- Discuss - lists.centos.org

updates issue
by Fred Smith 22 Sep '13

22 Sep '13

Since doing "yum update" this morning, an update that installed several packages, the updater shows me 3 packages to install: hpijs-1:3.12.4-4.el6_4.1 (x86_64) hplip-common-3.12.4-4.el6_4.1 (x86_64) hplip-libs-3.12.4-4.el6_4.1 (x86_64) but when I attempt to actually run the update I get: hplip-libs-3.12.4-4.el6.i686 requires libsane.so.1 hplip-libs-3.12.4-4.el6.i686 requires hplip-common = 3.12.4-4.el6 : Success - empty transaction this is a 64-bit computer running 6.4 x86_64, and none of these 3 packages as installed is i686 they are all x86_64. So, why would I be getting errors saying that the 32-bit packages have certain requirements that aren't being met? there are no such 32-bit packages on this computer. # yum list installed | grep -y hplip-libs hplip-libs.x86_64 3.12.4-4.el6 @cr -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For him who is able to keep you from falling and to present you before his glorious presence without fault and with great joy--to the only God our Savior be glory, majesty, power and authority, through Jesus Christ our Lord, before all ages, now and forevermore! Amen." ----------------------------- Jude 1:24,25 (niv) -----------------------------

3 7

Re: [CentOS] Dual Boot Windows 8 & CentOS 6.4
by Amit Joshi 21 Sep '13

21 Sep '13

Thanks!! But where is this disable secure boot option exactly? I can't find it anywhere in my BIOS. Regards, adj -----Original Message----- From: "Xinyun Zhou" <me(a)xyzhou.com> Sent: ‎21/‎09/‎2013 14:51 To: "centos(a)centos.org" <centos(a)centos.org> Subject: Re: [CentOS] Dual Boot Windows 8 & CentOS 6.4 On Fri, 2013-09-20 at 17:42 +0300, Amit Joshi wrote: > > I am studying for the RHCSA Exam and wanted to install CentOS 6.4 alongside Windows 8. I got a new laptop with a processor that supports virtualization. > > > > I am planning to remove all the recovery partitions after backing up all drivers etc. on them. Lets see how it works out. > > > > Any caveats I should know about? >From my experience from the RHCSA exam, all you need to do is to use the KVM, which is a pre-installed system. You will use that as your exam client (all your answer will be in the virtual machine). If you really want to boot that, I would suggest you use a external hard drive to boot CentOS, and install virtual machines in it. Be sure to disable Secure Boot. -- Xinyun Zhou _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] reputable sites to download RPMs
by Patrick 21 Sep '13

21 Sep '13

Hi Everyone I would like to use kicad for circuit design. It does not appear to be in the repos. I have built all the other software that I need and not included in the repos from source but I have struggled with kicad. There looks to be lots of places on the net that I can download RPMs not in the repos from but I don't know which ones run honest operations. Could anyone point me to a good site? Thanks for reading my post-Patrick

2 1

Re: [CentOS] Dual Boot Windows 8 & CentOS 6.4
by Amit Joshi 21 Sep '13

21 Sep '13

Sorry for top posting but this windows phone doesn't let me edit replies! I agree that virtualbox or VMware is an easier option, but the RHCSA exam objectives require me to have knowledge about KVM. I will be running multiple virtual instances of centos from within centos. There is this EFI partition on the hard disk. Not sure what to do with it. Also its different from the good old bios, this EFI won't let my USB drive boot! Regards, adj -----Original Message----- From: "Greg Bailey" <gbailey(a)lxpro.com> Sent: ‎20/‎09/‎2013 16:13 To: "CentOS mailing list" <centos(a)centos.org> Subject: Re: [CentOS] Dual Boot Windows 8 & CentOS 6.4 On 9/20/2013 2:39 AM, amit joshi wrote: > Hi, > > I am studying for the RHCSA Exam and wanted to install CentOS 6.4 alongside Windows 8. I got a new laptop with a processor that supports virtualization. > > I am planning to remove all the recovery partitions after backing up all drivers etc. on them. Lets see how it works out. > > Any caveats I should know about? > > Regards > adj If you have sufficient memory, I'd suggest installing VMware Player or VirtualBox on your Windows 8 installation, and installing CentOS 6.4 as a guest operating system on top of that. It's less likely that you'd accidentally corrupt your Windows 8 setup that way. Some of the virtualization options might come in handy as well, by letting you do things like rolling back to a snapshot, etc., that might help you to repeatedly try different things without risk of having to keep reinstalling CentOS for each thing you want to try. I don't hear as much about dual boot setups these days, likely because most people just run both operating systems at the same time now... -Greg _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

NFS mounted files owned by nobody
by Larry Martell 20 Sep '13

20 Sep '13

I have 2 centos boxes and I want to NFS mount a dir from one to the other. When I do that the files on the client all are owned by nobody.nobody. I verified that the user and group of the files on the server exist on both hosts and have the same uid and gid. I googled and found this: http://whacked.net/2006/07/26/nfsv4nfs-mapid-nobody-domain/ domainname on both machines returns (none). I edited /etc/resolve.conf on both and put 'domain foobar' as the first line in both. But then when I did a 'service network restart' the files were re-written and my changes were gone. On one system /etc/resolve.conf says "Generated by NetworkManager". On the other system it says "generated by /sbin/dhclient-script" (I didn't set these systems up.) I don't even know if this domain stuff is even the correct solution. I just want the NFS mounted dir to retain the real user ownership it has on the server. How can I achieve that? Thanks! -larry (Who's not a sysadmin, and doesn't even play one on TV

3 3

Pulseaudio deson't start automatically in gnome desktop
by C. L. Martinez 20 Sep '13

20 Sep '13

Hi all, I have a strange problem in my CentOS 6.4 (fully patched) workstation: I need to start pulseaudio maunally if I would like to use/listen sound ... And I don't understand why. These are a list of packages related to sound system installed in this workstation: alsa-lib-1.0.22-3.el6.x86_64 alsa-plugins-pulseaudio-1.0.21-3.el6.x86_64 alsa-utils-1.0.22-5.el6.x86_64 gstreamer-0.10.29-1.el6.x86_64 gstreamer-plugins-bad-free-0.10.19-2.el6.x86_64 gstreamer-plugins-base-0.10.29-2.el6.x86_64 gstreamer-plugins-good-0.10.23-1.el6.x86_64 gstreamer-tools-0.10.29-1.el6.x86_64 gnome-media-2.29.91-6.el6.x86_64 gnome-media-libs-2.29.91-6.el6.x86_64 pulseaudio-0.9.21-14.el6_3.x86_64 pulseaudio-gdm-hooks-0.9.21-14.el6_3.x86_64 pulseaudio-libs-0.9.21-14.el6_3.x86_64 pulseaudio-libs-glib2-0.9.21-14.el6_3.x86_64 pulseaudio-utils-0.9.21-14.el6_3.x86_64 Do I need to install something else?? Any idea?? Thanks.

1 0

CentOS-announce Digest, Vol 103, Issue 13
by centos-announce-request＠centos.org 20 Sep '13

20 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1271 CentOS 6 sssd Update (Karanbir Singh) 2. CESA-2013:1274 Important CentOS 6 hplip Update (Karanbir Singh) 3. CESA-2013:1272 Important CentOS 6 libvirt Update (Karanbir Singh) 4. CESA-2013:1270 Important CentOS 6 polkit Update (Karanbir Singh) 5. CESA-2013:1273 Important CentOS 6 spice-gtk Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Sep 2013 12:14:45 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1271 CentOS 6 sssd Update To: centos-announce(a)centos.org Message-ID: <20130919121445.GA29091(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1271 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1271.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1d5f9088e188e417642f1b95c61fd6bc77a07dbb93a460bd4d8510a9e89c668d libipa_hbac-1.9.2-82.10.el6_4.i686.rpm 5645a07eed42e5ac65a7dc4a27a25c7b70d4cf59d5948a7873ac6ac40423ad64 libipa_hbac-devel-1.9.2-82.10.el6_4.i686.rpm 5d3380ce0403ddac55e2a232f6f977663b822e61ed2bd6cc24eb4fb5f73f4545 libipa_hbac-python-1.9.2-82.10.el6_4.i686.rpm 43c3a1c84fd70b033fae5474122b9c5ac3470eea712def764eb4ead0a20a076a libsss_autofs-1.9.2-82.10.el6_4.i686.rpm 0bb309896ff87aa07ed526b59afb91d328b8b15185329bbf8e6fbcefa2d43ade libsss_idmap-1.9.2-82.10.el6_4.i686.rpm c2310840c3d85b45c9987d67af78117c7c46142f0cbec72a32522ed697619faa libsss_idmap-devel-1.9.2-82.10.el6_4.i686.rpm eb07e58cf7d712ce3af1648ee24778ee852df82484b097041a865e12f473d91a libsss_sudo-1.9.2-82.10.el6_4.i686.rpm d986ef8585cc7e5805fa27256d731a9ed45c3e3348fecbf738ed9bfea710e00e libsss_sudo-devel-1.9.2-82.10.el6_4.i686.rpm 86b994d97ad599baecf19a981cc919a66ec7d045f1f0968557f22c6d2789cdc9 sssd-1.9.2-82.10.el6_4.i686.rpm c102b93022981b4fa3cb58a6f88fe9637b082349a8e09bad6a4438b4bcf6fba6 sssd-client-1.9.2-82.10.el6_4.i686.rpm faf4226fdbe27f197973fbc663bb7e4b4091ba16985d6d9c36a0bd33306940a8 sssd-tools-1.9.2-82.10.el6_4.i686.rpm x86_64: 1d5f9088e188e417642f1b95c61fd6bc77a07dbb93a460bd4d8510a9e89c668d libipa_hbac-1.9.2-82.10.el6_4.i686.rpm 7784191d3fee40dd3ecdd7b83a6f0c8528bb16d5629d42b18984b9b3eca158cc libipa_hbac-1.9.2-82.10.el6_4.x86_64.rpm 5645a07eed42e5ac65a7dc4a27a25c7b70d4cf59d5948a7873ac6ac40423ad64 libipa_hbac-devel-1.9.2-82.10.el6_4.i686.rpm 9a998e13af36c7aa1ac46c6a608ae4f2cf7b0f2314ceed8018fb3271168ec276 libipa_hbac-devel-1.9.2-82.10.el6_4.x86_64.rpm b330cdb367580781dc959e3afb0fb70151e2949c3913d4d9cf1264b1e1f6b13b libipa_hbac-python-1.9.2-82.10.el6_4.x86_64.rpm 2675d450d2cd64b8ee5e6177b2f23c68f5089927875529a0dd1ef6bff60b63b4 libsss_autofs-1.9.2-82.10.el6_4.x86_64.rpm 0bb309896ff87aa07ed526b59afb91d328b8b15185329bbf8e6fbcefa2d43ade libsss_idmap-1.9.2-82.10.el6_4.i686.rpm 4779c45eed0cfb5d8842c5cf3a6e1833ebdc0d9fad31c4f42f64e98fa957a07e libsss_idmap-1.9.2-82.10.el6_4.x86_64.rpm adc2a3bcfaec24ce627be2575df9b520b6f615584a5c31e5ad95605aec256b27 libsss_idmap-devel-1.9.2-82.10.el6_4.x86_64.rpm 7d0578f70236030dde0d8bd30cfc0d2c3f555f2be3e69aace7a825c53b945740 libsss_sudo-1.9.2-82.10.el6_4.x86_64.rpm 6dc458af2d13495554e7357a47f2a78769f58d4a14d057338f2dfe05058cdfa1 libsss_sudo-devel-1.9.2-82.10.el6_4.x86_64.rpm 19be1b79cc1840a10bdd78fc67d40e3e3583c0a8686a5b4e02aab98271470f3e sssd-1.9.2-82.10.el6_4.x86_64.rpm c102b93022981b4fa3cb58a6f88fe9637b082349a8e09bad6a4438b4bcf6fba6 sssd-client-1.9.2-82.10.el6_4.i686.rpm 6748dc1829878c3a69cfb50e5bffd79183208ade5cf8babaa2522e424bebd53d sssd-client-1.9.2-82.10.el6_4.x86_64.rpm ecfdd3bdea1180817c0db13916afe15e17147a1b30f4db08a0b4296188697bd1 sssd-tools-1.9.2-82.10.el6_4.x86_64.rpm Source: 23313233fb15ce3fd0f269678c2e652ff00ed9dcb3d1b62e1107a7899eec1fc0 sssd-1.9.2-82.10.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 20 Sep 2013 02:23:59 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1274 Important CentOS 6 hplip Update To: centos-announce(a)centos.org Message-ID: <20130920022359.GA61219(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1274 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1274.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 93cddfcb1e3f280a3c7de2f7182846b8bcdb0b0adc7bad260672e0724791fc88 hpijs-3.12.4-4.el6_4.1.i686.rpm 8f0c93288f15e5f60019ed4086642b517abfe312e85541b0a99c9eba2eb8ebe8 hplip-3.12.4-4.el6_4.1.i686.rpm e0da07e9354fcdc604f265239146afe5897838ad90296b7eafb79ff2ce8799e5 hplip-common-3.12.4-4.el6_4.1.i686.rpm eca0761eedece18c23ab51a25494b41af306cbac37db48bed8f55ca9bf6ef4f2 hplip-gui-3.12.4-4.el6_4.1.i686.rpm 6e39a81c7f066296ffc2139fd67e185b0eb56be51c7f6531abce0918e448c0b9 hplip-libs-3.12.4-4.el6_4.1.i686.rpm 464873552a538b3b1d4b1bbe26d213468c5c84cd7a5635b93ab157da1c59cd9c libsane-hpaio-3.12.4-4.el6_4.1.i686.rpm x86_64: ed8f9ed345b7649322cf582d29fb5d9df6483f9f37a7249f1160e506a8842730 hpijs-3.12.4-4.el6_4.1.x86_64.rpm 6b48b03790fc729f2a27d580899b9e30f8577926bc14d41c6e6d22a317ffd8b5 hplip-3.12.4-4.el6_4.1.x86_64.rpm 112b43275a2dc9306685c20cde6e9cfd5a5b787a522d1ad86fc5f8965c78b553 hplip-common-3.12.4-4.el6_4.1.x86_64.rpm bb0e5bd8d311247fd681066906a6f28d302b64333298db0387207bfcb4b40097 hplip-gui-3.12.4-4.el6_4.1.x86_64.rpm 6e39a81c7f066296ffc2139fd67e185b0eb56be51c7f6531abce0918e448c0b9 hplip-libs-3.12.4-4.el6_4.1.i686.rpm d31a9093a068e2e03f76093a463e9d7a3d465b54f5dd10b5d68bc381902a3843 hplip-libs-3.12.4-4.el6_4.1.x86_64.rpm 5d6a732c7125c5351389be7ea780ebd5955d21f8a1cb7ff5f2c32124c4ed2884 libsane-hpaio-3.12.4-4.el6_4.1.x86_64.rpm Source: da7c5357cd6745c62316d907315662bb49613c023e5ee5d92bd6c93cae2081a2 hplip-3.12.4-4.el6_4.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 20 Sep 2013 02:24:43 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1272 Important CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20130920022443.GA61332(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1272 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1272.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9ff682270c5cc58c144cac1372fd041cc253ef6bb495a857eb0ba09629b596d3 libvirt-0.10.2-18.el6_4.14.i686.rpm bd7ddee327abff3c6e88d3f7fcd9739c0d23ed7bbf0cebf34ab3952418736796 libvirt-client-0.10.2-18.el6_4.14.i686.rpm d5899b912bf93ed84805987d11a637651edfebcaff0a97f59609243abb4f0e91 libvirt-devel-0.10.2-18.el6_4.14.i686.rpm fab2ef048c2b4fc1c4ea86905381abcfbfc62014e22f9496200c219bb9800d7f libvirt-python-0.10.2-18.el6_4.14.i686.rpm x86_64: 70d6428ac084dfa8ad0a8072db8bf7349643d2ca32376d268d5ba25572483a3a libvirt-0.10.2-18.el6_4.14.x86_64.rpm bd7ddee327abff3c6e88d3f7fcd9739c0d23ed7bbf0cebf34ab3952418736796 libvirt-client-0.10.2-18.el6_4.14.i686.rpm fda4e39f0fc32f5d279e071db2cc89382bc5c341341be10fa9bee024e397747c libvirt-client-0.10.2-18.el6_4.14.x86_64.rpm d5899b912bf93ed84805987d11a637651edfebcaff0a97f59609243abb4f0e91 libvirt-devel-0.10.2-18.el6_4.14.i686.rpm 5bfd2804a9ff6976f404c4a03b7a1df68f0d97fc58590d121dd59435257c7dc4 libvirt-devel-0.10.2-18.el6_4.14.x86_64.rpm 957679bed2760a9a18684b30e474e86862438efaebee167380584bee8c978756 libvirt-lock-sanlock-0.10.2-18.el6_4.14.x86_64.rpm 6ea70b39c4a26d9770f29912e4dbf74ccee00770e4d692bcf04cea098cac97f1 libvirt-python-0.10.2-18.el6_4.14.x86_64.rpm Source: 70255384735fecd58720969db63ecb3457c85d4f6eb15e9bced4d057534f3844 libvirt-0.10.2-18.el6_4.14.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 20 Sep 2013 02:25:01 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1270 Important CentOS 6 polkit Update To: centos-announce(a)centos.org Message-ID: <20130920022501.GA61435(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1270 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1270.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1271191da502f7213fa3d981ca1f2e7e16749b639dfca4a17f8608a4986ab6d3 polkit-0.96-5.el6_4.i686.rpm ce7e2f9c500fbe3c7c7dcdffe7be9f5bebd18ce3b7a486bd01b712401bca5095 polkit-desktop-policy-0.96-5.el6_4.noarch.rpm cbd7fbf3e8d4d3368c340ad823ada633e5154b5f11650192cd51098629579e7b polkit-devel-0.96-5.el6_4.i686.rpm 4de93478e8a83da650c425fe0a6cf015f7b447fde931ffa5b80c308536902523 polkit-docs-0.96-5.el6_4.i686.rpm x86_64: 1271191da502f7213fa3d981ca1f2e7e16749b639dfca4a17f8608a4986ab6d3 polkit-0.96-5.el6_4.i686.rpm 5dfdd54cff172c21255dfe9c314729012d2b17194ae6dd7204ddcda4c5a7a652 polkit-0.96-5.el6_4.x86_64.rpm ce7e2f9c500fbe3c7c7dcdffe7be9f5bebd18ce3b7a486bd01b712401bca5095 polkit-desktop-policy-0.96-5.el6_4.noarch.rpm cbd7fbf3e8d4d3368c340ad823ada633e5154b5f11650192cd51098629579e7b polkit-devel-0.96-5.el6_4.i686.rpm bfb5ae32616d546a28cd23b13ddd69b8fbb65fd722453a1c1b9a15a62134e895 polkit-devel-0.96-5.el6_4.x86_64.rpm 99c861cc99130d8e1cd798ff07df4d2c170ae8b024c5967acc6872159c7758d2 polkit-docs-0.96-5.el6_4.x86_64.rpm Source: d72578ec839e8a6531b9b3b3df825aa5a6f81c0cc3b317ec15989bcd40912d7e polkit-0.96-5.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 20 Sep 2013 02:25:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1273 Important CentOS 6 spice-gtk Update To: centos-announce(a)centos.org Message-ID: <20130920022525.GA61561(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1273 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1273.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c7bc8814163e0390fbba942451f909fd2219a985e6d7d80e20406337df9f53d7 spice-glib-0.14-7.el6_4.3.i686.rpm 21fb779dee7388ca315952a13a25863dcf8eaac78085ef7c2f6d838f3358037f spice-glib-devel-0.14-7.el6_4.3.i686.rpm 389e752a57947e83b47afd88c320f67285da0c2f2b5e9690fb89edf100705a37 spice-gtk-0.14-7.el6_4.3.i686.rpm 73c99affb153c83104504e79587bf28e6e3f57467999d94a669ff52bcba252c1 spice-gtk-devel-0.14-7.el6_4.3.i686.rpm fe6a3b157084c07a5c3ceadd681606711d646c55f3e9743ad8d93978ba500794 spice-gtk-python-0.14-7.el6_4.3.i686.rpm c27d2e3a7ee5597e05bf1f70fb27865d8766cc819fffb19ddd35168f68716fdc spice-gtk-tools-0.14-7.el6_4.3.i686.rpm x86_64: c7bc8814163e0390fbba942451f909fd2219a985e6d7d80e20406337df9f53d7 spice-glib-0.14-7.el6_4.3.i686.rpm 9b0705a9cfc12e13f63dd0fd764022acb33befbc74a5d6aeaa8eeac0e28391ef spice-glib-0.14-7.el6_4.3.x86_64.rpm 21fb779dee7388ca315952a13a25863dcf8eaac78085ef7c2f6d838f3358037f spice-glib-devel-0.14-7.el6_4.3.i686.rpm 89e8388b861f00ae72a6ce430a4a7b01e108be11c2c57d7af2a299c56d2e1253 spice-glib-devel-0.14-7.el6_4.3.x86_64.rpm 389e752a57947e83b47afd88c320f67285da0c2f2b5e9690fb89edf100705a37 spice-gtk-0.14-7.el6_4.3.i686.rpm 0387c3a49dda89e9984205bd3f253f695d3d3667f29b216a20ca659beaba0926 spice-gtk-0.14-7.el6_4.3.x86_64.rpm 73c99affb153c83104504e79587bf28e6e3f57467999d94a669ff52bcba252c1 spice-gtk-devel-0.14-7.el6_4.3.i686.rpm c5352f17487b6b09b20b77664c6089a221f17434d89ac773c81d8b208cbf789e spice-gtk-devel-0.14-7.el6_4.3.x86_64.rpm 3df4024ef980d29f111453123c076171eed9933f7fb1e6abbe230f9d1d5a33aa spice-gtk-python-0.14-7.el6_4.3.x86_64.rpm 90a05cc18d4ec3c7ba419537aed537785f8132a718c5e213e2fc4b8b27d2378c spice-gtk-tools-0.14-7.el6_4.3.x86_64.rpm Source: a2415f770b600330e06d3a86f2cc10a9e4f06f41d1b342f78ac1774668de5521 spice-gtk-0.14-7.el6_4.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 13 ************************************************

1 0

Centos 5.0 Printer Reshare
by John Krautkramer 20 Sep '13

20 Sep '13

Hi, I have a number of networked printers configured on my server. Some are mounts from other SMB servers, some are directly connected via socket://ip_address:9100. I can't find how to allow other Unix/Linux machines to use these printers. I need to re-share them for use by these other machines. Any ideas or direction to look? Best Regards, John

2 1

CentOS-announce Digest, Vol 103, Issue 12
by centos-announce-request＠centos.org 19 Sep '13

19 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CentOS Dojo, 30th Sept 2013 at New Orleans, LA, USA (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 18 Sep 2013 17:24:38 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CentOS Dojo, 30th Sept 2013 at New Orleans, LA, USA To: CentOS Announcements List <centos-announce(a)centos.org> Message-ID: <5239D3C6.7080709(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, The next CentOS Dojo is going to take place at New Orleans on the 30th Sept 2013, colocated with the cpanel conference; Our focus for this Dojo is onpremise and hosting specific talks. The day runs from 09:30 to 17:30, followed by sponsored drinks that run pretty much into the night ( keeping in line with New Orleans traditions, I am told ). We have five confirmed speakers on the day, along with slots for lightning talks and BoF sessions, so if there is something you want to talk about, get in touch with one of us ( http://wiki.centos.org/JimPerrin or http://wiki.centos.org/KaranbirSingh ). Details on the Event : http://wiki.centos.org/Events/Dojo/NewOrleans2013 Registration URL: https://centosdojoneworleans2013.eventbrite.co.uk/ Note that this is a not for profit event, the aim on the day is to demonstrate and build user knowledge on technologies built on and around CentOS Linux. Registration costs are recycled into the drinks session that evening and towards CentOS T-Shirts that we would like to hand out on the day. And thanks to the guys at Cpanel ( http://cpanel.net ) for sponsoring the venue and helping bring the CentOS Dojo to New Orleans. Look forward to seeing you there, - -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlI508YACgkQMA29nj4Tz1vBlQCfRH3OlBSSjHq6Rk9SGh5O3YCD dRIAn17Du8FwvMo+QrRqCcyv3FqZfScP =Zsge -----END PGP SIGNATURE----- ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 12 ************************************************

1 0

why kdm crashes
by Miranda Hawarden-Ogata 19 Sep '13

19 Sep '13

We have a pretty standard installation of CentOS 6.4 on our workstations. We've been running into issues where kdm crashes every once in a while when someone tries to log in on the console. The only way to recover when it happens seems to be to restart kdm (kill -HUP `pgrep -f /usr/bin/kdm`) (or reboot of course) and it never seems to happen twice in a row. I am not sure where to start looking to see why kdm would crash like this so intermittently. Does anyone have any idea why this might be happening? -- Thanks! Miranda

1 0

SAMBA update appears to have breoken WinShare connectivity
by James B. Byrne 18 Sep '13

18 Sep '13

We have a very old MS-Windows domain running on a Win2K advanced server. After the most recent update to Samba it appears that we can no longer connect to shares on that system from our CentOS-6.4 workstations. Is this a known problem or configuration issue that we need to address through local modifications or do we have to roll back to the older version to regain connectivity? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

How to use watchdog daemon with hardware watchdog driver interface?
by Alexander Farber 18 Sep '13

18 Sep '13

Good morning! On a CentOS 6.4 / 64 bit server I have installed the watchdog 5.5 package. The rpm -qi watchdog states: The watchdog program can be used as a powerful software watchdog daemon or may be alternately used with a hardware watchdog device such as the IPMI hardware watchdog driver interface to a resident Baseboard Management Controller (BMC). ... This configuration file is also used to set the watchdog to be used as a hardware watchdog instead of its default software watchdog operation. In the dmesg output of my server ( full text at http://pastebin.com/GbF7dRt7 ) I see such a device: NMI watchdog enabled, takes one hw-pmu counter. ... ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) ... iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) My question is: what should I put into /etc/watchdog.conf to enable the hardware watchdog instead of the default software watchdog mode? I've also asked this question at http://serverfault.com/questions/539816/how-to-use-watchdog-daemon-with-har… Thank you Alex

2 3

CentOS-announce Digest, Vol 103, Issue 11
by centos-announce-request＠centos.org 18 Sep '13

18 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1247 CentOS 6 logwatch FASTTRACK Update (Karanbir Singh) 2. CESA-2013:1268 Critical CentOS 5 firefox Update (Karanbir Singh) 3. CESA-2013:1269 Important CentOS 5 thunderbird Update (Karanbir Singh) 4. CESA-2013:1268 Critical CentOS 6 firefox Update (Karanbir Singh) 5. CESA-2013:1269 Important CentOS 6 thunderbird Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 17 Sep 2013 16:13:27 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1247 CentOS 6 logwatch FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130917161327.GA22301(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1247 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1247.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6d69d3e27ace93a426d83e3ba0e53e06a3eb34dcbbd0a56bff31b9ac8930322f logwatch-7.3.6-52.el6.noarch.rpm x86_64: 6d69d3e27ace93a426d83e3ba0e53e06a3eb34dcbbd0a56bff31b9ac8930322f logwatch-7.3.6-52.el6.noarch.rpm Source: 3b817c411e415bd9485d5bb584873cd157b24c753d383c33fac1e57c3ff41013 logwatch-7.3.6-52.el6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 17 Sep 2013 21:32:06 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1268 Critical CentOS 5 firefox Update To: centos-announce(a)centos.org Message-ID: <20130917213206.GA32670(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1268 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1268.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 688871d5a46970b539e3dd10c547a2c4c33a58dd8e1dcdc79af1b327a14bdfef firefox-17.0.9-1.el5.centos.i386.rpm 365b7a2c2e3d0920c57ba034ad065d10bea3e12d9c99ca2ff2c8fa79ca532786 xulrunner-17.0.9-1.el5_9.i386.rpm b0e1a0c5fa42ee273c121220cdc0d872b51bccea2ea069da40bf37ee2b50d98d xulrunner-devel-17.0.9-1.el5_9.i386.rpm x86_64: 688871d5a46970b539e3dd10c547a2c4c33a58dd8e1dcdc79af1b327a14bdfef firefox-17.0.9-1.el5.centos.i386.rpm 2790982a014c6c269ac6a8d6a3fe8312de42894f02cd7bf934b744c2e2e4ceb6 firefox-17.0.9-1.el5.centos.x86_64.rpm 365b7a2c2e3d0920c57ba034ad065d10bea3e12d9c99ca2ff2c8fa79ca532786 xulrunner-17.0.9-1.el5_9.i386.rpm 1c24cc71ea3c6d78809c1342708fcfa424434a9d1ab4e37872929545cd3ebfcb xulrunner-17.0.9-1.el5_9.x86_64.rpm b0e1a0c5fa42ee273c121220cdc0d872b51bccea2ea069da40bf37ee2b50d98d xulrunner-devel-17.0.9-1.el5_9.i386.rpm 9c2ceafa5e7394e86002de2eb8fd3fc3bcd33e5ea3b5503f6c033a0d6e85098a xulrunner-devel-17.0.9-1.el5_9.x86_64.rpm Source: 491234d38894708d9f26ff826f7bc2e9fc7fba9ac83e6e7f067373fdbe737c54 firefox-17.0.9-1.el5.centos.src.rpm 897c9d52fc82a278f0c1ed9536bbe3670ecf0730ff07dc0b134564f457afd00b xulrunner-17.0.9-1.el5_9.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 17 Sep 2013 21:34:04 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1269 Important CentOS 5 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20130917213404.GA32737(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1269 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1269.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b7b9500b9770f88a7aa71826049c2780785d8240ac09c53b747237bda2d95be1 thunderbird-17.0.9-1.el5.centos.i386.rpm x86_64: cffe67c30db36b5c3135570dc429214afc1434263e646769a6bff2a810baaf05 thunderbird-17.0.9-1.el5.centos.x86_64.rpm Source: c2d9d67ee391f7513b108da7cc31b5fb18b96595225c870096761270a06e73cb thunderbird-17.0.9-1.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 18 Sep 2013 00:47:12 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1268 Critical CentOS 6 firefox Update To: centos-announce(a)centos.org Message-ID: <20130918004712.GA49522(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1268 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1268.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e97f2189307258aea1ae2cd10297d80950489c536a9d043323404a3f38cb24f7 firefox-17.0.9-1.el6.centos.i686.rpm 40a5de7d8f9b30e6fd3e4e4b7197d5b82455f5cc60646d0bc5d2fdc1d5175a97 xulrunner-17.0.9-1.el6.centos.i686.rpm 6729d7e0210220f3ed57867b2ec8f6a3192d9989748272435b322af1bb9b56a8 xulrunner-devel-17.0.9-1.el6.centos.i686.rpm x86_64: e97f2189307258aea1ae2cd10297d80950489c536a9d043323404a3f38cb24f7 firefox-17.0.9-1.el6.centos.i686.rpm b580aec987e74463b7c5ff668ff0ad18d11b1b3f14e1f36ce3f43a2ac9b8dc87 firefox-17.0.9-1.el6.centos.x86_64.rpm 40a5de7d8f9b30e6fd3e4e4b7197d5b82455f5cc60646d0bc5d2fdc1d5175a97 xulrunner-17.0.9-1.el6.centos.i686.rpm 5c8c0b517729e678a97b121feec431e1355dbbda51aa1cdf6feade83a6f0ac4e xulrunner-17.0.9-1.el6.centos.x86_64.rpm 6729d7e0210220f3ed57867b2ec8f6a3192d9989748272435b322af1bb9b56a8 xulrunner-devel-17.0.9-1.el6.centos.i686.rpm c2e3aa043a47ded78900c1711daf35c10c8736f1d3ffa0e2c2bbb738a74f1f26 xulrunner-devel-17.0.9-1.el6.centos.x86_64.rpm Source: c2ed98dec83e98e1653a4e24a17bd020f7d3927a5050b638dccdbc1e6bf2c2b2 firefox-17.0.9-1.el6.centos.src.rpm 132447b05ea62785c080adea4a6e548cd28375cb1ca27634b90b82ee047779c6 xulrunner-17.0.9-1.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 18 Sep 2013 00:48:08 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1269 Important CentOS 6 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20130918004808.GA49621(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1269 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1269.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 92c2357f28f42c716214c672e37d6aaf577836b46dc51ba8492e90f7b563dbe4 thunderbird-17.0.9-1.el6.centos.i686.rpm x86_64: c980e36ed364dd6ad1144ef7d14357c128d8baf4b8616a8d9f7847cda14fa283 thunderbird-17.0.9-1.el6.centos.x86_64.rpm Source: 731cf65eedf23ef7c2ceae8091ff115594856433d82ae6073a6a5ecca54e5b64 thunderbird-17.0.9-1.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 11 ************************************************

1 0

dwm
by Jerry Geis 17 Sep '13

17 Sep '13

I downloaded dwm and installed - all is fine. The manual says Once installed, add to your $HOME/.xinitrc exec dwm and it should start when you run startx. I did that - if I run startx this works... however - if I am running X from /etc/inittab how do I start up dwm ? Thanks, Jerry

2 1

- add tun/tap module in VPS Centos 6.4
by Paolo De Michele 17 Sep '13

17 Sep '13

Hi, I purchased a VPS with OpenVZ with infrastructure installed Centos 6.4 64bit. When I configure OpenVPN for remote access I can not because I do not get loaded into the interface modules tun / tap from console: #cat /dev/net/tun cat: /dev/net/tun: No such file or directory #lsmod | grep tun # # uname -r 2.6.32-042stab079.6 I have to ask for support to those who sold the VPS or can I fix myself? Thanks in advance

2 1

easy BASH question
by James B. Byrne 17 Sep '13

17 Sep '13

I am obviously missing something basic here but can someone explain to me what is wrong with the first statement, which returns nothing? $ history | grep ^su $ history | grep su 2997 su -l 3024 su -l 3050 su -l 3054 su -l Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 4

CentOS-announce Digest, Vol 103, Issue 10
by centos-announce-request＠centos.org 17 Sep '13

17 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1267 CentOS 5 rgmanager Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 17 Sep 2013 10:48:39 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1267 CentOS 5 rgmanager Update To: centos-announce(a)centos.org Message-ID: <20130917104839.GA32620(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1267 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1267.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 150ec6e4d322371b90276f0a545f2748d5043a028748fa5d0c6ded152c8e3aba rgmanager-2.0.52-37.el5.centos.4.i386.rpm x86_64: b5c86969523e6834fd46019335f5af96e09591090070010188f102f658fa7edb rgmanager-2.0.52-37.el5.centos.4.x86_64.rpm Source: ea6f05053e86b17f3b67c0b0050ee2b4acc348bc49b46a762e1a8ce19375b3bc rgmanager-2.0.52-37.el5.centos.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 10 ************************************************

1 0

Difficulty building custom Install CD
by Rajagopal Swaminathan 17 Sep '13

17 Sep '13

Greetings, I am trying to follos the procedure as outlined in: http://smorgasbork.com/component/content/article/35-linux/128-building-a-cu… I am using Cendos minimal ISO to build a custom installer and Live CD (with addition of NTP, samba and some custom application with dependencies) According to the above link: "In RHEL/CentOS 6, this file is no longer called just "comps.xml"; instead, it has some horrendous hex string for a name. In CentOS 6.2, it is named bedb7dc8fdf920deffbdc5a70ea0d6d77255656556184f5e996e8a88a63d145c-c6-x86_64-comps.xml.gz. " Indeed horrendeous file. I am not able find the *comps.xml. What should I do and where would I find it. Else what is the method for pacakaging (Centos 6.4 minimal + some custom app rpms + custom configs) ? -- Regards, Rajagopal

3 5

Re: [CentOS] Apple movie trailers on Centos6/Firefox
by Michael Lampe 17 Sep '13

17 Sep '13

Fred Smith wrote: > Apparently I'm the only Centos user who is unable to view the quicktime > trailers,... or maybe nobody but me is interested. Assuming you have the necessary codecs installed, it still doesn't work, because Apple checks your "QuickTime"-Version with some piece of Javascript. It seems to check the same info you see with 'about:plugins'. The totem plugin says 7.21 which is too low. Make it something higher, like 9.99 to be set forever. -Michael PS: There's no official way to do that. You can either patch and then rebuild from source -- or you just modify the binary ... (I admit to have done the latter.) But this is all you need. The rest is taken care of out of the box.

2 1

Re: [CentOS] This is a test of Nixnet blocking
by m.roth＠5-cent.us 16 Sep '13

16 Sep '13

John R Pierce wrote: > On 9/16/2013 1:29 PM, m.roth(a)5-cent.us wrote: >> No. Block domains. > how? 90%+ of spam has forged FROM addresses. >From crap in my trash from today: Received: from [206.214.95.82] (port=57577 helo=03e6231b.buhlgymgagate.us) by host290.hostmonster.com with esmtp (Exim 4.80) (envelope-from <KohlsGiftCardSurvey(a)buhlgymgagate.us>) id 1VLfOH-0003sR-20 for m.roth(a)5-cent.us; Mon, 16 Sep 2013 14:27:25 -0600 Received: by 03e6231b.bw31almxu.buhlgymgagate.us (amavisd-new, port 10268) with ESMTP id 03NGCCNSDRE623JKCXHVTJ1B; for <m.roth(a)5-cent.us>; Mon, 16 Sep 2013 13:27:24 -0700 To: m.roth(a)5-cent.us List-Unsubscribe: <mailto:unsub-2268-733-2332-11-65411647@buhlgymgagate.us?subject=unsubscribe>, <http://www.buhlgymgagate.us/unsubscribe/2268/733/2332/11/65411647/~~m.roth@…> X-Priority: 3 (Normal) From: "Kohls Gift Card Survey" <KohlsGiftCardSurvey(a)buhlgymgagate.us> So, it looks like mmm, (check whois) Jeff Martinez should be blocked at buhlgymgagate.us. On the other hand, I look at the headers to one of my posts, and I see that it's coming from, ta-da, 5-cent.us. If I were sending out spam, then you'd be perfectly justified in blocking 5-cent.us. mark

2 2

This is a test of Nixnet blocking
by m.roth＠5-cent.us 16 Sep '13

16 Sep '13

Most of the time since last Thursday or so, that piece of crap called Nixnet (ix.manitu) has been blocking my hosting provider's mailservers. I did ask, when I talked to support last week, and they host *millions* of domains. They do not have a million techs (neither does google - but I'm *sure* none of you have ever gotten spam from google mail, right?). Again, I'll give my argument that blocking a mailserver, rather than a domain has been the *WRONG* answer for at least 15 or more years. A dozen or so years ago, they blocked Chicago roadrunner... which provided 'Net access and email to about half the City of Chicago, IL, USA, which, Karanbir, is about a quarter the size of the London metro area, so we're talking hundreds of thousands of people. Now, in days after massive consolidation of ISPs (even the Canadian ISP that userfriendly's Columbia Internet has bee bought and closed up), this means that they're blocking telcos and giant hosting providers. I'm really, REALLY tired of being blocked when a couple dozen domains, hiding out in millions of them at one hosting provider, results in a few million people being blocked from sending email. mark

3 3

Evergreen ILS on CentOS?
by m.roth＠5-cent.us 16 Sep '13

16 Sep '13

I spent a number of hours at one of the local SF clubs turning a desktop into a dual-boot (if they ever need that for anything) CentOS 6.4 system, then trying to install Evergreen, an oss library package. Can you say, "dependency hell"? I suspect they wrote it on Ubuntu (this is client/server software, dunno why they'd do that). At any rate, I yum installed the postgresql 9.x package that pgsql has on their official site, and that installed with no problems at all. Then evergreen. Which wouldn't build, because libmemcache was too old. I tried to build a newer package, after d/l one from the memcache official site. And *that* wouldn't build, because it wanted something that libevent-devel for CentOS 6.4 didn't provide. I've got two possible routes, here: a) I can try to build an older, deprecated version of Evergreen, or I can try to build a newer libevent and stuff - some of which, IIRC, kde wants. Opinions? Suggestions? And if anyone's worked with evergreen, PLEASE TALK TO ME!!! mark

5 6

Gnome 2.x window placement
by Fred Smith 16 Sep '13

16 Sep '13

When starting a program from the commandline in C5, is there any way to specify where on the screen the resulting window will be put? I have a nuisance of a problem: Running rdesktop with the -D option (which hides window decorations, making the rdesktop window appear borderless), one cannot (as far as I can figure out) drag the window: there are no borders to grab, and alt-drag doesn't work either. it's always opening in a place that covers other windows, and I can't drag it away from there. specifically: I want to run two instances of rdesktop, and it always plunks the second one right on top of the first one. since I can't drag either of them, I can't see them both at the same time. (I "carefully" configure each of them so they are the exact size of the physical screen, so that it looks like a real windows session, and also prevents me from casually/stupidly closing the entire RDP window by accident.) Since I have two displays, I'd like to place one of them on each screen, by itself. Anyone know how to solve this? thanks! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The eyes of the Lord are everywhere, keeping watch on the wicked and the good. ----------------------------- Proverbs 15:3 (niv) -----------------------------

2 2

converting a RHEL box to CentOS
by Alan McKay 16 Sep '13

16 Sep '13

Hey folks, Google found nothing in this list archives for me but did find this : http://www.unixmen.com/how-to-jul-convert-rhel-5-to-centos-5/ Before I just go try that on one of my systems can someone confirm that it works? I'm running RHEL 5.7 so I guess I'd replace the 5.4 in the URL with 5.7 Basically I let my RHEL licenses run out (never really used them) and am getting warnings now from yum. Want to just switch over to the CentOS repos. Anything to be wary of doing this? thanks, -Alan -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

2 4

CentOS-announce Digest, Vol 103, Issue 9
by centos-announce-request＠centos.org 16 Sep '13

16 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1187 CentOS 6 boost FASTTRACK Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 16 Sep 2013 09:19:36 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1187 CentOS 6 boost FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130916091936.GA2619(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1187 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1187.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4d9890eb6188a0e2b4cb664cec93cae75a4df4e2ef1f6360b4f9405e495f0175 boost-1.41.0-18.el6.i686.rpm 9856b6443740b8cbb217adeb51d90da211a5d395284712ec9e04554e2366eff7 boost-date-time-1.41.0-18.el6.i686.rpm 28a376308e89527eea6b795a820b4bd995a3ca33dd226bc74da75edd82c2c2c4 boost-devel-1.41.0-18.el6.i686.rpm 3debbceff13b6e966963b7fb2110cbecf509b6b72e365d041db09a5b5137def0 boost-doc-1.41.0-18.el6.i686.rpm 733adb4fe55eda57f4d1bee57c78b5705d3d5341c7fe729005c615cb626df2cb boost-filesystem-1.41.0-18.el6.i686.rpm aee63071a28d0ecd5432bd041ca2711dc8e2185785eb47cebec69907212d9801 boost-graph-1.41.0-18.el6.i686.rpm f115d575b4b0f0bb5e75aee5fa87feef975c59ee13e645bc3d1c05363da440eb boost-graph-mpich2-1.41.0-18.el6.i686.rpm a2289f4ef3d7af0dd747fbfa8b34b4cd06854b4c3acf9349c8eb2098aeb3e792 boost-graph-openmpi-1.41.0-18.el6.i686.rpm bf912b0ec04ce5b9a7a2c478d43163c812c69962aec063d5a6b31425dd2ecaa8 boost-iostreams-1.41.0-18.el6.i686.rpm d12b37f305bbfe563b1d2aa479234b91d9ad066bedba61fb842b3a3f61463b39 boost-math-1.41.0-18.el6.i686.rpm be8cbe4cafd43078eff9fef592b884e9c96a3a251080ecb5a5a919b2fa14b00e boost-mpich2-1.41.0-18.el6.i686.rpm 3b0ecee62c4779e15e8f145182f41a5cbf4e3094ed4293126ccd12fe089ab4ba boost-mpich2-devel-1.41.0-18.el6.i686.rpm a09e48663a1d0c1cae9a5da9be60fe3d583f2e6712190dd4c02b32adaeb8171a boost-mpich2-python-1.41.0-18.el6.i686.rpm 48a64ead64a77b4c2624ef5c737bb190ab87e790a37063c75328a29f487e4030 boost-openmpi-1.41.0-18.el6.i686.rpm 08fa9c5c9b8f91c5caf9bca1dc60c8fdf029385988238c9659862f5e7de58789 boost-openmpi-devel-1.41.0-18.el6.i686.rpm 14db22ff093d2a9f2ffa66b281a386427f23426c850f39814a74aa5ee1929fea boost-openmpi-python-1.41.0-18.el6.i686.rpm 459d068fdbbf67c756873fefaf25e9571c9d65a39ca3ffb3e09545c02948a75e boost-program-options-1.41.0-18.el6.i686.rpm 0ec9fb0394303b17d28d5a280743cb2633533d84e8ec9ad113bc71cafcb59b28 boost-python-1.41.0-18.el6.i686.rpm 1b4e6082cdec6b05b7c6762fc868adc6c37c47f67d0608a7aa4c03de83a7b5ad boost-regex-1.41.0-18.el6.i686.rpm 909d01c52b41c5ca8f62d603d518b4ef269e2f70c00db61fde6f05c8487f2ced boost-serialization-1.41.0-18.el6.i686.rpm ad20087719810b533a64e00727da44f966caccf96f75efb026f13913a6f503dc boost-signals-1.41.0-18.el6.i686.rpm 1d737956df79334357a556ef126969568906c4289d35bb7e37335f90cf6465d1 boost-static-1.41.0-18.el6.i686.rpm 33ad5e6f155534126737a85ea7eb2837055ddda3fedff50cbe58d47eb53e98f9 boost-system-1.41.0-18.el6.i686.rpm df871c9a23c0d956874017945e1486855a297c4ccdc4f9c31e61fdb672707ab6 boost-test-1.41.0-18.el6.i686.rpm 5491d6fc1b80c96562a7ebd6b5b963b3e11c2f7ee6dcb7ebb4886f50298def46 boost-thread-1.41.0-18.el6.i686.rpm b1196e9127e10747378822b55c19f6ec37c51c65b3b163d01652f547290894bc boost-wave-1.41.0-18.el6.i686.rpm x86_64: 7783ffe8d9e1848eedfb5c110adc4acd730e06c7307b39751d2bd996c69378d5 boost-1.41.0-18.el6.x86_64.rpm 9856b6443740b8cbb217adeb51d90da211a5d395284712ec9e04554e2366eff7 boost-date-time-1.41.0-18.el6.i686.rpm e9d5b1aa56bb10d550bb87077f017864dde92cd609f677df90ec2805f2196e01 boost-date-time-1.41.0-18.el6.x86_64.rpm 28a376308e89527eea6b795a820b4bd995a3ca33dd226bc74da75edd82c2c2c4 boost-devel-1.41.0-18.el6.i686.rpm 49ae659966ae8a83d2913a0c33ba9d77409ec785cc27df94b3df2abb14ea863d boost-devel-1.41.0-18.el6.x86_64.rpm bad6fcff987ec346102c3c5941cf1c61a23a24ad571d6023d65a8c439ac4c0cd boost-doc-1.41.0-18.el6.x86_64.rpm 733adb4fe55eda57f4d1bee57c78b5705d3d5341c7fe729005c615cb626df2cb boost-filesystem-1.41.0-18.el6.i686.rpm b78aff9276d7fff2c66c681a0dbf7de3b81d24a95c75147bcfe285cb48a74b6f boost-filesystem-1.41.0-18.el6.x86_64.rpm aee63071a28d0ecd5432bd041ca2711dc8e2185785eb47cebec69907212d9801 boost-graph-1.41.0-18.el6.i686.rpm 7990564f27565c9b6887eacae800542b3ec54d612a2f8786f631c88438763649 boost-graph-1.41.0-18.el6.x86_64.rpm f115d575b4b0f0bb5e75aee5fa87feef975c59ee13e645bc3d1c05363da440eb boost-graph-mpich2-1.41.0-18.el6.i686.rpm e5df643744063bd4235e8c828ba160d3bd7b7d62e3a60f605eb96d596284c1fb boost-graph-mpich2-1.41.0-18.el6.x86_64.rpm 09019ba016029273a50330ef51ca57b6961c412b2697840085cb1d2ccaaeb6f2 boost-graph-openmpi-1.41.0-18.el6.x86_64.rpm bf912b0ec04ce5b9a7a2c478d43163c812c69962aec063d5a6b31425dd2ecaa8 boost-iostreams-1.41.0-18.el6.i686.rpm 50df8ff778266417936fd4f52029eda29f62c0c71964face9f83573e647140d0 boost-iostreams-1.41.0-18.el6.x86_64.rpm 5e8432dccbbfef1d48bb5406a0f968b8949d3478ecf4f88613670df90f291de8 boost-math-1.41.0-18.el6.x86_64.rpm be8cbe4cafd43078eff9fef592b884e9c96a3a251080ecb5a5a919b2fa14b00e boost-mpich2-1.41.0-18.el6.i686.rpm d7c919076e9afda07b73b1f8d9600f23c157c03c1ed5048cb8d6c8b8e333ced7 boost-mpich2-1.41.0-18.el6.x86_64.rpm 3b0ecee62c4779e15e8f145182f41a5cbf4e3094ed4293126ccd12fe089ab4ba boost-mpich2-devel-1.41.0-18.el6.i686.rpm dd875b3dab03701018bfddda0bb52615301ed176f89fe524c4c3e9954032ca2e boost-mpich2-devel-1.41.0-18.el6.x86_64.rpm a09e48663a1d0c1cae9a5da9be60fe3d583f2e6712190dd4c02b32adaeb8171a boost-mpich2-python-1.41.0-18.el6.i686.rpm b124692016a8fc31c78c5f47275d5575e182ca47dbb0e3460751df5fa1972e25 boost-mpich2-python-1.41.0-18.el6.x86_64.rpm f62f757aefc792275d16f9f81bf6276b4cd07e611fc0bbe0f991f6388b5eb2dd boost-openmpi-1.41.0-18.el6.x86_64.rpm 08fa9c5c9b8f91c5caf9bca1dc60c8fdf029385988238c9659862f5e7de58789 boost-openmpi-devel-1.41.0-18.el6.i686.rpm 764730b56396280cdda03f90c3fe97e521e13d0a2ebbe4c8407a66bf8d6cbf7d boost-openmpi-devel-1.41.0-18.el6.x86_64.rpm 8429355e1cb5a38622072ae4f7124d450a8f482c4388077f769e854c3904f532 boost-openmpi-python-1.41.0-18.el6.x86_64.rpm 459d068fdbbf67c756873fefaf25e9571c9d65a39ca3ffb3e09545c02948a75e boost-program-options-1.41.0-18.el6.i686.rpm b43e30bd1f1a984f236f83bc6ee8a9e160444b1fa3daa5366d146d063a33e1a1 boost-program-options-1.41.0-18.el6.x86_64.rpm 0ec9fb0394303b17d28d5a280743cb2633533d84e8ec9ad113bc71cafcb59b28 boost-python-1.41.0-18.el6.i686.rpm 279467078cccee122231193533beb064c18afb701d071dfe0aa6d47f416c7472 boost-python-1.41.0-18.el6.x86_64.rpm 1b4e6082cdec6b05b7c6762fc868adc6c37c47f67d0608a7aa4c03de83a7b5ad boost-regex-1.41.0-18.el6.i686.rpm f91349c53b65ce28341c267e3e8792ae5e0cee52d25f448141059bc5f62de93f boost-regex-1.41.0-18.el6.x86_64.rpm 909d01c52b41c5ca8f62d603d518b4ef269e2f70c00db61fde6f05c8487f2ced boost-serialization-1.41.0-18.el6.i686.rpm ff2cd1d39c25bb0f6299c97e195d0a1d71a9be2e5ea88688b57d2456f67d8d99 boost-serialization-1.41.0-18.el6.x86_64.rpm ad20087719810b533a64e00727da44f966caccf96f75efb026f13913a6f503dc boost-signals-1.41.0-18.el6.i686.rpm fecde23a33ae6180dfe5479ad8a7611d5e5a1864dbd8a7ed7c44ef8f3b7042e3 boost-signals-1.41.0-18.el6.x86_64.rpm 83b7489e81079fd73b08a6a4668e03094399147e0dab2c129e0f2e811c76e2ab boost-static-1.41.0-18.el6.x86_64.rpm 33ad5e6f155534126737a85ea7eb2837055ddda3fedff50cbe58d47eb53e98f9 boost-system-1.41.0-18.el6.i686.rpm 1735b4ee26281f6a8c72128b443afc6ad3eb3f5ed66d711a76936c62c9144772 boost-system-1.41.0-18.el6.x86_64.rpm df871c9a23c0d956874017945e1486855a297c4ccdc4f9c31e61fdb672707ab6 boost-test-1.41.0-18.el6.i686.rpm f917020609135bc1ce2a513a60ab9cb317321d87fe8c49c9f672cbf192879f3c boost-test-1.41.0-18.el6.x86_64.rpm 5491d6fc1b80c96562a7ebd6b5b963b3e11c2f7ee6dcb7ebb4886f50298def46 boost-thread-1.41.0-18.el6.i686.rpm e8065409c1511f0dccc29a8cae91272a6b4873685fb4492a05da4eb9164608ab boost-thread-1.41.0-18.el6.x86_64.rpm b1196e9127e10747378822b55c19f6ec37c51c65b3b163d01652f547290894bc boost-wave-1.41.0-18.el6.i686.rpm 9f8a37e98f9a46c64fe2dbb196bea1c31a1469df089f2d2d81c02fe960ecb0b4 boost-wave-1.41.0-18.el6.x86_64.rpm Source: 60624a3f0fab9641d180ff6f2c9a95176d69bf8feb4be92431cff29362708d0f boost-1.41.0-18.el6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 9 ***********************************************

1 0

crond sometimes launches a child process?
by Rafał Radecki 16 Sep '13

16 Sep '13

Hi All. I monitor number of crond processes on my machines. On one of them I have 2 crond processes for a short period of time (few minutes) everyday. It is at the same time when one jobs starts to run - a sphinx indexer. What are the possible causes of crond running a child crond process? Best regards, Rafal.

2 1

Final Term on CentOS
by Fabrizio Di Carlo 16 Sep '13

16 Sep '13

Hello to all, broswing on Internet I've found this very smart Terminal Emulator and I think that can be useful for someone of you. The address of the project is http://finalterm.org/ . Someone use it? Regards, Fabrizio -- "The intuitive mind is a sacred gift and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." (A. Einstein) "La mente intuitiva è un dono sacro e la mente razionale è un fedele servo. Noi abbiamo creato una società che onora il servo e ha dimenticato il dono." (A. Einstein) Fabrizio Di Carlo

1 0

repo for revisor/pungi
by Rajagopal Swaminathan 16 Sep '13

16 Sep '13

Greetings, I am almost tearing my hear out searching for revisor for Centos 6. I am aware that SL6 has it. The question is safe to use it? It seems fedorahosted.org or fedora unity does not have it... http://files.revisor.fedoraunity.org/ return more or less a blank screen Any help is appreciated. -- Regards, Rajagopal

1 0

grub command line
by Ahmad AlTwaijiry 15 Sep '13

15 Sep '13

Hello Everyone I have a remote CentOS 6.4 server (with KVM access), when I received the server it was running with LVM on single disk (sda) I managed to remove LVM and install raid 1 in sda and sdb disks the mirroring is working fine, my only issue now is that everytime I reboot the server I got the grub command line and I have manually boot using comand grub> configfile (hd1,0)/grub/grub.conf OR grub> configfile (hd0,0)/grub/grub.conf then it will boot fine without any error. Any idea how can I make it auto boot ? I tried almost everything I can find in the internet. Note: each disk (sda & sdb) is 2TB size, could this be the problem? . # df -h Filesystem Size Used Avail Use% Mounted on /dev/md2 1.8T 1.1G 1.7T 1% / tmpfs 16G 0 16G 0% /dev/shm /dev/md0 1.9G 69M 1.8G 4% /boot # cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sda3[2] sdb3[0] 1940882240 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb2[0] sda2[2] 10482176 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb1[0] sda1[1] 2008000 blocks [2/2] [UU] unused devices: <none> # fdisk -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b0530 Device Boot Start End Blocks Id System /dev/sda1 * 1 250 2008093+ 83 Linux /dev/sda2 251 1556 10490445 82 Linux swap / Solaris /dev/sda3 1557 243201 1941013462+ fd Linux raid autodetect # fdisk -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xadb3bd62 Device Boot Start End Blocks Id System /dev/sdb1 * 1 250 2008093+ fd Linux raid autodetect /dev/sdb2 251 1556 10490445 82 Linux swap / Solaris /dev/sdb3 1557 243201 1941013462+ fd Linux raid autodetect # cat grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_srv6953-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-358.18.1.el6.x86_64) root (hd1,0) kernel /vmlinuz-2.6.32-358.18.1.el6.x86_64 ro root=/dev/md2 KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 crashkernel=auto rhgb quiet rd_retry=20 initrd /initramfs-2.6.32-358.18.1.el6.x86_64.img title CentOS (2.6.32-358.el6.x86_64) root (hd1,0) kernel /vmlinuz-2.6.32-358.el6.x86_64 ro root=/dev/md2 KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-358.el6.x86_64.img

2 2

viirt-who Problem or my mistake ?
by Günther J. Niederwimmer 15 Sep '13

15 Sep '13

Hello, I am new on centos and have installed a KVM Server, now on my host i have on a new start a Error from virt-who and virt-who never starts. root@bbs init.d]# service virt-who start virt-who starten: Traceback (most recent call last): File "/usr/share/virt-who/virt-who.py", line 33, in <module> from subscriptionmanager import SubscriptionManager, SubscriptionManagerError File "/usr/share/virt-who/subscriptionmanager.py", line 24, in <module> import rhsm.connection as rhsm_connection ImportError: No module named rhsm.connection [FEHLGESCHLAGEN] Is some missing or have I installed to much ;) -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer

2 3

audio tagtool vs recent glibc update
by wwp 15 Sep '13

15 Sep '13

Hello there, is it me or a recent glibc update in CentOS6 did break audio tagtool? It now shows utf8 conversion errors and crashes. A rebuild from the sources didn't help. Regards, -- wwp

1 0

Building CentOS 6.2 custom install media
by Daniel Drake 14 Sep '13

14 Sep '13

Hi, For the OLPC school server ("XS") we are planning to move from our dated F9 setup to CentOS 6.2. Thanks for all the effort involved in producing this distro. One important part of this project is a 'respin' of the install media - we need to add a handful of packages from external repositories, and maybe run a command late in the install. Are the scripts/configurations used to produce the CentOS official CD/DVDs available? I guess this would be our most reliable/sensible starting point. I am familiar with pungi, kickstart, anaconda, etc, so just a simple git link would be enough to get me started. Thanks, Daniel

5 7

Dojo London 2013
by Julio Martinez 14 Sep '13

14 Sep '13

Thank you Karanbir and everyone who came to ITV for making CentOS Dojo a great success. It was a pleasure to have you all. Julio Martinez </PRE><a href="http://www.itv.com"><img src="https://lh5.googleusercontent.com/-YJsNOaY5C2A/UPOvkVzskII/AAAAAAAAAKU/3Vqc…"/></a> <br><br> </PRE><a href="http://www.itv.com"><img src="https://lh5.googleusercontent.com/-jry69XRAzXQ/UjL2Ymeg7nI/AAAAAAAAAj0/3x0M…"/></a> <br><br> <div style="font-size: x-small">ITV plc (Registration No. 4967001) (ITV) is incorporated in England and Wales with its registered office at The London Television Centre, Upper Ground, London SE1 9LT. Please visit the official ITV website at www.itv.com for the latest company news. The contents of this email and any attachments are confidential, may be privileged, may be subject to copyright and are intended solely for the use of the individual to whom they are addressed. If you have received this email and you are not the intended recipient please notifypostmaster(a)itv.com and delete this email and you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email are strictly prohibited. Although ITV routinely screens for viruses, recipients should scan this email and any attachments for viruses. ITV makes no representation or warranty that this email or any of its attachments is free of viruses or defects and does not accept any responsibility for any damage caused by any virus or defect transmitted by this email. ITV reserves the right to monitor all e mails and the systems upon which such e mails are stored or circulated. This email does not conclude a binding agreement. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of ITV. Thank You

1 0

Cloning CentOS workstations
by Glenn Eychaner 13 Sep '13

13 Sep '13

I manage a set of CentOS operations workstations which are all clones of each other (3 "live" and 1 "spare" kept powered down); each has a single drive with four partitions (/boot, /, /home, swap). I've already set up cron'd rsync jobs to copy the operations accounts between the workstations on a daily basis, so that when one fails, it is a simple, quick process to swap in the spare, restore the accounts from one of the others, and continue operations. This has been successfully tested in practice on more than one occasion. However, when I perform system updates (about once a month), I like to create a temporary "clone" of the system to an external drive before running the update, so that I can simply swap drives or clone back if something goes horribly wrong. I have been using "CloneZilla" to do this, but it can take a while since it blanks each partition before copying, and requires a system shutdown. Question 1: Would it be sufficient to simply use CloneZilla once to initialize the backup drive (or do it manually, but CloneZilla makes it easy-peasy), and then use "rsync -aHx --delete" (let me know if I missed an important rsync option) to update the clone partitions from then on? I am assuming that the MBR typically doesn't get rewritten during system updates, though "/etc/grub.conf" obviously does get changed. Suppose I want to store more than one workstation on a single drive (easy), and be able to boot into any of the stored configurations (hard). Here's what I thought of: 1) Create a small "master" partition which contains a bootloader (such as a CentOS rescue disk), and a single "swap" partition. 2) Create one partition "set" per workstation (/boot, /, /home, excluding swap). Obviously, these will all likely be logical, and each workstation must use unique labels for mounting partitions. 3) On the "master" partition, modify the bootloader menu to allow one to chainload the /boot partitions for each configuration. (This is the "Voila!" step that I haven't fully figured out.) Question 2: Is there a better way to do the above? How do I perform the "Voila!" step, i.e. what's the right chainload command for this? Also, the chainloaded partitions are logical; is this OK? I also have a single off-site NAS disk which contains clones of all the critical workstations on-site. Most of them are Macs, so I can use sparseimages on the NAS for the clones and get easy-peasy incremental clones. I also do this for the Linux box (backing it up incrementally to an HFS case-sensitive sparseimage via rsync), but it's (obviously) a bit of a kludge. Question 3: Is there a UNIX equivalent to the Mac sparseimage that I should be using for this? ("tar -u" can do it (duh), but then the backup file grows without bound.) Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

3 2

Re: [CentOS] Errors on NFS server
by Sajesh Singh 13 Sep '13

13 Sep '13

> -----Original Message----- > From: Barbara Krasovec [mailto:barbarak@arnes.si] > Sent: Friday, September 13, 2013 8:48 AM > To: Sajesh Singh > Subject: Re: [CentOS] Errors on NFS server > > We had similar errors, but installed 3.8.10 kernel from elrepo on the > machine (also HP Proliant DL380 G7). NFS seems to work much better on > that kernel. We see no such errors. > > Cheers, > Barbara Barbara, Thank you for the info. Did you have any issues running the HP drivers on the server after installing the 3.8.10 kernel? -Sajesh-

1 0

MySQL 5.1.69 at CentOS 6.4 doesn't know enable-named-pipe?
by Alexander Farber 13 Sep '13

13 Sep '13

Hello, I've only had experience with PostgreSQL sofar, but have now to install MySQL (and WordPress) on a CentOS 6.4 /64 bit server. I have installed the mysql-5.1.69-1.el6_4.x86_64 package and executed the following commands: # chkconfig mysqld on # service mysqld start # /usr/bin/mysqladmin -u root password 'xxxxx' # /usr/bin/mysql_secure_installation Then I've noticed that mysqld_safe process is listening at 0.0.0.0 and decided to change that - so that my WordPress installation only uses domain sockets (or unix pipes? not sure). So I've modified the /etc/my.cnf to: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 bind-address = localhost skip-networking enable-named-pipe [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid But now MySQL refuses to start: # service mysqld restart Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] The /var/log/mysqld.log contains: mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: Initializing buffer pool, size = 8.0M InnoDB: Completed initialization of buffer pool InnoDB: Started; log sequence number 0 44233 [ERROR] /usr/libexec/mysqld: unknown option '--enable-named-pipe' [ERROR] Aborting InnoDB: Starting shutdown... InnoDB: Shutdown completed; log sequence number 0 44233 [Note] /usr/libexec/mysqld: Shutdown complete mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended I've searched Google and grepped /usr/share/mysql/*.cnf for that directive, but haven't found any hints there. Any hints please? Regards Alex

3 3

CentOS-announce Digest, Vol 103, Issue 8
by centos-announce-request＠centos.org 13 Sep '13

13 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:X011 Xen4CentOS Low libvirt Security Update (Johnny Hughes) 2. CEBA-2013:1258 CentOS 6 db4 Update (Karanbir Singh) 3. CEBA-2013:1259 CentOS 6 ipmitool FASTTRACK Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 12 Sep 2013 13:07:22 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:X011 Xen4CentOS Low libvirt Security Update To: centos-announce(a)centos.org Message-ID: <20130912130722.GA2537(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X010 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- d917cf7d1595bb8d61e5efa7479a93d218c17f711d4333801affe3eb25b7555e libvirt-0.10.2.7-5.el6.centos.alt.x86_64.rpm f51495268775a4bc897cf8b28a27540d9b69787536658c9b39eec66bd33cff10 libvirt-client-0.10.2.7-5.el6.centos.alt.x86_64.rpm 891051996f84f047d385dd5f4c5587adaafe88200a6b023e483ea25cb68ee427 libvirt-daemon-0.10.2.7-5.el6.centos.alt.x86_64.rpm 12b1d48ac541645bad1b2f1a69be24777250e258ae28400795df8cb9056def52 libvirt-daemon-config-network-0.10.2.7-5.el6.centos.alt.x86_64.rpm 6ba428cd2695f69c060a1de888febc43e0d1113cf3f0b05e060c5573c8d60404 libvirt-daemon-config-nwfilter-0.10.2.7-5.el6.centos.alt.x86_64.rpm 35faf8e13095c084a585506e122139511ee9e620fff5745c98e0a5c0571f4616 libvirt-daemon-driver-interface-0.10.2.7-5.el6.centos.alt.x86_64.rpm 42c1372af2e6bf3e6997e4208c7255a0e41f300a848f07cc99e94562ff6d6990 libvirt-daemon-driver-libxl-0.10.2.7-5.el6.centos.alt.x86_64.rpm 2be605e01598741195df0e4696ab2360e37813c300fef1c4792cfef4f28dc125 libvirt-daemon-driver-lxc-0.10.2.7-5.el6.centos.alt.x86_64.rpm 4852ec77347f384612a584872316d66b183f8ea6aeea34f28a216d686922db0a libvirt-daemon-driver-network-0.10.2.7-5.el6.centos.alt.x86_64.rpm 04f7430ff2ac78a0662daca6541370b588f6523ccdb8400643999fae60d6bc8e libvirt-daemon-driver-nodedev-0.10.2.7-5.el6.centos.alt.x86_64.rpm 2a3b473d15313be5032375d48406badb43e20c81e335e0e3d7c36ecdc6819ebf libvirt-daemon-driver-nwfilter-0.10.2.7-5.el6.centos.alt.x86_64.rpm f5621870bf70b35570283357c372a58e5885b61c35e587427458c530e65c2d3a libvirt-daemon-driver-qemu-0.10.2.7-5.el6.centos.alt.x86_64.rpm f369f1d222b98f18beaeec789d3e3c6a2d3806701b7097553ebcdc24ca0ee301 libvirt-daemon-driver-secret-0.10.2.7-5.el6.centos.alt.x86_64.rpm 6facefa56c72fec2920a73722e7bc52f191cc7959c0221a6e6b102b02b062ffd libvirt-daemon-driver-storage-0.10.2.7-5.el6.centos.alt.x86_64.rpm cb11bd484f2a398a6ef8f51ca4be8fcd3b7e1dc9f6f5d40c42c3660ef6fab64f libvirt-daemon-driver-xen-0.10.2.7-5.el6.centos.alt.x86_64.rpm 6a34432c436854170cbe65dbbb3f6e78d57f465a5aa4e3fc811c90828a22248a libvirt-daemon-kvm-0.10.2.7-5.el6.centos.alt.x86_64.rpm 5435b04ce095707590604c605efc7081add030fdc4cda4cd2d9e9a7ddabff14f libvirt-daemon-lxc-0.10.2.7-5.el6.centos.alt.x86_64.rpm 2720783b080c0f0809f5dd691f1ddf6153f5ab49239755a755442b53e1ab3931 libvirt-daemon-xen-0.10.2.7-5.el6.centos.alt.x86_64.rpm b6f5ca6c43793349637ff1d3e97f80f7f8da043416825994ed77b929e6bd42a8 libvirt-debuginfo-0.10.2.7-5.el6.centos.alt.x86_64.rpm 40b77f7b5f40b11f1a5540b4e6541a0c91307c2edc86c01fd1b2cbcddd5b641c libvirt-devel-0.10.2.7-5.el6.centos.alt.x86_64.rpm db49b06fa7319888c284f89b835a15a98b6df69d192500abcfb225171f34c14e libvirt-docs-0.10.2.7-5.el6.centos.alt.x86_64.rpm 007f450aae85fbdb0fb17b3ecc8634ce9a9df8a0797bfb1aaaf0e9a249e646ac libvirt-lock-sanlock-0.10.2.7-5.el6.centos.alt.x86_64.rpm 3f8c8b63daf807df4f9e87b7d6d2f9582fffb5306dbb4115fd1108fbaa2467e9 libvirt-python-0.10.2.7-5.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- e335d4873b425a939357c642ce18b3c3808990d5491c01122c405805941462ae libvirt-0.10.2.7-5.el6.centos.alt.src.rpm ===================================================== libvirt Changelog info from the SPEC file: * Thu Sep 12 2013 Johnny Hughes <johnny(a)centos.org> - 0.10.2.7-1.el6.centos.alt - upgrade to upstream version 0.10.2.7 - removed patches 400, 401, 402 as they are now rolled in upstream - added patches 403, 404, 405 from libvirt 0.10.2-maint channel - patch 405 addresses CVE-2013-4291 ===================================================== The following Security issues are addressed in this release: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-4291 -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 2 Date: Thu, 12 Sep 2013 09:54:29 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1258 CentOS 6 db4 Update To: centos-announce(a)centos.org Message-ID: <20130912095429.GA44706(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1258 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1258.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 67a2836f2a8c6d1e97781136e9c0045cb1d56ab977748c5943fd1f6f29082777 db4-4.7.25-18.el6_4.i686.rpm 0760af1c325d15f4d516f2df0f883a45552be54bdda03d43aad6cc9c058efe64 db4-cxx-4.7.25-18.el6_4.i686.rpm 542d5b209eb521686313e0ff590da32bfb18093741a4c62770d1bf74057a3797 db4-devel-4.7.25-18.el6_4.i686.rpm 4735c4a4baf9c987e1653d737c7e956280fee60f8139b5e37046c413725ce151 db4-devel-static-4.7.25-18.el6_4.i686.rpm b141dfa3d23ba49c27ee1f74190704c9e9c163ff9b204130f5d44fd00b8665af db4-java-4.7.25-18.el6_4.i686.rpm e2a450559e86c206a6b904a974f9273647d80da9b41d344c93745a6b296ea713 db4-tcl-4.7.25-18.el6_4.i686.rpm 0b57533b905b25a0adbe516e5f414558ee99ece032266427f556345cbc77e976 db4-utils-4.7.25-18.el6_4.i686.rpm x86_64: 67a2836f2a8c6d1e97781136e9c0045cb1d56ab977748c5943fd1f6f29082777 db4-4.7.25-18.el6_4.i686.rpm c20b757b750677b0e4a6201c8d07018f73d7e9727f1e38279b7791d7b864e001 db4-4.7.25-18.el6_4.x86_64.rpm 0760af1c325d15f4d516f2df0f883a45552be54bdda03d43aad6cc9c058efe64 db4-cxx-4.7.25-18.el6_4.i686.rpm 9a6fa0aa011b507c070f22ecc8d3263440b8c7a2a0f2c960fbdb1a79da05feed db4-cxx-4.7.25-18.el6_4.x86_64.rpm 542d5b209eb521686313e0ff590da32bfb18093741a4c62770d1bf74057a3797 db4-devel-4.7.25-18.el6_4.i686.rpm 0ec064a5d5c9072f4eced859047a5c5d83ef2a8e6ed8b64fdfef666af27b8d44 db4-devel-4.7.25-18.el6_4.x86_64.rpm a0b25d41abb50d33372da01ea86b9bc4a3c003f7a1fd7850564ff6aa69d010be db4-devel-static-4.7.25-18.el6_4.x86_64.rpm 9422f93b34674b69bfb47caa0f4e5dad71eaf6c6602f1ea9b293dcf9d45b2a43 db4-java-4.7.25-18.el6_4.x86_64.rpm 17cb9a1b9011bd67c5b804ebd075d7a63795501513908bd8e86987fc09efe1b1 db4-tcl-4.7.25-18.el6_4.x86_64.rpm df8127814837682c890dc6f4da79f35b66f0574462722663db60d0d6bc0c24ca db4-utils-4.7.25-18.el6_4.x86_64.rpm Source: 8216704a0e530259d6a227c4b13f5e3df5f6dc4ae1872fd14c5902db972cc7e6 db4-4.7.25-18.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 12 Sep 2013 13:40:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1259 CentOS 6 ipmitool FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130912134024.GA4014(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1259 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1259.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2267fa0eb54642d8bbef3878082298e9034e85e6f4a0175c36b8b9724b06f253 ipmitool-1.8.11-16.el6.i686.rpm x86_64: 18ea430c5ea87df96a094e86a638ca372e9a481a84b60098d840ab746701735f ipmitool-1.8.11-16.el6.x86_64.rpm Source: 6aa3837c17957eed1bc295a8335be5a7362f15bef0732178b8ee88d77ca5536e ipmitool-1.8.11-16.el6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 8 ***********************************************

1 0

Apple movie trailers on Centos6/Firefox
by Fred Smith 13 Sep '13

13 Sep '13

Hi all! Once again, Apple has messed with their trailers/website such that I can no longer play their trailers on Centos 6 (note that it still works fine on my two Fedora machines, F17 and F19, without any special settings. on Centos, I've long ago found that by setting the user agent to certain values I could make it work, but now that no longer helps. when I try to view a trailer all I get is a "download Quicktime" page. When I was running C5, I used mplayer plugin to do the video and it worked fine. after installing C6, I discovered that Totem also worked without the need to mess with mplayer installation. then all of a sudden, a couple weeks ago, it stopped working. at the same time, the choices they offered changed, so now they only offer "automatic", "480p" or "720p". this link is to one I can still play: http://trailers.apple.com/trailers/independent/elemental/ and this is a newer one I cannot: http://trailers.apple.com/trailers/disney/monstersuniversity/ I am (and have been) using the User Agent Switcher plugin for firefox (for several years) to make this all work, and until recently it has. Using that plugin, I find either of these settings has worked: useragent description="Quicktime 7.6.2" useragent="QuickTime/7.6.2 (qtver=7.6.2;os=Windows NT 5.1 Service Pack 3)" appcodename="Mozilla" appname="Netscape" appversion="5.0 (X11)" platform="Linux x86_64" vendor="" vendorsub="" or: useragent description="Google chrome" useragent="Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/535.19 (KHTML,like Gecko) Chrome/18.0.1025.168 Safari/535.19" appcodename="Mozilla" appname="Netscape" appversion="5.0 (X11)" platform="Linux x86_64" vendor="" vendorsub="" I'd appreciate hints on how to once again do a end-run around Apple's attempts to fence me out. Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "And he will be called Wonderful Counselor, Mighty God, Everlasting Father, Prince of Peace. Of the increase of his government there will be no end. He will reign on David's throne and over his kingdom, establishing and upholding it with justice and righteousness from that time on and forever." ------------------------------- Isaiah 9:7 (niv) ------------------------------

2 2

CentOS Dojo and drinks, London on the 13th Sept, 2013
by Karanbir Singh 13 Sep '13

13 Sep '13

hi Guys, On the 13th Sept 2013, we will be hosting a CentOS Dojo in London, UK; hosted by ITV ( http://www.itv.com/ ) at their Waterloo offices. Details of the venue are on the wiki page at : http://wiki.centos.org/Events/Dojo/London2013 As with the other Dojo's things start off at 9:30am and we have : * Stefan Cocora talking about the Deploument pipeline at ITV * Justin Clift talking about GlusterFS, getting started and management * Lester Wade talking about Eucalyptus to build your inhouse AWS clone * Robin Bowes talking about provisioning with TheForeman * Felipe Franciosi talking about Virtualised Storage and performance considerations * Mark Sutton talking about going from 0 to hero with FreeIPA Its going to be a great day, with lots of technical talks, so do come along and be a part of the event. Registrations are open now at https://centosdojolondon2013.eventbrite.co.uk/ and as before, the cost is to cover some of the expenses that we incur. After the Dojo, we will decamp to a local pub for beer and conversations, sponsored by Coreix ( http://www.coreix.net/ ) who are covering the first few drinks for everyone! URLs: http://wiki.centos.org/Events/Dojo/London2013 for details and https://centosdojolondon2013.eventbrite.co.uk/ for the registration page. Regards, -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh GnuPG Key : http://www.karan.org/publickey.asc

1 2

Queries usb installer / live usb
by Rajagopal Swaminathan 13 Sep '13

13 Sep '13

Greetings, I am trying to prepare 1. installer usb using iso with (centos minimal + custom rpm) 2. a Live usb using (centos minimal + custom rpm) I do not have any information of the configuration of target system beforehand -- especially the storage devices. Could be two or more and may a dvd-rw. Unknown 1. How does one specify the path for kickstart file in the syslinux.cfg which is in the usb given that device ? 2. where should the kickstart file be located - inside isolinux directory or above it? 3. If we just put ks=ks.cfg where should ks.config be located? TIA -- Regards, Rajagopal

4 6

Tk font problem with CentOS 6
by Glenn Eychaner 12 Sep '13

12 Sep '13

I'm having an odd problem which I can't seem to find the answer to. I have recently upgraded from CentOS 5 to CentOS 6 (using a fresh install and migrate). However, I have a bunch of Tk widgets that use font names like "12x24" and "5x7", etc. Under CentOS 5 (Tk 8.4), this worked fine; however, under CentOS 6 (Tk 8.5), this does not seem to work properly; it does not find the fonts and reverts to a (pretty, but wrong) default font. I have verified using xlsfonts, xdpyfont, etc. that the fonts exist; for example, "12x24" is apparently now an alias for: -Sony-Fixed-Medium-R-Normal--24-170-100-100-C-120-ISO8859-1 and if I specify this full name in Tk, it works fine. What am I doing wrong here, or did the enhanced font support in Tk 8.5 subtly break fonts using an "WxH" designation? -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0

Anyone has experience with OpenVAS and the Atomicorp repository
by Patrick Bervoets 12 Sep '13

12 Sep '13

I was looking for a vulnerability scanner and found OpenVAS. Does anyone has experiences with that scanner? And with the Atomicorp repository? (the OpenVAS website refers to that repo) Thanks Patrick

3 2

CentOS-announce Digest, Vol 103, Issue 7
by centos-announce-request＠centos.org 12 Sep '13

12 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:X009 Xen4CentOS kernel Update (Johnny Hughes) 2. CESA-2013:X010 Important Xen4CentOS xen Security Update (Johnny Hughes) 3. CEBA-2013:1257 CentOS 6 mdadm Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Sep 2013 19:43:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:X009 Xen4CentOS kernel Update To: centos-announce(a)centos.org Message-ID: <20130911194352.GA35272(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X009 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 3c4339bbaad89af1a37fae19d251d64a275133ac5bbe55c2043a5a083c3a18ef e1000e-2.4.14-3.4.61.2.el6.centos.alt.x86_64.rpm a0e1d97efb4ef0e7541ba7defd0eb03a2ef88ccefb00a5b95c2ce8ebaf09d921 kernel-3.4.61-9.el6.centos.alt.x86_64.rpm 178d3497e1b3999c7bb7d656c5a028d238bc4c28ea1b7dfc7b5f62d9d68ca486 kernel-devel-3.4.61-9.el6.centos.alt.x86_64.rpm fb86c44231b15287004278f94f942881a1ac9ef099aaf029e9d666770238aba7 kernel-doc-3.4.61-9.el6.centos.alt.noarch.rpm 231ab097023e63b207ed1056097187eb1bb5b51a8f878f4e044e318029c16562 kernel-firmware-3.4.61-9.el6.centos.alt.noarch.rpm af065e15e9ca4f1868723eb8621eddd2cf4bcc4edeaa3019656fb5d3d2ff646c kernel-headers-3.4.61-9.el6.centos.alt.x86_64.rpm e3191270c09e672a028f269de7d69ca955a0e3573f361e20e7f6c225362e8583 perf-3.4.61-9.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 26f273c2f34e9d5eb0f4d9ccba1e581c98150a4e55a91adba7684959e7bbc907 e1000e-2.4.14-3.4.61.2.el6.centos.alt.src.rpm 19e041f2db65ddacc00ff4bb4c4ea92f25390194a598e54057f5a167fe3a8632 kernel-3.4.61-9.el6.centos.alt.src.rpm ===================================================== Kernel Changelog info from the SPEC file: * Wed Sep 11 2013 Johnny Hughes <johnny(a)centos.org> 3.4.61-9 - upgrade to upstream 3.4.61 - added patch 133 to build docs/noarch (centos bug 6654) * Fri Aug 30 2013 Johnny Hughes <johnny(a)centos.org> 3.4.60-9 - upgrade top upstream 3.4.60 e1000e Changelog info from the SPEC file: * Wed Sep 11 2013 Johnny Hughes <johnny(a)centos.org> - * 2.4.14-3.4.61.2.el6.centos.alt - built against new 3.4.61 kernel * Fri Aug 30 2013 Johnny Hughes <johnny(a)centos.org> - * 2.4.14-3.4.60.2.el6.centos.alt - built against new 3.4.60 kernel ===================================================== The following kernel.org changelog entries are applicable since the last kernel update: https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.4.60 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.4.61 ===================================================== The following bugs have been addressed in this release: http://bugs.centos.org/view.php?id=6654 -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 2 Date: Wed, 11 Sep 2013 19:52:27 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:X010 Important Xen4CentOS xen Security Update To: centos-announce(a)centos.org Message-ID: <20130911195227.GA35376(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:X010 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 05d3190c22913d97ce3adc12a3f83af3f3d03c62a74a921ce22a27c02d82baf9 xen-4.2.3-23.el6.centos.alt.x86_64.rpm ec2489569c37249078cf9793e5380d999c8b7b9fab27e4bd244188f56659f00b xen-devel-4.2.3-23.el6.centos.alt.x86_64.rpm 3eebd63bbaf7eb351d9155a8f9e77a61d2663b86b671a59d9bf2be114c95d28f xen-doc-4.2.3-23.el6.centos.alt.x86_64.rpm 9b11bb5f1301c180c9baf3c650353d4ca9d4c4c936bfa0247837af435382d34c xen-hypervisor-4.2.3-23.el6.centos.alt.x86_64.rpm a99e4906d30d021fa46483888090971c680d40f2f056ce73679d5d3d9b3c9a1b xen-libs-4.2.3-23.el6.centos.alt.x86_64.rpm 83bfab3d49a0491efb56f0d38b284039bd4836372d94ea1e075fbdda961abd9c xen-licenses-4.2.3-23.el6.centos.alt.x86_64.rpm 9b0d3f0fe1eb913cd464b69644fc96042d7e9042fce792159b887fbded5e2278 xen-ocaml-4.2.3-23.el6.centos.alt.x86_64.rpm 75caa2fe59e2348b855b6e2275ef523afc552316edc3d7b85b7feae067d6ff49 xen-ocaml-devel-4.2.3-23.el6.centos.alt.x86_64.rpm c0be88bf125014d7a53c9e21047fe80dc79c5eea9cf26f785a568a163782ea1d xen-runtime-4.2.3-23.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 234122619ff186617d80da07618c8b4febbb2eb0029e5b0883104011372e03c8 xen-4.2.3-23.el6.centos.alt.src.rpm ===================================================== xen Changelog info from the SPEC file: * Wed Sep 11 2013 Johnny Hughes <johnny(a)centos.org> - 4.2.3-23.el6.centos - upgraded to upstream 4.2.3 - removed patches 66-75, 92-94, 108-132 as they are now rolled into xen-4.2.3 ===================================================== The following announcement is available from the Xen site for xen-4.2.3 http://blog.xen.org/index.php/2013/09/09/xen-4-2-3-released/ -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 3 Date: Wed, 11 Sep 2013 13:45:13 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1257 CentOS 6 mdadm Update To: centos-announce(a)centos.org Message-ID: <20130911134513.GA10735(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1257 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1257.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c53a8aabefe332403978af888b5c9d85ab54e479ab68491668953595907f62da mdadm-3.2.5-4.el6_4.2.i686.rpm x86_64: 0ff782ef1395635e29ac1a46272f37562571e0fa7a4d0b2c92f8ec2f37b9530f mdadm-3.2.5-4.el6_4.2.x86_64.rpm Source: 17a0b2190fcd239e258121d0ba9175508bbaae96640cb5a4879dcdc2ad4445c0 mdadm-3.2.5-4.el6_4.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 7 ***********************************************

1 0

CentOS at the OpenNebulaConf
by Jaime Melis 11 Sep '13

11 Sep '13

Hello everyone, As you may be aware, we are holding the first OpenNebula Conference [1] in Berlin, this 24-26 September. The conference is the perfect place to learn about practical Cloud Computing, aimed at cloud users, developers, executives and IT managers to help them tackle their computational and business challenges. The goal is to foster fruitful and educational discussions around Cloud Computing and OpenNebula. We think this is of special interests to CentOS users and developers, since many OpenNebula users are also part of the CentOS userbase. There will even be a keynote about CentOS by Karanbir Singh [2] by the name of "CentOS and OpenNebula, a perfect match". Registration closing date is getting closer, so seize the moment and register now [3]! The conferences attendees will be in for a treat: * Keynotes speakers include Daniel Concepción from Produban – Bank Santander Group, Thomas Higon from Akamai, Steven Timm from FermiLab, André von Deetzen from Deutsche Post E-Post, Jordi Farrés from European Space Agency, Karanbir Singh from CentOS Project, and Ignacio M. Llorente and Rubén S. Montero from the OpenNebula Project. * The talks are organized in three tracks about user experiences and case studies, integration with other cloud tools, and interoperability and HPC clouds and include speakers from leading organizations like CloudWeavers, Terradue, NetWays, INRIA, BBC, inovex, AGS Group, Hedera, NetOpenServices, KTH, CESNET or CESCA. * The Hands-on Tutorial will show how to build, configure and operate your own OpenNebula cloud. * The Hacking and Open Space Sessions will provide an opportunity to discuss burning ideas, and meet face to face to discuss development. * The Lightning Talks will provide an opportunity to present new projects, products, features, integrations, experiences, use cases, collaboration invitations, quick tips or demonstrations. This session is an opportunity for ideas to get the attention they deserve. What's not to like? See you all at Berlin! The OpenNebula Team [1] http://opennebulaconf.com/ [2] http://opennebulaconf.com/schedule/keynote-vi-2/ [3] http://opennebulaconf.com/registration/ -- Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin, 24-26 September, 2013 -- Jaime Melis Project Engineer OpenNebula - The Open Source Toolkit for Cloud Computing www.OpenNebula.org | jmelis(a)opennebula.org

1 0

CentOS-announce Digest, Vol 103, Issue 6
by centos-announce-request＠centos.org 11 Sep '13

11 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1222 CentOS 6 krb5 Update (Karanbir Singh) 2. CEBA-2013:1246 CentOS 6 samba Update (Karanbir Singh) 3. CEBA-2013:1254 CentOS 6 xmlrpc-c FASTTRACK Update (Karanbir Singh) 4. CEBA-2013:1255 CentOS 6 dhcp Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Sep 2013 07:45:17 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1222 CentOS 6 krb5 Update To: centos-announce(a)centos.org Message-ID: <20130910074517.GA56180(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1222 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1222.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e68ecf40c06a774841683f9797d4becd64ddb426b68a52782db54b7fb9eedae5 krb5-devel-1.10.3-10.el6_4.6.i686.rpm b3f465af5df386b4e0366b51cdf9ee768fb97d40f63092ab8d6ae0fbc6a9d709 krb5-libs-1.10.3-10.el6_4.6.i686.rpm e74902cf02213d98a4515ed482b3fb67f7cf2ca4e44d1f43b7f5cf934d148260 krb5-pkinit-openssl-1.10.3-10.el6_4.6.i686.rpm c6730b2f1fe6782a7fddb8d44b1526f233afae12c455285d824579b3a3f06bcf krb5-server-1.10.3-10.el6_4.6.i686.rpm 40e949974f2da781f55c939aed0279399b2cdcfb6636698706dc80d7896b113e krb5-server-ldap-1.10.3-10.el6_4.6.i686.rpm 1cbe8ec811a8690004526c4c74b5cc34943acd8f947395ca6cea87572a9cf685 krb5-workstation-1.10.3-10.el6_4.6.i686.rpm x86_64: e68ecf40c06a774841683f9797d4becd64ddb426b68a52782db54b7fb9eedae5 krb5-devel-1.10.3-10.el6_4.6.i686.rpm 487206d4e51a417244d51c2840a378426029238921ea882e2736ef3b76e3be26 krb5-devel-1.10.3-10.el6_4.6.x86_64.rpm b3f465af5df386b4e0366b51cdf9ee768fb97d40f63092ab8d6ae0fbc6a9d709 krb5-libs-1.10.3-10.el6_4.6.i686.rpm 4741d69f694c61056d57d1d8d212d82490a19c6c87c3ecccdb6e84e08527e519 krb5-libs-1.10.3-10.el6_4.6.x86_64.rpm ac7c4dd07a096e15c9c8b24d93d8d43d8aa473838e7cfc3b49a6f7cafd4f120f krb5-pkinit-openssl-1.10.3-10.el6_4.6.x86_64.rpm f4b2cb907ffc26c6ff26adbd73e04fdaa53d3a89adb934a9a1bab5fc30b85bf8 krb5-server-1.10.3-10.el6_4.6.x86_64.rpm 40e949974f2da781f55c939aed0279399b2cdcfb6636698706dc80d7896b113e krb5-server-ldap-1.10.3-10.el6_4.6.i686.rpm 92a2b9c46ebcfd4e854e226020a987e0e434c6b81a5dc2119bf2907a310cdb9a krb5-server-ldap-1.10.3-10.el6_4.6.x86_64.rpm 17f24b577ea4bf9938ca5cea1650ace131ee51a91d73601b9f7ee326bb6f9b07 krb5-workstation-1.10.3-10.el6_4.6.x86_64.rpm Source: 6d0e6828b70d4e601639b8037c6f875adc3c9fac971a70b88e4cf3d136295052 krb5-1.10.3-10.el6_4.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 10 Sep 2013 12:47:24 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1246 CentOS 6 samba Update To: centos-announce(a)centos.org Message-ID: <20130910124724.GA15355(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1246 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1246.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 70fd5ca9351a43fcc02c21b833935e626fff3f6302da1de152942c32f23e3c55 libsmbclient-3.6.9-151.el6_4.1.i686.rpm 283b2cfe77a9af17e65dd2ece222bbe9d8376e4aa71fd740e1a200092d09596d libsmbclient-devel-3.6.9-151.el6_4.1.i686.rpm ba7c93566208aaef8be76b979e9c4a2aed9f9829c5a733eaf3717ec12237ff82 samba-3.6.9-151.el6_4.1.i686.rpm ce0372185f8a8cae30f645dff1ac39b2a864abe99eca06ae86efc5a7ff2d2e79 samba-client-3.6.9-151.el6_4.1.i686.rpm 8293460188c16240b85381098667cf9ec1d38cef0fafe776ba45ce0f4a6bee0f samba-common-3.6.9-151.el6_4.1.i686.rpm db857250a3d2b224ee577e59f277906c7ed887e704627660c0aae09b8dc6d0ec samba-doc-3.6.9-151.el6_4.1.i686.rpm f11c847fa16a3b84189967481a88a8c85ecadd94c44dd36b315be78382a555ad samba-domainjoin-gui-3.6.9-151.el6_4.1.i686.rpm 3590a5a9cc4cbada08437bf134f3e27bdb831de17e4e03260ab75042f04be296 samba-swat-3.6.9-151.el6_4.1.i686.rpm c799b14c3ba725f0c45a8d6771c940dfb8e8315ff2c9e3c96012027390c1b025 samba-winbind-3.6.9-151.el6_4.1.i686.rpm 24e2998ce0b8568912a685d5422993045f6fa56a8a85150a748a8ddb91bb7a4c samba-winbind-clients-3.6.9-151.el6_4.1.i686.rpm fa2f4ba388ce171d1acf93c84e873dcaf95e8a15b154a21cc57eaeb91af6f91e samba-winbind-devel-3.6.9-151.el6_4.1.i686.rpm d82eb142a09561249f1a0d571f97698e698360b505f46d5bfedfd374575b6d03 samba-winbind-krb5-locator-3.6.9-151.el6_4.1.i686.rpm x86_64: 70fd5ca9351a43fcc02c21b833935e626fff3f6302da1de152942c32f23e3c55 libsmbclient-3.6.9-151.el6_4.1.i686.rpm 27372863a44b032584fd0bd70df5f10405e8e896be07601e1ca76beb71333a9f libsmbclient-3.6.9-151.el6_4.1.x86_64.rpm 283b2cfe77a9af17e65dd2ece222bbe9d8376e4aa71fd740e1a200092d09596d libsmbclient-devel-3.6.9-151.el6_4.1.i686.rpm b9857381599653108b7211ddcb62b834e44c72e3e69f96dd198d5cfe1d8769a4 libsmbclient-devel-3.6.9-151.el6_4.1.x86_64.rpm 9508b38bef79e79c73b2c54adac19cb17aedca245d9e771cc61940a3ea42a0a7 samba-3.6.9-151.el6_4.1.x86_64.rpm 786c6921baeebc926e3b29b54308c4741362e77016a7fe9657122bf17f66cd84 samba-client-3.6.9-151.el6_4.1.x86_64.rpm 8293460188c16240b85381098667cf9ec1d38cef0fafe776ba45ce0f4a6bee0f samba-common-3.6.9-151.el6_4.1.i686.rpm 217fd98d983a64af65b0d74da5a24b85cb7c5169bc1dc55f0180abd133c03baf samba-common-3.6.9-151.el6_4.1.x86_64.rpm 5d18413279bc77fa23aed2e6a0e4a19334ba32fb6ac1bd6ff37c15ed0acfd845 samba-doc-3.6.9-151.el6_4.1.x86_64.rpm 164cf6d702f6c6b2ced416f7f63d8eac5e29a756c5adcba9237f51f9cfc4cf37 samba-domainjoin-gui-3.6.9-151.el6_4.1.x86_64.rpm 8276c57b7ebd5e4a068f5e7689e4007661f06e12eba524510ed00f33f60bf0fe samba-swat-3.6.9-151.el6_4.1.x86_64.rpm 83e1aa2c9306239c1b384d1ad94dde57c18011914775baa83e6615465c690daf samba-winbind-3.6.9-151.el6_4.1.x86_64.rpm 24e2998ce0b8568912a685d5422993045f6fa56a8a85150a748a8ddb91bb7a4c samba-winbind-clients-3.6.9-151.el6_4.1.i686.rpm 414d8a8ead479b54c5f9ef6e073e6e1a06f746a9877393ffa873366eabaacffb samba-winbind-clients-3.6.9-151.el6_4.1.x86_64.rpm fa2f4ba388ce171d1acf93c84e873dcaf95e8a15b154a21cc57eaeb91af6f91e samba-winbind-devel-3.6.9-151.el6_4.1.i686.rpm 1febdf86c6054b5f7d3211173a299d796ad60bc795e66622fe7a1954af8b1e96 samba-winbind-devel-3.6.9-151.el6_4.1.x86_64.rpm ee7721977f8763a3bb2ac06c837eb680be9dad0da444a304e1ec26849a0869a8 samba-winbind-krb5-locator-3.6.9-151.el6_4.1.x86_64.rpm Source: f54290d2fb30be842548747effd22dc0f32db48c3767f2f320e564a73fa2c154 samba-3.6.9-151.el6_4.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 11 Sep 2013 10:45:01 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1254 CentOS 6 xmlrpc-c FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130911104501.GA52833(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1254 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1254.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ae50ba85f96f974bce9dd6557964a5a7757e49bf8cff2995b9f7476fc269c06b xmlrpc-c-1.16.24-1210.1840.el6.i686.rpm 4b26ab395dda7e90b0b9b8acdf88c6dec075ca4991c8463b89228b7c6a74b81a xmlrpc-c-apps-1.16.24-1210.1840.el6.i686.rpm 62d4897f7e967008e0bbc48eefc7f83b6a8a8c74e243a25023624200c59e479b xmlrpc-c-c++-1.16.24-1210.1840.el6.i686.rpm 7916723fa7dd5082d435506b24bd5ea9dc16e373f70ac921f5ab9c7d73381e56 xmlrpc-c-client-1.16.24-1210.1840.el6.i686.rpm 3ebfbb3ef1d734c3799ce2ec4d4fe6673ccd3ea86630001ffa59df933ae0b0d0 xmlrpc-c-client++-1.16.24-1210.1840.el6.i686.rpm 71d62ebd45e5dfb4564d4653c377f8c5bb398634f058d503d422ac1233d5ef1b xmlrpc-c-devel-1.16.24-1210.1840.el6.i686.rpm x86_64: ae50ba85f96f974bce9dd6557964a5a7757e49bf8cff2995b9f7476fc269c06b xmlrpc-c-1.16.24-1210.1840.el6.i686.rpm dcaa65fe21c637aae3fca8960db4f2bf783d0dfb312081b8825c515b303aff33 xmlrpc-c-1.16.24-1210.1840.el6.x86_64.rpm 26f13e584c28baaa3ca8c8fc0fe55e382c9ed7338c63e626b365f648b44eb852 xmlrpc-c-apps-1.16.24-1210.1840.el6.x86_64.rpm 62d4897f7e967008e0bbc48eefc7f83b6a8a8c74e243a25023624200c59e479b xmlrpc-c-c++-1.16.24-1210.1840.el6.i686.rpm 0b448ca6b61d2be7ccf30ecc07f855ad5c264677cb2c00e2407c762cc9cf3df9 xmlrpc-c-c++-1.16.24-1210.1840.el6.x86_64.rpm 7916723fa7dd5082d435506b24bd5ea9dc16e373f70ac921f5ab9c7d73381e56 xmlrpc-c-client-1.16.24-1210.1840.el6.i686.rpm 3ebfbb3ef1d734c3799ce2ec4d4fe6673ccd3ea86630001ffa59df933ae0b0d0 xmlrpc-c-client++-1.16.24-1210.1840.el6.i686.rpm be5e3b3ba84c1b8d55791800107303fe1ea1a88bc0e8844b05da08285a7fe97e xmlrpc-c-client-1.16.24-1210.1840.el6.x86_64.rpm 1c90c0d65d88ff6570a314f65dba6e89247dac38c7276bf1ba36013f2de6f8bb xmlrpc-c-client++-1.16.24-1210.1840.el6.x86_64.rpm 71d62ebd45e5dfb4564d4653c377f8c5bb398634f058d503d422ac1233d5ef1b xmlrpc-c-devel-1.16.24-1210.1840.el6.i686.rpm dbcc6b08e4f87a44185f8d5dac5fa284a8af02a58a75efc7270f8e98956756b8 xmlrpc-c-devel-1.16.24-1210.1840.el6.x86_64.rpm Source: fe060f7d28e2b022ff39964a7158f53fbbc893c21ebed9fce4963b0c8e1fa5dc xmlrpc-c-1.16.24-1210.1840.el6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 11 Sep 2013 10:45:55 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1255 CentOS 6 dhcp Update To: centos-announce(a)centos.org Message-ID: <20130911104555.GA53118(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1255 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1255.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 809b45b45693b829d6d2a6cf86e34f0e153253699490d98beef794666c509dce dhclient-4.1.1-34.P1.el6_4.1.i686.rpm 6c784036e065848cf51582dc71b34b2c4b60577d5fd5f413d5c882f81faeac5f dhcp-4.1.1-34.P1.el6_4.1.i686.rpm 0fe8317e863d63d93fd23f7421dd4df23969cf5ea34e088829cfc5b37b5b151a dhcp-common-4.1.1-34.P1.el6_4.1.i686.rpm 0bc2d6e31416e06f0672c7196925138e4feb26230ee7105d824ed059b1e52398 dhcp-devel-4.1.1-34.P1.el6_4.1.i686.rpm x86_64: 8c9ab200426a2c71bed5803528c818bb0f7a152d54229873300e53f11fe8d94c dhclient-4.1.1-34.P1.el6_4.1.x86_64.rpm a7e5d9af0cb6766e8a88ce338d1d0f01f4ebba272e50564fc6c9bcfa4449f878 dhcp-4.1.1-34.P1.el6_4.1.x86_64.rpm 0da541318dd426166f87876fdfe2383a3da87e72333a9f9d1fa78b4ef15d9d51 dhcp-common-4.1.1-34.P1.el6_4.1.x86_64.rpm 0bc2d6e31416e06f0672c7196925138e4feb26230ee7105d824ed059b1e52398 dhcp-devel-4.1.1-34.P1.el6_4.1.i686.rpm 3d18ef54c51e90e89835840c3b19eb6a25fa5d1de8c7fd38151e8cb9ce83c8e0 dhcp-devel-4.1.1-34.P1.el6_4.1.x86_64.rpm Source: 2ae80b549078acb2d7ae9775f9364eadbbf67adfaa81b7e05cee788e73c95a6c dhcp-4.1.1-34.P1.el6_4.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 6 ***********************************************

1 0

Crashing Server [_spin_unlock_irqrestore+0x17/0x20]
by Adam Tauno Williams 11 Sep '13

11 Sep '13

I have a CentOS server that after the latest round of updates has begun crashing [dump, reboot] 2.6.32-358.18.1.el6.centos.plus.x86_64 The dmesg dump in /var/crash looks like the following; does anyone recognize that? <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>Bluetooth: Core ver 2.15 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>device eth0 entered promiscuous mode <7>eth0: no IPv6 routers present <4>int3: 0000 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0/local_cpus <4>CPU 0 <4>Modules linked in: bluetooth rfkill autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 microcode serio_raw i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support e1000e usb_storage ext4 jbd2 mbcache raid1 sr_mod cdrom sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> <4>Pid: 1626, comm: irqbalance Not tainted 2.6.32-358.18.1.el6.centos.plus.x86_64 #1 Supermicro X9SCI/X9SCA/X9SCI/X9SCA <4>RIP: 0010:[<ffffffff81c280e7>] [<ffffffff81c280e7>] early_idt_handlers+0xe7/0x140 <4>RSP: 0018:ffff88023ad3fda8 EFLAGS: 00000046 <4>RAX: 0000000000000000 RBX: ffff88023c7f95c0 RCX: 000000005815e3ad <4>RDX: ffff88023c7f962c RSI: 0000000000000246 RDI: 0000000000000246 <4>RBP: ffff88023ad3fdd8 R08: ffff88023cdbb000 R09: 0000000000000000 <4>R10: 0000000000000200 R11: 0000000000000000 R12: ffff88023c7f962c <4>R13: ffff880237e87000 R14: 0000000000000001 R15: 0000000000000246 <4>FS: 00007fc3c2c54720(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>CR2: 00007fc3c2c63000 CR3: 0000000238a4e000 CR4: 00000000000407f0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process irqbalance (pid: 1626, threadinfo ffff88023ad3e000, task ffff880237678ae0) <4>Stack: <4> ffffffff81517e27 0000000000000010 0000000000000246 ffff88023ad3fdd8 <4><d> 0000000000000018 0000000000000246 ffff88023ad3fe28 ffffffff810e33ae <4><d> 0000000000000000 0000002200000008 0000000000000022 0000000000000008 <4>Call Trace: <4> [<ffffffff81517e27>] ? -- Adam Tauno Williams <http://www.whitemiceconsulting.com> System Administrator, OpenGroupware Developer, LPI / CNA Fingerprint 8C08 209A FBE3 C41A DD2F A270 2D17 8FA4 D95E D383

1 0

Re: [CentOS] Help with VMware ESXi manager for CentOS - newbie level
by m.roth＠5-cent.us 11 Sep '13

11 Sep '13

Les Mikesell wrote: > On Thu, Sep 5, 2013 at 10:19 AM, John R Pierce <pierce(a)hogranch.com> wrote: >> On 9/5/2013 3:52 AM, Scott Robbins wrote: >>> At one point, it would work, but not with https. 5.1 and up can have everything managed from the web browser--they're actually dropping the client, I believe, and having you do everything from the browser. With CentOS, (as opposed to Fedora) one needed to add some keyboard trickery to get the arrow keys to work in the web console though. >> >> but VMware ESXi 5.x is very crippled in its free configuration, with draconian limits on how much RAM is allowed before you have to start paying for licenses. > > I'd look at it the other way and say that the free version of ESXi, the client and the conversion tool is really very nice to give away for free... In many ways it is more convenient to use than KVM and very, very stable. But, I haven't had any trouble getting KVM (or a recent virtualbox) to run the same vmdk images, so you aren't > completely tied to it. I'd also add that the o/p said this was what they used at his job, and I find it highly unlikely that he's going to be able to convince management to move to a VM system that they're not familiar with, esp. when all of his co-workers, and presumably management, run Windows. Given that, I think the answers he needs are how to deal with VMware ESXi as it is. And yes, I'm well aware that ESXi is a modified version of, mmm, is it still RHEL 3, or have they gone up yet? mark

6 9

Errors on NFS server
by Sajesh Singh 10 Sep '13

10 Sep '13

CentOS 6.4 x86_64 Kernel: 2.6.32-358.14.1.el6.x86_64 I have been noticing repeatedly that after a couple of weeks of uptime my NFS server starts to generate the following error: ------------[ cut here ]------------ WARNING: at lib/list_debug.c:26 __list_add+0x6d/0xa0() (Tainted: G W --- ------------ ) Hardware name: ProLiant DL380 G7 list_add corruption. next->prev should be prev (ffff88031930bde8), but was ffff8 803e9401888. (next=ffff8803e9401888). Modules linked in: bridge mptctl mptbase nfsd lockd nfs_acl auth_rpcgss exportfs dlm configfs sunrpc ipmi_devintf cpufreq_ondemand freq_table pcc_cpufreq bondin g 8021q garp stp llc ipv6 power_meter sg microcode serio_raw iTCO_wdt iTCO_vendo r_support hpilo hpwdt bnx2 i7core_edac edac_core shpchp ext4 mbcache jbd2 sd_mod crc_t10dif hpsa radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror d m_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 3269, comm: nfsd Tainted: G W --------------- 2.6.32-358.14.1.el 6.x86_64 #1 Call Trace: [<ffffffff8106e307>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106e3f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffffa01e249f>] ? ext4_mark_iloc_dirty+0x35f/0x5a0 [ext4] [<ffffffff812890fd>] ? __list_add+0x6d/0xa0 [<ffffffffa01eb77f>] ? ext4_orphan_add+0x13f/0x1f0 [ext4] [<ffffffffa01eefbb>] ? ext4_rename+0x58b/0x750 [ext4] [<ffffffff8119009b>] ? vfs_rename+0x3ab/0x440 [<ffffffffa03e3aca>] ? nfsd_rename+0x47a/0x4d0 [nfsd] [<ffffffffa03eb4f1>] ? nfsd3_proc_rename+0xd1/0x1a0 [nfsd] [<ffffffffa03ecb85>] ? decode_fh+0x55/0x80 [nfsd] [<ffffffffa03ecddc>] ? decode_filename+0x1c/0x70 [nfsd] [<ffffffffa03dd43e>] ? nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa033b614>] ? svc_process_common+0x344/0x640 [sunrpc] [<ffffffff81063330>] ? default_wake_function+0x0/0x20 [<ffffffffa033bc50>] ? svc_process+0x110/0x160 [sunrpc] [<ffffffffa03ddb62>] ? nfsd+0xc2/0x160 [nfsd] [<ffffffffa03ddaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81096956>] ? kthread+0x96/0xa0 [<ffffffff8100c0ca>] ? child_rip+0xa/0x20 [<ffffffff810968c0>] ? kthread+0x0/0xa0 [<ffffffff8100c0c0>] ? child_rip+0x0/0x20 ---[ end trace 9af8b68bfc4bdd49 ]--- After a reboot all is okay. Searched, but could not find anything recent that would apply to the errors that I am seeing. Does anyone have a clue as to what could be causing this error? Thank you, Sajesh

1 0

large SCSI RAID, replacing server
by Joseph Spenner 10 Sep '13

10 Sep '13

I have a system running CentOS 6.3, with a SCSI attached RAID: http://www.raidweb.com/index.php/2012-10-24-12-40-09/janus-ii-scsi/2012-10-… For disaster recovery purposes, I want to build up a spare system which could take the place of the server hosting the RAID above. But here's what I see: # fdisk -l /dev/sdc WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 44004.7 GB, 44004691814400 bytes 255 heads, 63 sectors/track, 5349932 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 524288 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. # But here's the partitions I have: # df -k |grep sdc /dev/sdc1 15379809852 8627488256 6596071608 57% /space01 /dev/sdc2 6248052728 905001184 5279574984 15% /space02 /dev/sdc5 8175038780 2418326064 5673659088 30% /space03 /dev/sdc4 6248052728 1444121916 4740454252 24% /space04 /dev/sdc3 6248052728 1886640284 4297935884 31% /space05 # How can I build up a new system to be ready for this existing RAID? Or will the latest/greatest CentOS just know what to do, and allow me to simply copy the /etc/fstab over and respect it? Thanks! Regards, Joseph Spenner ______________________________________________________________________ If life gives you lemons, keep them-- because hey.. free lemons. "♥ Sticker" fixer: http://microflush.org/stuff/stickers/heartFix.html

4 8

resolf.conf lost
by Günther J. Niederwimmer 10 Sep '13

10 Sep '13

Hello. I have a big Problem with centos 6.4 KVM client. After a new start i lost always my resolf.conf and this file is empty, have any a hint why? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer

4 6

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss