- Discuss - lists.centos.org

CentOS-announce Digest, Vol 61, Issue 9
by centos-announce-request＠centos.org 29 Mar '10

29 Mar '10

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2010:0153 Moderate CentOS 5 i386 thunderbird Update (Karanbir Singh) 2. CESA-2010:0153 Moderate CentOS 5 x86_64 thunderbird Update (Karanbir Singh) 3. CEBA-2010:0158 CentOS 5 x86_64 kvm Update (Karanbir Singh) 4. CESA-2010:0166 Moderate CentOS 5 i386 gnutls Update (Karanbir Singh) 5. CESA-2010:0166 Moderate CentOS 5 x86_64 gnutls Update (Karanbir Singh) 6. CEEA-2010:0156 CentOS 5 i386 kmod-lpfc Update (Karanbir Singh) 7. CEEA-2010:0156 CentOS 5 x86_64 kmod-lpfc Update (Karanbir Singh) 8. CEBA-2010:0151 CentOS 5 x86_64 cyrus-sasl Update (Karanbir Singh) 9. CEBA-2010:0151 CentOS 5 i386 cyrus-sasl Update (Karanbir Singh) 10. CESA-2010:0162 Important CentOS 5 i386 openssl Update (Karanbir Singh) 11. CESA-2010:0162 Important CentOS 5 x86_64 openssl Update (Karanbir Singh) 12. CESA-2010:0164 Moderate CentOS 5 x86_64 openssl097a Update (Karanbir Singh) 13. CESA-2010:0164 Moderate CentOS 5 i386 openssl097a Update (Karanbir Singh) 14. CEBA-2010:0174 CentOS 5 i386 strace Update (Karanbir Singh) 15. CEBA-2010:0174 CentOS 5 x86_64 strace Update (Karanbir Singh) 16. CEBA-2010:0176 CentOS 5 x86_64 pidgin Update (Karanbir Singh) 17. CEBA-2010:0176 CentOS 5 i386 pidgin Update (Karanbir Singh) 18. CESA-2010:0165 Moderate CentOS 5 x86_64 nss Update (Karanbir Singh) 19. CESA-2010:0165 Moderate CentOS 5 i386 nss Update (Karanbir Singh) 20. CESA-2010:0168 Moderate CentOS 5 i386 httpd Update (Karanbir Singh) 21. CESA-2010:0168 Moderate CentOS 5 x86_64 httpd Update (Karanbir Singh) 22. CESA-2010:0167 Moderate CentOS 4 i386 gnutls - security update (Tru Huynh) 23. CESA-2010:0167 Moderate CentOS 4 x86_64 gnutls - security update (Tru Huynh) 24. CESA-2010:0165 Moderate CentOS 4 i386 nss - security update (Tru Huynh) 25. CESA-2010:0165 Moderate CentOS 4 x86_64 nss - security update (Tru Huynh) 26. CESA-2010:0163 Moderate CentOS 4 i386 openssl - security update (Tru Huynh) 27. CESA-2010:0163 Moderate CentOS 4 x86_64 openssl - security update (Tru Huynh) 28. CESA-2010:0173 Important CentOS 4 i386 openssl096b - security update (Tru Huynh) 29. CESA-2010:0173 Important CentOS 4 x86_64 openssl096b - security update (Tru Huynh) 30. CESA-2010:0175 Low CentOS 4 i386 httpd security, bug fix, and enhancement update (Tru Huynh) 31. CESA-2010:0175 Low CentOS 4 x86_64 httpd security, bug fix, and enhancement update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 26 Mar 2010 20:37:29 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0153 Moderate CentOS 5 i386 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20100326203729.GA5005(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0153 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0153.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 789a4392a22c426103a05b51eb51b8c7 thunderbird-2.0.0.24-2.el5.centos.i386.rpm Source: 5fd5ef4d07813912bf974e45d52a85eb thunderbird-2.0.0.24-2.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 26 Mar 2010 20:37:29 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0153 Moderate CentOS 5 x86_64 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20100326203729.GA5018(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0153 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0153.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: b26577d8dd23457f258bbd03ca6e2442 thunderbird-2.0.0.24-2.el5.centos.x86_64.rpm Source: 5fd5ef4d07813912bf974e45d52a85eb thunderbird-2.0.0.24-2.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 26 Mar 2010 20:47:27 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0158 CentOS 5 x86_64 kvm Update To: centos-announce(a)centos.org Message-ID: <20100326204727.GA5124(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0158 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0158.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 8a218f178a2246e1b14fac88b15dfe60 kmod-kvm-83-105.el5_4.28.x86_64.rpm 13b64b022dd92b43e2249ddf9a94b68b kvm-83-105.el5_4.28.x86_64.rpm 6ddbb626743c0d9a7a7199c5a92fdc2e kvm-qemu-img-83-105.el5_4.28.x86_64.rpm 34c48693908800113769db3747f41a91 kvm-tools-83-105.el5_4.28.x86_64.rpm Source: 5360764a7653ce94cf2d189ce99a8e8c kvm-83-105.el5_4.28.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 26 Mar 2010 21:48:08 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0166 Moderate CentOS 5 i386 gnutls Update To: centos-announce(a)centos.org Message-ID: <20100326214808.GA5315(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0166 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0166.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 0336d624dee8cd33c04e0fab51d8656d gnutls-1.4.1-3.el5_4.8.i386.rpm c53d51ecb020b9532641e7640dd41d41 gnutls-devel-1.4.1-3.el5_4.8.i386.rpm 0d1f460735785b202e2aafb200623ac1 gnutls-utils-1.4.1-3.el5_4.8.i386.rpm Source: 46bb8c13348df6fc6706e152eb2d0125 gnutls-1.4.1-3.el5_4.8.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 26 Mar 2010 21:48:08 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0166 Moderate CentOS 5 x86_64 gnutls Update To: centos-announce(a)centos.org Message-ID: <20100326214808.GA5329(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0166 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0166.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 2eb372ef4dd9da7e03c2fcffbb932b9f gnutls-1.4.1-3.el5_4.8.i386.rpm 4710b94e81afacb90722cb8bf4eda618 gnutls-1.4.1-3.el5_4.8.x86_64.rpm 85b44fdb4bd7e96b69ea52d5df6aa372 gnutls-devel-1.4.1-3.el5_4.8.i386.rpm aa7102aa74ffdcd203a2ca7d76e14909 gnutls-devel-1.4.1-3.el5_4.8.x86_64.rpm 556f9cdf46a96aa6d115e236df1ad964 gnutls-utils-1.4.1-3.el5_4.8.x86_64.rpm Source: 46bb8c13348df6fc6706e152eb2d0125 gnutls-1.4.1-3.el5_4.8.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Fri, 26 Mar 2010 21:50:51 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEEA-2010:0156 CentOS 5 i386 kmod-lpfc Update To: centos-announce(a)centos.org Message-ID: <20100326215051.GA5404(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2010:0156 Upstream details at : http://rhn.redhat.com/errata/RHEA-2010-0156.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: b26004db2b4479e8229913b2783139cf kmod-lpfc-PAE-rhel5u4-8.2.0.63.1p-1.4.el5_4.i686.rpm 6c7c0ab2ea8f812f6ec0c26a746a04a5 kmod-lpfc-rhel5u4-8.2.0.63.1p-1.4.el5_4.i686.rpm 171bc8b4eb9f02317bc719499d12cdab kmod-lpfc-xen-rhel5u4-8.2.0.63.1p-1.4.el5_4.i686.rpm Source: 59fb1fe000ceb253e7e27f0bd2aaaa66 lpfc-kmod-8.2.0.63.1p-1.4.el5_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Fri, 26 Mar 2010 21:50:51 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEEA-2010:0156 CentOS 5 x86_64 kmod-lpfc Update To: centos-announce(a)centos.org Message-ID: <20100326215051.GA5418(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2010:0156 Upstream details at : http://rhn.redhat.com/errata/RHEA-2010-0156.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 787036f097504e710495f522bfe48661 kmod-lpfc-rhel5u4-8.2.0.63.1p-1.4.el5_4.x86_64.rpm 11899040b4af01ec087e0fa82d580c87 kmod-lpfc-xen-rhel5u4-8.2.0.63.1p-1.4.el5_4.x86_64.rpm Source: 59fb1fe000ceb253e7e27f0bd2aaaa66 lpfc-kmod-8.2.0.63.1p-1.4.el5_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Sat, 27 Mar 2010 17:27:09 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0151 CentOS 5 x86_64 cyrus-sasl Update To: centos-announce(a)centos.org Message-ID: <20100327172709.GA22650(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0151 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0151.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: c6a64e82bef34b589e7bc8a883f815a8 cyrus-sasl-2.1.22-5.el5_4.3.i386.rpm ed8d69dab4601e7826f686738d20a5f5 cyrus-sasl-2.1.22-5.el5_4.3.x86_64.rpm 2c8283dcce33642ae73395ec4b8c04fd cyrus-sasl-devel-2.1.22-5.el5_4.3.i386.rpm a3457e6b1c425e66e87bb930863b811f cyrus-sasl-devel-2.1.22-5.el5_4.3.x86_64.rpm 04345892778ea85b26915a4a481c1613 cyrus-sasl-gssapi-2.1.22-5.el5_4.3.i386.rpm 5bc3b200e57aacf013bbc8b43c0af3d8 cyrus-sasl-gssapi-2.1.22-5.el5_4.3.x86_64.rpm 40ed57e5621676d6d76d1bf916ce1376 cyrus-sasl-ldap-2.1.22-5.el5_4.3.i386.rpm e755980bebd84f5851da9a0a9c86c559 cyrus-sasl-ldap-2.1.22-5.el5_4.3.x86_64.rpm e4080bd29bde87744f93c2a7fbe59975 cyrus-sasl-lib-2.1.22-5.el5_4.3.i386.rpm 22dc8d781a2f7c43b10a7dca767841c3 cyrus-sasl-lib-2.1.22-5.el5_4.3.x86_64.rpm 45f19286d5ea0d9553dbd9d650dfedaa cyrus-sasl-md5-2.1.22-5.el5_4.3.i386.rpm 4191386d59c26055ff3b00e32400fcfa cyrus-sasl-md5-2.1.22-5.el5_4.3.x86_64.rpm 64a30d3737ce9eecec7b5e28f8c12d88 cyrus-sasl-ntlm-2.1.22-5.el5_4.3.i386.rpm ad1e0c8b3134363c333e00edb2f1fc35 cyrus-sasl-ntlm-2.1.22-5.el5_4.3.x86_64.rpm 6310275fff8a8d698619dd8c9b346f24 cyrus-sasl-plain-2.1.22-5.el5_4.3.i386.rpm 09cf9afa41b68c1a419ba825580f3b9b cyrus-sasl-plain-2.1.22-5.el5_4.3.x86_64.rpm c4aa4b383307ece2d9c92d5811a9b3b0 cyrus-sasl-sql-2.1.22-5.el5_4.3.i386.rpm a97f30a000a7a7a3a30544bfc7d1a9c1 cyrus-sasl-sql-2.1.22-5.el5_4.3.x86_64.rpm Source: 1dc6925f9a6e57bb4673af7cf9d61622 cyrus-sasl-2.1.22-5.el5_4.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Sat, 27 Mar 2010 17:27:09 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0151 CentOS 5 i386 cyrus-sasl Update To: centos-announce(a)centos.org Message-ID: <20100327172709.GA22635(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0151 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0151.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 88ae6b8e2097886aa9c9dfc98a026433 cyrus-sasl-2.1.22-5.el5_4.3.i386.rpm 957e4a5c6ea882bcade6fa0a1c52ddef cyrus-sasl-devel-2.1.22-5.el5_4.3.i386.rpm 73a004caa8ec99a5416d23476cb63e9c cyrus-sasl-gssapi-2.1.22-5.el5_4.3.i386.rpm 03d4ff32d928bfab7bb76e056c99aabc cyrus-sasl-ldap-2.1.22-5.el5_4.3.i386.rpm 2f3f13ea1d622e941fee383defd9e76a cyrus-sasl-lib-2.1.22-5.el5_4.3.i386.rpm da38782aa6239823fa96bbee836d369f cyrus-sasl-md5-2.1.22-5.el5_4.3.i386.rpm f0c35840d931e601e6b0fcbdfcd8efdc cyrus-sasl-ntlm-2.1.22-5.el5_4.3.i386.rpm 82751b827097eef29578aac8d82bf055 cyrus-sasl-plain-2.1.22-5.el5_4.3.i386.rpm 4607b6edacca061fd2cc77ccef0d209f cyrus-sasl-sql-2.1.22-5.el5_4.3.i386.rpm Source: 1dc6925f9a6e57bb4673af7cf9d61622 cyrus-sasl-2.1.22-5.el5_4.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Sat, 27 Mar 2010 17:30:13 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0162 Important CentOS 5 i386 openssl Update To: centos-announce(a)centos.org Message-ID: <20100327173013.GA22749(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0162 Important Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0162.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 68d724bc8d07b615f33072fa7d6b0084 openssl-0.9.8e-12.el5_4.6.i386.rpm 599ca9bf58a230f3049a7dedd2fc2f92 openssl-0.9.8e-12.el5_4.6.i686.rpm 57a102fa18369f5ffdc4040862953300 openssl-devel-0.9.8e-12.el5_4.6.i386.rpm 68078f91524e885a42103c805047c193 openssl-perl-0.9.8e-12.el5_4.6.i386.rpm Source: 75144dc05a79efe3a6e02b2c20cc31f9 openssl-0.9.8e-12.el5_4.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Sat, 27 Mar 2010 17:30:13 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0162 Important CentOS 5 x86_64 openssl Update To: centos-announce(a)centos.org Message-ID: <20100327173013.GA22764(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0162 Important Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0162.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 10bb4db12fd8d412cf416446a125fe0d openssl-0.9.8e-12.el5_4.6.i686.rpm 8dbfb00478d3eb5fdc34e07f2d47ea30 openssl-0.9.8e-12.el5_4.6.x86_64.rpm 261af9d8c6e0fe23f55502cc449de08a openssl-devel-0.9.8e-12.el5_4.6.i386.rpm 6992670e0577168719ace5bcf2596fc9 openssl-devel-0.9.8e-12.el5_4.6.x86_64.rpm 2039bbc051120406ca9b371149dc406a openssl-perl-0.9.8e-12.el5_4.6.x86_64.rpm Source: 75144dc05a79efe3a6e02b2c20cc31f9 openssl-0.9.8e-12.el5_4.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 12 Date: Sat, 27 Mar 2010 17:44:36 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0164 Moderate CentOS 5 x86_64 openssl097a Update To: centos-announce(a)centos.org Message-ID: <20100327174436.GA22862(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0164 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0164.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 0638bc08efe802d72dd016be3a6b9f3b openssl097a-0.9.7a-9.el5_4.2.i386.rpm f242103448ed0d1b85bcad73d333b1a9 openssl097a-0.9.7a-9.el5_4.2.x86_64.rpm Source: b97be692aae229bf3f0407e2912e19b4 openssl097a-0.9.7a-9.el5_4.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 13 Date: Sat, 27 Mar 2010 17:44:36 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0164 Moderate CentOS 5 i386 openssl097a Update To: centos-announce(a)centos.org Message-ID: <20100327174436.GA22846(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0164 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0164.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 0638bc08efe802d72dd016be3a6b9f3b openssl097a-0.9.7a-9.el5_4.2.i386.rpm Source: b97be692aae229bf3f0407e2912e19b4 openssl097a-0.9.7a-9.el5_4.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 14 Date: Sat, 27 Mar 2010 17:50:34 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0174 CentOS 5 i386 strace Update To: centos-announce(a)centos.org Message-ID: <20100327175034.GA23002(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0174 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0174.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 924b710ebfbf8540fa87d553f351688e strace-4.5.18-5.el5_4.4.i386.rpm Source: ecfcebb953508adb88f4b864efadd1d5 strace-4.5.18-5.el5_4.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 15 Date: Sat, 27 Mar 2010 17:50:34 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0174 CentOS 5 x86_64 strace Update To: centos-announce(a)centos.org Message-ID: <20100327175034.GA23016(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0174 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0174.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: cd8b769f9ad49dff14492100822fca19 strace-4.5.18-5.el5_4.4.x86_64.rpm Source: ecfcebb953508adb88f4b864efadd1d5 strace-4.5.18-5.el5_4.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 16 Date: Sat, 27 Mar 2010 17:52:46 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0176 CentOS 5 x86_64 pidgin Update To: centos-announce(a)centos.org Message-ID: <20100327175246.GA23173(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0176 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0176.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 8be636e0791de1fac2ec132e9b826001 finch-2.6.6-2.el5_4.i386.rpm 607baed9ec811098496cd96f227d6874 finch-2.6.6-2.el5_4.x86_64.rpm 5535f34f279fdcb27323a09b6ba9c4dc finch-devel-2.6.6-2.el5_4.i386.rpm 17bf48d98c55b4cd8e0c239b904eae4f finch-devel-2.6.6-2.el5_4.x86_64.rpm 5f6271951c130a273fb3a3800bd95f46 libpurple-2.6.6-2.el5_4.i386.rpm ac79797e2c98a8c2f25addeebdfecb64 libpurple-2.6.6-2.el5_4.x86_64.rpm f2cbbe07896319ecbe2bca24d6b3cb65 libpurple-devel-2.6.6-2.el5_4.i386.rpm c645c1d13270b23ae7efc4f98cd0e813 libpurple-devel-2.6.6-2.el5_4.x86_64.rpm a00dc01851e25ffe9542674196f6fd11 libpurple-perl-2.6.6-2.el5_4.x86_64.rpm 83b1598f559999838b1bb6a44ffd0201 libpurple-tcl-2.6.6-2.el5_4.x86_64.rpm 42cff275d97b3a27c4c01cb1902aa6bf pidgin-2.6.6-2.el5_4.i386.rpm 096c5979700ae40de29dae37809474e2 pidgin-2.6.6-2.el5_4.x86_64.rpm 7c10d8838b53f43900b4148f595ae4e6 pidgin-devel-2.6.6-2.el5_4.i386.rpm f8032843dc9688f535a75241cdf654cd pidgin-devel-2.6.6-2.el5_4.x86_64.rpm 171dba9474cbfa182e08d22a0d3579e8 pidgin-perl-2.6.6-2.el5_4.x86_64.rpm Source: 4f5cb3f5ab7816b234095f5fb739e2de pidgin-2.6.6-2.el5_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 17 Date: Sat, 27 Mar 2010 17:52:46 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2010:0176 CentOS 5 i386 pidgin Update To: centos-announce(a)centos.org Message-ID: <20100327175246.GA23159(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2010:0176 Upstream details at : http://rhn.redhat.com/errata/RHBA-2010-0176.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: f6df03421851896d9bd9674c52f31621 finch-2.6.6-2.el5_4.i386.rpm 30d6c12dbda566d835d7fa3eca86abe6 finch-devel-2.6.6-2.el5_4.i386.rpm be6cdd65a29b03c34f5485f70f1ceed4 libpurple-2.6.6-2.el5_4.i386.rpm 8f3c247578228b576512bcb0e93087b6 libpurple-devel-2.6.6-2.el5_4.i386.rpm 51858e1be32d8e6434d817c826d1587e libpurple-perl-2.6.6-2.el5_4.i386.rpm 624af3a96d4a0af339db9fd79c988938 libpurple-tcl-2.6.6-2.el5_4.i386.rpm 8dd2f337fa212b22ab20d4ee45b2ad5a pidgin-2.6.6-2.el5_4.i386.rpm 0d21a282c06a53d564ce8f4c6564a991 pidgin-devel-2.6.6-2.el5_4.i386.rpm b4d5f10bc95f63662c5663a263c62765 pidgin-perl-2.6.6-2.el5_4.i386.rpm Source: 4f5cb3f5ab7816b234095f5fb739e2de pidgin-2.6.6-2.el5_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 18 Date: Sun, 28 Mar 2010 15:36:51 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0165 Moderate CentOS 5 x86_64 nss Update To: centos-announce(a)centos.org Message-ID: <20100328153651.GA21389(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0165 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0165.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: d678af0805ff84a1fc8266862df0cd3c nspr-4.8.4-1.el5_4.i386.rpm 6c9064fa9edec639f9eca3d521ebc593 nspr-4.8.4-1.el5_4.x86_64.rpm bbc6dd23797643127fcd71585e29ca67 nspr-devel-4.8.4-1.el5_4.i386.rpm 502576415990646717c6dd67ed87f20b nspr-devel-4.8.4-1.el5_4.x86_64.rpm 596f765efc9f4f85f7a465505bc86479 nss-3.12.6-1.el5.centos.i386.rpm b6895a5c5d80fe30f77c259d52eed42b nss-3.12.6-1.el5.centos.x86_64.rpm 2f5fd28490b23996656a620212d4cd91 nss-devel-3.12.6-1.el5.centos.i386.rpm 786627337c3212f581c46b37bc048c15 nss-devel-3.12.6-1.el5.centos.x86_64.rpm be92cc3cd725c369b61ac85232a944fc nss-pkcs11-devel-3.12.6-1.el5.centos.i386.rpm 67fc3ea7ef426104c21f709a3206dc1a nss-pkcs11-devel-3.12.6-1.el5.centos.x86_64.rpm 0f815410498dc725ff0380c24a9d0a4e nss-tools-3.12.6-1.el5.centos.x86_64.rpm Source: 6a7c2a9a6bef3fe11849c6c861e4681c nspr-4.8.4-1.el5_4.src.rpm 72e38169ad1cdaa072864e77934b0418 nss-3.12.6-1.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 19 Date: Sun, 28 Mar 2010 15:36:50 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0165 Moderate CentOS 5 i386 nss Update To: centos-announce(a)centos.org Message-ID: <20100328153650.GA21374(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0165 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0165.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 347f8ce54033a21f750493d0dcc3ba6f nspr-4.8.4-1.el5_4.i386.rpm e48278b7734b2052a08c35d3446fa514 nspr-devel-4.8.4-1.el5_4.i386.rpm ce04aef7628e3dcfa00c88dac851effd nss-3.12.6-1.el5.centos.i386.rpm cd751ebd4c0fa9278279b2c3628500ff nss-devel-3.12.6-1.el5.centos.i386.rpm 43c31c82b5cb2b66f1704c9ee92b60f2 nss-pkcs11-devel-3.12.6-1.el5.centos.i386.rpm d2d92936c39b3f13da13a0ded3d3796e nss-tools-3.12.6-1.el5.centos.i386.rpm Source: 6a7c2a9a6bef3fe11849c6c861e4681c nspr-4.8.4-1.el5_4.src.rpm 72e38169ad1cdaa072864e77934b0418 nss-3.12.6-1.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 20 Date: Sun, 28 Mar 2010 15:40:00 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0168 Moderate CentOS 5 i386 httpd Update To: centos-announce(a)centos.org Message-ID: <20100328154000.GA21476(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0168 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0168.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 00c9c5bc25902ab67911259a40e92398 httpd-2.2.3-31.el5.centos.4.i386.rpm def4c9a899b204553d38421ea559595c httpd-devel-2.2.3-31.el5.centos.4.i386.rpm 42a5bf98734d2721679aaf6d1cacd4c2 httpd-manual-2.2.3-31.el5.centos.4.i386.rpm 53a201ba5534777b71291ae71d30cbef mod_ssl-2.2.3-31.el5.centos.4.i386.rpm Source: 297639db490c5801b8ed7bac1353fc44 httpd-2.2.3-31.el5.centos.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 21 Date: Sun, 28 Mar 2010 15:40:00 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2010:0168 Moderate CentOS 5 x86_64 httpd Update To: centos-announce(a)centos.org Message-ID: <20100328154000.GA21491(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2010:0168 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2010-0168.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: a3171a6920b95949afc23cfa9f3dd1a7 httpd-2.2.3-31.el5.centos.4.x86_64.rpm 6916d9aa701e0eb95200a140f040d70f httpd-devel-2.2.3-31.el5.centos.4.i386.rpm d9fbb522e6a54e5becc99948bf50bfae httpd-devel-2.2.3-31.el5.centos.4.x86_64.rpm 74e21bdf12c6c5a369044e1a24a29bc4 httpd-manual-2.2.3-31.el5.centos.4.x86_64.rpm 7c33337c5116fc2f0282e11c5dea1c56 mod_ssl-2.2.3-31.el5.centos.4.x86_64.rpm Source: 297639db490c5801b8ed7bac1353fc44 httpd-2.2.3-31.el5.centos.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 22 Date: Sun, 28 Mar 2010 22:02:51 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2010:0167 Moderate CentOS 4 i386 gnutls - security update To: centos-announce(a)centos.org Message-ID: <20100328200251.GE27064(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2010:0167 gnutls security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2010-0167.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/gnutls-1.0.20-4.el4_8.7.i386.rpm updates/i386/RPMS/gnutls-devel-1.0.20-4.el4_8.7.i386.rpm source: updates/SRPMS/gnutls-1.0.20-4.el4_8.7.src.rpm You may update your CentOS-4 i386 installations by running the command: yum update gnutls\* Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

the T-bird update
by m.roth＠5-cent.us 29 Mar '10

29 Mar '10

Ok, new updates over the weekend. Just tested it on one server, with the result that I think there's a bug with the thunderbird package. As in, Updating : thunderbird 10/28 Could not parse file '/usr/share/applications/redhat-userpasswd.desktop': desktop entry does not have group 'Desktop Entry' So, someone's got their cases wrong, or they forgot to put an ignore case flag on. Should I file a bug report? mark

1 0

Running commercial softwares on CentOS
by Rahul Tidke 29 Mar '10

29 Mar '10

Hello! How can I use CentOS as a complete desktop OS? I want to run Autodesk products on it like AutoCAD,Revit,3D Max,etc. Does Wine (winehq) support running such software? Can I use (KVM,Xen) virtualization to run Windows XP and all commercial software on it? Does running XP in virtualization requires a license? Regards, Rahul Tidke

6 7

remove openssl
by cahit Eyigünlü 29 Mar '10

29 Mar '10

i am trying to install plesk but my cent os has a newer version of open ssl that is why my setup is interrupting, how could i remove open ssl ? i tryed yum remove openssl but it encounter lots of errors i want to remove only the open ssl not the related files like wget networkmanager ...

5 6

Problem burning DVD+RW discs
by Dick Roth 29 Mar '10

29 Mar '10

Good Day-- I've been backing up my essential stuff to DVD+R discs for quite a while with no trouble at all. Last week I tried backing up to a DVD+RW with no trouble at all. This week, when trying to re-write my weekly backup, CD/DVD Creator told me it could not write to the disc because it was read-only. Is there a bug in CD/DVD Creator or am I doing something incorrectly. Obviously, I'd like to be able to reuse discs if I can, but can go back to using one-use DVDs if necessary. Thanks for any help. Dick -- "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin 1755

3 3

Back up to Rackspace Cloud Files from a CentOS server
by Matt Arnilo S. Baluyos (Mailing Lists) 28 Mar '10

28 Mar '10

Hi all, I'm looking for a solution to be able to back up to a Rackspace Cloud Files account from a CentOS server. I have set up Duplicity but have found out that the back-ups are in GPG-encrypted volumes. There are also GUI clients for Windows and Mac but they're not what I need. I'm looking for something like a command-line tool that will let me push directories on the server (via rsync perhaps) to the Rackspace Cloud Files container. Being able to run it non-interactively on the shell is a requirement because I need to be able to run backup scripts via cron. Any help would be appreciated. Thanks. -Matt -- Stand before it and there is no beginning. Follow it and there is no end. Stay with the ancient Tao, Move with the present.

2 1

Network tuning for working with very old Solaris
by Wade Hampton 28 Mar '10

28 Mar '10

G'day. I am trying to get a very old Solaris 5.7 server to ftp data to my updated CentOS 5.4 server but the Solaris box keeps losing networking after sending some data. I can't ping the Solaris box from any of the servers on my network. Could this be related to a much newer (modern) TCP/IP stack in Linux and TCP options? If so, does anyone have any suggestions for how I can tune the Linux server? I am not as concerned about performance, but just to keep the Solaris box from crashing (and no, I can't upgrade the legacy Solaris server). Thanks, -- Wade Hampton

6 9

printer trouble - missing driver?
by Michael Klinosky 28 Mar '10

28 Mar '10

I can't get my HP DeskJet D2345 (USB) to work on my CentOS 5.3 machine. It'll work on another machine (with Fedora 7). I compared the installation details (in CUPS http://localhost:631) - seems that Cent does not have the driver. On the F7 machine, the device is "D2345 (HP D2300 series)" and the driver is "HP DeskJet D2300 Foomatic/hpijs". When I try to config my Cent machine for this printer, I don't see that driver anywhere in the list. I searched cups.org for D2345 and D2300 - no joy. Can I merely copy some file (the driver?) to the Cent machine? (If so, where would I find it?) Or, how do I get this printer to work with CentOS 5.x? * Details * On the Cent box, I tried using the "HP DeskJet" (generic?) driver. But, when I tell it to print (in an app or even a test page from cups), the computer seems to go thru the motions, but the printer doesn't respond at all (no noises, nothing). Indeed, cups even states that the job is completed. When I plug the printer into the Cent box, the message log reports: Mar 27 16:02:02 sr1220 kernel: usb 3-1: new full speed USB device using uhci_hcd and address 7 Mar 27 16:02:02 sr1220 kernel: usb 3-1: configuration #1 chosen from 1 choice Mar 27 16:02:02 sr1220 kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302 When I tell CUPS to print a test page, several lines are issued in the CUPS log; here are a few: I [27/Mar/2010:16:04:47 -0400] [Job 14] Started filter /usr/lib/cups/filter/pstops (PID 5297) I [27/Mar/2010:16:04:47 -0400] [Job 14] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5298) I [27/Mar/2010:16:04:47 -0400] [Job 14] Started backend /usr/lib/cups/backend/hal (PID 5299) I [27/Mar/2010:16:04:49 -0400] [Job 14] Completed successfully. I [27/Mar/2010:16:04:50 -0400] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5307)

4 7

httpd stopped working under SELinux so I had to turn SELinux off. libxml2.so.2: failed to map segment from shared object: Permission denied
by Aleksey Tsalolikhin 28 Mar '10

28 Mar '10

Hi. CentOS 5.4 64-bit with SELinux, happily running for over a year, suddenly httpd fails to start up, getting an error message like: Starting httpd: Syntax error on line X of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: libxml2.so.2: failed to map segment from shared object: Permission denied I turned off SELinux and was able to start httpd. But what went wrong? And how to fix it and turn SELinux back on? SElinux labels on libxml.so.2.6.26 are OK ( system_u:object_r:lib_t ) and "restorecon -n libxml.so.2.6.26" does not return anything. No recent AVC denied entries in /var/log/audit/audit.log or /var/log/messages. I googled the above error message but all I could find were web pages in Chinese advising to run restorecon on libxml2.so file or turn off SElinux. Any suggestions? Thanks Aleksey

4 4

need help
by cahit Eyigünlü 27 Mar '10

27 Mar '10

Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 Sub net 255.255.255.0 this settings works on fedora 12 perfect but on centos ubuntu freebsd or fedora core it is not working but on all this systems i am able to use nat, i have installed linux again and again thousands of time the given result from centos 5.4 Also as you could see there is no gateway of me on the route table Thanks for your help [root@Lin3 ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:0E:CD:B0 inet addr:188.72.xxx.189 Bcast:188.72.xxx.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe0e:cdb0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1168 errors:0 dropped:0 overruns:0 frame:0 TX packets:63 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97464 (95.1 KiB) TX bytes:11603 (11.3 KiB) Base address:0x2000 Memory:d8940000-d8960000 eth1 Link encap:Ethernet HWaddr 00:0C:29:0E:CD:BA inet addr:192.168.130.133 Bcast:192.168.130.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe0e:cdba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2068 (2.0 KiB) TX bytes:15191 (14.8 KiB) Base address:0x2080 Memory:d8960000-d8980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8281 errors:0 dropped:0 overruns:0 frame:0 TX packets:8281 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4840628 (4.6 MiB) TX bytes:4840628 (4.6 MiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) [root@Lin3 ~]# route -n Kernel IP routing table *Destination Gateway Genmask Flags Metric Ref Use Iface* *192.168.130.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1* *188.72.xxx.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0* [root@Lin3 ~]# service network restart Bridged arabirimi durduruluyor: [ TAMAM ] Nat arabirimi durduruluyor: [ TAMAM ] loopback arayüzü durduruluyor: [ TAMAM ] loopback arayüzü etkinleştiriliyor: [ TAMAM ] *Bridged arayüzü etkinleştiriliyor: RTNETLINK answers: Network is unreachable* [ TAMAM ] Nat arayüzü etkinleştiriliyor: eth1 için IP bilgisi saptanıyor... bitti. [ TAMAM ] [root@Lin3 ~]#

5 23

Re: [CentOS] RAID 5 setup?
by Slack-Moehrle 27 Mar '10

27 Mar '10

>As the disks get bigger, rebuild time also increases and the >performance of the disks don't increase linearly with their storage. >This means that when you are rebuilding a disk, the chances of one of >your other disks failing becomes significantly large. Most suggest >RAID6 these days as a minimum, mirroring and striping appears to be >the most popular. I looked up RAID6 and see the addition or a parity bit. http://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_6 RAID 10 is also something I looked at. Striped, then Mirrored So: 8 x 1.5tb = 12tb RAID 5 = 12tb - 1.5tb for parity data = 10.5tb space available RAID 10 = 4 x 1.5 = 6tb - 1.5tb for parity data = 4.5tb per stripe then mirror it. but with RAID 10, data is safe after many types of failures.

11 20

Multiple FreeNX servers and SSH ports
by Niki Kovacs 27 Mar '10

27 Mar '10

Hi, I've setup a small LAN of two desktops running CentOS 5 in a medical office. Both are connected to the Internet via a small modem/router. Recently I played around with FreeNX on my own desktop, and I'd like to install it on these two computers. On my PC, I just redirected port 22 in the router, so SSH (and thus FreeNX) requests from the outside get redirected to my desktop PC. (And yes, I have a strong password :oD) I'd like to handle the two PCs from the medical office remotely with FreeNX. I figured that the best way to distinguish them would be to assign a different port for SSH to each of them, and then redirect each of the ports respectively. 1) How do I choose different port numbers for SSH ? Any conventions or caveats for this ? 2) How do I configure these different ports ? By that, I mean : how do I tell SSH to use them instead of port 22 ? Cheers, Niki

10 16

"internet connection tester script"
by Jozsef Vadkan 27 Mar '10

27 Mar '10

Why doesn't my "internet-connection" script work? When I plug the ethcable out, it just waits...and waits...and waits... The script: http://pastebin.com/AE9U1qdL

5 6

RAID 5 setup?
by Slack-Moehrle 27 Mar '10

27 Mar '10

Can anyone provide a tutorial or advice on how to configure a software RAID 5 from the command-line (since I did not install Gnome)? I have 8 x 1.5tb Drives. -Jason

11 17

non-root access to log files
by Carlos Santana 27 Mar '10

27 Mar '10

Hi, I would like to give read-only access to mysql and apache-http server log files to a non-root user. I can modify group or other permissions. But is there any other way you can suggest? Can I update it in user's home dir? -- CS.

4 3

awk global replacement only after keyword
by Joseph L. Casale 26 Mar '10

26 Mar '10

Trying to avoid a perl script which wouldn't be hard, but I am looking for an awk one liner that does a replacement, but only after it sees a key word on some line. Anyone know of that's easy to do? Thanks! jlc

7 15

gphoto2 and Nikon Coolpix 990/995
by Boris Epstein 26 Mar '10

26 Mar '10

Hi all, I've got a CentOS 5.4 box and am trying to use it to control either of the two old cameras we've got, one being Nikon Coolpix 990 and the other Nikon Coolpix 995. Accessing either I get the following message: ---------------------------------------------------- *** Error *** An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. ERROR: Could not capture. *** Error (-53: 'Could not claim the USB device') *** ---------------------------------------------------- Any idea what this could be about? By the way, about a year ago I did manage to use a Linux machine to control one of these cameras (the 990, I believe). Thanks in advance. Boris.

2 7

Kickstart 8TB partition limit?
by lhecking＠users.sourceforge.net 26 Mar '10

26 Mar '10

I found a kickstart installation with part pv.100000 --size=1 --grow volgroup vol0 pv.100000 creates a partition with a size of 8TB even though more than 9TB is available. I need to go in manually with gdisk to destroy the partition and recreate it with all available space. No filesystem is specified be cause want to use xfs, which kickstart does not support out of the box. This is under 5.2, but the 5.3/5.4 relnotes do not indicate that this problem has been fixed. Or has it? --------------------------------------------------------------- This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. ---------------------------------------------------------------

3 3

CentOS-announce Digest, Vol 61, Issue 8
by centos-announce-request＠centos.org 26 Mar '10

26 Mar '10

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2010:0163 Moderate CentOS 3 i386 openssl - security update (Tru Huynh) 2. CESA-2010:0163 Moderate CentOS 3 x86_64 openssl - security update (Tru Huynh) 3. CESA-2010:0173 Important CentOS 3 i386 openssl096b - security update (Tru Huynh) 4. CESA-2010:0173 Important CentOS 3 x86_64 openssl096b - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 25 Mar 2010 23:38:39 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2010:0163 Moderate CentOS 3 i386 openssl - security update To: centos-announce(a)centos.org Message-ID: <20100325223839.GA27064(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2010:0163 openssl security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2010-0163.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/openssl-0.9.7a-33.26.i386.rpm updates/i386/RPMS/openssl-0.9.7a-33.26.i686.rpm updates/i386/RPMS/openssl-devel-0.9.7a-33.26.i386.rpm updates/i386/RPMS/openssl-perl-0.9.7a-33.26.i386.rpm source: updates/SRPMS/openssl-0.9.7a-33.26.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update openssl\* Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

centralized user authentication
by Steve Glasser 26 Mar '10

26 Mar '10

> Apart from ipa are there any other good tools out there for centralised user > auth? I am currently testing LDAP (openldap) combined with nss_ldap, configured with authconfig. I would start by testing IPA. Redhat is building out a set of enterprise management tools which include cobbler and spacewalk; I would think IPA will eventually be integrated into their mgt tools. That said, if you want to use Ldap + Kerberos, here are two good howtos: http://aput.net/~jheiss/krbldap/howto.html http://www-theorie.physik.unizh.ch/~dpotter/howto/kerberos The "current" centos rpms for Ldap are quite old; you should consider rebuilding the latest fedora rpms for your system. -- Steve Glasser sgla9347(a)gmail.com

4 3

centralised user authentication
by Tom Brown 26 Mar '10

26 Mar '10

Apart from ipa are there any other good tools out there for centralised user auth? thanks

11 10

Centos4 dead download link on homepage
by Rainer Traut 26 Mar '10

26 Mar '10

Hi, needed to dl. the centos 4 isos... went to www.centos.org, scrolled to CentOS 4 Releases, clicked CentOS 4.8 x86_64. Then this site opened: http://lists.centos.org/pipermail/centos-announce/2009-August/016106.html But the link from centos-announce is dead: http://isoredirect.centos.org/centos/4.8/isos/ Results in 404. Could you please fix it. Rainer

2 2

centos Installation on Multiple machines
by premrajm＠digilink.in 26 Mar '10

26 Mar '10

Hi, I want to install customized centos on multiple systems. Can PXE boot do that ? Apart from this is there any other way of doing image copy of centos OS and installing it on several client machines through network. I used clonezilla, but after image cloning, i will again have to use the clonezilla LIVE CD on client machine to do a image restore. I want to make a clone of centos OS and store it in a server and keeping installing it on multiple machines with same hardware features from network. Is this possible ? Thanks, Premraj M Disclaimer : This message is proprietary to Smartlink Network Systems Limited and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Smartlink Network Systems Ltd. accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus. ______________________________________________________________________________ This email has been scrubbed for your protection by SecureMX. For more information visit http://securemx.in ______________________________________________________________________________

9 8

Rsync: how big is the traffic?
by Fajar Priyanto 26 Mar '10

26 Mar '10

Hi guys, Can pls help me interpret the result of this rsync? I can't tell how much bandwidth the rsync traffic takes. Is it "Total transferred file size" or at the bottom "sent and received bytes"? Thank you. **start** Fri Mar 26 10:01:01 SGT 2010 Number of files: 183773 Number of files transferred: 146 Total file size: 14709183792 bytes Total transferred file size: 406655731 bytes Literal data: 1765746 bytes Matched data: 404889985 bytes File list size: 5024820 File list generation time: 27.024 seconds File list transfer time: 0.000 seconds Total bytes sent: 7050494 Total bytes received: 394481 sent 7050494 bytes received 394481 bytes 23823.92 bytes/sec total size is 14709183792 speedup is 1975.72 **end** Fri Mar 26 10:06:33 SGT 2010

4 3

Allow fedora client to map centos server drive
by Jeff Sadino 26 Mar '10

26 Mar '10

Hello, I am running Fedora 8 on a client machine and I have a CentOS4 "server." How do I mount a server drive on my local machine? I have already looked in hosts.allow, /etc/exports, and tried all sorts of nfs permutations. The server ip is 10.1.1.13 and my local is 10.1.1.117 Thank you VERY much! Jeff

1 0

mysql-python
by Christopher Chan 26 Mar '10

26 Mar '10

Is it me or does the MySQLdb module in Centos not support python's DBAPI 2.0?

3 9

how to automount usb drive
by Bazooka Joe 26 Mar '10

26 Mar '10

I have a server with no desktop - just cli that i need to have a user plug in a usb hd and would like it to automount to a consistent directory so I can schedule a backup. The user can rotate the usb drives and it all just works. Any ideas how automate so that say /media/backup mounts to any usb harddrive and unmounts cleanly? -thx bazooka

3 3

find /etc -size -1G return only empty files
by Ala1n Sp1neu8 25 Mar '10

25 Mar '10

Hello find /etc -size -1G should return all files less than 1Giga byte in /etc, but return a list of empty file (size=0) find /etc -size -2G work fine and return all the files This works the same on my fedora11 and my centos 5 ! Did I miss something or is it a bug ? Regards -- Alain Spineux | aspineux gmail com Your email 100% available | http://www.emailgency.com ntbackup and tar frontend sending mail report | http://www.magikmon.com/mkbackup/

5 7

file/data server running CentOS
by Boris Epstein 25 Mar '10

25 Mar '10

Hi all, I am trying to build a file server providing about 10 TB of effective RAID5/6 storage. Any recommendations as far as hardware, configuration, etc. - preferably based on recent experience - would be most welcome. Thanks in advance. Boris.

2 1

generate certiciate help
by adrian kok 25 Mar '10

25 Mar '10

Hi I try to use "cd /etc/pki/tls/certs; make sendmail.pem" or cd /usr/share/ssl/certs; make sendmail.pem to make certificate but I don't have this path /usr/share/ssl/ I check I have openssl rpm installed How can I do it? Thank you Send instant messages to your online friends http://uk.messenger.yahoo.com

5 4

/mnt/sysimage/dev folder in rescue mode
by Mogens Kjaer 25 Mar '10

25 Mar '10

If I boot C5 from DVD in rescue mode, chroot to /mnt/sysimage, and try to do a grub-install /dev/sda it will fail because the /dev folder is empty (in the chroot environment). Until now I've then created the missing nodes manually, but is there a smarter way of doing this? Some devfs that needs to be mounted on top of /dev? Mogens -- Mogens Kjaer, Carlsberg A/S, Computer Department Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark Phone: +45 33 27 53 25, Mobile: +45 22 12 53 25 Email: mk(a)crc.dk Homepage: http://www.crc.dk

3 4

mkisofs help?
by Slack-Moehrle 24 Mar '10

24 Mar '10

Hi All, I am following: http://www.linuxinsight.com/how-to-flash-motherboard-bios-from-linux-no-dos… to make a bootable CD to flash my bios I get to mkisofs step, but what I get is not what I think I want. I dont understand if I unmount /tmp/floppy how the Mkisofs command of: mkisofs -o bootcd.iso -b FDOEM.144 FDOEM.144 how I get everything in /tmp/floppy Here is what I did: wget http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz gunzip FDOEM.144.gz mkdir /tmp/floppy mount -t vfat -o loop FDOEM.144 /tmp/floppy Copied the flash files to /tmp/floppy umount /tmp/floppy mkisofs -o bootcd.iso -b FDOEM.144 FDOEM.144 Can anyone help? -Jason

2 1

Rebuild - Again!?
by gene.poole＠macys.com 24 Mar '10

24 Mar '10

I putzd around and messed up my primary system. I could get it back with a bunch of work a-rounds but I've decided to do a complete rebuild of it. What I need to run on this machine (besides the CentOS 5.2 OS) is Oracle 11g (requires gnome), VMware Server 2, JBoss 5, plus some other tidbits. Does anyone have or know of a checklist that I can use to make sure I've done everything correctly (as least as far as the OS install and configuration is concerned)? Thanks, Gene Poole

2 1

mounting gfs partition hangs
by sandra-llistes 24 Mar '10

24 Mar '10

Hi, I have configured two machines for testing gfs filesystems. They are attached to a iscsi device and centos versions are: CentOS release 5.4 (Final) Linux node1.fib.upc.es 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686 i386 GNU/Linux The problem is if I try to mount a gfs partition it hangs. [root@node2 ~]# cman_tool status Version: 6.2.0 Config Version: 29 Cluster Name: gfs-test Cluster Id: 25790 Cluster Member: Yes Cluster Generation: 4156 Membership state: Cluster-Member Nodes: 2 Expected votes: 2 Quorum device votes: 2 Total votes: 4 Quorum: 3 Active subsystems: 9 Flags: Ports Bound: 0 Node name: node2.fib.upc.es Node ID: 2 Multicast addresses: 239.192.100.35 Node addresses: 147.83.41.130 [root@node2 ~]# cman_tool nodes Node Sts Inc Joined Name 0 M 0 2010-03-24 14:46:22 /dev/web/web 1 M 4156 2010-03-24 17:08:36 node1.fib.upc.es 2 M 4132 2010-03-24 14:46:09 node2.fib.upc.es [root@node2 ~]# group_tool hangs... [root@node1 ~]# mount -t gfs /dev/home2/home2 /home2 hangs... If I cancel the command I can return to the terminal and I don't see anything in log files. The resource /dev/home2/home2 is accessible by the two nodes and if I try to mount /home2 with lock_nolock there is no problem. cluster.conf is: <?xml version="1.0"?> <cluster alias="gfs-test" config_version="29" name="gfs-test"> <quorumd device="/dev/web/web" interval="1" min_score="1" tko="10" votes="2"> <heuristic interval="10" program="/bin/ping -t1 -c1 147.83.41.1" score="1"/> </quorumd> <fence_daemon post_fail_delay="0" post_join_delay="3"/> <clusternodes> <clusternode name="node1.fib.upc.es" nodeid="1" votes="1"> <fence> <method name="1"> <device name="gfs-test" nodename="node1.fib.upc.es"/> </method> </fence> </clusternode> <clusternode name="node2.fib.upc.es" nodeid="2" votes="1"> <fence> <method name="1"> <device name="gfs-test" nodename="node2.fib.upc.es"/> </method> </fence> </clusternode> </clusternodes> <cman/> <fencedevices> <fencedevice agent="fence_manual" name="gfs-test"/> </fencedevices> <rm> <resources> <clusterfs device="/dev/home2/home2" force_unmount="0" fsid="1605" fstype="gfs" mountpoint="/home2" name="home alumnes" options=""/> </resources> </rm> </cluster> Any help will be welcomed. Thanks, Sandra

2 1

help!
by Roland RoLaNd 24 Mar '10

24 Mar '10

hello, i've just wrote the following : more ./*.csv | grep -i XXX | echo "Dear XXX, This email is for informative purposes. Your total number of hours for the week of `date` is: `cut -d, -f2` hours Kindly note that the average weekly working hours is : 40." | /usr/sbin/sendEmail -t mail(a)domain.com -u Test email- disregard it -f othermail(a)subdomain.com -s smtp.domain.com:25 this looks in a csv file that exists in the same directory for XX and outputs the field right next to it as you notice from : `cut -d, -f2` It's working pretty fine for just one user, but i have to do the same for 432 person. and its obviously not as professional as it should be due to the following reasons: 1. i have to fill the name for each person in place of XXX as well as their MAIL(a)domain.com 2. the date command gives the hour as well which is a bit annoying can anyone guide me on how to proceed? as you notice im a bit of a newbie with bash and im trying my best to improve my one liners/scripts thanks :) _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969

7 7

Patched KVM RPMs (solves 'network shutdown under heavy load')
by Timo Schoeler 24 Mar '10

24 Mar '10

Hi list, due to the necessity of having a patched KVM running, I build some new RPMs. However, only kmod-kvm-83-105.27.x86_64.rpm is important to replace the 'original' one as it's the only package that contains the patch. I didn't rename the packages, though, hopefully in order not to break the upgrade path provided to us. The patch adresses following problem: 'Fix a race condition where qemu finds that there are not enough virtio ring buffers available and the guest make more buffers available before qemu can enable notifications.' [0], the thread startet as 'network shutdown under heavy load' [1]. KVM already contains the fix (since February 19th, IIRC), CentOS' packages doesn't. The RPMs can be found here: http://www.riscworks.net/CentOS/KVM/fix-virt-io-ring-buffer-race/ Best, Timo [0] -- http://marc.info/?l=kvm&m=126564542625725&w=2 [1] -- http://www.mail-archive.com/kvm@vger.kernel.org/msg26033.html

3 10

Publishing a webcam on a web page?
by Stephen Harris 24 Mar '10

24 Mar '10

This talk of cameras has reminded me of a problem I've not yet been able to solve. I have a Logitech Communicate STX ( ID 046d:08ad Logitech, Inc. QuickCam Communicate STX ) This seems to work under v4l on CentOS 5.4. If I load xawtv (from rpmforge) then I can view the image from the camera. But what I'd like to be able to do is have the image appear on a web page (maybe streaming video or maybe multi-part image using old-fashioned server-push web technology from 1995 :-)). Anyone have any recommended tools for this? Thanks! -- rgds Stephen

4 5

Configure Webcam in centos 5.4
by Krishna Chandra Prajapati 23 Mar '10

23 Mar '10

Hi list, I looking for a solution about how to configure webcam in centos 5.4 What are the webcam packages available in centos. Any help is highly appreciated. Regards, Krishna

8 8

kafi25@gmail.com
by kafi Mouhamed Radouane 23 Mar '10

23 Mar '10

kafi25(a)gmail.com

1 0

Connect to MySQL monitor on another host in the LAN ?
by Niki Kovacs 23 Mar '10

23 Mar '10

Hi, I'm running a medical application on a local network, using MySQL as a database. The application can also connect to remote hosts, so the idea is to install it on one machine acting as a "server", and then install it on the other machines on the LAN, but configure these to use the database on the "server". I guess before doing that, I'll better try and get comfortable with connecting remotely using the MySQL monitor itself, that is, without any application or some other frontend. Up until now, I've only configured MySQL in two situations. Either on standalone desktop workstations, or on a web server (LAMP). After installing MySQL (yum install mysql-server), the default setup has a few accounts without any password. First thing I usually do (correct me if this is wrong) is clean up these accounts and only keep one main root@localhost account. Something like this : [root@raymonde:~] # mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2 Server version: 5.0.77 Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> use mysql; Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> select user, host, password from user; +------+-----------+----------+ | user | host | password | +------+-----------+----------+ | root | localhost | | | root | raymonde | | | root | 127.0.0.1 | | | | localhost | | | | raymonde | | +------+-----------+----------+ 5 rows in set (0.00 sec) mysql> delete from user where user = ''; Query OK, 2 rows affected (0.01 sec) mysql> delete from user where host = 'raymonde'; Query OK, 1 row affected (0.00 sec) mysql> delete from user where host = '127.0.0.1'; Query OK, 1 row affected (0.01 sec) mysql> select user, host, password from user; +------+-----------+----------+ | user | host | password | +------+-----------+----------+ | root | localhost | | +------+-----------+----------+ 1 row in set (0.00 sec) mysql> set password for root@localhost = password('********'); Query OK, 0 rows affected (0.00 sec) mysql> select user, host, password from user; +------+-----------+------------------+ | user | host | password | +------+-----------+------------------+ | root | localhost | 2d97271980b60f82 | +------+-----------+------------------+ 1 row in set (0.00 sec) mysql> quit; So much for the standalone setup. Now what would be an orthodox (and somewhat secure) configuration to be able to connect to this MySQL server on 'raymonde' from another machine in the LAN ? Do I have to (re)create a root@raymonde MySQL account and eventually give it the same password than root@localhost ? Cheers, Niki

3 2

fsck problems
by sync 23 Mar '10

23 Mar '10

hi , guys: when i reboot the server today ,the screen displays this ; --------------------------------------------------------------------------------------- Setting hostname xxx [OK] Your system appears to have shut down uncleanly Press Y within 1 seconds to force file system integrity check... Checking root filesystem /dev/VolGroup00/LogVol 00: UNEXPECTED INCONSISTENCY: RUN fsck MANUALLY. (i.e., without -a or -p options) [FAILED] *** An error occured during the file system check. *** Droping you to a shell; the system will reboot *** when you leave the shell. Give root password for maintenance (or type Control-D to continue) ---------------------------------------------------------------------------------------- is it the disk error ? What should i do to repair the disk ? Thanks in advance ......

7 13

Ruby-1.9.1+ rpm for CentOS-5
by James B. Byrne 23 Mar '10

23 Mar '10

Does anyone have the url of a repository that provides Ruby-1.9.1+ for CentOS-5 and which they consider a trustworthy and reliable source? I really do not what to have to build this software if I can avoid it. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Upgrading Python with Yum
by Susan Day 23 Mar '10

23 Mar '10

Hi; I have an old version of Python (2.4.3) and I'm trying to upgrade (to 2.6); however, when I try yum upgrade python it tells me that it's already got the latest and greatest...presumably of 2.4.3. I've tried yum list python and it only gives me the 2.4.3. Are there no others? Do I have to build from a tarball? I'm surprised I don't find a version of Python 3 either. In what folder are the rpms kept? TIA, Susan

5 8

gimp - aalib
by Frank Cox 23 Mar '10

23 Mar '10

I want to use the aalib plugin to save some graphics out of gimp. But... I can't find it as an option in Gimp. I have both gimp and aalib installed on this computer. Is there some additional piece that I also need to install? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

how to push the bounds and get newer packages for centos 5.4?
by Robert P. J. Day 22 Mar '10

22 Mar '10

i've just started looking after a (virtual) centos 5.4 server that's hosted at rackspace and, unsurprisingly, it was set up with all the standard defaults. part of the work i'll be doing involves php and, as i read it, the standard php version with centos 5.4 is php-5.1. if i *wanted* to move up to a more recent version (say, php-5.3), obviously, i'd need to go outside the limits of the standard centos yum repos. in my travels, i ran across this site: http://blog.famillecollet.com/pages/Config-en with the corresponding instructions: wget http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-3.noarch.r… wget http://rpms.famillecollet.com/enterprise/remi-release-5.rpm rpm -Uvh remi-release-5*.rpm epel-release-5*.rpm i'm suitably leery of 3rd-party repos but i recall that someone else (on this list?) recommended that site. and i can see that it has an x86_64 version of php-5.3 ready to go for centos 5.4: http://rpms.famillecollet.com/enterprise/5/remi/x86_64/repoview/php.html what are the recommendations for well-respected 3rd-party repos for centos 5.4 if i want to get newer packages? the centos 5.4 system in question is purely an internal development system so i have the freedom to customize it to some extent if newer packages are called for. thanks. rday -- ======================================================================== Robert P. J. Day Waterloo, Ontario, CANADA Linux Consulting, Training and Kernel Pedantry. Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday ========================================================================

9 10

Mounting a Mac OS Extended (Journaled) Hard Drive
by Keith Beeby 22 Mar '10

22 Mar '10

Hi, I need to migrate about 8Tb of data from a Mac Fibre Channel RAID to by LVM Ext3 Linux Fibre Channel RAID. For speed I planned to connect both RAID's to my CentOS Server and copy the data directly. The Mac volume is formatted as Mac OS Extended (Journaled) it seems that CentOS 5.4 supports reading HFS volumes but not HFSPlus volumes. Is there a way of getting this volume to mount so I can copy of the data? I see Fedora has HFSPlus support Thanks Keith

5 8

VSFTPD accepting same user/session from different IP addresses
by Dirk H. Schulz 22 Mar '10

22 Mar '10

Hi folks, I have found the following in my logs: Wed Mar 10 15:52:33 2010 [pid 15232] [uploaduser] OK MKDIR: Client "195.200.70.*40*", "/04 LV gelieferte Daten 04_2010/04 LV Seiten/Jungz?chter" Wed Mar 10 15:52:33 2010 [pid 15231] [uploaduser] FAIL MKDIR: Client "195.200.70.*41*", "/04 LV gelieferte Daten 04_2010/04 LV Seiten/Jungz?chter" Wed Mar 10 15:52:36 2010 [pid 15232] [uploaduser] OK UPLOAD: Client "195.200.70.*40*", "/04 LV gelieferte Daten 04_2010/04 LV Seiten/Jungz?chter/Kooperationsseminar.doc", 23552 bytes, 13.89Kbyte/sec Wed Mar 10 15:52:37 2010 [pid 15231] [uploaduser] OK UPLOAD: Client "195.200.70.*41*", "/04 LV gelieferte Daten 04_2010/04 LV Seiten/Jungz?chter/Veranstaltungen der Jungz?chter im Jahr 2010.doc", 23552 bytes, 9.07Kbyte/sec Wed Mar 10 15:52:38 2010 [pid 15232] [uploaduser] OK UPLOAD: Client "195.200.70.*40*", "/04 LV gelieferte Daten 04_2010/04 LV Seiten/Jungz?chter/Foto Kooperationsseminar von laura weber.JPG", 13445 bytes, 9.90Kbyte/sec What I am concerned about is the fact that the client sends out using various gateways at once. Is there some configuration item in VSFTPD which can prevent this and reject packets from the additional ip addresses? Any hint or help is appreciated. Dirk

2 3

Re: [CentOS] Looking for experiences with filesystem choices....
by Tom Bishop 22 Mar '10

22 Mar '10

So I tried XFS last night and it cut my copy times down substantially, so I need someone to verify that XFS in centos 5.4 has barriers enabled by default, I am not using LVM just the old fashion partitions and mount points. It appears that reading from the centos wiki that xfs is enabled in the kernel due to upstream vendor doing so for the first timeI loaded up xfsprogs and xfsdump but it was not clear about the barrier details.... Thanks...in advance. :) On Mon, Mar 22, 2010 at 9:26 AM, Brent L. Bates <blbates(a)vigyan.com> wrote: > If you want dependability, reliability, robustness, and a fast file > system the only choice is XFS. It is the ONLY file system I will > use/trust. > I've been using it since it first came out on SGI's under IRIX and have > been > using it under Linux for a number of years. It survives system crashes and > disk hardware problems and just keeps on going. You will not find a better > file system out there. > > -- > > Brent L. Bates (UNIX Sys. Admin.) > M.S. 912 Phone:(757) 865-1400, x204 > NASA Langley Research Center FAX:(757) 865-8177 > Hampton, Virginia 23681-0001 > Email: B.L.BATES(a)larc.nasa.gov http://www.vigyan.com/~blbates/<http://www.vigyan.com/%7Eblbates/> > >

1 0

sendmail sending out on port 587
by Gregory P. Ennis 22 Mar '10

22 Mar '10

Dear List, I recently spent some time out of the USA, and found myself in a hotel that blocked port 25 which prevented my laptop's ability to connect to my office mail server. I did a scan on the internet and made the observation that this was a common problem. I had port 22 available so I was able to get my office server set up to accept mail on 25 and 587 without difficulty. The command "telnet mail.server.com 587" to my office mail server connects without difficulty. However, I have not been able to get sendmail on my laptop to connect to sendmail on my mail server at home using port 587. I have added the following to sendmail.mc on my laptop without success : define(`RELAY_MAILER_ARGS', `TCP $h 587') define(`ESMTP_MAILER_ARGS', `TCP $h 587') I finally made it back home, but have decided to change my configuration to use 587 by default so that this problem will be avoided, but I have been unable to get my laptop to connect. Anyone having ideas would be appreciated. Greg Ennis

7 14

how does the bootup screen move the cursor around?
by Frank Cox 22 Mar '10

22 Mar '10

While rebooting my computer after installing the new kernel a few minutes ago, I got to wondering about how the initial bootup screen (after grub, before rhgb) is constructed. The "Loading kernel blah blah blah" lines start at the top of the screen and proceed to scroll down as one would expect. But "kernel alive" shows up at the bottom of the screen and then more write-up is printed above it. My question is, how does that happen? Does it write its own esc codes directly to the screen? If so, how does it know what terminal we're using and, therefore, what esc codes to send? Further into the boot sequence something like ncurses could do the heavy lifting, but I don't think we're that far along yet. -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss