- Discuss - lists.centos.org

server host keys for kvm clones
by James B. Byrne 04 Jan '12

04 Jan '12

Respecting cloning vm guests, I see in /etc/ssh the following: ssh_host_dsa_key ssh_host_dsa_key.pub ssh_host_key ssh_host_key.pub ssh_host_rsa_key ssh_host_rsa_key.pub Is there a simple script somewhere to regenerate all the server host keys for the new guest after cloning? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Re: [CentOS] probleme with my wifi card on centos 6
by fakessh 04 Jan '12

04 Jan '12

Le 2012-01-04 01:48, Ljubomir Ljubojevic a écrit : > On 01/03/2012 10:14 PM, fakessh wrote: >> So I think do a post on the bugtracker of elrepo to ask >> the creation of a new kmod-* >> >> So I tried to compile the driver provided >> in [1] >> >> module appears to load properly > When you run lspci -v, it shows something like: > > Kernel driver in use: rtl8185 > Kernel modules: rtl8185 > > ??? lspci -v does not send me what I want this my output root@localhost swilting]# lspci -v | egrep Kernel Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 Kernel driver in use: ohci_hcd Kernel driver in use: ehci_hcd Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel Kernel driver in use: forcedeth Kernel modules: forcedeth Kernel driver in use: sata_nv Kernel modules: sata_nv Kernel driver in use: sata_nv Kernel modules: sata_nv Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Kernel driver in use: k10temp Kernel modules: k10temp Kernel modules: r8185b Kernel driver in use: is missing 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller Flags: medium devsel, IRQ 16 I/O ports at bc00 [size=256] Memory at fde00000 (32-bit, non-prefetchable) [size=1K] Kernel modules: r8185b > >> Still I have failed to create the wireless interface >> despite my attempts with the file ifcfg-wlan0 tape provided I >> to try to load ifup the interface without success > > Why do you manually edit that file? Have you tried if NetworkManager > or > "system-config-network-tui" command (package has the same name) see > the > interface? I am completely lost and I do not know how please help me -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7 gpg --keyserver pgp.mit.edu --recv-key 092164A7 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting

3 8

PHP 5 bug?
by Lists 04 Jan '12

04 Jan '12

I'm using EL6 with all updates applied and getting bit by a PHP5 bug that was fixed a year and a half ago... https://bugs.php.net/bug.php?id=52534 EL6 ships with php 5.3.3, which was released prior to the bug fix. What are the chances that this fixed bug can be reported/fixed upstream at the prominent North American Linux Vendor? Here's sample code that demonstrates the problem: function CheckBug52534(){ $check = array(1 => 'a', -1 => 'b'); $str = var_export($check, true); $str = "\$a=$str;"; eval($str); if (!isset($a[-1])) return true; } echo (Checkbug52534()) ? "has it" : 'not found'; -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 2

New Tutorial - RHCS + DRBD + KVM; 2-Node HA on EL6
by Digimer 04 Jan '12

04 Jan '12

Hi all, I'm happy to announce a new tutorial! https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial This tutorial walks a user through the entire process of building a 2-Node cluster for making KVM virtual machines highly available. It uses Red Hat Cluster services v3 and DRBD 8.3.12. It is written such that you can use entirely free or fully Red Hat supported environments. Highlights; * Full network and power redundancy; no single-points of failure. * All off-the-shelf hardware; Storage via DRBD. * Starts with base OS install, no clustering experience required. * All software components explained. * Includes all testing steps covered. * Configuration is used in production environments! This tutorial is totally free (no ads, no registration) and released under the Creative Common 3.0 Share-Alike Non-Commercial license. Feedback is always appreciated! -- Digimer E-Mail: digimer(a)alteeve.com Freenode handle: digimer Papers and Projects: http://alteeve.com Node Assassin: http://nodeassassin.org "omg my singularity battery is dead again. stupid hawking radiation." - epitron

2 2

local repositories
by m.roth＠5-cent.us 04 Jan '12

04 Jan '12

I need a clarification to the documentation. My manager added a 6.2 repo; however, when I try doing pxeboot installs, it fails, asserting that it can't find the group info. Another admin I work with thinks it's not really what it's failing in, and notes that it 404's on images/updates.img and images/product.img. We *think* that's irrelevant and ok. What is not clear to me is when we run createrepo, what directory you need to be in at the time you execute it. mark

4 5

Re: [CentOS] local repositories
by m.roth＠5-cent.us 04 Jan '12

04 Jan '12

John Hodrien wrote: > On Wed, 4 Jan 2012, m.roth(a)5-cent.us wrote: <snip> >> My manager added a 6.2 repo; however, when I try doing pxeboot installs, it fails, asserting that it can't find the group info. Another admin I work <snip> >> What is not clear to me is when we run createrepo, what directory you need to be in at the time you execute it. > > I would expect the createrepo to be done from the DVD root path, but I could be wrong on that point. <snip> > Why are you doing a createrepo there at all? If you're adding your own packages to the base, why not have it as a separate repo? You seem to have misunderstood. .../CentOS/base/6.0 .../CentOS/base/6.2 rsync'd 6.2 from mirror to the latter. Now, are you saying to cd to .../CentOS/base/6.2/ and run createrepo ....? mark

1 0

Request for suggestion of a SCM package for Centos 6
by Rajagopal Swaminathan 04 Jan '12

04 Jan '12

Greetings, I have a freshly installed Centos 6.2 box with everything (darn! I had to hand select each and every package -- IIRC one of the fedora versions had a nice "select all" checkbox). My questions are: 1. Can somebody suggest a way to select all packages while installing from DVD? 2. Can somebody suggest a versioning system which integrates well with a bug tracking system (I had installed Subversion with Trac more than a couple of years back on Centos 5.x for some customer -- but it was a kludge as it required many things not provided with stock Centos 5.x like some python some php 5.2 etc.) TIA, -- Regards, Rajagopal A proud promoter of Centos for over 5 years

4 5

vmware fusion display auto-size problem
by Monty Shinn 04 Jan '12

04 Jan '12

Greetings. I am running vmware fusion 4.1.1 on a OSX host. Centos6.2 is a guest. The box is a macbook laptop running leopard. Before upgrading to 6.2, the display auto-resize (or auto-fill) was working fine. After 6.2, it has stopped working. Centos is fully updated to 6.2. I have tried to install the vmware drivers from the repository (via yum), and yum reports I have the latest. Vmware reports I have the latest version of app and linux tools. I have uninstalled and re-installed vmware tools to no avail. During the vmware tools install it returns a statement that it does not have drivers for x. Anybody else come across this? Google and vmware sites either do not have any info, or I am asking the wrong question. This being my first foray into vmware, is it advisable not to run updates until needed? What is best practice in this config? Thanks in advance for your help. Monty

3 6

Since 6.2 USB-dvices will not be recognized automatically
by Timothy Kesten 04 Jan '12

04 Jan '12

Hi Folks, since the update from 6.1 x86_64 to 6.2 x86_64 my external USB-HDs are not any longer recognized automatically. I mean that popup where I can mount/umount the devices. /var/log/messages says Jan 4 10:37:28 server1 kernel: usb 1-7.3: new high speed USB device using ehci_hcd and address 15 Jan 4 10:37:29 server1 kernel: usb 1-7.3: New USB device found, idVendor=0bc2, idProduct=2300 Jan 4 10:37:29 server1 kernel: usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 4 10:37:29 server1 kernel: usb 1-7.3: Product: Portable Jan 4 10:37:29 server1 kernel: usb 1-7.3: Manufacturer: Seagate Jan 4 10:37:29 server1 kernel: usb 1-7.3: SerialNumber: 2GH5KBG2 Jan 4 10:37:29 server1 kernel: usb 1-7.3: configuration #1 chosen from 1 choice Jan 4 10:37:29 server1 kernel: scsi15 : SCSI emulation for USB Mass Storage devices What goes wrong here? Thx Timothy

1 0

Since 6.2 USB-dvices will not be recognized automatically
by Timothy Kesten 04 Jan '12

04 Jan '12

Hi Folks, since the update from 6.1 x86_64 to 6.2 x86_64 my external USB-HDs are not any longer recognized automatically. I mean that popup where I can mount/umount the devices. /var/log/messages says Jan 4 10:37:28 server1 kernel: usb 1-7.3: new high speed USB device using ehci_hcd and address 15 Jan 4 10:37:29 server1 kernel: usb 1-7.3: New USB device found, idVendor=0bc2, idProduct=2300 Jan 4 10:37:29 server1 kernel: usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 4 10:37:29 server1 kernel: usb 1-7.3: Product: Portable Jan 4 10:37:29 server1 kernel: usb 1-7.3: Manufacturer: Seagate Jan 4 10:37:29 server1 kernel: usb 1-7.3: SerialNumber: 2GH5KBG2 Jan 4 10:37:29 server1 kernel: usb 1-7.3: configuration #1 chosen from 1 choice Jan 4 10:37:29 server1 kernel: scsi15 : SCSI emulation for USB Mass Storage devices What goes wrong here? Thx Timothy

1 0

vsftpd log issues
by Timo Neuvonen 04 Jan '12

04 Jan '12

I have an up-to-date CentOS 6 with reasonable amount of ftp activity (a dozen of network cameras uploading images every second 24x7). The first issue was that the whole /var filesystem was about to get full, because of huge ftp daemon log. vsftpd.conf says: # You may override where the log file goes if you like. The default is shown # below. xferlog_file=/var/log/vsftpd.log Ok, the above works now. But while the setting was (by default) commented out, the default wasn't /var/log/vsftpd.log but /var/log/xferlog which was growing without limits (it was over 6 GB when I first time noticed the problem) since logrotate tried to rotate vsftpd.log -rw------- 1 root root 0 Dec 31 03:07 vsftpd.log -rw------- 1 root root 39134459 Dec 31 12:19 vsftpd.log.1 -rw------- 1 root root 433305200 Dec 30 22:03 xferlog Now, after uncommenting the log file setting line in the conf the next issue is, that logrotate does rotate the log files (the old one gets .1 postfix added to its name and a new file is created), but it still keeps writing to the original file (which is renamed now) In the ls -l listing above: - vsftpd started to write log vsftpd.log around 10pm last night (when I uncommented the log setting from the conf and restarted the daemon, until that it was logging to xferlog) - during the night logrotate has changed the name of the existing log file to ...log.1 but now, several hours later, this renamed old file is still used for logging, and the new ...log file remains empty! Is there some simple option in logrotate's conf that could change this behaviour? Or how to fix this. There must be many others who already have run into this issue. Regards, Timo

3 2

Passwords apparently stopped working.
by James B. Byrne 04 Jan '12

04 Jan '12

I encountered a couple of strange events with respect to password authentication this morning. Two of our staff were unable to login onto several systems using their usual passwords. Both users had last logged in on these hosts using their accounts and passwords on Friday past. The two accounts could not log on to any of the servers for which they had access and the message log on each showed that access was denied for a failed password. The systems involved were running either CentOS-4.9 or CentOS-5.7. So, the effect was uniform across multiple hardware and software platforms. I also checked these accounts against our warm backup machine and encountered the same problems for both. I verified that the passwords being used were correct for the accounts. I also verified that neither of passwords had been reset in some months and there were no expiry dates set for the accounts. I would accept the coincidence of both forgetting their passwords except for the fact that each had kept a record of their password in their wallets and I was able to confirm those values against our records as well. Resetting both the passwords to their current values using the passwd utility on each system corrected the problem insofar as the users were concerned. However, I am somewhat perplexed as to the reason for their passwords to stop working in the first place. Is anyone here aware of any reason why this might happen? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 3

probleme with my wifi card on centos 6
by fakessh 04 Jan '12

04 Jan '12

Hello list 6 centos I wish you a very good year for this festive period I am writing to report a problem I encounter with my wireless card realtek 8150 the installer does not detect the device so the /etc/sysconfig/network-script/ifcfg-wlan0 is absent I can not find the driver for the deposit elrepo No I have in any case managed to detect my peripheique by the system Despite my many attempts sincerely -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7 gpg --keyserver pgp.mit.edu --recv-key 092164A7 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting

3 11

CentOS-announce Digest, Vol 83, Issue 1
by centos-announce-request＠centos.org 03 Jan '12

03 Jan '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0001 CentOS 6 vsftpd Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Jan 2012 01:53:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0001 CentOS 6 vsftpd Update To: centos-announce(a)centos.org Message-ID: <20120103015355.GA18562(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0001 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0001.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: de412bb59ce6fcb08bcbb745aaa73429a18aadba12e5d71e85fa672701d6f677 vsftpd-2.2.2-6.el6_2.1.i686.rpm x86_64: 38f46bd3a896ef31ce879764cb9cd27c878e5070e1f6d4a016c9b9e54853a143 vsftpd-2.2.2-6.el6_2.1.x86_64.rpm Source: 62c140cbd2d670a8010f490dfc3a7c69d09030d913ddcc01328f637bfd19db4e vsftpd-2.2.2-6.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 83, Issue 1 **********************************************

1 0

Can't find qemu-kvm
by Mark LaPierre 03 Jan '12

03 Jan '12

I just installed CentOS 6.2 32 bit today. When I try to start the Virtual Machine Manager I get a error: Packages required for KVM usage The following packages are not installed: qemu-kvm These are required to create KVM guests locally. Would you like to install them now? If I click on the [YES] button I'm told that the packages could not be found in any software source. [root@mushroom ~]# yum whatprovides "*qemu-kvm" Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: mirror.cogentco.com * extras: centos.mirror.choopa.net * updates: centos.aol.com No Matches found [root@mushroom ~]# Does anyone know where one can find qemu-kvm? -- °v° /(_)\ ^ ^ Mark LaPierre Registerd Linux user No #267004 www.counter.li.org

4 5

'last' command doesn't include ssh connections made by this perl script?
by Bennett Haselton 02 Jan '12

02 Jan '12

My home machine has IP 50.54.225.130. I have (for the purposes of this experiment) one remote machine at www.peacefire.org (69.72.177.140) and another at www.junkwhale.com. When I'm logged in to peacefire, I run this perl script to open an ssh connection to junkwhale and run a command: my $hostname="www.junkwhale.com"; my $server_password = "[redacted!]"; use Net::SFTP; use Net::SSH::Perl; my $ssh = Net::SSH::Perl->new($hostname); $ssh->login("root", $server_password); my($stdout, $stderr, $exit) = $ssh->cmd("pwd"); print "Stdout: $stdout\n"; print "Stderr: $stderr\n"; If I then log in by ssh to junkwhale from my home computer and run grep 'Accepted password' /var/log/secure the last two lines are: Jan 2 13:23:17 e2180-20059 sshd[12635]: Accepted password for root from 69.72.177.140 port 1023 ssh2 Jan 2 13:23:28 e2180-20059 sshd[12684]: Accepted password for root from 50.54.225.130 port 52484 ssh2 which is correct -- the first line is from the perl script connecting from Peacefire (69.72.177.140) and the second line is for the connection I just opened from my home computer. If, however, I run the "last" command, the first two lines are just: root pts/0 50-54-225-130.ev Mon Jan 2 13:23 still logged in root pts/0 50-54-225-130.ev Mon Jan 2 01:52 - 01:52 (00:00) In other words, the "last" command doesn't list the connection opened up by the Perl script. It only lists the times that I've connected by opening a connection manually with my SSH client. Presumably that means the connection with the perl script is not being logged in /var/log/wtmp , although the contents of the file are binary so I couldn't make much sense of them directly with a screen dump. This makes me wonder two things: 1) What is the difference, from the server's point of view, between the connection opened by the script and the one opened by my ssh client; and 2) More seriously, whatever it is that's different about the connection opened by the perl script, isn't it a bug that that connection is not recorded in wtmp? If admins frequently use the "last" command to determine who has logged into the server, couldn't an attacker do this to avoid detection? Bennett

3 2

raid resync deleting data?
by Nathan 02 Jan '12

02 Jan '12

Hello, I have a c5 box with a 6 drive raid 6 array. I was going away over Christmas so I was shutting the machine down, I noticed a raid resync (on the raid 6 array) so i stopped it, using the command # echo "idle" > /sys/block/md5/md/sync_action then shut the machine down. A week later I turned the machine on and started copying data to it around 24 hours later a raid resync occurred and wiped all the new data I had copied to it. To me this seems broken, is it because I manually stopped a previous resync that it got in this state? Any ideas? As for log messages there is nothing in the /var/log/messages file, only Jan 2 19:38:39 bolivia kernel: md: syncing RAID array md5 Jan 2 19:38:39 bolivia kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. Jan 2 19:38:39 bolivia kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction. no other errors or anything. Thanks Nathan

1 0

what percent of time are there unpatched exploits against default config?
by Bennett Haselton 02 Jan '12

02 Jan '12

Suppose I have a CentOS 5.7 machine running the default Apache with no extra modules enabled, and with the "yum-updatesd" service running to pull down and install updates as soon as they become available from the repository. (Assume further the password is strong, etc.) On the other hand, suppose that as the admin, I'm not subscribed to any security alert mailing lists which send out announcements like "Please disable this feature as a workaround until this hole is plugged", so the machine just hums along with all of its default settings. So the machine can still be broken into, if there is an unpatched exploit released in the wild, in the window of time before a patch is released for that update. On the other hand, at any point in time where there are no unpatched exploits in the wild, the machine should be much harder to break into. Roughly what percent of the time is there such an unpatched exploit in the wild, so that the machine can be hacked by someone keeping up with the exploits? 5%? 50%? 95%? Hopefully this is specific enough that the answer is not "it depends" :) , an actual numeric answer should exist -- although I don't know if anyone has ever tried to work it out. But if not, then what's a good guess, based on observing how frequently root exploits are released in the wild, and how long the patches usually take. Bennett

28 97

(no subject)
by Bennett Haselton 01 Jan '12

01 Jan '12

(Tried sending this before but it doesn't look like it went through; apologies if you're seeing it twice.) OK, a second machine hosted at the same hosting company has also apparently been hacked. Since 2 of out of 3 machines hosted at that company have now been hacked, but this hasn't happened to any of the other 37 dedicated servers that I've got hosted at other hosting companies (also CentOS, same version or almost), this makes me wonder if there's a security breach at this company, like if they store customers' passwords in a place that's been hacked. (Of course it could also be that whatever attacker found an exploit, was just scanning that company's address space for hackable machines, and didn't happen to scan the address space of the other hosting companies.) So, following people's suggestions, the machine is disconnected and hooked up to a KVM so I can still examine the files. I've found this file: -rw-r--r-- 1 root root 1358 Oct 21 17:40 /home/file.pl which appears to be a copy of this exploit script: http://archive.cert.uni-stuttgart.de/bugtraq/2006/11/msg00302.html Note the last-mod date of October 21. No other files on the system were last modified on October 21st. However there was a security advisory dated October 20th which affected httpd: http://mailinglist-archive.com/centos-announce/2011-10/00035-CentOSannounce… https://rhn.redhat.com/errata/RHSA-2011-1392.html and a large number of files on the machine, including lots of files in */ usr/lib64/httpd/modules/* and */lib/modules/2.6.18-274.7.1.el5/kernel/* , have a last-mod date of October 20th. So I assume that these are files which were updated automatically by yum as a result of the patch that goes with this advisory -- does that sound right? So a couple of questions that I could use some help with: 1) The last patch affecting httpd was released on October 20th, and the earliest evidence I can find of the machine being hacked is a file dated October 21st. This could be just a coincidence, but could it also suggest that the patch on October 20th introduced a new exploit, which the attacker then used to get in on October 21st? (Another possibility: I think that when yum installs updates, it doesn't actually restart httpd. So maybe even after the patch was installed, my old httpd instance kept running and was still vulnerable? As for why it got hacked the very next day, maybe the attacker looked at the newly released patch and reverse-engineered it to figure out where the vulnerabilities were, that the patch fixed?) 2) Since the */var/log/httpd/* and /var/log/secure* logs only go back 4-5 weeks by default, it looks like any log entries related to how the attacker would have gotten in on or before October 21st, are gone. (The secure* logs do show multiple successful logins as "root" within the last 4 weeks, mostly from IP addresses in Asia, but that's to be expected once the machine was compromised -- it doesn't help track down how they originally got in.) Anywhere else that the logs would contain useful data?

1 0

Checkinstall rpm for CentOS-6 x86_64?
by James B. Byrne 01 Jan '12

01 Jan '12

I cannot seem to find a checkinstall rpm package for CentOS-6 or one for x86_64 more recent than CentOS4. When I try to build it locally from the most recent source I can find, c.2006, I get build errors having to do with size constants either missing or improperly defined. Does anyone have a source for an rpm of this package that runs on CentOS-6_x86_64 or can recommend a replacement for it? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

5 5

CentOS 6 x86_64 can't detect raid 10
by David 31 Dec '11

31 Dec '11

Dear All, I just got a new server with the following specifications: motherboard : Intel S5500BC CPU : Xeon Quad Core 2.6Ghz RAM : 8GB HDD : 4 x 2TB SATA with configured raid 10 using raid embedded server. The problem is the centos installer can't detect raid virtual disk. I can't find any log error with the following error messages during installation process: Disks sda, sdb, sdc, sdd contain BIOS RAID metadata but are not part of any recognized BIOS RAID sets. I'm already use search engine to find the information regarding to this issue, but I can't find the solutions for CentOS. Thanks in advance -- -- Best regards, David ------------------------ http://blog.pnyet.web.id

3 2

CentOS 6 x86_64 can't detect raid 10
by David 31 Dec '11

31 Dec '11

Dear All, I just got a new server with the following specifications: motherboard : Intel S5500BC CPU : Xeon Quad Core 2.6Ghz RAM : 8GB HDD : 4 x 2TB SATA with configured raid 10 using raid embedded server. The problem is the centos installer can't detect raid virtual disk. I can't find any log error with the following error messages during installation process: Disks sda, sdb, sdc, sdd contain BIOS RAID metadata but are not part of any recognized BIOS RAID sets. I'm already use search engine to find the information regarding to this issue, but I can't find the solutions for CentOS. Thanks in advance -- -- Best regards, David ------------------------ http://blog.pnyet.web.id

3 2

RHEV guest tools
by Johan Kooijman 29 Dec '11

29 Dec '11

Hi all, We're running RHEV as our main virtualization platform. Most of our guests are CentOS though. Do you guys know if there's a guest tools package for CentOS available like there is for Windows for example? Can't really find an answer here. -- Met vriendelijke groeten / With kind regards, Johan Kooijman T +31(0) 6 43 44 45 27 F +31(0) 162 82 00 01 E mail(a)johankooijman.com

6 11

Refresh all packages?
by Weplica 29 Dec '11

29 Dec '11

Hello, I have dedicated server on CentOS Linux 6.1 with webmin/virtualmin and it tell me: Package updates 145 updates to system packages are available. Use the Virtualmin Package Updates module to install them selectively. 4 updates to Virtualmin packages are available. Use the Virtualmin Package Updates module to install them selectively. Should I update all packages?

3 2

why not have yum-updatesd running by default?
by Bennett Haselton 29 Dec '11

29 Dec '11

Ever since someone told me that one of my servers might have been hacked (not the most recent instance) because I wasn't applying updates as soon as they became available, I've been logging in and running "yum update" religiously once a week until I found out how to set the yum-updatesd service to do the equivalent automatically (once per hour, I think). Since then, I've leased dedicated servers from several different companies, and on all of them, I had to set up yum-updatesd to run and check for updates -- by default it was off. Why isn't it on by default? Or is it being considered to make it the default in the future? Power users can always change it if they want; the question is what would be better for the vast majority of users who don't change defaults. In that case it would seem better to have updates on, so that they'll get patched if an exploit is released but a patch is available. If the risk is that a buggy update might crash the machine, then that has to be weighed against the possibility of *not* getting updates, and getting hacked as a result -- usually the latter being worse. After all, if users are exhorted to log in to their machines and check for updates and apply them, that implies that the risk of getting hosed by a buggy update is outweighed by the risk of getting hacked by not applying updates. If that's true for updates that are applied manually, it ought to be true for updates that are downloaded and applied automatically, shouldn't it? Bennett

7 9

NFS options in fstab
by Daniel Bird 29 Dec '11

29 Dec '11

Hi All, I've a quick question I'm hoping someone can help out on; One of our NFS servers has an intermittent hard lock problem under high load. This is a CentOS 5.7 box. It's due for replacement sometime next year. However... The issue is when this box dies the boxes that mount the NFS exports have trouble with the mount and some processes time out casing the system mounting the file system to become unresponsive also. Of course un-monuting the file system with -l fixes it. This is an example of our current mount options in fstab hostname:/share1/ /mountpoint nfs rw,intr,soft,bg 0 0 The question is, what (other) options should we be using to allow the mounting server to ignore/fail/timeout the mount, or at least continue normal processing, when the NFS server packs up? FYI we can't move to NFS4 since we've some old boxes running Solaris 8 mounting this filesystem also, which cannot be upgraded Solaris 10 to support v4. All the best Dan

2 3

asus-wmi.ko for Asus G73Sw running CentOS 6.2
by Rob Kampen 29 Dec '11

29 Dec '11

Hi List, Just loaded our favorite OS onto my new ASUS laptop. Practically everything worked out of the box - I used the live DVD to check things out and installed from there. I have followed http://forum.notebookreview.com/asus-gaming-notebook-forum/553474-g73-asus-… to get suspend working and also to get function keys working for LCD screen backlight controls working (Fn F5 and Fn F6). Upon further searches I find that there is a kernel module asus-wmi.ko available in some distros that also allows some of the other Asus functions to operate - of particular interest is the keyboard backlight (Fn F3 and Fn F4) as well as the master backlight on/off key to function. Question, does anyone know where and how to locate this (asus-wmi.ko) and get it functioning under CentOS 6.2? I am prepared to set up the required build environment - but need some assistance as this is really at the limits of my experience. I have rebuilt the kernel to remove patches with some success previously and will have to dust off this knowledge if required. TIA

3 2

6.2 release: a thank you
by Louis Lagendijk 29 Dec '11

29 Dec '11

Gents I would like to express my appreciation for the unbelievably quick release of Centos 6.2. Thanks a million! You managed to release 6.2 some 10 days after 6.1. Johnny, you are not that ugly after all :-). Louis

8 9

Ad integration with centos 6
by dnk 29 Dec '11

29 Dec '11

Can anyone point me to a tutorial on using Active Directory to authenticate a centos 6 server? I just want to use it to authenticate, ssh and restrict access to a particular ad group. I prefer to use the lightest method possible. I know you can use ldap, or winbind, etc. I have been trying to follow the ones I have been googling, but none of them seem "quit complete. My issue is that I have no ldap experience. Dnk

4 5

Re: [CentOS] Is Biarch with 6.x now dead?
by Michael Lampe 29 Dec '11

29 Dec '11

> nope. its actually quite a major pain to manage.. > > you forgot to mention what you installed, how you did it and what you > expected V/s achieved I have installed all the packages from the two x86_64 DVDs with (eventually): yum install --exclude=ovirt\* \* I'm not using any internet-based repos for now, because of limited bandwidth at home. I haven't touched 6.x before 6.2 and just thought it would be as in 5.x (biarch wise). With 6.2 everything on my X301 semms to be working much better or at least as good as in 5.7. I will slowly, carefully, and thankfully play with your Christmas present in the next two weeks. :) -Michael

6 27

unable to initialize epel6 chroot in centos 5.7
by Jason Wee 29 Dec '11

29 Dec '11

Greetings, I have a centos 5.7 (2.6.18-274.12.1.el5) server with mock (mock-1.0.25-1.el5) installed. When initialize epel-6 chroot in centos 5.7 it failed, below are the snippet of error in the terminal output, ... ... rpmlib(PayloadIsXz) is needed by mingetty-1.08-5.el6.x86_64 rpmlib(FileDigests) is needed by popt-1.13-7.el6.i686 rpmlib(PayloadIsXz) is needed by popt-1.13-7.el6.i686 rpmlib(FileDigests) is needed by findutils-4.4.2-6.el6.x86_64 rpmlib(PayloadIsXz) is needed by findutils-4.4.2-6.el6.x86_64 (1, [u'Please report this error in https://bugzilla.redhat.com/enter_bug.cgi?product=Red%20Hat%20Enterprise%20…' ]) DEBUG: kill orphans [jason@example ~] $ I've tried clean and reinitialize the chroot but it failed. Google for this issue and mailing list only result in failed to build rpm in C5 from C6 (which is opposite of this). Has anyone successfully initialize or build srpm in C5 mock for C6 or is there a fix for this? Thank you. /Jason

2 2

NIS passwd and paswd.byname map encryption
by Boris Epstein 28 Dec '11

28 Dec '11

Hello listmates. It appears that in order to authenticate a Mac OS X Lion client via NIS the passwords in passwd and passwd.byname maps need to be MD5 encrypted. How do I see what encryption has been used in my maps? How do I change it? Thanks. Boris.

2 1

CentOS-announce Digest, Vol 82, Issue 15
by centos-announce-request＠centos.org 28 Dec '11

28 Dec '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2011:1851 Critical CentOS 5 krb5 Update (Johnny Hughes) 2. CESA-2011:1851 Critical CentOS 4 krb5 Update (Johnny Hughes) 3. CESA-2011:1852 Critical CentOS 6 krb5-appl Update (Johnny Hughes) 4. CentOS 4, CentOS 5, and CentOS 6 Announce List messages (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 27 Dec 2011 20:44:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1851 Critical CentOS 5 krb5 Update To: centos-announce(a)centos.org Message-ID: <20111227204452.GA20147(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1851 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1851.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 13b66e24262104d1a535e5d40d683de4da3847eb1b66b4430231f933af68d8a5 krb5-devel-1.6.1-63.el5_7.i386.rpm 2217c3794890bce4ed9ffe6955bed543a7c973dfebbb3bc46948e054802d4108 krb5-libs-1.6.1-63.el5_7.i386.rpm 869e0eabefe615cd7167af8cc5bb1eb107e77f26b6d45eed40ab836214e1e87f krb5-server-1.6.1-63.el5_7.i386.rpm 4bce7ce2cc6103d26833a788ac12fa5783c2458124fadd48283ee516ae3b3b0f krb5-server-ldap-1.6.1-63.el5_7.i386.rpm 74ff72965b4795c3aa25b3bb55eb0cf172517f05b71cd4b01c42fce7e1a92504 krb5-workstation-1.6.1-63.el5_7.i386.rpm x86_64: 13b66e24262104d1a535e5d40d683de4da3847eb1b66b4430231f933af68d8a5 krb5-devel-1.6.1-63.el5_7.i386.rpm 8a1a675ad00fa74748330392835b1113b1f5568f67241af1e5662f8ef85635bb krb5-devel-1.6.1-63.el5_7.x86_64.rpm 2217c3794890bce4ed9ffe6955bed543a7c973dfebbb3bc46948e054802d4108 krb5-libs-1.6.1-63.el5_7.i386.rpm e2b0de48044aed6f9f60c7ce728e83697e3c1bcc7c5d445f4b3915bc76e5fc1f krb5-libs-1.6.1-63.el5_7.x86_64.rpm 4a709c9b9b9c9c405f24a5282949619573de32e7cda13cf661b3b58c659f5bce krb5-server-1.6.1-63.el5_7.x86_64.rpm 0c67699c07c9a71f6aa33cf293ec91d737b2d81d9ff8c0c34ded40e940d6ff85 krb5-server-ldap-1.6.1-63.el5_7.x86_64.rpm 46e1ea8f197c7e94fd006ac72c6020d8b05baeeac26ff9f762dcf586af8ce3e3 krb5-workstation-1.6.1-63.el5_7.x86_64.rpm Source: 17982c402403263dc16764e2f8d9ea546bc94f7a5e2eda3bc0f1acc964ae3ba2 krb5-1.6.1-63.el5_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 27 Dec 2011 20:56:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1851 Critical CentOS 4 krb5 Update To: centos-announce(a)centos.org Message-ID: <20111227205616.GA20373(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1851 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1851.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ae7eff91d77062264e811abe4f12b3b158564d8e3e538c66de30b33e5e57f854 krb5-devel-1.3.4-65.el4.i386.rpm c1e001823d14741ad9fb53b7e987b70a7189e3e93e4efc36c706b67966077494 krb5-libs-1.3.4-65.el4.i386.rpm 90b52f16650bef67a0d6cd1a3c074ed499d10518857085f52b7af8d253ebbaad krb5-server-1.3.4-65.el4.i386.rpm daef8cc7d6544effbdee59eadac25c3647b559386592089b645dae81c5a34d21 krb5-workstation-1.3.4-65.el4.i386.rpm x86_64: 70b16a0d10dce2498ef5849b9c0ee56f28c49d2a7ee8ca8bd3396a0c70912bfb krb5-devel-1.3.4-65.el4.x86_64.rpm c1e001823d14741ad9fb53b7e987b70a7189e3e93e4efc36c706b67966077494 krb5-libs-1.3.4-65.el4.i386.rpm 7b9a183dbc97a0586c5d215fc362f812d37c61be3c5c62b5846d41983344a896 krb5-libs-1.3.4-65.el4.x86_64.rpm e4a5601d4971bc9d293960d9c0ce88c1a569e2631c6951710ec73b3b56438ab2 krb5-server-1.3.4-65.el4.x86_64.rpm 2abcb05e02d67f2fa465eb9816f2fcc678a3e54c6fdb9f835e50609d18381532 krb5-workstation-1.3.4-65.el4.x86_64.rpm Source: 6fee71efd6e6b9452cb7ee9190102e950f4d4001b5e086d8e728877244fc18e3 krb5-1.3.4-65.el4.src.rpm -- Tru Huynh CentOS Project { http://www.centos.org/ } irc: tru_tru, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 27 Dec 2011 21:11:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1852 Critical CentOS 6 krb5-appl Update To: centos-announce(a)centos.org Message-ID: <20111227211142.GA21832(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1852 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1852.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 466dbcf8db95757ba00840de0649ed411fa0250567235a3e40c6894e08b06edb krb5-appl-clients-1.0.1-7.el6_2.i686.rpm 774dbb2d54420543d91d7436daab81b2fa5d82df88690782894f136d07794759 krb5-appl-servers-1.0.1-7.el6_2.i686.rpm x86_64: b743b093a909def7bffc2ed1a2c56293681518a60cd6d51ee2a6fe07be0180ba krb5-appl-clients-1.0.1-7.el6_2.x86_64.rpm 201ffd065ff0e4dcfa43322c563c5788b689cc6575d81bc409a7a464d06e243a krb5-appl-servers-1.0.1-7.el6_2.x86_64.rpm Source: 853a15caa8310d4e67cd792beaee51e7bd758813281d1f19b7c4473f3089a644 krb5-appl-1.0.1-7.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 27 Dec 2011 15:39:50 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CentOS 4, CentOS 5, and CentOS 6 Announce List messages To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <4EFA3B26.2030002(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" Moving forward, all CentOS Announce List messages for updates will be like the ones released today. There will no longer be a separate e-mail for each ARCH within a major version, but only one combined e-mail for each major version. This will result in 1/2 the announce list traffic as there used to be a separate i386 and x86_64 for each major version ... or in today's case, there would be 6 e-mails and not 3. If you did not receive any of the 3 announce list e-mails today and you want to to get them, please check that you have the applicable "Topics" checked in your profile on the CentOS Announce list here: http://lists.centos.org/mailman/listinfo/centos-announce (the last option on the page is "unsubscribe or edit options" ... enter the e-mail address that you have subscribed to the list, login with your password and pick the "Topics" you are interested in. Most of the time, people do not go back and add new Major Versions ... like CentOS 6 ... and so they are not getting e-mails for the new releases) Also, be advised that a "Digested" version of all the announcements goes to the main CentOS list daily, so if you are a member of that list and if a daily digest of all announcements is good enough, then you do not even need to subscribe to the CentOS Announce List separately to be informed of updates. -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net

1 0

Installation on a Macbook Pro with nVidia MCP89 SATA controller
by Peter Hopfgartner 28 Dec '11

28 Dec '11

Did anybody succeed in installing CentOS on a MacBook Pro with nVidia chipset (2010 edition, http://www.heise.de/mac-and-i/produkte/macbook-13-2-4-ghz-mitte-2010-86/#pr… When I boot with the current minimal install disk, Linux does simply see non disks. Regards, Peter -- Peter Hopfgartner R3 GIS http://www.r3-gis.com

4 8

Is Biarch with 6.x now dead?
by Michael Lampe 28 Dec '11

28 Dec '11

I'm experimenting with 6.2 now. Things seem to be really great so far! Distribution closure is one of my favourite pets. So I tried to install everything. I found only one problem, but that's another (minor) thing. But I found almost nothing under /usr/lib. So, Biarch is really dead? Funny! A couple of years back, I finally opted for CentOS instead of Debian just because of Biarch ... I'm getting real old ... -Michael

3 2

Hyper V integration question
by Dvorkin, Asya 27 Dec '11

27 Dec '11

Hello everyone, I have Hyper V integration working properly, but needed to do an update to 2.6.18-274.12.1.el5-x86_64. Since then, it no longer works. As discovered previously, one needs to rebuild Hyper V Integration tools due to the kernel panic. http://www.sudonym.com/398/kernel-panic-after-yum-update-centos-with-hyper-… Done. But I'm getting an error message: "Your system DOES NOT support the timesource driver" when running make. adjtimex is installed - adjtimex-1.20-2.1. Any ideas? I've successfully followed the same steps in the past, but right now they are just not working. Thank you! Asya

1 2

Plymouth "Failed to read image"
by 夜神　岩男 27 Dec '11

27 Dec '11

I'm trying to learn more about Plymouth, but am having trouble finding sufficient documentation on it. After a rebuild of Plymouth with a few theme changes, I am getting an error message on boot "Failed to read image" and then it gives me the grub screen to boot one of the three kernels installed. Boot works fine and I actually see the proper splash once I select a kernel. Changing themes works, etc. The single problem is that weird message about image read failure. So my question: Since Plymouth actually is working fine after the 5 second delay, just what image is it that can't be read? Is this a message about, say, the "background image" for the menu (the screen background *is* black, actually) or the "ramfs boot image" which apparently works just fine after a moment? Perhaps the error message is just confusing me. If it is just the background image, then what is not valid about the splash.xpm.gz now? I've reduced it to 14 indexed colors, 640x480 resolution (which I thought were the criteria?).

1 1

VMware tools not installing init.d script
by Brian McKerr 27 Dec '11

27 Dec '11

Has anyone else seen this on Centos 6.x x64? Running vSphere 5.0 and I install tools from the VMware tar.gz file with ' vmware-install-tools.pl -d' it seems to do all the usual/right things. Once completed there is no 'vmware-tools' listed in 'chkconfig --list'. A reboot of the box leaves vmware tools not running. I have tried completely uninstalling tools and re-installing, not difference. Cheers.

3 3

gnome keyring
by Jerry Geis 26 Dec '11

26 Dec '11

I am having an issue I have not ran into before... I set my box to "auto" login by changing the file: more /etc/gdm/custom.conf # GDM configuration storage [daemon] AutomaticLoginEnable=true AutomaticLogin=silentm TimedLoginEnable=true TimedLogin=silentm TimedLoginDelay=0 [security] [xdmcp] [greeter] [chooser] [debug] It does auto login - however then when I try to VNC into the box I get the message about the "gnome remote desktop enter password for default keyring to unlock". I do have a VNC password set. I did some searching but the things I found did not make a difference. Any thoughts? Jerry

3 2

Putty error "Network error: Software caused connection abort"
by reynierpm＠gmail.com 26 Dec '11

26 Dec '11

Hi every: I have a test or development environment in my Windows workstation with VMware Workstation 8.0 where I have around 7 VM with CentOS 6.2 and each of them have 2 network interfaces: one bridge and the other NAT. Since a few days I have been experimenting some problems with Putty because I get this error: --------------------------- PuTTY Fatal Error --------------------------- Network error: Software caused connection abort --------------------------- OK --------------------------- I did not touch any SSH configuration so I can't see where the problem is, any help or solution to this? Cheers and thanks in advance Ing. Reynier Pérez Mira Cel: +58 424.180.5609 / +58 416.921.7406 Correo: reynierpm(a)gmail.com / reynierpm(a)hotmail.com

1 0

Kernel Panic
by TE Dukes 26 Dec '11

26 Dec '11

Hello, Just upgrade to 6.2 but have not been able to run a newer kernel than 2.6.32-131.12.1.el6.x86_64. I'm getting the error at boot, Not syncing: VFS Unable to mount root fs on unknown-block(0,0) I have google this error and see a lot of the same but no clear answers. Any help would be appreciated. TIA -Eddie

2 4

Mystery of email authentication
by Timothy Murphy 26 Dec '11

26 Dec '11

I'm trying to setup sendmail/dovecot on a new server running CentOS-6 (well, CentOS-6.2 now). Everything seems to go well, but when I run fetchmail I get this warning: ------------------------------------ [tim@grover ~]$ fetchmail imap.maths.tcd.ie fetchmail: Warning: the connection is insecure, continuing anyways. (Better use --sslcertck!) ------------------------------------ I should say that everything runs fine on a CentOS-5.7 server, and as far as I can see the setup on the new server is the same. Under CentOS-5.7 I don't get the same warning: ------------------------------------ [tim@helen ~]$ fetchmail imap.maths.tcd.ie fetchmail: No mail for tim at imap.maths.tcd.ie ------------------------------------ If I do add --sslcertck (as suggested) I get the response: ------------------------------------ [tim@grover ~]$ fetchmail --sslcertck imap.maths.tcd.ie fetchmail: Server certificate verification error: self signed certificate fetchmail: This means that the root signing certificate (issued for /C=IE/ST=Dublin/L=Dublin/O=School of Mathematics, Trinity College, Dublin./OU=Automatically-generated IMAP SSL key/CN=imap.maths.tcd.ie/emailAddress=postmaster(a)maths.tcd.ie) is not in the trusted CA certificate locations, or that c_rehash needs to be run on the certificate directory. For details, please see the documentation of -- sslcertpath and --sslcertfile in the manual page. 139925738739528:error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed:s3_clnt.c:1063: fetchmail: SSL connection failed. fetchmail: socket error while fetching from tim(a)imap.maths.tcd.ie fetchmail: Query status=2 (SOCKET) ------------------------------------ That is on the new server. On the old server (where the fetchmail command works) I get much the same warning, though briefer. ------------------------------------ [tim@helen ~]$ fetchmail --sslcertck imap.maths.tcd.ie fetchmail: Server certificate verification error: self signed certificate 11316:error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed:s3_clnt.c:915: fetchmail: SSL connection failed. fetchmail: socket error while fetching from tim(a)imap.maths.tcd.ie fetchmail: Query status=2 (SOCKET) ------------------------------------ I must admit I've never been very clear on SSL authentication -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College Dublin

2 5

kernel panic/abort during boot
by fred smith 26 Dec '11

26 Dec '11

Just did an in-place update from 6.1 to 6.2 on my eeepc 901 (Atom CPU). during boot, (if I hit ESC to see the boot messages) it says "starging udev" then nothing else for a few seconds, then a huge register dump scrolls by. it's too big to see the beginning of it. If I boot from the prior kernel and look in /var/log/messages, I don't see any evidence of the failed boot. I've seen the other thread titled "kernel panic", and it seems to be due to a missing initramfs, but there is an initramfs for 2.6.32-220.el6 already in /boot, so I don't think that would be the problem. Can anyone suggest how I would isolate what's going on here? -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord detests the way of the wicked but he loves those who pursue righteousness. ----------------------------- Proverbs 15:9 (niv) -----------------------------

7 20

is centos bugzilla borked?
by fred smith 26 Dec '11

26 Dec '11

I managed to get an account set up on the centos bugzilla, after futzing with it for a half hour, but for the life of me I cannot get to the page where I would enter a new one. my browser just says "transferring data from bugs.centos.org" and sits there with the little thingie going round and round. for an hour or more. disconnect and try again. same thing. I've been trying for over two hours to enter a bug and this is all I can get. So, the inevitable question of its "borked-ness" state arises. the reason it took me as long as stated to get an account set up was because of similar shenanigans on the various pages one needed to go thru to do the account creation. but at least it worked after a while. Suggestions, anyone? TIA! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For him who is able to keep you from falling and to present you before his glorious presence without fault and with great joy--to the only God our Savior be glory, majesty, power and authority, through Jesus Christ our Lord, before all ages, now and forevermore! Amen." ----------------------------- Jude 1:24,25 (niv) -----------------------------

3 4

Pass iPhone/iTouch through kvm to Win7 VM?
by David McGuffey 25 Dec '11

25 Dec '11

I'm all Linux at home and trying to get a Win7 running in a VM on CentOS 5.6 and kvm to connect to my iTouch and iPhone. When I plug the iPhone in and run lsusb I get an address of 05AC:12A0 I put that into a hostdev block in the xml file that defines the VM. <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x0781'/> <product id='0x554f'/> </source> </hostdev> But...no joy. Anyone get kvm to pass an iTouch or iPhone through to the VM so it can communicate with iTunes? Dave

1 1

yum --import of RPMforge
by Frank M. Ramaekers 23 Dec '11

23 Dec '11

Using the instructions on: http://wiki.centos.org/AdditionalResources/Repositories/RPMForge#head-f0 c3ecee3dbb407e4eed79a56ec0ae92d1398e01 I enter the command: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt and it comes back to the prompt, like it worked, but attempting to confirm the download: rpm -K rpmforge-release-0.5.2-2.el6.rf.*.rpm results in: error: rpmforge-release-0.5.2-2.el6.rf.*.rpm: open failed: No such file or directory (Turning -vv on the -import) D: loading keyring from pubkeys in /var/lib/rpm/pubkeys/*.key D: couldn't find any keys in /var/lib/rpm/pubkeys/*.key D: loading keyring from rpmdb D: opening db environment /var/lib/rpm cdb:mpool:joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: opening db index /var/lib/rpm/Name rdonly mode=0x0 D: read h# 983 Header sanity check: OK D: added key gpg-pubkey-c105b9de-4e0fd3a3 to keyring D: read h# 1018 Header sanity check: OK D: added key gpg-pubkey-6b8d79e6-3f49313d to keyring D: Using legacy gpg-pubkey(s) from rpmdb D: closed db index /var/lib/rpm/Name D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm What is going on here? Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | American Income Life Insurance Company | 254-761-6649 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at PrivacyAct(a)ailife.com.

3 2

CentOS-announce Digest, Vol 82, Issue 14
by centos-announce-request＠centos.org 23 Dec '11

23 Dec '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2011:1849 Important CentOS 6 kernel Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 23 Dec 2011 09:04:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1849 Important CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20111223090453.GA6679(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1849 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1849.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0d618681dcf0320b7738d61755176f29f5a1b420bff4da8935100f552e1025df kernel-2.6.32-220.2.1.el6.i686.rpm 19f69f8bca540924e5beb4199aaacd0f40f32c653cb4fb69d8ec959d0a7e7776 kernel-debug-2.6.32-220.2.1.el6.i686.rpm 4315afe9dbed2f82b14297d3cf628c496bab0e304acb283bf055453b8c694a0a kernel-debug-devel-2.6.32-220.2.1.el6.i686.rpm 3e023609162be7f5e78cc522368f1874a97a06c6b5ab99e603ee6c29eebe1663 kernel-devel-2.6.32-220.2.1.el6.i686.rpm 1c6165fb16840d7e00b203e6f9c79c3c8f5075cda9de6bcaa9facea067e8bb4a kernel-doc-2.6.32-220.2.1.el6.noarch.rpm 785dbb7e528ed5346b948e0512b6a5c2c8eea2d1b023eaea325b57a938d6eb8f kernel-firmware-2.6.32-220.2.1.el6.noarch.rpm 62b439f353d7ce850b6dfbc2a9dbc182b4c57dd93336ba45b582f10bf7cdcb6c kernel-headers-2.6.32-220.2.1.el6.i686.rpm 6ce3201f6f587ca611d6c9c15768ac264bd457a70601ca2509c1f5e580da5675 perf-2.6.32-220.2.1.el6.i686.rpm ed38c3f65183873ece7f4c169c166d12803524580dedb5f40a6db70a617b16ab python-perf-2.6.32-220.2.1.el6.i686.rpm x86_64: 3f320d062ad7a29b7e634acffa0d010055257902a9a8834107ac4a8e551de30a kernel-2.6.32-220.2.1.el6.x86_64.rpm 8955406f215e4f13ac32b1aa7670811e6ac88475efbe08f22792f1a9817c375e kernel-debug-2.6.32-220.2.1.el6.x86_64.rpm eecadaf3bb075214621340b1ccdcb653a5c5ab1de0b9db018b911d201b4be7f3 kernel-debug-devel-2.6.32-220.2.1.el6.x86_64.rpm 752255bee18bec5bba257df4a86e1279eb089d0492b7690684318fe0cf51e7e5 kernel-devel-2.6.32-220.2.1.el6.x86_64.rpm 04d5447c73b6cdeb6f7c92c76d52f38ef520adab7fecc86cce1d9b8bbe813c1f kernel-doc-2.6.32-220.2.1.el6.noarch.rpm 06cc127dc18e5a893dcf746c0a0b24132ad0014e15174af37dc48a3c0b7d2c60 kernel-firmware-2.6.32-220.2.1.el6.noarch.rpm c157b607eb25d4031252b15e7009d589c905adbfb34ea2f33caa2aceefb91db2 kernel-headers-2.6.32-220.2.1.el6.x86_64.rpm be2101e96e6a2437b8c8a498bd884e15d2a3f520017f12401e3a2bf4a3a74387 perf-2.6.32-220.2.1.el6.x86_64.rpm 12d7fc281b409f2d237b965acc482088df46bac0178674da350cf968c0014121 python-perf-2.6.32-220.2.1.el6.x86_64.rpm Source: 9053d6a5c786048027ebb745ca170a637ab62ab133ddc13efd2456af92cc3673 kernel-2.6.32-220.2.1.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 82, Issue 14 ***********************************************

1 0

lm-sensors on Sun hardware
by Alan McKay 23 Dec '11

23 Dec '11

Hey guys and gals, Anyone have any experience with getting lm-sensors to run on Sun hardware? In particular Sunfire x2250 and x4170 I was running 5.3 on these boxes and sensors-detect would not find anything. I did a bit of research and as I recall thanks to this list discovered some bugs that were affecting me, so upgraded to 5.7. CPU temp sensors were then detected, but no fan sensors. At least on the x2250. The x4170 still detects nothing. thanks, -Alan -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

2 3

Where is the boot.iso file?
by carlopmart 23 Dec '11

23 Dec '11

Hi all, I am trying to install CentOS 6.2 x86_64 under vmware workstation to do some tests. I do all installs using boot.iso file and installing all packages from mirror.centos.org, but where is boot.iso file for CentOS 6.2?? I don't see it under repository tree ... Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

2 1

CentOS-announce Digest, Vol 82, Issue 13
by centos-announce-request＠centos.org 23 Dec '11

23 Dec '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2011:1836 CentOS 6 bind Update (Johnny Hughes) 2. CESA-2011:1819 Moderate CentOS 6 dhcp Update (Johnny Hughes) 3. CESA-2011:1815 Moderate CentOS 6 icu Update (Johnny Hughes) 4. CESA-2011:1814 Moderate CentOS 6 ipmitool Update (Johnny Hughes) 5. CESA-2011:1807 Important CentOS 6 jasper Update (Johnny Hughes) 6. CEBA-2011:1847 CentOS 6 java-1.6.0-openjdk Update (Johnny Hughes) 7. CESA-2011:1790 Moderate CentOS 6 krb5 Update (Johnny Hughes) 8. CEBA-2011:1778 CentOS 6 libvirt Update (Johnny Hughes) 9. CEEA-2011:1839 CentOS 6 net-snmp Update (Johnny Hughes) 10. CEBA-2011:1838 CentOS 6 nss Update (Johnny Hughes) 11. CESA-2011:1821 Moderate CentOS 6 pidgin Update (Johnny Hughes) 12. CESA-2011:1801 Important CentOS 6 qemu-kvm Update (Johnny Hughes) 13. CESA-2011:1777 Important CentOS 6 qemu-kvm Update (Johnny Hughes) 14. CEEA-2011:1776 CentOS 6 rng-tools Update (Johnny Hughes) 15. CEBA-2011:1779 CentOS 6 selinux-policy Update (Johnny Hughes) 16. CEBA-2011:1837 CentOS 6 selinux-policy Update (Johnny Hughes) 17. CESA-2011:1791 Moderate CentOS 6 squid Update (Johnny Hughes) 18. CEEA-2011:1810 CentOS 6 sssd Update (Johnny Hughes) 19. CESA-2011:1780 Moderate CentOS 6 tomcat6 Update (Johnny Hughes) 20. CEBA-2011:1816 CentOS 6 xorg-x11-server Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 22 Dec 2011 15:44:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1836 CentOS 6 bind Update To: centos-announce(a)centos.org Message-ID: <20111222154438.GA20523(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1836 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9ea016735ff112bfae8ef2384d9cb0749ba34575c100e71a51befcbf1c9cfac2 bind-9.7.3-8.P3.el6_2.1.i686.rpm 272f07955c58464ca5d16ca62d6ec9a19a4ca0f43652af8a45954a8ccc243b1a bind-chroot-9.7.3-8.P3.el6_2.1.i686.rpm 2d6933d09473791b540b023ef798ff0607dbf09db7cac740f17f93470c5c5e9d bind-devel-9.7.3-8.P3.el6_2.1.i686.rpm ed825c6686057e755e6189bee596edb4f1ec7712d4dfbb5da655ea85a8ebda7f bind-libs-9.7.3-8.P3.el6_2.1.i686.rpm 167809525d969aca3e585be208f23a1c33f08224f7aa5b1b77ca710ce15b5d48 bind-sdb-9.7.3-8.P3.el6_2.1.i686.rpm ef3698da1213c8110a858773f8f9bfb08f471ed6c4c5cc53334d951c0422645e bind-utils-9.7.3-8.P3.el6_2.1.i686.rpm x86_64: 58e617cf06af96ce9582f2e473d710fe241761f8eb53aac8e497492fce409381 bind-9.7.3-8.P3.el6_2.1.x86_64.rpm 48dcf981ea91353c9277cb8a07be760a0e8f1359bba6cc8ab68323bbdeaa55e4 bind-chroot-9.7.3-8.P3.el6_2.1.x86_64.rpm 2d6933d09473791b540b023ef798ff0607dbf09db7cac740f17f93470c5c5e9d bind-devel-9.7.3-8.P3.el6_2.1.i686.rpm 0ae8ca4c3d219c3e9ab97bc54d041f84f3954d2fae5fc38a1e572a674a731c65 bind-devel-9.7.3-8.P3.el6_2.1.x86_64.rpm ed825c6686057e755e6189bee596edb4f1ec7712d4dfbb5da655ea85a8ebda7f bind-libs-9.7.3-8.P3.el6_2.1.i686.rpm a0a245c9a7345ee5115fcafa08042fda935586262e4f5a182cc0ae911cc0bdb9 bind-libs-9.7.3-8.P3.el6_2.1.x86_64.rpm 873a8efcd9ccc55f0668449a93843b78699ed3efcf7381acd4b3217450d7183d bind-sdb-9.7.3-8.P3.el6_2.1.x86_64.rpm d0914711d44cd1965603b6af6734a8af7a616ce77060497397e4ed832141f538 bind-utils-9.7.3-8.P3.el6_2.1.x86_64.rpm Source: 90e36807140f69b08b6c320b2c57a3ab7ad49d713670ac767451f7df4f431dac bind-9.7.3-8.P3.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 22 Dec 2011 15:44:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1819 Moderate CentOS 6 dhcp Update To: centos-announce(a)centos.org Message-ID: <20111222154459.GA20612(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1819 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1819.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3add95d882c8a2bdb15d3b1fe6aafa631655ad4eff7fc9c75054f0f8cb98fc0b dhclient-4.1.1-25.P1.el6_2.1.i686.rpm 6757cf5f118c05382de8d369fc98622a256ddf3e5a8035fc83189b4a7e5944be dhcp-4.1.1-25.P1.el6_2.1.i686.rpm 59d4e97129477e68774d6a23fb663d5c867d03ceaa717df4303417a72f897bae dhcp-common-4.1.1-25.P1.el6_2.1.i686.rpm 4fe188440c341a43385bd384a5c89765fff92ba70d9d28fc5cd37ad306452046 dhcp-devel-4.1.1-25.P1.el6_2.1.i686.rpm x86_64: bdae006fd6388f7fca24d82e28f5bc803beb73588f6d3aa501e78ab32a451a3e dhclient-4.1.1-25.P1.el6_2.1.x86_64.rpm 28ac668fdc9c470dd061f9f2c179be251d33d941b5b2912465694970d380e5e7 dhcp-4.1.1-25.P1.el6_2.1.x86_64.rpm 44783d55bf0383f2b3d2e504afb6bb85f5dd4dcb1948d53bc2c92b5774b598bc dhcp-common-4.1.1-25.P1.el6_2.1.x86_64.rpm 4fe188440c341a43385bd384a5c89765fff92ba70d9d28fc5cd37ad306452046 dhcp-devel-4.1.1-25.P1.el6_2.1.i686.rpm eca7c7c2429694b554e97e1dcd0b69e84f5973a96780c9560b1050554549cfa5 dhcp-devel-4.1.1-25.P1.el6_2.1.x86_64.rpm Source: 6d99c496c17553663eb0b04743c34a84879953f59295d5e37686a6255e792078 dhcp-4.1.1-25.P1.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 22 Dec 2011 15:45:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1815 Moderate CentOS 6 icu Update To: centos-announce(a)centos.org Message-ID: <20111222154528.GA20704(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1815 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1815.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9e45679b2ebfea059981581acf182ef869923bec036e585a04ad740820492f71 icu-4.2.1-9.1.el6_2.i686.rpm a49fc5b33f38487f53a3ea2f4a4db50002c5f2581b0dd3fd63b97ea0366f6418 libicu-4.2.1-9.1.el6_2.i686.rpm 7cd6349d932fac8a7bcdfa7d36b29efe0d1c4ba04b9ce2f6a117ba1165c5ea9f libicu-devel-4.2.1-9.1.el6_2.i686.rpm 28845b104b35a2696c91cfdeeac5b529cdd4d1f1560f6eda94f3b45d8fdc03c3 libicu-doc-4.2.1-9.1.el6_2.noarch.rpm x86_64: dfbf778c3004fa23437341d4d401634579d29d63204df36723ab6244eb67b231 icu-4.2.1-9.1.el6_2.x86_64.rpm a49fc5b33f38487f53a3ea2f4a4db50002c5f2581b0dd3fd63b97ea0366f6418 libicu-4.2.1-9.1.el6_2.i686.rpm 92635510797083f24575bc79b979c4ddcba0b7d3a59d3de76d5530192b7c3d75 libicu-4.2.1-9.1.el6_2.x86_64.rpm 7cd6349d932fac8a7bcdfa7d36b29efe0d1c4ba04b9ce2f6a117ba1165c5ea9f libicu-devel-4.2.1-9.1.el6_2.i686.rpm a1aba41dcc12ae5993dcca8df45d97a227dba6016073994409272709a2ed39ce libicu-devel-4.2.1-9.1.el6_2.x86_64.rpm f1bd04b0d2e67c4679eeed9aa1ecb1422c23776f6dba830369307d7398d5b26d libicu-doc-4.2.1-9.1.el6_2.noarch.rpm Source: 95808d8095e711290a835706f5c7e247d9e93241108703fe025596ae9fbb6688 icu-4.2.1-9.1.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 22 Dec 2011 15:45:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1814 Moderate CentOS 6 ipmitool Update To: centos-announce(a)centos.org Message-ID: <20111222154557.GA20774(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1814 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1814.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 583c451e1c1759ab60d296f761dd14f97e22107894fbfc8d0825ccc327caa050 ipmitool-1.8.11-12.el6_2.1.i686.rpm x86_64: 4c6e68cb9e52d8ec6307a86bd795483915e8763131fdab37ce14c8ee77595cb1 ipmitool-1.8.11-12.el6_2.1.x86_64.rpm Source: b785718a3d33ca05ac76fc3be5d2da2f42e22150163854a96d11b71939caf8a2 ipmitool-1.8.11-12.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 22 Dec 2011 15:46:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1807 Important CentOS 6 jasper Update To: centos-announce(a)centos.org Message-ID: <20111222154617.GA20861(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1807 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1807.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3737bac6b614d1a529ba16046ee2282c59f22ae542cac367c2bf5312ac576d02 jasper-1.900.1-15.el6_1.1.i686.rpm a9fd1b8a5c7f7a821d80d7d8efcba6d63c8483038a9a090a8a323f01908a5a27 jasper-devel-1.900.1-15.el6_1.1.i686.rpm 17d7e61c236217c0287c67b3ac2212902e472f7ac4c859d033ee6e2465e264cb jasper-libs-1.900.1-15.el6_1.1.i686.rpm 6d42804a9af8fe8b7f8071f51bf0dd2aeba0f07d7b418d67889986756c24840c jasper-utils-1.900.1-15.el6_1.1.i686.rpm x86_64: 7835f5b3713afcb6d96457b2e4bc329669ecbd24f7665e920e601f0259cb29e1 jasper-1.900.1-15.el6_1.1.x86_64.rpm a9fd1b8a5c7f7a821d80d7d8efcba6d63c8483038a9a090a8a323f01908a5a27 jasper-devel-1.900.1-15.el6_1.1.i686.rpm 561597b4d16ff39afb0b03ed2959570e2d4def573018a2d1313e84d54a84e2a1 jasper-devel-1.900.1-15.el6_1.1.x86_64.rpm 17d7e61c236217c0287c67b3ac2212902e472f7ac4c859d033ee6e2465e264cb jasper-libs-1.900.1-15.el6_1.1.i686.rpm 9404b5f7ac2cfe7c3c2511345f86323b9cc8bc272cb3c407b91a1f7c8370afcd jasper-libs-1.900.1-15.el6_1.1.x86_64.rpm adc2c91ee1b2478dba89614d6ce6e716aa099e80f8984b637db07aa94232f63f jasper-utils-1.900.1-15.el6_1.1.x86_64.rpm Source: fae6625be5251dd7b9f5dbdd729fa7590e7974b4c03f29538d5c3b4bce0093de jasper-1.900.1-15.el6_1.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Thu, 22 Dec 2011 15:47:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1847 CentOS 6 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20111222154712.GA20951(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1847 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1847.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c463d8f18eb94ed54fbc728a6462beba41f5525db45ebbb55d355e09b61608b7 java-1.6.0-openjdk-1.6.0.0-1.42.1.10.4.el6_2.i686.rpm 7201269ba348b2d2018059f330d0b0d2889815b21b2bbf09ea2e84fe04870ea8 java-1.6.0-openjdk-demo-1.6.0.0-1.42.1.10.4.el6_2.i686.rpm 5a518e4a7d9a6859a7f5b37f27ed88e02b27af67863d10e3ae3785d8949fbd4f java-1.6.0-openjdk-devel-1.6.0.0-1.42.1.10.4.el6_2.i686.rpm c51a4913275ae04e46caf4522a87c21e2f2c8721ef83dc9d93c6b7c766719814 java-1.6.0-openjdk-javadoc-1.6.0.0-1.42.1.10.4.el6_2.i686.rpm 36fbee24bf1c5ce216a4caef045d529ed0eb74af76a3cbf7ce4c806ee21d80dd java-1.6.0-openjdk-src-1.6.0.0-1.42.1.10.4.el6_2.i686.rpm x86_64: da359fa039f08998a03c96c32407e453835aa5ddb7abf53a0166634c24631cc5 java-1.6.0-openjdk-1.6.0.0-1.42.1.10.4.el6_2.x86_64.rpm e357ecf4baf4c74d133a1196f4a14c27b93fa6ad064938870c8b52e5acd9d39d java-1.6.0-openjdk-demo-1.6.0.0-1.42.1.10.4.el6_2.x86_64.rpm a287d7440a9d494fda537117400826a3b0bd54785cd45c73da00aec951be512e java-1.6.0-openjdk-devel-1.6.0.0-1.42.1.10.4.el6_2.x86_64.rpm 40caf91265572e35d9f9c711595ed6f33e0be0925f08955b448b8faea9d453fd java-1.6.0-openjdk-javadoc-1.6.0.0-1.42.1.10.4.el6_2.x86_64.rpm dd4329b3417678277fd872eeaf1a3b3bc6f1db602cf3e45094927f392d6fcb0e java-1.6.0-openjdk-src-1.6.0.0-1.42.1.10.4.el6_2.x86_64.rpm Source: 4089712dcdd0ac814921281881fd13f5fe0ddfb30a66d30bf91e1e5543a370f2 java-1.6.0-openjdk-1.6.0.0-1.42.1.10.4.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Thu, 22 Dec 2011 15:48:45 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1790 Moderate CentOS 6 krb5 Update To: centos-announce(a)centos.org Message-ID: <20111222154845.GA21051(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1790 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1790.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c175d1f00ab800eac3a1ddcee8c32c7cdaf4860fd7607e6cf33abcf5ca2a8a94 krb5-devel-1.9-22.el6_2.1.i686.rpm 29a889f804e5f3399aa75051260764123b0c8e25cab8144e0cc68096c961760e krb5-libs-1.9-22.el6_2.1.i686.rpm 2a1694af5c356ab2ac6bb0f8f778c7203146a2fcea3ca15263a67ce96ce57144 krb5-pkinit-openssl-1.9-22.el6_2.1.i686.rpm c1e31ed346d36d21f6919adfd3b59fc01f14c7d015c3d524e92baf4bdded3e63 krb5-server-1.9-22.el6_2.1.i686.rpm ae1a750344780668dec0a1322c4d4539a85ee7f157828689ad7171a0f332888e krb5-server-ldap-1.9-22.el6_2.1.i686.rpm ab624bc190dd017848536db47f0dc3f2f03742fd28ec1cfa025461329f25ec5f krb5-workstation-1.9-22.el6_2.1.i686.rpm x86_64: c175d1f00ab800eac3a1ddcee8c32c7cdaf4860fd7607e6cf33abcf5ca2a8a94 krb5-devel-1.9-22.el6_2.1.i686.rpm 7aec840ec04fd20389c02174559b345d54b005a8c855b382f0a494ad3a1c0421 krb5-devel-1.9-22.el6_2.1.x86_64.rpm 29a889f804e5f3399aa75051260764123b0c8e25cab8144e0cc68096c961760e krb5-libs-1.9-22.el6_2.1.i686.rpm 44117bd1f0a5e2bce7f561087ae355aa3c88ddcc51fb1fd443be0ca567e197ca krb5-libs-1.9-22.el6_2.1.x86_64.rpm 0337943a8005f74ca19705b85d1a3875d94f35d86f6f334ab75c0427cfde51a7 krb5-pkinit-openssl-1.9-22.el6_2.1.x86_64.rpm fa0681cc3ef54017fb2a9b2ace889c6be13d376bddca6c532918ee78475148b4 krb5-server-1.9-22.el6_2.1.x86_64.rpm ae1a750344780668dec0a1322c4d4539a85ee7f157828689ad7171a0f332888e krb5-server-ldap-1.9-22.el6_2.1.i686.rpm af10f62befb3784ccb0d5b8904e90701cab8fc8e072a4567c703ca3aebb73d2f krb5-server-ldap-1.9-22.el6_2.1.x86_64.rpm 7dd402995402ff6d3494aee927b693e883a9014b038a3cfd3972b396dc1391a6 krb5-workstation-1.9-22.el6_2.1.x86_64.rpm Source: ed2c10aa65dc8d198bae234f295d5c88d7ef6b2dcd88b46669e1951ce2c949f2 krb5-1.9-22.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Thu, 22 Dec 2011 15:50:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1778 CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20111222155053.GA21148(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1778 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1778.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e6c9426ae98f88e25a160acceea8a1b0c7c1e255cedbbc3fece22d9e00f686ae libvirt-0.9.4-23.el6_2.1.i686.rpm 6d4c5c3aec507c623537981e4d8f069d1d0974e8a65f702899cf2f2abeb627fa libvirt-client-0.9.4-23.el6_2.1.i686.rpm 93aba4b58fce58b43620ed9779ebd3e53b0247f7ce9a3ccbb37e8441bd14546c libvirt-devel-0.9.4-23.el6_2.1.i686.rpm eb93cb73171c2584ee71cfc1bb6f10283633676e0a127dac7fd88538e88bac4a libvirt-lock-sanlock-0.9.4-23.el6_2.1.i686.rpm 0360cef0b0b71b3884235f8c00491284d6165464ccff15d77d29133d930af970 libvirt-python-0.9.4-23.el6_2.1.i686.rpm x86_64: 239ad33f95d8b422cf482f190c311338405a31b60d421d712411d68294a926e3 libvirt-0.9.4-23.el6_2.1.x86_64.rpm 6d4c5c3aec507c623537981e4d8f069d1d0974e8a65f702899cf2f2abeb627fa libvirt-client-0.9.4-23.el6_2.1.i686.rpm 3ec833a3e32ab441413582881d9a1ea76c0d087a6451d28b49d12a588a0fe924 libvirt-client-0.9.4-23.el6_2.1.x86_64.rpm 93aba4b58fce58b43620ed9779ebd3e53b0247f7ce9a3ccbb37e8441bd14546c libvirt-devel-0.9.4-23.el6_2.1.i686.rpm 20c94606126d9f778c42a058dcb3ab2e13013889ea4c1e0ac78f4e1348364c65 libvirt-devel-0.9.4-23.el6_2.1.x86_64.rpm 213b3d61ee2685afefb383c386eaefe2052b7b2906347d471e45f250a06acde0 libvirt-lock-sanlock-0.9.4-23.el6_2.1.x86_64.rpm e9520b696f7db029e1399455548279dc5e4d40a3c2c7dd1f086eb693cd7abdb4 libvirt-python-0.9.4-23.el6_2.1.x86_64.rpm Source: faac39fee85536a3ae410824591494f8bb6c1869742b3f21b0d5813bc1bea842 libvirt-0.9.4-23.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Thu, 22 Dec 2011 15:51:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2011:1839 CentOS 6 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20111222155119.GA21262(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2011:1839 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1839.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 912e07ac768b567ec36828860ad8f4b4202ecb925766b88fb01bbf5e6f7acadc net-snmp-5.5-37.el6_2.1.i686.rpm 5b064a61c8f492112eda7103fca429f34806542258bb8235c4b50a1c63b8f6b9 net-snmp-devel-5.5-37.el6_2.1.i686.rpm 4943e7f2a5fbbde17f769e56e96582cd2012f81ad5a750b4ed75a268fc847f22 net-snmp-libs-5.5-37.el6_2.1.i686.rpm 168f24d852c551f6b6a1b1832c03e6c62279ecea91ff84c12cda30a68d16cac7 net-snmp-perl-5.5-37.el6_2.1.i686.rpm 85074266994a5ab6096b05515ada0613f7c584d096c026ce5a85de1de1165c09 net-snmp-python-5.5-37.el6_2.1.i686.rpm d11241c1021caeff58eca8fb2846a97dee6b8fa391f327e50eed623f0e6af267 net-snmp-utils-5.5-37.el6_2.1.i686.rpm x86_64: 568dbf2d1f5847a1f19fa3cfbbd14626f2bdaf19b46a97ba3b85420a4c83677c net-snmp-5.5-37.el6_2.1.x86_64.rpm 5b064a61c8f492112eda7103fca429f34806542258bb8235c4b50a1c63b8f6b9 net-snmp-devel-5.5-37.el6_2.1.i686.rpm ad981ed1e4edbc4d09481c3e7ee96a04485580157660f46457d56d84873a348e net-snmp-devel-5.5-37.el6_2.1.x86_64.rpm 4943e7f2a5fbbde17f769e56e96582cd2012f81ad5a750b4ed75a268fc847f22 net-snmp-libs-5.5-37.el6_2.1.i686.rpm 8c0539961e91d0e0370ef2854a9f6ec4a47e9da9aa40621ee67fc7cb432fc3ae net-snmp-libs-5.5-37.el6_2.1.x86_64.rpm e002b877f3abd379fe8d48e130216d2d3d6eb7f8d9c95050f2ab9aa2e17b2bfc net-snmp-perl-5.5-37.el6_2.1.x86_64.rpm c198aeb0d8a8e41c6e08a20a16ea02319800a78359d5762f05516d2a5e8f96bb net-snmp-python-5.5-37.el6_2.1.x86_64.rpm 5b11c63d66dd7b613ecaa1868c3b912a5eca816f5adc5d345b4f4be2c38ab925 net-snmp-utils-5.5-37.el6_2.1.x86_64.rpm Source: 70d8c3e8be4a81c2670b5fbeaada58d91d48fdd969c2c639086edbf16616671e net-snmp-5.5-37.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Thu, 22 Dec 2011 15:51:44 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1838 CentOS 6 nss Update To: centos-announce(a)centos.org Message-ID: <20111222155144.GA21357(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1838 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1838.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b73c6df59fd8589e32db28d80a92e94fe93a81309419c0ac81d522b0d11c50df nss-3.12.10-17.el6_2.i686.rpm 5f883ededd3e4ea35a447c2afc062752c6bce80771af982d10f354573bc391fa nss-devel-3.12.10-17.el6_2.i686.rpm 806b149dc80d216c4188f993c09e2e553e52a19488ef7dff2f76fe7359e2a7bd nss-pkcs11-devel-3.12.10-17.el6_2.i686.rpm 298c0d1e945e539e7a29c9edfb33d34ab73d3c364c055bc4784b8122d699315e nss-sysinit-3.12.10-17.el6_2.i686.rpm d516c98b63f0359b73e5688028c6e319b01a559b26421d9757236df598793603 nss-tools-3.12.10-17.el6_2.i686.rpm x86_64: b73c6df59fd8589e32db28d80a92e94fe93a81309419c0ac81d522b0d11c50df nss-3.12.10-17.el6_2.i686.rpm dad5d4b23c6f27616ae139e405176bc1aad7514764768f8f89bc0861523ae097 nss-3.12.10-17.el6_2.x86_64.rpm 5f883ededd3e4ea35a447c2afc062752c6bce80771af982d10f354573bc391fa nss-devel-3.12.10-17.el6_2.i686.rpm 6f62893772a683db396301ce17f7992380e490520eb47b1ffccda010ad0d5c52 nss-devel-3.12.10-17.el6_2.x86_64.rpm 806b149dc80d216c4188f993c09e2e553e52a19488ef7dff2f76fe7359e2a7bd nss-pkcs11-devel-3.12.10-17.el6_2.i686.rpm cbf42140b9fa1b8a3df11f3f411bd1a53f00a64e5304aa5bd5009bdacd5c2d5a nss-pkcs11-devel-3.12.10-17.el6_2.x86_64.rpm 94ca2abbe8c591895da11e4dcf6e9873b0867e7a180eaf97c5d1520e244a814e nss-sysinit-3.12.10-17.el6_2.x86_64.rpm 3e6ad2705ffb50ee52a47101d9a80e110197051cb62def716869f10fa049ca70 nss-tools-3.12.10-17.el6_2.x86_64.rpm Source: 1b5f07f513cafb40e444c08489037e6766cef7470a51c6020d1787c9ae3c7698 nss-3.12.10-17.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Thu, 22 Dec 2011 15:52:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1821 Moderate CentOS 6 pidgin Update To: centos-announce(a)centos.org Message-ID: <20111222155255.GA21479(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1821 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1821.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 42b8825789b4d515eac5e205780cb41668a3b4b8087b50dca89127659046459f finch-2.7.9-3.el6.2.i686.rpm 9e7ace3a0edf50d2e372a9da713a07e4e03fac027720ff41944937c50858ccd2 finch-devel-2.7.9-3.el6.2.i686.rpm f6f9e4b106f7d71bdbe3c38b9e4865dbb158e4ad33742f77639985d1fb788a2e libpurple-2.7.9-3.el6.2.i686.rpm 68c7f1f448ae62098618ca02d51f87c2e8df641affd8f324eda11b5b205083ff libpurple-devel-2.7.9-3.el6.2.i686.rpm 10413d2425728c724a5b9cdfc5bf4b9ec31f7d272011ed0e6269a8d96bac2a77 libpurple-perl-2.7.9-3.el6.2.i686.rpm 3def78ab8e6487244703c427a9c664bcae55435c9649e7ec37b9f17d3fa67d32 libpurple-tcl-2.7.9-3.el6.2.i686.rpm 5aee2af59c84444e6d2ee73eb04e90698005525d4493fcfc6bf7a06592469001 pidgin-2.7.9-3.el6.2.i686.rpm de5f39711f8f72171df92bb451f1adcf46fb8adffb9e6015d5235927175f52e9 pidgin-devel-2.7.9-3.el6.2.i686.rpm 6ba78421aacfdd1f38f84be79926810799a6e8dd18648bfb705de5993dce4b95 pidgin-docs-2.7.9-3.el6.2.i686.rpm e4abf9627c14f63668e7410dddb2043db5176296f3e489ab1dc92811c60435b7 pidgin-perl-2.7.9-3.el6.2.i686.rpm x86_64: 42b8825789b4d515eac5e205780cb41668a3b4b8087b50dca89127659046459f finch-2.7.9-3.el6.2.i686.rpm 629079cf5f3eda918460c539b8b12c18ec784c5bc3db13090addf52fa0b5da03 finch-2.7.9-3.el6.2.x86_64.rpm 9e7ace3a0edf50d2e372a9da713a07e4e03fac027720ff41944937c50858ccd2 finch-devel-2.7.9-3.el6.2.i686.rpm cfa638ed5b100db7d002384a6e01bd84f48b350b80dc907b6acff3892a37bd33 finch-devel-2.7.9-3.el6.2.x86_64.rpm f6f9e4b106f7d71bdbe3c38b9e4865dbb158e4ad33742f77639985d1fb788a2e libpurple-2.7.9-3.el6.2.i686.rpm d727ba76647b214847c580c5600a5a66a5a348f4974432d09867c12a519a20ba libpurple-2.7.9-3.el6.2.x86_64.rpm 68c7f1f448ae62098618ca02d51f87c2e8df641affd8f324eda11b5b205083ff libpurple-devel-2.7.9-3.el6.2.i686.rpm 4aaa262a9bcd866aff70712bab69ffa2895727e1f9dc9e9b97ee721a693eaac3 libpurple-devel-2.7.9-3.el6.2.x86_64.rpm 9f330b7751678fb2573f9f67fcb880ea86ffbc599c25c4e04dfdc0b83bacd4e0 libpurple-perl-2.7.9-3.el6.2.x86_64.rpm 4a9b7b2c922b9b5a6aeb3d94d003368b57305c9dddeb1fef2592af6978103e48 libpurple-tcl-2.7.9-3.el6.2.x86_64.rpm e8d91f64667906613ee8bcd431b858635d8ac97046a2f2a54cf8627d6964c141 pidgin-2.7.9-3.el6.2.x86_64.rpm de5f39711f8f72171df92bb451f1adcf46fb8adffb9e6015d5235927175f52e9 pidgin-devel-2.7.9-3.el6.2.i686.rpm 78b7fd135ad8c31e8165a871dd03fcc97ff0f25c71174eec7d2b85aa40ab6b62 pidgin-devel-2.7.9-3.el6.2.x86_64.rpm 32373955d02a993a2f28d5aa47ef69b70a8cb45c32032fdc101636503f2e59f6 pidgin-docs-2.7.9-3.el6.2.x86_64.rpm 4d5718ea13ab51adfb66e4945ccc30a4f314a0395206e232771f942cec91617a pidgin-perl-2.7.9-3.el6.2.x86_64.rpm Source: 4c3e183b03b2f700d45a69d577cda35639ed614925647ffb0462950299114c0a pidgin-2.7.9-3.el6.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 12 Date: Thu, 22 Dec 2011 15:53:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1801 Important CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20111222155351.GA21550(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1801 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1801.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b62802aeb64cd2914ecc0986f823f6541bd5752f692e7f35362386837f6c3beb qemu-img-0.12.1.2-2.160.el6_1.9.x86_64.rpm e9e64c7773984627f87dfa50cea97d55c243f26deebd0fa1d5a7914c8b636bc6 qemu-kvm-0.12.1.2-2.160.el6_1.9.x86_64.rpm f447bcc2cde5f035c3872681b432b64af117cd79f7a0c9a736a6a0bcbe9d3337 qemu-kvm-tools-0.12.1.2-2.160.el6_1.9.x86_64.rpm Source: 84087e0fd2896c163bb7f599aa95336af6a9a9625262c158a22146a2957acebd qemu-kvm-0.12.1.2-2.160.el6_1.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 13 Date: Thu, 22 Dec 2011 15:54:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1777 Important CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20111222155426.GA21615(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1777 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1777.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f1962248bbeaee3a090f90ac21e021c277c50179f3e3153e7ddaefbeaf5cb133 qemu-img-0.12.1.2-2.209.el6_2.1.x86_64.rpm e75a724cd79d712b2952144002c4a08bfa5f1f5d8ad25350772aca338feae41f qemu-kvm-0.12.1.2-2.209.el6_2.1.x86_64.rpm aabf140b3e0283e47aaaaf97e5c9b0eb41b092caba43c36a4fb47ed855cab60f qemu-kvm-tools-0.12.1.2-2.209.el6_2.1.x86_64.rpm Source: 06565eee6991819a14a0aa48ae3f5e1212312fd91054b7712d918bb13f2ae7a4 qemu-kvm-0.12.1.2-2.209.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 14 Date: Thu, 22 Dec 2011 15:55:04 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2011:1776 CentOS 6 rng-tools Update To: centos-announce(a)centos.org Message-ID: <20111222155504.GA21688(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2011:1776 Upstream details at : https://rhn.redhat.com/errata/RHEA-2011-1776.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dbaa92f851f2e6e5c95d5490eb20bc95c736e4f4ccadfff7fc631d374397bb2a rng-tools-2-13.el6_2.i686.rpm x86_64: 110e9781ead0a29cc000b2ba9a5542dc337518b9eaf18eb902534c965abc222c rng-tools-2-13.el6_2.x86_64.rpm Source: db43bfdfcfcadc551226e45bddb2bed8e4ac7224e091dab1113b04594c3469fc rng-tools-2-13.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 15 Date: Thu, 22 Dec 2011 15:55:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1779 CentOS 6 selinux-policy Update To: centos-announce(a)centos.org Message-ID: <20111222155537.GA21799(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1779 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1779.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 412c7398644fe5334de9551ca29b39ea550eb61f2d0da9d52bdf65e5c8d52d90 selinux-policy-3.7.19-126.el6_2.3.noarch.rpm 36d73b00ac82df5a4ab652400ce99f69a694bb7a7282d84d9856d4ef597c28be selinux-policy-doc-3.7.19-126.el6_2.3.noarch.rpm b135981794825fddde10bec040fad1f98d8abf1f540b459da262c9a9f34589c5 selinux-policy-minimum-3.7.19-126.el6_2.3.noarch.rpm dbbeaac066589fe87d7116f5dd31bff22d53b3be11332be3a40c6f049ac54af2 selinux-policy-mls-3.7.19-126.el6_2.3.noarch.rpm 7b413d48934207e29cc6799ec86393177025591c901c1fad1686927e57119987 selinux-policy-targeted-3.7.19-126.el6_2.3.noarch.rpm x86_64: 68106e75be3b428a9de7c44ef97227f347022142cb3575a45949f6e5a9fd7205 selinux-policy-3.7.19-126.el6_2.3.noarch.rpm 4daab0a472c7adc2a09a8d0a98105291e800ffe116ce9a624780fbb3bfdd7e6c selinux-policy-doc-3.7.19-126.el6_2.3.noarch.rpm 2a014998c56b637c31e4080b3315c3173c4bf069f593f8d9bf357d96adb59491 selinux-policy-minimum-3.7.19-126.el6_2.3.noarch.rpm cedd27e40e4e7d7d5e19ff07d8d060b8d34e66980e2a955c229a38a4234cdff9 selinux-policy-mls-3.7.19-126.el6_2.3.noarch.rpm 45ad3a9c3be00ebcfb85a6a875368ba1aa77e27a3e5d4566bf976595307f7c4b selinux-policy-targeted-3.7.19-126.el6_2.3.noarch.rpm Source: 8139361d72b67c0143e50e2609dd85d33e206d9da146db19c081fdcfb4a30e18 selinux-policy-3.7.19-126.el6_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 16 Date: Thu, 22 Dec 2011 15:55:54 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1837 CentOS 6 selinux-policy Update To: centos-announce(a)centos.org Message-ID: <20111222155554.GA21917(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1837 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1837.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e237efd71785ffc965605151496a17e9dd252d4a5151bb0cbcf9e8ca8aa4df03 selinux-policy-3.7.19-126.el6_2.4.noarch.rpm 2a14c0cb9a760e6ab9f111d148dfa7678e84f353aeb8f27a5bc80f304003feee selinux-policy-doc-3.7.19-126.el6_2.4.noarch.rpm e028606b79eb77c13ee823d52741c59960d87db0586bd412abc3e0f335b5b1bc selinux-policy-minimum-3.7.19-126.el6_2.4.noarch.rpm a716f7c39c6d3a691d831d5e0d030cf91a506e58ff6aaebf0962c9d2ef396c82 selinux-policy-mls-3.7.19-126.el6_2.4.noarch.rpm ce9c4b5486515a1f789c673fca9ca5d255c2f5b7defb7e25e04ff0131543330f selinux-policy-targeted-3.7.19-126.el6_2.4.noarch.rpm x86_64: f86e9e4607b614979a10fcf74a07597148f5dd01ab6df2f99d6e846d0213d5b9 selinux-policy-3.7.19-126.el6_2.4.noarch.rpm fb15c63253e99e89cea64b15483f67dca23887500b3a16e3e5fdce16bbc561d1 selinux-policy-doc-3.7.19-126.el6_2.4.noarch.rpm cf5f29192a7d34a96abfd1d17ecfdbcd3ee822731faf81bfd7b749d7c0b16f7f selinux-policy-minimum-3.7.19-126.el6_2.4.noarch.rpm 771f19d5dbbe8bf98f6e798d88af24abe9f0d6980f600e697bde2dc6c82076ff selinux-policy-mls-3.7.19-126.el6_2.4.noarch.rpm 238275dd88e9c8f0fc458098f1d4716936a1d31a6c71d414a7a463e792ead80b selinux-policy-targeted-3.7.19-126.el6_2.4.noarch.rpm Source: 0ebe14d441d66941419c7220bd65280de05c3886b6f066de741269e57c68f217 selinux-policy-3.7.19-126.el6_2.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 17 Date: Thu, 22 Dec 2011 15:56:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1791 Moderate CentOS 6 squid Update To: centos-announce(a)centos.org Message-ID: <20111222155624.GA21988(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1791 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-1791.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c646c04ec79b419addd91d9144ae6741c70f922a3758b86e25e50c749c97e7a0 squid-3.1.10-1.el6_2.1.i686.rpm x86_64: 68a1cd9da321e9a61c5617e54cb4d62f5c1d51f2554f5fafe97614af82f01812 squid-3.1.10-1.el6_2.1.x86_64.rpm Source: fb1934d8385ccc3e02a386d9f63d2542c580e437ee811b82d6e7b1415321b845 squid-3.1.10-1.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 18 Date: Thu, 22 Dec 2011 15:56:45 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2011:1810 CentOS 6 sssd Update To: centos-announce(a)centos.org Message-ID: <20111222155645.GA22087(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2011:1810 Upstream details at : https://rhn.redhat.com/errata/RHEA-2011-1810.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4e5414a07488039978fffe07e4dc04a8fd50bb109d2f8fa36f7ce14cfa53ce7a libipa_hbac-1.5.1-66.el6_2.1.i686.rpm 7cbe7b59753f71818458fff4a548d76f5c99208002921027fc0d96f9812b3c7b libipa_hbac-devel-1.5.1-66.el6_2.1.i686.rpm a7c7d2c1ef6e40161b8cf96c2b7789f7c7e189e6887c05abb0f1916b32e59e9c libipa_hbac-python-1.5.1-66.el6_2.1.i686.rpm d42bad13b8907b368849d8af00ef201cb77c3eacc04a183d17e88f1838026d8f sssd-1.5.1-66.el6_2.1.i686.rpm 0060d433147429ac7f5aef27d44cce6fbcc61faf2d8dfa37486e249aea858878 sssd-client-1.5.1-66.el6_2.1.i686.rpm d77d86704000e41ab15b61afa17476bc3be840f60bd143c8a5301fac62a9fb19 sssd-tools-1.5.1-66.el6_2.1.i686.rpm x86_64: 4e5414a07488039978fffe07e4dc04a8fd50bb109d2f8fa36f7ce14cfa53ce7a libipa_hbac-1.5.1-66.el6_2.1.i686.rpm 19b61af19459dac01b653c1cffccb47dcdb48ce793ce759a9a748b9bf6e4a81a libipa_hbac-1.5.1-66.el6_2.1.x86_64.rpm 7cbe7b59753f71818458fff4a548d76f5c99208002921027fc0d96f9812b3c7b libipa_hbac-devel-1.5.1-66.el6_2.1.i686.rpm b0cbf8aaea38750d07270c6965ac7208721a5af3a3f5232ca05389fe1ecc5cde libipa_hbac-devel-1.5.1-66.el6_2.1.x86_64.rpm 7db03394ff0cefd587ee3489dd53238c327c5314d59a5572050fd446d313daf0 libipa_hbac-python-1.5.1-66.el6_2.1.x86_64.rpm 65a6c88f3d3cf60fe298f9038cada559de5a4f3b78efcf5f232bdbda8743d19c sssd-1.5.1-66.el6_2.1.x86_64.rpm 0060d433147429ac7f5aef27d44cce6fbcc61faf2d8dfa37486e249aea858878 sssd-client-1.5.1-66.el6_2.1.i686.rpm 34645cf99fe7ff8e6caab45f98bfdcf53486d045c90eb275575d1b226f305dbd sssd-client-1.5.1-66.el6_2.1.x86_64.rpm 616769329e6af49d1d4dc69410a3998968b4bbc427831280330b189ebd4fd1ae sssd-tools-1.5.1-66.el6_2.1.x86_64.rpm Source: 7ca269c69bde4255cbf9800b6e87b09f972a068d6087eb7e4313d9c539ee9c1e sssd-1.5.1-66.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 19 Date: Thu, 22 Dec 2011 16:00:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2011:1780 Moderate CentOS 6 tomcat6 Update To: centos-announce(a)centos.org Message-ID: <20111222160012.GA23512(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:1780 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2011-1780.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a210b582f2aecff17c7be534670a957555ea14318e42b9af6da1a1c4ab6ea7db tomcat6-6.0.24-35.el6.noarch.rpm 812040ced83b05396ed60c44da9c82d07ee8e2fafa3e6b26a2a87d1972ee7b0e tomcat6-admin-webapps-6.0.24-35.el6.noarch.rpm c255c0f5d5c4f4e250016ef84c1f420ee5e720c4840132ad3a95ff434df9fe54 tomcat6-docs-webapp-6.0.24-35.el6.noarch.rpm 8dc184d598995ff1287941a158bf3ca1b1adfacd70c2a4cf2126f28ac1aea3b1 tomcat6-el-2.1-api-6.0.24-35.el6.noarch.rpm 92a771e4a50ff998cd8328975f8632a24bbac8816b30dec1664b94f596c5146e tomcat6-javadoc-6.0.24-35.el6.noarch.rpm 0ade7f7e8f66ccb6e048be5658d37402999288f518343edc631566457c6591b8 tomcat6-jsp-2.1-api-6.0.24-35.el6.noarch.rpm efc59d17bb24536def4d0b975207afcf7309e9cd909e3b93425ecb0405dbd2b8 tomcat6-lib-6.0.24-35.el6.noarch.rpm af910cd4fafbf5e586a766c3fa666afa3debedf35e3c24505c61f7e4faa48f26 tomcat6-servlet-2.5-api-6.0.24-35.el6.noarch.rpm e0e49111b12082946a6a5d1b851dd10e684394cc39feceefb46d886ea38cdd5e tomcat6-webapps-6.0.24-35.el6.noarch.rpm x86_64: eb888d22d76efea66c99780cd603a0dcea5a4baa00f99f7392413364fa673e9d tomcat6-6.0.24-35.el6.noarch.rpm b21ecfe0b551831d3426b19d6c57b58fbc47d7c0962574e88b8119ce2de0ca39 tomcat6-admin-webapps-6.0.24-35.el6.noarch.rpm 56f49cc7fca2fe71f046eafedc249694d3caf804e789c6b6d39efbb006542c38 tomcat6-docs-webapp-6.0.24-35.el6.noarch.rpm 786e878b7835ddea6dd70ef415887858577ba980af61724b733e9dc382e11692 tomcat6-el-2.1-api-6.0.24-35.el6.noarch.rpm ef699ec700ba5852eadbb0168e9d7ff8b77238827f19055ea8aa47faaa9a0c3c tomcat6-javadoc-6.0.24-35.el6.noarch.rpm c06f56d42a21325d7c1dbc2a7c7885b4e60eed0eb7a2bc0db8806117847038e1 tomcat6-jsp-2.1-api-6.0.24-35.el6.noarch.rpm c83dc3566433baf7d196d4034ff2bebb65982a36d5163ee970a801b21c7ee96f tomcat6-lib-6.0.24-35.el6.noarch.rpm e6dc97670c9a0de48239f36cf253327168b76e870436424ed0499b1716028fac tomcat6-servlet-2.5-api-6.0.24-35.el6.noarch.rpm 622f1a25072180fbac814fa6c03f08587446d3622a53f021a1234ea042f73e08 tomcat6-webapps-6.0.24-35.el6.noarch.rpm Source: 40f0165b7c74a8fe570cdc5825d59afdb2a5a9c8dc92d417e933b9d83a7f69cc tomcat6-6.0.24-35.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 20 Date: Thu, 22 Dec 2011 16:00:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:1816 CentOS 6 xorg-x11-server Update To: centos-announce(a)centos.org Message-ID: <20111222160051.GA23625(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:1816 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1816.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d3289ad2eb060ff4c03d33de1976f2171b6533b680b623a541fd3effcf670b14 xorg-x11-server-common-1.10.4-6.el6_2.1.i686.rpm a1bea207598f3f8491c4fa4490030cdbd30bcf969959aab88a17470a420322b8 xorg-x11-server-devel-1.10.4-6.el6_2.1.i686.rpm e36bf9f591eff63b29d61f2e0ed8176ec5ad2a76ac274af3264c0a89d57afc12 xorg-x11-server-source-1.10.4-6.el6_2.1.noarch.rpm e1443d7ef21075995d75263ca6f4ef7a56b62c7b122dcb3dd76ab6738a69dc01 xorg-x11-server-Xdmx-1.10.4-6.el6_2.1.i686.rpm 8574c9a1ec96a4d327adf5b2d79b1bf0a151be2defcb3eeda1f5d30503906a48 xorg-x11-server-Xephyr-1.10.4-6.el6_2.1.i686.rpm b6938ad05ecdbbc51166de1b1db375564d24797648a8d93e3668f98e36be249b xorg-x11-server-Xnest-1.10.4-6.el6_2.1.i686.rpm 9394e81a69806de3dd3b7edda838c6c2b505e936cf781f76bae5fd538f783acf xorg-x11-server-Xorg-1.10.4-6.el6_2.1.i686.rpm a338a2a4b1a4f02274dbfc7fc6ea7c59e667e079ac9ac6a64aebc924151f5bb7 xorg-x11-server-Xvfb-1.10.4-6.el6_2.1.i686.rpm x86_64: 16bc62b110b4f10488432a79918369791679f11f87c0b51bdd6c694ee1e23aa6 xorg-x11-server-common-1.10.4-6.el6_2.1.x86_64.rpm a1bea207598f3f8491c4fa4490030cdbd30bcf969959aab88a17470a420322b8 xorg-x11-server-devel-1.10.4-6.el6_2.1.i686.rpm 26c2156015f47c73814f6c81d79f7627761ee1a5ccfc6fa49b370c475d2e8c88 xorg-x11-server-devel-1.10.4-6.el6_2.1.x86_64.rpm 9a74103ae117d2c9f3b6b2c8e44eccb286c450f9a60d896bcd60eb67d300efbb xorg-x11-server-source-1.10.4-6.el6_2.1.noarch.rpm 55523dc66222f08387eab83625564f079c249fe398af43d943d8cb764a742de5 xorg-x11-server-Xdmx-1.10.4-6.el6_2.1.x86_64.rpm 6d88c2ee74f5e75b6f95f0d1e012ae35f0269037cd373cdae541b32ba1c7a381 xorg-x11-server-Xephyr-1.10.4-6.el6_2.1.x86_64.rpm 1247779ec2294b5775808f1d722ac6a5dfb52db5ed3b5d53b733bec75f92209f xorg-x11-server-Xnest-1.10.4-6.el6_2.1.x86_64.rpm e0f7394e8124e6ceee6ab7fbbcdc9203f471399f3c32622d3bb5fe6e01c63c6e xorg-x11-server-Xorg-1.10.4-6.el6_2.1.x86_64.rpm 80b49ece743f49fbf7cfe2c0d1a5939e30d1cefd5692d8d7c945fc36a93ace03 xorg-x11-server-Xvfb-1.10.4-6.el6_2.1.x86_64.rpm Source: f71abd7b188fe4ea0771b839f070de374bfb4f53a8a23616fd02ef314469dad7 xorg-x11-server-1.10.4-6.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 82, Issue 13 ***********************************************

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss