- Discuss - lists.centos.org

Centos6.4 routing problem
by Johan Vermeulen 05 Jun '13

05 Jun '13

dear All, I'm facing this routing problem, the setup is actualy part of ltsp, but I think this problem is Centos-specific. The server is a Dell Poweredge R210. The install is standard 6.4, updated. I have one nic facing the public internet: vi /etc/sysconfig/network-scripts/ifcfg-em1 DEVICE=em1 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2b NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet UUID="cdfe1d58-c56c-47fc-8a93-5df2e168d176" IPV6INIT=no USERCTL=no DNS2=195.238.2.22 DNS1=192.168.66.1 IPADDR=192.168.66.5 NETMASK=255.255.255.128 GATEWAY=192.168.66.1 and one nic serving the lan and dhpcd. vi /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2c NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet UUID="e72a17b6-fb5f-43f0-9136-fa4d92b542ae" IPADDR=192.168.70.129 NETMASK=255.255.255.128 IPV6INIT=no USERCTL=no in iptables, prerouting and masquerading are configured : # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth+ -j MASQUERADE -A POSTROUTING -o em2 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth+ -j ACCEPT -A INPUT -i em2 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth+ -j ACCEPT -A FORWARD -i em2 -j ACCEPT -A FORWARD -o eth+ -j ACCEPT -A FORWARD -o em2 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT and in /etc/sysctl.conf ipforwarding is set to 1 # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 1 clients get ip adresses from dhcp server, and there's no other dhcp server on the lan. But clients cannot ping the public internet, e.g. 8.8.8.8 the only EM I'm seeing is when executing command : [root@centoshofkwartier ~]# sysctl -p /etc/sysctl.conf net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 I switched the cables and switches, and changed the connection with the public internet. Can anybody offer some advise on this? Greetings, J. -- Johan Vermeulen IT-medewerker Caw De Kempen Opensource Software is the future.

5 7

Re: [CentOS] Centos6.4 routing problem
by Bonnie Mtengwa 05 Jun '13

05 Jun '13

Sent from my HTC ----- Reply message ----- From: "Johan Vermeulen" <jvermeulen(a)cawdekempen.be> To: "CentOS mailing list" <centos(a)centos.org> Subject: [CentOS] Centos6.4 routing problem Date: Tue, Jun 4, 2013 16:13 hello Mark, thanks for the help. Op 04-06-13 15:56, m.roth(a)5-cent.us schreef: > Johan Vermeulen wrote: >> dear All, >> >> I'm facing this routing problem, the setup is actualy part of ltsp, but >> I think this problem is Centos-specific. >> >> The server is a Dell Poweredge R210. The install is standard 6.4, updated. >> >> I have one nic facing the public internet: >> > First, we always have BOOTPROTO set - in your case, assuming you're > getting em1's IP from DHCP, you should have that; in the case of em2, it's > BOOTPROTO=static. As it is, I'd think (without testing) that em1 is trying > to present a reserved IP to the 'Net, which is a no-no. both ifcfg's now have BOOTPROTO=static and I restarted network and dhcpd. > >> vi /etc/sysconfig/network-scripts/ifcfg-em1 >> >> DEVICE=em1 >> BOOTPROTO=none >> HWADDR=d4:ae:52:c1:28:2b >> NM_CONTROLLED=no >> ONBOOT=yes >> TYPE=Ethernet >> UUID="cdfe1d58-c56c-47fc-8a93-5df2e168d176" >> IPV6INIT=no >> USERCTL=no >> DNS2=195.238.2.22 >> DNS1=192.168.66.1 >> IPADDR=192.168.66.5 >> NETMASK=255.255.255.128 >> GATEWAY=192.168.66.1 >> >> and one nic serving the lan and dhpcd. >> >> vi /etc/sysconfig/network-scripts/ifcfg-em2 >> >> DEVICE=em2 >> BOOTPROTO=none >> HWADDR=d4:ae:52:c1:28:2c >> NM_CONTROLLED=no >> ONBOOT=yes >> TYPE=Ethernet >> UUID="e72a17b6-fb5f-43f0-9136-fa4d92b542ae" >> IPADDR=192.168.70.129 >> NETMASK=255.255.255.128 >> IPV6INIT=no >> USERCTL=no > <snip> > Secondly, what does route show? > > mark > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos [root@centoshofkwartier ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.70.128 * 255.255.255.128 U 0 0 0 em2 192.168.66.0 * 255.255.255.128 U 0 0 0 em1 link-local * 255.255.0.0 U 1002 0 0 em1 link-local * 255.255.0.0 U 1003 0 0 em2 default 192.168.66.1 0.0.0.0 UG 0 0 0 em1 greetings, J. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

CentOS-announce Digest, Vol 100, Issue 1
by centos-announce-request＠centos.org 04 Jun '13

04 Jun '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0892 CentOS 5 rgmanager Update (Johnny Hughes) 2. CEBA-2013:0891 CentOS 6 setuptool FASTTRACK Update (Johnny Hughes) 3. CEBA-2013:0893 CentOS 6 selinux-policy Update (Johnny Hughes) 4. CESA-2013:0898 Moderate CentOS 5 mesa Update (Johnny Hughes) 5. CESA-2013:0897 Important CentOS 6 mesa Update (Johnny Hughes) 6. CESA-2013:0896 Moderate CentOS 6 qemu-kvm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 3 Jun 2013 11:48:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0892 CentOS 5 rgmanager Update To: centos-announce(a)centos.org Message-ID: <20130603114818.GA27622(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0892 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9990c86eb1cbcef8237cce912d59b4e2758e8473a85d70de068e51e2348cdc0f rgmanager-2.0.52-37.el5.centos.3.i386.rpm x86_64: e8d6e01befd489b81022b98d2ffcb7b96b3a2cc8666fd5eb632d09bb4ab1d763 rgmanager-2.0.52-37.el5.centos.3.x86_64.rpm Source: 276c23ce42ca75b3dd2f25ee0e57b21024142a188a20bf7f2a06a1e1f44c7700 rgmanager-2.0.52-37.el5.centos.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 3 Jun 2013 12:34:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0891 CentOS 6 setuptool FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130603123431.GA53208(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0891 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0891.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 36446fd8595d5da4756548ddee55c2d6cea5276a2f4f7598d6fd260cd289d45c setuptool-1.19.9-4.el6.i686.rpm x86_64: e5784303d1779bc601a30eceb4621e27cb08a566c9aaa26edaa4ea1dd7ee8e25 setuptool-1.19.9-4.el6.x86_64.rpm Source: c3bd69242b65f88995c3b7395c1fd2088b366c07fcbef24b14e82b5c14789ca9 setuptool-1.19.9-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 3 Jun 2013 12:34:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0893 CentOS 6 selinux-policy Update To: centos-announce(a)centos.org Message-ID: <20130603123448.GA53327(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0893 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0893.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ed2e81c6e49bc95e9fc856e56ef5d556ce01a8320da3ddc473e93dc080d10f38 selinux-policy-3.7.19-195.el6_4.6.noarch.rpm ca73161d06dfc52932895e0e09f35ba0edece97ef152a61fd13c51c659a14fe5 selinux-policy-doc-3.7.19-195.el6_4.6.noarch.rpm 26bdf1b81f9cab8776559f7c5dfc3e35934c9d47ea7c0b7810e5e5401745dd74 selinux-policy-minimum-3.7.19-195.el6_4.6.noarch.rpm 9b49abbe0a66c428af17f494ae1caaadccc5330e805848d73d5a0b39d8859b1a selinux-policy-mls-3.7.19-195.el6_4.6.noarch.rpm a4d07b07952cd24b2f9265801ce215d4a5925aebb8560788c15471f30871ef4e selinux-policy-targeted-3.7.19-195.el6_4.6.noarch.rpm x86_64: ed2e81c6e49bc95e9fc856e56ef5d556ce01a8320da3ddc473e93dc080d10f38 selinux-policy-3.7.19-195.el6_4.6.noarch.rpm ca73161d06dfc52932895e0e09f35ba0edece97ef152a61fd13c51c659a14fe5 selinux-policy-doc-3.7.19-195.el6_4.6.noarch.rpm 26bdf1b81f9cab8776559f7c5dfc3e35934c9d47ea7c0b7810e5e5401745dd74 selinux-policy-minimum-3.7.19-195.el6_4.6.noarch.rpm 9b49abbe0a66c428af17f494ae1caaadccc5330e805848d73d5a0b39d8859b1a selinux-policy-mls-3.7.19-195.el6_4.6.noarch.rpm a4d07b07952cd24b2f9265801ce215d4a5925aebb8560788c15471f30871ef4e selinux-policy-targeted-3.7.19-195.el6_4.6.noarch.rpm Source: 79646b7d323685762c33a61b26648937de05ea39317ff41acfb6c4a76ca6be04 selinux-policy-3.7.19-195.el6_4.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 3 Jun 2013 22:45:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0898 Moderate CentOS 5 mesa Update To: centos-announce(a)centos.org Message-ID: <20130603224512.GA32100(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0898 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0898.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 49122822eedbdd13ba7b1d680f51063154adde54959b2c3ccf2074ed5f2f0c57 glx-utils-6.5.1-7.11.el5_9.i386.rpm 89996ecbb3e50a020a6905f19e6218ebe3b41ddb46ae6199fb6da9fe6b54ed2f mesa-libGL-6.5.1-7.11.el5_9.i386.rpm 79020ce23423acbbe16d3a2bc55539de12c479544ceeae78f9f1387cae422418 mesa-libGL-devel-6.5.1-7.11.el5_9.i386.rpm e357c9406e9722f1a7f6a240128a31942cda596c6cc640b56f18122d5b70d8eb mesa-libGLU-6.5.1-7.11.el5_9.i386.rpm f4987ed4555a6490fc4d2a1a8409aa6d8d5e85b9caf083df5c9332099418cf2e mesa-libGLU-devel-6.5.1-7.11.el5_9.i386.rpm 2f77557f39e7e620d1fac84df078ce7a79e4580171317d1649b18fe6f4b23c40 mesa-libGLw-6.5.1-7.11.el5_9.i386.rpm 7096f36a4d960d574411d1d3e4c4e1642f4807bc7a634980045b1ce428f8606a mesa-libGLw-devel-6.5.1-7.11.el5_9.i386.rpm fdec08b6c0c4449d1af374f50ff41c10f69421a19f9db91272c0dcea4e546cfe mesa-libOSMesa-6.5.1-7.11.el5_9.i386.rpm 1ca226e6674f3b14bc1144dd67a0667c955e582c6e20f8069d339ae04bc4158c mesa-libOSMesa-devel-6.5.1-7.11.el5_9.i386.rpm 76f2304ed34c364648901a0382cfefc12ac5ebccaa838a12c4e417fb12d45a8f mesa-source-6.5.1-7.11.el5_9.i386.rpm x86_64: 9b12ff551e5a69f523613f3635ef91730d04b06f74a61c864ab20e63092d1eec glx-utils-6.5.1-7.11.el5_9.x86_64.rpm 89996ecbb3e50a020a6905f19e6218ebe3b41ddb46ae6199fb6da9fe6b54ed2f mesa-libGL-6.5.1-7.11.el5_9.i386.rpm 0aa84d570829032ef5101b335be2663ffd4764a2119b0b836ee8d88e6307bdbe mesa-libGL-6.5.1-7.11.el5_9.x86_64.rpm 79020ce23423acbbe16d3a2bc55539de12c479544ceeae78f9f1387cae422418 mesa-libGL-devel-6.5.1-7.11.el5_9.i386.rpm f9f9b8a79c0ff282dc45a357a9b71576f836fdea8cd55fd674d3e67cc0b6b51c mesa-libGL-devel-6.5.1-7.11.el5_9.x86_64.rpm e357c9406e9722f1a7f6a240128a31942cda596c6cc640b56f18122d5b70d8eb mesa-libGLU-6.5.1-7.11.el5_9.i386.rpm 22d3e0eb2c4ed006ef43b87332df7c05f066a9b21df08c2a0361609b4b07a686 mesa-libGLU-6.5.1-7.11.el5_9.x86_64.rpm f4987ed4555a6490fc4d2a1a8409aa6d8d5e85b9caf083df5c9332099418cf2e mesa-libGLU-devel-6.5.1-7.11.el5_9.i386.rpm aac5376318e0b52e7cb3aff6c12c68c01be0d3dc9415b16a35d0a1b41de75c5b mesa-libGLU-devel-6.5.1-7.11.el5_9.x86_64.rpm 2f77557f39e7e620d1fac84df078ce7a79e4580171317d1649b18fe6f4b23c40 mesa-libGLw-6.5.1-7.11.el5_9.i386.rpm c960c171b6feea2f593d0ae65ea34ebc134a3aee66339dd8d4ecf441492e7918 mesa-libGLw-6.5.1-7.11.el5_9.x86_64.rpm 7096f36a4d960d574411d1d3e4c4e1642f4807bc7a634980045b1ce428f8606a mesa-libGLw-devel-6.5.1-7.11.el5_9.i386.rpm 66a23e02a593099709a10760a644d4f6bd472abe2a9c35a8cb2b605a73cf5e62 mesa-libGLw-devel-6.5.1-7.11.el5_9.x86_64.rpm fdec08b6c0c4449d1af374f50ff41c10f69421a19f9db91272c0dcea4e546cfe mesa-libOSMesa-6.5.1-7.11.el5_9.i386.rpm f4c47c1d00f5bb382a191b3d6290f1cf041709988619349636916f3dca9edc13 mesa-libOSMesa-6.5.1-7.11.el5_9.x86_64.rpm 1ca226e6674f3b14bc1144dd67a0667c955e582c6e20f8069d339ae04bc4158c mesa-libOSMesa-devel-6.5.1-7.11.el5_9.i386.rpm 3da66f8f5ee59e2d68bfdd22c0e9921b1582b0606e1130ec29bd4678b1938a5b mesa-libOSMesa-devel-6.5.1-7.11.el5_9.x86_64.rpm be65dcebe4f326aad1791ac65a58d285f371ac6f47a17b3e240d0da25ccf1e5d mesa-source-6.5.1-7.11.el5_9.x86_64.rpm Source: 28fe60820ac9b7051fd865022adfd5a63d215c7b75ec5d0275594cbbc645cc6e mesa-6.5.1-7.11.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 3 Jun 2013 23:29:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0897 Important CentOS 6 mesa Update To: centos-announce(a)centos.org Message-ID: <20130603232901.GA6511(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0897 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0897.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 593fa4ebcae095c02f486fd0fdb9449fd4ac1e03bf26082f015177a34f146d72 glx-utils-9.0-0.8.el6_4.3.i686.rpm e8c4e7edec8a41eb3a8a5284dd90ec8a5b1eea677196747e1b352050b550d33c mesa-demos-9.0-0.8.el6_4.3.i686.rpm e634fc3b90b7222d121db2192697c59030e18fad3257b682a5a080ef97cdcddd mesa-dri-drivers-9.0-0.8.el6_4.3.i686.rpm c2fa021e0e2c92e772c26c79682e0be6da86a5d17016c2e1f27a33c5f5a71221 mesa-dri-filesystem-9.0-0.8.el6_4.3.i686.rpm 03f465504810bc7cfc58c843cc0218e1c6f254756f1715ecce717a370d65c3fa mesa-libGL-9.0-0.8.el6_4.3.i686.rpm 6890d6bcf2d317dbd2d540743f976f94a03732ede9ceb3519fe7a21bbe5ab952 mesa-libGL-devel-9.0-0.8.el6_4.3.i686.rpm 8e2e473fd5156f1cf1babd41703e1d5758dc26c8c038e3b247dbc4e5f8ff48c5 mesa-libGLU-9.0-0.8.el6_4.3.i686.rpm 5784dbeb45912450b85f9f3a36bf15171fb317ac34e00253d2f60c3bb85607ab mesa-libGLU-devel-9.0-0.8.el6_4.3.i686.rpm b53d35f0da1e5d36139bb464d7216a1c09a40180fa4b23dd368f5f48e029607f mesa-libOSMesa-9.0-0.8.el6_4.3.i686.rpm 009be5877f408918cf36938e469f790876d5e6363f23d8a02827d21938720893 mesa-libOSMesa-devel-9.0-0.8.el6_4.3.i686.rpm x86_64: cb6695915ebcfbfb8110971e42e037b249ef022f30e78d385b04836beb7632b9 glx-utils-9.0-0.8.el6_4.3.x86_64.rpm 4e8364f5ac1abae5fbc41dc33dd8b8c8d91bc5237d398654214ba8246cf6cc3c mesa-demos-9.0-0.8.el6_4.3.x86_64.rpm e634fc3b90b7222d121db2192697c59030e18fad3257b682a5a080ef97cdcddd mesa-dri-drivers-9.0-0.8.el6_4.3.i686.rpm 853c613b7ca795525d0e391c5549f9fd7474a9f5cf3f55e26e700b3e22ad0059 mesa-dri-drivers-9.0-0.8.el6_4.3.x86_64.rpm c2fa021e0e2c92e772c26c79682e0be6da86a5d17016c2e1f27a33c5f5a71221 mesa-dri-filesystem-9.0-0.8.el6_4.3.i686.rpm b913d7ab0ae55c764bb22627a2898279d952c82479b719c210a63be7cef5368b mesa-dri-filesystem-9.0-0.8.el6_4.3.x86_64.rpm 03f465504810bc7cfc58c843cc0218e1c6f254756f1715ecce717a370d65c3fa mesa-libGL-9.0-0.8.el6_4.3.i686.rpm d380d861c848c23719c96465051995611137cabd63501f54f48b865320bc545a mesa-libGL-9.0-0.8.el6_4.3.x86_64.rpm 6890d6bcf2d317dbd2d540743f976f94a03732ede9ceb3519fe7a21bbe5ab952 mesa-libGL-devel-9.0-0.8.el6_4.3.i686.rpm 2bf470a008ed79da61bc18f33f5c3d2a43d846efc401406b49b26898dba4037e mesa-libGL-devel-9.0-0.8.el6_4.3.x86_64.rpm 8e2e473fd5156f1cf1babd41703e1d5758dc26c8c038e3b247dbc4e5f8ff48c5 mesa-libGLU-9.0-0.8.el6_4.3.i686.rpm fbad4438403168f9fb54955f40cb36de8c24a8ea2f6af337e71fd45d49a08ee0 mesa-libGLU-9.0-0.8.el6_4.3.x86_64.rpm 5784dbeb45912450b85f9f3a36bf15171fb317ac34e00253d2f60c3bb85607ab mesa-libGLU-devel-9.0-0.8.el6_4.3.i686.rpm f3642776b44a6861257406bb9f8e66e433cca9e2f9a3b95e9588c4c6bc65db54 mesa-libGLU-devel-9.0-0.8.el6_4.3.x86_64.rpm b53d35f0da1e5d36139bb464d7216a1c09a40180fa4b23dd368f5f48e029607f mesa-libOSMesa-9.0-0.8.el6_4.3.i686.rpm 8db963ba7e3af3839ec0ee3062e3abd3601ddfa61830f5861b70946a19d62b65 mesa-libOSMesa-9.0-0.8.el6_4.3.x86_64.rpm 009be5877f408918cf36938e469f790876d5e6363f23d8a02827d21938720893 mesa-libOSMesa-devel-9.0-0.8.el6_4.3.i686.rpm efa0dd189c61762f925824cd6b001abd27c66944f55cb7754604bac06bfd332b mesa-libOSMesa-devel-9.0-0.8.el6_4.3.x86_64.rpm Source: 7ca6cd877d2916ddd5fce46e56c307534d8a573e67c2e96eb8d55224069b03b3 mesa-9.0-0.8.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 3 Jun 2013 23:30:45 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0896 Moderate CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20130603233045.GA6641(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0896 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2013-0896.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e97edfe3f7f53168e515ed246094d8815942d1f0398be50b0275650fc4d48d18 qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.5.i686.rpm x86_64: 585d0b8e14824c397079fac85b4524099fbd96e6d8269c1f96f8a78bcaa555d3 qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 68401f77608c13049a0a45710d8ed34818fecfa1aa5eb6a7f66df049631b6b5f qemu-guest-agent-win32-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 739a22239efcc7f63e5d6acecfcee1675c467db9a79b5302785ec60e05c2bd2f qemu-img-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm bfbee74d70e99cc51458a8f4818e3b2f7f023fde49a1db8b391f635227a7d9e4 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 0e590bb25400f61e02003d011d577050f8c3e77634ef815f11d2e51151b5b922 qemu-kvm-tools-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm Source: ea3a5183c1105b4d5baf4f3cb393addfaae25339a51631804dffa561c9da1523 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 100, Issue 1 ***********************************************

1 0

Need a Centos 6 USB hard drive recovery procedure
by Rock 03 Jun '13

03 Jun '13

My 15GB backup USB drive somehow got "corrupted" such that a "chkdsk /f E:" on WinXP removed the file allocation table (or whatever) making the NTFS drive appear empty. I tried Windows Recuva freeware to recover the files, and it has been working for 24 hours; but it has dumped about 65,000 files into a separate flat Windows directory. http://www3.picturepush.com/photo/a/12892041/img/12892041.jpg Since none of the files were deleted or written over, is there a method on Linux that will simply recover the missing file allocation directory structure instead of dumping a hundred thousand files into a single directory?

14 34

Where has system-config-sound gone?
by Ken Smith 03 Jun '13

03 Jun '13

Hi All, Just installed 6.4 on a system that might become a Myth Backend. Where's the normal sound icon gone that usually appears in Gnome? I can see the intel sound card driver is loaded. Which bits of alsa should be there? This is what I've got:- rpm -qa | grep alsa alsamixergui-0.9.0-0.9.rc2.el6.x86_64 alsa-utils-1.0.22-5.el6.x86_64 alsa-lib-1.0.22-3.el6.x86_64 Under System | Preferences Selecting the "Sound" icon gives a dialog box that says "Waiting for Sound System to respond" and the sound system never does respond. I bet I've got a zoo of stuff missing.... Any pointers most welcome Thanks Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 4

OT: Script Help
by James Pifer 03 Jun '13

03 Jun '13

Sorry for the off topic, but don't a better resource. I'm not great at scripting, but need a quick script to modify a file. I have a long file that has lines like this: some text some text2 CN=DATA.OU=XYZ.O=CO some text3 some text4 And this repeats, but XYZ changes. "DATA" is always called data. (it's being renamed basically) I need to change the middle line but leave the rest of the file as is like this: some text some text2 CN=XYZ_DATA.OU=XYZ.O=CO some text3 some text4 Anyone know a quick way to do this? Any help is appreciated. Thanks, James

10 21

How to start the graphic services configuration?
by Norman Schklar 03 Jun '13

03 Jun '13

I don't see a menu option from the KDE window or a name in the install software.. Norm

2 2

6.4 failing to connect
by Beartooth 01 Jun '13

01 Jun '13

Why do I keep getting this, and what do I do?? The error message is Greek to me. :-{ [root@Hbsk ~]# yum update Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile epel/metalink | 13 kB 00:00 * c6-media: * epel: mirror.vcu.edu * remi: rpms.famillecollet.com file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/ read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again [root@Hbsk ~]# -- Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User Remember I have precious (very precious!) little idea where up is.

3 3

Frustrated. Java on Centos 6 doesn't give an error message when downloading from a Samsung Galaxy S3
by Rock 01 Jun '13

01 Jun '13

SUMMARY: Maybe this all boils down to "how do we debug when Java fails on Centos 6? DETAILS: If you don't have the Samsung Galaxy S3, then you might not realize how frustratingly difficult it is to transfer multiple files from the smartphone to Centos 6. It should be as simple as hooking up a USB cable and dragging and dropping (which it is, on most other smartphones, including the Samsung Galaxy S2, which has USBMS mode still intact). Note: I don't have a microUSB card, so that isn't an option and I have no desire to transfer the personal photos to the cloud just to get them from the phone to Centos, nor to install Wine and/or a virtuoal OS just to do something as simple as transfer files. On the Samsung Galaxy S3, you can go all day to Settings->More Settings-> but there is nothing for "USB" anywhere anymore. Unfortunately, [url=http://androidforums.com/computers/499522-looking- linux-file-transfer-tool-android-4-0-devices.html]Google has apparently disabled USB transfer in the Android OS 4.0[/url] and above and replaced it with MTP file transfer. So Windows recognizes any ICS device plugged in, and Mac does too (via Android File Transfer); but Centos does not. Anyway, [url=https://www.centos.org/modules/newbb/viewtopic.php? topic_id=39977&forum=57&post_id=182904#forumpost182904]the workaround[/ url], is to use Kies Air to transfer the files over the air via WiFi from the phone to the Centos PC. This works - but that brings up the problem of [b]multiple[/b] files. The Kies Air gui for transferring multiple files at once is trivial (you just check "all files"); but it doesn't work. There is no error message. There are no warnings. There are no indications whatsoever; it just doesn't transfer anything. If you use the exact same procedure to transfer a single file, it works just fine. Googling for "Kies air won't download multiple files", I find a bazillion others have this problem - but most answers simply say to "install Java" on the host PC. For example: http://www.samsung.com/uk/support/usefulsoftware/KIESAIR/JSP Q: I cannot send multiple files at once A: Need to install Java – downloadable from the Java homepage (www.java.com ) in order to transfer multiple files at once or to upload a file over 100MB. So maybe this whole frustrating task of downloading multiple files from the smartphone to Centos hinges on debugging Java. Here's where I'm lost though. I know nothing about Java. What does "install Java" mean for Centos 6? Is that icedtea? [b]Q: How can I get an error message if icedtea isn't working when I try to transfer multiple files via Kies Air?[/b] [img]http://www5.picturepush.com/photo/a/13140568/640/13140568.png[/img]

14 52

how to find unknown ip address?
by hadi motamedi 01 Jun '13

01 Jun '13

Dear All On my network, there is a node with unknown ip address so I do not know about its range and it can be any of the range xx.xx.xx.xx . Is there any tool on my centos server to find this unknown ip address (irrespective of the range of my centos server self ip range) ? Thank you

8 11

NCFTP eliminar directories no vacios
by Rodrigo Pichiñual Norin 01 Jun '13

01 Jun '13

Hola a todos, no se si esto es posible, la verdad es que ncftp me parece muy util y eficaz, pero lo unico que le puedo criticar es que no puedo eliminar directorios que no estan vacios... estaba viendo la documentacion y al parecer esto es posible si configuro el servidor al que accedo desde mi maquina local(CLIENTE) habra alguna manera? Gracias

3 2

Newby using IntelR1304BB Need help with installing 6.4
by Norman Schklar 31 May '13

31 May '13

Seems I need to disable RAID, but don't find the option in the bios. 4ea 1 terabyte drives in raid 10 is the current setup. >From what I read, I need to disable the onboard raid and let Centos do the work. But I don't find any method to stop the raid. Norm Schklar

4 15

CentOS-announce Digest, Vol 99, Issue 16
by centos-announce-request＠centos.org 31 May '13

31 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0881 CentOS 6 nmap FASTTRACK Update (Johnny Hughes) 2. CESA-2013:0883 Important CentOS 5 gnutls Update (Johnny Hughes) 3. CESA-2013:0883 Important CentOS 6 gnutls Update (Johnny Hughes) 4. CESA-2013:0884 Moderate CentOS 6 libtirpc Update (Johnny Hughes) 5. CEBA-2013:0885 CentOS 5 glibc Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 30 May 2013 16:35:50 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0881 CentOS 6 nmap FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130530163550.GA26227(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0881 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0881.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 60a09c375423f65a3d62d65a7b2590991095aa89f655f21eee07f4c4665fe91d nmap-5.51-3.el6.i686.rpm 24eb30224cb24a84ef007ab57b438b89ccc006c6bf657a598d3ed19dabf08c11 nmap-frontend-5.51-3.el6.noarch.rpm x86_64: f20a881bbb245fc80cfec960641fc05c5b9b399284c3273bb0d28f6b91a399c9 nmap-5.51-3.el6.x86_64.rpm 24eb30224cb24a84ef007ab57b438b89ccc006c6bf657a598d3ed19dabf08c11 nmap-frontend-5.51-3.el6.noarch.rpm Source: 71f464607fe020b7e97b6da51f5b2b81e5c32d7de540edade1aede291a43b932 nmap-5.51-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 30 May 2013 18:50:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0883 Important CentOS 5 gnutls Update To: centos-announce(a)centos.org Message-ID: <20130530185013.GA27934(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0883 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0883.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6b99ce8aff86a024181f44140f23005849e836c8ed953d2e9d6239c6872831ce gnutls-1.4.1-10.el5_9.2.i386.rpm 249f779ad2a17162408fe6deeadfd16dd6880a4984d08930ee4cdd1ff78990fa gnutls-devel-1.4.1-10.el5_9.2.i386.rpm d4df710c1eef0bb3b3f4c53a120013b93970f114fd73653c73103f1cd4f21981 gnutls-utils-1.4.1-10.el5_9.2.i386.rpm x86_64: 6b99ce8aff86a024181f44140f23005849e836c8ed953d2e9d6239c6872831ce gnutls-1.4.1-10.el5_9.2.i386.rpm 09bd5715383415dccc9c14a34d64a4994c507817b773bb898f64bbcae07d01de gnutls-1.4.1-10.el5_9.2.x86_64.rpm 249f779ad2a17162408fe6deeadfd16dd6880a4984d08930ee4cdd1ff78990fa gnutls-devel-1.4.1-10.el5_9.2.i386.rpm da9c1d7f0b5711f9a819f4b54d3bb88bd89c1f88cea0a68b1bf1363eaa05c4fe gnutls-devel-1.4.1-10.el5_9.2.x86_64.rpm e3bbc306741e5fdf0d8cc02d1d76f7618f90ad31268d8ebe8003764278841f09 gnutls-utils-1.4.1-10.el5_9.2.x86_64.rpm Source: ec5e3a5d6d5f14b2b69072fb2b10033b6dd3bda9aef225c2d4efa394b611e226 gnutls-1.4.1-10.el5_9.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 30 May 2013 20:28:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0883 Important CentOS 6 gnutls Update To: centos-announce(a)centos.org Message-ID: <20130530202837.GA49291(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0883 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0883.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 67db64c6503776a303693ce1f8813df40bbc1724d172ebbcb931e3f93a367db9 gnutls-2.8.5-10.el6_4.2.i686.rpm 492754f93d1f99bf49b8206fbc231126a3b5930bf38f40e056cc800a3f13faa0 gnutls-devel-2.8.5-10.el6_4.2.i686.rpm 12cec5aaa963efb5020f36178d150c0ac5af888b8b2c445b9a7a0a8d145ec8f7 gnutls-guile-2.8.5-10.el6_4.2.i686.rpm 911ee17332980796ec91faac99dfac0fb6a916ed5f0b0df25a9bfa6d033eddbf gnutls-utils-2.8.5-10.el6_4.2.i686.rpm x86_64: 67db64c6503776a303693ce1f8813df40bbc1724d172ebbcb931e3f93a367db9 gnutls-2.8.5-10.el6_4.2.i686.rpm 20fdc7b719fefce8f0571c247c6ab8e51ab5e216475078d3d8bbfa6e20211da2 gnutls-2.8.5-10.el6_4.2.x86_64.rpm 492754f93d1f99bf49b8206fbc231126a3b5930bf38f40e056cc800a3f13faa0 gnutls-devel-2.8.5-10.el6_4.2.i686.rpm e05caa6d9a6185abe0daeeb9f834ed81f5e0c4811831fb231e1ac4b6d675fc98 gnutls-devel-2.8.5-10.el6_4.2.x86_64.rpm 12cec5aaa963efb5020f36178d150c0ac5af888b8b2c445b9a7a0a8d145ec8f7 gnutls-guile-2.8.5-10.el6_4.2.i686.rpm 785a1a17f1800e6643e4b5cd2e42cd5c2b34774fc53cad9a54ec6d43a138ec9d gnutls-guile-2.8.5-10.el6_4.2.x86_64.rpm 95ca6868dc4790561dfacc68135439bcfe82914dabe6ce5dc1ad42e61260320b gnutls-utils-2.8.5-10.el6_4.2.x86_64.rpm Source: d7fa200c501d1f16178ead48f883455ef443b46e97748603b34a762e7db6b99a gnutls-2.8.5-10.el6_4.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 30 May 2013 20:28:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0884 Moderate CentOS 6 libtirpc Update To: centos-announce(a)centos.org Message-ID: <20130530202852.GA49384(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0884 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0884.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a74006aa4b401f261e1f14e49e68c38e1a7c8e44e614e202c9986098cb171770 libtirpc-0.2.1-6.el6_4.i686.rpm fd91a212bf269f381ea8b975a9d19f21b6416b29b6727d9b325f21f321f32e8e libtirpc-devel-0.2.1-6.el6_4.i686.rpm x86_64: a74006aa4b401f261e1f14e49e68c38e1a7c8e44e614e202c9986098cb171770 libtirpc-0.2.1-6.el6_4.i686.rpm ccbd632d4920f8cd813cdcccc689763099b166805af5d65dbd725a5ac9d56028 libtirpc-0.2.1-6.el6_4.x86_64.rpm fd91a212bf269f381ea8b975a9d19f21b6416b29b6727d9b325f21f321f32e8e libtirpc-devel-0.2.1-6.el6_4.i686.rpm f4a61a0a332018e0f2154046d6cd1e6f42266bbb9d1c19a3837e28233f1ab5f5 libtirpc-devel-0.2.1-6.el6_4.x86_64.rpm Source: 18c3d5860ec0551ec40c92ef376bb45d7af641169ee620e1e10fdb99bf720083 libtirpc-0.2.1-6.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 30 May 2013 23:13:54 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0885 CentOS 5 glibc Update To: centos-announce(a)centos.org Message-ID: <20130530231354.GA8675(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0885 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0885.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1974b2314b9bdabeb365ea727d94d259441c51fced426aa316b2b26ca4e79925 glibc-2.5-107.el5_9.5.i386.rpm a517b6cd87b3cdba6cf987a64d8eabd75f4bffae5f40462fd84f7c901d1c7f6a glibc-2.5-107.el5_9.5.i686.rpm 5f05797e8d622080fe04d76543af83604e4c576d07529ced0cb59fcb3fc67c37 glibc-common-2.5-107.el5_9.5.i386.rpm 3ddddf1cfcfe3516e8bfe4255f92a7f9339813c872b1567dada7780b18f903d1 glibc-devel-2.5-107.el5_9.5.i386.rpm 1ef8e5d432fcd2033f0d0f9c6473b9eaed49fba3f94c8d9079e27c2cbed6bf23 glibc-headers-2.5-107.el5_9.5.i386.rpm f2b639e62cd75e38d055f8e03aa6ea7c38bf92714df52e0baa9c619d594b0b70 glibc-utils-2.5-107.el5_9.5.i386.rpm 43e67f56a2860848013289afc4bcdc1e9bfc6a843edb83c870c320e59e324fb9 nscd-2.5-107.el5_9.5.i386.rpm x86_64: a517b6cd87b3cdba6cf987a64d8eabd75f4bffae5f40462fd84f7c901d1c7f6a glibc-2.5-107.el5_9.5.i686.rpm 27e86f7f2ba834013da51d03a8ac916cc611db725a9fe3625b01f7087f249d8c glibc-2.5-107.el5_9.5.x86_64.rpm 8ea7c5b5a0b7c92aefe8e1d3b6328182b28ce45761ff8ea43531e6c6c8d8465e glibc-common-2.5-107.el5_9.5.x86_64.rpm 3ddddf1cfcfe3516e8bfe4255f92a7f9339813c872b1567dada7780b18f903d1 glibc-devel-2.5-107.el5_9.5.i386.rpm 140a9c8abe16dced595c56b3527cda126c78063c487c7d95d859621545ad6f02 glibc-devel-2.5-107.el5_9.5.x86_64.rpm 09a7100818b83ff64534a50c7f43f7377cf100d56d62778f271cc6a881c51444 glibc-headers-2.5-107.el5_9.5.x86_64.rpm ca2b6b39b6216b23bdc24c174101a82f7692026f96ee23631d6d20185b2d5d09 glibc-utils-2.5-107.el5_9.5.x86_64.rpm 49e178f825ab762d6a1781e9daacdb331b0d0b5ea6b434c4e6fecff200e7970a nscd-2.5-107.el5_9.5.x86_64.rpm Source: cbaaadd75c61c5546a62851a631c092d8927d67fe9baefcc34cdc12d62020cf4 glibc-2.5-107.el5_9.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 16 ***********************************************

1 0

CentOS-Fasttrack readme and repo file is missing?
by Stephen Harris 30 May '13

30 May '13

Just an FYI; hopefully someone who knows will be able to fix :-) http://wiki.centos.org/AdditionalResources/Repositories says CentOS-Fasttrack - This repository contains bugfix and enhancement updates, issued from time to time, between update sets that may be rolled into the next update set. See this Readme file for more details. This repository has a config file located here for CentOS-5. CentOS-6 Fasttrack is now available and can be accessed with the repo configuration here. But the "Readme" file and the two "here" links to the repo file are broken. I don't know if it's just the location has changed, or if the files are missing :-) -- rgds Stephen

2 1

CentOS Wiki - repo links broken
by Max Pyziur 30 May '13

30 May '13

Greetings, I tried to install FASTTRACK repos today from this link: http://wiki.centos.org/AdditionalResources/Repositories and the links were broken e.g. http://mirror.centos.org/centos/6/fasttrack/CentOS-fasttrack.repo fyi, Max Pyziur pyz(a)brama.com

3 4

crashes during raid-check
by Barry Olddog 30 May '13

30 May '13

For two of the last three sundays, my desktop crashed overnight, apparently during the cron raid-check started. Has anyone seen anything like this? q The last message in messages tells me the syncing operation started. Within minutes, the machine just quits. Other weeks, the sync completes normally, with no problem reported in a couple years of operation. . I've disabled the cron.weekly job until I get a chance to run it manually.. This is a software raid 1 with two 1.5 tb drives. My prime suspect in all mysteries is the nvidia driver but I have no clue. I use kmod-nvidia from elrepo. Thanks, Barry

1 0

Trying to get a kernel dump
by Lists 30 May '13

30 May '13

Trying to debug a database server getting cpu softlocks causing SSHD to hang and not let anybody log in. Figured that a good first step would be to get some kernel dumps when the problem occurs. According to what I read at the following web site, I can get dumps for softlock problems too. Here's the site: http://blog.kreyolys.com/2011/03/17/no-panic-its-just-a-kernel-panic/ Using a throwaway 32 bit dev server, I followed the directions exactly with the below modifications. A) I got the kernel-debuginfo and kernel-debuginfo-common by enabling /etc/yum.repos.d/CentOS-Debuginfo.repo and then installing with yum. B) One other change is that I had to use an alternate partition instead of the one resolving "/var" because the server was set up with LVM. The partition that I used ("/dev/sdb3") is actually mounted at /alt/home. So when I simulate a crash by piping a "c" to /proc/sysrq-trigger, I see the following in /var/log/messages: May 30 13:37:24 norman kernel: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) But nothing else. NO files in /var/crash, or /alt/home/var/crash (directory exists) Nothing happens at all when I run # echo 1 > /proc/sys/kernel/softlockup_panic I've tried tweaking a few settings in /etc/kdump.conf, restarting after each time (since it creates a new boot img) to no avail. What am I messing? Here's a bunch of hopefully relevant info: kernel line in grub.conf: kernel /vmlinuz-2.6.32-358.6.2.el6.i686 ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto quiet rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM crashkernel=128M nmi_watchdog=1 # grep -v "#" /etc/kdump.conf ext4 /dev/sdb3 path /var/crash core_collector makedumpfile -c -d 31 # cat /proc/meminfo MemTotal: 379352 kB MemFree: 232748 kB Buffers: 22496 kB Cached: 79040 kB SwapCached: 0 kB Active: 60512 kB Inactive: 60152 kB Active(anon): 20028 kB Inactive(anon): 4640 kB Active(file): 40484 kB Inactive(file): 55512 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 379352 kB LowFree: 232748 kB SwapTotal: 1048568 kB SwapFree: 1048568 kB Dirty: 48 kB Writeback: 0 kB AnonPages: 19124 kB Mapped: 14320 kB Shmem: 5556 kB Slab: 16216 kB SReclaimable: 8444 kB SUnreclaim: 7772 kB KernelStack: 816 kB PageTables: 2188 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1238244 kB Committed_AS: 164964 kB VmallocTotal: 506396 kB VmallocUsed: 5344 kB VmallocChunk: 491856 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 9692 kB DirectMap2M: 514048 kB // IN sysctl.conf kernel.unknown_nmi_panic=1 kernel.panic_on_unrecovered_nmi=1 vm.panic_on_oom=1 kernel.sysrq = 1 # /cat/proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Pentium(R) 4 CPU 1.50GHz stepping : 2 cpu MHz : 1495.192 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts bogomips : 2990.38 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: # dmesg: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.6.2.el6.i686 (mockbuild(a)c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 18:12:13 UTC 2013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff77000 (usable) BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. SMBIOS version 2.3 @ 0xF0430 DMI: Dell Computer Corporation OptiPlex GX240 /OptiPlex GX240 , BIOS A05 07/19/2002 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x1ff77 max_arch_pfn = 0x400000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-000000001ff77000 Using x86 segment limits to approximate NX protection 0000000000 - 0000200000 page 4k 0000200000 - 001fe00000 page 2M 001fe00000 - 001ff77000 page 4k kernel direct mapping tables up to 1ff77000 @ 7000-f000 RAMDISK: 1f211000 - 1ff66d6a ACPI: RSDP 000fd560 00014 (v00 DELL ) ACPI: RSDT 000fd574 00034 (v01 DELL GX240 00000008 ASL 00000061) ACPI: FACP 000fd5a8 00074 (v01 DELL GX240 00000008 ASL 00000061) ACPI: DSDT fffe3c22 02393 (v01 DELL dt_ex 00001000 MSFT 0100000D) ACPI: FACS 1ff77000 00040 ACPI: SSDT fffe60f2 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) ACPI: APIC 000fd61c 0005C (v01 DELL GX240 00000008 ASL 00000061) ACPI: BOOT 000fd678 00028 (v01 DELL GX240 00000008 ASL 00000061) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 511MB LOWMEM available. mapped low ram: 0 - 1ff77000 low ram: 0 - 1ff77000 node 0 low ram: 00000000 - 1ff77000 node 0 bootmap 00002000 - 00005ff0 (9 early reservations) ==> bootmem [0000000000 - 001ff77000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000c6f610] TEXT DATA BSS ==> [0000400000 - 0000c6f610] #4 [001f211000 - 001ff66d6a] RAMDISK ==> [001f211000 - 001ff66d6a] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000c70000 - 0000c78174] BRK ==> [0000c70000 - 0000c78174] #7 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] found SMP MP-table at [c00fe710] fe710 Reserving 128MB of memory at 16MB for crashkernel (System RAM: 511MB) Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x0001ff77 HighMem 0x0001ff77 -> 0x0001ff77 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x000000a0 0: 0x00000100 -> 0x0001ff77 On node 0 totalpages: 130838 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125848 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c9600000 s36088 r0 d21256 u1048576 pcpu-alloc: s36088 r0 d21256 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129815 Kernel command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto quiet rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM crashkernel=128M nmi_watchdog=1 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 364908k/523740k available (4419k kernel code, 158168k reserved, 2500k data, 512k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xe0777000 - 0xff5fe000 ( 494 MB) lowmem : 0xc0000000 - 0xdff77000 ( 511 MB) .init : 0xc0ac3000 - 0xc0b43000 ( 512 kB) .data : 0xc0850ea8 - 0xc0ac2008 (2500 kB) .text : 0xc0400000 - 0xc0850ea8 (4419 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:424 Console: colour VGA+ 80x25 console [tty0] enabled allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1495.192 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.38 BogoMIPS (lpj=1495192) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU0: Hyper-Threading is disabled mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20090903 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 1.50GHz stepping 02 Performance Events: Netburst events, Netburst P4/Xeon PMU driver. ... version: 0 ... bit width: 40 ... generic registers: 18 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 0 ... event mask: 000000000003ffff NMI watchdog enabled, takes one hw-pmu counter. Brought up 1 CPUs Total of 1 processors activated (2990.38 BogoMIPS). sizeof(vma)=100 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=1348 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 1ff77000 (8192 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbe2e, last bus=2 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: reg 20: [io 0xff80-0xff9f] pci 0000:00:1f.3: reg 20: [io 0xdcd0-0xdcdf] pci 0000:00:1f.4: reg 20: [io 0xff60-0xff7f] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff] pci 0000:00:1f.5: reg 14: [io 0xdc40-0xdc7f] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] pci 0000:01:00.0: reg 18: [mem 0xfb000000-0xfbffffff] pci 0000:01:00.0: reg 30: [mem 0x80000000-0x8001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:0c.0: reg 10: [io 0xec80-0xecff] pci 0000:02:0c.0: reg 14: [mem 0xfe1ffc00-0xfe1ffc7f] pci 0000:02:0c.0: reg 30: [mem 0xfe200000-0xfe21ffff pref] pci 0000:02:0c.0: supports D1 D2 pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0c.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe2fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource jiffies pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x00100000-0x00ffffff] pnp 00:00: [mem 0x01000000-0x1ff76fff] pnp 00:00: [mem 0x000f0000-0x000fffff] pnp 00:00: [mem 0xfec00000-0xfec0ffff] pnp 00:00: [mem 0xfee00000-0xfee0ffff] pnp 00:00: [mem 0xffb00000-0xffbfffff] pnp 00:00: [mem 0xffc00000-0xffffffff] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x0080-0x009f] pnp 00:02: [io 0x0000-0x001f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x007f] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x02f8-0x02ff] pnp 00:08: [irq 3] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x0378-0x037f] pnp 00:09: [io 0x0778-0x077f] pnp 00:09: [irq 7] pnp 00:09: [dma 0 disabled] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [io 0x0062-0x0063] pnp 00:0a: [io 0x0065-0x006f] pnp 00:0a: [io 0x00e0-0x00ef] pnp 00:0a: [io 0x0800-0x085f] pnp 00:0a: [io 0x0c00-0x0c7f] pnp 00:0a: [io 0x0860-0x08ff] pnp 00:0a: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:0a: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved system 00:00: [mem 0x01000000-0x1ff76fff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved system 00:00: [mem 0xffc00000-0xffffffff] has been reserved system 00:0a: [io 0x0c00-0x0c7f] has been reserved Switching to clocksource acpi_pm pci 0000:01:00.0: no compatible bridge window for [mem 0x80000000-0x8001ffff pref] pci 0000:02:0c.0: address space collision: [mem 0xfe200000-0xfe21ffff pref] conflicts with PCI Bus 0000:02 [mem 0xfe100000-0xfe2fffff] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x200fffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:0c.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe2fffff] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x200fffff pref] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfdffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe2fffff] pci_bus 0000:02: resource 2 [mem 0x20000000-0x200fffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1f.2: PCI INT D disabled alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1f.4: PCI INT C disabled pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 13655k freed Simple Boot Flag at 0x7a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1369944362.104:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 739 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 834D293187AE1760 - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ERST: Table is not found! GHES: HEST is not enabled! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i845 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1f.2: setting latency timer to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1f.4: setting latency timer to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ff60 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1f.4 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2013-05-30 20:06:03 UTC (1369944363) Initalizing network drop monitor service Freeing unused kernel memory: 512k freed Write protecting the kernel text: 4420k Write protecting the kernel read-only data: 1924k dracut: dracut-004-303.el6 Refined TSC clocksource calibration: 1495.148 MHz. Switching to clocksource tsc device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel(a)redhat.com udev: starting version 147 ACPI: WMI: Mapper loaded [drm] Initialized drm 1.1.0 20060810 dracut: Starting plymouth daemon ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata1.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100 ata1.00: 976773168 sectors, multi 8: LBA48 ata2.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 ata2.00: 976773168 sectors, multi 8: LBA48 ata2.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/VolGroup/lv_home' [414.27 GiB] inherit dracut: inactive '/dev/VolGroup/lv_swap' [1.00 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1369944367.063:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50922 usecs (4 samples) intel8x0: measured clock 78 rejected intel8x0_measure_ac97_clock: measured 50946 usecs (2852 samples) intel8x0: clocking to 41157 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 3c59x 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3c59x: Donald Becker and others. 0000:02:0c.0: 3Com PCI 3c905C Tornado at e0ec0c00. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb2): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb3): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: Adding 1048568k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:1048568k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (5927 buckets, 23708 max) ip_tables: (C) 2000-2006 Netfilter Core Team eth0: setting full-duplex. eth0: no IPv6 routers present SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)

1 0

Proper method to report no input on unlock screen?
by Dave Johansen 30 May '13

30 May '13

I'm using 32-bit CentOS 6.4 and having an issue with not being able to type any input on the unlock screen when resuming from sleep while docked on a Thinkpad T60. It's basically appears to be the same issue as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=594696 What's the proper way to handle this? Do I open a bug in the CentOS repo? Or do I open a bugzilla with RedHat? Thanks, Dave

1 0

How to load balance interrupts of a NIC on the PCI-MSI-edge driver in CentOS? :(
by Alex Flex 30 May '13

30 May '13

Hello CentOS ! Iam trying to configure a Dual Core 1.6Ghz AMD E-350 machine to be able NIC (eth0) interrupts the most efficient way possible so that I can be able to handle the large number of random source packets per second. Currently running CentOS 6.4 2.6.32-358.6.2.el6.x86_64, i made some load testing with a random sourced syn flood to the NIC of this machine and found out according to top all the CPU interrupts are being sent to CPU0, thus saturating it and keeping the second core 100% idle because of this the amount of PPS handled is low (50k /sec). So.. below the output of /proc/interrupts, and also the output of the SMP affinity file which already contains "3" which I expect it tells the kernel to load balance the interrupts between the two cores and its not happening. Questions: a.) Could anyody please help me with a solution so that iam able to balance equally the interrupts on both cores? b.) Is there anyway to actually assign more interrupts to this IRQ (25) or is that something that the kernel discretly takes care of? Thanks Alex [root@node2 ~]# cat /proc/irq/25/smp_affinity 3 Btw I also tried setting this value to "2" and "1" to get to choose which core it handles, and that did work but again the problem is I can only use one core at a time and not balance! [root@node2 ~]# cat /proc/interrupts CPU0 CPU1 0: 229 9838 IO-APIC-edge timer 1: 0 2 IO-APIC-edge i8042 8: 0 1 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 0 4 IO-APIC-edge i8042 14: 0 0 IO-APIC-edge pata_atiixp 15: 0 0 IO-APIC-edge pata_atiixp 16: 4 650 IO-APIC-fasteoi snd_hda_intel 17: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2, ehc i_hcd:usb3 18: 0 4 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb5, ohc i_hcd:usb6, ohci_hcd:usb7 19: 7 2754 IO-APIC-fasteoi ahci 24: 0 31 PCI-MSI-edge snd_hda_intel 25: 1 876343 PCI-MSI-edge eth0

4 9

Mplayer + jack
by Gary Hodder 30 May '13

30 May '13

Hi all, anyone know of a repo for 6.4 that contains mplayer+gui with jack compiled into it? Thanks Gary.

2 2

CentOS-announce Digest, Vol 99, Issue 15
by centos-announce-request＠centos.org 30 May '13

30 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0777 CentOS 6 perl-Socket6 FASTTRACK Update (Johnny Hughes) 2. CEBA-2013:0785 CentOS 6 perl-Net-DNS FASTTRACK Update (Johnny Hughes) 3. CEBA-2013:0838 CentOS 6 perl-XML-Dumper FASTTRACK Update (Johnny Hughes) 4. CEBA-2013:0837 CentOS 6 libksba FASTTRACK Update (Johnny Hughes) 5. CEBA-2013:0836 CentOS 6 perl-Test-MockObject FASTTRACK Update (Johnny Hughes) 6. CEBA-2013:0845 CentOS 6 ftp FASTTRACK Update (Johnny Hughes) 7. CEBA-2013:0843 CentOS 6 arptables_jf FASTTRACK Update (Johnny Hughes) 8. CEBA-2013:0844 CentOS 6 environment-modules FASTTRACK Update (Johnny Hughes) 9. CEBA-2013:0851 CentOS 6 perl-CGI-Session FASTTRACK Update (Johnny Hughes) 10. CEBA-2013:0859 CentOS 6 perl-Test-Memory-Cycle FASTTRACK Update (Johnny Hughes) 11. CEBA-2013:0860 CentOS 6 mod_auth_kerb FASTTRACK Update (Johnny Hughes) 12. CEBA-2013:0879 CentOS 6 createrepo FASTTRACK Update (Johnny Hughes) 13. CEEA-2013:0880 CentOS 5 tzdata Update (Johnny Hughes) 14. CEEA-2013:0880 CentOS 6 tzdata Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 29 May 2013 21:10:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0777 CentOS 6 perl-Socket6 FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211033.GA1492(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0777 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0777.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8af4f4ae9581407bc8bc334fbf71fb99bad6bb4e7c05c16fb040723bdccc6552 perl-Socket6-0.23-4.el6.i686.rpm x86_64: 6fadf3544900f72d380b2c2dcb610b29f17ee16d3770f9ea6a573ddd1e047501 perl-Socket6-0.23-4.el6.x86_64.rpm Source: 94be556206973a541689e7e1928a43e88a3e906343d3b152a690270bfb1d55ff perl-Socket6-0.23-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 29 May 2013 21:11:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0785 CentOS 6 perl-Net-DNS FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211118.GA1585(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0785 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0785.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6eb60d6aa86499321606239acb229b4b6c69567b3ccd3509fbf49d1949472247 perl-Net-DNS-0.65-5.el6.i686.rpm 2e4d335227cd2f51e4d570b297b7724f85a2a0be0d2e9361d28d031ffec784dd perl-Net-DNS-Nameserver-0.65-5.el6.i686.rpm x86_64: 1acdda18b7a933ea4b98678d68f4b42dded4684bcfe6196bf939ebe1ec2d8d6b perl-Net-DNS-0.65-5.el6.x86_64.rpm b386ff11e172740eeeadce690d9ab7977347dce01d4295729b4886540dbf628c perl-Net-DNS-Nameserver-0.65-5.el6.x86_64.rpm Source: abc82b8ae937afa595ed6fbc60d0bf04f528dc8187717477d7a1f7a572704551 perl-Net-DNS-0.65-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 29 May 2013 21:11:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0838 CentOS 6 perl-XML-Dumper FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211133.GA1664(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0838 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0838.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8019a34dc00a2c522b60c8bcfaea4432f3b49b3ea47d308bf789c191d5783b9d perl-XML-Dumper-0.81-8.el6.noarch.rpm x86_64: 8019a34dc00a2c522b60c8bcfaea4432f3b49b3ea47d308bf789c191d5783b9d perl-XML-Dumper-0.81-8.el6.noarch.rpm Source: 4202e12345532e85b11b5bf041fd447305a08a038864aa72aed78aa87a33099d perl-XML-Dumper-0.81-8.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 29 May 2013 21:12:25 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0837 CentOS 6 libksba FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211225.GA1883(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0837 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0837.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 154a9bbd8f61d33c155965369ccd24eee5a08d59b5bf9cc2c45c37e18b637f76 libksba-1.0.7-4.el6.i686.rpm 2df38ae2260c046ae1afcb1d4eb5b2648999db815f41972695a9cd24647869ba libksba-devel-1.0.7-4.el6.i686.rpm x86_64: 154a9bbd8f61d33c155965369ccd24eee5a08d59b5bf9cc2c45c37e18b637f76 libksba-1.0.7-4.el6.i686.rpm 7bd16068eec3cc8f1e9d00d93ce6684f70c4d87441c5c66bbb107efe29179a13 libksba-1.0.7-4.el6.x86_64.rpm 2df38ae2260c046ae1afcb1d4eb5b2648999db815f41972695a9cd24647869ba libksba-devel-1.0.7-4.el6.i686.rpm d9fb7731231aa420f9403af6bc619d975005130cf96bdb802ffb62dd899421e2 libksba-devel-1.0.7-4.el6.x86_64.rpm Source: 23525feeb901a73959cf47b91f5fb0eb8c8a338cf996790ca6280854d10c2eba libksba-1.0.7-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 29 May 2013 21:13:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0836 CentOS 6 perl-Test-MockObject FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211319.GA1997(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0836 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d4bf3d056da18202bc6f7710d274c1ff2079f9867eb774c40fcfd36ccb9b3be4 perl-Test-MockObject-1.09-4.el6.noarch.rpm x86_64: d4bf3d056da18202bc6f7710d274c1ff2079f9867eb774c40fcfd36ccb9b3be4 perl-Test-MockObject-1.09-4.el6.noarch.rpm Source: 6443c307f887fe2246383ee277b78e3557ef3b6f952e8b0caa912799fb37ed8f perl-Test-MockObject-1.09-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 29 May 2013 21:13:30 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0845 CentOS 6 ftp FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211330.GA2079(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0845 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0845.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 88b81f06f804f1c6313d11dc670696ca62836719344ca2b8700913f53f2dce42 ftp-0.17-54.el6.i686.rpm x86_64: e4236f1d331ef0e7bfd2bf4da2a504f664f8df05d1794bb7d4165982959ecb07 ftp-0.17-54.el6.x86_64.rpm Source: 7a2edf2fcc9ef08d143ba9fbc929429a4cf84bcc447f7bf0b2aa3d92cc2e68c3 ftp-0.17-54.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Wed, 29 May 2013 21:13:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0843 CentOS 6 arptables_jf FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211341.GA2161(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0843 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0843.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b06920c018e054572c416b29f35e3019c14dc1047393ad790b8a208bfd9dd0d5 arptables_jf-0.0.8-23.el6.i686.rpm x86_64: a95d6d47ed117615813d96eb4327fbf1c8dfb1934a9fae62c22045c1341c9abd arptables_jf-0.0.8-23.el6.x86_64.rpm Source: b33d5e5f31345429d5f0e6dc5e49aaea344c0e3eb4b2932dd6764e824b93fed9 arptables_jf-0.0.8-23.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 29 May 2013 21:13:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0844 CentOS 6 environment-modules FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211355.GA2238(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0844 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0844.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6b8635a86c520de743252c941df6d9737b5fcecd2fd46700495981ecb763924e environment-modules-3.2.9c-6.el6.i686.rpm x86_64: 8894929bf52723ca625ba9fe7591a17d6a74fb82a05f01eaa07c11d405c27d17 environment-modules-3.2.9c-6.el6.x86_64.rpm Source: 13d825e96b53255b7e7e1ebece313269bd771d7a382fb0a493e68d64deff50f9 environment-modules-3.2.9c-6.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Wed, 29 May 2013 21:14:09 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0851 CentOS 6 perl-CGI-Session FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211409.GA2323(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0851 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0851.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7ecca8f4b78181c90e5d83fbfe5e684734eaa0fc60f289a75ae7b94117deb958 perl-CGI-Session-4.35-6.el6.noarch.rpm x86_64: 7ecca8f4b78181c90e5d83fbfe5e684734eaa0fc60f289a75ae7b94117deb958 perl-CGI-Session-4.35-6.el6.noarch.rpm Source: 12ca3292fae11921adf787f2fb956d6f4d7fc2248719d08148ebd4c15ca7cac7 perl-CGI-Session-4.35-6.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Wed, 29 May 2013 21:14:25 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0859 CentOS 6 perl-Test-Memory-Cycle FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211425.GA2412(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0859 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0859.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2efbcbc20d439a524d45bd69263fc20fac38e501669fa1a355f75e6c3ab955bf perl-Test-Memory-Cycle-1.04-8.el6.noarch.rpm x86_64: 2efbcbc20d439a524d45bd69263fc20fac38e501669fa1a355f75e6c3ab955bf perl-Test-Memory-Cycle-1.04-8.el6.noarch.rpm Source: ef22add13b44f6784dfdd8ad933cee4e47b94b7718f33e81e0f94755818c1ca2 perl-Test-Memory-Cycle-1.04-8.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Wed, 29 May 2013 21:14:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0860 CentOS 6 mod_auth_kerb FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130529211443.GA2495(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0860 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0860.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a66348b86c4700b3e43d01394b21e502c2ec857b47973f2b8bf4140262345186 mod_auth_kerb-5.4-10.el6.i686.rpm x86_64: 3a4a39587d2ba8f7b29b004f801d95de0a282977dbf5be7c4e3620be90c1a0c7 mod_auth_kerb-5.4-10.el6.x86_64.rpm Source: a60e3185d0a3240afbcad1ab3df191a7be072b0ebdd1431cbfb23b80aeca0069 mod_auth_kerb-5.4-10.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 12 Date: Thu, 30 May 2013 10:31:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0879 CentOS 6 createrepo FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130530103153.GA11771(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0879 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0879.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ff6a7bb9ea904a17436b462e950a657e9b2f6809b696690b197064abde138d1e createrepo-0.9.9-18.el6.noarch.rpm x86_64: ff6a7bb9ea904a17436b462e950a657e9b2f6809b696690b197064abde138d1e createrepo-0.9.9-18.el6.noarch.rpm Source: 9602940380bda0d30d87d18f17a3efb4adb3e3f9872ac6beda4d0602b60c5954 createrepo-0.9.9-18.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 13 Date: Thu, 30 May 2013 10:33:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:0880 CentOS 5 tzdata Update To: centos-announce(a)centos.org Message-ID: <20130530103359.GA4904(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:0880 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-0880.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 32e9c3028ac37c3075c058f7a78c63d3c5523dc5948f8879f2a76b5bc6badda7 tzdata-2013c-1.el5.i386.rpm 12dc73965d3e19662f51187baa386816773e4e11481d695ce56526451dc642a3 tzdata-java-2013c-1.el5.i386.rpm x86_64: 03b4658e82e3dfbcc6fe03ef2b8d2946da407ec945557b6476d17fd1111b56e5 tzdata-2013c-1.el5.x86_64.rpm 84cce806e473e328d1566fcbbd9c929e531b79b3267b116ddf8651b4f4bbd94d tzdata-java-2013c-1.el5.x86_64.rpm Source: 88808974b71bdcea0a3f4480d9292fb711d561f9dc312dd60ad31acdd49f8487 tzdata-2013c-1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 14 Date: Thu, 30 May 2013 11:38:54 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:0880 CentOS 6 tzdata Update To: centos-announce(a)centos.org Message-ID: <20130530113854.GA22279(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:0880 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-0880.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 57abb858d703e92c3743135d2b891a802b5c39855ed724c509b32c2c802dd415 tzdata-2013c-1.el6.noarch.rpm cd1e8476a2fc45133f14a0d915fdb4631da4c2305f0973cd551ea101dd5c7cb3 tzdata-java-2013c-1.el6.noarch.rpm x86_64: 57abb858d703e92c3743135d2b891a802b5c39855ed724c509b32c2c802dd415 tzdata-2013c-1.el6.noarch.rpm cd1e8476a2fc45133f14a0d915fdb4631da4c2305f0973cd551ea101dd5c7cb3 tzdata-java-2013c-1.el6.noarch.rpm Source: dfdbde3da46438e00cad992da621bdc531df0974f0898c5a8d8b7076e9370aaf tzdata-2013c-1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 15 ***********************************************

1 0

Strange Beauvoir with hard and soft link
by Dario Lesca 30 May '13

30 May '13

How to is possible this? > [root@lucatest ~]# ls -lid /var/log /var/log/ispconfig /var/log/ispconfig/httpd /var/log/ispconfig/httpd/prova.it /var/log/ispconfig/httpd/prova.it/test /var/www /var/www/clients /var/www/clients/client1 /var/www/clients/client1/web3 /var/www/clients/client1/web3/log /var/www/clients/client1/web3/log/test > 706 drwxr-xr-x. 15 root root 4096 29 mag 08:44 /var/log > 69619 drwxr-xr-x 3 root root 4096 8 mag 18:05 /var/log/ispconfig > 69620 drwxr-xr-x 6 root root 4096 29 mag 10:54 /var/log/ispconfig/httpd > 253961 drwxr-xr-x 2 root root 4096 29 mag 12:21 /var/log/ispconfig/httpd/prova.it > 253984 -rw-r--r-- 1 root root 0 29 mag 12:21 /var/log/ispconfig/httpd/prova.it/test > 44509 drwxr-xr-x. 12 root root 4096 29 mag 10:54 /var/www > 79376 drwxr-xr-x 4 root root 4096 22 mag 12:57 /var/www/clients > 87935 drwxr-xr-x 7 root root 4096 29 mag 10:54 /var/www/clients/client1 > 253953 drwxr-xr-x 9 root root 4096 29 mag 10:54 /var/www/clients/client1/web3 > 253961 drwxr-xr-x 2 root root 4096 29 mag 12:21 /var/www/clients/client1/web3/log > 253984 -rw-r--r-- 1 root root 0 29 mag 12:21 /var/www/clients/client1/web3/log/test See this two folder: 1) /var/log/ispconfig/httpd/prova.it 2) /var/www/clients/client1/web3/log have the same inode (253953) and none of the parent dirs are symbolic link (l) but (d), and dir is not possible to generate it with hard link. If I put a file into first dir, the file there is also into second dir. See also this two file: 1) /var/log/ispconfig/httpd/prova.it/test 2) /var/www/clients/client1/web3/log/test these file have same inode 253984 but its not hard or soft link, if I modify first file also the second file is modified There is only one filesystem and is the root filesystem. How to is possible this situation? Many thanks -- Dario Lesca - sip:dario@solinos.it (Inviato dal mio Linux Fedora18+Gnome3)

2 2

CentOS-announce Digest, Vol 99, Issue 14
by centos-announce-request＠centos.org 29 May '13

29 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:0870 Important CentOS 5 tomcat5 Update (Johnny Hughes) 2. CESA-2013:0868 Moderate CentOS 6 haproxy Update (Johnny Hughes) 3. CESA-2013:0869 Important CentOS 6 tomcat6 Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 May 2013 18:47:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0870 Important CentOS 5 tomcat5 Update To: centos-announce(a)centos.org Message-ID: <20130528184752.GA21826(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0870 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0870.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c8bc1dd16e175e2ac1d4bfab221ae4a7d09b9db8ee229724103d1c5a697ff7a0 tomcat5-5.5.23-0jpp.40.el5_9.i386.rpm 764e1c2a1327d2e002ff387ca7d81d85c3f1d8daa8867caee8083b45fbfaf66b tomcat5-admin-webapps-5.5.23-0jpp.40.el5_9.i386.rpm 7e141d134b02eceaf6f8851e364fb3cc86674205e2fc0dc41f80bc4e078316de tomcat5-common-lib-5.5.23-0jpp.40.el5_9.i386.rpm 8fc81f7d4beb178cec01bc091a0eb12499b74eb9bec92727752e69b0b4452c03 tomcat5-jasper-5.5.23-0jpp.40.el5_9.i386.rpm caa002ae0f3955d131cf98a3f19f7ce53b8cedbd2597075492c17429d7200d30 tomcat5-jasper-javadoc-5.5.23-0jpp.40.el5_9.i386.rpm ef03335695eed27c09a060105eb117b9449a726ec3e41547a64953525349f5d0 tomcat5-jsp-2.0-api-5.5.23-0jpp.40.el5_9.i386.rpm ff4811a6c80b566b2e3e574952b9d38f4f6aa5ccb63f092441663ba4df362eb3 tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.40.el5_9.i386.rpm cac3df17ad4dd740942657f0fff8408e739012550fb8d8c021374c020792dc59 tomcat5-server-lib-5.5.23-0jpp.40.el5_9.i386.rpm 0851de8984b252f89a3dccfabd7389b17f702d3a754f917b624782664be59e10 tomcat5-servlet-2.4-api-5.5.23-0jpp.40.el5_9.i386.rpm 29c79ab522e210421e6c34b7fa6741c7c2970ee0fb56ff2917a3251dbfaa0069 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.40.el5_9.i386.rpm 076b66365bd10a2ae3989a76d86ca4b3d107a7aa6dd8933a24fec3324fed1467 tomcat5-webapps-5.5.23-0jpp.40.el5_9.i386.rpm x86_64: 111ec74f446aef5e58b9e7eb3b78d8981c1e10e28f415a0f4e100473333d1e3f tomcat5-5.5.23-0jpp.40.el5_9.x86_64.rpm dc69f8f6e201494b35b3ccc57a5fa138e7a87b5b5d9ab9bc227c695fc1ed98b2 tomcat5-admin-webapps-5.5.23-0jpp.40.el5_9.x86_64.rpm 9567eb0501a428b8c5a3724b361c5597c22351192edbb5110f211075742bd198 tomcat5-common-lib-5.5.23-0jpp.40.el5_9.x86_64.rpm b76f1f162224a29decafbd72e6f8c359fbeaf073fb489f89e1e719ca531256bf tomcat5-jasper-5.5.23-0jpp.40.el5_9.x86_64.rpm ee17909f73ed284cda08699740c3959564c8dce31f0d610bad30363f92b5ef7b tomcat5-jasper-javadoc-5.5.23-0jpp.40.el5_9.x86_64.rpm 2fe19d75b61dcfd9ca9fb0eb5bd96c7eb0d6f1f2d902601197e16227f12335a8 tomcat5-jsp-2.0-api-5.5.23-0jpp.40.el5_9.x86_64.rpm c82007af124a9e1d54cea6700146bf28262dc06f9bfa6a7b429cf1626df050dd tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.40.el5_9.x86_64.rpm 5de43d1d924fca427bb60039c35d547f15468e92fbd985106bd72834ad5ea23d tomcat5-server-lib-5.5.23-0jpp.40.el5_9.x86_64.rpm 3428bae73eda5c8b4d6281e8880ba0684288332b0666f455d98b4a9eb83e5e85 tomcat5-servlet-2.4-api-5.5.23-0jpp.40.el5_9.x86_64.rpm 851b4e4da280418cc093e27c1d0b5f09581110aa504892e05aebf68fab7c5776 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.40.el5_9.x86_64.rpm bc50ab77d0ca38788e7f2d73c45cc5550ac00b3cc07c04165192614dbc9ce4d0 tomcat5-webapps-5.5.23-0jpp.40.el5_9.x86_64.rpm Source: 83e94d9fdf8f5dd5c433477d5c93724afc9077b816a4aa367747b21ae05ca92d tomcat5-5.5.23-0jpp.40.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 29 May 2013 08:24:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0868 Moderate CentOS 6 haproxy Update To: centos-announce(a)centos.org Message-ID: <20130529082429.GA53738(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0868 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0868.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f34166210421d7e7a5f4754b19563ff5f09027ba369a9cd60bd51114231ae89c haproxy-1.4.22-4.el6_4.i686.rpm x86_64: 63adcb393fd5cd2b4688bf28c40d58d2e504976470b1c590c7b5b2c1339f0dba haproxy-1.4.22-4.el6_4.x86_64.rpm Source: 12493f2e35943c87e8ca20d81e03311d7863b41b055dd488aeaecd5857d7240b haproxy-1.4.22-4.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 29 May 2013 08:25:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0869 Important CentOS 6 tomcat6 Update To: centos-announce(a)centos.org Message-ID: <20130529082500.GA53899(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0869 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0869.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 71cf32f8d0b8bf929e1b205104d7d9e34cf33cf29771b52006c6525752f8a3eb tomcat6-6.0.24-55.el6_4.noarch.rpm 4384b3dbe6d5128ce87f93cb4c6aea9dd72e6d654ab99cf73bdf33d092144bcf tomcat6-admin-webapps-6.0.24-55.el6_4.noarch.rpm 23e0000f9b193ece184d072594ee9e21d9dca24860879fb9ee969c3092d6fe5f tomcat6-docs-webapp-6.0.24-55.el6_4.noarch.rpm b3b2f92469891a3d33f82ed4d8e6a4157d5d159c4c8a1ecb95a6a50e01cfa1de tomcat6-el-2.1-api-6.0.24-55.el6_4.noarch.rpm 08abab2bcd43825f132a926684eb75cb73df7d973cbc0ebf0d1f845d7a0c980f tomcat6-javadoc-6.0.24-55.el6_4.noarch.rpm 8e9aaa1a741a5877f876e6dbf60a9dca7453a5af9d1a569affa7bd1d4867de3e tomcat6-jsp-2.1-api-6.0.24-55.el6_4.noarch.rpm a09570ac190da06adf0db3fb22d49249bed8a3db2cdba59e760a861020f3444e tomcat6-lib-6.0.24-55.el6_4.noarch.rpm 78345e3dcc99a57b13ffbe3e93dd3e3a6321ba8d85a0b848621bf6a06c606525 tomcat6-servlet-2.5-api-6.0.24-55.el6_4.noarch.rpm bc07d4db221573e25785eea2652d81296baed8dd38792e08514596d75a5467bf tomcat6-webapps-6.0.24-55.el6_4.noarch.rpm x86_64: 71cf32f8d0b8bf929e1b205104d7d9e34cf33cf29771b52006c6525752f8a3eb tomcat6-6.0.24-55.el6_4.noarch.rpm 4384b3dbe6d5128ce87f93cb4c6aea9dd72e6d654ab99cf73bdf33d092144bcf tomcat6-admin-webapps-6.0.24-55.el6_4.noarch.rpm 23e0000f9b193ece184d072594ee9e21d9dca24860879fb9ee969c3092d6fe5f tomcat6-docs-webapp-6.0.24-55.el6_4.noarch.rpm b3b2f92469891a3d33f82ed4d8e6a4157d5d159c4c8a1ecb95a6a50e01cfa1de tomcat6-el-2.1-api-6.0.24-55.el6_4.noarch.rpm 08abab2bcd43825f132a926684eb75cb73df7d973cbc0ebf0d1f845d7a0c980f tomcat6-javadoc-6.0.24-55.el6_4.noarch.rpm 8e9aaa1a741a5877f876e6dbf60a9dca7453a5af9d1a569affa7bd1d4867de3e tomcat6-jsp-2.1-api-6.0.24-55.el6_4.noarch.rpm a09570ac190da06adf0db3fb22d49249bed8a3db2cdba59e760a861020f3444e tomcat6-lib-6.0.24-55.el6_4.noarch.rpm 78345e3dcc99a57b13ffbe3e93dd3e3a6321ba8d85a0b848621bf6a06c606525 tomcat6-servlet-2.5-api-6.0.24-55.el6_4.noarch.rpm bc07d4db221573e25785eea2652d81296baed8dd38792e08514596d75a5467bf tomcat6-webapps-6.0.24-55.el6_4.noarch.rpm Source: ba4934b58aaf0cf19ae68b6f3f3556026c3632fa510a6b0f075e9fc7b2124c66 tomcat6-6.0.24-55.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 14 ***********************************************

1 0

Wireless USB adaptor recommendation
by Todor Petkov 29 May '13

29 May '13

Hello, can someone recommend me wireless USB adaptor, which is supported in Centos 5.7? I found information about various chipsets, but nothing like "device X is OK". In most online stores the chipset is not announced. Thanks in advance.

3 2

Where did yum install monodevelop?
by Yves S. Garret 28 May '13

28 May '13

Hello all, I'm running CentOS 6.4. Today I tried installing monodevelop and this is the result of the installation: http://bin.cakephp.org/view/258829139 Now. When I went to my terminal and ran monodevelop... nothing. When I tried to locate the actual executable by running find . -name "*monodevelop*" (kinda overkill, but figured that I'd get this option out of the way), I couldn't find anything. So, now, I'm scratching my head and wondering what to do next :) . Where did I mess up? Am I not starting monodevelop correctly? If so, how should I start it?

7 21

Backup of large filesystems >500GB
by Mike Watson 28 May '13

28 May '13

I've a small system that I use to support a number of churches. I provide web and email for them. My current server is running CentOS 6.3 with paired 1TB drives in a RAID1 configuration. It works well. One filesystem is very large, >500GB, and contains numerous large files: SQL, docs, church libraries in ebook and digital form, plus stored videos of church services. My problem is that I've found no means of backing up that file system. Dump and tar both error out as exceeding the maximum size. Neither will backup just the video directory (the largest) even with compression. Backup will be to an external (USB) removable HD. Can any suggest a prog or a method to back up this filesystem? mw -- -- "Lose not thy airspeed, lest the ground rises up and smites thee." -- William Kershner http://crucis-court.com http://www.crucis.net/1632search

12 17

r-x and r-x.
by Johan Vermeulen 28 May '13

28 May '13

Dear All, I'm currently troubleshooting NetworkManger scripts. I see a difference in machine A : drwxr-xr-x 2 root root 4096 apr 24 16:33 . drwxr-xr-x 5 root root 4096 jan 9 12:13 .. -rwxr-xr-x 1 root root 175 jan 9 12:13 00-netreport -rwxr-xr-x 1 root root 335 okt 22 2012 04-iscsi -rwxr-xr-x 1 root root 345 jan 9 12:13 05-netfs -rwxr-xr-x 1 root root 926 sep 25 2012 10-dhclient -rwxr-xr-x 1 root root 301 apr 24 15:58 20-backuplauncher -rwxr-xr-x 1 root root 220 jun 22 2012 yum-NetworkManager-dispatcher and machine B: drwxr-xr-x. 2 root root 4096 apr 24 16:34 . drwxr-xr-x. 5 root root 4096 apr 23 12:06 .. -rwxr-xr-x. 1 root root 175 jan 9 12:13 00-netreport -rwxr-xr-x. 1 root root 345 jan 9 12:13 05-netfs -rwxr-xr-x. 1 root root 926 sep 25 2012 10-dhclient -rwxr-xr-x. 1 root root 326 apr 23 13:42 15-nfslauncher -rwxr-xr-x. 1 root root 307 apr 24 16:10 20-backuplauncher -rwxr-xr-x. 1 root root 220 jun 22 2012 yum-NetworkManager-dispatcher the difference being -rwxr-xr-x and -rwxr-xr-x. so with or without a dot (.) Does that mean anything? Thanks for any advise on this. Greetings, J. Opensource Software is the future.

12 25

CentOS-announce Digest, Vol 99, Issue 13
by centos-announce-request＠centos.org 28 May '13

28 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0863 CentOS 5 mkinitrd Update (Johnny Hughes) 2. CEBA-2013:0861 CentOS 6 mdadm Update (Johnny Hughes) 3. CEBA-2013:0862 CentOS 6 gzip Update (Johnny Hughes) 4. CEBA-2013:0864 CentOS 5 am-utils Update (Johnny Hughes) 5. CEBA-2013:0865 CentOS 6 xorg-x11-drv-mach64 Update (Johnny Hughes) 6. CEBA-2013:0866 CentOS 6 spice-server Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 27 May 2013 13:02:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0863 CentOS 5 mkinitrd Update To: centos-announce(a)centos.org Message-ID: <20130527130206.GA3112(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0863 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0863.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 01cf0a69042bfd510f083b8a37d0a716a32109d97c1363c5370ac8f2a5b8759f libbdevid-python-5.1.19.6-80.el5_9.i386.rpm c59f21046f0595dc3c762b319d8a8b8f36a158ee58a84c1be7ef28cc22de19af mkinitrd-5.1.19.6-80.el5_9.i386.rpm 04acffda31653e572eb63bd60cf05a87407652c0ddbb3d9c8aa396bf2651073c mkinitrd-devel-5.1.19.6-80.el5_9.i386.rpm 24dc70d563fb051c57d3385a3a2a6ac460009cae174e9bba0a83816b55be1f95 nash-5.1.19.6-80.el5_9.i386.rpm x86_64: 06442fef79ff6656b4803105c9e8aec0a4d7760409bf41160b61215e9318ac2a libbdevid-python-5.1.19.6-80.el5_9.x86_64.rpm c59f21046f0595dc3c762b319d8a8b8f36a158ee58a84c1be7ef28cc22de19af mkinitrd-5.1.19.6-80.el5_9.i386.rpm 582be74b8ef80ce6a310e0342ef27f96e6df2c936f020fca2fc90d64036b8fb7 mkinitrd-5.1.19.6-80.el5_9.x86_64.rpm 04acffda31653e572eb63bd60cf05a87407652c0ddbb3d9c8aa396bf2651073c mkinitrd-devel-5.1.19.6-80.el5_9.i386.rpm 4344e021eded662118170fbd92bdb8cb5b19988bf06ed980541d6aab0c2089be mkinitrd-devel-5.1.19.6-80.el5_9.x86_64.rpm 83b998efc85dc66611417087e01f302bdddd6616bb505855eb16324b502c26fa nash-5.1.19.6-80.el5_9.x86_64.rpm Source: f27071d8fdd54da34a66a626a6cf2eed8320761d1861c3e666776893ad0f9d70 mkinitrd-5.1.19.6-80.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 27 May 2013 13:57:56 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0861 CentOS 6 mdadm Update To: centos-announce(a)centos.org Message-ID: <20130527135756.GA59872(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0861 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0861.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 626913999bd96caedd88a3f303e9c80aadc247d5ffa721152e41d1dd6470eb01 mdadm-3.2.5-4.el6_4.1.i686.rpm x86_64: 365d8ff76ff6a2b7c1533bad61dfc7e245241342c17ae1b38d9a33e00f3456ec mdadm-3.2.5-4.el6_4.1.x86_64.rpm Source: d4a5e9402ae2618e6348f08c2c96a979840483d7cb4b98fff38f031835d5d472 mdadm-3.2.5-4.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 27 May 2013 13:58:11 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0862 CentOS 6 gzip Update To: centos-announce(a)centos.org Message-ID: <20130527135811.GA59949(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0862 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0862.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a96cfb5dcb8dbbeb16f84d9501447764241b3023ac87f3f8de10ab562cde5699 gzip-1.3.12-19.el6_4.i686.rpm x86_64: 3c589d91b359ba255bf950fde7c2d32ca91d0dcb306b6315f2070acb67968de4 gzip-1.3.12-19.el6_4.x86_64.rpm Source: 2b4f53dbacc16f5c61498f24ef3d70b609c7fc93e74192709f62d51aae4d7db4 gzip-1.3.12-19.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 27 May 2013 14:10:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0864 CentOS 5 am-utils Update To: centos-announce(a)centos.org Message-ID: <20130527141028.GA6488(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0864 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0864.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 930017193c925ce7bf5616cb06e39f020343298392ac0cbaee82283511ed3789 am-utils-6.1.5-5.el5_9.i386.rpm x86_64: d2c0f49b04db1253edba0f336862ac0333290c3cae971cb67a6508cb621344f2 am-utils-6.1.5-5.el5_9.x86_64.rpm Source: c6e2a320591f1fcd84457d6400f8b6d9671cdc2f15e1bfeb74ad152b442d13a1 am-utils-6.1.5-5.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 27 May 2013 16:09:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0865 CentOS 6 xorg-x11-drv-mach64 Update To: centos-announce(a)centos.org Message-ID: <20130527160918.GA16138(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0865 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0865.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d96572faafae1eeda3137c7c7b999f66114db3ac82e8ef159ea509cd50b4a72c xorg-x11-drv-mach64-6.9.3-4.1.el6_4.i686.rpm x86_64: eb0a215019ccc5e086497e79c3f3833ca5c384864bb3b1304101defe65a543bf xorg-x11-drv-mach64-6.9.3-4.1.el6_4.x86_64.rpm Source: d474d3441badbca6455b2d8f1d7e7ef17039b48c5dc640197cd0b970a945a0dc xorg-x11-drv-mach64-6.9.3-4.1.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 27 May 2013 16:09:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0866 CentOS 6 spice-server Update To: centos-announce(a)centos.org Message-ID: <20130527160947.GA16211(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0866 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0866.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: efe7b5b8ad917803dcdb69ff8c4d69d6a9ef070395ae16f57720b83a9d1c6acf spice-server-0.12.0-12.el6_4.1.x86_64.rpm 49d23f863ed3b9d158a6f20930b1c719bf54b5ba4eb94fb6eaf03675e56c6f92 spice-server-devel-0.12.0-12.el6_4.1.x86_64.rpm Source: df25e9c361e8d376f6b947ea1dcd491818e5ea3d7f110db6b85c2c288c1b7d58 spice-server-0.12.0-12.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 13 ***********************************************

1 0

Run multiple instance of apache
by HAJJ CHEHADE, Ahmad 28 May '13

28 May '13

Hello everybody, I am trying to run 2 instances of apache on centos since 2 weeks with no lucks :S, exactly on the same IP address but different port. I've set up two configuration as follow: /etc/httpd and /etc/httpd2, and I duplicated the httpd service, so now I have 2 httpd service each one run an httpd conf. Now when I am trying to restart the first httpd service, it give the following httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName but the status is OK. And when I try to restart the httpd2 service, it give the same error with a failed status. Some internet research told that I have to put a serverName in httpd.conf (server name was commented) so I change it with the hostname of my VM. Now when I try to restart httpd2 the error message disappear, but his status is always failed. N.B. My first httpd.conf don't have a serverName. My /etc/hosts contain only: 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 Any help will be appreciated. Thank you Ahmad HC This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

8 10

Dell R320 server
by Jerry Geis 26 May '13

26 May '13

Is there a way on Dell R320 (two power supplies and hardware RAID-1) on centos to get a message that a power supply is failing or that one of the hardware RAID disks is failing? Sure there is the front panel - but no-one is there ... Is that reported to linux/centos some way? This is my first R320. Thanks, Jerry

7 9

Centos 6.4: Possible bug in system-config-network-cmd
by Glenn Eychaner 25 May '13

25 May '13

I'm having a puzzling problem with system-config-network-cmd in CentOS 6.4. I have a workstation with a number of different grub boot configurations (a spare for a set of workstations, basically), each of which has a parameter MYHOST=<hostname>, and I am using system-config-network-cmd to set the boot configuration during the network process (using a small custom system service that runs just before network startup, reads the configuration name from /proc/cmdline and calls "system-config-network-cmd -p <configname>"). I have properly disabled NetworkManager, and have /etc/sysconfig/networking/devices and .../profiles set up correctly AFAIK (it was all copied from a CentOS 5 machine, and the hand links were maintained properly as needed; such a PITA that they got rid of the very nice GUI for this). This all works great, EXCEPT that if the machine is booted a fixed-IP profile, the the DHCP ifcfg file also winds up in /etc/sysconfig/network-scripts. So, if I have in profiles/dhcp/ifcfg-eth0_dhcp (with a hardlink in devices/, of course): TYPE=Ethernet DEVICE=eth0 HWADDR=<MAC redacted> BOOTPROTO=dhcp ONBOOT=yes USERCTL=no IPV6INIT=no PEERDNS=yes and in profiles/fixed/ifcfg-eth0_fixed GATEWAY=x.y.z.1 TYPE=Ethernet DEVICE=eth0 HWADDR=<MAC redacted> BOOTPROTO=none NETMASK=255.255.255.0 IPADDR=x.y.z.n ONBOOT=yes USERCTL=no IPV6INIT=no PEERDNS=yes If I boot into fixed, I find that ifcfg-eth0_dhcp is also in network-scripts, and it tries to activate this interface, even though this interface is NOT in profiles/fixed in any way! This worked great in CentOS 5, so I think I know what I'm doing here? For now, I am "fixing" the issue by running a find on network-scripts to remove inappropriate files after running systme-config-network-cmd, but that is complete cheese, of course. Is there something missing from ifcfg-eth0_dhcp that is confusing the system-config-network-cmd script? Is there any documentation on this that's helpful? And is there simply a better way to do this that I've missed? Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

2 2

CentOS 5.9 LiveCD build on CentOS 6.4?
by Ljubomir Ljubojevic 25 May '13

25 May '13

Is it possible to create CentOS 5.9 LiveCD on CentOS 6.4 system? I am trying but getting following errors (rpmdb related): <snip> Installing: cups-pdf ################### [ 692/1011] semodule: SELinux policy is not managed or store cannot be accessed. rpmdb: /var/lib/rpm/Packages: unsupported hash version: 9 error: cannot open Packages index using db3 - Invalid argument (22) error: cannot open Packages database in /var/lib/rpm Installing: bluez-utils-cups ################### [ 693/1011] <snip> Installing: firefox ################### [ 868/1011] warning: google-earth-stable-6.0.3.2197-0.i386: Header V4 DSA/SHA1 Signature, key ID 7fac5991: NOKEY Installing: google-earth-stable ################### [ 869/1011] rpmdb: /var/lib/rpm/Packages: unsupported hash version: 9 error: cannot open Packages index using db3 - Invalid argument (22) error: cannot open Packages database in /var/lib/rpm error: /tmp/google.sig.G17031: import failed. [ OK ] atd: [ OK ] job 1 at 2013-05-18 06:53 <snip> Installing: pam_passwdqc ################### [1010/1011] Installing: rdist ################### [1011/1011] rpmdb: Program version 4.7 doesn't match environment version 0.128 error: db3 error(-30971) from dbenv->open: DB_VERSION_MISMATCH: Database environment version mismatch error: cannot open Packages index using db3 - (-30971) error: cannot open Packages database in /var/tmp/imgcreate-NYkHAD/install_root/var/lib/rpm Program version 4.7 doesn't match environment version 0.128 Program version 4.7 doesn't match environment version 0.128 umount: /var/tmp/imgcreate-NYkHAD/install_root/proc: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) lazy umount succeeded on /var/tmp/imgcreate-NYkHAD/install_root//proc umount: /var/tmp/imgcreate-NYkHAD/install_root: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) Unmounting directory /var/tmp/imgcreate-NYkHAD/install_root failed, using lazy umount lazy umount succeeded on /var/tmp/imgcreate-NYkHAD/install_root loop: can't delete device /dev/loop10: Device or resource busy Traceback (most recent call last): File "/usr/bin/livecd-creator", line 150, in <module> sys.exit(main()) File "/usr/bin/livecd-creator", line 133, in main creator.install() File "/usr/lib/python2.6/site-packages/imgcreate/creator.py", line 666, in install ayum.runInstall() File "/usr/lib/python2.6/site-packages/imgcreate/yuminst.py", line 215, in runInstall ret = self.runTransaction(cb) File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 1596, in runTransaction self.verifyTransaction(resultobject, vTcb) File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 1625, in verifyTransaction if not self.rpmdb.contains(po=txmbr.po): File "/usr/lib/python2.6/site-packages/yum/packageSack.py", line 127, in contains return bool(self.searchNevra(name=name, arch=arch, epoch=epoch, ver=ver, rel=rel)) File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 1197, in searchNevra return self._search(name, epoch, ver, rel, arch) File "/usr/lib/python2.6/site-packages/yum/rpmsack.py", line 1271, in _search mi = ts.dbMatch('name', name) _rpm.error: rpmdb open failed -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant

2 2

Libcurl.so.3: wherefore art thou?
by Gilbert Sebenste 25 May '13

25 May '13

I am utterly stumped. I need libcurl.so.3 for CentOS 6.4. I have Googled everything and I have been going all over the Internet looking for a solution. I give up; I need help. The error message I get when I try to run a program is: error while loading shared libraries: libcurl.so.3: cannot open shared object file: No such file or directory I have: Package libcurl-7.19.7-36.el6_4.i686 already installed and latest version Package python-pycurl-7.19.0-8.el6.i686 already installed and latest version Package curl-7.19.7-36.el6_4.i686 already installed and latest version Package libcurl-devel-7.19.7-36.el6_4.i686 already installed and latest version I also have git installed (yes, I know about the EPEL conflict giving me a 5.9 version) and I do have the CentOS 6 version installed)...no dice. Can anyone help me? Gilbert ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

4 6

Failed to create /dev/loop0p* entries for partitions inside loopback devices
by Gelen James 24 May '13

24 May '13

centos 6 failed to create entries under /dev for newly created loopback devices. Any one know why? and how to fix/workaround it? The steps to duplicate is pretty simple dd if=/dev/zero of=/tmp/deleteme bs=1M count=100 losetup /dev/loop0 /tmp/deleteme fdisk /dev/loop0 ## created partitions 1, 2, etc. fdisk -l /dev/loop0 ## confirmed that the partitions do exist mkfs.ext3 /dev/loop0p1 ## failed here, the error prompt says that the /dev/loop0p1 doesn't exist! ls /dev/loop0p* ## no entries Please shed a light here, I'm running centos 6.4 Thanks. Robert

2 2

CentOS 6 and PHP
by Glenn Eychaner 24 May '13

24 May '13

Still upgrading CentOS 5 to CentOS 6, and have run into the next issue: When I install httpd and php, everything works great, and the default-test "<?php phpinfo(); ?>" works great. The problem is that I have a bunch of old HTML that seems to use "<?" alone (or worse, "<!--?"), which worked in CentOS 5 but fails in CentOS 6. I can change all the HTML, but is there an easier way? Summary of previous issues: system-config-network-cmd leaving behind "ifcfg" files in network-scripts that it shouldn't: I still don't have an answer for this one; I work around it by naming all the scripts "ifcfg-ethX_<profile>" and cleaning any that don't match <profile> after running system-config-network-cmd. I suspect it has to do with either the contents of /etc/udev/rules.d/70-persistant-net.rules or the format of my ifcfg-ethX_* files, but haven't been able to resolve it. Probably will leave it as "workaround works". UUIDs and boot drives: Didn't solve this one either, but again didn't try very hard because the recovery from a failed attempt is a royal pain. I decided that the actual UUIDs weren't important enough to me to matter, since I seldom boot with more than one workstation's drive connected at a time. I will probably go back to labels, since I can change those (apparently) without rendering the system unbootable. Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

2 1

Enable HT on CentOS 6.4 (Dell R720 64 Bit server)
by Kaushal Shriyan 24 May '13

24 May '13

Hi, I have HT Feature available on my Dell Server R720. Please help me understand if HT is enabled on the server, will there be a performance impact. What are the deciding factors to enable HT on the servers. Regards Kaushal

2 1

CentOS-announce Digest, Vol 99, Issue 12
by centos-announce-request＠centos.org 24 May '13

24 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0858 CentOS 6 coreutils Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 23 May 2013 15:14:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0858 CentOS 6 coreutils Update To: centos-announce(a)centos.org Message-ID: <20130523151405.GA51390(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0858 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0858.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e612f1b61dabaa9bfeef283faa700134d623fef7f9c081f48b51ae7f5d020376 coreutils-8.4-19.el6_4.2.i686.rpm c1b3038de5dc8c7d4e93432b26da64f73698ea215837cab0c302f3b66ac159e4 coreutils-libs-8.4-19.el6_4.2.i686.rpm x86_64: a292373822a9427bef5a57e1c2076d649434d35d0ca352bcaee19f3317d55b54 coreutils-8.4-19.el6_4.2.x86_64.rpm cc623483c1d1334df9bf80fda4ca091d237f6c19a7247d42fbe13ea089f3eddd coreutils-libs-8.4-19.el6_4.2.x86_64.rpm Source: 904d1260a79a533b0beea283cb1f027a92e35551deebb2fe4019b1559f766283 coreutils-8.4-19.el6_4.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 12 ***********************************************

1 0

Changing disk UUID after cloning
by Glenn Eychaner 24 May '13

24 May '13

So, I have a CentOS 6 system, and I want to make several clones of it. I'm using Clonezilla to clone the drives; that's no problem. But the drive UUIDs are driving me up the wall. After cloning, the two drives have the same UUID, but I'd like each clone to have different UUIDs so there's no possibility of a conflict when I am running diagnostics with two drives installed, etc. But when I change the UUID of the /boot or / partition (even if I update /etc/fstab), the system won't boot; it GRUBs OK (after I use recovery mode to rerun grub-install), but never gets to the 'Welcome to CentOS " message. Do I need to "rebless" vmlinuz or initrd or initramfs in the /boot partition if I change the drive UUID? Or should I just ignore UUID and go back to using labels in /etc/fstab (which is what I did in CentOS 5)? Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

5 4

CentOS-announce Digest, Vol 99, Issue 11
by centos-announce-request＠centos.org 23 May '13

23 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0854 CentOS 6 vte Update (Johnny Hughes) 2. Release for CentOS-6.4 LiveCD and LiveDVD for i386 and x86_64 (Karanbir Singh) 3. CEBA-2013:0857 CentOS 6 qemu-kvm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 22 May 2013 17:17:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0854 CentOS 6 vte Update To: centos-announce(a)centos.org Message-ID: <20130522171734.GA17174(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0854 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0854.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a5fd4ed13fc0a3ff83a7fec625875c7901033ca7995057cd7b0e9f181f9a023c vte-0.25.1-8.el6_4.i686.rpm 9cba8a558f58101effb64a11f42638039ac139c01cc37d10b579f8b64b6c7ad9 vte-devel-0.25.1-8.el6_4.i686.rpm x86_64: a5fd4ed13fc0a3ff83a7fec625875c7901033ca7995057cd7b0e9f181f9a023c vte-0.25.1-8.el6_4.i686.rpm 181ae90c9641e5c73bc945cf957914463950bfbd5a7ba775afc514453f47a015 vte-0.25.1-8.el6_4.x86_64.rpm 9cba8a558f58101effb64a11f42638039ac139c01cc37d10b579f8b64b6c7ad9 vte-devel-0.25.1-8.el6_4.i686.rpm 346172102f88fd0fcecbd2c0a808b7b5c60f5a0ff8de84598e8922ce1a54da9a vte-devel-0.25.1-8.el6_4.x86_64.rpm Source: 4f3e50988eda272b1e447fad62272f884b625c63b9ce02b146fde0c6d41b5a1e vte-0.25.1-8.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 22 May 2013 18:23:45 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Release for CentOS-6.4 LiveCD and LiveDVD for i386 and x86_64 To: CentOS Announcements List <centos-announce(a)centos.org> Message-ID: <519CFF21.2050800(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 We are pleased to announce the immediate availability of CentOS-6.4 LiveCD and LiveDVD for the i386 and x86_64 architectures. Detailed Release Notes are available at http://wiki.centos.org/Manuals/ReleaseNotes/CentOSLiveDVD6.4 and http://wiki.centos.org/Manuals/ReleaseNotes/CentOSLiveCD6.4 +++++++++++++++++++++++ Overview The CentOS-6.4 LiveDVD and LiveCD are meant to be a Linux environment suited to be run directly from either Optical media or USB storage devices. It does not need any persistent storage on a machine, which also makes it a suitable recovery environment. The Live media are setup to run as full desktop environments and include most of the applications used in this role. +++++++++++++++++++++++ Download SHA256SUMs : 4677bb7d14f907e55936f991286c5d391519ada92428f71e82dac91b16bf671b CentOS-6.4-x86_64-LiveCD.iso 11822113016177b02bd80dbb35ae80f55db7b0590086b77bb661a4f7d40ee549 CentOS-6.4-i386-LiveCD.iso 1dee1e5f9df0278002b7da0279ed55afdf11abc5b889f4678ba43d70979e00f1 CentOS-6.4-x86_64-LiveDVD.iso 29e91fbfc30cab11661c38d767a0b1694cf57b994440575aa41b2c86a115e3e0 CentOS-6.4-i386-LiveDVD.iso The CentOS-6.4 Live media is released to all external mirrors and available for download now. List of mirrors is available at these urls : http://isoredirect.centos.org/centos/6/isos/i386/ http://isoredirect.centos.org/centos/6/isos/x86_64/ Due to the size of these DVDs, torrents have also been released and are being seeded at this time. The torrents are available at: http://mirror.centos.org/centos/6/isos/x86_64/CentOS-6.4-x86_64-LiveDVD.tor… http://mirror.centos.org/centos/6/isos/x86_64/CentOS-6.4-x86_64-LiveCD.torr… http://mirror.centos.org/centos/6/isos/i386/CentOS-6.4-i386-LiveDVD.torrent http://mirror.centos.org/centos/6/isos/i386/CentOS-6.4-i386-LiveCD.torrent Once you download the images, its important to verify contents using the sha256sum utility, against the published sums here. +++++++++++++++++++++++ Notes You can now install the Live environment to your hard disk (which wasn?t possible with the 5.x Live medias). Please note that you need more that 512Mb of ram to be able to use that ?install to hard drive? feature (If you have less than 512Mb of ram, you can install to disk but in text-mode, meaning that instead of clicking on the desktop icon, you have to launch a gnome-terminal and launch the ?liveinst? command from within the terminal) There is no upstream Live media product. The Live media produced within the CentOS Project is based on and around the livemedia tools from the Fedora Project. These LiveCD and LiveDVD only contains content found within the primary CentOS-6 distribution. No package from outside the distribution was included and no package has been changed from whats included in the base distribution. We appreciate all forms of feedback about these LiveDVD, including specific application inclusion requests or feature changes in future releases. The best place to provide this feedback is via the centos-devel mailing list ( http://lists.centos.org/ ) and feature requests via the issue tracker ( http://bugs.centos.org/ ). Enjoy! - -- Karanbir Singh, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlGc/yAACgkQMA29nj4Tz1tOKgCggp9eQI15zSoIJVn1e4pML4ku HAMAoKh+Ld5mu6ZvTTM2jteDfkElKDVH =IH0z -----END PGP SIGNATURE----- ------------------------------ Message: 3 Date: Wed, 22 May 2013 23:58:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0857 CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20130522235843.GA31396(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0857 Upstream details at : http://rhn.redhat.com/errata/RHBA-2013-0857.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fe27ea8edcd66481e96cc65daf5d69c26a06ce251f15ee056ac820b3bce3c8bb qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.3.i686.rpm x86_64: 69d528adf214da22f2d0371b6ab15c77d8e99eafae63f9def9e269636d101b9b qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm c83e3410c035ea6e4e88f16c5b26656ba84316e8c0260abd8a3de0bbbde78e8c qemu-guest-agent-win32-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 5a69c850ef9e55380dcc3e0c2b72bb7f9c365384f9892b96ccb0ddf5b3421710 qemu-img-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 69ba558a43a5dd5462c0cb3a174a98dc54f87eaba90cb7e5bc5fd224dc0948a4 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 3db5c8273f775ff3bea5836dcc396f3e886e6489a7819fdaa1430b017a2267b1 qemu-kvm-tools-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm Source: 4f865077cef2fad1d44522e253f5a67f203a7d5a1085bc8030b0312ddb745442 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 11 ***********************************************

1 0

Re: [CentOS] Changing disk UUID after cloning
by Glenn Eychaner 22 May '13

22 May '13

On May 22, 2013, at 4:14 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > Am 22.05.2013 21:58, schrieb Glenn Eychaner: >> So, I have a CentOS 6 system, and I want to make several clones of it. I'm using Clonezilla to clone the drives; that's no problem. But the drive UUIDs are driving me up the wall. After cloning, the two drives have the same UUID, but I'd like each clone to have different UUIDs so there's no possibility of a conflict when I am running diagnostics with two drives installed, etc. But when I change the UUID of the /boot or / partition (even if I update /etc/fstab), the system won't boot; it GRUBs OK (after I use recovery mode to rerun grub-install), but never gets to the 'Welcome to CentOS " message. Do I need to "rebless" vmlinuz or initrd or initramfs in the /boot partition if I change the drive UUID? > > for the inital boot /etc/fstab is *irrelevant* > logical thinking: if it can read it the partition is already mounted > > * at least GRUB config contains a line like "root=UUID=b935b5db-0051-4f7f-83ac-6a6651fe0988" Not on my system; CentOS 6 uses grub 0.97, and my grub.conf file doesn't contain any UUIDs that I can find. > * dracut / initramfs contains at least the UUID for /boot > * did yiou try "dracut -f" after the changes? That's probably the problem; I will make another attempt in the morning, if I decide that I care. I may simply decide that I don't care if I have duplicated UUIDs between workstations, if it becomes too much trouble to fix. :-) -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0

CentOS source rpm repository setup
by Toralf Lund 22 May '13

22 May '13

Hi. I thought I might set up my CentOS 6 system with a source rpm repository config, so that I'll be able to download srpm files via "yumdownloader --source" or similar. I'm thinking that in order to this, I have to add something like the following to the yum repos config: [base-source] name=CentOS-$releasever - Base (SRPMS) baseurl=http://mirror.centos.org/centos/$releasever/os/SRPMS gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #released updates [updates-source] name=CentOS-$releasever - Updates (SRPMS) baseurl=http://mirror.centos.org/centos/$releasever/updates/SRPMS gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 The question is, what I specify as "baseurl"? The above does not actually work, as http://mirror.centos.org/ does not have SRPMS subdirectories, although I believe it did in the past for earlier versions. So, does anyone know of URLs I can use instead? Thanks, - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 6

donneé un image iso de centos .merci
by jalila fattach 22 May '13

22 May '13

2 1

freenx not working with newly installed centos 6.4
by Natxo Asenjo 22 May '13

22 May '13

hi, this is not the same as http://bugs.centos.org/view.php?id=6298 I can login with ssh but not with freenx With 6.3 this worked, I just spinned some new servers and now I can no longer use freenx. in /var/log/messages: pr 3 22:05:11 testthuis nxserver[3435]: (nx) Failed login for user=admin from IP=192.168.0.160 Apr 3 22:06:01 testthuis nxserver[3619]: (nx) Failed login for user=admin from IP=192.168.0.160 Apr 3 22:06:52 testthuis nxserver[3818]: (nx) Failed login for user=admin from IP=192.168.0.160 in /var/log/nx/nxserver.log: -- NX SERVER START: -c /usr/bin/nxserver - ORIG_COMMAND= -- NX SERVER START: - ORIG_COMMAND= Info: Using fds #4 and #3 for communication with nxnode. HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: not detected) NX> 105 hello NXCLIENT - Version 3.2.0 NX> 134 Accepted protocol: 3.2.0 NX> 105 SET SHELL_MODE SHELL NX> 105 SET AUTH_MODE PASSWORD NX> 105 login NX> 101 User: admin NX> 102 Password: Info: Closing connection to slave with pid 3761. NX> 404 ERROR: wrong password or login NX> 999 Bye My node.conf file is a copy of the node.conf.sample file, nothing changed. I do not want to use the nx database authentication but our ldap (ipa) authentication., this has always worked until now. I have temporarily set selinux in permissive mode but no difference. Can anyone else reproduce this? At work we have a mirror, so I tried at home with a manually installed centos and internet upgrades. No difference. TIA, -- Groeten, natxo

5 15

CentOS-announce Digest, Vol 99, Issue 10
by centos-announce-request＠centos.org 22 May '13

22 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:0847 Moderate CentOS 5 kernel Update (Johnny Hughes) 2. CEBA-2013:0846 CentOS 5 xen Update (Johnny Hughes) 3. CEEA-2013:0852 CentOS 5 rgmanager Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 22 May 2013 00:42:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0847 Moderate CentOS 5 kernel Update To: centos-announce(a)centos.org Message-ID: <20130522004218.GA2167(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0847 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0847.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ab5044367344e995cb1eae8cfae59c2b6df68a8366ab6830b1b7fff6311de88e kernel-2.6.18-348.6.1.el5.i686.rpm 098b89256fe94e488bc11c7d7d5c9c633f26e6ce2f556027cb6a4c09d83c6b1a kernel-debug-2.6.18-348.6.1.el5.i686.rpm 07934a3d05a145d04f3174247f261ec83865876335ec30735b690a16d2155ffc kernel-debug-devel-2.6.18-348.6.1.el5.i686.rpm 9844fb6c5aa44ab6c81d364f5297d0a79312be417eaff79e14fc857b198c00c6 kernel-devel-2.6.18-348.6.1.el5.i686.rpm c677268f2a1d2eb32508693ccef0813e236b12909e8b32a785ccb472d53740e0 kernel-doc-2.6.18-348.6.1.el5.noarch.rpm de801934133ee709e3c513299db6f9e5876767e6a00ac55928ecad7d9762fdcd kernel-headers-2.6.18-348.6.1.el5.i386.rpm fe04425d4d7c8314ab42b7601be855c02d79a94dbeb5badce6c701acc35c11e6 kernel-PAE-2.6.18-348.6.1.el5.i686.rpm ef9181b7ff77bce3f1bec28a5e37360b8e64932f44531bc66c83216699e7e7e6 kernel-PAE-devel-2.6.18-348.6.1.el5.i686.rpm 765cf57dab52afb57f18bb84cc354f11ae3fa264b9b157bf84914cacb6db2b83 kernel-xen-2.6.18-348.6.1.el5.i686.rpm 347a8b9e89eea05d6b53e1b30fa5569593d62282c16561aff945e1604c7e4465 kernel-xen-devel-2.6.18-348.6.1.el5.i686.rpm x86_64: 02a6c7c2f002543eb61596fc3b16a3cb4a8a9d97218adb4caa8f2482fa062a94 kernel-2.6.18-348.6.1.el5.x86_64.rpm 4d0acfe18f15a26f2d32274a03e2daee04c7cd14043de85348c3e50cc513b5b8 kernel-debug-2.6.18-348.6.1.el5.x86_64.rpm 750bd839ca73cf262309eec0a34b82a2e14e2a5a64f1ad6d67eea47a8b8c95de kernel-debug-devel-2.6.18-348.6.1.el5.x86_64.rpm 1a2351ac39b3080b13e0904b6de03e4daa604f428ffdd038ff53402531977e30 kernel-devel-2.6.18-348.6.1.el5.x86_64.rpm c677268f2a1d2eb32508693ccef0813e236b12909e8b32a785ccb472d53740e0 kernel-doc-2.6.18-348.6.1.el5.noarch.rpm 0e84f4daf0c476e555c6ebf1ff261bd44c5e72a5bbe75fe5f574abb3376f7de4 kernel-headers-2.6.18-348.6.1.el5.x86_64.rpm 2df8bbdbb154d41d699bfec546d64d4ce80fddee4800657cd4c7d981f2519bc0 kernel-xen-2.6.18-348.6.1.el5.x86_64.rpm 96add8d6aeaa2c3cfc8fa2ea93b8ced13230353fbef3025e850d7e3858e704c3 kernel-xen-devel-2.6.18-348.6.1.el5.x86_64.rpm Source: 79f0fd50d589af4bc5772082dfd03ac7a6f1e1954f930c8c18583a84c9afdd56 kernel-2.6.18-348.6.1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 22 May 2013 01:26:35 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0846 CentOS 5 xen Update To: centos-announce(a)centos.org Message-ID: <20130522012635.GA3891(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0846 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0846.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ec631cb6cef6d16171547387d83540ee421f208c37e735064f03a4b61f920930 xen-3.0.3-142.el5_9.3.i386.rpm 52625a828dc04a4f501cad0e3e76c0f760a3934be4d079bad86c88b9ac730b1b xen-3.0.3-142.el5_9.3.i686.rpm a37c1d767aabc0be5a3510f2654ccccb7543fdfe31c9571d982f97666268674d xen-devel-3.0.3-142.el5_9.3.i386.rpm 81f01c550d014391e5008eae46189bee65229401ff197737cc4c7ecb1df7df16 xen-devel-3.0.3-142.el5_9.3.i686.rpm 558ccfff31589f7e2b46a501e9f730d7aea01b81941dd82746b49a4871c36abd xen-libs-3.0.3-142.el5_9.3.i386.rpm 6b1cd54270c7cedf43126b650d6cac68a7441badcaaed58639d439b0a7df8bc2 xen-libs-3.0.3-142.el5_9.3.i686.rpm x86_64: e98666d9db0a5110cc81e925a594ea7bda9a1a5e0fde99c521755db29ac92924 xen-3.0.3-142.el5_9.3.x86_64.rpm a37c1d767aabc0be5a3510f2654ccccb7543fdfe31c9571d982f97666268674d xen-devel-3.0.3-142.el5_9.3.i386.rpm 5feb695b37fd5dde27d223b55fcdf8437321f63f4cf6a228356b77e7ab4024a0 xen-devel-3.0.3-142.el5_9.3.x86_64.rpm 558ccfff31589f7e2b46a501e9f730d7aea01b81941dd82746b49a4871c36abd xen-libs-3.0.3-142.el5_9.3.i386.rpm 1d3f7879976677794109e382f561a36452e02035bb037b897f62e8d3861b0496 xen-libs-3.0.3-142.el5_9.3.x86_64.rpm Source: 9dbfd13241c4e3249f424d32ed6526e2b3662d969f3518dab3287b92926ae32b xen-3.0.3-142.el5_9.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 22 May 2013 11:50:54 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:0852 CentOS 5 rgmanager Update To: centos-announce(a)centos.org Message-ID: <20130522115054.GA3369(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:0852 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-0852.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1c3221b07eb1f14878c380a15e89e9467121295070034d3e3b45175e918bda9f rgmanager-2.0.52-37.el5.centos.2.i386.rpm x86_64: 4b8b522fb08f2002f9a407bc40f4e5bda7d17d22d25847de64c1643408d5ce85 rgmanager-2.0.52-37.el5.centos.2.x86_64.rpm Source: 6a4c446af0a5f6fde288b3385adae0fcaf02b2a4bb4001dd0b3d17b451656bd7 rgmanager-2.0.52-37.el5.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 10 ***********************************************

1 0

Re: [CentOS] Centos 6.4: Possible bug in system-config-network-cmd
by Glenn Eychaner 21 May '13

21 May '13

m.roth: > Hmmm... have you looked at /etc/udev/rules.d/70-persistant-net.rules? # PCI device 0x8086:0x104b (e1000e) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:16:xx:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10b7:0x9200 (3c59x) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:04:xx:xx;xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" Not sure there's anything relevant there... -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0

SuperMicro with LSI MegaRaid with Centos 6.0
by Gregory P. Ennis 21 May '13

21 May '13

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which had a driver for RH 3 and RH4, but not 5 and not 6. The interesting thing about this machine is that I had Centos 5.0 installed without difficulty (that over time upgraded to 5.9) Does anyone have any idea of a driver I could use to get Centos 6.0 up and running. Thanks!!!! Greg Ennis

2 5

Force anaconda to use GPT labels on all drives?
by Tucker 21 May '13

21 May '13

I did a quick search through the archive and couldn't find anything that mapped to my need, so I figured I should ping the community and see if anyone has the requisite knowledge and could point me in the right direction. *Succinct Version* Is there a way to, using updates.img, monkey patching or swapping in a newer Anaconda (>= 16) to force all disks to have gpt labels and not just disks> 2TB? *TL;DR Version* I'm working on setting up an installation environment and am trying to make it as machine agnostic as possible. We're currently using CentOS 6.3 (will start 6.4 work soon). Getting software on a machine is simple but laying out disks is less so. Some of our machines have eight disks and some twelve and some others have two. Normenpoughaalizing on a single hardware profile is not an option, due to the various types of systems we need. What I'm currently having to do is wipe the partition information and set a gpt label, in a %pre section, on the first two disks only. After that, I have to use our post installation installer to create the partitions on the remaining disks. Because of the way it works, unless we manually remove the partitions from the remaining partitions, prior to doing the post installation steps (which setup the host for its role), we will end up with drives that have old information (read as: not formatted). I understand that that normal way to do this is to use zerombr and clearpart but this leaves me with some disks that have msdos labels (<= 2TB) and some with gpt labels (> 2TB). In order to simplify everything, without having to be deterministic about hardware type, we need to use gpt labels on everything. It appears that Anaconda 16 and beyond use gpt labels by default (unless "nogpt" is provided as a kernel option) but CentOS (even 6.4) is using Anaconda 13. I've read about updates.img but I'm not sure that's the solution (if so, I don't grok it yet). I've managed to get Anaconda 17 to build from source (wow... that was "fun") but don't know enough kickstart/anaconda to know how and if I can swap that in place of the existing Anaconda images and still get CentOS to install. -- --tucker

2 3

ReiserFS - status?
by Rafał Radecki 21 May '13

21 May '13

Hi All. What is the status of ReiserFS in CentOS at the moment? I have some servers which use it as a loadable kernel module. I am thinking about a filesystem for database systems and would like to know if ReiserFS will be maintained in CentOS/Linux kernel in the future? Best regards, Rafal.

5 4

ICMPv6 Neighbour Solication request is not answered by linux when IPv6 address is assigned via Netlink code.
by Kevin Peterson 21 May '13

21 May '13

Hi, I have a process which is running as a linux service and assigns IP addresses using netlink to configued interface in linux. For IPv4 addresses i do not see any issue with this assignment. When i try to assign an IPv6 address, the address gets assigned successfully to the interface, but the Neighbour Solication request received for that address is not responded with and hence ping6 from a different machine doesn't work. When i take the same netlink code and run it in a sample program the address gets assigned and the Neighbour solicitation is responded with a advertisement and hence ping6 works. IP assigned by the program : 7000::15/32 IP on client machine from where ping6 is done : 7000::17/32. Bot machines are connected to same Layer-2 switch. I have flushed the ip6tables on both the machines just to rule out any firewall issues. Thanks, Kevin Peterson

2 3

semi-OT: flashing the BIOS on an HP dl580 GT, afterward
by m.roth＠5-cent.us 21 May '13

21 May '13

When last we saw our hero, er, sysadmin, he'd found that the "noarch" BIOS update was, in fact, a self-extracting .exe file, and he'd extracted it. Finally getting the ok to take the system down, the following hilarity (for small values of hilarity) ensued. First, booting off unetbootin to freedos was fine... except it was try to guess which version - freedos + emm386 + himem, no himem, live CD only, or, finally, "no drivers loaded", which works. It gags on something orders of magnitude larger than it was written for, y'know. Then I discover that the builtin type command does *not* have /p, and there's no more command, and I should have read the longer files before I started this. Fun with <ctrl-s> ensues. Finally, I find what are actually DOS config.sys files, with different extensions, and read them - they're one-liners, and find out how to run the rompaq.exe that runs the utility to flash the drives, and run it. And again. And again. And *finally* get the reason it's failing, and (to save the original name) copied the actual data from an 8.3 name into 7 char, which the utility demands: *exactly* seven chars, no more, no less. And unlike the Dell utility, which give you lots of warm fuzzies ("collecting data", "this is for this hardware, this is newer, do you want to update?"), this just does it. Fortunately, this HBS contains a backup ROM, just in case.... And a three-finger kill later, it's up. And I put the memory boards back in, so we'll see if the BIOS update fixed the memory problems (remember them? this song's about them).... mark

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss