- Discuss - lists.centos.org

Disabling user switching in CentOS 6
by Vanhorn, Mike 10 Jul '13

10 Jul '13

Installing CentOS 6 on a lab full of workstations, and I want to disable fast user switching. With CentOS 5, I simply made sure that the "user_switch_enabled" entry in /etc/gconf/schemas/gnome-screensaver.schemas was set to false. However, that doesn't work with CentOS 6. I've found various proposed solutions to this issue, such as gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \ --type bool --set "/apps/gnome-screensaver/user_switch_enabled" "false" gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \ --type bool --set "/desktop/gnome/lockdown/disable_user_switching" "true" neither of which work, either. Does anyone know the proper way to disable user switching with CentOS 6? Thanks! --- Mike VanHorn Senior Computer Systems Administrator College of Engineering and Computer Science Wright State University 265 Russ Engineering Center 937-775-5157 michael.vanhorn(a)wright.edu http://www.cecs.wright.edu/~mvanhorn/

2 3

Understanding RPM trigger scripts?
by James Pearson 10 Jul '13

10 Jul '13

I'm trying to get my head around RPM trigger scripts - but currently getting very confused ... I have a custom RPM which has in its spec file a '%triggerin' script for the 'kernel' RPM - i.e. a script that I want to run when the kernel RPM is upgraded/installed This works OK - once my custom RPM is installed, if the kernel is subsequently upgraded/installed, my trigger script is run However, the same trigger script is also run when I upgrade my custom RPM - which I don't want - and so far, I can't find a reliable way of making sure it isn't run in this case. The more I search for an answer, the more I get confused :-) I know this is a bit off-topic and obscure, but does anyone know how to make sure such a trigger script is only run when the RPM that triggers it is upgraded/installed - and not when the RPM that contains the trigger script is upgraded? Thanks James Pearson

2 2

CentOS-announce Digest, Vol 101, Issue 6
by centos-announce-request＠centos.org 10 Jul '13

10 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2013:1025 CentOS 5 tzdata Update (Johnny Hughes) 2. CEEA-2013:1025 CentOS 6 tzdata Update (Johnny Hughes) 3. CEBA-2013:1036 CentOS 6 ibus-hangul FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 9 Jul 2013 11:05:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1025 CentOS 5 tzdata Update To: centos-announce(a)centos.org Message-ID: <20130709110531.GA20529(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1025 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1025.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 281cd1085064ef4fd068838d8b4249b38ad10c006f04195ac56bb8f69f6f845b tzdata-2013c-2.el5.i386.rpm 35373d693d8965bc3d847d92839ddb7934f920eedac41822128664922901e094 tzdata-java-2013c-2.el5.i386.rpm x86_64: 0ca9d0fd0634df1d9007653f5d29fa420838520485c29f5c2dd158a8b65e6c4e tzdata-2013c-2.el5.x86_64.rpm 5f7b300b2ece95ba0372ae126f7c23b95ce2e2b2dacd11b44a2ac295e8122410 tzdata-java-2013c-2.el5.x86_64.rpm Source: 3f0632a84264f02b6aaf60b156980801b826b762e810c37815aa7b622134fa31 tzdata-2013c-2.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 9 Jul 2013 12:47:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1025 CentOS 6 tzdata Update To: centos-announce(a)centos.org Message-ID: <20130709124729.GA50683(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1025 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1025.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c9534b3f1b49068bfc2f4925aa6f17670d9577f43478c20ef68b37975adb41a9 tzdata-2013c-2.el6.noarch.rpm 350c4cfc1098dd8c997aae6dec030c35e69b4ccde9c6750624ff38e4e563c611 tzdata-java-2013c-2.el6.noarch.rpm x86_64: c9534b3f1b49068bfc2f4925aa6f17670d9577f43478c20ef68b37975adb41a9 tzdata-2013c-2.el6.noarch.rpm 350c4cfc1098dd8c997aae6dec030c35e69b4ccde9c6750624ff38e4e563c611 tzdata-java-2013c-2.el6.noarch.rpm Source: c4e91b7a79faec1b915884298d6ed40088b768bf8761036e94e0a4af3275db4e tzdata-2013c-2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 10 Jul 2013 09:16:25 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1036 CentOS 6 ibus-hangul FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130710091625.GA64505(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1036 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1036.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 87741a71934a7768442e60f3b5bf5cc95627cf3602202396d94a85eea5842872 ibus-hangul-1.3.0.20100329-6.el6.i686.rpm x86_64: 6206b30b537b13d11d5eaa3f051d8a6d0dac87c6edf46dbf54c9b25a12cd7dbd ibus-hangul-1.3.0.20100329-6.el6.x86_64.rpm Source: c30566424afcda83b6e086652907bae3e81aea47ef94e4a846504d47eb5aeb7b ibus-hangul-1.3.0.20100329-6.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 6 ***********************************************

1 0

gspca tarballs?
by m.roth＠5-cent.us 09 Jul '13

09 Jul '13

Does anyone know of a reliable site to d/l a tarball of gspca? *NOTHING* I've tried works on those two servers, suggesting to me that there's some weird bug in the driver that's in the kernel. They remain, as I mentioned, about the top 15% ok, and the rest green screen (which I've googled to find other folks, years ago, complaining about), so the only thing left I can think of is to try to build the driver myself. mark

1 0

Cannot find some packages in CentOS 6.2
by Miraj Mohamed 09 Jul '13

09 Jul '13

Hi I am trying to run a set of applications (which was build and run on CentOS 5 successfully) on CentOS 6.2 (x86_64). I can't find following packages fonts-chinese liberation-fonts freeradius2 freeradius2-utils Why are these packages not available in CentOS6? What are the replacement for these packages? Thanks -miraj

3 2

CentOS-announce Digest, Vol 101, Issue 5
by centos-announce-request＠centos.org 09 Jul '13

09 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1018 CentOS 6 openhpi Update (Johnny Hughes) 2. CEBA-2013:1017 CentOS 6 ksh Update (Johnny Hughes) 3. CEBA-2013:1021 CentOS 6 gegl FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 8 Jul 2013 13:47:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1018 CentOS 6 openhpi Update To: centos-announce(a)centos.org Message-ID: <20130708134706.GA20740(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1018 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1018.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1c297c2657134d26cff790a5c596ec9e08cb6233e69ad9820b7ad10b7b3378fd openhpi-2.14.1-3.el6_4.3.i686.rpm ea316391426db33598fec894783469747aed706b02dff35b7499663f0138b480 openhpi-devel-2.14.1-3.el6_4.3.i686.rpm 641e67c708bbff2ef3ef40eafc5f26551bd27cabff5bf885e1cd5f2a1348a1f8 openhpi-libs-2.14.1-3.el6_4.3.i686.rpm x86_64: bd5b7f985619c06a1a33fb352db2087f9bfde985b327661582098dfc11f49776 openhpi-2.14.1-3.el6_4.3.x86_64.rpm ea316391426db33598fec894783469747aed706b02dff35b7499663f0138b480 openhpi-devel-2.14.1-3.el6_4.3.i686.rpm 3b5e49ebaa592b0f2900551b9fe54f7dba720ae9b81b31a04af5495c455bd8ad openhpi-devel-2.14.1-3.el6_4.3.x86_64.rpm 641e67c708bbff2ef3ef40eafc5f26551bd27cabff5bf885e1cd5f2a1348a1f8 openhpi-libs-2.14.1-3.el6_4.3.i686.rpm 2f1aa4df4db30031e7f05c6808277200002dd98d4a9efeecaa77646dc8124a09 openhpi-libs-2.14.1-3.el6_4.3.x86_64.rpm Source: d385533d531364a8bc2abe80010cde6f7ea20d4da248fd19f71fd364aeb47cb8 openhpi-2.14.1-3.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 8 Jul 2013 13:47:21 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1017 CentOS 6 ksh Update To: centos-announce(a)centos.org Message-ID: <20130708134721.GA20817(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1017 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1017.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a22af034674b76713e965b640b45b5a53b80cc1f798eb9166600535a8e26b595 ksh-20100621-19.el6_4.4.i686.rpm x86_64: e49fdb1f9d788654245f3917a6ce4513f5fdb1a9afe2abfe7a1cdecdb8a10ed1 ksh-20100621-19.el6_4.4.x86_64.rpm Source: cdde326d26b72eda07910225eee5d1664e9aec0db1c80eeb5c350c86340df70e ksh-20100621-19.el6_4.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 8 Jul 2013 15:52:08 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1021 CentOS 6 gegl FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130708155208.GA22700(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1021 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1021.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: af8fb3c11d842daca7af9b552a6bbda8d1f1f12e131251e9bed464fcb0a9b3e7 gegl-0.1.2-5.el6.i686.rpm 787a0c09793a98a101936875a75021c01b60c8ed6a9c8b86b43ccee1c4497a4e gegl-devel-0.1.2-5.el6.i686.rpm x86_64: af8fb3c11d842daca7af9b552a6bbda8d1f1f12e131251e9bed464fcb0a9b3e7 gegl-0.1.2-5.el6.i686.rpm 5474be4025b7b36775c321e20b5ed53df4d5b31106edd2fcdea564d21feac2a6 gegl-0.1.2-5.el6.x86_64.rpm 787a0c09793a98a101936875a75021c01b60c8ed6a9c8b86b43ccee1c4497a4e gegl-devel-0.1.2-5.el6.i686.rpm a82a0b521bee20a96d716f5408415a609fdb5519fdd39b28e3173a5b6fd9b042 gegl-devel-0.1.2-5.el6.x86_64.rpm Source: 9cf23d3776b838ce7c03a03632eaa38d0c8eb6012c933529b615c6d9e6d84ded gegl-0.1.2-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 5 ***********************************************

1 0

change sudoers remotely
by Tim Dunphy 09 Jul '13

09 Jul '13

hello list, I've been asked to give someone sudo rights across an entire environment without the benefit of something like puppet or chef or cfengine et al. What I've come up with so far is this: ssh -t miaprbicsra04v sudo -S /bin/echo "rsherman ALL=$ALL$ NOPASSWD: /sbin/service /bin/rm /usr/bin/du /bin/df" >> sudo tee /etc/sudoers Right now that's just to one host, but I plan on substituting a list of hosts once I get farther along. Problem is, the output hangs on the tee command. Not sure why. Any suggestions? Thanks, Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

7 7

CentOS 6.4 login after reboot after apcupsd shutdown - shows POWER FAILURE
by Rob Kampen 09 Jul '13

09 Jul '13

Hi list, just putting a new server through its automatic shutdown triggered by the UPS / apcupsd. All worked faultlessly, including powering up when power came back on to the UPS. So then I go to log in and get "POWER FAILURE" followed by "Authentication failure" - this is on the console via SSH I just get "POWER FAILURE" and the ssh connection drops. So I guess the, log everyone out and stop further logins instruction is still lurking around somewhere. How do I regain control of my server?? Does this mean I need to boot with a rescue disk and edit some file somewhere?? How do I prevent this re-occurring, after a perfect shutdown and restart, only to get stymied here. Google has lots of help for dealing with various corruptions due to power failure - not the case here, the POST, grub, init restart all look just fine. TIA

2 2

This isn't supposed to be difficult (how to nntp post to the Gmane Pan user group)
by Rock 09 Jul '13

09 Jul '13

I realize this is (mostly) off topic, but I'm befuddled as to *how* one can post to the Gmane Pan Users' group (gmane.comp.gnome.apps.pan.user) using any nntp USENET client (e.g., Pan, on Centos). I'm already subscribed (by having sent an email to pan-users(a)nongnu.org) but I just want that USENET group to work like *this* USENET group, where I can post using a server:port login:password combination such as we use here: Server: news.gmane.org Port: 119 Login: blank Password: blank User: Rock I've looked here (http://dir.gmane.org/gmane.comp.gnome.apps.pan.user) and if the answer is there, I don't see it (maybe I missed it?). My basic question is so simply I'm shocked I'm having to ask it (of the wrong group even) ... which is ... the following: Q: How on earth is one supposed to post to the Gmane Pan users using an nntp client (which requires a server name and port & login/password)?

3 4

RedHat software collections and CentOS
by Filip Bartmann 08 Jul '13

08 Jul '13

I found, that RedHat released RedHat Software Collections for RedHat EL 6, will this be sometimes available for CentOS too?

6 6

spamassassin with postfix/dovecot
by Timothy Murphy 08 Jul '13

08 Jul '13

I'm trying to install spamassassin on a postfix/dovecot server, running CentOS-6.4, following the instructions at <http://wiki.centos.org/HowTos/Amavisd>. I think I have taken all the steps indicated, and the configuration seems to pass the tests suggested, although the response is much more sparse than that described: ------------------------ [tim@alfred ~]$ telnet localhost 10024 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 [127.0.0.1] ESMTP amavisd-new service ready helo localhost 250 [127.0.0.1] quit 221 2.0.0 [127.0.0.1] amavisd-new closing transmission channel Connection closed by foreign host. [tim@alfred ~]$ telnet localhost 10025 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 alfred.gayleard.eu ESMTP Postfix helo localhost 250 alfred.gayleard.eu quit 221 2.0.0 Bye Connection closed by foreign host. ------------------------ I tried sending the GTUBE spamassassin test- mail given, but I got the error message: ------------------------ Failed to transport message. The message content was not accepted. The server responded: "Message refused" ------------------------ But I see no evidence that email is being processed by spamassassin; and I don't see anything in any of the conf files setting that up. Any suggestions or elucidation gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

2 1

Having difficulty exporting display
by Yves S. Garret 08 Jul '13

08 Jul '13

Hello, This is my issue, my remote machine (CentOS 6.3, hosted in Azure windows environment) has an application that I need to test on my local box (CentOS 6.4, a laptop behind a router). Now, this is what I'm doing and the issue that I'm encountering: Local: $ xhost + $ ssh -X someusername(a)somehostname.net -p 49283 Remote: $ export DISPLAY=192.168.1.6:0.0 $ xclock ... and nothing, it just sits there and no xclock shows up :( . I'm fairly convinced that this is due to my router, but I don't know how to deal with it. Any ideas? Am I way off in my guess?

6 9

RedHat software collections and CentOS
by Filip Bartmann 08 Jul '13

08 Jul '13

I found, that RedHat released RedHat Software Collections for RedHat EL 6, will this be sometimes available for CentOS too?

2 1

Puppet el5 repo...
by John Doe 08 Jul '13

08 Jul '13

Hey, any puppet user on CentOS 5 using puppet lab's repository...? I installed their el5 repository but a puppet install asks for: ruby >= 1.8.7 which is only available on CentOS 6... Someone using their repo? Or do you use the repoforge one...? Thx, JD

5 9

Firewall will not disable - stumped!
by Bob Metelsky 07 Jul '13

07 Jul '13

very perplexed here - I need to turn off iptables. Ive tried service iptables save service iptables stop chkconfig iptables off service ip6tables save service ip6tables stop chkconfig ip6tables off edited OPGX280 ~ # cat /etc/sysconfig/system-config-firewall # Configuration file for system-config-firewall --disabled --service=ssh OPGX280 ~ :( # cat /etc/selinux/config SELINUX=disabled OPGX280 ~ :( # chkconfig |grep ip ip6tables 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipmievd 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipsec 0:off 1:off 2:off 3:off 4:off 5:off 6:off iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off ipvsadm 0:off 1:off 2:off 3:off 4:off 5:off 6:off Yet - when I reboot iptables gets started - if I run OPGX280 ~ # /etc/rc.d/init.d/iptables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:67 Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 ACCEPT all -- 0.0.0.0/0 192.168.122.0/24 state RELATED,ESTABLISHED 2 ACCEPT all -- 192.168.122.0/24 0.0.0.0/0 3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 4 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 5 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Note --> 192.168.122.0/24 is NOT my network, I just want the status to tell me iptables is NOT running What else can I look for?? Thanks Bob

4 5

fstab, unusual behavior of "missing UUID"
by Joseph Hesse 06 Jul '13

06 Jul '13

I have the following as the last line of my /etc/fstab file on a computer running CentOS6.4.. UUID=3b550884-8d05-41a5-a205-17b6d7269dd1 /mnt ext3 rw,suid,dev,exec,noauto,nouser,async 0 2 The UUID refers to an ext3 partition of a removable USB drive. If the USB drive is not plugged into the computer the computer will not boot. It seems that this is the incorrect behavior since "noauto" means there is nothing to mount. I noticed this situation since an almost identical /etc/fstab on a Fedora 18 computer will boot without the USB drive being plugged in. The reason this is important to me is that I want to plug my USB drive into a running computer and then mount it with "# mount /mnt" so I can do backups. Thank you, Joe Hesse

3 2

Windows 2008 R2 on KVM
by linuxsupport 06 Jul '13

06 Jul '13

Hi All, I have a KVM machine with CentOS 6.4 (64bit), I have a Linux guest running well on this, I created a Windows 2008 R2 guest and once I start it, after sometime all the host memory get exhausted and both the guests (linux+win) killed. Host has 32 GB RAM, 8 GB is allocated to Linux guest and 8 GB to Windows. Any idea? anyone experienced similar issue?

2 2

postfix + amavisd-new
by Timothy Murphy 06 Jul '13

06 Jul '13

I've been following the instrunctions in <http://wiki.centos.org/HowTos/Amavisd> for installing Amavisd, Clamav and SpamAssassin on top of postfix/dovecot . Dovecot is working fine, but I want to deal with spam email. (I am using sendmail/dovecot with procmail and spamassassin on another server, but decided to go over to postfix on this server when I saw it is now the CentOS default.) However, I came to a problem at the end of the instructions, when I appended ---------------------- # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== amavisfeed unix - - n - 2 lmtp -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 ---------------------- to /etc/postfix/main.cf . After doing this, when I ran #postfix reload or "sudo service postfix restart" I got the error message ---------------------- postfix: fatal: /etc/postfix/main.cf, line 699: missing '=' after attribute name: "amavisfeed unix - - n - 2 lmtp -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20" [all one line] ---------------------- Any elucidation or advice gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

2 2

odd inconsistency with nfs
by Miranda Hawarden-Ogata 05 Jul '13

05 Jul '13

I'm having an interesting/odd problem with nfs (I think). We recently (Monday/Tuesday) upgraded our file server from an ancient redhat 7.3 system to a shiny new centos 6.4 system. We don't see any issues between the other centos boxes, but things get a bit weird when we start mounting on the old solaris clients. The initial symptom was that the 'tab complete' wasn't working, and then we noticed that typing 'ls *' in the mounted directory was bombing. I tried forcing the mounting back to nfs3 but it's not consistent. I've set up two boxes as servers and one of the solaris boxes is my client. Each server has two shares that are mounted on the client. Of those four, one of them works properly and the other three do not. I've spent most of the day trying to debug this and I cannot for the life of me tell why one share works and the rest don't. Nothing seems to be special about that share versus the rest. Here are notes on how things are set up. on duke: (nis server) vi /etc/ypfiles/automap scrs1_bolt -soft,intr,retrans=1 boltzmann:/scrs1_bolt summit_bolt -soft,intr,retrans=1 boltzmann:/summit_bolt scrs1.mirror -soft,intr,retrans=1 goblin:/scrs1.mirror summit.mirror -soft,intr,retrans=1 goblin:/summit.mirror ( cd /var/yp ; make ) on boltzmann: (nfs server) df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb2 50G 13G 37G 26% / tmpfs 3.9G 1.2M 3.9G 1% /dev/shm /dev/sdb3 177G 188M 175G 1% /aux /dev/sda3 208G 44G 164G 21% /aux2 mkdir /aux/scrs1_bolt mkdir /aux2/summit_bolt ln -s /aux/scrs1_bolt /scrs1_bolt ln -s /aux2/summit_bolt /summit_bolt chmod 777 /aux/scrs1_bolt /aux2/summit_bolt service nfs restart vi /etc/exports /scrs1_bolt xxx.xxx.xxx.0/24(rw,no_root_squash,sync,insecure) /summit_bolt xxx.xxx.xxx.0/24(rw,no_root_squash,sync,insecure) exportfs -rv on bigdog: (client) mkdir /tmp/test/b1 /tmp/test/b2 /tmp/test/g1 /tmp/test/g2 touch /tmp/test/b1/nothing_is_mounted /tmp/test/b2/nothing_is_mounted /tmp/test/g1/nothing_is_mounted /tmp/test/g2/nothing_is_mounted mount -F nfs -o nfsvers=3 boltzmann:/summit_bolt /tmp/test/b1 mount -F nfs -o nfsvers=3 boltzmann:/scrs1_bolt /tmp/test/b2 mount -F nfs -o nfsvers=3 goblin:/summit.mirror /tmp/test/g1 mount -F nfs -o nfsvers=3 goblin:/scrs1.mirror /tmp/test/g2 ls -l /tmp/test/* -rw-r--r-- 1 root other 0 Jul 3 14:39 /tmp/test/nothing_is_mounted /tmp/test/b1: total 24 -rw-r--r-- 1 root other 0 Jul 3 12:32 SUMMIT_BOLT -rw-r--r-- 1 root other 0 Jul 3 09:26 boltzmann_test_summit /tmp/test/b2: total 32 -rw-r--r-- 1 root other 0 Jul 3 12:31 SCRS1_BOLT -rw-r--r-- 1 root other 0 Jul 3 09:26 boltzmann_test_scrs1 /tmp/test/g1: total 280 -rw-r--r-- 1 root other 0 Jul 3 15:40 .00_summit_nas_volume -rw-rw-r-- 1 root other 0 Jul 3 15:03 SUMMIT_MIRROR /tmp/test/g2: total 120 -rw-r--r-- 1 root other 0 Jul 3 15:40 .00_scrs1_nas_volume -rw-rw-r-- 1 root other 0 Jul 3 15:02 SCRS1_MIRROR ls -la /tmp/test/b1/* -rw-r--r-- 1 root other 0 Jul 3 12:32 /tmp/test/b1/SUMMIT_BOLT -rw-r--r-- 1 root other 0 Jul 3 09:26 /tmp/test/b1/boltzmann_test_summit ls -l /tmp/test/b2/* ls: No match. ls -l /tmp/test/g1/* ls: No match. ls -l /tmp/test/g2/* ls: No match. mount /tmp/test/b1 on boltzmann:/summit_bolt read/write/remote on Wed Jul 3 15:41:11 2013 /tmp/test/b2 on boltzmann:/scrs1_bolt read/write/remote on Wed Jul 3 15:41:11 2013 /tmp/test/g1 on goblin:/summit.mirror read/write/remote on Wed Jul 3 15:41:11 2013 /tmp/test/g2 on goblin:/scrs1.mirror read/write/remote on Wed Jul 3 15:41:11 2013 umount -a /tmp/test/b1 /tmp/test/b2 /tmp/test/g1 /tmp/test/g2 If I use automount to access the shares on the client, the mounts are made by default with nfs4 and we see this same 'no match' behaviour. It's probably something really stupid but I'm just not seeing it... If anyone has ideas and/or needs more info, please let me know. -- Thanks! Miranda

4 4

gspca - running out of ideas
by m.roth＠5-cent.us 05 Jul '13

05 Jul '13

For video capture from a USB camera, as near as I can tell, there's a problem with the driver gspca_zc3xx with the latest update to the kernel. All our cameras were working fine before the update to 2.6.32-358.11.1; since, two cameras, both on fairly new Dell servers are screwed. Meanwhile, on some older servers, same update, no problems. Of the two bad ones, one's got AMD, and the other Intel Xeons. Without any changes to the configuration file, I get about 10% to 15% at the top ok, and everything below it is green. Googling, I find other folks have had green screens over the years, so it's not just some color setting on my workstation. By adding /usr/lib64/libvdpau.so.1 to the LD_PRELOAD in /etc/init.d/motion, I get the rest of the screen on the Intel box looking like it works, but there's a slight yellowish tinge to the rest of the screen, and when I watched what we see using mplayer tv:// -tv driver=v4l2:device=/dev/video0 not only do I see the same, but we had someone walk in view of the camera... and *only* that top little bit shows the motion; the other 80% or 85% shows only what's there, and *not* the rest of the person. I'd gone through doing an insmod ...gspca_zc3xx with force_sensor option, and the only one that works is the same one it chooses itself if I just do a modprobe. Anyone have any ideas? I *really* can't reboot either of these servers so as to bring them up with the previous kernel, since they're important. mark

2 2

CentOS-announce Digest, Vol 101, Issue 4
by centos-announce-request＠centos.org 05 Jul '13

05 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1015 CentOS 6 tog-pegasus Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 4 Jul 2013 11:01:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1015 CentOS 6 tog-pegasus Update To: centos-announce(a)centos.org Message-ID: <20130704110131.GA31673(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1015 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1015.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 49567c7e1d870681ef6cbfccce96d77c577d19703969bc97c147e8f4f2613f96 tog-pegasus-2.12.0-3.el6_4.i686.rpm 13b4c11cce537e7f15b02d0f712ae64c476ff16a98aa12dc38c9481c9118348d tog-pegasus-devel-2.12.0-3.el6_4.i686.rpm 91d9ad1ff129c9da17b902db9580653aafc5f61fe07b313caf5bb5a43837925a tog-pegasus-libs-2.12.0-3.el6_4.i686.rpm x86_64: 65f919f7cc19be15db5a993774c966d3592b770ed4eba18c7fc1bcff1d6afde0 tog-pegasus-2.12.0-3.el6_4.x86_64.rpm 538ee40984f86a8ab5aad5820cd52914b8986e2cccb21b8ed98688da33a39240 tog-pegasus-devel-2.12.0-3.el6_4.x86_64.rpm 91d9ad1ff129c9da17b902db9580653aafc5f61fe07b313caf5bb5a43837925a tog-pegasus-libs-2.12.0-3.el6_4.i686.rpm 389082fe0c2c16ac4878cc23481b3eba1df734cabecda1d093ef643679bb4116 tog-pegasus-libs-2.12.0-3.el6_4.x86_64.rpm Source: 3a437ee55df1f9e485f0b6065d4bfa40f403e3fa071b98ef32b0501c5b1df9c0 tog-pegasus-2.12.0-3.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 4 ***********************************************

1 0

Skype For CentOS 6.4
by Mark LaPierre 05 Jul '13

05 Jul '13

Hey all. Does anyone know if there is a newer version of Skype than skype-2.1.0.81 available for CentOS 32 bit? Recent updates to Skype on other platforms has been causing video connection issues in the last few weeks. -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

6 9

sda and sdb reverse order with an external USB drive
by Joseph Hesse 04 Jul '13

04 Jul '13

Hello I am using 64 bit CentOS 6.4 on an i7 laptop with one sata drive and a CD drive. I installed CentOS by manually partitioning sda as: sda1 as /boot, sda2 as swap, sda3 as /. The booted system works great. When I insert an external USB drive, formatted as ext3, the hard drive on the laptop and the USB drive are either sda or sdb, depending upon the order on which I insert the USB drive and boot the system. Please see the two mount commands below for each of these situations. This seems to work in either order except for the fact that I don't want my USB drive to automount. What I want is that after I insert the USB drive in a running system and wait 15 seconds, I want to mount the USB drive with the command "# mount /mnt". To accomplish this I added a line to /etc/fstab but it didn't work. When I uncomment the last line in fstab (see below) the computer hangs and doesn't boot. I was successful with this strategy on a similar laptop with Fedora 18 but not my current one. Thank you, Joe Hesse ======================================================================================== The following mount command was issued by first completely booting CentOS and then inserting the external USB Drive. Note the sda3 is / and sda1 is /boot. [root@XoticPC ~]# mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) /dev/sdb1 on /media/GoFlex type ext3 (rw,nosuid,nodev,uhelper=udisks) ======================================================================================== The following mount command was issued by inserting the external USB drive in a powered down computer and then booting. Note the sdb3 is / and sdb1 is /boot. [root@XoticPC ~]# mount /dev/sdb3 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sdb1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) /dev/sda1 on /media/GoFlex type ext3 (rw,nosuid,nodev,uhelper=udisks) ======================================================================================== The /etc/fstab file was generated by the install process. The commented line at the bottom was added by me in an unsuccessful attempt to be able to insert the USB drive in a booted computer, not having it mount, and then control the mounting with "# mount /mnt". The last UUID is the UUID of sdb1 determined with the command "# blkid /dev/sdb1". # /etc/fstab UUID=1d7606b7-46b8-4b29-9a4e-a50a1f6a1759 / ext4 defaults 1 1 UUID=e0fdfeb1-e7a7-4a06-b5fa-7730c3c2e60d /boot ext4 defaults 1 2 UUID=d0e3c2ee-7c66-4d13-b387-1da958020b1a swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 #UUID=3b550884-8d05-41a5-a205-17b6d7269dd1 /mnt ext3 rw,suid,dev,exec,noauto,nouser,async 0 2

2 1

CentOS-announce Digest, Vol 101, Issue 3
by centos-announce-request＠centos.org 04 Jul '13

04 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1014 Important CentOS 5 java-1.6.0-openjdk Update (Johnny Hughes) 2. CESA-2013:1014 Important CentOS 6 java-1.6.0-openjdk Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 4 Jul 2013 10:07:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1014 Important CentOS 5 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20130704100744.GA21853(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1014 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1014.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2c38bf51cef2befcf717f8f486ae37867a5bd29ee42908ddf4d5d3b55436f2d3 java-1.6.0-openjdk-1.6.0.0-1.41.1.11.11.90.el5_9.i386.rpm 861d7c8fa3ff46b78a64187b45609921e49bec920fa00614fa52533b36db15ed java-1.6.0-openjdk-demo-1.6.0.0-1.41.1.11.11.90.el5_9.i386.rpm 992c01478b0662346ccb9561e46d5dadf281f9c523eb79112f9e2e5edc80cbae java-1.6.0-openjdk-devel-1.6.0.0-1.41.1.11.11.90.el5_9.i386.rpm 145d3a00005749d448b83077533e949591e6f732b108eb948769510cc51d11ed java-1.6.0-openjdk-javadoc-1.6.0.0-1.41.1.11.11.90.el5_9.i386.rpm 0a60d36f1a3ed0ad11c5d3a18890b079ed54ea3d9e1d757f78a0973b74120d61 java-1.6.0-openjdk-src-1.6.0.0-1.41.1.11.11.90.el5_9.i386.rpm x86_64: ca6b524ba111aaf9481e070a1185376dbde8d3c6a9a166b0a4af4a6f36619224 java-1.6.0-openjdk-1.6.0.0-1.41.1.11.11.90.el5_9.x86_64.rpm 26e9b66d4794be564bfe4e3c17d85cc244b22b2b1a923cb35e6ba245ff72c022 java-1.6.0-openjdk-demo-1.6.0.0-1.41.1.11.11.90.el5_9.x86_64.rpm 1b4c55b1209f5f3af0bb58b249e0a96eba4ae2fb576c38d8fc5f086915d4af2e java-1.6.0-openjdk-devel-1.6.0.0-1.41.1.11.11.90.el5_9.x86_64.rpm ef1484a976bd9f8f7db3a5943d19e12da3ea2497ca3e449c2a501ed640fdd5bc java-1.6.0-openjdk-javadoc-1.6.0.0-1.41.1.11.11.90.el5_9.x86_64.rpm 0b3a822767944484bd5393e0ac6899f04efcfabf0aed83ae971141c4b547cf56 java-1.6.0-openjdk-src-1.6.0.0-1.41.1.11.11.90.el5_9.x86_64.rpm Source: f9c9ff547c9c99d5bd3a7971d42c71c980392a4102274da09d02f8af2197fe62 java-1.6.0-openjdk-1.6.0.0-1.41.1.11.11.90.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 4 Jul 2013 10:17:25 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1014 Important CentOS 6 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20130704101725.GA30449(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1014 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1014.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ec3443d3637c5e1ee3d8ae68cb38ed1083611664bd5156410c8cba63f168c0dd java-1.6.0-openjdk-1.6.0.0-1.62.1.11.11.90.el6_4.i686.rpm cfa262c2b479163919f273ecc9036b79a2d2ff4c45d47ea27c0f22084cc7c944 java-1.6.0-openjdk-demo-1.6.0.0-1.62.1.11.11.90.el6_4.i686.rpm 605680de20b8c9f3950cf0352f225bcd9f48bfde19b04610776da09564891712 java-1.6.0-openjdk-devel-1.6.0.0-1.62.1.11.11.90.el6_4.i686.rpm f16c9b407fc942fa3df87583c295d1ec9f04e2e866f818f3cdae73408c829643 java-1.6.0-openjdk-javadoc-1.6.0.0-1.62.1.11.11.90.el6_4.i686.rpm 5970ed15745aec0470ebc34577526d484851fc3cf7b7366003a82dd87d98d203 java-1.6.0-openjdk-src-1.6.0.0-1.62.1.11.11.90.el6_4.i686.rpm x86_64: ee81d5fd1b9e094bdc130a04d1afdc190a90dc0420b6fa7121007f7057d69025 java-1.6.0-openjdk-1.6.0.0-1.62.1.11.11.90.el6_4.x86_64.rpm 88a92e6407c23d92db49d56f4741c1107aa96823378df109d1aacee058ffcd6f java-1.6.0-openjdk-demo-1.6.0.0-1.62.1.11.11.90.el6_4.x86_64.rpm ccb6b261f4505ad5c4dd72a9f28aea83b50bc3faabe0dd2211c14f9ace725d00 java-1.6.0-openjdk-devel-1.6.0.0-1.62.1.11.11.90.el6_4.x86_64.rpm f10a277d98c43b59b82a86733d0eae4604fd42205363280c0e872e6c4a95f0b1 java-1.6.0-openjdk-javadoc-1.6.0.0-1.62.1.11.11.90.el6_4.x86_64.rpm 9ade89dc1961212936ee97ce89d545030b8f1dfcf06ced1aa7a14a3259606c97 java-1.6.0-openjdk-src-1.6.0.0-1.62.1.11.11.90.el6_4.x86_64.rpm Source: 0398219e27505b5510182c5fdb33b24b23c7dd7e25f3073dfd7c4cafa63add6d java-1.6.0-openjdk-1.6.0.0-1.62.1.11.11.90.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 3 ***********************************************

1 0

Java/Solr - Could not reserve enough space for object heap.
by Rafał Radecki 04 Jul '13

04 Jul '13

Hi All. # cat /etc/redhat-release CentOS release 6.2 (Final) # uname -r 2.6.32-220.17.1.el6.centos.plus.x86_64 # rpm -qa | grep solr apache-solr-3.5.0-1.5... I have a solr installation which is invoked: /usr/bin/java -Xms25g -Xmx25g -DSTOP.PORT=8079 -DSTOP.KEY=mustard -Dsolr.solr.home=multicore -jar start.jar After start/when the java process is running: # free -m total used free shared buffers cached Mem: 32093 23975 8118 0 189 5736 -/+ buffers/cache: 18049 14043 Swap: 4095 22 4073 So the machine has 32GB of RAM, and java process needs 25GB to start. When I make a restart the java process dies and in log: Jul 4 08:17:27 test.local solr: Error occurred during initialization of VM Jul 4 08:17:27 test.local solr: Could not reserve enough space for object heap Jul 4 08:17:27 test.local solr: [FAILED] Then a second restart is ok, the process starts and solr is responding. Have you had such problems? As I think during stop jvm gives back the memory to the operating system and then during start is requesting 25GB (can there be a lag in this process?). No other services are running on this machine. Best regards, Rafal.

2 3

Centos 6.4 and Virtualbox
by Mark H Needleman 04 Jul '13

04 Jul '13

I'm trying to install Centos 6.4 under Virtualbox on a Mac running Lion. I downloaded the 2 iso DVD files and set Virtualbox to boot from DVD 1 When I start the vm it puts out a lot of messages then asks me what kind of install I want to do. I select the basic install and it tells me it found the media ( the iso DVD file I downloaded) puts out a message about the anaconda ( I think) install starting then goes to a screen with the Centos 6 logo and appears to do nothing. No more messages appear. Should I be using the minimal iso install file? I have installed Windows XP, 7 and 8 under Virtualbox and they all work. I also installed Ubuntu but didn't like it so I removed it and thought I would try Centos Does anyone know what might be going on and how to get it working? Thanks for any advice or help Mark Needleman Sent from Mark Needleman's iPad

3 2

trouble with crash utility
by Keith Keller 04 Jul '13

04 Jul '13

Hi all, I recently had an issue where, running kernel 2.6.32-358.11.1, the box would be up for about five minutes, then would crash and reboot. kdump saved the vmcore files, so I was hoping to run crash against them to see why this was occurring. I copied the vmcores to another machine, installed the kernel-debuginfo package, and gave it a try, but had no success: $ crash /usr/lib/debug/lib/modules/2.6.32-358.11.1.el6.centos.plus.x86_64/vmlinux vmcore crash 6.1.0-1.el6 Copyright (C) 2002-2012 Red Hat, Inc. Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation Copyright (C) 1999-2006 Hewlett-Packard Co Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited Copyright (C) 2006, 2007 VA Linux Systems Japan K.K. Copyright (C) 2005, 2011 NEC Corporation Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc. Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc. This program is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Enter "help copying" to see the conditions. This program has absolutely no warranty. Enter "help warranty" for details. GNU gdb (GDB) 7.3.1 Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-unknown-linux-gnu"... WARNING: kernels compiled by different gcc versions: /usr/lib/debug/lib/modules/2.6.32-358.11.1.el6.centos.plus.x86_64/vmlinux: 4.4.6 vmcore kernel: 4.4.7 WARNING: kernel version inconsistency between vmlinux and dumpfile crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c1bbc0 type: "current_task (per_cpu)" crash: page excluded: kernel virtual address: ffffffff81c232a4 type: "tss_struct ist array" $ And instead of the crash> prompt, I was back to the bash prompt. Does anyone know what I could do to figure out why that would be? Do I need to run crash on the original server (the crash docs seem to imply that's not necessary)? Anything else I could look for that might be useful? As far as I can tell the kernels match: $ strings vmcore |grep OSRELEASE OSRELEASE=2.6.32-358.11.1.el6.x86_64 --keith -- kkeller(a)wombat.san-francisco.ca.us

2 2

Best practices to setup XEN running on CentOS 6.4
by PhantomNet 04 Jul '13

04 Jul '13

Hi everyone, I'm looking for advice on the best way to setup the guest disks on a single-server XEN system running on a Centos 6.4 fresh minimal install as the dom0. I currently have a system running a traditional VHD disk image for each guest but I'm having disk I/O difficulties and I am looking to optimize it the best way I can. The host disks are two classic 500GB SATA-III drives running in software RAID. My question is what is the best way to set this type of system up? Using the VHD disks or a dedicated LVM partition? Ideally the host will run a few VM's, development, MySQL/Memcached, and Web Server utilities. My current planned disk layout is to have a host system running a raid'd root 20GB partition, leaving the rest for VM's. Should the remaining block be a complete LVM device and carve that up for VM's, or is there a better "accepted practice" for a setup like this? Thanks

1 0

Weird Okular/KDE error - thousand procs spawned
by Kwan Lowe 03 Jul '13

03 Jul '13

Hello all: I'm trying to troubleshoot a strange and repeatable error and not sure where to log the bug report. I subscribe to Linux Journal and download their PDF. The DLJ230.pdf opens in the Okular PDF reader from Konqueror. If I scroll down to the ad for some colo site (www.ovh.com) and click the right side of the page, I immediately start getting hundreds of alerts on the desktop. These all say: www.ovh.com contacted. Waiting for reply... Source: http://www.ovh.com/us/index.html They appear at the rate of about one per second. A "ps -ef" shows hundreds of new processes such as: kwan 27155 24731 0 18:21 ? 00:00:00 kdeinit4: kio_http [kdeinit] http local:/tmp/ksocket-kwan/klauncherT24732.s kwan 27169 24731 1 18:21 ? 00:00:00 kdeinit4: kio_http [kdeinit] http local:/tmp/ksocket-kwan/klauncherT24732.s kwan 27177 24731 1 18:21 ? 00:00:00 kdeinit4: kio_http [kdeinit] http local:/tmp/ksocket-kwan/klauncherT24732.s kwan 27184 24731 1 18:22 ? 00:00:00 kdeinit4: kio_http [kdeinit] http local:/tmp/ksocket-kwan/klauncherT24732. I let it run for a few minutes to see if it would time out but it just keeps growing until I finally kill all the kio_http procs (killall kio_http). It's reproducible on at least two CentOS 6.4 builds. Not sure if it's an Okular bug or something else.

1 0

Adding browsers
by Beartooth 03 Jul '13

03 Jul '13

Recently, I put CentOS 6.4 on one of the four PCs I keep behind a KVM switch. I like it a whole lot in most ways, but Fedora has spoiled me : I install almost every browser I can, and generally keep half a dozen or more open, mostly with several tens of tabs open. Iow, I use browsers as I used to use books, back in the Carboniferous when I had a desk in the stacks. Are there ways a subtechnoid can run Arora, Dillo, Epiphany, Konqueror, Midori, Kazehakase, Rekonq, Opera, and Pan on this CentOS -- without falling into the bad old pit of dependency hell? -- Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User Remember I have precious (very precious!) little idea where up is.

5 5

configuration of nagios
by Rolly Aquino 03 Jul '13

03 Jul '13

Hi Sir/Ma'am can i request for configuration of CentOS nagios for moniotoring our servers and switches thank you, rolly aquino

7 6

Re: [CentOS] what's wrong with dag.wieers?
by James B. Byrne 03 Jul '13

03 Jul '13

On Tue, July 2, 2013 17:34, John Hinton wrote: > I very much liked the rpmforge repo for many years. However, clamav > was one that I wasn't so happy with from them. It seems the > username would switch back and forth from clam to clamav to clam > to clamav and I would have a non-working version which I didn't > always know about. (log file wrong user permission problems) > Ditto here, and for the same reasons. > I switched the clamav install to epel and have had flawless success > with their packaging. It's easy to do excludes for various repos so > that you don't get conflicting installations. > > Rpmforge and Daz have done great work and I'm not meaning for this to > sound negative. It was just this one package. Maybe it was two > packagers switching the username depending on who did the update? > I don't know. This was our experience as well; changing userids between clam and clamav between updates caused us a lot of avoidable headaches. We switched to epel for clamav because of that one issue. Otherwise we have been very pleased with rpmforge. It will prove a great loss if there is a serious possibility that this resource might fade away. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

CentOS-announce Digest, Vol 101, Issue 2
by centos-announce-request＠centos.org 03 Jul '13

03 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1009 CentOS 6 libvirt Update (Johnny Hughes) 2. CEBA-2013:1008 CentOS 5 kvm Update (Johnny Hughes) 3. CEBA-2013:1005 CentOS 5 java-1.7.0-openjdk Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 2 Jul 2013 12:42:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1009 CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20130702124232.GA18215(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1009 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1009.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1cb09b38dc8962095cf6a3f3a01a92ddb831558a3559dfd26fd7e22337f9f240 libvirt-0.10.2-18.el6_4.9.i686.rpm e041a3f7b9314b531b32305f635d7a8f84e9f89c4c4a2f626900038393e35f01 libvirt-client-0.10.2-18.el6_4.9.i686.rpm add00b34b8902d6ca3e10308a3f120a69ec303da0ac73f92bd2457cb2ac35ca8 libvirt-devel-0.10.2-18.el6_4.9.i686.rpm f1181b2fe5e471b274fa438b876c0950074fe905dce1d602d6ec940f663e8656 libvirt-python-0.10.2-18.el6_4.9.i686.rpm x86_64: aa2cd0fd6b8f9a5b647794e9a60a4b76bb88e2bba75d3e52cfe153ef1aef40e9 libvirt-0.10.2-18.el6_4.9.x86_64.rpm e041a3f7b9314b531b32305f635d7a8f84e9f89c4c4a2f626900038393e35f01 libvirt-client-0.10.2-18.el6_4.9.i686.rpm 1783df219d2a93d626f540a78b5427297ba4c05fb41cb4178e17cccfb5ae5ace libvirt-client-0.10.2-18.el6_4.9.x86_64.rpm add00b34b8902d6ca3e10308a3f120a69ec303da0ac73f92bd2457cb2ac35ca8 libvirt-devel-0.10.2-18.el6_4.9.i686.rpm 5dffe787f71a71413eb18a91983ed3333b9fb49f4db3127bcd245138a5f1ef09 libvirt-devel-0.10.2-18.el6_4.9.x86_64.rpm 255cc37de0f7aa6c1b024bf4f3cdd1c3121e07f779982fe6660c99e46e0b4a65 libvirt-lock-sanlock-0.10.2-18.el6_4.9.x86_64.rpm d5d6d7645df575044d160787cb0ee013bcf1a025a5d6f3b5e7cb2949f2bd0e32 libvirt-python-0.10.2-18.el6_4.9.x86_64.rpm Source: 6e7341cc61f7bd7aea8b3739e6dc416badf43c5103fa37fc2294a5295cf2011b libvirt-0.10.2-18.el6_4.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 2 Jul 2013 13:09:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1008 CentOS 5 kvm Update To: centos-announce(a)centos.org Message-ID: <20130702130928.GA23946(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1008 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1008.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: c8d5d3f417b44635ebf2d2ea2fe1df1563758ea0653c77ab986feb5175781244 kmod-kvm-83-262.el5.centos.4.x86_64.rpm 61c3f1abbbf8a7cb7633cffd0913590dcb2a34f9abb067776e574c31da0f0020 kmod-kvm-debug-83-262.el5.centos.4.x86_64.rpm 339cc02eac8da3145140c8bf0e4296a9e83f4cd98a23c4a5d410acec7005c963 kvm-83-262.el5.centos.4.x86_64.rpm 2d1c450b2e18f9ab7b865d44ad63a260bec7ec386bae3ba8801820499eddb1ee kvm-qemu-img-83-262.el5.centos.4.x86_64.rpm a72691c081d7e6ad8d422a384458cbfb18df5f29c81fc38c5d076db8b0c5e060 kvm-tools-83-262.el5.centos.4.x86_64.rpm Source: 10b69241efd3982413c68fb60c20f16cb4d899c1a874cfea32465f84c32c5aa5 kvm-83-262.el5.centos.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 2 Jul 2013 13:54:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1005 CentOS 5 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20130702135455.GA25682(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1005 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1005.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9d17569796def4010bd405895ac4a0b43e2ee252ec2125cf7989d636edd5200c java-1.7.0-openjdk-1.7.0.25-2.3.10.5.el5_9.i386.rpm 4ebf93eb886509cb8f2c59639055d5d9fefe82d886eee51732e5a738bacdeb8f java-1.7.0-openjdk-demo-1.7.0.25-2.3.10.5.el5_9.i386.rpm 4e3316441132863793d8d73d27b0b4e9eb70c2521c399b4957ab23dcc4ec4c67 java-1.7.0-openjdk-devel-1.7.0.25-2.3.10.5.el5_9.i386.rpm a80b037ae16faca27af104c007b774a3f9fac466bde6bfc89fd230568ab9835a java-1.7.0-openjdk-javadoc-1.7.0.25-2.3.10.5.el5_9.i386.rpm 5fe489f7fb354e3d54aa8b5de777e098213984a8d21bd3d7121715a2a143a9f1 java-1.7.0-openjdk-src-1.7.0.25-2.3.10.5.el5_9.i386.rpm x86_64: 7ce3f7d53964bc7fbb319ed27e2112edff47042f5ddbe38ee7feb3ec6a657970 java-1.7.0-openjdk-1.7.0.25-2.3.10.5.el5_9.x86_64.rpm 7f8657674c3d5e5887baa989f5f6134e20a702b8dbb154cba156e22a985e7c7e java-1.7.0-openjdk-demo-1.7.0.25-2.3.10.5.el5_9.x86_64.rpm b72951dab6688fd09907f0f43b1cb5d1ec1557ec17ffcf0c2300fda0cbf974b8 java-1.7.0-openjdk-devel-1.7.0.25-2.3.10.5.el5_9.x86_64.rpm 630261ac5ff904ca5a17fafbc448d918e65c6dbfc901602e2cd3643968d5de25 java-1.7.0-openjdk-javadoc-1.7.0.25-2.3.10.5.el5_9.x86_64.rpm c114987ad1a7ac86d45ea92cc99de6a27ae9d3bfd760fa4d7271afde93102601 java-1.7.0-openjdk-src-1.7.0.25-2.3.10.5.el5_9.x86_64.rpm Source: 383a6c52914abb39a2e27751ef51b1896df89d0fa399cd0d3bf48b1d16830eb2 java-1.7.0-openjdk-1.7.0.25-2.3.10.5.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 2 ***********************************************

1 0

Centos 6.4, bnx2 in promiscuous mode does not see packets
by Giles Coochey 03 Jul '13

03 Jul '13

Hi, I hope someone can help me, I cannot seem to get a system's ethernet interface to correctly work in promiscuous mode... I have a Centos 6.4 system with 2 bnx2 interfaces on it. I have set up eth1 in promiscuous mode and am sending traffic to it using the port mirroring configuration on a Nortel 3510-24T switch. The switch reports that it is sending a fair amount of traffic to the mirror port. However, within Centos 6.4, I only see broadcast traffic from the switch: [root@host eth1]# ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:19:B9:E2:30:AE UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:75 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4800 (4.6 KiB) TX bytes:0 (0.0 b) I have tried various options configuring eth1 via /etc/sysconfig/networking/devices/ifcfg-eth1 Currently it looks like this: DEVICE=eth1 BOOTPROTO=static HWADDR=00:19:B9:E2:30:AE #NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet #UUID="e753ec9b-fc35-4460-bcd1-87f26f8d1553" IPV6INIT=no USERCTL=no PROMISC=yes I have also tried to manually put the interface in promiscuous mode (as I think PROMISC=yes is deprecated): ifconfig eth1 promisc It shows as being in promiscuous mode via ifconfig... The relevant parks of bootup / system messages: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012) bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:e2:30:ac bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw bnx2 0000:09:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:e2:30:ae bnx2 0000:05:00.0: irq 95 for MSI/MSI-X bnx2 0000:05:00.0: eth0: using MSI bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex bnx2 0000:09:00.0: irq 96 for MSI/MSI-X bnx2 0000:09:00.0: eth1: using MSI bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bnx2 0000:05:00.0: irq 95 for MSI/MSI-X bnx2 0000:05:00.0: eth0: using MSI bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex bnx2 0000:09:00.0: irq 96 for MSI/MSI-X bnx2 0000:09:00.0: eth1: using MSI bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON Does anyone have any ideas? Thanks Giles

1 1

what's wrong with dag.wieers?
by Adrian P. van Bloois 02 Jul '13

02 Jul '13

Hi, What happened to dag.wieers? There is an update for clamav but the rpm is still not distibuted after 4 weeks or more. :-) What's wrong there? Adrian -- Adri P. van Bloois Antonlaan 104 email: adrian(a)pa0rda.nl 3701 VG Zeist voice: +31-(0)-30-6912741 The Netherlands fax: NONE 52 05'15.77"N 5 4'44.56"E QTH-locater JO 22 OC The whole point of cooking is to get as much flavour out of the ingredients as possible. -- Delia Smith

5 4

Re: [CentOS] DL380g8 - smart array B320i - CentOS 6.4
by James B. Byrne 02 Jul '13

02 Jul '13

On Mon, July 1, 2013 14:03, John R Pierce wrote: > On 7/1/2013 10:57 AM, Nathan Duehr wrote: >> DRM'ed server hardware. Pure evil. > > why is that evil? why should you pay for features you're not using? > Actually, firmware control of system features has been part of HPQ's business practice for as long as I can remember. The HP3000 series of MPE/iX mini computers ran on exactly the same hardware as the HP9000 HP-UX systems, but were priced considerably higher than their HP9000 equivalents. However, one could not simply run MPE/iX on the HP9000 hardware. One had to pay HPQ to come in and run a system utility that reset a flag on the processor to enable that. On the other hand, one could run HP-UX on the HP3000 hardware without requiring any changes. A similar thing applied to processor speeds. HPQ would typically release a family of HP3000/HP9000 processors that differed only in speed. The trick was all the processors in the family were identical other than the firmware settings. The processing speed was throttled by firmware switches that one could pay HPQ to turn off in order to increase usable processor cycles. As far as I could ever discover the clock speed was constant so one paid the same for the electricity and a/c whether one had the lowest or the highest processor speed. Mind you, we no longer deal with HPQ or employ any of their hardware because of these and similar experiences. In fact, HPQ's business practices are what turned our firm over to FOSS and commodity hardware in the first instance (after using HPQ exclusively for 20+ years). Poisoning the well so to speak for any other name brand vendor. Nice gear; company, not so much. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

Steam for Linux Fedora 17 -> CentOS 6.x
by Ljubomir Ljubojevic 02 Jul '13

02 Jul '13

Can somebody contact "Spot" and ask him if Steam for Linux can be compiled on CentOS 6.x? http://spot.fedorapeople.org/steam/ or will someone try it from src rpm's (same folder)? or is someone willing to take over building the rpm the old fashioned way from https://github.com/xvitaly/steamrpm ? I am to relocate to another town for new job and can not afford the spare time :-/ -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant

5 5

DL380g8 - smart array B320i - CentOS 6.4
by Sergio Alex 02 Jul '13

02 Jul '13

Gostaria de instalar o Centos 6.4 em um dl380e g8 com uma smart array b320i, na instalação não possui drives por isso aparece que não há discos disponíveis, baixei os drives para red hat .dd do site da HP, como poderia carregar esses drives durante a instalação? gravei eles em um pen drive. Obrigado. -- Sergio.Alex

12 18

CentOS-announce Digest, Vol 101, Issue 1
by centos-announce-request＠centos.org 02 Jul '13

02 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1004 CentOS 6 java-1.7.0-openjdk Update (Johnny Hughes) 2. CEBA-2013:0739 CentOS 6 bind-dyndb-ldap Update (Johnny Hughes) 3. CEEA-2013:1007 CentOS 6 resource-agents Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 1 Jul 2013 17:53:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1004 CentOS 6 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20130701175316.GA46104(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1004 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1004.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 494da8188580aecf2741a2990b9b25af329f3cec0d8993ce992fe93ba64f0ebe java-1.7.0-openjdk-1.7.0.25-2.3.10.4.el6_4.i686.rpm dd1213274089ae43c7b4beb9cf4cb1b9ec07acf47a4e3fbcfeb99f47628b462a java-1.7.0-openjdk-demo-1.7.0.25-2.3.10.4.el6_4.i686.rpm 0e0419262b08e8c332e4136aa0c0458454ed69dbd3075a95b6b8b1c2fd3f1b22 java-1.7.0-openjdk-devel-1.7.0.25-2.3.10.4.el6_4.i686.rpm c86a1c937047a8c69f5c7d359fb4fa848be7c3bb8d351b387fded68329e0320d java-1.7.0-openjdk-javadoc-1.7.0.25-2.3.10.4.el6_4.noarch.rpm e9b1e541d5bd59889edde02000ee39f775e2fc11e09495733cb2d0745c73ce30 java-1.7.0-openjdk-src-1.7.0.25-2.3.10.4.el6_4.i686.rpm x86_64: fd81023676da2b1a0cfbe120f9bf85a071b01402d7951a3e4bc89b32893df552 java-1.7.0-openjdk-1.7.0.25-2.3.10.4.el6_4.x86_64.rpm 40e9440ea75d178efdb7556db4c185bbf8c7003df5caf730eda16a228b5e0e06 java-1.7.0-openjdk-demo-1.7.0.25-2.3.10.4.el6_4.x86_64.rpm 2107911d4991ba9d8453f956e2f815d54bcd10b16512092683f99c4205d45d8c java-1.7.0-openjdk-devel-1.7.0.25-2.3.10.4.el6_4.x86_64.rpm c86a1c937047a8c69f5c7d359fb4fa848be7c3bb8d351b387fded68329e0320d java-1.7.0-openjdk-javadoc-1.7.0.25-2.3.10.4.el6_4.noarch.rpm 28979f54d44e0abd09ac72e8c54bf9b82f25ee267b1cfccec71aa5f881cdf575 java-1.7.0-openjdk-src-1.7.0.25-2.3.10.4.el6_4.x86_64.rpm Source: a054f1009f76109035be1178e3a8e0cf297b5840f99a4671b5d2e26b369c7e2e java-1.7.0-openjdk-1.7.0.25-2.3.10.4.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 1 Jul 2013 17:54:10 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0739 CentOS 6 bind-dyndb-ldap Update To: centos-announce(a)centos.org Message-ID: <20130701175410.GA46359(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0739 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0739.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d69403f7649804d2fcf9106672a45f98f0e46fb461447ef643d4fa0807609177 bind-dyndb-ldap-2.3-2.el6_4.1.i686.rpm x86_64: 7973907a2ce55383fa09a21e4e6097bbbb0b6feb63e2de8870b0c8f6260aad67 bind-dyndb-ldap-2.3-2.el6_4.1.x86_64.rpm Source: 0e05a97d5ae2a6d59b000fb0770502f660a081df380808595cd97db7a7ca8bb4 bind-dyndb-ldap-2.3-2.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 1 Jul 2013 17:54:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1007 CentOS 6 resource-agents Update To: centos-announce(a)centos.org Message-ID: <20130701175442.GA46583(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1007 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1007.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 081617fb7ccd5da896876579fbf350c34fbe09d86d5ba10979a0dc90e9bbbc89 resource-agents-3.9.2-21.el6_4.3.i686.rpm x86_64: 142f54f22e8a83f450cab39b923cf8540c6de09c2daeec59f85b06fda7b4ecfd resource-agents-3.9.2-21.el6_4.3.x86_64.rpm Source: 4c26ef88b130f4423acd6871fb923712eca206c736ac2e4b0fec49341614b508 resource-agents-3.9.2-21.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 1 ***********************************************

1 0

Re: [CentOS] Yum hangs while doing anything (FIXED)
by ken 01 Jul '13

01 Jul '13

On 07/01/2013 05:52 PM Eero Volotinen wrote: > is this fixing the issue: > > http://fedoranews.org/alex/tutorial/rpm/16.shtml I couldn't read any web pages because I shut down firefox hours ago (thinking I was upgrading it) and then it (the older version) wouldn't start again. But then I just solved the yum problem, upgraded several apps (including firefox) and the new firefox is working now. All I did was put the original /var/lib/rpm/Packages file back where it was. (If you read from a post from earlier today, I mv'd off this file and then ran rpm --rebuild to recreate it. This fixed the problem with yum hanging, but then I was getting crazy error messages from yum and from rpm.) Something told me to put the original Packages file back where it was, I did, and now yum works again. And the just-upgraded firefox works too. Thanks to you and everyone else who responded. I have to say, I still don't know what caused the problem in the first place. But sometimes things just have to be a mystery.

1 0

Dovecot SLOW with sssd in centos 6
by FABIO FERRARI 01 Jul '13

01 Jul '13

Hello, I have a big performance problem with a mail server using dovecot and authenticating users via ldap. The architecture of the machine is a local ldap and mysql server, they are used by dovecot for authenticating the mail users. If i use pam_sss the mail server has about 1/8 - 1/10 the performances it has if i use the pam_ldap. Even doing a 'time ls -l' on the mail tree (there are about 3000 ldap users in that directory) it is very very slow, the first time I try to do it after a reboot, it takes about 6 minutes with sssd, and about 8 seconds with ldap. Since I know sssd is recommended, anyone knows that there is anything in configuration I can try to increase the speed, avoiding me to use the old pam_ldap module? thanks in advance, Fabio Ferrari

3 2

Yum hangs while doing update
by ken 01 Jul '13

01 Jul '13

About thirty minutes ago I started an update. Everything downloaded fine. But when it came to "Running Transaction", it hung: .... Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Updating : xulrunner 1/18 And there it sits still. There's plenty of disk space. The load on the CPU is under 1.0. There is some disk activity, but no way so much as to cause anything to hang and no major writing related to yum. Disk reads are just about null, except just now when I grep'ed for something to make sure that the disk could be read. I'm not using even half of the available RAM. Anyone else run into this problem?

3 10

Re: [CentOS] DL380g8 - smart array B320i - CentOS 6.4
by Nathan Duehr 01 Jul '13

01 Jul '13

On Jul 1, 2013, at 12:43 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > > Am 01.07.2013 20:30, schrieb Nathan Duehr: >> The significant problem we ran into was someone at an upstream vendor orders HP stuff via >> individual part numbers in a specific configuration for us, so we get a server, some disks, >> whatever... and assemble them on-site. They didn't know (bad vendor, no donut) about the >> change or spaced it... and didn't send licenses... so you're sitting there with disks in a >> new server, all ready to load the OS as usual... and the OS can't find any disks > > *you* are resposible to hire a *qualified* and *certified* HP partner and not the > cheapest idiot company you are able to find I'd love to tell you who it is, but I'm not at liberty to say. Suffice it to say, everyone on this list knows their name, and they're not exactly a small VAR. Your assumptions are unfounded. Like at most companies, the purchasing folks are as far removed from the actual server operations/build folks that there's a complete disconnect anyway... I could talk to the wall as well as I could specify a vendor. They're pizza boxes. > our HP partner does *any* communication with HP for us as well as watching > that all neded licenses are re-newed before they are running out > > that is why they are certified gold partner and if your's is and does > not work like one it is *up to you* to intervene at HP so your vendor > is losing his gold-partner status They are, and I disagree. HP plays games with vendors and customers, they just deserve to lose them. I have better things to do with my time than tattle-tale on a VAR who's not keeping up on the metric ton of horsepucky coming from HP on what aren't really even high-end servers. Hey, if they want to play hardware licensing games on a giant blade server, okay... no biggie. These are pizza boxes that are literally less than $1000/ea in quantity. Over-engineering them to garner an extra couple hundred bucks to turn on hard disks, is a game... a game by a company not interested or not paying attention to what customers actually use these for... commodity hardware built by a large brand name with the ability to show up the SAME DAY with replacement parts. Otherwise, we'd all just buy the stuff at MicroCenter and let stuff fall out of the cluster as it croaked... the DL360/DL380 series, ain't high-end stuff by a large stretch. > if he does not have you are the fool responsible to hire the wrong one > > hint: no they are not expensive if you have a serious business and > work with the principle "live and let live", ours and his techs > after a few years became *real* friends with a lot of specific > knowledge and if you give them the feeling you would like to > have all for no money it's your fault and you are not a serious > business We get along fine with our VAR, and they've changed how they order those machines now... but HP's silly hardware licensing games are HP's self-created problem, which trickles down to the VARs. That can't be blamed on the VAR. They have hundreds of other vendor's products to keep up with, too. These are the types of cheap servers that the admin has always just TURNED ON THE SERVER AND USED IT. It's a pizza box. It isn't a mid-range HP-UX machine. It definitely isn't a Sun box. The rest of your snotty response and assumptions about the business, have been summarily ignored. Mostly because... a) Hey, it's a sysadmin job and the company is what it is. I've now been through something like 15 companies in my fairly long career (if you want to call it that), since before any company on the planet was using Linux... and some are good, some are bad. It has nothing to do with my opinion of a dumb feature added to cheap pizza box servers. b) Attacking people by claiming their company is somehow bad on a public mailing list is a great way to have your resume' find the round file immediately as soon as anyone recognizes your name on it from the tech lists. Sheesh. c) You're boring me to death. Feel free to say you like the new HP licensing features of their commodity cheap hardware, or you don't. I don't care what you think of any particular company practice here, or our choice of VAR. I *suspect* the person who posted just got the same surprise we did the first time it happened. Here's the kind of stuff people do with pizza boxes... 1. Open box, throw away (oh, I forgot... need to be PC... "recycle") cardboard. 2. Install drives and check nothing got unseated in shipping. 3. Boot and install OS from server or media with automated scripts/etc. 4. Shove in rack at datacenter and let it soak for a couple of days for infant mortality. 5. Send traffic to it and make money with it. HP added: 2a. Go find paperwork from purchasing department or stuffed in one of the many boxes with a pile of new servers to find some stupid license key and type it into BIOS. It's a complete waste of time for such low-end hardware and how most people use it. You ... may enjoy the additional silly step designed to annoy and garner a couple hundred more bucks from you, at your pleasure. The rest of your misguided opinions, as I said, will be summarily ignored. My initial response to the thread was curt and to the point and covered why HP servers now do this, succinctly. And IMHO, accurately. I wish you good tidings, and may you always be the smartest person with the "Best l33t GOLD level VAR EVAR !!1!" LOL... (just a note: I remember when there were no such things as "service levels"... you bought a server, the company would send you caviar and roses and wipe your butt just because you called, because servers were EXPENSIVE... the world got rid of/over that, a LONG time ago... just repeat after me... commodity hardware... commodity hardware... commodity hardware... I'm not saying I LIKE it, but hey... virtual farms and what-not... no one needs a pizza box acting all uppity like it's important in the grand scheme of the data center these days... servers that need things typed into the BIOS to find their hard drives... are dumb. Period.) Nate

5 4

Re: [CentOS] Yum hangs while doing update
by ken 01 Jul '13

01 Jul '13

On 07/01/2013 01:21 PM Reindl Harald wrote: > Am 01.07.2013 19:16, schrieb ken: >> About thirty minutes ago I started an update. Everything downloaded >> fine. But when it came to "Running Transaction", it hung: >> >> Running rpm_check_debug >> Running Transaction Test >> Finished Transaction Test >> Transaction Test Succeeded >> Running Transaction >> Updating : xulrunner >> 1/18 >> >> And there it sits still. >> >> There's plenty of disk space. The load on the CPU is under 1.0. There >> is some disk activity, but no way so much as to cause anything to hang >> and no major writing related to yum. Disk reads are just about null, >> except just now when I grep'ed for something to make sure that the disk >> could be read. I'm not using even half of the available RAM > > what about look in dmesg and/or /var/log/messages? > No. Nothing relevant there.

4 10

Re: [CentOS] Yum errors
by me＠tdiehl.org 01 Jul '13

01 Jul '13

On Mon, 1 Jul 2013, Reindl Harald wrote: > > > Am 01.07.2013 15:36, schrieb me(a)tdiehl.org: >> I have a c6.4 machine that recently had some file system corruption. fsck was able >> repair the file system but I am getting the following error when I try to >> do yum update: >> >> [Errno 21] Is a directory: '/var/lib/yum/yumdb/e/2f883c08e3b596b66fcc19c6b4d73b11c9aaa43e-e2fsprogs-1.41.12-14.el6_4.2-x86_64/checksum_type' >> >> In searching Google, some suggested renaming the yumdb but that just results >> in a traceback when I run yum > > you can do *without any issue* > > rm -rf /var/lib/yum/yumdb/* > rm -rf /var/lib/yum/history/* > > and after *twice* "yum history new" there are no longer tracebacks > been there, done that on a *lot* of machines multiple times to > get rid of this tons of old metadata with no benefit Ok, I am still getting a traceback, obviously, the first traceback is expected but the last one os not. Below is what I did: (router pts4) # cd /var/lib/yum/ (router pts4) # rm -r history/ yumdb/ (router pts4) # ll total 12 drwxr-xr-x. 3 root root 4096 May 6 11:31 repos drwxr-xr-x. 3 root root 4096 Jun 29 14:14 rpmdb-indexes -rw-r--r--. 1 root root 36 May 6 11:31 uuid (router pts4) # yum history new Loaded plugins: downloadonly, fastestmirror, security Traceback (most recent call last): File "/usr/bin/yum", line 29, in <module> yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 285, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 136, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 438, in doCommands return self.yum_cli_commands[self.basecmd].doCommand(self, self.basecmd, self.extcmds) File "/usr/share/yum-cli/yumcommands.py", line 1503, in doCommand ret = self._hcmd_new(base, extcmds) File "/usr/share/yum-cli/yumcommands.py", line 1423, in _hcmd_new base.history._create_db_file() File "/usr/lib/python2.6/site-packages/yum/history.py", line 1645, in _create_db_file cur.execute(op) sqlite3.OperationalError: table trans_beg already exists (router pts4) # yum history new Loaded plugins: downloadonly, fastestmirror, security history new (router pts4) # yum update Loaded plugins: downloadonly, fastestmirror, security Loading mirror speeds from cached hostfile * elrepo: elrepo.org Setting up Update Process Traceback (most recent call last): File "/usr/bin/yum", line 29, in <module> yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 285, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 136, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 438, in doCommands return self.yum_cli_commands[self.basecmd].doCommand(self, self.basecmd, self.extcmds) File "/usr/share/yum-cli/yumcommands.py", line 232, in doCommand return base.updatePkgs(extcmds, update_to=(basecmd == 'update-to')) File "/usr/share/yum-cli/cli.py", line 725, in updatePkgs self.update() File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 3735, in update updates = self.up.getUpdatesTuples() File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 906, in <lambda> up = property(fget=lambda self: self._getUpdates(), File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 726, in _getUpdates self._up = rpmUtils.updates.Updates(self.rpmdb.simplePkgList(), self.pkgSack.simplePkgList()) File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 502, in simplePkgList return self.pkglist File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 232, in _get_pkglist csumpkgtups = self.preloadPackageChecksums(load_packages=False) File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 979, in preloadPackageChecksums rpmdbv = self.simpleVersion(main_only=True)[0] File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 1163, in simpleVersion self._put_cached_simpleVersion_main(main) File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 1112, in _put_cached_simpleVersion_main os.rename(rpmdbvfname + ".tmp", rpmdbvfname) OSError: [Errno 21] Is a directory (router pts4) # As you can see, I am still getting the traceback. I also ran the following to be sure I was not missing something else: (router pts4) # rpm -qf /var/lib/yum yum-3.2.29-40.el6.centos.noarch (router pts4) # rpm -V yum (router pts4) # Any ideas what I am missing? Regards, -- Tom me(a)tdiehl.org Spamtrap address me123(a)tdiehl.org

3 3

Re: [CentOS] Yum errors
by me＠tdiehl.org 01 Jul '13

01 Jul '13

On Mon, 1 Jul 2013, Reindl Harald wrote: > > > Am 01.07.2013 15:36, schrieb me(a)tdiehl.org: >> I have a machine that recently had some file system corruption. fsck was able >> repair the file system but I am getting the following error when I try to >> do yum update: >> >> [Errno 21] Is a directory: '/var/lib/yum/yumdb/e/2f883c08e3b596b66fcc19c6b4d73b11c9aaa43e-e2fsprogs-1.41.12-14.el6_4.2-x86_64/checksum_type' >> >> In searching Google, some suggested renaming the yumdb but that just results >> in a traceback when I run yum > > you can do *without any issue* > > rm -rf /var/lib/yum/yumdb/* > rm -rf /var/lib/yum/history/* > > and after *twice* "yum history new" there are no longer tracebacks > been there, done that on a *lot* of machines mutiple times to > get rid of this tons of old metadata with no benefit > > After doing a little more poking around, I moved /var/lib/yum/rpmdb-indexes out of the way and the issue seems to be solved. Yum seems to have recreated that directory and appears happy now. Does anyone know of a downside to doing this? Regards, -- Tom me(a)tdiehl.org Spamtrap address me123(a)tdiehl.org

1 0

Yum errors
by me＠tdiehl.org 01 Jul '13

01 Jul '13

Hi, I have a machine that recently had some file system corruption. fsck was able repair the file system but I am getting the following error when I try to do yum update: [Errno 21] Is a directory: '/var/lib/yum/yumdb/e/2f883c08e3b596b66fcc19c6b4d73b11c9aaa43e-e2fsprogs-1.41.12-14.el6_4.2-x86_64/checksum_type' In searching Google, some suggested renaming the yumdb but that just results in a traceback when I run yum. There are some files in lost+found but I am not sure what the above file should look like and inode numbers are not useful to me. Anyone have an idea how to fix this without reloading the machine? Regards, -- Tom me(a)tdiehl.org Spamtrap address me123(a)tdiehl.org

2 1

Setting up dovecot under CentOS-6.4
by Timothy Murphy 30 Jun '13

30 Jun '13

I want to set up dovecot on a CentOS server. I did this before, some time ago, but it seems to have become much more complicated, involving postfix, amavisd-new and clamav (for spamassassin). What puzzles me is the role, if any, of procmail and .procmailrc in this new system. Is procmail no longer used/needed? -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

2 2

CentOS-announce Digest, Vol 100, Issue 14
by centos-announce-request＠centos.org 30 Jun '13

30 Jun '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1003 CentOS 6 sysvinit FASTTRACK Update (Johnny Hughes) 2. CEBA-2013:1002 CentOS 6 system-config-users-docs FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sun, 30 Jun 2013 01:08:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1003 CentOS 6 sysvinit FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130630010833.GA16769(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1003 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1003.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8b79e3d6537dcdd1e5a3fd7f10499e8b41fad608ece91d828fa5759b192cdc96 sysvinit-tools-2.87-5.dsf.el6.i686.rpm x86_64: e835dea1b3bbf2ae99f22fe0e427d519f09d4c5065bcb6cfe27e513230acce92 sysvinit-tools-2.87-5.dsf.el6.x86_64.rpm Source: bfcef5e9d4cf9a2db4f9b4f57463c1ad4a1f8b3f242f24871ebb9b6a6ceea202 sysvinit-2.87-5.dsf.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Sun, 30 Jun 2013 01:08:49 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1002 CentOS 6 system-config-users-docs FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130630010849.GA16850(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1002 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1002.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bb69bcab8ee4a6dacc319970d7b3ff8b80cb74d0e3e2de6609bd22abb75a30fa system-config-users-docs-1.0.8-2.el6.noarch.rpm x86_64: bb69bcab8ee4a6dacc319970d7b3ff8b80cb74d0e3e2de6609bd22abb75a30fa system-config-users-docs-1.0.8-2.el6.noarch.rpm Source: ca7dd10e963a78e03362c1a3537ca253afcbbeffe3b5024426609fb1d4523f89 system-config-users-docs-1.0.8-2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 100, Issue 14 ************************************************

1 0

Re: [CentOS] centos 6.4 samba password sync problem
by Krzysztof Szarlej 30 Jun '13

30 Jun '13

you are suggesting that i cant find in logs any info about declared passwd program? i would be very thankfull for some feedback about syncing. still trying to do it but i ran out of ideas already. 2013/6/30 Reindl Harald <h.reindl(a)thelounge.net> > > > Am 30.06.2013 02:20, schrieb Krzysztof Szarlej: > > I have a problem with unix-samba password sync. It just doesnt work, > when i > > use smbpasswd it changes only samba password, and not the unix password. > In > > logs i cant find any error about passwd. Samba ver is 3.6.9-151 > > so what - they are independent since forever > otherwise "smbpasswd" would not be needed at all > >

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss