- Discuss - lists.centos.org

Cacti rpm for el5.6 with php53
by Pasi Kärkkäinen 27 Apr '11

27 Apr '11

Hello, Does someone know if there's a cacti rpm available that works (=installs and doesn't conflict) when "php53" rpm is installed, instead of the older "php" rpm ? cacti rpms from rpmforge/dag have these requirements: php php-mysql php-snmp So those cacti versions conflict with "php53". I checked cacti-0.8.7g-2.el5.rf -- Pasi

6 7

Re: [CentOS] ACPI: Unable to find RSDP problem with centos 5.5 but not 5.3
by sri 27 Apr '11

27 Apr '11

Two more observations: (adding to my previous below email) 1) Centos 5.6 also showing the same ACPI errors as in CentOS 5.5 2)BIOS-E820 map has a difference in the first line: (0000000000010000 instead of 0000000000000000) ================================ - Centos-5.3 BIOS-E820 memory map is: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. ================================ - Centos-5.5 BIOS-E820 memory map is: BIOS-e820: 0000000000010000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. ================================ Not sure this is why ACPI's root table is not able to find. Any comment/suggestion/pointers are really needed/appreciated. /Sri On Tue, Apr 26, 2011 at 7:14 PM, sri <bskmohan(a)gmail.com> wrote: > Hi Group, > > I was using centos 5.3 and trying to upgrade to 5.5. While installing 5.5 > it was showing ACPI related errors on the screen causing the installation > could not able to find PCI devices. > The same installation is working with Centos 5.3 without any problems. > Observed few ACPI related patches (amont 4500+ patches ) in the Centos5.5 > (kernel-2.6.18-194.32.1.centosplus.el5). > > Tried to remove those new ACPI patches (assuming they caused the problem) > but the rpmbuild process was throwing some patch dependency errors. > Attached are the config files and traces got while installing Centos5.3 and > Centos5.5 respectively. > > Any help/pointers is highly appreciated as this is showstopper for me. > > -- > -- > Sri > -- -- Krishna Mohan B

1 1

5.6 - SRPM's
by Tom Brown 26 Apr '11

26 Apr '11

Hi Is there any ETA for the SRPM's from the base tree of 5.6? I need to get my hands on the src for the centos-release package as i have to rebuilt it to prevent the repo definitions from being included. I see the src's for the updates RPM's but not the base. many thanks

14 33

glibc-2.5-58.el5_6.2.i686 broken?
by Richard Mollel 26 Apr '11

26 Apr '11

Hi, Please note RHEL has just released a fix for this issue: http://rhn.redhat.com/errata/RHBA-2011-0466.html Lets hope it makes it into centos soon... _Thanks Richard Mollel

2 1

iptables
by mattias 26 Apr '11

26 Apr '11

Can anyone see any errors in this scripts Iptables says Invalid target iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0 -o virbr0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i virbr0 -o eth0 -j ACCEPT

2 2

CentOS 5.6 x86_64 hosting unreachable Virtualbox 4.0.6 bridged guests
by Philippe 26 Apr '11

26 Apr '11

Hi, On a box running CentOS 5.6 x86_64 and Virtualbox 4.0.6, I have configured 2 guests (WinXP x86 + CentOS 5.6 x86_64) in bridged mode. The hosting box and the two guests are dhcp enabled. The hosting box get its address normally, but the 2 hosted systems fail to get theirs. The dhcp server log tells : DHCPDISCOVER from 08:00:xx:xx:xx:xx via em0: network xx.xx/16: no free leases. When changing from dhcp to static ip in the CentOS guest, 'service network restart' does not report any errors, but the guest keeps unreachable from the outside : pinging the guest works some times, but trying to reach the guest with ssh, http, or ftp always fail, with or whitout iptables enabled on the host and/or the guests. Please note that: - Kernel and softwares on the hosting CentOS are up-to-date, the box has an Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02) NIC, does not have an Intel VT compliant CPU (Pentium E5700), but VT/AMD-V enabled in bios. - The host is not configured in bridged mode (does not have a br interface configured), Oracle telling that bridged mode on the host is not required to run Virtualbox guests in bridged mode. - The 2 guests work perfectly in NAT mode, but this mode is not an option for me. - The same 2 guests work perfectly in bridged mode on another same hosting box running Fedora 14. Is anyone experimenting the same difficulties with Virtualbox on CentOS 5.6 ? I don't know where to search to solve this problem. Thanks for your help ! -- Philippe

5 5

random roundoff?
by Michael D. Berger 26 Apr '11

26 Apr '11

On my CentOS 5 box, in a C++ program that does much arithmetic, including numerous matrix multiplications, I have a situation in in which the result depends on the nature of nearby I/O. Thus, with all arithmetic done with type double, and where values are mostly in the range [-1.0e0,+1.0e0] or nearby, I do: cerr << "some stuff" << endl; mat3 = matmult(mat1,mat2); I get a difference of the order 1.0e-15 depending on whether the cerr line does or does not end in "endl" as shown. I am imagining that there is some "randomness" in the roundoff that depends on the I/O situation. Is this credible? Any other suggestions? Thanks for your help, Mike.

3 2

mdraid woes (missing superblock?)
by Jussi Hirvi 26 Apr '11

26 Apr '11

I have a raid1 array which is somehow faulty. There is 1,5 TB of stuff, I would not want to lose it (though I have full backup). The array cannot be mounted on startup (error message was "missing superblock"). I had to boot from DVD with linux rescue and remove the array from fstab. Here is some info - I am a little dumbfounded. [root@a134-224 log]# cat /proc/mdstat (...) md5 : active raid1 sdb1[0] sdd1[1] 1562505856 blocks [2/2] [UU] ## mdadm examine - I believe the following output indicates that there really *is* a superblock [root@a134-224 log]# mdadm --examine /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 194e7fdc:2a288e87:c03d8b24:c0120803 Creation Time : Sat Apr 23 20:41:08 2011 Raid Level : raid1 Used Dev Size : 1562505856 (1490.12 GiB 1600.01 GB) Array Size : 1562505856 (1490.12 GiB 1600.01 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Update Time : Tue Apr 26 11:48:35 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 657d7a24 - correct Events : 14 Number Major Minor RaidDevice State this 0 8 17 0 active sync /dev/sdb1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 49 1 active sync /dev/sdd1 # examine the other partition/dev/sdd1: Magic : a92b4efc Version : 0.90.00 UUID : 194e7fdc:2a288e87:c03d8b24:c0120803 Creation Time : Sat Apr 23 20:41:08 2011 Raid Level : raid1 Used Dev Size : 1562505856 (1490.12 GiB 1600.01 GB) Array Size : 1562505856 (1490.12 GiB 1600.01 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Update Time : Tue Apr 26 11:48:35 2011 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 657d7a46 - correct Events : 14 Number Major Minor RaidDevice State this 1 8 49 1 active sync /dev/sdd1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 49 1 active sync /dev/sdd1 [root@a134-224 log]# mdadm --examine --scan (...) ARRAY /dev/md5 level=raid1 num-devices=2 UUID=194e7fdc:2a288e87:c03d8b24:c0120803 [root@a134-224 log]# mdadm --stop /dev/md5 mdadm: stopped /dev/md5 [root@a134-224 log]# mdadm --assemble /dev/md5 mdadm: /dev/md5 has been started with 2 drives. # but it cannot be mounted: [root@a134-224 log]# mount /dev/md5 /kvbck/ mount: you must specify the filesystem type [root@a134-224 log]# mount -t ext3 /dev/md5 /kvbck/ mount: wrong fs type, bad option, bad superblock on /dev/md5, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so [root@a134-224 log]# tail /var/log/messages Apr 26 17:14:09 localhost kernel: md: unbind<sdb1> Apr 26 17:14:09 localhost kernel: md: export_rdev(sdb1) Apr 26 17:14:09 localhost kernel: md: unbind<sdd1> Apr 26 17:14:09 localhost kernel: md: export_rdev(sdd1) Apr 26 17:14:17 localhost kernel: md: md5 stopped. Apr 26 17:14:17 localhost kernel: md: bind<sdd1> Apr 26 17:14:17 localhost kernel: md: bind<sdb1> Apr 26 17:14:17 localhost kernel: raid1: raid set md5 active with 2 out of 2 mirrors Apr 26 17:14:56 localhost kernel: hfs: unable to find HFS+ superblock Apr 26 17:15:05 localhost kernel: VFS: Can't find ext3 filesystem on dev md5. # Why does the log complain about HFS+ superblock? The fs should be ext3. - Jussi -- Jussi Hirvi * Green Spot Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

1 0

FYI - pci_mmcfg_init kernel error after upgrading to 5.6
by Windsor Dave L. (AdP/TEF7.1) 26 Apr '11

26 Apr '11

Just thought I'd pass along an error I received this weekend after upgrading two servers to 5.6. Both are HP Proliant DL380 servers running 64-bit, but one is a G6 model and one is a G7. After the upgrade and the reboot to the 2.6.18-238.9.1.el5 kernel, both servers displayed the following error at boot: "pci_mmcfg_init marking 256MB space uncacheable." Some Googling found me the following link: https://partner-bugzilla.redhat.com/show_bug.cgi?id=581933 There are apparently performance implications due to this issue. Fortunately, the solution is simple: just boot with the kernel parameter acpi_mcfg_max_pci_bus_num=on If everyone is already familiar with this, please ignore. :-) -- Best Regards, Dave Windsor Robert Bosch LLC Team Leader, MES Database Infrastructure Group (AdP/TEF7.1) 4421 Highway 81 North Anderson, SC 29621 USA www.bosch.us Tel: 1 (864) 260-8459 Fax: 1 (864) 260-8422 Dave.Windsor(a)us.bosch.com

4 8

updating libvorbis
by Philippe Naudin 26 Apr '11

26 Apr '11

Hello, On a machine with CentOS-5.6, I need libvorbis >= 1.2, so I have recompiled and packaged libvorbis. But I get the following error : $ rpm -U /usr/src/redhat/RPMS/x86_64/libvorbis-1.2.3-phn.1.x86_64.rpm /usr/src/redhat/RPMS/x86_64/libvorbis-devel-1.2.3-phn.1.x86_64.rpm package libvorbis-1.1.2-3.el5_4.4.x86_64 (which is newer than libvorbis-1.2.3-phn.1.x86_64) is already installed package libvorbis-devel-1.1.2-3.el5_4.4.x86_64 (which is newer than libvorbis-devel-1.2.3-phn.1.x86_64) is already installed Who knows how to make rpm understand than 1.2.3 is newer than 1.1.2 ? I have tried : %define name libvorbis Name: %{name} Provides: %{name} = %{version}-%{release} Obsoletes: %{name} < %{version}-%{release} and the same thing for %{name}-devel, but without any success. "Yum update" also fails, with the following error : Examining /usr/src/redhat/RPMS/x86_64/libvorbis-1.2.3-phn.1.x86_64.rpm: libvorbis-1.2.3-phn.1.x86_64 /usr/src/redhat/RPMS/x86_64/libvorbis-1.2.3-phn.1.x86_64.rpm: does not update installed package. Examining /usr/src/redhat/RPMS/x86_64/libvorbis-devel-1.2.3-phn.1.x86_64.rpm: libvorbis-devel-1.2.3-phn.1.x86_64 /usr/src/redhat/RPMS/x86_64/libvorbis-devel-1.2.3-phn.1.x86_64.rpm: does not update installed package. No Packages marked for Update Can someone help me ? Thanks, -- Philippe

2 4

opreport version 0.9.4 on Centos Linux 5.5
by Frank Chang 26 Apr '11

26 Apr '11

Nicholas Thierry-Mieg, Thank you for your reply on Saturday Apr 23,2011. Since then I have been trying to learn how to use oprofile 0.9.4 on Centos Linux 5.5. If I follow the following steps running as root, opcontrol --shutdown opcontrol --callgraph=7 opcontrol --image=/home/frankc/DQTTest5/MatchUpTest/lirh5g_deb/Mary48.exe opcontrol --start /home/frankc/DQTTest5/MatchUpTest/lirh5g_deb/Mary48.exe opcontrol --dump opreport -c > profile_info.txt or opreport -l /home/frankc/DQTTest5/MatchUpLib/lirh5g_deb/libmdMatchup.so I obtain the following warning: warning: the last modified time of the binary file does not match that of the sample file for /home/frankc/DQTTest5/MatchUpLib/lirh5g_deb/libmdMatchup.so Either this is the wrong binary or the binary has been modified since the sample file was created. warning: the last modified time of the binary file does not match that of the sample file for /home/frankc/DQTTest5/MatchUpTest/lirh5g_deb/MatchUpAccurate.exe I am wondering how to prevent this warning message from occuring because it indicates our profiling results may be incorrect. Thank you.

1 0

Adding comments to /etc/sysconfig/iptables
by Alexander Farber 26 Apr '11

26 Apr '11

Hello, I'm a user (and big fan) of CentOS 5.6 and in my /etc/sysconfig/iptables there are few blocking rules for some annoying visitors of my website (I run a card game there since many years and some people are "special"): *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [294:35064] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -s xx.xx.0.0/16 -j DROP -A INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 80,8080,443 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 \ --tcp-flags FIN,SYN,RST,ACK SYN -m limit --limit 1/min --limit-burst 2 -j ACCEPT COMMIT My problem is that I often don't remember why and when a blocking rule had been added. Is there a way to add comments to the iptables file? A hash mark # does not seem to work. If comments not possible, please share few tricks - how do YOU usually use iptables on CentOS, i.e. there is "sudo service iptables save", but I've yet to discover its usefulness Regards Alex

5 5

Blocking an IP address both as source and destination
by Alexander Farber 25 Apr '11

25 Apr '11

Hello, how do you block incoming AND outgoing traffic to a site? I have 2 drop lines for a site in my /etc/sysconfig/iptables: *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [294:35064] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -s xx.xx.xx.0/24 -j DROP -A INPUT -d xx.xx.xx.0/24 -j DROP -A INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 80,8080 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 --tcp-flags FIN,SYN,RST,ACK SYN -m limit --limit 1/min --limit-burst 2 -j ACCEPT COMMIT but for some reason still can "ping xx.xx.xx.1" and "ssh xx.xx.xx.1" prints "ssh: connect to host xx.xx.xx.1 port 22: Connection refused" immediately, which probably means my packets aren't dropped at all. Using CentOS 5.6/64 bit Thank you Alex

4 5

centosplus kernel not up to date ?
by Nicolas Ross 25 Apr '11

25 Apr '11

Is it possible that the kernel in the centosplus repo is not up to date ? The centosplus kernel I have is kernel-PAE-2.6.18-238.5.1.el5 and the regular one is 2.6.18-238.9.1.el5... I need the plus because of the firewire drivers. Regards,

6 13

Htaccess Help
by Matt 25 Apr '11

25 Apr '11

Been looking for a while on this before resorting to asking. I have an .htaccess file like so. order allow,deny allow from x.x.x.0/24 I have this in my root html directory and it works fine. Only allows access by the x.x.x.0/24 subnet. Thing is I have one file ~"siteinfo.html" that I want to allow anyone to access. How would I do that?

2 1

Attaching LinkSys WRT54GL to CentOS machine
by Timothy Murphy 25 Apr '11

25 Apr '11

I have a LinkSys WRT54GL router, which I would like to attach to my CentOS-5.6 server, to set up a LAN 192.168.2.* . The server is attached to the internet through a Billion modem/router which has a single ethernet outlet. The instructions for the LinkSys router assume that it is being attached directly to an ADSL modem. But for various reasons I want everything to go through my server. I wonder if anyone has set up a system like this? If so, I'd be grateful for advice on how to do it. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

9 21

Should svnserve run as root?
by Les Mikesell 25 Apr '11

25 Apr '11

Now that the subversion package in CentOS is a usable version I've replaced a Collabnet package with it. But, it seems odd that the svnserve process runs as root instead of having a unique user to own the files and run the process like most other daemons. Did I miss something in the setup? -- Les Mikesell lesmikesell(a)gmail.com

1 0

Samba can't access dir - SELinux problem?
by Alexander Farber 25 Apr '11

25 Apr '11

Hello, I was using CentOS 5.5 as a "playground" VM at my WinXP notebook and now I'm migrating to a new CentOS 5.6 install and everything has worked well - except samba. I have this very permissive config to export my ~/src dir: # cat /etc/samba/smb.conf [global] guest ok = yes guest account = afarber security = share hosts allow = 172.16.6. 127.0.0.1 [src] path = /home/afarber/src public = yes writable = yes printable = no But in the new install it has stopped working and prints: # tail /var/log/samba/smbd.log [2011/04/25 01:36:37, 0] smbd/service.c:make_connection_snum(1013) '/home/afarber/src' does not exist or permission denied when connecting to [src] Error was Permission denied I've checked permissions and installed rpms - they're all the same (and smbd runs as "root", doesn't it?) Is this maybe a SELinux setting problem? # tail /var/log/audit/audit.log (only at the new VM) type=AVC msg=audit(1303720863.712:53): avc: denied { search } for pid=6737 comm="smbd" name="/" dev=sda3 ino=2 scontext=user_u:system_r:smbd_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1303720863.712:53): arch=c000003e syscall=4 success=no exit=-13 a0=2b79380c9620 a1=7fff35dfe9f0 a2=7fff35dfe9f0 a3=ea items=0 ppid=6543 pid=6737 auid=500 uid=500 gid=0 euid=500 suid=0 fsuid=500 egid=500 sgid=0 fsgid=500 tty=(none) ses=2 comm="smbd" exe="/usr/sbin/smbd" subj=user_u:system_r:smbd_t:s0 key=(null) # ls -aldZ /home/afarber/src (same result at both old and new VMs) drwxrwxr-x afarber afarber user_u:object_r:user_home_t /home/afarber/src # ls -aldZ /home/afarber/ drwx------ afarber afarber user_u:object_r:user_home_dir_t /home/afarber/ Does anybody please know a magic command here? Thank you Alex

3 4

rpm libuser-devel is not signed
by Olaf Mueller 25 Apr '11

25 Apr '11

Hello, 'yum update' runs into the following error message. Package libuser-devel-0.54.7-2.1.el5_5.2.i386.rpm is not signed regards Olaf

13 26

Migrating standalone systems to KVM
by Jussi Hirvi 24 Apr '11

24 Apr '11

A while ago I got great instructions from Pasi for migrating standalone systems to *xen*. However, now I have decided to use KVM instead, which raises a new question: How to migrate a standalone system to *KVM*? I know a two-step way to do it: standalone system -> xen pv guest xen pv guest -> KVM pv guest I read that xen -> KVM migration is trivially easy. But is there an easier (one-step) way to do this? - Jussi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

10 13

SNMP issues since 5.6 upgrade
by Paul Stewart 24 Apr '11

24 Apr '11

Hi there... I scanned the archives and did some Google'ing ... can find some references to these errors but didn't find a solution. This started when upgrading some servers from 5.5 to 5.6 release. It's net-snmp creating a lot of errors in the /var/log/messages suddenly. I do believe this is only happening on 64 bit installations but not 100% sure yet... [root@mail1 paul]# uname -a Linux mail1.xxxxxx.xxx 2.6.18-238.9.1.el5PAE #1 SMP Tue Apr 12 18:52:55 EDT 2011 i686 i686 i386 GNU/Linux [root@mail1 paul]# cat /etc/issue CentOS release 5.6 (Final) Kernel \r on an \m Apr 24 10:26:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:26:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:26:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:26:54 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:26:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:27:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:27:24 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:27:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:27:37 mail1 snmpd[3493]: Connection from UDP: [98.124.20.115]:52611 Apr 24 10:27:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:27:54 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:27:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:28:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:28:24 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:28:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:28:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:28:54 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:28:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:29:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:29:24 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:29:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:29:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:29:54 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Apr 24 10:29:54 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:30:24 mail1 snmpd[3493]: c64 32 bit check failed Apr 24 10:30:24 mail1 snmpd[3493]: netsnmp_assert 1 == new_val->high failed int64.c:419 netsnmp_c64_check32_and_update() Is there a fix for this? Thanks ;) Paul Stewart

1 0

Re; Valgrind/Callgrind 3.6.1 does not appear to work on Centos Linux 5.5
by Frank Chang 24 Apr '11

24 Apr '11

Tru Huynh, Thank you for your reply. When I enter uname -a I obtain the following output: Linux localhost.localdomain 2.6.18-194.26.1.el5PAE #1 SMP Tue Nov 9 13:34:42 EST 2010 i686 i686 i386 GNU/Linux. This information indicates we are using x86_32 architecture rather than a x86_64 architecture. Also, when I enter rpm -q glibc glibc-devel, I obtain the following output: glibc-2.5.49.el5_57 glibc-devel-2.5.49.el5-5.7. I think we are using a different architecture compared to your x86_64 architecture. Also , we using a different version of glibc and glibc-devel than the versions listed in your reply. Please tell us whether our Callgrind errors are caused by a libc mismatch and if there is a workaround to this lib mismatch. Thank you.

1 0

Re: [CentOS] yum install oprofile-gui
by Kai Schaetzl 23 Apr '11

23 Apr '11

Frank Chang wrote on Sat, 23 Apr 2011 11:56:31 -0400: > Kai Schaelzl, I think I underdetstand your email. Yes, I am replying > to a digest version. Could you suggest another client which we could > use the emails are arranged by threads. No, if you are replying to the digest version there is no way to get correct threading. That's why I asked if you are using the digest or a broken client ;-) The only way to get to correct threading is to move from digest to normal mailing list subscription. Cheers, Kai

1 0

Re: [CentOS] yum install oprofile-gui
by Frank Chang 23 Apr '11

23 Apr '11

Nicolas Thierry-Mieg, We followed your instructions to yum install oprofile-gui. We were able to install oprofile-guii.i386 0:0.9.4-15.el5.centos and oprofile.i386 0.0.9.4.15.el.5.centos. I was wondering what our next step should be. I tried ./configure --with-kernel-support with oprofile-0.9.6 and obtain a warning, a working QT not found, no GUI was built. Should we try to build oprofile-0.9.4? If so, how steps do have to do install oprofile-0.9.4? Thank you.

2 1

KVM, virsh attach-disk error
by Jussi Hirvi 23 Apr '11

23 Apr '11

I try to add a fresh, unformatted disk partition to a KVM guest. I follow the directions given here: http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5/html-single/Vi… First I check that the module acpiphp is present on the guest. It is. On the host I write: virsh attach-disk test1 /dev/sdb1 sda --driver tap --mode shareable - test1 is my guest domain - /dev/sdb1 is the name of the unformatted partition on the host - sda is what it is supposed to be called on the guest (the name is unused on the guest) - the example in RHEL Virtualization guide says "--mode readonly". This does not sound right for a hard disk; hence I try "--mode shareable"; the error (see below) however is the same, whichever I use Now, the command above produces this error. I find no google results with this error text. Can someone tell, what causes the error? > error: Failed to attach disk error: operation failed: adding scsi > disk controller failed: type scsi not a hotpluggable PCI device. > failed to add if=scsi - Jussi -- Jussi Hirvi * Green Spot Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

2 4

can not install CentOS as VM in KVM
by Michael Zoet 23 Apr '11

23 Apr '11

Hi to all, I am trying to install CentOS 5.5 as VM on a KVM server running Ubuntu 10.04. The Problem: the installer does not find the iso image. (Direct copy from website downlod.) I can start CentOS from the iso and can even do some disk checks. But when I go further the installer says "no CDROm found". Pretty weird. I tried all CentOS 5.5. image available (Live CD, net install, bin 1 of 8, 32 bit and 64 bit). Other installation (Debin, Ubuntu, SLES, Windows XP, Windows 7, Windows Server 2008) worked fine. Perhaps somebody can help me in setting things up for that. Michael

4 4

Valgrind/Callgrind 3.6.1 does not appear to work on Centos Linux 5.5
by Frank Chang 22 Apr '11

22 Apr '11

Hi, For the last day or two I having been trying to get Valgrind/Callgrind 3.6.1 to work on Centos Linux 5.5 using a simple Fibonacci C++ program(shown below). After compiling the program using g++ -g -o MatchUpAccurate MatchUpAccurate.cpp, we run: /home/frankc/DQTTest/valgrind-3.6.1/coregrind/valgrind --tool=callgrind --dump-instr=yes --simulate-cache=yes --collect-jumps=yes ./MatchUpAccurate.exe. Then we get an error message from callgrind(shown below). A programmer sent me an email showing me that my test program is profiled correctly on Ubuntu. I received an email from a programmer yesterday who thinks the reason that callgrind is not able to profile my C++ program on Centos Linux Version 5.5 is because of an libc conflict. "what is the version of libc on the host? Is it a vm or physical? I guess it is gonna be a ABI/version conflict of libc. If you cannot figure it out, just report it. Chances are, a dev will be able to tell you in 5 seconds." In order to determine what version of libc is on the Centos Linux 5.5 host, I tried: rpm -qa | grep glibc. The answer was: glibc-devel-2.5-49.el5_5.7 glibc-2.5-49.el5_5.7 glibc-headers-2.5-49.el5_5.7 glibc-common-2.5-49.el5. We were wondering if anyone has been able to run Valgrind/Callgrind 3.6.1 on Centos Linux 5.5? Thank you. // Callgrind error message ==18130== Callgrind, a call-graph generating cache profiler ==18130== Copyright (C) 2002-2010, and GNU GPL'd, by Josef Weidendorfer et al. ==18130== Using Valgrind-3.6.1 and LibVEX; rerun with -h for copyright info ==18130== Command: ./MatchUpAccurate.exe ==18130== --18130-- warning: Pentium 4 with 12 KB micro-op instruction trace cache --18130-- Simulating a 16 KB I-cache with 32 B lines ==18130== For interactive control, run 'callgrind_control -h'. std::ios_base::Init::Init() BB# 215387 Callgrind: jumps.c:164 (new_jcc): Assertion '(0 <= jmp) && (jmp <= from->bb->cjmp_count)' failed. ==18130== at 0x3801E4C8: report_and_quit (m_libcassert.c:193) ==18130== by 0x3801E69C: vgPlain_assert_fail (m_libcassert.c:267) ==18130== by 0x3800FCD9: vgCallgrind_get_jcc (jumps.c:164) ==18130== by 0x38003534: vgCallgrind_push_call_stack (callstack.c:217) ==18130== by 0x38001FDB: vgCallgrind_setup_bbcc (bbcc.c:844) ==18130== by 0x6292A7E3: ??? sched status: running_tid=1 Thread 1: status = VgTs_Runnable ==18130== at 0x3E30CB0: std::ios_base::Init::Init() (in /usr/lib/libstdc++.so.6.0.8) ==18130== by 0x3EA0125: ??? (in /usr/lib/libstdc++.so.6.0.8) ==18130== by 0x3E22BD0: ??? (in /usr/lib/libstdc++.so.6.0.8) ==18130== by 0xAE2162: call_init (in /lib/ld-2.5.so) ==18130== by 0xAE2272: _dl_init (in /lib/ld-2.5.so) ==18130== by 0xAD484E: ??? (in /lib/ld-2.5.so) // Test program MatchUpTest.cpp int fibonacci(int n){ if (n == 0) return 0; else if (n == 1) return 1; else return fibonacci(n - 1) + fibonacci(n-2); } int main(int Argc_,char *Argv_[]) { fibonacci(10); return 1; }

2 1

Re: [CentOS] QT and oprofile on Centos Linux 5.5
by Frank Chang 22 Apr '11

22 Apr '11

Philip Schaffner, Thank you for your reply. I guess we will have to wait until Centos 6 arrives to get a working QT. Did you see Nicolas Thierry-Mieg's response regarding yum install oprofile-gui. We were able to install oprofile-guii.i386 0:0.9.4-15.el5.centos and oprofile.i386 0.0.9.4.15.el.5.centos. Thank you.

1 0

GFS2 performance
by Arnts, Leo 22 Apr '11

22 Apr '11

Hi, I'm trying to get more performance out of my DRBD cluster with gfs2. It seems that our gfs2 implementation is quit slow. When running the ping_pong test we get no more than a 1000 locks/sec on the disk. ./ping_pong /mnt/backup/test.dat 4 879 locks/sec The cluster config has been updated with: <dlm plock_ownership="1" plock_rate_limit="0"/> <gfs_controld plock_rate_limit="0"/> gfs2_tool getargs /mnt/backup statfs_percent 0 data 2 suiddir 0 quota 0 posix_acl 0 upgrade 0 debug 0 localflocks 0 localcaching 0 ignore_local_fs 0 spectator 0 hostdata jid=1:id=2752514:first=0 locktable lockproto gfs2_tool df -H /mnt/backup: SB lock proto = "lock_dlm" SB lock table = "cybercenter:backup" SB ondisk format = 1801 SB multihost format = 1900 Block size = 4096 Journals = 2 Resource Groups = 7451 Mounted lock proto = "lock_dlm" Mounted lock table = "cybercenter:backup" Mounted host data = "jid=1:id=2752514:first=0" Journal number = 1 Lock module flags = 0 Local flocks = FALSE Local caching = FALSE Type Total Used Free use% ------------------------------------------------------------------------ data 3T 1T 1T 47% inodes 1T 96M 1T 0% Hdparm information of the disk: hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 20988 MB in 2.00 seconds = 10512.28 MB/sec Timing buffered disk reads: 74 MB in 3.05 seconds = 24.30 MB/sec Has someone an idea about increasing the performance of my gfs2 filesystem? Kind Regards, Leo Arnts

1 0

How to merge many LDAP Servers to the One Server
by sync 22 Apr '11

22 Apr '11

Hi , all : I have many LDAP Servers which are 389 LDAP Server on different network . So I want to merge them to the one server. Could someone can give some suggestions? Thanks in advance...

2 2

Re: [CentOS] How to install binutils-devel on Centos Linux5.5
by Frank Chang 22 Apr '11

22 Apr '11

Simon Matter and Ned Slider, Thank you for your answers. This afternoon , I installed binutils-devel on Centos Linux 5.5. Then , I installed all the QT packages except for the two QT client packages. When I ran ./configure --with-kernel-support on the OProfile Linux profiler distribution 0.9.6, I get the warning: a working QT was not found: no GUI was built. How do I resolve this issue on Centos Linux 5.5? Thank you.

3 2

iscsi multipath fails
by Adam Wead 22 Apr '11

22 Apr '11

Hi all, I have a Dell server running cent 5.6, new install, connecting to an IBM DS3500. I have configured iscsi connections using iscsid and can log into the targets on the IBM. I can also mount the LUNs when accessing them from their active controller path. When I throw multipath into the mix, it fails completely. Multipath is working, when I run multipath -ll it shows me the correct active path and it is mapped to a device under /dev/mapper. However, if I try to access the device from that path, no luck. A mount request just hangs and eventually there's a kernel error message. I'm using the native rdac drivers that came with the OS. Anyone using something similar? My guess is that it's either bad drivers, or a bad multipath config. I started with the default, but after tweaking different parameters, it's still not working. Any advice is greatly appreciated. thanks, Adam Wead

3 2

KVM virt-install on disk image - "no space"
by Jussi Hirvi 21 Apr '11

21 Apr '11

I guess I need the list again. I try to install my first KVM guest. Here is what I do, and finally, what I stumble on. First I created a qcow2 img: # qemu-img create -f qcow2 /var/lib/libvirt/images/test1.img 15G And I created a network bridge (not essential here) To get a text-based install, I followed this how-to: http://sysadminman.net/blog/2011/kvm-virtualization-text-centos-guest-insta… My install command was: virt-install \ --name test1 \ --os-variant=rhel5.4 \ --ram 512 \ --vcpus=1 \ --accelerate \ --nographics \ -v \ --location=/mnt/centos56/ \ --network bridge:br0 \ --disk path=/var/lib/libvirt/images/test1.img,size=15 \ --extra-args="console=ttyS0"; I tried this also without the "size" argument for "disk" Now, the install begins ok. I do a http install from a nearby mirror. BUT when it is time to do partitions, I get > Which drive(s) do you want to use for this installation? | > | [*] vda 0 MB (Unknown) ^ | > | And if I now try to create partitions, I get "no space" error. What is going on?? Cheers to CentOS! - Jussi -- Jussi Hirvi * Green Spot Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

3 4

User accounts management for small office
by Jeff Boyce 21 Apr '11

21 Apr '11

Greetings - This may be a little off-topic here so if someone wants to point me to a more appropriate mailing list I would appreciate it. I administer the network for my small company and am preparing to install a new server in the next month or so. It will be running CentOS 6 and function primarily as a Samba file server to 10 Windows workstations (XP, Vista, 7). It will also host our OpenVPN server and possibly our FTP server; however I am hoping to move our FTP server to a gateway box when the new server is installed. The issue that I would like to be able to resolve when the new server is installed, is that currently if a user wants to change the password on their Windows workstation, I have to manually update that new password on the Linux user account, and also manually change the Samba user account. Manually updating the password in three different locations is a minor headache that I would like to correct. I have been researching and reading lots of information about account management to try and understand what is available, and what would be the best fit for my network size. Much of what I have read is related to larger networks or larger user bases, which seem to have a lot of extraneous stuff that would be unnecessary in my small user environment. I looked into OpenLDAP, and have recently been reading about Samba/Winbind. But after encountering the following statement in the Samba documentation, I am still lost about what I could, or should, be using. "A standalone Samba server is an implementation that is not a member of a Windows NT4 domain, a Windows 200X Active Directory domain, or a Samba domain. By definition, this means that users and groups will be created and controlled locally, and the identity of a network user must match a local UNIX/Linux user login. The IDMAP facility is therefore of little to no interest, winbind will not be necessary, and the IDMAP facility will not be relevant or of interest." My only goal is to be able to allow my users to change their Windows password at their workstation and have it perpetuate through the system so that it also changes their Linux User and Samba User account passwords. I don't expect to ever have more than a dozen users, so I want something that fits our size network and is simple to administer. I am not looking for a how-to to set something up, but some opinions about what I should consider using, and why it would be a good fit to achieve my goal. I can do the additional research to understand configuration once I know what I should be researching. Thanks. Please cc me directly, as I only get the list in daily digest mode. Jeff Boyce Meridian Environmental

7 12

CentOS 5.6 and KVM failure
by compdoc 21 Apr '11

21 Apr '11

After updating to 5.6 on a server this morning, I can no longer boot two virtual machines. One is trixbox which I believe is a 32bit centos based distro, and the other vm is a 64bit Windows 2008 installation. The error I get in the virt-manager console is FATAL: No bootable device. Both VMs are qcow2 format, and I've checked file permissions. I'm going to boot a live cd in the trixbox vm to see if I can access anything on it's qcow2 disk. Any hints appreciated...

5 8

CentOS-announce Digest, Vol 74, Issue 7
by centos-announce-request＠centos.org 21 Apr '11

21 Apr '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2011:0216 CentOS 5 x86_64 vnc Update (Karanbir Singh) 2. CEBA-2011:0033 CentOS 5 x86_64 conga Update (Karanbir Singh) 3. CEBA-2011:0388 CentOS 5 i386 openswan Update (Karanbir Singh) 4. CESA-2011:0394 Important CentOS 5 i386 conga Update (Karanbir Singh) 5. CEBA-2011:0172 CentOS 5 i386 gdbm Update (Karanbir Singh) 6. CESA-2011:0394 Important CentOS 5 x86_64 conga Update (Karanbir Singh) 7. CEBA-2011:0456 CentOS 5 i386 xorg-x11-server Update (Karanbir Singh) 8. CEBA-2011:0457 CentOS 5 x86_64 xorg-x11-xfs Update (Karanbir Singh) 9. CESA-2011:0170 Moderate CentOS 5 x86_64 libuser Update (Karanbir Singh) 10. CEBA-2011:0457 CentOS 5 i386 xorg-x11-xfs Update (Karanbir Singh) 11. CEBA-2011:0388 CentOS 5 x86_64 openswan Update (Karanbir Singh) 12. CESA-2011:0170 Moderate CentOS 5 i386 libuser Update (Karanbir Singh) 13. CEBA-2011:0456 CentOS 5 x86_64 xorg-x11-server Update (Karanbir Singh) 14. CEBA-2011:0033 CentOS 5 i386 conga Update (Karanbir Singh) 15. CEBA-2011:0172 CentOS 5 x86_64 gdbm Update (Karanbir Singh) 16. CEBA-2011:0216 CentOS 5 i386 vnc Update (Karanbir Singh) 17. CEBA-2011:0142 CentOS 5 i386 libvirt Update (Karanbir Singh) 18. CEBA-2011:0142 CentOS 5 x86_64 libvirt Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Apr 2011 16:28:05 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0216 CentOS 5 x86_64 vnc Update To: centos-announce(a)centos.org Message-ID: <20110420162805.GA23001(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0216 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0216.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 95a33840c4dfdafde335b03093c5c678 vnc-4.1.2-14.el5_6.6.x86_64.rpm 228eaec0c7f9df994b6100118c80240a vnc-server-4.1.2-14.el5_6.6.x86_64.rpm Source: 908a89b31ceefa6de0a905698e7bdac5 vnc-4.1.2-14.el5_6.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 20 Apr 2011 16:13:09 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0033 CentOS 5 x86_64 conga Update To: centos-announce(a)centos.org Message-ID: <20110420161309.GA22750(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0033 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0033.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 57ba15e655580a4ec5f4834252696c98 luci-0.12.2-24.el5.centos.0.x86_64.rpm a0b895d8c6b372f5c7ca0d5794cb155c ricci-0.12.2-24.el5.centos.0.x86_64.rpm Source: cfaf1fe498770339aba9858172b4d5ff conga-0.12.2-24.el5.centos.0.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 20 Apr 2011 16:44:38 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0388 CentOS 5 i386 openswan Update To: centos-announce(a)centos.org Message-ID: <20110420164438.GA23671(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0388 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0388.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 7ca1346db509381378418dacdae66695 openswan-2.6.21-5.el5_6.4.i386.rpm 48978756e1c38e6500b83ab1cf7a9ed2 openswan-doc-2.6.21-5.el5_6.4.i386.rpm Source: cfe41e13302c7e9fc6d560c0b7f4936e openswan-2.6.21-5.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 20 Apr 2011 16:13:40 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0394 Important CentOS 5 i386 conga Update To: centos-announce(a)centos.org Message-ID: <20110420161340.GA22769(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0394 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0394.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 1048f9bb172cfbde8557d39828ae580f luci-0.12.2-24.el5.centos.1.i386.rpm 7ffcb8436b387eaf30ed1683f3ef120b ricci-0.12.2-24.el5.centos.1.i386.rpm Source: ed08bb9e3a7beb670700bc1830e32009 conga-0.12.2-24.el5.centos.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 20 Apr 2011 16:37:57 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0172 CentOS 5 i386 gdbm Update To: centos-announce(a)centos.org Message-ID: <20110420163757.GA23531(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0172 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0172.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: a8fdf362618bf70866b33adb98edf180 gdbm-1.8.0-26.2.1.el5_6.1.i386.rpm cb1dab90f7fa35628742717a279462f3 gdbm-devel-1.8.0-26.2.1.el5_6.1.i386.rpm Source: bdd2e5b5d61521b0e0f0069cbe2e2ada gdbm-1.8.0-26.2.1.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 20 Apr 2011 16:13:41 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0394 Important CentOS 5 x86_64 conga Update To: centos-announce(a)centos.org Message-ID: <20110420161341.GA22782(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0394 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0394.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 6876b352f595b24bb20dfd4c86325dea luci-0.12.2-24.el5.centos.1.x86_64.rpm 9b1ff70b3cb5e14b92db6205e37ec95f ricci-0.12.2-24.el5.centos.1.x86_64.rpm Source: ed08bb9e3a7beb670700bc1830e32009 conga-0.12.2-24.el5.centos.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Wed, 20 Apr 2011 16:34:55 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0456 CentOS 5 i386 xorg-x11-server Update To: centos-announce(a)centos.org Message-ID: <20110420163455.GA23357(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0456 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0456.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 5f929a401b6af7ed81f5a205d59dc0d3 xorg-x11-server-sdk-1.1.1-48.76.el5_6.4.i386.rpm f81b25d045449be8f17cca16578c53c0 xorg-x11-server-Xdmx-1.1.1-48.76.el5_6.4.i386.rpm 82ace941b9250f66576f8e7c59cca97c xorg-x11-server-Xephyr-1.1.1-48.76.el5_6.4.i386.rpm f4a73640c4d599b2f742f532b8184e7c xorg-x11-server-Xnest-1.1.1-48.76.el5_6.4.i386.rpm 48176694aecb2be6c02ae6544f675ecf xorg-x11-server-Xorg-1.1.1-48.76.el5_6.4.i386.rpm 6d72e45d2faf1879a2679f261a86d6e3 xorg-x11-server-Xvfb-1.1.1-48.76.el5_6.4.i386.rpm f6c2872350ded552f444bd4bb8f12272 xorg-x11-server-Xvnc-source-1.1.1-48.76.el5_6.4.i386.rpm Source: 9b3b73de2a36da52e6cb3c2a276a6d4f xorg-x11-server-1.1.1-48.76.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 20 Apr 2011 16:15:26 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0457 CentOS 5 x86_64 xorg-x11-xfs Update To: centos-announce(a)centos.org Message-ID: <20110420161526.GA22891(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0457 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0457.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 0184a9e755eb3b7711b837c9d6971b88 xorg-x11-xfs-1.0.2-5.el5_6.1.x86_64.rpm ef02db4a85d8258344c852396355a9e8 xorg-x11-xfs-utils-1.0.2-5.el5_6.1.x86_64.rpm Source: c48a88afa248b4ce26b0679086798160 xorg-x11-xfs-1.0.2-5.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Wed, 20 Apr 2011 16:30:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0170 Moderate CentOS 5 x86_64 libuser Update To: centos-announce(a)centos.org Message-ID: <20110420163025.GA23175(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0170 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0170.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 88a7e1acd85ddce6762e0e522555ff49 libuser-0.54.7-2.1.el5_5.2.i386.rpm f0c44bde109468a0b15e823f374a3667 libuser-0.54.7-2.1.el5_5.2.x86_64.rpm 69c601686f7a13af9cb1e04db50583de libuser-devel-0.54.7-2.1.el5_5.2.i386.rpm 57673961cd66a59d2eedfea71f616209 libuser-devel-0.54.7-2.1.el5_5.2.x86_64.rpm Source: 103d743cb8745b1eb638ae6180ea823b libuser-0.54.7-2.1.el5_5.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Wed, 20 Apr 2011 16:15:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0457 CentOS 5 i386 xorg-x11-xfs Update To: centos-announce(a)centos.org Message-ID: <20110420161525.GA22878(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0457 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0457.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 7cf77dcf53cfd03319dabc67f557b47b xorg-x11-xfs-1.0.2-5.el5_6.1.i386.rpm b362a6cd37912e713b3c527eae58d5c0 xorg-x11-xfs-utils-1.0.2-5.el5_6.1.i386.rpm Source: c48a88afa248b4ce26b0679086798160 xorg-x11-xfs-1.0.2-5.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Wed, 20 Apr 2011 16:44:38 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0388 CentOS 5 x86_64 openswan Update To: centos-announce(a)centos.org Message-ID: <20110420164438.GA23684(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0388 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0388.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: a8d2a3f43d3f0e5c825eca9db830e07f openswan-2.6.21-5.el5_6.4.x86_64.rpm ab41a304391d79c2712d8e8ed9a6c4cb openswan-doc-2.6.21-5.el5_6.4.x86_64.rpm Source: cfe41e13302c7e9fc6d560c0b7f4936e openswan-2.6.21-5.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 12 Date: Wed, 20 Apr 2011 16:30:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2011:0170 Moderate CentOS 5 i386 libuser Update To: centos-announce(a)centos.org Message-ID: <20110420163025.GA23162(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2011:0170 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2011-0170.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 88a7e1acd85ddce6762e0e522555ff49 libuser-0.54.7-2.1.el5_5.2.i386.rpm 69c601686f7a13af9cb1e04db50583de libuser-devel-0.54.7-2.1.el5_5.2.i386.rpm Source: 103d743cb8745b1eb638ae6180ea823b libuser-0.54.7-2.1.el5_5.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 13 Date: Wed, 20 Apr 2011 16:34:55 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0456 CentOS 5 x86_64 xorg-x11-server Update To: centos-announce(a)centos.org Message-ID: <20110420163455.GA23370(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0456 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0456.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: b1b260549c8275cbc546a55f27408603 xorg-x11-server-sdk-1.1.1-48.76.el5_6.4.x86_64.rpm 5bcb78d24eaa21e53974ca7a4432fd7e xorg-x11-server-Xdmx-1.1.1-48.76.el5_6.4.x86_64.rpm 1d416ff541cb6f6d06f47a9d8b033910 xorg-x11-server-Xephyr-1.1.1-48.76.el5_6.4.x86_64.rpm bd825b1a7e6b5e70ae94fc219341e1fc xorg-x11-server-Xnest-1.1.1-48.76.el5_6.4.x86_64.rpm e3a500133af6844e5ce5c2819f1147e6 xorg-x11-server-Xorg-1.1.1-48.76.el5_6.4.x86_64.rpm fafe84c63b47796b435be7bdb7fd973b xorg-x11-server-Xvfb-1.1.1-48.76.el5_6.4.x86_64.rpm c55a7d76253790f357e54cc947c58f3e xorg-x11-server-Xvnc-source-1.1.1-48.76.el5_6.4.x86_64.rpm Source: 9b3b73de2a36da52e6cb3c2a276a6d4f xorg-x11-server-1.1.1-48.76.el5_6.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 14 Date: Wed, 20 Apr 2011 16:13:09 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0033 CentOS 5 i386 conga Update To: centos-announce(a)centos.org Message-ID: <20110420161309.GA22737(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0033 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0033.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: ba0f8423b6557f8eea242acfad07c36b luci-0.12.2-24.el5.centos.0.i386.rpm ed3bdc309be88c6a991900e983adba3f ricci-0.12.2-24.el5.centos.0.i386.rpm Source: cfaf1fe498770339aba9858172b4d5ff conga-0.12.2-24.el5.centos.0.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 15 Date: Wed, 20 Apr 2011 16:37:57 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0172 CentOS 5 x86_64 gdbm Update To: centos-announce(a)centos.org Message-ID: <20110420163757.GA23544(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0172 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0172.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: c41f3d8277d5cd6dc378e276e0c57a88 gdbm-1.8.0-26.2.1.el5_6.1.i386.rpm 91091f7d5aa4a7e3fd988a7a2d29d5a4 gdbm-1.8.0-26.2.1.el5_6.1.x86_64.rpm 070557d3f219ade55c480fdb40f3d248 gdbm-devel-1.8.0-26.2.1.el5_6.1.i386.rpm 0fc29d8ab6960926f2b4479b5f232cfc gdbm-devel-1.8.0-26.2.1.el5_6.1.x86_64.rpm Source: bdd2e5b5d61521b0e0f0069cbe2e2ada gdbm-1.8.0-26.2.1.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 16 Date: Wed, 20 Apr 2011 16:28:04 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0216 CentOS 5 i386 vnc Update To: centos-announce(a)centos.org Message-ID: <20110420162804.GA22988(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0216 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0216.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: f95e008550abd457c7e3ef2692c83f4e vnc-4.1.2-14.el5_6.6.i386.rpm 7a8edb4e600f3235e19156af8a6b80b7 vnc-server-4.1.2-14.el5_6.6.i386.rpm Source: 908a89b31ceefa6de0a905698e7bdac5 vnc-4.1.2-14.el5_6.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 17 Date: Wed, 20 Apr 2011 16:49:47 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0142 CentOS 5 i386 libvirt Update To: centos-announce(a)centos.org Message-ID: <20110420164947.GA23891(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0142 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0142.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 9e50042207d4355c083c328e1fbb2321 libvirt-0.8.2-15.el5_6.1.i386.rpm bc185d6a0379287abc79e118bd793fc9 libvirt-devel-0.8.2-15.el5_6.1.i386.rpm bc21f7fa829b11301cc65f5e8e0db3f6 libvirt-python-0.8.2-15.el5_6.1.i386.rpm Source: 32563cb820db4342dac141137661d652 libvirt-0.8.2-15.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 18 Date: Wed, 20 Apr 2011 16:49:47 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0142 CentOS 5 x86_64 libvirt Update To: centos-announce(a)centos.org Message-ID: <20110420164947.GA23907(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2011:0142 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0142.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 90669f45e7e939841444095a6a9ce1f5 libvirt-0.8.2-15.el5_6.1.i386.rpm ac805036f476604ee8901986104c33fa libvirt-0.8.2-15.el5_6.1.x86_64.rpm 04a112b23c41184c3d18d2bc4fbf2230 libvirt-devel-0.8.2-15.el5_6.1.i386.rpm 222926bb07fe75b6205b84cd5a79c0ba libvirt-devel-0.8.2-15.el5_6.1.x86_64.rpm 2ee2823a24d27aa521e332d0e9700a11 libvirt-python-0.8.2-15.el5_6.1.x86_64.rpm Source: 32563cb820db4342dac141137661d652 libvirt-0.8.2-15.el5_6.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 74, Issue 7 **********************************************

1 0

4kB sector size HDDs
by Dawid Horacio Golebiewski 21 Apr '11

21 Apr '11

Hello again. Do any of you have one of the 'new' HDDs with 4kB Sectors currently in use? I would upgrade to the 4kB disks but I don't know if this might be problematic as I intend to use ZFS w/ RAIDz or at least a classic RAID6. How might this affect performance under 5.5 and how do I go about setting up the alignment of the partitions I use? Kind regards Dawid Horace

3 2

How to install binutils-devel on Centos Linux 5.5
by Frank Chang 21 Apr '11

21 Apr '11

Good morning, I am trying to install binutils-devel on Centos Linux 5.5 so that we can obtain lib liberty required by the oprofile-0.9.6 Linux profiler. Using root , I enter: yum local install binutils-devel-2.20.51.0.7-6.fc14.i686.rpm. Then I get the message: Public key for binutils-devel-2.20.51.0.7-6.fc14.i686.rpm is not installed. Please tell me where I get the Public key for binutils-devel-2.20.51.0.7-6.fc14.i686.rpm . Thank you.

3 2

Convert Filesystem to Ext4
by Matt 21 Apr '11

21 Apr '11

On a running 64 bit CentOS 5.6 box is it possible to convert from Ext3 to Ext4 to improve performance? Right now I can deal with a few hours of downtime on it. This is an email server with lots of I/O due to seek time. Software RAID1 as well. Will Ext4 offer much of an improvement?

7 8

yum update after fresh 5.6 install fails
by Andre Charbonneau 20 Apr '11

20 Apr '11

Hi, I just finished installing a CentOS 5.6 x86_64 system and the first thing I wanted to do after the install is to apply the software patches. But I get the following error when I try to run 'yum update': Package libuser-0.54.7-2.1.el5_5.2.x86_64.rpm is not signed and yum update exits without applying any of the patches. I tried clearing the cache and re-running the update command but I get the same error. Any help with this would be much appreciated. Best regards, Andre

7 10

SNMP monitoring options
by aurfalien＠gmail.com 20 Apr '11

20 Apr '11

Hi all, Been using Cacti for monitoring various things like, system disk/mem/ proc, network usage, router usage etc... While its been fun, the graphs are just unruly. Was looking an OpsView (the free version), wondering what your experience with this type of trend/heuristic analysis has been and what what you like. And of course thoughts on OpsView. - aurf

11 21

CentOS-announce Digest, Vol 74, Issue 6
by centos-announce-request＠centos.org 20 Apr '11

20 Apr '11

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2011:0450 CentOS 4 i386 x86_64 xorg-x11 Update (Johnny Hughes) 2. CEEA-2011:0408 CentOS 4 i386 x86_64 tzdata Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Apr 2011 06:38:25 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2011:0450 CentOS 4 i386 x86_64 xorg-x11 Update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <4DAEC5B1.4010305(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Bugfix Advisory CEBA-2011:0450 xorg-x11 bugfix update for CentOS 4 i386 and x86_64: https://rhn.redhat.com/errata/RHBA-2011-0450.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: xorg-x11-6.8.2-1.EL.68.i386.rpm xorg-x11-deprecated-libs-6.8.2-1.EL.68.i386.rpm xorg-x11-deprecated-libs-devel-6.8.2-1.EL.68.i386.rpm xorg-x11-devel-6.8.2-1.EL.68.i386.rpm xorg-x11-doc-6.8.2-1.EL.68.i386.rpm xorg-x11-font-utils-6.8.2-1.EL.68.i386.rpm xorg-x11-libs-6.8.2-1.EL.68.i386.rpm xorg-x11-Mesa-libGL-6.8.2-1.EL.68.i386.rpm xorg-x11-Mesa-libGLU-6.8.2-1.EL.68.i386.rpm xorg-x11-sdk-6.8.2-1.EL.68.i386.rpm xorg-x11-tools-6.8.2-1.EL.68.i386.rpm xorg-x11-twm-6.8.2-1.EL.68.i386.rpm xorg-x11-xauth-6.8.2-1.EL.68.i386.rpm xorg-x11-xdm-6.8.2-1.EL.68.i386.rpm xorg-x11-Xdmx-6.8.2-1.EL.68.i386.rpm xorg-x11-xfs-6.8.2-1.EL.68.i386.rpm xorg-x11-Xnest-6.8.2-1.EL.68.i386.rpm xorg-x11-Xvfb-6.8.2-1.EL.68.i386.rpm x86_64: xorg-x11-6.8.2-1.EL.68.x86_64.rpm xorg-x11-deprecated-libs-6.8.2-1.EL.68.i386.rpm xorg-x11-deprecated-libs-6.8.2-1.EL.68.x86_64.rpm xorg-x11-deprecated-libs-devel-6.8.2-1.EL.68.i386.rpm xorg-x11-deprecated-libs-devel-6.8.2-1.EL.68.x86_64.rpm xorg-x11-devel-6.8.2-1.EL.68.i386.rpm xorg-x11-devel-6.8.2-1.EL.68.x86_64.rpm xorg-x11-doc-6.8.2-1.EL.68.x86_64.rpm xorg-x11-font-utils-6.8.2-1.EL.68.x86_64.rpm xorg-x11-libs-6.8.2-1.EL.68.i386.rpm xorg-x11-libs-6.8.2-1.EL.68.x86_64.rpm xorg-x11-Mesa-libGL-6.8.2-1.EL.68.i386.rpm xorg-x11-Mesa-libGL-6.8.2-1.EL.68.x86_64.rpm xorg-x11-Mesa-libGLU-6.8.2-1.EL.68.i386.rpm xorg-x11-Mesa-libGLU-6.8.2-1.EL.68.x86_64.rpm xorg-x11-sdk-6.8.2-1.EL.68.x86_64.rpm xorg-x11-tools-6.8.2-1.EL.68.x86_64.rpm xorg-x11-twm-6.8.2-1.EL.68.x86_64.rpm xorg-x11-xauth-6.8.2-1.EL.68.x86_64.rpm xorg-x11-xdm-6.8.2-1.EL.68.x86_64.rpm xorg-x11-Xdmx-6.8.2-1.EL.68.x86_64.rpm xorg-x11-xfs-6.8.2-1.EL.68.x86_64.rpm xorg-x11-Xnest-6.8.2-1.EL.68.x86_64.rpm xorg-x11-Xvfb-6.8.2-1.EL.68.x86_64.rpm src: xorg-x11-6.8.2-1.EL.68.src.rpm

1 0

is the list dead?
by Rudi Ahlers 20 Apr '11

20 Apr '11

Is the list dead, or just quiet all of the sudden? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

4 4

glibc-2.5-58.el5_6.2.i686 broken?
by Leonard den Ottolander 20 Apr '11

20 Apr '11

Hi, I woke up Saturday morning unable to boot my freshly upgraded 5.6 with grub hanging at "GRUB". After getting the boot loader fixed I experienced crashes in evolution. Downgrading glibc to 2.5-58 seems to fix these issues. Anyone else seeing this? Leonard. -- mount -t life -o ro /dev/dna /genetic/research

20 43

Named, logging of requests
by Jussi Hirvi 20 Apr '11

20 Apr '11

This is not really CentOS-specific - sorry. On a name server, I would like to log ns queries (specifically, queries which result with no answer) regarding one domain (for which my ns is authoritative). Is this possible? I know you can turn on logging "globally" using the logging section of named.conf. - Jussi -- Jussi Hirvi * Green Spot Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

1 0

Cant find out MCE reason (CPU 35 BANK 8)
by Vladimir Budnev 20 Apr '11

20 Apr '11

Hello community. We are running, Centos 4.8 on SuperMicro SYS-6026T-3RF with 2xIntel Xeon E5630 and 8xKingston KVR1333D3D4R9S/4G For some time we have lots of MCE in mcelog and we cant find out the reason. "Ordinary" mce message looks like: CPU 51 BANK 8 TSC 8511e3ca77dc MISC 274d587f00006141 ADDR 807044840 STATUS cc0055000001009f MCGSTATUS 0 decode with mcelog --ascii --cpu p4(cause there is no xeon56xx in list): HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 53 BANK 8 TSC 1982d8f72b1f MISC e1742eac00006242 ADDR 7ffd78a80 MCG status: MCi status: Error overflow MCi_MISC register valid MCi_ADDR register valid MCA: MEMORY CONTROLLER RD_CHANNELunspecified_ERR Transaction: Memory read error STATUS cc0002000001009f MCGSTATUS 0 The global question is it possible to find out the exact hw which causes those messages? First we thought that according to /* A machine check record */ struct mce { __u64 status; /* bank status register */ __u64 misc; /* misc register (always 0 right now) */ __u64 addr; /* address or 0 */ __u64 mcgstatus; /* global MC status register */ __u64 rip; /* Program counter or 0 for silent error */ __u64 tsc; /* cpu time stamp counter */ __u64 res1; /* for future extension */ __u64 res2; /* dito. */ __u8 cs; /* code segment */ __u8 bank; /* machine check bank */ __u8 cpu; /* cpu that raised the error */ __u8 finished; /* entry is valid */ __u32 pad; }; cpu is the cpu rised the exception, but we have 2 quadro cpus with HT so maximum cpu number should be 16 and in logs we see 53 etc. So no we r not sure about what cpu value is :)Does anyone know what the CPU number means exactly? One more interesting thins is the following output: [root@zuno]# cat /var/log/mcelog |grep CPU|sort|awk '{print $2}'|uniq 32 33 34 35 50 51 52 53 Those numbers are always the same. Ok.Supposed we have problem in RAM, since i dont really know what those cpu numbers mean we suppose that cpu+bank can point the problem hw.Is it possible? According to our "broken ram theory" we suppose that those numbers 32,33,34,45 and 50,51,52,53 indicate some simetric problem with ram/or slots or smth else.Is it correct? Thanks in advance.

5 19

Can anyone post a working pppd config?
by johhny_at_poland77 19 Apr '11

19 Apr '11

I just need a "temporary" pppoe server, that only uses PAP ___Can someone post a howto, just in a few lines, what to do?___ If I just do "pppd require-pap" then it gives this error: pppd: The remote system is required to authenticate itself pppd: but I couldn't fin any suitable secret (password) for it to use to do so. pppd is by default installed. and there are just a few modifications needed to start it with only using PAP auth.. what am I missing? It's not needed, that the clients actually log in through pppoe, I just need a pppoe server that enforces PAP, so that we could get the passwords of the clients... Thank you in anticipation..!!

6 7

cross-platform email client
by Florin Andrei 19 Apr '11

19 Apr '11

I'm a Thunderbird user almost since day one, but now I'm looking for something else. For whatever reason, it doesn't work well for me - every once in a while it becomes non-responsive (UI completely frozen for several seconds, CPU usage goes to 100%) and I just can't afford to waste time waiting for the email software to start working again. My main desktop platform is Linux, but I need a client that works the same and looks the same on Windows too. Email server is IMAP with a pretty hefty account: over a hundred folders, hundreds of thousands of messages total (server-side filtering with Sieve). Typically it's a remote session, over VPN. So the client better work well, and be glitch-free. The issues with Thunderbird might be related to the size of my IMAP account, plus the VPN latency - but frankly, I don't care, the client needs to hide all that stuff from me, do the updates or whatever in the background, instead of blocking the UI until it's done. Ironically, it blocked when I was done with this paragraph and I hit Enter. Sticking it to the man one last time, I guess. Any suggestions? Thanks. -- Florin Andrei http://florin.myip.org/

10 17

/etc/bashrc help!
by Roland Roland 19 Apr '11

19 Apr '11

Dear all, i've appended the below to /etc/bashrc it works like a charm with ssh connections though SFTP sessions fail since the below is being sent to the intiator. any way of limiting the below to none sftp sessions? or any other idea for it to work? # If id command returns zero, you’ve root access. if [ $(id -u) -eq 0 ]; then # you are root, set red colour prompt echo "###############################################" echo "### You are now working as ROOT. ###" echo "### Pay attention to what you type. ###" echo "###############################################" PS1="\\[$(tput setaf 1)\\]\\u@\\h:\\w #\\[$(tput sgr0)\\]" else # normal echo echo " ###########################################################" echo "Welcome $(whoami), here's something to start your day with:" echo echo `sh /etc/lines.sh /etc/quotes.txt` echo " ############################################################" echo PS1="[\\u@\\h:\\w] $" fi Thanks, --Roland

5 5

Centos 5.3, Firefox, and JRE
by Eric Kaufmann 19 Apr '11

19 Apr '11

I can't get java applets to run in Firefox. We are using centos 5.3, firefox 3.0.11. Java version 1.6.0_24 is installed. java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07) Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode) I know there has been allot written about this issue. I did look and there is no jre plug in installed for Firefox. I tried to reinstall java and this did not work either. Any ideas? Eric -- Eric Kaufmann | Application Support Analyst - Advanced Technology Group | Saint Louis University | 314-977-2257 | kaufmann(a)slu.edu | Interested in High Performance Computing? Visit us at http://rocks64.slu.edu/atg .

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss