- Discuss - lists.centos.org

mirror.centos.org is no longer resolved by DNSes !!!
by Bernard Lheureux 13 Feb '14

13 Feb '14

Is it a temporary situation, because Yum no longer resolves this adress, then yum update fails... -- (°- Bernard Lheureux Gestionnaire des MailingLists ML, TechML, LinuxML //\ http://www.bbsoft4.org/Mailinglists.htm ** MailTo:root@bbsoft4.org v_/_ http://www.bbsoft4.org/ <<<<<< * >>>>>> http://www.portalinux.org/

4 6

MySQL Can't create file '/tmp/#sql2e0_98_0.frm' (errno: 9) problem
by Ljubomir Ljubojevic 13 Feb '14

13 Feb '14

Hi. I have a strange problem. I installed cacti, and set it up. When I click on the Plugins Management, I noticed Error "FATAL: Database or Table does not exist" Further testing revealed that at the moment MySQL can not create temporary files in /tmp. It is same for ANY database! SELinux is disabled. I logged to mysql as root and error is same. Command used is: CREATE TEMPORARY TABLE IF NOT EXISTS plugin_temp_table LIKE bak_menu; Error is: ERROR 1004 (HY000): Can't create file '/tmp/#sql21f8_f3_0.frm' (errno: 9) What could be the problem, any idea how to proceed? I do not think I edited any MySQL setting. -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant

3 6

Re: [CentOS] Centos 5.10 Firefox 24.3.0 HTML OL
by Always Learning 13 Feb '14

13 Feb '14

On Thu, 2014-02-13 at 10:35 +0100, Reindl Harald wrote: > Am 13.02.2014 04:13, schrieb Always Learning: > > Suppose I will have to locate all <ol type ....> and manually changed > > them :-( I just wish HTML and the browsers would remain stable! > or you could have moved to CSS 10 years ago instead > http://www.w3schools.com/cssref/pr_list-style-type.asp => ul.circle {list-style-type:circle} => ul.square {list-style-type:square} => ol.upper-roman {list-style-type:upper-roman} => ol.lower-alpha {list-style-type:lower-alpha} Thank you for your very suggestion. I shall enthusiastically explore it. Every day I continue to learn. -- Paul. England, EU. Our systems are exclusively Centos. No Micro$oft Windoze here.

1 0

CentOS-announce Digest, Vol 108, Issue 8
by centos-announce-request＠centos.org 13 Feb '14

13 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0162 CentOS 6 libvirt-cim Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 12 Feb 2014 12:25:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0162 CentOS 6 libvirt-cim Update To: centos-announce(a)centos.org Message-ID: <20140212122537.GA20145(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0162 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0162.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ef79c6310753b70a2b1a6b1f5bc7cee807bdc87e89968e3e6e74712110aa3080 libvirt-cim-0.6.1-9.el6_5.1.i686.rpm x86_64: ef79c6310753b70a2b1a6b1f5bc7cee807bdc87e89968e3e6e74712110aa3080 libvirt-cim-0.6.1-9.el6_5.1.i686.rpm 8598cbd0a5cc00198409c5ad796b3702a584229b1b413a740db2a2d844bc28cf libvirt-cim-0.6.1-9.el6_5.1.x86_64.rpm Source: 48e8b5fa2f4d288d742bb190a4b434f11a12d213c7c1b43c6fd7ba456c356548 libvirt-cim-0.6.1-9.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 8 ***********************************************

1 0

OpenDJ - and Centos Auth
by Ganesh Hariharan 13 Feb '14

13 Feb '14

All, I have a working OpenDJ with SSL enabled and have also added users to it.... Now, I am unable to authenticate my linux box to OpenDJ LDAP server, either from login prompt or ssh... I understand sssd is the latest program which does this configuration and I have that configured... though there is lot of howtos which google get, still there is clear documentation that I can find to perform the auth.. Please help Regards G

2 2

Centos 5.10 Firefox 24.3.0 HTML OL
by Always Learning 13 Feb '14

13 Feb '14

Firefox used to render <ol type="a"> <li>.................</li> as a. ............... Now it does not. The HTML 4.1 spec at http://www.w3.org/TR/html401/struct/lists.html#type-values says use CSS instead. These <ol type="a"> <ol type="A"> <ol type="i"> used to work in the Centos 5 supplied Firefox. Now OL produce digits instead. http://www.w3schools.com/tags/att_ol_type.asp states "Differences Between HTML 4.01 and HTML5 The type attribute of the <ol> element is no longer deprecated in HTML5." If something is "deprecated" it is supposed to work until it is withdrawn or cancelled. Is Firefox's inability to render <ol type="a"> a bug or a very annoying irritation especially as I have hundreds of hand-coded pages using it ? :-( -- Paul. England, EU. Our systems are exclusively Linux. No Micro$oft Windoze here.

2 4

Speaking of firefox...
by m.roth＠5-cent.us 12 Feb '14

12 Feb '14

The latest version seems to have a bug. One of my users went to look at a paper in Phy Rev E, and the firefox pdf view looked fine... but what printed had garbage for scales on the graphs. Then I had him use the firefox print preview... and it was garbage. Looked at it on my system, ditto, and firefox was updated yesterday on all our systems. Save as (why isn't there an "open"?) a .pdf, pull it up in acroread, and print, and everything's fine. mark

7 11

Perl516 SCL modules
by Nicole Hähnel 12 Feb '14

12 Feb '14

Hi, I'm trying to build several SCL perl516 modules for using assp spamfilter. Some modules have dependencies which spend a lot of errors or can not be build on a x86_64 system. perl-Email-Valid-0.184 for example needs Win32::IPHelper and Win32::TieRegistry. If I build this rpm for standard perl510, the Win32 modules are not required. Why are theses dependencies only for perl516? Can I exclude the Win32 modules without getting problems? Does anyone have a few tips? Thanks in advance! Kind regards, Nicole

3 7

Where to get Sernet-Samba4 questions answered?
by James B. Byrne 12 Feb '14

12 Feb '14

Not wanting to build Samba4 myself I spent some time searching for rpm packages suitable for use on our CentOS-6.5 hosts. I discovered http://enterprisesamba.com/ which provides rpms (sernet-samba-4.1.4-7) for CentOS-6. However, I cannot find an online support community for this package and requests for help made to the samba.org list have met with absolute silence. Since my requests had to do with uncaught exceptions with stack traces and PANICs in samba-tools I can only infer from the silence that that list does not handle support enquires from anyone that does not build their own Samba4 from source. I have been to sernet.de which builds the rpms and the site is in German, a language I have not used in over twenty years and which I never read very well. It refers to EnterpriseSamba.com but that site in turn provides no reference to an online support community of users. So, I need help and I need some guidance as to where to go get it. Does anyone here use the same packages for their Samba setups? Does anyone know of an online support group for users of this particular package? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 4

CentOS-announce Digest, Vol 108, Issue 7
by centos-announce-request＠centos.org 12 Feb '14

12 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0158 CentOS 6 nss Update (Johnny Hughes) 2. CESA-2014:0159 Important CentOS 6 kernel Update (Johnny Hughes) 3. CESA-2014:X005 Moderate Xen4CentOS kernel Security Update (Johnny Hughes) 4. CESA-2014:X004 Moderate Xen4CentOS xen Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 11 Feb 2014 13:28:45 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0158 CentOS 6 nss Update To: centos-announce(a)centos.org Message-ID: <20140211132845.GA62118(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0158 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0158.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 310b1aeb6a141060d8d5aa9ae5917f22af5d6772b3c1b38095469dfc7c92ba39 nss-3.15.3-6.el6_5.i686.rpm 70eebce630134280c4bdef73fa1bb3e516b2a268256cc8aa4bce3757388952ec nss-devel-3.15.3-6.el6_5.i686.rpm 6017281dc055f29ea81b7f6efa07854552925b06b570eb7b013b293150d3acc2 nss-pkcs11-devel-3.15.3-6.el6_5.i686.rpm 340e367a0e67787cf4491770b15830f5eddef223633c59dc774146f107d129ab nss-sysinit-3.15.3-6.el6_5.i686.rpm 681e59d442c114390f28b3f0ef289427ecc0f1607dc5f11fbabe05e95df034cf nss-tools-3.15.3-6.el6_5.i686.rpm x86_64: 310b1aeb6a141060d8d5aa9ae5917f22af5d6772b3c1b38095469dfc7c92ba39 nss-3.15.3-6.el6_5.i686.rpm 40f8a4da558a0040ed9cf85ad4e3c93b2fec47360b95b0b134c4635b7b986635 nss-3.15.3-6.el6_5.x86_64.rpm 70eebce630134280c4bdef73fa1bb3e516b2a268256cc8aa4bce3757388952ec nss-devel-3.15.3-6.el6_5.i686.rpm 0d12c2cc1b8d78bb0c9124d9afdb4eeabf56651fe5c079703aaf9e4ebfeae517 nss-devel-3.15.3-6.el6_5.x86_64.rpm 6017281dc055f29ea81b7f6efa07854552925b06b570eb7b013b293150d3acc2 nss-pkcs11-devel-3.15.3-6.el6_5.i686.rpm 733075233b68de52267f1a0deb419028c571097b2e03e7d0470d61eb5ebd1115 nss-pkcs11-devel-3.15.3-6.el6_5.x86_64.rpm 5825c6b6c0565442f17cc125dbe3576b8deacc3d2d37fe18ae16cefa7fb9a4b3 nss-sysinit-3.15.3-6.el6_5.x86_64.rpm 868a02e6cadd7af1f1f10f870e7bf11567193bee559d2c41d4b4f3f84df0c9ed nss-tools-3.15.3-6.el6_5.x86_64.rpm Source: a6b663df279af7dc05d9d57e385adfb8f9610d37ea42480159e3f9742e37081e nss-3.15.3-6.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 12 Feb 2014 04:44:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0159 Important CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20140212044455.GA12265(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0159 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0159.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ea97a65892db65c6440909e7c1aae72f7a4967dd40acd6b7083efb669675f82e kernel-2.6.32-431.5.1.el6.i686.rpm f414c76e5f917e64ec06d58569819668de317f6bdf4fa664319798fc1d9c700b kernel-abi-whitelists-2.6.32-431.5.1.el6.noarch.rpm a8cc1be550eb37e7aa87952f47f35d09cff9320d70d0a6ed5d94ebbbdb174814 kernel-debug-2.6.32-431.5.1.el6.i686.rpm f46b9c2dc6b943b4d8584355af74dce5efd26259b57f430e255bb8043961d168 kernel-debug-devel-2.6.32-431.5.1.el6.i686.rpm aed0d4d4c5a8a18ac976a6051aa071c6203ff81f33a1b90f4f969cbf268c82fb kernel-devel-2.6.32-431.5.1.el6.i686.rpm 86b38a37649d74ca4f8b32008c0c4b00fde9a992fbc6173b264e170101f5566c kernel-doc-2.6.32-431.5.1.el6.noarch.rpm c60c4e980136fd64f8073323af857c202a61e80a26b39949403f2f5c2ca2dbf6 kernel-firmware-2.6.32-431.5.1.el6.noarch.rpm 06eadc863ceaa33cb1b7d46ca6d752e877a9cbb7084b8a6ba4c924117d4d1eb0 kernel-headers-2.6.32-431.5.1.el6.i686.rpm 27bfc9e2e9d158d55e174ee22d1e4475c56e210528403f57064c455dbca05839 perf-2.6.32-431.5.1.el6.i686.rpm 6ccf0df7199af6008649ba4ebbf24e8f6989246b397d1b67fb14cb845ef965a8 python-perf-2.6.32-431.5.1.el6.i686.rpm x86_64: 6fb4e540cf0a38a3881671c7097c4f2400986200959a51a5cd811c34c8780343 kernel-2.6.32-431.5.1.el6.x86_64.rpm f414c76e5f917e64ec06d58569819668de317f6bdf4fa664319798fc1d9c700b kernel-abi-whitelists-2.6.32-431.5.1.el6.noarch.rpm 422caa7fce83f70f1ce9e0104141d6b4f30cfeb9e54048001cdf5da93f0263d6 kernel-debug-2.6.32-431.5.1.el6.x86_64.rpm 21378f0499d012d533fdaf5701d0096df8dac620395fc243abcae1c2ce1d6a08 kernel-debug-devel-2.6.32-431.5.1.el6.x86_64.rpm 601578e4bc4e13e821fb2706f4ce2be79bb94af7d07ba42bd66afafddd9e50a9 kernel-devel-2.6.32-431.5.1.el6.x86_64.rpm 86b38a37649d74ca4f8b32008c0c4b00fde9a992fbc6173b264e170101f5566c kernel-doc-2.6.32-431.5.1.el6.noarch.rpm c60c4e980136fd64f8073323af857c202a61e80a26b39949403f2f5c2ca2dbf6 kernel-firmware-2.6.32-431.5.1.el6.noarch.rpm d8926d4740630dad9f1837eee89a242a4b59961e7dadbae3c38fa6a9bdbcca30 kernel-headers-2.6.32-431.5.1.el6.x86_64.rpm 6b821263e676e6b802988076d6d002f7ffd6816ad1fcbbabb281423c59882182 perf-2.6.32-431.5.1.el6.x86_64.rpm bb6c8c891e9893c3c8b8f3802e2317fccfbb0859c53060e97fc184dffd7dd4eb python-perf-2.6.32-431.5.1.el6.x86_64.rpm Source: 0139e1b4e74e3305354b5e27bf77f8c5944c20b7fe0e99f353ce69cced17c5a3 kernel-2.6.32-431.5.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 12 Feb 2014 05:03:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:X005 Moderate Xen4CentOS kernel Security Update To: CentOS-announce(a)centos.org Message-ID: <20140212050332.GA15422(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:X005 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 4d780927c1273021f707954531d4f8363f96001a09101ac3b828c02dcf640fc5 e1000e-2.5.4-3.10.29.2.el6.centos.alt.x86_64.rpm 8665f64a64ba10ff731077eb7a25a1eb282cf46739d9d18383d07da7131833aa kernel-3.10.29-11.el6.centos.alt.x86_64.rpm e66b9c91d42024a4af3752d557a2e0c8fe4c7f2026f9b4a9eea0a500cfc0da4b kernel-devel-3.10.29-11.el6.centos.alt.x86_64.rpm ce7481db6e7b8c1bca4a104c8bfcdfaa3e8e2334b7ae430c2246685f61ae2b81 kernel-doc-3.10.29-11.el6.centos.alt.noarch.rpm f3308009ccd8565b5465b8215676c4267e1112abf726404f0553ffc058b3ea56 kernel-firmware-3.10.29-11.el6.centos.alt.noarch.rpm c5d1a5429a03f2be7dd14865ef5bd8595e5d2691a4d00b4065cbbddddc0b6d6d kernel-headers-3.10.29-11.el6.centos.alt.x86_64.rpm 9dbd0fecce020f0a2b979500ec56ca2c134b6f7c9885133ce31a5fb811f5cd33 perf-3.10.29-11.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- daacfa96cd99b7d61e4c020b7c92e2039e8867b0cc0d2c0b8a7ecd9b0d251bcb e1000e-2.5.4-3.10.29.2.el6.centos.alt.src.rpm 447c3e834e97b7c4a4b872663a576eef0a984869f6e2fdb06334301f197c1dfe kernel-3.10.29-11.el6.centos.alt.src.rpm ===================================================== Kernel Changelog info from the SPEC file: * Tue Feb 11 2014 Johnny Hughes <johnny(a)centos.org> - 3.10.29-11 - upgrade to upstream 3.10.29 - addresses CVE-2014-0038 and CVE-2013-6885 e1000e Changelog info from the SPEC file: * Tue Feb 11 2014 Johnny Hughes <johnny(a)centos.org> - 2.5.4-3.10.29.2.el6.centos.alt - build against version 3.10.29 kernel ===================================================== The following kernel changelogs are available from kernel.org since the previous kernel: https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.29 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.28 ===================================================== The following security issues are addressed in this update: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-0038 http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-6885 ===================================================== NOTE: You must run /usr/bin/grub-bootxen.sh to update the file /boot/grub/grub.conf (or you must update that file manually) to boot the new kernel on a dom0 xen machine. See for info: http://wiki.centos.org/HowTos/Xen/Xen4QuickStart -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 4 Date: Wed, 12 Feb 2014 05:03:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:X004 Moderate Xen4CentOS xen Security Update To: CentOS-announce(a)centos.org Message-ID: <20140212050353.GA15436(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:X004 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- bb6f3ba6c19f731b233c6c0ec338f9b92f418664dc1fd4f31ddc2e3ee2848583 xen-4.2.3-28.el6.centos.alt.x86_64.rpm e1ba3b17464f8992bc81c861826bb03f1a46f7421872abb138d30317fec5e880 xen-devel-4.2.3-28.el6.centos.alt.x86_64.rpm b308ef85354cba806ae30a54466f66c95bea81937a9ac4fe58434750f2089d76 xen-doc-4.2.3-28.el6.centos.alt.x86_64.rpm 0bc067a9225953b3034e8adc285e82931be1f61fe832a910391f773bfee75e9e xen-hypervisor-4.2.3-28.el6.centos.alt.x86_64.rpm 96c44ad669efe2c7315f8b2bebec7be559d5557d381cb8015667a494367aaa96 xen-libs-4.2.3-28.el6.centos.alt.x86_64.rpm b33ef015bab2a1381ed0cba9300313fdbda2c00e0241c93f99025b79820d0b7e xen-licenses-4.2.3-28.el6.centos.alt.x86_64.rpm 89de11af00731b0ad158b544967724c27bc6f43c71f035bb76d3f12b6500577f xen-ocaml-4.2.3-28.el6.centos.alt.x86_64.rpm 9ec958a4bd8c80fcff5121fc30b63874f3854a9a3f81f0a4441c35017f97bd41 xen-ocaml-devel-4.2.3-28.el6.centos.alt.x86_64.rpm 2abf9c625ee014646760bea77c7cd376db73ee4a11a28226004c2fc6f003c3ef xen-runtime-4.2.3-28.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 252cbc61a5ad6360fdb675d7ba95d09585f9b5cb3af7d68c47229cad7c103bb0 xen-4.2.3-28.el6.centos.alt.src.rpm ===================================================== xen Changelog info from the SPEC file: * Tue Feb 11 2014 Johnny Hughes <johnny(a)centos.org> - 4.2.3-28.el6.centos - Roll in Patches 153, 154, and 155 XSA-84 (CVE-2014-1891, CVE-2014-1892, CVE-2014-1893, CVE-2014-1894) XSA-85 (CVE-2014-1894), XSA-86 (CVE-2014-1896) ===================================================== The following XSA info is available from the Xen site http://xenbits.xen.org/xsa/advisory-84.html http://xenbits.xen.org/xsa/advisory-85.html http://xenbits.xen.org/xsa/advisory-86.html -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 7 ***********************************************

1 0

password problems new centos 6.4 install and sl63 install.
by g 12 Feb '14

12 Feb '14

greetings, a previous install and updated centos 6.4 from dvd 1 x86_64 got trashed. not sure of cause. no big deal. install practice never hurts. :-) now, installation is: CentOS-6.4-x86_64-bin-DVD1.iso installed as; CentOS (2.6.32-358.el6.x86_64) - root (hd1,2) SL-63-i386-2012-08-24-LiveCD.iso installed and updated as; Scientific Linux (2.6.32-431.1.2.el6.i686) - root (hd1,5) /dev/sdb5 /home after initial install of c6.4, second install phase went well. rebooted and checked boot up 3 times, all with successful logins. needed some kde configuration information from sl63, rebooted, selected sl63, boot ok. when tried to login to kde, user 'geo' password refused and user 'root' password refused. booted sl-62-i386 install dvd in rescue mode; chroot /mnt/sysimage passwd root passwd geo exit exit reboot login to sl63 as 'geo' and 'root' ok. ran email, ran some web work. rebooted to centos, 'geo' and 'root' passwords refused, tried twice, booted centos dvd-1 in rescue mode, made same entries as with sl62. rebooted to c64, login to c64 as 'geo' and 'root' ok. rebooted to sl62, tried to login as 'geo' and 'root', nfw, refused. it is now a continuous cycle of repeating of above. any and all help, ideas, suggestions, will be greatly appreciated. tia. -- peace out. in a world with out fences, who needs gates. tc.hago. g .

1 1

off NM problem [low priority]
by Fred Smith 12 Feb '14

12 Feb '14

On Centos 6.5, I use NM to bring up the VPN to my office, and to disconnect from it. every now and then I screw up and disconnect the LAN itself instead of the VPN. once I do that, even after reconnecting to the LAN I'm hosed. /etc/resolv.conf hasn't been put back to the non-VPN version, so I manually fix that. but even then I can't get any name resolution. I'm sure that rebooting IS NOT the right answer, but it's the only one I've come up with that solves the problem. What should I be doing instead, once the system is in this state? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "Not everyone who says to me, 'Lord, Lord,' will enter the kingdom of heaven, but only he who does the will of my Father who is in heaven." ------------------------------ Matthew 7:21 (niv) -----------------------------

3 4

OpenVPN problem
by Timothy Murphy 12 Feb '14

12 Feb '14

I'm having problems communicating with a remote server, with openvpn. I can link with ssh ok, but the link stalls when viewing any but the smallest texts. I tried reducing the tun0 MTU, though only from 1500 to 1400, but this seemed to have no effect. Before trying a larger reduction, I'd like to clarify two points. Firstly, is it necessary to re-boot the remote machine for the change in MTU to come into effect? Or is it sufficient to re-start the openvpn service? (I'm reluctant to re-boot the remote machine unless it is essential.) Secondly, must the MTU be changed at both ends? Any info on these two points gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

5 9

odd mcelogd problem
by m.roth＠5-cent.us 11 Feb '14

11 Feb '14

CentOS 6.4, 2.6.32-358.11.1.el6.x86_64 (And no, I can't just upgrade - the users have to be sure that the computational results will be correct....) It's throwing ECC errors. Trying to start mcelogd, first it said nothing. Restart told me "Please load edac_mce_amd module." I did a modprobe edac_mce_amd, and lsmod tells me it's in. But now service mcelogd restart Stopping mcelog Starting mcelog daemon [FAILED] AMD Processor family 16: Please load edac_mce_amd module. [FAILED] And in messages, mcelog: CPU is unsupported#012: Success "Success"? Anyone have any ideas what I'm missing; why I've loaded what it says it needs, and it still thinks it needs it? mark

2 1

Re: [CentOS] Where to get Sernet-Samba4 questions answered?
by James B. Byrne 11 Feb '14

11 Feb '14

On Tue, February 11, 2014 14:31, Chris wrote: > Dear James, > > On 02/11/2014 05:57 PM, James B. Byrne wrote: >> Not wanting to build Samba4 myself I spent some time searching for rpm >> packages suitable for use on our CentOS-6.5 hosts. I discovered >> http://enterprisesamba.com/ which provides rpms (sernet-samba-4.1.4-7) for >> CentOS-6. > > you have to sign up at https://portal.enterprisesamba.com/ > > This page is in English and it's free. > > Then you can download the CentOS -Version or add a yum repository. > > - Chris > You misunderstand. I registered at EnterpriseSamba in the belief (prehaps mistaken) that this was the Samba project core team's public 'brand'. I have the sernet-samba rpm installed already. I also have the sernet-Samba-ad service running and promoted to a DC on my existing AD Domain already. >From what I can discover sernet-samba-4.1.4 seems to mostly work. I just lack the experience to give me confidence in committing to Samba in place of our existing W2K AD DC. Eroding what confidence I do have is that I have encountered a number of issues where the samba-tool utility simply breaks and gives what appears to be an abbreviated a stack trace along with some pretty startling error messages, containing words like "PANIC" and "unhandled exception". For that reason I have subscribed to the Samba mailing list. I get the message traffic from that list. And I have received my own messages to the list back as well as see them in the list archives as well, thus confirming that my messages were delivered. What I am unable to do is to get any response to any of the questions I have posted respecting the errors I have encountered. I get nothing. It is as if I had never written. So, I am seeking an alternative support venue, if such exists, where I might get some answers. If there is none then I will simply re-post my original messages to the samba list until I get some sort of response, even if it is only an expression of irritation. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Re: [CentOS] And then there was one (browser)
by James B. Byrne 11 Feb '14

11 Feb '14

On Sat, December 21, 2013 16:54, Peter wrote: > On 12/22/2013 09:00 AM, Scot P. Floess wrote: >> >> as much as I hate to admit it, I'm not sure what mono/moonlight are... > > Linux implementation of Microsoft .net and Silverlight respectively. > Silverlight was supposed to be Microsoft's answer to flash which never > really took off except in some high corporate and government situations > where some PHB was tricked into it by a Microsoft salesman. > > Both mono (and as an extension moonlight) are spearheaded by Novel with > "support" from Microsoft, which means it will almost work but not quite. > Were spearheaded, not are spearheaded. Novel is long gone from the picture. Presently Mono is a Ximian project (http://www.mono-project.com) which is where it started as far as I can recall. To the best of my knowledge Moonlight recently was resuscitated after having near death experience but, at the moment, is SUSE only as far as Linux support goes. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

7 13

Centos-compatible motherboards
by Fred Smith 11 Feb '14

11 Feb '14

Hi all! I'm toying with the idea of spending some Christmas money on a new MB and CPU to upgrade my desktop. Although I've always been partial to AMD chips, I'm tempted this time to find something Intel-ish, I5, quad core, or so. In looking at mommyboards at New Egg and Amazon, I find so many I am unable to make reasonable determinations regarding suitability, so am hoping some of you who have new(ish) intel-compatible boards could offer some hints. Also, I'd like to keep the cost of MB, CPU and RAM to no more (or little more) than $300-350. (seeing as how apparently mid-range I5 chips cost over 200 each, that may be a vain hope.) I expect that the newest ones may work with something bleeding edge like Fedora (et al), but I like centos for my desktop since it doesn't have the ridiculous churn rate of the more aggressive distros. I can't bring myself to relish the thought of rebuilding my main desktop twice a year (or even once a year). So, any suggestions will be greatly appreciated! Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord detests the way of the wicked but he loves those who pursue righteousness. ----------------------------- Proverbs 15:9 (niv) -----------------------------

10 33

usb umts stick recommendation for centos 6
by Rainer Traut 11 Feb '14

11 Feb '14

Hi, we have a DSL outage in our office, which will last for one week. So I have to use an usb umts stick, can someone recommend a stick / provider for germany? Maybe which works out of the box? I know O2 has explicit Linux support but only Fedora 16 and up.... Thx Rainer

1 0

CentOS-announce Digest, Vol 108, Issue 6
by centos-announce-request＠centos.org 11 Feb '14

11 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2014:0143 CentOS 6 ImageMagick Update (Johnny Hughes) 2. CESA-2014:0151 Low CentOS 6 wget Update (Johnny Hughes) 3. CEBA-2014:0153 CentOS 6 resource-agents Update (Johnny Hughes) 4. CEBA-2014:0156 CentOS 6 lftp Update (Johnny Hughes) 5. CEBA-2014:0157 CentOS 6 netcf Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 10 Feb 2014 15:33:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2014:0143 CentOS 6 ImageMagick Update To: centos-announce(a)centos.org Message-ID: <20140210153312.GA39093(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:0143 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-0143.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f6660a4dcb6d726fc5fef79a36fcfe27123de6176b5057a4e171293d01640dbb ImageMagick-6.5.4.7-7.el6_5.i686.rpm 5b61fc46468548145318f96bd4fe33b84e42aa44e8f45f500f31f7d8e960aa45 ImageMagick-c++-6.5.4.7-7.el6_5.i686.rpm 3bb9183b514f9bc94e0c495786bb8df72411e4ddaacba9711e73289c1992c2f0 ImageMagick-c++-devel-6.5.4.7-7.el6_5.i686.rpm 089fd16ea8723a97dc60dfd31680af620bbc9812aa1cd795b0be3930d95234fd ImageMagick-devel-6.5.4.7-7.el6_5.i686.rpm 5290c7055f123bf25381ce138de8c47f78f27b014dcb266bbd7e636ff309a5e6 ImageMagick-doc-6.5.4.7-7.el6_5.i686.rpm 094d6062ec15ceb7ab8f8277c12e2dda14508c8b0901a35461e50cbadccd3276 ImageMagick-perl-6.5.4.7-7.el6_5.i686.rpm x86_64: f6660a4dcb6d726fc5fef79a36fcfe27123de6176b5057a4e171293d01640dbb ImageMagick-6.5.4.7-7.el6_5.i686.rpm e841745fdbc0935a8245c4978d7e0e0486cfc633d59086c7751d764abaa586cf ImageMagick-6.5.4.7-7.el6_5.x86_64.rpm 5b61fc46468548145318f96bd4fe33b84e42aa44e8f45f500f31f7d8e960aa45 ImageMagick-c++-6.5.4.7-7.el6_5.i686.rpm 93665d5c42b69ddaa4fa74800ed6f09b74ffeec4711fa4ceeca979f0d6a4a706 ImageMagick-c++-6.5.4.7-7.el6_5.x86_64.rpm 3bb9183b514f9bc94e0c495786bb8df72411e4ddaacba9711e73289c1992c2f0 ImageMagick-c++-devel-6.5.4.7-7.el6_5.i686.rpm b1a1e34484d64a1e86c3185a951dccd3a0fa530c5a27d20581eb9f3ea97c552b ImageMagick-c++-devel-6.5.4.7-7.el6_5.x86_64.rpm 089fd16ea8723a97dc60dfd31680af620bbc9812aa1cd795b0be3930d95234fd ImageMagick-devel-6.5.4.7-7.el6_5.i686.rpm c454e04900332b25e9e1da2d20997efe7392d61ce18d9d299e025b4932e91722 ImageMagick-devel-6.5.4.7-7.el6_5.x86_64.rpm 2705206abb253e52a5444724084192db42c534bcb30f09ffa89a9fcb0fc255a7 ImageMagick-doc-6.5.4.7-7.el6_5.x86_64.rpm 12288ee64c75ca9d6b8a08ca3ef5b9e1c5f91b1b5b755628ae6b2d6d81c265dc ImageMagick-perl-6.5.4.7-7.el6_5.x86_64.rpm Source: e86199c1562a2a74a3088db02a8651a5adb5d60ac374994ee708f6c2633a5d69 ImageMagick-6.5.4.7-7.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 11 Feb 2014 10:54:14 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0151 Low CentOS 6 wget Update To: centos-announce(a)centos.org Message-ID: <20140211105414.GA54166(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0151 Low Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0151.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4d992f22dbcf380e7c2e0eb0ba0fa29da4b5a5261abf85bb05fff16551aa2df9 wget-1.12-1.11.el6_5.i686.rpm x86_64: 38bd17293302d51962dfd700f4072520bb5e308708d9c027084eeb4029769f75 wget-1.12-1.11.el6_5.x86_64.rpm Source: 8fbab2856b3acc9c23103bd033dc310ad7c3023df5a1c07a2a01d93348434d84 wget-1.12-1.11.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 11 Feb 2014 10:55:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0153 CentOS 6 resource-agents Update To: centos-announce(a)centos.org Message-ID: <20140211105517.GA54391(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0153 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0153.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 11d26e1e6db52dda262d2e06a2ddd742ca48e349519306158d4c118429ae38d5 resource-agents-3.9.2-40.el6_5.6.i686.rpm 5662d6eebd6a886bf7f33da7dbccb97306e6f12e40e99dda7b68e061d9f23048 resource-agents-sap-3.9.2-40.el6_5.6.i686.rpm x86_64: 1394b8594d546cfb238312b101bbea4411748e3014085538c35f7e402693ee31 resource-agents-3.9.2-40.el6_5.6.x86_64.rpm de9d26e837a7da662fb2c38229fa3e7160f0c5063a2a10775354cc4213b28984 resource-agents-sap-3.9.2-40.el6_5.6.x86_64.rpm Source: 8baea928b40e1482bef954bdb9399e283100ff6eaeb356aa612b524d75041004 resource-agents-3.9.2-40.el6_5.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 11 Feb 2014 10:55:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0156 CentOS 6 lftp Update To: centos-announce(a)centos.org Message-ID: <20140211105548.GA54607(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0156 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0156.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0fa29e430e78f3df7739ae7534a61e7534da5f0f1f1435909fe9c3fed39c02c2 lftp-4.0.9-1.el6_5.1.i686.rpm 14afd576b489a45446911c0672f733b0ba03435a22d4362849915d173e5226bb lftp-scripts-4.0.9-1.el6_5.1.noarch.rpm x86_64: 0fa29e430e78f3df7739ae7534a61e7534da5f0f1f1435909fe9c3fed39c02c2 lftp-4.0.9-1.el6_5.1.i686.rpm a8473e500ae4a71bd27efed005b254913970387be2793cb13e7c85032a85cf98 lftp-4.0.9-1.el6_5.1.x86_64.rpm 14afd576b489a45446911c0672f733b0ba03435a22d4362849915d173e5226bb lftp-scripts-4.0.9-1.el6_5.1.noarch.rpm Source: 705d85d9c5ccf5ce86634916166884e2698307f3be1a36be34cef20e1526cb6f lftp-4.0.9-1.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 11 Feb 2014 11:08:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0157 CentOS 6 netcf Update To: centos-announce(a)centos.org Message-ID: <20140211110853.GA57627(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0157 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0157.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: faea977d1108bedc8cd8711ee021e874d8870d443444098fec39c4e2ecabe413 netcf-0.1.9-4.el6_5.2.i686.rpm c54bb05f6fbf1d892677b46201976e2a513967adc82fd1b2f50e3e3e4b99dcec netcf-devel-0.1.9-4.el6_5.2.i686.rpm 356e6d41846aabd36e7c64ba55b634292f1359150be135cd518a9645541a0e1d netcf-libs-0.1.9-4.el6_5.2.i686.rpm x86_64: 823f19b0c0e52b801f635ab2f45b456e2a5970e9a0d6fd99a52fa94982c509e8 netcf-0.1.9-4.el6_5.2.x86_64.rpm c54bb05f6fbf1d892677b46201976e2a513967adc82fd1b2f50e3e3e4b99dcec netcf-devel-0.1.9-4.el6_5.2.i686.rpm acc8e94383c34cc4373caada905faacf82af1e568d76150557feea9d9cf9402f netcf-devel-0.1.9-4.el6_5.2.x86_64.rpm 356e6d41846aabd36e7c64ba55b634292f1359150be135cd518a9645541a0e1d netcf-libs-0.1.9-4.el6_5.2.i686.rpm 07c5ea804278811bf125116530db0e2076b0791953d138e3f2ba9dd3f592f6cc netcf-libs-0.1.9-4.el6_5.2.x86_64.rpm Source: bfbb05a1f89a90919207350631a5000f21c95efd1bbb5be720d58f216a4c52de netcf-0.1.9-4.el6_5.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 6 ***********************************************

1 0

A puzzle with grub-install
by Timothy Murphy 11 Feb '14

11 Feb '14

I ran into a problem when using grub-install experimentally in what is obviously a foolish way, since I was unable to boot the machine afterwards. I got round the problem, as I shall explain, but I'm still interested to know why the problem arose. Having added a second hard disk to my CentOS-6.5 server, as an experiment I gave the command grub-install /dev/sdb after checking (with fdisk) that the new disk was indeed sdb, while the disk on which CentOS is running remains sda. I assumed that this would leave the MBR on sda unchanged, so that I would be able to boot to the current system as before. But I found that this was not the case; on rebooting the machine hung, with a repeating "-" on the screen. The only way I was able to recover the current system was to use a CentOS Live USB stick I had to install CentOS on a spare partition (sda12). With that system running I was able to mount the old system (on sdb10) as /mnt, and the boot partition (sdb2) as /mnt/boot, and then give the command grub-install --root-directory=/mnt /dev/sda On re-booting the old system came up. (I may say I also tried to run grub-install from the USB stick, but was completely unable to do this so as to re-install the old system. Basically, the old disk had become sdb, while the USB stick was sda. So I mounted /dev/sdb10 as /mnt and /dev/sdb2 as /mnt/boot, and gave the command grub-install --root-directory=/mnt /dev/sdb I then removed the USB stick, and tried - unsuccessfully - to re-start the machine.) But I'm puzzled by my experience, which seems to suggest that running grub-install /dev/sdb actually affects the MBR on sda. Or have I misunderstood in some way? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

2 1

OT hard disk geometry
by Timothy Murphy 10 Feb '14

10 Feb '14

My only excuse for asking this question here is that I am running CentOS-6.5 on my HP MicroServer. I recently purchased a 2TB WD hard drive (WD20ESRX), and was surprised to find that the power-connector on this drive did not seem to be in the correct place for the drive-bay. (The drive bay closes, but the disk does not spin.) The power connector on the drive is further from the SATA connectors than on the other 4 drives I have in my two MicroServers - it is about 2/3 of the way across the back of the drive, on the opposite side to the SATA connectors. I'm surprised because I always thought that the positions of the connectors on SATA hard drives was standard. How can I find whether or not a hard drive will connect properly in the drive-bay? Was I unlucky to choose a drive that did not fit? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

5 7

conntrack-tools not in 6.4
by Steve Clark 10 Feb '14

10 Feb '14

HI List, Did I miss something? I have 6.2 system that has conntrack-tools conntrack-tools.i686 1.0.0-1.el6 @anaconda-CentOS-201112130233.i386/6.2 But I can't seem to find conntrack-tools for 6.4 yum install conntrack-tools Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: mirror.umd.edu * elrepo: repos.mia.lax-noc.com * epel: mirror.cogentco.com * extras: mirror.fdcservers.net * rpmforge: mirror.teklinks.com * updates: mirror.wiredtree.com Setting up Install Process No package conntrack-tools available. Error: Nothing to do # cat /etc/redhat-release CentOS release 6.4 (Final) -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark(a)netwolves.com http://www.netwolves.com

1 0

bind (named) compromised?
by James Pifer 10 Feb '14

10 Feb '14

I'm having problems where my upstream bandwidth is being saturated. I've narrowed it down to a DNS issue of some type. If I stop the named service then my bandwidth drops to "normal" according to my untangle firewall. I'm running bind-9.3.6-20.P1.el5_8.6. I'm seeing the following in /var/log/messages: 2014-02-08T23:03:09.558315-05:00 mailserver named[3497]: network unreachable resolving 'hccforums.nl/ANY/IN': 2a00:1188:5::212#53 2014-02-08T23:03:09.558441-05:00 mailserver named[3497]: network unreachable resolving 'hccforums.nl/ANY/IN': 2001:7b8:606::85#53 2014-02-08T23:03:10.008926-05:00 mailserver named[3497]: client 174.128.253.163#5209: view external: no more recursive clients: quota reached 2014-02-08T23:03:11.001878-05:00 mailserver named[3497]: client 173.234.39.133#5209: view external: no more recursive clients: quota reached 2014-02-08T23:03:12.000487-05:00 mailserver named[3497]: client 173.234.39.133#5209: view external: no more recursive clients: quota reached 2014-02-08T23:03:13.000820-05:00 mailserver named[3497]: client 173.234.39.133#5209: view external: no more recursive clients: quota reached 2014-02-08T23:03:14.001501-05:00 mailserver named[3497]: client 192.126.118.105#5209: view external: no more recursive clients: quota reached 2014-02-08T23:03:15.005720-05:00 mailserver named[3497]: client 192.126.118.105#5209: view external: no more recursive clients: quota reached I've tried changing the following in /etc/named.conf but it doesn't seem to have any affect so I commented them back out. tcp-clients 1000; recursive-clients 10000; I also see a chroot directory, but if I grep for named it doesn't appear to be using the chroot(?): # ps aux | grep named named 3497 0.4 0.7 170088 15836 ? Ssl 23:02 0:02 /usr/sbin/named -u named root 3763 0.0 0.0 61192 764 pts/1 S+ 23:13 0:00 grep named I've also tried adding the following to iptables, but it also seems to have no affect: iptables --insert INPUT -p udp --dport 53 -m string --from 40 --to 56 --algo bm --hex-string '|09686363666f72756d73026e6c0000ff|' -j DROP -m comment --comment "DROP DNS Q hccforums.nl" Any suggestions or troubleshooting advice? Much appreciated. James

4 3

openswan and ipsec
by Markus Falb 10 Feb '14

10 Feb '14

# ipsec verify ... If you encounter network related SElinux errors, especially when using KLIPS, try disabling SElinux ... Well, it is not running KLIPS but netkey, anyways I feel not comfortable about disabling selinux on a ipsec router. I am not sure how to handle possible probems in this case, too. If I decide not to disable selinux, and I run into problems, should I a) report it to redhat as a bug, because it is b) disable selinux because ipsec is not meant to work with selinux Maybe just the verify script should be fixed? Maybe I should ask RedHat about this, hm. And finally, do you encounter network related SElinux errors with IPSec, both 5 and 6? -- Kind Regards, Markus

2 1

CentOS-announce Digest, Vol 108, Issue 5
by centos-announce-request＠centos.org 09 Feb '14

09 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0141 CentOS 6 fence-agents Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Feb 2014 14:54:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0141 CentOS 6 fence-agents Update To: centos-announce(a)centos.org Message-ID: <20140208145437.GA1163(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0141 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0141.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 614c2be12f6ca445d7360a443ff0c9a773fac116d7b2b72eb528b3028d0d69a6 fence-agents-3.1.5-35.el6_5.3.i686.rpm x86_64: ebff912c9701ccec8c7b247cb37a0128a7e04e81c919a81c8e7fed3f66caeb90 fence-agents-3.1.5-35.el6_5.3.x86_64.rpm Source: d3b3ae9ea2033c27e97cfe73f51ece788baed09206ef7c57ccb3676dfb04b617 fence-agents-3.1.5-35.el6_5.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 5 ***********************************************

1 0

Upgrading Perl (modules) / RequestTracker
by Michael Mol 08 Feb '14

08 Feb '14

I'm attempting to install RequestTracker on CentOS 6.5. Running "make testdeps" as recommended by RT's installation guide, I'm presented with lists of missing Perl modules. One of these lines reads: Encode >= 2.39 ...MISSING Now, "yum whatprovides '*/Encode.pm' " informs me that that module is part of the core Perl distribution, and is installed on my system. Opening the file itself reveals: # $Id: Encode.pm,v 2.35 2009/07/13 00:49:38 dankogai Exp $ so I know that I have version 2.35 of that module installed, and obviously that's < 2.39. So I need to get 2.39 installed. What is the correct way to do this on CentOS? The last time I had to do anything like this, it was on a Debian box, I went through the process recommended by the guys in #perl, and was left with a broken system that was a real joy to piece back together...

7 8

iso burn
by Hal Wigoda 08 Feb '14

08 Feb '14

I downloaded the CentOS-6.5-x86_64-bin-DVD1.iso and CentOS-6.5-x86_64-bin-DVD12.iso and tried to burn them to a DVD but both Windows 7 and IOS ( MacBook Pro ) do not recognize these as valid isos. What am I doing wrong? -- ----------------- Hal Wigoda Chicago

9 16

Re: [CentOS] OT hard disk geometry
by Miguel Medalha 08 Feb '14

08 Feb '14

It seems to me that there's some confusion on your part about what a SATA power connector is... The SATA edge connector is divided in two parts, a larger one and a narrower one. The narrower one is the signal, or data, connector. The larger one is the power connector. Some older drives also had an additional common Molex connector for power, for compatibility reasons, since at first only a few power supplies had the SATA power connector. Note that the Molex connector does not enable the hot-plugging and unplugging of SATA drives. This needs the 3.3V supply that only the SATA connector provides. As far as I can see, the ST3250318AS does not have such a connector. The manual for the ST3250318AS is here: http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%2… On page 28 you can read about the SATA cables and connectors. The pins you refer to, which are not present on the WD at the same position, are NOT power connections, that is a jumper block as you can read on the first image of page 28. The manual states the following: « It is usually not necessary to set any jumpers on the drive for proper operation; however, if you connect the drive and receive a “drive not detected” error, your SATAequipped motherboard or host adapter may use a chipset that does not support SATA speed autonegotiation. If you have a motherboard or host adapter that does not support autonegotiation: -Install a jumper as shown in Figure 1 below to limit the data transfer rate to 1.5 Gbits per second (and leave the drive connected to the SATA-equipped motherboard or host adapter that doesn’t support autonegotiation) or -Install a SATA host adapter that supports autonegotiation, leave the drive jumper block set to “Normal operation” (see Figure 1 below), and connect the drive to that adapter. This option has the benefit of not limiting the drive to a 1.5 Gbits/sec transfer rate. » I think this is not a power connector issue. The WD is a SATA3 drive (6gb/s). Are you sure that your motherboard supports SATA3 drives? Maybe SOME ports support them while others do not? If not, can you force the WD to operate in a lower mode? Some drives can, either by hardware or software.

5 4

Software RAID1 Failure Help
by Matt 08 Feb '14

08 Feb '14

I am running software RAID1 on a somewhat critical server. Today I noticed one drive is giving errors. Good thing I had RAID. I planned on upgrading this server in next month or so. Just wandering if there was an easy way to fix this to avoid rushing the upgrade? Having a single drive is slowing down reads as well, I think. Thanks. Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors Feb 7 15:58:29 server smartd[2980]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 7 15:58:29 server smartd[2980]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors [root@server ~]# smartctl -H /dev/sda === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED [root@server ~]# smartctl -H /dev/sdb === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED [root@server ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/md2 1.4T 142G 1.2T 12% / /dev/md0 99M 37M 58M 39% /boot tmpfs 7.9G 20K 7.9G 1% /dev/shm [root@server ~]# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb1[1] sda1[0] 104320 blocks [2/2] [UU] md1 : active raid1 sdb2[1] sda2[0] 8385856 blocks [2/2] [UU] md2 : active raid1 sdb3[2](F) sda3[0] 1456645568 blocks [2/1] [U_] unused devices: <none> [root@server ~]# mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Tue Jan 4 05:39:36 2011 Raid Level : raid1 Array Size : 1456645568 (1389.17 GiB 1491.61 GB) Used Dev Size : 1456645568 (1389.17 GiB 1491.61 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Fri Feb 7 15:21:45 2014 State : active, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Events : 0.758203 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 0 0 1 removed 2 8 19 - faulty spare /dev/sdb3 [root@server ~]# mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Tue Jan 4 05:39:36 2011 Raid Level : raid1 Array Size : 8385856 (8.00 GiB 8.59 GB) Used Dev Size : 8385856 (8.00 GiB 8.59 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Fri Feb 7 14:29:36 2014 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Events : 0.460 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 [root@server ~]# mdadm --detail /dev/md0 /dev/md0: Version : 0.90 Creation Time : Tue Jan 4 05:48:17 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Wed Feb 5 11:02:25 2014 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Events : 0.460 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1

8 8

Re: [CentOS] OT hard disk geometry
by Miguel Medalha 08 Feb '14

08 Feb '14

The server's manual recommends filling the drive bays in the 1,2,3,4 order. At this point, you should check the HP support page for the server, Look for controller firmware updates, BIOS updates, troubleshooting advice and so on. Did you try to connect the drive alone? If it is detected alone, you will have a clue there. Some drives don't go along with some others when installed in the same pair of ports, for example. I would also suspect the cable. I have had more problems with SATA cables than I could expect. Also, the drive itself can be defective. I once received two new WD high end drives that couldn't be detected by any controller and I had to return them. The new ones worked fine.

2 1

Re: [CentOS] OT hard disk geometry
by Miguel Medalha 08 Feb '14

08 Feb '14

With some SATA drives the mode change can only be done by a software utility. Some of them don't have jumpers at all.

1 0

Multitab GUI SSH clilent found
by Ljubomir Ljubojevic 08 Feb '14

08 Feb '14

Hi. I just wanted to notify all that I found very nice GUI SSH client at http://sourceforge.net/projects/pacmanager/ It has rpm packages and works very nice. Multi-tab, Expact support, connections tree, connection , user and password saving (I know they should not be saved). Only manual download as far as I know, no repository caries it. -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant

3 3

Re: [CentOS] OT hard disk geometry
by Miguel Medalha 08 Feb '14

08 Feb '14

>> that I am running CentOS-6.5 on my HP MicroServer. Can you please tell us which exact model of MicroServer do you have? That way, it will be easier to help you.

1 0

Raid on centos
by Jeff Allison 07 Feb '14

07 Feb '14

Ok I've a HP mircoserver that I'm building up. It's got 4 bays for be used for data that I'm considering setup up woth softwere raid (mdadm) I've 2 x 2TB 2 x 2.5 TB and 2 x 1TB, I'm leaning towards usig the 4 2.x TB is a raid 5 array to get 6TB. Now the data is on the 2.5TB disks currently. So the plan so far. Building the array as a degraded raid 5 with the 2 x 2TB disks that are emply. Copy the data from one of the 2.5TB disks on to array. Add now empty 2.5TB disk to the Array and wait for it to rebuild. Copy contents of remaining 2.5TB disk 2 array. Add now empty 2.5TB disk to the Array and wait for it to rebuild. So questions... Is the above a stupid idea? Do I need to get involved in gptids? on disks this size? What format should I create the file system as? Should I get lvm involved somewhere? Any pointers would be kindly appreciated. Jeff

4 12

"BUG: soft lockup - CPU#n stuck for X s! [swapper:0]"
by Robert Heller 07 Feb '14

07 Feb '14

I just updated my quad-processor X64 machine (AMD Phenom(tm) II X4 945 Processor) to the latest CentOS 5 xen kernel (2.6.18-371.4.1.el5xen) and I am getting occasional "BUG: soft lockup - CPU#n stuck for X s! [swapper:0]" messages. I did some net searching, and found some bugzilla reports (https://bugzilla.redhat.com/show_bug.cgi?id=649519 and http://bugs.centos.org/view.php?id=4488) but neither are shown as resolved. The machine *seems* to be running alright (it is not hanging or anything). Is this something I need to worry about? Should I revert to the older kernel (2.6.18-371.3.1.el5xen)? This is NOT happening on my single-processor 32-bit laptop (running 2.6.18-371.4.1.el5). -- Robert Heller -- 978-544-6933 / heller(a)deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments

2 1

Virtual Hosts question
by Joseph Hesse 07 Feb '14

07 Feb '14

I am running Wordpress on a CentOS 6.5 server which is behind a router. The private IP is 192.168.0.99, the public URL is X.com (name changed). I have two virtual hosts in my httpd.conf file. The second one, listed below, is for Wordpress and it is accessed with http://X.com/d4i or http://www.X.com/d4i. They work fine. Actually, not show, I have more Wordpress virtual hosts, and they are accessed with http://X.com/s1, http://X.com/s2, etc. and they work. I want the first virtual host to be a default and accessed whenever a user types http://X.com (no sub directory). There is a valid /var/www/html/index.html file. Unfortunately it doesn't work. The error is "Directory index forbidden by Options directive: /var/www/wordpress/" and googling didn't help. I have my httpd.conf and error.log below. Thank you, Joe ============== httpd.conf ============== ServerName 192.168.0.99 NameVirtualHost *:80 <VirtualHost *:80> ServerName IDoNotExist.com DocumentRoot /var/www/html DirectoryIndex Index.html index.html </VirtualHost> <VirtualHost *:80> ServerName X.com ServerAlias www.X.com DocumentRoot /var/www/wordpress DirectoryIndex Index.html index.html index.php Index.php CustomLog logs/access_log_custom common </VirtualHost> ============== httpd.conf ============== ========Tail of error.log ================== [Thu Feb 06 10:25:48 2014] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Feb 06 10:25:48 2014] [notice] Digest: generating secret for digest authentication ... [Thu Feb 06 10:25:48 2014] [notice] Digest: done [Thu Feb 06 10:25:49 2014] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 configured -- resuming normal operations [Thu Feb 06 10:26:01 2014] [error] [client 24.118.254.66] Directory index forbidden by Options directive: /var/www/wordpress/ [Thu Feb 06 10:26:01 2014] [error] [client 24.118.254.66] File does not exist: /var/www/wordpress/favicon.ico ============== error.log ==============

4 3

Console access to kvm guest running WindowsV7
by James B. Byrne 06 Feb '14

06 Feb '14

i86_64 CentOS-6.5 I have installed a Windows instance as a kvm guest on a host running CentOS-6.5. I can access the desktop through the virt-manager console and everythign seems to work, although the mouse cursor seems to get lost from time to time. The virt-manager console display supports various resolutions but when I re-size the desktop display remains essentially a square inside a letter box. What other methods are available to open the windows desktop from the CentOS-6.5 host console or by remote access that allow me to have a re-sizable MS-Windows desktop display for this guest running on my normal (gnome2) desktop? Any suggestions? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

6 10

NFS not recognizing available file space
by Pat Haley 06 Feb '14

06 Feb '14

Hi, I have a server running under CentOS 5.8 and I appear to be in a situation in which the NFS file server is not recognizing the available space on a particular disk (actually a hardware RAID-6 of 13 2Tb disks). If I try to write to the disk I get the following error message [root@nas-0-1 mseas-data-0-1]# touch dum touch: cannot touch `dum': No space left on device However, if I check the available space, there seems to be plenty [root@nas-0-1 mseas-data-0-1]# df -h . Filesystem Size Used Avail Use% Mounted on /dev/sdb1 21T 20T 784G 97% /mseas-data-0-1 [root@nas-0-1 mseas-data-0-1]# df -i . Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sdb1 3290047552 4391552 3285656000 1% /mseas-data-0-1 I don't know if the following is relevant but the disk in question is served as one of 3 bricks in a gluster namespace. Based on the test with touch, which is happening directly at the NFS level, this seems to be an NFS rather than gluster issue. I couldn't find any file in /var/log which had a time that corresponded to the failed touch test and I didn't see anything in dmesg. We have tried rebooting this system. What else should we look at and/or try to resolve or debug this issue? Thanks. Pat -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Pat Haley Email: phaley(a)mit.edu Center for Ocean Engineering Phone: (617) 253-6824 Dept. of Mechanical Engineering Fax: (617) 253-8125 MIT, Room 5-213 http://web.mit.edu/phaley/www/ 77 Massachusetts Avenue Cambridge, MA 02139-4301

6 8

Re: [CentOS] Install without LVM -
by James A. Peltier 06 Feb '14

06 Feb '14

----- Original Message ----- | | | Am 06.02.2014 21:16, schrieb James A. Peltier: | > ----- Original Message ----- | > | | > | How do I install from the centos 6.5 dvd without LVM? Nothing I | > | have | > | tried will permit me to make my own layout unless I accept LVM. | > | | > | Bob | > | | > | -- | > | http://www.qrz.com/db/w2bod | > | Box10 Fedora-20/64bit Linux/XFCE | > | | > | _______________________________________________ | > | CentOS mailing list | > | CentOS(a)centos.org | > | http://lists.centos.org/mailman/listinfo/centos | > | | > | > If not doing a graphical install you will be limited in many | > respects as to what you can do from a disk layout perspective. | > I would also ask why it is that you are choosing not to use LVM | > which offers many bits of useful functionality over | > traditional partitions | | LVM does not offer *anything* sane if it is only blind LVM It's statements like this that are most frustrating. You have made assumptions as to what this person is trying to do rather than answering the question. I answered the question and posed another question. If he's asking one, it might be good to know why the question was asked in the first place. | what benefits? | that you can extend it with additional disks? | nobody right in his mind would do that without have LVM on top of | RAID So, the fact that I use LVM on a single disk makes me out of my mind? I do this because I may miscalculate the disk requirements for one mount point over another. I don't have the traditional whole disk lv_root volume. I have seperate LVs for /var, /home, /data, /local-scratch all of which can be resized at a whim. Oh, and if I get a bigger disk (/data is on a whole disk LVM PV), I can just do a pvmigrate over to the bigger disk. There are many useful reasons to have LVM. | why? because *any* disk failure would be fatal | having 3 disks that way you have *three times* more likely a complete | data loss Sure, here you are correct. If you've gone and done something like place an Logical Volume across multiple single points of failure you've done something that may be seen as "bad". It's not our place to judge the decision, it's our place to offer possible solutions to the needs of the user. | the ordinary uiser *doesn not* need LVM nor can he handle it proper | the advanced user knows hat he is doing and could select it anyways Define ordinary user in this context. The user has made no statement to how "ordinary" they are. They asked a question. The question was answered and another question (mine) asked to try to figure out what the OP is trying to do. | this was, is and will ever be a useless and often dangerous default There is no proof that this is a dangerous default. LVM works just fine while offering additional functionality whether used by the "ordinary" user or not. Offer up concrete evidence as to how LVM vs partitions is any less dangerous on any SPoF failure system. I'd be interested to hear it as I myself have not run into problems with LVM in the past decade or so. Ya, it used to be bad, but it's much, *much* better than it was. -- James A. Peltier Manager, IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier(a)sfu.ca Website : http://www.sfu.ca/itservices "I want to inspire people. I want someone to say "because of you I didn't give up". - Chanda Kaushik

1 0

Install without LVM -
by Bob Goodwin - Zuni, Virginia, USA 06 Feb '14

06 Feb '14

How do I install from the centos 6.5 dvd without LVM? Nothing I have tried will permit me to make my own layout unless I accept LVM. Bob -- http://www.qrz.com/db/w2bod Box10 Fedora-20/64bit Linux/XFCE

4 4

Pan in 6.2??
by Beartooth 06 Feb '14

06 Feb '14

I can't seem to get a way to install Pan in CentOS, and I need it badly. I follow most busy lists, including this one, on Gmane using Pan (and, no, Gmane per Web is no use to me. I have some obscure allergy to webmail). Does anyone know an rpm (one of Fedora's, for instance) that I can install and not immerse myself in dependency hell?

2 1

Re: [CentOS] zoneminder
by tdukes＠palmettoshopper.com 06 Feb '14

06 Feb '14

-------- Original Message -------- Subject: [CentOS] zoneminder From: m.roth(a)5-cent.us Date: Wed, February 05, 2014 8:58 am To: "CentOS mailing list" <centos(a)centos.org> Is there a package for zoneminder in the std repos (base, rpmfusion, epel), or just on rpmforge? mark "unless someone's got a security DVR to loan us for testing...." Last time I checked on RPM Pbone search, there was not a current packe\age compatible with Centos 6. I took one from SRPM from rawhide and rebuilt it. The newer packages have a different kind on init script that Fedora uses.

7 9

zoneminder
by m.roth＠5-cent.us 06 Feb '14

06 Feb '14

Is there a package for zoneminder in the std repos (base, rpmfusion, epel), or just on rpmforge? mark "unless someone's got a security DVR to loan us for testing...."

5 7

macvlan interfaces.
by Jan Hugo Prins 06 Feb '14

06 Feb '14

Hi, Does anyone here have any experience with macvlan interfaces? I need to know if this is stable in Centos. Jan Hugo Prins

1 0

CentOS-announce Digest, Vol 108, Issue 4
by centos-announce-request＠centos.org 06 Feb '14

06 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:0139 Moderate CentOS 5 pidgin Update (Johnny Hughes) 2. CESA-2014:0139 Moderate CentOS 6 pidgin Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 5 Feb 2014 19:41:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0139 Moderate CentOS 5 pidgin Update To: centos-announce(a)centos.org Message-ID: <20140205194113.GA1596(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0139 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0139.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 67302fb0dc1d83b8a161511e70a3903dcddd0b6da9830aff908554167e110430 finch-2.6.6-32.el5.i386.rpm 4e75765cbc346389bb4ddccbbc8457a90cb61fc071bf3f66b35139e590009820 finch-devel-2.6.6-32.el5.i386.rpm dd3dcbbf89956097e263ffe80d69b88ce8105f759d9020063915e947dc7a4a7d libpurple-2.6.6-32.el5.i386.rpm 131cbad8fcd1eb8b6c32741529bcbc1484a3d884bbc52748513c95a5ea5bf229 libpurple-devel-2.6.6-32.el5.i386.rpm 76d81f2c64dc54ef4f272698a234424b97e1f280b9299dc9978594a73899b706 libpurple-perl-2.6.6-32.el5.i386.rpm 4acc344af7b37a9137d4bebc7a9021bc9159b7b60caab3784a9e1deb40f076e1 libpurple-tcl-2.6.6-32.el5.i386.rpm b6161e50f321b283139a21298bbf643fcffcf862d183830795c2ffd2d2b9cd6f pidgin-2.6.6-32.el5.i386.rpm 6bdc0d5bf2aa83b0e2423d7565bd05bd6f34abdcbfc52b5713c4e6cf855e7df9 pidgin-devel-2.6.6-32.el5.i386.rpm da31827340ec6072286c62d3fa6612c885895c0ad7b7230ac14309bdd764feed pidgin-perl-2.6.6-32.el5.i386.rpm x86_64: 67302fb0dc1d83b8a161511e70a3903dcddd0b6da9830aff908554167e110430 finch-2.6.6-32.el5.i386.rpm 17f5585e2eff6f64534beb1e9455aa2b7676283c4556f5b03f1587dfb06226a3 finch-2.6.6-32.el5.x86_64.rpm 4e75765cbc346389bb4ddccbbc8457a90cb61fc071bf3f66b35139e590009820 finch-devel-2.6.6-32.el5.i386.rpm 06d0f5b988509cc094f8e6db6ca8f4c87f83ea9c16db1e76be5b5a81cdd3f4be finch-devel-2.6.6-32.el5.x86_64.rpm dd3dcbbf89956097e263ffe80d69b88ce8105f759d9020063915e947dc7a4a7d libpurple-2.6.6-32.el5.i386.rpm 3246fb795ab6f7d2aa342372af2b87d0fad1fe449c69ff534d542a79cb58bbca libpurple-2.6.6-32.el5.x86_64.rpm 131cbad8fcd1eb8b6c32741529bcbc1484a3d884bbc52748513c95a5ea5bf229 libpurple-devel-2.6.6-32.el5.i386.rpm 5dc51f5155a599531ce7eafeb6dab5e71e0e956dbc6b2c3ec78e4c5248356d6c libpurple-devel-2.6.6-32.el5.x86_64.rpm b28f1e1a86dbcabba5d9a3348c7eef94c0d0d53efd064828e33dce54d75d845a libpurple-perl-2.6.6-32.el5.x86_64.rpm 432d9841d5f52b91c2381b0f7d9946b410862dac9e4775af79dba3e3a21b67f8 libpurple-tcl-2.6.6-32.el5.x86_64.rpm b6161e50f321b283139a21298bbf643fcffcf862d183830795c2ffd2d2b9cd6f pidgin-2.6.6-32.el5.i386.rpm 34a0db70fa592434d5a16558cb7ba9fb128aa1efbb671ba83ca75f140f2c9783 pidgin-2.6.6-32.el5.x86_64.rpm 6bdc0d5bf2aa83b0e2423d7565bd05bd6f34abdcbfc52b5713c4e6cf855e7df9 pidgin-devel-2.6.6-32.el5.i386.rpm ab4d6b7bb2443dddf36d25ce7759ce325d957720369dc8f6184afae89fdb2e7e pidgin-devel-2.6.6-32.el5.x86_64.rpm 2574e349c7dbbadc184ef9c610141f176143c29e65d54bf23b986855c1d7fd06 pidgin-perl-2.6.6-32.el5.x86_64.rpm Source: cba00601abbfafbbc434e2e15ecce7934eefa616fa1df4b0c46903620e52dc2c pidgin-2.6.6-32.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 5 Feb 2014 19:43:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0139 Moderate CentOS 6 pidgin Update To: centos-announce(a)centos.org Message-ID: <20140205194357.GA21788(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0139 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0139.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 54cd22cf339e22a28301695c9be011921cc5541ccb77264214b7998297cf2b0d finch-2.7.9-27.el6.i686.rpm c44cb639aae7f232fd1d3c6417808a52eb88e1f5c224dd1c5adfd2ce2fb90155 finch-devel-2.7.9-27.el6.i686.rpm a147b1266d042adadc20cdd9a2212cad5933ae493644c4363d520ca16a222489 libpurple-2.7.9-27.el6.i686.rpm 8b1bcfb73f970a8de2208c01fca43263f444dd9ee591590710154b43f247c01d libpurple-devel-2.7.9-27.el6.i686.rpm 8bb38576db5befa7ab916725a110c9807522cd41a89b208299b2e246021777ce libpurple-perl-2.7.9-27.el6.i686.rpm 21c6f890cc55f7b164bbd31bf0e3c98424a06f64d844e95371948d8d2e71e90e libpurple-tcl-2.7.9-27.el6.i686.rpm 913bc70f08e7955bf2866e20a62b62f0f3a0f64637cfbae105440c2c09d5504b pidgin-2.7.9-27.el6.i686.rpm 8b9f8256636c5bfff200053b3b81af5a3eefc8ff3ba0e2995920352c30e3ec01 pidgin-devel-2.7.9-27.el6.i686.rpm b5bbfcd1df2454814702d99152b317959a8386425a5d478bd340f23d8a993933 pidgin-docs-2.7.9-27.el6.i686.rpm c327a1c2a1c9d1dad4ef1792110fa6b2fada1ae228dd80767839d75317a2ff54 pidgin-perl-2.7.9-27.el6.i686.rpm x86_64: 54cd22cf339e22a28301695c9be011921cc5541ccb77264214b7998297cf2b0d finch-2.7.9-27.el6.i686.rpm 4112325742a6a9883ec46ae8fac8dc7aed7cfaa44890eeddf07a88e14ce2dc30 finch-2.7.9-27.el6.x86_64.rpm c44cb639aae7f232fd1d3c6417808a52eb88e1f5c224dd1c5adfd2ce2fb90155 finch-devel-2.7.9-27.el6.i686.rpm 237b49c8b8147fc12fdcf3ef99694c79da02228eaf54c4f5f810891b5af944f2 finch-devel-2.7.9-27.el6.x86_64.rpm a147b1266d042adadc20cdd9a2212cad5933ae493644c4363d520ca16a222489 libpurple-2.7.9-27.el6.i686.rpm f1fcafeb8c5e115983691f2f8b7f2ed3ba431845f839f7bf7494aa69c90689e4 libpurple-2.7.9-27.el6.x86_64.rpm 8b1bcfb73f970a8de2208c01fca43263f444dd9ee591590710154b43f247c01d libpurple-devel-2.7.9-27.el6.i686.rpm ad963e4d19772590ede2e3df2bc57c8738640183892878cf1a8f8f24e1047142 libpurple-devel-2.7.9-27.el6.x86_64.rpm 30057f2481e429dc2fd29b1479bc1e4dde32d4045e8fd848233bf09c8e575aa9 libpurple-perl-2.7.9-27.el6.x86_64.rpm 4097c08129e4e76af0828e2bca1b26b22d7a89b5f1b18b8934d9096789186edf libpurple-tcl-2.7.9-27.el6.x86_64.rpm f8e77da72ccacaeddeedc56f2372676eb1f19d78a03e354a1e8020608fd2c98f pidgin-2.7.9-27.el6.x86_64.rpm 8b9f8256636c5bfff200053b3b81af5a3eefc8ff3ba0e2995920352c30e3ec01 pidgin-devel-2.7.9-27.el6.i686.rpm b174e49727feded10555e0ec639916d634550619ee622c40889ac6e711da894e pidgin-devel-2.7.9-27.el6.x86_64.rpm f3d3cc9e2ea52179e420c2d39e1bc63f52ef8dad92aba44e2bc42da7463f9bd9 pidgin-docs-2.7.9-27.el6.x86_64.rpm 8fd96453c932fcb0026a2ee9cdbc1b9711eca976db1cdffe9f81f5777a361255 pidgin-perl-2.7.9-27.el6.x86_64.rpm Source: da765edb6d06cf2d62ad9a51eef486920a33d020cc4a06ee72b0d12bea77f90b pidgin-2.7.9-27.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 4 ***********************************************

1 0

Application Hang issue in RHEL6.4
by Miraj Mohamed 06 Feb '14

06 Feb '14

Hi All, We see our application Hanging at shmctl (SHM_LOCK). Kernel : 2.6.32-358.el6.x86_64 OS : Red Hat Enterprise Linux Server release 6.4 (Santiago) 1. When it hangs, this is what strace gives: [RHEL6.4(a)10.201.0.221 bin]# strace -p 23793 Process 23793 attached - interrupt to quit [ Process PID=23793 runs in 32 bit mode. ] shmget(0x110c1be, 16777216, 0666) = 3801140 shmat(3801140, 0, 0) = 0x85c2c70e7755000 shmctl(3801140, IPC_64|SHM_LOCK, 0^C <unfinished ...> 2. When we kill the application and generate a core file, Here is what gdb shows: Core was generated by ` <our application> 12 12 10.33.0.230 eth1 -1 0 3 fd5d:d50a:8c17:3300::e6'. Program terminated with signal 6, Aborted. #0 0x007c2430 in __kernel_vsyscall () Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.107.el6.i686 libgcc-4.4.7-3.el6.i686 libstdc++-4.4.7-3.el6.i686 (gdb) bt #0 0x007c2430 in __kernel_vsyscall () #1 0x008a8d8e in shmctl@@GLIBC_2.2 () from /lib/libc.so.6 #2 0x0847c13e in MpcMpSwms_SwibIfShmSegOpen (ps=<value optimized out>, ctl=<value optimized out>) at src/MpcMpSwms_SwibIfShm.c:271 #3 0x0847c551 in MpcMpSwms_SwibIfShmOpen (pvs=0xb0e8984, pvctl=0xffc35354) at src/MpcMpSwms_SwibIfShm.c:379 #4 0x0847bb9f in MpcMpSwms_SwibIfOpen (ps=0xb0e7dc4, ctl=0xffc35354, swib_if=SWIB_IF_SHM) at src/MpcMpSwms_SwibIf.c:126 #5 0x080b792a in MpcMpSwms_SwibOpen (ps=0xa019da8, ctl=0xffc357d8) at src/MpcMpSwms_Swib.c:253 #6 0x080b63a0 in main (argc=9, argv=0xffc35924) at src/MpcMpSwms_Main.c:1364 (gdb) What could be the reason for hanging? Any solution? -miraj

2 1

UEFI booting
by Jerry Geis 06 Feb '14

06 Feb '14

Hi All, I received a Intel Nuc D34010WYK. nice and small. I installed 6.5 x86_64 on it in LEGACY boot mode on the mSATA disk. All worked except sound. In process of trying to get that working I saw posts about Need to not use LEGACY boot mode for HDMI sound to work. I am trying to find a document on how to use the UEFI boot on 6.5 Any great resource out there for that? Thanks, Jerry

3 2

yum update tries and fails to install libreswan
by Fred Smith 05 Feb '14

05 Feb '14

On 6.5, I've got openswan installed, but yum update is wanting to install libreswan. If libreswan is intended to replace openswan, wouldn't the appropriate yum transactions have been created to remove opnswan first? I'm stumped. Advice appreciated. Fred -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

2 1

Read only nfsroot and diskless booting CentOS 6?
by David C. Miller 05 Feb '14

05 Feb '14

Does anyone have any good how-to's or documentation on setting up read only root NFS for pxe booting diskless computers? A few months ago I stumbled upon an official Redhat doc through a google search(not hosted by redhat and I cannot find it anywhere on the Redhat site) written by Dave Kline named "Configuring diskless clients with Red Hat Enterprise Linux" from 2011. It seemed to be a work in progress but the steps in it did work for doing nfsroot for one diskless client only. It did not have any explanation for doing read only nfsroot or how to deal with /var for multiple systems. I know there is a file in /etc/sysconfig/readonly-root but I could not get it working correctly. I did kludge together something for /var where during the init process I created a tmpfs for /var and rsync'd a copy of /var from an nfs mount. This worked, but again I felt it was a kludge to a proper solution. Although I got this working for booting an old bios based Dell and a VM via PXE boot, I don't know if it will work for newer UEFI based computers. I'm just looking to boot about 20 or so small modern PC's into a stripped down gnome desktop with a few apps installed. I still have not decided on the diskless clients I want to use. I was thinking either something like the low end intel NUC or one of the small AMD APU based PC's. David C Miller.

2 1

Issue with startup and file manager
by Fabrizio Di Carlo 05 Feb '14

05 Feb '14

Hello to all, I just power on my laptop and when I login the OS started to load N istances of File Manager... so my laptop is not usable... how can I solve?

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss