- Discuss - lists.centos.org

CentOS 8 - Fail to mount ${HOME}
by Yair Garfinkel 29 Jun '20

29 Jun '20

Hi, We have a large amount of CentOS 7 here and when a user logs in to any of them, his home directory is mounted of the network. When we tried to do this with CentOS 8, the user logs in but his home directory was created locally on the machine. - I have already disables this "nice" feature by running: [root@lab_cnt08 ~]# *authconfig --disablemkhomedir --update* - Both CentOS 7 and CentOS 8 machines reside in the same domain. Any thoughts or ideas would be appreciated. Thanks, *Yair Garfinkel*

1 0

Port forward internal host not working
by Rudi Ahlers 28 Jun '20

28 Jun '20

Hi, I am trying to reach a Raspberry Pi on my physical LAN (192.168.10.132), via OpenVPN, from the internet. The Internet host is 154.77.x.x. This is also the OpenVPN router, 10.8.0.1. The Pi is on 10.8.0.203. I am trying to reach port 3000 from the internet. >From the CentOS 7 server, I can access the Pi over OpenVPN: root@ns1:[~]$ telnet 10.8.0.203 3000 Trying 10.8.0.203... Connected to 10.8.0.203. Escape character is '^]'. But from the host IP, I cannot get it to connect: root@ns1:[~]$ telnet 154.77.x.x 3000 Trying 154.77.x.x .. telnet: connect to address 154.77.x.x: Connection timed out I have tried a few different iptables rules, but simply cannot get it working. As example: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A INPUT -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 8081 -j DNAT --to 10.8.0.202:8081 iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 3000 -j DNAT --to 10.8.0.203:3000 iptables -A FORWARD -i eth0 -p tcp --dport 8081 -d 10.8.0.202 -j ACCEPT iptables -A FORWARD -i eth0 -p tcp --dport 3000 -d 10.8.0.203 -j ACCEPT iptables -A FORWARD -i tun+ -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o tun+ -m state --state RELATED,ESTABLISHED -j ACCEPT -- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za

1 0

Optimizing Windows virtual machines
by Georgios 28 Jun '20

28 Jun '20

Hi! Im following the instructions found on RHEL 8 documentation. https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/ht… And when I'm trying to pass the command sudo virt-xml Windows10 --edit --features hyperv_relaxed=on,hyperv_vapic=on,hyperv_spinlocks=on,hyperv_spinlocks_ retries=8191,hyperv_vpindex=on,hyperv_runtime=on,hyperv_synic=on,hyperv _stimer=on,hyperv_frequencies=on I get the following error. ERROR Unknown --features options: ['hyperv_vpindex', 'hyperv_runtime', 'hyperv_stimer', 'hyperv_frequencies'] I can manually add the options on the xml file but i was wondering if the feature arguments are removed and they have no effect or if I'm missing something. Thanks in advance ps.Im running centos 8.1 since 8.2. broke my wifi.

1 0

HP vs. Brother Printers: Use with Centos/Fedora
by Jay Hart 28 Jun '20

28 Jun '20

If you had to rate which printer brand works better with Linux (Fedora and Centos), what would it be? TIA, Jay

12 15

C7, mdadm generating selinux warnings
by Fred Smith 27 Jun '20

27 Jun '20

Hi! I'm getting these frequently. several times I've done the steps listed there to suppress the messages, but I keep getting them. Anyone got a good idea how to deal with this? Thanks in advance! ---------------------------- SELinux is preventing mdadm from 'read, open' accesses on the file /var/log/rear/rear-fcshome.log.lockless. ***** Plugin restorecon (99.5 confidence) suggests ************************ If you want to fix the label. /var/log/rear/rear-fcshome.log.lockless default label should be var_log_t. Then you can run restorecon. The access attempt may have been stopped due to insufficient permissions to access a parent directory in which case try to change the following command accordingly. Do # /sbin/restorecon -v /var/log/rear/rear-fcshome.log.lockless ***** Plugin catchall (1.49 confidence) suggests ************************** If you believe that mdadm should be allowed read open access on the rear-fcshome.log.lockless file by default. Then you should report this as a bug. You can generate a local policy module to allow this access. Do allow this access for now by executing: # ausearch -c 'mdadm' --raw | audit2allow -M my-mdadm # semodule -i my-mdadm.pp Additional Information: Source Context system_u:system_r:mdadm_t:s0-s0:c0.c1023 Target Context system_u:object_r:cron_log_t:s0 -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- I can do all things through Christ who strengthens me. ------------------------------ Philippians 4:13 -------------------------------

1 0

CentOS-announce Digest, Vol 184, Issue 10
by centos-announce-request＠centos.org 26 Jun '20

26 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2020:2742 CentOS 6 microcode_ctl Enhancement Update (Johnny Hughes) 2. CEEA-2020:2743 CentOS 7 microcode_ctl Enhancement Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 25 Jun 2020 19:06:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2020:2742 CentOS 6 microcode_ctl Enhancement Update Message-ID: <20200625190630.GA20090(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2020:2742 Upstream details at : https://access.redhat.com/errata/RHEA-2020:2742 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c2d3d567831e3adaf69da74159dc89734888ca86bf5cff87bfcacb9ea516a188 microcode_ctl-1.17-33.29.el6_10.i686.rpm x86_64: 2194d70108cc49cbae3ea8e88208ac3f8b2df4c89e1574918e12981b146fc97f microcode_ctl-1.17-33.29.el6_10.x86_64.rpm Source: 2a7dfcbd7eb78b6a71755711d76a71c86b86e15e2227fef220f4964dc88127a5 microcode_ctl-1.17-33.29.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 25 Jun 2020 19:07:06 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2020:2743 CentOS 7 microcode_ctl Enhancement Update Message-ID: <20200625190706.GA20202(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2020:2743 Upstream details at : https://access.redhat.com/errata/RHEA-2020:2743 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3f199ac1b15b6e30cc81d6c399aaa04c2b71869b8fefbb9a689b95a796004805 microcode_ctl-2.1-61.10.el7_8.x86_64.rpm Source: c27f238562150886cf6d7a1a3d68e2878310f3a3ecb3b878dee240478a2ebc1f microcode_ctl-2.1-61.10.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 10 ************************************************

1 0

Softwarecollections and EL8
by Leon Fauster 25 Jun '20

25 Jun '20

Just a general question. Will software collections be available in EL8? Does RH plan to provide such alternatives? Or are Application Streams the new way to follow (I known that both are not equivalent and that they address different scenarios). https://wiki.centos.org/SpecialInterestGroup/SCLo/CollectionsList -- Leon

1 0

php 5.6 on CentOS 6
by H 25 Jun '20

25 Jun '20

I am in the process of moving various apps and data off a CentOS 6 server to a new server running CentOS 7. As part of the migration process I need to upgrade an app and corresponding data files which requires php 5.6. I do have php 5.5 (and 5.4) installed since earlier but now tried to install php 5.6 from SCL which failed. This is the package I tried: https://www.softwarecollections.org/en/scls/rhscl/rh-php56/ but the error message is that there is no package 5.6. Is this correct and what would the recommended procedure then be since I do need 5.6 for this. Use Remi's collection or something else? I was hoping SCL would have it since it is well-tried and easy to sandbox on the computer. Thank you. H

6 8

Blog article about the state of CentOS
by Nicolas Kovacs 24 Jun '20

24 Jun '20

Hi, I just read this blog article from austrian Linux expert Michael Kofler. For those among you who don't know the guy, he's my home country's number one Linux expert (known as "der Kofler") and most notably the author of a series of excellent books about Linux over the last 25 years. https://kofler.info/centos-8-wertlose-langzeitunterstuetzung/ Disclaimer : I've been a CentOS user (and fan) since 4.x, I'm using it on all my servers, and yes, I know the difference between upstream RHEL and CentOS. The article is in german, but the statistics graph is eloquent enough for the non-german-speaking users. It focuses on updates for CentOS 8, and more exactly the extended periods of time where there have been no updates available. The author's theory ("unspoken truth"): while it's a positive thing that Red Hat is sponsoring CentOS, the amount of sponsoring is just insufficient enough so that the product is "starved to death" by Red Hat (e. g. IBM) to encourage users to move to RHEL. The author's conclusion is quite severe: in the current state of things, CentOS 8 is not recommendable for production as updates are lagging too much behind. While CentOS 7 may be usable, CentOS 8 has been "degraded to teaching and testing purposes". Still according to Mister Kofler, this "sorry state of things" will probably encourage users to move to Oracle Linux, the other big RHEL clone. After some hesitation, I decided to share this on the mailing list. Since this raises some concerns, I'd be curious to have your take on this. Cheers from the sunny South of France, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Blog : https://blog.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

24 56

CentOS-announce Digest, Vol 184, Issue 9
by centos-announce-request＠centos.org 24 Jun '20

24 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2020:2656 CentOS 7 net-snmp BugFix Update (Johnny Hughes) 2. CEBA-2020:2658 CentOS 7 resource-agents BugFix Update (Johnny Hughes) 3. CEBA-2020:2660 CentOS 7 rsyslog BugFix Update (Johnny Hughes) 4. CEBA-2020:2657 CentOS 7 fence-agents BugFix Update (Johnny Hughes) 5. CEBA-2020:2666 CentOS 7 ca-certificates BugFix Update (Johnny Hughes) 6. CEBA-2020:2655 CentOS 7 ncompress BugFix Update (Johnny Hughes) 7. CESA-2020:2642 Important CentOS 7 unbound Security Update (Johnny Hughes) 8. CEBA-2020:2654 CentOS 7 cloud-init BugFix Update (Johnny Hughes) 9. CESA-2020:2663 Moderate CentOS 7 ntp Security Update (Johnny Hughes) 10. CESA-2020:2664 Important CentOS 7 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 23 Jun 2020 19:39:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2656 CentOS 7 net-snmp BugFix Update Message-ID: <20200623193903.GA27513(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2656 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2656 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5c0bf0073f01c726782c0de15f56dc6844dc45bcbb7dccd0d56f3b1cc189ea7c net-snmp-5.7.2-48.el7_8.1.x86_64.rpm 02c140eea0ec646667c3e5bcafb77e22831fb962346cc634afde9f8193f51a4c net-snmp-agent-libs-5.7.2-48.el7_8.1.i686.rpm e1fe727ad4c3c21e82a387cae425f4f1d0cb122ae453bdec77692ced05d12f1b net-snmp-agent-libs-5.7.2-48.el7_8.1.x86_64.rpm 3dd62cedb4e8131f64241a53d8a079167481875ce1afd6ba0dc13a0d3d2f8fef net-snmp-devel-5.7.2-48.el7_8.1.i686.rpm 6c75ffa234e81ec06467ae939b151eb7576c6a1d2ae9a084b685e429fcfe7a86 net-snmp-devel-5.7.2-48.el7_8.1.x86_64.rpm f567f74cd647ab8385a5f4ee47caad26e275004f93156cb6ee10e1dd8199eee5 net-snmp-gui-5.7.2-48.el7_8.1.x86_64.rpm 78dff1bff4f5cd5a84f58fbb6d5b907fffad62b46e7103b5ab276585c68d3b4e net-snmp-libs-5.7.2-48.el7_8.1.i686.rpm 40095b5d1251bdb075efc1332dbf0bc4d77878976ffd247ec8adfd60657148c9 net-snmp-libs-5.7.2-48.el7_8.1.x86_64.rpm b504a4aa520d9a8c98e82ec1284decae0f19dc0eede9eea23ecdb8fa9f03dd4d net-snmp-perl-5.7.2-48.el7_8.1.x86_64.rpm f5d09527738f1d197493253a95db63232b9a0b6248055d53aa14c490204fb3e3 net-snmp-python-5.7.2-48.el7_8.1.x86_64.rpm 7855d4ed5e164c3f3cacb8e604a558f9c3134cba39080616aeb1a16549eb6ad4 net-snmp-sysvinit-5.7.2-48.el7_8.1.x86_64.rpm aa67b6ad522a919688c63079a6fe2e1c702230fce8426445355e2bccaa6b5b4f net-snmp-utils-5.7.2-48.el7_8.1.x86_64.rpm Source: 626018542748f9a1f20521a00822d4ba53e8e79736609394215f28e706d6d178 net-snmp-5.7.2-48.el7_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 23 Jun 2020 19:39:20 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2658 CentOS 7 resource-agents BugFix Update Message-ID: <20200623193920.GA27635(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2658 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2658 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7ede75337aeaab6df18ec2f375702708f5d528462ed5f0da66f588704fc87401 resource-agents-4.1.1-46.el7_8.2.x86_64.rpm 3bdcd8a256733768faf9fd06ed664b4c9cdb5e829048fb80b76300dba373a0ca resource-agents-aliyun-4.1.1-46.el7_8.2.x86_64.rpm e91dfb1257041eea3e8184beb85ce2ff6029c3fb85e344015dffbfcc88c353b6 resource-agents-gcp-4.1.1-46.el7_8.2.x86_64.rpm Source: 92ae7a64b35be5e62b918cecd5291a55dc9b0ac43db60ab89580af03a1be11df resource-agents-4.1.1-46.el7_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 23 Jun 2020 19:40:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2660 CentOS 7 rsyslog BugFix Update Message-ID: <20200623194014.GA27933(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2660 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2660 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9438f230bd6e32ba33aa6e9e9406a33da90801760a64e52c89c89d6b189c4e41 rsyslog-8.24.0-52.el7_8.2.x86_64.rpm 021a436629241f782f3cf3796954dec4e4466425bdc9c4e0ae9e7655704b4698 rsyslog-crypto-8.24.0-52.el7_8.2.x86_64.rpm ceb23c4d9ff669ba534b9e01c9096e49b3233a7320ed99c46f9bf7ad2372ce58 rsyslog-doc-8.24.0-52.el7_8.2.noarch.rpm 9244489c6c30901054ed0fb0ba1f411677635e307d158d0e32080b7a5d87fa7a rsyslog-elasticsearch-8.24.0-52.el7_8.2.x86_64.rpm 4ee0090570a9929203881cd6b1426ed07208c803869d28617cc82c6c4ef5d601 rsyslog-gnutls-8.24.0-52.el7_8.2.x86_64.rpm c60e442bb4c7cc16a7b3c43648c38bd8346ea21030dba85c0218a275982134c8 rsyslog-gssapi-8.24.0-52.el7_8.2.x86_64.rpm 44077a65b7d0d1f2078dfaa46e1bd72cc93ca48e18db0561d4fe85ad63c4fd0c rsyslog-kafka-8.24.0-52.el7_8.2.x86_64.rpm bdc8a6b61ea66f923080c91d36750c1004c5f38f99656b1afbc9856cc9f7badb rsyslog-libdbi-8.24.0-52.el7_8.2.x86_64.rpm 9624e472684e0ea486ae659387b101d2d9089cbd399991257ce1a16f4f40d220 rsyslog-mmaudit-8.24.0-52.el7_8.2.x86_64.rpm 0ae469db61f137e7fd46dd5241ffcb32c50ce05afb1a5eb1ceec58ae70c69456 rsyslog-mmjsonparse-8.24.0-52.el7_8.2.x86_64.rpm 898718fea255476ca58336caecbde9840adadba21ef0da0a1e27df2a77c8b803 rsyslog-mmkubernetes-8.24.0-52.el7_8.2.x86_64.rpm 0459c515f59f9dfdb7997b4fd49a9540abcd4e8e8b477e1b44162ce2b6e62c86 rsyslog-mmnormalize-8.24.0-52.el7_8.2.x86_64.rpm cb6230bc7ae4a3422f55238dd0d770fb0eb27ea243e762a0d5273aba9f782edf rsyslog-mmsnmptrapd-8.24.0-52.el7_8.2.x86_64.rpm 7a812e0c2d2d20c7845881da5a3f2e5e5a23496346bc8685d061b74b5091acc2 rsyslog-mysql-8.24.0-52.el7_8.2.x86_64.rpm 8e00ef8301658cf85bf54110bee343387bcdd873875ae8b9f7365525b41854d4 rsyslog-pgsql-8.24.0-52.el7_8.2.x86_64.rpm fdf7b5e0d1ca2c369ee7107660d72a84985e2f3b2c0ecda1d07f58e98a0d268f rsyslog-relp-8.24.0-52.el7_8.2.x86_64.rpm b94a296fcc800c20fd7cf0d81e991b86cc0763c54d55a1c084bb1a6bb846354c rsyslog-snmp-8.24.0-52.el7_8.2.x86_64.rpm 29a406f31c8ca59e8604dcedc1810d8a427622047789b068e412ca59226be1e5 rsyslog-udpspoof-8.24.0-52.el7_8.2.x86_64.rpm Source: adec0a9623a73461afabd046fa89f34a09106f9af457c4df8f250ffe75894bf6 rsyslog-8.24.0-52.el7_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 23 Jun 2020 19:42:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2657 CentOS 7 fence-agents BugFix Update Message-ID: <20200623194209.GA28488(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2657 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2657 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 240a697def27942418fd0f9e7c6af29e2d03b41f3081f8a069a7f7a2d55ad10b fence-agents-aliyun-4.2.1-30.el7_8.1.x86_64.rpm 4b8b44ae9cbd44f5dcc0a751a6ba81c4dbf7d3f473cb211bd6f4fd5d569fe45b fence-agents-all-4.2.1-30.el7_8.1.x86_64.rpm 45a40ffb3cd834f5f4719f341ed97db85b065b37be12b7f6f1c08e4876e30e59 fence-agents-amt-ws-4.2.1-30.el7_8.1.x86_64.rpm b3e9fa2cba1e3a679d8406089102cb31569d8791a47df3bae6bde721e6e0693e fence-agents-apc-4.2.1-30.el7_8.1.x86_64.rpm 4a987705da9bbd6825d89c0af5739ce486644cadf7d486f0af766f28384c17e6 fence-agents-apc-snmp-4.2.1-30.el7_8.1.x86_64.rpm 99660cef91c9fd8b11ee2dd949f35b888064cf52c5de30d177f7fedaa37ecb9e fence-agents-aws-4.2.1-30.el7_8.1.x86_64.rpm 2ae1d0e7d6d78acdf93f1fe355768243456df920b39f1b6b591628a7d882510b fence-agents-azure-arm-4.2.1-30.el7_8.1.x86_64.rpm c76c0e06a5ca640c494b82f8a7165a34514b11863abba625af6e982951bb8d70 fence-agents-bladecenter-4.2.1-30.el7_8.1.x86_64.rpm 398934e3d72028a2979a3680a8ca1711a4b7c96c2a1eee186e84d6b9096abb10 fence-agents-brocade-4.2.1-30.el7_8.1.x86_64.rpm f8ad482008da482254cd76dad9c4af18a436abd01fec9d57330ee42a6f016946 fence-agents-cisco-mds-4.2.1-30.el7_8.1.x86_64.rpm eb0a13cfc81da6b3dfd19b0e283c24743bdb6cf978e2dc2a1e9082a4d7e53603 fence-agents-cisco-ucs-4.2.1-30.el7_8.1.x86_64.rpm 19a867c1f5b842677528d59ffa21e5934642739b2c552d033aa661acc0a8c12f fence-agents-common-4.2.1-30.el7_8.1.x86_64.rpm 95f5800dcb43d8716920efec3e2b49e3343759ea5cdf4f445602dfe506c3b2a9 fence-agents-compute-4.2.1-30.el7_8.1.x86_64.rpm 84bb9621759e61db91aa7408feaa8cac1d674dfbe8601a2547907715290ed25d fence-agents-drac5-4.2.1-30.el7_8.1.x86_64.rpm 866536aff0703eb0e523de1e8e68dfdbe75f07a6b87a7ca7e57d6dd762b2461e fence-agents-eaton-snmp-4.2.1-30.el7_8.1.x86_64.rpm 82d4a3590fa2a78fa4a50a9ef4a2782682d2e11f91d00821ca79be88cb12c164 fence-agents-emerson-4.2.1-30.el7_8.1.x86_64.rpm 170760d56dc65add0cc332b015119ce117570122a691fa2475852ea110d06769 fence-agents-eps-4.2.1-30.el7_8.1.x86_64.rpm b51bd5f7dae8bf7bf215afd37e2b45b55f91a407f8bfb5c8ae1d862e94113505 fence-agents-gce-4.2.1-30.el7_8.1.x86_64.rpm fcdce5a6314357c81862a1fd1b0046fcb2d408d2ab546ae99322e585f8b164e4 fence-agents-heuristics-ping-4.2.1-30.el7_8.1.x86_64.rpm 8b6fd9b7014871ca7c13842cd5811cc34270fec98f9ff063e33987d4e0e2c116 fence-agents-hpblade-4.2.1-30.el7_8.1.x86_64.rpm 3003b3379b797d5fc43ea4a89cd2b6f3965e37a4feedae950fb8a0c1124ba49c fence-agents-ibmblade-4.2.1-30.el7_8.1.x86_64.rpm 58ec2990b29198a08b0146d788c9b9e0f435736523da8398383802f5969ad29f fence-agents-ifmib-4.2.1-30.el7_8.1.x86_64.rpm 650dad94ddf702babe3457b0bce9e2fa252b44f7101bf2a8c2858167ea31bc77 fence-agents-ilo2-4.2.1-30.el7_8.1.x86_64.rpm 56de0b036954f4e56236374926ec4e61410438e8e37775eb85fa58b5a90e1504 fence-agents-ilo-moonshot-4.2.1-30.el7_8.1.x86_64.rpm 7e4ff1f698c2a095271cf6af319978552c2d17f68410ab68be05cb8b562bd0da fence-agents-ilo-mp-4.2.1-30.el7_8.1.x86_64.rpm e4496826bd53c9f948c39b9df5211fbb2060e22f7ee352466f88e767fbde7b15 fence-agents-ilo-ssh-4.2.1-30.el7_8.1.x86_64.rpm 52896a68ac55ef986af94b3ca45e01e085deb98468f56e5b564cc15f97721a44 fence-agents-intelmodular-4.2.1-30.el7_8.1.x86_64.rpm 5b86470404ac0c5942abc3b49fca0bfb9e92f0a0ccaca72d6b0b8fb89bb7ea97 fence-agents-ipdu-4.2.1-30.el7_8.1.x86_64.rpm 109cf4b9ddac77e8a1e5654241ac108869edba02189b4b68a31f921a31d9f80d fence-agents-ipmilan-4.2.1-30.el7_8.1.x86_64.rpm 429b4a70f72623375440e0effaab9ba1cf6414a9b0e10bd967891e2c0d3c8565 fence-agents-kdump-4.2.1-30.el7_8.1.x86_64.rpm fc17a81dd32713cee64c4b9d7f2d6c02e8c8e964f492866efe24c1f85bcf1da1 fence-agents-mpath-4.2.1-30.el7_8.1.x86_64.rpm c82311456d37b93e9e52e4c0b6ec3032ede94e3091305cd9ca96f60c946ff97e fence-agents-redfish-4.2.1-30.el7_8.1.x86_64.rpm d3c537580b11d6eef85ccc194fd9cdf2cbe9770c97ab3890a70df6b9b98c0df6 fence-agents-rhevm-4.2.1-30.el7_8.1.x86_64.rpm 6236a08df78faec677498f477cf4db4421073de9951f5c968ea408d1db5927d0 fence-agents-rsa-4.2.1-30.el7_8.1.x86_64.rpm 7e10ac7d70006d7df9e218eb674782307c5afb8a24765bda7685713a44cd27da fence-agents-rsb-4.2.1-30.el7_8.1.x86_64.rpm 9df4e26fef9cd19b9d947b63465752f15cef0d4d6da0d8d7908adb4f4b03ca4f fence-agents-sbd-4.2.1-30.el7_8.1.x86_64.rpm 2dc8ad3f26888289bd8bbd349c51e2b1211de805c0caac5facb9aae1487ef296 fence-agents-scsi-4.2.1-30.el7_8.1.x86_64.rpm 93212c433421f59b21083fd51a342ddc98c3eba12efd2a2cb4c15744e38a12a1 fence-agents-virsh-4.2.1-30.el7_8.1.x86_64.rpm d570166e370cae3b680b0f499d444694f2071e2e62af25c4808896f013c3a6c5 fence-agents-vmware-rest-4.2.1-30.el7_8.1.x86_64.rpm a87bb5955e46030b7c7418f4b7edb5d57ec46d2164df8aa28d2f22f1c69882b1 fence-agents-vmware-soap-4.2.1-30.el7_8.1.x86_64.rpm 645893528fdcc319c0b15d8312efc01181352570f9c79c0f49e3458e7a664c4c fence-agents-wti-4.2.1-30.el7_8.1.x86_64.rpm Source: 39d1e456b84f160db6bc209842ca5a517af3e4ddc87b9f44df887754e12c0454 fence-agents-4.2.1-30.el7_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Tue, 23 Jun 2020 19:42:19 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2666 CentOS 7 ca-certificates BugFix Update Message-ID: <20200623194219.GA28625(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2666 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2666 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1095e8edd8713c148159831eda79522d8eae5c52f1930b7a570a157f3ccf2fc2 ca-certificates-2020.2.41-70.0.el7_8.noarch.rpm Source: 1b9a14d6ab72c91a5c32b98be52bc752ef37874fcc7316904dda274b777482ee ca-certificates-2020.2.41-70.0.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Tue, 23 Jun 2020 19:42:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2655 CentOS 7 ncompress BugFix Update Message-ID: <20200623194227.GA28765(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2655 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2655 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 74092631979cf38a57432c514323ea5ef3bfa80af4809511a285d17d23cfda85 ncompress-4.2.4.4-3.1.el7_8.x86_64.rpm Source: 04320bf1d8e53c84fb094ed195d8c6ee81dadb2e617d84fba288659f477203db ncompress-4.2.4.4-3.1.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Tue, 23 Jun 2020 19:42:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2642 Important CentOS 7 unbound Security Update Message-ID: <20200623194244.GA28904(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2642 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2642 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1664066f33b5ffb6a1fd8099211332a04ca7a4e431db14135e8e98690fc582ef unbound-1.6.6-5.el7_8.x86_64.rpm e30d6d4bc2ab1f6e252a2224542df587a6ab89d1002a2208a97f9b20709a5987 unbound-devel-1.6.6-5.el7_8.i686.rpm ee540a63c08cb4f3f1f9cbb31ed6aafb384759e068538775b84cd90e81a5cd6f unbound-devel-1.6.6-5.el7_8.x86_64.rpm e968be754e361bfe672d5ae44b63eecdf12bb80c9fda568b616607a04ad38f0e unbound-libs-1.6.6-5.el7_8.i686.rpm da16632d7149f16e3489b739365d7556eff8615887d95e42973a6a705fcb1ffb unbound-libs-1.6.6-5.el7_8.x86_64.rpm 54808d8a68eb9d59685dc486aa42bda7790ee488beb63004205beee5d337c39e unbound-python-1.6.6-5.el7_8.x86_64.rpm Source: d51d4631c5b252cf0cfa4726c980cea159cba977a7a56b7ad4a5ebb9a2706dd1 unbound-1.6.6-5.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Tue, 23 Jun 2020 19:52:19 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2020:2654 CentOS 7 cloud-init BugFix Update Message-ID: <20200623195219.GA29223(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2020:2654 Upstream details at : https://access.redhat.com/errata/RHBA-2020:2654 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 774586985f6797ac1a29a50532b0fc53b8c3a71a8f6585deb3b20a80f98c8089 cloud-init-18.5-6.el7.centos.5.x86_64.rpm Source: 8ed20a5f94eff19f98b3314cde30ef84c391a53b00cf8c12393e9c359364a08a cloud-init-18.5-6.el7.centos.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Tue, 23 Jun 2020 19:52:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2663 Moderate CentOS 7 ntp Security Update Message-ID: <20200623195257.GA29411(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2663 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:2663 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 17b8b7fb5bc2f60797d15288cbf7fb16b1e1679974495b7e3ffafccba9afc421 ntp-4.2.6p5-29.el7.centos.2.x86_64.rpm b3af9ec7af3531a10c4b4a67f9694f943ff9178d57d9c254ee26b243e65180bb ntpdate-4.2.6p5-29.el7.centos.2.x86_64.rpm afaa676d99e9b9d69acb38584e2ad780e9e1a2dc151d867c498c82691990b24b ntp-doc-4.2.6p5-29.el7.centos.2.noarch.rpm 5dd63565630482b3a473c6327e2180a6565a8557ae7aab7b7df69fe08a8f2ef0 ntp-perl-4.2.6p5-29.el7.centos.2.noarch.rpm e406062a5f59cbe1ff6894cf9b78234ba37b4e7a999bc626f57a658aa3c2e477 sntp-4.2.6p5-29.el7.centos.2.x86_64.rpm Source: 3da0202fa8fb740e2df2f4335cde79617184a4fce0de390e5ac65a8675dc3e93 ntp-4.2.6p5-29.el7.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Tue, 23 Jun 2020 19:56:05 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2664 Important CentOS 7 kernel Security Update Message-ID: <20200623195605.GA29707(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2664 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2664 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: fea11f1f43122034495bbb00d8328241b4194870e1586a2f13c86acad5f200cc bpftool-3.10.0-1127.13.1.el7.x86_64.rpm 2cbc65b4a7edc0007198d777b5e05f108a7354900788e57a150615ea2dc61a1b kernel-3.10.0-1127.13.1.el7.x86_64.rpm e708cd201fef13a20a5e84ce793c7aa9b983a061e2a86704f88fb58a1416f0aa kernel-abi-whitelists-3.10.0-1127.13.1.el7.noarch.rpm f392ba5c44fc12a2654426bc10c57d362ac159a6b40bc01f69ffc48b208af455 kernel-debug-3.10.0-1127.13.1.el7.x86_64.rpm 030c7bcd0b5e056a200890d171b8afde0050f8cefea2d83d38028a06ab325fdd kernel-debug-devel-3.10.0-1127.13.1.el7.x86_64.rpm ac6178fe111f80a51372e5f51e31ca22ac8e2e8be9def8dc6cfada278714f668 kernel-devel-3.10.0-1127.13.1.el7.x86_64.rpm 06b86d938f20ad56e7b9859c39858533f28837abcc828bef1ed7dab770e346a7 kernel-doc-3.10.0-1127.13.1.el7.noarch.rpm 2136f97b4ffab69541515944bf287e2e8769539a9198dd492b9387aebfa2b774 kernel-headers-3.10.0-1127.13.1.el7.x86_64.rpm fa043864299423d3768fcda7d3a0636a3e6e0be4d1990f5ddece0bbe7a50fd40 kernel-tools-3.10.0-1127.13.1.el7.x86_64.rpm 7a353305131989e1d1754993e230a438787c307f46fe345d990c552acd0408fe kernel-tools-libs-3.10.0-1127.13.1.el7.x86_64.rpm 1ca76869c653375c7473b1b60a3da7ad326cecd3881f33af692790d8a7379da4 kernel-tools-libs-devel-3.10.0-1127.13.1.el7.x86_64.rpm 7a37e2ac9c61a7f20b6ebdf46e524c173035b53ddc014a14b0ba1c687693b62a perf-3.10.0-1127.13.1.el7.x86_64.rpm aefc4c4382dc37e30d7fd8ffeebef7fa0b53ffe3606ffc3c8932b0f70c250231 python-perf-3.10.0-1127.13.1.el7.x86_64.rpm Source: 86c9451ec166c18052db0aa8c327e884267a0e72ef8cdc1e735b7f6f846715a1 kernel-3.10.0-1127.13.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 9 ***********************************************

1 0

Wrong version of php
by H 24 Jun '20

24 Jun '20

It's been a while since I updated to php72 on this machine and there is some setting I must have forgotten. Apache, root and a user automatically get php72 when I run php in a terminal window, however, a php script picks up the wrong version of php, ie php54 and the version of php in /usr/bin/php is indeed version 5.4. I have googled without finding the answer but how do I make sure /all/ processes use php72 rather than the default 54 in CentOS 7? Surely there must be a better way than overwriting /usr/bin/php. What have I forgotten to do? Thank you.

5 11

Accounting package recommendations
by Rudi Ahlers 23 Jun '20

23 Jun '20

Hi, I am looking for an offline accounting package recommendation, please. I enjoyed using Xero accounting, but need something that's offline, and where the data remains my property. Having used Quickbooks on Windows in the past, I am looking for something similar. Any recommendations? -- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za

10 12

NetworkManager, Centos 8, Ipv6 Prefix Delegation
by Joe 23 Jun '20

23 Jun '20

Hello, i try to use (Centos8) NetworkManager builtin Prefix-Delegation for ipv6. Unfortunately i found no howto is helping me. i do: /etc/NetworkManager/NetworkManager.conf: [main] dhcp=dhclient Modify Cons: nmcli con modify LOKAL1 ipv6.method shared nmcli con modify LOKAL2 ipv6.method shared nmcli con modify WAN_TK ipv6.method dhcp Before these modifications i got over pppoe the public ipv6. Now only ipv4. These steps are right/necassary. I see in logs these message: NetworkManager[5204]: <warn> [1592929660.5084] device (enp6s0.7.wan): failure to start DHCPv6: missing MAC address What is todo? Thanks a lot. Joe

1 0

firewall questions
by Chuck Campbell 23 Jun '20

23 Jun '20

I'm running Centos 7.8.2003, with firewalld. I was getting huge numbers of ssh attempts per day from a few specific ip blocks. The offenders are 45.0.0.0/24, 49.0.0.0/24, 51.0.0.0/24, 111.0.0.0/24 and 118.0.0.0/24, and they amounted to a multiple thousands of attempts per day. I installed and configured fail2ban, but still saw a lot of attempts in the logs, and the ipset created was filling up. I did some more research, and decided to use a few rich rules to block these attempts. I currently have these in place: #firewall-cmd --list-all public (active) target: default icmp-block-inversion: no interfaces: p3p1 sources: services: dhcpv6-client ftp http https imap imaps pop3 pop3s smtp-submission smtps ssh ports: 110/tcp 995/tcp 143/tcp 993/tcp 25/tcp 21/tcp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: rule family="ipv4" source address="49.0.0.0/24" reject rule family="ipv4" source address="51.0.0.0/24" reject rule family="ipv4" source address="111.0.0.0/24" reject But I still get hundreds of attempts reported in my fail2ban logs from these ip blocks. How is it that the rich rules don't drop these packets before pam/ssh/fail2ban ever get to see them? There must be some precedence in the firewalling I don't understand. -chuck -- ACCEL Services, Inc.| Specialists in Gravity, Magnetics | (713)993-0671 ph. | and Integrated Interpretation | (713)993-0608 fax 448 W. 19th St. #325| Since 1992 | (713)306-5794 cell Houston, TX, 77008 | Chuck Campbell | campbell(a)accelinc.com | President & Senior Geoscientist | "Integration means more than having all the maps at the same scale!"

7 7

CentOS-announce Digest, Vol 184, Issue 8
by centos-announce-request＠centos.org 23 Jun '20

23 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2020:2615 Important CentOS 7 thunderbird Security Update (Johnny Hughes) 2. CESA-2020:2613 Important CentOS 6 thunderbird Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 Jun 2020 21:47:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2615 Important CentOS 7 thunderbird Security Update Message-ID: <20200619214741.GA24830(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2615 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2615 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ab6911fa3852547565729fdebb90a6dfd7037df9b68c6c7673107494aa4acb30 thunderbird-68.9.0-1.el7.centos.x86_64.rpm Source: 5234ba5004b097341a81536325039081e0ae1bd9310c184c6d0b634dbdff33a4 thunderbird-68.9.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 19 Jun 2020 21:49:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2613 Important CentOS 6 thunderbird Security Update Message-ID: <20200619214949.GA25009(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2613 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2613 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a3c0238b4566d90fd029bc2edabb1b0c27a40c7833397c2c0f1a954f7baee5bb thunderbird-68.9.0-1.el6.centos.i686.rpm x86_64: 42720ce2acc09a86bfe1d5b0b1343be2bb52dae65776683e8163086419f5f825 thunderbird-68.9.0-1.el6.centos.x86_64.rpm Source: b9c6e2e8e9f5ddbde45f72058b6ddb4ded9ff2d7ddbbd7f1f3c240d83fddb200 thunderbird-68.9.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 8 ***********************************************

1 0

Re: [CentOS] About support for AMD ROME CPUs (Alexander Dalloz)
by 肖正刚 23 Jun '20

23 Jun '20

Hi, Alexander Thanks for your reply . Because we using CentOS7.6 with kernel 3.10.0-957.21.3.el7.x86_64 in production . We want to know which version of CentOS(or CentOS7.6) started to support AMD ROME CPUs and is it necessary to upgrade ? Thanks.

1 0

About support for AMD ROME CPUs
by 肖正刚 21 Jun '20

21 Jun '20

Hi, all We use AMD Rome CPUs, like EPYC 7452. RHEL said that RHEL 7.6.6 began to support these cpus(detials: https://access.redhat.com/support/policy/amd) , but we found that CentOS7.6 with kernel 3.10.0-957.21.3.el7.x86_64 also works fine. So, my questions are: 1) Is there any place that i can find the cpu support info? 2) Dose the kernel 3.10.0-957.21.3.el7.x86_64 from CentOS7.6 already contains changes made by kernel 3.10.0-957.27.2.el7 from RHEL7.6? 3) Does the kernel update has a release note or something like that and where to find ? Any suggestions will help ! Thanks

2 1

Installing owncloud on CentOS 7 server
by H 19 Jun '20

19 Jun '20

I transitioning an owncloud installation from a C6 server to a new C7 server and used yum install owncloud to install it on the C7 server. I expected /var/www/owncloud to be generated but alas not. Quick Googling just showed examples of installing from the latest owncloud repository but not using yum. Have I missed something obvious when using yum to install?

3 7

Updating microcode_ctl froze Centos7
by Robin Lee 19 Jun '20

19 Jun '20

Today when I ran yum update two packages came up microcode_ctl and unbound-libs. The updating process went fine until it outputted Running transaction Updating : 2:microcode_ctl-2.1-61.6.el7_8.x86_64 then it just froze. I could no longer ssh to the machine and the console was just blank. I had to shut down it hard. It came back up seemingly fine. But yum update doesn't work anymore. It says "Error importing repomd.xml from base/7/x86_64: Damaged repomd.xml file" I looked at the logs, but journalctl only shows the latest boot on this machine. So I guess I have three questions - Any idea what happened with the update process? - How can I repair repomd.xml? - How do I configure journalctl to store more boots? /Robin

5 9

Amd es1000
by paride desimone 19 Jun '20

19 Jun '20

Hi, i have a proliant dl380 g5, with an amd as1000. I try to install centos8 with gui, but when try to start the new installed system, the xserver don't start. There is a throuble with the amd es1000 driver. This grafic card, seems not supported more from amd. I need a minimalistic gui for study for rhcsa certification. The gui is mandatory for the exam. Any help? Paride

5 14

Bootable USB keys : which brand ?
by Nicolas Kovacs 19 Jun '20

19 Jun '20

Hi, In my daily work I'm mainly using USB keys for work : one with CentOS 7, one with OpenSUSE Leap 15.1, one with Slax Live for data recovery purposes, one with Ghost4Linux and one with FreeDOS which I use for flashing the odd BIOS. Last week I bought a set of three flashy colored USB keys in a local shop. To my surprise, none of them seem to be able to boot anything. When I write a bootable image (CentOS, OpenSUSE, whatever) to any one of the USB keys, the USB key boot option doesn't show up on any one of my sandbox PCs. Looks like I just learnt the hard way that some USB keys can't be used for installation purposes. As far as I can tell, I need a set of 8 GB keys so the biggest image, the CentOS 8 ISO, can fit. Can you recommend a no-nonsense USB key brand which I can use to make a set of USB installation keys ? Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Blog : https://blog.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

3 3

Apache (httpd) fails to start at boot - Centos 8.1
by Jay Hart 19 Jun '20

19 Jun '20

If I do 'systemctl start httpd', apache will start right up. But during boot, it doesn't and I get the resulting errors below. Jun 15 21:17:28 dream httpd[1534]: (99)Cannot assign requested address: AH00072: make_sock: could not bind to address 10.20.30.11:80 Jun 15 21:17:28 dream httpd[1534]: no listening sockets available, shutting down Jun 15 21:17:28 dream httpd[1534]: AH00015: Unable to open logs Jun 15 21:17:29 dream systemd[1]: httpd.service: Main process exited, code=exited, status=1/FAILURE Jun 15 21:17:29 dream systemd[1]: httpd.service: Failed with result 'exit-code'. the box's ip address is 10.20.30.11, and I am trying to get http (80), and https (443) going. Firewall is turned on. The listen parameter in httpd.conf is 10.20.30.11:80 The log files in /var/log/httpd are all owned by root. Httpd runs as user 'apache'. Google searches have not returned anything that looks remotely promising. Got any suggestions? Thanks in advance, Jay

8 11

Can't access Squirrelmail on Centos 8
by Jay Hart 19 Jun '20

19 Jun '20

Good evening, I have not able able to run the http://ip-addr/src/configtest.php script, nor access Squirrelmail. Looking for suggestions on what I might have missed. When I try either http://ip-... or https://ip-..., I get the following reply Forbidden You don't have permission to access /webmail/src/configtest.php on this server. I got squirrelmail installed in /usr/share/squirrelmail and 'configured' to work (using ./conf.pl). This setup below is about the same setup on my Centos 6 box. I'm thinking my issue is more Apache configuration related than Squirrelmail. **Apache is running with no issues** Below are some of my settings in /etc/httpd/conf/httpd.conf Apache ServerRoot is /etc/httpd Apache DocumentRoot is /www Further parameters within httpd.conf include: # # Relax access to content within /var/www. # <Directory "/www"> AllowOverride None # Allow open access: Require all granted </Directory> # Further relax access to the default document root: <Directory "/www"> Options Indexes FollowSymLinks AllowOverride None # # Controls who can get stuff from this server. # Require all granted </Directory> In /etc/httpd/conf.modules.d I created a file called 16-squirrelmail.conf That file contains the following information: # SquirrelMail is a webmail package written in PHP. # Alias /webmail /usr/share/squirrelmail <Directory "/usr/share/squirrelmail/plugins/squirrelspell/modules"> #<Directory "/usr/share/squirrelmail"> AllowOverride None Require all denied </Directory> # this section makes squirrelmail use https connections only, for this you # need to have mod_ssl installed. If you want to use unsecure http # connections, just remove this section: #6-12-2020 commented out next five lines to test sqmail in http mode only <Directory /usr/share/squirrelmail> RewriteEngine on RewriteCond %{HTTPS} !=on RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} </Directory> Any suggestions???? Thanks, Jay

5 11

CentOS 8 gvs question
by Jerry Geis 18 Jun '20

18 Jun '20

I am getting a timeout on running totem .... searching led me to think its gvs related.... Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.GoaVolumeMonitor: Timeout was reached (g-io-error-quark, 24) Then totem does start - but with like a 30 second delay. I ran this command and it says its inactive systemctl --user status gvfs-mtp-volume-monitor.service ● gvfs-mtp-volume-monitor.service - Virtual filesystem service - Media Transfer Protocol monitor Loaded: loaded (/usr/lib/systemd/user/gvfs-mtp-volume-monitor.service; static; vendor preset: enabled) Active: inactive (dead) What is the cause of my timeout ? Thanks, jerry

1 0

CentOS 8.2 corrupt pxeboot kernel
by isdtor 18 Jun '20

18 Jun '20

Attempting to PXE boot from the BaseOS/x86_64/kickstart/images/pxeboot/ files results in repeating messages Invalid or corrupt kernel image eventually changing to Could not find kernel image: centos8.2.x86_64/vmlinuz I downloaded the files again, from a different mirror, and they are all the same. Wiped the files and recreated /tftpboot/linux-install/centos8.2.x86_64/. No dice. First mirror 89251241a484010b98280ce00b3a3763 os/images/pxeboot/initrd.img 9261bb24add6bb4ff9ef6aaf348aaf35 os/images/pxeboot/vmlinuz Second mirror 89251241a484010b98280ce00b3a3763 os/images/pxeboot/initrd.img 89251241a484010b98280ce00b3a3763 kickstart/images/pxeboot/initrd.img 9261bb24add6bb4ff9ef6aaf348aaf35 os/images/pxeboot/vmlinuz 9261bb24add6bb4ff9ef6aaf348aaf35 kickstart/images/pxeboot/vmlinuz

2 2

Compile gnutls yo install samba-4.12.3
by Rommel Rodriguez Toirac 17 Jun '20

17 Jun '20

Hello all; Has anyone installed samba4 from sources (samba-4.12.3.tar.gz) on CentOS 7? I explain the problem: to install samba-4.12.3 you need to install a version equal to or greater than 3.4.7 of gnutls; this (gnutls) depends on nettle and gmp. I am trying to install gnutls-3.6.14; I already have gmp (gmp-6.2.0) and nettle (nettle-3.6) installed (compiled from sources), but gnutls doesn't want to install, it tells me "Libnettle 3.4.1 was not found" when I run the ./configure Nettle is installed in /usr/local/include/nettle (all .h) and in /usr/local/lib64/libnettle.s0.8.0 I created a symbolic link for /usr/lib64 from /usr/local/lib64/libnettle.s0.8.0 as libnettle.so and libnettle.so.8; I ran the gnutls ./configure again, but it keeps saying it can't find libnettle 3.4.1 How can I do? Has anyone got CentOS 7 and samba-4.12.3 installed and fixed this situation? -- Rommel Rodriguez Toirac rommelrt(a)nauta.cu

2 1

EL8 / certwatch missing
by Leon Fauster 17 Jun '20

17 Jun '20

I have some scripts using certwatch from the crypto-utils package. This rpm seems to be unshipped with EL8. Any ideas whats the "new" tool to check pem cert files? -- Leon

3 3

firewall help request
by david 17 Jun '20

17 Jun '20

Folks I'm struggling with my firewall settings, and would appreciate some help. I have a gateway machine (currently Centos 7 with IPV4 only) with two NICs. One is connected to the internet, the other to an internal network (10.0.0.0/24) of mixed hardware (windows7, android tablets, android phones, linux boxes) using NAT. I wish to block all outgoing connects to any external IP address on port 22 (ssh) originating from any internal machine except one (which has a known internal IP address). I've tried some commands using 'iptables' to accomplish this, but so far have failed. If anyone has a suggestion, I'd really appreciate it. In addition, a suitable version for 'firewalld' could be useful, as an upgrade to Centos 8 is in plan. Examples of what I've tried, and then tested. None of them stopped an outgoing SSH from an internal system. iptables -I INPUT -p tcp --dport 22 -s 10.0.0.0/24 -j DROP iptables -I INPUT -p tcp --dport 22 -s 10.0.0.0/24 -j DROP Much thanks David

7 8

Centos7 and Vlan
by Alfredo De Luca 17 Jun '20

17 Jun '20

Hi all. I wonder if you can help me here. I have centos7 with 1 network interface and on that IFwe have 2 vlan. >From both vlan we'd like to reach the internet independently so basically with 2 different gateways. we tried with all the routes,rules etc but only on one vlan we are able to ping 8.8.8.8 for instance. Any suggestions/ideas? Cheers -- */Alfredo*

4 4

CentOS-announce Digest, Vol 184, Issue 7
by centos-announce-request＠centos.org 17 Jun '20

17 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2020:2549 Moderate CentOS 7 libexif Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Jun 2020 18:32:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2549 Moderate CentOS 7 libexif Security Update Message-ID: <20200616183209.GA23840(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2549 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:2549 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ff151ff0d06a3a237f4112e81dd69cb30bdd207c1ce2eeb5c88d405e20445e69 libexif-0.6.21-7.el7_8.i686.rpm 4ca77ed3d5488bddf31a813f9371f5487353f38a4d4fe7b38be4b46694f3e848 libexif-0.6.21-7.el7_8.x86_64.rpm 73a55735154caaf123f7c2629028bca3814feea738608d640925ec8547daedd0 libexif-devel-0.6.21-7.el7_8.i686.rpm 186ce67dec961f8d780c8d13e7155bc248bcc8287aa243db6203a96edec4350b libexif-devel-0.6.21-7.el7_8.x86_64.rpm d3c72ed4324f614b0ed32dfcae0b76adb75317301ed01a759168c17e6c4f9427 libexif-doc-0.6.21-7.el7_8.x86_64.rpm Source: 9740fa364a4cb8a7ee5f1dedb9cc96917b316acbc157374e3f8c8bcab9ed354e libexif-0.6.21-7.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 7 ***********************************************

1 0

LUKS layer / best practice
by Leon Fauster 17 Jun '20

17 Jun '20

Hi all, with regard to LUKS; should it placed before LVM or after? Any recommendations? TRIM command fully supported through all layers etc? -- Leon

3 3

Re: [CentOS] firewall help request
by david 16 Jun '20

16 Jun '20

At 12:30 PM 6/16/2020, John Pierce wrote: >On Tue, Jun 16, 2020 at 12:26 PM david <david(a)daku.org> wrote: > > > > > Examples of what I've tried, and then tested. None of them stopped > > an outgoing SSH from an internal system. > > > > iptables -I INPUT -p tcp --dport 22 -s 10.0.0.0/24 -j DROP > > iptables -I INPUT -p tcp --dport 22 -s 10.0.0.0/24 -j DROP > > > > > > >which interface is that bound to? I don't see a -i eth0 or whatever, but >you want that rule on your LAN interface. > >note these rules will also prevent any host on 10.0.0.0/24 from ssh'ing to >the gateway machine itself. At your suggestion, the command became iptables -I INPUT -p tcp --dport 22 -i enp3s0 -s 10.0.0.0/24 -j DROP where enp3s0 is the internal NIC with address 10.0.0.1. I'm assuming that your advice about LAN represents the internal network because on most routers, it is, and WAN is the internet connection. And ssh worked :-( unfortunately I know that many ISPs block outgoing port 25, so I know this is do-able. David

2 1

Missing Quote from latest Update
by Natassia S 16 Jun '20

16 Jun '20

Received these error message during update 16Jun2020. Running scriptlet: kmod-kvdo-6.2.1.138-58.el8_1.x86_64 750/1181 /etc/sysconfig/network-scripts/ifcfg-eno1: line 21: unexpected EOF while looking for matching `"' /etc/sysconfig/network-scripts/ifcfg-eno1: line 22: syntax error: unexpected end of file /etc/sysconfig/network-scripts/ifcfg-eno1: line 21: unexpected EOF while looking for matching `"' /etc/sysconfig/network-scripts/ifcfg-eno1: line 22: syntax error: unexpected end of file /etc/sysconfig/network-scripts/ifcfg-eno1: line 21: unexpected EOF while looking for matching `"' /etc/sysconfig/network-scripts/ifcfg-eno1: line 22: syntax error: unexpected end of file /etc/sysconfig/network-scripts/ifcfg-eno1: line 21: unexpected EOF while looking for matching `"' /etc/sysconfig/network-scripts/ifcfg-eno1: line 22: syntax error: unexpected end of file Natassia S. -- Software updates are like hand-washing for computers. So simple that it doesn't seem like it could make much of a difference, but it does.

2 2

Upgrade to 8.2 from 7.8
by Jerry Geis 16 Jun '20

16 Jun '20

So now that 8 is out - is it still "frowned" upon to do that in place update ? Is that not a good / valid solution ? Thanks, Jerry

3 2

Simple scan in CentOS 7
by H 16 Jun '20

16 Jun '20

I just installed C7 on a new computer and despite Simple Scan being installed as part of C7, I have not been able to get it to recognize my Canon scanner connected to a USB port. I did have it running on another computer with C7 so there should not be any inherent issues. On a lark I installed gscan2pdf and sane-backends-drivers-scanners and sane-find-scanner found it: found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at libusb:001:010 I perused my notes for the old computer but did not see I installed any additional software to get it going but I might be wrong. What have I missed? Thank you.

3 5

iwlwifi problem after Centos 8.2 update
by Georgios 16 Jun '20

16 Jun '20

Hi! I get high cpu usage on my laptop (yes im running Centos on my laptop) after my last update. At the beginning i though it was libvrtd but after stopping it gnome monitor keep showing high cpu usage although i couldnt find the app that was responsible for it with the top command. I searched my log files and I saw alot of iwlwifi message. I had to turn off wifi in order to stop high cpu usage. Any ideas how to solve it? Thanks in advance! dmesg command gives me the following output: 649.668600] RSP: 002b:00007fffaa691d60 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 649.668602] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 649.668603] RDX: 0000000000000000 RSI: 00007fffaa691db0 RDI: 000000000000000e [ 649.668604] RBP: 00007fffaa691db0 R08: 0000000000000000 R09: 0000000000000000 [ 649.668605] R10: 0000000000000012 R11: 0000000000000293 R12: 0000000000000000 [ 649.668605] R13: 0000000000000000 R14: 00007fffaa691f68 R15: 00007fffaa691f5c [ 649.756674] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM [ 649.756676] iwlwifi 0000:00:14.3: Found debug configuration: 0 [ 649.757247] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm [ 649.757275] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318 [ 649.765604] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 649.765843] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor. [ 649.806204] iwlwifi 0000:00:14.3: base HW address: a0:a4:c5:dd:0c:52 [ 649.852141] ieee80211 phy644: Selected rate control algorithm 'iwl- mvm-rs' [ 649.853603] thermal thermal_zone8: failed to read out thermal zone (-61) [ 649.860442] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 649.881196] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 649.887951] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 649.977952] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.042990] iwlwifi 0000:00:14.3: FW already configured (0) - re- configuring [ 650.050559] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 650.250610] iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0. [ 650.250685] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.250686] iwlwifi 0000:00:14.3: Status: 0x00000040, count: 6 [ 650.250687] iwlwifi 0000:00:14.3: Loaded firmware version: 46.6bf1df06.0 [ 650.250688] iwlwifi 0000:00:14.3: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL [ 650.250689] iwlwifi 0000:00:14.3: 0x00A0A2B1 | trm_hw_status0 [ 650.250690] iwlwifi 0000:00:14.3: 0x00000000 | trm_hw_status1 [ 650.250690] iwlwifi 0000:00:14.3: 0x004882DA | branchlink2 [ 650.250691] iwlwifi 0000:00:14.3: 0x0047932A | interruptlink1 [ 650.250692] iwlwifi 0000:00:14.3: 0x0000B0D0 | interruptlink2 [ 650.250692] iwlwifi 0000:00:14.3: 0x0001A83E | data1 [ 650.250693] iwlwifi 0000:00:14.3: 0x00001000 | data2 [ 650.250694] iwlwifi 0000:00:14.3: 0xF0000008 | data3 [ 650.250695] iwlwifi 0000:00:14.3: 0x00000000 | beacon time [ 650.250695] iwlwifi 0000:00:14.3: 0x00038F74 | tsf low [ 650.250696] iwlwifi 0000:00:14.3: 0x00000000 | tsf hi [ 650.250697] iwlwifi 0000:00:14.3: 0x00000000 | time gp1 [ 650.250697] iwlwifi 0000:00:14.3: 0x00038F75 | time gp2 [ 650.250698] iwlwifi 0000:00:14.3: 0x00000001 | uCode revision type [ 650.250699] iwlwifi 0000:00:14.3: 0x0000002E | uCode version major [ 650.250700] iwlwifi 0000:00:14.3: 0x6BF1DF06 | uCode version minor [ 650.250700] iwlwifi 0000:00:14.3: 0x00000312 | hw version [ 650.250701] iwlwifi 0000:00:14.3: 0x18C89008 | board version [ 650.250702] iwlwifi 0000:00:14.3: 0x001E0177 | hcmd [ 650.250702] iwlwifi 0000:00:14.3: 0x20122080 | isr0 [ 650.250703] iwlwifi 0000:00:14.3: 0x00000000 | isr1 [ 650.250704] iwlwifi 0000:00:14.3: 0x08001802 | isr2 [ 650.250704] iwlwifi 0000:00:14.3: 0x404001C0 | isr3 [ 650.250705] iwlwifi 0000:00:14.3: 0x00000000 | isr4 [ 650.250706] iwlwifi 0000:00:14.3: 0x001E0177 | last cmd Id [ 650.250707] iwlwifi 0000:00:14.3: 0x0001A83E | wait_event [ 650.250707] iwlwifi 0000:00:14.3: 0x00000000 | l2p_control [ 650.250708] iwlwifi 0000:00:14.3: 0x00010820 | l2p_duration [ 650.250709] iwlwifi 0000:00:14.3: 0x00000000 | l2p_mhvalid [ 650.250709] iwlwifi 0000:00:14.3: 0x00000000 | l2p_addr_match [ 650.250710] iwlwifi 0000:00:14.3: 0x0000000D | lmpm_pmg_sel [ 650.250711] iwlwifi 0000:00:14.3: 0x08081425 | timestamp [ 650.250711] iwlwifi 0000:00:14.3: 0x0000183C | flow_handler [ 650.250744] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.250744] iwlwifi 0000:00:14.3: Status: 0x00000040, count: 7 [ 650.250746] iwlwifi 0000:00:14.3: 0x20000034 | NMI_INTERRUPT_WDG [ 650.250746] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1 [ 650.250747] iwlwifi 0000:00:14.3: 0xC008885E | umac branchlink2 [ 650.250748] iwlwifi 0000:00:14.3: 0x80454D04 | umac interruptlink1 [ 650.250748] iwlwifi 0000:00:14.3: 0xC00842AC | umac interruptlink2 [ 650.250749] iwlwifi 0000:00:14.3: 0x00000400 | umac data1 [ 650.250750] iwlwifi 0000:00:14.3: 0xC00842AC | umac data2 [ 650.250751] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3 [ 650.250751] iwlwifi 0000:00:14.3: 0x0000002E | umac major [ 650.250752] iwlwifi 0000:00:14.3: 0x6BF1DF06 | umac minor [ 650.250753] iwlwifi 0000:00:14.3: 0x00038F5B | frame pointer [ 650.250753] iwlwifi 0000:00:14.3: 0xC0886B5C | stack pointer [ 650.250754] iwlwifi 0000:00:14.3: 0x001F010C | last host cmd [ 650.250755] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg [ 650.250772] iwlwifi 0000:00:14.3: Fseq Registers: [ 650.250780] iwlwifi 0000:00:14.3: 0x5CAAF71A | FSEQ_ERROR_CODE [ 650.250788] iwlwifi 0000:00:14.3: 0x00000000 | FSEQ_TOP_INIT_VERSION [ 650.250796] iwlwifi 0000:00:14.3: 0x48E767D9 | FSEQ_CNVIO_INIT_VERSION [ 650.250805] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION [ 650.250813] iwlwifi 0000:00:14.3: 0xBDFB20C4 | FSEQ_TOP_CONTENT_VERSION [ 650.250821] iwlwifi 0000:00:14.3: 0xC098A1DF | FSEQ_ALIVE_TOKEN [ 650.250830] iwlwifi 0000:00:14.3: 0x247AF0C2 | FSEQ_CNVI_ID [ 650.250838] iwlwifi 0000:00:14.3: 0x3AE78660 | FSEQ_CNVR_ID [ 650.250846] iwlwifi 0000:00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP [ 650.250876] iwlwifi 0000:00:14.3: 0x00000201 | CNVR_AUX_MISC_CHIP [ 650.250887] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM [ 650.250944] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR [ 650.250980] iwlwifi 0000:00:14.3: Collecting data: trigger 2 fired. [ 650.250983] ieee80211 phy644: Hardware restart was requested [ 650.251019] iwlwifi 0000:00:14.3: iwlwifi transaction failed, dumping registers [ 650.251021] iwlwifi 0000:00:14.3: iwlwifi device config registers: [ 650.251197] iwlwifi 0000:00:14.3: 00000000: 9df08086 00100406 02800030 00800010 a131c004 00000000 00000000 00000000 [ 650.251198] iwlwifi 0000:00:14.3: 00000020: 00000000 00000000 00000000 42a48086 00000000 000000c8 00000000 0000010b [ 650.251199] iwlwifi 0000:00:14.3: 00000040: 00928010 10000ec0 00100c10 00000000 00000000 00000000 00000000 00000000 [ 650.251201] iwlwifi 0000:00:14.3: 00000060: 00000000 00080812 00000405 00000000 00000000 00000000 00000000 00000000 [ 650.251202] iwlwifi 0000:00:14.3: 00000080: 800f0011 00002000 00003000 00000000 00000000 00000000 00000000 00000000 [ 650.251203] iwlwifi 0000:00:14.3: 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251204] iwlwifi 0000:00:14.3: 000000c0: 00000000 00000000 c823d001 0d000008 00804005 00000000 00000000 00000000 [ 650.251205] iwlwifi 0000:00:14.3: 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251206] iwlwifi 0000:00:14.3: 00000100: 14c00000 ff000000 000000ff 00462031 00000000 00002000 00000000 00000000 [ 650.251207] iwlwifi 0000:00:14.3: 00000120: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251208] iwlwifi 0000:00:14.3: 00000140: 00000000 00000000 00000000 16410018 00000000 0001001e 00481e1f 00000000 [ 650.251209] iwlwifi 0000:00:14.3: iwlwifi device memory mapped registers: [ 650.251251] iwlwifi 0000:00:14.3: 00000000: 18c89008 00000040 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251252] iwlwifi 0000:00:14.3: 00000020: 00000000 0c040005 00000312 d55555d5 d55555d5 d55555d5 80008040 041f0040 [ 650.251260] iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD [ 650.251262] CPU: 0 PID: 1437 Comm: NetworkManager Kdump: loaded Not tainted 4.18.0-193.6.3.el8_2.x86_64 #1 [ 650.251263] Hardware name: Dell Inc. Vostro 5481/0PK27Y, BIOS 1.0.0 09/05/2018 [ 650.251263] Call Trace: [ 650.251268] dump_stack+0x5c/0x80 [ 650.251274] iwl_trans_pcie_send_hcmd+0x370/0x380 [iwlwifi] [ 650.251278] ? finish_wait+0x80/0x80 [ 650.251282] iwl_trans_send_cmd+0x5b/0xc0 [iwlwifi] [ 650.251288] iwl_mvm_send_cmd+0x1b/0x40 [iwlmvm] [ 650.251292] iwl_mvm_legacy_config_scan+0x274/0x440 [iwlmvm] [ 650.251297] iwl_mvm_config_scan+0xec/0x100 [iwlmvm] [ 650.251300] iwl_mvm_up+0x89a/0xa60 [iwlmvm] [ 650.251303] __iwl_mvm_mac_start+0x26/0x1d0 [iwlmvm] [ 650.251306] iwl_mvm_mac_start+0x23/0x40 [iwlmvm] [ 650.251318] drv_start+0x43/0x100 [mac80211] [ 650.251327] ieee80211_do_open+0x251/0x900 [mac80211] [ 650.251330] __dev_open+0xcd/0x160 [ 650.251331] __dev_change_flags+0x1ad/0x220 [ 650.251332] dev_change_flags+0x21/0x60 [ 650.251333] do_setlink+0x314/0xe90 [ 650.251334] ? update_curr+0x70/0x1c0 [ 650.251335] ? cpumask_next_and+0x1a/0x20 [ 650.251337] ? __nla_validate_parse+0x51/0x840 [ 650.251338] ? cpumask_next+0x17/0x20 [ 650.251340] ? __snmp6_fill_stats64.isra.56+0x6b/0x110 [ 650.251340] ? __nla_validate_parse+0x51/0x840 [ 650.251341] __rtnl_newlink+0x53d/0x890 [ 650.251343] ? __nla_reserve+0x38/0x50 [ 650.251345] ? security_sock_rcv_skb+0x2a/0x40 [ 650.251346] ? sk_filter_trim_cap+0x49/0x230 [ 650.251348] ? netlink_attachskb+0x1b0/0x1e0 [ 650.251349] ? skb_queue_tail+0x1b/0x50 [ 650.251351] ? __netlink_sendskb+0x51/0x70 [ 650.251354] ? _cond_resched+0x15/0x30 [ 650.251356] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 650.251357] rtnl_newlink+0x43/0x60 [ 650.251358] rtnetlink_rcv_msg+0x200/0x2f0 [ 650.251359] ? rtnl_calcit.isra.35+0x110/0x110 [ 650.251360] netlink_rcv_skb+0x4c/0x120 [ 650.251362] netlink_unicast+0x19e/0x260 [ 650.251363] netlink_sendmsg+0x204/0x3d0 [ 650.251365] sock_sendmsg+0x4c/0x50 [ 650.251366] ___sys_sendmsg+0x29f/0x300 [ 650.251367] ? copy_overflow+0x20/0x20 [ 650.251368] ? __rtnl_unlock+0x25/0x50 [ 650.251369] ? netdev_run_todo+0x5e/0x290 [ 650.251370] ? addrconf_sysctl_forward+0x113/0x250 [ 650.251372] __sys_sendmsg+0x57/0xa0 [ 650.251374] do_syscall_64+0x5b/0x1a0 [ 650.251375] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 650.251376] RIP: 0033:0x7f21aecdeb07 [ 650.251378] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 [ 650.251378] RSP: 002b:00007fffaa692040 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 650.251379] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 650.251380] RDX: 0000000000000000 RSI: 00007fffaa692090 RDI: 000000000000000e [ 650.251380] RBP: 00007fffaa692090 R08: 0000000000000000 R09: 0000000000000000 [ 650.251381] R10: 0000000000000002 R11: 0000000000000293 R12: 0000000000000000 [ 650.251381] R13: 0000000000000000 R14: 00007fffaa692248 R15: 00007fffaa69223c [ 650.251384] iwlwifi 0000:00:14.3: Firmware not running - cannot dump error [ 650.271000] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.362380] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.427431] iwlwifi 0000:00:14.3: FW already configured (0) - re- configuring [ 650.436705] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 650.636708] iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0. [ 650.636788] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.636792] iwlwifi 0000:00:14.3: Status: 0x00000050, count: 6 [ 650.636796] iwlwifi 0000:00:14.3: Loaded firmware version: 46.6bf1df06.0 [ 650.636801] iwlwifi 0000:00:14.3: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL [ 650.636804] iwlwifi 0000:00:14.3: 0x00A0A2F1 | trm_hw_status0 [ 650.636807] iwlwifi 0000:00:14.3: 0x00000000 | trm_hw_status1 [ 650.636810] iwlwifi 0000:00:14.3: 0x004882DA | branchlink2 [ 650.636813] iwlwifi 0000:00:14.3: 0x0047932A | interruptlink1 [ 650.636816] iwlwifi 0000:00:14.3: 0x0000B0D0 | interruptlink2 [ 650.636819] iwlwifi 0000:00:14.3: 0x0001A83E | data1 [ 650.636822] iwlwifi 0000:00:14.3: 0x00001000 | data2 [ 650.636825] iwlwifi 0000:00:14.3: 0xF0000008 | data3 [ 650.636828] iwlwifi 0000:00:14.3: 0x00000000 | beacon time [ 650.636831] iwlwifi 0000:00:14.3: 0x000395B6 | tsf low [ 650.636834] iwlwifi 0000:00:14.3: 0x00000000 | tsf hi [ 650.636837] iwlwifi 0000:00:14.3: 0x00000000 | time gp1 [ 650.636840] iwlwifi 0000:00:14.3: 0x000395B6 | time gp2 [ 650.636860] iwlwifi 0000:00:14.3: 0x00000001 | uCode revision type [ 650.636863] iwlwifi 0000:00:14.3: 0x0000002E | uCode version major [ 650.636866] iwlwifi 0000:00:14.3: 0x6BF1DF06 | uCode version minor [ 650.636869] iwlwifi 0000:00:14.3: 0x00000312 | hw version [ 650.636872] iwlwifi 0000:00:14.3: 0x18C89008 | board version [ 650.636875] iwlwifi 0000:00:14.3: 0x001D0177 | hcmd [ 650.636878] iwlwifi 0000:00:14.3: 0x20122080 | isr0 [ 650.636881] iwlwifi 0000:00:14.3: 0x00000000 | isr1 [ 650.636884] iwlwifi 0000:00:14.3: 0x08001802 | isr2 [ 650.636887] iwlwifi 0000:00:14.3: 0x404001C0 | isr3 [ 650.636889] iwlwifi 0000:00:14.3: 0x00000000 | isr4 [ 650.636892] iwlwifi 0000:00:14.3: 0x001D0177 | last cmd Id [ 650.636895] iwlwifi 0000:00:14.3: 0x0001A83E | wait_event [ 650.636898] iwlwifi 0000:00:14.3: 0x00000000 | l2p_control [ 650.636901] iwlwifi 0000:00:14.3: 0x00000820 | l2p_duration [ 650.636904] iwlwifi 0000:00:14.3: 0x00000000 | l2p_mhvalid [ 650.636907] iwlwifi 0000:00:14.3: 0x00000000 | l2p_addr_match [ 650.636910] iwlwifi 0000:00:14.3: 0x0000000D | lmpm_pmg_sel [ 650.636913] iwlwifi 0000:00:14.3: 0x08081425 | timestamp [ 650.636916] iwlwifi 0000:00:14.3: 0x0000183C | flow_handler [ 650.636953] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.636956] iwlwifi 0000:00:14.3: Status: 0x00000050, count: 7 [ 650.636959] iwlwifi 0000:00:14.3: 0x20000034 | NMI_INTERRUPT_WDG [ 650.636962] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1 [ 650.636965] iwlwifi 0000:00:14.3: 0xC008885E | umac branchlink2 [ 650.636968] iwlwifi 0000:00:14.3: 0x80454D04 | umac interruptlink1 [ 650.636971] iwlwifi 0000:00:14.3: 0xC00842AC | umac interruptlink2 [ 650.636974] iwlwifi 0000:00:14.3: 0x00000400 | umac data1 [ 650.636977] iwlwifi 0000:00:14.3: 0xC00842AC | umac data2 [ 650.636980] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3 [ 650.636983] iwlwifi 0000:00:14.3: 0x0000002E | umac major [ 650.636986] iwlwifi 0000:00:14.3: 0x6BF1DF06 | umac minor [ 650.636989] iwlwifi 0000:00:14.3: 0x0003959E | frame pointer [ 650.636992] iwlwifi 0000:00:14.3: 0xC0886B5C | stack pointer [ 650.636995] iwlwifi 0000:00:14.3: 0x001E010C | last host cmd [ 650.636998] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg [ 650.637017] iwlwifi 0000:00:14.3: Fseq Registers: [ 650.637025] iwlwifi 0000:00:14.3: 0x5CAAF71A | FSEQ_ERROR_CODE [ 650.637034] iwlwifi 0000:00:14.3: 0x00000000 | FSEQ_TOP_INIT_VERSION [ 650.637042] iwlwifi 0000:00:14.3: 0x48E767D9 | FSEQ_CNVIO_INIT_VERSION [ 650.637051] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION [ 650.637060] iwlwifi 0000:00:14.3: 0xBDFB20C4 | FSEQ_TOP_CONTENT_VERSION [ 650.637068] iwlwifi 0000:00:14.3: 0xC098A1DF | FSEQ_ALIVE_TOKEN [ 650.637077] iwlwifi 0000:00:14.3: 0x247AF0C2 | FSEQ_CNVI_ID [ 650.637085] iwlwifi 0000:00:14.3: 0x3AE78660 | FSEQ_CNVR_ID [ 650.637094] iwlwifi 0000:00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP [ 650.637105] iwlwifi 0000:00:14.3: 0x00000201 | CNVR_AUX_MISC_CHIP [ 650.637115] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM [ 650.637157] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR [ 650.637166] iwlwifi 0000:00:14.3: Firmware error during reconfiguration - reprobe! [ 650.637199] iwlwifi 0000:00:14.3: LED command failed: -5 [ 650.637219] iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD [ 650.637240] CPU: 3 PID: 1437 Comm: NetworkManager Kdump: loaded Not tainted 4.18.0-193.6.3.el8_2.x86_64 #1 [ 650.637241] iwlwifi 0000:00:14.3: LED command failed: -5 [ 650.637244] Hardware name: Dell Inc. Vostro 5481/0PK27Y, BIOS 1.0.0 09/05/2018 [ 650.637245] Call Trace: [ 650.637256] dump_stack+0x5c/0x80 [ 650.637275] iwl_trans_pcie_send_hcmd+0x370/0x380 [iwlwifi] [ 650.637284] ? finish_wait+0x80/0x80 [ 650.637300] iwl_trans_send_cmd+0x5b/0xc0 [iwlwifi] [ 650.637318] iwl_mvm_send_cmd+0x1b/0x40 [iwlmvm] [ 650.637337] iwl_mvm_legacy_config_scan+0x274/0x440 [iwlmvm] [ 650.637353] iwl_mvm_config_scan+0xec/0x100 [iwlmvm] [ 650.637366] iwl_mvm_up+0x89a/0xa60 [iwlmvm] [ 650.637379] __iwl_mvm_mac_start+0x26/0x1d0 [iwlmvm] [ 650.637391] iwl_mvm_mac_start+0x23/0x40 [iwlmvm] [ 650.637423] drv_start+0x43/0x100 [mac80211] [ 650.637460] ieee80211_do_open+0x251/0x900 [mac80211] [ 650.637466] __dev_open+0xcd/0x160 [ 650.637471] __dev_change_flags+0x1ad/0x220 [ 650.637475] dev_change_flags+0x21/0x60 [ 650.637480] do_setlink+0x314/0xe90 [ 650.637484] ? update_curr+0x70/0x1c0 [ 650.637489] ? cpumask_next_and+0x1a/0x20 [ 650.637493] ? __nla_validate_parse+0x51/0x840 [ 650.637497] ? cpumask_next+0x17/0x20 [ 650.637502] ? __snmp6_fill_stats64.isra.56+0x6b/0x110 [ 650.637505] ? __nla_validate_parse+0x51/0x840 [ 650.637510] __rtnl_newlink+0x53d/0x890 [ 650.637515] ? __nla_reserve+0x38/0x50 [ 650.637521] ? security_sock_rcv_skb+0x2a/0x40 [ 650.637527] ? sk_filter_trim_cap+0x49/0x230 [ 650.637533] ? netlink_attachskb+0x1b0/0x1e0 [ 650.637537] ? skb_queue_tail+0x1b/0x50 [ 650.637541] ? __netlink_sendskb+0x51/0x70 [ 650.637553] ? filename_lookup.part.63+0xd3/0x170 [ 650.637559] ? _cond_resched+0x15/0x30 [ 650.637563] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 650.637568] rtnl_newlink+0x43/0x60 [ 650.637572] rtnetlink_rcv_msg+0x200/0x2f0 [ 650.637576] ? rtnl_calcit.isra.35+0x110/0x110 [ 650.637581] netlink_rcv_skb+0x4c/0x120 [ 650.637587] netlink_unicast+0x19e/0x260 [ 650.637593] netlink_sendmsg+0x204/0x3d0 [ 650.637598] sock_sendmsg+0x4c/0x50 [ 650.637602] ___sys_sendmsg+0x29f/0x300 [ 650.637608] ? try_to_wake_up+0x54/0x570 [ 650.637613] ? __check_object_size+0xa8/0x16b [ 650.637617] ? wake_up_q+0x70/0x70 [ 650.637623] ? __wake_up_common+0x7a/0x190 [ 650.637629] __sys_sendmsg+0x57/0xa0 [ 650.637635] do_syscall_64+0x5b/0x1a0 [ 650.637640] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 650.637644] RIP: 0033:0x7f21aecdeb07 [ 650.637649] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 [ 650.637651] RSP: 002b:00007fffaa691d60 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 650.637655] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 650.637657] RDX: 0000000000000000 RSI: 00007fffaa691db0 RDI: 000000000000000e [ 650.637658] RBP: 00007fffaa691db0 R08: 0000000000000000 R09: 0000000000000000 [ 650.637660] R10: 0000000000000012 R11: 0000000000000293 R12: 0000000000000000 [ 650.637662] R13: 0000000000000000 R14: 00007fffaa691f68 R15: 00007fffaa691f5c [ 650.722207] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM [ 650.722209] iwlwifi 0000:00:14.3: Found debug configuration: 0 [ 650.722634] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm [ 650.722653] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318 [ 650.729579] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.729914] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor. [ 650.770224] iwlwifi 0000:00:14.3: base HW address: a0:a4:c5:dd:0c:52 [ 650.814071] ieee80211 phy645: Selected rate control algorithm 'iwl- mvm-rs' [ 650.822074] thermal thermal_zone8: failed to read out thermal zone (-61) [ 650.835672] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 650.850976] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready

1 0

CentOS-announce Digest, Vol 184, Issue 6
by centos-announce-request＠centos.org 16 Jun '20

16 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS Linux 8 (2004) (Brian Stinson) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Jun 2020 11:29:32 -0500 From: Brian Stinson <bstinson(a)centosproject.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] Release for CentOS Linux 8 (2004) Message-ID: <1491307c-4a76-1bc2-7375-9c85cdff3214(a)centosproject.org> Content-Type: text/plain; charset=utf-8 Release for CentOS Linux 8 (2004) We are pleased to announce the general availability of CentOS Linux 8. Effectively immediately, this is the current release for CentOS Linux 8 and is tagged as 2004, derived from Red Hat Enterprise Linux 8.2 Source Code. As always, read through the Release Notes at : http://wiki.centos.org/Manuals/ReleaseNotes/CentOS8.2004? - these notes contain important information about the release and details about some of the content inside the release from the CentOS QA team. These notes are updated constantly to include issues and incorporate feedback from the users. ---------- Updates, Sources, and DebugInfos Updates released since the upstream release are all posted, across all architectures. We strongly recommend every user apply all updates, including the content released today, on your existing CentOS Linux 8 machine by just running 'dnf update'. As with all CentOS Linux 8 components, this release was built from sources hosted at git.centos.org. Sources will be available from vault.centos.org in their own dedicated directories to match the corresponding binary RPMs. Since there is far less traffic to the CentOS source RPMs compared with the binary RPMs, we are not putting this content on the main mirror network. If users wish to mirror this content they can do so using the reposync command available in the yum/dnf-utils package. All CentOS source RPMs are signed with the same key used to sign their binary counterparts. Developers and end users looking at inspecting and contributing patches to the CentOS Linux distro will find the code hosted at git.centos.org far simpler to work against. Details on how to best consume those are documented along with a quick start at : http://wiki.centos.org/Sources Debuginfo packages have been signed and pushed. Yum configs shipped in the new release file will have all the context required for debuginfo to be available on every CentOS Linux install. This release supersedes all previously released content for CentOS Linux 8, and therefore we highly encourage all users to upgrade their machines. Information on different upgrade strategies and how to handle stale content is included in the Release Notes. Note that older content, obsoleted by newer versions of the same applications are trim'd off from repos like extras/ and centosplus/ ---------- Download We produced the following installer images for CentOS Linux 8 # CentOS-8.2.2004-x86_64-minimal.iso: 1718616064 bytes SHA256 (CentOS-8.2.2004-x86_64-minimal.iso) = 47ab14778c823acae2ee6d365d76a9aed3f95bb8d0add23a06536b58bb5293c0 # CentOS-8.2.2004-x86_64-boot.iso: 654311424 bytes SHA256 (CentOS-8.2.2004-x86_64-boot.iso) = c67876a5602faa17f68b40ccf2628799b87454aa67700f0f57eec15c6ccdd98c # CentOS-8.2.2004-x86_64-dvd1.iso: 8231321600 bytes SHA256 (CentOS-8.2.2004-x86_64-dvd1.iso) = c87a2d81d67bbaeaf646aea5bedd70990078ec252fc52f5a7d65ff609871e255 # CentOS-8.2.2004-aarch64-minimal.iso: 1410226176 bytes SHA256 (CentOS-8.2.2004-aarch64-minimal.iso) = 621d08902bfd7ca8437cd536b86631c87ddc3e36a530abc77011d230401eb158 # CentOS-8.2.2004-aarch64-boot.iso: 579823616 bytes SHA256 (CentOS-8.2.2004-aarch64-boot.iso) = 76a9a5f84ac9581fee079d7154bf68f72661c9d941e9ab3143bccc760c23eecc # CentOS-8.2.2004-aarch64-dvd1.iso: 5988872192 bytes SHA256 (CentOS-8.2.2004-aarch64-dvd1.iso) = 9d2f066edfc3820fc9e4c6d52f01489a3ed57515cf608773e2b8a04f1903c838 # CentOS-8.2.2004-ppc64le-minimal.iso: 1493422080 bytes SHA256 (CentOS-8.2.2004-ppc64le-minimal.iso) = 1d6802ce5581bd6ae22d13e491dfad65b7a32166f1484e8d6c532cd4cd7e18db # CentOS-8.2.2004-ppc64le-boot.iso: 628408320 bytes SHA256 (CentOS-8.2.2004-ppc64le-boot.iso) = a039bc592e416b97914b6c99cc8cb070d6b35742dbcb7b6eccff55291659c664 # CentOS-8.2.2004-ppc64le-dvd1.iso: 7080738816 bytes SHA256 (CentOS-8.2.2004-ppc64le-dvd1.iso) = 1a94eff60fd016ea8efb1d592eda85f0b5edde2ff2ad4c77db546ab90392421e Information for the torrent files and sums are available at http://mirror.centos.org/centos/8/isos/ -------- Additional Images Vagrant and Generic Cloud images are available at: http://cloud.centos.org/centos/8/ Amazon Machine Images for Amazon Web Services are published by ID into a number of regions. A table of AMI IDs can be found here: https://wiki.centos.org/Cloud/AWS ---------- Getting Help The CentOS ecosystem is sustained by community driven help and guidance. The best place to start for new users is at http://wiki.centos.org/GettingHelp We are also on social media, you can find the project: on Twitter at? :http://twitter.com/CentOSProject on Facebook at :https://www.facebook.com/groups/centosproject/ on LinkedIn at :https://www.linkedin.com/groups/22405 And you will find the core team and a majority of the contributors on irc, on freenode.net in #centos ; talking about the finer points of distribution engineering and platform enablement. ---------- Contributors This release was made possible due to the hard work of many people, foremost on that list are the Red Hat Engineers for producing a great distribution and the CentOS QA team, without them CentOS Linux would look very different. Many of the team went further and beyond expectations to bring this release to you, and I would like to thank everyone for their help. We are also looking for people to get involved with the QA process in CentOS, if you would like to join this please introduce yourself on the centos-devel list (http://lists.centos.org/mailman/listinfo/centos-devel? ). Finally, please join me in thanking the donors who all make this possible for us. Enjoy the fresh new release! Thanks, Brian Stinson ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 6 ***********************************************

1 0

smb protocol version
by Christopher Wensink 16 Jun '20

16 Jun '20

I have a handful of Linux Servers, running Centos 6.10, and 6.8 with the main host running openvz w/ Centos 6.10 as the main OS. Two of the guests are running samba, sharing directories out to windows clients. I'm in the process of migrating servers over to vmware, using Centos 7.8. How can I determine what smb protocol version is being used in the shares for each server? I don't see the protocol specified anywhere in smb.conf? Chris

4 4

Re: [CentOS] C8 install problems SOLVED
by ejm 15 Jun '20

15 Jun '20

I burned a total of 7.55Gb from an ISO image to a dual-layer HP DVD+R disc. I got a bootable USB stick containing 8.1 and it's 7.65 Gb so apparently my ISO image file is messed up. I was able to install C8 just fine from the USB stick, so marking this as solved. Thanks, --Ed

1 0

/etc/networks file
by Jay Hart 15 Jun '20

15 Jun '20

I am having some network connectivity issues that manifest itself through ping, wget, dnf, etc. The symptoms are intermittent ability to ping, was wget, or connect to repositories. Where this inquiry is going is: If your internal network is using 192.168.1 or 10..50.10, what should be in /etc/networks. My current file contains: default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 And I'm pretty sure this is the default OS installed contents. I don't think this is related to my connectivity issue, just curious about what this file does. My old server (which is working just fine) has the same content in its /etc/networks file so not configuring this does not seem to matter one way or the other. If one were using 192.168.1.x network , assume 'default' should be 192.168.1.0. 'Link-local' should match??? Thanks, Jay

4 4

halt versus shutdown
by Leon Fauster 15 Jun '20

15 Jun '20

Working with different OSs can be quite challenging (mentally :-)). I wonder why the command "halt" has not same result between EL6 and EL8. To shutdown the vm or workstation in EL8 i must use "shutdown now". Who mandates this behavior in terms of configuration file? -- Leon

6 10

Modifying username
by Jay Hart 15 Jun '20

15 Jun '20

I modified a users name on my system. From ABCLast, to ALast (used as an example). I modified the username, then the group name of the user (to align with the new name), and then I moved the users home directory from /home/ABCLast, to /home/ALast. Then using vipw, edited the home directory to use /home/ALast. When I got finished editing the passwd file, I got the following message: You have modified /etc/passwd. You may need to modify /etc/shadow for consistency. I don't know what to do here. Need some guidance please. lastly, did I miss anything here? Any other steps I need to do to get this user squared away due to the name change? Thanks, Jay

6 7

pppoe
by Joe 12 Jun '20

12 Jun '20

Hello, CentOS 8 dropped the rp-pppoe package. My attempts with NetworkManager-ppp already failed because it seems that it is not possible to use a VLAN as a device. Please, how does it work under C8 to set up a pppoe connection (German Telekom, VDSL (VLAN 7 required), ZTE modem). Thanks. Joe

2 1

Minicom and Ncurses
by Nicolas Kovacs 12 Jun '20

12 Jun '20

Hi, I have to do some maintenance on a CentOS 7 proxy installed on a routerboard without a video card. The only way to access this machine directly is via Minicom and serial port. I'm using NetworkManager TUI (nmtui) to configure network interfaces, but Ncurses rendering in Minicom works in the sense that chickens fly and horses swim. What you get is a forest of question marks with a few barely recognizable options lost in between. Is there some magical trick to render Ncurses interfaces correctly in Minicom ? Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Blog : https://blog.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

4 4

CentOS-announce Digest, Vol 184, Issue 5
by centos-announce-request＠centos.org 12 Jun '20

12 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2020:2530 Important CentOS 7 tomcat Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 11 Jun 2020 21:13:08 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2530 Important CentOS 7 tomcat Security Update Message-ID: <20200611211308.GA14121(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2530 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2530 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 1a682ecdfdca8179b910e4ad1364c7ea7af6484572fa4c0bf786d78a32b2352f tomcat-7.0.76-12.el7_8.noarch.rpm 3fbf1ba29d42285e346eea1daf56195b30a3e94182dc36be98483cd12cbd21cc tomcat-admin-webapps-7.0.76-12.el7_8.noarch.rpm 0e0d2a192959f0e924276b1a404f1696e4c8f489e745d0f759efae4b2e712533 tomcat-docs-webapp-7.0.76-12.el7_8.noarch.rpm 150fbb8d578feb9baac913edd690284b9723f51a4ef734cb834bd87b19eb6110 tomcat-el-2.2-api-7.0.76-12.el7_8.noarch.rpm 919467bef774bb63bf51ec63c3758c1b0a98fed3d3ba41eaf9da630bc7e7932a tomcat-javadoc-7.0.76-12.el7_8.noarch.rpm 4119baf0bb201bf72b2e037b2df5af8a2f03d88341a41e6af7310429daded8f4 tomcat-jsp-2.2-api-7.0.76-12.el7_8.noarch.rpm 1c864d58ea8b2a77959443e02fd45cd9424414ac02881ae7db8fb1f7abee126c tomcat-jsvc-7.0.76-12.el7_8.noarch.rpm 6d203bb8a91bda83c4ec3973e3bc72f428675e7c3a0f33363e535c92f56c5395 tomcat-lib-7.0.76-12.el7_8.noarch.rpm b02d127bdaef8b0e305453b6bdf3479008875b1f574b172429d5ead159591733 tomcat-servlet-3.0-api-7.0.76-12.el7_8.noarch.rpm d307e0fd8ecc96b206c97fe1e7003080cfc6a4d5f90d73a4aecbafd14f48c023 tomcat-webapps-7.0.76-12.el7_8.noarch.rpm Source: d18613ee3eff59b1223761f5843b528d137200f7ee6e7d66e4dde770fb164115 tomcat-7.0.76-12.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 5 ***********************************************

1 0

CentOS-announce Digest, Vol 184, Issue 4
by centos-announce-request＠centos.org 11 Jun '20

11 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2020:2433 Moderate CentOS 6 microcode_ctl Security Update (Johnny Hughes) 2. CESA-2020:2430 Moderate CentOS 6 kernel Security Update (Johnny Hughes) 3. CESA-2020:2432 Moderate CentOS 7 microcode_ctl Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Jun 2020 17:17:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2433 Moderate CentOS 6 microcode_ctl Security Update Message-ID: <20200610171714.GA3446(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2433 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:2433 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bc2910c9f73fe13f75c2921410c368230698ad20c41c6bc8f2b077e875bc5ecb microcode_ctl-1.17-33.26.el6_10.i686.rpm x86_64: d61387797006fdb5af23de80a5751ff3769dbdbb53d89839809dc98359b58125 microcode_ctl-1.17-33.26.el6_10.x86_64.rpm Source: 29a7a32919a8d60ce03d01075170f32614032b89bd9bf8b3e46b76525018c082 microcode_ctl-1.17-33.26.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 10 Jun 2020 17:19:46 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2430 Moderate CentOS 6 kernel Security Update Message-ID: <20200610171946.GA3787(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2430 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:2430 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 11bf519a323e41b66b238dc14e924b0b5d3b6d637dc4d8f5e866a566545ea7f0 kernel-2.6.32-754.30.2.el6.i686.rpm 2502bbcf915834aae1634c2ece36bafb9a3348fef2b9232e147477d81874c853 kernel-abi-whitelists-2.6.32-754.30.2.el6.noarch.rpm 15f96d91bfc8fe4a00f5ec978233cbc05167bfe7734ec2c1b6ed071e68566406 kernel-debug-2.6.32-754.30.2.el6.i686.rpm e7e5ffa9c22ed9d43fcf4e98e08dafdd1be3a308824a60103843540a0b1456d5 kernel-debug-devel-2.6.32-754.30.2.el6.i686.rpm 4fff97920b1df19e4b2ae0af5e2a3f0cfca8853858e7c892bfbfe112507cb6b6 kernel-devel-2.6.32-754.30.2.el6.i686.rpm 921d611a19b98c2f04f9981edf3324b27b869f8a1d327adb60061ff71a912aaf kernel-doc-2.6.32-754.30.2.el6.noarch.rpm bf7722b27bd32467a52cf669295c683070fba5151ee297a33f7718dd7dd16107 kernel-firmware-2.6.32-754.30.2.el6.noarch.rpm a29ac2d4a39828bc7c5a18c9f728b0695b35d33ffb11c3dbcd8dc2b0f4621f21 kernel-headers-2.6.32-754.30.2.el6.i686.rpm 86a91237241b6d70a7ef40118609a192095ebc6867b6dde631eb935f6301d794 perf-2.6.32-754.30.2.el6.i686.rpm 54ab43ad2015f540fa658ea87ef5c7b7e24d411150aa1d58398be71af04d8c6e python-perf-2.6.32-754.30.2.el6.i686.rpm x86_64: 921bf8f31a14a20b2ae2c729af200cac547e18d5459bdf68c2fd13e76c08f83e kernel-2.6.32-754.30.2.el6.x86_64.rpm 2502bbcf915834aae1634c2ece36bafb9a3348fef2b9232e147477d81874c853 kernel-abi-whitelists-2.6.32-754.30.2.el6.noarch.rpm 2c3fe628af77d70d17d4df1f409e693dad07100ae1394473258422a785403cc4 kernel-debug-2.6.32-754.30.2.el6.x86_64.rpm e7e5ffa9c22ed9d43fcf4e98e08dafdd1be3a308824a60103843540a0b1456d5 kernel-debug-devel-2.6.32-754.30.2.el6.i686.rpm 403bc658ff35b9fafb243d94d6cf6fa028b2530b2c31164e776f4b1a95995679 kernel-debug-devel-2.6.32-754.30.2.el6.x86_64.rpm 22d0199606b0ffa91d4981ffeafe3bf14eddb4176ebd1afe76e01e2dac46806f kernel-devel-2.6.32-754.30.2.el6.x86_64.rpm 921d611a19b98c2f04f9981edf3324b27b869f8a1d327adb60061ff71a912aaf kernel-doc-2.6.32-754.30.2.el6.noarch.rpm bf7722b27bd32467a52cf669295c683070fba5151ee297a33f7718dd7dd16107 kernel-firmware-2.6.32-754.30.2.el6.noarch.rpm 59b69f6865b2598236fd7f1062321e8cfba8562f8f6f03533a88a0d1234d6543 kernel-headers-2.6.32-754.30.2.el6.x86_64.rpm fe5f89cc7d77d68ded0aea3d056408e5405b90b1ecaea31e174ad600e17ff7e0 perf-2.6.32-754.30.2.el6.x86_64.rpm 5439d7ca2bbf1686b75f1209436985aaee824e9c188359f5e5dae1c1b10183dd python-perf-2.6.32-754.30.2.el6.x86_64.rpm Source: b23d189769ca45756cbf8dac9fdfd11b507414a2c64f5e8973fd8540aa2ba211 kernel-2.6.32-754.30.2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 10 Jun 2020 17:22:53 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2432 Moderate CentOS 7 microcode_ctl Security Update Message-ID: <20200610172253.GA4100(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2432 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2020:2432 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e60f84fe58d8f960f14241fc1c21ad0053213bad8ba294fc3c5f727d37076e4c microcode_ctl-2.1-61.6.el7_8.x86_64.rpm Source: 42a0ea626d8554d7d25af8a383010f11fd791f7689f8943c7b97646db5550acc microcode_ctl-2.1-61.6.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 4 ***********************************************

1 0

virt-manager guest and sound
by Jerry Geis 10 Jun '20

10 Jun '20

I am running C7 host and pulse audio. I have a Win 10 guest with ICH9 audio. It works - but I hear artifacts. Anything to do to help audio be flawless under guest VM ? Currently I was just on youtube and playing a song. nothing special. Plenty of resources on the host. The guest has 8G ram and 8 CPU. Thanks Jerry

3 2

In CentOS 8 new install, old /home, .desktop opens in gedit
by Lamar Owen 10 Jun '20

10 Jun '20

Ok, hoping someone has seen this or at least knows where to look. I have been waiting around a bit to upgrade my system to CentOS 8, and actually wanted to wait on 8.2, but had an opportunity this week to actually do the work, so took the opportunity. Here was my process: 1.) Installed CentOS 8.1.1911 on a spare mSATA SSD in my spare M6700 laptop. Installed the RPMfusion nVidia drivers, the PowerTools repo, set up the extensions for Places, Applications, etc, and got it prepped to accept my /home disk. 2.) After complete backups, physically moved my /home disk from the CentOS 7 M6700 to the CentOS 8 M6700. /home is on a LUKS LVM lv; got all the mount options and encryption options setup to start on boot. All of that now works, even though it took a bit of wrangling (if the filesystem mount is set to start up at boot without the nofail option BUT the encryption option is left at the User Default setting, it will not work!). Did a complete SELinux relabel (touch /.autorelabel and reboot). Moved the default GNOME config dirs over to the old /home; don't want a lot of cruft left over from the C7 install (which has been upgraded over the years from C6, Fedora 14, and earlier, and it was time to get rid of some cruft, I'm sure). After booting back up with the old /home in place, verified the GNOME extensions settings I had set up after the new install. All looks good, and working like it's supposed to so far. 3.) Moved over the Win10 and Win7 virtual machines, all of that works fine. 4.) Started installing my everyday programs, beginning with Harrison Mixbus. The program put its menu entry in place; all good. However, when I go to double click on the .desktop shortcut, it opens in gedit. Hmm, this ain't quite right. This worked fine on C7 in GNOME Standard mode. So, at this point, the Mixbus_6.0.702.desktop file is on my desktop, it's in ~/Desktop with executable permissions and is owned by the correct user, but right-clicking on it does not bring up the choice to 'Allow Launching.' The GNOME Extension 'Desktop Icons' is installed and is active. I've tried a whole lot of suggestions, but wanted to see if anyone here had seen this before and has solved the problem to allow launching of the .desktop file as it is supposed to do. Just knowing that 'it works for you' actually is helpful, especially if we can figure out what is different from my install to yours (SELinux context, permissions, etc). Just knowing where to look would be helpful; and I'm going to diff my old GNOME config from my /home backup to the fresh as-installed config.... gnome-shell-extension-desktop-icons-3.32.1-10.el8.noarch is installed.

1 0

CentOS-announce Digest, Vol 184, Issue 3
by centos-announce-request＠centos.org 10 Jun '20

10 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2020:2414 Important CentOS 7 unbound Security Update (Johnny Hughes) 2. CESA-2020:2414 Important CentOS 7 unbound Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 9 Jun 2020 15:58:30 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2414 Important CentOS 7 unbound Security Update Message-ID: <20200609155830.GA14423(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2414 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2414 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) Source: 23ffc6fc5c3340e4e55cb79b8da3f80361bd4adcac8215c0cf561dd83738560a unbound-1.6.6-4.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 9 Jun 2020 17:13:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2020:2414 Important CentOS 7 unbound Security Update Message-ID: <20200609171301.GA16717(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2020:2414 Important Upstream details at : https://access.redhat.com/errata/RHSA-2020:2414 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d7c7de939c7a3dbec81adf688ae2557ca2fc3f18498eb9c09b8896d3b73dd071 unbound-1.6.6-4.el7_8.x86_64.rpm d253cd8566f10e05e7bbaba91b8985b224760bd9bc95d7be1236a61a2a300846 unbound-devel-1.6.6-4.el7_8.i686.rpm e08699d98dc4bdc6e3b0420111f4c7a54fd21233dfe55c8b0a966c770023e54f unbound-devel-1.6.6-4.el7_8.x86_64.rpm 75c67d364ea5de70c161e35d62955896b31edafb1314e1338b5ff4d265ec23e4 unbound-libs-1.6.6-4.el7_8.i686.rpm 84862fc5e25c9431d1c50a088469c311a471ecf1f475906b2758ccb65ffe2f20 unbound-libs-1.6.6-4.el7_8.x86_64.rpm da25fe4519d413260c142ca775e23133ce865ed79ceeb4e60448c1fea9b1ecd0 unbound-python-1.6.6-4.el7_8.x86_64.rpm Source: 23ffc6fc5c3340e4e55cb79b8da3f80361bd4adcac8215c0cf561dd83738560a unbound-1.6.6-4.el7_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 3 ***********************************************

1 0

C8 install problems
by ejm 10 Jun '20

10 Jun '20

Hi all, I am trying to install C8 from a DVD I made onto a 1Tb disc partitioned into 2 ext4 partitions. The first partition contains C7 which I installed via a DVD. Trying to install C8 yields an error indicating the file /dev/root is missing. I've checked the SHA256 sum for the ISO for CentOS 8.1 1911 and it checks out fine. I've burned a couple of different DVDs and get the same error about /dev/root missing from both. I burned both DVDs using the PC app PowerISO. Is that potentially a problem ? Looking at the log file of the C8 install I see before the message about /dev/root, that the file /etc/iscsi/initiatorname.iscsi is missing --and /sbin/modprobe -bv sg failed w/ exit code 1 I am doing the install with the target 1Tb disc attached, via a USB cable from a SATA docking station, to a ASUS PC running Windows 7. I boot up via the DVD just fine on the PC, but I've not been able to get past the errors from iSCSI and /dev/root. I do see a message at the very beginning of the install that the hardware family 12h is "not supported upstream". I'm not sure if that message is important, or a red herring. Is it possible that the Orico SATA docking station (model 6619) has been dropped in C8 ? Any tips or suggestions would be greatly appreciated. Thanks, --Ed

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss