- Discuss - lists.centos.org

How to remove USB dependency form the boot process.
by Vijay Shanker Dubey 19 May '10

19 May '10

Hi friend, I have just installed the centos 5.3 on my server machine. It looks for a USB media to boot. But I am not able to figure it out what i have done wrong. Is there any way i can remove this dependency. Or I have to reinstall the OS again? Regards, Vijay Shanker Dubey

2 1

problem with bridged network for a kvm guest
by Negative 19 May '10

19 May '10

I'm having trouble with the bridged network setup. I'm new to kvm, but I got a window xp sp2 guest set up without trouble a few days ago. I followed the instructions in the RH virtualization guide, and all was fine until I had to reboot the host machine a few days later. Then, I lost networking altogether on the host machine. I lost track of all the things I tried, but finally got networking back on the host, but I suspect it's not right. For one thing, I deleted ifcfg-br0. Also, I commented out bridge=br0 in ifcfg-eth0. Oddly, ifconfig shows both interfaces, and shows them both set to static ip. One of the points I'm confused about is what, if anything, to write for the ip address in ifcfg-eth0. When I first set it up, I set the bridge interface to dhcp, and kept the host as a static ip on my lan. That made made the host dhcp, but that's no good for me, so I set the ip in ifcfg-br0 to my static ip, and everything worked fine, even though it didn't make sense that both eth0 and br0 had the same ip. Thanks for any guidance.

2 1

VNC failed to initialize HAL
by sync 19 May '10

19 May '10

Hi,all: Today, I use the vnc tool to connect the server , but it has the following message: test@xxx: ~ vi ~/.vnc/xxx:1.log .. ... libhal.c 644 : Error connecting to system bus: Message did not receive a reply

1 0

A
by Greg Marcom 19 May '10

19 May '10

6 5

[Fwd: Re: iptables]
by Niki Kovacs 19 May '10

19 May '10

7 10

Package Information Site?
by Tim Nelson 18 May '10

18 May '10

Greetings all- Over the years, I've become incredibly spoiled by 'packages.debian.org' which allows me to search for a package, view it's description, download it, see dependencies, see similar packages, etc... Does such a site or resource exist for CentOS? Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105

5 5

Useful NFS hint
by Stephen Harris 18 May '10

18 May '10

Don't do NFS localhost mounts from fstab eg localhost:/origdir /newdir nfs ro 0 0 (Indeed, don't do localhost NFS mounts at all). Why? Because at shutdown time nfsd is terminated before the unmounting, so the shutdown hangs trying to access NFS server localhost. And at boot time it tries to do NFS mounts before nfsd starts up. _sigh_ -- rgds Stephen

8 10

Update successful. Thanks.
by Ron Blizzard 18 May '10

18 May '10

My desktop updated without a hitch... well, actually, I ran out of disk space after the download completed, so had to clear some space, but the update process continued from where I left off without a hitch -- and that's hardly CentOS's fault. I've still got to update my laptop, but am a little leery, because I think I've a got a hard drive failing. At any rate, thank you *again* for all your hard work. I don't know if I'm imagining it or not, but overall speed seems to be slightly "snappier" with the new update. -- RonB CentOS 5.5 - Optiplex GX270

8 11

rsync - dirs and symlinks only, not contents
by aurfalien＠gmail.com 17 May '10

17 May '10

Hi all, I have a need to copy only dirs, subdirs and sym links only without the need to copy contents. I originally used the following test to observe behavior; rsync -a -f"+ */" -f"- *" source destination So I noticed that dirs/subdirs were copied but without contents as desired. I have several sym links (dir sym links) that I would also to to copy over. I tried this; rsync -a -f"+ */" -f"- * -l" source destination Although my sym links show, they are broken. Any thoughts on how to copy dirs, subdirs and sym links only w/o contents?

3 3

route question
by Jerry Geis 17 May '10

17 May '10

My current route for a box shows this: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 24.123.23.168 0.0.0.0 255.255.255.248 U 0 0 0 eth2 74.223.8.176 0.0.0.0 255.255.255.240 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 0.0.0.0 24.123.23.169 0.0.0.0 UG 0 0 0 eth2 How do I setup the 74.223.8.176 route so on boot the gateway will automatically be set to 74.223.8.177 Thanks, Jerry

9 15

Apparent BIND problem doing RBL lookups for Postfix
by listserv.traffic＠sloop.net 17 May '10

17 May '10

My apologies if I'm posting the wrong place, or am asking a common question. All my looking so far hasn't turned up anything very useful in knowing what to look at, or what to modify. --- CentOS 5, running BIND 9.3.6 i386 Hardware: P4, 2.8Ghz, 1G memory Sata drives - non mirrored etc. Load is light, usually under 0.1 -- This box is running Postfix as our mail server. BIND (9.3.6) [Latest.] -- Problem: Postfix is doing RBL lookups on zen.spamhaus.org. Everything goes along groovy - but then lookups start failing. Early in the process, we get stuff like this: [We have a "successful" lookup, and then a failure...] --- Apr 14 14:25:05 mail postfix/smtpd[22281]: NOQUEUE: reject: RCPT from bzq-79-183-5-119.red.bezeqint.net[79.183.5.119]: 554 5.7.1 Service unavailable; Client host [79.183.5.119] blocked using zen.spamhaus.org; from=<contriveclaudia(a)royalmoore.com> to=<contriveclaudia(a)royalmoore.com> proto=SMTP helo=<bzq-79-183-5-119.red.bezeqint.net> Apr 14 14:25:07 mail postfix/smtpd[22804]: warning: 33.229.242.205.zen.spamhaus.org: RBL lookup error: Host or domain name not found. Name service error for name=33.229.242.205.zen.spamhaus.org type=A: Host not found, try again --- As you can see, we had a lookup succeed and then just right after, one fail - claiming it got no answer from BIND. I get others after this that SUCCEED - so it's not in 100% failure mode yet. After time [how much, I don't know] eventually all the zen queries [or most all] fail. A bind restart fixes the problem. [Hmmm...] --- I do some logging in bind, and I don't see any reason for them to fail. Here's a bind debug log of 5 on that failure above. --- 14-Apr-2010 14:24:57.654 queries: info: client 127.0.0.1#42018: query: 33.229.242.205.zen.spamhaus.org IN A + 14-Apr-2010 14:24:57.654 security: debug 3: client 127.0.0.1#42018: query (cache) '33.229.242.205.zen.spamhaus.org/A/IN' approved 14-Apr-2010 14:24:57.654 resolver: debug 1: createfetch: 33.229.242.205.zen.spamhaus.org A 14-Apr-2010 14:24:57.654 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): create 14-Apr-2010 14:24:57.654 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): join 14-Apr-2010 14:24:57.654 resolver: debug 3: fetch 0x94a0b20 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) created 14-Apr-2010 14:24:57.655 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): start 14-Apr-2010 14:24:57.655 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:24:57.655 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelqueries 14-Apr-2010 14:24:57.655 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): getaddresses 14-Apr-2010 14:24:57.655 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:24:57.655 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:24:57.655 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:24:57.655 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:24:57.655 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:24:59.657 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:24:59.657 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:24:59.657 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:24:59.657 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:24:59.657 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:24:59.657 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:24:59.657 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:24:59.657 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:01.658 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:01.658 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:01.658 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:01.658 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:01.658 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:01.659 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:01.659 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:01.659 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:02.653 queries: info: client 127.0.0.1#42018: query: 33.229.242.205.zen.spamhaus.org IN A + 14-Apr-2010 14:25:02.653 security: debug 3: client 127.0.0.1#42018: query (cache) '33.229.242.205.zen.spamhaus.org/A/IN' approved 14-Apr-2010 14:25:02.654 resolver: debug 1: createfetch: 33.229.242.205.zen.spamhaus.org A 14-Apr-2010 14:25:02.654 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): join 14-Apr-2010 14:25:02.654 resolver: debug 3: fetch 0x94d54c8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) created 14-Apr-2010 14:25:03.660 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:03.660 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:03.660 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:03.660 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:03.660 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:03.660 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:03.660 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:03.660 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:03.660 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:05.663 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:05.663 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:05.663 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:05.663 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:05.663 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:05.663 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:05.663 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:05.663 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:05.663 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:07.664 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:07.664 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:07.664 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:07.664 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:07.664 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:07.664 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:07.665 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:07.665 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:07.665 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:08.393 queries: info: client 127.0.0.1#50896: query: 33.229.242.205.zen.spamhaus.org IN A + 14-Apr-2010 14:25:08.393 security: debug 3: client 127.0.0.1#50896: query (cache) '33.229.242.205.zen.spamhaus.org/A/IN' approved 14-Apr-2010 14:25:08.393 resolver: debug 1: createfetch: 33.229.242.205.zen.spamhaus.org A 14-Apr-2010 14:25:08.393 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): join 14-Apr-2010 14:25:08.393 resolver: debug 3: fetch 0x94ad9c8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) created 14-Apr-2010 14:25:09.666 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:09.666 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:09.666 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:09.666 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:09.666 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:09.666 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:09.666 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:09.666 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:09.666 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:11.668 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:11.668 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:11.668 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:11.668 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:11.668 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:11.668 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:11.668 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:11.668 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:11.668 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:13.669 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:13.669 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:13.669 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:13.669 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:13.669 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:13.669 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:13.670 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:13.670 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:13.670 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:15.671 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:15.671 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:15.671 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:15.671 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:15.671 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:15.671 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:15.671 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:15.671 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:15.671 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:17.673 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:17.673 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:17.673 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:17.673 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:17.673 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:17.673 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:17.673 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:17.673 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:17.673 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:19.674 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:19.674 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:19.674 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:19.674 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:19.674 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:19.674 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:19.675 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:19.675 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:19.675 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:21.676 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:21.676 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:21.676 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:21.676 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:21.676 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:21.676 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:21.676 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:21.676 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:21.676 resolver: debug 3: resquery 0x940ec38 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:23.677 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): timeout 14-Apr-2010 14:25:23.678 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:23.678 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): try 14-Apr-2010 14:25:23.678 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): query 14-Apr-2010 14:25:23.678 resolver: debug 3: resquery 0x94ae7b8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) send 14-Apr-2010 14:25:23.678 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): too many timeouts, disabling EDNS0 14-Apr-2010 14:25:23.678 resolver: debug 3: resquery 0x94ae7b8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) sent 14-Apr-2010 14:25:23.678 resolver: debug 3: resquery 0x94ae7b8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) udpconnected 14-Apr-2010 14:25:23.678 resolver: debug 3: resquery 0x94ae7b8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) senddone 14-Apr-2010 14:25:23.912 resolver: debug 3: resquery 0x94ae7b8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) response 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): noanswer_response 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): ncache_message 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): clone_results 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelquery 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): done 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): stopeverything 14-Apr-2010 14:25:23.912 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelqueries 14-Apr-2010 14:25:23.913 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): sendevents 14-Apr-2010 14:25:23.913 resolver: debug 3: fetch 0x94a0b20 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) destroyfetch 14-Apr-2010 14:25:23.913 resolver: debug 3: fetch 0x94d54c8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) destroyfetch 14-Apr-2010 14:25:23.913 resolver: debug 3: fetch 0x94ad9c8 (fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A)) destroyfetch 14-Apr-2010 14:25:23.914 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): shutdown 14-Apr-2010 14:25:23.914 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): doshutdown 14-Apr-2010 14:25:23.914 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): stopeverything 14-Apr-2010 14:25:23.914 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): cancelqueries 14-Apr-2010 14:25:23.914 resolver: debug 3: fctx 0x932e140(33.229.242.205.zen.spamhaus.org/A'): destroy --- As far as I can see, the BIND query simply didn't get a response - but no errors? --- First, someone's going to ask - perhaps Zen's blocking you. I don't think so. Here's why. -We're non-commercial, using the definition set my spamhaus, -mail connects TOTAL are well less than 100K a day. (Less than 10K in actuality) -and thus having more than 300K queries is pretty unlikely. -Also, let me remind you that a restart of the bind service seems to make the failures go away for a while, so if zen were blocking our queries, I'd think that wouldn't make a difference. --- I certainly suspect a problem with BIND, but I can't find it, and have no idea where to go from here. I simply don't know where to look any more. If BIND were having a problem, say allocating memory, or something, shouldn't it be in a debug level 5 log? HELP! -Greg [Cross posted from elsewhere, but I'm at a dead-end right now, so looking for a steer in where to ask, or direct help! TIA]

11 20

decent WMS on CentOS?
by dnk 17 May '10

17 May '10

Can anyone recommend a decent WMS (Warehouse Management System) that runs on CentOS decently? Thank you. DNK

2 1

upgrading to a minor release 4.1 to 4.2
by sheraz naz 17 May '10

17 May '10

Hi, I need to upgrade a system running 4.1 to 4.2, but before I do I want to list out all the packages that will be updated/installed/removed. I can run up2date -l to get a list of updates but does that show packages that need to be installed and removed as well or just the updates? Second, how would I go about upgrading 4.1 to 4.2 instead of 4.8 (i.e. latest update). Unfortunately I don't have access to centos 4.x at the moment.and googling just centos 4.1 to 4.2 is not bringing up relevant information. Thanks Sheraz

7 12

release of 5.5? (filesystem troubles)
by Rainer Fuegenstein 17 May '10

17 May '10

hi guys, is there an estimate when centos 5.5 will be released? I'm sitting on needles here, because since I moved my 4*1.5TB raid5 from an asus to an intel D510 mainboard I encounter bug the described here: https://bugzilla.redhat.com/show_bug.cgi?id=512552 short version: running xfs on top of a raid5 under heavy load causes corrupted data to be read and the filesystem shutting down occasionally. version 5.5 should solve this problem. if 5.5 is just a few days away I'll keep waiting, but if it takes much longer I'll need to work around this problem like going back to the old mainboard, compiling the kernel myself, switching to ext3 - none of which I'm eager to do. cu

9 12

Free and Robust Hotspot Management Software ?
by Roberto HT 17 May '10

17 May '10

Dear all, Could anybody give me some recommended open source software for wifi management? What I am looking for is a simple and basic tools, for example the software will have these kind of features : - user connect to the wifi network - user got IP from DHCP but he can't browse to anywhere at first. Instead he will redirected to a "login page" - administrator will set the username and password (e.g : user1, password ; user2, password2) - if needed, the username will be enabled and be given to the user - if unused, the username will simply be disabled so no authenticated user could connect eventhough they remember the password. - I don't need the billing system just the administration tools. I already googled and found chillispot, but it seemed to be an overkill software. Are there anything simpler than chillispot? Thanks. Roberto

6 6

RHEL 6 Beta available for public download
by Timo Schoeler 17 May '10

17 May '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 http://press.redhat.com/2010/04/21/red-hat-enterprise-linux-6-beta-availabl… ...says it all. Have phun! Timo -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFLzuMEfg746kcGBOwRAgjYAJ9QkJvm40sOVAOcUk4edQ98bM5CKgCgomte W8RuS+4FvyB/54jUnP+bT+A= =m6zn -----END PGP SIGNATURE-----

16 22

bluetooth mouse
by Roger K. Wells 17 May '10

17 May '10

Hello, I believe that it is well known that the scroll wheel on the Microsoft Bluetooth Mouse 5000 does not work on CentOS 5.4. It does, however, work as expected on Fedora 12 & Ubuntu 9.10 & 10.04. Does anyone know if there is a driver upgrade path for CentOS that will fix this problem? Thanks, roger wells -- Roger Wells, P.E. SAIC 221 Third St Newport, RI 02840 401-847-4210 (voice) 401-849-1585 (fax) roger.k.wells(a)saic.com

1 0

centos release 5.5 issue
by Philip Manuel 17 May '10

17 May '10

Hi One of our developers has come across an issue with the new release. He provided this piece of code to show the problem:- cat failure.c #include </usr/include/asm-x86_64/msr.h> int main( int argc, char* argv[] ) { return 0; } gcc failure.c /usr/include/asm-x86_64/msr.h:169: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h:169: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h:169: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h: In function ‘rdmsr_on_cpu’: /usr/include/asm-x86_64/msr.h:171: error: ‘l’ undeclared (first use in this function) /usr/include/asm-x86_64/msr.h:171: error: (Each undeclared identifier is reported only once /usr/include/asm-x86_64/msr.h:171: error: for each function it appears in.) /usr/include/asm-x86_64/msr.h:171: error: ‘h’ undeclared (first use in this function) /usr/include/asm-x86_64/msr.h:171: error: ‘msr_no’ undeclared (first use in this function) /usr/include/asm-x86_64/msr.h:171: error: invalid lvalue in asm output 0 /usr/include/asm-x86_64/msr.h:171: error: invalid lvalue in asm output 1 /usr/include/asm-x86_64/msr.h: At top level: /usr/include/asm-x86_64/msr.h:173: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h:173: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h:173: error: expected declaration specifiers or ‘...’ before ‘u32’ /usr/include/asm-x86_64/msr.h: In function ‘wrmsr_on_cpu’: /usr/include/asm-x86_64/msr.h:175: error: ‘msr_no’ undeclared (first use in this function) /usr/include/asm-x86_64/msr.h:175: error: ‘l’ undeclared (first use in this function) /usr/include/asm-x86_64/msr.h:175: error: ‘h’ undeclared (first use in this function) Anyone else seen this or found a bug with these function definitions ? Thanks Phil

2 1

Re: [CentOS] Yum segmentation fault when updating to CentOS v5.5
by Sorin Srbu 17 May '10

17 May '10

>-----Original Message----- >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf >Of Sorin Srbu >Sent: Monday, May 17, 2010 11:22 AM >To: 'CentOS mailing list' >Subject: Re: [CentOS] Yum segmentation fault when updating to CentOS v5.5 > >>-----Original Message----- >>From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On >Behalf >>Of cornel panceac >>Sent: Monday, May 17, 2010 10:59 AM >>To: CentOS mailing list >>Subject: Re: [CentOS] Yum segmentation fault when updating to CentOS v5.5 >> >> I'm getting a segmentation fault with yum when I try to update a >>CentOS v5.4 >> install to v5.5. >> >> >> >>try updating only some of the packages. if there's one package which can >not be >>updated with yum, rpm -Uvh > >Tried with yum update kernel*, yum update kernel-headers, yum update *lib* >and yum update httpd. Still gives me the seg fault error. 8-/ Never mind this problem. Just tried to start httpd and it gave me a segmentation fault as well. Something is not right with this particular machine and I think it's for the best to do a complete reinstall anyway. Thanks all. -- /Sorin

1 0

Re: [CentOS] Yum segmentation fault when updating to CentOS v5.5
by cornel panceac 17 May '10

17 May '10

2010/5/17 Sorin Srbu <sorin.srbu(a)orgfarm.uu.se> > Hi all, > > I'm getting a segmentation fault with yum when I try to update a CentOS > v5.4 > install to v5.5. > try updating only some of the packages. if there's one package which can not be updated with yum, rpm -Uvh -- Among the maxims on Lord Naoshige's wall, there was this one: "Matters of great concern should be treated lightly." Master Ittei commented, "Matters of small concern should be treated seriously." (Ghost Dog : The Way of The Samurai)

2 1

Re: [CentOS] Yum segmentation fault when updating to CentOS v5.5
by Mogens Kjaer 17 May '10

17 May '10

On 05/17/2010 10:46 AM, Sorin Srbu wrote: ... > Any other tips, tricks or hints I could try? Can you strace the yum update process and see what happens before it crashes? Mogens -- Mogens Kjaer, Carlsberg A/S, Computer Department Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark Phone: +45 33 27 53 25, Mobile: +45 22 12 53 25 Email: mk(a)crc.dk Homepage: http://www.crc.dk

2 1

Yum segmentation fault when updating to CentOS v5.5
by Sorin Srbu 17 May '10

17 May '10

Hi all, I'm getting a segmentation fault with yum when I try to update a CentOS v5.4 install to v5.5. What I've done: * Ran yum clean all. * Ran yum update yum* * Ran yum update, and got the segmentation fault. * Yum suggested running with option --skip-broken, which I did. Still got the segmentation fault. * Rebooted machine and ran yum update again. Segmentation fault... * Googled some and found some hints on rebuilding the rpm-database, which I did. * Ran yum update again. Got segmentation fault again. * Disabled all 3rd party repos, rpmforge and epel, tried yum update again and got seg fault. * Disabled all plugins; priorities, fastestmirror and kmod, tried yum pdate again and got seg fault yet again. * Removed /var/cache/yum and ran yum update. Got a seg fault. Any other tips, tricks or hints I could try? FWIW, this is the only machine I've had this problem with. All others I've updated to v5.5 so far have worked w/o a hitch as upgrades go. Thanks for any help. -- BW, Sorin ----------------------------------------------------------- # Sorin Srbu [Sysadmin, Systems Engineer] # Dept of Medicinal Chemistry, Phone: +46 (0)18-4714482 >3 signals> GSM # Div of Org Pharm Chem, Mobile: +46 (0)701-718023 # Box 574, Uppsala University, Fax: +46 (0)18-4714482 # SE-751 23 Uppsala, Sweden Visit: BMC, Husargatan 3, D5:512b # Web: http://www.orgfarm.uu.se ----------------------------------------------------------- # () ASCII ribbon campaign - Against html E-mail # /\ # # MotD follows: # Multitasking /adj./ 3 PCs and a chair with wheels!

1 0

measuring kernel speed
by Mag Gam 17 May '10

17 May '10

At our Physics research labs we do a lot with low latency networks. We have been using Centos for over 3 years now and its been great! We would like to tune and optimize our setup by removing unneeded packages -- kernel modules to be specific. I was wondering, how does one measure the speed of the kernel. Is that even possible?

14 49

update to 5.5 small issues
by fred smith 17 May '10

17 May '10

a couple hours after the update (and requisite reboot and reinstallation of nvidia proprietary driver), I noticed I wasn't gettting any email. upon a little investigation, I noted that the update had replaced my custom sendmail.cf with its own. I don't recall updates to sendmail doing that previously,.... also, around that time my panels stopped unhiding, so they remained in a hidden state that I could not recover them from. logged off and on and it didn't help, in fact it was worse: no panels at all. so I did a reboot and now they seem to be working. I'll have to keep an eagle-eye on them. so far, all else seems well. Thanks to the whole team who makes Centos possible! -- ------------------------------------------------------------------------------- .---- Fred Smith / ( /__ ,__. __ __ / __ : / / / / /__) / / /__) .+' Home: fredex(a)fcshome.stoneham.ma.us / / (__ (___ (__(_ (___ / :__ 781-438-5471 -------------------------------- Jude 1:24,25 ---------------------------------

5 8

CentOS-announce Digest, Vol 63, Issue 2
by centos-announce-request＠centos.org 16 May '10

16 May '10

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS-5.5 i386 and x86_64 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 May 2010 23:32:30 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Release for CentOS-5.5 i386 and x86_64 To: centos-announce(a)centos.org Cc: distro(a)distrowatch.com Message-ID: <4BEDCF7E.5010901(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed We are pleased to announce the immediate availability of CentOS-5.5 for i386 and x86_64 Architectures. CentOS-5.5 is based on the upstream release EL 5.5 and includes packages from all variants including Server and Client. All upstream repositories have been combined into one, to make it easier for end users to work with. This is just an announcement email, not the release notes. The Release Notes for CentOS-5.5 can be found on-line at : http://wiki.centos.org/Manuals/ReleaseNotes/CentOS5.5 and everyone is encouraged to look through them once. Also worth browsing through are the CentOS FAQs at http://wiki.centos.org/FAQ +++++++++++++++++++++++ Upgrading from CentOS-5.4 ( or CentOS-5.0 / 5.1 / 5.2 / 5.3 ): If you are already running CentOS-5.4 or an older CentOS-5 distro, all you need to do is update your machine via yum by running : 'yum update' Running 'yum list updates' before doing the update is recommended, so you can get a list of packages that are going to be updated. To check you are indeed on CentOS-5.5, run : 'rpm -q centos-release' and that should return: 'centos-release-5-5.el5.centos' +++++++++++++++++++++++ Live-CD: LiveCDs for CentOS-5.5 on i386 and x86_64 are being released at the same time as the main distro. The LiveCDs are meant to be used to run a CentOS 5.5 environment or to start a network based install. The LiveCDs are setup in a way so as to allow running from either optical media like cds and dvds or from USB keys and other portable media. +++++++++++++++++++++++ Change in iso counts: The i386 distro is now spread onto 7 CD iso files, while the x86_64 distro is now 8 CD isos. The x86_64 DVD set is now spread over 2 DVD isos, while the i386 DVD remains as 1 iso file. We've had to split the x86_64 dvd media over multiple disks due to the increase in the binary packages size. We have, however, tried to build them in a way that dvd#1 should be all that is needed by most people. x86_64 DVD#2 is limited to some OpenOffice.org language packages. x86_64 DVD#1 includes the rest of the distro and also includes the most popular OpenOffice.org language packs. More details on the exact split are available in the Release Notes. +++++++++++++++++++++++ Downloading CentOS-5.5 for new installs: When possible, consider using torrents to run the downloads. Not only does it help the community and keeps mirrors from running up high bandwidth bills, in most cases you will find its also the fastest means to download the distro. There are currently over three hundred people seeding CentOS-5 and it's possible to get upto 100mbps downloads via these torrents. -- Via BitTorrent : CD: http://mirror.centos.org/centos/5.5/isos/i386/CentOS-5.5-i386-bin-1to7.torr… http://mirror.centos.org/centos/5.5/isos/x86_64/CentOS-5.5-x86_64-bin-1to8.… DVD: http://mirror.centos.org/centos/5.5/isos/i386/CentOS-5.5-i386-bin-DVD.torre… http://mirror.centos.org/centos/5.5/isos/x86_64/CentOS-5.5-x86_64-bin-DVD.t… LiveCD: http://mirror.centos.org/centos/5.5/isos/i386/CentOS-5.5-i386-LiveCD.torrent http://mirror.centos.org/centos/5.5/isos/x86_64/CentOS-5.5-x86_64-LiveCD.to… md5sum's for these torrent files: cdc45af66bf92987ada310e251d43398 CentOS-5.5-i386-bin-1to7.torrent 5f623a38eab7f5eae21c3c4e3fe80c04 CentOS-5.5-x86_64-bin-1to8.torrent 489aba8ea3d9f82973728813f5c1d0ad CentOS-5.5-x86_64-bin-DVD.torrent a001e84db58e59113a83cf06730bf7fc CentOS-5.5-i386-bin-DVD.torrent 3836afe12e27435ff928e35f2d85db10 CentOS-5.5-i386-LiveCD.torrent 55a40ba2e170a6bd424732d4c4116041 CentOS-5.5-x86_64-LiveCD.torrent -- Via direct download: Due to bandwidth considerations the CentOS Project does not publish ISOS directly from our network machines. However direct downloads are available from external mirrors over http, ftp and rsync. A geoip based list is available at http://isoredirect.centos.org/centos/5/isos/ to give you the best predictable match ( and only lists mirrors that are updated already, so you don't need to waste time looking for a sync'd mirror ) Some mirrors also publish DVD images that can be downloaded directly. Refer to the mirrors list page at http://www.centos.org/mirrors for more details Mirrors that offer DVDs are clearly marked on the page. sha1sum for these ISOS: i386: 2ace21ada6705ed2893b651927bca612ac0882a2 CentOS-5.5-i386-bin-1of7.iso febe79c5b42b1b1038ed748500e231dd6565a8e5 CentOS-5.5-i386-bin-2of7.iso f9772b5c9e5bb4d2da748cb6c4c38a4a5c1a2cf9 CentOS-5.5-i386-bin-3of7.iso 0b86a414fadb9f0981ef3cb862aba8b9ace82f76 CentOS-5.5-i386-bin-4of7.iso 8ae4b28c6d551600d6b1eab2677153b5c0d3b1c6 CentOS-5.5-i386-bin-5of7.iso 9a8c36abd230ced70ca600c540c2b06aa6e91497 CentOS-5.5-i386-bin-6of7.iso 4ef1f284961f3e035ec2641cabec86048317939f CentOS-5.5-i386-bin-7of7.iso 48c158fb9446148432a07634b2688915a279580b CentOS-5.5-i386-bin-DVD.iso 2745b4b1082a604405e14635bf1fb4638b3f45c2 CentOS-5.5-i386-LiveCD.iso 37aa393aef7e6aa2d19607f45eeed9ae7e63f0fb CentOS-5.5-i386-netinstall.iso x86_64: 0c27f508728f6a96f50e4201cd770fe9e57af3e2 CentOS-5.5-x86_64-bin-1of8.iso ff57db0cf9af9bfc65471f49444ea92cdc238347 CentOS-5.5-x86_64-bin-2of8.iso 0faf38976fbf4053180a25f7535d66b084092059 CentOS-5.5-x86_64-bin-3of8.iso b097bf9b747f2d16da00ff29f1e0d40b523b0a55 CentOS-5.5-x86_64-bin-4of8.iso f1179ec875c0b4792e56f660493e82f0aff5e0f3 CentOS-5.5-x86_64-bin-5of8.iso 009892c8de408dc091e5a96b4a4ab213f2d5fe17 CentOS-5.5-x86_64-bin-6of8.iso 9660e63bd06a68ce94fe98defae1a0806ab834ae CentOS-5.5-x86_64-bin-7of8.iso 80c74ca2622b9aee3621a13a0cf6dbdc7743b4ee CentOS-5.5-x86_64-bin-8of8.iso a85d7cd41f49f2146177dae52163d5dca276efc2 CentOS-5.5-x86_64-bin-DVD-1of2.iso bb9a2c140170f10ed854541004539890ef7c68c8 CentOS-5.5-x86_64-bin-DVD-2of2.iso 3a04aa81ef75f329bf245a8c4f02af8137a84fb8 CentOS-5.5-x86_64-LiveCD.iso 231af7ca726557634a1f4d4f57436aab5a75f3b4 CentOS-5.5-x86_64-netinstall.iso +++++++++++++++++++++++ Pending Updates: Since upstream released their 5.5 media, a series of updates have been issued. These updates are currently syncing to the CentOS mirrors. +++++++++++++++++++++++ Sources and Debuginfo packages: srpms and debuginfo packages are still making their way to the CentOS mirrors and should be online within the next few days. Most sources are already in place, while the debuginfos are only stating to get uploaded now. +++++++++++++++++++++++ Getting Help: The best place to start when looking for help with CentOS is at the wiki ( http://wiki.centos.org/GettingHelp ) which lists various options and communities who might be able to help. If you think there is a bug in the system, do report it at http://bugs.centos.org/ - but keep in mind that the bugs system is *not* a support mechanism. Some Friendly URLs : http://www.centos.org/ http://wiki.centos.org/ http://lists.centos.org/ http://bugs.centos.org/ irc://#centos@irc.freenode.net +++++++++++++++++++++++ A big thanks to everyone who contributed towards this release, including the translation teams, the qa team, the artwork team, the CentOS Developers and all the users out there. A special thanks to my fellow CentOS Infrastructure team members: Ralph Angenendt and Tru Huynh, who have both put in many extra-long days. And a shout out to all the donors who have contributed machines, bandwidth and infrastructure towards the CentOS Project. Enjoy this release, tell all your friends about it too! -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 63, Issue 2 **********************************************

5 5

Re: [CentOS] OO and Firefox
by James Hogarth 16 May '10

16 May '10

To my knowledge they don't build that version. The ff I use on systems that need ff 3.6 is the one from mark Harris's repo. http://www.mharris.ca/mharris-yumrepo.html James On May 16, 2010 9:56 PM, "Frank Cox" <theatre(a)sasktel.net> wrote: On Sun, 2010-05-16 at 12:07 -0700, MHR wrote: > > I would recommend updating to FF 3.6 directly from Mozilla. Of > course, I also recommend using OOo 3.2, directly from openoffice.org. I use OO 3.2 from openoffice.org but I have never been able to find an x86_64 version of Firefox on the Mozilla website. -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Not firewall, but what?
by Jussi Hirvi 16 May '10

16 May '10

I have a strange problem, where some clients see the website on my server and some do not. It is not about the iptables, and seems to be not about tcp wrapper. Still it is something within the box. More details: - the problem is only with some clients, with no geographical connection between them; other clients see the website just fine - the problem-clients get timeout with their browser - they get timeout also when they try a numerical ip address - but they see another machine in the same subnet just fine (when they browse by ip number), so the problem has to be inside this webserver box, right? - port 80 (not ssl) Switching off iptables does not help. The files hosts.allow and hosts.deny are empty, so I guess it's not the tcp wrapper. I am out of things to test. Any ideas? - Jussi Hirvi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

20 54

Problem with gs
by Kwan Lowe 16 May '10

16 May '10

Just updated a laptop.. everything went smoothly but noticed one issue. After updating and rebooting, I did a print test using enscript to print a test file. In a few seconds, the CPU utilization shot way up. The ghostprint gs program was using 99% CPU. The laptop fans started spinning at the high rate. Laptop got very hot very suddenly then shutdown. On reboot, the BIOS reported a temperature error and that the system was shutdown to prevent damage. On rebooting, the gs program kicked off again and again CPU shot up very high. Fans started kicking off. I killed the gs process and about 20 seconds later then fans went back to normal.

1 0

Re: [CentOS] [CentOS-announce] Release for CentOS-5.5 i386 and x86_64
by Gilbert Sebenste 15 May '10

15 May '10

Yay! Just did it on my 32-bit and x-64 boxes. Got in without a hitch. Nice work, CentOS team! Keep it up! Now, what about the post-release updates. Any idea when those are coming? ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** Staff Meteorologist, Northern Illinois University **** E-mail: sebenste(a)weather.admin.niu.edu *** web: http://weather.admin.niu.edu ** *******************************************************************************

4 5

sendmail many emails
by Jerry Geis 15 May '10

15 May '10

I was getting MANY emails from XXX.hinet.net - kind of filled my mqueue directory. I stopped sendmail. removed all the files in mqueue, added to sendmail access a REJECT for hinet.net This certainly seems to help - but is that the correct way to take care of this sort of thing? Thanks, Jerry

4 4

ethernet outages C5.4
by Dave Stevens 14 May '10

14 May '10

Hello All, I don't have any reason to believe CENTOS (5.4) is underlying my difficulties but it's what I've got to work with so here's the setup: I have a 2P motherboard with 2 Opteron 2376s and two ethernet ports. The setup is fully virtualized, with Dom0, dom4 and Dom1 up and running. dom4 is attached to a dhcp service on eth0 and has no problems. I've recently connected dom1 to eth1. eth1 is connected to a dsl modem (no router) and to the ISP's dsl signal It has a static IP address, 204.174.35.205. At intervals of a few hours the dom1 service on eth1 became inaccessible, not responding for either web or ssh access. eth0 on another provider's network remains up at this time. I can fix the availability issue by ssh'ing to the eth0 side, then ssh from there to dom1 (at 192.168.0.117) and then from the inside out ping any external address, it doesn't seem to matter which one. Then the connections get through and all is well for a while. I have a workaround in place with this command: watch -n 60 ping -c 1 uniserve.com That's been running for two days and access from outside has been uninterrupted. I don't know where to start on this one. It could be a funny router setup at the ISp's end or maybe the port (previously disused) on this board is really flaky (but then why does pinging help?). The board, fyi is a Tyan Thunder 3600m, S2932. Ideas? Dave -- "It is no measure of health to be well adjusted to a profoundly sick society." Krishnamurti

3 3

update of rpm directory
by Adrian Sevcenco 14 May '10

14 May '10

Hi! I have an directory full with rpms that are installed on some machines.. what is the best way to update those rpms to the latest version? are there more optimal approaches then searching for each rpm names in an update repo and download one by one? Thanks, Adrian

7 7

automount complaints
by m.roth＠5-cent.us 13 May '10

13 May '10

Folks, I've been getting complaints in our logfiles, such as May 12 10:07:07 <servername> automount[3415]: update_negative_cache: key ".git" not found in map. a) Is there a FAQ on automount that might cover some of this? Googling hasn't found one for me? b) Any clues as to what might be causing this? I see a lot of it, in spurts. mark

2 1

yum screwup
by rray_1＠comcast.net 13 May '10

13 May '10

I have several machine running CentOS I upgraded all of them from 5.3 to 5.4 One machine has a yum problem after upgrading # yum update Loaded plugins: fastestmirror Determining fastest mirrors * addons: mirror.trouble-free.net * base: mirror.team-cymru.org * extras: mirror.team-cymru.org * updates: mirror.raystedman.net addons | 951 B 00:00 addons/primary | 201 B 00:00 Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 309, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 178, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 345, in doCommands self._getTs(needTsRemove) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 101, in _getTs self._getTsInfo(remove_only) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 112, in _getTsInfo pkgSack = self.pkgSack File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 661, in <lambda> pkgSack = property(fget=lambda self: self._getSacks(), File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 501, in _getSacks self.repos.populateSack(which=repos) File "/usr/lib/python2.4/site-packages/yum/repos.py", line 260, in populateSack sack.populate(repo, mdtype, callback, cacheonly) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 190, in populate dobj = repo_cache_function(xml, csum) File "/usr/lib/python2.4/site-packages/sqlitecachec.py", line 42, in getPrimary self.repoid)) TypeError: Parsing primary.xml error: Start tag expected, '<' not found I have tried 'yum clean all', 'yum --noplugins', 'rm -r /var/cache/yum/*', deleting all yum packages and reinstalling, and nothing helps If I copy /var/cache/yum/* from a working machine all is well I have used md5sum to check the downloaded files and they match the files on a working machine If I disable the addons repo the other repos load ok Also rpmforge repo breaks yum What else might I try Thanks Richard

2 3

Simplifying making a USB install key
by m.roth＠5-cent.us 13 May '10

13 May '10

Ok, where/how do I submit this to the CentOS project? Here's a complete script - anyone, *please* feel free to test it, and let me know if I've missed anything. Thanks in advance. mark #!/bin/bash # ################################### # Author: mark roth # Date: 30 Apr. 2010 # Purpose: to create a working, bootable CentOS install on a USB key ##################################### if [[ $# < 2 ]]; then echo "usage: $0 <devname> <path/to/install.iso>" echo " Example: $0 sdb /scratch/CentOS-5.4-bin-DVD.iso" echo " Note: you must install livecd-tools before running this." exit fi /sbin/sfdisk -n -uM /dev/$1 << EOF ,10,b,* ,,83 ; ; EOF mkfs -t vfat /dev/${1}1 mkfs /dev/${1}2 /usr/bin/livecd-iso-to-disk /scratch/CentOS-5.4-i386-LiveCD.iso /dev/${1}1 mount /dev/${1}2 /mnt cp $2 /mnt/ # end

5 7

Re: [CentOS] Text file manipulation in CentOS?
by sheraznaz＠yahoo.com 13 May '10

13 May '10

>>To be more specific, I need to find how many distinct records are there in say column#1? awk '{print $1}' filename | sort -u | wc -l This will show how many unique entries are present in column one (use awk -F to change delimiter e.g awk -F ":" for : delimiter) >> How can I filter out the distinct records with number of occurances less than a pre-determined threshold? I don't quite understand this part. awk '{print $1}' filename | sort | uniq -c | sort -rn Will give you a number of occurrences (reverse numerically sorted) of uniq data from column one. Now I think you want to put that through a loop and only show those that are less than threshold? Thanks Sheraz ------Original Message------ From: sheraznaz(a)yahoo.com Sender: centos-bounces(a)centos.org To: CentOS mailing list ReplyTo: CentOS mailing list Subject: Re: [CentOS] Text file manipulation in CentOS? Sent: May 11, 2010 1:14 AM Can you sample input and expected result. Sent from my Verizon Wireless BlackBerry -----Original Message----- From: hadi motamedi <motamedi24(a)gmail.com> Date: Tue, 11 May 2010 09:09:23 To: CentOS mailing list<centos(a)centos.org> Subject: [CentOS] Text file manipulation in CentOS? _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Sent from my Verizon Wireless BlackBerry

8 20

your session only lasted less than 10 seconds error
by Chaitanya Yanamadala 12 May '10

12 May '10

hai i have run the halt command from the xshell and the machine got restarted, now when i restart the machine, i am getting this error . I have tried to press the CTRL+ALT+F2 and tried to login with the root user but that one is also not working. can any one help me with this.. this the error message i am getting after i tried to login " your session only lasted less than 10 seconds ...try logging in with one of the failsafe sessions to see if you can fix the problem" and it published details (.xsession-errors file) /etc/gdm/PreSession/Default: Registering your session with utmp /etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -u /var/run/utmp -x "/var/gdm/ :0.Xservers" -h " " -l ":0" "chaitu" session_child_run: Could not exec /etc/X11/xinit/Xsession default Regards Chaitanya

8 18

.vimrc File Disappeared and Saw vimrc and .viminfo Files in My Home Directory
by Wang, Mary Y 12 May '10

12 May '10

Hi, I'm not sure what's going on ;-( updated a .vimrc file in my home directory with some customized settings last week. I'm looking at my home directory now, that .vimrc file disappeared for no reason and I saw a file called vimrc and .viminfo in the home directory. Of course, it didn't take my customized settings when I used vim. Is that a normal behavior? Am I missing something here? Thanks Mary

2 2

Control what messages go into /var/spool/mail/root
by Yungwei Chen 12 May '10

12 May '10

Hi, I found some info messages below in /var/spool/mail/root. To reduce the size of that file, I'm wondering if there's a way to prevent those unimportant messages from entering /var/spool/mail/root. Thanks. 2010-05-10T10:32:27-05:00 <authpriv.info> se1 su: pam_unix(su-l:session): session closed for user root 2010-05-10T10:01:28-05:00 <local1.info> se1 Keepalived_vrrp: VRRP_Instance(VI_1) Received lower prio advert, forcing new election 2010-05-10T10:02:02-05:00 <syslog.info> se1 syslog-ng[12531]: Log statistics; dropped='tcp(......)=0', processed=.....

2 1

ldconfig: /usr/lib64/libfreebl3.so is not a symbolic link
by a arias 12 May '10

12 May '10

I have been getting the following error when trying to run ldconfig: ldconfig: /usr/lib64/libfreebl3.so is not a symbolic link # ll /usr/lib64/libfreebl3.so -rwxr-xr-x 1 root root 312336 Mar 28 11:13 /usr/lib64/libfreebl3.so I've used "yum whatprovides /usr/lib64/libfreeb13.so" to determine that this file belongs to nss. I have tried to reinstall nss but that does not fix the problem. Any ideas? How can I fix this?

3 5

REMOVE NAME FROM YOUR EMAIL LIST
by Bob Taylor 12 May '10

12 May '10

BOB TAYLOR HAS DIED PLEASE REMOVE HIS NAME FROM YOUR E MAIL LIST THANKS

6 5

Configuring proftpd
by Chaitanya Yanamadala 12 May '10

12 May '10

Hai can anyone help me configuring the proftpd for a new user. i have already googled for this one and have found a lot of documents and tried almost all, but none looks to be working. so if anyone have a known way help me out. Chaitanya

2 2

Rsync Directories
by James Bensley 12 May '10

12 May '10

Hey List, I am setting up an rsync daemon (not something I normally do, I normally use rsync over ssh but I'm trying to set up an rsync server and have clients sync their local directories with what is on the server) and I am wondering about the directory entries within the rsyncd.conf. You can add entries in the rsyncd.conf file for directories such as; [Example] comment = "My example directory" path /to/example/dir When using rsync on the client side, how do I specify to only sync the directories in my rsync daemon config file. As I said, I normally use rsync over ssh and just rsync <options> /local/dir user@host:/remote/dir how can I say "rsync <options> user@host /local/folderlist" and have it sync all the folders configured in the server's rsync.conf to a folder on a client called /local/folderlist? -- Regards, James. http://www.jamesbensley.co.cc/

1 1

Local repo sqlite files?
by lhecking＠users.sourceforge.net 12 May '10

12 May '10

Hi all, I'm updating a customised CentOS 5.2 repo to 5.4. After running createrepo, I find all the usual .xml.gz files updated, but the sqlite.bz2 files have not been touched. What is the significance of these files? If they need to be updated, how is it done? -r--r--r-- 1 user group 1811 Oct 1 2009 TRANS.TBL -rw-r--r-- 1 user group 1050329 May 12 11:04 comps.xml -rw-r--r-- 1 user group 4116331 Oct 1 2009 filelists.sqlite.bz2 -rw-r--r-- 1 user group 5298535 May 12 11:04 filelists.xml.gz -rw-r--r-- 1 user group 10443591 Oct 1 2009 other.sqlite.bz2 -rw-r--r-- 1 user group 18438410 May 12 11:04 other.xml.gz -rw-r--r-- 1 user group 2141520 Oct 1 2009 primary.sqlite.bz2 -rw-r--r-- 1 user group 1737825 May 12 11:04 primary.xml.gz -rw-r--r-- 1 user group 1140 May 12 11:04 repomd.xml The customisation essentially consists of merging base and updates into a single repository. --------------------------------------------------------------- This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. ---------------------------------------------------------------

2 2

Adding Repositories and using yum to download packages
by Jatin Davey 12 May '10

12 May '10

Hi I am using CentOS 5.3 and after installing the OS i scrolled to the /etc/yum.repos.d directory and i could not find any repositories being present there. So i googled a bit on adding the repositories and found the link: http://www.osresources.com/index.php?action=artikel&cat=11&id=6&artlang=en then when i try to install the net-snmp package that i require to monitor my box i get the following error: [root@sc-devld-1 etc]# yum install net-snmp Loading "rhnplugin" plugin Loading "installonlyn" plugin Repository base is listed more than once in the configuration Repository contrib is listed more than once in the configuration Repository centosplus is listed more than once in the configuration Repository addons is listed more than once in the configuration Repository extras is listed more than once in the configuration This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Setting up repositories not using ftp, http[s], or file for repos, skipping - 5Client is not a valid release or hasnt been released yet Error: Cannot find a valid baseurl for repo: update Please let me know what needs to be done. Thanks Jatin

4 10

setup firewall with 3 nic cards
by Jerry Geis 12 May '10

12 May '10

I am trying to setup some rules on a box with 3 nic cards. Two internet connections and one office connection. eth0 is office eth1 is internet T1 eth2 is internet Cable when I do "iptables -F" then iptables -L everything is gone as it should be. Then I do iptables -t nat -A PREROUTING -p tcp -d $MYIP --dport 6550 -j DNAT --to $INTERNAL_ADDRESS:6550 iptables -t nat -A POSTROUTING -d $INTERNAL_ADDRESS -j SNAT --to $GWIP then I do iptables -L again and the rule is not there. Am I missing something? I have tried -I and -A both. Thanks, Jerry

5 9

Re: [CentOS] [CentOS-announce] CESA-2010:0394 Important CentOS 4 x86_64 kernel security, bug fix, and enhancement update
by Bob Taylor 12 May '10

12 May '10

BOB TAYLOR HAS DIED PLEASE TAKE HIS NAME OFF YOUR MAIL OUT LIST THANKS ... On Fri, May 7, 2010 at 3:12 PM, Tru Huynh <tru(a)centos.org> wrote: > entOS Errata and Security Advisory CESA-2010:0394 > > kernel security, bug fix, and enhancement update security update for CentOS > 4 x86_64: > https://rhn.redhat.com/errata/RHSA-2010-0394.html > > The following updated file has been uploaded and is currently syncing to > the mirrors: > > x86_64: > updates/x86_64/RPMS/kernel-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-devel-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-doc-2.6.9-89.0.25.EL.noarch.rpm > updates/x86_64/RPMS/kernel-largesmp-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-largesmp-devel-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-smp-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-smp-devel-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-xenU-2.6.9-89.0.25.EL.x86_64.rpm > updates/x86_64/RPMS/kernel-xenU-devel-2.6.9-89.0.25.EL.x86_64.rpm > > source: > updates/SRPMS/kernel-2.6.9-89.0.25.EL.src.rpm > > You may update your CentOS-4 x86_64 installations by running the command: > > yum update kernel\* > > Tru > -- > Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) > http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B > > _______________________________________________ > CentOS-announce mailing list > CentOS-announce(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-announce > >

2 1

Re: [CentOS] [CentOS-announce] CESA-2010:0112 Critical CentOS 5 i386 firefox Update
by Bob Taylor 12 May '10

12 May '10

BOB TAYLOR HAS DIED PLEASE TAKE HIS NAME OFF YOUR MAIL OUT LIST THANKS ... On Mon, Feb 22, 2010 at 5:17 PM, Karanbir Singh <kbsingh(a)centos.org> wrote: > > CentOS Errata and Security Advisory 2010:0112 Critical > > Upstream details at : https://rhn.redhat.com/errata/RHSA-2010-0112.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: ( md5sum Filename ) > > i386: > af85d2bab4fd84678522fa921ad7c65d firefox-3.0.18-1.el5.centos.i386.rpm > 17a22cb02ee8ac264f6f5f169266443f xulrunner-1.9.0.18-1.el5_4.i386.rpm > 5fc996913fdba522974579cd9ee499a0 xulrunner-devel-1.9.0.18-1.el5_4.i386.rpm > 35c5944fa6938f15ea52081b31171c6b > xulrunner-devel-unstable-1.9.0.18-1.el5_4.i386.rpm > > Source: > 3cbf15ad8683b5788a970e834419a99b firefox-3.0.18-1.el5.centos.src.rpm > 626aa5b68835c685a3e899732d5a7970 xulrunner-1.9.0.18-1.el5_4.src.rpm > > > -- > Karanbir Singh > CentOS Project { http://www.centos.org/ } > irc: z00dax, #centos(a)irc.freenode.net > > _______________________________________________ > CentOS-announce mailing list > CentOS-announce(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-announce >

1 0

Openbravo on CentOS
by Joseph L. Casale 12 May '10

12 May '10

Anyone here supporting Openbravo in CentOS, opinions or comments wrt how it runs or nuances from the os side would be appreciated! Thanks, jlc

2 1

disable autofs timeout
by aurfalien＠gmail.com 11 May '10

11 May '10

Hi, Does setting the autofs timeout=0 create a permanent mount? What I'm trying to do is get the best of both world; 1) Have a persistent mount so that users can use autocompletion. 2) utilize the benefits of autofs so that when an NFS resource becomes unavailable, the system doesn't hang. I've tried a timeout of 0 but it doesn't seem to work.

6 9

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss