- Discuss - lists.centos.org

Re: [CentOS] [CentOS-announce] CentOS 5 i386 - The CentOS-5.3 i386 Live CD is released
by Radu-Cristian FOTESCU 27 May '09

27 May '09

> Yes. We had some issues with our mirror network which we > wanted to resolve before announcing the Live CD, so that > the CD would be available on all mirror carrying CD isos. Ouch, didn't know that there were mirroring problems. > > Also, how come it only includes FF 3.0.6? This is > terribly weird IMHO. > > It went through QA before the release announcement, which > also took some time. OK. However... this is still ridiculous, given the dates when CentOS has released FF updated packages: firefox-3.0.6 = 04-Feb-2009 firefox-3.0.7 = 01-Apr-2009 firefox-3.0.9 = 23-Apr-2009 firefox-3.0.10 = 28-Apr-2009 5.3 LiveCD = 19-May-2009 Just updating 1 (one) package and regenerate the CD... how much would it have taken to test the result? Note that the updated package was part of CentOS 5.3 since April 28 already. (Sigh.) All right, nothing would change now anyway. But it's still ridiculous to ship a FF issued in February 4! Regards, R-C __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/

2 1

Re: [CentOS] [CentOS-announce] CentOS 5 i386 - The CentOS-5.3 i386 Live CD is released
by Radu-Cristian FOTESCU 27 May '09

27 May '09

> Like every thing else we do - its not released till > its announced. And till its announced, it can change > - be removed or modified or even pulled. Thanks. It makes sense. It's just... the regular 5.3 was *not* posted (as ISO images) one week before the announcement! And it was frustrating... http://beranger.org/v3/wordpress/wp-content/uploads/2009/05/useless_chart_r… Best regards, R-C __________________________________________________________________ The new Internet Explorer® 8 - Faster, safer, easier. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/

1 0

[CentOS-announce] CentOS 5 i386 - The CentOS-5.3 i386 Live CD is released
by Radu-Cristian FOTESCU 27 May '09

27 May '09

Umm... is there any rational reason to only announce the CentOS-5.3 Live CD on May 27, when it was available since May 19, and Patrice has updated the Release Notes on the same May 19? The CD date is indeed 19-May-2009 02:50 and I've found it on May 21 on all the mirrors I've checked. I was persuaded that the only 5.3 LiveCD available was from ScientificLinux, and I've checked with CentOS just be reflex. To my surprise, 5.3 LiveCD was available, but not announced! Also, how come it only includes FF 3.0.6? This is terribly weird IMHO. Best regards, R-C __________________________________________________________________ Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now http://ca.toolbar.yahoo.com.

3 2

[OT] DR
by Scott McClanahan 26 May '09

26 May '09

I remember a thread many months ago where someone asked about a disaster recovery template or guide and several people on this list linked some really good content. I can't seem to find that thread now and neglected to make note of the links but I do recall that some of the guides came from a site that had many other "industry best practices" type guides. Any insight here or do you need more info? Thanks.

3 3

Re: [CentOS] Preventing hour-long fsck on ext3-filesystem
by Bernhard Gschaider 26 May '09

26 May '09

Thank you all for your quick answers (you guys must have started typing BEFORE I hit the Send-button). The general consensus seems to be "If you can start anew: use XFS". This leaves one question: as the XFS is not included in the standard-kernel which option offers the "smoothest sailing" (especially during kernel-updates): - kernel from centosplus - kmod-xfs from centosplus - kmod-xfs from extras Bernhard >>>>> On Thu, 14 May 2009 11:57:49 -0400 >>>>> "BLB" == Brent L Bates <blbates(a)vigyan.com> wrote: BLB> I strongly recommend XFS over ext[23] ANY day. XFS is BLB> faster, more robust, and more dependable than ext. I've used BLB> it for years and it is rock solid. I've had it work through BLB> failing disk drives and number system crashes (caused by BLB> faulty memory). It takes a licking and keeps on ticking. BLB> :-) No need to `fsck' the drive. If there are any file BLB> system problems, one can run xfs_check with a live system. BLB> It isn't recommended as it can give false positives for a BLB> live running file system, but it can help if needed. BLB> xfs_repair has to be run on an unmounted file system, BLB> however, I've almost never needed to use xfs_check or BLB> xfs_repair. XFS has over a decade and pentabytes of use BLB> behind it. I wouldn't use any other file system. BLB> -- BLB> Brent L. Bates (UNIX Sys. Admin.) M.S. 912 Phone:(757) BLB> 865-1400, x204 NASA Langley Research Center FAX:(757) BLB> 865-8177 Hampton, Virginia 23681-0001 Email: BLB> B.L.BATES(a)larc.nasa.gov http://www.vigyan.com/~blbates/ -- --------------------------------------------------------------------------- DI Bernhard F.W. Gschaider --------------------------------------------------------------------------- EMail: Bernhard.Gschaider(a)ice-sf.at WWW : www.ice-sf.at Jabber : bgschaid(a)jabber.org Tel: +43(3842)98282-42 Fax: +43(3842)98282-02 ---------------------------------------------------------------------------

8 16

mock rebuild of rsyslog dies
by Kanwar Ranbir Sandhu 26 May '09

26 May '09

Hi All, I'm not sure where I should ask this, so I'll try here and the Fedora list. I'm using mock-0.6.13-1.el5_2.3 on a CentOS 5 box to rebuild i386 and x86_64 versions of rsyslog-3.21.10-2.fc10.src.rpm. But, the mock build always dies (for both archs) with the following error: No Package Found for librelp-devel Cannot find build req librelp-devel. Exiting. I can install that library on CentOS 5 outside of mock. I can even rebuild the SRPM outside of mock. So, I don't think there is a problem with the SRPM, but maybe there is. I don't know. :( Does anyone know why librelp-devel wouldn't be found? Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.27.21-170.2.56.fc10.x86_64 x86_64 GNU/Linux 15:22:34 up 2 days, 16:33, 4 users, load average: 1.11, 1.06, 0.67

1 1

CentOS-announce Digest, Vol 51, Issue 12
by centos-announce-request＠centos.org 26 May '09

26 May '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0329 Important CentOS 4 ia64 freetype - security update (Pasi Pirhonen) 2. CESA-2009:1060 Important CentOS 4 ia64 pidgin - security update (Pasi Pirhonen) 3. CESA-2009:0258 Moderate CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) 4. CESA-2009:0329 Important CentOS 4 s390(x) freetype - security update (Pasi Pirhonen) 5. CESA-2009:0258 Moderate CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 May 2009 19:35:02 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0329 Important CentOS 4 ia64 freetype - security update To: centos-announce(a)centos.org Message-ID: <20090525163502.GQ18516(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0329 https://rhn.redhat.com/errata/RHSA-2009-0329.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/freetype-2.1.9-10.el4.7.ia64.rpm updates/ia64/RPMS/freetype-demos-2.1.9-10.el4.7.ia64.rpm updates/ia64/RPMS/freetype-devel-2.1.9-10.el4.7.ia64.rpm updates/ia64/RPMS/freetype-utils-2.1.9-10.el4.7.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Photo browser
by centos＠911networks.com 26 May '09

26 May '09

Hi, Can somebody recommend a photo browser. It needs to support CR2, NEF, PEF and DNG formats. I'm looking for something like Infranview, but for Linux. -- Thanks

6 7

Re: [CentOS] Auto-installing security updates?
by Robert Heller 26 May '09

26 May '09

At Tue, 26 May 2009 12:05:15 +0200 CentOS mailing list <centos(a)centos.org> wrote: > > Content-Language: sv > > > ---Executing: recode > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of Robert Heller > >Sent: Monday, May 25, 2009 4:42 PM > >To: CentOS mailing list > >Cc: 'CentOS mailing list' > >Subject: Re: [CentOS] Auto-installing security updates? > > > >> The firmware you mention, is that used with dkms or something like that? > > > >I'm not sure what the firmware does exactly. Look in your > >/var/log/messages file. There will be some mention of 'failed to load > >firmware' associated with the driver load. You need to have a > >partitular file living in /lib/firmware/ -- the name is wired into the > >driver. The SMC Ez Connect card needed something called isl3890. I > >don't remember where I got this. My Intel card needed ipw2100-1.3*, > >this I got off a site after googling for 'firmware ipw2100' (or > >something like that). Getting the Intel was easy -- there is a web > >site with all of the info needed. Getting the prism firware was a bit > >of a hassle. You might have to unpack a file from the CD that came > >with the WiFi card -- this means you need some Windows tool to > >unpack/install it someplace and then copy the magic file from where the > >Windows installer/unpacker puts it to your Linux box and make sure it > >has the proper name. It is important to get the correct version for > >your card. > > So Intel seems to be the way to go if you want to make wifi relatively > painless to install and get working on linux? YES!!! The only modern card with a fully open-source driver. > -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

1 0

resolving names it is really slow slow with CentOS5.x using named
by carlopmart 26 May '09

26 May '09

Hi all, I have a problem using named with different CentOS5 servers (2 servers): all they are really slow to resolv any internet address and most of time fails to resolv. This situation differs if I use "forwarders" servers like opendns: resolving names it is really really quickly. And I don't understand why. On the other hand I have tested three DNS servers using Windows 2003, Windows 2008 and Ubuntu hardy and these problems doesn't occurs (I don't need to configure forwarders on any of them): all resolves any name and really fast. IPv6 is disabled on both CentOS servers. Somebody knows why these dns servers are slow?? Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

10 24

Re: [CentOS] Auto-installing security updates?
by JohnS 26 May '09

26 May '09

On Mon, 2009-05-25 at 15:02 +0200, Sorin Srbu wrote: > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of William L. Maltby > >Sent: Monday, May 25, 2009 2:24 PM > >To: CentOS mailing list > >Subject: Re: [CentOS] Auto-installing security updates? > > > >> >Probably not the best distro for Laptops, > >> >but many people on this list are using CentOS on their laptops. > >> > >> So what's considered to be the "best" choice for laptops? I understand > >> mileage may vary and so on, but I think there might maybe be a general > >> consensus at least? > > ^^^^^^^^^ > > > >Not likely on this list. More likely, a "preponderance", maybe even a > >"majority", but I wouldn't be surprised if even those aren't achieved. > >BTW, "general" is redundant with "consensus". > > I'm sorry. I'm not a native English speaker or writer. > > Ok, so what would you guys suggest using on a laptop, if CentOS was not an > option? I read in an earlier post where somebody suggested chosing distro > based on the hardware. Suppose this hardware is a Dell Latitude a few years > old, with no built-in wifi, but rather either a Dlink DFE-680TXD or a 3com > 3CRWE154G72. --- What do you mean a few years old? I have 2 Dell Latitude LS's that work work fine out of the box with CentOS 4.7 and 5.3. They barely meet the i686 cutoff date. JohnStanley

3 3

Re: [CentOS] Auto-installing security updates?
by Robert Heller 26 May '09

26 May '09

At Mon, 25 May 2009 15:05:25 +0200 CentOS mailing list <centos(a)centos.org> wrote: > > Content-language: sv > > > ---Executing: recode > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of Robert Heller > >Sent: Monday, May 25, 2009 2:52 PM > >To: CentOS mailing list > >Cc: 'CentOS mailing list' > >Subject: Re: [CentOS] Auto-installing security updates? > > > >The *Intel* WiFi-NIC (Intel Corporation PRO/Wireless LAN 2100 3B Mini > >PCI Adapter) on my IBM Thinkpad X31 worked mostly out-of-the-box. I > >just needed to download the firmware and I was up. So did the SMC Ez > >Connect PCMCIA card I used on my previos laptop (I think it was a > >prism54 flavor), also once I snarfed the proper firmware for it. > > I think the prism-variety you mention is what's used with the wifi-NIC on a > desktop I have, that I wanted to run MythTV on but haven't had any luck with > yet. > > The firmware you mention, is that used with dkms or something like that? I'm not sure what the firmware does exactly. Look in your /var/log/messages file. There will be some mention of 'failed to load firmware' associated with the driver load. You need to have a partitular file living in /lib/firmware/ -- the name is wired into the driver. The SMC Ez Connect card needed something called isl3890. I don't remember where I got this. My Intel card needed ipw2100-1.3*, this I got off a site after googling for 'firmware ipw2100' (or something like that). Getting the Intel was easy -- there is a web site with all of the info needed. Getting the prism firware was a bit of a hassle. You might have to unpack a file from the CD that came with the WiFi card -- this means you need some Windows tool to unpack/install it someplace and then copy the magic file from where the Windows installer/unpacker puts it to your Linux box and make sure it has the proper name. It is important to get the correct version for your card. -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

2 1

Re: [CentOS] Auto-installing security updates?
by Rob Kampen 26 May '09

26 May '09

Sorin Srbu wrote: >> -----Original Message----- >> From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On >> > Behalf > >> Of William L. Maltby >> Sent: Monday, May 25, 2009 2:24 PM >> To: CentOS mailing list >> Subject: Re: [CentOS] Auto-installing security updates? >> >> >>>> Probably not the best distro for Laptops, >>>> but many people on this list are using CentOS on their laptops. >>>> >>> So what's considered to be the "best" choice for laptops? I understand >>> mileage may vary and so on, but I think there might maybe be a general >>> consensus at least? >>> >> ^^^^^^^^^ >> >> Not likely on this list. More likely, a "preponderance", maybe even a >> "majority", but I wouldn't be surprised if even those aren't achieved. >> BTW, "general" is redundant with "consensus". >> > > I'm sorry. I'm not a native English speaker or writer. > > Ok, so what would you guys suggest using on a laptop, if CentOS was not an > option? I read in an earlier post where somebody suggested chosing distro > based on the hardware. Suppose this hardware is a Dell Latitude a few years > old, with no built-in wifi, but rather either a Dlink DFE-680TXD or a 3com > 3CRWE154G72. > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > Sorin, I have installed and used CentOS on laptops just fine. The last two even had the internal wireless work without effort. You may need to do some work to get the wireless functioning okay - NetworkManager seems to help if you use both wired and wireless. For me the advantage of using CentOS is that all machines have the same stuff in the same place, so I do not waste time looking for files and trying to work out how Ubuntu or whatever distro does something. Also, I keep a local mirror of updates so I only need to use bandwidth once to get my updates. I used to use Fedora, but got annoyed at having to do complete updates every 12 ~ 18 months. I'd just try it and see, one can always grab another distro if CentOS is really too difficult to get functioning. Rob

2 1

Re: [CentOS] Intel Atom systems?
by J.Witvliet＠MINDEF.NL 26 May '09

26 May '09

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Angus MacGyver Sent: Monday, May 25, 2009 5:51 PM To: CentOS mailing list Subject: Re: [CentOS] Intel Atom systems? On Mon, 2009-05-25 at 16:22 +0200, Peter Hopfgartner wrote: > >> Any comments on CentOS 5 on Intel Atom CPUs? > >> > >> I need to build a couple of inexpensive systems that will be used > >> primarily as gateway/firewall systems with OpenVPN, and need > >> recommendations in reliable hardware platforms. These will need > >> two NICs. > >> > > > > Go with Soekris, they are built for that purpose. You can even get > > an SSL accelerator card for them. Mine has a ~500Mhz AMD Geode CPU, > > 512MB ram, I added a 1GB CF card, it has 4x100Mbit NICs, it has a > > slot for a PCI device, I put a bracket with another serial port on > > there to hook to a UPS, has a USB port, and a serial port for > > console access, draws a tiny amount of power. > > > > I don't consider linux a good platform for firewall or VPN devices > > myself, I use OpenBSD, with pf. I have an OpenVPN from my soekris > > box at home to my co-located server(runs Debian), have had it hooked > > up for almost a year now, works great. I don't need the SSL > > acceleration card as my commit rate at the colo is only 1Mbit, so I > > don't want to push a lot of traffic. > > > > http://www.soekris.com/net5501.htm > > > > These things are designed from the ground up to be firewall/VPN > > appliances(low end mind you, your not gonna be pushing gigabits of > > traffic through them). The CPU on mine doesn't even have a heat > > sink. > > > > nate WRAP's are old, but I've still got one powering my firewall/VPN device, years later(WAN/LAN and DMZ), and the ALIX is a drop in replacement, and I have one of those in a NAS. Granted, you ain't gonna get multi GB throughput, same as soekris, but by goodness they are stable and reliable, zero moving parts, and as for ALIX/WRAP series, pretty neglible power requirements. Also agree with Nate, I'd choose a version of BSD for a firewall/gateway device over Linux, either FreeBSD or OpenBSD. Something new (shipping starts in june) Have a look at: http://www.fit-pc.net/fitpc-2-p-2.html or http://www.fit-pc.info/downloads/handleidingen/fit_pc_2_eng.pdf Intel Atom Z530 1,6 GHz 1 GB DDR2 onboard 1* 1000 BaseT Ethernet, RJ45 OPTION: 802,11g 6* USB 2.0 high speed ports (for additional ethernet ports) Mini SD port Either diskless or with 160GB sata Size: 115 x 101 x 27 As it new hardware, chances are minute that any flavour of *BSD will run on it for the next couple of years. You can get it with linux pre-installed. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

1 0

{SOLVED} Re: OT: SMART warning on hard drive, same warning for 2 1 /2 years
by Lanny Marcus 26 May '09

26 May '09

On Sun, May 24, 2009 at 5:10 PM, Lanny Marcus <lmmailinglists(a)gmail.com> wrote: > My wife's box has a very intermittent problem, when booting from the > Maxtor IDE hard drive. This has been going on for about 2 1/2 > years.... The box is a Compaq EVO D300v for the Enterprise. When it > boots, there is a SMART advisory from the BIOS that says failure is > immenient. Occasionally, it will not boot, because the BIOS does not > see the hard drive. I replaced the EIDE cable, but the problem of After I posted this yesterday, I turned my wife loose on her computer and it choked. Possibly a coincidence, after receiving SMART warnings for a couple of years, and it was ready to die. Thought I had 2 used hard drives, in perfect condition, but the first one I installed turned out to be DOA and now the other one is installed.. :-) Thanks to everyone who replied. As Mark (MHR) wrote, I too was skeptical of the SMART warnings from the BIOS and when I checked on the Compaq Support site, a couple of years ago, I was told the Compaq BIOS is very sensitive and there are a lot of false warnings. However, after checking the bad hard drive with smartctl yesterday, I am a believer in SMART warnings....

2 1

gethostbyname clarification
by Joseph L. Casale 25 May '09

25 May '09

I have an issue, although it's a result of sketchy code in the sip implementation in Asterisk that's been around forever, I am sure I am going to have to fix it some other way as many people have waited with no fix yet from Digium. If a name resolution fails for a remote sip peer, the entire stack tanks and local sip phones don't work either. We have several sip trunks and an analog trunk for redundancy when the SIP providers are down. Problem is if the net connection is down *nothing* works. Most people suggest to run your own caching nameserver which we do. We had long outage and sure enough eventually all the sip phones couldn't connect. I fear in hard coding the remote sip peers in the hosts file incase that changes. The server was also restarted which I believe clears out the name server cache? Is there some way I can configure nsswitch.conf from "hosts: files dns" to something like "hosts: files dns file2" so if those ip's ever changed I would have time to figure it out and update the file unless another outage occurred at the same time :)? Anyone got a better idea how to solve this dilemma? Thanks! jlc

1 0

lacie drive and CentOS 5.3 question...
by Ray Van Dolson 25 May '09

25 May '09

I'm adding a couple lacie external USB drives to my CentOS 5.3 system and running into a few issues... when I connect them, I see the following in dmesg: usb 1-1: new high speed USB device using ehci_hcd and address 11 usb 1-1: configuration #1 chosen from 1 choice And that's it. No device assignment information, the usb-storage module does not appear to be loaded and I am unable to access the drive. I do see the following in lsusb: Bus 001 Device 011: ID 0451:6250 Texas Instruments, Inc. I'm assuming the kernel or udev doesn't know what to do with the given device ID and isn't correctly mapping it to the usb-storage module (I have manually loaded usb-storage with modprobe usb-storage prior to attaching the device). I found a post describing how to manually map a vendor id / device id to usb-storage, but it has to do with the old hotplug system from CentOS 4. Can anyone advise me on how I can tell my system the above device is a mass storage device? Do I need to write some udev rules? These drives work fine (automatically) on a Fedora 10 machine. Also, I am using the "plus" kernel on my CentOS machine. Thanks, Ray

3 10

System hang during shutdown (halt)
by Camron W. Fox 25 May '09

25 May '09

Alle, I'm running V5.3 (newly installed) on an FJ E8020 laptop. The problem I have is when shutting down (*not* rebooting). NetworkManager fails to stop and after (during?) the postfix shutdown, the system seems to hang. I cannot access via another screen or remotely. I can't find any clues in the log files. I could use some suggestions on troubleshooting. Here are the active services: [cwfox@oprichnik ~]$ sudo /sbin/chkconfig --list | grep 3:on | sort acpid 0:off 1:off 2:off 3:on 4:on 5:on 6:off anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off dkms_autoinstaller 0:off 1:off 2:off 3:on 4:on 5:on 6:off haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off hplip 0:off 1:off 2:on 3:on 4:on 5:on 6:off kudzu 0:off 1:off 2:off 3:on 4:on 5:on 6:off lm_sensors 0:off 1:off 2:on 3:on 4:on 5:on 6:off lvm2-monitor 0:off 1:on 2:on 3:on 4:on 5:on 6:off messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off ntpd 0:off 1:off 2:off 3:on 4:off 5:on 6:off pcscd 0:off 1:off 2:on 3:on 4:on 5:on 6:off postfix 0:off 1:off 2:on 3:on 4:on 5:on 6:off readahead_early 0:off 1:off 2:on 3:on 4:on 5:on 6:off smartd 0:off 1:off 2:on 3:on 4:on 5:on 6:off sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off syslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off sysstat 0:off 1:off 2:on 3:on 4:off 5:on 6:off uuidd 0:off 1:off 2:on 3:on 4:on 5:on 6:off xfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off [cwfox@oprichnik ~]$ Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu Management Services of America, Inc. E-mail: cwfox(a)us.fujitsu.com

2 2

rsyslog expression based filters
by Kanwar Ranbir Sandhu 25 May '09

25 May '09

Hello All, Does the rsyslog version in CentOS 5 support expression based filters? I'm asking because a filter I believe should be working, isn't and I cannot figure out why. I'm trying to get the following expression working (might wrap): if $source == 'astappsrv2' and $programname == 'asterisk' then /var/log/asterisk/astappsrv2.log Every time I restart rsyslog, I get this error (slightly edited to make it fit): rsyslogd:unknown priority name "log" rsyslogd:the last error occured in /etc/rsyslog.conf, line 16 rsyslogd:warning: selector line without actions will be discarded The line rsyslog is having problems with is the expression based filter. astappsrv2 is the log client, and it's successfully sending it's logs to the remote log host (the one on which I'm having problems with the expression filter). I know the logs are coming in because I've setup property based filters that all work just fine. I can take this to the rsyslog list if need be. I wanted to try here first. Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.27.21-170.2.56.fc10.x86_64 x86_64 GNU/Linux 13:46:04 up 1 day, 14:56, 4 users, load average: 1.03, 0.41, 0.14

1 1

CentOS-announce Digest, Vol 51, Issue 11
by centos-announce-request＠centos.org 25 May '09

25 May '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0258 Moderate CentOS 4 i386 thunderbird - security update (Tru Huynh) 2. CESA-2009:0258 Moderate CentOS 4 x86_64 thunderbird - security update (Tru Huynh) 3. CESA-2009:0329 Important CentOS 3 ia64 freetype - security update (Pasi Pirhonen) 4. CESA-2009:1059 Important CentOS 3 ia64 pidgin - security update (Pasi Pirhonen) 5. CESA-2009:0329 Important CentOS 3 s390(x) freetype - security update (Pasi Pirhonen) 6. CESA-2009:1059 Important CentOS 3 s390(x) pidgin - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 May 2009 09:09:51 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2009:0258 Moderate CentOS 4 i386 thunderbird - security update To: centos-announce(a)centos.org Message-ID: <20090525070951.GA29910(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2009:0258 thunderbird security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2009-0258.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/thunderbird-1.5.0.12-19.el4.centos.i386.rpm source: updates/SRPMS/thunderbird-1.5.0.12-19.el4.centos.src.rpm You may update your CentOS-4 i386 installations by running the command: yum update thunderbird Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

OBM groupware on centos
by DNK 25 May '09

25 May '09

Have any of you tried out the OBM groupware stuff on centos? They have RHEL5 rpm's. http://obm.org/doku.php?id=start Also curious how it is as a groupware/exchange alternative.... d

1 0

Re: [CentOS] Gnome terminal oddity
by James B. Byrne 25 May '09

25 May '09

On: Fri, 22 May 2009 16:58:26 +0000 (UTC), Beartooth <Beartooth(a)comcast.net> wrote: > > On Fri, 22 May 2009 12:49:43 -0400, James B. Byrne wrote: > >> I have the following gnome terminal profile settings: >> >> Backspace = ASCII DEL >> Delete Key = Escape Sequence > [....] >> I am fairly confident that the delete key worked in the same >> fashion for my usual user id up until quite recently. Does >> anyone know of why or how this behaviour could differ between >> two separate users in the same terminal window? > > I have my gnome-terminal (under Fedora, not CentOS) set to > Control-H and Escape Sequence; that works fine for all users here, > and does what I'm guessing you want. > That setting does not change the observed behaviour. If I su -l then the Escape Sequence DEL removes the character under the cursor and left shifts the line. If I am not the superuser, even in exactly the same gnome terminal window instance, then the DEL has no evident effect. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Re: [CentOS] Auto-installing security updates?
by Robert Heller 25 May '09

25 May '09

At Mon, 25 May 2009 15:02:28 +0200 CentOS mailing list <centos(a)centos.org> wrote: > > Content-language: sv > > > ---Executing: recode > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of William L. Maltby > >Sent: Monday, May 25, 2009 2:24 PM > >To: CentOS mailing list > >Subject: Re: [CentOS] Auto-installing security updates? > > > >> >Probably not the best distro for Laptops, > >> >but many people on this list are using CentOS on their laptops. > >> > >> So what's considered to be the "best" choice for laptops? I understand > >> mileage may vary and so on, but I think there might maybe be a general > >> consensus at least? > > ^^^^^^^^^ > > > >Not likely on this list. More likely, a "preponderance", maybe even a > >"majority", but I wouldn't be surprised if even those aren't achieved. > >BTW, "general" is redundant with "consensus". > > I'm sorry. I'm not a native English speaker or writer. > > Ok, so what would you guys suggest using on a laptop, if CentOS was not an > option? I read in an earlier post where somebody suggested chosing distro > based on the hardware. Suppose this hardware is a Dell Latitude a few years > old, with no built-in wifi, but rather either a Dlink DFE-680TXD or a 3com > 3CRWE154G72. CentOS will work just fine. (Probably *any* distro will work just fine.) CentOS will work with older hardware. The only hardware that will be problematical will be winmodems -- *ALL* linux distros do badly with winmodems. It is a combination of lack of documentation about what is going on inside the winmodem and a serious lack of motivation: most Linux developers have real internet connections and no longer have an interest in dialup, plus *real* (RS232-based) modems are cheap and ALL of them work out-of-the-box. From many points of view, winmodems are pointless hardware. CentOS only has these problems WRT laptops (or desktops to a lesser extent): It is an 'conservitive' distro (same can be said about all of the RHEL-based distros). This means three *main* things: 1) Support for bleeding edge hardware might be a problem. Mostly things like sound cards, WiFi NICs, and (cheap) digital cameras. Most other hardware is 'standardized' enough to work on some level (eg video cards will work at basic resolution levels, etc.) RedHat does back port critical hardware drivers (things like mass storage controller drivers (SATA, SCSI, RAID, etc.)). 2) You won't get the most recent, hot, bleeding edge version of software. You also won't get buggy software either. No great loss IMHO. 3) RHEL distros will lack most of the flashy toys (eg fancy multi-media), including flashy eye-candy. Only 1 is really a 'problem' for laptops, since fresh off the showroom floor laptops tend to have all sorts of bleeding edge hardware. With a desktop one can mix-and-match compatible PCI cards, etc. and avoid or cure these problems. One *could* just snarf a suitable kernel from FC-land if one knows what one is doing, etc. 2 & 3 can be solved with a combination of CentOSPlus, epel, rpmforge, and lots of fun with rpmbuild and srpms from FC-land (or even more fun with tar & make and related tools). I've even dropped in RPMs from Mandrake and SUSE onto my system (rpmfind.net can be quite useful at times). I've even snarfed srpms from other distros and bashed them though rpmbuild, usually after tinkering with the .spec file. -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

1 0

Re: [CentOS] Auto-installing security updates?
by William L. Maltby 25 May '09

25 May '09

On Mon, 2009-05-25 at 15:02 +0200, Sorin Srbu wrote: > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of William L. Maltby > ><snip> > > > >Not likely on this list. More likely, a "preponderance", maybe even a > >"majority", but I wouldn't be surprised if even those aren't achieved. > >BTW, "general" is redundant with "consensus". > > I'm sorry. I'm not a native English speaker or writer. NP. I was not trying to rebuke you. Many "native English speakers" make much more serious errors consistently. You do just fine. I make my share of mistakes - especially since I started using the web so long ago. > > Ok, so what would you guys suggest using on a laptop, if CentOS was not an > option? I read in an earlier post where somebody suggested chosing distro > based on the hardware. Suppose this hardware is a Dell Latitude a few years > old, with no built-in wifi, but rather either a Dlink DFE-680TXD or a 3com > 3CRWE154G72. I don't have one, but with the holiday in the US, you might not get many replies today. The last time this topic was raised, opinions were all over the place. If you google for "laptop" and Centos together with site:centos (maybe a few more words to narrow the search, like "distro", "preferred", etc.) in the google advanced search area (it has a specific box for the site so you can just enter "centos" there if you choose to do so) you'll probably find the previous thread fairly quickly. > <snip sig stuff> HTH -- Bill

2 1

Re: [CentOS] Auto-installing security updates?
by Robert Heller 25 May '09

25 May '09

At Mon, 25 May 2009 10:56:13 +0200 CentOS mailing list <centos(a)centos.org> wrote: > > Content-language: sv > > > ---Executing: recode > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of Lanny Marcus > >Sent: Wednesday, May 20, 2009 3:14 PM > >To: CentOS mailing list > >Subject: Re: [CentOS] Auto-installing security updates? > > > >Probably not the best distro for Laptops, > >but many people on this list are using CentOS on their laptops. > > So what's considered to be the "best" choice for laptops? I understand > mileage may vary and so on, but I think there might maybe be a general > consensus at least? > > Unfortunately I haven't had too good an experience with CentOS out-of > the-box-installs with respect to wifi-NICs on laptops, but that's also the > only thing I've been having problems with OTOH. The *Intel* WiFi-NIC (Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter) on my IBM Thinkpad X31 worked mostly out-of-the-box. I just needed to download the firmware and I was up. So did the SMC Ez Connect PCMCIA card I used on my previos laptop (I think it was a prism54 flavor), also once I snarfed the proper firmware for it. -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

2 1

Re: [CentOS] Auto-installing security updates?
by William L. Maltby 25 May '09

25 May '09

On Mon, 2009-05-25 at 10:56 +0200, Sorin Srbu wrote: > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf > >Of Lanny Marcus > >Sent: Wednesday, May 20, 2009 3:14 PM > >To: CentOS mailing list > >Subject: Re: [CentOS] Auto-installing security updates? > > > >Probably not the best distro for Laptops, > >but many people on this list are using CentOS on their laptops. > > So what's considered to be the "best" choice for laptops? I understand > mileage may vary and so on, but I think there might maybe be a general > consensus at least? ^^^^^^^^^ Not likely on this list. More likely, a "preponderance", maybe even a "majority", but I wouldn't be surprised if even those aren't achieved. BTW, "general" is redundant with "consensus". > > <snip> -- Bill

2 1

Traffic Analyzer
by Jason Todd Slack-Moehrle 25 May '09

25 May '09

Hi Guys, My Server at Mosso has more than doubled in bandwidth over the last week. Mosso recommended getting an analyzer tool to tell me why. What can you guys recommend, easy to install and informative? Thanks! -Jason

3 2

OT: SMART warning on hard drive, same warning for 2 1 /2 years
by Lanny Marcus 25 May '09

25 May '09

My wife's box has a very intermittent problem, when booting from the Maxtor IDE hard drive. This has been going on for about 2 1/2 years.... The box is a Compaq EVO D300v for the Enterprise. When it boots, there is a SMART advisory from the BIOS that says failure is immenient. Occasionally, it will not boot, because the BIOS does not see the hard drive. I replaced the EIDE cable, but the problem of sometimes not seeing the hard drive on boot continues. I suspect it has to do with something loose in the electronics of the drive, because if I press on both ends of the EIDE cable, the problem goes away and then it will boot OK. The box is currently M$ Windows only. I just booted it from my Knoppix Live CD and ran smartctl on it. Below are the results. When I ran the Maxtor Diagnostics on the hard drive, 3 times, each time the quick 90 second SMART test said that I should run the Read test, which takes about one hour. Each time I ran the Read test, it passed OK. 3 times. Should I suggest to my wife that she let me replace the hard drive, now, at her convenience, before it fails completely? Is there anything in the smartctl results that indicates that is not the appropriate thing to do, considering the length of time this problem has existed? I did not run the Maxtor Burn In test or low level format, because I do not want to reinstall everything on this hard drive. The smartctl results certainly seem to indicate something badly awry, which the Maxtor Diagnostics, on the Read only test, did not pick up. TIA! Lanny root@Knoppix:~# smartctl -d ata -H /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. Failed Attributes: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 10 Spin_Retry_Count 0x002b 222 215 223 Pre-fail Always FAILING_NOW 29 root@Knoppix:~# smartctl -d ata -a /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax D540X-4D Device Model: Maxtor 4D080H4 Serial Number: D40SBVYE Firmware Version: DAH017K0 User Capacity: 81,964,302,336 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0 Local Time is: Sun May 24 17:44:28 2009 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 64) The previous self-test completed having a test element that failed and the test element that failed is not known. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 51) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 202 199 063 Pre-fail Always - 18883 4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 2809 5 Reallocated_Sector_Ct 0x0033 239 239 063 Pre-fail Always - 37 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 250 243 187 Pre-fail Always - 47480 9 Power_On_Minutes 0x0032 253 250 000 Old_age Always - 0h+18m 10 Spin_Retry_Count 0x002b 222 215 223 Pre-fail Always FAILING_NOW 29 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 249 249 000 Old_age Always - 1722 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 24 196 Reallocated_Event_Count 0x0008 251 251 000 Old_age Offline - 2 197 Current_Pending_Sector 0x0008 253 249 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0 202 TA_Increase_Count 0x000a 253 251 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 239 235 000 Old_age Always - 13 208 Spin_Buzz 0x002a 245 242 000 Old_age Always - 8 209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 3379 inconsistent with error log pointer 5 ATA Error Count: 3379 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3379 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 a5 5a a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 08 d6 01 01 a5 5a a0 02 03:14:14.480 DEVICE RESET b0 d6 01 9f 4f c2 a0 00 03:12:29.984 SMART WRITE LOG b0 d5 01 9f 4f c2 a0 00 03:12:29.968 SMART READ LOG b0 d6 01 50 4f c2 a0 00 03:12:26.512 SMART WRITE LOG b0 d9 01 00 4f c2 a0 00 03:12:26.480 SMART DISABLE OPERATIONS Error 3378 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 0b 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d6 01 9f 4f c2 a0 00 03:12:29.984 SMART WRITE LOG b0 d5 01 9f 4f c2 a0 00 03:12:29.968 SMART READ LOG b0 d6 01 50 4f c2 a0 00 03:12:26.512 SMART WRITE LOG b0 d9 01 00 4f c2 a0 00 03:12:26.480 SMART DISABLE OPERATIONS b0 d6 01 50 4f c2 a0 00 03:12:26.416 SMART WRITE LOG Error 3377 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 0b 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d5 01 9f 4f c2 a0 00 03:12:29.968 SMART READ LOG b0 d6 01 50 4f c2 a0 00 03:12:26.512 SMART WRITE LOG b0 d9 01 00 4f c2 a0 00 03:12:26.480 SMART DISABLE OPERATIONS b0 d6 01 50 4f c2 a0 00 03:12:26.416 SMART WRITE LOG 41 ff 00 00 b9 8a e9 00 03:12:26.416 READ VERIFY SECTOR(S) [OBS-5] Error 3376 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 0b 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d6 01 50 4f c2 a0 00 03:12:26.512 SMART WRITE LOG b0 d9 01 00 4f c2 a0 00 03:12:26.480 SMART DISABLE OPERATIONS b0 d6 01 50 4f c2 a0 00 03:12:26.416 SMART WRITE LOG 41 ff 00 00 b9 8a e9 00 03:12:26.416 READ VERIFY SECTOR(S) [OBS-5] 41 ff 00 00 b8 8a e9 00 03:12:26.400 READ VERIFY SECTOR(S) [OBS-5] Error 3375 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 0b 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d6 01 50 4f c2 a0 00 03:12:26.416 SMART WRITE LOG 41 ff 00 00 b9 8a e9 00 03:12:26.416 READ VERIFY SECTOR(S) [OBS-5] 41 ff 00 00 b8 8a e9 00 03:12:26.400 READ VERIFY SECTOR(S) [OBS-5] 41 ff 00 00 b7 8a e9 00 03:12:26.400 READ VERIFY SECTOR(S) [OBS-5] 41 ff 00 00 b6 8a e9 00 03:12:26.400 READ VERIFY SECTOR(S) [OBS-5] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: unknown failure 00% 0 - # 2 Short offline Completed: unknown failure 00% 0 - # 3 Short offline Completed: unknown failure 00% 997 - # 4 Short offline Completed without error 00% 905 - # 5 Short offline Completed without error 00% 664 - # 6 Short offline Completed without error 00% 664 - # 7 Short offline Completed: unknown failure 00% 1 - # 8 Short offline Completed: unknown failure 00% 9 - # 9 Short offline Completed: unknown failure 00% 215 - #10 Short offline Completed without error 00% 215 - #11 Extended offline Completed without error 00% 213 - #12 Short offline Completed: read failure 60% 187 80417451 #13 Extended offline Completed: read failure 20% 184 80417451 #14 Short offline Completed without error 00% 181 - #15 Extended offline Completed: read failure 20% 151 80417451 #16 Short offline Completed without error 00% 151 - #17 Short offline Completed without error 00% 139 - #18 Short offline Completed: read failure 60% 45 208052 #19 Short offline Completed without error 00% 5 - #20 Extended offline Completed without error 00% 4 - #21 Short offline Completed without error 00% 3 - Device does not support Selective Self Tests/Logging root@Knoppix:~#

6 5

IMPORTANT: Issue with Linuxtag 2009
by Ralph Angenendt 25 May '09

25 May '09

Hi, due to clashing issues here at work I will not be able to make it to Linuxtag 2009, as I won't be able to get free time during that week. That at the moment leaves us with Didi and Chris Geldenhuis, which isn't enough to man a booth during 4 days. Is anyone else interested to come to man the booth there? Otherwise we might have to call it off for this year. If so it would be nice if you could subscribe to the centos-promo list <http://lists.centos.org/mailman/listinfo/centos-promo> and tell us there (or answer here). Cheers, Ralph

1 0

madwifi not working for 5.2 x64
by sumit agarwal 25 May '09

25 May '09

hi . i installed madwifi on 5.2 x64 but it dosent seem to be working any clues? pls help :) --

4 5

Send syslog to a remote server
by hce 25 May '09

25 May '09

Hi, I am running CentOS 5 and I tried to config flowing statement in syslog.conf to send syslog messages to a remote server running on FC 9, but it did not work. There was nothing send to the FC9. "*.info;mail.none;authpriv.none;cron.none @@192.168.1.5" Could anyone advice whether the syslog in CentOS 5 does not support remote server, or I could be missing something? System: DISTRO_NAME=centos DISTRO_VERSION=5 DISTRO_CODENAME=final DISTRO_PATCHLEVEL=5 DISTRO_ARCH=x86_64 DISTRO_KERNEL=2.6.18_53.el5 Thank you. Kind Regards, jupiter

7 9

Auto-installing security updates?
by Anne Wilson 25 May '09

25 May '09

I've been asked to think about setting up an installation for a recently- widowed man. His needs are small - mail, Internet, on-line banking, basically - but his wife dealt with all of it on her laptop and he feels very insecure. It seems to me that CentOS would be perfect for him except for the need to keep it securely patched. I'm wondering if it's possible to auto-install security updates - for that matter, with so small a set of applications perhaps auto-installing every update would be good enough. Maybe this could be done with a script run under cron.daily, so that anacron picks it up? I'd be glad of any advice. Anne

20 42

32bit vs 64bit memory usage
by George Negoita 25 May '09

25 May '09

Hi! I ran the following test on 3 different setups: #!/usr/bin/php <? $n=1024*256; $usage1=memory_get_usage(); $rusage1=memory_get_usage(true); $a=array(); for($i=0;$i<$n;$i++) $a[]=0; $usage2=memory_get_usage(); $rusage2=memory_get_usage(true); echo ($usage2-$usage1).'/'.($rusage2-$rusage1); ?> ...and I got the following results: 32bit kernel & 32bit php - 18875368/19136512 64bit kernel & 64bit php - 35654376/35913728 64bit kernel & 32bit php - 18875368/19136512 Some client has a 64bit xen-based VPS with 512MB RAM user for webhosting and I'm wondering if I can free some memory installing httpd&php i386 modules. I understand that 64bit programs use more memory because the pointers, integers, etc. are now 64bit instead of 32bit, but running a 32bit program on a 64bit architecture is the same as running that program on a 32bit architecture (just concerning the memory used)? At least, that's my conclusion after running the above test. Am I wrong? Thank you! PS: No, the client's service provider does not offer a 32bit vps platform and the client won't change the provider or pay for additional memory. -- George Negoita System Administrator iMedia Plus Group

4 3

Video on (video-capable digital) still camera not accessible
by MHR 25 May '09

25 May '09

I'm looking for any intelligent commentary on this - it may be a little off topic, but I'm wondering if anyone knows about this. This isn't short, so bear with me. Yesterday, I tried to download a video off of one of my digital still cameras that also takes videos (Canon Powershot SX10 iS) on my CentOS x86_64 5.3 system. When I plugged the camera into a USB port and turned it on, it showed no images available, AND no device showed up mounted for it. Now, this is not entirely unusual. I know there's a .mov on the camera, two actually, so I tried putting the SD card in a card reader and plugged that in. Nothing. No "disk" was mounted, which is what normally happens when I do that. I ran lsusb, and got this: [mhr@mhrichter ~]$ lsusb Bus 001 Device 072: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader Bus 001 Device 001: ID 0000:0000 Bus 002 Device 009: ID 03f0:0205 Hewlett-Packard ScanJet 3300c Bus 002 Device 001: ID 0000:0000 Bus 002 Device 003: ID 04f9:0033 Brother Industries, Ltd That looks normal, but no device is mounted. I tried doing a gnome-mount on /dev/sdd and /dev/sde and both came up with a "no data" error. I tried mounting /dev/sdd (which is where the device should be) as a vfat, and that hung. I got a similar response when I plugged in the camera with the SD card in it and it shows up in lsusb: [mhr@mhrichter ~]$ lsusb Bus 001 Device 073: ID 04a9:318d Canon, Inc. Bus 001 Device 001: ID 0000:0000 Bus 002 Device 009: ID 03f0:0205 Hewlett-Packard ScanJet 3300c Bus 002 Device 001: ID 0000:0000 Bus 002 Device 003: ID 04f9:0033 Brother Industries, Ltd I even took a photo, just so there would be a recognizable image on the camera for the Image Importer, and that worked, but the two .mov files were still not showing up anywhere. Then I figured, well, maybe if CentOS doesn't like this, my Windows XP guest might be able to do something with it. (Hahahahaha! Not funny....) I brought up the Win guest, attached the USB "drive" for the camera and Windows installed the device just fine. I opened an Explorer window and the camera was there, with the photo and two .mov files in its folder, so I went in and clicked the photo and that was it. The Windows guest crashed, and when it came back up, it booted so slowly I wasn't sure it was going to boot at all, and the network connections were gone. I tried a number of things (restart Samba, reboot Windows in safe mode, then back to normal, restart Samba with Windows running, on and on). Nothing worked. All the TCP/IP settings were the same, and the network "card" showed one connection that was active, but no IP address, no path to host, pings all failed, etc. This morning, I figured that, since the guest network seemed to have been blown away completely, I'd reconfigure it and try again. Voila! All my drives are now sharing properly and the NAT network between host and guest works just fine. I am wondering if anyone could hazard a guess w.r.t. these issues: 1) CentOS not seeing either device (camera or SD-in-reader) as mountable 2) How to mount the SD card manually given that it does not appear to be a vfat (which is how most of these have shown up before IIRC). 3) VMWare losing its network configuration (or whatever it lost) that smashed its network connection to the host 4) (most important) Any ideas on how to get at the video files on the SD card (if I can mount it as the right kind of fs, that would be enough) Thanks. mhr

6 14

NetworkManager under CentOS 4 *without* GNome...
by Robert Heller 24 May '09

24 May '09

I have been *manually* dealing with my wired and wireless network interfaces on my laptop. I have a pair of config files (in /etc/sysconfig/network-scripts/: ifcfg-eth0 (wired: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile)) and ifcfg-eth1 (wireless: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter), both with USERCTL=true (and ifcfg-eth0 also has ONBOOT=true). I have manually fiddled with the ESSID, etc. in ifcfg-eth1 when needed, but this is tiresome. I would like to use NetworkManager, since this sounds like it might be easier. I don't use the GNome desktop, so I probably won't be able to use the stock GNome applet (this would not be a problem normally since I would just write my own GUI thingy, but there seems to be a complete lack of documentation for the GNome applet! But I have the source code and will figure it out eventually.). I use FVWM as a window manager and don't use a "desktop manager" at all. I run CentOS 4.8 on my laptop (and no, I am in no hurry to upgrade to CentOS 5). I've started NetworkManager (as root) and started NetworkManagerInfo (both as myself and a 'dummy' user with a vanila GNome desktop), but NetworkManagerInfo complains that there are no network interfaces available. Where does NetworkManager/NetworkManagerInfo get information about available network interfaces? I know that *both* interfaces work just fine using the manual startup (eg ifup eth0 and ifup eth1). Is there a config file I need to mess with? If so, where is it? I tried googling and could not find any difinitively usefull information (http://www.ces.clemson.edu/linux/nm.shtml has some information for FC5, but it is not totally helpful). -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

2 2

Weird performance problem
by Ugo Bellavance 24 May '09

24 May '09

Hi, I'm running a CentOS 4. server and I sometimes face a weird problem. It is a weird performance problem, and here is how I discovered it. This server runs OpenVZ virtual machines, and one of them is an asterisk server for my personal use. The first symptom of the problem is that the voice quality became flaky. So I logged on the server to see what could be eating cpu cycles, when I ran top, it took almost one minute before top actually showed. Another hint is that when I run dstat (a monitoring utility that is a mix of iostat and vmstat and other stats), I often get a "missed xx ticks", where xx is a number. Example (current) (sorry for the wrap): ----total-cpu-usage---- -dsk/total- -net/total- ---paging-- ---system-- usr sys idl wai hiq siq| read writ| recv send| in out | int csw 3 2 93 2 0 0| 106k 273k| 0 0 | 0.2 0.4 |1039 389 3 6 91 0 0 0| 0 6416k| 276k 275k| 0 0 |2160 6822 missed 55 ticks 4 10 84 2 0 0|1200k 1992k| 82k 93k| 0 0 |1188 6275 missed 29 ticks 1 0 99 0 0 0| 0 1312k| 65k 66k| 0 0 |1050 1114 missed 38 ticks 2 1 96 0 0 0| 0 1168k| 57k 59k| 0 0 | 491 877 missed 13 ticks 3 1 94 1 0 0| 0 6016k| 181k 176k| 0 0 |2169 5996 missed 50 ticks 4 2 91 1 0 0| 28k 8744k| 216k 214k| 0 0 |2159 5438 missed 37 ticks 1 1 98 0 0 0| 0 2632k| 93k 91k| 0 0 | 983 1381 missed 34 ticks 1 1 98 1 0 0| 0 5624k| 113k 110k| 0 0 |1569 2643 missed 52 ticks 1 1 98 1 0 0| 0 2432k| 29k 28k| 0 0 | 679 647 missed 12 ticks 0 0 100 0 0 0| 0 0 | 60B 374B| 0 0 | 13 15 2 3 94 0 0 0| 0 1872k| 209k 210k| 0 0 |1375 3590 missed 30 ticks The problem is currently occuring, but it doesn't seem to be affecting voice quality for now, so I have some time to try to find the cause. The only solution I've found up to now is to reboot... But hey, this isn't a Windows 98 machine :)! I tried restarting the VZ system, which restarts all the VMs, but it didn't solve the problem. I can't tell if the problem occurs on a stock centos kernel, because the server is running production (but non-critical) virtual machines, so it is always running the openVZ kernel. So here is what I've done for now: - Top shows a load of about 0.4 - vmstat 1 10 shows this: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 592 191092 381720 537956 0 0 53 68 4 3 3 2 93 2 0 0 592 190720 381720 537956 0 0 0 0 32 60 1 1 98 0 0 0 592 191092 381720 537956 0 0 0 0 41 59 0 0 100 0 1 0 592 191092 381728 537948 0 0 0 2584 311 96 10 4 66 19 0 0 592 189968 381732 537944 0 0 0 2080 222 174 2 3 79 16 0 1 592 189968 381732 537944 0 0 0 3244 170 73 10 4 73 12 0 0 592 190216 381732 537944 0 0 0 136 76 113 1 2 93 4 0 0 592 189844 381732 537944 0 0 0 0 33 69 1 1 98 0 0 0 592 189844 381732 537944 0 0 0 0 24 32 0 0 100 0 0 0 592 190340 381732 537944 0 0 0 0 28 42 0 0 100 0 iostat -x 1 (excerpt) Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 171.00 0.00 124.00 0.00 2368.00 0.00 1184.00 19.10 0.14 1.13 0.02 0.20 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdc 0.00 171.00 0.00 124.00 0.00 2368.00 0.00 1184.00 19.10 0.17 1.35 0.02 0.30 sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md1 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.30 1.01 0.02 0.50 dm-3 0.00 0.00 0.00 294.00 0.00 2352.00 0.00 1176.00 8.00 0.30 1.01 0.02 0.50 dm-4 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-5 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-6 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Any insight would be greatly appreciated. It is not critical, but I'd be glad to be able to finally pinpoint and solve the problem. Hardware: HP Netserver, software raid, SCSI disks, 1.7 GB RAM. I can provide more information if needed. Thanks, Ugo

5 10

HP L7780 support in hplip 1.6.7???
by Camron W. Fox 24 May '09

24 May '09

Alle, I have an HP L7780 MFP, which is supported under hplip 1.7.2 but not the current install of 1.6.7. Does anyone know of a way just to add that particular driver to 1.6.7, or will it require removing the standard 1.6.7 and doing a custom install of 1.7.2. If the latter, what would you consider the dangers/other implications of going "rogue"? Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu Management Services of America, Inc. E-mail: cwfox(a)us.fujitsu.com Phone: (808) 934-4102 Cell: (808) 937-5026

3 2

cd to folder with spaces - in a script
by Michael Casey 24 May '09

24 May '09

How can I cd into a dir, when it contains spaces, and I need to use it in a script? the directory: /home/user/this is a folder/something normally I would use: cd /home/user/this\ is\ a\ folder/something/ but in a script I cant just add the "\" like: find . -type d | while read FOLDER; do cd $FOLDER; done $ No such file or directory the problem is, that there would be more "special chars" then spaces, "sed" them all? :D Thank you

3 4

Where can I get the source package of the RPM alsa-driver-1.0.20-78.el5.i386.rpm
by jasonwen 24 May '09

24 May '09

2 1

Gnome terminal oddity
by James B. Byrne 24 May '09

24 May '09

I have the following gnome terminal profile settings: Backspace = ASCII DEL Delete Key = Escape Sequence If the logged in session in the terminal window is my own user id then the delete key does nothing. If however, I su -l in the same terminal window then the delete key removes the character under the cursor and left shifts the rest of the line. I am fairly confident that the delete key worked in the same fashion for my usual user id up until quite recently. Does anyone know of why or how this behaviour could differ between two separate users in the same terminal window? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

ntfs-3g question
by MHR 24 May '09

24 May '09

This is probably a dumb question, but I've looked around and I can't find anything on this. I'm using ntfs-3g now, from rpmforge, to access my M$ Window$ disks for offline backup and other such menial tasks, and I noticed that the ntfs file systems are not mounted automatically, but I have to mount them manually as ntfs-3g devices. I _thought_ when I installed the whole dkms-fuse and fuse-ntfs-3g packages from rpmforge that they would be more integrated into the system (i.e., direct automount). Is that just my erroneous expectation, or did I miss something in the installation process? Thanks. mhr PS: Still no resolution on the Canon problem. Canon suggested I use a card reader (which I mentioned having tried and failed in my question to them). LOVE that tech support for Linux....

4 6

sendmail analyzer
by Frank Cox 23 May '09

23 May '09

For some years now I have been running Sendmail Analyzer in a nightly cron job. While it works fine and I don't really see any shortcomings, I'm wondering if there might be something else that's better that I don't know about. -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

Re: [CentOS] Intel Atom systems?
by Per Qvindesland 23 May '09

23 May '09

Hi Sure not a problem, i am never really consider power any much in a rack since there a other stuff in my racks that sucks a lot more power then a p4 dual machine :) Per E-mail: per(a)norhex.com [1] http://www.linkedin.com/in/perqvindesland [2] --- Original message follows --- SUBJECT: Re: [CentOS] Intel Atom systems? FROM: Peter Arremann TO: "CentOS mailing list" DATE: 23-05-2009 20:55 On Saturday 23 May 2009 02:15:54 pm Per Qvindesland wrote: > I am not so sure that I would go for something with an Atom processor > installed if it is going to be on 24/7 then I would rather if price > has to be low, look at building a machine with a p4 dual core, they > are really cheap and don't mind being on 24/7 after all Atom has half > the processing speed as a pentium m processor. > > Per Per, sorry to be so direct - but in my opinion that's a horrible recommendation because within a few months, you spent more on power than the system costs... Even with speedstep properly configured, you're going to burn a lot more power on any P4.Doing the same basic file and print services, the Atom boxes we built used around 35W average vs 140W on the P4 dual cores that they replaced. Only had one failure so far but we think that was user error - something seems to have blocked the fan because all other systems had lots of dust in it and the failed unit was perfectly clean.... Overall, the Atom boxes worked great for us. We didn't have a specific reason not to choose VIA, atom boards were just easier to find, at least when we were doing this. Can't help you with a specific model board though since we only needed a single lan port... Peter. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Links: ------ [1] http://webmail.norhex.com/# [2] http://www.linkedin.com/in/perqvindesland

1 0

Re: [CentOS] Intel Atom systems?
by Per Qvindesland 23 May '09

23 May '09

I am not so sure that I would go for something with an Atom processor installed if it is going to be on 24/7 then I would rather if price has to be low, look at building a machine with a p4 dual core, they are really cheap and don't mind being on 24/7 after all Atom has half the processing speed as a pentium m processor. Per E-mail: per(a)norhex.com [1] http://www.linkedin.com/in/perqvindesland [2] --- Original message follows --- SUBJECT: [CentOS] Intel Atom systems? FROM: Bill Campbell TO: "centos(a)centos.org" DATE: 23-05-2009 19:22 Any comments on CentOS 5 on Intel Atom CPUs? I need to build a couple of inexpensive systems that will be used primarily as gateway/firewall systems with OpenVPN, and need recommendations in reliable hardware platforms. These will need two NICs. Bill -- INTERNET: bill(a)celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way Voice: (206) 236-1676 Mercer Island, WA 98040-0820 Fax: (206) 232-9186 Skype: jwccsllc (206) 855-5792 The demands of the majority are always greater than taxation alone can provide and thats where the FED comes in. The value of the dollar has depreciated 97% since the creation of the FED. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Links: ------ [1] http://webmail.norhex.com/# [2] http://www.linkedin.com/in/perqvindesland

2 1

Re: [CentOS] CentOS-announce before mirrors ready?
by MHR 23 May '09

23 May '09

On Sat, May 23, 2009 at 9:00 AM, <centos-announce-request(a)centos.org> wrote: > Send CentOS-announce mailing list submissions to > centos-announce(a)centos.org > <snip> > > > Today's Topics: > > 1. CESA-2009:1060 Important CentOS 5 i386 pidgin Update > (Karanbir Singh) > 2. CESA-2009:1060 Important CentOS 5 x86_64 pidgin Update > (Karanbir Singh) > 3. CESA-2009:1061 Important CentOS 5 x86_64 freetype Update > (Karanbir Singh) > 4. CESA-2009:1061 Important CentOS 5 i386 freetype Update > (Karanbir Singh) Just received the above. Ran yum update: [mhr@mhrichter ~]$ sudo yum update Password: Loaded plugins: fastestmirror, priorities Loading mirror speeds from cached hostfile * base: centos.cogentcloud.com * updates: mirrors.versaweb.com * extras: mirrors.easynews.com kbs-CentOS-Extras | 951 B 00:00 base | 1.1 kB 00:00 updates | 951 B 00:00 extras | 1.1 kB 00:00 0 packages excluded due to repository priority protections Setting up Update Process No Packages marked for Update I've noticed this more and more over the last few months, especially since 5.3 came out, and I'm wondering: Are these announcements being sent before the mirrors are getting updated? I know what's involved in releasing and announcing updates and such (done that enough!), so I'm not complaining, but I am curious. The last several of these I had to wait 6-8 hours or more before the updates were yum-able. Of course, it would be nice, from an end-user's perspective, if the updates were available by the time the announcement went out, and ISTR it used to be this way.... Anyway, to the CentOS team: great job of keeping us up-to-date, especially on security issues. This is just a nit, of mine, no worries.... Thanks! mhr

3 2

Samba Question
by Bo Lynch 23 May '09

23 May '09

Hopefully very easy question to answer. I am trying to migrate data of of a samba server that is using winbind joined to a windows domain to another box. What samba or winbind files do I need so that this will resolve to names rather than UID and GID. For example........ drwxr-x--- 1049 10926 10005 36864 May 15 11:46 Student Thanks -- Bo Lynch

4 10

CentOS-announce Digest, Vol 51, Issue 10
by centos-announce-request＠centos.org 23 May '09

23 May '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:1060 Important CentOS 5 i386 pidgin Update (Karanbir Singh) 2. CESA-2009:1060 Important CentOS 5 x86_64 pidgin Update (Karanbir Singh) 3. CESA-2009:1061 Important CentOS 5 x86_64 freetype Update (Karanbir Singh) 4. CESA-2009:1061 Important CentOS 5 i386 freetype Update (Karanbir Singh) 5. CESA-2009:1040 Critical CentOS 4 s390(x) ntp - security update (Pasi Pirhonen) 6. CESA-2009:0955 Moderate CentOS 4 s390(x) nfs-utils - security update (Pasi Pirhonen) 7. CESA-2009:0981 Low CentOS 4 ia64 util-linux - security update (Pasi Pirhonen) 8. CESA-2009:0344 Moderate CentOS 4 x86_64 libsoup security update (Karanbir Singh) 9. CESA-2009:0344 Moderate CentOS 4 i386 libsoup security update (Karanbir Singh) 10. CESA-2009:0354 Moderate CentOS 4 i386 evolution-data-server security update (Karanbir Singh) 11. CESA-2009:0354 Moderate CentOS 4 x86_64 evolution-data-server security update (Karanbir Singh) 12. CESA-2009:0355 Moderate CentOS 4 i386 evolution and evolution-data-server security update (Karanbir Singh) 13. CESA-2009:0355 Moderate CentOS 4 x86_64 evolution and evolution-data-server security update (Karanbir Singh) 14. CESA-2009:0362 Moderate CentOS 4 x86_64 NetworkManager security update (Karanbir Singh) 15. CESA-2009:0362 Moderate CentOS 4 i386 NetworkManager security update (Karanbir Singh) 16. CESA-2009:0437 Critical CentOS 4 x86_64 seamonkey security update (Karanbir Singh) 17. CESA-2009:0437 Critical CentOS 4 i386 seamonkey security update (Karanbir Singh) 18. CEBA-2009:0407 CentOS 4 i386 pidgin Update (Karanbir Singh) 19. CEBA-2009:0407 CentOS 4 x86_64 pidgin Update (Karanbir Singh) 20. CESA-2009:0411 Moderate CentOS 4 x86_64 device-mapper-multipath security update (Karanbir Singh) 21. CESA-2009:0411 Moderate CentOS 4 i386 device-mapper-multipath security update (Karanbir Singh) 22. CESA-2009:0420 Moderate CentOS 4 i386 ghostscript security update (Karanbir Singh) 23. CESA-2009:0420 Moderate CentOS 4 x86_64 ghostscript security update (Karanbir Singh) 24. CEEA-2009:0422 CentOS 4 i386 tzdata Update (Karanbir Singh) 25. CEEA-2009:0422 CentOS 4 x86_64 tzdata Update (Karanbir Singh) 26. CESA-2009:0429 Important CentOS 4 i386 cups security update (Karanbir Singh) 27. CESA-2009:0429 Important CentOS 4 x86_64 cups security update (Karanbir Singh) 28. CESA-2009:0430 Important CentOS 4 i386 xpdf security update (Karanbir Singh) 29. CESA-2009:0430 Important CentOS 4 x86_64 xpdf security update (Karanbir Singh) 30. CESA-2009:0431 Important CentOS 4 x86_64 kdegraphics security update (Karanbir Singh) 31. CESA-2009:0431 Important CentOS 4 i386 kdegraphics security update (Karanbir Singh) 32. CESA-2009:0457 Moderate CentOS 4 i386 libwmf security update (Karanbir Singh) 33. CESA-2009:0457 Moderate CentOS 4 x86_64 libwmf security update (Karanbir Singh) 34. CESA-2009:0458 Important CentOS 4 i386 gpdf security update (Karanbir Singh) 35. CESA-2009:0458 Important CentOS 4 x86_64 gpdf security update (Karanbir Singh) 36. CESA-2009:0474 Moderate CentOS 4 i386 acpid security update (Karanbir Singh) 37. CESA-2009:0474 Moderate CentOS 4 x86_64 acpid security update (Karanbir Singh) 38. CESA-2009:0476 Important CentOS 4 i386 pango security update (Karanbir Singh) 39. CESA-2009:0476 Important CentOS 4 x86_64 pango security update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 22 May 2009 17:24:35 -0400 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1060 Important CentOS 5 i386 pidgin Update To: centos-announce(a)centos.org Message-ID: <20090522212435.GA2275(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1060 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1060.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 2afc4fd226b72f8aa213917fc282c1aa finch-2.5.5-3.el5.i386.rpm 76648d10100507ffd10ebb5c1778ab0d finch-devel-2.5.5-3.el5.i386.rpm ae6916b477782356ba50ada3d3f00d31 libpurple-2.5.5-3.el5.i386.rpm 415aa228db39eeb6a8eeac231bb7cda2 libpurple-devel-2.5.5-3.el5.i386.rpm 2b210f271e741457784ae5fdace90987 libpurple-perl-2.5.5-3.el5.i386.rpm fe518443fcf62629f01722882bd2ea4e libpurple-tcl-2.5.5-3.el5.i386.rpm e412a66922880ae197a005a6db29c750 pidgin-2.5.5-3.el5.i386.rpm 9ae3bf71de0044c44a10d9131b8ec097 pidgin-devel-2.5.5-3.el5.i386.rpm 7c9d82ad6c954854c0e931978c127aa4 pidgin-perl-2.5.5-3.el5.i386.rpm Source: 8f265967c59ba1331395d9bab738b893 pidgin-2.5.5-3.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 22 May 2009 17:24:36 -0400 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1060 Important CentOS 5 x86_64 pidgin Update To: centos-announce(a)centos.org Message-ID: <20090522212436.GA2290(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1060 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1060.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 568f53e3bbf04f8ad397865b619df022 finch-2.5.5-3.el5.i386.rpm 1feef06a037a8312edf777e220263268 finch-2.5.5-3.el5.x86_64.rpm 449fb3b11f64ffc917e0611046a09ab0 finch-devel-2.5.5-3.el5.i386.rpm 0b98f077cb34e957e0855ece176a367c finch-devel-2.5.5-3.el5.x86_64.rpm 20d1b591ee8528e9d1b44a4ac174518f libpurple-2.5.5-3.el5.i386.rpm e3a88ee86e75ee58a7ea8cd2887b8b8b libpurple-2.5.5-3.el5.x86_64.rpm 4bf6c70e8739abcadad0344a737dc3be libpurple-devel-2.5.5-3.el5.i386.rpm 73facefc14e6acb16b18a751128daf20 libpurple-devel-2.5.5-3.el5.x86_64.rpm b38cbfb77f974ad46422cfda516d266d libpurple-perl-2.5.5-3.el5.x86_64.rpm 3231042110de32a2d29040f4cabc687a libpurple-tcl-2.5.5-3.el5.x86_64.rpm 2250dda9c44d0cd66ac6e1a2f4179ea9 pidgin-2.5.5-3.el5.i386.rpm 0b9576ff278e4b2bfc6d833fe1a3b483 pidgin-2.5.5-3.el5.x86_64.rpm 9cf6de095f9685d4990b9b4e5c79bc48 pidgin-devel-2.5.5-3.el5.i386.rpm b67ab79bdbaefa312e86bcbe817ce0a2 pidgin-devel-2.5.5-3.el5.x86_64.rpm e7bff225420de770eb371af8157d579f pidgin-perl-2.5.5-3.el5.x86_64.rpm Source: 8f265967c59ba1331395d9bab738b893 pidgin-2.5.5-3.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 22 May 2009 17:25:29 -0400 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1061 Important CentOS 5 x86_64 freetype Update To: centos-announce(a)centos.org Message-ID: <20090522212529.GA2325(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1061 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1061.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: c176e5295615134ce16f8ce235aa01d5 freetype-2.2.1-21.el5_3.i386.rpm 00f883db4d91cd9be7829de77a2e08d6 freetype-2.2.1-21.el5_3.x86_64.rpm b875df2630c514844e47e364e50bcfb9 freetype-demos-2.2.1-21.el5_3.x86_64.rpm 3c905976006fa71dbf46f44384ee49b1 freetype-devel-2.2.1-21.el5_3.i386.rpm 4d47cecda991557ddf5d2f8aa19acd0f freetype-devel-2.2.1-21.el5_3.x86_64.rpm Source: 95d11287325e9a08b15f2cadefdb2800 freetype-2.2.1-21.el5_3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Fri, 22 May 2009 17:25:29 -0400 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1061 Important CentOS 5 i386 freetype Update To: centos-announce(a)centos.org Message-ID: <20090522212529.GA2310(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1061 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1061.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 5f237811cca492521ff4d22dcc069300 freetype-2.2.1-21.el5_3.i386.rpm adf385da5dc7ef7b53780ee0db2ad01f freetype-demos-2.2.1-21.el5_3.i386.rpm 764b586d5d6f0c75e239fcb4053f2b08 freetype-devel-2.2.1-21.el5_3.i386.rpm Source: 95d11287325e9a08b15f2cadefdb2800 freetype-2.2.1-21.el5_3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Fri, 22 May 2009 19:28:03 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:1040 Critical CentOS 4 s390(x) ntp - security update To: centos-announce(a)centos.org Message-ID: <20090522162803.GJ18516(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:1040 https://rhn.redhat.com/errata/RHSA-2009-1040.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/ntp-4.2.0.a.20040617-8.c4.2.s390.rpm s390x: updates/s390x/RPMS/ntp-4.2.0.a.20040617-8.c4.2.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

web filtering for remote computers
by Dhaval Thakar 23 May '09

23 May '09

Hi, I am using Squid for local users since two years & is working fine. I am trying to implement web filtering for remote computers e.g few laptops & branch / franchise computers on dynamic ips. I do not want to use Squid proxy for it, if all remote computers will use Squid from my public ip, bandwidth utilization will increase. Need valuable suggestion to achieve this. Regards Dhaval http://www.linuxreaders.com/

4 4

USB issues
by Jerry Geis 22 May '09

22 May '09

I am using centos5.3 x86_64 on a gigabyte GA-MA78GM-US2H motherboard. When I insert a USB thumbdrive its detected with dmesg, I mount it and start to copy files. Then I start getting errors: sdd: assuming drive cache: write through sdd: sdd1 sdd2 sd 7:0:0:0: Attached scsi removable disk sdd sd 7:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 1-5: reset high speed USB device using ehci_hcd and address 5 usb 1-5: device descriptor read/64, error -110 usb 1-5: device descriptor read/64, error -110 usb 1-5: reset high speed USB device using ehci_hcd and address 5 usb 1-5: device descriptor read/64, error -110 usb 1-5: device descriptor read/64, error -110 usb 1-5: reset high speed USB device using ehci_hcd and address 5 usb 1-5: device not accepting address 5, error -110 I have also tried connecting a USB hub into my computer and using that. Then plugging the thumbdrive into the hub. I get the same results. I have never had USB issues before - any ideas? Jerry

3 2

Firefox 3, Sun jre1.6.0_12_x86_64 and enabling a plugin
by James B. Byrne 22 May '09

22 May '09

SOMEbody on this list must have this combination working by now. How does one enable the firefox jre plugin for Sun's x86_64 distribution? Every site that I can find refers to making a link to a now non-existent plugins directory under the jre installation directory. The official firefox plugin pages refers to the existence of a Sun x86_64 jre but provides no details on how to enable it. The Sun site speaks only about installing i386 versions. Most other web sites that I have found are for distributions other than CentOS. Help? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss