- Discuss - lists.centos.org

Dell firmware repository - out of date firmware?
by Rafał Radecki 07 Feb '13

07 Feb '13

Hi All. I am using dell firmware repository (http://linux.dell.com/wiki/index.php/Repository/OMSA) To update all firmware on my Dell PowerEdge R310 I use: yum install $(bootstrap_firmware) update_firmware --yes and perform reboot. Then the firmware for my PERC H200 RAID controller is "up to date" with repository. When I make: /opt/dell/srvadmin/bin/omreport storage controller I get: ... Firmware Version : 07.03.05.00 ... Driver Version : 05.101.00.02 Minimum Required Driver Version : 07.00.01.00-1 ... So my driver is actually out of date. On page: https://www.dell.com/support/drivers/us/en/555/DriverDetails/Product/powere… I see that SAS-RAID_Firmware_NX9T4_LN32_07.03.05.00_A08.BIN for RHEL is available. It has a higher driver version than required 07.00.01.00-1 so a manual download and install should be ok in this case. Is the dell hardware repo serving old versions of firmware/drivers? Should I in my case perform a manual update process? Best regards, Rafal Radecki.

6 7

Gluster - data migration.
by Rafał Radecki 07 Feb '13

07 Feb '13

Hi All. I have two servers ("master" and "slave") with a replicated gluster volume. Recently I've had a problem with slave and gluster does not work on it now. So I would like to: - stop and remove current volume on master (on slave it is not accessible); - stop gluster software on master (already stopped on slave); - remove gluster software on master and slave (previous administrator used own built rpms, I would like to use http://download.gluster.org/pub/gluster/glusterfs/3.3/3.3.1/EPEL.repo/) - clean old information: setfattr -x trusted.glusterfs.volume-id /gluster setfattr -x trusted.gfid /gluster rm -rf /gluster/.glusterfs - rsync data from master to slave; - start gluster and create a volume with data in rsynced /gluster directory. Are there any pitfalls I should know about? Best regards, Rafal Radecki.

2 1

Gluster 3.3 - good to use?
by Rafał Radecki 07 Feb '13

07 Feb '13

Hi All. I want to use mentioned version of glusterfs in a simple master/slave setup (production servers). Two nodes have a replicated volume and the both mount it using glusterfs. What are your experiences with gluster 3.3? Is it stable? Have you had any serious problems? I do not have much experience with gluster and would like to avoid problems if possible. Best regards, Rafal Radecki.

1 0

Re: [CentOS] Too Many Running Process
by Prabhpal S. Mavi 07 Feb '13

07 Feb '13

Hi Reindl H. This is brilliant, best answer ever. one line says everything. I tested the server by assigning single CPU rather than 4 physical 6 core each. number became normal. Big thanks > the /0-/23 are NOT processes > these are KERNEL-THREADS > per logical CPU one of each thread > > Am 07.02.2013 11:51, schrieb Prabhpal S. Mavi: >> i have come across the problem where CentOS 6.3 x64 has more than 700 >> processes running. i am not sure where to start, what in normal or >> abnormal. >> >> [root@jet]# ps -A >> PID TTY TIME CMD >> 1 ? 00:00:03 init >> 2 ? 00:00:00 kthreadd >> 3 ? 00:00:00 migration/0 >> 4 ? 00:00:00 ksoftirqd/0 >> 5 ? 00:00:00 migration/0 >> 6 ? 00:00:00 watchdog/0 >> 7 ? 00:00:00 migration/1 >> 8 ? 00:00:00 migration/1 >> 9 ? 00:00:00 ksoftirqd/1 >> 10 ? 00:00:00 watchdog/1 >> 11 ? 00:00:00 migration/2 >> 12 ? 00:00:00 migration/2 >> 13 ? 00:00:00 ksoftirqd/2 >> 14 ? 00:00:00 watchdog/2 >> 15 ? 00:00:00 migration/3 >> 16 ? 00:00:00 migration/3 >> 17 ? 00:00:00 ksoftirqd/3 >> 18 ? 00:00:00 watchdog/3 >> 19 ? 00:00:00 migration/4 >> 20 ? 00:00:00 migration/4 >> 21 ? 00:00:00 ksoftirqd/4 >> 22 ? 00:00:00 watchdog/4 >> 23 ? 00:00:00 migration/5 >> 24 ? 00:00:00 migration/5 >> 25 ? 00:00:00 ksoftirqd/5 >> 26 ? 00:00:00 watchdog/5 >> 27 ? 00:00:00 migration/6 >> 28 ? 00:00:00 migration/6 >> 29 ? 00:00:00 ksoftirqd/6 >> 30 ? 00:00:00 watchdog/6 >> 31 ? 00:00:00 migration/7 >> 32 ? 00:00:00 migration/7 >> 33 ? 00:00:00 ksoftirqd/7 >> 34 ? 00:00:00 watchdog/7 >> 35 ? 00:00:00 migration/8 >> 36 ? 00:00:00 migration/8 >> 37 ? 00:00:00 ksoftirqd/8 >> 38 ? 00:00:00 watchdog/8 >> 39 ? 00:00:00 migration/9 >> 40 ? 00:00:00 migration/9 >> 41 ? 00:00:00 ksoftirqd/9 >> 42 ? 00:00:00 watchdog/9 >> 43 ? 00:00:00 migration/10 >> 44 ? 00:00:00 migration/10 >> 45 ? 00:00:00 ksoftirqd/10 >> 46 ? 00:00:00 watchdog/10 >> 47 ? 00:00:00 migration/11 >> 48 ? 00:00:00 migration/11 >> 49 ? 00:00:00 ksoftirqd/11 >> 50 ? 00:00:00 watchdog/11 >> 51 ? 00:00:00 migration/12 >> 52 ? 00:00:00 migration/12 >> 53 ? 00:00:00 ksoftirqd/12 >> 54 ? 00:00:00 watchdog/12 >> 55 ? 00:00:00 migration/13 >> 56 ? 00:00:00 migration/13 >> 57 ? 00:00:00 ksoftirqd/13 >> 58 ? 00:00:00 watchdog/13 >> 59 ? 00:00:00 migration/14 >> 60 ? 00:00:00 migration/14 >> 61 ? 00:00:00 ksoftirqd/14 >> 62 ? 00:00:00 watchdog/14 >> 63 ? 00:00:00 migration/15 >> 64 ? 00:00:00 migration/15 >> 65 ? 00:00:00 ksoftirqd/15 >> 66 ? 00:00:00 watchdog/15 >> 67 ? 00:00:00 migration/16 >> 68 ? 00:00:00 migration/16 >> 69 ? 00:00:00 ksoftirqd/16 >> 70 ? 00:00:00 watchdog/16 >> 71 ? 00:00:00 migration/17 >> 72 ? 00:00:00 migration/17 >> 73 ? 00:00:00 ksoftirqd/17 >> 74 ? 00:00:00 watchdog/17 >> 75 ? 00:00:00 migration/18 >> 76 ? 00:00:00 migration/18 >> 77 ? 00:00:00 ksoftirqd/18 >> 78 ? 00:00:00 watchdog/18 >> 79 ? 00:00:00 migration/19 >> 80 ? 00:00:00 migration/19 >> 81 ? 00:00:00 ksoftirqd/19 >> 82 ? 00:00:00 watchdog/19 >> 83 ? 00:00:00 migration/20 >> 84 ? 00:00:00 migration/20 >> 85 ? 00:00:00 ksoftirqd/20 >> 86 ? 00:00:00 watchdog/20 >> 87 ? 00:00:00 migration/21 >> 88 ? 00:00:00 migration/21 >> 89 ? 00:00:00 ksoftirqd/21 >> 90 ? 00:00:00 watchdog/21 >> 91 ? 00:00:00 migration/22 >> 92 ? 00:00:00 migration/22 >> 93 ? 00:00:00 ksoftirqd/22 >> 94 ? 00:00:00 watchdog/22 >> 95 ? 00:00:00 migration/23 >> 96 ? 00:00:00 migration/23 >> 97 ? 00:00:00 ksoftirqd/23 >> 98 ? 00:00:00 watchdog/23

1 0

Too Many Running Process
by Prabhpal S. Mavi 07 Feb '13

07 Feb '13

Dear List Users Greetings, i have come across the problem where CentOS 6.3 x64 has more than 700 processes running. i am not sure where to start, what in normal or abnormal. [root@jet]# ps -A PID TTY TIME CMD 1 ? 00:00:03 init 2 ? 00:00:00 kthreadd 3 ? 00:00:00 migration/0 4 ? 00:00:00 ksoftirqd/0 5 ? 00:00:00 migration/0 6 ? 00:00:00 watchdog/0 7 ? 00:00:00 migration/1 8 ? 00:00:00 migration/1 9 ? 00:00:00 ksoftirqd/1 10 ? 00:00:00 watchdog/1 11 ? 00:00:00 migration/2 12 ? 00:00:00 migration/2 13 ? 00:00:00 ksoftirqd/2 14 ? 00:00:00 watchdog/2 15 ? 00:00:00 migration/3 16 ? 00:00:00 migration/3 17 ? 00:00:00 ksoftirqd/3 18 ? 00:00:00 watchdog/3 19 ? 00:00:00 migration/4 20 ? 00:00:00 migration/4 21 ? 00:00:00 ksoftirqd/4 22 ? 00:00:00 watchdog/4 23 ? 00:00:00 migration/5 24 ? 00:00:00 migration/5 25 ? 00:00:00 ksoftirqd/5 26 ? 00:00:00 watchdog/5 27 ? 00:00:00 migration/6 28 ? 00:00:00 migration/6 29 ? 00:00:00 ksoftirqd/6 30 ? 00:00:00 watchdog/6 31 ? 00:00:00 migration/7 32 ? 00:00:00 migration/7 33 ? 00:00:00 ksoftirqd/7 34 ? 00:00:00 watchdog/7 35 ? 00:00:00 migration/8 36 ? 00:00:00 migration/8 37 ? 00:00:00 ksoftirqd/8 38 ? 00:00:00 watchdog/8 39 ? 00:00:00 migration/9 40 ? 00:00:00 migration/9 41 ? 00:00:00 ksoftirqd/9 42 ? 00:00:00 watchdog/9 43 ? 00:00:00 migration/10 44 ? 00:00:00 migration/10 45 ? 00:00:00 ksoftirqd/10 46 ? 00:00:00 watchdog/10 47 ? 00:00:00 migration/11 48 ? 00:00:00 migration/11 49 ? 00:00:00 ksoftirqd/11 50 ? 00:00:00 watchdog/11 51 ? 00:00:00 migration/12 52 ? 00:00:00 migration/12 53 ? 00:00:00 ksoftirqd/12 54 ? 00:00:00 watchdog/12 55 ? 00:00:00 migration/13 56 ? 00:00:00 migration/13 57 ? 00:00:00 ksoftirqd/13 58 ? 00:00:00 watchdog/13 59 ? 00:00:00 migration/14 60 ? 00:00:00 migration/14 61 ? 00:00:00 ksoftirqd/14 62 ? 00:00:00 watchdog/14 63 ? 00:00:00 migration/15 64 ? 00:00:00 migration/15 65 ? 00:00:00 ksoftirqd/15 66 ? 00:00:00 watchdog/15 67 ? 00:00:00 migration/16 68 ? 00:00:00 migration/16 69 ? 00:00:00 ksoftirqd/16 70 ? 00:00:00 watchdog/16 71 ? 00:00:00 migration/17 72 ? 00:00:00 migration/17 73 ? 00:00:00 ksoftirqd/17 74 ? 00:00:00 watchdog/17 75 ? 00:00:00 migration/18 76 ? 00:00:00 migration/18 77 ? 00:00:00 ksoftirqd/18 78 ? 00:00:00 watchdog/18 79 ? 00:00:00 migration/19 80 ? 00:00:00 migration/19 81 ? 00:00:00 ksoftirqd/19 82 ? 00:00:00 watchdog/19 83 ? 00:00:00 migration/20 84 ? 00:00:00 migration/20 85 ? 00:00:00 ksoftirqd/20 86 ? 00:00:00 watchdog/20 87 ? 00:00:00 migration/21 88 ? 00:00:00 migration/21 89 ? 00:00:00 ksoftirqd/21 90 ? 00:00:00 watchdog/21 91 ? 00:00:00 migration/22 92 ? 00:00:00 migration/22 93 ? 00:00:00 ksoftirqd/22 94 ? 00:00:00 watchdog/22 95 ? 00:00:00 migration/23 96 ? 00:00:00 migration/23 97 ? 00:00:00 ksoftirqd/23 98 ? 00:00:00 watchdog/23 99 ? 00:00:00 events/0 100 ? 00:00:00 events/1 101 ? 00:00:00 events/2 102 ? 00:00:00 events/3 103 ? 00:00:00 events/4 104 ? 00:00:00 events/5 105 ? 00:00:00 events/6 106 ? 00:00:00 events/7 107 ? 00:00:00 events/8 108 ? 00:00:00 events/9 109 ? 00:00:00 events/10 110 ? 00:00:00 events/11 111 ? 00:00:00 events/12 112 ? 00:00:00 events/13 113 ? 00:00:00 events/14 114 ? 00:00:00 events/15 115 ? 00:00:00 events/16 116 ? 00:00:00 events/17 117 ? 00:00:00 events/18 118 ? 00:00:00 events/19 119 ? 00:00:00 events/20 120 ? 00:00:00 events/21 121 ? 00:00:00 events/22 122 ? 00:00:00 events/23 123 ? 00:00:00 cgroup 124 ? 00:00:00 khelper 125 ? 00:00:00 netns 126 ? 00:00:00 async/mgr 127 ? 00:00:00 pm 128 ? 00:00:00 sync_supers 129 ? 00:00:00 bdi-default 130 ? 00:00:00 kintegrityd/0 131 ? 00:00:00 kintegrityd/1 132 ? 00:00:00 kintegrityd/2 133 ? 00:00:00 kintegrityd/3 134 ? 00:00:00 kintegrityd/4 135 ? 00:00:00 kintegrityd/5 136 ? 00:00:00 kintegrityd/6 137 ? 00:00:00 kintegrityd/7 138 ? 00:00:00 kintegrityd/8 139 ? 00:00:00 kintegrityd/9 140 ? 00:00:00 kintegrityd/10 141 ? 00:00:00 kintegrityd/11 142 ? 00:00:00 kintegrityd/12 143 ? 00:00:00 kintegrityd/13 144 ? 00:00:00 kintegrityd/14 145 ? 00:00:00 kintegrityd/15 146 ? 00:00:00 kintegrityd/16 147 ? 00:00:00 kintegrityd/17 148 ? 00:00:00 kintegrityd/18 149 ? 00:00:00 kintegrityd/19 150 ? 00:00:00 kintegrityd/20 151 ? 00:00:00 kintegrityd/21 152 ? 00:00:00 kintegrityd/22 153 ? 00:00:00 kintegrityd/23 154 ? 00:00:00 kblockd/0 155 ? 00:00:00 kblockd/1 156 ? 00:00:00 kblockd/2 157 ? 00:00:00 kblockd/3 158 ? 00:00:00 kblockd/4 159 ? 00:00:00 kblockd/5 160 ? 00:00:00 kblockd/6 161 ? 00:00:00 kblockd/7 162 ? 00:00:00 kblockd/8 163 ? 00:00:00 kblockd/9 164 ? 00:00:00 kblockd/10 165 ? 00:00:00 kblockd/11 166 ? 00:00:00 kblockd/12 167 ? 00:00:00 kblockd/13 168 ? 00:00:00 kblockd/14 169 ? 00:00:00 kblockd/15 170 ? 00:00:00 kblockd/16 171 ? 00:00:00 kblockd/17 172 ? 00:00:00 kblockd/18 173 ? 00:00:00 kblockd/19 174 ? 00:00:00 kblockd/20 175 ? 00:00:00 kblockd/21 176 ? 00:00:00 kblockd/22 177 ? 00:00:00 kblockd/23 178 ? 00:00:00 kacpid 179 ? 00:00:00 kacpi_notify 180 ? 00:00:00 kacpi_hotplug 181 ? 00:00:00 ata/0 182 ? 00:00:00 ata/1 183 ? 00:00:00 ata/2 184 ? 00:00:00 ata/3 185 ? 00:00:00 ata/4 186 ? 00:00:00 ata/5 187 ? 00:00:00 ata/6 188 ? 00:00:00 ata/7 189 ? 00:00:00 ata/8 190 ? 00:00:00 ata/9 191 ? 00:00:00 ata/10 192 ? 00:00:00 ata/11 193 ? 00:00:00 ata/12 194 ? 00:00:00 ata/13 195 ? 00:00:00 ata/14 196 ? 00:00:00 ata/15 197 ? 00:00:00 ata/16 198 ? 00:00:00 ata/17 199 ? 00:00:00 ata/18 200 ? 00:00:00 ata/19 201 ? 00:00:00 ata/20 202 ? 00:00:00 ata/21 203 ? 00:00:00 ata/22 204 ? 00:00:00 ata/23 205 ? 00:00:00 ata_aux 206 ? 00:00:00 ksuspend_usbd 207 ? 00:00:00 khubd 208 ? 00:00:00 kseriod 209 ? 00:00:00 md/0 210 ? 00:00:00 md/1 211 ? 00:00:00 md/2 212 ? 00:00:00 md/3 213 ? 00:00:00 md/4 214 ? 00:00:00 md/5 215 ? 00:00:00 md/6 216 ? 00:00:00 md/7 217 ? 00:00:00 md/8 218 ? 00:00:00 md/9 219 ? 00:00:00 md/10 220 ? 00:00:00 md/11 221 ? 00:00:00 md/12 222 ? 00:00:00 md/13 223 ? 00:00:00 md/14 224 ? 00:00:00 md/15 225 ? 00:00:00 md/16 226 ? 00:00:00 md/17 227 ? 00:00:00 md/18 228 ? 00:00:00 md/19 229 ? 00:00:00 md/20 230 ? 00:00:00 md/21 231 ? 00:00:00 md/22 232 ? 00:00:00 md/23 233 ? 00:00:00 md_misc/0 234 ? 00:00:00 md_misc/1 235 ? 00:00:00 md_misc/2 236 ? 00:00:00 md_misc/3 237 ? 00:00:00 md_misc/4 238 ? 00:00:00 md_misc/5 239 ? 00:00:00 md_misc/6 240 ? 00:00:00 md_misc/7 241 ? 00:00:00 md_misc/8 242 ? 00:00:00 md_misc/9 243 ? 00:00:00 md_misc/10 244 ? 00:00:00 md_misc/11 245 ? 00:00:00 md_misc/12 246 ? 00:00:00 md_misc/13 247 ? 00:00:00 md_misc/14 248 ? 00:00:00 md_misc/15 249 ? 00:00:00 md_misc/16 250 ? 00:00:00 md_misc/17 251 ? 00:00:00 md_misc/18 252 ? 00:00:00 md_misc/19 253 ? 00:00:00 md_misc/20 254 ? 00:00:00 md_misc/21 255 ? 00:00:00 md_misc/22 256 ? 00:00:00 md_misc/23 257 ? 00:00:00 khungtaskd 258 ? 00:00:00 kswapd0 259 ? 00:00:00 kswapd1 260 ? 00:00:00 kswapd2 261 ? 00:00:00 kswapd3 262 ? 00:00:00 ksmd 263 ? 00:00:00 khugepaged 264 ? 00:00:00 aio/0 265 ? 00:00:00 aio/1 266 ? 00:00:00 aio/2 267 ? 00:00:00 aio/3 268 ? 00:00:00 aio/4 269 ? 00:00:00 aio/5 270 ? 00:00:00 aio/6 271 ? 00:00:00 aio/7 272 ? 00:00:00 aio/8 273 ? 00:00:00 aio/9 274 ? 00:00:00 aio/10 275 ? 00:00:00 aio/11 276 ? 00:00:00 aio/12 277 ? 00:00:00 aio/13 278 ? 00:00:00 aio/14 279 ? 00:00:00 aio/15 280 ? 00:00:00 aio/16 281 ? 00:00:00 aio/17 282 ? 00:00:00 aio/18 283 ? 00:00:00 aio/19 284 ? 00:00:00 aio/20 285 ? 00:00:00 aio/21 286 ? 00:00:00 aio/22 287 ? 00:00:00 aio/23 288 ? 00:00:00 crypto/0 289 ? 00:00:00 crypto/1 290 ? 00:00:00 crypto/2 291 ? 00:00:00 crypto/3 292 ? 00:00:00 crypto/4 293 ? 00:00:00 crypto/5 294 ? 00:00:00 crypto/6 295 ? 00:00:00 crypto/7 296 ? 00:00:00 crypto/8 297 ? 00:00:00 crypto/9 298 ? 00:00:00 crypto/10 299 ? 00:00:00 crypto/11 300 ? 00:00:00 crypto/12 301 ? 00:00:00 crypto/13 302 ? 00:00:00 crypto/14 303 ? 00:00:00 crypto/15 304 ? 00:00:00 crypto/16 305 ? 00:00:00 crypto/17 306 ? 00:00:00 crypto/18 307 ? 00:00:00 crypto/19 308 ? 00:00:00 crypto/20 309 ? 00:00:00 crypto/21 310 ? 00:00:00 crypto/22 311 ? 00:00:00 crypto/23 316 ? 00:00:00 kthrotld/0 317 ? 00:00:00 kthrotld/1 318 ? 00:00:00 kthrotld/2 319 ? 00:00:00 kthrotld/3 320 ? 00:00:00 kthrotld/4 321 ? 00:00:00 kthrotld/5 322 ? 00:00:00 kthrotld/6 323 ? 00:00:00 kthrotld/7 324 ? 00:00:00 kthrotld/8 325 ? 00:00:00 kthrotld/9 326 ? 00:00:00 kthrotld/10 327 ? 00:00:00 kthrotld/11 328 ? 00:00:00 kthrotld/12 329 ? 00:00:00 kthrotld/13 330 ? 00:00:00 kthrotld/14 331 ? 00:00:00 kthrotld/15 332 ? 00:00:00 kthrotld/16 333 ? 00:00:00 kthrotld/17 334 ? 00:00:00 kthrotld/18 335 ? 00:00:00 kthrotld/19 336 ? 00:00:00 kthrotld/20 337 ? 00:00:00 kthrotld/21 338 ? 00:00:00 kthrotld/22 339 ? 00:00:00 kthrotld/23 340 ? 00:00:00 pciehpd 342 ? 00:00:00 kpsmoused 343 ? 00:00:00 usbhid_resumer 373 ? 00:00:00 kstriped 475 ? 00:00:00 scsi_eh_0 476 ? 00:00:00 scsi_eh_1 516 ? 00:00:00 scsi_eh_2 517 ? 00:00:00 vmw_pvscsi_wq_2 627 ? 00:00:00 jbd2/sda2-8 628 ? 00:00:00 ext4-dio-unwrit 629 ? 00:00:00 ext4-dio-unwrit 630 ? 00:00:00 ext4-dio-unwrit 631 ? 00:00:00 ext4-dio-unwrit 632 ? 00:00:00 ext4-dio-unwrit 633 ? 00:00:00 ext4-dio-unwrit 634 ? 00:00:00 ext4-dio-unwrit 635 ? 00:00:00 ext4-dio-unwrit 636 ? 00:00:00 ext4-dio-unwrit 637 ? 00:00:00 ext4-dio-unwrit 638 ? 00:00:00 ext4-dio-unwrit 639 ? 00:00:00 ext4-dio-unwrit 640 ? 00:00:00 ext4-dio-unwrit 641 ? 00:00:00 ext4-dio-unwrit 642 ? 00:00:00 ext4-dio-unwrit 643 ? 00:00:00 ext4-dio-unwrit 644 ? 00:00:00 ext4-dio-unwrit 645 ? 00:00:00 ext4-dio-unwrit 646 ? 00:00:00 ext4-dio-unwrit 647 ? 00:00:00 ext4-dio-unwrit 648 ? 00:00:00 ext4-dio-unwrit 649 ? 00:00:00 ext4-dio-unwrit 650 ? 00:00:00 ext4-dio-unwrit 651 ? 00:00:00 ext4-dio-unwrit 669 ? 00:00:00 flush-8:0 737 ? 00:00:00 udevd 1368 ? 00:00:00 vmmemctl 1547 ? 00:00:00 udevd 1548 ? 00:00:00 udevd 1589 ? 00:00:00 jbd2/sda1-8 1590 ? 00:00:00 ext4-dio-unwrit 1591 ? 00:00:00 ext4-dio-unwrit 1592 ? 00:00:00 ext4-dio-unwrit 1593 ? 00:00:00 ext4-dio-unwrit 1594 ? 00:00:00 ext4-dio-unwrit 1595 ? 00:00:00 ext4-dio-unwrit 1596 ? 00:00:00 ext4-dio-unwrit 1597 ? 00:00:00 ext4-dio-unwrit 1598 ? 00:00:00 ext4-dio-unwrit 1599 ? 00:00:00 ext4-dio-unwrit 1600 ? 00:00:00 ext4-dio-unwrit 1601 ? 00:00:00 ext4-dio-unwrit 1602 ? 00:00:00 ext4-dio-unwrit 1603 ? 00:00:00 ext4-dio-unwrit 1604 ? 00:00:00 ext4-dio-unwrit 1605 ? 00:00:00 ext4-dio-unwrit 1606 ? 00:00:00 ext4-dio-unwrit 1607 ? 00:00:00 ext4-dio-unwrit 1608 ? 00:00:00 ext4-dio-unwrit 1609 ? 00:00:00 ext4-dio-unwrit 1610 ? 00:00:00 ext4-dio-unwrit 1611 ? 00:00:00 ext4-dio-unwrit 1612 ? 00:00:00 ext4-dio-unwrit 1613 ? 00:00:00 ext4-dio-unwrit 1672 ? 00:00:00 kauditd 2191 ? 00:00:00 auditd 2247 ? 00:00:00 portreserve 2266 ? 00:00:00 rsyslogd 2329 ? 00:00:00 irqbalance 2344 ? 00:00:00 rpcbind 2362 ? 00:00:00 rpc.statd 2390 ? 00:00:00 rpciod/0 2391 ? 00:00:00 rpciod/1 2392 ? 00:00:00 rpciod/2 2393 ? 00:00:00 rpciod/3 2394 ? 00:00:00 rpciod/4 2395 ? 00:00:00 rpciod/5 2396 ? 00:00:00 rpciod/6 2397 ? 00:00:00 rpciod/7 2398 ? 00:00:00 rpciod/8 2399 ? 00:00:00 rpciod/9 2400 ? 00:00:00 rpciod/10 2401 ? 00:00:00 rpciod/11 2402 ? 00:00:00 rpciod/12 2403 ? 00:00:00 rpciod/13 2404 ? 00:00:00 rpciod/14 2405 ? 00:00:00 rpciod/15 2406 ? 00:00:00 rpciod/16 2407 ? 00:00:00 rpciod/17 2408 ? 00:00:00 rpciod/18 2409 ? 00:00:00 rpciod/19 2410 ? 00:00:00 rpciod/20 2411 ? 00:00:00 rpciod/21 2412 ? 00:00:00 rpciod/22 2413 ? 00:00:00 rpciod/23 2417 ? 00:00:00 rpc.idmapd 2437 ? 00:00:00 dbus-daemon 2448 ? 00:00:00 cupsd 2473 ? 00:00:00 acpid 2482 ? 00:00:00 hald 2483 ? 00:00:00 hald-runner 2523 ? 00:00:00 hald-addon-inpu 2528 ? 00:00:00 hald-addon-acpi 2548 ? 00:00:00 automount 2564 ? 00:00:00 opendkim 2565 ? 00:00:00 opendkim 2581 ? 00:00:00 snmpd 2593 ? 00:00:00 sshd 2615 ? 00:00:00 zabbix_agentd 2617 ? 00:00:00 zabbix_agentd 2618 ? 00:00:01 zabbix_agentd 2619 ? 00:00:01 zabbix_agentd 2620 ? 00:00:01 zabbix_agentd 2621 ? 00:00:00 zabbix_agentd 2644 ? 00:00:00 zabbix_server 2654 ? 00:00:00 xinetd 2662 ? 00:00:00 ntpd 2673 ? 00:00:00 vsftpd 2681 ? 00:00:00 clamd 2718 ? 00:00:00 mysqld_safe 2819 ? 00:00:06 mysqld 2865 ? 00:00:01 postmaster 2867 ? 00:00:00 postmaster 2869 ? 00:00:00 postmaster 2870 ? 00:00:00 postmaster 2871 ? 00:00:00 postmaster 2872 ? 00:00:00 postmaster 2874 ? 00:00:00 zabbix_server 2875 ? 00:00:00 zabbix_server 2876 ? 00:00:00 zabbix_server 2877 ? 00:00:00 zabbix_server 2879 ? 00:00:00 zabbix_server 2881 ? 00:00:00 zabbix_server 2882 ? 00:00:00 zabbix_server 2883 ? 00:00:00 zabbix_server 2884 ? 00:00:00 zabbix_server 2885 ? 00:00:00 zabbix_server 2886 ? 00:00:00 zabbix_server 2887 ? 00:00:00 zabbix_server 2890 ? 00:00:00 zabbix_server 2891 ? 00:00:00 zabbix_server 2893 ? 00:00:00 zabbix_server 2896 ? 00:00:00 zabbix_server 2897 ? 00:00:00 zabbix_server 2898 ? 00:00:00 zabbix_server 2900 ? 00:00:00 zabbix_server 2903 ? 00:00:00 zabbix_server 2905 ? 00:00:00 zabbix_server 2906 ? 00:00:00 zabbix_server 2907 ? 00:00:00 zabbix_server 2908 ? 00:00:00 zabbix_server 2909 ? 00:00:00 zabbix_server 2912 ? 00:00:00 zabbix_server 2934 ? 00:00:00 dovecot 2936 ? 00:00:00 anvil 2937 ? 00:00:00 log 2939 ? 00:00:00 config 2946 ? 00:00:00 saslauthd 2947 ? 00:00:00 saslauthd 2948 ? 00:00:00 saslauthd 2949 ? 00:00:00 saslauthd 2950 ? 00:00:00 saslauthd 2959 ? 00:00:02 amavisd 2967 ? 00:00:00 postgrey 3043 ? 00:00:00 master 3051 ? 00:00:00 pickup 3052 ? 00:00:00 qmgr 3067 ? 00:00:00 abrtd 3075 ? 00:00:00 abrt-dump-oops 3085 ? 00:00:00 denyhosts.py 3087 ? 00:00:00 amavisd 3090 ? 00:00:00 amavisd 3094 ? 00:00:00 httpd 3102 ? 00:00:00 crond 3112 ? 00:00:00 httpd 3114 ? 00:00:12 httpd 3118 ? 00:00:00 squid 3121 ? 00:00:00 squid 3122 ? 00:00:00 unlinkd 3123 ? 00:00:13 httpd 3132 ? 00:00:00 smbd 3138 ? 00:00:00 smbd 3143 ? 00:00:00 npcd 3153 ? 00:00:00 atd 3161 ? 00:00:00 python 3180 ? 00:00:00 nagios 3201 ? 00:00:00 ndo2db 3203 ? 00:00:00 postmaster 3212 ? 00:00:12 httpd 3213 ? 00:00:00 miniserv.pl 3222 tty1 00:00:00 mingetty 3224 tty2 00:00:00 mingetty 3226 ? 00:00:00 postmaster 3227 tty3 00:00:00 mingetty 3230 tty4 00:00:00 mingetty 3233 tty5 00:00:00 mingetty 3235 tty6 00:00:00 mingetty 3236 ? 00:00:00 postmaster 3250 ? 00:00:00 auth 3258 ? 00:00:00 ndo2db 3259 ? 00:00:00 ndo2db 3264 ? 00:00:00 sshd 3271 ? 00:00:12 httpd 3273 ? 00:00:00 postmaster 3281 ? 00:00:00 sshd 3282 pts/0 00:00:00 bash 3305 pts/0 00:00:00 su 3414 pts/0 00:00:00 bash 3511 ? 00:00:11 httpd 3550 ? 00:00:00 postmaster 4353 ? 00:00:03 httpd 4467 ? 00:00:05 httpd 4472 ? 00:00:00 tlsmgr 4474 ? 00:00:00 trivial-rewrite 4479 ? 00:00:00 smtpd 4500 ? 00:00:00 postmaster 4595 ? 00:00:00 postmaster 5411 ? 00:00:00 crond 5412 ? 00:00:00 crond 5420 ? 00:00:00 sh 5423 ? 00:00:00 sh 5426 ? 00:00:00 php 5430 ? 00:00:00 php 5435 ? 00:00:00 postmaster 5518 ? 00:00:00 postmaster 5654 ? 00:00:00 crond 5655 ? 00:00:00 crond 5656 ? 00:00:00 crond 5657 ? 00:00:00 crond 5658 ? 00:00:00 crond 5659 ? 00:00:00 sh 5663 ? 00:00:00 sh 5664 ? 00:00:00 sh 5665 ? 00:00:00 sh 5666 ? 00:00:00 sh 5667 ? 00:00:00 php 5671 ? 00:00:00 php 5672 ? 00:00:00 php 5673 ? 00:00:00 php 5674 ? 00:00:00 php 5676 ? 00:00:00 postmaster 5678 ? 00:00:00 postmaster 5679 ? 00:00:00 postmaster 5688 ? 00:00:02 sh 5701 ? 00:00:00 postmaster 5750 ? 00:00:00 sh 5751 ? 00:00:00 iostat 5752 ? 00:00:00 tail 5753 ? 00:00:00 head 5754 ? 00:00:00 awk 5755 pts/0 00:00:00 ps

2 1

CentOS-announce Digest, Vol 96, Issue 3
by centos-announce-request＠centos.org 06 Feb '13

06 Feb '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:0223 Moderate CentOS 6 kernel Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 6 Feb 2013 10:28:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0223 Moderate CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20130206102829.GA12510(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0223 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0223.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cc3e84adc6534d1c2be2437bab5c9b6db74d1f3cceb4fa67efd3f8e664e75583 kernel-2.6.32-279.22.1.el6.i686.rpm 492ca13ac771b0aaab6a99c9eb0b6c922983dc4690926f4c4ee786a4a8d9384b kernel-debug-2.6.32-279.22.1.el6.i686.rpm f8ad1bb925c688b6ab7ee1d5bdd955ba5cbec8e6e4e2e31d95fdc3eec751acd7 kernel-debug-devel-2.6.32-279.22.1.el6.i686.rpm 68033561c9ee9492362f35a6f78d93efe47b6cc60ca7240c73bea7b5aba8254e kernel-devel-2.6.32-279.22.1.el6.i686.rpm a2e4fc9c727c8a97fd2da4719ffc706bae18f7c0cbe8aa162fe3fe1cdb40e1ce kernel-doc-2.6.32-279.22.1.el6.noarch.rpm f2cd024d1f67e8cbedd822720c1124342e0476168efef404408276fe80b72f2c kernel-firmware-2.6.32-279.22.1.el6.noarch.rpm b5f02cdd8511e46d528a9f9b0185d96a905ef85673c076465f55d1b1670ee103 kernel-headers-2.6.32-279.22.1.el6.i686.rpm 91a42a2d6fd0d665bf22f95a47de971efa55479077529a3148b1eb49bb413c16 perf-2.6.32-279.22.1.el6.i686.rpm 623fe84fc54775c3b3f6bf54b803f5b9555f7231dd2ee6144095dc55d920aad4 python-perf-2.6.32-279.22.1.el6.i686.rpm x86_64: 4a678b7af346bc1ea7ac66cf69fc0de8ecbec9cb91f05bd387303057d92dbed4 kernel-2.6.32-279.22.1.el6.x86_64.rpm 56a6e487f8750a675b75764a08c37dfb8c8e966b5bf3dce295d4e8920104565e kernel-debug-2.6.32-279.22.1.el6.x86_64.rpm a30a4b7c3656c3798ad7a9a663f1f16bc68bfcdf00e1b75bad16e8751c4260b6 kernel-debug-devel-2.6.32-279.22.1.el6.x86_64.rpm 4b5c1bec03d23149032b7128be5908cea0039d0fc62838a6c894376f966d8622 kernel-devel-2.6.32-279.22.1.el6.x86_64.rpm a2e4fc9c727c8a97fd2da4719ffc706bae18f7c0cbe8aa162fe3fe1cdb40e1ce kernel-doc-2.6.32-279.22.1.el6.noarch.rpm f2cd024d1f67e8cbedd822720c1124342e0476168efef404408276fe80b72f2c kernel-firmware-2.6.32-279.22.1.el6.noarch.rpm 425fbc5d75754ce9a3c70eb718771251da3b5745e2084d0712a01b5c062960c9 kernel-headers-2.6.32-279.22.1.el6.x86_64.rpm 2164d64b74aa6ee15856ccb2682f82da0a3ce7966eb42876b4209e52d12cc610 perf-2.6.32-279.22.1.el6.x86_64.rpm 3fdd58d226b974ea8e85e74f7eca6c3cd1954a5600a948c79f0ed659f52d6b2a python-perf-2.6.32-279.22.1.el6.x86_64.rpm Source: 4882ec3b1227ea70e39e8e54dbe27746d1dd449f05a43395126e952a2378d149 kernel-2.6.32-279.22.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 96, Issue 3 **********************************************

1 0

Traffic shaping problem
by Bent Terp 06 Feb '13

06 Feb '13

Hi all, I tried last week to do traffic shaping on a production system, object of the exercise was simply to throttle the outgoing traffic. tc qdisc add dev eth4 root tbf rate 300mbit burst 300kb latency 50ms But the server became rather instable, crashing repeatedly without anything in the logs. Can anybody spot glaring mistakes in the tc command above, or tell me what I should have done instead? with kind regards, Bent Terp

3 2

Re: [CentOS] recent ruby packages?
by James B. Byrne 06 Feb '13

06 Feb '13

On Mon, February 4, 2013 19:01, Les Mikesell wrote: > On Mon, Feb 4, 2013 at 5:36 PM, Craig White <craig.white(a)ttiltd.com> > wrote: >> >> >> And lastly, Ruby is an ecosystem far beyond the base language. It >> has a 'gem' package management system which again is cross platform >> and even when you try to package ruby in rpm's, there's no way an RH >> or EPEL will keep up with updates. >> > > I guess I still don't understand why you think that is a good thing. > If the developers didn't get it right the first dozen times, why do > you think the next update will be better? That is, if EPEL can't keep > up, why would anyone want to? If you don't have the QA that a > packager does it means you have to do it yourself. > It is a good thing in the sense that the cost of entry for developers who provide Ruby extensions is very, very, low as all platforms Ruby runs on are essentially supported out of the box by RubyGems. If one becomes expert at RPM package building on RHEL/CentOS then how exactly does that expertise translate from RHEL into say Debian; or BSD; or OSX; or MS-Windows? It does not. On the other hand, any non-native language extension released as a RubyGem and pushed to rubygems.org is instantly available on every platform running a comparable version of Ruby. Further, with rubygems one has version control at the extension level with support for concurrent versions built in. Compare that with rpm where one has exactly one choice of a given package for the entire host. The problem with system packagers like rpm from a Ruby developers standpoint is that frequently developers are packaging language components that are extracted from a larger application and not the application itself. This is essentially how Ruby on Rails came to be released. In such cases a system level application package management system is simultaneously too large and too small for Ruby gems. It is too big in that it requires too much overhead to get it to work at all. It is too small because it only handles one Linus distribution and does nothing at all for any non-linux OS. One must think in terms of plugins when considering RubyGems. Firefox 10 ESR is packaged for CentOS as an rpm but most of the addons that make FF valuable to me are plugins obtained directly by FF from the Mozilla repository or from trusted third parties. These addons are not provided as rpms from RH and never will be. RubyGems serve much the same purpose as FF addons and they are implemented in a similar fashion; an extension belongs to the application and not to the system. As for not getting 'it' right, whatever 'it' is, Ruby is not a single implementation. The baseline is the MRI but there exists several alternative implementations including one written in Java. Each of these serves a different user audience while providing a common syntax. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 6

2way authentication for SSH?
by Rudi Ahlers 05 Feb '13

05 Feb '13

Hi, Does anyone know of a stable / working "2way authentication" system for SSH, and even web authentication services? Most of the banks in South Africa have a system that, when you want to make a payment, they send you an SMS and you need to verify the action with a secret code which was SMS'd to you. gmail also has this. Does anyone know of a "universal" plugin / application that can be used with SSH and even websites like Wordpress / Joolma / Webmin / etc? Any pointer would be appreciated. -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Cell: 082 554 7532 Fax: 086 268 8492

11 15

pymol
by m.roth＠5-cent.us 05 Feb '13

05 Feb '13

Anyone familiar with pymol? We're getting an error I find references to from a few years ago when we try to run remotely on a headless server. I can run it fine on my machine (CentOS 6.3, NVidia video), and on another person's workstation remotely, with other make video, but the server's got a Matrox - which shouldn't matter, since I'm running this after ssh -Y. pymol yum installed fine, no problems. I found, and did a export LIBGL_ALWAYS_INDIRECT=1, which allowed glxgears to work, albeit slowly and unevenly, but pymol always gives me freeglut (pymol): ERROR: Internal error <FBConfig with necessary capabilities not found> in function fgOpenWindow X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 4 (X_DestroyWindow) Resource id in failed request: 0x0 Serial number of failed request: 24 Current serial number in output stream: 27 PyMOL: abrupt program termination. I read that this is two errors, not one, but other than the environment variable, can't find any other fix. Anyone? mark

2 2

CentOS on IBM Z Series.
by Rafał Radecki 05 Feb '13

05 Feb '13

Hi All. I manage some IBM Z Series servers. But currently there are no system tools (like OMSA tools for Dell servers) installed. Is there a repository with tools/firmware updates for IBM servers for Linux/RHEL/CentOS? I've googled around but with no luck. I have found only this for power servers: http://www-304.ibm.com/webapp/set2/sas/f/lopdiags/yum.html Best regards, Rafal Radecki.

1 0

recent ruby packages?
by m.roth＠5-cent.us 05 Feb '13

05 Feb '13

Does anyone know of a repository that's *trustworthy* (gotta worry 'bout malware) with newer ruby rpm's than RHEL has? OT: the more I deal with ruby, the less I like it. Someone here was ready to move to a newer version, and from the ruby.org website, they're apparently actively hostile to all RH-related distros, even though we're the most common in North America. They've got a how to do it from debian and arch, how to use their own installer, and, oh, yes, they say a lot of their community feels you should build from source. Sorry, that's not my idea of a stable language that I'd ever recommend to someone.... mark

10 30

Java app not observing ACLs
by Nikolaos Milas 05 Feb '13

05 Feb '13

Hello, I have inherited a Java app, available as a jar, which has been moved from an HPUX server as is. [This app simply downloads a data file from an ftp server, processes its data and creates graph files.] It works fine on a CentOS 5 x86_64 machine with: jre-7u9-linux-x64.rpm but I've noticed it does not respect Linux ACLs. When run by a user who has access to a directory (where the app creates a file) only via ACLs (and not by basic user/group permissions), then I get "permission denied" issues. I've googled for the problem but have not been able to find references. Is anyone aware of such behavior and can suggest a solution? Thanks, Nick

1 0

Re: [CentOS] recent ruby packages?
by James B. Byrne 05 Feb '13

05 Feb '13

On Mon, February 4, 2013 10:21, m.roth(a)5-cent.us wrote: > Does anyone know of a repository that's *trustworthy* (gotta worry > 'bout malware) with newer ruby rpm's than RHEL has? I have not found one yet. > > OT: the more I deal with ruby, the less I like it. Someone here was > ready to move to a newer version, and from the ruby.org website, > they're apparently actively hostile to all RH-related distros, > even though we're the most common in North America. They've got > a how to do it from debian and arch, how to use their own installer, > and, oh, yes, they say a lot of their community feels you should > build from source. As the man says, Ruby is open source. If you have an itch then scratch it yourself. I had much the same issue with Ruby albeit on three platforms simultaneously, MS-Win, Apple-OSX and RHEL-Linux. In the end I went with Ruby Version Manager to save my sanity. However, RVM is a very intrusive bit of environment scripting and so I later switched to RBENV. That is a little lighter but I was still not satisfied with the amount of background work required to get Rails deployments to work with RVM/RBENV on different hosts. For development either RVM or RBENV is almost certainly the way to go for non-sysadmins. For deployments I am not so sure. I ended up building my own rpm packages using rpmdev and mock. After avoiding the issue for years I discovered that rolling your own rpms for Ruby is pretty simple, once you get a working spec file (which I eventually discovered and stole). If you care to go down that road I have provided a write up (spec file included) online at: http://byrnejb.wordpress.com/2013/01/30/building-ruby-1-9-3-for-centos-6-3/ > > Sorry, that's not my idea of a stable language that I'd ever recommend > to someone.... > > mark Yeah, well I can recall spending weeks on the phone with HP's tech response centre in Raleigh trying to get Cobol II to work as documented. Nobody asked me for my recommendation either. As for providing the packages, I am willing to send them to whoever wishes to host them. Even to CentOS extras if anyone would be kind enough to guide me through the administrative procedure to do so. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

CentOS-announce Digest, Vol 96, Issue 2
by centos-announce-request＠centos.org 05 Feb '13

05 Feb '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0226 CentOS 5 device-mapper-multipath Update (Johnny Hughes) 2. CEBA-2013:0225 CentOS 6 wpa_supplicant Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Feb 2013 12:33:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0226 CentOS 5 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20130204123351.GA8815(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0226 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0226.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e395a80d55cf988eb98dd34e1eefcacfd06addccf02bf0139b26ea841a239a2b device-mapper-multipath-0.4.7-54.el5_9.1.i386.rpm 1e79a640cd9eb694fbd67295b75752f74df345f4f823b043e263fd06036c474e kpartx-0.4.7-54.el5_9.1.i386.rpm x86_64: 6ef6083633fec59e3adba1c3467161ade17b519582b3879f177426266aa300aa device-mapper-multipath-0.4.7-54.el5_9.1.x86_64.rpm c172b2679de8baea077a29b45c9d88b9e42d9a956cc27491542dfaf50eec9cff kpartx-0.4.7-54.el5_9.1.x86_64.rpm Source: 166e670f133c202a5a87b8a890cac7c4a28ffb78f1979e76a30c4b2266157605 device-mapper-multipath-0.4.7-54.el5_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 4 Feb 2013 14:56:35 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0225 CentOS 6 wpa_supplicant Update To: centos-announce(a)centos.org Message-ID: <20130204145635.GA15107(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0225 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0225.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 498147d6e5691890b123be77e196d87dd79cc7f0fb8f5196647c4b83427be9cb wpa_supplicant-0.7.3-4.el6_3.i686.rpm x86_64: bd74814a2c0d0ba18f7ba447377158bdb0cf2d291641a64f060457ed40a3daa6 wpa_supplicant-0.7.3-4.el6_3.x86_64.rpm Source: ed37846bd2ee704242d29e5997ba645a6e0344ca0aa3d0b3fe601efffc5225f6 wpa_supplicant-0.7.3-4.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 96, Issue 2 **********************************************

1 0

intel_iommu=on => No root device found
by Nils Caspar 04 Feb '13

04 Feb '13

Hi all, for some reaseon, my message wasn't published. Second try, this time without the giant attachment. I have an Intel server (SR2600URBRPR) in front of me. The disks in my server are connected via PCI card (Adaptec RAID 3405). Now I would like to passthrough a PCI-E graphics card to a KVM guest. As this requires Intel VT-d, I configured the following options in the BIOS: Intel VT for Directed I/O [Enabled] Interrupt Remapping [Enabled] Coherency Support [Disabled] ATS Support [Enabled] Pass-through DMA Support [Enabled] Everything works so far, but when I add intel_iommu=on to the kernel line of my grub.conf, Dracut gives my a kernel panic while booting. I added "rdshell" to the command line and extracted the boot messages via dmesg (http://nilscaspar.ch/centos-dmesg.log) I think the main problem is this: dracut Warning: No root device "block:/dev/disk/by-uuid/280234d1-dff5-4e04-b1ef-93d54cdcd825" found But I doesn't make sense to me... As soon as I remove intel_iommu=on, everything works again (except the passthrough :P). Regards, Nils -- nilscaspar.ch

2 6

The moving of VNC port from 580n to 590n
by Robert Moskowitz 04 Feb '13

04 Feb '13

On my 'older' systems that include Centos 5.5 and Fedora 12, vncserver is running on ports 580n where n is defined by userid in the /etc/sysconfig/vncserver I just spent a bit of time getting it working on my new Centos 6.3 server and found it listening on ports 590n. When did the change occur? And guess I should test out where it is on Fedora 17...

9 12

weird issue with qemu-kvm network...
by skull 04 Feb '13

04 Feb '13

Hello CentOS mailinglist I am running CentOS 6.3 with qemu-kvm and libvirt. I was experimenting with bridged VM networking. Usually the VMs run over the network device virbr0. So i created a new bridge with brctl and added my eth0 to that bridge. Not touching virbr0 or it's configuration at all. Then i edited the configuration xml from my VM with 'virsh edit vmname'. After that i decided to restart my server, basically just to 'reset' my network. I know, that's not necessary. But it's easier than risking connection loss and having to get physical access to the server ;) After the restart my virbr0 network device was gone! cat /var/log/dmesg | grep virbr0 returned nothing. cat /var/log/messages | grep virbr0 brought up nothing aswell. I tried to reinstall all relevant packages with yum reinstall qemu-kvm python-virtinst virt-top virt-viewer libvirt libvirt-client libvirt-python qemu-kvm-tools But with no success :( Does anyone have an idea how to recreate the default virbr0? Is it doable via virsh? I don't have a DE installed on this server, so no virtual-manager. I am willing to go that far if it's worth it though.

3 11

Re: [CentOS] Alias for sending email messages from root
by James B. Byrne 04 Feb '13

04 Feb '13

On Tue, January 29, 2013 17:37, lists-centos wrote: > > James -- Look at the MAILFROM bit in crontab(5). > > > - Richard > That worked on CentOS-6 but does not on CentOS-5. I have rearranged things to run the tests solely from CentOS-6 boxes and using MAILFROM has circumvented the problem. Bell Canada is still 'working on a solution'. Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

skype not starting anymore, prelink issue?
by wwp 04 Feb '13

04 Feb '13

Hello there! I was running skype 4.1.0.20 on my 64-bit laptop for weeks (installed in /opt, from an official skype binary archive, plus few 32-bit stuff to get it working), when suddenly it stopped working, no way to start it: $ skype Fatal: QWidget: Must construct a QApplication before a QPaintDevice Aborted A quick search on the Internet brought some possible solution, basically configuring prelink to skip skype binary, uninstall skype, reinstall it. I was doubtful about uninstall/reinstall step since I didn't install it using a RPM but from a binary archive. Anyway I did it, restarted even the computer. No way to start skype. For now I'm stuck w/ an former staticQT 4.0.0.8 version of skype, which has no support for MSN accounts. Please note that I'm not using skype+msn because I want, but because I need to (@work). Did anybody ever solve this issue or has a clue about how to do it? Regards, -- wwp

2 6

Re: [CentOS] Multiple Virtual SSL sites with Apache httpd on CentOS 5
by J.Witvliet＠mindef.nl 04 Feb '13

04 Feb '13

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Eero Volotinen Sent: Monday, February 04, 2013 7:34 AM To: CentOS mailing list Subject: Re: [CentOS] Multiple Virtual SSL sites with Apache httpd on CentOS 5 2013/2/4 Harold Pritchett <harold(a)uga.edu>: > According to this post which is over 3 years old (http://tinyurl.com/69gr4ol) the apache httpd server now supports multiple ssl sites on the same server. This became effective > with release 2.2.12. It also requires OpenSSL 0.9.8f or later. Serving multiple ssl certificates requires SNI on server and also client support. http://www.rackspace.com/k nowledge_center/article/serving-secure-sites-with-sni-on-apache -----Original Message----- Biggest problem indeed with sni is that all intended clients must also support it... You might consider using IPv6, and give each (virtual) http-server its own address. That works very well indeed, but chat24 is that here also the clients must be able to connect over v6 ;-) Hw ______________________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

1 0

Python 3.3 for CentOS-6
by Florian La Roche 03 Feb '13

03 Feb '13

Hello, I've built python3-3.3 binary rpms based on the current Fedora packages. Binary rpms are built with koji/mock. Binary rpms are only tested very lightly, but I welcome additional tests or patches as well as additional python3 rpms people want to use: http://jur-linux.org/download/el-updates/6/ Has anyone a Django15 rpm using python3? greetings, Florian La Roche

1 0

X forwarding
by skull 02 Feb '13

02 Feb '13

How does one use X forwarding properly? I got a server running CentOS 6.3 at runlevel 3 (no DE installed) I try to access virt-manager via x-forwarding from another CentOS 6.3 client in my network (runlevel 5 with default gnome) on The server i changed my sshd_config: X11Forwarding yes i installed xauth on both of the machines. Anything else there is to do? When i try to: ssh -X root@server virt-manager I still get the following error message: RuntimeError: could not open display Which is in fact a message i get with every graphical programm i try to run through that. So I guess it's an error in my ssh configuration. Any tips?

2 2

Dell unofficial community repository - what do you think?
by Rafał Radecki 01 Feb '13

01 Feb '13

Hi all. I am currently gathering information about firmware update on Dell PowerEdge machines. I've found http://linux.dell.com/wiki/index.php/Firmware-tools_announcement and https://linux.dell.com/repo/community/ It is an unofficial, community supported repository. What are your experiences: should I perform firmware updates the traditional way by downloading *.bin packages from Dell and run them manually or should I use this repo? Is this repo "safe" and releases stable packages? Best regards, Rafal Radecki.

7 8

Re: [CentOS] CentOS 6.3: libreport/abrt update problem
by Fabien Archambault 01 Feb '13

01 Feb '13

2013/2/1 odusseas <piskopakis_antreas(a)hotmail.com>: > Luigi Rosa <lists@...> writes: > >> >> >> Mogens Kjaer said the following on 01/02/2013 07:52: >> >> > In updates, there are new packages of abrt and libreport. But yum update >> > gives me: Error: Package: abrt-2.0.8-6.el6.centos.2.x86_64 (updates) >> >> Confirmed. Same issue here. >> >> Ciao, >> luigi >> > > > The same problem also for me!! > any help?? > Cheers > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos You can just skip, temporarily the update of abrt with: yum update --exclude=abrt\* This should leave only abrt not updated (not a huge issue) or just wait a couple of days until it is fixed. Cheers, Fabien

2 1

CentOS 6.3: libreport/abrt update problem
by Mogens Kjaer 01 Feb '13

01 Feb '13

Hello, In updates, there are new packages of abrt and libreport. But yum update gives me: Error: Package: abrt-2.0.8-6.el6.centos.2.x86_64 (updates) Requires: libreport >= 2.0.9-5.el6_3.2 Removing: libreport-2.0.9-5.el6.centos.x86_64 (@base) libreport = 2.0.9-5.el6.centos Updated By: libreport-2.0.9-5.el6.centos.2.x86_64 (updates) libreport = 2.0.9-5.el6.centos.2 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Is the new libreport incorrectly named libreport-2.0.9-5.el6.centos.2.x86_64 instead of: libreport-2.0.9-5.el6.2.x86_64 or is the dependency of abrt incorrect? Mogens -- Mogens Kjaer, mk(a)lemo.dk http://www.lemo.dk

5 5

How to extract one file from rpm using yum?
by Robert Moskowitz 01 Feb '13

01 Feb '13

I want to get the original version of /etc/clamd.d/amavis.conf from the amavisd-new rpm to get the defaults to submit a bug report. I could not figure out how to do this, so I did a reinstall, but it did not replace this file (whatprovides says it comes from this rpm). Is there a way to extract just the one file, and better yet, place it elsewhere than its regular destination? thanks

8 10

Re: [CentOS] Opening a jar file from the desktop
by James B. Byrne 01 Feb '13

01 Feb '13

On Fri, February 1, 2013 10:59, Reindl Harald wrote: > java -jar superbcalc.jar Thank you. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Opening a jar file from the desktop
by James B. Byrne 01 Feb '13

01 Feb '13

I have java-1.7.0-openjdk installed on a CentOS-6.3 x86_64 system. On my desktop I have a jar file containing a calculator program which runs fine on CentOS-5 and on MS-Windows machines. On the CentOS-6 system when I right-click on the jar file and say open with java nothing apparently happens. When I double-click on it then I see a file browser window offering to extract the contents but there are no contents visible, only an empty / directory. If I go to the desktop in a terminal session and type java superbcalc.jar then I see this message: "Could not find or load main class superbcalc.jar" There is no CLASSPATH environment variable set by the system. If I provide one and include the current directory '.' I get the same error. CLASSPATH=. java superbcalc.jar Error: Could not find or load main class superbcalc.jar What has changed in CentOS-6 to stop this from working and how do I get jar files to open and run using Java both from the command line and from the desktop? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

error during yum update 6.3
by Steve Clark 01 Feb '13

01 Feb '13

Hello, Anybody else running into this. I am seeing it on two different CentOS boxes I have. yum --disablerepo=* --enablerepo=base,updates update ... ---> Package abrt.i686 0:2.0.8-6.el6.centos will be updated ---> Package abrt.i686 0:2.0.8-6.el6.centos.2 will be an update --> Processing Dependency: libreport >= 2.0.9-5.el6_3.2 for package: abrt-2.0.8-6.el6.centos.2.i686 ... ---> Package libreport.i686 0:2.0.9-5.el6.centos will be updated ---> Package libreport.i686 0:2.0.9-5.el6.centos.2 will be an update ... Error: Package: abrt-2.0.8-6.el6.centos.2.i686 (updates) Requires: libreport >= 2.0.9-5.el6_3.2 Removing: libreport-2.0.9-5.el6.centos.i686 (@base) libreport = 2.0.9-5.el6.centos Updated By: libreport-2.0.9-5.el6.centos.2.i686 (updates) libreport = 2.0.9-5.el6.centos.2 -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark(a)netwolves.com http://www.netwolves.com

3 2

Centos 6.3 - which repos to use?
by James Freer 01 Feb '13

01 Feb '13

I've just installed v6.3 as a desktop (from Centos-6.3-i386-LiveCD.iso) and to get the hang of the Centos approach and then hope to move on to a server. I've been using linux *buntu for 5 years. Hope i don't sound like a nit but i've got a little confused with the repos. Hoping someone would be kind enough just to clarify. This installation is for stability whilst installing the latest versions available. a] What happens if i select these? I assume that Centos6 is correct so why these? In software sources i have checked; Centos6-base, Centos6-extras, Centos6-updates unchecked; Centos6-contrib, Centos6-media, Centos6-plus i did check these three and media wouldn't, and plus wanted to suggest installation kernel 2.6 [gulp]. Each unchecked without installing. Then we also have the same for 6.0, 6.1, 6.2? b] So which repos to use as i'm unsure where apps are i want to use like efax (ok that's in), yumex, pyrenamer, llgal, abiword. at present i'm not sure which repos to use other than the one's i've mentioned. I then started to look at the repos http://wiki.centos.org/AdditionalResources/Repositories Centos extras and plus -- are these the same as above? CS/GFS, Centos testing, Fast track, debuginfo, contrib, CR - would seem not applicable to me. 3rd party repos rpmforge (DAG), and EPEL seem likely other repos seem likely to replace core packages which wouldn't be applicable. Google RPM gets a "use with care". I used the google browser on *buntu from their website with no problems so i was wondering what the problem would be and whether to use this repoo or the website. The fact that a maintainer has made this repo suggests a reason rather than just convenience. c] Could one just use pkgs.org to install from? My google "centos abiword" threw up yet another repo 'puias' and this has the latest Abiword version 2.8.6. http://pkgs.org/centos-6-rhel-6/puias-i386/abiword-2.8.6-3.puias6.i686.rpm.… I could just install from pkgs.org/centos-6 it would seem? Point is the repos are maintained by an expert rather than folk just downloading. I was then confused further by this http://miles.isb.bj.edu.cn/2012/03/09/how-to-install-abiword-on-centos-6-x6… One needs to add epal and rpmforge just for abiword? Surely the dependencies would be in the same repo I'm sure all is quite simple really but i'd be grateful for the guidance before i mess up an installation. thanks

16 55

Network stopped just out of the blue leaving this backtrace:
by Eliezer Croitoru 01 Feb '13

01 Feb '13

Network stopped just out of the blue leaving this backtrace After this or during this my network switch just stopped working ang got stuck. Maybe the switch made the problem? Thanks, Eliezer Feb 1 04:07:15 localhost kernel: ------------[ cut here ]------------ Feb 1 04:07:15 localhost kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Feb 1 04:07:15 localhost kernel: Hardware name: Feb 1 04:07:15 localhost kernel: NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out Feb 1 04:07:15 localhost kernel: Modules linked in: tcp_diag inet_diag bluetooth rfkill bnx2fc fcoe libfcoe libfc 8021q scsi_transport_fc garp scsi_tgt stp llc sunrpc xt_recent xt_state xt_multiport iptable_filter ipt_REDIRECT ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 iptable_raw xt_MARK xt_socket nf_conntrack nf_defrag_ipv4 ip6_tables nf_defrag_ipv6 iptable_mangle ip_tables ext2 ppdev parport_pc parport serio_raw sg i2c_i801 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix r8169 mii i915 drm_kms_helper drm i2c_algo_bit i2c_core video output dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] Feb 1 04:07:15 localhost kernel: Pid: 0, comm: swapper Not tainted 2.6.32-279.19.1.el6.centos.plus.x86_64 #1 Feb 1 04:07:15 localhost kernel: Call Trace: Feb 1 04:07:15 localhost kernel: <IRQ> [<ffffffff8106a1e7>] ? warn_slowpath_common+0x87/0xc0 Feb 1 04:07:15 localhost kernel: [<ffffffff8101c0fa>] ? intel_pmu_enable_all+0xba/0x160 Feb 1 04:07:15 localhost kernel: [<ffffffff8106a2d6>] ? warn_slowpath_fmt+0x46/0x50 Feb 1 04:07:15 localhost kernel: [<ffffffff8144e8dd>] ? dev_watchdog+0x26d/0x280 Feb 1 04:07:15 localhost kernel: [<ffffffff8107c67b>] ? internal_add_timer+0x9b/0x110 Feb 1 04:07:15 localhost kernel: [<ffffffff8144e670>] ? dev_watchdog+0x0/0x280 Feb 1 04:07:15 localhost kernel: [<ffffffff8107d2c7>] ? run_timer_softirq+0x197/0x340 Feb 1 04:07:15 localhost kernel: [<ffffffff810a0910>] ? tick_sched_timer+0x0/0xc0 Feb 1 04:07:15 localhost kernel: [<ffffffff8102adad>] ? lapic_next_event+0x1d/0x30 Feb 1 04:07:15 localhost kernel: [<ffffffff81072991>] ? __do_softirq+0xc1/0x1e0 Feb 1 04:07:15 localhost kernel: [<ffffffff81095510>] ? hrtimer_interrupt+0x140/0x250 Feb 1 04:07:15 localhost kernel: [<ffffffff8100c1cc>] ? call_softirq+0x1c/0x30 Feb 1 04:07:15 localhost kernel: [<ffffffff8100de05>] ? do_softirq+0x65/0xa0 Feb 1 04:07:15 localhost kernel: [<ffffffff81072775>] ? irq_exit+0x85/0x90 Feb 1 04:07:15 localhost kernel: [<ffffffff814f8fe0>] ? smp_apic_timer_interrupt+0x70/0x9b Feb 1 04:07:15 localhost kernel: [<ffffffff8100bb93>] ? apic_timer_interrupt+0x13/0x20 Feb 1 04:07:15 localhost kernel: <EOI> [<ffffffff812c999e>] ? intel_idle+0xde/0x170 Feb 1 04:07:15 localhost kernel: [<ffffffff812c9981>] ? intel_idle+0xc1/0x170 Feb 1 04:07:15 localhost kernel: [<ffffffff813fd8b7>] ? cpuidle_idle_call+0xa7/0x140 Feb 1 04:07:15 localhost kernel: [<ffffffff81009fc6>] ? cpu_idle+0xb6/0x110 Feb 1 04:07:15 localhost kernel: [<ffffffff814d80da>] ? rest_init+0x7a/0x80 Feb 1 04:07:15 localhost kernel: [<ffffffff81c22f7b>] ? start_kernel+0x424/0x430 Feb 1 04:07:15 localhost kernel: [<ffffffff81c2233a>] ? x86_64_start_reservations+0x125/0x129 Feb 1 04:07:15 localhost kernel: [<ffffffff81c22438>] ? x86_64_start_kernel+0xfa/0x109 Feb 1 04:07:15 localhost kernel: ---[ end trace 0bd7c853b258ec62 ]--- Feb 1 04:07:15 localhost kernel: r8169 0000:01:00.0: eth0: link up

1 0

CentOS-announce Digest, Vol 96, Issue 1
by centos-announce-request＠centos.org 01 Feb '13

01 Feb '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0212 CentOS 6 glibc Update (Johnny Hughes) 2. CESA-2013:0216 Important CentOS 5 freetype Update (Johnny Hughes) 3. CESA-2013:0214 Important CentOS 5 nss Update (Johnny Hughes) 4. CEBA-2013:0212 CentOS 6 glibc Update (Johnny Hughes) 5. CESA-2013:0213 Important CentOS 6 nspr Update (Johnny Hughes) 6. CESA-2013:0217 Important CentOS 6 mingw32-libxml2 Update (Johnny Hughes) 7. CESA-2013:0218 Moderate CentOS 6 xorg-x11-drv-qxl Update (Johnny Hughes) 8. CESA-2013:0219 Moderate CentOS 6 mysql Update (Johnny Hughes) 9. CESA-2013:0216 Important CentOS 6 freetype Update (Johnny Hughes) 10. CESA-2013:0215 Important CentOS 6 libreport Update (Johnny Hughes) 11. CESA-2013:0215 Important CentOS 6 abrt Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 31 Jan 2013 15:49:35 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0212 CentOS 6 glibc Update To: centos-announce(a)centos.org Message-ID: <20130131154935.GA10699(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0212 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0212.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 49895c07e6438541f8fcee9de7e61f917bb1059f5ecefa8797d7c3a45f7a0542 glibc-2.12-1.80.el6_3.7.i686.rpm 9ac3511106793afc32bf4db7fb6005352cc0f34b618fd84581361923529925dd glibc-common-2.12-1.80.el6_3.7.i686.rpm 941a2c8311e2c39d209eb8f4738c220b57bd8a1929c1d6cc64586ab2407db7c3 glibc-devel-2.12-1.80.el6_3.7.i686.rpm b1afc555f1f6b2e59b55a762d753edfa339b2de1a148905c341f0390013df35c glibc-headers-2.12-1.80.el6_3.7.i686.rpm ebf30b405afbd8b7a24fbeb23c9fdbaae551157a3bb3861311965184f9705683 glibc-static-2.12-1.80.el6_3.7.i686.rpm 140ec7848bceabc8188a7fe6778f6facab9d6fa762cd042cb180016b45a67375 glibc-utils-2.12-1.80.el6_3.7.i686.rpm 6dc9fa51750e1d36e0e75cda872bd42aa68ac5cf91874da69075a88eb5083512 nscd-2.12-1.80.el6_3.7.i686.rpm x86_64: 49895c07e6438541f8fcee9de7e61f917bb1059f5ecefa8797d7c3a45f7a0542 glibc-2.12-1.80.el6_3.7.i686.rpm 4466b6bfda35951eec957e925debd47af2f2ee7fa5fe62fc8f9a96a08f9f12b5 glibc-2.12-1.80.el6_3.7.x86_64.rpm b4e89bc58a60659a885be0713eb99e2425c1a58e22d30d3f229f6de33440202e glibc-common-2.12-1.80.el6_3.7.x86_64.rpm 941a2c8311e2c39d209eb8f4738c220b57bd8a1929c1d6cc64586ab2407db7c3 glibc-devel-2.12-1.80.el6_3.7.i686.rpm 2ebcd18ce2b7e05a57667b2b588d804c733e109ca25c748c5bdcecfa7502e121 glibc-devel-2.12-1.80.el6_3.7.x86_64.rpm 74ee89ddb7df516f06fe18e8fed848090769ff2a74f8a1adcdd343e9851c6e0e glibc-headers-2.12-1.80.el6_3.7.x86_64.rpm ebf30b405afbd8b7a24fbeb23c9fdbaae551157a3bb3861311965184f9705683 glibc-static-2.12-1.80.el6_3.7.i686.rpm f4febf76728c35459376fbd3622507f698805de1bf9b8649ba9b339c5e48d3a4 glibc-static-2.12-1.80.el6_3.7.x86_64.rpm 4195f0e0b661341bb06bc05055a389d605859bfe3683ceb3a8034f6d154bdc47 glibc-utils-2.12-1.80.el6_3.7.x86_64.rpm e31d1ecfcfcca92106095e72ba1d535aa87f4d841d02576f32cedf6a71534a0a nscd-2.12-1.80.el6_3.7.x86_64.rpm Source: 00a4acd908f62bef4b9b67942e1fc347a62aa19b9db0c7b677daa96160c217b7 glibc-2.12-1.80.el6_3.7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 31 Jan 2013 21:55:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0216 Important CentOS 5 freetype Update To: centos-announce(a)centos.org Message-ID: <20130131215544.GA31353(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0216 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0216.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cacc70568addbfa074947de9177b38da49f5a45361640dd4360e45252650bb81 freetype-2.2.1-32.el5_9.1.i386.rpm 0406d616a5c8fc7fccd343d6226a52fde050c8ae7a5ccc71a42eddece6621028 freetype-demos-2.2.1-32.el5_9.1.i386.rpm ca10d7bc4e1dc5dceac26529add39f6ca1660b086d6fd81b475185ed7a6ac3a1 freetype-devel-2.2.1-32.el5_9.1.i386.rpm x86_64: cacc70568addbfa074947de9177b38da49f5a45361640dd4360e45252650bb81 freetype-2.2.1-32.el5_9.1.i386.rpm 1fffcbb350ebb38bfcaa5a18cfc2ea6bbe42461d11cf0c642e88032f292651f0 freetype-2.2.1-32.el5_9.1.x86_64.rpm c59ebbfc5eaffa320569404a46f7de69ca6c99969dc02d158173a18530dfd280 freetype-demos-2.2.1-32.el5_9.1.x86_64.rpm ca10d7bc4e1dc5dceac26529add39f6ca1660b086d6fd81b475185ed7a6ac3a1 freetype-devel-2.2.1-32.el5_9.1.i386.rpm bf6a082d5d70e48a95444f7a0ecfa7e0e4cfe2dbd651c1fc183a9dce2b4aa01b freetype-devel-2.2.1-32.el5_9.1.x86_64.rpm Source: f12c161fcd00a6278ee2204306c84e63689b28421a805200b3981fea3393691b freetype-2.2.1-32.el5_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 31 Jan 2013 21:58:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0214 Important CentOS 5 nss Update To: centos-announce(a)centos.org Message-ID: <20130131215841.GA31595(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0214 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0214.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0cc8059ea73dfc88457a101080cdbffe999c34e2e11113e29d5164d9ae2af569 nspr-4.9.2-2.el5_9.i386.rpm 7074f2a9b08d29fa82d0c66dbda09d4c3242a7ca3a9c4b19bf0f7449517b65cb nspr-devel-4.9.2-2.el5_9.i386.rpm 16029039ca032ffce958953c8fea9cae8955c013a93e8a9ae0832f10d40cc5e7 nss-3.13.6-3.el5_9.i386.rpm e80971e8ed65bd9872ad780be62fa23d7812d7499f56ea8b19f0c3a63cb09945 nss-devel-3.13.6-3.el5_9.i386.rpm 1c625b6ff09dcc423e2da22d1fa107566fadf6d091751ce19880e58c7339a86f nss-pkcs11-devel-3.13.6-3.el5_9.i386.rpm 9ef285b564335e8df2241b9d64478e65da3097c4948c2243179c153658f23dda nss-tools-3.13.6-3.el5_9.i386.rpm x86_64: 0cc8059ea73dfc88457a101080cdbffe999c34e2e11113e29d5164d9ae2af569 nspr-4.9.2-2.el5_9.i386.rpm 94a64a0377aed96c931aa10255c90d41fc78d1fc59e7fe94d5a5fe13d6cfcd76 nspr-4.9.2-2.el5_9.x86_64.rpm 7074f2a9b08d29fa82d0c66dbda09d4c3242a7ca3a9c4b19bf0f7449517b65cb nspr-devel-4.9.2-2.el5_9.i386.rpm ca84498851244e166c4a26b88ee107abe2ea03d58c24d155590a281c42d61d59 nspr-devel-4.9.2-2.el5_9.x86_64.rpm 16029039ca032ffce958953c8fea9cae8955c013a93e8a9ae0832f10d40cc5e7 nss-3.13.6-3.el5_9.i386.rpm 66504c5bd514d0919ff8b9170aa9587f6332ae4d70f7df003b4a7cf093506c36 nss-3.13.6-3.el5_9.x86_64.rpm e80971e8ed65bd9872ad780be62fa23d7812d7499f56ea8b19f0c3a63cb09945 nss-devel-3.13.6-3.el5_9.i386.rpm 6ac0b087a4a03f61a82402f648f22071f7b0a257d173897430a471b79c50f3df nss-devel-3.13.6-3.el5_9.x86_64.rpm 1c625b6ff09dcc423e2da22d1fa107566fadf6d091751ce19880e58c7339a86f nss-pkcs11-devel-3.13.6-3.el5_9.i386.rpm d010d807d939017365568d016fa788fea4d5a240a7024b29b32c0a22dcb23737 nss-pkcs11-devel-3.13.6-3.el5_9.x86_64.rpm c8463457371032eddc7659d7cbc8befc4cc796121e43677d9ecd1fb19976b1e5 nss-tools-3.13.6-3.el5_9.x86_64.rpm Source: bbcf6dac3475641667363def0dd9cb165e5265dc55dd304d0db9cdad231bef38 nspr-4.9.2-2.el5_9.src.rpm c71dbc152e220e43b49f737939e01d5bc1c397294a1fdb163c584e12f72c49cf nss-3.13.6-3.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 1 Feb 2013 00:50:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0212 CentOS 6 glibc Update To: centos-announce(a)centos.org Message-ID: <20130201005005.GA8570(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0212 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0212.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 62527f00a955f3ad30cc1ab3e9b6871ed71d4c607729040194873943d89d8f9f glibc-2.12-1.80.el6_3.7.i686.rpm 3cb35a37c25728e0f17a3eff7df75e23ea85123c66f05d6b97e00cbdc9540012 glibc-common-2.12-1.80.el6_3.7.i686.rpm dbe7d58085786f153c1b53e474fc0af9f0599b669e0063e508f1bf2b74346d7e glibc-devel-2.12-1.80.el6_3.7.i686.rpm 54905f21359536ce157f40c90ae19a6047c540ff92ebd288f4c049cedebb6141 glibc-headers-2.12-1.80.el6_3.7.i686.rpm 8e53d3ed738b204fa5822c060bac34f644b7bf62b6c4be3c1a8d14cc5fc0811e glibc-static-2.12-1.80.el6_3.7.i686.rpm 5e30fc354488218e2f070e59746d51c0378c3acf0e1119f96a51ad58b6be91bb glibc-utils-2.12-1.80.el6_3.7.i686.rpm 0afe9316d959ea93dc07a3ed198d3bafa0d7cc5db1a67aaaccfdbc0eff4c40fa nscd-2.12-1.80.el6_3.7.i686.rpm x86_64: 62527f00a955f3ad30cc1ab3e9b6871ed71d4c607729040194873943d89d8f9f glibc-2.12-1.80.el6_3.7.i686.rpm 9a8a7860b78167cc64c68938798d84f2bee4dccda3f873057283940c70cbdbf6 glibc-2.12-1.80.el6_3.7.x86_64.rpm 26f0f86bf4431e824682b5cc1faeadfbe64d1a22ded8b223d88db476fbaae969 glibc-common-2.12-1.80.el6_3.7.x86_64.rpm dbe7d58085786f153c1b53e474fc0af9f0599b669e0063e508f1bf2b74346d7e glibc-devel-2.12-1.80.el6_3.7.i686.rpm a535fa893137cd181cf175cdc401ec8ccd7384049c0a56f8994a3960018fac9b glibc-devel-2.12-1.80.el6_3.7.x86_64.rpm acc35b400b081d4f8343fbeeb8035dee0ea6207b05f02595665077efcd7acf7b glibc-headers-2.12-1.80.el6_3.7.x86_64.rpm 8e53d3ed738b204fa5822c060bac34f644b7bf62b6c4be3c1a8d14cc5fc0811e glibc-static-2.12-1.80.el6_3.7.i686.rpm 629b1f1ef98af638a8c9e21306d9312d8946c9cefb218ce33fb84b18c72e15ce glibc-static-2.12-1.80.el6_3.7.x86_64.rpm 91db2b7efb9f26369a08714000433372c166f43573c816ebe2de6955d7fa78c6 glibc-utils-2.12-1.80.el6_3.7.x86_64.rpm f1270081274f120128d09b5aaa71ee216915e0f2317406f8068c24cfea741c61 nscd-2.12-1.80.el6_3.7.x86_64.rpm Source: 39a5f804f1151adc1caea48311ffdeb5bef1c1e6867c46c13dc126f3a35102f2 glibc-2.12-1.80.el6_3.7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 1 Feb 2013 00:52:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0213 Important CentOS 6 nspr Update To: centos-announce(a)centos.org Message-ID: <20130201005244.GA8758(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0213 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0213.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e88151e6973a30f30a75bf2029b65c3e0139c791843de3b183c8be6e2d9eea6f nspr-4.9.2-0.el6_3.1.i686.rpm 3fbb608da6c2fdb764cc16cac51aaa3857d37321ccd36f148bc235ee05584db3 nspr-devel-4.9.2-0.el6_3.1.i686.rpm f155dca20b3fb6d0a2a19348c2b4369277535ffb1f49ee763dc835008fc62087 nss-3.13.6-2.el6_3.i686.rpm 90571821bf868f05d9da65af03d3dfcdc6b06ed1e907cca2ee98222eb8f95c29 nss-devel-3.13.6-2.el6_3.i686.rpm 2ddfe0ec2123fa09f4001d58530c9262164a64a680f429b2085f3e6970f30365 nss-pkcs11-devel-3.13.6-2.el6_3.i686.rpm 7525c1e454fc530b3bb9eadcc0be55e721ceeea6380f3e008558235f8c9df29c nss-sysinit-3.13.6-2.el6_3.i686.rpm cfda2ca0e99b69a1aa94c49f38303fd9fcb8bfca029c2a12f83484ea642981e2 nss-tools-3.13.6-2.el6_3.i686.rpm c4dff154761dedcc6b126e366ff53cdf5589ee32796f9aa50463fc3236029202 nss-util-3.13.6-1.el6_3.i686.rpm 44e6810fa11556541f2adf5bb38eb7efb0ed441a8cafc4b8c80d5d998a0a4cba nss-util-devel-3.13.6-1.el6_3.i686.rpm x86_64: e88151e6973a30f30a75bf2029b65c3e0139c791843de3b183c8be6e2d9eea6f nspr-4.9.2-0.el6_3.1.i686.rpm a614f8c673f06c16fdc5b3cb48261656a657d7a0f914734e52aa2f8fa4ac0fb1 nspr-4.9.2-0.el6_3.1.x86_64.rpm 3fbb608da6c2fdb764cc16cac51aaa3857d37321ccd36f148bc235ee05584db3 nspr-devel-4.9.2-0.el6_3.1.i686.rpm 5831cb338c698b6a4ea80222ded557a6e3d9efb846444cc92aba2c39e89845e6 nspr-devel-4.9.2-0.el6_3.1.x86_64.rpm f155dca20b3fb6d0a2a19348c2b4369277535ffb1f49ee763dc835008fc62087 nss-3.13.6-2.el6_3.i686.rpm 4d2622b1f82d169fc0c1337b102f8487065c057824de9aae8f25e44599be175b nss-3.13.6-2.el6_3.x86_64.rpm 90571821bf868f05d9da65af03d3dfcdc6b06ed1e907cca2ee98222eb8f95c29 nss-devel-3.13.6-2.el6_3.i686.rpm 2ffe95978f3b359a0bfc4f059849b91fe76954d901b220750a453c83a9fdd3fa nss-devel-3.13.6-2.el6_3.x86_64.rpm 2ddfe0ec2123fa09f4001d58530c9262164a64a680f429b2085f3e6970f30365 nss-pkcs11-devel-3.13.6-2.el6_3.i686.rpm 5a7cba73bcbad6b007762290b76ee204461f9fb1b054b61eea80bfb08ba2925c nss-pkcs11-devel-3.13.6-2.el6_3.x86_64.rpm d56d789a102e508871d8b2e3ca2a7633e91ee56ff009ea70a6b8a3a02f07b02b nss-sysinit-3.13.6-2.el6_3.x86_64.rpm 1a5324f7ee58cd148283e95b7c19871c4d71f0937cbf335f1886c08f6897b437 nss-tools-3.13.6-2.el6_3.x86_64.rpm c4dff154761dedcc6b126e366ff53cdf5589ee32796f9aa50463fc3236029202 nss-util-3.13.6-1.el6_3.i686.rpm b82db6998fb39f0ecec6b71cac9bd3cb17c078e9a34d9a554df5e59f8a2a4b9c nss-util-3.13.6-1.el6_3.x86_64.rpm 44e6810fa11556541f2adf5bb38eb7efb0ed441a8cafc4b8c80d5d998a0a4cba nss-util-devel-3.13.6-1.el6_3.i686.rpm 2eff8615b9eaf3596c9d32b37aeec43644440146c7d53bf89de076b2ae976a9b nss-util-devel-3.13.6-1.el6_3.x86_64.rpm Source: 3b1b77e7523245462a4b5b5df12cc78c71b82b89d5a599d77501002976015009 nspr-4.9.2-0.el6_3.1.src.rpm fc4c2852dfe1d18583da0dd782d2e5558ee4a3b6ee153883fc25a19b9f129d3c nss-3.13.6-2.el6_3.src.rpm 312f8b48f3ee4eefeab39171b3f1dd24aa032475be7e12a5a34e9f2054e947c5 nss-util-3.13.6-1.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Fri, 1 Feb 2013 00:53:30 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0217 Important CentOS 6 mingw32-libxml2 Update To: centos-announce(a)centos.org Message-ID: <20130201005330.GA8837(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0217 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0217.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0dcd47145306e07bea0a967496ac90f8f9be80d39862cff2b61e2f0c3f1891e9 mingw32-libxml2-2.7.6-6.el6_3.noarch.rpm 05e742cf17dd15ab34a1409546da921a6dae53c07c49451a871449bc63611dbe mingw32-libxml2-static-2.7.6-6.el6_3.noarch.rpm Source: 98ee2989d0e498ab1bf88ff21d7bb91572c15dc1276907869825106bbf924c5e mingw32-libxml2-2.7.6-6.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Fri, 1 Feb 2013 00:53:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0218 Moderate CentOS 6 xorg-x11-drv-qxl Update To: centos-announce(a)centos.org Message-ID: <20130201005346.GA8914(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0218 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0218.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 193d4ec422cd207bc9d204007f6434217bf266dd1fbe25c6caf8d04d5f4a3b59 xorg-x11-drv-qxl-0.0.14-14.el6_3.i686.rpm x86_64: 06baa84f3f8c2f5b61463c7bb7163c44ab77e861e1e56886b92e944daa2438e5 xorg-x11-drv-qxl-0.0.14-14.el6_3.x86_64.rpm Source: 4c29fb70823da60b70220eec34fd59c5b6aa17d41c09d0ab11550531b42083c5 xorg-x11-drv-qxl-0.0.14-14.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Fri, 1 Feb 2013 00:54:03 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0219 Moderate CentOS 6 mysql Update To: centos-announce(a)centos.org Message-ID: <20130201005403.GA9052(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0219 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0219.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ecee86964db7e38b57e9737b3b1a0381dde9e585ee050d5e8788099e01651c2d mysql-5.1.67-1.el6_3.i686.rpm a9129bc6a47c40e0c31256907d66d5ac2b4a2fc549c3b7cec85919b18f19e832 mysql-bench-5.1.67-1.el6_3.i686.rpm 3fe72dd0a06433c7e478a0593439182c75ff665df65e09200f6a8c18540d1cb1 mysql-devel-5.1.67-1.el6_3.i686.rpm c3373b826a295eaf71b67f2b421579f1d708aefa3e11c5392a877a224699aaa1 mysql-embedded-5.1.67-1.el6_3.i686.rpm 4f682bd801716ed1c799e174bcc2acf8c1f4a71b2cd81e9e0c29a11b58bd491b mysql-embedded-devel-5.1.67-1.el6_3.i686.rpm db444bb71cacb7625a8623c3f6be19413f02cefdc99058c9cc49e45170dd6352 mysql-libs-5.1.67-1.el6_3.i686.rpm e3331fcf2a56272c383696ca441c7b3f6d2c82a498589c6f1545efc2243ff635 mysql-server-5.1.67-1.el6_3.i686.rpm 2dea1b319433a31261dae849fe5ed5d36dffcb8a9d155b41caa2975bdd6f8626 mysql-test-5.1.67-1.el6_3.i686.rpm x86_64: 3d2d40fdcd196b017bcd64a036fd2607585d634508ebb7e5537fefa8c4467372 mysql-5.1.67-1.el6_3.x86_64.rpm 61add48ec87de135e263d78c71ffd1999004ac520ff3181f0bce197514368d1f mysql-bench-5.1.67-1.el6_3.x86_64.rpm 3fe72dd0a06433c7e478a0593439182c75ff665df65e09200f6a8c18540d1cb1 mysql-devel-5.1.67-1.el6_3.i686.rpm b73d89fab99dcfcff51feed632c8a38c0160f7a6965a3e3f755033adaa5c512d mysql-devel-5.1.67-1.el6_3.x86_64.rpm c3373b826a295eaf71b67f2b421579f1d708aefa3e11c5392a877a224699aaa1 mysql-embedded-5.1.67-1.el6_3.i686.rpm e686777282cf33d81b5ebf95563a72211d3d5e70e80ae4f00cf2801b4ced5eb9 mysql-embedded-5.1.67-1.el6_3.x86_64.rpm 4f682bd801716ed1c799e174bcc2acf8c1f4a71b2cd81e9e0c29a11b58bd491b mysql-embedded-devel-5.1.67-1.el6_3.i686.rpm 5b07993efcfdf84c983f9108b863d9c806f43aef8361ecce6582d633bc1136d6 mysql-embedded-devel-5.1.67-1.el6_3.x86_64.rpm db444bb71cacb7625a8623c3f6be19413f02cefdc99058c9cc49e45170dd6352 mysql-libs-5.1.67-1.el6_3.i686.rpm f439dcd0020893e7f9fbf76e9bddc48217e943f2379243bfb3b9395ba785cae9 mysql-libs-5.1.67-1.el6_3.x86_64.rpm 5a25bca9c9543da74bb3157a9f533dbb2f3dfc859831dd992a9f2588e7fc1453 mysql-server-5.1.67-1.el6_3.x86_64.rpm b050e02e4e518911273cfec40301331c3cb36b05d6053abc73dc709fd2c70d2a mysql-test-5.1.67-1.el6_3.x86_64.rpm Source: 5aa2cc8321571088c2dc1b1741aabbe0c4a302e4c32297f9cebfd519bc1a04c8 mysql-5.1.67-1.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Fri, 1 Feb 2013 00:54:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0216 Important CentOS 6 freetype Update To: centos-announce(a)centos.org Message-ID: <20130201005419.GA9147(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0216 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0216.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b37dfc93cc75837d5b0d8fd431074098f99b79c4e691dcfd00ee5b1664d56864 freetype-2.3.11-14.el6_3.1.i686.rpm 5e91057b351b08a32245ee371dd60f501d9e839680bc354159eb4edb8d025b14 freetype-demos-2.3.11-14.el6_3.1.i686.rpm e563423bb14e3e301a289e12fc6eb39b3cdfdf9c34c88c7c2c38a4a0e2020443 freetype-devel-2.3.11-14.el6_3.1.i686.rpm x86_64: b37dfc93cc75837d5b0d8fd431074098f99b79c4e691dcfd00ee5b1664d56864 freetype-2.3.11-14.el6_3.1.i686.rpm 0ba55b5fd3f1be53709c67884f8c75bd16916277a9f40327648de0619ad25b14 freetype-2.3.11-14.el6_3.1.x86_64.rpm a23e9344e17c4ce811d14a62784f5b1802d2d2bd70a030e43b9a3bfb4b4ae86b freetype-demos-2.3.11-14.el6_3.1.x86_64.rpm e563423bb14e3e301a289e12fc6eb39b3cdfdf9c34c88c7c2c38a4a0e2020443 freetype-devel-2.3.11-14.el6_3.1.i686.rpm 2e1a2befb77a2a96e7f3beea35ffd515a12568206e77e6a5f7e3f0864b9a4cc2 freetype-devel-2.3.11-14.el6_3.1.x86_64.rpm Source: 25a5e38ef7e61078513bad46af09c8963586cd56d3411ad8d0e8558e1d515ae7 freetype-2.3.11-14.el6_3.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Fri, 1 Feb 2013 00:54:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0215 Important CentOS 6 libreport Update To: centos-announce(a)centos.org Message-ID: <20130201005446.GA9343(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0215 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0215.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8e0d59501d93b4a67d44055bf5b5e5c78b85e3629075ec416fdf3bfa3d42c89c libreport-2.0.9-5.el6.centos.2.i686.rpm 3e9dbbd95daed780c12153d6f38309600bd66590d63e56e817120ed95b225e35 libreport-cli-2.0.9-5.el6.centos.2.i686.rpm ccd9f41d805ade92881a7ca7b4462b44d093a2604087b4a918343610806b4701 libreport-devel-2.0.9-5.el6.centos.2.i686.rpm 0c5324c7eacd6b372d4f4bf7406cf718072b6e13510a8955e066ea7c8b0f0284 libreport-gtk-2.0.9-5.el6.centos.2.i686.rpm ef8672cecca76da21532c2ade4e129c88d0f90b639155b731ee9f617ba1d51a9 libreport-gtk-devel-2.0.9-5.el6.centos.2.i686.rpm 290f73d5a3154d15ef2ffd247c9918a31d947fbb2b4e31fca3680e8fe308341a libreport-newt-2.0.9-5.el6.centos.2.i686.rpm d7763b62d243700c8ce1b4a655841d79fe6934b17b358d4fe70a29eacdc211ce libreport-plugin-bugzilla-2.0.9-5.el6.centos.2.i686.rpm e68b8babf6c6226c4585a22c954c3b119c86b36f293d6af200e3732c16097e0a libreport-plugin-kerneloops-2.0.9-5.el6.centos.2.i686.rpm 8eb620319a6daa288633faa7eb8e3c3a75b3292d8511e9b4a99ded129bf55faa libreport-plugin-logger-2.0.9-5.el6.centos.2.i686.rpm 79e1f535effba553cecb6267a8ee14122ed20ad18c6673353cdefad3f1893956 libreport-plugin-mailx-2.0.9-5.el6.centos.2.i686.rpm 000cd2129036a237c2072dd24c039f1e15754294dffe1bc0de20b6c54204a5e5 libreport-plugin-reportuploader-2.0.9-5.el6.centos.2.i686.rpm a82f1231c012eba482894766833cbd4ea85936763500242c7e95e717f7da51b8 libreport-plugin-rhtsupport-2.0.9-5.el6.centos.2.i686.rpm a6b1b87db38dce9e27b518f355b75cafdb2b529f994a3b574cd44b26997095b0 libreport-python-2.0.9-5.el6.centos.2.i686.rpm x86_64: 8e0d59501d93b4a67d44055bf5b5e5c78b85e3629075ec416fdf3bfa3d42c89c libreport-2.0.9-5.el6.centos.2.i686.rpm c4ac1b3b34f494df353b7bb5c883c4c865b51e68baf7ed9c8f959e6eab176e4d libreport-2.0.9-5.el6.centos.2.x86_64.rpm 60b1b38bf661d042b20945dbfd3dce6ec2512f59f880458a15d13b2d80457f50 libreport-cli-2.0.9-5.el6.centos.2.x86_64.rpm ccd9f41d805ade92881a7ca7b4462b44d093a2604087b4a918343610806b4701 libreport-devel-2.0.9-5.el6.centos.2.i686.rpm 336b1a107ce81f81956d22922a22184553c881219efea82930075f3ba22cc723 libreport-devel-2.0.9-5.el6.centos.2.x86_64.rpm 0c5324c7eacd6b372d4f4bf7406cf718072b6e13510a8955e066ea7c8b0f0284 libreport-gtk-2.0.9-5.el6.centos.2.i686.rpm 280d662cca789d9b256328bfd414616db60de108cb6b5027cc58fc0b585f9cdb libreport-gtk-2.0.9-5.el6.centos.2.x86_64.rpm ef8672cecca76da21532c2ade4e129c88d0f90b639155b731ee9f617ba1d51a9 libreport-gtk-devel-2.0.9-5.el6.centos.2.i686.rpm 4f9dbf54d24f861eb5ccf33d67b66090295d0a6508d2cd2e7978fddbcc98b43a libreport-gtk-devel-2.0.9-5.el6.centos.2.x86_64.rpm 47cc4986e8ca9ca9106f8dccd991c4eb87ffd112638fc1e240c608f31447af8b libreport-newt-2.0.9-5.el6.centos.2.x86_64.rpm 97ac69bea50729a77e65e63914fd0ef861f4b4aebc3b9b993fb7c71052a4baa6 libreport-plugin-bugzilla-2.0.9-5.el6.centos.2.x86_64.rpm d6f027c7130eb9cd45dcc3348bf4c1c8b505ed6e32f7e6672a0b3039a61f853f libreport-plugin-kerneloops-2.0.9-5.el6.centos.2.x86_64.rpm 670d92620fc26e55fb3e1d605efc03d421cac7716c34f5818d1c43b6bf5526ca libreport-plugin-logger-2.0.9-5.el6.centos.2.x86_64.rpm baf8ce51c95a93f9df32bdf2ec51a2611d435d7896ff43f4c259b7c1dbc099ac libreport-plugin-mailx-2.0.9-5.el6.centos.2.x86_64.rpm f36a8dc70d72dafd24d506fbe10e1cec26a4315eebc329d18082bd380568b181 libreport-plugin-reportuploader-2.0.9-5.el6.centos.2.x86_64.rpm c463c72546dceb37294beb2f6a635ed86502299ca525c9be87e6c8c674919110 libreport-plugin-rhtsupport-2.0.9-5.el6.centos.2.x86_64.rpm 6e5b9064107c26c51486b487ec3d3abe9d00103403509e281aa85f6fb5f7ef72 libreport-python-2.0.9-5.el6.centos.2.x86_64.rpm Source: b5db120674caa9a2f386cba313cbc83c10a919bedd9c6c36fb7b092804628ca4 libreport-2.0.9-5.el6.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Fri, 1 Feb 2013 00:55:08 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0215 Important CentOS 6 abrt Update To: centos-announce(a)centos.org Message-ID: <20130201005508.GA9518(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0215 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0215.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 99851e81e7cac7d406e9931753af92833ecc58fdcf5e328e715334382e169337 abrt-2.0.8-6.el6.centos.2.i686.rpm 3ed3c46d03e4dae6be6082b157b952570289c2ee828c10032cfb020ffd0fdd7b abrt-addon-ccpp-2.0.8-6.el6.centos.2.i686.rpm b7f061fd7ddf9f4daecaf3e17faff2b264de48818ee40282eaf1f75f0f2d9731 abrt-addon-kerneloops-2.0.8-6.el6.centos.2.i686.rpm 0f4f4ca291c1d695d454d09840d6f752b7d087699bbf5ba3c0a20a9be7792684 abrt-addon-python-2.0.8-6.el6.centos.2.i686.rpm 53402d4a46ef3260b85f73f9cbb63afd01ca059027637b4e24f2ec17741f51c3 abrt-addon-vmcore-2.0.8-6.el6.centos.2.i686.rpm 5c32b3ebb2645397588edd8c46c229bce1bbaa5a0e54371d9ab5e66cb7ccfc25 abrt-cli-2.0.8-6.el6.centos.2.i686.rpm fe16d485cf09570eea5a2c46a023df9c2ba2d648a98d380921fce8d55591a767 abrt-desktop-2.0.8-6.el6.centos.2.i686.rpm e71d5bf2b6ae169c010e7e61a760ece4fb6312996ac485839e0bbb09a4af70f1 abrt-devel-2.0.8-6.el6.centos.2.i686.rpm 827b7562d78d98c1b4ad2e1d31eb942462f0c9b1c633c8ed7d9f6fc475508592 abrt-gui-2.0.8-6.el6.centos.2.i686.rpm 1e2b8414f68959761103b8d261a6b00ae6fc2f39046930742d3366fabb46b0eb abrt-libs-2.0.8-6.el6.centos.2.i686.rpm bda68ae0afe2e0717d158e401484878089bbe8a9f6d3c789f050fc4e4976f030 abrt-tui-2.0.8-6.el6.centos.2.i686.rpm x86_64: 592efb202a65ab128c5f45bca3b011d81962fba3472e04858fb77d9bad180ee3 abrt-2.0.8-6.el6.centos.2.x86_64.rpm 12a2541afc5d7cf74e4406d51322aa653ad8bd25af5ecd25d1ad0714c15abdc4 abrt-addon-ccpp-2.0.8-6.el6.centos.2.x86_64.rpm aaefcc6c7e12a8250dcc8c984252699b58f0bd49fd7ad5271e38e0346fb43819 abrt-addon-kerneloops-2.0.8-6.el6.centos.2.x86_64.rpm 90e0dc7bba6bf24197b10c2970a08e32400c9397893665b656d37234e911318e abrt-addon-python-2.0.8-6.el6.centos.2.x86_64.rpm eba577a25da22d53b21ef8108e5d48e816a0fc75ddbcdf136ee4e39ebbfd4045 abrt-addon-vmcore-2.0.8-6.el6.centos.2.x86_64.rpm d154cbb65c54c7aed29cf8c8a540d774bd245b154c887e675ca2951aef205010 abrt-cli-2.0.8-6.el6.centos.2.x86_64.rpm 87516d7e2257026b9f32ca01a655a8ea872858923479cbc01a5fcccd48d2ab93 abrt-desktop-2.0.8-6.el6.centos.2.x86_64.rpm e71d5bf2b6ae169c010e7e61a760ece4fb6312996ac485839e0bbb09a4af70f1 abrt-devel-2.0.8-6.el6.centos.2.i686.rpm 74a195b40bc73bfbbc474b2f78c5152532c71bfb25f6c17f438f77b23af51ae5 abrt-devel-2.0.8-6.el6.centos.2.x86_64.rpm 6fe933d1bea1b75d167e6df5e8142e8796d8b5b26db1c52d3f46ad36af9f6d88 abrt-gui-2.0.8-6.el6.centos.2.x86_64.rpm 1e2b8414f68959761103b8d261a6b00ae6fc2f39046930742d3366fabb46b0eb abrt-libs-2.0.8-6.el6.centos.2.i686.rpm 096cd160d307b745c68d13884b01edc44b3de55c8bd490ffaae57ee74e2c6f16 abrt-libs-2.0.8-6.el6.centos.2.x86_64.rpm bff039a681695683a865d243aadf17dbdfd81bd8f2e56f06fdf2f5a45b09ede6 abrt-tui-2.0.8-6.el6.centos.2.x86_64.rpm Source: 18ce3f397397cedfddad1a353e040cdab6c03a1c3c29feae812667d25c39a23a abrt-2.0.8-6.el6.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 96, Issue 1 **********************************************

1 0

Centos as l2tp/ipsec-Client
by sebastian 01 Feb '13

01 Feb '13

Hello, i need to configure a centos 6.3 - server as an l2tp/ipsec-client. I have no idea how I there previous or if this is even possible. Where one might find appropriate instructions? Google is not very helpful, without any idea. Thanks cami

3 4

ACL/permissions question
by Boris Epstein 01 Feb '13

01 Feb '13

Hello listmates, If I have a regular, ACL-capable filesystem on Linux (say, ext4 or xfs) is there a way for me to establish the following: 1) There is a directory, say, /home/joe . It is owned by user joe . No one but joe (and root, of course) can read or write anything in this directory. 2) No one can change permissions on that directory, not even joe. In other words, in joe all of a sudden joe decided to open his directory up to the world (or the group he is a member of) by doing something akin to: chmod 777 /home/joe he would not succeed. Thanks in advance for any help. Boris.

2 1

Re: [CentOS] How to extract one file from rpm using yum?
by Robert Moskowitz 31 Jan '13

31 Jan '13

On 01/31/2013 11:40 AM, Reindl Harald wrote: > > Am 31.01.2013 16:55, schrieb Robert Moskowitz: >> I want to get the original version of /etc/clamd.d/amavis.conf from the >> amavisd-new rpm to get the defaults to submit a bug report. I could not >> figure out how to do this, so I did a reinstall, but it did not replace >> this file (whatprovides says it comes from this rpm). >> >> Is there a way to extract just the one file, and better yet, place it >> elsewhere than its regular destination? > seems you are very new in the rpm world Actually very old to it. I use to do this stuff 10 years ago and my brain just ain't what it use to be. Use to do my own builds for a number of apps, but doubt I could do a build now! > > THANKFULLY a reinstall does not touch modified config-files > BUT you get a warning from yum that whatever.conf was installed > as watever.conf.rpmnew >

1 0

More on amavis/clam permission errors on Centos 6.3
by Robert Moskowitz 31 Jan '13

31 Jan '13

I should probably find either the amavis or clam list(s) and take this there? Anyway, I have totally rebuilt my machine with clean installs. I have spent time carefully (I hope!) studying the amavis and clamav conf files before starting them and running the tests. Here is what I am getting: Jan 30 14:14:10 test1 postfix/pickup[6682]: DA8082A099B: uid=0 from=<root> Jan 30 14:14:10 test1 postfix/cleanup[6773]: DA8082A099B: message-id=<20130130191410.DA8082A099B(a)test1.test.htt-consult.com> Jan 30 14:14:10 test1 postfix/qmgr[6683]: DA8082A099B: from=<root(a)test1.test.htt-consult.com>, size=446, nrcpt=1 (queue active) Jan 30 14:14:11 test1 amavis[6756]: (06756-01) LMTP::10024 /var/spool/amavisd/tmp/amavis-20130130T141411-06756: <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com> SIZE=446 Received: from test1.test.htt-consult.com ([127.0.0.1]) by localhost (test1.test.htt-consult.com [127.0.0.1]) (amavisd-new, port 10024) with LMTP for <faxit(a)test.htt-consult.com>; Wed, 30 Jan 2013 14:14:11 -0500 (EST) Jan 30 14:14:11 test1 amavis[6756]: (06756-01) Checking: 95-+1-aqz4Cb <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com> Jan 30 14:14:11 test1 amavis[6756]: (06756-01) (!)run_av (ClamAV-clamd) FAILED - unexpected , output="/var/spool/amavisd/tmp/amavis-20130130T141411-06756/parts: lstat() failed: Permission denied. ERROR\n" Jan 30 14:14:11 test1 amavis[6756]: (06756-01) (!)ClamAV-clamd av-scanner FAILED: CODE(0x9fff7b8) unexpected , output="/var/spool/amavisd/tmp/amavis-20130130T141411-06756/parts: lstat() failed: Permission denied. ERROR\n" at (eval 100) line 594. Jan 30 14:14:11 test1 amavis[6756]: (06756-01) (!!)WARN: all primary virus scanners failed, considering backups Jan 30 14:14:21 test1 amavis[6756]: (06756-01) Blocked INFECTED (Eicar-Test-Signature), <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com>, Message-ID: <20130130191410.DA8082A099B(a)test1.test.htt-consult.com>, mail_id: 95-+1-aqz4Cb, Hits: -, size: 446, 10352 ms Jan 30 14:14:21 test1 postfix/lmtp[6777]: DA8082A099B: to=<faxit(a)test.htt-consult.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=11, delays=0.19/0.01/0.01/10, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=06756-01 - INFECTED: Eicar-Test-Signature) Jan 30 14:14:21 test1 postfix/qmgr[6683]: DA8082A099B: removed Jan 30 14:18:37 test1 postfix/pickup[6682]: 6E6342A099C: uid=0 from=<root> Jan 30 14:18:37 test1 postfix/cleanup[6807]: 6E6342A099C: message-id=<GTUBE1.1010101(a)example.net> Jan 30 14:18:37 test1 postfix/qmgr[6683]: 6E6342A099C: from=<root(a)test1.test.htt-consult.com>, size=947, nrcpt=1 (queue active) Jan 30 14:18:37 test1 amavis[6755]: (06755-01) LMTP::10024 /var/spool/amavisd/tmp/amavis-20130130T141837-06755: <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com> SIZE=947 Received: from test1.test.htt-consult.com ([127.0.0.1]) by localhost (test1.test.htt-consult.com [127.0.0.1]) (amavisd-new, port 10024) with LMTP for <faxit(a)test.htt-consult.com>; Wed, 30 Jan 2013 14:18:37 -0500 (EST) Jan 30 14:18:37 test1 amavis[6755]: (06755-01) Checking: iVLEI2wVyvfc <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com> Jan 30 14:18:37 test1 amavis[6755]: (06755-01) (!)run_av (ClamAV-clamd) FAILED - unexpected , output="/var/spool/amavisd/tmp/amavis-20130130T141837-06755/parts: lstat() failed: Permission denied. ERROR\n" Jan 30 14:18:37 test1 amavis[6755]: (06755-01) (!)ClamAV-clamd av-scanner FAILED: CODE(0x9fff7b8) unexpected , output="/var/spool/amavisd/tmp/amavis-20130130T141837-06755/parts: lstat() failed: Permission denied. ERROR\n" at (eval 100) line 594. Jan 30 14:18:37 test1 amavis[6755]: (06755-01) (!!)WARN: all primary virus scanners failed, considering backups Jan 30 14:19:01 test1 amavis[6755]: (06755-01) Blocked SPAM, <root(a)test1.test.htt-consult.com> -> <faxit(a)test.htt-consult.com>, Message-ID: <GTUBE1.1010101(a)example.net>, mail_id: iVLEI2wVyvfc, Hits: 1005.069, size: 947, 23998 ms Jan 30 14:19:01 test1 postfix/lmtp[6811]: 6E6342A099C: to=<faxit(a)test.htt-consult.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=24, delays=0.13/0.01/0.01/24, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=06755-01 - SPAM) Jan 30 14:19:01 test1 postfix/qmgr[6683]: 6E6342A099C: removed I should also see what I might change so that instead of blocking and dropping, it will tag and let through so I can see it for now at least. Oh, I have not applied the updated policy rpms that Dan Walsh pointed me to. This is all 'out of the box' rpms, following the amavis/clamav recommendations from: http://wiki.centos.org/HowTos/Amavisd

4 8

Anything Like Solaris' Live Upgrade?
by Tim Evans 31 Jan '13

31 Jan '13

Does anyone know of any sort of Linux utility that does something like what Solaris' Live Upgrade (http://docs.oracle.com/cd/E19455-01/806-7933/index.html) does? In my past life as a Solaris sys-admin, I found this an extremely useful tool for upgrading and patching running systems, as well as for maintaining redundant boot environments on separate system disks for disaster situations. -- Tim Evans | 5 Chestnut Court Linux/UNIX Consulting | Owings Mills, MD 21117 http://www.tkevans.com/ | 443-394-3864 http://www.come-here.com/News/ | tkevans(a)tkevans.com

8 12

Re: [CentOS] 2way authentication for SSH?
by J.Witvliet＠mindef.nl 31 Jan '13

31 Jan '13

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Rudi Ahlers Sent: Monday, January 28, 2013 8:52 AM To: CentOS Subject: [CentOS] 2way authentication for SSH? Hi, Does anyone know of a stable / working "2way authentication" system for SSH, and even web authentication services? Most of the banks in South Africa have a system that, when you want to make a payment, they send you an SMS and you need to verify the action with a secret code which was SMS'd to you. gmail also has this. Does anyone know of a "universal" plugin / application that can be used with SSH and even websites like Wordpress / Joolma / Webmin / etc? Any pointer would be appreciated. -----Original Message----- Is it really 2way (as in mutual) authentication or 2factor authentication? Mutual authentication is normally done with ssl (server + client) certificates. Most http engines (apache, tomcat) do support them. For two factor (have, know) authentication "some assembly" is required, at least for openssh. See: http://roumenpetrov.info/openssh/ Generally speaking, you _do_ want a trusted third party (like a CA) and certainly _not_ another additional unreliable man-in-the-middle. I mean: like google. But should I trust them with regards to security and availability??? HW ______________________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

1 0

Installing RHEL On Laptop.....
by Eddie G. O'Connor Jr. 31 Jan '13

31 Jan '13

Not sure if this is the right place to come to, but I don't have "RHN" support.....I'm hoping someone can help me out here. I have downloaded the RHEL .ios file and burned it to DVD/CD, my laptop is primed to Boot From CD/ROM Drive, I start the installation using the semi-graphical interface, and the first few options are a breeze, then it gets to identifying the CD drive and it asks me which driver I want to use....there's only a list of about 10 and NONE of them work, when I select it, it searches for a minute, then it goes back to the "Install Your CD Drive" screen. Is there some way to skip this part? or to have the install disc automatically find this info? Did I download the wrong version of RHEL? (supposedly it's free...but I do not know this for sure....maybe there's a "different" version than the one with the paid subscription and support?) Any help someone can give would be appreciated....I've included the output of my lshw in the hopes that someone can point me to the file that I need to get past this point? Cheers! EGO II ********************************************************************************************************************************** orion-2015 description: Notebook product: 4236MBU () vendor: LENOVO version: ThinkPad T420 serial: PBBVXMP width: 32 bits capabilities: smbios-2.6 dmi-2.6 configuration: administrator_password=disabled chassis=notebook family=ThinkPad T420 power-on_password=disabled uuid=01202A76-8A51-CB11-94E8-924CC9AF70CB *-core description: Motherboard product: 4236MBU vendor: LENOVO physical id: 0 version: Not Available serial: 1ZLEH26J1TW slot: Not Available *-cpu description: CPU product: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz vendor: Intel Corp. physical id: 1 bus info: cpu@0 version: 6.10.7 serial: 0002-06A7-0000-0000-0000-0000 slot: CPU size: 2601MHz capacity: 2601MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 id=0 threads=4 *-cache:0 description: L1 cache physical id: 2 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-through data *-cache:1 description: L2 cache physical id: 3 slot: L2-Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through data *-cache:2 description: L3 cache physical id: 4 slot: L3-Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-back unified *-logicalcpu:0 description: Logical CPU physical id: 0.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 0.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 0.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 0.4 width: 64 bits capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 0.5 width: 64 bits capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 0.6 width: 64 bits capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 0.7 width: 64 bits capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 0.8 width: 64 bits capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 0.9 width: 64 bits capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 0.a width: 64 bits capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 0.b width: 64 bits capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 0.c width: 64 bits capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 0.d width: 64 bits capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 0.e width: 64 bits capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 0.f width: 64 bits capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 0.10 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 5 slot: System board or motherboard size: 6GiB *-bank:0 description: SODIMM DDR3 Synchronous 1067 MHz (0.9 ns) product: HMT351S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 0 serial: 19606B99 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1067MHz (0.9ns) *-bank:1 description: SODIMM DDR3 Synchronous 1067 MHz (0.9 ns) product: AXIOM MEMORY vendor: 0000 physical id: 1 serial: 00000000 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1067MHz (0.9ns) *-firmware description: BIOS vendor: LENOVO physical id: 10 version: 83ET67WW (1.37 ) date: 11/28/2011 size: 128KiB capacity: 8128KiB capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb biosbootspecification *-pci description: Host bridge product: Sandy Bridge DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-display description: VGA compatible controller product: Intel Corporation vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64) *-communication:0 description: Communication controller product: Cougar Point HECI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:43 memory:f2525000-f252500f *-communication:1 description: Serial controller product: Cougar Point KT Controller vendor: Intel Corporation physical id: 16.3 bus info: pci@0000:00:16.3 version: 04 width: 32 bits clock: 66MHz capabilities: pm msi 16550 bus_master cap_list configuration: driver=serial latency=0 resources: irq:19 ioport:50b0(size=8) memory:f252c000-f252cfff *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: 00:21:cc:c7:7f:fd capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k firmware=0.13-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:42 memory:f2500000-f251ffff memory:f252b000-f252bfff ioport:5080(size=32) *-usb:0 description: USB Controller product: Cougar Point USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:f252a000-f252a3ff *-multimedia description: Audio device product: Cougar Point High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:45 memory:f2520000-f2523fff *-pci:0 description: PCI bridge product: Cougar Point PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 *-pci:1 description: PCI bridge product: Cougar Point PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:f2400000-f24fffff *-network description: Wireless interface product: 6000 Series Gen2 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 34 serial: 8c:70:5a:bb:40:30 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.6.11-1.fu2013.i686.PAE firmware=18.168.6.1 ip=192.168.1.102 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:44 memory:f2400000-f2401fff *-pci:2 description: PCI bridge product: Cougar Point PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 ioport:4000(size=4096) memory:f1c00000-f23fffff ioport:f0400000(size=8388608) *-pci:3 description: PCI bridge product: Cougar Point PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:3000(size=4096) memory:f1400000-f1bfffff ioport:f0c00000(size=8388608) *-generic description: System peripheral product: Ricoh Co Ltd vendor: Ricoh Co Ltd physical id: 0 bus info: pci@0000:0d:00.0 version: 08 width: 32 bits clock: 33MHz capabilities: msi pm pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:16 memory:f1400000-f14000ff *-usb:1 description: USB Controller product: Cougar Point USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:f2529000-f25293ff *-isa description: ISA bridge product: Cougar Point LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-storage description: SATA controller product: Cougar Point 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:40 ioport:50a8(size=8) ioport:50bc(size=4) ioport:50a0(size=8) ioport:50b8(size=4) ioport:5060(size=32) memory:f2528000-f25287ff *-serial description: SMBus product: Cougar Point SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: driver=i801_smbus latency=0 resources: irq:18 memory:f2524000-f25240ff ioport:efa0(size=32) *-scsi:0 physical id: 0 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST320LT007-9ZV14 vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0004 serial: W0Q64H7T size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=4096 signature=000758a7 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /boot version: 1.0 serial: 52f28da4-4564-4bb6-8b66-b2778a76b5c6 size: 500MiB capacity: 500MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized configuration: created=2012-11-09 23:06:43 filesystem=ext4 lastmountpoint=/boot modified=2013-01-29 11:22:20 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2013-01-29 11:19:39 state=mounted *-volume:1 description: Linux LVM Physical Volume partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 serial: pDNcW3-v8IL-95G6-9N2H-Nlle-zELg-yc0bGe size: 297GiB capacity: 297GiB capabilities: primary multi lvm2 *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRAM GT50N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/Red Hat Linux_i386 6.2 version: LT20 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=500,gid=501,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/Red Hat Linux_i386 6.2 configuration: mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,uid=500,gid=501,iocharset=utf8,mode=0400,dmode=0500 state=mounted *-battery product: 45N1005 vendor: LGC physical id: 1 slot: Rear capacity: 56160mWh configuration: voltage=10.8V

2 1

Mail notification in panel/system tray on CentOS 6
by Toralf Lund 31 Jan '13

31 Jan '13

Hi. Does anyone know of a way to add a "new mail" notification icon to the panel/system tray under CentOS 6? On CentOS 5, I used the "mail-notification" software package provided by the Fedora "EPEL" distribution, but this is gone from the version 6 repository, and the one from version 5 won't install just like that due to dependency issues. Maybe it's possible to resolve those, but I'm wondering if that's the way to go, or if there is a better alternative these days. - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 8

"Can't install ... as no transaction" from PackageKit (CentOS 6)
by Toralf Lund 30 Jan '13

30 Jan '13

Hello again, Does anyone have any idea what the following message in the package installer - gpk-install-local-file - is supposed to mean? Can't install /tmp/mail-notification-4.0-3.el5.x86_64.rpm as no transaction (Under "More details" in the "Local install failed" popup.) This is something I got while trying to set up a "mail notification" icon - refer to my other recent post. I happen to know what (part of) the problem is - the package has dependencies that can't be resolved, but why doesn't the message just say so? And what's the meaning of a "transaction" anyway? Mind you, I believe I understand the word perfectly well, but in the above sentence it still makes no sense to me... To reproduce this, you may try (on a CentOS 6) system: 1. In a web browser, go to http://dl.fedoraproject.org/pub/epel/5/x86_64/repoview/mail-notification.ht… or http://dl.fedoraproject.org/pub/epel/5/i386/repoview/mail-notification.html depending on your architecture. 2. Click on the rpm link. 3. Select "Open with"->"Package Installer (default)". 4. Answer "Install" when asked if you want to install the file (after it's downloaded.) 5. Click "More details" when the error popup appears. I suspect, though, that you may actually see a sensible "dependency" message, i.e. that this is sometimes correctly displayed, sometimes not. - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

1 0

Question about /etc/clamd.d/amavisd.conf
by Robert Moskowitz 30 Jan '13

30 Jan '13

I don't know if this file comes from clam or amavis-new, but.... It contains the comment and command: # Run as a selected user (clamd must be started by root) User amavis Is this conf file for clam or amavis? As in /etc/clamd.conf we have: # Run as another user (clamd must be started by root for this option to work) # Default: don't drop privileges User clam # Initialize supplementary group access (clamd must be started by root). # Default: no AllowSupplementaryGroups yes Then in /etc/amavisd.conf (the real? conf file for amavis-new) in the Clamav section are comments: # # Note: run clamd under the same user as amavisd, or run it under its own # # uid such as clamav, add user clamav to the amavis group, and then add # # AllowSupplementaryGroups to clamd.conf; So is clam running under its user or amavis? Why is this last comment pointing to the 'old' clamav userid?

1 0

Alias for sending email messages from root
by James B. Byrne 30 Jan '13

30 Jan '13

I have run into what can only be described as a farce but one that is outside my control and which I need fixed. I am informed that my cell phone service provider, Bell Canada, will not allow any email messages from a user id 'root' to pass through their email to sms text gateway. Now, I send alerts out from cron and other system monitoring software and these all go out as root(a)host.domain.tld. Is there any way to configure the outgoing address to be something else? Or do I have to rename the root user to get around this nonsensical, and utterly useless, restriction imposed by my provider? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 3

centos 6.3 git core.sharedRepository = group/all not working?
by Min Wang 30 Jan '13

30 Jan '13

HI I have a git bare repo on centos 6.3 ( with selinux off) the config is: [core] repositoryformatversion = 0 filemode = true bare = true sharedRepository = all ( or true or group) chmod -R g+rs objects when git pushed the changes from remote ssh . the new file under objects are not writable. e.g.: -r--r--r--. 1 myuser mygroup 156 Jan 29 22:22 objects/fa/905054c795a3b7e5c244bfc6f3a30a0277c6d0 what could be wrong? thanks. min

2 2

yum killed, ipa\* and xorg\* a mess
by Zube 30 Jan '13

30 Jan '13

yum update was killed at an inopportune time, leaving ipa\* and xorg\* in an inconsistent state. yum-complete-transaction looks like it it's going to erase the entire system and then fails. >From the transaction files, the following are in: install 0:ipa-python-2.2.0-17.el6_3.1.x86_64 install 0:ipa-client-2.2.0-17.el6_3.1.x86_64 install 0:xorg-x11-server-common-1.10.6-1.0.1.el6.centos.x86_64 install 0:ipa-admintools-2.2.0-17.el6_3.1.x86_64 rpm -q ipa-server returns: ipa-server-2.2.0-16.el6.x86_64 ipa-server-2.2.0-17.el6_3.1.x86_64 rpm -q ipa-server-selinux returns: ipa-server-selinux-2.2.0-16.el6.x86_64 Thinking I could remove the old and then drop in the new, I tried: rpm -e ipa-server-2.2.0-16.el6.x86_64 ipa-server-selinux-2.2.0-16.el6.x86_64 but that fails with: ipa-server-selinux = 2.2.0-17.el6_3.1 is needed by (installed) ipa-server-2.2.0-17.el6_3.1.x86_64 Normally I'd not be hesitant about trying different options, perhaps with --nodeps, and then reinstalling if my inexperience proved to be fatal, but this machine is not unimportant, so any advice is greatly appreciated. Thanks very much for your time. Cheers, Zube

3 3

pid location from clamav on Centos 6.3
by Robert Moskowitz 30 Jan '13

30 Jan '13

I was getting nowhere with my clamav permissions problem, so I blew away my test system and did a total rebuild. I am now up to the part right after the install of amavis-new, clamav, clamav-devel, and clamd all from the epel.repo (spamassassin, also installed at the same time comes from the base repo). Prior to this, I rebuild the system from my kickstart file, and did the postfix, postfixadmin, mysql, dovecot, and roundcube setups all from instructions and scripts that I have put together over the past number of weeks, and this part went right through with no apparent problems. So now I am carefully checking out clamav before I make any config changes and right away I notice discrepencies with where clamd.pid is located. In /etc/clamd.conf it is placed in /var/run/clamav/clamd.pid In /etc/clamd.d/amavisd.conf it is placed in /var/run/amavisd/clamd.pid /etc/amavisd/amaviisd.conf does not reference the clamd.pid, only the .sock and warns you to point it to the same place as in /etc/clamd.conf. But what gives with the pid file locations? I might think that in a base install the pid file would be pointed to the same place? Obviously, I have figured out I really need to make these two enteries the same, but still. :(

1 0

Is this a NFSv4 bug??
by C. L. Martinez 29 Jan '13

29 Jan '13

HI all, I have configured a CentOS 6.3 x86_64 as a NFSv4 server and I am suffering errors like this: perl[7889]: segfault at a80 ip 00007fb870227ea2 sp 00007fff2fecda30 error 4 in libperl.so[7fb870193000+162000] The symptoms are the same as described in this thread: http://serverfault.com/questions/235059/vfs-file-max-limit-1231582-reached Can anyone confirm that is a bug when NFSv4 is used? My actual options are: fs.file-max = 1639200 [root@server01 fs]# lsof |wc -l 3962 [root@server01 fs]# cat file-nr 3040 0 1639200

3 3

CentOS-announce Digest, Vol 95, Issue 10
by centos-announce-request＠centos.org 29 Jan '13

29 Jan '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:0199 Important CentOS 6 libvirt Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 28 Jan 2013 21:41:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0199 Important CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20130128214146.GA12493(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0199 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0199.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 880a2564b9c1b120b001ebfc57a2765763ef66a170b40405deef201e4ba5698a libvirt-0.9.10-21.el6_3.8.i686.rpm f132baecba83484560d1720c9cefebe2029514315878b32f1bc7294473669937 libvirt-client-0.9.10-21.el6_3.8.i686.rpm d24ba4cdd52ea49e1a270a4a571e006f2f5e8b518af932e3124817cc193b45de libvirt-devel-0.9.10-21.el6_3.8.i686.rpm d7bca83b7d2ac0a2ec89f108158a88ff2907fc5fa974f4c2b8775b480daecca3 libvirt-python-0.9.10-21.el6_3.8.i686.rpm x86_64: 27d7eb63e13c6b6089f5dcd0b363236ea3d882062f7cfd392dc46317a48574ee libvirt-0.9.10-21.el6_3.8.x86_64.rpm f132baecba83484560d1720c9cefebe2029514315878b32f1bc7294473669937 libvirt-client-0.9.10-21.el6_3.8.i686.rpm fae89ea4ccc4e98dbe8bc0adf0d96ac3275e4818eb3a31f97407e891f467c92f libvirt-client-0.9.10-21.el6_3.8.x86_64.rpm d24ba4cdd52ea49e1a270a4a571e006f2f5e8b518af932e3124817cc193b45de libvirt-devel-0.9.10-21.el6_3.8.i686.rpm 1c1e7dea98cf5cfa0ba319525c5de482c7e4e1c64cb1ba279cb1a49819ac3245 libvirt-devel-0.9.10-21.el6_3.8.x86_64.rpm 82711c817a9fe952e876d56295ed186bd8e574be45acde611f7f2261923216a0 libvirt-lock-sanlock-0.9.10-21.el6_3.8.x86_64.rpm b966795762b8c83bfb11e16adf3f4847ee4b6b720a23c3c80afc005e8967403a libvirt-python-0.9.10-21.el6_3.8.x86_64.rpm Source: 05cb232df3bc8b740dbadae94666e4e260bfc119a5dc63d97f8953c1806a4504 libvirt-0.9.10-21.el6_3.8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 95, Issue 10 ***********************************************

1 0

Not respected repo priorities...
by John Doe 29 Jan '13

29 Jan '13

Ah ah, the demo effect... just after I said I did not have much issues with repos... ^_^ A collegue installed some packages (for perconna) and since then a server insists on replacing 2 base packages with 2 rfx packages, even when I gave a lower priority to rfx... Installed: perl-IO-Compress-Base-2.020-127.el6.x86_64 Installed: 1:perl-Compress-Raw-Zlib-2.020-127.el6.x86_64 Installed: perl-IO-Compress-Zlib-2.020-127.el6.x86_64 Installed: perl-Compress-Zlib-2.020-127.el6.x86_64 Installed: perl-HTML-Tagset-3.20-4.el6.noarch Installed: perl-HTML-Parser-3.64-2.el6.x86_64 Installed: perl-libwww-perl-5.833-2.el6.noarch Installed: perl-Params-Validate-0.92-3.el6.x86_64 Installed: perl-Log-Dispatch-2.26-1.el6.rf.noarch Installed: perl-Parallel-ForkManager-0.7.5-2.2.el6.rf.noarch Installed: 4:perl-Time-HiRes-1.9721-127.el6.x86_64 Installed: perl-Config-Tiny-2.12-7.1.el6.noarch # yum update Loaded plugins: changelog, fastestmirror, priorities, security Loading mirror speeds from cached hostfile * epel: mirror.affix.me * rpmforge: archive.cs.uu.nl * rpmforge-extras: archive.cs.uu.nl rpmforge | 1.9 kB 00:00 rpmforge-extras | 1.9 kB 00:00 1913 packages excluded due to repository priority protections Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package perl-Compress-Zlib.x86_64 0:2.020-127.el6 will be obsoleted ---> Package perl-IO-Compress.noarch 0:2.037-1.el6.rfx will be obsoleting --> Processing Dependency: perl(Compress::Raw::Bzip2) = 2.037 for package: perl-IO-Compress-2.037-1.el6.rfx.noarch --> Processing Dependency: perl(Compress::Raw::Zlib) = 2.037 for package: perl-IO-Compress-2.037-1.el6.rfx.noarch ---> Package perl-IO-Compress-Base.x86_64 0:2.020-127.el6 will be obsoleted ---> Package perl-IO-Compress-Zlib.x86_64 0:2.020-127.el6 will be obsoleted --> Finished Dependency Resolution Error: Package: perl-IO-Compress-2.037-1.el6.rfx.noarch (rpmforge-extras) Requires: perl(Compress::Raw::Bzip2) = 2.037 Available: perl-Compress-Raw-Bzip2-2.020-127.el6.x86_64 (base) perl(Compress::Raw::Bzip2) = 2.020 Error: Package: perl-IO-Compress-2.037-1.el6.rfx.noarch (rpmforge-extras) Requires: perl(Compress::Raw::Zlib) = 2.037 Installed: 1:perl-Compress-Raw-Zlib-2.020-127.el6.x86_64 (@base) perl(Compress::Raw::Zlib) = 2.020 You could try using --skip-broken to work around the problem Is it a yum/priority bug or a repoforge bug? I suspect it might be due to the new fedora release? Doesn't priority also blocks obsoleted/obsoleting packages...? I did a clean all... Thx, JD

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss