- Discuss - lists.centos.org

CUPS not rendering documents via Samba
by Kevin Thorpe 23 Jun '11

23 Jun '11

Hi guys, any CUPS / Samba experts out there? The CUPS printing guide is a horrendous maze of options. I've got nearly there but I've got one thing wrong and I don't know where to look. I set up our two printers (HP K5400s) using the GUI printer tool. Both print the test page just fine. I set up the [printers] and [print$] shares and can browse to the printers from Windows (XP for me) I managed to get the postscript drivers installed with cupsaddsmb and it installs on the XP client just fine. ..... sadly it just prints the postscript instead of rendering it. I guess the printer queue is in raw mode but I can't see where to change it. I vaguely remember foomatic and such from ages back. Can someone point me at the right part of the setup to fix this please? -- Kevin Thorpe Head of IT PI Benchmark

12 29

Year in log files
by Fajar Priyanto 23 Jun '11

23 Jun '11

Hi, Can we display year in log files timestamp? We are being audited and the auditor wants to know when we apply certain patches. yum.log shows it, but it doesn't have the year. I can argue based on common sense, but it would be much nicer if the year is there. Example: Apr 12 11:41:25 Updated: krb5-libs-1.6.1-55.el5_6.1.i386 Apr 12 11:41:27 Updated: openssl-0.9.8e-12.el5_5.7.i686

2 1

Lingering dhclient issue
by Alfred von Campe 22 Jun '11

22 Jun '11

I recently reconfigured some CentOS 4.3 systems that were using DHCP to use static IP addresses. At the same time, the systems were moved to a new VLAN. Here is the approximate sequence of events that took place: 1. ifdown eth0 2. edit /etc/sysconfig/network-scripts/ifcfg-eth0 with static IP address 3. wait for network folks to reconfigure switch 4. ifup eth0 I may have reversed steps 1 and 2 on some of the systems. The problem was that the dhclient process didn't go away, and kept renewing the old lease. Our DHCP server is configured to contact the DNS server and update the entry for each host it serves. So the DNS entries for these systems were pointing to the old address in the old VLAN. The eth0 interface itself just kept the static IP address for which it was configured. It took me a while to figure out what was going on. My question is, what could I have done to avoid this (other than killing the dhclient process)? Is there a better way to reconfigure an interface to use a static address? I am not interested in solutions that involve using a GUI (i.e., only command line solutions). Thanks, Alfred

9 17

OT: high static in server room
by Fajar Priyanto 21 Jun '11

21 Jun '11

Hi guys, Sorry for the OT. For the last couple of weeks I notice that the static in my server room is worrisomely noticeable. I cannot see what may be causing it.... Care to share some of your experience what may be the cause and the remedy? Thank you.

17 37

CentOS 5 32bit and 3Tbyte drives
by Stephen Harris 21 Jun '11

21 Jun '11

Has anyone tried to use these yet? For hysterical raisons, my primary machine is CentOS5 32bit (up to date). In the machine I have a SiI 3132 dual port SATA controller with port multiplier. Both ports are plugged into an external storage device which presents 4 SATA disks on each port, for a total of 8 possible disks. Currently I have 5*1Tb in there, configured as RAID5 via mdadm I boot off an internal SATA disk; I don't see a need to change that. But space is running out; I wondering if the new 3Tb disks would work in this scenario; most importantly will 2.6.18-238.9.1.el5PAE see the whole disk? And also whether I need to be worried about 4Kbyte sectors. These new disks are confusing me! -- rgds Stephen

7 11

Slightly OT: First Time KVM and LVM on Centos
by Jeff Boyce 21 Jun '11

21 Jun '11

Greetings - I am a novice system administrator and will soon be purchasing a new server to replacing an aging file server for my company. I am considering setting up the new server as a KVM host with two guests; one guest as the Samba file server and a second guest as a testing area. My old server was set up about 7 years ago and has a 5 disk raid 5 configuration without LVM. I understand the benefits of using LVM and KVM in the right circumstances, but have never used either of them. I have spent a couple of days over the last week trying to understand how to setup a KVM host with guests, but there is an area that I still don't understand; that is the relationship between the underlying raid partitions, LVM, and allocating space to a host and guests. Many of the standard search term combinations in Google don't seem to be getting me anywhere. From what I have read so far I think that I want to have my file server guest using a raw partition rather than an image file, but I haven't found anything with examples or best-practices guidance for partitioning or volume management with hosts and guest VMs. So I am hoping that someone here can give me some pointers, or point me to some clear how-to's somewhere. Any help is appreciated. Thanks. Jeff Boyce Meridian Environmental www.meridianenv.com

7 8

lots of disk activity keep process from responding
by Jerry Geis 20 Jun '11

20 Jun '11

hi all I have something like 3000 log files in a directory (from data collection). At 4am in the morning cron runs a script of mine that essentiallly trims all files in that directory back to a certain size. Basically does a "tail -c XXXX filename > tmp_filename" I have noticed that only around the 4am-4:15 time frame when the trim is happening does my other process log connection attempts but my process (forking and opening databases) is not responding in time to give data back to the connecting process. Not critically important as it just tries again and all ok... My question is how do I tell the script that runs to run at a lower priority perhaps ??? Or is there another way to do this I am not aware of? The trimmming of the log files is just so they they dont take a bunch of space on the HD. It doesnt have to be done supper fast or anything. Any ideas I might try? Thanks, Jerry

6 5

Re: [CentOS] Config file semantics.
by m.roth＠5-cent.us 18 Jun '11

18 Jun '11

Devin Reade wrote: > --On Friday, June 17, 2011 02:27:22 PM -0400 m.roth(a)5-cent.us wrote: > >> Minkowski space? > > Sure. I'll implement M-x minkowski-space-mode as soon as I > get 'elsewhere' (in Minkowski terms, that is). > You're sure that's not a vim option? mark Kirk: Warp 5, Scotty! Scotty: We're shovelin' as fast as we can, captain! Goddamn dnsorbs! Two bounces....

3 4

non-fluff: NIC configuration: mingnt?
by m.roth＠5-cent.us 17 Jun '11

17 Jun '11

We've got this really bizarre problem, trying to get a bridge/firewall working. My manager and I are almost grasping at straws.... Anyway, I'm using lshw to look at an identical machine, and a Dell 1950 that works when configured as a bridge, and there's one thing I don't know: does anyone know what mingnt is? Thanks. mark

2 1

Config file semantics.
by Mike A. Harris 17 Jun '11

17 Jun '11

Personally, I find that indenting config files by 3 spaces has a lot of advantages to indenting them by 4 spaces although conventional wisdom might suggest otherwise. Who's with me on this?

12 15

athentication service
by nabi 17 Jun '11

17 Jun '11

2 1

Odd issue with custom udev rule at boot
by James A. Peltier 16 Jun '11

16 Jun '11

Hi All, I've written a custom udev rule to change the permissions of /dev/ttyS* but it doesn't seem to be working at boot up. If I run /sbin/udevcontrol reload_rules; udevtrigger The rules are parsed, applied and the permissions are then correct but why is it not doing so at boot? The file in questions I've called /etc/udev/rules.d/49-udev-override.rules and it contains KERNEL=="tty[A-Z]*", NAME="%k", GROUP="rcl", MODE="0660", OPTIONS="last_rule" the default 50-udev.rules file has been left untouched. SELinux is in permissive mode and so I can't find a reason why it is happening. Anyone have any ideas? -- James A. Peltier IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier(a)sfu.ca Website : http://www.sfu.ca/itservices http://blogs.sfu.ca/people/jpeltier

3 7

Possible to use multiple disk to bypass I/O wait?
by Emmanuel Noobadmin 16 Jun '11

16 Jun '11

I'm trying to resolve an I/O problem on a CentOS 5.6 server. The process basically scans through Maildirs, checking for space usage and quota. Because there are hundred odd user folders and several 10s of thousands of small files, this sends the I/O wait % way high. The server hits a very high load level and stops responding to other requests until the crawl is done. I am wondering if I add another disk and symlink the sub-directories to that, would that free up the server to respond to other requests despite the wait on that disk? Alternatively, if I mdraid mirror the existing disk, would md be smart enough to read using the other disk while the first's tied up with the first process?

11 20

A bridge problem
by m.roth＠5-cent.us 15 Jun '11

15 Jun '11

We just went to replace the bridge/firewall services one one server with the same on another. It's pretty simple, and I literally cloned (w/ rsync) a third server that does this onto the one that will be the new one. Then copied the /etc/sysconfig/iptables from the one being replaced, and brought it up this morning. Nope. We had to put everything back the way it was. The new one sees the two or three servers behind the firewall, and we can ping them, from the new box. On one, we see IPP broadcasts; in fact, we see lots of broadcast packets using tcpdump. From outside, though, you can't see the servers. Trying to ping them, they see nothing. It seems to be the case that tcp and icmp packets are blocked, and we can't figure out why. CentOS 5.6. ifcfg-eth0 DEVICE=eth0 BRIDGE=br3 BOOTPROTO=dhcp HWADDR=aa:bb:cc:dd:ee:ff ONBOOT=yes ifcfg-eth1 DEVICE=eth1 BRIDGE=br3 HWADDR=aa:bb:cc:dd:ee:gg ONBOOT=yes ifcfg-br3 DEVICE=br3 ONBOOT=yes TYPE=Bridge BOOTPROTO=static IPADDR=<our ip> NETMASK=255.255.254.0 NETWORK=<our nw> GATEWAY=<our gw> Any ideas? mark

7 9

Re: [CentOS] CentOS-announce Digest, Vol 76, Issue 4
by Les Mikesell 15 Jun '11

15 Jun '11

Are the updates supposed to be synced to the mirrors before the announce message goes out? Only a random few machines could get these updates yesterday. Also, is there some reason behind the package name/numbering going from: java-1.6.0-openjdk-1.6.0.0-1.21.b17.el5 to java-1.6.0-openjdk.x86_64 1:1.6.0.0-1.22.1.9.8.el5_6 ? -- Les Mikesell lesmikesell(a)gmail.com

3 3

Re: [CentOS] Dell openmanage srvadmin on 5.6
by Roy Trubshaw 15 Jun '11

15 Jun '11

Kevin wrote: > I'm just trying to get Dell openmanage to run on my Centos 5.6 > box. The monitoring [ Snipped ] > > Can anyone point me at a suitable rpm, or do I have to resort to > compiling it? Surely I'm not > the only one trying to do this. > > -- > Kevin Thorpe This is my fault. I enabled the 'priority' plugin as a short-term fix because we have a lot of repositories and I wasn't entirely sure which ones could be discarded. The dell-omsa repo seems to have lost its priority=1 line and the plugin seems to assume priority=<bignumber> and thus the dell repo was being excluded. Added the priority=1 line and everything installed OK. (Yes I will tell him as he sits opposite me but the list deserved to know the answer too.) -- Roy

1 0

leaving ports open for tftp
by Tim Dunphy 14 Jun '11

14 Jun '11

hey guys, I have a really silly question for you! I just built a cobbler server that I am using to bare metal some boxes. But I am a bit n00b and need to figure out which ports to open in iptables. Here's a start: xinetd 2031 root 8u IPv4 94306 UDP *:tftp in.tftpd 9203 root cwd DIR 253,0 4096 588097 /tftpboot in.tftpd 9203 root rtd DIR 253,0 4096 2 / in.tftpd 9203 root txt REG 253,0 39544 1813945 /usr/sbin/in.tftpd in.tftpd 9203 root mem REG 253,0 139504 1698969 /lib64/ld-2.5.so in.tftpd 9203 root mem REG 253,0 1722304 1698999 /lib64/libc-2.5.so in.tftpd 9203 root mem REG 253,0 37368 1699127 /lib64/libwrap.so.0.7.6 in.tftpd 9203 root mem REG 253,0 114352 1699014 /lib64/libnsl-2.5.so in.tftpd 9203 root mem REG 253,0 53880 1698970 /lib64/libnss_files-2.5.so in.tftpd 9203 root 0u IPv4 94306 UDP *:tftp I think what I want is the 6th column but I am uncertain of how to express that in terms of iptables. Thanks! tim

2 1

OT: clear error from premature disk removal from LVM
by Keith Keller 14 Jun '11

14 Jun '11

Hi all, This question is only slightly ontopic, in that the host system is a CentOS 5 box, but is otherwise a fairly generic question. I've looked in so many different places for an answer, but haven't had much luck, so I'm hoping someone here has some advice. (for the record: I posted this question to comp.os.linux.misc a few weeks ago) === I made a minor mistake recently, and am trying to determine the cleanest way to clear it. Attached to my hardware RAID controller were two RAID6 units. One was the original disks that came with the server, which originally hosted our data, but had since had all its data migrated to a new LVM PV. The other is newer disks with a new PV, VG, and LV. For testing purposes, after completing the pvmove I created a clean, new LV on the unit containing the old disks. (I believe that I actually destroyed the original RAID6 array and created a new one.) Unfortunately, I completely forgot about this LV during a recent hardware upgrade, and didn't run through the LVM steps to completely remove an unused physical volume before removing these old disks. (At least the LV was not mounted at the time). Now LVM seems to be confused about the disks and volumes that are available, and the kernel may also be confused. Taken from a recent reboot, here's the dmesg log entry for the old testing unit: sd 1:0:2:0: Attached scsi disk sdc Later on, I removed the disks through the controller's tools, replaced them with new ones (so this is the third set of disks), and created a new RAID6 unit. After making the new unit I see (among other messages which don't seem helpful): May 19 16:27:28 xxxx kernel: sd 1:0:2:0: Attached scsi disk sdd Later on, when trying to run parted or friends, I see messages like so: May 23 11:22:47 xxxx kernel: scsi 1:0:2:0: rejecting I/O to dead device (note the same scsi address as sdc?) And pvdisplay says: # pvdisplay /dev/testVG/testLV: read failed after 0 of 4096 at 0: Input/output error That looks bad--it seems like testLV is trying to find the old LVM on /dev/sdc, but the array on sdd is there instead. Worse, I fear that trying to manipulate sdd may cause problems in the future, so am wary of doing anything with it before I clear up this issue. What should my next steps be? I've seen recommendations (in other somewhat similar situations) to try an lvscan or vgscan to refresh the list of volumes; or to try vgreduce --removemissing to remove the now-gone volumes from what LVM thinks is there. I do also still have the original disks, which I could put back and try to get LVM to re-find, but would be a pain. I am hoping to avoid a reboot, since the current LV seems unaffected and is in use, but I can do it if it's the surest way to make sure my LVM configuration is clean. I should point out that I do not care at all about the data on testLV; all I want to do is cleanly tell LVM not to worry about that volume any more, and be in a position to use the third set of disks safely and reliably. Thanks for reading--I hope you can help. --keith -- kkeller(a)wombat.san-francisco.ca.us

1 0

Compiling PHP and MySQL
by Dvorkin, Asya 14 Jun '11

14 Jun '11

Hi everyone, I need to install an older version of PHP - 5.2.16, which is not currently available through an official CentOS repo (as far as I can tell). In order to fulfill our developer's requirements, I've decided to just compile PHP and MySql from the source. Is there a way to find out what are the usual configure options that are used to compile binaries that are available through yum? Thank you! Asya

7 12

Dell openmanage srvadmin on 5.6
by Kevin Thorpe 14 Jun '11

14 Jun '11

Hi all, I'm just trying to get Dell openmanage to run on my Centos 5.6 box. The monitoring stuff appears to have installed but the web server stuff is complaining it needs openwsman 2.2.3 or later and I can only find that for RHEL/Centos 6, not 5. Can anyone point me at a suitable rpm, or do I have to resort to compiling it? Surely I'm not the only one trying to do this. -- Kevin Thorpe

3 6

Bash rotating tab completion with list
by Dotan Cohen 14 Jun '11

14 Jun '11

I just got off a Windows 7 terminal which has rotating tab completion, this means that in the case of completion ambiguity the shell completes one of the possibilities, and subsequent tabs complete to different possibilities. This in contrast to bash's behaviour of simply printing a list of possibilities. Googling I have found that bash can in fact have rotating completion by setting "\C-i": menu-complete. However, I would really like the first tab to show the possibilities (default behaviour, albeit on the second tab), and subsequent tabs to rotate. I can't figure this out. Any ideas? Thanks! -- Dotan Cohen http://gibberish.co.il http://what-is-what.com

2 4

Recall: EXTERNAL: A bridge problem
by Massey, Ricky 14 Jun '11

14 Jun '11

Massey, Ricky would like to recall the message, "EXTERNAL: [CentOS] A bridge problem".

4 3

Unable to grep 5 mins logs
by ankush grover 14 Jun '11

14 Jun '11

Hi Friends! I need to prepare a script which will grep logs from the current time to previous 5 mins that is if the current time is Mon Jun 13 12:40:40 IST 2011 then all the logs between the interval Mon Jun 12:35 - 12:40 2011 should be grepped by the script and append it to another file. However, the below script is not able to grep the desired logs, so I need some help in preparing the script. I am running Centos 5.2 32-bit. for (( i = 5; i >=0; i-- )) ; do grep $(date "+%a %b %d %R %Y" -d "-$i min") /var/ossec/logs/active-responses.log >> /tmp/newlog.log;done /var/ossec/logs/active-responses.log format is below Fri Jun 3 15:38:14 IST 2011 /var/ossec/active-response/bin/host-deny.sh add - 172.31.5.12 1307095694.71353 31151 Fri Jun 3 15:38:14 IST 2011 /var/ossec/active-response/bin/firewall-drop.sh add - 172.31.5.12 1307095694.71353 31151 Thanks & Regards Ankush

3 5

What is someone trying to do?
by Jason 14 Jun '11

14 Jun '11

Hi All, My Logwatch was very long today with 404 requests to the Apache server. I dont understand what the person was trying to do by what they were attempting to access. Can anyone explain a method to their madness? The whole things seems weird... Below -Jason ------ Requests with error response codes 404 Not Found /!document.body: 1 Time(s) /.exec: 1 Time(s) /.google-analytics.com/ga.js (http://google-analytics.com/ga.js) 1 Time(s) /.player.play: 1 Time(s) /J.cur: 1 Time(s) /Math.pow: 1 Time(s) /VideoJS.isIE: 1 Time(s) /a: 2 Time(s) /apple-touch-icon-precomposed.png: 2 Time(s) /apple-touch-icon.png: 2 Time(s) /blue_bg.png: 1 Time(s) /event.type: 1 Time(s) /favicon.ico: 4 Time(s) /fn.call: 1 Time(s) /lib/flash/mediaroom/video/apple_history/t ... nerds_part1.mp4: 1 Time(s) /lib/flash/mediaroom/video/apple_history/w ... o_macintosh.mp4: 1 Time(s) /lib/js/!==location.host: 1 Time(s) /lib/js/!Fa.test: 1 Time(s) /lib/js/!b.orig: 1 Time(s) /lib/js/!c.data: 1 Time(s) /lib/js/!d.guid: 1 Time(s) /lib/js/!h.guid: 1 Time(s) /lib/js/!h.handler.guid: 1 Time(s) /lib/js/!ia.test: 1 Time(s) /lib/js/!s&&!x.test: 1 Time(s) /lib/js/!t.body: 1 Time(s) /lib/js/$.exec: 1 Time(s) /lib/js/%25d;c.data: 1 Time(s) /lib/js/&&!/!=/.test: 1 Time(s) /lib/js/&&!Ca.test: 1 Time(s) /lib/js/&&!F.call: 1 Time(s) /lib/js/&&!eb.test: 1 Time(s) /lib/js/&&!o.match.ID.test: 1 Time(s) /lib/js/&&!s&&t.body: 1 Time(s) /lib/js/&&$a.test: 1 Time(s) /lib/js/&&Da.test: 1 Time(s) /lib/js/&&Ua.test: 1 Time(s) /lib/js/&&c.css: 1 Time(s) /lib/js/&&c.data: 1 Time(s) /lib/js/&&c.timers.push: 1 Time(s) /lib/js/&&e.old.call: 1 Time(s) /lib/js/&&jb.test: 1 Time(s) /lib/js/&&ta.test: 1 Time(s) /lib/js/+a.guid: 1 Time(s) /lib/js/+c.now: 1 Time(s) /lib/js/,I=J.cur: 1 Time(s) /lib/js/,N.call: 1 Time(s) /lib/js/,a.now: 1 Time(s) /lib/js/,b.find: 1 Time(s) /lib/js/,d=b.css: 1 Time(s) /lib/js/,e=Ia.test: 1 Time(s) /lib/js/,e=d.html: 1 Time(s) /lib/js/,f=c.data: 1 Time(s) /lib/js/,k=c.css: 1 Time(s) /lib/js/,l=c.css: 1 Time(s) /lib/js/,l=qb.test: 1 Time(s) /lib/js/,w=c.data: 1 Time(s) /lib/js/-1?c.map: 1 Time(s) /lib/js/-Math.cos: 1 Time(s) /lib/js/.length,style:/red/.test: 1 Time(s) /lib/js/0&&n.exec: 1 Time(s) /lib/js/0,a.now: 1 Time(s) /lib/js/0?this.bind: 1 Time(s) /lib/js/1&&i.nodeType===9&&!O&&o.match.ID.test: 1 Time(s) /lib/js/1&&x.exec: 1 Time(s) /lib/js/512&&b===t&&!Ca.test: 1 Time(s) /lib/js/:Ja.test: 1 Time(s) /lib/js/:O.call: 1 Time(s) /lib/js/:a.now: 1 Time(s) /lib/js/:c.css: 1 Time(s) /lib/js/:c.data: 1 Time(s) /lib/js/:c.each: 1 Time(s) /lib/js/:f.css: 1 Time(s) /lib/js/:this.die: 1 Time(s) /lib/js/:w.open: 1 Time(s) /lib/js/;Za.test: 1 Time(s) /lib/js/;b.each: 1 Time(s) /lib/js/;b.map: 1 Time(s) /lib/js/;c.curCSS=c.css;c.each: 1 Time(s) /lib/js/;c.data: 1 Time(s) /lib/js/;c.each: 1 Time(s) /lib/js/;c.event.add: 1 Time(s) /lib/js/;d&&h.each: 1 Time(s) /lib/js/;d.filter=Ea.test: 1 Time(s) /lib/js/;d.text: 1 Time(s) /lib/js/;e.call: 1 Time(s) /lib/js/;f.className=c.trim: 1 Time(s) /lib/js/;f=c.data: 1 Time(s) /lib/js/;h.html: 1 Time(s) /lib/js/;j=L.exec: 1 Time(s) /lib/js/;o+=Math.max: 1 Time(s) /lib/js/;r.remove&&r.remove.call: 1 Time(s) /lib/js/;this.each: 1 Time(s) /lib/js/;this.options.complete.call: 1 Time(s) /lib/js/;v!==H&&z.push: 1 Time(s) /lib/js/===a.type?f.push: 1 Time(s) /lib/js/Ba.exec: 1 Time(s) /lib/js/C.add: 1 Time(s) /lib/js/C.push: 1 Time(s) /lib/js/C.test: 1 Time(s) /lib/js/D.pop: 1 Time(s) /lib/js/Fa.test: 1 Time(s) /lib/js/G&&s.call: 1 Time(s) /lib/js/Na.test: 1 Time(s) /lib/js/T.test: 1 Time(s) /lib/js/a&&a.type: 1 Time(s) /lib/js/a,b,this.handle.elem: 1 Time(s) /lib/js/a.call: 1 Time(s) /lib/js/a.nodeType===1&&a!==b&&d.push: 1 Time(s) /lib/js/a.style.display=c.data: 1 Time(s) /lib/js/b&&b.type: 1 Time(s) /lib/js/b.beforeSend&&b.beforeSend.call: 1 Time(s) /lib/js/b.data: 1 Time(s) /lib/js/b.data&&T.test: 1 Time(s) /lib/js/b.map: 1 Time(s) /lib/js/b.type: 1 Time(s) /lib/js/b.url: 1 Time(s) /lib/js/b.url;if(!d)%7Bvar: 1 Time(s) /lib/js/b===b.ownerDocument.body: 1 Time(s) /lib/js/b=b.call: 1 Time(s) /lib/js/c.css: 1 Time(s) /lib/js/c.data: 1 Time(s) /lib/js/c.each: 1 Time(s) /lib/js/c.event.add: 1 Time(s) /lib/js/c.offset.doesAddBorderForTableAndCells&&xb.test: 1 Time(s) /lib/js/d.call: 1 Time(s) /lib/js/d.exec: 1 Time(s) /lib/js/d.guid===C.guid: 1 Time(s) /lib/js/d.push: 1 Time(s) /lib/js/d=k.set: 1 Time(s) /lib/js/e.call: 1 Time(s) /lib/js/e.old: 1 Time(s) /lib/js/e.push: 1 Time(s) /lib/js/e=c.data: 1 Time(s) /lib/js/e=d.nodeType?c.data: 1 Time(s) /lib/js/e=h.get: 1 Time(s) /lib/js/f,a,bb.call: 1 Time(s) /lib/js/f.call: 1 Time(s) /lib/js/f.push: 1 Time(s) /lib/js/f=k.get: 1 Time(s) /lib/js/function(i)%7Breturn%20i.getAttrib ... %20class='TEST': 1 Time(s) /lib/js/h.html: 1 Time(s) /lib/js/h=c.data: 1 Time(s) /lib/js/j.call: 1 Time(s) /lib/js/ja.test: 1 Time(s) /lib/js/m.push: 1 Time(s) /lib/js/n.push: 1 Time(s) /lib/js/o.match.POS.test: 1 Time(s) /lib/js/o=sb.exec: 1 Time(s) /lib/js/q.expr,q.set: 1 Time(s) /lib/js/q=D.pop: 1 Time(s) /lib/js/q=d.exec: 1 Time(s) /lib/js/r=c.map: 1 Time(s) /lib/js/s.call: 1 Time(s) /lib/js/ta.test: 1 Time(s) /lib/js/this,a,b,true,c.attr: 1 Time(s) /lib/js/this,b,d.text: 1 Time(s) /lib/js/this,f,h.attr: 1 Time(s) /lib/js/this,f,h.html: 1 Time(s) /lib/js/this,o,x.attr: 1 Time(s) /lib/js/this,o,x.val: 1 Time(s) /lib/js/this,x,b?r.html: 1 Time(s) /lib/js/this,x,r.attr: 1 Time(s) /lib/js/this.cur: 1 Time(s) /lib/js/this.elem: 1 Time(s) /lib/js/this.elem,this.prop: 1 Time(s) /lib/js/this.find: 1 Time(s) /lib/js/this.get: 1 Time(s) /lib/js/this.one: 1 Time(s) /lib/js/this.type: 1 Time(s) /lib/js/v=h.exec: 1 Time(s) /lib/js/vb.test: 1 Time(s) /lib/js/w,b.url: 1 Time(s) /lib/js/x.val: 1 Time(s) /lib/js/z=A.exec: 1 Time(s) /mediaroom/%E2%80%8Bvideo/%E2%80%8Bkeynote ... cworld_2000.mp4: 1 Time(s) /mediaroom/audio/quarterly_earnings_calls/ ... frame-stamp.png: 1 Time(s) /mediaroom/video/keynotes/expo_paris_2002/keyframe-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/expo_paris_2003/keyframe-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/macworld_1998/ne ... frame-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/macworld_1999/to ... frame-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/macworld_2002/ne ... frame-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/seybold_1999/keyframe-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/wwdc_2010/keyframe-stamp.jpg: 1 Time(s) /mediaroom/video/keynotes/wwdc_2011/introd ... frame-stamp.jpg: 1 Time(s) /mediaroom/video/people/steve_jobs/d8/keyframe-stamp.jpg: 1 Time(s) /num*Math.pow: 1 Time(s) /robots.txt: 5 Time(s) /this.currentSubtitle.text: 1 Time(s)

7 14

Re: [CentOS] Vim scripting - cursor motion
by flapeccino＠gmail.com 14 Jun '11

14 Jun '11

Jussi There is a good article on vimscript here: http://www.ibm.com/developerworks/linux/library/l-vimscript-1/index.html) Sent via BlackBerry by AT&T

6 10

CentOS 5.6 - Samba server + Windows error 233
by Guy Boisvert 14 Jun '11

14 Jun '11

Hi! I have upgraded my servers yesterday to CentOS 5.6 via yum update. Everything went smoothly except that i have client workstations not part of the domain that are not able to access the samba server anymore. The samba server is part of the domain. We recently added Windows 2008 R2 DC. Everything was working smoothly until the CentOS update. I had a Win7 Workstation that i had success connecting when using the "net use" command: net use g: \\sambaserver\share /user:domain\username The mapping worked right away and didn't even asked for the password. Normally, before the CentOS upgrade, i'd put \\sambaserver in the UNC line of the Windows Explorer and i'd get a box asking for credentials. Entering "domain\username" as user and giving the password in the password line was working. Not anymore. I have another XP workstation on another subnet (router wide open) and the mapping with the command line as specified above doesn't even work. For this subnet, i have to use the IP address because the workstations on it use a DNS which isn't aware or active directory (and cannot change this). samba-3.0.33-3.29.el5_6.2 samba-common-3.0.33-3.29.el5_6.2 Here is my smb.conf: =================== [global] workgroup = DOMAINNAME realm = DOMAINNAME.COM server string = Servername File Server socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 security = ADS encrypt passwords = yes passdb backend = tdbsam password server = * preferred master = No local master = No domain master = No cups options = raw hosts allow = 10.0.2., 10.0.3., 127., 10.0.4.40 pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *New*Password* %n\n *Re-enter*new*password*%n\n *Password*changed* username map = /etc/samba/smbusers unix password sync = Yes log level = 1 syslog = 0 log file = /var/log/samba/%m max log size = 50 smb ports = 139 name resolve order = bcast hosts time server = Yes printcap name = CUPS show add printer wizard = No add user script = /usr/sbin/useradd -m '%u' delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' add machine script = /usr/sbin/useradd -s /bin/false -d /tmp '%u' shutdown script = /var/lib/samba/scripts/shutdown.sh abort shutdown script = /sbin/shutdown -c # separate domain and username with '\', like DOMAIN\username winbind separator =+ # use uids from 10000 to 20000 for domain users idmap uid = 10000-20000 # use gids from 10000 to 20000 for domain groups idmap gid = 10000-20000 # allow enumeration of winbind users and groups winbind enum users = yes [homes] comment = Home Directories read only = No browseable = No writable = yes [Videotheque] comment = Fichiers MPEG2 path = /home/Samba/Videotheque read only = No available = Yes public = Yes writable = yes admin users = domainname+user1,domainname+user2,domainname+user3 TIA, Guy Boisvert

2 3

Re: [CentOS] Issue with Perl and rpmforge - advice? - SOLVED
by Mark 13 Jun '11

13 Jun '11

On Wed, Sep 1, 2010 at 6:51 PM, Mark <mhullrich(a)gmail.com> wrote: > I have an old version of rkhunter installed on my CentOS 5 machine, > one I got from rpmforge. > > In my most recent attempts to update this, I get the following errors in yum: > : > --> Finished Dependency Resolution > perl-AnyEvent-5.240-1.el5.rf.noarch from rpmforge has depsolving problems > --> Missing Dependency: perl(Net::SSLeay) >= 1.33 is needed by > package perl-AnyEvent-5.240-1.el5.rf.noarch (rpmforge) > Error: Missing Dependency: perl(Net::SSLeay) >= 1.33 is needed by > package perl-AnyEvent-5.240-1.el5.rf.noarch (rpmforge) The solution (from the rpmforge users list) was to exclude perl-AnyEvent. Just thought you should know.... Mark

4 4

CentOS-announce Digest, Vol 76, Issue 4
by centos-announce-request＠centos.org 13 Jun '11

13 Jun '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2011:0863 CentOS 5 i386 perl Update (Karanbir Singh) 2. CEBA-2011:0863 CentOS 5 x86_64 perl Update (Karanbir Singh) 3. CESA-2011:0857 Important CentOS 5 i386 java-1.6.0-openjdk Update (Karanbir Singh) 4. CESA-2011:0857 Important CentOS 5 x86_64 java-1.6.0-openjdk Update (Karanbir Singh) 5. CEBA-2011:0864 CentOS 5 x86_64 device-mapper-multipath Update (Karanbir Singh) 6. CEBA-2011:0864 CentOS 5 i386 device-mapper-multipath Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 13 Jun 2011 12:41:56 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0863 CentOS 5 i386 perl Update To: centos-announce(a)centos.org Message-ID: <20110613124156.GA15116(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0863 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0863.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 1f51e7aa5acb5a58357b2a1974f0ecb0 perl-5.8.8-32.el5_6.3.i386.rpm cb2dc1bdf4b2e647d9a1201a120efe4e perl-suidperl-5.8.8-32.el5_6.3.i386.rpm Source: 7f6c9d31b3fe29b8f0f5b5f4fe014cc1 perl-5.8.8-32.el5_6.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 13 Jun 2011 12:41:56 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0863 CentOS 5 x86_64 perl Update To: centos-announce(a)centos.org Message-ID: <20110613124156.GA15129(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0863 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0863.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: b4f301ef49a8319848423f1b47a8f381 perl-5.8.8-32.el5_6.3.x86_64.rpm 31e8f606daa957e2f9f3c68b2effd81b perl-suidperl-5.8.8-32.el5_6.3.x86_64.rpm Source: 7f6c9d31b3fe29b8f0f5b5f4fe014cc1 perl-5.8.8-32.el5_6.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 13 Jun 2011 14:03:30 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0857 Important CentOS 5 i386 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20110613140330.GA15667(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0857 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0857.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 0c7e4332b338ee6fa02d98e73c5d0916 java-1.6.0-openjdk-1.6.0.0-1.22.1.9.8.el5_6.i386.rpm 3da02424f37511020cb84d00c1ffe222 java-1.6.0-openjdk-demo-1.6.0.0-1.22.1.9.8.el5_6.i386.rpm 3b74ea7ee59e65ff495cd627b4b9a876 java-1.6.0-openjdk-devel-1.6.0.0-1.22.1.9.8.el5_6.i386.rpm c3194e504a6e1a7e2029344e1d4f890c java-1.6.0-openjdk-javadoc-1.6.0.0-1.22.1.9.8.el5_6.i386.rpm 8a93db89ed746ed9516e76fb8bb97f5f java-1.6.0-openjdk-src-1.6.0.0-1.22.1.9.8.el5_6.i386.rpm Source: 11942b42b056cb709f8644875ae6c15c java-1.6.0-openjdk-1.6.0.0-1.22.1.9.8.el5_6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 13 Jun 2011 14:03:30 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0857 Important CentOS 5 x86_64 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20110613140330.GA15684(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0857 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0857.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: e46ca904be3f4e4dfa0bd89e0547e85c java-1.6.0-openjdk-1.6.0.0-1.22.1.9.8.el5_6.x86_64.rpm e66fa34bf50ce2065108ff3dad7193a8 java-1.6.0-openjdk-demo-1.6.0.0-1.22.1.9.8.el5_6.x86_64.rpm 85a1751a85bea760778c73a92613fde2 java-1.6.0-openjdk-devel-1.6.0.0-1.22.1.9.8.el5_6.x86_64.rpm dc8ded115a79b3279b7d71643e4305a7 java-1.6.0-openjdk-javadoc-1.6.0.0-1.22.1.9.8.el5_6.x86_64.rpm e706ac31700f63351d6707d5c79ee145 java-1.6.0-openjdk-src-1.6.0.0-1.22.1.9.8.el5_6.x86_64.rpm Source: 11942b42b056cb709f8644875ae6c15c java-1.6.0-openjdk-1.6.0.0-1.22.1.9.8.el5_6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 13 Jun 2011 14:08:56 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0864 CentOS 5 x86_64 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20110613140856.GA15816(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0864 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0864.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 0746729cf48a756ca5bab739340f6cd1 device-mapper-multipath-0.4.7-42.el5_6.3.x86_64.rpm 349f6e15f237762b8891d0f4dc9083ed kpartx-0.4.7-42.el5_6.3.x86_64.rpm Source: 596b4d5493367f1dd1df3901939aef68 device-mapper-multipath-0.4.7-42.el5_6.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 13 Jun 2011 14:08:56 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0864 CentOS 5 i386 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20110613140856.GA15802(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0864 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0864.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 29a393d568643fa54834cd84a6607316 device-mapper-multipath-0.4.7-42.el5_6.3.i386.rpm cf85e72a45a1455adda377137c2efb9d kpartx-0.4.7-42.el5_6.3.i386.rpm Source: 596b4d5493367f1dd1df3901939aef68 device-mapper-multipath-0.4.7-42.el5_6.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 76, Issue 4 **********************************************

1 0

flash and konqueror
by m.roth＠5-cent.us 12 Jun '11

12 Jun '11

I am stuck taking this stupid online training course from work. It just sits there doing nothing with firefox, so I pulled up konqueror, and tell it to lie and say it's IE. That works... until it gets to the content, which some HR moron is *positive* desperately needs to be in flash. I've gone into konqi's configuration, and told it to scan the correct directory for plugins, and yet a) I see no easy way to find out what plugins are installed, and b) it can't seem to see libflashplayer.so. Clues for the poor? mark

6 8

apr-util-pgsql
by Alexander Farber 12 Jun '11

12 Jun '11

Hello, does anybody know of a good source for a apr-util-pgsql rpm package for CentOS 5.6 / 64 bit and even more I'm curious why isn't it included but the apr-util-mysql is included... Thank you Alex

3 3

C6 LiveCD top 5 apps
by nux＠li.nux.ro 12 Jun '11

12 Jun '11

Regarding http://twitter.com/CentOS/statuses/79336297579282432 I don't have a twitter account so I'm spamming the list since it looks on topic :) I'd like to see on the LiveCD the following: 1. latest dd_rescue 2. latest gparted 3. ntfs-3g 4. screen 5. mc How about you? -- Nux! www.nux.ro

10 14

ultrasecure sshd server
by Eero Volotinen 11 Jun '11

11 Jun '11

Hi, How to configure sshd to required both ssh public key and user password also? yes, stupid, but required on my setup.. -- Eero

14 30

Re: [CentOS] Vim scripting - cursor motion
by flapeccino＠gmail.com 10 Jun '11

10 Jun '11

Sorry there was a typo, the correct URL is: http://www.ibm.com/developerworks/linux/library/l-vim-script-1/index.html Sent via BlackBerry by AT&T -----Original Message----- From: flapeccino(a)gmail.com Date: Fri, 10 Jun 2011 15:39:12 To: CentOS mailing list<centos(a)centos.org> Reply-To: flapeccino(a)gmail.com Subject: Re: [CentOS] Vim scripting - cursor motion Jussi There is a good article on vimscript here: http://www.ibm.com/developerworks/linux/library/l-vimscript-1/index.html) Sent via BlackBerry by AT&T

1 0

pam_succeed_if
by Daniel De Marco 10 Jun '11

10 Jun '11

Hi, The default system-auth file for PAM on CentOS has the following auth section: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so What's the use of the pam_succeed_if line? It will only be reached if the pam_unix doesn't succeed and from my understanding it will prevent system accounts from logging in. Is it useless or am I missing something? Thanks, Daniel.

3 3

Cloning LVM
by Christopher Hearn 10 Jun '11

10 Jun '11

I have a workstation with two separate drives set up with LVM. I'm buying an LSI RAID controller to set up mirrored drives. I'd like to clone the existing drives over to the new mirrored drives somehow, but not sure the best way to do it. The original drives & their respective replacements are all identical in size (250GB + 1TB). I thought about using Clonezilla but wasn't sure how LVM would handle the /dev devices changing. Any suggestions? Thanks, Chris

3 3

Vim scripting - cursor motion
by Jussi Hirvi 10 Jun '11

10 Jun '11

I am working on my first vim script. The script is supposed to do some find/replace on a file, then save the file with a new name and quit vim. I will save the script in a file and then call it from a bash script like this: vim path-to-the-file -s path-to-my-script Maybe I have not found the right resources. I can find/replace with expressions that are similar to those I use manually, for example: :% s/\t/","/g Then I should add something to the beginning of file (line 1, char 1). And append something to the end of the file (last line, last char). But I cannot find a way to do this. Should I move the cursor (and how?), or what? - Jussi

7 8

High system load but low cpu usage
by Emmanuel Noobadmin 10 Jun '11

10 Jun '11

I'm trying to figure out what's causing an average system load of 3+ to 5+ on an Intel quad core. The server has with 2 KVM guests (assigned 1 core and 2 cores) that's lightly loaded (0.1~0.4) each. Both guest/host are running 64bit CentOS 5.6 Originally I suspected maybe it's i/o but on checking, there is very little i/o wait % as well. Plenty of free disk space available on all physical drives and memory sufficient for the usage with barely any swap in use. While performance/responsiveness of the host and guests doesn't seem to be affected, I'm still concerned about this odd load figures. Would appreciate it if anybody can suggest what else I should be looking at? Output of various commands on the host: Top === top - 15:15:39 up 5 days, 8:48, 1 user, load average: 4.76, 4.18, 4.43 Tasks: 210 total, 1 running, 209 sleeping, 0 stopped, 0 zombie Cpu(s): 4.1%us, 2.5%sy, 0.0%ni, 76.4%id, 17.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 3759496k total, 2813076k used, 946420k free, 357300k buffers Swap: 8193016k total, 5648k used, 8187368k free, 736640k cached free -m ====== total used free shared buffers cached Mem: 3671 2750 921 0 348 719 -/+ buffers/cache: 1682 1989 Swap: 8000 5 7995 vmstat 3 ====== procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 5648 949072 357096 735788 0 0 105 50 17 22 2 1 95 1 0 0 0 5648 949428 357104 735788 0 0 44 2682 14142 14697 6 4 84 6 0 0 0 5648 949304 357104 735788 0 0 1 324 14047 14753 2 1 96 1 0 1 1 5648 946916 357104 735788 0 0 0 215 14410 14496 2 2 90 6 0 0 0 5648 946520 357104 735788 0 0 23 267 13703 14664 2 2 91 6 0 sar === 02:40:01 PM CPU %user %nice %system %iowait %steal %idle 02:50:01 PM all 2.17 0.00 2.18 4.30 0.00 91.35 03:00:01 PM all 2.47 0.00 2.23 3.57 0.00 91.73 03:10:01 PM all 2.29 0.00 2.07 3.77 0.00 91.87 03:20:01 PM all 2.63 0.00 2.07 3.28 0.00 92.03 Average: all 2.39 0.00 1.95 4.77 0.00 90.89

8 8

Revisor
by Deivison Moraes 10 Jun '11

10 Jun '11

Hello,some of youare familiar withtherevisor,andcanhelp me withit? I wonderif therevisorishowtopick,withtheCentOSinstalledonlyintext modealsoworks, andalsoI'm having someproblems withpackagedependenciesare missing somepackagesto installtherevisorbut stillcan not find... Error:MissingDependency: python(abi)>=2.4isneededbypackagereviewer Error:MissingDependency:pykickstartis needed bypackagereviewer Error:MissingDependency: python(abi)=2.4isneededbypackagereviewer Error:MissingDependency:yum>=3isneededbypackagereviewer Error:MissingDependency:squashfs-toolspackageisneededbyreviewer Error:MissingDependency:notify-pythonis needed bypackagereviewer Grateful -- Deivison Moraes

12 29

NTLM auth fails after upgrade to centos 5.6
by Tom Diehl 09 Jun '11

09 Jun '11

Hi, I upgraded a working centos5.5 with squid using ntlm auth to centos 5.6 today. After doing so squid failed to authenticate. Downgrading samba3x to samba3x-3.3.8-0.52.el5_5.2 got things working again. In the squid config I have, auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp in the squid config and this was working until the upgrade. testparm shows no errors and the logs do not indicate a problem except that authentication fails. With samba3x-3.5.4-0.70.el5_6.1.x86_64 installed the following command fails: /usr/bin/ntlm_auth --username=myuser with the following error: [2011/06/09 10:21:19.538041, 2] winbindd/winbindd_pam.c:2001(winbindd_dual_pam_auth_crap) NTLM CRAP authentication for user [mydomain]\[myuser] returned NT_STATUS_INVALID_HANDLE (PAM: 4) with samba3x-3.3.8-0.52.el5_5.2 I get the following: (indy pts3) # /usr/bin/ntlm_auth --username=myuser password: NT_STATUS_OK: Success (0x0) (indy pts3) # [2011/06/09 18:18:30, 2] passdb/pdb_ldap.c:init_sam_from_ldap(571) init_sam_from_ldap: Entry found for user: myuser [2011/06/09 18:18:30, 2] auth/auth.c:check_ntlm_password(308) check_ntlm_password: authentication for user [myuser] -> [myuser] -> [myuser] succeeded Has anyone else seen this behavior? Regards, -- Tom Diehl tdiehl(a)rogueind.com Spamtrap address mtd123(a)rogueind.com

1 0

Re: [CentOS] Looking for gfs2-kmod SRPM
by centoslistbrian＠nym.hush.com 09 Jun '11

09 Jun '11

This is kind of figured out now. The actual RPM I'm using is from the debuginfo repo here: http://debuginfo.centos.org/5/x86_64/gfs2-kmod-debuginfo-1.92-1.1.el5_2.2.x… The contents of the RPM are identical to the RedHat RPM: http://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/x86_64/Debu… The problem here is that the source included in the debuginfo RPM does not match the binary. When running the binary, I get "f:q" in my gfs2_tool lockdump output, which definitely cannot happen given the source code in the RPM. It appears that this patch has been applied during compilation. https://www.redhat.com/archives/cluster-devel/2011-May/msg00037.html But the patch is not applied to the source code included. Clearly this is not a CentOS issue as the RedHat RPM is wrong too, so this is just informational to close out the issue. Brian On 11-06-2011 at 2:05 AM, John Doe <jdmls(a)yahoo.com> wrote: > >From: "centoslistbrian(a)nym.hush.com" <centoslistbrian(a)nym.hush.com> > >> I'm searching for the SRPM corresponding to this installed RPM. >> % yum list | grep gfs2 >> gfs2-kmod-debuginfo.x86_64 1.92-1.1.el5_2.2 >> It is missing from: >> http://msync.centos.org/centos-5/5/os/SRPMS/ > >How can you expect to find a CentOS srpm for a package that does >not come from CentOS...? >As you can see, http://msync.centos.org/centos-5/5/os/i386/CentOS/ >only lists gfs2-utils > >JD >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] Possible to use multiple disk to bypass I/O wait?
by Emmanuel Noobadmin 09 Jun '11

09 Jun '11

On 6/9/11, Mathias Burén <mathias.buren(a)gmail.com> wrote: > The first thing that comes to my mind: Have you tried another IO scheduler? and the first thing that came to this noob's mind was: Wait, you mean there's actually more than one? AND I get to choose? I'll probably be experimenting with deadline and anticipatory since the i/o wait seems to be due to the disk running back and fro trying to serve the file scan as well as legit read request so having that small wait for reads in the same area sounds like it would help.

1 0

CentOS-announce Digest, Vol 76, Issue 3
by centos-announce-request＠centos.org 09 Jun '11

09 Jun '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2011:0859 Moderate CentOS 5 x86_64 cyrus-imapd Update (Karanbir Singh) 2. CESA-2011:0859 Moderate CentOS 5 i386 cyrus-imapd Update (Karanbir Singh) 3. CESA-2011:0862 Moderate CentOS 5 x86_64 subversion Update (Karanbir Singh) 4. CESA-2011:0862 Moderate CentOS 5 i386 subversion Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 8 Jun 2011 20:42:26 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0859 Moderate CentOS 5 x86_64 cyrus-imapd Update To: centos-announce(a)centos.org Message-ID: <20110608204226.GA7296(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0859 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0859.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: d37b0693363e531541c8318e89a6c6db cyrus-imapd-2.3.7-7.el5_6.4.x86_64.rpm eeac95e6cac1042ecb3da5661bcc11ea cyrus-imapd-devel-2.3.7-7.el5_6.4.i386.rpm 77294ef6fe9eef5d58e5723792422a74 cyrus-imapd-devel-2.3.7-7.el5_6.4.x86_64.rpm 0eb5d5beee6135093fbfa03622eee610 cyrus-imapd-perl-2.3.7-7.el5_6.4.x86_64.rpm b2db4fda2d3a3ecb845f8d7e5ae32c7c cyrus-imapd-utils-2.3.7-7.el5_6.4.x86_64.rpm Source: df42a3ba3d217583e6bfda46530c4184 cyrus-imapd-2.3.7-7.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 8 Jun 2011 20:42:26 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0859 Moderate CentOS 5 i386 cyrus-imapd Update To: centos-announce(a)centos.org Message-ID: <20110608204226.GA7283(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0859 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0859.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 643fcb6b921f9a497d33e3ba17e6e3fa cyrus-imapd-2.3.7-7.el5_6.4.i386.rpm e212ffb4b42601778061b885607c5923 cyrus-imapd-devel-2.3.7-7.el5_6.4.i386.rpm 02f97044ea9f5a5ce9f433073f1ca288 cyrus-imapd-perl-2.3.7-7.el5_6.4.i386.rpm 6744f92f98e7f05854d5e9eb83fecf2a cyrus-imapd-utils-2.3.7-7.el5_6.4.i386.rpm Source: df42a3ba3d217583e6bfda46530c4184 cyrus-imapd-2.3.7-7.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 8 Jun 2011 22:32:53 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0862 Moderate CentOS 5 x86_64 subversion Update To: centos-announce(a)centos.org Message-ID: <20110608223253.GA7707(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0862 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0862.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 973a6a5255be2a3006919d3874fb23d5 mod_dav_svn-1.6.11-7.el5_6.4.x86_64.rpm 5a4834151a28f065847200401c49febc subversion-1.6.11-7.el5_6.4.i386.rpm 9c9687342fa17e080283b6d52f011c4a subversion-1.6.11-7.el5_6.4.x86_64.rpm 3b211b6828fc002dadee128e154d76da subversion-devel-1.6.11-7.el5_6.4.i386.rpm ce33eb62c383b7b6ffb5bb5576c9b69e subversion-devel-1.6.11-7.el5_6.4.x86_64.rpm 166353f7df90760ed81910faa1b7fbbe subversion-javahl-1.6.11-7.el5_6.4.x86_64.rpm 2b656c4760b5c2f899470c504743fa9a subversion-perl-1.6.11-7.el5_6.4.x86_64.rpm a8cfa89bb777c5086dc228d41f790f51 subversion-ruby-1.6.11-7.el5_6.4.x86_64.rpm Source: 614a8a3175d0c28eda7c3173e647166c subversion-1.6.11-7.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 8 Jun 2011 22:32:53 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0862 Moderate CentOS 5 i386 subversion Update To: centos-announce(a)centos.org Message-ID: <20110608223253.GA7694(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0862 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0862.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: cbcd5719b1bab3b84609642bd3a04c1f mod_dav_svn-1.6.11-7.el5_6.4.i386.rpm 886f9a5c9aeeaf932889d3abcd28b546 subversion-1.6.11-7.el5_6.4.i386.rpm 5441b7259c107254e296544dc5efa6c3 subversion-devel-1.6.11-7.el5_6.4.i386.rpm 93cf5226c3dacaee83a370a42ba4a8c4 subversion-javahl-1.6.11-7.el5_6.4.i386.rpm 91f06d200316539e406bde900270cd4f subversion-perl-1.6.11-7.el5_6.4.i386.rpm 0630854485082c9e5e1f851155b7b5ca subversion-ruby-1.6.11-7.el5_6.4.i386.rpm Source: 614a8a3175d0c28eda7c3173e647166c subversion-1.6.11-7.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 76, Issue 3 **********************************************

1 0

Paypal phishing warning
by MR ZenWiz 09 Jun '11

09 Jun '11

Sorry for the cross-post, and off-topic at that, but: This morning I received a very authentic looking email from info.paypal.com, claiming that Paypal wanted me to update my browser. (Really.) It had my name in it and all the right graphics and colors and everything. Except that the from site was info.paypal.com (whoever they are: hint - not paypal.com) and the links all had long obfuscated links in them. I verified with paypal that it was not legitimate, so I though you might all be warned as well. You may now return to the appropriate technical discussions....

8 7

Looking for gfs2-kmod SRPM
by centoslistbrian＠nym.hush.com 09 Jun '11

09 Jun '11

I'm searching for the SRPM corresponding to this installed RPM. % yum list | grep gfs2 gfs2-kmod-debuginfo.x86_64 1.92-1.1.el5_2.2 It is missing from: http://msync.centos.org/centos-5/5/os/SRPMS/ What I need from the SRPM are the patches. I'm working through some issues using the source code, and the patches in the RedHat SRPM (http://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRP MS/gfs2-kmod-1.92-1.1.el5_2.2.src.rpm) seem to be slightly different. Particularly, the output from gfs2_tool lockdump shows a 'q' glock flag in CentOS, but the RedHat source does not seem to reflect that. (The lockdump output is totally changed from the original source code by the patches.) Much appreciated if anyone can help. Thanks, Brian

2 1

what is difference between "slow initialize" and "patrol read" on RAID?
by mcclnx mcc 09 Jun '11

09 Jun '11

We have DELL server with MD1000 Disk array in it. O.S. is CENTOS 5.5. Recently every time MD1000 "patrol read" start I will get "media error" messages on /var/log/message file. I use MD1000 "slow initialize" to initialize "bad disk" and NO error. After "slow initialize" finish, I manually "startup patrol read". I continue get "media error" on /var/log/message. Anyone know what difference between "slow initialize" and "patrol read"? Thanks.

5 5

daemon user can't acess file while nobody user can.
by Nicolas Ross 08 Jun '11

08 Jun '11

I have a server where /home is on a nfs. I installed an apache (my compile) server. By default, it runs as daemon. That user can't acces files in /home/*/public_html, while the nobody user can. So if I change my apache config, it now can. /home is : drwxr-xr-x /home/user is : drwxr-xr-x /home/user/public_html is : drwxr-xr-x selinux is disabled. In the error log of apache I get : (13)Permission denied: access to /~user/file.jpg denied I changed the shell for the daemon user so I can diagnose a little bit more, and I cannot get into the user directory. When on a local drive, it's ok. So why is that the daemon user cannot go into the user directory via nfs ?

2 1

Changing from RHEL to CentOS
by John J. Boyer 08 Jun '11

08 Jun '11

I have a RHEL system and I'm thinking of changing to CentOW. How can this be done most easily. It is important that the e-mail setup not be disturbed, since it was crafted to work with an IP that requires authentication. Thanks, -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

8 15

ipv6 day
by Karanbir Singh 08 Jun '11

08 Jun '11

hi, The ipv6 day[1] is now in full swing across the world. Are your CentOS machines taking part ? serving content ? Are you seeing anything interesting or strange on your CentOS machines as a fall out ? 1]: http://www.worldipv6day.org/ - KB

2 1

Re: [CentOS] mouse scroll-wheel side-click configuration?
by fred smith 08 Jun '11

08 Jun '11

On Tue, Jun 07, 2011 at 11:45:02PM +0200, Ljubomir Ljubojevic wrote: > fred smith wrote: > > Still googling, no joy so far (though I'm not giving up yet). > > > > Can anyone point me to a resource that may help me figure out how to > > make the side-clicks of the scroll wheel on a logitech mouse do something > > useful? > > > > thanks! > > > Can you elaborate in what setting? GNOME? CentOS 5.x? Quoting original > post would be nice. I have almost 3680 mails from several months, but > haven't seen this one. > > Ljubomir > _______________________________________________ Hi Ljubomir! This was the original posting. I was just saying that I'm not asking here merely because I'm too lazy to look on my own... I've got this logitech v220 notebook mouse, and the scroll wheel can be clicked left or right as well as rotated or clicked by pressing down. "normal" usage (i.e., left click, right click, middle click, and rotation of scroll wheel) works fine. Using xev I don't see anything reported for the side-click of the scroll wheel, so it may be that without some action by a driver, that the side-clicks aren't enabled. I suspect that Logitech's windoze driver tweaks the mouse in some way that "turns on" the additional actions of pressing the wheel to the left or right. The package lists LInux (2.6 kernel) as a supported OS, but of course they provide only windows/mac drivers for it, and the web site explicitly lists Linux as not supported. Talk about mixed messages. It's not a big deal, was just wondering if there was a way to recognize those clicks, in case there was something useful to be done with them. I've tried tweaking xorg.conf to increase number of buttons and changing z-axis from "4 5" to "6 7" but that stops the scroll wheel from working at all, so I put it back. Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord detests the way of the wicked but he loves those who pursue righteousness. ----------------------------- Proverbs 15:9 (niv) -----------------------------

2 2

Installing rather than changing
by John J. Boyer 08 Jun '11

08 Jun '11

After reading the replies to my message about changing from RHEL to CentOS I think it might be easier to install the latest version of CentOS from scratch. I can save my home directory and my e-mail setup. My access to the present system is by ssh. How can I download everything with ssh then start the install? Since I am blind, I may need sighted help during the actual install process. Is it possible to specify answers to the questions wich the install will ask beforehand? Pardon the dumb questions. I want to get the process completed with as little interference to my software development work as possible. Thanks, -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss