- Discuss - lists.centos.org

Getting Domainkeys, dkim, and SMTP-AUTH/TLS to play nicely together in sendmail
by Don Levey 14 Apr '10

14 Apr '10

A while back I struggled to get Domainkeys and DKIM to work properly on my little home server. While I'm sure they weren't necessary in a strict sense, it not only enabled me to learn about the technology but allowed for more of a verification of the email coming from my server. And so this week I figured: "Hey, this has been working without a problem for a while; it must be time to screw with something else." Hence my effort to enable SMTP submissions over port 587. At the very least, with some ISPs blocking traffic to port 25, this seemed to be a good idea (as well as providing a better method for sending email using my server from outside my home LAN). I've read a number of write-ups of SMTP AUTH, including the information at sendmail.org. I've run into a snag, however, with the .pem certificate that is used for the DK stuff. The conventional wisdom seems to be to run domainkeys/dkim as a user other than root, and a .pem certificate is required. Therefore, to get this to run properly, the permissions on the certificate need to me 600 or 400, owned by this user. All well and good so far, except that STARTTLS doesn't like this: STARTTLS=server: file /var/db/domainkeys/mail.key.pem unsafe: permission denied When I telnet to the server, port 587, and issue an EHLO, I see neither AUTH nor TLS in the response. The sendmail.mc file contains the line: define(`localCERT',`/ver/db/domainkeys/mail.key.pem')dnl So if there's a different line I can add to indicate to TLS/AUTH that it should use a different cert (or, rather, the same one copied to a different location with different permissions...) I don't know it. Anyone ever run into this before? -Don Levey

1 0

DRBD,GFS2 and GNBD without all clustered cman stuff
by Raffaele Camarda 14 Apr '10

14 Apr '10

Hi all, Where i want to arrive: 1) having two storage server replicating partition with DRBD 2) exporting via GNBD from the primary server the drbd with GFS2 3) inporting the GNBD on some nodes and mount it with GFS2 Assuming no logical error are done in the last points logic this is the situation: Server 1: LogVol09, DRDB configured as /dev/drbd0 replicated to Server 2. DRBD seems to work perfect as cat /proc/drbd Server 2: LogVol09, Secondary for /dev/drbd, cat /proc/drbd is ok What i thought to do was to export via GNBD the /dev/drbd0 to import it on a couple of nodes. Using GFS2 as FS for concurrent usage. I got to format the GFS2 FS on the Server 1 drbd0 device. But was unable to mount it because gfs_controld wasn't accepting connections, i discovered that cman manage gfs_controld. In any case i started it manually and discover that it try to use ccsd daemon which i have not installed. Ok, i do not need to mount it locally so i started configuring GNBD, started manualli the server end stated the export command...again the cman/ccsd problem: gnbd_clusterd: ERROR cannot join cman Now, what i'm asking: am i forced to use all the cluster stuff cman, ccsd...fence...with this configuration? I would like only to use the tools i need: DRDB, GNBD and GFS2 without cluster facilities. Thanks Raffaele

2 2

timeout problem
by tony.chamberlain＠lemko.com 14 Apr '10

14 Apr '10

I found the response below today online to a question I had. For some reason I never got the mail. I am not quite clear on what "DHCP + DFG + 2DNS entries" means when calculating the IP to set for the router: Thanks Re: [CentOS] Yum/WGET/HTTP sourceforge etc. new April 12, 2010 08:10AM On Sun, 2010-04-11 at 22:57 +0000, tony.chamberlain(a)lemko.com wrote: > Here is what I tried. When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. > Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast > IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 > going through the router through Comcast is when I had the problem. > --- Try this: For the NIC on your Comcast router set its ip to one that the dhcp in the router gives out + DFG + 2 DNS entries. In order to have it static. I see lots of routers with your problem. John

2 1

ClamAV "clamscan" command using huge amount of RAM
by Sean Carolan 14 Apr '10

14 Apr '10

We have a perl cgi script that accepts uploaded files and runs clamscan on them. While observing the system performance I noticed that each clamscan process consumes up to 250MB of RAM. Is this normal for ClamAV? This seems like an enormous amount of RAM, for simply scanning one file for viruses.

4 4

SVN server update
by Roland RoLaNd 14 Apr '10

14 Apr '10

Dear all, i have SVN server 1.4.x working on production. i want to go ahead and update to 1.6.x i'm hoping your experience would help me prevent possible downtime.. is there any issues that may arise from updating the SVN server from one version to another on a production server? _________________________________________________________________ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969

4 3

warning: only V3 signatures can be verified, skipping V4 signature
by Tommy Zong 14 Apr '10

14 Apr '10

Hello, Anytime when I issue rpm command, there will be a warning massage "warning: only V3 signatures can be verified, skipping V4 signature". For example, [root@hadoop-datanode44 ~]# rpm -qa | grep -i post postgresql-server-8.3.8-1PGDG.rhel4 warning: only V3 signatures can be verified, skipping V4 signature postgresql-8.3.8-1PGDG.rhel4 postgresql-pgpool-II-2.3.1-1 postgresql-libs-8.3.8-1PGDG.rhel4 postgresql-devel-8.3.8-1PGDG.rhel4 What does this message mean? Thanks.

1 0

Re: [CentOS] Slightly OT: which hardware for CentOS file server (Samba, 2 To storage, 50 users)?
by Les Bell 14 Apr '10

14 Apr '10

Niki Kovacs <contact(a)kikinovak.net> wrote: >> And so on. In the end, I decided not to bother and just left. << I think most consultants have one* of those in their pasts. The trick is to cut your losses, as soon as possible. You had a narrow escape there. Best, --- Les Bell [http://www.lesbell.com.au] Tel: +61 2 9451 1144 * Two, just possibly. Three, and you're a slow learner who has no business being a consultant.

1 0

Disappearing DNS entry
by Hugh E Cruickshank 14 Apr '10

14 Apr '10

CentOS 4.8, BIND 9.2.4, DHCP 3.0.1 Hi All: I have a rather perplexing problem where the DNS entry in BIND for one of my network printers sporadically "disappears" from our zone file (but not the reverse zone file). We have four Lexmark printers connected locally over our internal LAN using static IP addresses. We have 3 T640n printers and a T642n printer and it is only the T642n printer that this is happening to. I thought I had it licked when I discovered that both DDNS and mDNS were enabled on this printer but not the others, however disabling those has had no effect. We do use DHCP for the bulk of our Windows workstations and DHCP is configured to update the DNS server and this appears to work fine (once I disabled all the "Register this connection's address in DNS" options on the workstations). I have found one suspicious entry in /var/log/messages: Apr 12 17:34:14 fisds0 named[5210]: client 192.168.2.7#10242: updating zone 'forsoft.com/IN': deleting an RR This would seem to indicate that the printer itself has issued the request to the DNS server but for the life of me I cannot see what might be doing it. Has anyone encountered something similar and can point me in the right direction? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

2 3

XFS-filesystem corrupted by defragmentation Was: Performance problems with XFS on Centos 5.4
by Bernhard Gschaider 13 Apr '10

13 Apr '10

Before I'd try to defragment my whole filesystem (see attached mail for whole story) I figured "Let's try it on some file". So I did > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 101 extents and 1 hole] Then I defragmented the file > xfs_fsr /raid/Temp/someDiskimage.iso extents before:101 after:3 DONE > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 3 extents and 1 hole] and now comes the bummer: i wanted to check the fragmentation of the whole filesystem (just for checking): > xfs_db -r /dev/mapper/VolGroup00-LogVol04 xfs_db: unexpected XFS SB magic number 0x00000000 xfs_db: read failed: Invalid argument xfs_db: data size check failed cache_node_purge: refcount was 1, not zero (node=0x2a25c20) xfs_db: cannot read root inode (22) THAT output was definitly not there when I did this the last time and therefor the new fragmentation does not make me happy either xfs_db> frag actual 0, ideal 0, fragmentation factor 0.00% The file-system is still mounted and working and I don't dare to do anything about it (am in a mild state of panic) because I think it might not come back if I do. Any suggestions most welcome (am googling myself before I do anything about it). I swear to god: I did not do anything else with the xfs_*-commands than the stuff mentioned above Bernhard

3 4

centos 5.3x64 iso
by aurfalien＠gmail.com 13 Apr '10

13 Apr '10

Hi all, My 5.3 DVD is ruined and the 5.4 installer won't run on my box w/o errors (uts not the disk, something to do with the installer itself). I usually just install 5.3 and then yum it to 5.4. Does any one know were I can find a 5.3x64 iso file? - aurf

2 2

Re: [CentOS] 12-15 TB RAID storage recommendations
by Seth Bardash 13 Apr '10

13 Apr '10

Just finished building a new server for inhouse use. 12.8TB Needed a nfs and samba server which could store 10TB and be reliable. Also wanted to replace out DHCP server and our internal DNS server. So needed to run dnsmasq plus ntp for time serving. This machine replace 3 older units. We used a Supermicro 3U case with 15 sata shuttles and 2N+1 760 Watt PS. On ebay for 300.00 Used a Supermicro H8DME-2 MB cause I had one sitting around. If I was going to buy one it would have been a Tyan S2932G2NR-SI for reliability (we have sold a bunch of these and they always work) Installed dual AMD 2382's and 16 GB DDR2-800 RECC plus 4 wire HSF's. Went to the 3ware online store and purchased a 9550SXU-16ML with the breakout cables for 340.00 Yes, I know its PCI-X. It was inexpensive and it runs almost as fast as the 9650 series at twice the price. Installed 15 pcs of the WD1001FALS disks. Very reliable and low cost even though they are desktop drives. Used these since we always have 3 on the shelf as spares and WD turns a bad one around in about 5 days. We have installed over 200 of these drives in raid arrays and have had 2 fail in the last 6 months. BTW, Initializing took <8 hours not days. Set it up as a Raid 5 array with one hot spare and autorebuild. Have tested it with both Centos 5.4 x86_64 and OpenSUSE 11.1 x86_64. Also installed an LSI SCSI card and a Sony AIT-5 Tape drive with Bacula for data backup and recovery. Again, all worked fine and the machine was able to do backups and keep a GigE connection saturated. Using an in house piece of code called disktest we are seeing 268 MB / sec on writes and 347 MB / sec on reads using 32 GB test files, 131K buffer sizes and single threading. If you would like to see a system that is almost identical, have a look at Coraid.com. They use a dual xeon and a BSD custom kernel. Hope this config helps...... Seth Bardash Integrated Solutions and Systems LLC seth(a)integratedsolutions.org Failure cannot survive knowledge and perseverance!

3 3

12-15 TB RAID storage recommendations
by Boris Epstein 13 Apr '10

13 Apr '10

Hello listmates, I would like to build a 12-15 TB RAID 5 data server to run under ContOS. Any recommendations as far as hardware, configuration, etc? Thanks. Boris.

12 20

Next Newsletter release
by Geerd-Dietger Hoffmann 13 Apr '10

13 Apr '10

Hey Due to that the last release was a last minute thing again I want to announce that no more information will be added to the Newsletter after the 25th. of April. So could everyone who wants to contribute please send me the stuff till then. This then should give us a week to proof read everything and give the translators a head start :) *I still need a user desktop photo* Cheers Didi -- Hoffmann Geerd-Dietger http://contact.ribalba.de

3 5

Cluster Suite Question
by Joseph L. Casale 13 Apr '10

13 Apr '10

A while back I posted a question in the Linux-Cluster list and never got a reply. I am hoping maybe someone here has any insight? I have a service that I have changed the default from restart to relocate. Now I need to add one more script resource to it, but this script resource is not essential, and if it tanks, a restart will certainly be sufficient so I assume I have to create another service so I can tune the Restart Policy Extensions for it, whereas the Recovery Policy for the original remains as Relocate. I have looked all through the wiki and net, but I can't see how to group or tie services together so they always follow each other around? These two services can't be on distinct nodes, anyone have any ideas? Thanks, jlc

1 0

CentOS-3, is this what I need?
by Prashant Saxena 13 Apr '10

13 Apr '10

Hi, I am new to linux and so far I have only used ubuntu. I have developed a python application which I would like package and distribute. The problem with packaging tools such as pyinstaller and cx_freeze is that you have to compile the bootloader first. Now If I compile the loader on karmic 9.10, the binary would suffer from compatibility issue. In other words I won't be able to execute the app on a lower version such as ubuntu 8.04.4 LTS. The solution is to use as much as old libc as you can to compile the bootloader. It seems CentOS-3 is based on glibc 2.3, which is pretty old and if I compile and do other stuff of on CentOS-3, it'll do the job and hopefully covers almost all the end user base that I am expecting will use the app. It may possible that I might face some issues with my requirements mentioned below but I have no practical idea about them. As I mentioned before that I am new to linux and I always prefer to use VirtualBox, when ever I try any new distribution. In short these are my requirements and I would like to know whether CentOS-3 is the right choice for me or not? 1. Use VirtualBox. XP Host & CentOS-3 guest. 2. python 2.6.4 3. wxPython 2.8.10.1 from wxWidgets repository 4. libcairo 1.8.8 5. pycairo 1.8.6 6. couple of other python modules. Are these packages available or if not can be downloaded from other repositories? I am also concerned about my requirements that whether they themselves will suffer from binary dependency issue or not because I of using CentOS-3. Some one also suggested that you should also compile your requirements(python, wxpython etc.) along with the bootloader and this would make your package and underlying libraries backward compatible and lesser chance of any failure. Best regards Prashant Your Mail works best with the New Yahoo Optimized IE8. Get it NOW! http://downloads.yahoo.com/in/internetexplorer/

3 2

PXE Boot : Clonezilla
by premrajm＠digilink.in 13 Apr '10

13 Apr '10

Hi, I wanted to set up Clonezilla Tools on my client machine via PXE Boot. How do I do it. I got information from the web, but after making changes in the dhcpd.conf file, the dhcpd fails to start. In the BIOS after enabling the PXE Boot, iam not able to see an Clonezilla menu options that i have placed in /pxelinux.cfg file. Iam using centos-5.3 on Intel Board Please provide me with some more information on the same. Regards, Premraj Disclaimer : This message is proprietary to Smartlink Network Systems Ltd. and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. The company accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus. ______________________________________________________________________________ This email has been scrubbed for your protection by SecureMX. For more information visit http://securemx.in ______________________________________________________________________________

3 2

Amazon S3FS Automounter of sorts
by Matt Keating 13 Apr '10

13 Apr '10

Hi, I¹ve just started using Amazon S3 for storage and have used s3fs to mount the buckets on the file system. 1. I was wondering if anyone has a better method even though this meets my current needs. 2. if there is an automounter that could be tweaked to work with s3fs. The entries in my fstab are rather different to the normal disk based ones, s3fs#BUCKETNAME /mnt/s3/BUCKETNAME fuse allow_other,default_acl=public-read,noauto 0 0 ,so I wasn¹t sure if it is possible. My reasoning to want an automounter is I¹m not sure on the amount of extra calls made to the S3, so would prefer it not be connected if its not needed. Thanks, Matt NOTE: The information in this email is confidential and may be legally privileged, unless stated to the contrary. If you are not the intended recipient, you must not read, use or disseminate that information. Any opinions or comments are personal to the writer and do not represent the official view of Dennis Publishing Ltd. If you have received this email and are not a named addressee, please contact itdirector(a)dennis.co.uk immediately by reply email and then delete this message from your system. Please do not copy it or use it for any purpose, or disclose its contents to any other person. Although this email and any attachments are believed to be free of any virus, or other defects, it is the responsibility of the recipient to ensure that they are virus free and no responsibility is accepted by Dennis Publishing Ltd for any loss or damage arising from the receipt or use thereof. Company registered in England No. 1138891 Registered office: 30, Cleveland Street, London, W1T 4JD

3 4

ACER T230H touchscreen problem!
by Vladimir Zdraveski 13 Apr '10

13 Apr '10

Hi, I am completely new to CentOS(a week), but work on linux almost 2 years. This touchscreen ACER T230H is probably produced for Windows7, but works also with Windows XP. On CentOS works just screen, but not touch. I have no idea how to make it work. Should I look for driver? Please give me some advice!?! Thanks, Vladimir -- Vladimir Zdraveski Student Informatics and Computer Engineering Faculty of Electrical Engineering and Information Technology Skopje, R.Macedonia web: http://zdr.vlad.tripod.com/

1 0

PXE Boot : Clonezilla
by premrajm＠digilink.in 13 Apr '10

13 Apr '10

Hi, I wanted to set up Clonezilla Tools on my client machine via PXE Boot. How do I do it. I got information from the web, but after making changes in the dhcpd.conf file, the dhcpd fails to start. In the BIOS after enabling the PXE Boot, iam not able to see an Clonezilla menu options that i have placed in /pxelinux.cfg file. Iam using centos-5.3 on Intel Board Please provide me with some more information on the same. Disclaimer : This message is proprietary to Smartlink Network Systems Ltd. and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. The company accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus. ______________________________________________________________________________ This email has been scrubbed for your protection by SecureMX. For more information visit http://securemx.in ______________________________________________________________________________

1 0

rsyslog 4.x or 5.x version for Centos 5.4
by For＠ll 13 Apr '10

13 Apr '10

Hi, I was looking for centos 5.4 package rsyslog version 5.x or 4.x as rpm. Any repo exist with this package? For@ll

2 3

how to debug pxe boot problems
by Rudi Ahlers 13 Apr '10

13 Apr '10

Hi all, I'm trying to get a pxeboot server up and running, according to the instructions on the WIKI (http://wiki.centos.org/HowTos/PXE/PXE_Setup & http://wiki.centos.org/HowTos/PXE/PXE_Setup/Menus) Here's my /tftpboot/pxepxelinux.cfg/default : default menu.c32 prompt 1 timeout 300 ONTIMEOUT local MENU TITLE PXE Menu label Dos Bootdisk MENU LABEL ^Dos bootdisk kernel memdisk append initrd=images/622c.img LABEL CentOS 5 x86_64 MENU LABEL ^CentOS 5 x86_64 kernel images/centos/5/x86_64/vmlinuz append initrd=images/centos/5/x86_64/initrd.img ramdisk_size=100000 ksdevice=eth0 ip=dhcp url --url http://192.168.2.250/linux/centos/5/os/x86_64 label linux kernel vmlinuz append initrd=initrd.img ramdisk_size=9216 noapic acpi=of Then, here's the layout for the CentOS 5 image: [root@intranet /]# ll /tftpboot/images/centos/5/ total 0 lrwxrwxrwx 1 root root 35 Apr 13 07:20 x86_64 -> /home/www/linux/centos/5/os/x86_64/ As you can see, I linked the folder to a Linux image on the hard drive. Apache then advertises that folder on the LAN as follows: http://192.168.2.250/linux/centos/5/os/x86_64 and I can browse the folders via Firefox. Yet when I bootup a PC in PXE mode, it doesn't actually load the CentOS image. I can see the PXE Menu and choose between "Dos Bootdisk", "CentOS 5 x86_64" and "linux" (which I setup as a test). When I load "Dos Bootdisk", I get an error: Loading memdisk.... Could not find ramdisk image:images/622c.img boot : So, it's reading the configuration, but not loading the CentOS boot image. /var/log/messages doesn't give my any errors on this (yes I know how to read /var/log/messages) Does anyone know how to get pxeboot to output debug messages to syslog? OR,what am I doing wrong? The tutorials I got on the net are rather vague on this. And please don't tell me to use Cobbler, I already tried that but no one one this lists supports it. -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

4 7

Swap = 0
by cahit Eyigünlü 13 Apr '10

13 Apr '10

My server returning an error sth. like swap = 0 then locking httpd and all other services is this normal this is a virtual machine and i give it 3 gb ram and 4cpu of i7 920 i have 1 gbit connection on this machine finally i have 4000+ clients at one time :S

3 5

How to log separate files or directories for centralizing SysLog server ?
by James Corteciano 13 Apr '10

13 Apr '10

Hi All, I have three server. server0 is centralized logging server, server1 and server2 are remote client servers. How can I properly configure the syslog in server0 to log the two servers in different separated files/directories. Example, server1 will be logged at /var/log/syslog/server1.log of server0 and /var/log/syslog/server2.log for server2 as well. Is there need of little tweaking for syslog.conf ? Thanks. James

2 4

Installing a .ko file?
by Slack-Moehrle 12 Apr '10

12 Apr '10

Hi All, I am trying to add a 3Ware 9500S-8 RAID controller to a CentOS 5.4 box. I have the drivers from 3Ware and they seem to be a .ko file (which I presume is like a .kext on OSX) How do I install these? Searched turn up people talking about Kernel panics with .ko's but I dont see anything that points to to installing one so I can use the card. Best, -Jason

6 7

How long will CENTOS 4.X automatic resync to to time server???
by mcclnx mcc 12 Apr '10

12 Apr '10

We have several CENTOS 4 and 5 servers. ALL CENTOS servers have NTP setup to sync time server. Several days ago due to power outage all servers are reboot. Due to DNS server did NOT up quickly, CENTOS servers start up and can NOT find time server. For CENTOS 5.X servers, it did quickly resync to time server after 30 minutes. For CENTOS 4.X servers, it have been 3 days still NOT sync to time server. I know I can run "service ntpd restart" to force server sync to time server, but I like to know how long it take for CENTOS 4.X automatic resync to time server. Thanks.

2 1

OT: Dropbox - Fedora Core 9 RPM will work on CentOS 5.4?
by Lanny Marcus 12 Apr '10

12 Apr '10

Dropbox has an RPM for Fedora Core 9 (x86). I am running CentOS 5.4 on my Desktop, which I believe is based on Fedora Core 6. Are the libraries Fedora Core 9 uses substantially different than those CentOS 5.4 uses? If Dropbox had an SRPM available, I would Download that and Rebuild, but I'm sure it is Proprietary and they won't release an SRPM to me. TIA! Lanny -------------------------------------- Magazine subscriptions Largest discount Credit/Debit Card Check Pay Pal http://www.lowcostmagazines.com/

4 7

'p' in boot selector & going into single-user
by ken 12 Apr '10

12 Apr '10

On boot, when I hit the F12 key to bring up the boot menu, the screen displays the various kernels and other boot options. In the text below this menu it says I can hit 'p' to bring up a menu with other options. I've done this with the last two boot-ups and no other menu or options appear. Is something missing? (I also tried Alt-p, Shift-p, Ctrl-p and a few other keys and there's no change onscreen.) I'd like to know also how to select single user mode, but haven't found a way to do that. Thanks much.

3 2

mysterious weekly shutdown
by Frank Cox 12 Apr '10

12 Apr '10

I have a Centos 5.4 machine that has, for the past two weeks, apparently been shut off over the weekend. It's just sitting there turned off on Monday morning and when someone hits the power switch it comes right back on and everything works again. This happened last weekend, and again over this past weekend. Here is /var/log/messages from shortly before it apparently shut down this weekend. Can anyone tell me what is or might be going on? Apr 10 11:01:27 answeringmachine vgetty[6012]: message keep, length=00:00:20, name='', caller=none, dev=ttyACM0, pid=6012 Apr 10 11:19:10 answeringmachine vgetty[6095]: message keep, length=00:00:24, name='', caller=none, dev=ttyACM0, pid=6095 Apr 10 11:43:56 answeringmachine vgetty[6134]: message keep, length=00:00:11, name='', caller=none, dev=ttyACM0, pid=6134 Apr 10 12:22:34 answeringmachine mgetty[6029]: fax dev=ttyS1, pid=6029, caller='none', name='', id='', +FHNG=074, pages=0/0, time=00:00:51 Apr 10 12:43:49 answeringmachine gconfd (freeads-3524): Exiting Apr 10 12:43:49 answeringmachine gdm[2872]: Master halting... Apr 10 12:43:49 answeringmachine pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Apr 10 12:43:50 answeringmachine shutdown[2872]: shutting down for system halt Apr 10 12:43:50 answeringmachine mgetty[6262]: failed dev=ttyS1, pid=6262, got signal 15, exiting Apr 10 12:43:50 answeringmachine mgetty[2874]: failed dev=ttyS2, pid=2874, got signal 15, exiting Apr 10 12:43:50 answeringmachine vgetty[2877]: failed dev=ttyACM1, pid=2877, got signal 15, exiting Apr 10 12:43:50 answeringmachine vgetty[6183]: failed dev=ttyACM0, pid=6183, got signal 15, exiting Apr 10 12:43:51 answeringmachine smartd[2854]: smartd received signal 15: Terminated Apr 10 12:43:51 answeringmachine smartd[2854]: smartd is exiting (exit status 0) Apr 10 12:43:52 answeringmachine avahi-daemon[2769]: Got SIGTERM, quitting. Apr 10 12:43:52 answeringmachine avahi-daemon[2769]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c0ff:fee3:f1b1. Apr 10 12:43:52 answeringmachine avahi-daemon[2769]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.6. Apr 10 12:43:52 answeringmachine mountd[2588]: Caught signal 15, un-registering and exiting. Apr 10 12:43:52 answeringmachine kernel: nfsd: last server has exited Apr 10 12:43:52 answeringmachine kernel: nfsd: unexporting all filesystems Apr 10 12:43:57 answeringmachine ntpd[2532]: ntpd exiting on signal 15 Apr 10 12:43:57 answeringmachine nm-system-settings: disconnected from the system bus, exiting. Apr 10 12:43:57 answeringmachine kernel: nm-system-setti[3083]: segfault at 0000000000000000 rip 0000000000000000 rsp 00007fffb3916778 error 14 Apr 10 12:43:57 answeringmachine rpc.statd[2349]: Caught signal 15, un-registering and exiting. Apr 10 12:43:57 answeringmachine auditd[2264]: The audit daemon is exiting. Apr 10 12:43:57 answeringmachine kernel: audit(1270925037.732:154): audit_pid=0 old=2264 by auid=4294967295 Apr 10 12:43:57 answeringmachine pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Apr 10 12:43:58 answeringmachine pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Apr 10 12:43:58 answeringmachine pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function Apr 10 12:43:58 answeringmachine pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Apr 10 12:43:59 answeringmachine kernel: Kernel logging (proc) stopped. Apr 10 12:43:59 answeringmachine kernel: Kernel log daemon terminating. Apr 10 12:44:00 answeringmachine exiting on signal 15 -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

4 11

how long NTP sync to time server on CENTOS 4.X????
by mcclnx mcc 12 Apr '10

12 Apr '10

We have several CENTOS 4 and 5 servers. ALL CENTOS servers have NTP setup to sync time server. Several days ago due to power outage all servers are reboot. Due to DNS server did NOT up quickly, CENTOS servers start up and can NOT find time server. For CENTOS 5.X servers, it did quickly resync to time server after 30 minutes. For CENTOS 4.X servers, it have been 3 days still NOT sync to time server. I know I can run "service ntpd restart" to force server sync to time server, but I like to know how long it take for CENTOS 4.X automatic resync to time server. Thanks.

2 1

Re: [CentOS] everything seems to hang, but system is idle? [SOLVED]
by Rudi Ahlers 12 Apr '10

12 Apr '10

On Mon, Apr 12, 2010 at 1:50 PM, JohnS <jses27(a)gmail.com> wrote: > > On Sun, 2010-04-11 at 15:48 +0200, Rudi Ahlers wrote: > >> Yes, I think it could be a problematic iscsi config. Now that I think >> of it, the server wasn't rebooted in about 2 or 3 months and I did >> some iscsi testing a while ago, but with a recent power outage it >> could have enabled / a faulty configuration, I just rebooted the >> server again, managed to the remove iscsi this time, and will see if >> this solves the problem. > --- > > Well along with that I would do a file system check. Then if it keeps > on stop just the nmbd service and not smbd for cifs sharing. > > John > > _______________________________________________ So far everything seems to be fine, apart from my Cobbler problem (see other thread). rsync has been running very well for the past few hours (have been deleting & restoring a lot of stuff to check ) so it was probably the improper iscsi mount that was giving issues. Thanx for all the help :) -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

2 1

Performance problems with XFS on Centos 5.4
by Bernhard Gschaider 12 Apr '10

12 Apr '10

Hi! During the last weeks I experienced some performance problems with a large file-system on XFS basis. Sometimes for instance ls is painfully. Immidiatly afterwards ls on the same directory is immidiate. I used strace on this ls and found that during the first ls the lstat-calls need approx 0.02s each while during the second ls the are two orders of magnitude faster. Googling around I stumbled upon some messages similar like this http://www.opensubscriber.com/message/linux-xfs@oss.sgi.com/1355060.html which have in common a) they're from around 2006 b) they suggest to increase a mount-option ihashsize. This mount option is listed as deprecated in the current kernel-doc So my question: does anyone have experience with that kind of performance problem? Do you think it is a XFS problem or are there some other tuning parameters in the kernel that could be modified for instance via /proc? The reason why I'm asking here is that it is a production file-system so I would be very unpopular if I experiment too much (a couple of reboots is OK ;) ) Bernhard PS: the situation got worse during the last weeks when the file-system increased in size, so the option that some kind of buffer now is too small and I'm experiencing some kind of thrashing seems very likely to me

2 2

Yum/WGET/HTTP sourceforge etc.
by tony.chamberlain＠lemko.com 12 Apr '10

12 Apr '10

I am having a problem with 5.4 that I did not have with 4.5. The problem happens only sometimes but in specific instances. Basically a summary of the problem is that certain network transactions timeout. The specfic instances are with wget, rpm, http. The problem usually, but not always, occurs with pptp stuff. (NOT running pptp but getting pptp stuff). For instance, the following command, which finishes in seconds on non-5.4 OS's: wget http://pptpclient.sourceforge.net/yum/stable/rhel4/pptp-release-current.noa… downloads about 20% then gets stuck. About 5 minutes later it downloads another 20% and then gets stuck, etc. The same thing with rpm: rpm -ivh http://pptpclient.sourceforge.net/yum/stable/rhel4/pptp-release-current.noa… waits about 3 minutes and then gives an error. I think it does the same thing as the wget but wget will keep trying, while rpm gives up. The error from rpm: Retrieving http://pptpclient.sourceforge.net/yum/stable/rhel4/pptp-release-current.noa… ..five minutes later: error: /var/tmp/rpm-xfer.DYY9e0: headerRead failed: hdr blob(7456): BAD, read returned 3568 error: /var/tmp/rpm-xfer.DYY9e0 cannot be installed I can wget the above as I mentioned before and install it that way. Before I do it, yum works fine. Afterwards, yum exhibits the same behavior of timing out (because it is using the pptp repository). Also visiting the pptp web site from Firefox times out on certain pages. I originally thought it was some problem with the pptp site, but I notice that log into hotmail.com does the same thin (fine on other operating systems). A view with Wireshark on the wget (pptp) shows the my machine receiving a reassembled TCPPDU from 216.34.181.96 (Sourceforge), sending an ack, receiving a reassembled PDU, sending an ack, receiving, sending followed by the 5 minutes or whatever of nothing. Then sourceforge sends an RST and a SYN and the process is repeated. Here is what I tried. When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 going through the router through Comcast is when I had the problem. So it is probably something with the router, but it is hard to figure out since CentOS 4.5 and Fedora do not exhibit this behavior, nor does 5.4 on most sites (mail.yahoo.com for instance). I did verify, at least from what I could, that ICMP type 3 and 4 are not being blocked. If they were, the same problem would happen on other op systems. And I was able to ping, albeit just locally, but we looked at the router settings and ping was not blocked. Anyone else have this problem / know what might be wrong?

3 2

everything seems to hang, but system is idle?
by Rudi Ahlers 12 Apr '10

12 Apr '10

Hi All, My one server recently started acting very weird. At fist I couldn't import any images with cobbler as rsync crashes the whole time. I was told to ask on the cobbler list (maybe it's not supported here?) but I left it at that (subscribed to far too many lists already). Yesteday I wanted to copy some stuff from a USB disk to the server (using rsync to update the files which have changed, or new files) but it seems like rsync hangs without any errors. Now, when I tried to update CentOS I get the same "error" in that yum hangs. At the same time I can open a new SSH session and do whatevery I like. But it seems that running a command which takes time to complete hangs. For example: ==================================================================================================================================================== Package Arch Version Repository Size ===================================================================================================================================================== Removing: iscsi-initiator-utils x86_64 6.2.0.871-0.12.el5_4.1 installed 1.9 M Removing for dependencies: gnome-applet-vm x86_64 0.1.2-1.el5 installed 121 k libvirt x86_64 0.6.3-20.1.el5_4 installed 7.1 M libvirt-python x86_64 0.6.3-20.1.el5_4 installed 431 k python-virtinst noarch 0.400.3-5.el5 installed 1.4 M virt-manager x86_64 0.6.1-8.el5 installed 4.9 M virt-viewer x86_64 0.0.2-3.el5 installed 48 k xen x86_64 3.0.3-94.el5_4.3 installed 4.7 M Transaction Summary ===================================================================================================================================================== Remove 8 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test [root@intranet Torrents]# mount /dev/sdc1 /mnt/ Even running "top" does the same, yet I can't kill "top" with CTRL+C, or even "killall -9 top" from a new SSH session. [root@intranet ~]# ps ax | grep top 20825 pts/6 R+ 0:00 grep top [root@intranet ~]# ps ax | grep rsync 6536 ? D 3:10 rsync -avz --progress /mnt/usb-backup/backups/current/home/www/linux/centos /home/www/linux/ 6537 ? Z 0:00 [rsync] <defunct> 8630 ? S 0:00 rsync -avz --progress --stats /mnt/usb-backup/backups/current/home/www/linux/ /home/www/linux/ 8631 ? Z 0:00 [rsync] <defunct> 20827 pts/6 R+ 0:00 grep rsync [root@intranet ~]# ps ax | grep yum 20390 pts/4 S+ 0:02 /usr/bin/python /usr/bin/yum remove iscsi-initiator-utils 20829 pts/6 R+ 0:00 grep yum [root@intranet ~]# /var/log/messages doesn't show me any errors. Any suggestions on this? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

5 11

NAT/DHCP/DNS/etc Settings from a Windows 2003 Server
by David Lemcoe 12 Apr '10

12 Apr '10

Hello all. I'm in the process of making a small server farm based mostly on Windows Server 2003. For simplicity's sake, the only non-2003 server will be a CentOS 5.4 server running only vsftpd, httpd, and mysqld. My plan is to have this server in a 2003 Server's network receiving a DHCP address from the Domain Controller. Currently, I have two other (non-DC) servers running with no issues on the domain. NAT works as it should, and internet access is just fine. The CentOS box on the same network will not receive an IP address (only through static configuration, the non-DC 2003 boxes have no problem receiving an IP and DNS settings with auto settings) or get online. Even when defining a static IP on the CentOS box, there is no Internet access, unlike to the other clients. My question is, what could be restricting the DHCP and DNS information to the CentOS host, and why can't I access the internet/NAT forward a web server? To summarize, I have four machines involved, all located on the same network: - Machine 1 - Windows Server 2003 Enterprise - Domain Controller, DHCP server, DNS server, NAT server. - Machine 2 - Windows Server 2003 Enterprise - Domain member, Exchange server. - Receives DHCP and DNS information with automatic network settings. - Has internet access through NAT. - NAT forwards ports to this host. - Machine 3 - Windows Server 2003 Enterprise - Domain member, Sharepoint Server. - Receives DHCP and DNS information with automatic network settings. - Has internet access through NAT. - NAT forwards ports to this host. - *Machine 4* - CentOS 5.4 - On same network as other clients, hosts web server. - Does *NOT *receive DHCP address or DNS information. - Has *no *internet access - NAT does *NOT *forward correctly. I am looking for a solution to get the CentOS server on the network like the other clients. Any assistance on this problem would be greatly appreciated. David

8 10

Hosting Reco
by Joseph L. Casale 12 Apr '10

12 Apr '10

I have two needs that require offsite hosting now, anyone know offhand of any of the unlimited storage/bandwidth vendors that exist now that allow remote scp|rsync access to the data, not just "in shell scp use"? I'm hunting around and its apparently hard to get a straight answer... vps or dedicated is overkill for this one need, and none of those offerings have the storage/bandwidth of the hosting only solutions. Thanks! jlc

2 1

(no subject)
by Les Mikesell 11 Apr '10

11 Apr '10

http://NikoleLilly8355.co.cc

1 0

ulimit
by Matt 11 Apr '10

11 Apr '10

I need to to change the ulimit to 16384(ulimit -n 16384) on boot on Centos 5.4 64 bit. How do I do that? Been searching and have yet to find a good answer. Tried to do it in rc.local but it appears to happen to late there. Matt

4 7

(no subject)
by Les Mikesell 11 Apr '10

11 Apr '10

http://EleaseDusen2292.co.cc

7 7

pkcs11-helper-devel is needed
by cahit Eyigünlü 10 Apr '10

10 Apr '10

how could i install pkcs11 on 64 cent os 5.4 :S it always asking me for pkcs11-helper but i've already installing [root@vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [root@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarÄ±: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64 [root@vpn VpnSetup]# rpm -ivh pkcs11-helper-1.07-5.3.src.rpm uyarÄ±: pkcs11-helper-1.07-5.3.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 3dbdc284 1:pkcs11-helper ########################################### [100%] [root@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarÄ±: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64

5 10

is skype using encryption?
by Jozsi Vadkan 10 Apr '10

10 Apr '10

Can someone [same subnet, e.g.: with a hub, not switch..] sniff my skype password when i'm using Skype? Is it encrypted? Thank you for the info

2 2

VPN
by cahit Eyigünlü 10 Apr '10

10 Apr '10

is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else thank you very much i am glad for all your help i will rent a new server after complete a working system on virtual machine thanks ..

5 13

file sharing?
by Roland Roland 10 Apr '10

10 Apr '10

Hi all, I've inherited from a previous It personnel a centos server which works as a fileserver and at the same time has one Vmware (windows xp) working on it. due to file server data load, the windows xp services get unreachable until the data transfer from the fileserver itself slows down.. the NIC max out its transfer speed.. the same server has two * 1 GB nics one is currently being used.. my question is this: is there a way to make the afp/smb services work only one ONE nic.. in other words users accessing the shared files from a specific NIC.. that way I can divide the load. file transfers goes from one NIC and windows services gets reached from the other..(different IPs) doo all this make any sense? is there any other way of solving this (other than moving the VM elsewhere) ? thanks in advance for yoru help __________ Information from ESET Smart Security, version of virus signature database 5015 (20100410) __________ The message was checked by ESET Smart Security. http://www.eset.com

4 3

Cobbler import files with rsync error
by Rudi Ahlers 10 Apr '10

10 Apr '10

Hi all, I'm trying to import in image into Cobbler (working with this: https://fedorahosted.org/cobbler/wiki/UsingCobblerImport) but keep on getting the following error: total size is 322467472 speedup is 1.00 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Command failed I mounted an ISO image and started the import as follows: [root@intranet ~]# mount -o loop /home/data/ISO/openfiler-2.3-x86.iso /mnt/dvd/ [root@intranet ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/nas-root 9.7G 5.5G 3.8G 60% / /dev/mapper/nas-home 434G 312G 100G 76% /home /dev/md0 99M 64M 31M 68% /boot tmpfs 869M 0 869M 0% /dev/shm none 869M 104K 869M 1% /var/lib/xenstored /dev/sdb1 75G 66G 8.7G 89% /mnt/usb-moviez /home/data/ISO/openfiler-2.3-x86.iso 315M 315M 0 100% /mnt/dvd [root@intranet ~]# cobbler import --path=/mnt/dvd --name="Openfiler 2.3" The problem is, as soon as I get this error, I can't re-import the exact same image and need to specify a new name as well. How do I clear this up? "cobbler image list" doesn't show the failed-imported images. -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

3 4

sed a particular line in file
by Tom Brown 10 Apr '10

10 Apr '10

I need to change a value in a file, but this line occurs more than once in this file therefore as i know the line number this value appears on how can i change that? I thought i could use sed to change a particular line number but i dont see that in the man page, i am trying to change a value from line number 6 thanks

2 2

Build Issue with multi module project
by Vijay Shanker Dubey 10 Apr '10

10 Apr '10

Hi, I have a multi module web project. Four modules of the project are packaged as jar and added as dependency to the fifth module, which is packaged as war. When it is time to deploy the application i just run package on the war project and my war is created with all the dependencies. Now there is a problem. One of the my module have heavy changes. Now when i created war for my projects these changes was not reflected in the output war file(the jar in lib folder of war has still the old code). Can you please point the things i am missing from the release process? Why the old code is being packaged with the war? Regards, Vijay Shanker Dubey

1 1

Kernel Panic Help
by Matt 09 Apr '10

09 Apr '10

I have a CentOS 5.4 64 bit server running on a supermicro motherboard. It kernel paniced last night. http://www.freeimagehosting.net/image.php?c51cb1be89.jpg Any ideas? Its running the latest version of Squid available with yum. Memory issue? Would adding: kernel.panic = 10 to: /etc/sysctl.conf Have caused it to reboot after 10 seconds instead of just sitting there? Matt

2 1

iptables info in proc - ttl
by Carlos S 09 Apr '10

09 Apr '10

Hello List, I am having problem in getting iptables recent module working for me, so I was looking into /proc to get some clues. I see following line in the /proc for my iptables recent rule: # cat /proc/net/ipt_recent/badguy src=10.0.0.17 ttl: 63 last_seen: 3301974512 oldest_pkt: 2 3301973507, 3301974512 What does ttl mean? Is it time-to-live or what? What does it signify? -- CS

1 0

about the bug of BCM57780
by mojian4linux 09 Apr '10

09 Apr '10

https://bugzilla.redhat.com/show_bug.cgi?id=525966 ------------------------------- Was this bug found on centos5.4

1 0

Kernel panic due to vg00 not found while not using LVM at all
by Peter Blajev 09 Apr '10

09 Apr '10

Hi, I have a system running CentOS4.8. Last month I installed the latest updates including kernel 2.6.9-89.0.23 and rebooted the system. It has been running for almost a month. Last night I updated the system again which updated only a few packages: openssl, tzdata, curl,vixie-cron and logrotate. No new kernel or anything out of ordinary. The reboot after the update stopped with kernel panic: --<snip>-- Loading dm-snapshot.ko module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group vg00 not found ERROR: /bin/lvm exited abnormaly! Creating root device --<snip>-- After that it's trying to mount root and it fails with kernel panic. This system is using disk partitions. It's not using LVM. I can boot in rescue mode and "chmod /mnt/sysimage". All partitons are there and mountable. No fsck errors. I checked /boot/grub/grub.conf and it looks fine to me. The time stamp was from last month when I did the first update. Also there are no new files in /boot since the update from last month. Why is it looking for logical volumes? Any idea? Thanks Peter

2 1

CentOS press kit
by Geerd-Dietger Hoffmann 08 Apr '10

08 Apr '10

Hey Looking at the Fedora ML there is some commotion about a Press Kit [1] they are constructing. I am thinking about doing something like this for CentOS. Now comes my question, what do people think should belong in such a kit. Do you think this is needed? Cheers for your help, Didi [1] https://fedoraproject.org/wiki/F13_press_kit -- Hoffmann Geerd-Dietger http://contact.ribalba.de

6 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss