- Discuss - lists.centos.org

grub issue
by Indunil Jayasooriya 16 Mar '09

16 Mar '09

HI, I always get a grub prompt ,after I installed 2nd processor to the Server IBM x3610 At the grub prompt, I always have to issue below commands. Then, Server starts successfully. grub> root (hd0,0) Filesystem type is ext2fs, partition type 0x83 grub> kernel /vmlinuz-2.6.18-128.1.1.el5PAE [Linux-bzImage, setup=0x1e00, size=0x1bb714] grub> initrd /initrd-2.6.18-128.1.1.el5PAE.img grub> boot Could you pls let me know to overcome this issue? Hope to hear from you. -- Thank you Indunil Jayasooriya

4 4

That RTL8169 thing...
by Drew Weaver 16 Mar '09

16 Mar '09

Motherboard - Intel DG41TY Device: RealTek: 8111D Driver: RTL8169 Causes Kernel panic during install and boot. -- It seems that the newer the card that uses this driver, the worse the problems are. Is there any plan to roll a newer version into the installer or the actual distribution itself? Thanks, -Drew

2 1

Re: [CentOS] NTP error message on /var/log/messages
by mcclnx mcc 16 Mar '09

16 Mar '09

Thanks. You are right. I did NOT reboot after change Ip address. It is correct now. --- 09/3/15 (日)，Filipe Brandenburger <filbranden(a)gmail.com> 寫道： > 寄件者: Filipe Brandenburger <filbranden(a)gmail.com> > 主旨: Re: [CentOS] NTP error message on /var/log/messages > 收件者: "CentOS mailing list" <centos(a)centos.org> > 日期: 2009 3 15 日下午 7:30 > Hi, > > 2009/3/15 mcclnx mcc <mcclnx(a)yahoo.com.tw>: > > I just setup CENTOS 4.7 with latest patches on DELL > server. > > 狢 also configured NTP point to out time server. 狢 > found > > /var/log/messages file every 20 to 30 minutes will > generate > > a error message : > > Mar 15 14:28:15 SER1 ntpd[25037]: > sendto(172.29.21.16): Invalid argument > > I saw this once when I changed a machine's IP but did not > restart the > NTP service. The daemon was still trying to send/receive > packets using > the old IP. After restarting NTP (service ntpd restart) the > problem > was fixed. > > Make sure you also check that NTP is properly synchronizing > the clocks > with the "ntpq -p" command. > > HTH, > Filipe > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

1 0

php 5.2
by Melinda Odom 16 Mar '09

16 Mar '09

Hi, Is there any news about CentOS 5.2 updating to php 5.2? Best Regards, Melinda Odom Design Hosting, Inc. Web Design, Web Hosting, & Ecommerce Solutions 479-471-0891 CST info(a)designhosting.biz http://www.designhosting.biz

5 4

php 5.2
by Melinda Odom 16 Mar '09

16 Mar '09

Hi, I am running centos 5 with php 5.1.6-20 and mysql 5.0.45-7.el5 on a production server running a lot of ecommerce stores. The future next versions of these stores all are requiring php 5.2 at least. I don't want any problems with the ecommerce stores I have now with php 5.1.6-20 so don't know what to do. With the next version of one store I will need php 5.2 plus MySQLi extension. Another store version I will need only php 5.2. I found several posts last night about php 5.2 never being in centos 5 because redhat wouldn't support centos. Any advice is greatly appreciated. Thanks! Best Regards, Melinda Odom Design Hosting, Inc. Web Design, Web Hosting, & Ecommerce Solutions 479-471-0891 CST info(a)designhosting.biz http://www.designhosting.biz

3 3

Re: [CentOS] php 5.2
by Melinda Odom 15 Mar '09

15 Mar '09

Hi, I am running centos 5 with php 5.1.6-20 and mysql 5.0.45-7.el5 on a production server running a lot of ecommerce stores. The future next versions of these stores all are requiring php 5.2 at least. I don't want any problems with the ecommerce stores I have now with php 5.1.6-20 so don't know what to do. With the next version of one store I will need php 5.2 plus MySQLi extension. Another store version I will need only php 5.2. I found several posts last night about php 5.2 never being in centos 5 because redhat wouldn't support centos. Any advice is greatly appreciated. Thanks! Best Regards, Melinda Odom Design Hosting, Inc. Web Design, Web Hosting, & Ecommerce Solutions 479-471-0891 CST info(a)designhosting.biz http://www.designhosting.biz

5 4

Installing php 5.2
by Todd Cary 15 Mar '09

15 Mar '09

In reading the help file for yum, I am confused on how to find out if my php 4.3 can be updated to php 5.2 using yum. Any suggestion would be appreciated... Todd -- Ariste Software Petaluma, CA 94952 http://www.toddcary.com/aristephotography/

2 1

running yum from userid
by Robert Moskowitz 15 Mar '09

15 Mar '09

I added via visudo my userid for authorization of me ALL(ALL) NOPASSWD: ALL and I still cannot run yum as me. Is this just not possible?

5 5

dvd rw not recognized
by Frank Cox 14 Mar '09

14 Mar '09

I installed Centos 5.2 on a brand new computer the other day. It has an Asus DVD RW drive in it which I used to boot the netboot disk off of to install the operating system so it found the dvd at that point. Now k3b tells me that it can't find any drives. [nathalie@jeff ~]$ ll /dev/scd0 brw------- 1 nathalie disk 11, 0 Mar 10 14:00 /dev/scd0 [nathalie@jeff ~]$ ll /dev/cdrom* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom-sr0 -> scd0 [nathalie@jeff ~]$ ll /dev/dvd* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw-sr0 -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd-sr0 -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter-sr0 -> scd0 cdrecord --scanbus tells me this: 1,0,0 100) * 1,1,0 101) '��' '��' '��' Removable vendor specific 7 unknown/no device 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * /var/log/messages tells me this: Mar 10 13:06:22 jeff kernel: sd 1:0:0:0: Attached scsi disk sda Mar 10 13:06:22 jeff kernel: Vendor: ASUS Model: DRW-20B1ST Rev: 1 .00 Mar 10 13:06:22 jeff kernel: Type: CD-ROM ANSI S CSI revision: 05 dmesg tells me this: sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 What am I doing wrong here? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

pop3 attack
by James Pifer 14 Mar '09

14 Mar '09

I was looking at my maillog and it looks like someone is trying to get into my pop3 server. Dec 9 15:28:54 mailserver dovecot: pop3-login: Aborted login: user=<alexis>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:08 mailserver dovecot: pop3-login: Aborted login: user=<alfonso>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:14 mailserver dovecot: pop3-login: Aborted login: user=<alexis>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:18 mailserver dovecot: pop3-login: Aborted login: user=<alfonso>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:36 mailserver dovecot: pop3-login: Aborted login: user=<alfred>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 How worried should I bee about this? Any suggestions for dealing with it? Thanks, James

22 59

External USB disk devices cause high load
by Tom Brown 14 Mar '09

14 Mar '09

Hi On a CentOS 4.7 box running on older hardware when i plug an external flash disk or similar into the system the device shows up in dmesg but it is not usable. The load on the system starts to climb for no apparent reason. If i try to look at the partitions on the disk with fdisk it just hangs. If the device is removed the load remains high. Does anyone know what processes are responsible for USB as top is not really showing me much. thanks

1 0

Unable to use DRBD after a reboot
by robert mena 14 Mar '09

14 Mar '09

Hi, I have two servers in a drbd primary/secondary setup. Everything was fine until I had to reboot both servers. The primary rebooted first, the secondary assumed fine, but when the (old primary) server got back online it was unable to mount the drbd fs complaining about the modules. I've tried to find out the problem but the servers seem to have the same setup rpm -qa | grep drbd drbd82-8.2.6-1.el5.centos kmod-drbd82-8.2.6-2 Kernel 2.6.18-92.1.22.el5 #1 SMP Am I missing something? thanks.

4 3

(no subject)
by wilson mitsui 14 Mar '09

14 Mar '09

Please ignore this message, my previous atempt failed so i'm trying again. -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

2 1

jboss application server rpm
by Kanwar Ranbir Sandhu 13 Mar '09

13 Mar '09

Hi All, I've been trying to locate a jboss application server rpm for CentOS 5, but I haven't found any. I thought it would be included with CentOS. Searching the yum repos hasn't turned anything up. Maybe my yum search was sub-par. Where should I look? Do any rpms exist? Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.27.19-170.2.35.fc10.x86_64 x86_64 GNU/Linux 15:26:31 up 7 days, 14:53, 5 users, load average: 0.79, 0.32, 0.16

4 4

Xterm-color
by Per Qvindesland 13 Mar '09

13 Mar '09

Hi List Has anyone got any clue of why on a centos 4.3 when I am logging in to the machine I am geting the following error tput: unknown terminal "xterm-color" do I am not using xterm-color I can not start top of any other except vi. Does anyone have any clue? Kind regards Per Qvindesland

2 2

procmail recipe
by Jerry Geis 13 Mar '09

13 Mar '09

hi all I am trying to filter emails to a user (weather) based on the subject: :0 *^Subject:.*Weather | /usr/bin/formail | /path/to/executable *^Subject:.*Tornado | /usr/bin/formail | /path/to/executable All it does is deliver the email to the weather inbox. For testing I tried. echo 1 | mail -s "Tornado" weather Enabling verbose and log file gives me: From root(a)devcentos5x64.msgnet.com Fri Mar 13 10:04:07 2009 Subject: Tornado Folder: /var/mail/weather 671 Seems like it should work... What did I miss. Jerry

2 1

date differs permanent some 3450 sec.
by Helmut Drodofsky 13 Mar '09

13 Mar '09

Hi, the date jumps within 30 seconds to a wrong value. ntp service is stopped at the beginning. Whereas hwclock seems more precise. [root@kerio ~]# service ntpd stop Shutting down ntpd: [ OK ] [root@kerio ~]# ntpdate 0.centos.pool.ntp.org 13 Mar 07:04:48 ntpdate[23003]: step time server 131.234.137.24 offset -3450.678273 sec [root@kerio ~]# hwclock Fri 13 Mar 2009 07:04:59 AM GMT -0.014767 seconds [root@kerio ~]# date Fri Mar 13 07:05:02 GMT 2009 [root@kerio ~]# date Fri Mar 13 07:05:14 GMT 2009 [root@kerio ~]# date Fri Mar 13 08:03:01 GMT 2009 [root@kerio ~]# hwclock Fri 13 Mar 2009 07:05:37 AM GMT -0.083628 seconds [root@kerio ~]# /etc/ntp.conf is in original configuration. Remarks: - most of our servers run without X-Windows, this uses X-Windows and Gnome. - the server runs kerio mail services. Even the original from kerio configured VMWare server has had this behavior. - stopping of keriomailserver does not help Helmut

6 6

Postfix smtp_recipient_restrictions causing mail to fail
by Logan Moore 13 Mar '09

13 Mar '09

Hi All, I'm currently playing with smtp_recipient restrictions to try and knock some of this spam on it's head. On my old debian server, I was using this and successfully filtering out at least 90% if not more of all spam emails which was great. I didn't even need spamassassin. However, trying to do the same thing on my new CentOS based server isn't working. With the following enabled, nothing comes through from the outside world. Can anybody see where I've gone wrong. I can't fathom why this would block all incoming emails from the web. smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_invalid_hostname, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_rbl_client zen.spamhaus.org, permit Thanks, Kind regards, Logan Moore

3 5

wodim for CentOS?
by Marcelo M. Garcia 13 Mar '09

13 Mar '09

Hi Is the wodim package available for CentOS? I can only find cdrecord. Thanks Marcelo

3 2

WAY OT: domain name registration .co.za
by Glenn 13 Mar '09

13 Mar '09

Hello All, Very sorry about WAY off-topic query, but you folks really are one of my most International subscribed groups. I am looking for a recommendation for a domain name registrar I can register my .co.za domain name with that won't 'yank my chains'. I tried a couple attempts at registering and found some hidden fees along with the insistence that I had to host my DNS with them. Lots of hosting bundles! I just want a registrar that can register the domain name and use MY DNS servers. I'll do all the hosting, thank you very much! Thanks in Advance! Glenn

7 6

How to find out values from dhcp query
by Robert Moskowitz 12 Mar '09

12 Mar '09

How can I find out what variables and their values were provided by a dhcpd server to my client? I thought perhaps /etc/dhclient-eth1.conf, but that is not the place...

5 8

port based routing
by Marcus Moeller 12 Mar '09

12 Mar '09

Good Evening, I am trying to set up port based routing on a CentOS 5.2 box as described here: http://www.linuxhorizon.ro/iproute2.html (second example) Therefor I have set up the following mangle and routing rules: $IPTABLES -A OUTPUT -t mangle -p tcp --dport 1100 -j MARK --set-mark 1 $IPTABLES -A OUTPUT -t mangle -p tcp --dport 1101 -j MARK --set-mark 2 $IPTABLES -A OUTPUT -t mangle -p tcp --dport 1102 -j MARK --set-mark 3 $IP route add default dev ppp100 table SOESTCOM1 $IP route add default dev ppp101 table VERSATEL1 $IP route add default dev ppp102 table TONLINE1 $IP rule add from all fwmark 1 table SOESTCOM1 $IP rule add from all fwmark 2 table VERSATEL1 $IP rule add from all fwmark 3 table TONLINE1 iptables -t mangle -L -vn output: http://pastebin.centos.org/24626 shows that the packages are marked correctly. Here is an example ip route show table output: default dev ppp102 scope link But it seems (and tcpdump indicates) that packages are still routed via default route, instead. Do I need to set some proc flags to activate port based routing? Best Regards Marcus

1 1

howto prevent gnome_panel from starting up one 5.2 x86_64
by Jerry Geis 12 Mar '09

12 Mar '09

how do I prevent gnome_panel from starting up? once its started I can do "gnome-session-remove gnome_panel" But I dont want it to startup at all. How can I do that? jerry

3 2

Re: [CentOS] Getting "poll: protocol failure in circuit setup" from rsh - solved
by Sorin Srbu 12 Mar '09

12 Mar '09

>-----Original Message----- >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf >Of Sorin Srbu >Sent: Friday, February 20, 2009 11:36 AM >To: 'CentOS mailing list' >Subject: [CentOS] Getting "poll: protocol failure in circuit setup" from rsh > > I inherited a cpu-stats script from the previous *nixadmin at our > department. This script relies on a rsh-command to get the vmstats from the > remote machines and then using a perl script to push it to a web server. > >Now I've just added a new machine running CentOS 5.2 x64 to the script and I >get the error message in the subject line; "poll: protocol failure in >circuit setup". Replying on my own post for archival reasons: The error was in /etc/hosts.allow. I forgot to add a line "in.rshd: FQDN" in hosts.allow on the machine I imaged and then used to install to a bunch of other machines. Easy to miss though, there are a dozen or so other lines in there allowing other daemons and stuff. Fixing that, now "rsh remote-machine vmstat" works as expected. -- /Sorin

1 0

Disk usage for small files in ext3 in CentOS 5
by Filipe Brandenburger 12 Mar '09

12 Mar '09

Hello, I noticed something unusual today. If I "du" a small file (couple of bytes) in CentOS 5, it tells me the file is using 8kb, while I was expecting 4kb which is the block size I'm using. I tried this on several CentOS 5 machines, both x86_64 and i386: $ echo test >test.txt $ ls -l test.txt -rw-rw-r-- 1 filbranden filbranden 5 Mar 11 17:24 test.txt $ du -h test.txt 8.0K test.txt If I do the same on a CentOS 4 machine: $ echo test >test.txt $ ls -l test.txt -rw-rw-r-- 1 filbranden filbranden 5 Mar 11 17:25 test.txt $ du -h test.txt 4.0K test.txt On all machines I tested, both CentOS 4 and CentOS 5: # tune2fs -l /dev/xxxxx ... Block size: 4096 Fragment size: 4096 I could not find any differences that would explain the behaviour. Have you seen this before? Can you reproduce it on your systems? Do you know how to get the CentOS 4 behaviour? More on the point: I'm migrating some data from CentOS 4 to CentOS 5, it's around 70GB of millions of small files. I would like it to still take 70GB, not 140GB. For now, I'm working around this issue by using "-T small" to mke2fs, I'm not sure if it's going to have the effect I want, and I'm not sure about any other impact (performance?) it might have on my filesystem. Thanks, Filipe

8 10

Intermittent NFS problems with NetApp server
by Alfred von Campe 11 Mar '09

11 Mar '09

I've been experiencing some intermittent problems accessing at NetApp server via NFS and automount. I'm running CentOS 5.2 (fully updated) on all my servers and workstations. Usually, everything is working just fine, when suddenly we get the following error: /bin/sh: /home/epd/srcref/swtools/Crontabs/ run_release_requests.sh: Permission denied This is actually an email from cron because we try to run that shell script every minute (yes, the crontab entry is * * * * * /home/epd/ srcref/swtools/Crontabs/run_release_requests.sh), and /home/epd is an automounted directory. Here is its map entry: epd -rw,nointr,rsize=32768,wsize=32768 XXXXXX:/epd When this is happening, other users can successfully access that directory on the server. The directory is actually mounted correctly, and unmounting doesn't fix the issue. Furthermore, the same user that is being denied access, can successfully access that directory on a different server. The problem usually lasts about 20 minutes and then resolves itself. We have been pulling our hair out trying to debug this problem, because it's intermittent and the debug window is fairly short. Recently we have been getting help from one of the NetApp admins, and he ran a command on the NetApp that produced the following warning: The TCP receive window advertised by NFS client XXXXXXX is 5888. This is less than the recommended value of 32768 bytes. You should increase the TCP receive buffer size for NFS on the client. Some googling around got me to check these values for TCP: # sysctl net.ipv4.tcp_mem net.ipv4.tcp_mem = 98304 131072 196608 # sysctl net.ipv4.tcp_rmem net.ipv4.tcp_rmem = 4096 87380 4194304 # sysctl net.ipv4.tcp_wmem net.ipv4.tcp_wmem = 4096 16384 4194304 So these seem fine to me (i.e., the max is greater than 32768). Is there an NFS (as opposed to TCP) setting I should be tweaking? Any ideas why the NetApp is issuing those warnings? Any other suggestions on how to debug this problem? Thanks, Alfred

4 3

Video Editing
by Bo Lynch 11 Mar '09

11 Mar '09

This is kind of a new area for me so I thought I would get the lists opinion. I have a avi video that I need to edit. The main thing that I need to accomplish is to maybe cut the top 1/3 of the frame and blur out a few faces. What would you guys recommend for an app that would accomplish this? Thanks in advance for any info. -- Bo Lynch

6 7

LSI Logic MegaRAID 8480 Storage controller policies?
by drew einhorn 11 Mar '09

11 Mar '09

Life is much better now that I'm using -h instead of the manual. I have a new question about policies Direct and DisDskCache makes sense Cached and EnDiskCache makes sense not so sure about Direct and EnDskCache Cached and DisDsk Cache Do they make sense? -- Drew Einhorn

2 2

CentOS-announce Digest, Vol 49, Issue 5
by centos-announce-request＠centos.org 11 Mar '09

11 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Services outage for : projects.centos.org (Karanbir Singh) 2. CESA-2009:0333-01: Moderate CentOS 2 i386 libpng security update (John Newbigin) 3. CESA-2009:0325-01: Critical CentOS 2 i386 seamonkey security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Mar 2009 20:35:43 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Services outage for : projects.centos.org To: centos-announce(a)centos.org Message-ID: <49B6CF1F.1090704(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Starting at 2300 UTC Mar 11 2009, there will be 2 (two) hours of outage for all services hosted on projects.centos.org The machines that host these services are being moved to another cabinet within the same hosting facility. If there are any questions you might have, drop into #centos-devel and someone from the CentOS infrastructure team will be around to talk with during this outage and a few hours leading upto the outage. -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 11 Mar 2009 14:53:56 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0333-01: Moderate CentOS 2 i386 libpng security update To: centos-announce(a)centos.org Message-ID: <49B735D4.7070607(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0333-01 Moderate: libpng security update Files available: libpng-1.0.14-12.i386.rpm libpng-devel-1.0.14-12.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 3 Date: Wed, 11 Mar 2009 14:59:33 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0325-01: Critical CentOS 2 i386 seamonkey security update To: centos-announce(a)centos.org Message-ID: <49B73725.5050506(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0325-01 Critical: seamonkey security update Files available: seamonkey-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-chat-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-devel-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-dom-inspector-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-js-debugger-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-mail-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-nspr-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-nspr-devel-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-nss-1.0.9-0.30.el2.c2.1.i386.rpm seamonkey-nss-devel-1.0.9-0.30.el2.c2.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 49, Issue 5 **********************************************

2 1

LSI Logic MegaRAID 8480 Storage controller
by drew einhorn 11 Mar '09

11 Mar '09

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system, and at this point I am only using one of the volumes, /dev/sda /dev/sda, /dev/sdb, and /dev/sdd are all 2 drive raid1 mirrors I will be using the hardware raid logical volumes /dev/sdb and /dev/sdd with their current configurations I doubt that the hardware raid device on /dev/hda is causing any problems /dev/sda has two partitiions /dev/sda1 is a 100 MB ext3 partition mounted on /boot /dev/sda2 is a 20 GB lvm logical volume in a 67 GB volume group with an ext3 partition mounted on / the rest of the volume group is empty. I don't like the /dev/sdc is configued. It's configured as a 4 drive raid6. It will be used for database journal, nearly all sequential writes. I would rather use raid10 There are 3 ways to configure the hardware raid. The is something called WebBIOS which is sort of like a web browser that you access from the BIOS. This is ruled out since we will need to maintain the raid configuration with shutting down the operating system, or applications. There is a MegaCLI command line interface that runs under the operating system. Normally I prefer command line tools. But this software is big, and complex. All I have been able to find is a reference manual, that has lots of typos and is not very well organized for me to learn what I need to know. I have not been able to find a tutorial for this software. It will take more time than I have at the moment to figure out this tool. Finally there is the MegaRAID Storage Manager a GUI tool that runs under the OS. I'm running v2.77-00 So the first thing I need to do is delete the unwanted raid6 logical volume. When I try to delete it, it refuses and says: This is an OS drive. The virtual drive cannot be deleted. Any ideas on how to get past this problem with the MegaRAID Storage Manager, or pointers the better documentation, and maybe even a tutorial for the MegaCLI interface. -- Drew Einhorn

4 14

CentOS 5.2 i m having problem with gnome
by Tariq Ismail Dalvi 11 Mar '09

11 Mar '09

Hello to all, I am having a web server mail server Mysql and name server on single machine my os is CentOs 5.2 and desktop gnome everything was working fine now couple of days back I was using text editor, Fire Fox and GIMP at a time and my mouse started to act funny as well as very slow even my keyboard curser moves very slow I feel it is some sort of memory problem but I have noticed the servers are accessible from outside of network are fine except that I am only facing problem while using desk top. Secondly if I reboot the system it start to work fine for few hours. I shall highly appreciate if someone can give me a hint or how to fix it. Thank you.

3 3

Spacewalk client centos 4
by Per Qvindesland 10 Mar '09

10 Mar '09

Hi List Does anyone have any good way to configure centos 4 machines for Spacewalk? Kind regards Per Qvindesland

2 1

IPv6 under Centos?
by Timothy Murphy 10 Mar '09

10 Mar '09

I wonder if anyone is running IPv6 under Centos-5.2? Particularly with shorewall? I see that shorewall6 is specifically designed for updating shorewall to IPv6, as described in <http://www.shorewall.net/IPv6Support.html>. Unfortunately, this explicity requires kernel 2.6.25 or later, and iptables 1.4.0 or later, both of which are later than any versions I've seen on a Centos repository. I'm wondering how safe it would be to install Fedora versions of the required kernel and iptables? Or is there any alternative to shorewall that is IPv6 compatible? I don't really want to run iptables directly, unless forced to do so, as I have found shorewall very reliable and simple to configure. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

3 3

rm user:group
by Matt 10 Mar '09

10 Mar '09

I want to remove files but only if they are owned by a certain user and group. Basically I have this: find /var/spool/greylist -mmin +363 -exec rm -f {} \; I want to make sure it only deletes files owned by mail. Basically no matter what weird characters are in the file names I want to make sure it does not delete anything outside of /var/spool/greylist. I can add 'sudo -u' to it but then my secure log gets filled with entries but perhaps thats the only way to do it. Matt

5 4

Re: [CentOS] Clonezilla SE with CentOS5
by Toby Bluhm 10 Mar '09

10 Mar '09

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something about it > in the running-Clonezilla-with-CentOS-context, be it recommendations, > gotchas', warnings or whatever? > Works nicely for my only purpose - Windows backup. Installs like an appliance - it will stomp on several config files without warning. Best to try it out on a test box or virtual machine. Had to sort through many small scripts to get it to do what I wanted. Main ones I edited were /opt/drbl/sbin/ocs-functions, /opt/drbl/lang/bash/en_US, /tftpboot/nbi_img/pxelinux.cfg/default. Use only one network, shut off nis master, made it a secondary dhcpd server, NFS mount the image storage point off another box. The logger service /opt/drbl/sbin/ocsmgrd didn't work the way I liked, so I use cobbled something together using nc. Because I changed around some files, I have to be careful with drbl/clonezilla updates. I found it useful to have spare disk/LVM space on the server to restore images to, easier restore of a single file or dir. Needs to be equal/larger than the biggest client disk. I had to move it from an x86_64 to i386 Centos - not all my client cpus could run 64bit. PXE boot other stuff like systemrescue, C5 install/rescue, DBAN, etc. I never posted anything, but Steven Shiau, the maintainer, seems responsive to questions on the mail list. -- tkb

2 1

Re: [CentOS] Clonezilla SE with CentOS5
by Michael Peterson 10 Mar '09

10 Mar '09

Sorin Srbu wrote: >> -----Original Message----- >> From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On >> > Behalf > >> Of Les Mikesell >> Sent: Monday, March 09, 2009 2:50 PM >> To: CentOS mailing list >> Subject: Re: [CentOS] Clonezilla SE with CentOS5 >> >> >>> Does anybody on this list use this solution and can say something about >>> > it > >>> in the running-Clonezilla-with-CentOS-context, be it recommendations, >>> gotchas', warnings or whatever? >>> >> I'm using it installed via yum on Centos and it works great. I use a >> 2-NIC server where machines are normally plugged into the private side >> in a lab to be imaged via PXE booting but it also works to use a >> clonezilla-live CD boot anywhere on the network to save or restore. >> > > Thanks Les and Thomas. I appreciate the feedback. I'll look into installing > this solution. > > I'm currently using a g4u-based routine with an ftp-server running of off a > Win2k3-machine+dhcp. It works, but is slightly awkward to use. Clonezilla > seems a bit more worked-on compared and more of a complete solution. > > Thanks. > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > Please let us know how it works for you. I did not know that you could install it on CentOS. I just started looking at it lately and can not get the live CD to work on new or old hardware. I have used PartImage and hoped it would be easier to use but no luck even getting it up to test yet. Glad to read that someone has gotten it to work.

3 2

need help with keyring
by Michael Klinosky 10 Mar '09

10 Mar '09

I should mention that I'm a total newbie with keyrings! I tried searching for help sites - found 1, but I still have a problem. If there is a website (or sites) that explain this, please post it (them)! Ok, so I have a laptop with wifi, running CentOS 5.2. When I boot it, it finds the nearby wifi signals, and tries to connect to mine. To do this, it puts up a window to get my default keyring password. Perhaps I needed to config something? Anyway, I found http://fedoraproject.org/wiki/Tools/NetworkManager , which _seems_ to explain everything. However, my newbie-ness is interfering with this process. NB - I use gnome. The problem is that it's still asking for the default password. I'm fairly sure that I didn't *complete* that process (one issue - that password is different from my user password.) It states that I need (?) to change the keyring password to be the same as the user password - but I can't figure out how. The last sentence: (Using gnome-keyring-manager), "highlight the keyring and select Change Keyring Password from the Keyring menu of gnome-keyring-manager. I don't have 'Change' anything there - whether as $ or #. What do I need to do to satisfy it (so that it doesn't ask for the password)?

2 1

freetype-freeworld?
by Frank Cox 10 Mar '09

10 Mar '09

Is there a Centos equivalent to the Fedora freetype-freeworld? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

Identical yum configs, different results
by Rob Hutten 09 Mar '09

09 Mar '09

Hi all, I have two new Centos 5.2 servers ("drizzle" and "fog"), both ROCKS headnodes installed from the same rolls. Identical `uname -a' output (2.6.18-92.1.13.el5, x86_64 etc), identical yum versions (Version: 3.2.8 Release: 9.el5.centos.1) with identical yum.conf files and identical repo files in /etc/yum.repos.d. To simplify things I've disabled all repos except the centos base on both servers: [base] name=CentOS-$releasever - Base mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 Octave is installed on drizzle: drizzle(a)/etc/yum.repos.d# yum info octave Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * centosplus: mirrors.portafixe.com * base: mirrors.portafixe.com * updates: mirrors.portafixe.com * extras: mirrors.portafixe.com * addons: mirrors.portafixe.com centosplus 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 Installed Packages Name : octave Arch : x86_64 Epoch : 6 Version: 3.0.1 Release: 2.el5 Size : 33 M Repo : installed Summary: A high-level language for numerical computations Description: [etc...] And I'd like to install it on fog; however: [root@fog yum.repos.d]# yum info octave Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * base: mirrors.portafixe.com * updates: mirrors.portafixe.com * centosplus: mirrors.portafixe.com * addons: mirrors.portafixe.com * extras: mirrors.portafixe.com Error: No matching Packages to list [root@fog yum.repos.d]# "yum install octave" gives the same error. Any idea what I'm missing? I'm sure it's something stupid but I've been banging my head against the wall all evening on this... Thanks, -Rob Rob Hutten Senior HPC Engineer Flagstone RE Suite 700, Cogswell Tower 2000 Barrington Street Halifax, Nova Scotia B3J 3K1 www.flagstonere.bm ********************************************************************** This communication contains information which is confidential and may also be legally privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s), disclosure, copying, distribution, or other use of, or action taken or omitted to be taken in reliance upon, this communication or the information in it is prohibited and maybe unlawful. If you have received this communication in error please notify the sender by return email, delete it from your system and destroy any copies. **********************************************************************

3 3

usb mouse config
by Michael Klinosky 09 Mar '09

09 Mar '09

Hello. I have 5.2 running nicely on my Aspire laptop. It has a 'mousepad' (which I don't like), so I put a usb mouse on it. It works properly, but I (apparently) can't change the motion (in Preferences > Mouse, Motion tab). Any setting for the Acceleration and Sensitivity don't affect the motion. Do I have to config something somewhere else?

1 0

Re: [CentOS] Memory vs. Display Card
by Rick 09 Mar '09

09 Mar '09

In article <12768.4492654682$1236586039(a)news.gmane.org>, Sorin Srbu <centos(a)centos.org> wrote: >If the motherboard supports dual-channel configs, one might want to take care >how one distributes the different mem-sticks in the banks. Eg the 2GB-sticks >in bank 1 and 3 and the 4GB-sticks in banks 2 and 4. Well, yeah, of course. But even if I got that wrong, the 4GB alone did not work in the same slots the 2GB sticks were in.

6 6

Grub Loading stage2Read Error
by dnk 09 Mar '09

09 Mar '09

Hi there, I had a system drop this weekend, and upon boot, the system halts at a black screen with the following error: "Grub Loading stage2Read Error" Now upon googling around, it seems to be recommended to reinstall GRUB. My system is a simple raid 0 (data backed up), with the typical partition scheme (LVM, etc) provided by CentOS. This system is 5.2 in my case. Now since my system is a raid 0, I am a little hesitant to do the procedure as none of the instructions I have found take this into consideration. What would be the best way to do this, or more importantly to find out the proper device to run (on): /sbin/grub-install /dev/... Thanks in advance. d

1 1

[bug] Perl Performance Issue
by Georg Grabler 09 Mar '09

09 Mar '09

Hello, I'm currently bitten hard by a bug which was introduced by RedHat in their perl releases. This bug has been fixed "recently", to be true in January, by RedHat. The bug I'm talking about is a performance issue, which is caused by overloading blessed functions: http://bugs.centos.org/view.php?id=2357 The bug fix (January 2009): http://rhn.redhat.com/errata/RHBA-2009-0117.html claims to fix 379791 <http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=379791> - perl bless/overload performance problem I wanted to ask if we can expect CentOS to release a new version of perl soon, or if we should rather tend building our own packages. I'd prefer the CentOS update, due to the reason that I don't know if we'll have the same problems with this in mod_perl as well. Kind regards, Georg

2 1

Re: [CentOS] Clonezilla SE with CentOS5
by Les Mikesell 09 Mar '09

09 Mar '09

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something about it > in the running-Clonezilla-with-CentOS-context, be it recommendations, > gotchas', warnings or whatever? I'm using it installed via yum on Centos and it works great. I use a 2-NIC server where machines are normally plugged into the private side in a lab to be imaged via PXE booting but it also works to use a clonezilla-live CD boot anywhere on the network to save or restore. -- Les Mikesell lesmikesell(a)gmail.com

2 1

Re: [CentOS] Clonezilla SE with CentOS5
by Thomas Johansson 09 Mar '09

09 Mar '09

Sorin Srbu wrote: > Hi all, > > I'm looking for a cloning solution for our Windows/Linux/*nix computer park > and ran into Clonezilla. Apparantely the DRBL and other documentation > mentions CentOS as a suitable base for it. > > Does anybody on this list use this solution and can say something about it > in the running-Clonezilla-with-CentOS-context, be it recommendations, > gotchas', warnings or whatever? > Hi We have a standalone network cloning laptops using clonezilla. The person using it says it does what it is supposed to. The install was pretty much by the instructions on the webpage. The computer we use have an extra NIC for a private clone network. We also installed an extra HDD 500GB for clone image storage. What i did was pretty much; 1. Configure nic on eth1 to 192.168.100.1 2. Add packages dkms dkms-fuse dkms-ntfs3g dkms-ntfs fuse-ntfs-3g-devel fuse-ntfs-3g * /yum install dkms dkms-fuse dkms-ntfs3g dkms-ntfs fuse-ntfs-3g-devel fuse-ntfs-3g/ 3. /Modify ///etc/sysconfig/iptables/ according to Clonezilla server firewall <https://sysadm.isy.liu.se/wiki/pmwiki.php/Main/ClonezillaFirewall> 4. Install Clonezilla following Clonezilla server install <http://drbl.sourceforge.net/one4all/> 5. Configure the server according to the webpage Regards Thomas

1 0

Nfs4 with kerberos freezing system
by Olaf Mueller 09 Mar '09

09 Mar '09

Hello, I have a CentOS 5.2 server that exports /home on the local network for 2 users by secure nfs4 with kerberos krb5p. The clients are a notebook and a desktop pc. The following error is always reproducible on all clients. If running the clients on high load, that means for example 5 firefox windows open and connected with www pages from the internet, installing the new qt development environmet on the nfs4 share from the 297 mb big qt-sdk-linux-x86-opensource-2009.01.bin file and copy a 649 mb iso image to the nfs4 share, the client is freenzing and a reboot is necessary. If running the clients on low load, than the system is stable for hours. In my opinion this is an error by an CentOS nfs package, cause this problem is reproducible with different kernels, different desktop environments and different clients. I don't think the error is caused by the server hardware, cause if running the same nfs setting with nfs version 3 and disabling nfs secure, the system is stable. I have test this with - latest CentOS 5.2 kernel and testing redhat kernel 2.6.18-133.el5 - kde and gnome - different clients and hardware Is anybody here successfully using nfs4/krb5p with CentOS 5.2? regards Olaf

2 2

hplip problems - configure: error: "cannot find libjpeg support"
by Anne Wilson 09 Mar '09

09 Mar '09

I'm trying to get hplip-2.7.12 installed, and I'm reasonably sure that I had it installed on this box before my problems last month. Anyway, it will not build at the moment. It stops the Configure with "configure: error: "cannot find libjpeg support". However, Package libjpeg - 6b-37.i386 is already installed. Similarly, attempting to install hplip-3.9.2 stops with warning: Missing REQUIRED dependency: libusb but Package libusb - 0.1.12-5.1.i386 is already installed. Version 2.7.12 is the earliest version to support my printer. I'm fairly sure I had it installed on this box before my problems last month, and I'm fairly sure that it also was installed on FC6 some time back. Either of these versions would be fine. Any ideas? Anne

4 6

Clonezilla SE with CentOS5
by Sorin Srbu 09 Mar '09

09 Mar '09

Hi all, I'm looking for a cloning solution for our Windows/Linux/*nix computer park and ran into Clonezilla. Apparantely the DRBL and other documentation mentions CentOS as a suitable base for it. Does anybody on this list use this solution and can say something about it in the running-Clonezilla-with-CentOS-context, be it recommendations, gotchas', warnings or whatever? Thanks. -- BW, Sorin ----------------------------------------------------------- # Sorin Srbu [Sysadmin, Systems Engineer] # Dept of Medicinal Chemistry, Phone: +46 (0)18-4714482 >3 signals> GSM # Div of Org Pharm Chem, Mobile: +46 (0)701-718023 # Box 574, Uppsala University, Fax: +46 (0)18-4714482 # SE-751 23 Uppsala, Sweden Visit: BMC, Husargatan 3, D5:512b # Web: http://www.orgfarm.uu.se ----------------------------------------------------------- # () ASCII ribbon campaign - Against html E-mail # /\ # # MotD follows: # CentOS: The OS Maker!

1 0

LDAP proxy
by Test 09 Mar '09

09 Mar '09

List, I have a challenge with some LDAP servers: I am in the process of converting from physical LDBM backends to virtualized BDB backends. Problem is that there are a lot of clients connecting to this ldap instance (with updates), so i do not want to inform them that our ldap server is offline for a maintenance window... I would like to have a solution which does some form of caching until the new instances are online and then flush the updates to the new instance.. Does anyone have a clue on how to do this, or a better solution to my problem ?

1 0

whither mplayerplug-in?
by Frank Cox 09 Mar '09

09 Mar '09

I have rpmfusion set up, but yum tells me that mplayerplug-in is not available. Has it been replaced by something else? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss