- Discuss - lists.centos.org

chkconfig question
by Larry Martell 13 Dec '13

13 Dec '13

In the docs for chkconfig it says: <startlevellist> is a list of the runlevels for which the service should be started by default. Only services which are really required for a vital system should define runlevels here. If no runlevels are defined, a - should be used in place of the runlevels list. and then: More commonly, the service is off by default on all runlevels, which looks like this: # chkconfig: - 20 80 But services with a chkconfig entry like that are started at boot time (e.g. mysql, httpd). So when do they get started?

1 0

Automatic network speed test and reporting
by Frank Cox 13 Dec '13

13 Dec '13

The ISP that I do some occasional work for is planning to roll out a new and much faster Internet service, and as such they will be coming here on Monday to upgrade my connection so I can test and play with it for a few weeks before they roll it out for the general public. It would be convenient if I could set up a cron job that would run some sort of an upload/download speed test from me back to one of their central office servers (or somewhere else in the big scary world, I suppose, though I suspect they will be more interested in the connection from here to another point on their own network) on a regular basis throughout the day, and then generate a nice report of some kind that I could then email to the technical services folks. Does anyone have any recommendations for something like this? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

3 3

CentOS 6.5 kernel-2.6.32-431.1.2.el6.x86_64 kernel panic
by MeasureMyEnergy - Tim D'Cruz 13 Dec '13

13 Dec '13

Hi, Has anyone else encounter the following; While testing the new CentOS 6.5 kernel-2.6.32-431.1.2.el6.x86_64 on a Dell PowerEdge 2950 in the lab it kernel panics on boot up, complaining about the scsi_wait_scan Module signed with unknown public key. The Dell Poweredge 2950 is running the latest 2.7.0 BIOS and BMC Firmware v2.50 with PERC5/i integrated (running latest firmware 5.2.2-0072, A09) Error reported; FATAL: Error inserting scsi_wait_scan (/lib/modules/2.6.32-431-1.2.el6.x84_64/kernel/drivers/scsi/scsi_wait_scan.ko) Required Key not available Module signed with unknown public key Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-431.1.2.el6.x86_64 #1 regards Tim -- Kindest Regards, Tim D'Cruz Network and Systems Administrator MeasureMyEnergy Ltd tel: 08455 610120 mob: 07885 913255 email: tim.dcruz(a)measuremyenergy.com website: http://www.MeasureMyEnergy.com MeasureMyEnergy Ltd is a company registered in England & Wales, registration number: 7982530. Registered Office: Unit 1, Rivermead, Pipers Way, Thatcham RG19 4EP. VAT number: GB135063635 This e-mail is confidential and may contain legally privileged information. If you are not the intended recipient it may be unlawful for you to read, copy, distribute, disclose or otherwise use the information contained within this e-mail. Any views or opinions presented are solely those of the author, and may not represent those of MeasureMyEnergy Ltd. Please consider the environment before printing this email

6 6

CentOS-announce Digest, Vol 106, Issue 8
by centos-announce-request＠centos.org 13 Dec '13

13 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1829 Important CentOS 6 nss-util Update (Johnny Hughes) 2. CESA-2013:1829 Important CentOS 6 nspr Update (Johnny Hughes) 3. CESA-2013:1829 Important CentOS 6 nss Update (Johnny Hughes) 4. CESA-2013:1823 Important CentOS 6 thunderbird Update (Johnny Hughes) 5. CESA-2013:1812 Critical CentOS 6 firefox Update (Johnny Hughes) 6. CESA-2013:1801 Important CentOS 6 kernel Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 13 Dec 2013 00:04:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1829 Important CentOS 6 nss-util Update To: centos-announce(a)centos.org Message-ID: <20131213000431.GA47682(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1829 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1829.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e707fc4c876ecaf174af3f4fa26aaee01ed05579700bff334f6f28eaffed01ec nss-util-3.15.3-1.el6_5.i686.rpm fa94d0c9da9039e57403d54e5f60fbde23fe1dc56ca80656da703149c5a6a0c0 nss-util-devel-3.15.3-1.el6_5.i686.rpm x86_64: e707fc4c876ecaf174af3f4fa26aaee01ed05579700bff334f6f28eaffed01ec nss-util-3.15.3-1.el6_5.i686.rpm 9ec6a98d107597a0808a6b30ac579b959c69d5ef53d8a0c4f987ad3f03ffdaeb nss-util-3.15.3-1.el6_5.x86_64.rpm fa94d0c9da9039e57403d54e5f60fbde23fe1dc56ca80656da703149c5a6a0c0 nss-util-devel-3.15.3-1.el6_5.i686.rpm 9b2f78ddc5d4a633f0157c2cd0d4361a42cd1545abb53ccc5a7ca7a74dc5b990 nss-util-devel-3.15.3-1.el6_5.x86_64.rpm Source: db051ad1968d4f865bcedbf59e99942648257f5bd6ac9e58c619f0a650ea84a5 nss-util-3.15.3-1.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 13 Dec 2013 00:05:08 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1829 Important CentOS 6 nspr Update To: centos-announce(a)centos.org Message-ID: <20131213000508.GA47915(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1829 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1829.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c3b251ec21cf9ee3c4ee241966fc9e7b2d5530c5f595e4073adbae2fbd6f4714 nspr-4.10.2-1.el6_5.i686.rpm ec5dceb7588d92e1a9c26adef262ff019bc06b6a43a6abf25891ce7e72e438ad nspr-devel-4.10.2-1.el6_5.i686.rpm x86_64: c3b251ec21cf9ee3c4ee241966fc9e7b2d5530c5f595e4073adbae2fbd6f4714 nspr-4.10.2-1.el6_5.i686.rpm 296b92ad2eefdd624c5e0e20d2d4211e8a0299caf8b80bac6f26c2e8f0c7a5d9 nspr-4.10.2-1.el6_5.x86_64.rpm ec5dceb7588d92e1a9c26adef262ff019bc06b6a43a6abf25891ce7e72e438ad nspr-devel-4.10.2-1.el6_5.i686.rpm fbb72919d15049f2ee5ef615db654bad3a3d8def990f0921a4950b4cc427f37e nspr-devel-4.10.2-1.el6_5.x86_64.rpm Source: 349b30c29e0b3051824309a6776a8b8b6b935881460e79f70b4d4216955caabf nspr-4.10.2-1.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 13 Dec 2013 00:05:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1829 Important CentOS 6 nss Update To: centos-announce(a)centos.org Message-ID: <20131213000557.GA48220(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1829 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1829.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 47d4e1c922ecbc55e75bc85290452646a098e425a50e18c18da3acdce546b61e nss-3.15.3-2.el6_5.i686.rpm f88e9a13ca4a94cdc7ccbb13f669163aeb2c8c0a2b0710aa2538d63ced724d0b nss-devel-3.15.3-2.el6_5.i686.rpm 49b8eb1ff5b51d6ac62918b0dd26fbfdec406adccb3d2e0e09d9d097e897712f nss-pkcs11-devel-3.15.3-2.el6_5.i686.rpm b8efad310402745ef559c094d8d4112b880e92014b1bc3291945492ced592494 nss-sysinit-3.15.3-2.el6_5.i686.rpm f897d2d697c48e97064f685f11c94af1cf44a1cb72aa0dae62dd47a30d5e7980 nss-tools-3.15.3-2.el6_5.i686.rpm x86_64: 47d4e1c922ecbc55e75bc85290452646a098e425a50e18c18da3acdce546b61e nss-3.15.3-2.el6_5.i686.rpm 0ce97f3865a93bf3613da9d5451a8002d8285bcbb4dacf4679fd5e26577173d3 nss-3.15.3-2.el6_5.x86_64.rpm f88e9a13ca4a94cdc7ccbb13f669163aeb2c8c0a2b0710aa2538d63ced724d0b nss-devel-3.15.3-2.el6_5.i686.rpm df2a0d56e22fc24441c9dd7bb229915c8e868c3753e4607798b3367995258fbe nss-devel-3.15.3-2.el6_5.x86_64.rpm 49b8eb1ff5b51d6ac62918b0dd26fbfdec406adccb3d2e0e09d9d097e897712f nss-pkcs11-devel-3.15.3-2.el6_5.i686.rpm 63ee2fee44f7790ea835eedf1dd5273217904d2fb78bb56455c8b549bacbb853 nss-pkcs11-devel-3.15.3-2.el6_5.x86_64.rpm 7909bf3f53161d3254c123baa58f9578724ef725bb5be67df86cdb6940720407 nss-sysinit-3.15.3-2.el6_5.x86_64.rpm e833938067022597c82c2db81d10acb0f15f87a4367d9c6d45b52789709858b3 nss-tools-3.15.3-2.el6_5.x86_64.rpm Source: a445edd94986ce6d61dcc5581ea698d70f5aa965709cefcb229de6d401823599 nss-3.15.3-2.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 13 Dec 2013 00:07:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1823 Important CentOS 6 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20131213000712.GA48423(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1823 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1823.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dba295956d846afe1a42555dd6eaba456523b0e7b2c98cb60b5dc79366bebcb1 thunderbird-24.2.0-1.el6.centos.i686.rpm x86_64: 03f7915d1d5385c68bfcc5ff27ae97cd6f34b96cc19c615ce3f5f871205402da thunderbird-24.2.0-1.el6.centos.x86_64.rpm Source: 55bba3a7c666da1b681c570eed5c95d1cd4e03d22c55176e9ba4f5391ac67909 thunderbird-24.2.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 13 Dec 2013 00:08:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1812 Critical CentOS 6 firefox Update To: centos-announce(a)centos.org Message-ID: <20131213000828.GA48645(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1812 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1812.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5b31ce9b71d1a392c418429aa142a2d183e552284560f7361d9dd2198d0267e4 firefox-24.2.0-1.el6.centos.i686.rpm x86_64: 5b31ce9b71d1a392c418429aa142a2d183e552284560f7361d9dd2198d0267e4 firefox-24.2.0-1.el6.centos.i686.rpm 66de1cc9a8467678c09db805c6d75efe3a8815db218d22a85218b074fcc77a55 firefox-24.2.0-1.el6.centos.x86_64.rpm Source: 17fd65c6cd6e515ce8eece8f049e22d2629817283911aafb9fc9297bfe078e99 firefox-24.2.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Fri, 13 Dec 2013 00:18:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1801 Important CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20131213001844.GA49268(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1801 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1801.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7a276b20cff8d7f39494ee598445f59394303c080d263e7bc80180c047ece83e kernel-2.6.32-431.1.2.el6.i686.rpm 64d9f6efb2e0ca6a9f937ed61b816dfeec5bf8d2fcd0136a7807df105c414914 kernel-abi-whitelists-2.6.32-431.1.2.el6.noarch.rpm e80bea7aea40e092aec8c09e65724ba5c771e770c4ae3143bb2361edc4bc14be kernel-debug-2.6.32-431.1.2.el6.i686.rpm ad57764454007da2cd66fa16cc79cefc330db03af97bc588c9d1c740d7537107 kernel-debug-devel-2.6.32-431.1.2.el6.i686.rpm f904f73c326d72e68b30e5a13fddd7a3bfe4e703da21ac74eadae9ccc407d48f kernel-devel-2.6.32-431.1.2.el6.i686.rpm 1916a892606b2123784f3de1e66b8a78875f21205cf88cb40adaaf79a75b93b4 kernel-doc-2.6.32-431.1.2.el6.noarch.rpm 202c4d16cb79091884cdd89993610bae41d8f367c153ac0fc0c25f5e61cabbc1 kernel-firmware-2.6.32-431.1.2.el6.noarch.rpm ebba107981dbf893227908a83565984dcb49540fd5b3c95beb5c8a89b7cbe1dd kernel-headers-2.6.32-431.1.2.el6.i686.rpm e9eb95d986a997bced6745ce47e2ae754076d09d6772da2caa83b8c3563e1082 perf-2.6.32-431.1.2.el6.i686.rpm 63ad857812f96cd22efbf9f71b8ed84a0108593841253d225e702d699d30b505 python-perf-2.6.32-431.1.2.el6.i686.rpm x86_64: 60e353e373702bd1ddcab5c7ff0a6ba0dfa8a4d2ccce10edf67c6490e4fb3bec kernel-2.6.32-431.1.2.el6.x86_64.rpm 64d9f6efb2e0ca6a9f937ed61b816dfeec5bf8d2fcd0136a7807df105c414914 kernel-abi-whitelists-2.6.32-431.1.2.el6.noarch.rpm e2913755c846141429be0272ee7bd341344d2fa3cf2f1ba7b3e2b1b0f242f7c9 kernel-debug-2.6.32-431.1.2.el6.x86_64.rpm 2383b8ecefe1e6a0b590f8c1c6057a2546877e3867280cffae2db78fe4bbc4ff kernel-debug-devel-2.6.32-431.1.2.el6.x86_64.rpm 94e745e3441259d1d2f580ed0b368eb160a5e642c69b799bda3a497d2402dc8a kernel-devel-2.6.32-431.1.2.el6.x86_64.rpm 1916a892606b2123784f3de1e66b8a78875f21205cf88cb40adaaf79a75b93b4 kernel-doc-2.6.32-431.1.2.el6.noarch.rpm 202c4d16cb79091884cdd89993610bae41d8f367c153ac0fc0c25f5e61cabbc1 kernel-firmware-2.6.32-431.1.2.el6.noarch.rpm 296cfcc357d2607cbaf910a94f45228a92f29644066a54a4f48dde7d14ce14b7 kernel-headers-2.6.32-431.1.2.el6.x86_64.rpm c7252273eb3c9d3625991941f8bf10d7ed1d11d7b27bc66fd0943e9ceeeaf281 perf-2.6.32-431.1.2.el6.x86_64.rpm 6decaa7fc84694d1e4330822c47c7998786df4de4021a2a878c2ec90efe9992b python-perf-2.6.32-431.1.2.el6.x86_64.rpm Source: 07bf7b8d8a0629c31d25ebe5be04bb38d691033dafd02af283a6d0a314b95454 kernel-2.6.32-431.1.2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 8 ***********************************************

1 0

RHEL 7 Beta Hidden WIFI issue
by Bonnie B Mtengwa 13 Dec '13

13 Dec '13

Im having problems connecting to Hidden WIFI networks on my RHEL 7 beta. I have an HP Elitebook 2560p. But if I make the Wireless Access Point visible, im able to connect to it, and NM is able to save the connection script under "/sysconfig/network-scripts". I tried on 3 different Hidden Networks, The solution was to manually create the connection script in "/sysconfig/network-scripts".after copying one from a network I had connected to. That's when the hidden wireless became visible and im now connected. But is this the way one needs to connect to a hidden Wireless? I thought having SSID, security type and password were sufficient. Regards Bonnie Mtengwa

2 1

mkbootdisk error????
by mcclnx mcc 13 Dec '13

13 Dec '13

we have CENTOS 5.10 on server. I tried to created bootable CD and have error. Any ideal? #mkbootdisk --verbose --iso --device /tmp/boot.iso 2.6.18-371.1.2.el5 Installing isolinux... cp: cannot stat `/usr/lib/syslinux/isolinux.bin': No such file or directory done Copying /boot/vmlinuz-2.6.18-371.1.2.el5... done. Copying /boot/initrd-2.6.18-371.1.2.el5.img... done. Configuring bootloader... done. mkisofs: Uh oh, I cant find the boot image 'isolinux/isolinux.bin' !

2 1

mod_fastcgi on 6.5?
by moeinvaz 13 Dec '13

13 Dec '13

Hi, I upgraded from 6.4 to 6.5, and I don't see mod_fastcgi anymore. Yum cannot find it to install either. I do have fasttrack repo added. Any suggestions please? -AM

3 2

audio CD playing oddity
by Fred Smith 13 Dec '13

13 Dec '13

Hi all! This isn't anything like urgent, or ultimately even particularly important, but I find it a curious oddity and thought to in quire if any of you have thoughts on it... On my Centos 6.5 box, I have a PATA CDRW drive, and a SATA dvd drive. when playing a CD in the CDRW drive, every short while I get a sudden break in the audio while the CD is spun up. when playing the same CD in the dvd drive, I get no such phenomenon. I'm theorizing that it's one of: 1. weird PATA drive (next time I open up the case I'll try one of the spare drives I have on the shelf, and see). 2. some issue with the way PATA drives work 3. some issue with the way Linux accesses PATA drives. 4. something else. I note that the drive spins madly once it starts up to read a block of audio data, slowly spinning down afterwards. If the next read of audio data occurs before it has stopped, it will read it and spin up further. if, however, it has spun down (I assume stopped) until the drive seems to be stopped (or at least silent) I get the pause. Is there some knob to twist in the PATA subsystem that would have some effect on this? or any other pertinent thoughts. -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord detests the way of the wicked but he loves those who pursue righteousness. ----------------------------- Proverbs 15:9 (niv) -----------------------------

1 0

Do I need a dedicated firewall?
by Jason T. Slack-Moehrle 12 Dec '13

12 Dec '13

Hi All, So my electricity bill is through the roof and I need to pair down some equipment. I have a CentOS 6.5 Server (a few TB, 32gb RAM) running some simple web stuff and Zimbra. I have 5 static IP's from Comcast. I am considering giving this server a public IP and plugging it directly into my cable modem. This box can handle everything with room for me to do more. Doing this would allow me to power down my pfSense box and additional servers by consolidating onto this single box. I have the firewall on on the server and only allowing the few ports I need. I dont run ssh on 22 What do you guys think? Jason

11 16

CentOS-announce Digest, Vol 106, Issue 7
by centos-announce-request＠centos.org 12 Dec '13

12 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1821 CentOS 6 ricci Update (Johnny Hughes) 2. CESA-2013:1812 Critical CentOS 5 firefox Update (Johnny Hughes) 3. CESA-2013:1823 Important CentOS 5 thunderbird Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Dec 2013 11:24:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1821 CentOS 6 ricci Update To: centos-announce(a)centos.org Message-ID: <20131211112446.GA18014(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1821 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1821.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 80ff871f6c19feceac33011557da23d1a4ebb91acfdca8f0bc464d3376f0babd ccs-0.16.2-69.el6_5.1.i686.rpm 4899d79c807f7473065fabfc2138842b43d1854f98614a9e7abc82e94c4284c4 ricci-0.16.2-69.el6_5.1.i686.rpm x86_64: b5000de7854dbbe5cba448345e2515f5c8c10b2da270e75e2da7be55df08e79e ccs-0.16.2-69.el6_5.1.x86_64.rpm d8dcf661a7121d66f7cd935da1415c083a512ea4bced6bbef99fba314eb2607e ricci-0.16.2-69.el6_5.1.x86_64.rpm Source: 2a19e00c515277cbe2c8510d42744af888d3a554450ac194a67df8a14b2dd908 ricci-0.16.2-69.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 11 Dec 2013 11:44:39 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1812 Critical CentOS 5 firefox Update To: centos-announce(a)centos.org Message-ID: <20131211114439.GA896(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1812 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1812.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3ddecbd7876061379a2f639742cca74e03c6abf00ae93e8156e9e015a26aa2d6 firefox-24.2.0-1.el5.centos.i386.rpm x86_64: 3ddecbd7876061379a2f639742cca74e03c6abf00ae93e8156e9e015a26aa2d6 firefox-24.2.0-1.el5.centos.i386.rpm dd4ddbebe7344ff255183977d1ec5fef2ebde2523dc5426978431075ca12c42d firefox-24.2.0-1.el5.centos.x86_64.rpm Source: ba6b752b236b9aeeafbd6d7a87f27fb55e37dc7f4061e0fc1ad7018440b5b817 firefox-24.2.0-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 11 Dec 2013 23:13:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1823 Important CentOS 5 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20131211231352.GA2560(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1823 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1823.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7fad0030fce543b339b258f567ff902c1fcb5ebc334909ad1f227057701ff402 thunderbird-24.2.0-2.el5.centos.i386.rpm x86_64: e2ff2a8d3e1002a7a344ab3cbbc177fc43e1e33b4f1caefc2d7ed39e44224363 thunderbird-24.2.0-2.el5.centos.x86_64.rpm Source: 1ba5e70c99fc2db5d2d8e84c02eea187ca28ddc0903eb29d63717ddf43a5004f thunderbird-24.2.0-2.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 7 ***********************************************

1 0

default /etc/ssh/sshd_config?
by Jason T. Slack-Moehrle 12 Dec '13

12 Dec '13

Hello All, I was setting up a new server and I accidentally overwrote the default /etc/ssh/sshd_config. Can anyone bail me out with a vanilla copy? Jason

2 2

Offline YUM repository setup working but yum with --installroot fails
by Wade Hampton 11 Dec '13

11 Dec '13

I use a local, off-line repository for CentOS plus updates for my development network (my setup for many years). By design, the repository has no physical connection to the Internet. Everything seems to be setup correctly and works fine for installs/updates. However I am trying to use the --installroot option for YUM and it is complaining about not finding a mirror. I removed the lines about mirror from my CentOS repo files so I am confused. My CentOS-Base.repo file contains: [base] name=CentOS-$releaseserver - Base baseurl=http://myhost.org/yum/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5 [updates] name=CentOS-$releaseserver - Updates baseurl=http://myhost.org/yum/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5 I have RPMs from the CentOS 5.10 DVDs in a directory indexed by createrepo. I also have a copy of the current updates (as of Monday). I can install and update via this configuration. My web server has the directory tree: /var/www/html/yum/centos/5 -> /var/www/html/yum/centos/5.10 /var/www/html/yum/centos/5.10/os/i386 /var/www/html/yum/centos/5.10/updates/i386 I am testing some code to make a small, light install. When I run yum with --installroot, it hangs and eventually times out looking for a mirror: {copy centos-release-5-10.el5.centos.i386.rpm to the current dir} mkdir tmpdir rpm --root=tmpdir -ivh --nodeps centos-release*rpm yum --installroot=tmpdir install basesystem filesystem bash kernel passwd YUM hangs and eventually responds with: Could not retrieve mirrorlist http://mirrlist.centos/org/?release=5&arch=i386&repo=os error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution') ... Anyone have any ideas? Cheers, -- Wade Hampton

1 0

CentOS-announce Digest, Vol 106, Issue 6
by centos-announce-request＠centos.org 11 Dec '13

11 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1810 CentOS 6 java-1.7.0-openjdk Update (Johnny Hughes) 2. CEBA-2013:X016 Xen4CentOS kernel Bugfix Update (Johnny Hughes) 3. CESA-2013:X017 Xen4CentOS xen Security Update (Johnny Hughes) 4. CESA-2013:1813 Critical CentOS 6 php Update (Johnny Hughes) 5. CESA-2013:1814 Critical CentOS 5 php Update (Johnny Hughes) 6. CESA-2013:1813 Critical CentOS 5 php53 Update (Johnny Hughes) 7. CEBA-2013:1819 CentOS 6 spice-server Update (Johnny Hughes) 8. CEBA-2013:1820 CentOS 6 pacemaker Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Dec 2013 15:45:27 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1810 CentOS 6 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20131210154527.GA58164(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1810 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1810.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 51fd9694a53204b193fb54737a45ec7facb631163a85ec72390c03075db897e0 java-1.7.0-openjdk-1.7.0.45-2.4.3.4.el6_5.i686.rpm fab0f9e2985ce0ca214dbc50b4004f5fe76c08d20bdaddd7683818f64f54d8c8 java-1.7.0-openjdk-demo-1.7.0.45-2.4.3.4.el6_5.i686.rpm f171fe3e4d08225e9fd9f6ad3cab4cd38e5f419192f80283305a60fd74eec6f3 java-1.7.0-openjdk-devel-1.7.0.45-2.4.3.4.el6_5.i686.rpm 22664307de2515eab7beaf5c020a0e4c9f684c871fedf3e88171be9cc82d20ed java-1.7.0-openjdk-javadoc-1.7.0.45-2.4.3.4.el6_5.noarch.rpm 75e22d7bfad3a1d2fcfbf24253a708a3bc99e2bc7aa576f63817a477acd2396e java-1.7.0-openjdk-src-1.7.0.45-2.4.3.4.el6_5.i686.rpm x86_64: 8343a1e172ff8e17d46070a36735c081e93ea387994870c3b1268c66cc8b6344 java-1.7.0-openjdk-1.7.0.45-2.4.3.4.el6_5.x86_64.rpm 50b3fc396489a44fd17ae2fbd3b513ec61687174a3afa1cc98ef0b69bd3ca2ec java-1.7.0-openjdk-demo-1.7.0.45-2.4.3.4.el6_5.x86_64.rpm 6dabcef1999f5fef41f622a61a76e115f790797d4fc82bf2eb50362d764ad548 java-1.7.0-openjdk-devel-1.7.0.45-2.4.3.4.el6_5.x86_64.rpm 22664307de2515eab7beaf5c020a0e4c9f684c871fedf3e88171be9cc82d20ed java-1.7.0-openjdk-javadoc-1.7.0.45-2.4.3.4.el6_5.noarch.rpm deadd71bbcd5e8f360f442a7ceb879a16e6d34eb946d775f810fc20a916c65ea java-1.7.0-openjdk-src-1.7.0.45-2.4.3.4.el6_5.x86_64.rpm Source: d36a0acadcf2b848f5c79eb46ee63533854ea37e8b9ec78a47857d8db3f86f9d java-1.7.0-openjdk-1.7.0.45-2.4.3.4.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 10 Dec 2013 22:36:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:X016 Xen4CentOS kernel Bugfix Update To: CentOS-announce(a)centos.org Message-ID: <20131210223638.GA558(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:X016 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 8d240567c9b4d4a96460664df07e80e84447bd57f44fd495d56f5a73c5a18263 e1000e-2.5.4-3.10.23.2.el6.centos.alt.x86_64.rpm de80d1761e17c23e227ef1354efbfef9e08ca877fdd297d8ebfa5d132714897d kernel-3.10.23-11.el6.centos.alt.x86_64.rpm 2471012a329ef40489042f2806fe7716d509c0174830b40dbb2631e15f88a96b kernel-devel-3.10.23-11.el6.centos.alt.x86_64.rpm fc57706c1e2c2fd3841d04f50af2b747be27b09ae32fe96c05f6f5355c71ee47 kernel-doc-3.10.23-11.el6.centos.alt.noarch.rpm 27235bb0a03a3efda87cd23fcf35353e8f8e33a78c68e31a6a349f547300ffc3 kernel-firmware-3.10.23-11.el6.centos.alt.noarch.rpm 9cb3d411dec4022d553b8f0328a0b17c4c2dabcafff3436960eb62eee11fc852 kernel-headers-3.10.23-11.el6.centos.alt.x86_64.rpm 6d4edca78ec6f1c26d68080a1795b913e1464a8354fb2b2b105efb058a450b23 perf-3.10.23-11.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 4144ed2a590b4213062d11ab96043688848180db6de13e5dfa79b66b5115503c e1000e-2.5.4-3.10.23.2.el6.centos.alt.src.rpm 7c52232dbc488a7ed992814ad38a69132b42a5624a3e5353f09d9b6a4ce4707b kernel-3.10.23-11.el6.centos.alt.src.rpm ===================================================== Kernel Changelog info from the SPEC file: * Tue Dec 10 2013 Johnny Hughes <johnny(a)centos.org> 3.10.23-11 - upgrade to upstream 3.10.23 e1000e Changelog info from the SPEC file: * Tue Dec 10 2013 Johnny Hughes <johnny(a)centos.org> - 2.5.4-3.10.23.2.el6.centos.alt - build against version 3.10.23 kernel ===================================================== The following kernel changelogs are available from kernel.org since the previous kernel: https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.23 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.22 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.21 ===================================================== NOTE: You must run /usr/bin/grub-bootxen.sh to update the file /boot/grub/grub.conf (or you must update that file manually) to boot the new kernel on a dom0 xen machine. See for info: http://wiki.centos.org/HowTos/Xen/Xen4QuickStart -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 3 Date: Tue, 10 Dec 2013 22:37:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:X017 Xen4CentOS xen Security Update To: CentOS-announce(a)centos.org Message-ID: <20131210223716.GA566(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X017 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 588443b1936d3da45e5872a1578722fdac5ddf0eaeb02b8e47854a3c1d7a45f5 xen-4.2.3-26.el6.centos.alt.x86_64.rpm 12c0af60f60af67ebc07cd5dca9d61b6634f4be33966fcdcc77e3039161ef6f4 xen-devel-4.2.3-26.el6.centos.alt.x86_64.rpm 4a60dc96c14fd735ddf1cde1f08322dd5c94d982227347dfd15abdcee11d2790 xen-doc-4.2.3-26.el6.centos.alt.x86_64.rpm b36b1ede055d17639d4bbadd0e17aec1ffee73ed0f6f648fa8e76492894b074d xen-hypervisor-4.2.3-26.el6.centos.alt.x86_64.rpm e70dc056dfed81cae18ad19dc5b48478c888c26212134b8dd202415d5e8170b2 xen-libs-4.2.3-26.el6.centos.alt.x86_64.rpm 2554337053b5bc9b3ecc581d59960ce500afb2944feff6ccacd69caf92f93be1 xen-licenses-4.2.3-26.el6.centos.alt.x86_64.rpm f63b13925967a8c3e9be02b97732544200ce2e72e334350bc9fee401c2e2cc8b xen-ocaml-4.2.3-26.el6.centos.alt.x86_64.rpm 77229a8d145016e1fa9e640f321f682704f4fd567762f906cdf5b2d9984bf76d xen-ocaml-devel-4.2.3-26.el6.centos.alt.x86_64.rpm 92805976d532f9ec8c9f49fe3f3ae6ee682f71636becfe80c961dd1160b213c6 xen-runtime-4.2.3-26.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- febf2b9b59a070713d1c3928ad923a403f219f580b995de005389c3b42d4fa2b xen-4.2.3-26.el6.centos.alt.src.rpm ===================================================== xen Changelog info from the SPEC file: * Tue Dec 10 2013 Johnny Hughes <johnny(a)centos.org> - 4.2.3-26.el6.centos - Roll in Patches 147, 148, 149, 150 for the following XSAs: - XSA-74 (CVE-2013-4553), XSA-76 (CVE-2013-4554), XSA-80 (CVE-2013-6400) - XSA-82 (CVE-2013-6885) ===================================================== The following XSA info is available from the Xen site http://xenbits.xen.org/xsa/advisory-74.html http://xenbits.xen.org/xsa/advisory-76.html http://xenbits.xen.org/xsa/advisory-80.html http://xenbits.xen.org/xsa/advisory-82.html -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 4 Date: Wed, 11 Dec 2013 09:25:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1813 Critical CentOS 6 php Update To: centos-announce(a)centos.org Message-ID: <20131211092538.GA8677(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1813 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1813.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 38583036748cdeb08b37132388a84926315ef7b850e055c7b49cbdd62dd9e398 php-5.3.3-27.el6_5.i686.rpm 8802f8e1964f66b75a9f155a2a6d4ae76ab13080a08241375fbf0e44c6830d1a php-bcmath-5.3.3-27.el6_5.i686.rpm fa7959499135c0f4e0ecc9155e8d4b88da93b2032ee228f48694cfeffb71fabb php-cli-5.3.3-27.el6_5.i686.rpm 93e0bc52bb58d4831d7951ac36278094ab7240da3b078dd6931f15ade0b6d446 php-common-5.3.3-27.el6_5.i686.rpm 78902963d1909c8606f9b5b4e4750f9959a6f28c41f44bc0fc2c222b6b7332b6 php-dba-5.3.3-27.el6_5.i686.rpm 00f18482ea5b8d33219880683e56efa04a0d9737da07aa9ac558fcb7aa2bb32e php-devel-5.3.3-27.el6_5.i686.rpm e7167571449052b3bb9f165df40a5cd708c81db88b4bdeea740640ad38b2c704 php-embedded-5.3.3-27.el6_5.i686.rpm 238cc7bb4f5e2dba1be13b0a805493372b0dde4fb9ab2b34f6e650b823a0bc2b php-enchant-5.3.3-27.el6_5.i686.rpm e4ad842ad60a2f9f5e13362a31aa287bf2c7de5192390099dee1519fc95c1d00 php-fpm-5.3.3-27.el6_5.i686.rpm 812611b8525d85b08090e54d0355dced52bb3c12e88b930ae1a101df73a02ef4 php-gd-5.3.3-27.el6_5.i686.rpm 87ce15938278b646abd2971d4a5737a27ee28306554d3a180474d5a5093b4dc7 php-imap-5.3.3-27.el6_5.i686.rpm 393d821cbbc01cb5379176d84632106865e1b4a958dfdfd33cb56a780156896c php-intl-5.3.3-27.el6_5.i686.rpm 119ea197f754ee25fc4184b5276484f9c1e59a46e6977af65b144ad625a30018 php-ldap-5.3.3-27.el6_5.i686.rpm 9d449574eb13d4dc43d297fcb3517df22d7feb4594a7e382fa410761562ab073 php-mbstring-5.3.3-27.el6_5.i686.rpm 08cae30fc16014ff8761423147bb4bbefa9025d40c9c798eecfc3a6baf14fc39 php-mysql-5.3.3-27.el6_5.i686.rpm 379c2731fdb95c3bf7a813b09662bd35f5327a4fade59b3794e8926e1d6674e9 php-odbc-5.3.3-27.el6_5.i686.rpm 93dc1c5c38d07b934532b1dd37883b90b24128922da5489b84deb70d821488a7 php-pdo-5.3.3-27.el6_5.i686.rpm 36c40ebadc1b0d8c2a4d686006663e17a8013831de95ef399317b7adf1baf616 php-pgsql-5.3.3-27.el6_5.i686.rpm bacfa44a39325636240018421d32878e103496897d1974df1f12580765000979 php-process-5.3.3-27.el6_5.i686.rpm 5cee77398dd1aee7de472e8f19fcddfc15cddacaa562625613eb73e7c4c1e1e3 php-pspell-5.3.3-27.el6_5.i686.rpm 7ab5599813bc9770e6524bd876ee7fe191c2eefb559d06a78ebcdc824342ba45 php-recode-5.3.3-27.el6_5.i686.rpm b12b286e61f331feeb3633e5f832150de6a48fc792965c6cceda504a122fcb58 php-snmp-5.3.3-27.el6_5.i686.rpm eff1c778ebf0603c0b1f7199d123b6437f6c29ff9367a97547425b50dcea278e php-soap-5.3.3-27.el6_5.i686.rpm 802f617438b12b881473ca11fe776d3b49eeb1db41dac53874c6a0b22167d053 php-tidy-5.3.3-27.el6_5.i686.rpm ff2c84081d9b68bc26cf9ca920573bccab37348614a24ebbfcf2e55e05268b5d php-xml-5.3.3-27.el6_5.i686.rpm b30d52352aced8e7b059f17c6fad8b5bea624663d1d6c558efa3f9748f7b96db php-xmlrpc-5.3.3-27.el6_5.i686.rpm dccf1905f9206a7cadf808bd821e21ac943e38e8c30871d7d3c1fd42a89aea02 php-zts-5.3.3-27.el6_5.i686.rpm x86_64: 272d79ce508dc7450d177524634f8597ef237ce156ccc8f33d68dff9d9f544f7 php-5.3.3-27.el6_5.x86_64.rpm 891ff32ee11e40ab35ba81a3d92ed3234b07e55ed52ba9807df047685995dc92 php-bcmath-5.3.3-27.el6_5.x86_64.rpm 335a4016ca435815a6d2f0eccb1c61be038713f736075a64d4d2045ec6c7cd30 php-cli-5.3.3-27.el6_5.x86_64.rpm eff5a61b6bac8bc96a51c10bf3b227d3fcf28b797e0e4f5a5ad7ebd0a028bf67 php-common-5.3.3-27.el6_5.x86_64.rpm dfd54a93058dc555b690cf48cb3b869df89a747a24a61f622d7bbf28209a3ace php-dba-5.3.3-27.el6_5.x86_64.rpm 649a647bc60f2fe222855a75b4c2b6326b90adb16eaf6190952b07459bddcce0 php-devel-5.3.3-27.el6_5.x86_64.rpm b48546e90ab7421629f3c6ec8f0ea318ced4de21ac99cbaee28c7beaa0f78496 php-embedded-5.3.3-27.el6_5.x86_64.rpm 45a2be64df0e909ac9379d4a5d17e18fa0583140f821c4a9263ac1f1fe197d6a php-enchant-5.3.3-27.el6_5.x86_64.rpm 3c8c3af87bfcac6fcdedf7afa95938a8f17e8eadfea9ef13a83a656fb6173112 php-fpm-5.3.3-27.el6_5.x86_64.rpm dfcfb37848ad266e13e4efc77606853bf08e2b0472793a7ba745b47747f80f8f php-gd-5.3.3-27.el6_5.x86_64.rpm 75983ebd984dd9f3a4993e381bb752f6866a06b08187dc74b7bc78e44504d569 php-imap-5.3.3-27.el6_5.x86_64.rpm 9b754e23f9798312d6f82b28adeafb692889a9dac7da998787149569db24a647 php-intl-5.3.3-27.el6_5.x86_64.rpm a25c032a9b546b65a1f8defd85ffef9cfc3655971ab037b22d02852f05bed89f php-ldap-5.3.3-27.el6_5.x86_64.rpm da8c51fbeaa6e3b6b7d80f68e025732af62ea436e9dd0c09cea268d3c9722fad php-mbstring-5.3.3-27.el6_5.x86_64.rpm eabe4a45410917a397bf4c4d615c63137a4bed762ad09730a89ac69c7fed0598 php-mysql-5.3.3-27.el6_5.x86_64.rpm 68eead6d13d3b6296ecf76451d805133a93e0a116306d84bd62e384f1b58a0fe php-odbc-5.3.3-27.el6_5.x86_64.rpm 0d281daba2530210c0df298aed1a8e42a733f813eb0c105530c7a6691e4ad377 php-pdo-5.3.3-27.el6_5.x86_64.rpm 4912666c14c6258e871a540c7c5f11874d7ad685176cc522d60d1e6c8e5438ca php-pgsql-5.3.3-27.el6_5.x86_64.rpm 8a9ab804daa8dda5fabd1cbfcd2c974ed8beea8afde9f17eaa087cb2ffc3a692 php-process-5.3.3-27.el6_5.x86_64.rpm 96395e9cb32782dd3667ae10e4157231b5fa85e8feb4ad793881e7818c934f21 php-pspell-5.3.3-27.el6_5.x86_64.rpm 93ef30275b093078156d4da25e8eaeb8352d5eef1e72442da391175c70d1958b php-recode-5.3.3-27.el6_5.x86_64.rpm b3890ad9a9ae9da88c90c4acb80470e9dc29b8d30f9e8af4f2bfa10ae2ac68dc php-snmp-5.3.3-27.el6_5.x86_64.rpm 2ad143592f03b0f4f14f145cafb3742b1aa70caf7578f3886584ad511f3c7884 php-soap-5.3.3-27.el6_5.x86_64.rpm b967d675df8291fdfb9c3fa632ea493e0479ec0decf0390bf942ac520684ed61 php-tidy-5.3.3-27.el6_5.x86_64.rpm 9ea24ffa7f7ec8291e3c04d4ff86930ae4a37ce20016eda103704be22e0e4eb6 php-xml-5.3.3-27.el6_5.x86_64.rpm 979bdf479e1b9761526947381ce7dbaccff7a470cfc0a3e806e8041b19ed49af php-xmlrpc-5.3.3-27.el6_5.x86_64.rpm 4c2f327d42674279cc82003ebf0387b08c4f773367a370db20fabe4bfb668e25 php-zts-5.3.3-27.el6_5.x86_64.rpm Source: 2fcbb1bbe4d88a57c8c68f7f360b6df75b0788f7eab435268bc2b79fdfdf2120 php-5.3.3-27.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 11 Dec 2013 09:34:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1814 Critical CentOS 5 php Update To: centos-announce(a)centos.org Message-ID: <20131211093401.GA26989(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1814 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1814.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: afa35fdf0e34067da4922d16b1fa907aa1a60be806e6b8a0da2e9435b18291dc php-5.1.6-43.el5_10.i386.rpm a07818be842caa29fed37b2dab86f6408b4b2ce100bcc4560c3fd9f1d499774a php-bcmath-5.1.6-43.el5_10.i386.rpm 205eac9bd4728804b86cc8a8d779d3d3229a72fa24768a1df1430240c9410881 php-cli-5.1.6-43.el5_10.i386.rpm 63714f0c7dcf7ecea1fc90ac15e677e4b3b1d16f13a325ab5ef78a354475bef2 php-common-5.1.6-43.el5_10.i386.rpm 9c7b4aa8b7fc5a6207b4337686007f43ec1cc088f640803bbae744ee8963f228 php-dba-5.1.6-43.el5_10.i386.rpm ffc8d3ea4e8878febe8f0b5e7133ea1eb9009693c91955699d85fcf1472547e5 php-devel-5.1.6-43.el5_10.i386.rpm 6ef185eeaadedd4b8b837d87bbb00db8c33ae1a7f721b704c324bd8e59cdfc66 php-gd-5.1.6-43.el5_10.i386.rpm 2efea9d750c3f319c7b903c48e8dae8a2c5fcc6f4de1c6ef91164132dd8f0c88 php-imap-5.1.6-43.el5_10.i386.rpm 53aacfe66d17ecb780317cbfbec2954b412c5c91740ab1187d7a524b3c8e14a8 php-ldap-5.1.6-43.el5_10.i386.rpm b099deb7054f8e1390434377470ddfd9fbb077c702bb42bd9e6c8465d51b7a7c php-mbstring-5.1.6-43.el5_10.i386.rpm 2e93fe4725b88168ea285ff7efd0d6ae2c91daa806b880d414a6a212e4e4e66d php-mysql-5.1.6-43.el5_10.i386.rpm b2a6a3467c11a2b9745072c67075c0ae467c60c3ffb8429edc991fae24331aea php-ncurses-5.1.6-43.el5_10.i386.rpm 913368b5da83d3180f528b3a3a89d0a8f327e3f7f0866574dd510ac48c3502dc php-odbc-5.1.6-43.el5_10.i386.rpm 1481acb92f379c23f1c88d3d5dde3ba9fbb911f5bff7190770d8312e4f1e1381 php-pdo-5.1.6-43.el5_10.i386.rpm eea66041c373b5124ffc6334e888b446dbe60ef26401dd2f296befc7ac5f60ec php-pgsql-5.1.6-43.el5_10.i386.rpm eab87baaf3148a97d88e1286c562564e3f525a47a759ec4e5ac9a2e882b719f4 php-snmp-5.1.6-43.el5_10.i386.rpm eb0960b8f22607d9b0c99f69c21882be5279ba5d66268bf4ffb9fd8897a5fdb6 php-soap-5.1.6-43.el5_10.i386.rpm 7f8d1e040f5ec76b44fa91258f0836e02b9dabb51e937ae8d83d8a341161800f php-xml-5.1.6-43.el5_10.i386.rpm 572cc9db6ecbbb0335f93100d966be772d78fd51bed9d3369a6d518fd1c2664a php-xmlrpc-5.1.6-43.el5_10.i386.rpm x86_64: cc4147c939d63c9f41d6d048d4ab8a46e5be87cd570d17283f3eee9e0ffb51d1 php-5.1.6-43.el5_10.x86_64.rpm 18218adbbfd1a7f4a78e1268a73131d4efa5cf321eca1f774b0833be9486d5da php-bcmath-5.1.6-43.el5_10.x86_64.rpm 78fc8d21b8b2965f827e78be168464977b3ec26027a88417946a45b443f1bdbb php-cli-5.1.6-43.el5_10.x86_64.rpm d063bf3bb23120eff2f1b0645dbd7f65b592f5637a554d8f1aa8f7acbcb3db71 php-common-5.1.6-43.el5_10.x86_64.rpm 6f932ad9fe8a4f0f66cc5d7c7e6230a95dd0e88e6c22e94151f5759b9d93598b php-dba-5.1.6-43.el5_10.x86_64.rpm 5e2033af8d9ff339375e409054b1e7159a7b4ff3c5b3b8954056b19ce98a88b0 php-devel-5.1.6-43.el5_10.x86_64.rpm d91b49d276840301c3f165d25809cc8287be1252cd31ad27d4f08050a5dcd0dd php-gd-5.1.6-43.el5_10.x86_64.rpm 9051b256f6ebc42189e51045effc4e233d6006e31066102aa52f6bb3c4605d5d php-imap-5.1.6-43.el5_10.x86_64.rpm 8ca766f26874c2eb2d98ef62413994e54bc0478ef32c6021fd4563a8268dc228 php-ldap-5.1.6-43.el5_10.x86_64.rpm e71c5a7e9d1ba92d49bb5f796584398647f189e120a9ff6fa0d9d677be2411b6 php-mbstring-5.1.6-43.el5_10.x86_64.rpm 0f619209a314b13ed1aa5b5d9256286a40262a59d35d146ae38025551891e2fd php-mysql-5.1.6-43.el5_10.x86_64.rpm ff9e7dc1526bfaf36f1a5718393d047e15155ebd3d5ec62efa6cf147f8c2584c php-ncurses-5.1.6-43.el5_10.x86_64.rpm 345960ce6462b7d2bc08d3018fd43a43540912e31bd33a268c635ceb82aa05d2 php-odbc-5.1.6-43.el5_10.x86_64.rpm 35b6f25930c18adea077a8450921c16b632b3152b1a13296799817fc208a2fee php-pdo-5.1.6-43.el5_10.x86_64.rpm d8a35f01e2eb5fa64534219c59110bd0104c2c9594ba70d2383710be93f84912 php-pgsql-5.1.6-43.el5_10.x86_64.rpm ac916685656a8488ebc140924172955e7c0cf95f6e03d51ce1f4014f398bb429 php-snmp-5.1.6-43.el5_10.x86_64.rpm d9a2ec55911ce87ad77ec242936852893b58064cd93019347171443349e3e864 php-soap-5.1.6-43.el5_10.x86_64.rpm 4f89919c48b732d63b4cb7c34d2afa221d214dbe0c1c47700032b43d994a573d php-xml-5.1.6-43.el5_10.x86_64.rpm a570815bb7f7c43b6e5088928751712f872e15a7ecdd112866e2ddf7dc39632f php-xmlrpc-5.1.6-43.el5_10.x86_64.rpm Source: ee42b2385274f5516d82f0c546d7efe574ac2264993e55da2319ebb9fb8bdfc3 php-5.1.6-43.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 11 Dec 2013 09:54:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1813 Critical CentOS 5 php53 Update To: centos-announce(a)centos.org Message-ID: <20131211095426.GA27263(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1813 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1813.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c64d25b7e7a1a85ec002c7506f138b397e2eda8ec0f9f50f49dfc1ae4bc6123f php53-5.3.3-22.el5_10.i386.rpm 91926626c1bc1124f84458c96f8fc25147ea9537ac8c87c625cb7662aeb43cf2 php53-bcmath-5.3.3-22.el5_10.i386.rpm 672a8a4ee57dd8445ad316593cd45359356620551d15a3e6c299e27dfe57d468 php53-cli-5.3.3-22.el5_10.i386.rpm 453cffc4973440a7be4c5d8d0939d7b86888a44a9cf008f3191802a7437530c0 php53-common-5.3.3-22.el5_10.i386.rpm 374a31d7340310ee9a79e8b17c072a9d546e674573f9243c2c4c73947cdfed1c php53-dba-5.3.3-22.el5_10.i386.rpm 7950c16294265ec6766f5e629bd080dcee7ab5ccadb1b9595fd2caaebe393ae6 php53-devel-5.3.3-22.el5_10.i386.rpm d8b17fe006cd8997498321df5f64bb0012e83afda01a0a4b97650cf4f167a744 php53-gd-5.3.3-22.el5_10.i386.rpm 8d1bb0bac4ab35f4ca8489afdcdc81009f0844082383aad50b37affedc63329f php53-imap-5.3.3-22.el5_10.i386.rpm 37c6f2d849158d63a4562e7feb26bb5f9184334f8f01d63238f983991084e597 php53-intl-5.3.3-22.el5_10.i386.rpm 02f1e09dcfb67e6932ee966767d17fff039be41887359f0b8d5de4d4a2d04548 php53-ldap-5.3.3-22.el5_10.i386.rpm 40103c812d65c9ef122c8c38bfd0440fd7ebdd6f266133f3b220c8e6d12aff78 php53-mbstring-5.3.3-22.el5_10.i386.rpm 59c3d40f9d4195a2851d5a9838450729b19c47680a7d8ce1c38122131a5dd894 php53-mysql-5.3.3-22.el5_10.i386.rpm fbaaafc7cad83c53232acb9d181fdf4ee5dd08c5865859a69b8369ebc234319c php53-odbc-5.3.3-22.el5_10.i386.rpm c5dfa0dff11a125d2605597a9567cf2dff9e79d86c385e0f6df984fdc6971fe8 php53-pdo-5.3.3-22.el5_10.i386.rpm 382edb19c81d03f90ce01a198d770a347db9f81b7b4b1e1d143ae40b53520a46 php53-pgsql-5.3.3-22.el5_10.i386.rpm c73514bfd04ce48c4c85a5a3b5b5f2b5e7bf76de315df7c79913e221babc96a5 php53-process-5.3.3-22.el5_10.i386.rpm 2c959611a0bd417935c47d1d08c175f9bb1c8342042592ee68236c51ab5504ab php53-pspell-5.3.3-22.el5_10.i386.rpm 0f6b5d4513c702b0f587e90117c301177354593264d98f7b9630bd54e9e630a3 php53-snmp-5.3.3-22.el5_10.i386.rpm 1f67ff09c3531565d998a8240b6a003bd770dfb317823558ce2b150a26c4de50 php53-soap-5.3.3-22.el5_10.i386.rpm 26a92f7fb136ed9f625df4787feb4707ba07181ec46152bb3a425aff1d93bddc php53-xml-5.3.3-22.el5_10.i386.rpm 431cd3f86ebc674224e350baab0090c92ec7c38992db19684e5b77ac59d04634 php53-xmlrpc-5.3.3-22.el5_10.i386.rpm x86_64: 17f2d7c7b56b5e8b9e84e9eb15c06b75681a7071d68e516b7a8ad5526dc5dc69 php53-5.3.3-22.el5_10.x86_64.rpm dae1b4e201dada35e23b44dc3bf304b50d492ca646028a3d5cc1a2dd6d0e42e9 php53-bcmath-5.3.3-22.el5_10.x86_64.rpm fadb9fd6c3679e94a94968b9ce29db4331dc39437afd91705e709e01f3dc3696 php53-cli-5.3.3-22.el5_10.x86_64.rpm 9c4a4463cf936c07884038fb810affd885f6ed8d44deb36a4b12e627d4713d3e php53-common-5.3.3-22.el5_10.x86_64.rpm 04d759c231ea27beed22897c75be8240eba410fd0f8b9c3a9bd8fb4a2f908b2d php53-dba-5.3.3-22.el5_10.x86_64.rpm 8350cecb3b5a6ec5227c3b9335ab429dc14538818ee331a41c5c7ad8e0cb7ca8 php53-devel-5.3.3-22.el5_10.x86_64.rpm 31af52358f6fdf1b22b90a47775a59ebc94b61669f5821c878fca287f8dbf388 php53-gd-5.3.3-22.el5_10.x86_64.rpm 0a90527c6c3c8c670c34ed92e000e7cc317c8596f81d02b9b9349d456b4d0645 php53-imap-5.3.3-22.el5_10.x86_64.rpm 30e7a0f1bf953896774adb2616be290c4aacb22b1c17b084b76a9efa1ad18ad5 php53-intl-5.3.3-22.el5_10.x86_64.rpm 42a727f833cc77b1d98754a990392bf88563019f2f41b28e30ed7a3e2eeeac38 php53-ldap-5.3.3-22.el5_10.x86_64.rpm 0e52a405d51cfede349ff0f6c96ad1e16234ddc5b35d38dfb5d64509e3f07fd0 php53-mbstring-5.3.3-22.el5_10.x86_64.rpm f41e1cfcece21a4ff06ffbbe3e30b8d7829041c8d63817989ddc906df52141bb php53-mysql-5.3.3-22.el5_10.x86_64.rpm ab31a8f8ff4e92b086d963918f63602eee93137215c56987fb400da326ffe6ea php53-odbc-5.3.3-22.el5_10.x86_64.rpm cbf1371def561f700dd985c14397921bbdfcf08833acdf0d4772e0d1beef6856 php53-pdo-5.3.3-22.el5_10.x86_64.rpm 4b2acb12bab5dbfd5c674009a6b4e2eedcf388fa91b292a5478d511f83ab60ea php53-pgsql-5.3.3-22.el5_10.x86_64.rpm 817001f00284b383d492bf105e9f2cf0c49458c0932839344a1562bf86557cbf php53-process-5.3.3-22.el5_10.x86_64.rpm c3a54dc137946f7a4cb79594688a1dd5b87835d4b876e635f65b5cf31a6a50f4 php53-pspell-5.3.3-22.el5_10.x86_64.rpm 4d4e8097f961d3f366356683d749f252d5e935fe5dd2be8dc838a8f1f0591810 php53-snmp-5.3.3-22.el5_10.x86_64.rpm a38c64ef0cb4fb5f09827e7d10d9da104d20b12ae4531e04f122d50b46420a11 php53-soap-5.3.3-22.el5_10.x86_64.rpm 34175c983b046d57bc8a0a9f61e1fc07431c16e29b44cfc3a14f96043284b8c2 php53-xml-5.3.3-22.el5_10.x86_64.rpm 2c25d01b6394920e212df85c3baf81105b3df8573fd5893ee7720338118ac40f php53-xmlrpc-5.3.3-22.el5_10.x86_64.rpm Source: 08301e902562d500a03652e73d99d74f0e3a69a4c699fae4a9ab9ccd801bf73b php53-5.3.3-22.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Wed, 11 Dec 2013 10:23:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1819 CentOS 6 spice-server Update To: centos-announce(a)centos.org Message-ID: <20131211102351.GA13507(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1819 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1819.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 06992da054916ee66f7349329ad41bb5c342d817e329cb0e5019d3525331a90e spice-server-0.12.4-6.el6_5.1.x86_64.rpm 515bbd99bfa8a4bd97b0b54ce29cea9a6d8c8f1f71ee7ea7c0766ecbbec261df spice-server-devel-0.12.4-6.el6_5.1.x86_64.rpm Source: bd4a9cfe1cf12ba55a7be1ddce4e1469ee30e52ea93aee1fd47aa29cc3d2b79f spice-server-0.12.4-6.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 11 Dec 2013 10:24:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1820 CentOS 6 pacemaker Update To: centos-announce(a)centos.org Message-ID: <20131211102428.GA13876(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1820 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1820.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: afd1e9f33b9895e51d296ae7df34ea34e5374d2e3027d8fcd681747feafbcda6 pacemaker-1.1.10-14.el6_5.1.i686.rpm de7cd0682edb422e7d17e8f0b489aa68ee1d9695415a502a8bdaee3e4f3c6419 pacemaker-cli-1.1.10-14.el6_5.1.i686.rpm 7238606718bef56a80b683f70509fb6783a433e50ef65aba38f7a09b02d928bf pacemaker-cluster-libs-1.1.10-14.el6_5.1.i686.rpm 00014e226bc83ed1a7f441be9b4f2edf3d2b5513db91ae1f18d1c588184f8488 pacemaker-cts-1.1.10-14.el6_5.1.i686.rpm 95fbfa8f56b6553f3e1b38e5bb149c1abfb6979bbdf0e5b5c3894f2d41b1e96f pacemaker-doc-1.1.10-14.el6_5.1.i686.rpm 94efcf761a7493cdf72cb1a848949931fb8ae26a3efb85fb0bbe66e66e72d597 pacemaker-libs-1.1.10-14.el6_5.1.i686.rpm 13f3bff0887ffac791d98da0c83b5cad28e50b2a540277b7c280f7b3cc528379 pacemaker-libs-devel-1.1.10-14.el6_5.1.i686.rpm 64adf80bbcdb77c70000ee459b7b4c133f08c0df413fd5a2175d2cd58b83285e pacemaker-remote-1.1.10-14.el6_5.1.i686.rpm x86_64: 66d10c75d7107d39ef922be2828577641c2712a56e3f0626f1c526a90668d77d pacemaker-1.1.10-14.el6_5.1.x86_64.rpm 36850436f69f260ebdc5076cd2e289d4128edd6ae641485b684af402cb05df0d pacemaker-cli-1.1.10-14.el6_5.1.x86_64.rpm 7238606718bef56a80b683f70509fb6783a433e50ef65aba38f7a09b02d928bf pacemaker-cluster-libs-1.1.10-14.el6_5.1.i686.rpm f549f19932700393664d9284f8add1cbdd2de281a5c214a697d7a197c9efedb1 pacemaker-cluster-libs-1.1.10-14.el6_5.1.x86_64.rpm 9e30453c4678d81f106782dc38dc2325e3d7c4014d3d4ea627cddeeeeee00b73 pacemaker-cts-1.1.10-14.el6_5.1.x86_64.rpm e257d660bb2bebeeb73629ae519e3dbbc28a273ec38a8f0f030042d5678043f9 pacemaker-doc-1.1.10-14.el6_5.1.x86_64.rpm 94efcf761a7493cdf72cb1a848949931fb8ae26a3efb85fb0bbe66e66e72d597 pacemaker-libs-1.1.10-14.el6_5.1.i686.rpm 8fd246d39e99252ae8565aa6a8ba900a37e46500dd89dca710bcdc1b79452a16 pacemaker-libs-1.1.10-14.el6_5.1.x86_64.rpm 13f3bff0887ffac791d98da0c83b5cad28e50b2a540277b7c280f7b3cc528379 pacemaker-libs-devel-1.1.10-14.el6_5.1.i686.rpm 0f7e71a6b9b3ea848f0c9b8d3f10ef998902c458441ebaac3c6a9601a5b54448 pacemaker-libs-devel-1.1.10-14.el6_5.1.x86_64.rpm 0c0c409dd1e1245898c18213e2a19cc2dffef949130772cfc639d87808bbd160 pacemaker-remote-1.1.10-14.el6_5.1.x86_64.rpm Source: f5761596f9e323e12d1d5b0219febf03e963ec5942bc3e4ae1844cf18653be97 pacemaker-1.1.10-14.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 6 ***********************************************

1 0

Upgrade to CentOS 6.5 -> issue with Broadcom Wifi
by wwp 10 Dec '13

10 Dec '13

Hello there! I was running CentOS 6.4 system on my Dell Latitude E6530 flawlessly, until I upgraded to CentOS 6.5. Now the wifi doesn't show up (it's a Broadcom Wifi BT4313, 14e4:4727), I tried to follow the steps from http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom but when attempting to compile the Broadcom driver module, the make command fails in a way that is not described on this web page. Anyway, the page deals w/ CentOS5 without being specific. I tried w/ both hybrid-portsrc_x86_64-v5_100_82_112.tar.gz (the one which *I think* was formerly installed) and the latest available: hybrid-v35_64-nodebug-pcoem-6_30_223_141.tar.gz; same compilation errors (see below). I simply could not remember how I had the Broadcom Wifi chip working since CentOS 6.x, but I clearly remember that I had to install the driver (I presume from the sources since I've found them in my setup archives, but not sure). I have the following RPM's installed: b43-openfwwf-5.2-4.el6.noarch b43-fwcutter-012-2.2.el6.x86_64 I wonder if the kernel update breaks it.. Does any one have experience with this driver and CentOS 6.5? Here is make's output: # make make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. CFG80211 API is prefered for this kernel version Using CFG80211 API /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:64: warning: 'enum tx_power_setting' declared inside parameter list /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:64: warning: its scope is only this definition or declaration, which is probably not what you want /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_cfg80211_join_ibss': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:745: error: 'struct cfg80211_ibss_params' has no member named 'channel' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: At top level: /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1110: warning: 'enum tx_power_setting' declared inside parameter list /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1110: error: parameter 2 ('type') has incomplete type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_cfg80211_set_tx_power': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1123: error: 'TX_POWER_AUTOMATIC' undeclared (first use in this function) /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1123: error: (Each undeclared identifier is reported only once /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1123: error: for each function it appears in.) /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1125: error: 'TX_POWER_LIMITED' undeclared (first use in this function) /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1131: error: 'TX_POWER_FIXED' undeclared (first use in this function) /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: At top level: /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1644: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1649: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1650: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1651: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1652: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1653: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1654: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1658: warning: initialization from incompatible pointer type /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_inform_single_bss': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:1817: error: too few arguments to function 'ieee80211_channel_to_frequency' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_update_bss_info': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2077: error: 'struct cfg80211_bss' has no member named 'information_elements' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2078: error: 'struct cfg80211_bss' has no member named 'len_information_elements' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2080: warning: passing argument 1 of 'cfg80211_put_bss' from incompatible pointer type include/net/cfg80211.h:3380: note: expected 'struct wiphy *' but argument is of type 'struct cfg80211_bss *' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2080: error: too few arguments to function 'cfg80211_put_bss' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_bss_roaming_done': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2117: warning: passing argument 2 of 'cfg80211_roamed' from incompatible pointer type include/net/cfg80211.h:3726: note: expected 'struct ieee80211_channel *' but argument is of type 'u8 *' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2117: warning: passing argument 4 of 'cfg80211_roamed' makes pointer from integer without a cast include/net/cfg80211.h:3726: note: expected 'const u8 *' but argument is of type 's32' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2117: warning: passing argument 5 of 'cfg80211_roamed' makes integer from pointer without a cast include/net/cfg80211.h:3726: note: expected 'size_t' but argument is of type 'u8 *' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2117: warning: passing argument 6 of 'cfg80211_roamed' makes pointer from integer without a cast include/net/cfg80211.h:3726: note: expected 'const u8 *' but argument is of type 's32' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2117: error: too few arguments to function 'cfg80211_roamed' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c: In function 'wl_bss_connect_done': /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2149: warning: passing argument 2 of 'cfg80211_roamed' from incompatible pointer type include/net/cfg80211.h:3726: note: expected 'struct ieee80211_channel *' but argument is of type 'u8 *' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2149: warning: passing argument 4 of 'cfg80211_roamed' makes pointer from integer without a cast include/net/cfg80211.h:3726: note: expected 'const u8 *' but argument is of type 's32' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2149: warning: passing argument 5 of 'cfg80211_roamed' makes integer from pointer without a cast include/net/cfg80211.h:3726: note: expected 'size_t' but argument is of type 'u8 *' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2149: warning: passing argument 6 of 'cfg80211_roamed' makes pointer from integer without a cast include/net/cfg80211.h:3726: note: expected 'const u8 *' but argument is of type 's32' /usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.c:2149: error: too few arguments to function 'cfg80211_roamed' make[2]: *** [/usr/local/src/hybrid-wl/src/wl/sys/wl_cfg80211.o] Error 1 make[1]: *** [_module_/usr/local/src/hybrid-wl] Error 2 make: *** [all] Error 2 Regards, -- wwp

4 6

- install centos via usb stick
by Paolo De Michele 10 Dec '13

10 Dec '13

hello everybody, before you come to write this post I checked the official documentation of centos. to be brief: - I format my usb pendrive in fat - Using the command dd if =name.iso of =/dev/sdx (with or without bs for the purposes of issue, and 'indifferent) Restart the system and remains in the screen with the cursor flashing (infinity) I also tried with other distributions and every time I get the same result side bios and there 'no setting for secure boot or similar can you give me a hand please? thanks in advance best regards

3 2

Vinagre 3.10.2 and intltool
by Fabrizio Di Carlo 10 Dec '13

10 Dec '13

Hello to all, I wanted to update vinagre to the latest one but when I launch ./configure I obtained the following error: checking for intltool >= 0.50.0... 0.41.0 found configure: error: Your intltool is too old. You need intltool 0.50.0 or later. Do you know if there is a way to upgrade intltool without upgrade too much stuff? Fabrizio -- "The intuitive mind is a sacred gift and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." (A. Einstein) "La mente intuitiva è un dono sacro e la mente razionale è un fedele servo. Noi abbiamo creato una società che onora il servo e ha dimenticato il dono." (A. Einstein) Fabrizio Di Carlo

1 0

Centos6.5 Intel Corporation Centrino Advanced-N 6235 not working
by Johan Vermeulen 10 Dec '13

10 Dec '13

Dear All, i'm working on this Centos6.5 laptop, fully updated *# uname -a** **Linux jvermeulen.ict 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux* It's an Acer Aspire E1-571. I can't get the Intel Centrino N 6235 to work. I've used this card on several different types of laptops and never had any trouble. I think I have the packages installed for this card : *[root@jvermeulen jvermeulen]# yum list installed | grep wireless** **wireless-tools.x86_64 1:29-5.1.1.el6 @base ** **[root@jvermeulen jvermeulen]# yum list installed | grep iwl** **iwl100-firmware.noarch 39.31.5.1-1.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl1000-firmware.noarch 1:39.31.5.1-1.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl3945-firmware.noarch 15.32.2.9-4.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl4965-firmware.noarch 228.61.2.24-2.1.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl5000-firmware.noarch 8.83.5.1_1-1.el6_1.1 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl5150-firmware.noarch 8.24.2.2-1.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl6000-firmware.noarch 9.221.4.1-1.el6 @base ** **iwl6000g2a-firmware.noarch 17.168.5.3-1.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **iwl6050-firmware.noarch 41.28.5.1-2.el6 @anaconda-CentOS-201207061011.x86_64/6.3** **python-iwlib.x86_64 0.1-1.2.el6 @base* and I see no EM: *03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)** ** Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN** ** Flags: fast devsel, IRQ 17** ** Memory at c0500000 (64-bit, non-prefetchable) [size=8K]** ** Capabilities: [c8] Power Management version 3** ** Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+** ** Capabilities: [e0] Express Endpoint, MSI 00** ** Capabilities: [100] Advanced Error Reporting** ** Capabilities: [140] Device Serial Number b4-b6-76-ff-ff-5f-fc-cb** ** Kernel modules: iwlwifi** ** **[root@jvermeulen jvermeulen]# modprobe -v iwlwifi** **[root@jvermeulen jvermeulen]#* Still wireless is not showing up. *[root@jvermeulen jvermeulen]# iwconfig** **lo no wireless extensions.** ** **eth0 no wireless extensions.** ** **virbr0 no wireless extensions.** ** **virbr0-nic no wireless extensions.** ** **ppp0 no wireless extensions.** ** **tun0 no wireless extensions.* What am I doing wrong? Friendly regards, J. -- Johan Vermeulen IT-medewerker Opensource Software is the future.

5 7

about C program of CPP macro problems
by Nicol TAO 10 Dec '13

10 Dec '13

Hello, all: I have a program problem, ( may it not have close releationship with Debian), it described like this: I want to using #define / #undef, and want to put them in a single macro, some thing like: #define DECALRE_TYPE(type) \ { #undef __curr_type; #define _curr_type type; } as we know, this can not passed with CPP, but I need this logical here. Generally, the problem comes from #define ser_field(type, var) \ ser_new_field(tra, #type, #var, offsetof(struct_type, var)) I do not want another additional parameter in this macro like #define ser_field(type,var,struct_type), and I want a sentence declare "current struct type" and all later work of ser_field will defaultly use this type. I am not sure whether I can express it clearly, any ideas will be greately appreciated! Thanks and B.R. 2013/12/10 John Doe <jdmls(a)yahoo.com> > From: Lars Hecking <lhecking(a)users.sourceforge.net> > > > One thing I have noticed on CentOS6 is that rsync via xinetd never > > works after a reboot. It always takes an additional, post-reboot > > service xinetd restart to get it going. That has been the same for > > all revisions up to and including 6.5, and I've seen it on more than > > just machine. > > > > While I don't see such a message on other problem machines, the latest > > reboot gave me a clue: > > > > Dec 9 23:28:36 host xinetd[21131]: bind failed (Address already in use > (errno = > > 98)). service = rsync > > Dec 9 23:28:36 host xinetd[21131]: Service rsync failed to start and is > > deactivated. > > > > Is there any way to debug this? I suspect it needs to be debugged > > during reboot since the service starts up fine later. > > "Address already in use" => check what is listening on port 873? > In the rsync xinetd conf it says IPv6 here... > > JD > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

2 1

CentOS6 xinetd failure
by Lars Hecking 10 Dec '13

10 Dec '13

One thing I have noticed on CentOS6 is that rsync via xinetd never works after a reboot. It always takes an additional, post-reboot service xinetd restart to get it going. That has been the same for all revisions up to and including 6.5, and I've seen it on more than just machine. While I don't see such a message on other problem machines, the latest reboot gave me a clue: Dec 9 23:28:36 host xinetd[21131]: bind failed (Address already in use (errno = 98)). service = rsync Dec 9 23:28:36 host xinetd[21131]: Service rsync failed to start and is deactivated. Is there any way to debug this? I suspect it needs to be debugged during reboot since the service starts up fine later.

3 4

CentOS-announce Digest, Vol 106, Issue 5
by centos-announce-request＠centos.org 10 Dec '13

10 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1797 CentOS 6 libcgroup Update (Johnny Hughes) 2. CEBA-2013:1795 CentOS 6 freeipmi Update (Johnny Hughes) 3. CEBA-2013:1798 CentOS 6 cluster Update (Johnny Hughes) 4. CEBA-2013:1800 CentOS 5 ntp Update (Johnny Hughes) 5. CESA-2013:1804 Moderate CentOS 5 libjpeg Update (Johnny Hughes) 6. CESA-2013:1803 Moderate CentOS 6 libjpeg-turbo Update (Johnny Hughes) 7. CESA-2013:1805 Important CentOS 6 samba4 Update (Johnny Hughes) 8. CESA-2013:1806 Important CentOS 6 samba Update (Johnny Hughes) 9. CESA-2013:1806 Important CentOS 5 samba3x Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 9 Dec 2013 11:05:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1797 CentOS 6 libcgroup Update To: centos-announce(a)centos.org Message-ID: <20131209110512.GA29029(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1797 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1797.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9a39c9616d3f1fbe1676a4ca2c69bde4a350231f588524b963cea5d9675cbdf6 libcgroup-0.40.rc1-5.el6_5.1.i686.rpm 0f6f998024bab0d60bb98eff0e41ea5f591e9a82a3b56308bd704c93b1e02776 libcgroup-devel-0.40.rc1-5.el6_5.1.i686.rpm e8339961f77d64db76660a28cd3365dcfbf4a7b7484faadb4c9a7bc5268c7146 libcgroup-pam-0.40.rc1-5.el6_5.1.i686.rpm x86_64: 9a39c9616d3f1fbe1676a4ca2c69bde4a350231f588524b963cea5d9675cbdf6 libcgroup-0.40.rc1-5.el6_5.1.i686.rpm 144dd8e68cab893faec6a9e36b86a123d7ac97680e9b7627f5bfe164c976f409 libcgroup-0.40.rc1-5.el6_5.1.x86_64.rpm 0f6f998024bab0d60bb98eff0e41ea5f591e9a82a3b56308bd704c93b1e02776 libcgroup-devel-0.40.rc1-5.el6_5.1.i686.rpm 91f9aaeb44627f65b9e945af5380df5fe795db64bc0f6e7d3de3866830a6b8df libcgroup-devel-0.40.rc1-5.el6_5.1.x86_64.rpm e8339961f77d64db76660a28cd3365dcfbf4a7b7484faadb4c9a7bc5268c7146 libcgroup-pam-0.40.rc1-5.el6_5.1.i686.rpm 1aa452999caea39a678c2482ea939e54cb6a10096c92a27fc9abab25f51be7f7 libcgroup-pam-0.40.rc1-5.el6_5.1.x86_64.rpm Source: 2d2c8440389793518deee138f9b013df465c2b6faf0b52176abcead6631c328b libcgroup-0.40.rc1-5.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 9 Dec 2013 11:05:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1795 CentOS 6 freeipmi Update To: centos-announce(a)centos.org Message-ID: <20131209110548.GA29298(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1795 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1795.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b3b86d75aa375ff5623fd089df28905c5757e2a5ec3a508fd132270915215293 freeipmi-1.2.1-6.el6_5.i686.rpm 8310da829ad77a3ae73d255dc93ea95b9af35687e0dfc7f815547ee51f684f91 freeipmi-bmc-watchdog-1.2.1-6.el6_5.i686.rpm 27f5a74965fd5dd344e09752e3c91d692c792723407462e5fc48d99c3197218e freeipmi-devel-1.2.1-6.el6_5.i686.rpm b6cdb5566944dd5927b6155fca9b852e9c17f8dd4ea6cb14292e9dfcf466607d freeipmi-ipmidetectd-1.2.1-6.el6_5.i686.rpm x86_64: b3b86d75aa375ff5623fd089df28905c5757e2a5ec3a508fd132270915215293 freeipmi-1.2.1-6.el6_5.i686.rpm 1cc139bc1f6d6b8b6f13a025caf09fee7b07462081dd6bed1b110624e87127c8 freeipmi-1.2.1-6.el6_5.x86_64.rpm 9ea5d9d4aa73cfe5edf35ae44f5240b1aa079b097ca5a7bd62669bfcca81e48e freeipmi-bmc-watchdog-1.2.1-6.el6_5.x86_64.rpm 27f5a74965fd5dd344e09752e3c91d692c792723407462e5fc48d99c3197218e freeipmi-devel-1.2.1-6.el6_5.i686.rpm 6e08a34bc771f7d9ffeb79e2e359727a2a5a972670a1c1d203fc00d8f7e1460e freeipmi-devel-1.2.1-6.el6_5.x86_64.rpm 533714bb73b81e45c2599e7de9af8f148f32f807d534a050d70f3e8d2474ec3e freeipmi-ipmidetectd-1.2.1-6.el6_5.x86_64.rpm Source: e78cee47bb0e21d305468b911724872cf67042c413452d96a69adc951330d3a5 freeipmi-1.2.1-6.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 9 Dec 2013 11:06:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1798 CentOS 6 cluster Update To: centos-announce(a)centos.org Message-ID: <20131209110624.GA29568(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1798 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1798.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: acc62b01872e02dc107cf8b8ea62efc7835794e631f36ba03c7115190f0b4318 clusterlib-3.0.12.1-59.el6_5.1.i686.rpm 5b73075eac523a30c0664b7add2b50a1ff46063bae6f67c01357d9af1b6d8718 clusterlib-devel-3.0.12.1-59.el6_5.1.i686.rpm 5afe9a89efafa5e6a06154f53fe4a64ef5a6b2f6d711bfa35f34b1c9f8794974 cman-3.0.12.1-59.el6_5.1.i686.rpm 4ac554619aadc8cd81156aefb4d5dc691027557612cfe6d0e97a968f4761fb94 gfs2-utils-3.0.12.1-59.el6_5.1.i686.rpm x86_64: acc62b01872e02dc107cf8b8ea62efc7835794e631f36ba03c7115190f0b4318 clusterlib-3.0.12.1-59.el6_5.1.i686.rpm e2c617d359912cd354a2bea7d75d8c63b41e5507783bf63447c98c78a8252b14 clusterlib-3.0.12.1-59.el6_5.1.x86_64.rpm 5b73075eac523a30c0664b7add2b50a1ff46063bae6f67c01357d9af1b6d8718 clusterlib-devel-3.0.12.1-59.el6_5.1.i686.rpm ba0fd63a0055a6375fb0170d1118e2ae8233aed6999c58ccd4861c7f28f90cd9 clusterlib-devel-3.0.12.1-59.el6_5.1.x86_64.rpm 9e2eabacad3ce850fcba98ecf39f1b04de09e19a3b11552544685cc08ab28a0f cman-3.0.12.1-59.el6_5.1.x86_64.rpm e99e26931f30cc3b241e27e5fd91f8b49343f53aa8edff03b806fb08a401894a gfs2-utils-3.0.12.1-59.el6_5.1.x86_64.rpm Source: cd1de7f53c5a40aed9c46e3141387bb404562795de0df481b0707fe16294fac2 cluster-3.0.12.1-59.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 9 Dec 2013 14:55:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1800 CentOS 5 ntp Update To: centos-announce(a)centos.org Message-ID: <20131209145547.GA2475(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1800 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1800.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dab86f0d267fbc79190f2501a5dd10b500230e4dc97ee3ed05b909b932655c70 ntp-4.2.2p1-17.el5.centos.i386.rpm x86_64: 8dbecbd5aead22a3ebb7b11b8cb4eb0d719956fc286830990fd9df7e65f34c0f ntp-4.2.2p1-17.el5.centos.x86_64.rpm Source: 8fd7258add2fc27f66cde4eb7c156bfbe25731a3ae51a5aa18e5fb31123a423f ntp-4.2.2p1-17.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 10 Dec 2013 00:47:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1804 Moderate CentOS 5 libjpeg Update To: centos-announce(a)centos.org Message-ID: <20131210004748.GA30966(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1804 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1804.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d8b2b51377426670a74afc325debda1b35b76fb20d1d77caff49d451c5e0d78c libjpeg-6b-38.i386.rpm 981357aecac5afd28b58196cba54b7923df90e9df04131dbeea286c665592094 libjpeg-devel-6b-38.i386.rpm x86_64: d8b2b51377426670a74afc325debda1b35b76fb20d1d77caff49d451c5e0d78c libjpeg-6b-38.i386.rpm 8fcc4d30ebb3819a8c29a907e489baf8a6ec6a31cd63a6114c39a53aa64f9838 libjpeg-6b-38.x86_64.rpm 981357aecac5afd28b58196cba54b7923df90e9df04131dbeea286c665592094 libjpeg-devel-6b-38.i386.rpm cdb05703199a434d8700569652e5fa5b8d8e41a82e9f7404e417f0862451e608 libjpeg-devel-6b-38.x86_64.rpm Source: 02a186e33f8f4647ed1bd7681e9c942eed6dd50e4633b90c55f0b3aabe422022 libjpeg-6b-38.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 10 Dec 2013 01:01:49 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1803 Moderate CentOS 6 libjpeg-turbo Update To: centos-announce(a)centos.org Message-ID: <20131210010149.GA44313(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1803 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1803.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1b2a598ac9baeccd782a2ea160f9e4d2da442577ee2c745d24f44da3fd275306 libjpeg-turbo-1.2.1-3.el6_5.i686.rpm c9395cda78b5b93975d3073618605b1ba6188258c18a2fb8b9309ed5334100f4 libjpeg-turbo-devel-1.2.1-3.el6_5.i686.rpm 852a61ecb22dd3f5a1997756cce53ba66bd57a66b9f49537f6eca919eb987f11 libjpeg-turbo-static-1.2.1-3.el6_5.i686.rpm x86_64: 1b2a598ac9baeccd782a2ea160f9e4d2da442577ee2c745d24f44da3fd275306 libjpeg-turbo-1.2.1-3.el6_5.i686.rpm c3dcce9a0f3cbcc5c618fd75ed57dd993b5b74bb4cb195800b5fedef501fc825 libjpeg-turbo-1.2.1-3.el6_5.x86_64.rpm c9395cda78b5b93975d3073618605b1ba6188258c18a2fb8b9309ed5334100f4 libjpeg-turbo-devel-1.2.1-3.el6_5.i686.rpm ae3b88e018791f9078ce9fa33d97c8685d69ef6eba7dc7765d59eb72bdf4a07a libjpeg-turbo-devel-1.2.1-3.el6_5.x86_64.rpm cd03f4259c16a100d9bd13ad4d89b22d3409e35d8af1ddf3bc4ea5fccb191303 libjpeg-turbo-static-1.2.1-3.el6_5.x86_64.rpm Source: e619abbdcebe1a4b2dacf7f3a3495380fa6d68919170c81378bead39ddbe5176 libjpeg-turbo-1.2.1-3.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 10 Dec 2013 01:02:20 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1805 Important CentOS 6 samba4 Update To: centos-announce(a)centos.org Message-ID: <20131210010220.GA44790(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1805 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1805.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e7141e64be31577e8a903f912092ee72f513ad09b5f24d49cc5cfa1471dde429 samba4-4.0.0-60.el6_5.rc4.i686.rpm 7cc46c1ba75bd843051454d9cf9e95b1a95731da8bd16d30e11514090cef8e7a samba4-client-4.0.0-60.el6_5.rc4.i686.rpm cdfd1fadee2fae10233d9fbfa0293d8d1b1719ff1e4a5e437e531b5a21155c9d samba4-common-4.0.0-60.el6_5.rc4.i686.rpm 1adeec09ebfd002052133623edb6e9ad4e00da481b683bb5dd736bdd7ec9553e samba4-dc-4.0.0-60.el6_5.rc4.i686.rpm faddfb043f087c115bdf02f9cdecab103b0146559bd61e2a243369ffe2000fc2 samba4-dc-libs-4.0.0-60.el6_5.rc4.i686.rpm 4e20c9a75ef0499abb636277fcfe3af7ce7df54bde7078417e4bec3206513b91 samba4-devel-4.0.0-60.el6_5.rc4.i686.rpm 3c1b318ba6bd7b8458d0c1205fd0a9b2c103c9bab1779733d45c9110334d5155 samba4-libs-4.0.0-60.el6_5.rc4.i686.rpm 3e70c9ea524285d077755d56068c7cfb45263e71a0d59f115e3892513e53fc9d samba4-pidl-4.0.0-60.el6_5.rc4.i686.rpm 49914fd1dde964d875a042efdd8c073fe728ae3a5590ade86561f80862f3dbcf samba4-python-4.0.0-60.el6_5.rc4.i686.rpm 1ac4ad535927d76093f591885391b83bfab50caa36ca67efd9596645f1582e64 samba4-swat-4.0.0-60.el6_5.rc4.i686.rpm 8af26c29ef44869d6e2a71af1a4d6cf8eec4d47bfb3e1486404be27833dcc856 samba4-test-4.0.0-60.el6_5.rc4.i686.rpm 4c187925cffc484aa525eeb926e197dcbc9e8b4077cf2d398e2a93350e1d8b51 samba4-winbind-4.0.0-60.el6_5.rc4.i686.rpm a11f6ca95630f283186b2d4c1c5b0ffa055949048d898a1d58587e88846f0e91 samba4-winbind-clients-4.0.0-60.el6_5.rc4.i686.rpm 08d13ca3b8ad51ed4fc3ddd187dbfe15be25a232c41e6c981ababfb429bacab6 samba4-winbind-krb5-locator-4.0.0-60.el6_5.rc4.i686.rpm x86_64: 07aa5fc6e8385b0af6327f6b1de4aa904fc5ac98218ac3792a10bce3a58d2637 samba4-4.0.0-60.el6_5.rc4.x86_64.rpm 5732deaf44839f2baa344c1b4b0fb12adbc615d6b45f24983ac45da4e10cb9c3 samba4-client-4.0.0-60.el6_5.rc4.x86_64.rpm 0b90d22aaaf3322a73dfb4ac38cdab72cc290796199185266d37d6a455eb6458 samba4-common-4.0.0-60.el6_5.rc4.x86_64.rpm c216e7249a5abc3ecd486b109607ea3c6be6b4b67205f346571b6bbd802be4ed samba4-dc-4.0.0-60.el6_5.rc4.x86_64.rpm d56841d5595c7df37f4bdd88571b571d09dfe3d0cbe0620f32225a0c45fcbd8e samba4-dc-libs-4.0.0-60.el6_5.rc4.x86_64.rpm 0456372a2bdb1b0f423d9bb36c4ad6b9c3af3ebca4ccf6e744401293ea717f2d samba4-devel-4.0.0-60.el6_5.rc4.x86_64.rpm a4c43c77d8fd31615a6b4bc790f9f8fac13e92d59d4330d06880341254adfaca samba4-libs-4.0.0-60.el6_5.rc4.x86_64.rpm effb6df1aca3c94d07c6fbf6bdf62c887c180fbfa4efcdbf1066ee1e65f9d4df samba4-pidl-4.0.0-60.el6_5.rc4.x86_64.rpm aa13c26ba28b6e482d176392c82f004ea7aa60848229758819c6d3d76ceb70a9 samba4-python-4.0.0-60.el6_5.rc4.x86_64.rpm 1fded216d2461da27658c259be64d20064f70ef86a38920e4c078391ea952ee9 samba4-swat-4.0.0-60.el6_5.rc4.x86_64.rpm 0a0c3735055da2acec1d29eeafceaad779e6b7bbe04225ea673f9e10bbea8082 samba4-test-4.0.0-60.el6_5.rc4.x86_64.rpm a52343e54e7a56488c4e6fe715c9dd7a3638b481609257793b8ed7b91e511171 samba4-winbind-4.0.0-60.el6_5.rc4.x86_64.rpm e6327693991d6e61ee8dd3615d094075bd130e3739bd2e1cda95d6114f42bab2 samba4-winbind-clients-4.0.0-60.el6_5.rc4.x86_64.rpm 2269006b7c4c24934acefc02051c94b6df714d65d2cac081439733bbe7f46408 samba4-winbind-krb5-locator-4.0.0-60.el6_5.rc4.x86_64.rpm Source: 0bbc8c2b460a09aded0b5ef5d544114d3e9ed5234528a9739e616bb60423096d samba4-4.0.0-60.el6_5.rc4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Tue, 10 Dec 2013 01:03:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1806 Important CentOS 6 samba Update To: centos-announce(a)centos.org Message-ID: <20131210010324.GA45264(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1806 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1806.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 87ec89961597a407e567c6bf4eea0d802b37fab2e0907782d0d7eb409f949a04 libsmbclient-3.6.9-167.el6_5.i686.rpm d96c6e99a0d0e3a6c70e449ee9048c6ad81895abab9bdff21b6c69979b3c3d72 libsmbclient-devel-3.6.9-167.el6_5.i686.rpm 1ce7f15a4d21646c4ba7e6270c0598221b1493eb39c0d4b09a1b77fc370dc06d samba-3.6.9-167.el6_5.i686.rpm e86a06e25d2ae12abd672a3f5482a5484a7dea5a639f2f48b006a3b2882457dd samba-client-3.6.9-167.el6_5.i686.rpm 5cd93d800773c3f46132a8cde115a2864149d1257946da22201f1ab7c8a9696c samba-common-3.6.9-167.el6_5.i686.rpm 8799c0807e6e487d5eba70093b1f8eb31c68ad772f5141e982d3be9e86243d58 samba-doc-3.6.9-167.el6_5.i686.rpm 46a6365b1e48be1c18445e2eaf501813784474ac400a3c907ccabe2facd74797 samba-domainjoin-gui-3.6.9-167.el6_5.i686.rpm 30fc0e3f48046020c4ed90f35a69dfe49467634b78c4b547050bbd3cb451a10c samba-swat-3.6.9-167.el6_5.i686.rpm 8b3dd9dc6bb0adda62e94c0545bcb65ac2198920562c7c79439c79db6c03c0ba samba-winbind-3.6.9-167.el6_5.i686.rpm 813516ef0c4e9c6cec5eec858a573c0438cf21ef4e8a196b25a639919d6cab82 samba-winbind-clients-3.6.9-167.el6_5.i686.rpm c94dad05dd34caa47036d6f078c1ac73bd3b1367b76b1a1c5eda47429b47ba49 samba-winbind-devel-3.6.9-167.el6_5.i686.rpm 638f23141dafc0c453d0561e7d5520c450326d5f5752de7cd7482f237f4651ea samba-winbind-krb5-locator-3.6.9-167.el6_5.i686.rpm x86_64: 87ec89961597a407e567c6bf4eea0d802b37fab2e0907782d0d7eb409f949a04 libsmbclient-3.6.9-167.el6_5.i686.rpm 5ab3232abddde253abda54410df287d56ae5934a8e69ed5eca696e3a9e792d44 libsmbclient-3.6.9-167.el6_5.x86_64.rpm d96c6e99a0d0e3a6c70e449ee9048c6ad81895abab9bdff21b6c69979b3c3d72 libsmbclient-devel-3.6.9-167.el6_5.i686.rpm 9ce8723bf4e5f66482e0106f9b9d742947b3c023520195c5a6f0341732fb5540 libsmbclient-devel-3.6.9-167.el6_5.x86_64.rpm 3d6ddb23b71719fef7b438ded9c57c0f12674315b9ce526d2f4f38ddd1d721e6 samba-3.6.9-167.el6_5.x86_64.rpm 9f6cc1bf5736af8dfa68dfbf3bfffdf3fdf9326572d5da7c63dd596461eeba96 samba-client-3.6.9-167.el6_5.x86_64.rpm 5cd93d800773c3f46132a8cde115a2864149d1257946da22201f1ab7c8a9696c samba-common-3.6.9-167.el6_5.i686.rpm 40b7fdcb87be773c446e716399dfab3ee95e66ca4fe19989962d2a3cb3f7d703 samba-common-3.6.9-167.el6_5.x86_64.rpm 5538c135674af6ff9eee93870cdd6e4118d050a292a11b5518a0ad9d62763a63 samba-doc-3.6.9-167.el6_5.x86_64.rpm da175835f4d0ef900bc4a3bfe1739c1ff15950092e135262e916aacc8009a832 samba-domainjoin-gui-3.6.9-167.el6_5.x86_64.rpm 4230fdae7430e22d4a93d463803d72ce41c254c5ef7cb9ded3885ce2352f6630 samba-swat-3.6.9-167.el6_5.x86_64.rpm 98f2dccef88f890932d4d7d1fc2d6d8320b496b023d6e1c6dae00500e9980f5b samba-winbind-3.6.9-167.el6_5.x86_64.rpm 813516ef0c4e9c6cec5eec858a573c0438cf21ef4e8a196b25a639919d6cab82 samba-winbind-clients-3.6.9-167.el6_5.i686.rpm 3626b0e046f37b9ca9631d074fbd7bafe1485e29a145ee2a18a6d6f52107a22f samba-winbind-clients-3.6.9-167.el6_5.x86_64.rpm c94dad05dd34caa47036d6f078c1ac73bd3b1367b76b1a1c5eda47429b47ba49 samba-winbind-devel-3.6.9-167.el6_5.i686.rpm 851057b71293518dda0013c517d05c0a102c847f6471e13cd79118b00648d9fb samba-winbind-devel-3.6.9-167.el6_5.x86_64.rpm bc6751c8fd056683383d71a69307b572609c164eea826e3c6c2c4f0578154528 samba-winbind-krb5-locator-3.6.9-167.el6_5.x86_64.rpm Source: f301cedc66afad3e91464acb4417393268b6d7ac2c5c3af0dd4acad6f426aff6 samba-3.6.9-167.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Tue, 10 Dec 2013 01:08:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1806 Important CentOS 5 samba3x Update To: centos-announce(a)centos.org Message-ID: <20131210010816.GA32507(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1806 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1806.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fee1979d1be762036817000e5fd22ad897c4e561c5151c292faeb86d8889647d samba3x-3.6.6-0.138.el5_10.i386.rpm 8715caa016111d72e4478c02b1b42e5fc3b4556346031b89a462cf45dfc7cdf0 samba3x-client-3.6.6-0.138.el5_10.i386.rpm c06622cffcd19041d39992024a1503e4dec530bb0dd5c3d033e9ab397951536e samba3x-common-3.6.6-0.138.el5_10.i386.rpm 7f7d5538b662d3babd84a1d66b8bdcfcf55ff276378c611815435ff0ef2d6a40 samba3x-doc-3.6.6-0.138.el5_10.i386.rpm 332fff38bb67744674ce4635d351cbe21193027d0f7d5f720a23ba0e07c7be9c samba3x-domainjoin-gui-3.6.6-0.138.el5_10.i386.rpm dff70ca84f91ed5e4de4041dce1886ef36382563e8fd7229c119ed4b4d4b9fa8 samba3x-swat-3.6.6-0.138.el5_10.i386.rpm 48daa5025e750af2414d909bcdef1b262ffb90436e4f26c87523b34de44ed7c5 samba3x-winbind-3.6.6-0.138.el5_10.i386.rpm 60033851315ade0ad7cde5f676730d4d207f1afd2a2ed75ced9fd4d7a1ef5812 samba3x-winbind-devel-3.6.6-0.138.el5_10.i386.rpm x86_64: 8df068d4cd5cdd85db2d531e486bf2bf46dc6a9b2ffb00ee5dc8a80019d6765d samba3x-3.6.6-0.138.el5_10.x86_64.rpm 6ec8fa94a8d8585a26e77e563250ac1d2e1b0909d29cc4fc2574cbcf66d2a4c8 samba3x-client-3.6.6-0.138.el5_10.x86_64.rpm f8b8d6b31e6fa0ac2ef57fb6d4e388fd4a81ec23cbcc1fb1cb770488cbdffd04 samba3x-common-3.6.6-0.138.el5_10.x86_64.rpm 76b195d92d7c4dbbb684afbb6a451e0677e44a790f745dfd00a410b37baf7c55 samba3x-doc-3.6.6-0.138.el5_10.x86_64.rpm 999d4435b8054df6cd17d3f2fece56a82068c3e5a20f2e08d984b935f3a796af samba3x-domainjoin-gui-3.6.6-0.138.el5_10.x86_64.rpm 5e5f398307bdf6f972744ebd2cf9e594431554f83798b2e68ea0346871bdc850 samba3x-swat-3.6.6-0.138.el5_10.x86_64.rpm 48daa5025e750af2414d909bcdef1b262ffb90436e4f26c87523b34de44ed7c5 samba3x-winbind-3.6.6-0.138.el5_10.i386.rpm 26645e438654535bacf421ca7816daf0e58a8d14b2a7843c9d12458e10bc6d2d samba3x-winbind-3.6.6-0.138.el5_10.x86_64.rpm 60033851315ade0ad7cde5f676730d4d207f1afd2a2ed75ced9fd4d7a1ef5812 samba3x-winbind-devel-3.6.6-0.138.el5_10.i386.rpm a61bf00c94a5ded1cc0c55fd367cb16f60980c9c4376761edb08bc0f5c4f5708 samba3x-winbind-devel-3.6.6-0.138.el5_10.x86_64.rpm Source: ca4f895c01f216ad4e50d04e28f0510586ed67f0a8a966266e611e134ca34ca5 samba3x-3.6.6-0.138.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 5 ***********************************************

1 0

md5sum mismatch between CentOS 6.4 and 6.5 repository
by Ralf Aumüller 10 Dec '13

10 Dec '13

Hello, when I download python-slip-dbus-0.2.20-1.el6_2.noarch.rpm from CentOS 6.5 repository the md5sum is different than when I download same file from 6.4. wget http://msync.centos.org/centos-6/6.5/os/x86_64/Packages/ python-slip-dbus-0.2.20-1.el6_2.noarch.rpm -O python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.65 wget http://msync.centos.org/centos-6/6.4/os/x86_64/Packages/ python-slip-dbus-0.2.20-1.el6_2.noarch.rpm -O python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.64 ls -l ..... 30844 Mar 26 2012 python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.64 ..... 30844 Mar 26 2012 python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.65 md5sum python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.* 20bb02e6f3b7b71e09dcaff7f3b0ca02 python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.64 d37fe4404a7a5fdb27b29f9b5ed09c73 python-slip-dbus-0.2.20-1.el6_2.noarch.rpm.65 Any comments? Background: We have a local CentOS mirror and after updating to 6.5 the kickstart installation fails because of the wrong md5sum of python-slip-dbus. We mirror with rsync (no -c) and so we had the version from 6.4 in our 6.5 repository. (Same seams to be true for python-paste-script-1.7.3-5.el6_3.noarch.rpm and slf4j-javadoc-1.5.8-8.el6.noarch.rpm) Best regards, Ralf

4 7

compat-openmpi issues after upgrade to CentOS 6.5
by Tor Halsan 09 Dec '13

09 Dec '13

Just wondering if anyone can shed some light into an issue we are having with compat-openmpi after upgrading CentOS to version 6.5 Some of our cluster applications are dependent on an older version of OpenMPI, so we are using compat-openmpi. Up to CentOS 6.4 this was version 1.4.3: % /usr/lib64/compat-openmpi/bin/mpirun -V mpirun (Open MPI) 1.4.3 but after the upgrade to CentOS 6.5 it suddenly reports version 1.5.3: % /usr/lib64/compat-openmpi/bin/mpirun -V mpirun (Open MPI) 1.5.3 But rpm/yum still reports that version 1.4.3 is installed: % rpm -qv compat-openmpi compat-openmpi-1.4.3-1.1.el6.x86_64 Is this deliberate, or has someone erred? - Tor

3 4

making a script into a service
by Larry Martell 09 Dec '13

09 Dec '13

We have a python script that is currently run from cron. We want to make it into a service so it can be controlled with service start/stop/restart. Can anyone point me at site that has instructions on how to do this? I've googled but haven't found anything.

6 9

Build environment for totem-2.16.7-7.el5_6.1.src.rpm
by Michael Lampe 09 Dec '13

09 Dec '13

This package has a build requirement 'gecko-devel' which is fulfilled by 'xulrunner-devel'. But in the process of building the browser plugins two tools named 'xpidl' and 'xpt_link' are necessary. They werde once part of 'gecko-devel' but are now replaced by other tools. I haven't found any package that has these tools all the way back to 5.0. Maybe the makers of CentOS can give a hint. After all this package was build for C5. Thanks Michael

2 1

how to inject a kmod driver from elrepo into kickstart
by psavoie1783 07 Dec '13

07 Dec '13

Hi All, I have a marvel chipset for my wired laptop connection. It uses the kmod-sk98lin-10.93.3.3-1.el6.elrepo.x86_64.rpm driver at elrepo. I would like to use this driver to activate the wired connection to kickstart my laptop as I have pxe booting set upon my home network. Could anyone please enlighten me as to how to get the drivers/firmware from this package loaded on my laqptop so I can use kickstart to load the OS, please? Thank you for your time, Phil -- To err, is human To never grow up, is divine _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

3 6

DMAR Problem since 6.5
by Sebastian Marten 07 Dec '13

07 Dec '13

Hello List, I updated my server to CentOS 6.5. When i boot the system with the new kernel: 2.6.32-431.el6.x86_64 I get repeating the following message: dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Read] Request device [00:02.0] fault addr 1fc00000 DMAR:[fault reason 06] PTE Read access is not set I use a Intel Core i5-3550 CPU with vt-d enabled to use a DVB-S Card inside a Windows VM (kvm). With the old 6.4 Kernel all works (2.6.32-358.23.2.el6.x86_64) lscpi shows this: [...] 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) [...] Is this a problem with the intel driver or anything else? Regards, Sebastian Marten

1 0

packet traversal
by Robert Clove 06 Dec '13

06 Dec '13

Hi All I don't know whether i am asking on a correct list or not i have a query that how to know that what system call are called when packet enters the system or when we send a packet from a system? Thanks

5 9

Dragging app between workspaces not working
by Wes James 06 Dec '13

06 Dec '13

When I try to drag an app between workspaces, it doesn't move. I'm using compiz. When I put an arrow over an app in the workspace panel viewer (whatever that is called), it says click to start dragging, but no go. Any ideas? Thanks, -wes

4 9

Re: [CentOS] ZFS on Linux testing effort
by Chuck Munro 06 Dec '13

06 Dec '13

On 04.12.2013 14:05, nux(a)li.nux.ro wrote: >>> >>On 04.12.2013 14:05, John Doe wrote: >>>>> >>>>From: Lists<lists(a)benjamindsmith.com> >>>>> >>>> >>>>>>> >>>>>>Our next big test is to try out ZFS filesystem send/receive in >>>>>>> >>>>>>lieu >>>>>>> >>>>>>of >>>>>>> >>>>>>our current backup processes based on rsync. Rsync is a fabulous >>>>>>> >>>>>>tool, >>>>>>> >>>>>>but is beginning to show performance/scalability issues dealing >>>>>>> >>>>>>with >>>>>>> >>>>>>the >>>>>>> >>>>>>many millions of files being backed up, and we're hoping that ZFS >>>>>>> >>>>>>filesystem replication solves this. >>>>> >>>> >>>>> >>>>Not sure if I already mentioned it but maybe have a look at: >>>>> >>>>?http://code.google.com/p/lsyncd/ >>> >>I'm not so sure inotify works well with millions of files, not to >>> >>mention it uses rsync. :D >>> >> >>> >>-- Sent from the Delta quadrant using Borg technology! Nux! >> > >> >I can attest to the usefulness of 'lsyncd' for large numbers of files >> >(our file server has almost 2 million in active use, with a second >> >backup server that's lsync'd to the first. >> > >> >Things to note: >> >- Yes, lsyncd does use rsync, but it issues an 'exclude *' followed by >> >the list of only the file(s) that need updating at that moment. >> > >> >- The inotify service can be jacked waaaay up (three kernel >> >parameters) >> >to handle millions of files if you wish. Just make sure you have lots >> >of RAM. > Be careful with it. Sadly I found out that inotify would consistently > fail on InnoDB files (ibd); I had to use stupid while loops and check > mtimes to perform some stuff that inotify-cron would've done much more > elegantly ... > > -- Sent from the Delta quadrant using Borg technology! Nux! Interesting point, something I didn't know. Fortunately in my case there are no db files involved directly, just db dumps wrapped in a tarball along with other associated stuff, sent from other servers. I would expect that lsync'ing db files could be a nasty non-stop process if the database is constantly being updated, so using db tools for replication would be best, configuring inotify/lsyncd to ignore the db directories. I believe by default that lsyncd instructs rsync to do whole-file transfers, so a large db could be a real problem. Thanks for the important heads-up!

1 0

Third-party SATA-RAID cards suggestions
by Sorin Srbu 06 Dec '13

06 Dec '13

Hi all, Would anybody care to suggest a third party SATA-RAID card that works out of the box with CentOS 6, without having to jump through hoops to make it work? The card should preferably be able to connect ten harddrives, but I guess three four-port cards should work as well. There's no need for anything fancy really, as long as I can create a single big software-raid on it at CentOS install-time. So far I've tried a Highpoint RocketRAID 2740 and a LSI 9201-16i without too much success. Thanks for any suggestions in advance! -- BW, Sorin ----------------------------------------------------------- # Sorin Srbu, Sysadmin # Uppsala University # Dept of Medicinal Chemistry # Div of Org Pharm Chem # Box 574 # SE-75123 Uppsala # Sweden# # Phone: +46 (0)18-4714482 # Visit: BMC, Husargatan 3, D5:512b # Web: http://www.orgfarm.uu.se ----------------------------------------------------------- # () ASCII ribbon campaign - Against html E-mail # /\ # # This message was not sent from an iProduct! # # MotD follows: # Legacy MS Tag: The best way to accelerate Windows is at escape velocity.

5 14

To discard... or not to discard...
by John Doe 06 Dec '13

06 Dec '13

Hi, I just recently read a post about SSD triming (discard vs fstrim): http://www.howtogeek.com/176978/ubuntu-doesnt-trim-ssds-by-default-why-not-… far I used discard on all my SSDs. Now I am wondering if it is really worth it to switch them all to a crontabed fstrim... Anyone made the switch yet? Thx, JD

6 8

ADMIN issue - manitu
by m.roth＠5-cent.us 06 Dec '13

06 Dec '13

I've been blocked twice this morning, and removed myself once - the first time, by the time I got to work and looked at the list, it was already gone. My hosting provider works with those jerks at manitu. I've ranted a number of times over the years at why their method is a *lousy* method for blocking spam in the second decade of the 21st century. Now this: here's another argument as to why the CentOS list should stop using them... when I went to remove myself, the email that told me I'd been blocked, also said who'd reported my mailserver (that is, hostmonster's mailserver) as sending spam was someone at selfip.biz. Go do a whois on them - it's someone at home, using dyndns, not an open obvious company. This means that anyone who gets annoyed at *anyone* served by any ISP can report them, and block everyone at that ISP. Go ahead, tell me this is *reasonable* in 2013. mark

6 26

Re: [CentOS] Fwd: 64bit centos and wine
by Igor Littig 06 Dec '13

06 Dec '13

Thanks, I was able to upgrade yum by deleting some mirrors which I didn't need slready. But I still cannot install wine. When I'm running configure script I'm getting "checking whether gcc -m32 works... no configure: error: Cannot build a 32-bit program, you need to install 32-bit development libraries." However, I've got "libstdc++-4.4.7-4.el6.i686" installed. Maybe "configure" search the lbraries in a wrong place ? 2013/12/6 Reindl Harald <h.reindl(a)thelounge.net> > other mirrors, some outdated, some not > currently CentOS 6.5 is reaching the users > > try downgrade the x86_64 version temporary > or "rm -rf /var/cache/yum/*" to hopefully > catch a different mirror > > i have not seen gnutls-2.8.5-15.el6.x86_64 here > by myself - so this is interesting, maybe this > one is very recently packaged > > Am 06.12.2013 10:12, schrieb Igor Littig: > > ---------- Forwarded message ---------- > > From: Igor Littig <igor.littig(a)gmail.com> > > Date: 2013/12/6 > > Subject: Re: [CentOS] 64bit centos and wine > > To: Reindl Harald <h.reindl(a)thelounge.net> > > > > > > I've been trying to do "yum upgrade" right now, but I'm getting the same > > multilib error with "gnutls" package and it stops > > "gnutls-2.8.5-15.el6.x86_64 != gnutls-2.8.5-10.el6_4.2.i686". > > > > 2013/12/6 Reindl Harald <h.reindl(a)thelounge.net> > > > >> Am 06.12.2013 08:10, schrieb Igor Littig: > >>> Thanks for the response, but the link did not help. When I try to > install > >>> wine it says > >>> > >>> "configure: error: Cannot build a 32-bit program, you need to install > >>> 32-bit development libraries." > >>> > >>> But when I'm installing " libstdc++.i686" I'm getting the error > >>> > >>> "Protected multilib versions: libstdc++-4.4.7-4.el6.i686 != > >>> libstdc++-4.4.7-3.el6.x86_64" > >>> > >>> Does anybody have ideas how can I work around this problem ? > >> > >> what about doing "yum upgrade" before? > >> your installed x86_64 package is simply outdated and multilib must match > >> > >> libstdc++-4.4.7-4.el6.i686 > >> libstdc++-4.4.7-3.el6.x86_64 > >> > >> mine: Nov 27 10:55:38 Updated: libstdc++-4.4.7-4.el6.x86_64 > >

4 6

64bit centos and wine
by Igor Littig 06 Dec '13

06 Dec '13

Hello everyone. Has anybody ever tried to install 32bit wine to 64bit centos. I was able to run 64 bit wine, but some of mine application require 32 bit wine, but I cannot install it. It says to install 32bit development libraries at first. Does it make sense, what I'm doing ? I will be really appreciated any help. Cheers Igor

4 4

Re: [CentOS] Third-party SATA-RAID cards suggestions
by m.roth＠5-cent.us 06 Dec '13

06 Dec '13

Keith Keller wrote: > On 2013-12-05, Sorin Srbu <Sorin.Srbu(a)orgfarm.uu.se> wrote: >> Would anybody care to suggest a third party SATA-RAID card that works out of the box with CentOS 6, without having to jump through hoops to make it >> work? >> >> The card should preferably be able to connect ten harddrives, but I guess three four-port cards should work as well. There's no need for anything >> fancy really, as long as I can create a single big software-raid on it at CentOS install-time. > > There's little reason to do that if you have a real hardware RAID card. (I won't say "no reason", but it would have to be extremely compelling for it to be wise to go that route.) > >> So far I've tried a Highpoint RocketRAID 2740 and a LSI 9201-16i without too much success. > > The MegaRAID 9271 works OOTB with CentOS 6.4. Every 3ware card (also from LSI) I've used also works OOTB with CentOS. If you are new to hardware RAID, the 3ware interface is a lot easier to learn than the MegaRAID's. (I suspect that other LSI cards, including the 9201, work fine with CentOS too; perhaps you can post your error messages so we can see what's wrong, instead of replacing a working controller.) I tried to respond to this earlier, but *%@#$%^& manitou blocked me again. I wouldn't recommend the RocketRaid. We have a few of them here; they work ok, but Highpoint, who makes them, are *not* really great about updating drivers once the card's out their door. The last one we put back into service, I had to find the last source code they had for that card, several years old, and then fix the code before I could compile it. (At least it was in C). Second on MegaRAID. The ones we have here are the Dell rebranded PERCs, and we've never had trouble, except with ones nearly 10 years old. mark

3 3

Fwd: 64bit centos and wine
by Igor Littig 06 Dec '13

06 Dec '13

---------- Forwarded message ---------- From: Igor Littig <igor.littig(a)gmail.com> Date: 2013/12/6 Subject: Re: [CentOS] 64bit centos and wine To: Reindl Harald <h.reindl(a)thelounge.net> I've been trying to do "yum upgrade" right now, but I'm getting the same multilib error with "gnutls" package and it stops "gnutls-2.8.5-15.el6.x86_64 != gnutls-2.8.5-10.el6_4.2.i686". 2013/12/6 Reindl Harald <h.reindl(a)thelounge.net> > Am 06.12.2013 08:10, schrieb Igor Littig: > > Thanks for the response, but the link did not help. When I try to install > > wine it says > > > > "configure: error: Cannot build a 32-bit program, you need to install > > 32-bit development libraries." > > > > But when I'm installing " libstdc++.i686" I'm getting the error > > > > "Protected multilib versions: libstdc++-4.4.7-4.el6.i686 != > > libstdc++-4.4.7-3.el6.x86_64" > > > > Does anybody have ideas how can I work around this problem ? > > what about doing "yum upgrade" before? > your installed x86_64 package is simply outdated and multilib must match > > libstdc++-4.4.7-4.el6.i686 > libstdc++-4.4.7-3.el6.x86_64 > > mine: Nov 27 10:55:38 Updated: libstdc++-4.4.7-4.el6.x86_64 > >

1 0

libgtkhtml-editor
by Fred Smith 06 Dec '13

06 Dec '13

Guys/Gals: On 64bit 6.5, I've had to "yum remove" the Xiphos package because it was causing errors in "yum update", complaints about it requiring libgtkhtml-editor. I've had Xiphos installed since I installed 6.x almost a year ago, and it has worked fine for me. recently yum is complaining about this issue, and I can't figure it out. there doesn't appear to even BE a libgtkhtml-editor package anywhere, including on epel, which is the purveyor of the xiphos package: # yum whatprovides */libgtkhtml-editor Loaded plugins: fastestmirror, priorities, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: mirrors.advancedhosters.com * elrepo: elrepo.org * epel: mirrors.mit.edu * extras: mirror.steadfast.net * rpmfusion-free-updates: mirror.nexcess.net * rpmfusion-nonfree-updates: mirror.nexcess.net * updates: mirror.cisp.com 87 packages excluded due to repository priority protections No Matches found Clues appreciated. (I'll also be posting this on the Xiphos user list, as someone there may know what's going on.) -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

2 4

SOHO colour laser printer recommendations
by Ned Slider 06 Dec '13

06 Dec '13

Hi List, I'd really appreciate some recommendations for colour laser printers for use with CentOS. It's for light home use with CentOS 5 and CentOS 6 systems. Must have: 1. Colour. Quality not that important as mainly for kids school project type of stuff. 2. Ethernet connectivity - want something I can plug into the network 3. Cheap running costs - don't want to be spending a fortune on toner 4. Linux support I have very little experience with printing on Linux. I'm assuming I want a laser with Postscript and/or PCL emulation, and Linux driver support (still not sure exactly what I should be looking for here). Top of my very short list at present is: Brother HL-4140CN at £167 http://www.amazon.co.uk/Brother-HL4140CN-Network-Colour-Printer/dp/B0047753… I'd appreciate any other recommendations people might have. Thanks!

8 11

compiz workspace panel show 4 workspaces when I have 8
by Wes James 06 Dec '13

06 Dec '13

Compiz is showing only 4 workspaces when I log in. If I go in to the compiz settings manager -> general -> general options -> desktop size it says 8 in Horizontal Virtual size. I can get it to work right if I move Vertical Virtual size to the right then back to 1. How do I get it to stay showing 8? Thanks, -wes

1 0

Found duplicate PV
by Markus Falb 05 Dec '13

05 Dec '13

Hey, (sorry for cross-posting, you will find this message also in centos-virt, maybe, but this was not intended and a mistake) I have a system with a mdraid 1 ... md1 : active raid1 sdb2[1] sda2[0] 1465031488 blocks [2/2] [UU] ... this raid partition has a lvm physical volume with one volume group and several logical volumes. This machine is running since years and I seldom touch the lvm config. The lvm commands are giving me strange warnings I am uncomfortable with ... # pvdisplay Found duplicate PV b79x0kLXR9mAC0z0IZUxyJG1VC24Crl7: using /dev/sda2 not /dev/md1 --- Physical volume --- PV Name /dev/sda2 VG Name vg_sys PV Size 1.36 TB / not usable 6.81 MB Allocatable yes PE Size (KByte) 32768 Total PE 44709 Free PE 17701 Allocated PE 27008 PV UUID b79x0k-LXR9-mAC0-z0IZ-UxyJ-G1VC-24Crl7 ... What does this "Found duplicate PV b79x0kLXR9mAC0z0IZUxyJG1VC24Crl7: using /dev/sda2 not /dev/md1" message? Some logical volumes are virtual disks vor kvm guests. Are these guests using sda only and not the mdraid? -- Markus

4 8

Re: [CentOS] ZFS on Linux testing effort
by Chuck Munro 05 Dec '13

05 Dec '13

> On 04.12.2013 14:05, John Doe wrote: >> >From: Lists<lists(a)benjamindsmith.com> >> > >>> >>Our next big test is to try out ZFS filesystem send/receive in lieu >>> >>of >>> >>our current backup processes based on rsync. Rsync is a fabulous >>> >>tool, >>> >>but is beginning to show performance/scalability issues dealing with >>> >>the >>> >>many millions of files being backed up, and we're hoping that ZFS >>> >>filesystem replication solves this. >> > >> >Not sure if I already mentioned it but maybe have a look at: >> >?http://code.google.com/p/lsyncd/ > I'm not so sure inotify works well with millions of files, not to > mention it uses rsync. :D > > -- Sent from the Delta quadrant using Borg technology! Nux! I can attest to the usefulness of 'lsyncd' for large numbers of files (our file server has almost 2 million in active use, with a second backup server that's lsync'd to the first. Things to note: - Yes, lsyncd does use rsync, but it issues an 'exclude *' followed by the list of only the file(s) that need updating at that moment. - The inotify service can be jacked waaaay up (three kernel parameters) to handle millions of files if you wish. Just make sure you have lots of RAM. It's wise to tune ZFS to *not* use all available RAM. - Updating is very quick and has never failed. Regarding ZFS, our two ZFS-on-Linux servers have been in full production for several months, with zero problems so far. Updates to the latest version is quite painless. Today I had to replace a failed 4TB drive ... it took just a few minutes and required only two commands to do the replacement and start the resilvering process. This was done while the server was in active use, with only a small performance hit. Sweet! Chuck

2 1

yum update interruption recovery
by Hugh E Cruickshank 05 Dec '13

05 Dec '13

Hi All: I am having problems with a CentOS 6.4 box that I was in the process of doing a yum update to 6.5. Unfortunately the system hung during the update and I was forced to reboot it and it is now a bit of a mess. Can someone point me in the direction of any documentation that would assist in the recovering from this. TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

5 8

Issue mounting /home area from NAS server
by Pat Haley 05 Dec '13

05 Dec '13

Hi, Just before the Thanksgiving break, we enabled quotas on the /home areas on the mseas-data server (running CentOS 5.8), using the following line in the updated /etc/fstab /dev/mapper/the_raid-lv_home /home ext3 defaults,usrquota,grpquota 1 0 Following the Thanksgiving reboot of mseas-data we have been experiencing problems with svn on mseas (our front-end machine, running CentOS 6.2). After consulting with the svn mailing list, it appeared to be a communication issue between mseas and mseas-data. We therefore rebooted mseas. Now mseas is not mounting /home. We get the following error [root@mseas etc]# mount mseas-data:/home mount.nfs: Unknown error 521 We have tried this mounting with both of the following lines in fstab and got the same error mseas-data:/home /home nfs defaults 0 0 mseas-data:/home /home nfs defaults,usrquota,grpquota 0 0 (the latter was to mimic the mounting of /home on mseas-data) The only thing we've found out on the web so far was advice on editting /etc/exports to have an "insecure" option for the export of /home, which we already had. Any thoughts on how to resolve or debug this issue would be greatly appreciated. Thank you. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Pat Haley Email: phaley(a)mit.edu Center for Ocean Engineering Phone: (617) 253-6824 Dept. of Mechanical Engineering Fax: (617) 253-8125 MIT, Room 5-213 http://web.mit.edu/phaley/www/ 77 Massachusetts Avenue Cambridge, MA 02139-4301

4 7

No Trackpad tab in Mouse Preferences
by Wes James 05 Dec '13

05 Dec '13

I have CentOS 6.5 running on a iMac. I tried to set up a trackpad, but the Bluetooth utility said there was no bluetooth hardware. I rebooted in to the OS X side and verified that bluetooth was in the system and set up the trackpad. I then rebooted in to CentOS again and there was no Bluetooth icon in the panel for setting up BlueTooth devices, but I pressed the trackpad and it started working. I then looked in to enabled tap (instead of a hard press), but there is no Trackpad tab in the Mouse Preferences pane. How do I get the Trackpad tab? I did rpm -qa|grep synaptics and it show I have xorg-x11-drv-synaptics-1.6.2-13.el6.x86_64 installed. How do I get the Trackpad tab? Thanks, -wes

1 0

CentOS-announce Digest, Vol 106, Issue 3
by centos-announce-request＠centos.org 05 Dec '13

05 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1780 CentOS 6 resource-agents Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 4 Dec 2013 15:24:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1780 CentOS 6 resource-agents Update To: centos-announce(a)centos.org Message-ID: <20131204152447.GA9113(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1780 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1780.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4e02495f9315b0d1ca3c63cfeb05c115ea8ed32bbd48587bed47d18046b03cce resource-agents-3.9.2-40.el6_5.4.i686.rpm 0bbf4a5bf9b18575bc261bdb2ae9e41cf99bbbc7d2cc0ae7e6a689b5dc92aa7f resource-agents-sap-3.9.2-40.el6_5.4.i686.rpm x86_64: 30bc77ae1f381ccf2961a7175fc913708b1d49e65c31a3a6391490e90910a909 resource-agents-3.9.2-40.el6_5.4.x86_64.rpm 94239eac9f26614c7f16d73b2f994f47451068325bec6214977893c09ce4b768 resource-agents-sap-3.9.2-40.el6_5.4.x86_64.rpm Source: 01601f8a3318feef0f649171a328258c7efe3cd4288ead021be7d2d1c789ec7e resource-agents-3.9.2-40.el6_5.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 3 ***********************************************

1 0

lastlog oddity
by m.roth＠5-cent.us 04 Dec '13

04 Dec '13

This is very odd. I updated a user's workstation yesterday. This morning, I ran lastlog | grep -v Never, and it shows only another admin and myself, and that's from days ago, but not the user. It shows her as "Never logged in". Meanwhile, last does indeed show her logged in (though not today). Anyone have any ideas? mark

2 2

Outbound traffic spike every 30 minutes
by Bowie Bailey 04 Dec '13

04 Dec '13

Since Sunday morning, one of my CentOS servers has been generating a small spike of outbound traffic every 30 minutes (X:00 and X:30). It's not enough traffic to really cause any notice except for the fact that it is a very regular pattern and it started abruptly at midnight Sunday. This server is used for mail (Courier-MTA), and DNS (Bind). I cannot find anything unusual in either of those logs. I tried grepping through my firewall logs, but have been unable to find anything useful there either. I don't see any cron jobs that would generate network traffic. Any suggestions how I can go about tracking this down? -- Bowie

4 6

driver disk in kickstart...
by John Doe 04 Dec '13

04 Dec '13

Hi, I need to add a driver in my usb install key kickstart to handle some crap hp fake raid. The thing is the "driverdisk" option offers "partition" or some network options. I would like to put everything on the key, so no network. Does "partition" mean it is restricted to the "/" of it? Does it mean that either I have to extract the .img file in the "/" of my usb key (a bit messy), or that I need to create another partition just for it? Thx, JD

1 0

Query on make
by Rajagopal Swaminathan 04 Dec '13

04 Dec '13

Greetings, I have created several scripts which needs to be packaged. I have done my groundwork on rpmbuild Let us say I have 4 directories with scripts in them dir1, dir2, dir3 and dir4 I want to create different packages which will contain the compiled code (err.. shc) pack1: dir1,dir2 pack2: dir1,dir3 pack3: dir1,dir3 I want the resulting rpm packages will be residing elsewhere (perhaps BUILDROOT). Now I am aware of using different specfiles But When and how do I compile the packages? Using makefiles? Can it produce different variants? I am a bit confused as to the workflow. the sources cannot be part of eithr the srpm or the deliverable rpms. Please note that this project will be maintained by someone else with unknown familiarity. Any suggestions, pointers, help etc. please? Thanks in advance -- Regards, Rajagopal

2 1

CentOS-announce Digest, Vol 106, Issue 2
by centos-announce-request＠centos.org 04 Dec '13

04 Dec '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1779 Moderate CentOS 6 mod_nss Update (Johnny Hughes) 2. CESA-2013:1778 Moderate CentOS 6 gimp Update (Johnny Hughes) 3. CEBA-2013:1746 CentOS 6 resource-agents Update (Johnny Hughes) 4. CEBA-2013:1750 CentOS 6 qemu-kvm Update (Johnny Hughes) 5. CEBA-2013:1751 CentOS 6 openssl Update (Johnny Hughes) 6. CEBA-2013:1749 CentOS 6 virt-v2v Update (Johnny Hughes) 7. CESA-2013:1779 Moderate CentOS 5 mod_nss Update (Johnny Hughes) 8. CESA-2013:1778 Moderate CentOS 5 gimp Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Dec 2013 22:51:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1779 Moderate CentOS 6 mod_nss Update To: centos-announce(a)centos.org Message-ID: <20131203225146.GA60117(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1779 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1779.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f4042ad5884a7146e5bc22ebfd27de9937c71f5c1e080ce073e90769caf91c28 mod_nss-1.0.8-19.el6_5.i686.rpm x86_64: 83079558f7cdfbdc33f20541e2a04f4f8d7a383177f1b93187f0798c62b31606 mod_nss-1.0.8-19.el6_5.x86_64.rpm Source: f8134f4fa649e814719c663e0f6a74395ab4661631dd28135c457a58fc52c0e1 mod_nss-1.0.8-19.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 3 Dec 2013 22:52:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1778 Moderate CentOS 6 gimp Update To: centos-announce(a)centos.org Message-ID: <20131203225231.GA60413(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1778 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1778.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 14cd056ef404b052fed0e3caf5af54916c91565ec27f3eaa23631fc1583a5834 gimp-2.6.9-6.el6_5.i686.rpm aba9b26990eeb7152db3a6568c68fa8ce48381a023e241dbc58be826a237994f gimp-devel-2.6.9-6.el6_5.i686.rpm f96205c80c38bf709b1966e55998d5f04d59538deac100e13b6b01e7c45ae8f5 gimp-devel-tools-2.6.9-6.el6_5.i686.rpm 316122512919da96ebb1deef825b863658a05fc9d5f8ffd50d193776faa18717 gimp-help-browser-2.6.9-6.el6_5.i686.rpm fddd481b9652bb85e47d3c01755f5befc247a502b07586dfcc12b9a2ab1d189f gimp-libs-2.6.9-6.el6_5.i686.rpm x86_64: 6d816b1816323f416370d96eba63071f7a4e9ce06d5d3fad67cc33b3bc4cad37 gimp-2.6.9-6.el6_5.x86_64.rpm aba9b26990eeb7152db3a6568c68fa8ce48381a023e241dbc58be826a237994f gimp-devel-2.6.9-6.el6_5.i686.rpm 04c013fd27c956c87a71275026958e6588615c5ad1f232e42ef5af08be01a1ac gimp-devel-2.6.9-6.el6_5.x86_64.rpm b80339a50a8d0c2f404a1ca4650d72349786ba9950439feb20f479fd09c7884b gimp-devel-tools-2.6.9-6.el6_5.x86_64.rpm 5a1d6d831be95f5c092e5ce36a6a8d0de5d8d3a2d82efab904b0be74b6a36892 gimp-help-browser-2.6.9-6.el6_5.x86_64.rpm fddd481b9652bb85e47d3c01755f5befc247a502b07586dfcc12b9a2ab1d189f gimp-libs-2.6.9-6.el6_5.i686.rpm b45150ad448379da1a75389c716e110d3c7e12a6486190ba7d12a8546fd032b2 gimp-libs-2.6.9-6.el6_5.x86_64.rpm Source: 40e7b3a995c3775f3370962f9a297ac5eb37aee6d8729782f237c9528a2b1972 gimp-2.6.9-6.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 3 Dec 2013 22:52:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1746 CentOS 6 resource-agents Update To: centos-announce(a)centos.org Message-ID: <20131203225259.GA60614(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1746 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1746.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 07aa66015af7795d0d877bb23264af217ad0d3a7d9c5fa8c07620d314b60c6e2 resource-agents-3.9.2-40.el6_5.3.i686.rpm a1391f9fcd80d56460a6ba8f1cc20c0c478ae71ef1f7c3398d14d8662f3e729e resource-agents-sap-3.9.2-40.el6_5.3.i686.rpm x86_64: f20dc1a0a8866af458be429e5cdc474fb50e30593dfe47d8520c5387815254b7 resource-agents-3.9.2-40.el6_5.3.x86_64.rpm 89d4c0a99037726a842dc26c9a6b894a8bd254782e2d6e1652a22fceff8d79ef resource-agents-sap-3.9.2-40.el6_5.3.x86_64.rpm Source: 9196e687fb0426290aef2251dc962bf7a05f197e6ec036f8985c73799846304e resource-agents-3.9.2-40.el6_5.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 3 Dec 2013 22:53:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1750 CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20131203225338.GA60832(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1750 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1750.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c772d1f85c6046a9c85e7630ae9cf70b58ad604f30eca9a7473df8505c2212bd qemu-guest-agent-0.12.1.2-2.415.el6_5.3.i686.rpm x86_64: 7a670e5969d446ea0dbed51b1e5ae02d54723413ceec638e53565009da02d7d8 qemu-guest-agent-0.12.1.2-2.415.el6_5.3.x86_64.rpm 55bd90846719e7d1d90689e2d79167b82efcbd1f1923466dd03741831fc49e5f qemu-img-0.12.1.2-2.415.el6_5.3.x86_64.rpm 27c0925c07303dad0e1dbc1e3f1468847461c8ec6785d3dd17c989a79e108acc qemu-kvm-0.12.1.2-2.415.el6_5.3.x86_64.rpm d46d052d5df9718b851b8eb76c4645fd1885bef379363f36a1ae5c6d8169f59f qemu-kvm-tools-0.12.1.2-2.415.el6_5.3.x86_64.rpm Source: 7f08d05d148ab1a7276462965579a0c7365b951c257678a86c97e6128d5f7051 qemu-kvm-0.12.1.2-2.415.el6_5.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 3 Dec 2013 22:54:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1751 CentOS 6 openssl Update To: centos-announce(a)centos.org Message-ID: <20131203225405.GA61097(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1751 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1751.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 84130aca6ddd9a6f49ac4b4522982d3b0fd4aa09e12669cbec3b55a63a1e38ff openssl-1.0.1e-16.el6_5.i686.rpm 6a24c88eb8986f6c7cb76fdb874dd9075b7a1fc781903736da199ff2999468db openssl-devel-1.0.1e-16.el6_5.i686.rpm db69098f1c654087c4e77841e9c7d100947be693f06b48842b2e8feb5d362120 openssl-perl-1.0.1e-16.el6_5.i686.rpm f8255f413e34c16f766a7083880d987aa25d910c0b9bad516f1c95bdd1202ac0 openssl-static-1.0.1e-16.el6_5.i686.rpm x86_64: 84130aca6ddd9a6f49ac4b4522982d3b0fd4aa09e12669cbec3b55a63a1e38ff openssl-1.0.1e-16.el6_5.i686.rpm f731249afe742fb12ddb2ed036eb20fa4fe8a5e90cf2682326875f9015468cef openssl-1.0.1e-16.el6_5.x86_64.rpm 6a24c88eb8986f6c7cb76fdb874dd9075b7a1fc781903736da199ff2999468db openssl-devel-1.0.1e-16.el6_5.i686.rpm c0de07a2839dd5698ee170913e203f80aeecd32ad2da7705f3416faaab2b1632 openssl-devel-1.0.1e-16.el6_5.x86_64.rpm 3269d13c33c8f8a2fbdf19fd18132b101888e3deb1c1ee0683ef6ef7fc7b5d83 openssl-perl-1.0.1e-16.el6_5.x86_64.rpm 210f0277c64dd180cc946e060a1300e6cc829908d6a5c339a8cd67291ee39522 openssl-static-1.0.1e-16.el6_5.x86_64.rpm Source: e384510ab87aaf6a8a5d00a208872ac9c97a4c29dbd7ef34ce332846c2238f0f openssl-1.0.1e-16.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 3 Dec 2013 22:54:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1749 CentOS 6 virt-v2v Update To: centos-announce(a)centos.org Message-ID: <20131203225438.GA61272(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1749 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1749.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: eb6d8ba8ca2367c81a9318e115b00fe4356a4aa3d0ad277b8373c591b0e074fa virt-v2v-0.9.1-5.el6_5.x86_64.rpm Source: 23aa169a793883a5423f21ae3bd004b968c4907c1f4b7d4f1c322d56e2a284c4 virt-v2v-0.9.1-5.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 3 Dec 2013 23:06:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1779 Moderate CentOS 5 mod_nss Update To: centos-announce(a)centos.org Message-ID: <20131203230638.GA27236(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1779 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1779.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6b479a0d065d69b9908d1678bc4baf881358e68902833c0416352a0deb544bb1 mod_nss-1.0.8-8.el5_10.i386.rpm x86_64: ce99075d14f4d1dd01902d23734a5e0f054a695c1aeca734afe29b0899954e0b mod_nss-1.0.8-8.el5_10.x86_64.rpm Source: 846205b78d5356c09367c29ff9bb6c106f22a73287684bf469f06fad6de5998f mod_nss-1.0.8-8.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Tue, 3 Dec 2013 23:07:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1778 Moderate CentOS 5 gimp Update To: centos-announce(a)centos.org Message-ID: <20131203230752.GA27348(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1778 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1778.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 878b8cb33fb0fdb77dbd6a1c3f3d29bc53ce880da5e87ddf14a4c376e4197951 gimp-2.2.13-3.el5_10.i386.rpm cc864abb90e877efa2a71fac0d011e61f2d5f8340a77f914b3c516e386b72023 gimp-devel-2.2.13-3.el5_10.i386.rpm c1949b85b5678516add79c8903b68d8dcd3c337326f131a19fc83756c36b05c7 gimp-libs-2.2.13-3.el5_10.i386.rpm x86_64: 5d725a0161d9ccef88ea1079b49f7c6a97c583211190c07fc8e61a80c78cf422 gimp-2.2.13-3.el5_10.x86_64.rpm cc864abb90e877efa2a71fac0d011e61f2d5f8340a77f914b3c516e386b72023 gimp-devel-2.2.13-3.el5_10.i386.rpm 48c4d79bff57bb63b1076f0e8b9a0269de82f530eee1312319137fdf90472141 gimp-devel-2.2.13-3.el5_10.x86_64.rpm c1949b85b5678516add79c8903b68d8dcd3c337326f131a19fc83756c36b05c7 gimp-libs-2.2.13-3.el5_10.i386.rpm 9f46d3b5ecf363b6b96bc9dd9a94060dee0173d19cb0a43cb818e1deaa8ac6c3 gimp-libs-2.2.13-3.el5_10.x86_64.rpm Source: 53bf4e7aec74b5ebe980c587ab4924e4fba39483a3e990e6b9c803342edc2611 gimp-2.2.13-3.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 106, Issue 2 ***********************************************

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss