- Discuss - lists.centos.org

Re: [CentOS] Booting back into CentOS-6
by philburt stortsky 29 May '15

29 May '15

This, IMHO, is one of the more annoying bugs with the newer GRUB (which i assume is the bootloader you are using). Specifically the newer grub can't, won't boot from a drive other than the one grub is on. suggest you revert to grub 0.97 or, if any boot loader is or can be put on the drive with the 6.5 distro you can make that drive the boot drive in the bios, which is how i do it. i.e. i just put grub on any drive i might want to boot from and install etc. with the drive i want to be able to boot to set as the boot drive in the bios. of course, depending on how you are mounting drives this may break links etc. since the bios will have different names for the drives due to the different order of the boot media list in the bios. hope that helps, it is highly annoying. "We kill when we close our eyes to poverty, affliction or infamy. We kill when, because it is easier, we countenance or pretend to approve of atrophied social, political, educational and religious institutions instead of resolutely combating them." - Hesse > Message: 13 > Date: Fri, 29 May 2015 02:23:44 +0100 > From: Timothy Murphy <gayleard(a)eircom.net> > To: centos(a)centos.org > Subject: [CentOS] Booting back into CentOS-6 > Message-ID: <mk8f30$lf1$1(a)ger.gmane.org> > Content-Type: text/plain; charset="ISO-8859-1" > > I'm currently running CentOS-7, > but I'd like to re-boot into CentOS-6.5 > which I have on another partition. > Although this OS is in the grub list when I boot, > if I try to run it I get a segfault. > I guess this is something to do with the change from grub to grub2? > > In any case, I'm wondering if there is any simple way > of booting into both CentOS-6 and CentOS-7? > > -- > Timothy Murphy > gayleard /at/ eircom.net > School of Mathematics, Trinity College, Dublin > > > > > ------------------------------ > > Message: 14 > Date: Fri, 29 May 2015 02:52:53 +0100 > From: Timothy Murphy <gayleard(a)eircom.net> > To: centos(a)centos.org > Subject: [CentOS] Using Mariadb databases from old server > Message-ID: <mk8gpm$ea1$1(a)ger.gmane.org> > Content-Type: text/plain; charset="ISO-8859-1" > > I'm running CentOS-7, but I left some MySQL databases > on my old CentOS-6.5 partition which I'd like to retrieve. > I assume they are contained in the file /var/lib/mysql/ibdata1 ? > > Could I just copy this file to /var/lib/mysql in CentOS-7? > Or is there some way Mariadb or phpMyAdmin can import mysql databases > from a server that is no longer running? > > -- > Timothy Murphy > gayleard /at/ eircom.net > School of Mathematics, Trinity College, Dublin > > > > > ------------------------------ > > Message: 15 > Date: Thu, 28 May 2015 19:55:41 -0700 > From: Gordon Messmer <gordon.messmer(a)gmail.com> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] New controller card issues > Message-ID: <5567D52D.5060108(a)gmail.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > On 05/28/2015 03:02 PM, Valeri Galtsev wrote: > > > > If I get you correctly you are saying that 3ware RAID cards are prone to > > hardware failures - as opposed to software RAID which is not (as it does > > not include hardware, so never has a hardware failures), right? No this is > > a joke of course. But it's the one one asked for ;-) > > Software RAID uses whatever controller the disks are connected to. > Often, that's the AHCI controller on the motherboard. And those > controllers are almost always more reliable than 3ware. Seriously. No > joke. > > > Again, I don't know your statistics: i.e. how many did you use, > > Hundreds of systems, both with 3ware and with software RAID. > > > how many > > of them died (failed as hardware). > > Not many, but some. A handful of data corruption cases (maybe 5? I > don't have logs). One BBU failure that resulted in a system that > wouldn't boot until it was removed (and a couple of hours down time > while 3ware techs worked that ticket). A couple of times when we really > wanted to move an array of disks and couldn't. > > Vs zero reliability issues with software RAID. > > > How well surge-free the power is. > > We always used trusted UPS hardware. > > > How > > well the guys who installed your cards into your boxes followed static > > discharge precautions > > Our systems were built by a professional VAR. Employees always wore > ground straps. There were other anti-static measures in place as well. > I had been to the facility. > > And I'll throw you a curveball: > > I've argued that software RAID is more reliable than 3ware cards, > specifically. In the world of ZFS and btrfs, you absolutely should not > use hardware RAID. As you mentioned earlier, hardware RAID volumes > should scan disks regularly. However, scanning only tells you if disks > have bad sectors. It can also detect data (parity) errors, but it can't > repair them. Hardware RAID cards don't have information that can tell > them which sectors are correct. ZFS and btrfs, on the other hand, > checksum their data and metadata. They can tell which sectors are > damaged in the case of corruption such as bit flips, and which sector > should be used to repair the data. > > Now, btrfs and ZFS are completely different from software RAID. I'm not > comparing the two. But hardware RAID simply has too many deficiencies > to justify its continued use. It should go away. > > > ------------------------------ > > Message: 16 > Date: Thu, 28 May 2015 21:22:45 -0700 > From: Keith Keller <kkeller(a)wombat.san-francisco.ca.us> > To: centos(a)centos.org > Subject: Re: [CentOS] New controller card issues > Message-ID: <l56l3cxekb.ln2(a)goaway.wombat.san-francisco.ca.us> > Content-Type: text/plain; charset=us-ascii > > On 2015-05-28, Valeri Galtsev <galtsev(a)kicp.uchicago.edu> wrote: > > > > I do use both LSI and 3ware. > > Both are now owned by Avago. (Not sure when that happened, last I > looked LSI was its own company.) > > > For me big advantage of 3ware is transparent > > interface. By which I mean web interface. There is command line interface > > for both and 3ware command line interface may be less confusing for me. > > I find the 3ware CLI a little clunky but easy to understand. I find the > LSI CLIs (both MegaCLI and storcli) incredibly confusing, and the GUI > interface is not intuitive (and I think doesn't expose all the > information about the controller; the Nagios LSI plugin found errors > that I could find no trace of in the GUI). > > > Sorry for long comment. I did feel 3ware deserves more respect than one > > might draw from this thread otherwise. > > Agreed; I'll share some of my experiences in another post. > > --keith > > -- > kkeller(a)wombat.san-francisco.ca.us > > > > > ------------------------------ > > Message: 17 > Date: Thu, 28 May 2015 21:36:31 -0700 > From: Keith Keller <kkeller(a)wombat.san-francisco.ca.us> > To: centos(a)centos.org > Subject: Re: [CentOS] New controller card issues > Message-ID: <fv6l3cx8ub.ln2(a)goaway.wombat.san-francisco.ca.us> > Content-Type: text/plain; charset=us-ascii > > On 2015-05-28, Valeri Galtsev <galtsev(a)kicp.uchicago.edu> wrote: > > > > Now, seriously: of more than a couple of dozens of cards I used during > > last about 13 years not a single one died on me. > > I have had a couple dozen hardware RAID controllers over the years. I > have not had the success you've had, but I've had very few hard > failures. I have had one data loss event, where a bad BBU was causing > problems with an old controller (of course I had backups, as should > everyone). I've had two other controllers just die, but replacing it > was easy, and the new controller recognized the arrays immediately. > This includes moving two different disk arrays from two different 9650s > to two different 9750s, so whoever wrote that arrays are not compatible > across different models is at least partly incorrect. > > I do also have an LSI controller, which has been fine, but it's only one > controller so it's not enough data points to draw any conclusions. I also > have an md RAID array (on a very old 3ware controller which doesn't > support RAID6), and it's also been fine. It hasn't suffered through any > major catastrophes, though I do think it's had one or two fatal kernel > panics, and once or twice had a hard reset done. It's still fine even > with a small number of really crappy "green" drives still in the array > (I learned that lesson the hard way--don't use green drives with a hardware > RAID controller!). > > --keith > > -- > kkeller(a)wombat.san-francisco.ca.us > > > > > ------------------------------ > > Message: 18 > Date: Fri, 29 May 2015 08:32:47 +0300 > From: Todor Petkov <zakk(a)online.bg> > To: CentOS mailing list <centos(a)centos.org> > Cc: Timothy Murphy <gayleard(a)eircom.net> > Subject: Re: [CentOS] Using Mariadb databases from old server > Message-ID: <62128b8c308448402a65c2b760d4d88c(a)online.bg> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > On 29/05/2015 04:52 AM, Timothy Murphy wrote: > > I'm running CentOS-7, but I left some MySQL databases > > on my old CentOS-6.5 partition which I'd like to retrieve. > > I assume they are contained in the file /var/lib/mysql/ibdata1 ? > > > > Could I just copy this file to /var/lib/mysql in CentOS-7? > > Or is there some way Mariadb or phpMyAdmin can import mysql databases > > from a server that is no longer running? > > The C6 partition is part of the new server, so you are able to mount it > and copy files from it, is this correct? Have you done something with > the MariaDB or it's still clean installation? > > > > ------------------------------ > > Message: 19 > Date: Fri, 29 May 2015 09:45:24 +0200 > From: G?tz Reinicke - IT Koordinator <goetz.reinicke(a)filmakademie.de> > To: CentOS <centos(a)centos.org> > Subject: [CentOS] NSS Tools certutil buggy ? Centos 6 nss-tools-3.18.0 > Message-ID: <55681914.1040504(a)filmakademie.de> > Content-Type: text/plain; charset="utf-8" > > Hi, > > I try to add a certificate to a fresh certificate db, but the trust > attributes are not set as expected. Neither can I change tham. > > The cert/pem is valid and double checked :) > > > Any idea/suggestion? > > > certutil -N -d certdb-test > > certutil -A -n "foobar" -t "u,u,u" -d certdb-test/ -i foobar.pem > > certutil -L -d certdb-test/ > > > Certificate Nickname Trust Attributes > SSL,S/MIME,JAR/XPI > foobar ,, > > > > certutil -M -n "foobar" -t "u,u,u" -d /tmp/certdb-test/ > > > certutil -L -d certdb-test/ > > Certificate Nickname Trust Attributes > SSL,S/MIME,JAR/XPI > foobar ,, > > > > > > Thanks and regards . G?tz > > -- > G?tz Reinicke > IT-Koordinator > > Tel. +49 7141 969 82 420 > E-Mail goetz.reinicke(a)filmakademie.de > > Filmakademie Baden-W?rttemberg GmbH > Akademiehof 10 > 71638 Ludwigsburg > www.filmakademie.de > > Eintragung Amtsgericht Stuttgart HRB 205016 > > Vorsitzender des Aufsichtsrats: J?rgen Walter MdL > Staatssekret?r im Ministerium f?r Wissenschaft, > Forschung und Kunst Baden-W?rttemberg > > Gesch?ftsf?hrer: Prof. Thomas Schadt > > > ------------------------------ > > Message: 20 > Date: Fri, 29 May 2015 12:00:07 +0100 > From: Timothy Murphy <gayleard(a)eircom.net> > To: centos(a)centos.org > Subject: Re: [CentOS] Using Mariadb databases from old server > Message-ID: <mk9gro$pq3$1(a)ger.gmane.org> > Content-Type: text/plain; charset="ISO-8859-1" > > Todor Petkov wrote: > > >> I'm running CentOS-7, but I left some MySQL databases > >> on my old CentOS-6.5 partition which I'd like to retrieve. > >> I assume they are contained in the file /var/lib/mysql/ibdata1 ? > >> > >> Could I just copy this file to /var/lib/mysql in CentOS-7? > >> Or is there some way Mariadb or phpMyAdmin can import mysql databases > >> from a server that is no longer running? > > > > The C6 partition is part of the new server, so you are able to mount it > > and copy files from it, is this correct? Have you done something with > > the MariaDB or it's still clean installation? > > I did add something to Mariadb on the new CentOS-7 system, > but I don't mind deleting it and starting again. > I can mount the partition with the old mysql files on it. > Could I just copy the contents of /mnt/var/lib/mysql > to the new system? > There are files with the same name, eg ibdata1, on both systems. > Could I have an ibdata2 ? > > Any suggestions gratefully received. > > -- > Timothy Murphy > gayleard /at/ eircom.net > School of Mathematics, Trinity College, Dublin > > > > > ------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > > > End of CentOS Digest, Vol 124, Issue 29 > *************************************** >

1 0

NSS Tools certutil buggy ? Centos 6 nss-tools-3.18.0
by Götz Reinicke - IT Koordinator 29 May '15

29 May '15

Hi, I try to add a certificate to a fresh certificate db, but the trust attributes are not set as expected. Neither can I change tham. The cert/pem is valid and double checked :) Any idea/suggestion? certutil -N -d certdb-test certutil -A -n "foobar" -t "u,u,u" -d certdb-test/ -i foobar.pem certutil -L -d certdb-test/ Certificate Nickname Trust Attributes SSL,S/MIME,JAR/XPI foobar ,, certutil -M -n "foobar" -t "u,u,u" -d /tmp/certdb-test/ certutil -L -d certdb-test/ Certificate Nickname Trust Attributes SSL,S/MIME,JAR/XPI foobar ,, Thanks and regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

1 0

New controller card issues
by m.roth＠5-cent.us 29 May '15

29 May '15

Running CentOS 5 (long story, will be updated some day). A 5 yr old Dell PE R415. Whoever spec'd the order, they got the cheapest, embedded controller. Push came to shove - these things gag on a drive > 2TB. So, we bought some PERC H200's for it, and its two mates. This morning, I brought the system down, and put in the card, and moved the SATA cables. This did not end well. The new card seemed to see the drives, it loaded the initrd... and kernel panic'd every time when it went to switch root. I went into the card's firmware and set the first drive to boot. No change. Upshot was that I actually had to pull the card - once it was in, and set, it insisted that it was 0 in boot order, and would not let me take it out, even though I'd reconnected the SATA connector to the on-board one. So: my manager and I are suspecting that the initrd simply doesn't have the driver for the card. I'm going to rebuild the initrd (once I figure out how to do that without the card in the box). The reason I'm posting is to ask y'all if anyone out there has some *other* thoughts as to what the problem might be, other than the initrd. Thanks in advance. mark

6 14

Openssl C6 distro tag different from upstream
by Leonard den Ottolander 28 May '15

28 May '15

Hi, Just noticed that the distro tag used in openssl is different from upstream. Upstream and the last update (openssl-1.0.1e-30.el6_6.7) use "el6_6" where as the latest update (openssl-1.0.1e-30.el6.8) uses "el_6". Any reason for this discrepancy? Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

3 3

CentOS-announce Digest, Vol 123, Issue 10
by centos-announce-request＠centos.org 28 May '15

28 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2015:1029 CentOS 6 tg3 Enhancement Update (Johnny Hughes) 2. CEBA-2015:1032 CentOS 5 pam BugFix Update (Johnny Hughes) 3. CentOS-7 beta candidate for AArch64 platforms (Jim Perrin) 4. CEBA-2015:1033 CentOS 6 glibc BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 27 May 2015 12:37:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2015:1029 CentOS 6 tg3 Enhancement Update Message-ID: <20150527123717.GA61453(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2015:1029 Upstream details at : https://rhn.redhat.com/errata/RHEA-2015-1029.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5dff711b2e373e9659765e628fc5ba969313021fc81608078af40dad90442a5f kmod-tg3-3.137-2.el6_6.i686.rpm x86_64: 3dc5c70e00006a0188efa931a453a0a8d6eaba50032abf7f3cfec428842099bd kmod-tg3-3.137-2.el6_6.x86_64.rpm Source: 532e79131f1bef630ec4607b1d05b6c21d8addc979eea37eca318de4786cf416 tg3-3.137-2.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 27 May 2015 14:35:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1032 CentOS 5 pam BugFix Update Message-ID: <20150527143501.GA26646(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1032 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1032.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: abdd6996f2976fec625db70ade1ae4693196f67105b688feaad382d3ac17ae60 pam-0.99.6.2-14.el5_11.i386.rpm 784578b99de9d56f32a49325896d046321feafdcc9fd0d7c417ecfbdca3cfafd pam-devel-0.99.6.2-14.el5_11.i386.rpm x86_64: abdd6996f2976fec625db70ade1ae4693196f67105b688feaad382d3ac17ae60 pam-0.99.6.2-14.el5_11.i386.rpm 5e2d0e23ae1e63ac116ae0b96f3d8b523d9f035dcae03b0a5670374842e2579d pam-0.99.6.2-14.el5_11.x86_64.rpm 784578b99de9d56f32a49325896d046321feafdcc9fd0d7c417ecfbdca3cfafd pam-devel-0.99.6.2-14.el5_11.i386.rpm 22d657e3ee8612afc3d75582e1717013582cd03690258f58303fabfb459c28aa pam-devel-0.99.6.2-14.el5_11.x86_64.rpm Source: 1d0d664b4815216f0df166264bf5d5adb15bffcbb8d7cd207e63af168a5c3edb pam-0.99.6.2-14.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 27 May 2015 11:20:19 -0500 From: Jim Perrin <jperrin(a)centos.org> To: centos-announce(a)centos.org, arm-dev(a)centos.org Subject: [CentOS-announce] CentOS-7 beta candidate for AArch64 platforms Message-ID: <5565EEC3.7010905(a)centos.org> Content-Type: text/plain; charset=utf-8 We are pleased to announce the public beta release of CentOS Linux 7 for AArch64 compatible hardware. We've addressed a number of issues discovered from the previous 2 weeks of alpha testing, and feel that the release is stable enough to transition to beta. Improvements from Alpha ======================= Improved package selection: A number of additional packages have been added, including libreoffice, evolution, abrt, and more. Updated kernel: Some non-fatal kernel errors have been address by moving to a 4.1rc based kernel version. This also adds ACPI functionality to the platform. Improved Group selection: The installer now offers a larger group selection from the previous minimal-only install. Installation ============ Installation guides and documentation will be provided via the CentOS wiki, at http://wiki.centos.org/SpecialInterestGroup/AltArch/AArch64 Download ======== The full (unsigned) install tree is available at http://buildlogs.centos.org/centos/7/os/aarch64/ ============ Contributing The AArch64 effort is meant to be a community effort as part of the AltArch SIG (http://wiki.centos.org/SpecialInterestGroup/AltArch) and we welcome enthusiasts and vendors to contribute patches, fixes, documentation, etc. In the AArch64 Extras repository, we have provided the mock package and dependencies so that community members can more easily contribute, as well as testing their own builds locally. Please submit patches, fixes, etc to the Arm-Dev list (http://lists.centos.org/mailman/listinfo/arm-dev) for discussion and acceptance. We encourage vendors to come and join this effort, we have a loose organization focused on the alternative architectures build process and welcome interaction at the group level. Please get in touch with me (jperrin(a)centos.org) or K Singh ( kbsingh(a)centos.org ) to find out more details. The wider CentOS Ecosystem is also welcome to engage with us, both at the project and code level. If you are working with a project that interfaces, manages or develops on top of CentOS, specially in the virtualization, cloud, container and infrastructure management areas - we would love to have you guys get involved. While we don't have a lot of resources, we are working with a few vendors to build up a community resource pool that we would encourage other projects to share their development, testing and delivery around CentOS Linux for aarch64. -- Jim Perrin The CentOS Project | http://www.centos.org twitter: @BitIntegrity | GPG Key: FA09AD77 ------------------------------ Message: 4 Date: Wed, 27 May 2015 15:14:06 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1033 CentOS 6 glibc BugFix Update Message-ID: <20150527151406.GA14300(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1033 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1033.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a193dd5a810304800b3c6c8c6ebe9cf7c812405c2c90c91a8d5e2f55c2808259 glibc-2.12-1.149.el6_6.9.i686.rpm a49df2dc9eb6106ed952593c72b1454e26eca771c68c659b426f458c3efb7a7b glibc-common-2.12-1.149.el6_6.9.i686.rpm f7c136221d3f6fb8d4c25ba4c1e4e49f052529608b350e29e5b2863275f29b33 glibc-devel-2.12-1.149.el6_6.9.i686.rpm afca31eff6e38e5a7b95e8737be5baff927d5b70b20bd93751148befa2745b02 glibc-headers-2.12-1.149.el6_6.9.i686.rpm 8ff405369f9bbc106364df0b169337c677fedcc1a501b8a92c86c9b9fb21fb14 glibc-static-2.12-1.149.el6_6.9.i686.rpm 70ddf8e976e4a4721ccfced10c5d1e07858afcb04b2fb00198c7641135daa295 glibc-utils-2.12-1.149.el6_6.9.i686.rpm 1c395ae1da4e73c7d60dc3ff4b372ea6d881d8102a15bb76f127a4ffea367cf2 nscd-2.12-1.149.el6_6.9.i686.rpm x86_64: a193dd5a810304800b3c6c8c6ebe9cf7c812405c2c90c91a8d5e2f55c2808259 glibc-2.12-1.149.el6_6.9.i686.rpm 712f9c468fa39edcb974433852db80d5cb6ce6cacb6d24f2050c04de62c834e3 glibc-2.12-1.149.el6_6.9.x86_64.rpm 62c09f50b6bb09105f34733e0ddf68f7313925c08b736e364fb4f9ee3ff6e137 glibc-common-2.12-1.149.el6_6.9.x86_64.rpm f7c136221d3f6fb8d4c25ba4c1e4e49f052529608b350e29e5b2863275f29b33 glibc-devel-2.12-1.149.el6_6.9.i686.rpm 3705c8079805449b4a01aa97aa6a7d8f467fedbf2ac88e5e9c3d58ebf15fc23e glibc-devel-2.12-1.149.el6_6.9.x86_64.rpm 9910a446ca5782bf4c8745abe63357ab368b6d36d8723a4ce978fec49064262d glibc-headers-2.12-1.149.el6_6.9.x86_64.rpm 8ff405369f9bbc106364df0b169337c677fedcc1a501b8a92c86c9b9fb21fb14 glibc-static-2.12-1.149.el6_6.9.i686.rpm ef0c6146fc033accef8e61c4821114d264db034643a254e2d2676b89f80f2cbf glibc-static-2.12-1.149.el6_6.9.x86_64.rpm 097fea253a97bdfc5bbf1114986cedfd24cc1bd3548c206b3986ee96175fad26 glibc-utils-2.12-1.149.el6_6.9.x86_64.rpm 74af55bb1cca30aa6e682230be1db3f6478cf8d0eff46b89e14ab93bdd4edd9a nscd-2.12-1.149.el6_6.9.x86_64.rpm Source: 707d103e880ad41fb7996eaa7f74575c942601b85cbbbec47363384619e1e869 glibc-2.12-1.149.el6_6.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 10 ************************************************

1 0

What does "4m[terminated]" mean?
by Nan Xiao 28 May '15

28 May '15

Hi all, After installing CentOS 7 and restart it, it always promptd "4m[terminated]". What does this prompt mean? Does it will affect normal OS functions? Thanks in advance! Best Regards Nan Xiao

1 0

dummy interface shenanigans - CentOS6
by Frank Even 27 May '15

27 May '15

tl;dr - a renamed dummy interface is not persisting across reboots on Cent6. I have a situation where I need to rename a dummy interface on my system. I have a total of 3 dummy interfaces: dummy0 dummy1 adummy0 I've been doing some puppet testing in a vbox VM to get this all sorted out to deploy to a group of boxes. Every time I reboot my VM, it comes up WITHOUT adummy0, but I notice there is now an unconfigured dummy2. I've tried everything from adding aliases to /etc/modprobe.d/dummyopts.conf to renaming the interface via "ip" (ip link set dummy2 name adummy0). This is all fine during use, even during a network restart. But as soon as I restart the VM, it comes back up broken. I for the life of me have been unable to figure out why. I could use some help in narrowing down why this won't persist across reboots. I can write a startup script to deal with it, but it doesn't seem like a good solution. Thanks, Frank

2 3

Command line mp3 player
by Bowie Bailey 27 May '15

27 May '15

I have a CentOS 7 server that I want to use as an audio source for our hold music. It does not have a GUI installed, so I am looking for a program with a command line interface that will let me play a folder full of mp3 files on a continuous loop. MOC seems to do what I want, but I can't find a build for CentOS 7. Is there another program that I can use for this? Thanks. -- Bowie

7 10

Re: [CentOS] firefox 38 question
by johan.vermeulen7 27 May '15

27 May '15

m.roth(a)5-cent.usschreef: Chuck Campbell wrote: > Is Firefox 38 still borked for Centos 5? > > It shows up as available for update, but I don't recall seeing anything > saying the problems noted here have been fixed. Dunno 'bout 5; I'd been waiting, since I thought I remembered folks here complaining about it breaking language support for 6, and I *know* that some folks here have Chinese and Japanese support set, so I didn't want to break it. However, the other admin did updates yesterday, and no one's screamed yet. Note they're all on 6. mark Hello, I can say the language thing is fixed for Dutch for Centos6. Dunno for Centos5. There has been no announcement for Centos7. Greetings Johan _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

firefox 38 question
by Chuck Campbell 27 May '15

27 May '15

Is Firefox 38 still borked for Centos 5? It shows up as available for update, but I don't recall seeing anything saying the problems noted here have been fixed. thanks, -chuck --

3 2

serious problem with torque
by m.roth＠5-cent.us 27 May '15

27 May '15

Hi, folks, The other admin updated torque without testing it on one machine, and we had Issues. The first I knew was when a user reported qstat returning socket_connect_unix failed: 15137 socket_connect_unix failed: 15137 socket_connect_unix failed: 15137 qstat: cannot connect to server (null) (errno=15137) could not connect to trqauthd Attempting to restart the pbs_server did the same. Working with my manager, we found: a) torque had been updated from 2.x to 4.2.10, which is huge. b) Apparently, it no longer uses munged. Instead, it uses trqauthd, and that wasn't in the updated packages. c) We could not downgrade!!! d) My manager updated from testing, and installed, and then running trqauthd, and restarting pbs_server, it appears to be working again. Should I be filing a bug report? mark

4 9

unreachable peer
by Leon Fauster 27 May '15

27 May '15

Hey all, I have a public peer system (yy.yy.yy.yy) that is reachable via my home uplink (xx.xx.xx.xxx). 15:59:30.244199 IP xx.xx.xx.xxx.42958 > yy.yy.yy.yy.https: tcp 0 15:59:30.281931 IP yy.yy.yy.yy.https > xx.xx.xx.xxx.42958: tcp 0 15:59:30.281945 IP xx.xx.xx.xxx.42958 > yy.yy.yy.yy.https: tcp 0 15:59:30.305020 IP xx.xx.xx.xxx.42958 > yy.yy.yy.yy.https: tcp 105 15:59:30.344004 IP yy.yy.yy.yy.https > xx.xx.xx.xxx.42958: tcp 1412 15:59:30.344013 IP xx.xx.xx.xxx.42958 > yy.yy.yy.yy.https: tcp 0 15:59:30.344016 IP yy.yy.yy.yy.https > xx.xx.xx.xxx.42958: tcp 23 At the office we have a EL5 based router that can not reach the mentioned system. It does not give any hint about the problem. 15:57:51.751591 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 15:57:54.750834 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 15:58:00.749351 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 15:58:12.746408 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 15:58:36.740454 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 15:59:24.728605 IP o.ff.i.ce.50902 > yy.yy.yy.yy.https: tcp 0 I tried to connect with a removed ecn bit [1] [1] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification but this was not the solution. Any ideas? -- Thanks in advance! LF

3 5

specify port on check_memcached.pl
by Tim Dunphy 27 May '15

27 May '15

Hey guys, I'm trying use check_memcached.pl to monitor a couple of memcached services running on two ports. I have my command definition setup like this: # 'check_memcached' command definition define command { command_name check_memcached command_line $USER1$/check_memcached.pl -H $HOSTADDRESS$ -p $ARG1$ } And I have my service definitions setup like this: # Define a service to check memcached on web1 (just the basics for right now). define service{ use local-service ; Name of service template to use host_name web1 service_description Check Memcached 11211 contact_groups linux-admins check_command check_memcached!web1.example.com !11211 notifications_enabled 1 } # Define a service to check memcached on web1 (just the basics for right now). define service{ use local-service ; Name of service template to use host_name web1 service_description Check Memcached 11212 contact_groups linux-admins check_command check_memcached!web1.example.com !11212 notifications_enabled 1 } And if I run both checks manually they succeed: [root@monitor1:/usr/local/nagios/etc/objects/servers] #../../../libexec/ check_memcached.pl -H web1.example.com -p 11211 MEMCACHE OK: memcached 1.4.22 on web1.example.com:11211, up 22 minutes 52 seconds [root@monitor1:/usr/local/nagios/etc/objects/servers] #../../../libexec/ check_memcached.pl -H web1.example.com -p 11212 MEMCACHE OK: memcached 1.4.22 on web1.example.com:11212, up 12 minutes 2 seconds Yet, in my nagios web interface, I'm getting this error: Check Memcached 11211 <https://nagios.jokefire.com/nagios/cgi-bin/extinfo.cgi?type=2&host=web1&ser…> CRITICAL 05-24-2015 14:28:31 0d 0h 10m 19s 4/4 CRITICAL ERROR - Can not connect to '162.243.60.6' on port 0 Check Memcached 11212 <https://nagios.jokefire.com/nagios/cgi-bin/extinfo.cgi?type=2&host=web1&ser…> CRITICAL 05-24-2015 14:29:12 0d 0h 11m 8s 4/4 CRITICAL ERROR - Can not connect to '162.243.60.6' on port 0 I thought I could specify the command in the service definition like this: check_memcached!web1.example.com!11211 To reproduced the command as it's executed on the command line. How can I specify the port correctly here? Thanks, Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

3 2

KVM Kernel crash problem
by Günther J. Niederwimmer 27 May '15

27 May '15

Hello, With my new system centos 7.1 and KVM I have kernel crashes on boot in the DomU's like this id c51a566956f67146b061f2e7500c78090fe6eed4 reason: BUG: soft lockup - CPU#2 stuck for 23s! [192.168.90.200-:1459] time: Mo 25 Mai 2015 22:07:35 CEST cmdline: BOOT_IMAGE=/vmlinuz-3.10.0-229.4.2.el7.x86_64 root=UUID=b45384af-3198-4d06-a5c3-7d66741a4c04 ro crashkernel=auto rhgb quiet LANG=en_US.UTF-8 systemd.debug package: kernel count: 7 Directory: /var/tmp/abrt/oops-2015-05-25-22:07:35-1525-0 id 236eec9255f43fc1541b302919d5d5c18e8e1d60 reason: BUG: soft lockup - CPU#2 stuck for 22s! [192.168.90.200-:1459] time: Mo 25 Mai 2015 22:09:03 CEST cmdline: BOOT_IMAGE=/vmlinuz-3.10.0-229.4.2.el7.x86_64 root=UUID=b45384af-3198-4d06-a5c3-7d66741a4c04 ro crashkernel=auto rhgb quiet LANG=en_US.UTF-8 systemd.debug count: 1 Directory: /var/tmp/abrt/oops-2015-05-25-22:09:03-2645-0 Gemeldet: kann nicht berichtet werden I tested this on 2 systems but the problem exists? What can I do to report this crash? 'abrt-auto-reporting enabled' has no function missing file, have any a hint what can I do? -- mit freundlichen Grüssen / best regards, Günther J. Niederwimmer

1 0

Gcc issue on C7
by Fred Smith 26 May '15

26 May '15

I apologize up front, I'm sure this isn't the right place to ask, but I'm not sure where I should ask, instead. Hoping for some helpful hints in that regard... I'm using (trying to use...) the -fsanitize=thread feature. Though I'm finding the diagnostics rather cryptic, that isn't my issue here. Suddenly, a few days ago, I started getting this error while running the app i'm testing: [New Thread 0x7fcd41ec1700 (LWP 8142)] [New Thread 0x7fcd41692700 (LWP 8143)] [New Thread 0x7fcd40e63700 (LWP 8144)] [New Thread 0x7fcd3bfff700 (LWP 8145)] [New Thread 0x7fcd3b7fe700 (LWP 8146)] [New Thread 0x7fcd3affd700 (LWP 8147)] [New Thread 0x7fcd3a7fc700 (LWP 8148)] [New Thread 0x7fcd39ffb700 (LWP 8149)] [New Thread 0x7fcd397fa700 (LWP 8150)] [New Thread 0x7fcd38ff9700 (LWP 8151)] [New Thread 0x7fcd2f9ea700 (LWP 8152)] [New Thread 0x7fcd2f1e9700 (LWP 8153)] ThreadSanitizer: longjmp() is not supported [Thread 0x7fcd2f1e9700 (LWP 8153) exited] [Thread 0x7fcd2f9ea700 (LWP 8152) exited] [Thread 0x7fcd38ff9700 (LWP 8151) exited] [Thread 0x7fcd397fa700 (LWP 8150) exited] [Thread 0x7fcd39ffb700 (LWP 8149) exited] [Thread 0x7fcd3a7fc700 (LWP 8148) exited] [Thread 0x7fcd3affd700 (LWP 8147) exited] [Thread 0x7fcd3b7fe700 (LWP 8146) exited] [Thread 0x7fcd3bfff700 (LWP 8145) exited] [Thread 0x7fcd40e63700 (LWP 8144) exited] [Thread 0x7fcd41ec1700 (LWP 8142) exited] [Thread 0x7fcd47858700 (LWP 8141) exited] The message about longjmp() is the issue. This app doesn't use longjmp or siglongjump or any other of its cousins. It's possible that some 3rd-party lib (Oracle??) might, but I don't know why it has been working for several weeks and suddenly starts giving me this error... Clues welcome, thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

2 2

CVE-2014-4043 posix_spawn_file_actions_addopen
by Patrick Rael 26 May '15

26 May '15

Hi, Is there an ETA on when CVE-2014-4043 for glibc will be fixed in centos. I see the upstream vendor version glibc-2.20 has this fix supposedly, but I don't see this specific fix in the centos glibc changelogs. I've compiled the test code for this bug and as of glibc-2.17.77 the test reports the bug is present. Preferably we'd like this fix on centos6.6 as we can't move to 7.0 yet. Thanks, -->Pat

2 1

"selinux --disabled" in kickstart file does NOT disable SELINUX
by Charlie Brune 26 May '15

26 May '15

Has the "selinux --disabled" line for kickstart files been depreciated? My CentOS 6.6 kickstart file contains the line: selinux --disabled After the install completes, SELinux is enabled instead of disabled. /etc/selinux/config contains "SELINUX=enforcing" instead of "SELINUX=disabled". Thanks, Charlie

6 7

CentOS-announce Digest, Vol 123, Issue 9
by centos-announce-request＠centos.org 26 May '15

26 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:1025 CentOS 6 firefox BugFix Update (Johnny Hughes) 2. CEBA-2015:1024 CentOS 5 rsyslog5 BugFix Update (Johnny Hughes) 3. CEBA-2015:1026 CentOS 5 firefox BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 May 2015 14:36:16 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1025 CentOS 6 firefox BugFix Update Message-ID: <20150525143616.GA592(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1025 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1025.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4345bd1df5b83359f0be4b26593a3c54610ad3f2d8444930c302311210bb88d7 firefox-38.0.1-1.el6.centos.i686.rpm x86_64: 4345bd1df5b83359f0be4b26593a3c54610ad3f2d8444930c302311210bb88d7 firefox-38.0.1-1.el6.centos.i686.rpm c5171dd56742ba8dc66c2c37fb3d98e42bd01f78dab535340bab639df881b9cd firefox-38.0.1-1.el6.centos.x86_64.rpm Source: 802da2511cfdb9eb1ffbb1e52348b4e7c922707a4dcc8b180cde6827d22501c5 firefox-38.0.1-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 25 May 2015 14:47:48 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1024 CentOS 5 rsyslog5 BugFix Update Message-ID: <20150525144748.GA30660(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1024 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1024.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3e094236ec2178eea5eccc8207dffb5d32f396ce3028f048514668e2d0e55364 rsyslog5-5.8.12-7.el5_11.i386.rpm 7b497a21efa70cc6d300fc0900e4d2e12bebc6774c5c13cecce54bd25adb2bd1 rsyslog5-gnutls-5.8.12-7.el5_11.i386.rpm d7dd7646283c69dd965d1c96a3af97000569a4082b95bfb54c3b5e26ee0782e8 rsyslog5-gssapi-5.8.12-7.el5_11.i386.rpm 83fafa010504b55887c1fbaa045ceacbb55acf0be224286d6d7284a8d8d2c5f9 rsyslog5-mysql-5.8.12-7.el5_11.i386.rpm f27e86c434717b5654fb0ec1fdd4708a0ed80adf16b1dfdf1c3e3737e3bef808 rsyslog5-pgsql-5.8.12-7.el5_11.i386.rpm d2f8141ef436aad686d256ac7c810e0af18b80525840e6ef39304c83606070f9 rsyslog5-snmp-5.8.12-7.el5_11.i386.rpm x86_64: 1e9be5e99e9381e353efaa8f7063e3448f18b08da7fe7972502e94da8ab6879c rsyslog5-5.8.12-7.el5_11.x86_64.rpm 311c186b0746795e7f5dc260e3d858dab6b3d5ed96d1b592b2bbbadbb5409cf2 rsyslog5-gnutls-5.8.12-7.el5_11.x86_64.rpm 06880d6705ac5dd688d02752abf5fbf468b2632f1a1c1299fd55bbaa8f12af14 rsyslog5-gssapi-5.8.12-7.el5_11.x86_64.rpm 7624919a44cf03a0bb2a1bbbc7ebbda0f2d126cc204345a172d65fba925c405d rsyslog5-mysql-5.8.12-7.el5_11.x86_64.rpm 23949c0942cca48b1be050ac147143a20278c338cbfc622faceaba31d7877ddb rsyslog5-pgsql-5.8.12-7.el5_11.x86_64.rpm 5782448c63954458157638f79df4a67eb5b6b20fe1300502530f71769828cca6 rsyslog5-snmp-5.8.12-7.el5_11.x86_64.rpm Source: 4d8280a183a25cb2b901f6f593daa44ddba7ef52fe0740ebf840a6b4b0681ca2 rsyslog5-5.8.12-7.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 25 May 2015 16:31:08 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1026 CentOS 5 firefox BugFix Update Message-ID: <20150525163108.GA7140(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1026 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1026.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cc26b9f3b4035b45d050b3dc7a47fc501378f345d98a7325a05aa8ced915db95 firefox-38.0.1-2.el5.centos.i386.rpm x86_64: cc26b9f3b4035b45d050b3dc7a47fc501378f345d98a7325a05aa8ced915db95 firefox-38.0.1-2.el5.centos.i386.rpm 077e71e9d092af8f71be5e8e8a3302462d15c4954cca0629acaf860fb3cea201 firefox-38.0.1-2.el5.centos.x86_64.rpm Source: f6f39fea1d96a709691c6c6b0fb8a2116765c1cc1f49e027970d973e3e00d760 firefox-38.0.1-2.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 9 ***********************************************

1 0

CentOS 7 and mobile broadband Ericsson F5521gw
by Tim 26 May '15

26 May '15

Hello all, I have got problems to get my mobile broadband connection running on my Lenovo T420. But NetworkManager doesn't seem to connect. I ran through the wizard for mobile broadband connections but it doesn't work. The Ericsson f5521gw seems to run with cdc_ndm module. I also installed modem-manager-gui and unlocked my sim by using mmcli. But still NetworkManager can't establish a connection. I also can't delete connection out of the NM-GUI so I needed to remove them from /etc/NetworkManager/system-connections. Did I miss something? The logs seem to be fine so far. My CentOS 7 has all recent updates applied. Thanks in advance Tim

1 0

nmcli, pppoe (ADSL login and password)
by Mihamina Rakotomandimby 26 May '15

26 May '15

Hi all, My target is: CentOS 7 on a X less gateway My internet provider provides a pppoe connection with a login and a password On CentOS6, I used to setip it up with rp-pppoe wizzard and it works: it sets up the needed things to make the network init script launch the connection at boot. I would like to learn how to do it with NM and CentOS 7. How to invoke nmcli in order to have it connected at boot? Thank you.

1 0

Centos 7.1 openldap-2.4.39 question
by Paul R. Ganci 26 May '15

26 May '15

I have two instances of an openldap-2.4.39 server running with syncrepl in a master-master replication setup. These are Centos 7.1 test servers which have been running for over 2 months now with no problems. Partly the good behavior of the LDAP servers is due to very little exercise. Yesterday I decided to try and see exactly how well replication was working. With server-2 up and running I tried these sequences of commands on server-1 (domain, user and DNs have been changed): server-1> systemctl stop slapd server-1> slapadd -l useradd.ldif server-1> systemctl start slapd server-1> ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser # extended LDIF # # LDAPv3 # base <ou=People,dc=example,dc=com> with scope subtree # filter: uid=newuser # requesting: ALL # # newuser, People, example.com dn: uid=newuser,ou=People,dc=example,dc=com uid: newuser cn: NEW01- newuser uidNumber: 100510 objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: top gecos: NEW01- newuser sn: NEW01- newuser loginShell: /bin/bash gidNumber: 100510 homeDirectory: /users/home/newuser userPassword:: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx # search result search: 3 result: 0 Success # numResponses: 2 # numEntries: 1 As you can see the user was added correctly. However after a few minutes to give replication a chance to work I went over to server-2 and tried the equivalent ldapsearch command: server-2> ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser # extended LDIF # # LDAPv3 # base <ou=People,dc=example,dc=com> with scope subtree # filter: uid=newuser # requesting: ALL # # search result search: 3 result: 0 Success # numResponses: 1 No matter how long I wait, the newuser is never replicated on server=2. So I tried something different. After putting back the LDAP databases so that they were consistent I did this sequence on server-1 server-1> ldapadd -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com -f useradd.ldif This time the ldapsearch command: ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser returns the new user on both server-1 and server-2! What I found is that as long as I use ldapadd, ldapdelete and ldapmodify the LDAP databases replicate correctly in a master-master mode. My first question: Should the first sequence of commands with the slapadd command work or am I expecting behavior that is not supported? My second question: If the first sequence of commands with the slapadd command should work but does not can anyone suggest a reason as to why? For example do both server-1 and server-2 have to be shutdown before doing the slapadd? Thank you. -- Paul (ganci(a)nurdog.com) (303)257-5208

2 1

Systemd
by Kirk Bocek 25 May '15

25 May '15

So I've built my first CentOS 7 host and am learning all the new ways of doing things. I setup and enabled ntpd but after a reboot I get: $ systemctl status ntpd ntpd.service - Network Time Service Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled) Active: inactive (dead) After issuing: $ systemctl start ntpd Ntpd runs just fine. But why isn't it loading at boot time?

11 19

AUTO: Sergio Luis Chavarria Cisneros is out of the office (returning 28/05/2015)
by slchavarria＠iusacell.com.mx 25 May '15

25 May '15

I am out of the office until 28/05/2015. Estaré ausente de la oficina, para cualquier apoyo que necesites favor de contactar a Jose Manuel Flores Dublan Email: jfloresd(a)iusacell.com.mx Cel: 5530300533 Note: This is an automated response to your message "CentOS Digest, Vol 124, Issue 25" sent on 05/25/2015 7:00:02 AM. This is the only notification you will receive while this person is away. “Este mensaje y cualquier archivo que se adjunte al mismo es propiedad de GRUPO IUSACELL y podría contener información privada y privilegiada para uso exclusivo del destinatario. Si usted ha recibido esta comunicación por error, no está autorizado para copiar, retransmitir, utilizar o divulgar este mensaje ni los archivos adjuntos. En este caso por favor notifique inmediatamente al remitente por este mismo conducto. Gracias.”

1 0

mod_suPHP
by Bob Puff 24 May '15

24 May '15

I have been trying to get mod_suPHP working on Centos 7's httpd, just as I've done with versions 5 and 6. I found a couple RPMs that others have built, and I even compiled suPHP from source, and got a successful compile. Each time, I can see with phpinfo() that the mod_suPHP module did indeed load, yet I cannot seem to get any script to run in a user other than the default of 'nobody'. Has anyone else had success with this? For a virtual hosting environment, I really need this type of functionality. 7 is definitely a different animal, but there must be something I am missing. I do have selinux disabled. Bob

2 1

CentOS-Base.repo baseurl commented out
by Tim Semeijn 24 May '15

24 May '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Dear, Recently I have noticed that on all my CentOS machines the CentOS-Base.repo file seems to have been modified resulting in all baseurl= lines being commented out. Did I miss something that was planned or is this a bug? Best regards, - -- Tim Semeijn Babylon Network pgp 0x5B8A4DDF -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) Comment: GPGTools - http://gpgtools.org iQIcBAEBCgAGBQJVYbnrAAoJEIZioqpbik3fQW0P+gK3GcGdsOHORXgRKWA/QcAP 7n1TkEhGNflTRDcfEwF/uvO3ukdcQ94L9vnC6kxFmzCmDyLy/aph/Ozfpl429/rO k4iy2vplEnEbiLValkmvEJ22U/cjThTyMZ3DDKMUVOBa+MTRbh9BueqLR6S1WLso uxLKXHUAwqfIFKnD7B0vuZcdYf9bRDcmvxkK42rmMKnYEVSsWEK/0+ZWv6VTWRam MJ+VedfC86Z7ftp694SsMwnjR/u913xaEmwze4ErshLC8RSto0HMbBZ9tkgyVkos Ez/PphGJaYbeCMlFQIngSYUa8uBhGKOWD07RGVVs+IIPjq8uQ5mKY7+xkpSWI0Ew Nytj/0vSPWOmvAFACyz5+sCNKRp8ig4XuE7vdd9OVlE7Vh+MKyUEs0SK57JSD8Tc rKaYBchNJrCurW5YY1KrwYB6wWcDTf0QvfHQYJxIVEvrxho9JIXgNkYhGyZpZo8L 1J9eU7LNjalnr7ySe6DxU+50uAaIG5qgavLvv1PMUlfHy3rvVVOPctXMY+jb3OCr NICKYgkE7LEhbbnPcTemrR44H9OuBuWOEu67yn4hVYIi0yzRq8e6D1NVpaVMx+Rv wocncxIy7drEl1dcs7DwHe85fWwwavtMnRwm+c+ObhbhHqksoZA2OziNP6DEKUlN jgmV29E+Jnc96+ckj7B/ =9qZe -----END PGP SIGNATURE-----

3 8

can i get .spec file for apache httpd of centos?
by Vijendra Agarwal (vijagarw) 23 May '15

23 May '15

Hi All, Currently my system is using httpd 2.2.27. As there were many Vulnerability fixes released under 2.2.29, I would like to upgrade the Apache httpd. My system is having CentOS 6.5. I checked on CentOS Repos using yum but could not find the latest httpd rpm from there. So I am building the httpd rpm from the source tar ball downloaded from apache site. I am able to build the rpm successfully but after installation I am facing lot many different issues such as 1. new rpm does not show anything for below command rpm –q httpd —changelog 2. If I check the compiler option used in httpd 2.2.27 and 2.2.29 are very different. For 2.2.27 :- httpd: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic (Build by CentOS) For 2.2.29 :- httpd: -O2 –g (Build by myself) Query ===== 1. How to provide the above compiler option so that the rpm get build with them? 2. Is it possible to get httpd.spec file using which CentOS has build the httpd rpm? Thanks Vijendra.

3 3

No announcement for CEBA-2015-1018
by Leonard den Ottolander 23 May '15

23 May '15

Hi, Received lvm2 updates for CEBA-2015-1018 but haven't seen an announcement on CentOS announce yet nor can I find it in the archives. Is it still in the pipeline or did something go wrong? Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

2 2

Centos 6.6 Can't connect to local MySQL server through socket /var/lib/MySQL/MySQL.sock (error 2002)‏
by Graham Wilman 22 May '15

22 May '15

Hi Total newby to centos I am currently assisting a community radio station set up in the Uk we are using a server based system for our playout software, unfortunately at the moment one of our client servers is experience the above error I came across the error on our main server a few weeks ago and found the solution just by reinstalling the MySQL db but I have tried to deploy the same fix on our client server otherwise known as studio-b client but unfortunately this has not solved the problem any assistance with this would be very much appreciated. All the best Graham Wilman

6 6

Xen4CentOS on Centos7?
by Dustin Kempter 22 May '15

22 May '15

Hi all, Looking to move from VMware to Xen4CentOS. We currently run Centos7 as our servers main distort. All the documentation I’ve found on the Xen4CentOS only refers to Centos6. Do any of you know if it currently or is being developed to work with Centos7? thanks in advance

3 2

help please , How SYN and ACK packets counted by the server(centos)
by Ibrahim Celikbilek 22 May '15

22 May '15

I have a question about tcp layer of linux kernel. I want, Syn and ack packages received to server will be counted. [image: enter image description here] where total_syn_count and total_ack_count are variables to be defined and will be increased Which files to be used ???? tcp_input.c ,tcp_output.c , tcp_ipv4.c

2 1

CentOS-announce Digest, Vol 123, Issue 8
by centos-announce-request＠centos.org 22 May '15

22 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:1019 CentOS 6 fence-agents BugFix Update (Johnny Hughes) 2. CEBA-2015:1018 CentOS 6 lvm2 BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 May 2015 12:58:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1019 CentOS 6 fence-agents BugFix Update Message-ID: <20150520125809.GA58210(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1019 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1019.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4ad03d85c413e46805537c6aeadf30d0f6a4aa8f93ee6c862001da78dc1d532e fence-agents-3.1.5-48.el6_6.3.i686.rpm x86_64: 0215191635e029610501a36e6c0f6e3b9102d6a5c41cfb02067c72e2ecf26353 fence-agents-3.1.5-48.el6_6.3.x86_64.rpm Source: 98a416079169617bcb5a7b4846c3d19f1ebd8f81b51a59ae3ce26e2ba0692f12 fence-agents-3.1.5-48.el6_6.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 20 May 2015 12:58:39 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1018 CentOS 6 lvm2 BugFix Update Message-ID: <20150520125839.GA58386(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1018 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1018.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9725e0eac57cba6f6d379875d41d3cf6abe119b2dd66578ca69029ee60ef8fdd cmirror-2.02.111-2.el6_6.3.i686.rpm 782202a3cbd3ce78ebde911b41a12fd84e4d75167c1e763e491ebdb285916d4d device-mapper-1.02.90-2.el6_6.3.i686.rpm 031decff2e7094acfd6ea8b6799e7ee0a9b34bbd1ce34fa6cd714f224c4664d0 device-mapper-devel-1.02.90-2.el6_6.3.i686.rpm e94443eefd701d40f44220993f324d928bc1d2de7a8821766bfa4d07d5eb8411 device-mapper-event-1.02.90-2.el6_6.3.i686.rpm 9eda90c40dc95a4cc7eccdee7333d46c840f3c4ada11d24e0f9039ca746d943b device-mapper-event-devel-1.02.90-2.el6_6.3.i686.rpm e54bdab54ee0e5e1f4603d306334a20832c0a2458a5946721f97217ed1f7b7bf device-mapper-event-libs-1.02.90-2.el6_6.3.i686.rpm c0917aa9b552011aa738feabbde0ef657216574c67bca32b83602ebaa5a1d03c device-mapper-libs-1.02.90-2.el6_6.3.i686.rpm 22caaf73874d2dec1ddbf2438dd893970f0c5a6d4856e815c80edb4faf0d9a9e lvm2-2.02.111-2.el6_6.3.i686.rpm 6715717aca82768f762d271d6ce34537aabcb0379f3560adb2403e5837f04f7e lvm2-cluster-2.02.111-2.el6_6.3.i686.rpm d57f8d545428c37acfd0a22bdeae010fb817f962a43789a50e476c08f04edbdc lvm2-devel-2.02.111-2.el6_6.3.i686.rpm edbf4b48a2ec41c80bdaea8fd538345d64739f94f2839c7f309a280c71391f3f lvm2-libs-2.02.111-2.el6_6.3.i686.rpm x86_64: 931bd87349d03b6e556a3984b84380039aabd5cdd4930c05f2e1ae1b15a98ccc cmirror-2.02.111-2.el6_6.3.x86_64.rpm dab31e189ecda89e1e5a49b9389b6ae2a2923544d7211b6ce237fe1da22a557f device-mapper-1.02.90-2.el6_6.3.x86_64.rpm 031decff2e7094acfd6ea8b6799e7ee0a9b34bbd1ce34fa6cd714f224c4664d0 device-mapper-devel-1.02.90-2.el6_6.3.i686.rpm b29b363f5612cbf200272d584b38fae90c39710b8e5e347f0fba1d2715fb1c4a device-mapper-devel-1.02.90-2.el6_6.3.x86_64.rpm ee83fbec92dc83b9b74f5b5b2caa1f6ced86bd15f300d5b3f96223b2fd6db800 device-mapper-event-1.02.90-2.el6_6.3.x86_64.rpm 9eda90c40dc95a4cc7eccdee7333d46c840f3c4ada11d24e0f9039ca746d943b device-mapper-event-devel-1.02.90-2.el6_6.3.i686.rpm 8cb632b97a850b7e0c85e5b5cca2d15395eda0196b756bab6d84e9b703b468b6 device-mapper-event-devel-1.02.90-2.el6_6.3.x86_64.rpm e54bdab54ee0e5e1f4603d306334a20832c0a2458a5946721f97217ed1f7b7bf device-mapper-event-libs-1.02.90-2.el6_6.3.i686.rpm 84094500064f3f1babc328b56aa686f3f9c6fd85e7acfa4ab1b3ad4347384850 device-mapper-event-libs-1.02.90-2.el6_6.3.x86_64.rpm c0917aa9b552011aa738feabbde0ef657216574c67bca32b83602ebaa5a1d03c device-mapper-libs-1.02.90-2.el6_6.3.i686.rpm 80800c7333266cc27a9773efadb728856d63793b49d50efdfe2ad1f69092940f device-mapper-libs-1.02.90-2.el6_6.3.x86_64.rpm 13e50eb2a16ee307d29133bc480dfbbe204becf6b2bfc7b06d3c10006e9aa006 lvm2-2.02.111-2.el6_6.3.x86_64.rpm 928b1edb81e5b8ec3e70ee1ca2cef0addd6578caa74c520cd6cc1da669fa03cb lvm2-cluster-2.02.111-2.el6_6.3.x86_64.rpm d57f8d545428c37acfd0a22bdeae010fb817f962a43789a50e476c08f04edbdc lvm2-devel-2.02.111-2.el6_6.3.i686.rpm 246aa52a8329a2099bb51a44aad8b7fdceb11ce626d1a2c6739ab1ff002ab18a lvm2-devel-2.02.111-2.el6_6.3.x86_64.rpm edbf4b48a2ec41c80bdaea8fd538345d64739f94f2839c7f309a280c71391f3f lvm2-libs-2.02.111-2.el6_6.3.i686.rpm f4800a90ae01cdedf8fc815195024bed0a1f2d99f68993e34da4ffcc1ffc797a lvm2-libs-2.02.111-2.el6_6.3.x86_64.rpm Source: e61c53b478939ce5f93bebf5172f1ee2bf01555f85ee157077589526eb58d472 lvm2-2.02.111-2.el6_6.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 8 ***********************************************

1 0

Re: [CentOS] Centos 6.6 Can't connect to local MySQL server through socket /var/lib/MySQL/MySQL.sock (error 2002)‏
by Richard 21 May '15

21 May '15

------------ Original Message ------------ > Date: Thursday, May 21, 2015 09:43:24 PM +0100 > From: Graham Wilman <gwillman(a)hotmail.co.uk> > > Hi > > Total newby to centos I am currently assisting a community radio > station set up in the Uk we are using a server based system for > our playout software, unfortunately at the moment one of our > client servers is experience the above error I came across the > error on our main server a few weeks ago and found the solution > just by reinstalling the MySQL db but I have tried to deploy the > same fix on our client server otherwise known as studio-b client > but unfortunately this has not solved the problem any assistance > with this would be very much appreciated. > All the best > Graham Wilman When you get this error have you confirmed that mysqld is actually running, e.g., with a "ps"? What is the output from: /etc/rc.d/init.d/mysqld status Normally the socket file is: /var/lib/mysql/mysql.sock (note the capitalization). If mysql is running, check the name (including capitalization) of the socket directory/file. If it's (the standard) lowercase, then check the client software configuration to see if there's something pointing to the mixed-case form that your error is showing. [The default location for the mysql configuration file is /etc/my.cnf, but it can be in other locations.] - Richard

1 0

I Have Multiple Ips But Can Only Telnet to One Interface. Not the subinterface. How to Fix?
by Mike McKoy 21 May '15

21 May '15

Hi guys, I have multiple IPs bound to my Centos 6.6 box but I can only telnet to one IP. Any ideas on what to do? I've searched the internet so far with every keyword I can think of to no avail. I can see that postfix is only listening on the first IP and to localhost. The IP I cannot smtp to is on ETH0:1. I can access it via port 80 (web traffic) but the connection is refused if i try to telnet. [image: :shock:] The domain I can telenet to is mymodeltalk.com The domain I cannot telenet to is inform.mymodeltalk.com I have posted my current IP Tables rules, netstat, ifconfig -a, and route -n. I have SElinux set to permissive. [root@mail1 log]# netstat -plnt |grep :25 tcp 0 0 172.30.1.113:25 0.0.0.0:* LISTEN 18800/master tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 18800/master [root@mail1 log]# iptables -S -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 587 -j ACCEPT -A INPUT -p tcp -m tcp --dport 110 -j ACCEPT -A INPUT -p tcp -m tcp --dport 143 -j ACCEPT -A INPUT -p tcp -m tcp --dport 993 -j ACCEPT -A INPUT -p tcp -m tcp --dport 995 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 80 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 587 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 9292 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 110 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 143 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 22 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT [root@mail1 log]# ifconfig -a eth0 Link encap:Ethernet HWaddr 0A:28:21:76:97:85 inet addr:172.30.1.113 Bcast:172.30.1.255 Mask:255.255.255.0 inet6 addr: fe80::828:21ff:fe76:9785/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9001 Metric:1 RX packets:793739006 errors:0 dropped:0 overruns:0 frame:0 TX packets:480841833 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:937438761212 (873.0 GiB) TX bytes:136066252190 (126.7 GiB) Interrupt:18 eth0:1 Link encap:Ethernet HWaddr 0A:28:21:76:97:85 inet addr:172.30.1.65 Bcast:172.30.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:9001 Metric:1 Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:369804 errors:0 dropped:0 overruns:0 frame:0 TX packets:369804 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:207298477 (197.6 MiB) TX bytes:207298477 (197.6 MiB) [root@mail1 log]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 172.30.1.1 0.0.0.0 UG 0 0 0 eth0 -- Mike McKoy *404.590.7176* http://MyForeverHair.com http://www.MyModelTalk.com http://InCrowdUSA.net http://www.google.com/profiles/mikemckoy

4 10

https everywhere.
by James B. Byrne 20 May '15

20 May '15

What are the plans for the CentOS repos with respect to authentication and https everywhere? At the moment it is a trivial exercise to perform a MTM attack during a yum update over http. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

8 7

CentOS-announce Digest, Vol 123, Issue 7
by centos-announce-request＠centos.org 20 May '15

20 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2015:1012 Important CentOS 6 thunderbird Security Update (Johnny Hughes) 2. CESA-2015:1012 Important CentOS 5 thunderbird Security Update (Johnny Hughes) 3. CEBA-2015:1016 CentOS 6 bind BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 May 2015 15:37:40 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:1012 Important CentOS 6 thunderbird Security Update Message-ID: <20150518153740.GA47877(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:1012 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-1012.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bbfcda22cd70fbc5dfef4f55ae0805ec17600184187cb6772b84d2ac4488062a thunderbird-31.7.0-1.el6.centos.i686.rpm x86_64: 345eafa65b4ec7f43cbecd3b574eddaf68ec5c6e8dd6f36c7e5d86f5718b20f9 thunderbird-31.7.0-1.el6.centos.x86_64.rpm Source: c00e1249fd68b76040de3d1d55e5defd32aef185e64be05469ddc6b765f2ee36 thunderbird-31.7.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 19 May 2015 12:52:56 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:1012 Important CentOS 5 thunderbird Security Update Message-ID: <20150519125256.GA27606(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:1012 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-1012.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 017951e5e03b5565f74f4496298b8b7c9d231fd6011ba112f1ec81b755d24c90 thunderbird-31.7.0-1.el5.centos.i386.rpm x86_64: fb96c7d30dcefe60c58b718edac792610fa818b7705f2659e41c464a7e097087 thunderbird-31.7.0-1.el5.centos.x86_64.rpm Source: 888bd17093cc65b0327c0c3d319585babde93413e4824866335d0c234abdcfea thunderbird-31.7.0-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 19 May 2015 13:37:28 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1016 CentOS 6 bind BugFix Update Message-ID: <20150519133728.GA19634(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1016 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1016.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 21796f7651ea8edf0abcc5e18eea10e7f8dcdf5e1370b7f9c57e7f28794861fe bind-9.8.2-0.30.rc1.el6_6.3.i686.rpm fd99c7e076ebd7dca6c22cd30839eaf38ff922a605757a3137ef7b2b6d0f09c4 bind-chroot-9.8.2-0.30.rc1.el6_6.3.i686.rpm 65da55142c1c84308b48756f4638072fc68cdfd617fe96aff5d102e1e63757e8 bind-devel-9.8.2-0.30.rc1.el6_6.3.i686.rpm dc1162f7e79cbecc4bc738dc4afd188a507a01f9125820a7b140c8b88aaa41ee bind-libs-9.8.2-0.30.rc1.el6_6.3.i686.rpm a39e40e6018b0a9e2516e1f4183745d9e07612a0efe7e7a75f79e51e672aaed6 bind-sdb-9.8.2-0.30.rc1.el6_6.3.i686.rpm f14b7f9e8edddd5a4591a019a68cea4ac9ada5d0b0b90cf2907a8615e3ae6b20 bind-utils-9.8.2-0.30.rc1.el6_6.3.i686.rpm x86_64: 3460d7db849d92876eac3da4779697417077cef2623efd6154dc86cad3f24bed bind-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm c505d86b72b6f7f48cca9166a28284cc42a05f325be0f298d958ae95679e4c78 bind-chroot-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm 65da55142c1c84308b48756f4638072fc68cdfd617fe96aff5d102e1e63757e8 bind-devel-9.8.2-0.30.rc1.el6_6.3.i686.rpm 8120eaa006287cabad1979df69ad93175eb9b24f6a8e73ec6b8cf99f2a26226b bind-devel-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm dc1162f7e79cbecc4bc738dc4afd188a507a01f9125820a7b140c8b88aaa41ee bind-libs-9.8.2-0.30.rc1.el6_6.3.i686.rpm 5e2afa5d1109347fdd64537ff125bc2df0721104dc796781e485b01ba202ca42 bind-libs-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm 3ec3897f46363bd65be6f00798677fad0ac85af6be58362573d4d4d68926bc42 bind-sdb-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm 05f7970ed69dd28d992985c03b5276b7683cd57c257879844be16e0f48c65a9b bind-utils-9.8.2-0.30.rc1.el6_6.3.x86_64.rpm Source: bf3ff6c38ea828be36cd5019f2aa8ce96aebd760b8b3b23ffeaddae089fcc872 bind-9.8.2-0.30.rc1.el6_6.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 7 ***********************************************

1 0

Turning off wifi in CentOS 7
by m.roth＠5-cent.us 20 May '15

20 May '15

Someone else got the 7 pxe install going, and one thing that's annoying is that NetworkMangler appears to be regularly trying to fire up the wifi. On a workstation, in a wired environment. I just want to tell NM to knock it off....It's Monday, and my searching isn't going too well. Clues for the poor? mark

6 10

Upgrading to CentOS 7
by Timothy Murphy 19 May '15

19 May '15

I read in <http://wiki.centos.org/TipsAndTricks/CentOSUpgradeTool> "Warning: use of this tool is currently not recommended as several system- critical packages are of a higher version number in CentOS 6.6 than they are in CentOS 7 so those do not get upgraded correctly. This renders yum and several other system tools non-functional." Does this still hold? It seems to me a bit pointless to offer a tool with the warning that it does not work. -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

5 6

mail with chnage "from address" not work on CentOS 6
by mcclnx mcc 19 May '15

19 May '15

We have CEntOS 6.3 on DELL server. WE try to use following mail command but failed. This command perfect work on CentOS 5.X. $ mail -s "test..." user1(a)sun.com -- -f NoReply(a)App.MD.gov test . EOT $ /home/app/oracle/dead.letter... Saved message in /home/app/oracle/dead.letter problem come from "-- -f NoReply(a)App.MD.gov". But it work correctly on CentOS 5.x. Anyone know how to fix it? Thanks

4 4

Re: [CentOS] mail with chnage "from address" not work on CentOS 6
by Richard 19 May '15

19 May '15

------------ Original Message ------------ > Date: Tuesday, May 19, 2015 10:13:20 AM -0400 > From: Tim Evans <tkevans(a)tkevans.com> > > On 05/19/2015 10:07 AM, mcclnx mcc wrote: >> We have CEntOS 6.3 on DELL server. WE try to use following mail >> command but failed. This command perfect work on CentOS 5.X. $ >> mail -s "test..." user1(a)sun.com -- -f NoReply(a)App.MD.gov test >> . >> EOT >> $ /home/app/oracle/dead.letter... Saved message in >> /home/app/oracle/dead.letter >> >> problem come from "-- -f NoReply(a)App.MD.gov". But it work >> correctly on CentOS 5.x. Anyone know how to fix it? > > CentOS 6 man page says '-f' means "mail the contents of the file." > YOu probably want '-r' With 5.x "mail" was /usr/bin/mail, and "--" lets you pass sendmail options (where the -f is the "From"). With 6.x and 7, "mail" is symlinked to mailx, which doesn't seem to have the "--" flag and the ability to pass the sendmail options. In both mail and mailx, a bare "-f" is a read from file.

1 0

Constant screen flicker with Firefox browser
by László Csontos 19 May '15

19 May '15

Hi Guys, I'm facing this issue: https://bugs.centos.org/view.php?id=8482 It came after upgrading to 7.1 and only Firefox is affected, Chrome is working. What I've tried so far: - Tried NVIDIA drivers 340.65, 346.59 and 346.72 - Upgraded Firefox to 38 - Tried Safe more / Refresh Firefox - Tried to turn HW accel. off in Firefox None of these has helped to eliminate the issue. Do you know how to work this around? Many thanks, László

3 5

CentOS-announce Digest, Vol 123, Issue 6
by centos-announce-request＠centos.org 19 May '15

19 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:1014 CentOS 7 libtar FASTTRACK BugFix Update (Johnny Hughes) 2. CESA-2015:1012 Important CentOS 7 thunderbird Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 May 2015 13:58:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:1014 CentOS 7 libtar FASTTRACK BugFix Update Message-ID: <20150518135803.GA45940(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:1014 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-1014.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 79daf938d2f7c47f0d064ac8fb6b2735e72e307339da36165711ba3caf0cedbf libtar-1.2.11-29.el7.i686.rpm be06046732cf430b90e72676ab49323110947a3fadddf3c0dd631e2ddbb3f8ff libtar-1.2.11-29.el7.x86_64.rpm f94b7bf3879bc5bef3ae1c3c760ae26a6c35a385c95453881e8277df27862185 libtar-devel-1.2.11-29.el7.i686.rpm d667b13c0759476805665ca17811518f1a63f9f45c0bb22d256d06428007d5b5 libtar-devel-1.2.11-29.el7.x86_64.rpm Source: 58fd93104a52e08242b5d7bb0f4e33b1055245f31064df9adfc036e7b53dbae2 libtar-1.2.11-29.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 18 May 2015 14:07:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:1012 Important CentOS 7 thunderbird Security Update Message-ID: <20150518140712.GA46173(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:1012 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-1012.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 89f666c144a237773ea1e85a09c865cd4f3de35b269c6eb9699e895909ee1527 thunderbird-31.7.0-1.el7.centos.x86_64.rpm Source: 283c1401339932a32958dd43275409bddbcd84ae7393129f22ec0c69c813432e thunderbird-31.7.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 6 ***********************************************

1 0

Missing Java packages for java-1.6.0-openjdk under CentOS 5
by Robert Heller 18 May '15

18 May '15

When I compile some Java code I am getting this sort of error: "package org.apache.http.annotation does not exist" I am presuming that I am missing a Jar file in /usr/lib/jvm/java-1.6.0-openjdk.x86_64. Most of the Jar files in /usr/lib/jvm/java-1.6.0-openjdk.x86_64 come from one or another RPMs, most from the CentOS 5 distro RPMs. But I cannot figure out which RPM(s) I am missing. I tried doing a web search for org.apache.http.annotation with el5 and rpm, but got nothing useful. What am I missing? -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

3 2

Centos 7 Network Question
by david 16 May '15

16 May '15

I have a question about the network and Centos 7 I am experimenting with two C7 installations: - On relatively new hardware, configured with fixed IP address in IPV4 only - on top of Windows, using VMWare, sharing my windows connection via Vmware's bridge with IPV4 only. On both configurations, I run a script every five minutes to test the network. The sequence is as follows: - Find the default interface using "ip route" - Find that interface's IP address by scanning the output of "ip route" for a match in interface. If the above tests fail to resolve, I issue "systemctl restart network", and post a mail message to myself. When this happens, the network does indeed come back correctly. I do the same sequence on Centos 6 installations, (using "system network restart"). I find that on Centos 6, I almost never get notified that the restart occurred (except when there's a real reason). On Centos 7, however, I find that about once a day or so, I get notified, even though there's nothing that has changed. On Centos 6, I left the avahi daemon running. On Centos 7, I disabled avahi (because with it enabled, I was getting this failure once every few hours). Are there any clues in the above? On C7, the "messages" log has nothing that I can associate with the failure. David

3 3

Re: [CentOS] [CentOS-announce] CESA-2015:0988 Critical CentOS 7 firefox Security Update --this breaks language settings
by johan.vermeulen7＠telenet.be 16 May '15

16 May '15

----- Oorspronkelijk bericht ----- Van: "Johnny Hughes" <johnny(a)centos.org> Aan: centos-announce(a)centos.org Verzonden: Woensdag 13 mei 2015 03:01:32 Onderwerp: [CentOS-announce] CESA-2015:0988 Critical CentOS 7 firefox Security Update CentOS Errata and Security Advisory 2015:0988 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-0988.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0515534be7270e32c574f9d869fa86afacb9285285c394d7b5a3d0a50c7a8838 firefox-38.0-3.el7.centos.i686.rpm 3b0c44ed663e3270058f9dc19f088b34380cc854a3632dd41db4ec2ba2551c67 firefox-38.0-3.el7.centos.x86_64.rpm Source: 4d106e031fffbf2c7c19f8f9fbc8f9253d5dc8aa5c8d0e97facb8f22db84e27b firefox-38.0-3.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce Hello All, I am very happy with this update, but it breaks language settings. My machines are installed in Dutch, so I had Bestand Bewerken Beeld in the Menu Bar. After the update We have File Edit View so the entire Preferences menu is in English as well. Is there an easy way to get this back? greetings, Johan

5 9

Re: [CentOS] Strange network failure on C6
by James B. Byrne 15 May '15

15 May '15

On Thu, May 14, 2015 16:09, Fred Smith wrote: > Hi all! > > I'm running C6 (up to date) on x86-64. have been running on the same > system for over a year. > > a couple of times lately access to the outside network has suddenly > stopped working for reasons that I didn't figure out until it happened > again yesterday. > > I had the time to fool with it, yesterday, so after quite a bit of > head-banging I found that it had no default route set up (to make this > story less long...). > On CentOs-6 you can set the default route using GATEWAY=aaa.bbb.ccc.ddd either in /etc/sysconfig/network or /etc/sysconfig/network-scripts/ifcfg-X where X is the network interface that you wish to use for default routing, usually eth0. Setting the GATEWAY value in the ifcfg-X file puts it in a place that you are likely to see far more often than /etc/sysconfig/network so the ifcfg-X file is where I usually place it. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Condor cluster setup advice (pointers) needed
by Valeri Galtsev 15 May '15

15 May '15

Dear Experts, Could someone recommend some "quick and dirty" HOWTO on condor based cluster? A did a bunch of cluster setups, I always used PBS (or torque lately). But my professor wants his to be Condor. I started reading Condor documentation, and it is vast. And quick route, like: architecture chart, and parameters I need to configure on master/submit, and compute nodes - somehow manages to escape me. I'm at a real loss now. All works well on a single machine (for quite some time already), but I am clueless about how to add compute nodes. And my web search abilities seem to have left me just on this one: all I'm able to find (together with a heap of how to submit jobs to existing thing) are a couple of "./install" based setups - whereas mine is rpm based - from their yum repository (for which they say: DO NOT USE condor_configure script, but go ahead and edit config files ... - as opposed to "./install") Any pointers anybody? Thanks a lot in advance! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

2 1

ldap host attribute is ignored
by Ulrich Hiller 15 May '15

15 May '15

Dear list members, i have installed a CentOS 7 x86_64 system. I want to let users authenticate over our ldap server. This seems to be working. ldap-username and ldap-passwords are accepted for the users configured in the ldap server. No problem. Now i want to restrict the access to users who have my centos-machine in their ldap host attribute. My problem is, that this host attribute seems to be ignored. Any ldap user, independent from the host attribute, still can login in. What could be the reason? (googling around did not lead me to a solution). The cache is already flushed. Here is my configuration: /etc/openldap/ldap.conf contains the line: ------------------------------------------ pam_check_host_attr yes /etc/sssd/sssd.conf: -------------------- [sssd] config_file_version = 2 services = nss, pam, autofs domains = default # SSSD will not start if you do not configure any domains. # Add new domain configurations as [domain/<NAME>] sections, and # then add the list of domains (in the order you want them to be # queried) to the "domains" attribute below and uncomment it. # domains = LDAP [nss] filter_groups = root filter_users = root [pam] [domain/default] ldap_uri = ldap://myldapserver.mydomain ldap_search_base = o=XXXX ldap_schema = rfc2307bis id_provider = ldap ldap_user_uuid = entryuuid ldap_group_uuid = entryuuid ldap_id_use_start_tls = True enumerate = False cache_credentials = False ldap_tls_cacertdir = /etc/openldap/cacerts/ chpass_provider = ldap auth_provider = ldap ldap_tls_reqcert = never ldap_user_search_base = ou=YYYY,o=XXXX ldap_group_search_base = ou=YYYY,o=XXXX access_provider = ldap ldap_access_filter = memberOf=ou=YYYY,o=XXXX ldap_access_order = host /etc/pam.d/system-auth: ----------------------- #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 200 quiet_success #auth sufficient pam_sss.so use_first_pass auth required pam_sss.so use_first_pass auth required pam_deny.so auth sufficient pam_unix.so try_first_pass account required pam_unix.so broken_shadow account sufficient pam_succeed_if.so uid < 2000 quiet account [default=bad success=ok user_unknown=ignore] pam_sss.so account required pam_permit.so password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type= password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_sss.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so -session optional pam_systemd.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_sss.so in /etc/nscd.conf: ------------------ enable-cache passwd no enable-cache group no enable-cache hosts no enable-cache services no enable-cache netgroup no /etc/nsswitch.conf: ................... passwd: files sss ldap shadow: files sss ldap group: files sss ldap #initgroups: files #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files sss netgroup: files sss ldap publickey: nisplus automount: files sss ldap aliases: files nisplus The ldap attributes of the user who can login, but should not: -------------------------------------------------------------- dn: uid=USER1,ou=XXXX,o=YYYY accountStatus: active objectClass: posixAccount objectClass: top objectClass: inetOrgPerson objectClass: shadowAccount objectClass: ibm-auxAccount objectClass: qmailUser objectClass: sambaSamAccount uid: USER1 uidNumber: **** shadowFlag: 0 shadowInactive: -1 gidNumber: *** shadowMin: -1 shadowMax: 999999 homeDirectory: /home/USER1 sn: USER1 mail: USER1 at my.doma.in mailHost: lmtp:unix:/var/lib/imap/socket/lmtp shadowWarning: 7 sambaSID: ***************************************** shadowExpire: -1 mailAlternateAddress: USER1a cn: surname lastname gecos: surname lastname loginShell: /bin/bash host: another-node What information is still missing? Any hint is welcome. Thank you in advance, ulrich

7 36

Re: [CentOS] [CentOS-announce] CentOS-7 disk images for AArch64 Platforms
by Always Learning 15 May '15

15 May '15

On Thu, 2015-05-14 at 14:25 -0500, Jim Perrin wrote: > We've produced a disk image intended to help hardware vendors and > enthusiasts who are interested in bringing CentOS to their AArch64 based > platform. This allows a vendor to bypass the installer or to edit the > disk image before booting in order to test kernel modules or options. It > is intended for development purposes only, and will only continue > through the alpha and beta test phases. Does this mean it may be possible to run basic version of C5, C6 and C7 on Arm64* CPU systems ? Presumably this will include the Raspberry Pi ? * Acorn Research machines; manufacturers of the BBC Models A, B, B+, Master 128 etc - those were the days. -- Regards, Paul. England, EU. Je suis Charlie.

5 8

CentOS-announce Digest, Vol 123, Issue 5
by centos-announce-request＠centos.org 15 May '15

15 May '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CentOS-7 disk images for AArch64 Platforms (Jim Perrin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 May 2015 14:25:01 -0500 From: Jim Perrin <jperrin(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CentOS-7 disk images for AArch64 Platforms Message-ID: <5554F68D.6010105(a)centos.org> Content-Type: text/plain; charset=utf-8 We've produced a disk image intended to help hardware vendors and enthusiasts who are interested in bringing CentOS to their AArch64 based platform. This allows a vendor to bypass the installer or to edit the disk image before booting in order to test kernel modules or options. It is intended for development purposes only, and will only continue through the alpha and beta test phases. ## Download http://buildlogs.centos.org/centos/7/isos/aarch64/ ## Considerations * This image is 12GB when uncompressed. Please ensure you have enough free space * The default root password is 'centos'. Please see the readme in the above directory for the kickstart used to create the image. * You will need to add the appropriate boot information in a UEFI entry after using this image, since the installer traditionally handles this. ## Burning the image to disk You may simply dd this image to disk, however for the sake of ensuring that it is written correctly, we recommend the following command. Please replace the image-name and target device with the appropriate values for your environment. ``` dd if=<image-name.img> of=/dev/sdX bs=2m conv=fsync && sync; ``` ## Growing the disk image. The root partition of this image was intentionally placed at the end of the image so that it could be easily grown. A simple command for growing the image is listed below ``` sudo sgdisk -e -d4 -n4:0:0 /dev/<your-device> ``` ## Examining and editing the image The kpartx tool is very handy for manipulating disk images. Some example commands are below. Please read the documentation for kpartx before you modify the disk image. * kpartx -l CentOS-7-1503-aarch64.img # List partitions in the image * kpartx -a -v CentOS-7-1503-aarch64.img # Add partition mappings * mount /dev/mapper/loop1p1 /mnt # mount the first partition to /mnt * umount /mnt # unmount /mnt, obviously. * kpartx -d -v CentOS-7-1503-aarch64.img # remove partition mappings -- Jim Perrin The CentOS Project | http://www.centos.org twitter: @BitIntegrity | GPG Key: FA09AD77 ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 123, Issue 5 ***********************************************

1 0

Strange network failure on C6
by Fred Smith 15 May '15

15 May '15

Hi all! I'm running C6 (up to date) on x86-64. have been running on the same system for over a year. a couple of times lately access to the outside network has suddenly stopped working for reasons that I didn't figure out until it happened again yesterday. I had the time to fool with it, yesterday, so after quite a bit of head-banging I found that it had no default route set up (to make this story less long...). An appropriate route command "fixed" it and all was well, but... I had rebooted several times, among other drastic actions, such as rebooting the router and cable modem, and none of those things helped. so whatever it was that lost the default route was persistent across boots, while the manual route command to re-add it was NOT persistent across boots. At some point in fooling with it, I did something--and right now I have no idea what it was--that suddenly caused routes to persist across boots. I know I did not change any of /etc/sysconfig/network*, but I did look at them and saw that ifcfg-eth0 DID contain a line for default route, even though the route command did not reflect it. So, if anyone has any good guesses on what the heck happened here, I'd like to hear them. thanks in advance! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. ------------------------------- Romans 5:8 (niv) ------------------------------

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss