- Discuss - lists.centos.org

Re: [CentOS] I have a test system that hangs hard...
by David G. Miller 07 Mar '09

07 Mar '09

Robert Moskowitz <rgm(a)htt-consult.com> wrote: See embedded comments. I'm not familiar with the specific package mentioned but these are just a few standard debugging ideas. > I have a test system: Centos 5.2 on an OQO, that has been hanging > hard. I have to unplug it and pull the battery so I can then cold start it. > I assume this also means that the system runs as expected if you don't take any of the actions described below. > This last time all I did was open a terminal window and SU to root, then > start the lastest build of SIP Communicator (which uses JRE 1.6.0_10). > I was not even making a test phone call at the time. Any chance of trying an earlier version? Especially one that uses an earlier JRE? > Oh, and the system > only runs IPv6, no v4 addressing. > And what happens if you enable IPV4? If possible, can SIP Communicator be configured to use IPV4 instead of V6? If so, does the problem persist? > So how do I find out what is causing the hard lockups? > I'd start with enabling IPV4 addressing since it's fairly trivial to do and then work back toward running an earlier version of the program. You may find something like the JRE wants an IPV4 connection (just wildly speculating here). Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

CentOS-announce Digest, Vol 49, Issue 3
by centos-announce-request＠centos.org 07 Mar '09

07 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0340 Moderate CentOS 3 s390(x) libpng - security update (Pasi Pirhonen) 2. CESA-2009:0313 Moderate CentOS 3 s390(x) wireshark - security update (Pasi Pirhonen) 3. CESA-2009:0315 Critical CentOS 4 i386 firefox - security update (Tru Huynh) 4. CESA-2009:0315 Critical CentOS 4 x86_64 firefox - security update (Tru Huynh) 5. CESA-2009:0325 Critical CentOS 4 i386 seamonkey - security update (Tru Huynh) 6. CESA-2009:0325 Critical CentOS 4 x86_64 seamonkey - security update (Tru Huynh) 7. CESA-2009:0315 Critical CentOS 4 ia64 firefox - security update (Pasi Pirhonen) 8. CESA-2009:0325 Critical CentOS 4 ia64 seamonkey - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 6 Mar 2009 18:43:39 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0340 Moderate CentOS 3 s390(x) libpng - security update To: centos-announce(a)centos.org Message-ID: <20090306164339.GF23300(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0340 https://rhn.redhat.com/errata/RHSA-2009-0340.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/libpng-1.2.2-29.s390.rpm updates/s390/RPMS/libpng-devel-1.2.2-29.s390.rpm updates/s390/RPMS/libpng10-1.0.13-20.s390.rpm updates/s390/RPMS/libpng10-devel-1.0.13-20.s390.rpm s390x: updates/s390x/RPMS/libpng-1.2.2-29.s390x.rpm updates/s390x/RPMS/libpng-devel-1.2.2-29.s390x.rpm updates/s390x/RPMS/libpng10-1.0.13-20.s390x.rpm updates/s390x/RPMS/libpng10-devel-1.0.13-20.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Easiest way to get samba up and working for Windows users?
by Noob Centos Admin 07 Mar '09

07 Mar '09

Everytime I have to setup samba to handle Windows users, sometime inadvertently goes wrong or doesn't work the way I expected, or takes forever to setup, especially when there are many users and various policies. So far, the easiest, sureest and quickest method appears to be install WindowsXP into VMWare and use it to handle Windows sharing. Needless to say, this strucks me as rather ironic and stupid. Thus could anybody please suggest a working frontend to samba that makes it easy to add users, set their permissions and get something that works like basic windows file sharing? So far I've tried the following which all don't quite work. 1. CentOS's samba configuration tool - added users never show up on the share configuration so the only shares it could create was for public access. 2. Webmin - thinks it added the users, but again they never show up when checked against the bundled CentOS tool and needless to say, the shares never work too 3. Samba SWAT - Very confusing tool, selecting shares sometimes end up as another share, and again, doesn't seem to work. So I just need a very basic tool that will reliably allow me to do the following - specify user name, specify password, and maybe specify a group - specify a share the user or group has read only or read/write access - force new files/folders to take on group ID so that it behaves like a normal windows share Don't need print services or anything, it's just far easier to dump a hardware print server into the network than to contemplate the additional complexity of making something like CUPS work. Just need to make sure that the Windows users can browse to the folders, get a prompt for their login and password where needed. Thanks!

7 28

compatibility dell]
by root＠zoioroxo.com.br 06 Mar '09

06 Mar '09

The systems will be operating the Center 5.2 32-bit, below the model, one will doubt that the system of controlling the media to do a RAID 0+1 PowerEdge SC1435 Processor AMD Opteron 2344HE Quad Core (1.7 GHz, 4x512 KB L2 cache, 1 GHz HyperTransport) - BRH8835 edit Memory 8GB Memory, 667MHz (4x2GB), Single Ranked Primary controller Integrated SATA Controller - No RAID edit First Hard Drive SAS Hard Disk Drive of 73GB, 3.5 inch, 15K RPM Second Hard Drive SAS Hard Disk Drive of 73GB, 3.5 inch, 15K RPM Card Network Card Network On-Board Dual Gigabit, Riser Card Riser Card with 1-slot PCIe X8 ---------------------------- Original Message ---------------------------- Subject: Re: [CentOS] compatibility dell From: "Lanny Marcus" <lmmailinglists(a)gmail.com> Date: Fri, March 6, 2009 12:15 pm To: "CentOS mailing list" <centos(a)centos.org> -------------------------------------------------------------------------- On 3/6/09, root(a)zoioroxo.com.br <root(a)zoioroxo.com.br> wrote: > What I say this as the compatibility of the system with hundreds dell > server, this is 100% with ADM processors, or not: Do you have a particular Dell Server in mind? What version of CentOS? 32 bit or 64 bit? ¿Tiene un Servidor de Dell? ¿Que modelo? Reply with more information in English and hopefully someone on the list can help you. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

3 2

programs with no man pages?
by Les Mikesell 06 Mar '09

06 Mar '09

I accidentally typed ss instead of ls and was surprised when it did something... I can use rpm's --whatprovides to see where it came from, but how are you supposed to find out want a program does when it doesn't have a man page? -- Les Mikesell lesmikesell(a)gmail.com

8 12

compile driver before X starts
by Jerry Geis 06 Mar '09

06 Mar '09

hi all is there a way/method to compile an X11 driver at boot before X starts??? Seems like the ATI catalyst driver (after a kernel change) does not start correctly and locks up the box I need to recompile the driver after udev and before X. How is this done? Jerry

6 8

epel-5.2 trying to upgrade to 5.3
by Marcelo M. Garcia 06 Mar '09

06 Mar '09

Hi I just installed CentOS 5.2 (x86_64), and everything was fine. After installing the "epel-release-5-2.noarch.rpm", and issuing "yum check-update", I can see that "epel" is trying to upgrade to version 5.3. First I didn't notice the problem, and after upgrading, I got the message "error sumary" when updating the system. It seems that the x86 (32bit) version is working fine. Does anybody else having similar problem? Thanks Marcelo

4 3

Re: [CentOS] WAY OT: domain name registration .co.za
by Glenn 06 Mar '09

06 Mar '09

At 12:01 PM 3/6/2009, you wrote: >2009/3/6 Bill Campbell <centos(a)celestial.com> > > > > On Fri, Mar 06, 2009, Glenn wrote: > > >Hello All, > > > > > >Very sorry about WAY off-topic query, but you folks really are one of > > >my most International subscribed groups. > > > > > >I am looking for a recommendation for a domain name registrar I can > > >register my .co.za domain name with that won't 'yank my chains'. I > > >tried a couple attempts at registering and found some hidden fees > > >along with the insistence that I had to host my DNS with them. Lots > > >of hosting bundles! > > > > > >I just want a registrar that can register the domain name and use MY > > >DNS servers. I'll do all the hosting, thank you very much! > >Hi Bill. >Have you tried registering your domain directly with the registrar? > >( http://co.za/coza_reg.txt ) > >Regards, > Andrew Thanks All! Again sorry about the OT!!! Cheers, Glenn

1 0

CentOS-announce Digest, Vol 49, Issue 2
by centos-announce-request＠centos.org 06 Mar '09

06 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0333 Moderate CentOS 4 ia64 libpng - security update (Pasi Pirhonen) 2. CESA-2009:0313 Moderate CentOS 4 ia64 wireshark - security update (Pasi Pirhonen) 3. CESA-2009:0325 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) 4. CESA-2009:0340 Moderate CentOS 3 ia64 libpng - security update (Pasi Pirhonen) 5. CESA-2009:0313 Moderate CentOS 3 ia64 wireshark - security update (Pasi Pirhonen) 6. CESA-2009:0333 Moderate CentOS 4 s390(x) libpng - security update (Pasi Pirhonen) 7. CESA-2009:0313 Moderate CentOS 4 s390(x) wireshark - security update (Pasi Pirhonen) 8. CESA-2009:0325 Critical CentOS 3 s390(x) seamonkey - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Thu, 5 Mar 2009 20:16:07 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0333 Moderate CentOS 4 ia64 libpng - security update To: centos-announce(a)centos.org Message-ID: <20090305181607.GA22109(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0333 https://rhn.redhat.com/errata/RHSA-2009-0333.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/libpng-1.2.7-3.c4.2.ia64.rpm updates/ia64/RPMS/libpng-devel-1.2.7-3.c4.2.ia64.rpm updates/ia64/RPMS/libpng10-1.0.16-3.c4.3.ia64.rpm updates/ia64/RPMS/libpng10-devel-1.0.16-3.c4.3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Question about priorities
by Marcelo M. Garcia 06 Mar '09

06 Mar '09

Hi When adding priority to a repo, like rpmforge or epel, is it better to give the same priority or can give different priority to different repos, ranking them? thanks Marcelo

3 2

general protection rip?
by J Potter 06 Mar '09

06 Mar '09

Hi List, On one of our CentOS 5 (x64_86) servers, identical to a number of other systems, I'm seeing some processes / services failing to run, along with the following error in /var/log/messages: Mar 2 23:25:07 someHostname kernel: wrapper-linux-x[24448] general protection rip:805386e rsp:ffc20390 error:0 Mar 2 23:25:09 someHostname kernel: dsm_sa_datamgr3[5063] general protection rip:f7f86e7c rsp:f5aab30c error:0 Mar 3 09:57:54 someHostname kernel: dcecfg32[1993] general protection rip:b9c71a rsp:ffa20568 error:0 Mar 6 09:38:59 someHostname kernel: omreport[15107] general protection rip:af597a rsp:ffdccad0 error:0 I've Googled a bit, but don't see any clear consistent explanation. Does anyone have any pointers as to what is causing this? Faulty hardware? I ran memtester, but it didn't find any issue with the memory it was able to test. Thanks, Jeff

2 1

compatibility dell
by root＠zoioroxo.com.br 06 Mar '09

06 Mar '09

What I say this as the compatibility of the system with hundreds dell server, this is 100% with ADM processors, or not:

2 2

problems with acl permissions changing ownership
by Gerhardus.Geldenhuis＠gta-travel.com 06 Mar '09

06 Mar '09

Hi I am trying to get a non privileged user to update config files for apache httpd and have attempted the following: I have set the following permissions: setfacl -m user:deployer:--x /etc/httpd setfacl -R -m u:deployer:rwx,o::--- /etc/httpd/conf.d setfacl -R -m u:deployer:rwx,o::--- /etc/httpd/conf I then have a script that is run as the deployer user to checkout config files from svn and copies it to /etc/httpd directory in the following way: cd /tmp/versioned-config; cp -Rfp --backup --suffix=.$(date +%F_%T) apache/etc/ / However when I do that the ownership of the config files changes to deployer.deployer and it looses the special permissions... How can I prevent changing of ownership? The setfacl man page suggest the use of the -p flag to preserve permissions. Should I be using ACL's? Is there a better way of doing this? The --backup flag also complicates matters and I am considering getting rid of it. Regards ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________

2 1

Centos 5.x SElinux issues
by Chuck Campbell 06 Mar '09

06 Mar '09

I did a complete clean install of CentOS 5 from CD yesterday. I took the default selinux configuration. After that I ran yum update and found 600 plus updates and installs. I let it go to do the updates and during that process I saw a large number of issues in the selinux troubleshooter. I also see these kinds of things in /var/log/messages: **Unmatched Entries** (Only first 10 out of 49031 are printed) audit: audit_backlog=262 > audit_backlog_limit=256 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256 audit: backlog limit exceeded audit: audit_backlog=262 > audit_backlog_limit=256 audit: audit_lost=2 audit_rate_limit=0 audit_backlog_limit=256 audit: backlog limit exceeded . . . This makes me wonder if I've now got a corrupt system because of partial installs/upgrades on a number of packages ? Do I need to start over with a clean install again, and how do I avoid this problem the next time I try to run updates after the install? thanks, -chuck -- ACCEL Services, Inc.| Specialists in Gravity, Magnetics | (713)993-0671 ph. | and Integrated Interpretation | (713)993-0608 fax 633 1/2 W. 21st St.| Since 1992 | (713)306-5794 cell Houston, TX, 77008 | Chuck Campbell | campbell(a)accelinc.com | President & Senior Geoscientist | "Integration means more than having all the maps at the same scale!"

7 8

SELinux resource hog
by Noob Centos Admin 06 Mar '09

06 Mar '09

Spinning off from the other thread about SELinux, I just tried to re-enable SELinux on my personal server hosting just email and forum for a small local community. Average load for this Intel Core 2 Duo box with 2GB of ram (usually with some 1GB free) was generally below 0.4 for the last 24hrs, averaging 0.23 based on MRTG. Once I did setenforce 1, load shot through the roof to fluctuate between 3 to 5. As per my past experience setroubleshootd started chewing up ram more than 600M and 500M worth of virt and res based on top. The server started crawling and php apps stopped communicating with mysql. I had to kill setroubleshootd in order to return things to normal. This again reflects my original experience with SELinux: massive resource hog and this is just a lowly loaded webserver. Naturally it seems to me that this doesn't seem like it should be the norm. What could be going on here or rather what could be wrong here?

3 3

How to setup a "secondary DNS server" pulling zones from Win2k3?
by Alexander Farber 06 Mar '09

06 Mar '09

Hello, we have a mixed environment at work: CentOS + Win2003 servers. The Win2k3 part contains: AD, DNS (inlc. dyndns), DHCP, DFS, Exchange. The CentOS part: NIS passwords + also a DNS server. So currently we have to update the Linux DNS server zone infos by hand: I export a text file from Windows DNS server and then edit it around using vim. On the Windows side however it's easy for me to setup additional DNS servers at other machines: I just configure them as "secondary" and they pull zone infos automatically. I wonder if there is a way to setup such a "secondary" DNS server under CentOS as well? And no, I'm not asking about how to setup a DNS-forwarder. (Because I want the Linux server to pull and maintain zone infos automatically and to work even if Windows-counterpart is down.) Regards Alex

4 7

CentOS 5 for IA64
by Nigel Kendrick 06 Mar '09

06 Mar '09

Can anyone with a well-connected crystal ball suggest a timeframe for an IA64 release of CentOS 5? Weeks? Months? Never? Thanks Nigel Kendrick

6 6

32 or 64 bit (4 gb ram)
by Dnk 05 Mar '09

05 Mar '09

Is there any real advantage to using 64 bit when I am right at the 4gb ram threshhold? Nice plans to add more ram. The machine will just be a backup machie (rsync). Thanks in advance. D

10 15

HPLIP 3.9.2
by Roger Wells 05 Mar '09

05 Mar '09

on Centos 5.2 2.6.18-92.1.22.el5.centos.plus Has anyone gotten HPLIP 3.9.2 to work? If so what was done about python-dbus and PyQt4-dbus? They don't seem to included after installing PyQt4-4.4, sip 4.4.5, and hplip 3.9.2. thanks, roger wells -- Roger Wells, P.E. SAIC 221 Third St Newport, RI 02840 401-847-4210 (voice) 401-849-1585 (fax) roger.k.wells(a)saic.com

3 6

CentOS-announce Digest, Vol 49, Issue 1
by centos-announce-request＠centos.org 05 Mar '09

05 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0340 Moderate CentOS 3 i386 libpng - security update (Tru Huynh) 2. CESA-2009:0340 Moderate CentOS 3 x86_64 libpng - security update (Tru Huynh) 3. CESA-2009:0313 Moderate CentOS 3 i386 wireshark - security update (Tru Huynh) 4. CESA-2009:0313 Moderate CentOS 3 x86_64 wireshark - security update (Tru Huynh) 5. CESA-2009:0325 Critical CentOS 3 i386 seamonkey - security update (Tru Huynh) 6. CESA-2009:0325 Critical CentOS 3 x86_64 seamonkey - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 5 Mar 2009 00:31:04 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2009:0340 Moderate CentOS 3 i386 libpng - security update To: centos-announce(a)centos.org Message-ID: <20090304233104.GA30918(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2009:0340 libpng security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2009-0340.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/libpng10-1.0.13-20.i386.rpm updates/i386/RPMS/libpng10-devel-1.0.13-20.i386.rpm updates/i386/RPMS/libpng-1.2.2-29.i386.rpm updates/i386/RPMS/libpng-devel-1.2.2-29.i386.rpm source: updates/SRPMS/libpng10-1.0.13-20.src.rpm updates/SRPMS/libpng-1.2.2-29.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update libpng\* Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

gnet-2.0, gio-2.0
by Ondrej Filip 05 Mar '09

05 Mar '09

I asked on Saturday and I didn't get reply. I'm trying again. I'm porting one project to centos where we use gnet and gio libraries. Will be these libraries part of centos in future? I'm not sure what relationship is between these libraries and glib. Regards Ondrej Filip

4 5

Errors using custom install disk
by John Kennedy 05 Mar '09

05 Mar '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 (Sorry if this is a dupe. Sent originally from unregistered email address) All, I am trying to make a custom install CD for CentOS 5.2. I am building the iso in a VirtualBox image and testing the iso in another VirtualBox image so I don't keep wasting CD's. I have gotten to where all the package dependencies are met and now I get the following error on boot: An error occurred unmounting the CD. Please make sure you're not accessing /mnt/source from the shell on tty2 and then click OK to retry This scrolls rapidly up the screen (doing text install) and there is no "OK" button. I have seen that there is a bug about this dated 2006 at: https://bugzilla.redhat.com/show_bug.cgi?id=206352 But that was closed in November 2007 so it SHOULD be fixed in the iso I am trying. I also read in a forum that the CD "drive was going into some sort of "sleep" mode which the install couldn't overcome." The solution for this person was to <Ctrl> <Alt> <F2> and in the new session do an ls on /mnt/sort every few seconds. Since this needs to be as unattended an install as possible, that wouldn't work even if I could get to the second console. Any ideas? Thanks, John -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkmuQpcACgkQh55XlAYb/QjjgQCbBLsl31LK9OdB+cTR1iDCLSnU bS8AoJpbOW6s1vwMJsS9oSYzI+2hrcEj =GVZY -----END PGP SIGNATURE-----

2 1

Yum security plugin
by MOKRANI Rachid 05 Mar '09

05 Mar '09

Hi, On CentOS 5.2 x86_64 (2.6.18-92) the yum security plugin seem to not working. If I try "yum update --security" nothing is done. Is there something to configure ? All the following packages are installed on my system. yum.noarch 3.2.8-9.el5.centos.2.1 installed yum-aliases.noarch 1.1.10-9.el5.centos installed yum-allowdowngrade.noarch 1.1.10-9.el5.centos installed yum-basearchonly.noarch 1.1.10-9.el5.centos installed yum-changelog.noarch 1.1.10-9.el5.centos installed yum-downloadonly.noarch 1.1.10-9.el5.centos installed yum-fastestmirror.noarch 1.1.10-9.el5.centos installed yum-filter-data.noarch 1.1.10-9.el5.centos installed yum-kernel-module.noarch 1.1.10-9.el5.centos installed yum-kmod.noarch 1.1.10-9.el5.centos installed yum-list-data.noarch 1.1.10-9.el5.centos installed yum-merge-conf.noarch 1.1.10-9.el5.centos installed yum-metadata-parser.x86_64 1.1.2-2.el5 installed yum-priorities.noarch 1.1.10-9.el5.centos installed yum-protect-packages.noarch 1.1.10-9.el5.centos installed yum-protectbase.noarch 1.1.10-9.el5.centos installed yum-refresh-updatesd.noarch 1.1.10-9.el5.centos installed yum-security.noarch 1.1.10-9.el5.centos installed yum-skip-broken.noarch 1.1.10-9.el5.centos installed yum-tsflags.noarch 1.1.10-9.el5.centos installed yum-updateonboot.noarch 1.1.10-9.el5.centos installed yum-updatesd.noarch 1:0.9-2.el5 installed yum-upgrade-helper.noarch 1.1.10-9.el5.centos installed yum-utils.noarch 1.1.10-9.el5.centos installed yum-versionlock.noarch 1.1.10-9.el5.centos installed Regards. __________________________ Ce message (et toutes ses pièces jointes éventuelles) est confidentiel et établi à l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme à sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'IFP décline toute responsabilité au titre de ce message. This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. IFP should not be liable for this message. Visitez notre site Web / Visit our web site : http://www.ifp.fr __________________________

3 3

Should I be worried?
by Todd Cary 05 Mar '09

05 Mar '09

When doing my updates, I got this message: error: unpacking of archive failed on file /boot/System.map-2.6.9-78.0. 13.EL;49a Unfortunately, I installed Centos 4 about two years ago on my server that sits in the corner and does it's job of faithfully providing services without me touching it except to run a backup script and do a YUM update every week so. The result is that I have forgotten my Linux know how! Help! Todd -- Ariste Software Petaluma, CA 94952 http://www.toddcary.com/aristephotography/

8 10

head scratcher update
by Craig White 05 Mar '09

05 Mar '09

perhaps my mind isn't working today. I'm trying to update a system that hasn't been updated in a while which I believe is CentOS 5.2 but it's possible that it's 5.1. I am pretty sure that it has php installed from CentOS-Extras and when I do yum update, it's stumbling on php --> Finished Dependency Resolution Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-mysql Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-cli Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-xml Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-ldap Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-imap Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-mbstring Error: Missing Dependency: php-common = 5.1.6-20.el5_2.1 is needed by package php-pdo So I queried rpm to see what's installed... # rpm -qa|grep php php-common-5.1.6-15.el5 php-mysql-5.1.6-15.el5 php-pear-Net-Sieve-1.1.5-2.el5.centos php-mcrypt-5.1.6-15.el5.centos.1 php-pear-MDB2-2.4.1-2.el5.centos php-cli-5.1.6-15.el5 php-5.1.6-15.el5 php-pear-Net-SMTP-1.2.10-1.el5.centos php-pear-Date-1.4.7-2.el5.centos php-pear-HTTP-Request-1.4.2-1.el5.centos php-pear-1.4.9-4 php-pear-Mail-Mime-1.4.0-1.el5.centos php-xml-5.1.6-15.el5 php-pecl-memcache-2.2.1-1.el5.centos php-pdo-5.1.6-15.el5 php-pear-Net-Socket-1.0.8-1.el5.centos php-pear-Mail-1.1.14-1.el5.centos php-pear-Net-URL-1.0.15-1.el5.centos php-pear-File-1.2.2-1.el5.centos php-pecl-Fileinfo-1.0.4-3.el5.centos php-pear-DB-1.7.13-1.el5.centos php-ldap-5.1.6-15.el5 php-pear-Auth-SASL-1.0.2-4.el5.centos php-mbstring-5.1.6-15.el5 php-imap-5.1.6-15.el5 php-pear-Log-1.9.13-1.el5.centos and I suppose I could yum remove php and reinstall but that seems rather drastic, plus, I have horde, etc setup too. Any suggestions? Craig

1 1

Olivier Castien/Roncq/Infofrance/FRA/TZG est absent.
by Olivier_Castien＠zieglergroup.com 04 Mar '09

04 Mar '09

Je serai absent(e) à partir du 04/03/2009 de retour le 09/03/2009. Je répondrai à votre message dès mon retour. En cas d'urgence, vous pouvez contacter l'équipe technique d'infofrance.

1 0

ext3 heavy file fragmentation with NFS write
by Andrzej Szymański 04 Mar '09

04 Mar '09

Hello, Does anybody know how to avoid the file fragmentation when a file is created over NFSv3? A file created locally is OK: dd bs=32k if=/dev/zero of=test count=32x1024 conv=fsync filefrag test test: 10 extents found, perfection would be 9 extents When I create the file in the same dir, but from another machine, mounted over NFS: filefrag test test: 4833 extents found, perfection would be 9 extents With such a file a sequential read is quite slow (~76MB vs >200MB on my raid card). I can just suspect that this is a problem of block allocation when the same file is appended by different processes (8 NFS threads). I've tried mounting ext3 with -o reservation and switch to NFS over TCP, with no improvement. Both systems are Centos 5.2 with kernel 2.6.18-92.1.22.el5 The ext3 is mounted with rw,nosuid,nodev,usrquota,grpquota,acl NFS export: rw,sync,no_root_squash 8 NFS threads. Remotely mounted with options rw,intr,nfsvers=3,proto=udp,rsize=32768,wsize=32768 I would be very grateful for any help. Andrzej

3 3

Centos 5.2 and Adaptec AIC-9410
by Maxim Odinintsev 04 Mar '09

04 Mar '09

Good Day! We have some troubles with installation of CentOS 5.0 on Supermicro server with Adaptec AIC-9410 SAS Controller, but installation complete successfully on CentOS 4.5. This issue has been solved in version 5.2? Or it will be solved in version 5.3? Sorry for my English ;( -- wbr - Maxim Odinintsev

3 4

Why are multiple architecture rpms installed?
by Marten Lehmann 04 Mar '09

04 Mar '09

Hello, I noticed, that whenever I install a package on CentOS 5.x, rpms for multiple architectures are installed: yum install sqlite-devel Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * base: centos.intergenia.de * updates: centos.intergenia.de * addons: centos.intergenia.de * extras: centos.intergenia.de base 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 951 B 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Setting up Install Process Parsing package install arguments Resolving Dependencies --> Running transaction check ---> Package sqlite-devel.x86_64 0:3.3.6-2 set to be updated ---> Package sqlite-devel.i386 0:3.3.6-2 set to be updated --> Finished Dependency Resolution Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: sqlite-devel x86_64 3.3.6-2 base 260 k sqlite-devel i386 3.3.6-2 base 260 k Transaction Summary ============================================================================= Install 2 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 520 k Is this ok [y/N]: y Downloading Packages: (1/2): sqlite-devel-3.3.6 100% |=========================| 260 kB 00:01 (2/2): sqlite-devel-3.3.6 100% |=========================| 260 kB 00:01 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing: sqlite-devel ######################### [1/2] Installing: sqlite-devel ######################### [2/2] Installed: sqlite-devel.x86_64 0:3.3.6-2 sqlite-devel.i386 0:3.3.6-2 Complete! Thats pretty annoying, because an "rpm -qa | grep sqlite" only shows the package name, not the arch: sqlite-3.3.6-2 sqlite-devel-3.3.6-2 sqlite-3.3.6-2 sqlite-devel-3.3.6-2 When I later want to remove rpms, I always have to mention both archs explicitly: rpm -e sqlite-3.3.6-2.i386 rpm -e sqlite-3.3.6-2.x64_86 And sometimes packages have arch i686 as well. Or I get an error: rpm -e sqlite error: "sqlite" specifies multiple packages First I thought, that this might be an issue due to 32bit compatibility. But then I remembered, that I used CentOS 4 on 64bit, too, and there was no such problem. How can I get rid of it? Kind regard Marten

4 3

Need Broadcom 4311 firmware for CentOS 5
by Robert Nichols 04 Mar '09

04 Mar '09

Any hope of getting my laptop's Broadcom BCM94311 wireless running on CentOS 5? I find lots of references to using fwcutter to get the needed firmware from Windows drivers, but there's a Catch-22: Version of fwcutter that generate files for the bcm43xx driver in CentOS 5 don't recognize the md5sum of any currently available Windows driver. Newer versions of fwcutter do recognize my Windows XP driver files, but generate output in a newer format that is not compatible with the bcm43xx driver. I've been searching and fighting this for quite some time. I have a Fedora 10 installation that runs the wireless just fine on that laptop (Lenovo 3000 N200), but I really hate the churn and instability of Fedora. I was hoping that CentOS 5.3 might include a backported b43 driver, but I grabbed a preliminary version of the new kernel (2.6.18-132), and it still has the old bcm43xx.ko driver. -- Bob Nichols "NOSPAM" is really part of my email address. Do NOT delete it.

5 5

Fail2Ban
by Devraj Mukherjee 04 Mar '09

04 Mar '09

Hi all, I am trying to get fail2ban going on my server and its log message reports the following error 2009-02-16 17:42:05,339 ERROR: 'iptables -L INPUT | grep -q fail2ban-SSH' returned 256 2009-02-16 17:42:05,354 ERROR: 'iptables -D INPUT -p tcp --dport ssh -j fail2ban-SSH Is this because of the way the RedHat tool sets up the firewall? Thanks for any responses. -- "The secret impresses no-one, the trick you use it for is everything" - Alfred Borden (The Prestiege)

7 9

Re: [CentOS] (a) WinPower RPM available? (b) where to install if use tar.gz file? [Solved]
by Lanny Marcus 03 Mar '09

03 Mar '09

On Fri, Feb 27, 2009 at 9:51 AM, Lanny Marcus <lmmailinglists(a)gmail.com> wrote: > Two quick and simple questions; I want to install the "WinPower" > software for my new UPS. On their web site, they have a tar.gz file > available for download. I know the reasons for staying with RPM, if at > all possible. I've Googled and Yahood for ""WinPower"+RPM+Linux and > get hits, but no obvious RPM. I tried "yum install winpower" and the > response was "no package winpower available" (rpmforge is one of the > yum repositories I use, so it's not there, with that name). > I read the documentation, again, very slowly..... Their default configuration is not set up to Shutdown the box the UPS is connected to. Once I changed the configuration, the test went perfectly. :-) This wasn't the SW for me to try to "roll my own" RPM with, since the Source code wasn't available to me, etc. Thanks to everyone who replied, I have a lot more understanding about how the SW for your UPS is configured (and why) and a little understanding of what packaging SW involves. Much appreciated!

2 2

OpenSSL > 0.9.8b
by Richard Berndt 03 Mar '09

03 Mar '09

Does anyone know if a new vesion of openssl will be available any time soon? RHEL has had 0.9.8e out since Jan 2009. Anyone?

2 1

openldap 2.4.11 ......unable to start on reboot
by Agnello George 03 Mar '09

03 Mar '09

Hi I had upgraed my opneldap rpm frm 2.3.27 to 2.4.11 with ehelp of the followng link http://staff.osuosl.org/~jeff/openldap/ I had then rebooted my machine and now whne i am starting ldap [root@system-test40 ldap]# /etc/init.d/ldap start Checking configuration files for slapd: bdb_db_open: database "o=netserv_ldap": unclean shutdown detected; attempting recovery. bdb_db_open: database "o=netserv_ldap": recovery skipped in read-only mode. Run manual recovery if errors are encountered. ch_calloc of 1 elems of 480000004 bytes failed slaptest: ../../../servers/slapd/ch_malloc.c:107: ch_calloc: Assertion `0' failed. i tried to do some recovery as mentioned in vairous archives : cd /var/lib/ldap slapd_db_recover -v but it still not able to restart it give me the same error [root@system-test40 ldap]# /etc/init.d/ldap restart Stopping slapd: [FAILED] Checking configuration files for slapd: bdb_db_open: database "o=netserv_ldap": unclean shutdown detected; attempting recovery. bdb_db_open: database "o=netserv_ldap": recovery skipped in read-only mode. Run manual recovery if errors are encountered. ch_calloc of 1 elems of 480000004 bytes failed slaptest: ../../../servers/slapd/ch_malloc.c:107: ch_calloc: Assertion `0' failed. [ OK ] Starting slapd: [ OK ] [root@system-test40 ldap]# /etc/init.d/ldap status slapd is stopped has any one encounterd the same issue ......... thanks for all the help !! -- Regards Agnello D'souza

4 3

Additional CDs Installation in kick start
by Balaji 03 Mar '09

03 Mar '09

Dear All, Currently i have using CentOS release 4.4 (Final) Linux. I am new in CentOS Kick Start Installation and I have prepared my own kick start file as per my knowledge. For your verification or analysis i have attached my kick start file Can any one help me how do i install my Application CDs from kick start installation or how can i add my Application CDs as Additional CDs Installation Option available in CentOS. Regards -S.Balaji lang en_US langsupport en_US keyboard us mouse none timezone --utc Asia/Calcutta rootpw midasrd text zerombr yes bootloader --location=mbr install cdrom clearpart --all part /boot --fstype ext3 --size=100 part pv.00 --size=100 --grow volgroup vgroot pv.00 logvol / --fstype ext3 --name=LogVol02 --vgname=vgroot --size=4000 logvol /usr --fstype ext3 --name=LogVol03 --vgname=vgroot --size=9000 logvol swap --fstype swap --name=LogVol04 --vgname=vgroot --size=1024 logvol /backup --fstype ext3 --name=LogVol00 --vgname=vgroot --size=14000 logvol /home --fstype ext3 --name=LogVol01 --vgname=vgroot --size=5000 --grow network --bootproto static --ip 192.168.50.1 --netmask 255.255.255.0 --gateway 192.168.5.5 --nameserver 127.0.0.1 auth --useshadow --enablemd5 firewall --medium --trust eth0 --ftp --telnet --ssh --smtp --dhcp --http selinux --disabled %packages @Everything

3 2

Hardware compatibility IM-945GC Intel Atom Mini-ITX
by Jason Pyeron 03 Mar '09

03 Mar '09

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is copyright PD Inc, subject to license 20080407P00.

4 5

Nfs v4 only - how to disable nfs v3?
by Olaf Mueller 03 Mar '09

03 Mar '09

Hello, I have nfs version 4 running on a CentOS 5.2 server to export /home. That works great so for, but clients can mount /home with nfs version 3 too. How can I disable nfs v3 on the server? Thank you Olaf

2 1

Best CentOS to install on *old* laptop?
by Bart Schaefer 03 Mar '09

03 Mar '09

I've found an old IBM OmniBook 800 and am curious whether I can get it going again. (Currently it boots either Windows 95 or some then-contemporary version of Slackware.) The CDROM is external (SCSI, I think) and the machine won't boot from it, so it'd require a boot floppy. Any suggestions? Or is CentOS entirely the wrong Linux to be thinking about for this?

7 7

Deleting Large Files
by Joseph L. Casale 03 Mar '09

03 Mar '09

I have an issue with a busy CentOS server exporting iSCSI and NFS/SMB shares. Some of the files are very large, and when they get deleted IO climbs to an unacceptable rate. Is there a way to purge a file with little to no IO overhead on ext3? Thanks! jlc

6 9

cups & hp-toolbox
by Roger Wells 02 Mar '09

02 Mar '09

Hello, I installed a printer (HP LaserJet 4350n) via CUPS Web Interface. Following this when I run hp-toolbox a dialog claiming that "No Installed HP Devices Found" is displayed. This is true even when I am the root user. This worked as expected on RHEL4 on the same computer (Thinkpad X31) with the same printer. Any thoughts will be appreciated. Thanks, roger wells -- Roger Wells, P.E. SAIC 221 Third St Newport, RI 02840 401-847-4210 (voice) 401-849-1585 (fax) roger.k.wells(a)saic.com

4 8

Cannot open port 631 for Cups printer sharing
by b.j. mcclure 02 Mar '09

02 Mar '09

I have been trying to set up printer sharing on the LAN.All machines are CentOS 5.2 fully updated. The problem server is a fresh build. The box it is replacing worked fine for many months. The problem appears to be a closed port 631 on the new box. iptables and ip6tables are stopped as shown by the output below. To confirm I was using nmap correctly I ran it against the old server first which shows 631 open. No matter what I do to the new box (192.168.2.205) 631 remains closed. I was running it on the new box via ssh which I think eleminates any swithc/router issues. Any thoughts gladly accepted. This must be something simple/stupid I have overlooked. Not much hair left to pull out. ;-/ B.J. [root@office bmcclure]# ssh 192.168.2.200 root(a)192.168.2.200's password: Last login: Sat Feb 21 17:39:51 2009 [root@fileserver ~]# nmap -sT -p 631 -PT 192.168.2.200 Starting Nmap 4.20 ( http://insecure.org ) at 2009-03-02 11:00 EST Interesting ports on 192.168.2.200: PORT STATE SERVICE 631/tcp open ipp Nmap finished: 1 IP address (1 host up) scanned in 0.121 seconds [root@fileserver ~]# nmap -sT -p 631 -PT 192.168.2.205 Starting Nmap 4.20 ( http://insecure.org ) at 2009-03-02 11:01 EST Interesting ports on 192.168.2.205: PORT STATE SERVICE 631/tcp closed ipp MAC Address: 00:17:31:EC:0B:2D (Asustek Computer) Nmap finished: 1 IP address (1 host up) scanned in 0.185 seconds [root@fileserver ~]# exit logout Connection to 192.168.2.200 closed. [root@office bmcclure]# ssh 192.168.2.205 root(a)192.168.2.205's password: Last login: Mon Mar 2 06:52:36 2009 from house.keepertoad.com [root@webserver ~]# service iptables stop [root@webserver ~]# service ip6tables stop [root@webserver ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@webserver ~]# ip6tables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@webserver ~]# nmap -sT -p 631 -PT 127.0.0.1 Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2009-03-02 11:03 EST Interesting ports on localhost (127.0.0.1): PORT STATE SERVICE 631/tcp closed ipp Nmap finished: 1 IP address (1 host up) scanned in 0.031 seconds [root@webserver ~]# service cups status cupsd (pid 6941) is running... [root@webserver ~]# nmap -sT -F -PT 127.0.0.1 Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2009-03-02 11:09 EST Interesting ports on localhost (127.0.0.1): Not shown: 1233 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 111/tcp open rpcbind 443/tcp open https 636/tcp open ldapssl 2049/tcp open nfs Nmap finished: 1 IP address (1 host up) scanned in 0.077 seconds [root@webserver ~]# CentOS 5.2, Linux 2.6.18-92.1.22.el5 x86_64 10:54:59 up 17:48, 1 user, load average: 0.34, 0.23, 0.09

4 26

(a) WinPower RPM available? (b) where to install if use tar.gz file?
by Lanny Marcus 02 Mar '09

02 Mar '09

Two quick and simple questions; I want to install the "WinPower" software for my new UPS. On their web site, they have a tar.gz file available for download. I know the reasons for staying with RPM, if at all possible. I've Googled and Yahood for ""WinPower"+RPM+Linux and get hits, but no obvious RPM. I tried "yum install winpower" and the response was "no package winpower available" (rpmforge is one of the yum repositories I use, so it's not there, with that name). (a) Is an RPM available for it? (If so, where and what's the name?) (b) If I need to download the tar.gz file and install from that, it looks from their documentation that they install into /opt/MonitorSoftware Is it better to install into /usr/local or into /opt? What is the recommendation for a CentOS box, when installing non RPM software? Where best to install non RPM stuff? TIA!

7 32

Problems printer PS 1.1 vs. 1.3/1.4
by MHR 02 Mar '09

02 Mar '09

I just ran into a most interesting situation. I am running CentOS 5.2 (2.6.18-92.1.22.el5) x86_64 with all the latest updates. I recently converted a TIF to a PDF using tiff2pdf, and then tried to print the file. Now, this has worked for me many times in the past, so I wasn't expecting any trouble at all. Instead, my printer, a Brother 2140 laser printer, which has printed these kinds of PDF files before without any problems, began spitting out the PS text instead. I did some poking around and found out that the PDF created by tiff2pdf was format 1.1. Another file I printed a few moments later, which I had scanned in, was PDF format 1.4, and it printed fine, as did the test page from System->Administration->Printer. I fired up my VMWare Windows guest, used Adobe Photoshop Elements 2.0 (an old version), converted the TIF using that, and lo and behold, the PDF is now in format 1.4. That one printed just fine. I'm running Adobe Reader 7.0.8 (mainly because AR 8.x never integrated properly into my web browsers, and, more importantly, I could not find a way to make it scale PDFs to fit my printers properly), so that _might_ be part of it, but, as I said, I have done this numerous times in the past and NEVER had a problem with it. Until now. Any clues what could be the problem? Anyone had better luck with a newer version of AR? Thanks. mhr

1 0

TIME_WAITs...
by John Doe 02 Mar '09

02 Mar '09

Hi, I was asked to check some TIME_WAITs "problems" (my boss thinks there should almost never be any) and I bumped into something strange... All of our servers have apparently normal (in my opinion) 60s TIME_WAITs (even if it strangely caps around 14000 in my tests)... But one of them behaves differently (and my boss thinks it is the normal behavior). If I make 10000 rapid connections/selects/deconnections to mysql on this server, I get like 1 TW after around 3000, another TW around 6000 and another TW around 9000... That makes 3 TWs only. And they last 60 seconds... I am told this server was not really setup differently (no custom kernel). All servers are CentOS 5.2, kernels 2.6.18-92.1.[22|10].el5. I compared the values in sysctl.conf and /proc/sys/net/ipv4/* and nothing different. So, am I correct in thinking that seeing thousands TWs when there was a burst of thousands connections is normal? Any idea why so few TWs on this server? Any conf file I should check? # cat /proc/sys/net/ipv4/tcp_fin_timeout 60 # cat /proc/sys/net/ipv4/tcp_max_tw_buckets 180000 # cat /proc/sys/net/ipv4/tcp_tw_recycle 0 # cat /proc/sys/net/ipv4/tcp_tw_reuse 0 When I googled for it, many people were pointing to the tcp_fin_timeout value ... Is it really related to TWs? Thx, JD

3 5

liblber-2.3.so.0 is needed by (installed ) ............ on cent os 5.2
by Agnello George 02 Mar '09

02 Mar '09

Hi I am trying to upgrde out openldap ver 2.3 to the lastest version 2.4, howevre there is no rpm avaibale for 2.4 so i decide to create my own for centOS flavour 5.2 here is the part look of my spec file openldap.spec Summary: openldap Installer Name: openldap Version: 2.4 Release: 1 Vendor: net Solutions License: Commercial Group: ms6 BuildRoot: /usr/src/redhat/BUILD/openldap Provides: openldap AutoReq: no AutoReqProv: no %description This package contains the F-PROT Antivirus for Linux. %files /bin/ /bin/ldapexop /bin/ldapmodify /bin/ldappasswd /bin/ldapadd /bin/ldapmodrdn /bin/ldapdelete /bin/ldapsearch /bin/ldapcompare /bin/ldapwhoami /etc/openldap/ /etc/openldap/ldap.conf.default /etc/openldap/ldap.conf /usr/include/ /usr/include/lber_types.h /usr/include/ldap_schema.h /usr/include/ldap_features.h /usr/include/ldap_cdefs.h /usr/include/lber.h /usr/include/ldap.h /usr/include/slapi-plugin.h /usr/include/ldap_utf8.h /lib/ /lib/liblber-2.4.so.2 /lib/liblber.la /lib/libldap_r-2.4.so.2.1.0 /lib/libldap_r-2.4.so.2 /lib/libldap_r.so /lib/libldap_r.a /lib/libldap_r.la /lib/liblber.so /lib/liblber.a /lib/libldap.so /lib/libldap-2.4.so.2 /lib/liblber-2.4.so.2.1.0 /lib/libldap.a /lib/libldap-2.4.so.2.1.0 /lib/libldap.la . . /usr/share/man/man5/slapd-sock.5 /usr/share/man/man5/slapd.access.5 /usr/share/man/man5/slapd-relay.5 /usr/share/man/man5/slapd-meta.5 /usr/share/man/man5/slapo-syncprov.5 /usr/share/man/man5/slapd-hdb.5 /usr/share/man/man5/slapo-rwm.5 /usr/share/man/man5/slapd.plugin.5 /usr/share/man/man5/ldif.5 /usr/share/man/man5/slapd-monitor.5 /usr/share/man/man5/slapd-perl.5 %defattr(-, root, root) %post cd /lib ln -s libldap_r-2.4.so.2 libldap_r-2.4.so.2.1.0 ln -s libldap_r.so libldap_r-2.4.so.2.1.0 ln -s liblber.so liblber-2.4.so.2.1.0 ln -s libldap.so libldap-2.4.so.2.1.0 ln -s libldap-2.4.so.2 libldap-2.4.so.2.1.0 it runs perfecetly and creates the RPM for me in /usr/src/redhat/RPMS/i386/openldap-2.4-1.i386.rpm however when i try to upgards the rpm it give me dependencies .... [root@pune openldap]# rpm -Uvh /usr/src/redhat/RPMS/i386/openldap-2.4-1.i386.rpm error: Failed dependencies: liblber-2.3.so.0 is needed by (installed) apr-util-1.2.7-6.i386 liblber-2.3.so.0 is needed by (installed) openldap-devel-2.3.27-5.i386 liblber-2.3.so.0 is needed by (installed) httpd-2.2.3-6.el5.centos.1.i386 liblber-2.3.so.0 is needed by (installed) cyrus-sasl-2.1.22-4.i386 liblber-2.3.so.0 is needed by (installed) nss_ldap-253-3.i386 liblber-2.3.so.0 is needed by (installed) php-ldap-5.1.6-5.el5.i386 liblber-2.3.so.0 is needed by (installed) openldap-clients-2.3.27-5.i386 liblber-2.3.so.0 is needed by (installed) postfix-2.5.5-1.cdb.pcre.sasl2.spf.rhel5.i386 liblber-2.3.so.0 is needed by (installed) cyrus-imapd-2.3.13-4.i386 liblber-2.3.so.0 is needed by (installed) mod_perl-2.0.2-6.1.i386 liblber-2.3.so.0 is needed by (installed) squid-2.6.STABLE6-4.i386 libldap-2.3.so.0 is needed by (installed) libuser-0.54.7-2.el5.1.i386 libldap-2.3.so.0 is needed by (installed) apr-util-1.2.7-6.i386 libldap-2.3.so.0 is needed by (installed) openldap-devel-2.3.27-5.i386 libldap-2.3.so.0 is needed by (installed) httpd-2.2.3-6.el5.centos.1.i386 libldap-2.3.so.0 is needed by (installed) cyrus-sasl-2.1.22-4.i386 libldap-2.3.so.0 is needed by (installed) sudo-1.6.8p12-10.i386 these modules are already present in the lib directory .........../lib/liblber-2.3.so.0 ............. Can some one help me with this error Thnsk a million - Regards Agnello D'souza

3 5

PAM and vsftpd
by RobertH 02 Mar '09

02 Mar '09

i have been researching for alternatives. it is latest centos 4 (4.7) and uses vsftpd 2.01 started (again) investigating possible PAM or PAM module way... Q: is there a PAM way to control repeated crack retires on vsftpd? possibly something that can be done in /etc/pam.d/vsftpd i have been looking for a solution other than fail2ban and/or similar methods using hosts.allow and hosts.deny or iptables specifically, i am trying to stop repeated access to vsftpd after more than x attempts from the same ip address.... thanks in advance for any pointers.. - rh

2 2

OOo 3 installation
by Rajagopal Swaminathan 02 Mar '09

02 Mar '09

Greetings, I tried installing OOo 3.x on an updated Centos 5 desktop (stock OOo 2.x was there), It had the following problems: 1. Installation of JRE 1.6.0 step failed citing dependency issues (relating to JRE 1.4 being required by OOo 2.x and the such) 2. after installation, It did run as root ok. but as a user keyboard practically freezes during the first run username entry requiring the process to be killed. I need OOo3 calc for its solver functionality for staff scheduling. Any similar experiences? better yet any solutions (a la Go-oo)? Thanks in advance. Regards, Rajagopal PS: I use digest mode to read posts in this list. Would appreciate a direct reply to my mail with cc to Centos list.

3 2

trying to install 5.2 on a laptop
by Michael Klinosky 01 Mar '09

01 Mar '09

Hello. I burned a CD with the 5.2 netinstall iso, and installed it onto a laptop (Acer Aspire 3680). Note that I'm *totally* new to laptops. The install went fine. But, when I boot it, it errors at the user login. A screen comes up, stating that X11 cannot start, and that it's probably the mouse. A bit of investigating revealed that there is no Synaptics module installed. It will boot into runlevel=3. I tried the 'upgrade' option of the netinstall disk; it saw that 5.2 is installed, and quit. |:( The X wiki suggested that I try adding this to /etc/X11/xorg.conf: Section "ServerFlags" Option "AllowMouseOpenFail" "1" EndSection Using "cat xorg.conf", I see Section "InputDevice" , which refers to the Synaptics module. Being new-ish to linux, I can't figure out the text-based editor (vi) to modify the file. I have "System Rescue CD" and "Ultimate Boot CD", but (apparently) they don't mount the installed system. I have some Fedora install disks (if they'd be of any help) - but not a rescue CD. It seems like CentOS doesn't have a rescue CD - would Fedora's help? I need to modify xorg.conf, or figure out how to install the Synaptics module. How can I do that?

6 9

mailscanner installation - centos 5.2 - rpmforge + vanderkooij rpms
by Linux Advocate 01 Mar '09

01 Mar '09

Guys, i have just installed ( after reading the docs on the mailscanner site and centos lists ) Mailscanner, and was wondering.... a.) How do i test my installation? is there some sample spam/ virus messages that can be used to test. b.) MailScanner -V shows; b.1) LibClamAV Warning: ************************************************** LibClamAV Warning: *** The virus database is older than 7 days! *** LibClamAV Warning: *** Please update it as soon as possible. *** LibClamAV Warning: ************************************************** how do i update this database? b.2) there are some modules missing; how do i iinstall them or do i ignore them Module versions are: 1.00 AnyDBM_File 1.16 Archive::Zip 0.17 bignum 1.04 Carp 1.42 Compress::Zlib 1.119 Convert::BinHex missing Convert::TNEF <--- missing ? 2.121_08 Data::Dumper 2.27 Date::Parse 1.00 DirHandle 1.05 Fcntl Optional module versions are: 1.30 Archive::Tar 0.17 bignum missing Business::ISBN <---- missing ? missing Business::ISBN::Data missing Data::Dump 1.814 DB_File 1.14 DBD::SQLite 1.52 DBI 1.14 Digest 1.01 Digest::HMAC 2.36 Digest::MD5 2.11 Digest::SHA1 missing Encode::Detect missing Error missing ExtUtils::CBuilder missing ExtUtils::ParseXS regards, mgomez.

3 3

gnet-2.0, gio-2.0
by Ondrej Filip 28 Feb '09

28 Feb '09

Hello, I'm porting one project to centos where we use gnet and gio libraries. Will be these libraries part of centos in future? I'm not sure what relationship is between these libraries and glib. Regards Ondrej Filip

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss