- Discuss - lists.centos.org

CentOS6 bind DLV problems
by tony＠softins.co.uk 16 Aug '13

16 Aug '13

I have two CentOS6 boxes, both running Bind as a local resolver, with what appears to me to be the same configuration as each other. I have a problem on one but not the other, to do with DNSSEC Lookaside Validation. On the box with the problem, if I do: host www.bbc.co.uk 127.0.0.1 (for example), it sits there for a while, then gives me a timeout error. I did some tests while running a tcpdump packet capture on udp port 53, and I discovered that bind was fetching the correct answer normally, and then performing a validation query to one of the DLV servers at ISC (e.g. 199.6.0.29, 199.6.0.30, 199.6.1.29 or 199.6.1.30). It was not receiving any reply. After several seconds, it tried another DLV server and again received no reply. A similar test on the other box receives replies from ISC no problem. I have tried disabling iptables on the failing box, but that didn't help. I'm assuming something in the request causes ISC to ignore it. The relevant parts of named.conf are the same on both boxes, and are pretty close to the stock installation from CentOS6: //------------------------------------------------------------- options { listen-on port 53 { any; }; //listen-on-v6 port 53 { ::1; }; listen-on-v6 port 53 { none; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; //allow-query { localhost; }; //allow-recursion { localhost; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; //------------------------------------------------------------- I have compared named.iscdlv.key, named.root.key and named.rfc1912.zones, the they are the same on both systems. The key records stored in /var/named/dynamic are also the same on both. The failing box fails whether allow-query and allow-recursion are commented out or not. I can make it work by commenting out the dnssec lines, but of course that it just disabling the queries to ISC. Can anyone give me any ideas why one box would get DLV replies and the other would not? And hopefully how to fix it! Thanks! Tony -- Tony Mountifield Work: tony(a)softins.co.uk - http://www.softins.co.uk Play: tony(a)mountifield.org - http://tony.mountifield.org

2 2

samba: check password with AD without joining domain?
by Les Mikesell 16 Aug '13

16 Aug '13

Is there a way to get samba to authenticate against an AD without having to join that domain (which needs admin credentials)? I don't want any of the automatic user creation or mapping stuff from winbind, just a password check instead of having to maintain a local password. I can get that effect via kerberos for normal linux logins by using authconfig-tui, checking kerberos, and filling in the domain/kdc details. Local users still have to be added to the linux system, but where the user names match they can authenticate with their domain password. But, samba doesn't work that way. Even though the authconfig program modifies the smb.conf file, it doesn't seem to work without joining the domain. Is it possible to make it just authenticate via kerberos but otherwise use the local account details for the matching user? -- Les Mikesell lesmikesell(a)gmail.com

4 4

yum-plugin-priorities
by Timothy Murphy 16 Aug '13

16 Aug '13

If I add priority=1 to [updates] in CentOS-Base.repo when I run "sudo yum update" I get the warning 66 packages excluded due to repository priority protections This does not seem to have any adverse effect, but what exactly does it mean? -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 School of Mathematics, Trinity College, Dublin 2, Ireland

5 6

Re: [CentOS] Red Hat CEO: Go Ahead, Copy Our Software
by Les Mikesell 15 Aug '13

15 Aug '13

On Thu, Aug 15, 2013 at 4:49 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > are you really that dumb? > "take the free version away" -> come on and explain how this works for GPL software Exactly, explain where the GPL distinguishes between what restrictions you can add to binaries vs source components. > Redhat *does not* sell the software and code > they sell the service and support contracts So, what about redistribution of copies? > why are you not simply use a operating system without code from Redhat and shut up? > Windows and Apple OSX as example would free you from Redhat and CentOS > come on, move forward if you are pissed of Redhat for no reason! I could use debian, but then I'd have to learn to type apt-get instead of rpm. I'd prefer to continue using the commands that Red Hat baited us with. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Re: [CentOS] Red Hat CEO: Go Ahead, Copy Our Software
by Les Mikesell 15 Aug '13

15 Aug '13

On Thu, Aug 15, 2013 at 4:08 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > >> How about the real history, where Red Hat took a bunch of software >> developed by others, published the barely-working stuff with horrible >> bugs (read the changelogs if you disagree....), then accepted >> contributed debugging, fixes and improvements from the users until it >> was good enough to charge for, then they cut off access even to the >> people who had helped make it usable. And CentOS helps fix that >> problem > > so what > > what about live and let live? What about bait and switch? > remove anything delevoped by RH paied employes in the last 10 years > from the ecosystem and you stay here naked and helpless and most > other distributions too in case of modern and rock solid software Remove the stuff contributed by others and what would still work at all? > GCC and the kernel are only two but importnat pieces where > Redhat invested a lot of time and money over the years > > so whats your problem? I guess I'd rather have seen the contributed work go to a distribution that didn't develop a community with a free version and then after accepting their work, take the free version away. CentOS still gives the same effect, so why didn't they just continue to allow redistribution? -- Les Mikesell lesmikesell(a)gmail.com

2 2

back to: kernel: do_IRQ: 2.96 No irq handler for vector (irq -1)
by m.roth＠5-cent.us 15 Aug '13

15 Aug '13

I asked here a week or so ago, and referenced an older bug, but haven't seen any comments. Googling, I see others asking about the same. Datum: *every* one I've found is like this: they're all HP DL580's or DL380's, or such. This is being used for heavy-duty scientific computing. Does anyone know if it *will* it seriously affect throughput speed if I turn off irqbalance? It's running 6.4, btw. mark

3 3

Mirror failure
by Phil Dobbin 15 Aug '13

15 Aug '13

Hi, all. I was getting: `http://mirror01.th.ifl.net/epel/6/x86_64/repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'mirror01.th.ifl.net'" Trying other mirror. ftp://ftp.mirrorservice.org/sites/dl.fedoraproject.org/pub/epel/6/x86_64/re…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.mirrorservice.org'" Trying other mirror. ftp://ftp.fedora.is/pub/epel/6/x86_64/repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.fedora.is'" Trying other mirror. ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/epel/6/x86_64/repodata…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.funet.fi'" Trying other mirror. ftp://mirrors.fedoraproject.org.uk/dl.fedoraproject.org/pub/epel/6/x86_64/r…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'mirrors.fedoraproject.org.uk'" Trying other mirror. Error: failure: repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try. You could try using --skip-broken to work around the problem` every time I ran `sudo yum update'. This happened on Fedora 17 also. I've had to switch both machines to Ubuntu because I need working machines. I've Googled this extensively & changed my nameservers, commented out relevant lines in the configs, etc, etc but no luck so far. Ubuntu works fine & I have no network problems (two HP ProCurves 2124s working normally over the rest of the network: 17 machines). Is there a workaround for this as I need a working CentOS box. Any help appreciated. Cheers, Phil... -- currently (ab)using CentOS 5.9 & 6.4, Debian Squeeze & Wheezy, Fedora Beefy, Spherical & That Damn Cat, Lubuntu 12.10, OS X Snow Leopard & Tiger, Ubuntu Precise, Quantal & Raring GnuGPG Key : http://phildobbin.org/publickey.asc

5 11

convert webpage to image
by Carl T. Miller 14 Aug '13

14 Aug '13

What is the easiest way to convert a webpage into a jpg or png file? I've seen several programs that can do various conversions, but nothing open source that can do it in a single conversion. Just wondering if anyone on the list has suggestions for something I can put into a script to convert a webpage into a file I can use with my screensaver. c

14 18

Intel e1000e driver bug and 82574L controller
by Glenn Eychaner 14 Aug '13

14 Aug '13

One of the more promising solutions I'm looking at for my dual-ethernet dual-monitor workstation contains an Intel 82574L Ethernet controller. I found a LOT of postings regarding a bug in the driver for this controller: http://www.doxer.org/learn-linux/resolved-intel-e1000e-driver-bug-on-82574l… https://bugzilla.redhat.com/show_bug.cgi?id=632650 but there isn't any clear indication as to whether the bug has been resolved in mainline CentOS 6.4 or not. Has this bug been resolved? -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

3 2

Re: [CentOS] qemu-kvm package?
by Dave Johansen 14 Aug '13

14 Aug '13

On Fri, Aug 9, 2013 at 8:15 AM, lists-centos <replies-lists-c9y6-centos(a)listmail.innovate.net> wrote: > > > > ------------ Original Message ------------ > > Date: Friday, August 09, 2013 08:04:08 AM -0700 > > From: Dave Johansen <davejohansen(a)gmail.com> > > To: CentOS mailing list <centos(a)centos.org> > > Cc: > > Subject: [CentOS] qemu-kvm package? > > > > I just did a clean net install of CentOS 6.4 and when I run > > virt-manager it says that qemu-kvm is missing, but when I try to > > install it with yum it says that there isn't a package with that > > name. Is something wrong with my configuration? Or what is causing > > this package to appear as not available? Thanks, > > Dave > > Is this install on a 32-bit machine? > > It's there for 64-bit, but I don't see it for 32-bit. > > > - Richard It's a 32-bit install.

7 14

Mirror problem
by Phil Dobbin 14 Aug '13

14 Aug '13

Hi, all. I was getting: `http://mirror01.th.ifl.net/epel/6/x86_64/repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'mirror01.th.ifl.net'" Trying other mirror. ftp://ftp.mirrorservice.org/sites/dl.fedoraproject.org/pub/epel/6/x86_64/re…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.mirrorservice.org'" Trying other mirror. ftp://ftp.fedora.is/pub/epel/6/x86_64/repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.fedora.is'" Trying other mirror. ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/epel/6/x86_64/repodata…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'ftp.funet.fi'" Trying other mirror. ftp://mirrors.fedoraproject.org.uk/dl.fedoraproject.org/pub/epel/6/x86_64/r…: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'mirrors.fedoraproject.org.uk'" Trying other mirror. Error: failure: repodata/c60f7c3ee6f9a4902d5ce9dd181a84ca684bba1a1df1c612702c7c6760a04645-filelists.sqlite.bz2 from epel: [Errno 256] No more mirrors to try. You could try using --skip-broken to work around the problem` every time I ran `sudo yum update'. This happened on Fedora 17 also. I've had to switch both machines to Ubuntu because I need working machines. I've Googled this extensively & changed my nameservers, commented out relevant lines in the configs, etc, etc but no luck so far. Ubuntu works fine & I have no network problems (two HP ProCurves 2124s working normally over the rest of the network: 17 machines). Is there a workaround for this as I need a working CentOS box. Any help appreciated. Cheers, Phil... -- currently (ab)using CentOS 5.9 & 6.4, Debian Squeeze & Wheezy, Fedora Beefy, Spherical & That Damn Cat, Lubuntu 12.10, OS X Snow Leopard & Tiger, Ubuntu Precise, Quantal & Raring GnuGPG Key : http://phildobbin.org/publickey.asc

1 0

CentOS-announce Digest, Vol 102, Issue 9
by centos-announce-request＠centos.org 14 Aug '13

14 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1153 CentOS 6 cpuspeed Update (Karanbir Singh) 2. CESA-2013:1156 Moderate CentOS 6 httpd Update (Karanbir Singh) 3. CESA-2013:1156 Moderate CentOS 5 httpd Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 13 Aug 2013 12:53:34 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1153 CentOS 6 cpuspeed Update To: centos-announce(a)centos.org Message-ID: <20130813125334.GA3758(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1153 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1153.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 60ce4c1e77da8d0927b5f49f6ab2614b71a117ea5a37513156e51d59fa26f019 cpuspeed-1.5-20.el6_4.i686.rpm x86_64: 1d18e6f750c4fe9397928d2ccc706fc78a18d9fa5b5c7ebe8cd12354ced069eb cpuspeed-1.5-20.el6_4.x86_64.rpm Source: 39db598458cfe3dd0b73a6f12df5c70b11a86921d32ca6430e1c1e1a9f44190c cpuspeed-1.5-20.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 13 Aug 2013 17:32:49 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1156 Moderate CentOS 6 httpd Update To: centos-announce(a)centos.org Message-ID: <20130813173249.GA24825(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1156 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1156.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0605e2fdccc0687b318da8e7ce050daf84fccf6c04aa0a2d011ae1dd4ea27236 httpd-2.2.15-29.el6.centos.i686.rpm 6e6c49c2d04f554dbf869a0535bc7f7fb2651bf640df0a3117136849e96a6c59 httpd-devel-2.2.15-29.el6.centos.i686.rpm 29e01bfa8e96f545471775d8d16d1569353216d64f694f969d67a00ea50e2122 httpd-manual-2.2.15-29.el6.centos.noarch.rpm 46436ec1417524ad16bde1747e97d436c56f51c77e6d61f0b5f5a62b735ffa9a httpd-tools-2.2.15-29.el6.centos.i686.rpm a5136d55b73fca1598c51e30a8f51a0fe6d5502d704e5c01402b1d96dfed575d mod_ssl-2.2.15-29.el6.centos.i686.rpm x86_64: 46c20d90c7eb41b1161336fa6c311f4e486aa40f4ab13effa4823b0c0479c699 httpd-2.2.15-29.el6.centos.x86_64.rpm 6e6c49c2d04f554dbf869a0535bc7f7fb2651bf640df0a3117136849e96a6c59 httpd-devel-2.2.15-29.el6.centos.i686.rpm 0241f1ee678aa149ee0f7b7906855ca0d8a4810c0913d675e19abe1cbb85ed5d httpd-devel-2.2.15-29.el6.centos.x86_64.rpm 29e01bfa8e96f545471775d8d16d1569353216d64f694f969d67a00ea50e2122 httpd-manual-2.2.15-29.el6.centos.noarch.rpm 493d6a7c36b1f7324a015e1eed543be0920bbf133a62c86658989dc6db8c1c4f httpd-tools-2.2.15-29.el6.centos.x86_64.rpm ace9fe721b8068514429f69d9b5b43e67a49ac9f6ae07f29321da45b20b53229 mod_ssl-2.2.15-29.el6.centos.x86_64.rpm Source: 4398f3e3ca27a280eb7918d8557a44bd8ae780fb2cda771c5697a80d35e9ce06 httpd-2.2.15-29.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 13 Aug 2013 17:46:50 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1156 Moderate CentOS 5 httpd Update To: centos-announce(a)centos.org Message-ID: <20130813174650.GA24928(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1156 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1156.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9095e24adf7bf346fb0de388f0473562185ed2da28cb8e676ab75e7d892c1012 httpd-2.2.3-82.el5.centos.i386.rpm e103cb19b70335b3cf6384ca16eaa71c9898e27c1fda855a12a72d41e2dac134 httpd-devel-2.2.3-82.el5.centos.i386.rpm ec0376ea5404e0c26f7736416e803afaad771874e6e48e55ae4dac49d9dd1ee1 httpd-manual-2.2.3-82.el5.centos.i386.rpm f6932d0507d8781f7db4b0e58943a3cd7aa481f012865a6aca9867e2a826650d mod_ssl-2.2.3-82.el5.centos.i386.rpm x86_64: b02c83cc08e7930fd879015fcf49c4f9339aa790125cefd9bbf7e113e734f237 httpd-2.2.3-82.el5.centos.x86_64.rpm e103cb19b70335b3cf6384ca16eaa71c9898e27c1fda855a12a72d41e2dac134 httpd-devel-2.2.3-82.el5.centos.i386.rpm 4bc674862be85fc70a0e30ef58ac5295a3e5c5e4c6a3c5dd1b50dba3552030bc httpd-devel-2.2.3-82.el5.centos.x86_64.rpm a00ca65f33630b1f6d6f7d245e1fbf8333145bd75bf9ccc1a841a2d5d4e506c9 httpd-manual-2.2.3-82.el5.centos.x86_64.rpm c284b2fd580d6868ca5208bcd9ce386ade93accd638769d96bfbc432b6ae120f mod_ssl-2.2.3-82.el5.centos.x86_64.rpm Source: 114325c9db4892a62ece1c052edd4b9db73cb2957cf0b8c903c08dfe6750d320 httpd-2.2.3-82.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 9 ***********************************************

1 0

5.9, GNOKII, SMS and Huawei [ E160G | E176 ]
by Jobst Schmalenbach 14 Aug '13

14 Aug '13

Hi I want to setup a SMS system for Nagios on a 5.9 box. I read in a blog that the two modems Huawei [ E160G | E176 ] work with 6.3. Anybody any experience with those modems and do they work with 5.9? Are there any other devices that are better/recommended? Thanks Jobst -- 186,262 miles/second : Not just a good idea, it's the LAW. | |0| | Jobst Schmalenbach, jobst(a)barrett.com.au, General Manager | | |0| Barrett Consulting Group P/L & The Meditation Room P/L |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia

2 2

3TB External USB Drive isn't recognized
by james 13 Aug '13

13 Aug '13

We have a 3TB external USB drive that I am trying to attach to some CentOS5 servers. I have tried an older Dell PE1950 and a newer R310 but neither one seems to be able to read the drive. It works no problem on windows servers/workstations and I was able to format with NTFS. I know there are different methods for formatting large disks but this one doesn't even seem to show up as a /dev/ device. I supplied the dmesg output I see when I plug in the device. Is this a limitation of CentOS5? Do I need some additional package / driver / update? usb 2-1.2: new high speed USB device using ehci_hcd and address 5 usb 2-1.2: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: ASMT Model: 2105 Rev: 0 Type: Direct-Access ANSI SCSI revision: 06 sde : very big device. try to use READ CAPACITY(16). sde : READ CAPACITY(16) failed. sde : status=0, message=00, host=5, driver=00 sde : use 0xffffffff as device size SCSI device sde: 4294967296 512-byte hdwr sectors (2199023 MB) sde: Write Protect is off sde: Mode Sense: 43 00 00 00 sde: assuming drive cache: write through sde : very big device. try to use READ CAPACITY(16). sde : READ CAPACITY(16) failed. sde : status=0, message=00, host=5, driver=00 sde : use 0xffffffff as device size SCSI device sde: 4294967296 512-byte hdwr sectors (2199023 MB) sde: Write Protect is off sde: Mode Sense: 43 00 00 00 sde: assuming drive cache: write through sde:<6>usb 2-1.2: reset high speed USB device using ehci_hcd and address 5 usb 2-1.2: reset high speed USB device using ehci_hcd and address 5 usb 2-1.2: reset high speed USB device using ehci_hcd and address 5 usb 2-1.2: reset high speed USB device using ehci_hcd and address 5 sd 7:0:0:0: SCSI error: return code = 0x00070000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00070000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 usb 2-1.2: USB disconnect, address 5 sd 7:0:0:0: SCSI error: return code = 0x00070000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 Dev sde: unable to read RDB block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 sd 7:0:0:0: SCSI error: return code = 0x00010000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 unable to read partition table sd 7:0:0:0: Attached scsi disk sde sd 7:0:0:0: Attached scsi generic sg7 type 0 usb-storage: device scan complete usb 2-1.2: new high speed USB device using ehci_hcd and address 6 usb 2-1.2: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning Vendor: ASMT Model: 2105 Rev: 0 Type: Direct-Access ANSI SCSI revision: 06 sde : very big device. try to use READ CAPACITY(16). sde : READ CAPACITY(16) failed. sde : status=0, message=00, host=5, driver=00 sde : use 0xffffffff as device size SCSI device sde: 4294967296 512-byte hdwr sectors (2199023 MB) sde: Write Protect is off sde: Mode Sense: 43 00 00 00 sde: assuming drive cache: write through sde : very big device. try to use READ CAPACITY(16). sde : READ CAPACITY(16) failed. sde : status=0, message=00, host=5, driver=00 sde : use 0xffffffff as device size SCSI device sde: 4294967296 512-byte hdwr sectors (2199023 MB) sde: Write Protect is off sde: Mode Sense: 43 00 00 00 sde: assuming drive cache: write through sde:<6>usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 INFO: task usb-stor-scan:26787 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb-stor-scan D ffffffff80150939 0 26787 35 26786 (L-TLB) ffff81005fad5640 0000000000000046 ffff81006427ce78 ffffffff800e4df4 0000000000000086 000000000000000a ffff81000ccfd7a0 ffff810037c1b100 0001039304f5b0b1 000000000000a05c ffff81000ccfd988 0000000300000000 Call Trace: [<ffffffff800e4df4>] blkdev_readpage+0x0/0xf [<ffffffff8006e1d7>] do_gettimeofday+0x40/0x90 [<ffffffff80028b44>] sync_page+0x0/0x43 [<ffffffff800e4df4>] blkdev_readpage+0x0/0xf [<ffffffff800637ea>] io_schedule+0x3f/0x67 [<ffffffff80028b82>] sync_page+0x3e/0x43 [<ffffffff8006392e>] __wait_on_bit_lock+0x36/0x66 [<ffffffff8003fce0>] __lock_page+0x5e/0x64 [<ffffffff800a0b8d>] wake_bit_function+0x0/0x23 [<ffffffff800c67ba>] read_cache_page+0xba/0x110 [<ffffffff8010a685>] read_dev_sector+0x28/0xcf [<ffffffff8010c061>] read_lba+0x49/0xac [<ffffffff800dbba2>] alternate_node_alloc+0x70/0x8c [<ffffffff8010c2f0>] efi_partition+0x99/0x5d4 [<ffffffff880a8917>] :sd_mod:sd_revalidate_disk+0xb74/0xc86 [<ffffffff8010c257>] efi_partition+0x0/0x5d4 [<ffffffff8010ad6c>] rescan_partitions+0x132/0x279 [<ffffffff800e56b0>] do_open+0x231/0x30f [<ffffffff800e589c>] __blkdev_get+0x6a/0x7c [<ffffffff8002d0e8>] wake_up_bit+0x11/0x22 [<ffffffff8010abdd>] register_disk+0x133/0x190 [<ffffffff801479df>] add_disk+0x34/0x3d [<ffffffff880a9492>] :sd_mod:sd_probe+0x2f7/0x355 [<ffffffff80056e02>] netlink_broadcast+0x2a9/0x2f1 [<ffffffff801c7d26>] driver_probe_device+0x52/0xaa [<ffffffff801c7d7e>] __device_attach+0x0/0x5 [<ffffffff801c74d1>] bus_for_each_drv+0x40/0x72 [<ffffffff801c7dd5>] device_attach+0x52/0x5f [<ffffffff801c71d8>] bus_attach_device+0x1a/0x35 [<ffffffff801c6498>] device_add+0x261/0x372 [<ffffffff8807e226>] :scsi_mod:scsi_sysfs_add_sdev+0x35/0x21b [<ffffffff8807c610>] :scsi_mod:scsi_probe_and_add_lun+0x8b1/0x9c9 [<ffffffff8807cab6>] :scsi_mod:scsi_alloc_target+0x268/0x329 [<ffffffff8807ccba>] :scsi_mod:__scsi_scan_target+0xc3/0x5c7 [<ffffffff8006342b>] wait_for_completion_interruptible_timeout+0xdf/0xfb [<ffffffff8008d0ad>] default_wake_function+0x0/0xe [<ffffffff8807d203>] :scsi_mod:scsi_scan_channel+0x45/0x70 [<ffffffff8807d2ee>] :scsi_mod:scsi_scan_host_selected+0xc0/0xfa [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4 [<ffffffff885c049f>] :usb_storage:usb_stor_scan_thread+0x12e/0x156 [<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e [<ffffffff885c0371>] :usb_storage:usb_stor_scan_thread+0x0/0x156 [<ffffffff8003296e>] kthread+0xfe/0x132 [<ffffffff8005dfb1>] child_rip+0xa/0x11 [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4 [<ffffffff80032870>] kthread+0x0/0x132 [<ffffffff8005dfa7>] child_rip+0x0/0x11 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 sd 8:0:0:0: timing out command, waited 180s sd 8:0:0:0: SCSI error: return code = 0x06050000 end_request: I/O error, dev sde, sector 0 Buffer I/O error on device sde, logical block 0 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6 usb 2-1.2: reset high speed USB device using ehci_hcd and address 6

9 12

Macromedia Flash data (compressed), version 9
by Michael Hennebry 13 Aug '13

13 Aug '13

I've copied some files from the firefox cache. According to file, they are Macromedia Flash data (compressed), version 9. How do I play them locally? I saw them from a remote site through firefox, but I cannot seem to play them locally. neither mplayer nor vlc seems to work. Pointing firefox at them didn't work either. Any ideas? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "On Monday, I'm gonna have to tell my kindergarten class, whom I teach not to run with scissors, that my fiance ran me through with a broadsword." -- Lily

4 5

Disable Kernel Screen Blanker
by Mark LaPierre 13 Aug '13

13 Aug '13

Hey Y'all, I'm trying to turn off the kernel screen blanker that shuts off the video after about 10 minutes of inactivity at the keyboard. After extensive googling I've found two ways to *NOT* do it. In my home .xinitrc setterm -blank 0 -powersave off -powerdown 0 xset s off In /etc/rc.local /usr/bin/setterm -powersave off -blank 0 I've tried both to no effect. Of course I've turned off the screen saver in the Gnome desktop. How do I stop this machine from blanking the screen with no activity? I want video full time! I know someone is going to ask, "Why do you want to do that?", so to save you from asking. 1. I'm setting up a kiosk that customers can use interactively. It's not very inviting to passers by when the screen is blank. 2. I want to watch movies and Skype without having to poke the mouse all the time. 3. My monitor is very unhappy when the video signal is cut off. 4. My wife is very unhappy when the screen goes blank. 5. Insert your reason here. I just want it to stop. ;-) -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

3 3

Motherboard and chipset compatibility
by Glenn Eychaner 13 Aug '13

13 Aug '13

So, having returned from a month's vacation, I'm back to work on attempting to build a set of small form factor CentOS compatible computers. I've really tried to do my homework, but this doesn't appear (at first glance) to be at all easy. It's not made easier by the fact that I have to get it right the first time (and I haven't built a PC in a decade); the time and money cost of shipping anything to and from my remote location in Chile means I can't afford to waste time buying and returning things. First question: does anyone have any experience with the Jetway NF9E-Q77 or ZOTAC Z77ITX-A-E motherboards? Having struck out on Intel Q77 or Z77-based SFF motherboards (the DQ77** series is completely out of stock everywhere, and the DZ77** series is ATX only), I have found a couple of Mini-ITX systems based on these two motherboards. Second question: Where can I get information about which Intel chipsets (Z77 vs Z87 vs Q77 vs C602 vs ...geez, there are a LOT of chipsets, as evidenced by http://www.supermicro.com/support/faqs/os.cfm) are supported by CentOS 6 / RHEL 6? I have not been able to find this information on either the Intel, RedHat, or CentOS web sites. Third (more general) question: My requirements are (I believe) modest: * 1U short-depth rackmount chassis OR Mini-ITX small-footprint chassis * Dual GbE network ports * Dual 1920x1200 monitor display * One SSD drive * 32-bit CentOS 6.4 compatible. It's the combination of the first, third, and fifth requirements that really seems to get me hung up. I've found plenty of 1U server systems (such as SuperMicro), but none of them support dual displays. (Some of them have a PCIe16x riser card that could conceivably accomodate a separate graphics card, assuming I could find one that fits; I have Emails in to various tech supports to inquire about this. I've found LOTS of 2U solutions, thanks, but only have 1U of available rack.) As far as Linux support goes, the RHEL Hardware List has thus far been pretty useless (much of the hardware on it is obsolete or discontinued), and most manufacturers' web sites have been equally useless. (One exception being ASUS, which has a Linux-compatibility list at http://www.asus.com/websites/global/aboutasus/OS/Linux.pdf SuperMicro has a very nice list referenced above, but none of their small form factor motherboards support dual displays AFAICT; I have found nothing useful at Intel's site.) Does anyone have any resources they'd like to point me to? Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

7 8

CentOS-announce Digest, Vol 102, Issue 8
by centos-announce-request＠centos.org 13 Aug '13

13 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1150 CentOS 6 net-snmp Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 12 Aug 2013 15:29:24 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1150 CentOS 6 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20130812152924.GA37081(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1150 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1150.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 606041c5872c2b5a5a8ca488305158e78465f9d5a3b6776aa553e8c6c92b9d25 net-snmp-5.5-44.el6_4.4.i686.rpm d8e18d917a5a81ecf05e60ae369b56af25c3f9be4f0fc031dff3f25cebcc496d net-snmp-devel-5.5-44.el6_4.4.i686.rpm f7a5987f31139adc57b2bb7f9253f1743e744c994878f819dd7c4f579342199c net-snmp-libs-5.5-44.el6_4.4.i686.rpm 61b99be57ebb9cd9c35b58e23f571e6ae69202e035b1c61b8f6fe3b6d9e6710d net-snmp-perl-5.5-44.el6_4.4.i686.rpm 9401fc52b8d693cbf3fb6d00d0f5f159d4b16bff3993e9d3eab2a01ef7646a51 net-snmp-python-5.5-44.el6_4.4.i686.rpm b77afc1467b1a6905fe19e6526f19806bcba2c53131d441beed0fbad841dbc09 net-snmp-utils-5.5-44.el6_4.4.i686.rpm x86_64: 672a34dc2c1157f8d6fda74ca9147c8b6ca1b038c3314722a85e8c7ce4a9da7c net-snmp-5.5-44.el6_4.4.x86_64.rpm d8e18d917a5a81ecf05e60ae369b56af25c3f9be4f0fc031dff3f25cebcc496d net-snmp-devel-5.5-44.el6_4.4.i686.rpm e5f0568ccf34534f3a4d287f7dfbe671b92e36c08e4cc58ec98fb79b8efeffc1 net-snmp-devel-5.5-44.el6_4.4.x86_64.rpm f7a5987f31139adc57b2bb7f9253f1743e744c994878f819dd7c4f579342199c net-snmp-libs-5.5-44.el6_4.4.i686.rpm 0525e208baa1e9b179d2007006e1820fd29e5a5ccfec7193c4e043f69cf76b19 net-snmp-libs-5.5-44.el6_4.4.x86_64.rpm 910a2f63360e54a6068477abf40f2060e4020c4042d980ebf7fa1760325354b9 net-snmp-perl-5.5-44.el6_4.4.x86_64.rpm 977617aa242b83fb53a57493118d02dae66ef8e60f475888bfa23c5ed8b02191 net-snmp-python-5.5-44.el6_4.4.x86_64.rpm f018a0239911aa3606374fa3d97358227dea691e584a5cf2897b573dd18d5325 net-snmp-utils-5.5-44.el6_4.4.x86_64.rpm Source: 5d5de79fa0097916bcc39a39091e27f8b48cca9633c6eb52891627bba3db9652 net-snmp-5.5-44.el6_4.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 8 ***********************************************

1 0

Re: [CentOS] Motherboard and chipset compatibility
by Glenn Eychaner 12 Aug '13

12 Aug '13

> > Since the reqirements are (relatively) modest (except those two), I was > > hoping to squeeze something in. > > how about an ultrasmall form factor desktop, such as the Dell Optiplex > 7010 USFF ? those have dual displayport outputs (requires $7 optional > video output panel), and are 24x6.5x24cm I didn't even know that the Optiplex 7010 was CentOS compatible (though someone may have mentioned it in my previous thread); it is not on the RedHat Hardware List, not does Dell's web site go out of its way to mention it. Again, how does one find this kind of thing out? There has to be a better solution than 3 days of web searches, Emails to tech support, and forum posts. In addition, the USFF Optiplex seems to be limited to a Core i3 processor and a mere 2GB of memory, which while acceptable is not optimal (and worse than some other solutions I'm looking at). And for everyone suggesting KVMs, VMs, SSH, or other solutions...this is a telescope operations system, so none of those are really appropriate to the task, I'm afraid. I really want direct monitor/keyboard/mouse connections (and yes, I keep a hotspare warmed up at all times in case of a critical failure, and have had to use it on more than one occasion). And I'm sorry my postings don't seem to thread right in the archives. I subscribe to the Digest form orf the list and am compiling these replies using the web archives. Anyway, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

2 1

Dell R515 with PERC H700 - JBOD?
by Joseph Spenner 12 Aug '13

12 Aug '13

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0. This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a system where I can remove and replace the drives regularly, while the system is on/running. I do this on a SuperMicro, but wanted to migrate this server to a Dell. I tried disabling the RAID in the BIOS, but then the installer never sees the disks. Any ideas would be great. Thanks! Regards, Joseph Spenner ______________________________________________________________________ If life gives you lemons, keep them-- because hey.. free lemons. "♥ Sticker" fixer: http://microflush.org/stuff/stickers/heartFix.html

2 2

Re: [CentOS] Motherboard and chipset compatibility
by Glenn Eychaner 12 Aug '13

12 Aug '13

John R Pierce wrote: > On 8/12/2013 9:14 AM, Glenn Eychaner wrote: > > * 1U short-depth rackmount chassis OR Mini-ITX small-footprint chassis > > * Dual 1920x1200 monitor display > > those two requirements together are unusual. most rackmount 1U systems > are headless, except a basic VGA for initial configuration. > dual display is generally found on a desktop system. I agree. In this case, the floor is not the best environment for the equipment, the adjacent rack has only 1U of short-depth rack space available, and the desktop is already crowded with keyboards and monitors. Since the reqirements are (relatively) modest (except those two), I was hoping to squeeze something in. Looks like I'm out of luck, and buying another full tower to hold a motherboard, a disk drive, and one expansion card. Sigh. -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

6 5

Re: [CentOS] Motherboard and chipset compatibility
by Glenn Eychaner 12 Aug '13

12 Aug '13

m.roth at 5-cent.us wrote: > Now, about what you're looking to build - you say that you want 1U, and > mention rackspace: in my experience, rackmounts are a *lot* larger than a > pizza box, so I'm a little confused at the requirements you're building > for. The rack is already full; I only get that 1U of space by removing a spare part to another location, and unfortunately, I have a depth limit due to the power distribution module on the rack rear. These computers are replacing tower PCs that sit on the floor under a desk in a rather hostile environment, so I'd like to move them to either the desktop or the adjacent rack, but have limited space in either location (1U of short-depth rack or about room for a miniITX box on the desk). -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

3 2

bonding interface instable
by Leon Fauster 12 Aug '13

12 Aug '13

Hi all, i recently found that some frontend servers (Centos6) show: kernel: bonding: bond0: link status definitely up for interface eth2. kernel: bonding: bond0: link status definitely down for interface eth2, disabling it kernel: bonding: bond0: link status definitely up for interface eth2. On some days frequently and on others none. But there is no hw failure or similar. $ cat /sys/devices/virtual/net/bond0/bonding/{mode,arp_validate} active-backup 1 active 1 $ cat /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 BOOTPROTO=static IPADDR=MYIP NETMASK=MYMASK NETWORK=MYNET BROADCAST=MYCAST ONBOOT=yes TYPE=Ethernet BONDING_OPTS="mode=1 arp_interval=500 arp_validate=1 arp_ip_target=GATEIP,GATE2IP primary=eth0" $ cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 (primary_reselect always) Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 500 ARP IP target/s (n.n.n.n form): GATEIP, GATE2IP Slave Interface: eth0 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 31 Permanent HW addr: MACADDR Slave queue ID: 0 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: MACADDR Slave queue ID: 0 Device module tg3: $ cat /sys/module/tg3/version 3.124 Any ideas or same experiences out there? Thanks LF

1 0

compile paramaters
by Rita 11 Aug '13

11 Aug '13

hi, I am trying to find out what compile flags and environment variables were used when compiling the python package. Is there an easy way of figuring this out? perhaps a website which shows the RPM specs? -- --- Get your facts first, then you can distort them as you please.--

3 5

Openssl vulnerability - SSL/ TLS Renegotion Handshakes
by Anumeha Prasad 11 Aug '13

11 Aug '13

Hi, I'm currently at CentOS 5.8. I'm using openssl version openssl-0.9.8e-22.el5. The following vulnerability was reported by a Nessus security scan: "SSL/ TLS Renegotion Handshakes MiTm Plaintext Data Injection" As per following link, Redhat has introduced openssl-0.9.8m which fixes this specific issue: https://access.redhat.com/site/articles/20490#Updates_adding_RFC_5746_suppo… I created rpm for openssl-0.9.8m using tarball and when I tried to install it, I got "libssl.so.6()(64bit) is needed by <rpm name>" errors which would be solved by installing openssl098e rpm. This rpm is a part of CentOS 6 and so I can't install it. Do we have openssl-0.9.8m or higher rpm available for CentOS 5? Or any other way I could resolve errors "libssl.so.6()(64bit) is needed by <rpm name>"? Or any suggestions on the mentioned "SSL/ TLS Renegotion Handshakes" vulnerability? Thanks, Anumeha

6 8

Why libnetfilter_queue is missing from CentOS, but available in, Fedora?
by Robert Moskowitz 10 Aug '13

10 Aug '13

I am asking this on behalf of the HIPL developers; http://infrahip.hiit.fi/ https://launchpad.net/hipl They have been working on getting their code consistant to the new libnetfilter architecture. Finally have Fedora 18 and 19 available, but have hit a stumbling block with Centos 6. They tell me they are not finding libnetfilter_queue. Here is their message to me: On 08/08/2013 02:03 PM, Miika Komu wrote: > Hi Robert, > > a bug fix exists in the trunk, thanks to Juhani. Do you know why > libnetfilter_queue is not available for CentOS? Do you know any CentOS > maintainers? > > On 13/03/13 15:00, Robert Moskowitz wrote: >> Here you go! >> >> >> -------- Original Message -------- >> Subject: Re: libipq and Fedora 18 >> Date: Wed, 13 Mar 2013 06:45:13 -0600 >> From: Michal Jaegermann <michal(a)harddata.com> >> Reply-To: For testing and quality assurance of Fedora releases >> <test(a)lists.fedoraproject.org> >> To: For testing and quality assurance of Fedora releases >> <test(a)lists.fedoraproject.org> >> >> >> >> On Wed, Mar 13, 2013 at 08:07:14AM -0400, Robert Moskowitz wrote: >>> I am working with the HIPL project: http://infrahip.net/ and I am >>> the creator of the HIP protocol (see RFC 5201 and ID 5201-bis). >>> >>> On past Fedora releases, HIPL has relied on libipq, but the package >>> manager cannot find this in F18. >> That is what you can find, for example, in Wikipedia: "libipq is a >> development library for iptables userspace packet queuing. Libipq >> provides an API for communicating with ip_queue. >> >> Libipq has been deprecated in favour of the newer libnetfilter_queue in >> Linux kernel-2.6.14 onwards." >> >> See also >> http://www.netfilter.org/projects/libnetfilter_queue/index.html >> >> If you will try: >> >> yum provides '*/libnetfilter_queue.so*' >> >> then packages libnetfilter_queue-1.0.2-1.fc18 and >> libnetfilter_queue-devel-1.0.2-1.fc18 will show up. >> >> Michal >> -- >> test mailing list >> test(a)lists.fedoraproject.org >> To unsubscribe: >> https://admin.fedoraproject.org/mailman/listinfo/test >> >> >>

5 5

Autofs - can you mount only certain home dirs?
by Les Mikesell 09 Aug '13

09 Aug '13

Does autofs take completed control of directories mentioned in auto.master? The examples with /home show that you can specify individual users instead of * and &, but even then it seems to take over the whole /home level so you can't see or add local subdirs. I have a small group of users/hosts where I would like to at least temporarily mix/match who is automounted or not. -- Les Mikesell lesmikesell(a)gmail.com

3 3

What FileSystems for large stores and very very large stores?
by Eliezer Croitoru 09 Aug '13

09 Aug '13

I was learning about the different FS exists. I was working on systems that ReiserFS was the star but since there is no longer support from the creator there are other consolidations to be done. I want to ask about couple FS options. EXT4 which is amazing for one node but for more it's another story. I have heard about GFS2 and GlusterFS and read the docs and official materials from RH on them. In the RH docs it states the EXT4 limit files per directory is 65k and I had a directory which was pretty loaded with files and I am unsure exactly what was the size but I am almost sure it was larger the 65k files per directory. I was considering using GlusterFS for a very large storage system with NFS front. I am still unsure EXT4 should or shouldn't be able to handle more then 16TB since the linux kernel ext4 docs at: https://www.kernel.org/doc/Documentation/filesystems/ext4.txt in section 2.1 it states: * ability to use filesystems > 16TB (e2fsprogs support not available yet). so can I use it or not?? if there are no tools to handle this size then I cannot trust it. I want to create a storage with more then 16TB based on GlusterFS since it allows me to use 2-3 rings FS which will allow me to put the storage in a form of: 1 client -> HA NFS servers -> GlusterFS cluster. it seems to more that GlusterFS is a better choice then Swift since RH do provide support for it. Every response will be appreciated. Thanks, Eliezer

7 13

MP3 Tagger
by Mark LaPierre 09 Aug '13

09 Aug '13

Is there any good tagger for CentOS 6? -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

5 5

qemu-kvm package?
by Dave Johansen 09 Aug '13

09 Aug '13

I just did a clean net install of CentOS 6.4 and when I run virt-manager it says that qemu-kvm is missing, but when I try to install it with yum it says that there isn't a package with that name. Is something wrong with my configuration? Or what is causing this package to appear as not available? Thanks, Dave

3 2

CentOS-announce Digest, Vol 102, Issue 7
by centos-announce-request＠centos.org 09 Aug '13

09 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1142 Important CentOS 6 thunderbird Update (Karanbir Singh) 2. CEBA-2013:1148 CentOS 6 talk FASTTRACK Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 9 Aug 2013 07:30:59 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1142 Important CentOS 6 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20130809073059.GA30364(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1142 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1142.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a3bffc1a95511fe06c09eea91aa6b7613e151c217ed4114c2b321ccdb27afc0e thunderbird-17.0.8-5.el6.centos.i686.rpm x86_64: 3d1d21625f80c337c4bbce97675c1ead883579aea4186908b6ce11fc26ffcbac thunderbird-17.0.8-5.el6.centos.x86_64.rpm Source: 0f2ba7e315682bd634019c48982b5a8e25f2ff05889344db1cad7ed61382314f thunderbird-17.0.8-5.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 9 Aug 2013 11:15:22 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1148 CentOS 6 talk FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130809111522.GA51119(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1148 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1148.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1c2d22271c9e88b0dd59bebaa9aff60be9da50e5742cd6304e13396be003d828 talk-0.17-36.el6.i686.rpm 39e50f422f835911c2bda7b5b5e9bf8adc11cb4f18139360adadb9578bcd8f1d talk-server-0.17-36.el6.i686.rpm x86_64: c74c947d9388242d4ce8e20c28d865de38dfa66df6e2565b6beabce2687c9bbd talk-0.17-36.el6.x86_64.rpm 265ebc517e11f51b320ab7155b220b54dbdae7789431e9e1865f2fe1e37171f8 talk-server-0.17-36.el6.x86_64.rpm Source: 1cedfb0ab97bdd5634ac7727d5a15523b52e227a58abf2f26349d0e7f8553f80 talk-0.17-36.el6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 7 ***********************************************

1 0

pppd + rp-pppoe: /sbin/ifup-local when ADSL re-up?
by Mihamina Rakotomandimby 09 Aug '13

09 Aug '13

Hi all, I set up an ADSL connection using rp-pppoe/pppoe-setup. The setting is to persist the connection, so that when the link goes down, it's re-up'd by pppd. The interface is "ppp0" and it appears "/sbin/ifup-local" is not called when re-uppping the ADSL link. It is a problem for me, as I have some routing tables which get cleared from the routes "via ppp0" when the ADSL is down and I need the routes to be added when "ppp0" is back. What's your suggestion in order to either launch "/sbin/ifup-local"or launch a script when "pppd" gets "ppp0" back? -- RMA.

1 0

Cisco DPC3825 - Web Server
by Fidel Dominguez 08 Aug '13

08 Aug '13

Friends I have the following Cisco DPC3825. Enter the settings and put in the DMZ web server that I have, but when I try to access it from another network I get the error code 504, which is the gateway problem. I can access the server via ssh without problems. Research on google for 3 days and can not find the solution to my problem. This router is different compared to the ones I had. The IP to access my router via web from the local network is 192.168.100.1, and the IP of the server I put in the DMZ is 192.168.0.17. No other information could you provide to clarify my problem. Sincerely Fidel Dominguez

3 5

forcing linux kernel 3 to recognize cdrom as hdX
by Oguz Yilmaz 08 Aug '13

08 Aug '13

Hello, I have a problem with older version of anaconda linux installer. I have upgraded kernel in my distro, but, when this anaconda boot with new 3.4.52 kernel, can NOT find cdrom. As far as I understand, this is because the new kernel recognize cd drive as srX, scdX instead of older hdX with 2.6.18. At the moment I can not upgrade anaconda and forced this kernel to recognize it as before. Are there any kernel command line argument, kernel config or something else for kernel 3.4.52 to recognize this cdrom as hdX? Best Regards, -- Oguz YILMAZ

5 7

Re: [CentOS] repoforge :: is it still active?
by Adrian Sevcenco 08 Aug '13

08 Aug '13

On 08/07/2013 08:27 PM, Reindl Harald wrote: > > > Am 07.08.2013 19:12, schrieb Adrian Sevcenco: >> On 08/07/2013 06:41 PM, Patrick Flaherty wrote: >>> They off up their SRC rpms right? Grab the .spec file and have a go at >> i already did this (for el6 - see below) .. i have the rpms, but at this >> moment would be for me too time consuming to learn how to make a repo > > what do you need to learn? > > * yum install createrepo > * createrepo /path/to/your/existing/rpms/ > * let point any httpd/ftpd server point to /path/to/your/rpms/ > * copy a .repo-file from /etc/yum.repos.d/ and modify it for your needs > > this does not take longer than 10 minutes at all thanks a lot!!! easier than i thought! Adrian

2 1

CentOS-announce Digest, Vol 102, Issue 6
by centos-announce-request＠centos.org 08 Aug '13

08 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1140 Critical CentOS 6 firefox Update (Karanbir Singh) 2. CESA-2013:1142 Important CentOS 5 thunderbird Update (Karanbir Singh) 3. CESA-2013:1144 Moderate CentOS 6 nss, nss-util, nss-softokn, and nspr Update (Karanbir Singh) 4. CEBA-2013:1146 CentOS 6 nss-pam-ldapd Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Aug 2013 12:23:59 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1140 Critical CentOS 6 firefox Update To: centos-announce(a)centos.org Message-ID: <20130807122359.GA59387(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1140 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1140.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d606c6e6aec2aaf56e7dcf58fb90e08e10987186df4570e3fc39c27eb493cf08 firefox-17.0.8-1.el6.centos.i686.rpm f79b361189050266adf06e690280790980056bc8825824dbf2be4b015fc80040 xulrunner-17.0.8-3.el6.centos.i686.rpm 8df0546cb9fb6949a02ff39969f31ee6c9096537af871bb7f09ea25dbc33d5d0 xulrunner-devel-17.0.8-3.el6.centos.i686.rpm x86_64: d606c6e6aec2aaf56e7dcf58fb90e08e10987186df4570e3fc39c27eb493cf08 firefox-17.0.8-1.el6.centos.i686.rpm 766377ffe748104e1e85f0c4445742e72c0ef1bb25eba2e2f511bcde5878d99c firefox-17.0.8-1.el6.centos.x86_64.rpm f79b361189050266adf06e690280790980056bc8825824dbf2be4b015fc80040 xulrunner-17.0.8-3.el6.centos.i686.rpm ab5d8ca811a832e5518c3e577b217b95ba97e026f5de332cb9d807ee8f46d128 xulrunner-17.0.8-3.el6.centos.x86_64.rpm 8df0546cb9fb6949a02ff39969f31ee6c9096537af871bb7f09ea25dbc33d5d0 xulrunner-devel-17.0.8-3.el6.centos.i686.rpm f11a4a684c88fc91bec55d11656b7da167f560f24bc26419a16f62205f4d09b4 xulrunner-devel-17.0.8-3.el6.centos.x86_64.rpm Source: 430bb851de108431f8a4ba41dfe09775e5778e123ccd745e2b11d6759908e938 firefox-17.0.8-1.el6.centos.src.rpm b2eb74f446f3f783143cbde5323ef83068c4cacacdeb876e28af4c2e00016ace xulrunner-17.0.8-3.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 7 Aug 2013 20:14:12 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1142 Important CentOS 5 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20130807201412.GA7820(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1142 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1142.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0f42911c5588336dc341f9eedb47111e15d902c89812e4c9509981ecd524a964 thunderbird-17.0.8-5.el5.centos.i386.rpm x86_64: 925fa770e515eb877055fe1977d2e81fadbd8e1b8abad1d6c6e39eddeb9db502 thunderbird-17.0.8-5.el5.centos.x86_64.rpm Source: 8fa005546557d77f963333d95cfc42c9c1160d23f60e1c2ab2a8a962c82fdbcf thunderbird-17.0.8-5.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 7 Aug 2013 22:22:50 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1144 Moderate CentOS 6 nss, nss-util, nss-softokn, and nspr Update To: centos-announce(a)centos.org Message-ID: <20130807222250.GA20860(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1144 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1144.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0f58d15d6a0701a653cdb2edb28c4637177a28205d4125a75b058401eb701638 nspr-4.9.5-2.el6_4.i686.rpm 4bfc730889575fbfd3d9e381b7795a932ef4e5934980373cb25e07a37345da86 nspr-devel-4.9.5-2.el6_4.i686.rpm 7ae168ed04f50160d9ad74573546c2fd6283604f105c84b54e47f2fc85030a64 nss-3.14.3-4.el6_4.i686.rpm a2dcfab2e26fc6ea3315e8edc350e4d187ee696953df9e8c2897de3520a4335e nss-devel-3.14.3-4.el6_4.i686.rpm 433800763e54157c6a9d53df5522bff0624927697418ad84505d3d1dac67c158 nss-pkcs11-devel-3.14.3-4.el6_4.i686.rpm 18802405fe1c3aab26686261dae07eff2b87ca29e352d5dc167eae85d038e305 nss-softokn-3.14.3-3.el6_4.i686.rpm 2a667eebdb02342f05998f0f90f8241625ae2860b6152f3f4f6a50813ba2af98 nss-softokn-devel-3.14.3-3.el6_4.i686.rpm b3de628d33e606d08fc20371f8f31d2cde47894c0ff710d48dfadadfac436b19 nss-softokn-freebl-3.14.3-3.el6_4.i686.rpm 605febe4e77275e1e2f82c572c96edff7eb3bdddba6babb40ba611b7c6a982a2 nss-softokn-freebl-devel-3.14.3-3.el6_4.i686.rpm c8aa5e227980f3de0ef1e9f84376d489c4d0c0a78b9f19ddf78dd17a41ac3864 nss-sysinit-3.14.3-4.el6_4.i686.rpm 6b8a1e7f4b154929665b6906bf0ec5cab0986b6baa9745615ae08dc0cb331c88 nss-tools-3.14.3-4.el6_4.i686.rpm dba88322b701b9cdd9d40943cd7f8ed5b00d4e9a789c46ba3e8ed0000184af44 nss-util-3.14.3-3.el6_4.i686.rpm af95b7bcb6e5927034d3b8a304fbda7442c4311538651dcc3c6a7c62d5636762 nss-util-devel-3.14.3-3.el6_4.i686.rpm x86_64: 0f58d15d6a0701a653cdb2edb28c4637177a28205d4125a75b058401eb701638 nspr-4.9.5-2.el6_4.i686.rpm 57d33fdbd3ab84c918960216edcab613bf584d603f0a494d6e3e5ec91a330416 nspr-4.9.5-2.el6_4.x86_64.rpm 4bfc730889575fbfd3d9e381b7795a932ef4e5934980373cb25e07a37345da86 nspr-devel-4.9.5-2.el6_4.i686.rpm 59f0d2d2396a6eb7cb4e9220a20e8dfa5266ea7db576df822f811db7236144f1 nspr-devel-4.9.5-2.el6_4.x86_64.rpm 7ae168ed04f50160d9ad74573546c2fd6283604f105c84b54e47f2fc85030a64 nss-3.14.3-4.el6_4.i686.rpm 2ff15881fafd6fa527870e68505c3ba8c9b2bf1a85aa7a552105acd42190594c nss-3.14.3-4.el6_4.x86_64.rpm a2dcfab2e26fc6ea3315e8edc350e4d187ee696953df9e8c2897de3520a4335e nss-devel-3.14.3-4.el6_4.i686.rpm ca3c264dca47cc751bab6d8e5be9f9082624fdccccc2bbc4ead802e8a197b57c nss-devel-3.14.3-4.el6_4.x86_64.rpm 433800763e54157c6a9d53df5522bff0624927697418ad84505d3d1dac67c158 nss-pkcs11-devel-3.14.3-4.el6_4.i686.rpm a1570ffea92be30305656b4c55e5303fe882975f2de5897c4241de2b3c76b183 nss-pkcs11-devel-3.14.3-4.el6_4.x86_64.rpm 18802405fe1c3aab26686261dae07eff2b87ca29e352d5dc167eae85d038e305 nss-softokn-3.14.3-3.el6_4.i686.rpm f9e2fd78ce1753318dc58cc4a25256f9df080acedb72e71ba18acfaa6273c807 nss-softokn-3.14.3-3.el6_4.x86_64.rpm 2a667eebdb02342f05998f0f90f8241625ae2860b6152f3f4f6a50813ba2af98 nss-softokn-devel-3.14.3-3.el6_4.i686.rpm 117d1a28427043e135d37d67cf0194a1bb11cc5cf7cafd85052daff62707958c nss-softokn-devel-3.14.3-3.el6_4.x86_64.rpm b3de628d33e606d08fc20371f8f31d2cde47894c0ff710d48dfadadfac436b19 nss-softokn-freebl-3.14.3-3.el6_4.i686.rpm 6d2da6ca90216ee54b0b3b21d81b2625d7f445cfbe5dc96f6aa9c7b596a1cbdf nss-softokn-freebl-3.14.3-3.el6_4.x86_64.rpm 605febe4e77275e1e2f82c572c96edff7eb3bdddba6babb40ba611b7c6a982a2 nss-softokn-freebl-devel-3.14.3-3.el6_4.i686.rpm 1af74a48132ed48e31251c266ba874bb668ce960bdcae358766b41d4f8b128e7 nss-softokn-freebl-devel-3.14.3-3.el6_4.x86_64.rpm 41229dc949f87617afe24002aa67b55f983a0048b8857f8cc8aef5932b9e2e19 nss-sysinit-3.14.3-4.el6_4.x86_64.rpm fa478a0b151e56838d0dc36a7c1bdb53888ebb54d931b314d329a679b4703ff8 nss-tools-3.14.3-4.el6_4.x86_64.rpm dba88322b701b9cdd9d40943cd7f8ed5b00d4e9a789c46ba3e8ed0000184af44 nss-util-3.14.3-3.el6_4.i686.rpm dec26cdc286feb5d39b3fd0ae745a7900df3888b43901b3b86e2d99869005876 nss-util-3.14.3-3.el6_4.x86_64.rpm af95b7bcb6e5927034d3b8a304fbda7442c4311538651dcc3c6a7c62d5636762 nss-util-devel-3.14.3-3.el6_4.i686.rpm 84a63ecf7366f2275029a26422280179dd18fd0d1215324c472acf8eba42a970 nss-util-devel-3.14.3-3.el6_4.x86_64.rpm Source: dbeec138d5284b66d667ec45c8e07548801aa3a5db5955bbaa4313bc6c949def nspr-4.9.5-2.el6_4.src.rpm 467f81da27edec40bd8e64809e53f156b396aa54bb397f5c18adb5d2eab3aeee nss-3.14.3-4.el6_4.src.rpm 08b72f9ad32172a9017328f5bb652280aafb7f35bdcf0b704a0d3a6fddd1d0ee nss-softokn-3.14.3-3.el6_4.src.rpm 7bf46cfaeacf80ac9e3d2197d2f3589b84f2125fe008f34a63751da36829dc23 nss-util-3.14.3-3.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 8 Aug 2013 08:45:54 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1146 CentOS 6 nss-pam-ldapd Update To: centos-announce(a)centos.org Message-ID: <20130808084554.GA46881(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1146 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1146.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2b9b463c19a42424b4a9e45b414b68897bfb82d46381621fe382f4a446c29409 nss-pam-ldapd-0.7.5-18.2.el6_4.i686.rpm x86_64: 2b9b463c19a42424b4a9e45b414b68897bfb82d46381621fe382f4a446c29409 nss-pam-ldapd-0.7.5-18.2.el6_4.i686.rpm 167b24d4bd19e09ca0639b21185a12547b415a00ee4bde96cb6ee66fb8d40f6f nss-pam-ldapd-0.7.5-18.2.el6_4.x86_64.rpm Source: db2472a9bf272cba36b901960f2290592222718c63eb8ba136e65a555d409e11 nss-pam-ldapd-0.7.5-18.2.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 6 ***********************************************

1 0

problem configuring grub for a dual-boot
by Vanhorn, Mike 08 Aug '13

08 Aug '13

I have Windows 7 on /dev/sda and CentOS 6.4 on /dev/sdb. Here are the layouts: (parted) select /dev/sda Using /dev/sda (parted) print Model: ATA WDC WD10EZEX-00Z (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 374MB 373MB primary ntfs boot 2 374MB 1000GB 1000GB primary ntfs (parted) select /dev/sdb Using /dev/sdb (parted) print Model: ATA ST500DM002-1BD14 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 boot 2 211MB 735MB 524MB ext4 3 735MB 500GB 499GB lvm /boot/efi/EFI/redhat/grub.conf looks like this: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,1) # kernel /vmlinuz-version ro root=/dev/mapper/vg_amrl01-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sdb1 device (hd0) HD(1,800,64000,9b55c4a9-fdbe-4fcd-857b-8e7e129e29f9) default=0 timeout=5 splashimage=(hd0,1)/grub/splash.xpm.gz hiddenmenu title CentOS 6 (2.6.32-358.14.1.el6.x86_64) root (hd0,1) kernel /vmlinuz-2.6.32-358.14.1.el6.x86_64 ro root=/dev/mapper/vg_amrl01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_amrl01/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_amrl01/lv_root rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-358.14.1.el6.x86_64.img title Windows 7 rootnoverify (hd1,0) chainloader +1 The system boots into CentOS just fine, but selecting the "Windows 7" entry results in invalid EFI file path Error 1: Filename must be either an absolute pathname or blocklist Press any key to continue... By my understanding, since grub is installed on sdb, then sdb becomes hd0 and thus sda would become hd1, and so telling it to boot Windows from hd1,0 makes sense. Also, since anaconda created the Windows entry during the CentOS install, I would have expected this to work. However, as it doesn't work, I'm clearly missing something. Can someome please point me in the right direction as to why this isn't working? Thanks! --- Mike VanHorn Senior Computer Systems Administrator College of Engineering and Computer Science Wright State University 265 Russ Engineering Center 937-775-5157 michael.vanhorn(a)wright.edu http://www.cecs.wright.edu/~mvanhorn/

3 3

file system resizing with cloud-init on centos/redhat??
by Gelen James 07 Aug '13

07 Aug '13

Hi, Has any one used resizefs module with cloud-init on centos/redhat before? How to call it with #cloud-config user data, do I need to give it any parameters? I googled cloud-init, but it is pretty difficult to find a manual/book on this, and mostly they are Ubuntu based. If possible, I'd like to use a same image/AMI to boot up instances(VMs) with different disk size setup, and let cloud-init to take care of increasing partition size, and file system resizing. Is it possible for centos/redhat? Any insights / suggestions are welcomed. Thanks. Gelen

2 1

repoforge :: is it still active?
by Adrian Sevcenco 07 Aug '13

07 Aug '13

Hi! I am trying to to ask the packagers from repoforge for updated packages of ganglia and rrdtool and i got no answer on their mail list.. Does anyone have idea if repoforge is still active? Thanks! Adrian

2 2

Problem with touchpad
by Ahmed 07 Aug '13

07 Aug '13

Hi there, i recently installed centos 6 64bit version on my HPProBook4530s Laptop. After running full system update and system restarted, my touch pad is not responding any more. How can i fix this problem? Kind Regards

3 5

Re bug 0006319
by m.roth＠5-cent.us 07 Aug '13

07 Aug '13

Hi, folks, I think it's just been since we did the latest upgrade and rebooted the other day that I've started seeing the error described in the bug - console spitting out "kernel: do_IRQ: 8.65 No irq handler for vector (irq -1)" occasionally - with the current std. kernel: 2.6.32-358.14.1.el6.x86_64 #1 SMP Tue Jul 16 23:51:20 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Is there any current status on this? mark

1 1

CentOS-announce Digest, Vol 102, Issue 5
by centos-announce-request＠centos.org 07 Aug '13

07 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1140 Critical CentOS 5 firefox Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Aug 2013 11:33:09 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1140 Critical CentOS 5 firefox Update To: centos-announce(a)centos.org Message-ID: <20130807113309.GA13781(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1140 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1140.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0fd111d99fd3247e21ee663e5d15238eccd25aff8ef145b224203059b7719549 firefox-17.0.8-1.el5.centos.i386.rpm bf9ea3ba8425d286a40dbd37d697ef4a7cfe884c7abb9b8ada63e79031048a89 xulrunner-17.0.8-3.el5_9.i386.rpm 4a9e979a06d7fab3e0ea7b322fb1e602a805cd9ba0bfeed62c62a843d9ce4be6 xulrunner-devel-17.0.8-3.el5_9.i386.rpm x86_64: 0fd111d99fd3247e21ee663e5d15238eccd25aff8ef145b224203059b7719549 firefox-17.0.8-1.el5.centos.i386.rpm 3f605403f601215de227a98d7a62d0491153da5a06cfb093ac7ea6a524423361 firefox-17.0.8-1.el5.centos.x86_64.rpm bf9ea3ba8425d286a40dbd37d697ef4a7cfe884c7abb9b8ada63e79031048a89 xulrunner-17.0.8-3.el5_9.i386.rpm 2cd3ee9785aee017728e748f7b3fe773701a420920750ea13d44e5531169e0d9 xulrunner-17.0.8-3.el5_9.x86_64.rpm 4a9e979a06d7fab3e0ea7b322fb1e602a805cd9ba0bfeed62c62a843d9ce4be6 xulrunner-devel-17.0.8-3.el5_9.i386.rpm 6f95e74859fd807ca2c334d2dcf01a4ac07b1cda233b7ffe16888dbadc45b88d xulrunner-devel-17.0.8-3.el5_9.x86_64.rpm Source: 7a33b9581d894767f9513e4a49ce1c2fd763848ab7cbd836f6a19a52747cdd1e firefox-17.0.8-1.el5.centos.src.rpm fc50bc7a0edb0a5b3eb7667d81230d29df6b3bd4e7707888d23dc2dbc5986569 xulrunner-17.0.8-3.el5_9.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 5 ***********************************************

1 0

problem with libnotify
by Ahmed 07 Aug '13

07 Aug '13

Hi there, I want to install an app but the system showed the following results >uname -a Linux localhost.localdomain 2.6.32-358.14.1.el6.x86_64 #1 SMP Tue Jul 16 23:51:20 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux >yum install odeskteam-3.2.59-1fc15.i386.rpm Loaded plugins: fastestmirror, refresh-packagekit Loading mirror speeds from cached hostfile * base: centos-mirror.magsnet.net * extras: centos-mirror.magsnet.net * rpmforge: nl.mirror.eurid.eu * updates: centos-mirror.magsnet.net Setting up Install Process Examining odeskteam-3.2.59-1fc15.i386.rpm: odeskteam-3.2.59-1fc15.i386 Marking odeskteam-3.2.59-1fc15.i386.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package odeskteam.i386 0:3.2.59-1fc15 will be installed --> Processing Dependency: libnotify.so.4 for package: odeskteam-3.2.59-1fc15.i386 --> Finished Dependency Resolution Error: Package: odeskteam-3.2.59-1fc15.i386 (/odeskteam-3.2.59-1fc15.i386) Requires: libnotify.so.4 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest > yum install libnotify-0.7.5-6.fc20.i686.rpm Loaded plugins: fastestmirror, refresh-packagekit Loading mirror speeds from cached hostfile * base: centos-mirror.magsnet.net * extras: centos-mirror.magsnet.net * rpmforge: nl.mirror.eurid.eu * updates: centos-mirror.magsnet.net Setting up Install Process Examining libnotify-0.7.5-6.fc20.i686.rpm: libnotify-0.7.5-6.fc20.i686 Marking libnotify-0.7.5-6.fc20.i686.rpm as an update to libnotify-0.5.0-1.el6.x86_64 Error: Nothing to do My question is that how i can install libnotify.so.4. My system contains libnotify.so.1 (libnotify 0.5) version resides in the system.

2 2

CentOS-announce Digest, Vol 102, Issue 4
by centos-announce-request＠centos.org 06 Aug '13

06 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1132 CentOS 6 initscripts Update (Karanbir Singh) 2. CESA-2013:1135 Moderate CentOS 5 nss Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Aug 2013 17:20:36 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1132 CentOS 6 initscripts Update To: centos-announce(a)centos.org Message-ID: <20130805172036.GA15374(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1132 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1132.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fb1cb980144bab4b2cccb2d47158c2d15e10ea275a971b7f9d02bfe81da66562 debugmode-9.03.38-1.el6.centos.2.i686.rpm 94c14cf5866a42073d0543140225b05c2b19c7a4e732a862bb7051b2982aa9fb initscripts-9.03.38-1.el6.centos.2.i686.rpm x86_64: 34e2aa48460fc11374eb41c5a2a8063ac042532a194ad55a16d0b9bd7f6bb064 debugmode-9.03.38-1.el6.centos.2.x86_64.rpm dc753e90ebfc910ef32e4dece3badf3cfbf63fe165fe781b6669e7aa5521bf78 initscripts-9.03.38-1.el6.centos.2.x86_64.rpm Source: 944aaa85bea4c2ff792cf5dc0b44efee270a205faa17bddbd51fd24267916d9c initscripts-9.03.38-1.el6.centos.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 5 Aug 2013 19:56:06 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1135 Moderate CentOS 5 nss Update To: centos-announce(a)centos.org Message-ID: <20130805195606.GA31104(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1135 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1135.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: efa1b726866191f488cc310a3b2f29cf6e1bfd90654b58dd9663409ce098575e nspr-4.9.5-1.el5_9.i386.rpm 40bf696a14a89b10c5062088589754bb734e50ad8fb04ae553a3a16b7c15b2f3 nspr-devel-4.9.5-1.el5_9.i386.rpm 18d2bfe2ab657fde1295c8f21c3ba4287ec8f4608edabc7e30ad9f46d0452493 nss-3.14.3-6.el5_9.i386.rpm bb4e37d79c646ad6d4c91d731750a23ab947af0314f2cd1b4c5bc1abdcac2832 nss-devel-3.14.3-6.el5_9.i386.rpm c092d06ee934538acb8797823625187606f799e5bfd9e41352e1d98fc0096f8d nss-pkcs11-devel-3.14.3-6.el5_9.i386.rpm 25d14834d64b6dfdb2a039f37d44e3f0cdda3656ea251db4b4446842eb25a8d5 nss-tools-3.14.3-6.el5_9.i386.rpm x86_64: efa1b726866191f488cc310a3b2f29cf6e1bfd90654b58dd9663409ce098575e nspr-4.9.5-1.el5_9.i386.rpm e56f7b51864fc743cf76b10e2f8e00fc3adb404702a877cd86c8ea08242efa23 nspr-4.9.5-1.el5_9.x86_64.rpm 40bf696a14a89b10c5062088589754bb734e50ad8fb04ae553a3a16b7c15b2f3 nspr-devel-4.9.5-1.el5_9.i386.rpm c711d07ec20c9a28e8074ab5bcc526f9982a6e8166c105a6f2f5df882a3e66e5 nspr-devel-4.9.5-1.el5_9.x86_64.rpm 18d2bfe2ab657fde1295c8f21c3ba4287ec8f4608edabc7e30ad9f46d0452493 nss-3.14.3-6.el5_9.i386.rpm 67eaa1e13b729a368b93056af8562485e2703a4423366ea71c049361b04c08d2 nss-3.14.3-6.el5_9.x86_64.rpm bb4e37d79c646ad6d4c91d731750a23ab947af0314f2cd1b4c5bc1abdcac2832 nss-devel-3.14.3-6.el5_9.i386.rpm f1b286663a1fcd747a6dd33e21b425135280f69f179f6278bf6f343e24163bf9 nss-devel-3.14.3-6.el5_9.x86_64.rpm c092d06ee934538acb8797823625187606f799e5bfd9e41352e1d98fc0096f8d nss-pkcs11-devel-3.14.3-6.el5_9.i386.rpm d8b25960e5ef56845fc2db90011d19cd455b591e870e6ef4ab288f466ed9f178 nss-pkcs11-devel-3.14.3-6.el5_9.x86_64.rpm 3d347de738e659beeec27a55fb8e149c65cb4c97fa881b90b7ebec4fb88581c9 nss-tools-3.14.3-6.el5_9.x86_64.rpm Source: 2265285a13c3f492b5a2455b39817d3b1a7034935ca6de068cdd83eb4dab71e9 nspr-4.9.5-1.el5_9.src.rpm 1dc9a55d8d72d92f84ac9aca20ae3c51a266abcf75c8b950cd31694bb85a5d46 nss-3.14.3-6.el5_9.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 4 ***********************************************

1 0

Re: [CentOS] NFS - No lista dos directorios especificos
by diegors＠gmail.com 06 Aug '13

06 Aug '13

Oh, i'm sorry. I choose bad the recipient. Pd: I think that was the reason that nobody answer to me :p ------Mensaje original------ De: Leon Fauster Remitente: centos-bounces(a)centos.org Para: CentOS mailing list Responder a: CentOS mailing list Asunto: Re: [CentOS] NFS - No lista dos directorios especificos Enviado: 6 de ago de 2013 05:30 Am 06.08.2013 um 04:07 schrieb Diego Sanchez <diegors(a)gmail.com>: > Estimados. Actualmente, estoy tirando los backups a un server > que comparte por NFS los directorios. ... Diego - por favor, escriba en Inglés (lista inglésa) -- LF _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Diego Sanchez Sent from my mobile

1 0

NFS - No lista dos directorios especificos
by Diego Sanchez 06 Aug '13

06 Aug '13

Estimados. Actualmente, estoy tirando los backups a un server que comparte por NFS los directorios. Me encuentro con un problema, por ahora en dos servidores, en el cual no puedo ver directorios exportados. Server: LaCie 5Big Network (sistema propietario, sin acceso root. http://www.lacie.com/la/products/product.htm?id=10485) Cliente1: root@server [/home/cpbackuptmp]# uname -a Linux fq.dn.net.ar 2.6.18-348.1.1.el5.centos.plus #1 SMP Tue Jan 22 19:16:31 EST 2013 i686 athlon i386 GNU/Linux El problema, radica en que no puedo ver dos directorios exportados, dejandome medio sin terminar el directorio donde tiro los backups, por lo que estoy pasandolos via ftp Existe algun limite en NFS en cuanto a los directorios a exportar? Alguna otra idea por donde puedo buscar el problema/solucion? La verdad, que reconozco que tengo muy poco conocimento sobre trabajar con NFS. .... ------ root@server [/bkp]# showmount -e aaa.bbb.ccc.110 Export list for aaa.bbb.ccc.110: /shares/a * /shares/b * /shares/c * /shares/d * /shares/f * ... /shares/y * root@server [/bkp]# showmount -e aaa.bbb.ccc.110|wc -l 25 Deberia tener 27 directorios exportados. En el LaCie, los directorios fueron creados de la misma forma. De hecho, he creado otros para otros servidores, y se muestran. Tambien probe cambiando el nombre, eliminandolo y volviendo a crear, etc. Tambien reinicie el LaCie. Solucion bananera y argentina en mente: crear un solo directorio, adecuar todos los otros servers y realizar backup en los directorios especificos La verdad, mucho no me convence trabajar de esta manera, pero bue... Ambos servidores, son CentOS 5.9 final (el 3ro con esta version, lo monta perfectamente) Algun limite de la version? -- Diego - Yo no soy paranoico! (pero que me siguen, me siguen)

2 1

run script on cron job only run on first Saturdat every month???
by mcclnx mcc 05 Aug '13

05 Aug '13

we have CENTOS 5.5 on DELL server. One of our script need run on first Saturday every month. We have following setup on cron job but it run every Saturday. 15 04 1-7 * 6 /home/app/oracle/backup/monthlybk.sh Any one know how to fix it? Thanks.

15 20

Re: [CentOS] ghostscript-8.70-14.el5_8.1.x86_64 & hylafax+
by Blaž Bogataj 05 Aug '13

05 Aug '13

My Centos 6.x use ghostscript.x86_64 8.70-15.el6_4.1 @updates for hylafax/avantfax from epel or rpmforge. I can't determine from which repository it come, yum list return: [root@fax ~]# yum list ghost* Loaded plugins: fastestmirror, priorities, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: centos.digitalnova.at * epel: be.mirror.eurid.eu * extras: centos.digitalnova.at * rpmforge: apt.sw.be * updates: centos.digitalnova.at 1300 packages excluded due to repository priority protections Installed Packages ghostscript.x86_64 8.70-15.el6_4.1 @updates ghostscript-devel.x86_64 8.70-15.el6_4.1 @updates ghostscript-fonts.noarch 5.50-23.1.el6 @anaconda-CentOS-201112091719.x86_64/6.2 ghostscript-gtk.x86_64 8.70-15.el6_4.1 @updates Blaž Bogataj

2 1

CentOS-announce Digest, Vol 102, Issue 3
by centos-announce-request＠centos.org 05 Aug '13

05 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1131 CentOS 5 cman Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Aug 2013 10:26:38 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1131 CentOS 5 cman Update To: centos-announce(a)centos.org Message-ID: <20130805102638.GA3478(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1131 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1131.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8cca452c8b30e288fc53d2ae3692a9a6a4ed132d32b2881f72f1db99a56c05cb cman-2.0.115-109.el5.4.i386.rpm bfcecfec10a8545462def5b00cda1506d31f92da696ff052bec5815eece9e555 cman-devel-2.0.115-109.el5.4.i386.rpm x86_64: b5084d9c985433b00024b4b0d239ac7673255614219fde3368a520998cec933f cman-2.0.115-109.el5.4.x86_64.rpm bfcecfec10a8545462def5b00cda1506d31f92da696ff052bec5815eece9e555 cman-devel-2.0.115-109.el5.4.i386.rpm 12b5444f6282b94c2e5365f5221e51af8b07b2eb2cf97dc737047c43ec96c846 cman-devel-2.0.115-109.el5.4.x86_64.rpm Source: ec46fa315a15d6669fa2bb7b31679bc7adf2b93685b3e44bbafc8e4a611647a8 cman-2.0.115-109.el5.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 3 ***********************************************

1 0

Re: [CentOS] surveillance DVR
by m.roth＠5-cent.us 04 Aug '13

04 Aug '13

Brian Mathis wrote: > On Wed, Jul 31, 2013 at 10:33 AM, <m.roth(a)5-cent.us> wrote: >> Arun Khan wrote: >> > On Wed, Jul 31, 2013 at 8:10 PM, <m.roth(a)5-cent.us> wrote: >> >> Does anyone know of a DVR that runs Linux that does NOT USE Active-X, and/or allows logging in directly? >> > >> > MythTV? It has a web UI. >> >> No joy, either this, nor zoneminder. Right now, we just have motion running on the servers that have the USB cameras plugged in; after the recent grief we had with the last upgrade to CentOS, when I wound up moving one camera that just would not work - the top 10% of the screen was fine, and the rest green, and the other I had to change the resolution to 240x360 to get it to not do that, my manager asked me to look into appliances that we could manage from our servers. >> >> We've found Zmodo, and another one, but with *both* of them, though the DVR that comes with the set is running Linux, web control *REQURES* IE, and you can't log in directly using ssh or telnet. > If the camera is running on Windows, you can probably stream directly from the device using ffmpeg. See here for details: > http://trac.ffmpeg.org/wiki/DirectShow > You would set the input as the camera and the output as a file, and add any codec options you want, etc... > > I'm sure there's probably a similar mode for Linux. If nothing else, you can probe the camera to see what modes it supports, etc..., to make sure you're picking one that works, > Ok, I *must* not have made clear what I was asking for. Let me try one more time.... We want an appliance, such as <http://www.zmodo.com/4ch-h-264-full-d1-dvr-500gb-hdd-with-4-cmos-480tvl-ir-…>, that we can put on our network, and manage, and d/l videos for long-term storage, onto a server. We have exactly, um, two? boxes running Windows, and we normally do *nothing* with them. We've over 100 servers running Linux, and that's where we live. Currently, the USB cameras are connected to ->CENTOS SERVERS<-, no WinCrap at all. We use the standard package motion to record for surveillance. We're looking for an "appliance", like the link I give above, that we can manage the same way that we manage an HP printer, which does *NOT* require IE, and we can do with firefox, or probably even konqueror. At the very least, we want to use, say, wget, to d/l the videos. NOTHING RUNNING WINDOWS!!!!!!!!!!!!!!!!!!!!!!!!!!!! Now, if I can calm myself down, have I made it clear what it is we're looking for? If so, can anyone recommend a source for such an appliance? mark

7 11

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss