grub.cfg from another server. Now I cannot start server. How to revert back grub.cfg and how to put vm in the boot folder? Thanks in advance. Shiva

7 12

[Slightly OT] - Looking for shadow-utils 4.2 SIG or SCL
by Anthony K 22 Nov '15

22 Nov '15

Hi. I'm looking to run unprivileged containers on CentOS 7 and this apparently requires shadow-utils 4.2 or higher [*0*]. CentOS 7 currently has: # rpm -q shadow-utils shadow-utils-4.1.5.1-18.el7.x86_64 Is there a SIG or SCL that provides an updated package to facilitate my venture or am I left with the only choice of manually managing shadow-utils if I go the route of rpmbuild? AK. [*0*]: https://it-offshore.co.uk/linux/centos/29-centos-7-unprivileged-lxc-contain…

1 0

CPU Limit in Centos
by Edward Ned Harvey (centos) 21 Nov '15

21 Nov '15

A few years ago, I vaguely recall some issue with RHEL needing a special license or something like that, if you had more than a certain amount of CPU's or a certain amount of RAM. Does Centos work fine for 2 CPU's, 16 cores, 32 threads, and 256 G of ram? Centos6 specifically.

3 4

Re: [CentOS] CPU Limit in Centos
by Valeri Galtsev 21 Nov '15

21 Nov '15

On Sat, November 21, 2015 8:29 am, Edward Ned Harvey (centos) wrote: > A few years ago, I vaguely recall some issue with RHEL needing a special > license or something like that, if you had more than a certain amount of > CPU's or a certain amount of RAM. > > Does Centos work fine for 2 CPU's, 16 cores, 32 threads, and 256 G of ram? > > Centos6 specifically. I have CentOS 6 box with 4 CPUs, 64 CPU cores and 512 GB of RAM... for about two years. Runs great. Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

1 0

FYI for CentOS 6.x Users: FireFox 43+ Requires gtk3
by Tim Evans 21 Nov '15

21 Nov '15

https://www.mozilla.org/en-US/firefox/43.0beta/system-requirements/ -- Tim Evans |5 Chestnut Court 443-394-3864 |Owings Mills, MD 21117

2 1

EL7: Detecting FS errors on XFS while mounted
by Benjamin Smith 20 Nov '15

20 Nov '15

Is there a way of checking an XFS filesystem for clean/dirty status while mounted? One of the checks we've long performed is an FS-level error check. This is *not a full-on fsck*, this is "asking the file system if it noted any problems". This is done while the file system is mounted and "hot". For example, here's how we'd check an ext* partition: # debugfs -R "show_super_stats -h" /dev/md127 | grep -i "Filesystem state" We'd look for "Filesystem state: clean" (or something else if not clean). ZFS also allows for a "hot & mounted" check for dirty file system: # zpool status So far, I've been unsuccessful in finding an equivalent for XFS.

2 1

Linux ate my RAM...
by Kwan Lowe 20 Nov '15

20 Nov '15

Hello everyone, Excuse the title. I'm trying to do something very specific that goes against some common assumptions. I am aware of how Linux uses available memory to cache. This, in almost all cases, is desirable. I've spent years explaining to users how to properly read the free output. I'm now trying to increase VM density on host systems (by host, I mean the physical system, not the underlying guest machines). VMWare can over-allocate memory as long as it's not being used. Because of caching, from VMWare's perspective, all Linux memory is being "used". I am aware of the inherent risks in over-allocation of resources on a VMWare system.This tuning is strictly for development systems where performance and stability are not as critical. The increase in vm density is an acceptable tradeoff. My questions: 1) What options are available in CentOS to limit the page cache? SuSe has vm.pagecache_limit_mb and vm.pagecache_limit_ignore_dirty which, in conjunction with swappiness tweaks, appears to do what I need. 2) Any experience with enabling /sys/kernel/mm/ksm/run on non-KVM workloads? As KSM only applies to non-pagecache memory, it doesn't immediately help me here but could be incrementally useful (https://www.kernel.org/doc/Documentation/vm/ksm.txt) 3) Is there any way to control /proc/sys/vm/drop_caches and limit it to a number of entries or age? Dropping the filesystem cache, though it unmarks those pages, has performance implications. Thanks in advance for any input or links.

4 6

Cannot boot
by Siva Prasad Nath 20 Nov '15

20 Nov '15

Hi, My server not able to boot up. It is hanging after few times. How to repair boot system? I am trying to use grub2-install. Is it necessary to install grub2 on boot device? Please help. Thanks in advance. -- Shiva Prasad Nath 92981134

3 6

Kernell
by Siva Prasad Nath 20 Nov '15

20 Nov '15

Hi, I think during rescue mode we cannot access internet. I thought by installing kernel again will solve my problem. But after deleting I cannot retrieve back kernel and I can see rescue menu only. Please help asap. Thanks in advance. Shiva -- Shiva Prasad Nath 92981134

1 0

Intel SSD
by Birta Levente 20 Nov '15

20 Nov '15

Hi I have a supermicro server, motherboard is with C612 chipset and beside that with LSI3108 raid controller integrated. Two Intel SSD DC S3710 200GB. OS: Centos 7.1 up to date. My problem is that the Intel SSD Data Center Tool (ISDCT) does not recognize the SSD drives when they connected to the standard S-ATA ports on the motherboard, but through the LSI raid controller is working. Does somebody know what could be the problem? I talked to the Intel support and they said the problem is that Centos is not supported OS ... only RHEL 7. But if not supported should not work on the LSI controlled neither. Thanks, -- Levi

8 15

CentOS7 kickstart failed ( no such option: --bytes-per-inode)
by Mihoko.Tanaka＠jp.yokogawa.com 19 Nov '15

19 Nov '15

Dear All, I'm trying to create a kickstart installer. I specified an option --byes-per-inode to 'logvol' command, but I got a message "No such option: --bytes-per-inode" during installation. Does anybody know a solution? The following is the lines for disk partitioning definition specified in my kickstart file. ------------------------- ## ## Disk partitioning information ## part /boot/efi --fstype="efi" --ondisk=sda --size=190 part /boot --fstype="xfs" --ondisk=sda --size=476 part pv.01 --fstype="lvmpv" --ondisk=sda --size=1 --grow volgroup centos --pesize=4096 pv.01 logvol swap --fstype="swap" --size=4096 --name=swap --vgname=centos logvol / --fstype="xfs" --size=9536 --name=root --vgname=centos logvol /var --fstype="xfs" --size=4768 --name=var --vgname=centos logvol /opt --fstype="xfs" --size=25600 --name=opt --vgname=centos logvol /data --fstype="xfs" --size=204800 --name=data --vgname=centos --bytes-per-inode=512 --grow ------------------------- Thank you for your kind support in advance. Best Regards, Mihoko ---- Mihoko Tanaka PA Information Products Sec. PAS Product Managent Dept. Systems Business Division IA Platform Business Headquarters YOKOGAWA Electric Corporation Tel: +81-(0)422-5603 (Ext. 35623) ----- CONFIDENTIAL: This e-mail may contain information that is confidential or otherwise protected from disclosure and intended only for the party to whom it is addressed. If you are not the intended recipient, please notify the sender by return and delete this e-mail. You are hereby formally advised that any unauthorized use, disclosure or copying of this email is strictly prohibited and may be unlawful.

2 2

OT: bareos
by m.roth＠5-cent.us 19 Nov '15

19 Nov '15

Hi, folks, I've got it set up, and it alleges that it's backing up Windows. However, when I try to run a restore for a Windows box, in bconsole, I say restore, then from most recent, then the client, and I want to select files. It builds its directory tree (it says), then tells me it's at c:/ (*Nix, not Win backslash)... and there's nothing there. The fileset stanza says to back up File = "c:/Users" Am I doing something wrong? Do I need a separate template stanza just for Windows? mark

2 2

Any idea how to install PDSH on CentOS 7?
by Julius Lerm 19 Nov '15

19 Nov '15

Does anyone have any idea how to install PDSH on CentOS 7? PDSH seems to be completely missing from EPEL now, for CentOS 7. Is there another repository available where we can get PDSH? Thanks, Julius

2 1

CentOS-announce Digest, Vol 129, Issue 9
by centos-announce-request＠centos.org 19 Nov '15

19 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2081 Moderate CentOS 6 postgresql Security Update (Johnny Hughes) 2. CESA-2015:2086 Important CentOS 6 java-1.6.0-openjdk Security Update (Johnny Hughes) 3. CESA-2015:2086 Important CentOS 5 java-1.6.0-openjdk Security Update (Johnny Hughes) 4. CESA-2015:2086 Important CentOS 7 java-1.6.0-openjdk Security Update (Johnny Hughes) 5. CESA-2015:2078 Moderate CentOS 7 postgresql Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 18 Nov 2015 19:45:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2081 Moderate CentOS 6 postgresql Security Update Message-ID: <20151118194504.GA29856(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2081 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2081.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0e97fe4a73fd3e52d253aa01a78d4a2c75e57415e62a2468dc8639352016e817 postgresql-8.4.20-4.el6_7.i686.rpm 54877c2fedcbdd30cc66941d449dc70077fc886fcac53e3d589e764452171354 postgresql-contrib-8.4.20-4.el6_7.i686.rpm 23992e58740882150065ac43e544b4f8aa53a942b9393e354faa7bf20411b4b4 postgresql-devel-8.4.20-4.el6_7.i686.rpm a4fc45d81815c93da5d5a3948eaba1f598937a0e6b80a7ced9de1958daa66158 postgresql-docs-8.4.20-4.el6_7.i686.rpm 217f335cc844426b53558859ae65f7e45b96e02ea2e3b267288f9404bbba9fd4 postgresql-libs-8.4.20-4.el6_7.i686.rpm 6e7534efb6c9eb1db98ec1e1e581a351cee2733f7d641decb390f6f60d448099 postgresql-plperl-8.4.20-4.el6_7.i686.rpm cc50decba345bf784b9821edb1c8f1921a708a4d9440f444ece54383c2bf005b postgresql-plpython-8.4.20-4.el6_7.i686.rpm b1d88b3f571a551d5438f3f397ecf79a1bbf45df822019160db4f22776e6a91e postgresql-pltcl-8.4.20-4.el6_7.i686.rpm 65e5d758024188f6ba096bc1c96754f45d6ce98944beddb9ecfa087dad9bf55f postgresql-server-8.4.20-4.el6_7.i686.rpm 9b4ddd7a4cf4ff7c24e91be92fa8062092e19672f3fb939817abd7d770eb9baa postgresql-test-8.4.20-4.el6_7.i686.rpm x86_64: 0e97fe4a73fd3e52d253aa01a78d4a2c75e57415e62a2468dc8639352016e817 postgresql-8.4.20-4.el6_7.i686.rpm 2cf6ecc14534ef1bb553da2743b1a2b7679ad6e076dd2301d241833c8288e02c postgresql-8.4.20-4.el6_7.x86_64.rpm 0cebe83b0f5f91d5055eec015539904d9d6c5c6e4a41848f0f39ddfebf54a082 postgresql-contrib-8.4.20-4.el6_7.x86_64.rpm 23992e58740882150065ac43e544b4f8aa53a942b9393e354faa7bf20411b4b4 postgresql-devel-8.4.20-4.el6_7.i686.rpm f02d225b9769f8a69c9a38bdc360e92b96d37b37db2c372ca020d597dea19dae postgresql-devel-8.4.20-4.el6_7.x86_64.rpm b001349770fb86984191de0d8a90d30d41dab95ca1467d8e31ef067cefd050b8 postgresql-docs-8.4.20-4.el6_7.x86_64.rpm 217f335cc844426b53558859ae65f7e45b96e02ea2e3b267288f9404bbba9fd4 postgresql-libs-8.4.20-4.el6_7.i686.rpm 252e3df351f8007191831d1c40b13e868811672d11c40a81fac17e3d213be926 postgresql-libs-8.4.20-4.el6_7.x86_64.rpm 54c0316956e115eb0c41c445a211675cff32f2628575765b368de7a735119350 postgresql-plperl-8.4.20-4.el6_7.x86_64.rpm 60e79f2a2d21dd3d8d8e1714ca063ecd5a2a302db824f9a735006c700bc351e7 postgresql-plpython-8.4.20-4.el6_7.x86_64.rpm ba395b85bb86749ddb58b1e43509412c684d0b18c7fe41052874073dafc926de postgresql-pltcl-8.4.20-4.el6_7.x86_64.rpm d189c260a6280f771eeed522750d4f7928fad095293fdd287f29b4dd2e8f6871 postgresql-server-8.4.20-4.el6_7.x86_64.rpm 77309a9e212b2f424990eae82510308ea036d9a40040162068be8b4f0a66a597 postgresql-test-8.4.20-4.el6_7.x86_64.rpm Source: b0eb57695234f5cc6f2ab2df3eef661726f065926a303cfa0278cc003ab24ed2 postgresql-8.4.20-4.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 18 Nov 2015 19:46:16 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2086 Important CentOS 6 java-1.6.0-openjdk Security Update Message-ID: <20151118194616.GA30144(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2086 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2086.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e8af0bccd304323e1aa843eb766e70c14e41f10d37f36a10a119a2e5a0a29d99 java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el6_7.i686.rpm 1d5d0435df46b38dd76625bf74d399130fc880d253cce65cc56af02ae95369f6 java-1.6.0-openjdk-demo-1.6.0.37-1.13.9.4.el6_7.i686.rpm a1fb61dd21d3c39e76dd4b586616a0eb9f0e7385f4ffc0646b64caab8e39e023 java-1.6.0-openjdk-devel-1.6.0.37-1.13.9.4.el6_7.i686.rpm e6ef8834495a00342c6795c6350e481121ec1679a11faf111974a8e1cfb513e9 java-1.6.0-openjdk-javadoc-1.6.0.37-1.13.9.4.el6_7.i686.rpm 8746d8d277b92216022f72bde731eb208376ef80189ff9b537b39818af6191a4 java-1.6.0-openjdk-src-1.6.0.37-1.13.9.4.el6_7.i686.rpm x86_64: 5aa22726ce93be62ff0833e0ff0a2258dd44b36968f9787c106ce7abac9de92b java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el6_7.x86_64.rpm 5fa7345e069a5d00c0257e1559ec8fe97a2f828306d5538a22c773f800c07181 java-1.6.0-openjdk-demo-1.6.0.37-1.13.9.4.el6_7.x86_64.rpm ed681b21bbcb93543dffc3f82ed8bd93226ad1cdd640d4300c3656630664bce6 java-1.6.0-openjdk-devel-1.6.0.37-1.13.9.4.el6_7.x86_64.rpm c83158d7a0c733b44279ccb95a66a87c137441e1a47c55be94d057e667289a23 java-1.6.0-openjdk-javadoc-1.6.0.37-1.13.9.4.el6_7.x86_64.rpm a248aefa9bc1c02541ff465f6eb6f98a32072b6fef348adcdf924fd051d06151 java-1.6.0-openjdk-src-1.6.0.37-1.13.9.4.el6_7.x86_64.rpm Source: 5d935ad8df489bd9c6dcf51e5fa0cdb2eda17face6eccce30cccf8fbfd0312f3 java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el6_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 18 Nov 2015 19:58:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2086 Important CentOS 5 java-1.6.0-openjdk Security Update Message-ID: <20151118195809.GA32688(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2086 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2086.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aa99f34b3c368695046b073a2065735f41b443f5014998662141472784808fc8 java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el5_11.i386.rpm 22a5e9945db46cbc09e28e944037f97e08ada786a29633fc0749c473bf27a75e java-1.6.0-openjdk-demo-1.6.0.37-1.13.9.4.el5_11.i386.rpm 1c74dc66b90779a55849b0f2857c99ed7c44d0e4071bfd0afec944d85df32e2b java-1.6.0-openjdk-devel-1.6.0.37-1.13.9.4.el5_11.i386.rpm 6fdbd6c9f8cf75a2e59755291275d4dd649ae80a723389495e5174eab93cdf20 java-1.6.0-openjdk-javadoc-1.6.0.37-1.13.9.4.el5_11.i386.rpm 9cb01c62fa3a3c13e33a88fe3e121d9e0509a3fe1aadf1b13a45067046eecf4e java-1.6.0-openjdk-src-1.6.0.37-1.13.9.4.el5_11.i386.rpm x86_64: 647faf2b65173da2df9cb57b1fc4c55605474eb675b8695551d6ea51f695213c java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el5_11.x86_64.rpm 1e99cb89adbd0b8331adbef47eab6911df5fb042481c004dc9e55978c828acf0 java-1.6.0-openjdk-demo-1.6.0.37-1.13.9.4.el5_11.x86_64.rpm df9c09dc2debaf5315d92f63a2516ba59f1b1a21cf9b8c1817beaa3b76f2f700 java-1.6.0-openjdk-devel-1.6.0.37-1.13.9.4.el5_11.x86_64.rpm e85105b2fe6f41629828fcae5f78bc62bd3b4d4b3e41a27f06c333799c3e74cf java-1.6.0-openjdk-javadoc-1.6.0.37-1.13.9.4.el5_11.x86_64.rpm 3a46d303cfaff3b86d43d157a039181542895f45d109c77bd0f81540f69a75e0 java-1.6.0-openjdk-src-1.6.0.37-1.13.9.4.el5_11.x86_64.rpm Source: 02ad1a69ec9a3b1832ec47ff1c4f13fcb54d45f55bf5d9907b6a582888b71bb8 java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 18 Nov 2015 20:38:46 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2086 Important CentOS 7 java-1.6.0-openjdk Security Update Message-ID: <20151118203846.GA41120(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2086 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2086.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: dbde32b3ea0f1870bd997de2978ae16c39b5702982e26641b1361e525d836a2a java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el7_1.x86_64.rpm 8c10f117b441e78024068c7d8aebdbe23ed46a772e739c2ec6c8fc5a9bd19300 java-1.6.0-openjdk-demo-1.6.0.37-1.13.9.4.el7_1.x86_64.rpm b9cc50e5cc098bd8cdec6d2c57ed9957b84b17140b20c4dff86116a321fb5743 java-1.6.0-openjdk-devel-1.6.0.37-1.13.9.4.el7_1.x86_64.rpm d7555996e4355cfd7f42227a7dcbc82760cb92dd0387c0e8943a62d58a96a85c java-1.6.0-openjdk-javadoc-1.6.0.37-1.13.9.4.el7_1.x86_64.rpm 242c990b1fb3bbbec7ae853077c9785752d1a11364241070004ed245a84fd564 java-1.6.0-openjdk-src-1.6.0.37-1.13.9.4.el7_1.x86_64.rpm Source: 5ca8bb4d945891ee068baac317351d7a571cf7dbf8e28f94fb1b2e2679580aeb java-1.6.0-openjdk-1.6.0.37-1.13.9.4.el7_1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Wed, 18 Nov 2015 20:39:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2078 Moderate CentOS 7 postgresql Security Update Message-ID: <20151118203901.GA41237(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2078 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2078.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: dac984ae0f6ec9bbb3fbf89ab18387c911ecd381d0d42502212090583a255fb0 postgresql-9.2.14-1.el7_1.i686.rpm 48c8a0de83c28f79cc1a85f1b6572560860563610721ee7700d7ada688d25b4e postgresql-9.2.14-1.el7_1.x86_64.rpm da0f25e0fa38d0fc93d6b3817797b67ed1f5130e49c91477b19f27bde73770f7 postgresql-contrib-9.2.14-1.el7_1.x86_64.rpm 4ff2972830681f8b3878fb465c3b0eb93e315645eb5f8d32d19f04b983f563a6 postgresql-devel-9.2.14-1.el7_1.i686.rpm eae197326a7ae78b9f633c718d0e7eb48f5ac3520fe5ff787ab07dfb9a23ab79 postgresql-devel-9.2.14-1.el7_1.x86_64.rpm efd8026ec5026a22471688e0c19b2a53657c8d9a3333770829dbc12234c46e1c postgresql-docs-9.2.14-1.el7_1.x86_64.rpm 3897ca7ab0e9ed9df4c81c3e15da0ba069b74bd59c2e9743755e3654d8b3b712 postgresql-libs-9.2.14-1.el7_1.i686.rpm 4a409cfde77bc7b14f18a152e896ad3290aef94355a8c9ee993e9075b05160e9 postgresql-libs-9.2.14-1.el7_1.x86_64.rpm 89f5050225e4bc4ca162822ed0bdd16a0cf34f0b70fd0b2b3422a5850d37556d postgresql-plperl-9.2.14-1.el7_1.x86_64.rpm 35868c84234ab8afe3fdc05b181463f2161e2785fe0f55d21ec5368eb556c7a6 postgresql-plpython-9.2.14-1.el7_1.x86_64.rpm 2598a7f5e6b3d9fa1354fd373c039d7eec38e980b60af005a0051096d5e845a6 postgresql-pltcl-9.2.14-1.el7_1.x86_64.rpm bd457b9b0838e97e8dc54e8d730ac75da3ab297623bebaae23ec249c9da32fb2 postgresql-server-9.2.14-1.el7_1.x86_64.rpm 59674923b6e61253f8442a75ad7b1b671af6d8f3d02fac54ee9d93402c357f0a postgresql-test-9.2.14-1.el7_1.x86_64.rpm 7e81ff716e88e95e0157c53a02d2050c4858cce6d8fd22ace50287f18c481789 postgresql-upgrade-9.2.14-1.el7_1.x86_64.rpm Source: 7e684cc6556afa15a60582354c7a110461946416b70332fe09bbb499bd6f0aec postgresql-9.2.14-1.el7_1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 129, Issue 9 ***********************************************

1 0

Running Fedora under CentOS via systemd-nspawn?
by Matt Garman 18 Nov '15

18 Nov '15

tl;dr - Is anybody "running" a Fedora system via systemd-nspawn under CentOS? Long version: Before CentOS 7, I used chroot to create "lightweight containers" where I could cleanly add extra repos and/or software without the risk of "polluting" my main system (and potentially ending up in dependency hell). The primary driver for this was MythTV, which has dozens of deps that span multiple repos. Without "containing" the MythTV installation within a chroot environment, I would inevitably lead to conflicts when doing a yum update. When I upgraded to CentOS 7, I found out that systemd-nspawn is "chroot on steroids". After figuring it all out, I replicated my MythTV "container", and things were great. Now I have a need for a particular piece of software: HandBrake. I found this site[1] that packages it for both Fedora and CentOS. But the CentOS version is a little older, as the latest HandBrake requires gtk3. The latest version is available for Fedora however. So I thought, what if I could "run" Fedora under systemd-nspawn. Well, I definitely *can* do it. I copied the base Fedora filesystem layout off the Live CD, then booted into it via systemd-nspawn. I was able to add repos (including the one for HandBrake), and actually install then run the HandBrake GUI. So while this does work, I'm wondering if it's safe? I'm thinking that at least some of the Fedora tools assume that they are running under a proper Fedora kernel, whereas in my scheme, they are running under a CentOS kernel. I'm sure there have been changes to the kernel API between the CentOS kernel and the Fedora kernel. Am I risking system stability by doing this? Anyone have any thoughts or experience doing something like this, i.e. running "foreign" Linux distros under CentOS via systemd-nspawn? What if I tried to do this with Debian or Arch or Gentoo? [1] http://negativo17.org/handbrake/

2 2

Re: [CentOS] Intel SSD
by m.roth＠5-cent.us 18 Nov '15

18 Nov '15

Michael Hennebry wrote: > On Wed, 18 Nov 2015, Birta Levente wrote: > >> I have a supermicro server, motherboard is with C612 chipset and beside that with LSI3108 raid controller integrated.Two Intel SSD DC S3710 200GB. OS: Centos 7.1 up to date. >> >> My problem is that the Intel SSD Data Center Tool (ISDCT) does not recognize the SSD drives when they connected to the standard S-ATA ports on the motherboard, but through the LSI raid controller is working. >> >> Does somebody know what could be the problem? <snip> > Perhaps the tool looks for the string RHEL. > My recollection is that when IBM PC's were fairly new, > IBM used that trick with some of its software. > To work around that, some open source developers used the string "not > IBM".I think this was pre-internet, so google might not work. > > If it's worth the effort, you might make another "CentOS" distribution, but call it "not RHEL". > I'll add to that: it was only maybe three years ago that to get one of Dell's support tools (Dset, maybe) to run on one of our CentOS boxes was to edit /etc/redhat-release so that it had the RH info, instead of saying CentosOS release ... You might try that. > -- > Michael hennebry(a)web.cs.ndsu.NoDak.edu > "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." That's never going to work - where the hell do you find a virgin? mark

2 1

centos 7 and keychain
by Pete Stieber 18 Nov '15

18 Nov '15

Is there a centos recommended repository for centos 7 where I can obtain the keychain package? TIA, Pete

3 3

firewalld rule syntax
by Nick Bright 17 Nov '15

17 Nov '15

I'm still learning firewalld obviously, and I am having trouble groking the documentation to understand how to do this. I know I could do an iptables direct, but that doesn't seem like the "right" way to do it. What I'm trying to do is allow a specific service, only for a specific ip. Effectively, SNMP should be allowed form a specific IP address (the systems monitor). What would be the most correct way of doing this? Create a zone for the snmp, then add the associated interface to that zone? firewall-cmd --zone=monitoring --add-source=1.2.3.4/32 firewall-cmd --zone=monitoring --add-service=snmp firewall-cmd --zone=monitoring --add-interface=ens192 firewall-cmd --runtime-to-permanent Would this be an appropriate approach? Is it the 'most correct' way? -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

3 4

Re: [CentOS] firewalld being stupid
by James B. Byrne 17 Nov '15

17 Nov '15

On Mon, November 16, 2015 16:39, Nick Bright wrote: > On 11/6/2015 3:58 PM, James Hogarth wrote: >> I have a couple of relevant articles you may be interested in ... >> >> On assigning the zone via NM: >> https://www.hogarthuk.com/?q=node/8 >> >> Look down to the "Specifying a particular firewall zone" bit ... >> remember that if you edit the files rather than using nmcli you must >> reload NM (or do nmcli reload) for that to take effect. >> >> If you specify a zone in NM then this will override the firewalld >> configuration if the zone is specified there. >> >> Here's some firewalld stuff: >> https://www.hogarthuk.com/?q=node/9 >> >> Don't forget that if you use --permanent on a command you need to do >> a >> reload for it to read the config from disk and apply it. > Thanks for the articles, they're informative. > > Here's what's really irritating me though. > > firewall-cmd --zone=internal --change-interface=ens224 --permanent > > ^^ This command results in NO ACTION TAKEN. The zone IS NOT CHANGED. > > firewall-cmd --zone=internal --change-interface=ens224 > > This command results in the zone of ens224 being changed to internal, > as > desired. Of course, this is not permanent. > > As such, firewall-cmd --reload (or a reboot, ect) will revert to the > public zone. To save the change, one must execute firewall-cmd > --runtime-to-permanent. > > This is very frustrating, and not obvious. If --permanent doesn't work > for a command, then it should give an error - not silently fail > without doing anything! > This behaviour is congruent with SELinux. One utility adjusts the permanent configuration, the one that will be applied at startup. Another changes the current running environment without altering the startup config. From a sysadmin point of view this is desirable since changes to a running system are often performed for empirical testing. Leaving ephemeral state changes permanently fixed in the startup config could, and almost certainly would eventually, lead to serious problem during a reboot. Likewise, immediately introducing a state change to a running system when reconfiguring system startup options is just begging for an operations incident report. It may not be intuitive to some but it is certainly the logical way of handling this. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

7 8

firewalld being stupid
by Nick Bright 17 Nov '15

17 Nov '15

Greetings, One of my biggest frustrations with CentOS 7 has been firewalld. Essentially all of the documentation just flat doesn't work. One common thing that needs to be done is to change the zone of an interface, however I've tried: firewall-cmd --permanent --zone=internal --change-interface=ens192 firewall-cmd --permanent --zone=internal --add-interface=ens192 I've also tried setting in /etc/sysconfig/network-scripts/ifcfg-ens192: ZONE=internal ZONE="internal" No matter what, when firewalld starts, ens192 will be in the public zone. What am I doing wrong? Why does the documented command structure not work? -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

8 9

CentOS-SCL python version
by Noam Bernstein 17 Nov '15

17 Nov '15

Hi - I’d like to use the CentOS-SCL python27 packages, but those appear to be rather out of date, still on 2.7.5. Is there any chance that there will be an update in the 2.7 track, to 2.7.10? thanks, Noam ----------------------------------------------------------- Noam Bernstein Center for Materials Physics and Technology Naval Research Laboratory Code 6390 noam.bernstein(a)nrl.navy.mil phone: 202 404 8628

2 2

Problems with CentOS Advisory from August 2014
by Ian Stirling 17 Nov '15

17 Nov '15

Regarding this announcement [CentOS-announce] CESA-2014:1008 Important CentOS 6 samba Security Update *Johnny Hughes* johnny at centos.org <mailto:centos-announce%40centos.org?Subject=Re:%20%5BCentOS-announce%5D%20CESA-2014%3A1008%20Important%20CentOS%206%20samba%20Security%0A%09Update&In-Reply-To=%3C20140805200929.GA57368%40n04.lon1.karan.org%3E> /Tue Aug 5 20:09:29 UTC 2014/ Talks about this upstream Redhat problem - https://rhn.redhat.com/errata/RHSA-2014-1008.html When you read that errata it talks about RHEL 7 and in fact the filesets mentioned in the CentOS announcement are for CentOS 7 which leaves us in a state of a CentOS 6 system trying to install CentOS 7 filesets (some examples) x86_64: 157af858bf13ec971678a8bf3fc6cb649d577e671edadf3c860723a87c736eab libsmbclient-4.1.1-37.*el7*_0.i686.rpm 90ea2064837184635e7d718b854ced1482b78514c35b26a75125242b342316c8 libsmbclient-4.1.1-37.*el7*_0.x86_64.rpm 8a02b8e75489ae6972d2dce9cdc641c303903e772913421ad5a0d18ba9b84ecc libsmbclient-devel-4.1.1-37.el7_0.i686.rpm 7fd666c9b7e9fcae08cfe87a1061de6f6bc70c1fe6f9e3b276e08281faaa74db libsmbclient-devel-4.1.1-37.el7_0.x86_64.rpm 6d227ef56d9c743db3ef6ca280232c92a7eac8b7ce831dd97d15eb34b4e456fc libwbclient-4.1.1-37.el7_0.i686.rpm 3b1c4905362c5bded2e3a6b700447adfa16c557a1bed8be96595598ff55f82a1 libwbclient-4.1.1-37.el7_0.x86_64.rpm -- Regards Ian

1 0

CentOS-announce Digest, Vol 129, Issue 8
by centos-announce-request＠centos.org 17 Nov '15

17 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:2065 Important CentOS 5 xen Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 16 Nov 2015 20:32:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2065 Important CentOS 5 xen Security Update Message-ID: <20151116203224.GA10162(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2065 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2065.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 388ec1332b1e2f675f67fdb8ad56c28811128e3c9e7f0093fd67b7180e12bf70 xen-3.0.3-147.el5_11.i386.rpm 3c8e64bff83246ab9f8e361c248f4e473096ad5d0213631738082ed9c6db5d4d xen-3.0.3-147.el5_11.i686.rpm b563a6f98a3c39f0a28ef6057e175c6d940e9c16f808877006803b6a6f1f83ca xen-devel-3.0.3-147.el5_11.i386.rpm 6ea1d0d1d4d9a76c7e9ab5c057a265fa162fec047d164ac818341e216dffa97c xen-devel-3.0.3-147.el5_11.i686.rpm 2469d3e25e7fe7135c69bcd43699b4ff5ea6e912ba1de5918c4041ec5b8ce223 xen-libs-3.0.3-147.el5_11.i386.rpm b3ee5a22722b9eca0d758746f85208abf66e05dcc30cbc38b20be3a12d8cbe8e xen-libs-3.0.3-147.el5_11.i686.rpm x86_64: 489c2f01bb31c69c37aea0ce5a681e4a9a979c453ba87671040f882307afb7f0 xen-3.0.3-147.el5_11.x86_64.rpm b563a6f98a3c39f0a28ef6057e175c6d940e9c16f808877006803b6a6f1f83ca xen-devel-3.0.3-147.el5_11.i386.rpm b71e966fd955b269897933773580ea8d37ba385a63545b323dd308b4063413b9 xen-devel-3.0.3-147.el5_11.x86_64.rpm 2469d3e25e7fe7135c69bcd43699b4ff5ea6e912ba1de5918c4041ec5b8ce223 xen-libs-3.0.3-147.el5_11.i386.rpm c111fe7960da5cbc37c8f0f4804f2b762aadde878099f72c38b4e04ab689995f xen-libs-3.0.3-147.el5_11.x86_64.rpm Source: 0e2ed9159d7d8a815c5483da3a802da4e05d229302f4446a6d5ce1915a22b669 xen-3.0.3-147.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 129, Issue 8 ***********************************************

1 0

FCGIWrapper
by Siva Prasad Nath 17 Nov '15

17 Nov '15

Hi, I am setting up my development environment. I am new to linux. I installed Apache on CentOS 7.0. I modified /etc/httpd/conf/httpd.conf and tried to restart Apache. I got the below error' AH00526: Syntax error on line 393 of /etc/httpd/conf/httpd.conf Wrapper /home/currencybooking/fcgi-bin/php5.fcgi cannot be accessed:...enied The line no 393 in /etc/httpd/conf/httpd.conf is FCGIWrapper /home/currencybooking/fcgi-bin/php5.fcgi .php Later I tried to install FCGIWrapper. [root@cbcdev mod_fastcgi-2.4.6]# make top_dir=/usr/lib64/httpd Makefile:12: /usr/lib64/httpd/build/special.mk: No such file or directory make: *** No rule to make target `/usr/lib64/httpd/build/special.mk'. Stop. I am not to able to build the package. Do I need to change the ownership if I copied file from production to Dev? Please help me. With regards, Shiva Shiva Prasad Nath 92981134

2 2

CentOS-SCL - php 5.6?
by Nick Bright 16 Nov '15

16 Nov '15

Is there any information available about what packages are being planned for the SCL? For example, will PHP 5.6 be made available & maintained? By "maintained" I mean kept up to date with back ported security patches and such. -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

3 2

About IPv6 Link-Local Address(CentOS5)
by 米山陽介 16 Nov '15

16 Nov '15

Hello Because I did not send , and then retransmitted. I am using the CentOS5.7. In a state where the link down, I did a ping to the IPv4 and IPv6. IPv4 succeeds in ping. but, IPv6 is ping fails. Once confirmed by ifconfig, it did not have a Link-Local Address. At link down, Is the Link-Local Address not set? Leave the link down, Is there a way to avoid this? # ethtool eth1 Settings for eth1: 〜 Link detected: no # ifconfig eth1 eth1 Link encap:Ethernet HWaddr 08:00:27:83:74:54 inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: 2000:8000:12:6:192:168:11:8/64 Scope:Global UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:786 errors:0 dropped:0 overruns:0 frame:0 TX packets:289 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:81093 (79.1 KiB) TX bytes:46507 (45.4 KiB) # ping 192.168.11.8 PING 192.168.11.8 (192.168.11.8) 56(84) bytes of data. 64 bytes from 192.168.11.8: icmp_seq=1 ttl=64 time=0.033 ms 64 bytes from 192.168.11.8: icmp_seq=2 ttl=64 time=0.019 ms 〜 # ping6 2000:8000:12:6:192:168:11:8 PING 2000:8000:12:6:192:168:11:8(2000:8000:12:6:192:168:11:8) 56 data bytes Thanks! -- ■□■□■□■□■□■□■□■□■□■□■□■ 株式会社デージーネットフロンティア開発部米山陽介 TEL: (052)709-7121 FAX: (052)709-7122 e-mail: komeyama(a)designet.co.jp URL: http://www.designet.co.jp ■□■□■□■□■□■□■□■□■□■□■□■

3 7

Error when installing mysql package
by Alexander Ni 16 Nov '15

16 Nov '15

Hi all, I have tried to install MySQL package but get next: [kim@forge tools]$ sudo yum install mysql [sudo] password for kim: Loaded plugins: fastestmirror, rhnplugin This system is receiving updates from RHN Classic or Red Hat Satellite. Loading mirror speeds from cached hostfile * base: cosmos.cites.illinois.edu * epel: mirrors.syringanetworks.net * extras: mirror.acsnet.com * rpmforge: mirror.team-cymru.org * updates: mirrors.usinternet.com Package mysql is obsoleted by mariadb, trying to install 1:mariadb-5.5.44-1.el7_1.x86_64 instead Resolving Dependencies --> Running transaction check ---> Package mariadb.x86_64 1:5.5.44-1.el7_1 will be installed --> Processing Dependency: mariadb-libs(x86-64) = 1:5.5.44-1.el7_1 for package: 1:mariadb-5.5.44-1.el7_1.x86_64 --> Running transaction check ---> Package mariadb-libs.x86_64 1:5.5.44-1.el7_1 will be installed Removing mariadb-libs.x86_64 1:5.5.44-1.el7_1 - u due to obsoletes from installed MySQL-shared-compat-5.5.44-1.el7.x86_64 --> Restarting Dependency Resolution with new changes. --> Running transaction check ---> Package mariadb-libs.x86_64 1:5.5.44-1.el7_1 will be installed --> Processing Dependency: mariadb-libs(x86-64) = 1:5.5.44-1.el7_1 for package: 1:mariadb-5.5.44-1.el7_1.x86_64 --> Finished Dependency Resolution Error: Package: 1:mariadb-5.5.44-1.el7_1.x86_64 (updates) Requires: mariadb-libs(x86-64) = 1:5.5.44-1.el7_1 Available: 1:mariadb-libs-5.5.37-1.el7_0.x86_64 (centos7-updates-x86_64) mariadb-libs(x86-64) = 1:5.5.37-1.el7_0 Available: 1:mariadb-libs-5.5.41-2.el7_0.x86_64 (base) mariadb-libs(x86-64) = 1:5.5.41-2.el7_0 Available: 1:mariadb-libs-5.5.44-1.el7_1.i686 (updates) ~mariadb-libs(x86-32) = 1:5.5.44-1.el7_1 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest [kim@forge tools]$ sudo yum install mysql --skip-broken Loaded plugins: fastestmirror, rhnplugin This system is receiving updates from RHN Classic or Red Hat Satellite. Loading mirror speeds from cached hostfile * base: cosmos.cites.illinois.edu * epel: mirrors.syringanetworks.net * extras: mirror.tocici.com * rpmforge: mirror.team-cymru.org * updates: mirrors.usinternet.com Package mysql is obsoleted by mariadb, trying to install 1:mariadb-5.5.44-1.el7_1.x86_64 instead Resolving Dependencies --> Running transaction check ---> Package mariadb.x86_64 1:5.5.44-1.el7_1 will be installed --> Processing Dependency: mariadb-libs(x86-64) = 1:5.5.44-1.el7_1 for package: 1:mariadb-5.5.44-1.el7_1.x86_64 --> Running transaction check ---> Package mariadb-libs.x86_64 1:5.5.44-1.el7_1 will be installed Removing mariadb-libs.x86_64 1:5.5.44-1.el7_1 - u due to obsoletes from installed MySQL-shared-compat-5.5.44-1.el7.x86_64 --> Restarting Dependency Resolution with new changes. --> Running transaction check ---> Package mariadb-libs.x86_64 1:5.5.44-1.el7_1 will be installed --> Processing Dependency: mariadb-libs(x86-64) = 1:5.5.44-1.el7_1 for package: 1:mariadb-5.5.44-1.el7_1.x86_64 Packages skipped because of dependency problems: 1:mariadb-5.5.44-1.el7_1.x86_64 from updates When I trying to install the mariandb it give particulary same error. Can somebody help to deal with this error? Best Regards, Alexander Ni

5 5

CentOS-announce Digest, Vol 129, Issue 7
by centos-announce-request＠centos.org 15 Nov '15

15 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:2025 CentOS 5 kernel BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Nov 2015 19:41:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:2025 CentOS 5 kernel BugFix Update Message-ID: <20151111194158.GA22322(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:2025 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-2025.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 887770aa4046fa2f6af649c22c12f61316e1382c5f2322d8217c5bae1f6e74cd kernel-2.6.18-407.el5.i686.rpm 077cc52dfd7b1048b2113f9b57294561b2aa6c396d236102f6b370365820182a kernel-debug-2.6.18-407.el5.i686.rpm c4fbd75c5eee98ebacf3a734982c6a0f4d270b594a03e68349bfda60d17faab6 kernel-debug-devel-2.6.18-407.el5.i686.rpm d720b06557dedb9d446ad44070b15317591af32ca3a9fa994a6a851fd74b9906 kernel-devel-2.6.18-407.el5.i686.rpm 928882e71d6eac010f5a24adb610a4896408ad655cd911d523985d0f3a8c7970 kernel-doc-2.6.18-407.el5.noarch.rpm 3d7fbf63fed6328af8b13c72902bb28c82325054f29cb7d5563261d2deaecf23 kernel-headers-2.6.18-407.el5.i386.rpm 01a18d1efd8b80502ae6c8db700a9778e12e211a07509f3e6e53e6a149b02baa kernel-PAE-2.6.18-407.el5.i686.rpm a0cf66b4bfa4c26b12fb2a61d9618298b7afb7d11ef6bbcad7a782844abbcfdd kernel-PAE-devel-2.6.18-407.el5.i686.rpm 9b853120d30a0c190573e309b08d7de6a98ef4b80f0a0da7b344d68eb5d8f87b kernel-xen-2.6.18-407.el5.i686.rpm d820bc62dddc6cbf3904023ae22158867bf51e28d342273beab69d757cfee01d kernel-xen-devel-2.6.18-407.el5.i686.rpm x86_64: f16ee14d40775c7a309b09c8f9feb406ea07d996ddc362e010d52ab00cfd2ac0 kernel-2.6.18-407.el5.x86_64.rpm 380e137458d82272c8b2579019bee46ebbd12c8fd4471f64120a93eee29059df kernel-debug-2.6.18-407.el5.x86_64.rpm e47d6f3764cabfdb6ab1468ef34db663f2eb1fc47cc2d0c4cbf93fcc8d483b49 kernel-debug-devel-2.6.18-407.el5.x86_64.rpm 9d6d0fda814a9f4b9d9fc9114ec5c996df9c74de28dd54f0416f10acb46b4651 kernel-devel-2.6.18-407.el5.x86_64.rpm 928882e71d6eac010f5a24adb610a4896408ad655cd911d523985d0f3a8c7970 kernel-doc-2.6.18-407.el5.noarch.rpm cabbcb6db7f8aa1d5314f3296222ac5305771d1e7e534385deb01c442610fd03 kernel-headers-2.6.18-407.el5.x86_64.rpm 49494290b6d1b8a3ec1350642b69d8c7e85a29c24b6fbe7c63729728d5221560 kernel-xen-2.6.18-407.el5.x86_64.rpm c3d17a1d6f9ae7f40f452141e43eecc4ff8fc698b3a392353a644d14f9f89cdc kernel-xen-devel-2.6.18-407.el5.x86_64.rpm Source: bbeccf0d9031a2205c8fcf2920db2380d977f4088fee15b489841056dec4001a kernel-2.6.18-407.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 129, Issue 7 ***********************************************

1 0

Rsync and differential Backups
by Alessandro Baggi 14 Nov '15

14 Nov '15

Hi list, how to perform a differential backup using rsync? On web there is a great confusion about diff backup concept when searched with rsync. Users says diff because it copy only differences. For me differential is backup from last full backup. Other users says that to perform a differential backup I must include in rsync command: --backup --backup-dir=/some/path but from manual page of rsync: ############# --backup-dir=DIR In combination with the --backup option, this tells rsync to store all backups in the specified directory on the receiving side. This can be used for incremental backups. You can additionally specify a backup suffix using the --suffix option (otherwise the files backed up in the specified directory will keep their original filenames). .... ################### Then at this point, I can perform a full backup copying base dir after last incremental. I can performa an incremental backup saving change on a specified destdir (using --backup-dir). How I can perform a diff backup? I know that rsync check differences using "the base dir". This dir have "the same content" of backupped source. To make incremental, this base is used. Supposing that I've 500 GB data on source. Make/sync the base-dir of 500GB. Running a full backup (the result file must be a fullbackup.tar.gz), at the end of the process I get a base-dir of 500GB and a .tar.gz of +/- 500GB compressed. Is correct make full backup, performing first an incremental backup on the base-dir and then compress it on a .tar.gz? Or is better resync all source in alternative destdir? In this example I've spent the double space for a full and a base-dir. 500GB Source vs 1TB for base-dir and a full.tar.gz. There is a way to performs other operation (incr and diff) without using the base and save disk space? Thanks in advance.

18 45

Fwd: After installation
by Siva Prasad Nath 14 Nov '15

14 Nov '15

---------- Forwarded message ---------- From: *Siva Prasad Nath* <shivaprasadnath21(a)gmail.com> Date: Saturday, November 14, 2015 Subject: After installation To: centos-devel(a)centos.org Hi, I installed Centos. After login as root I can see the config file. Please advice me about the next step. With regards, Shiva -- Shiva Prasad Nath 92981134 -- Shiva Prasad Nath 92981134

3 4

Differences from upstream RHEL
by Edward Ned Harvey (centos) 13 Nov '15

13 Nov '15

At work, we use some commercial software, that names RHEL6 as a supported OS, but not Centos6. I would like to know the difference between Centos and RHEL, in order to claim (or not) that we can support our users on Centos instead of RHEL. I see the release notes, that say "Packages modified by CentOS," but it's not clear what the modifications are. I have been browsing around for these details, and have not yet found specifics of *what* was modified in those packages. Can anyone please direct me toward details of what's modified in the packages that centos modifies?

7 11

CentOS-announce Digest, Vol 129, Issue 6
by centos-announce-request＠centos.org 13 Nov '15

13 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Announcing release for Ruby 1.9.3, 2.0.0, 2.2 and Ruby on Rails 3.2, 4.0, 4.1 on CentOS Linux 7 x86_64 SCL (Honza Horak) ---------------------------------------------------------------------- Message: 1 Date: Thu, 12 Nov 2015 18:33:11 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Ruby 1.9.3, 2.0.0, 2.2 and Ruby on Rails 3.2, 4.0, 4.1 on CentOS Linux 7 x86_64 SCL Message-ID: <5644CD57.3090401(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Ruby in versions 1.9.3, 2.0.0, and 2.2, and Ruby on Rails in versions 3.2, 4.0 and 4.1 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of Ruby 2.2 and Ruby on Rails 4.1, for others use particular collection names instead): $ sudo yum install centos-release-scl $ sudo yum install rh-ruby22 rh-ror41 $ scl enable rh-ruby22 bash At this point you should be able to use ruby just as a normal application. An examples of commands run might be: $ ruby my-app.rb $ gem install activeresource $ bundle In order to view the individual components included in this collection, including additional rubygems plugins, you can run: $ sudo yum list rh-ruby22\* rh-ror41\* The rh-ror41 collection relies on the rh-ruby22 collection and the ror40 collection relies on the ruby200 collection, so the Ruby collections will be also installed when the Ruby on Rails collection is installed. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-ruby22 delivers bundler and Ruby interpreter in version 2.2, while the collection rh-ror41 delivers Ruby on Rails framework in version 4.1 that allows to create and run applications in Ruby or Ruby on Rails framework. The collection ruby200 delivers only the Ruby interpreter in version 2.0.0, while the ror40 collection delivers Ruby on Rails framework in versoin 4.0 and bundler. The collection ruby193 delivers Ruby interpreter in version 1.9.3, bundler and Ruby on Rails framework in version 3.2. Some of the most common rubygems are also included in the collections as RPMs, the rest may be installed using bundler or gem tools. For more on the Ruby and Ruby on Rails, see https://www.ruby-lang.org, http://rubyonrails.org or https://rubygems.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Ruby and Ruby on Rails collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 129, Issue 6 ***********************************************

1 0

Fresh installation using usb
by Siva Prasad Nath 13 Nov '15

13 Nov '15

Hi, I am trying to install Centos 7 on Dell poweredge server. It prompts i8042 controller not found. After that screen was not moving. With regards, Shiva -- Shiva Prasad Nath 92981134

3 4

MariaDB 10.X Master-Slave Replication
by melkor.kp 13 Nov '15

13 Nov '15

Hi, I am configuring master-slave replication in a MariaDB 10.X over Centos 7.1 and I am having some troubles. When I configure the slave I use the following directies in my.cnf: ... master-host = 192.168.122.2 master-user = slave_user master-password = qwerty master-connect-retry = 60 ... But is seems that the daemon doesn't like them and it refuses to start. Does anybody know if those directives have been removed on that version? Setting up them with the following mysql commands inside works. mysql> slave stop; mysql> CHANGE MASTER TO MASTER_HOST='*192.168.122.2*', MASTER_USER='*slave_user*', MASTER_PASSWORD='*qwerty*', MASTER_LOG_FILE='*mysql-bin.000003*', MASTER_LOG_POS=*11128001*; mysql> slave start; mysql> show slave status\G; Cheers, Roberto Nebot -- It's a dangerous business, Frodo, going out your door. You step onto the road, and if you don't keep your feet, there's no knowing where you might be swept off to. Bilbo Baggins. http://vanishedintheshell.apsila.org <http://vanishedintheshell.blogspot.com>

2 1

Shorewall and the latest kernel problem
by Pete Geenhuizen 12 Nov '15

12 Nov '15

I just installed the latest kernel 2.6.32-573.8.1.el6.x86_64 and when I rebooted it shorewall (shorewall-4.5.4-1.el6.noarch) failed with the following error ERROR: a non-empty masq file requires NAT in your kernel and iptables /etc/shorewall/masq (line 15) Question is is this a problem in the kernel or is it a problem in Shorewall? Booting the previous kernel allowed shorewall to start normally. Any one else seen this error, if so what's the fix? Any help would be greatly appreciated. Pete -- If money can fix it, it's not a problem. -- Click and Clack the Tappet brothers

3 3

CentOS-announce Digest, Vol 129, Issue 5
by centos-announce-request＠centos.org 12 Nov '15

12 Nov '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Announcing release for Vagrant 1.7.4 on CentOS Linux 7 x86_64 SCL (Honza Horak) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Nov 2015 18:10:30 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Vagrant 1.7.4 on CentOS Linux 7 x86_64 SCL Message-ID: <56437686.6090009(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Vagrant 1.7.4 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install sclo-vagrant1 $ scl enable sclo-vagrant1 bash At this point you should be able to use vagrant just as a normal application. An example work-flow might be: $ vagrant init centos/7 $ vagrant up $ vagrant ssh In order to view the individual components included in this collection, including additional vagrant plugins, you can run : $ sudo yum list sclo-vagrant\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection sclo-vagrant1 delivers a Vagrant tool in version 1.x that allows to create and configure virtual development environments. Some of the most common plugins are also included in the collection as RPMs. The sclo-vagrant1 collection relies on the following additional collections which will also be installed: rh-ruby22, rh-ror41 For more on the Vagrant tool and other plugins, see https://www.vagrantup.com. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Vagrant collection being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Ruby, NodeJS, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org/ You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 129, Issue 5 ***********************************************

1 0

Samsung evo 840 fixes
by Christer Solskogen 11 Nov '15

11 Nov '15

Queued TRIM seems to be a problem with this kind of drive (with the latest firmware), and a "recent" kernel (4.1.x) seems to have this fixed this without disabling NCQ completely. Is that patch backported to the "mainline" CentOS 6 or CentOS7 kernel? -- chs

4 7

OT: bacula question
by m.roth＠5-cent.us 10 Nov '15

10 Nov '15

Hi, folks, Question, for those that use/have used bacula: I've been setting up backups for one team, the server on CentOS 6, but they're on Windows. If we install the director on Windows, is it possible for the users to restore files from the server to their own machine? mark

4 9

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss