- Discuss - lists.centos.org

Test - please ignore
by Anne Wilson 02 Jan '09

02 Jan '09

Anne

3 4

ls network address traslation different in centos?
by chloe K 02 Jan '09

02 Jan '09

Hi all ls the network address traslation in centos5.2 different? I disable the default iptable rule and use the following commands but I can't connect http://public:8080 from outside to this host 192.168.0.10 port 80 eth1 is public address eth0 is private address 192.168.0.1 iptables -F -t nat iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE iptables --append FORWARD --in-interface eth0 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 8080 -i eth1 -j DNAT --to 192.168.0.10:80 Thank you --------------------------------- Looking for the perfect gift? Give the gift of Flickr! --------------------------------- Now with a new friend-happy design! Try the new Yahoo! Canada Messenger

5 5

Proxy password questions
by Kwan Lowe 01 Jan '09

01 Jan '09

Hello All: I'm having a strange issue with the yum proxy settings. It is directly related to passwords containing exclamation points. For example, the following works fine in yum.conf: http_proxy=http://somentlmproxy.somecompany.com http_password=regularpassword However, if the password contains any exclamation points, it will not authenticate properly. E.g., a password such as "TheyKilledKenny!!" will fail, but "TheyKilledKenny??" will work fine. I've tried exporting http_proxy from the command line and escaping the exclamation points: http_proxy=http://klowe:TheyKilledKenny\!\!@somentlmproxy.xxx.com:80 but no success. Any workarounds to get this going? Unfortunately, I do not have any control over the password.

2 1

Re: [CentOS] Any idea when we will have updated kmod-drbd82 rpm for the latest kernel?
by Alan Sparks 01 Jan '09

01 Jan '09

> > On Tue, Dec 2, 2008 at 3:14 AM, mbneto <mbneto at gmail.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: > >/ Hi, > />/ > />/ After searching the archive I found one post (last october) complaining > />/ about lack of kmod-drbd2 rpm for the lastest kernels. Almost two months > />/ have passed and no sign of the rpm I was wondering if the mantainer has some > />/ news about it. > / > Unlike previous versions, the current version of kmod-drbd82 is not > kernel version-specific. You should just update it and it will work > for newer kernels. > > Akemi > How is this statement justified? The RPM dependencies do not indicate this: $ rpm -qRp kmod-drbd82-smp-8.2.6-2.2.6.9_78.0.5.plus.c4.x86_64.rpm /bin/sh /bin/sh /sbin/depmod /sbin/depmod drbd82 >= 8.2.6 kernel-smp-x86_64 = 2.6.9-78.0.5.plus.c4 rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(VersionedDependencies) <= 3.0.3-1 $ rpm -qlp kmod-drbd82-smp-8.2.6-2.2.6.9_78.0.5.plus.c4.x86_64.rpm /lib/modules/2.6.9-78.0.5.plus.c4smp/extra/drbd.ko Since the current kernel is 78.0.8, this module will fail dependency checks. And install to the wrong module directory for the 78.0.8 kernel anyway... I have tickets 3291 and 3316 open for this. -Alan

2 1

Video support for Intel 852GM GMCH
by Robert Moskowitz 01 Jan '09

01 Jan '09

I am looking at a mini-itx system that has the Intel chipset. The video spec is the "Intel 852GM GMCH". Anyone know anything good or bad about this? The board is iGoLogic i3386G

2 2

wicd system tray status doesn't change when connected to network
by Thomas Iverson 01 Jan '09

01 Jan '09

hi all , i'm now using wicd network manager instead of network-manager and got a strange problem again wicd can managae wireless network connection well now but when i connected to the network my wicd icon still display "not connected" , i googled a lot but nothing helped anybody here using wicd ? i'm now using the lastest stable version 1.5.7 , thx for help -- Keep It Simple Stupid Thomas X. Iverson

1 0

nx - KDE - CentOS 5.2
by Craig White 01 Jan '09

01 Jan '09

something strange is occurring on what is a new setup CentOS 5.2, KDE via NX When I am in Konsole and I press the 'up arrow' key, I get KSnapshot instead of repeating the last line. I looked at kcontrol and there doesn't seem to be any keybinding to cause that and it's irritating and I can't figure out how to shut it off...can someone toss me a bone here? Craig

2 1

Wireless network connection problem
by Thomas Iverson 01 Jan '09

01 Jan '09

hi all , i just met a strange problem about my wireless network , i installed ipw3945 driver and it can detect the wireless network lists around my laptop ,but , i can't connect to the wireless network even under the right authority my centos 5.2 dectected my wirless network card as eth1 , it's really strange , i think any help ? thx and wish you a happy new year :) -- Keep It Simple Stupid Thomas X. Iverson

2 2

question about package buildings
by David Hláčik 31 Dec '08

31 Dec '08

Hello guys, our company is going to distribute our software as rpms. I have prepared set Source RPMS which works ok on 64-bit and i386 platform. I want to make our build process more automatic. 1. What is the best way to build 32bit RPMS on 64bit CentOS machine? 2. What software/automatization script can be used for make build more automatic === does for centos exists something like Koji for Fedora? Thanks in advance! David

2 1

downloadonly
by Jerry Geis 31 Dec '08

31 Dec '08

Hi I am trying to grab some files with the command (as example) yum -y install vnc --downloadonly --downloaddir=/tmp but it says the file is already installed. I know that, but I want to download it anyway and store it for later install on another machine (saving the download time later). How do I tell yum to go ahead and download the file? THanks, Jerry

2 1

TimeZone Mystery on a virtual dedicated server
by Ami Mahloof 31 Dec '08

31 Dec '08

Hi, I have a weird problem woth the time zone on my virtual (goDaddy) dedicated server I had to setup the timezone using system-config-date to GMT+7 i am in NY (GMT-5) when i do GMT-5 i get all the times 2 hours ahead seems like there's something im missing here If i add an event to my web app let's say 7:30 - 8:15 , the only way for me to show it right is GMT+7 can anyone help me figure out what am i missing here??? Thanks Ami

5 4

Xen DomU console connection
by James B. Byrne 30 Dec '08

30 Dec '08

Dom0 OS=CentOS-5.2_X86_64 Dom1 OS=CentOS-5.2_X86_64 I have a desktop machine running the xen kernel, Dom0. I have created a virtual machine on that host, Dom1. From my console session on Dom0 I can open a GUI console for Dom1 but I cannot resize the actual screen area. I can make the virtual console window larger but the screen stays centered at the same size while the margins increase in width. I would like to simply switch my entire desktop display from the Dom0 to Dom1 (together with the keyboard and mouse of course) and then back to Dom0 again when I am done. I suspect that this is not possible, but if it is then surely someone here will know. If I cannot actually switch desktops between domains then is there another technique available to accomplish much the same thing? I would like to use Dom1 for software development using visual editors and such. Running these inside the virtual console window is not workable, mainly due to the limited display size and the erratic behaviour of the mouse. Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

i386 packages on x64 servers
by German Andres Pulido Franco 30 Dec '08

30 Dec '08

Hi! I have some servers, all running centos 5.2 x64 with current updates. None of the servers has installed packages that are not part of the centos regular packages. They were installed using the "server" packages at install, therefore there is no X server, GNOME, KDE or any other non-server stuff. However, I recently noted that the servers have the x64 _and_ the i386 versions of some packages installed, for instance: krb5-libs-1.6.1-25.el5_2.1 and pam_krb5-2.2.14-1.el5_2.1. My question is: If I have no 32 bits software installed on these machines, why are such libraries installed? and can they be safely removed from the servers? Thanks in advance. GERMAN ANDRES PULIDO F. Ingeniero de Proyectos Global Technology Services - GTS S.A. ------------------------------------- Tel: (571) 658 34 10 ext 110 Cel: (573) 300 265 23 03 Carrera 7b No. 123-46 Bogotá-Colombia Sitio Web: www.gtscolombia.com

2 1

system config report
by David Miller 30 Dec '08

30 Dec '08

Long ago when I was an AIX admin we had a script we ran every 6 months or so and it created what we called the "System Book". It had every possible configuration option. While acknowledging that on a whole it was overkill documentation, if we ever had to rebuild the systems we knew *exactly* how the old one was set up to compare it to if we had problems. I'm looking to do something similar for my CentOS boxes. Or better yet, see if someone has already done something similar. I've poked around google and sourceforge on and off for a couple of months but haven't found much. The discussion lately about 'hwinfo' jogged my memory. Anyone know of something like this? A template, even? An old project that hasn't been updated but could be brought up to date? Thanks for any suggestions. Dave

5 6

xorg-x11-drv-nouveau for CentOS?
by Timo Neuvonen 30 Dec '08

30 Dec '08

Is there a way to use "Nouveau" (open source Nvidia) driver in CentOS 5 ? "nv" seems to support only the lowest resolutions thru the dvi output (NV44 chip), and I don't like the idea of installing propiertary Nvidia drivers. This way I came to Nouveau. I had a look at some Fedora rpms, but they needed something CentOS obviously doesn't have: # rpm -ivh xorg-x11-drv-nouveau-2.1.6-1.fc8.x86_64.rpm kernel-drm-nouveau = 10 is needed by xorg-x11-drv-nouveau-2.1.6-1.fc8.x86_64 Regards, Timo

7 14

IPv6 forwarding and ip6tables
by Robert Moskowitz 30 Dec '08

30 Dec '08

I am running multiple IPv6 subnets here in my testbed. My IPv6 'router' is a Centos box with IPv6forwarding turned on. It is also my RADVD server (over multiple VLans), and Miredo server/relay. I thought I had a simple ip6table setup that protected the box and let it forward. Well I am wrong. I got my previous DNS over IPv6 working on the DNS server, then tried to get it working from another box. After a couple hours fighting with it, I finally figured out that my Centos IPv6 router was rejecting the IPv6DNS queries, not forwarding them. I turned off ip6tables and the DNS lookups worked just fine. So I thought, well Shorewall6 beta is out, let's go with it already. I check out the shorewall discussions and discover you need at least the 2.6.25 kernel for Shorewall6. When I mentioned my dilemma, I was told that "2.6.18 doesn't support stateful IPv6 firewalling at all!" Just great...... When is that Centos 6 going to happen???? :( Anyway, the challenge for now: What do I put into ip6tables so that any IPv6 traffic that comes in any of the vlans on eth1 can go out any of the vlans on eth1?

1 0

DNS resolver over IPv6
by Robert Moskowitz 30 Dec '08

30 Dec '08

I have a Centos server that is running BIND and has IPv6 global addresses. I have entered a number of AAAA records into this copy of BIND in a local view and zone (tld is htt). Over IPv4, I have no trouble with nslookup ('nslookup - 127.0.0.1' and 'nslookup - 192.168.128.55'). I get the AAAA records back. But if I try to use the IPv6 address of the system I get a time out. Both from nslookup and from ping6. I setup /etc/resolv.conf as shown at: http://docsun.cites.uiuc.edu/sun_docs/C/solaris_9/SUNWaadm/SYSADV5/p13.html (the only hit I got on configuring resolv.conf for an IPv6 DNS server). I have turned off both ip6tables and iptables so it is not a firewall issue. Even 'nslookup - <ipv6 addr>' does not work. I seem to recall a problem with nslookup supporting udp over IPv6, but ping6 should not have that problem. This is all on the single system running BIND. I figure i got to get that working before worrying about other systems!

4 7

cluster - ip address lost when service stopped
by Fabio Macchi 30 Dec '08

30 Dec '08

Hi all, I'm trying to setup a cluster of 2 machines with Centos 5.2 to host a postfix+spamassassin+clamav+mailscanner service. Below cluster software versions rgmanager.i386 2.0.38-2.el5_2.1 installed cman.i386 2.0.84-2.el5_2.2 installed Every machine (hp blade server ) has 4 interfaces, bounded in this way: Eth0, eth1 -> bond0 -> connection for public service ( 10.0.181.x ) Eth2,eth3 -> bond1 -> connection for intra-cluster communication ( 192.168.44.x ) bond0 Link encap:Ethernet HWaddr 00:21:5A:48:DA:BE inet addr:10.0.181.41 Bcast:10.0.181.255 Mask:255.255.255.0 inet6 addr: fe80::221:5aff:fe48:dabe/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:0 TX packets:86 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12963 (12.6 KiB) TX bytes:9144 (8.9 KiB) bond1 Link encap:Ethernet HWaddr 00:1F:29:6D:7D:08 inet addr:192.168.44.41 Bcast:192.168.44.255 Mask:255.255.255.0 inet6 addr: fe80::21f:29ff:fe6d:7d08/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:29 errors:0 dropped:0 overruns:0 frame:0 TX packets:223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4612 (4.5 KiB) TX bytes:31746 (31.0 KiB) Then I've created a new Mail service with these local resources: - Ip address 10.0.181.3 - Script /etc/rc.d/init.d/MailScanner - GFS file system on a SAN Service start, but the problem is that, when I stop the service, external ip address is removed from bond0. What may cause this ? I don't find any helpful information in /var/log/messages, what may I check to investigate ? I've not setted any fence device, as I have configured GFS resource internally to the service ( GFS partition is mounted only from the server running the service ): is this a wrong design ? Has anyone already setup this kind of service on a Centos cluster ? Many thanks in advance for any hints. Fabio

3 6

2 internet connections and one for backup
by Mariusz 30 Dec '08

30 Dec '08

I've got 2 internet connections but unfortunately not the same - 6mbit and 1 mbit. My default is 6mbit and I want to create backup connection (1mbit). How can do it? Has anybody done it? My perfect scenario is that my network uses 1mbit if (only) 6mbit fails and it switches automatically. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

11 17

2 default gateway?
by Mario 30 Dec '08

30 Dec '08

I've got 2 internet connection, one is direct connected to my server and the second i use by default gateway. How can I create 2 default gateway? I want to add default gateway my second internet. How can I solve problem which gateway is used? Mario

6 7

Source for kernel.
by clemens＠dwf.com 29 Dec '08

29 Dec '08

Im brand new to CentOS, so this is probably a question with a simple answer (if I only knew where to look). Someone hans pointed me at the centos.plus kernel, which is close to what I need, but I still have to add a couple of options. So where do I find either the src for the centos.plus kernel, or a diff from something like 2.8.18 or 2.6.28.8 ??? With this Ill be able to add my additional options... -- Reg.Clemens reg(a)dwf.com

3 2

yum cannot find bittorent rpm at dag
by James B. Byrne 29 Dec '08

29 Dec '08

I am trying to get the x86_64 isos of CentOS-5.2. I wish to use bittorrent. The last time that I did this I required the bittorent package from Dag's repository. I have configured /etc/yum.repos.d/DagWieers.repo thus: [dag] name=Dag Wieers RPM Repository for Red Hat Enterprise Linux #Also see URL http://dag.wieers.com/home-made/apt/ baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgcheck=1 # This repo often does not respond in a timely fashion so turned off # by default. Use yum --enablerepo=dag to use. enabled=0 gpgkey=http://dag.wieers.com/packages/RPM-GPG-KEY.dag.txt includepkgs=bittorrent* perl* # priority requires yum-priorities. Must also be enabled in /etc/yum.conf # and /etc/yum/pluginconf.d/priorities.conf. priority=20 Then I run yum thus: # yum --enablerepo=dag whatprovides bittorent But yum cannot find bittorrent. Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * epel: mirror.unl.edu * dag: apt.sw.be * base: centos.mirror.iweb.ca * updates: centos.mirror.iweb.ca * addons: centos.mirror.iweb.ca * extras: centos.mirror.iweb.ca dag 100% |=========================| 1.1 kB 00:00 Reducing Extra Packages for Enterprise Linux 5 - x86_64 to included packages only Finished Reducing Dag Wieers RPM Repository for Red Hat Enterprise Linux to included packages only Finished No Matches found What am I doing wrong? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 9

Source for Kernel
by clemens＠dwf.com 29 Dec '08

29 Dec '08

OK, perhaps I wasnt clear in my previous posting. I am looking for either a SRPM for the CentOS 5.2 centos.plus kernel, or more likely, a diff from the kernel at kernel.org. I was pointed to the wiki, which MENTIONED a Source RPM, but didnt point to anywhere to find these for CentOS. All Ive been able to find are ISO's . I really dont need a bunch of tools that will complicate the problem, a simple diff is what Im looking for,- its got to be out there somewhere. -- Reg.Clemens reg(a)dwf.com

4 3

dkim-milter-2.7.2 and Centos 5.2
by Gregory P. Ennis 29 Dec '08

29 Dec '08

I am trying to install dkim-milter-2.7.2 on a Centos 5.2 system and keep getting the following errors. I have very little experience in C programing so I am at a loss as how to proceed. I have sendmail-devel installed Here is the tail of the result output of sh ./Build make[2]: cc: Command not found make[2]: *** [assert.o] Error 127 make[2]: Leaving directory `/etc/mail/dkim/dkim-milter-2.7.2/obj.Linux.2.6.18-92.1.22.el5xen.i686/libsm' make[1]: *** [/etc/mail/dkim/dkim-milter-2.7.2/obj.Linux.2.6.18-92.1.22.el5xen.i686/libsm/libsm.a] Error 2 make[1]: Leaving directory `/etc/mail/dkim/dkim-milter-2.7.2/obj.Linux.2.6.18-92.1.22.el5xen.i686/dkim-filter' make: *** [all] Error 2 Any ideas? Greg Ennis

2 3

UDEV rule allow users to unmount USB stick
by Philip Manuel 29 Dec '08

29 Dec '08

I'm trying to understand why a normal user is not allowed to unmount their USB stick? I think it is most likely a udev rule. does anyone know ? Thanks Phil.

5 10

aide and changes in system
by Mariusz 28 Dec '08

28 Dec '08

I've checked my system by aide and i've received information: changed: /bin changed: /bin/tar changed: /bin/mv changed: /bin/cp changed: /bin/ls changed: /bin/vi i don't remember that I changed those commands, what does it mean? Somebody broken in? or those commands are changed normally? -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 3

Sendmail problem
by swilting 28 Dec '08

28 Dec '08

I wish to add options to sendmail INPUT_MAIL_FILTER(`spamassassin', `S=local:/var/run/spamass-milter/spamass-milter.sock, F=T, T=C:5m;S:4m;R:4m;E:5m')dnl dnl MAILER(cyrusv2)dnl INPUT_MAIL_FILTER(`greylist', `S=local:/var/run/milter-greylist/milter-greylist.sock') define(`confMILTER_MACROS_CONNECT', `j, {if_addr}') define(`confMILTER_MACROS_HELO', `{verify}, {cert_subject}') define(`confMILTER_MACROS_ENVFROM', `i, {auth_authen}') define(`confMILTER_MACROS_ENVRCPT', `{greylist}') and LOCAL_CONFIG Kstorage macro LOCAL_RULESETS SLocal_check_rcpt R$+ $: $(storage {greylist} $) $&{client_addr} R$+ $: $>A <$1> <?> <+Connect> <$1> R<$+> <$*> $: $(storage {greylist} $@ $1 $) $2 it does not seem to work after retstart sendmail I errors [root@r13151 ~]# /sbin/service sendmail restart Arr�t de sm-client : [ OK ] Arr�t de sendmail : [�CHOU] D�marrage de sendmail :554 5.0.0 /etc/mail/sendmail.cf: line 1685: Xspamassassin: `=' expected WARNING: Xgreylist: local socket name /var/run/milter-greylist/milter-greylist.sock missing 451 4.0.0 InputFilter spamassassin not defined: No such file or directory [�CHOU] D�marrage de sm-client : [ OK ] [root@r13151 ~]# that happens I've done yet /sbin/servive greylistd start /sbin/servive spamassassin start thank you for all your returns sl

4 7

C5: prevent loading of AHCI in favor of "fakeraid" megaide
by Rainer Traut 28 Dec '08

28 Dec '08

Hi, I'm trying to install an old fujitsu siemens econel 50 server. It uses an Intel chipset with ICH6R sata subsystem known as fakeraid. I have configured a Raid 1 with two 160GB hds. FS and Intel both provide a driver called megaide on a driver disk to use fakeraid and here is the problem: - The readme tells me to install with the "nostorage" kernel option and I can load the megaide driver with the driver disk. - in anaconda I only see one disk sda - exactly what I want. - after installation when booting the 92.el5 kernel obviously the ahci driver is used not the megaide, LVM complains about identical PVs on sda and sdb and I can unload megaide while running the server - so megaide is not used upon reboot but ahci - megaide is inside the initrd but - probably because ahci loads first - not used Question: How can I prevent the ahci driver to load after installation? Thx Rainer PS: I know the pros and cons of fakeraid - I want to use it. Plz no discussion about this.

2 1

cypromis has invited you to Spokeo
by cypromis＠gmail.com 28 Dec '08

28 Dec '08

Hi CentOS,<br/><br/> cypromis(a)gmail.com has invited you to try Spokeo, which finds your friends' updates across the Web. Your friends are already using Spokeo to follow you on Web Results. Try Spokeo today to find what your friends are doing across 30 different social networks! Click http://www.spokeo.com/public/join?c=037b35dbf49f39b9a396d7d2f45199afdffb8bc9 to accept your invitation. ----- This invitation was sent with cypromis's approval. If you wish to opt out of all future emails, go to http://www.spokeo.com/optout?c=c495256515154515449 Copyright (c) 2008 Spokeo, Inc. All rights reserved. 1685 Plymouth Street #200, Mountain View, CA 94043

1 0

PHP 5.2.x rpm for Centos 5? (any news)
by mbneto 27 Dec '08

27 Dec '08

I've searched the archives and found a post last march about a rpm version of php for centos. Any news about it? Is it still in testing? Any known issues? Where do I get it? Thanks.

11 13

Beginner - need suggestion to improve BACKUP script
by partha chowdhury 27 Dec '08

27 Dec '08

hallo list, I have recently started to learn shell scripting. Now i am trying to write a script to backup /etc and /var to my home dir in a separate folder and then backup the home dir to usb drive using rsync. My goal is when i will run the script it will output status to standard output in form of bold messages with time and simultaneously logs to another file in /root dir. I have labled the usb drive as "usb-mass-storage". the script runs fine according to my requirement. Now i need suggestion to improve the script further. Thank you. the script is as follows: > #!/bin/sh > if blkid |grep USB-Mass-Storage > then > if [ -d /media/backup ] > then > /bin/mount LABEL=USB-Mass-Storage /media/backup > echo "------------------------------------------------------------------------- " >> /root/backup.log > echo $(date) >> /root/backup.log > /etc/rc.d/init.d/named stop &> /dev/null > echo "CONFIGURATION backup starting "|tee -a /root/backup.log > /usr/bin/rsync -a --progress --delete /etc/ ~freedom/backup/etc/ >> /root/backup.log;echo "CONFIGURATION backup finished" |tee -a /root/backup.log;echo "VARIABLE backup starting"|tee -a /root/backup.log;/usr/bin/rsync -a --progress --delete --exclude=ftp/pub/media/ /var/ ~freedom/backup/var/ >> /root/backup.log; echo "VARIABLE backup finished" |tee -a /root/backup.log;/etc/rc.d/init.d/named start&> /dev/null > echo " Now we are going to backup $(date)" |tee -a /root/backup.log > /usr/bin/rsync -a --progress --delete /home/freedom/ /media/backup/ |tee -a /root/backup.log; echo "BACKUP FINISHED $(date)" |tee -a /root/backup.log > else > echo "$(date) DISTDIR does not exist" |tee -a /root/backup.log > fi > else > echo "$(date) USB drive not entered"|tee -a /root/backup.log > fi 1>the /root/backup.log is the log file 2>i stop the named service before starting backup as i run the named process in a chroooted environment and if i trey to manually backup /var with rsync i get :/var/named/chroot/proc/kcore: <file> has vanished ! 3>my home dir is /home/freedom 4>i exclude the /var/ftp/pub/media/ folder as it is just the copy of centos 5 dvd which i use as my local base repo.

3 4

Something to test in php 5.2
by Michael A. Peters 27 Dec '08

27 Dec '08

Since people are testing php 5.2 in the CentOS repo - here's a bug I found in my own build of 5.2 that probably is a general php bug - but is worth testing on the CentOS testing packages. If using imagefttext with a Postscript type 1 font - $lstring="©" . date("Y") . " My Real Name"; or $lstring=html_entity_decode("©", ENT_COMPAT, "UTF-8") . date("Y") . "My Real Name"; both result in a ' instead of a © when rendered on the image. Works fine with a TrueType font, only an issue with Type1 fonts. Well, I only tried the second (with html_entity) with a ttf font, but point is it doesn't do what it is suppose to do with ps fonts.

2 1

Installing RHEL5.3
by Alain PORTAL 26 Dec '08

26 Dec '08

Hi, As I can start X on Centos 5.2, can somebody explain me how to install RHEL 5.3 pre-release or give me a pointer that explain how to do? ftp://ftp.redhat.com/pub/redhat/linux/beta/RHEL5.3/ I should want to know if I'll can install Centos 5.3 ;-) Regards, Alain -- Les pages de manuel Linux en français http://manpagesfr.free.fr/

6 12

Bash Script for Beginners! oh dear :'(
by James Bensley 26 Dec '08

26 Dec '08

Hey guys, I'm a bit of a beginner (understatement!) with shell scripting and seek help! I am setting up our new squid proxy. Its working a treat and squidGuard is the icing on the cake. But, I am trying to write a shell script to search through our black list category's for squidGuard and remove the parsed value; Scenario: /some/directory/where/blacklist/is/stored contains about 40-50 folders called, adult, gambling, banking, warez etc. There is a folder for each blocking category (and in each folder is two files, urls and domains, standard stuff for web filtering!) I have a script to search through /some/directory/where/blacklist/is/stored and look at each text file trying to find someblockedsite.com and remove it. This is as far as I have got: machine:/blacklistdir# sh ./find_files "blockedsite.com" find_files is as follows: #!/bin/bash rm -f ./found_files touch ./found_files find . -exec grep -q "$1" '{}' \; -print >> ./found_files i=1 while [ $i -le `wc -l ./found_files` ] ; do grep -iv $1 $2 > $2.new ####This is where I am stuck, I have put $2 but I want to be reading each line of text from found_files? rm $2 mv $2.new $2 done But I am totally stuck! My questions to this awesome list are: can someone help my with my script? And, if so, can you explain to me how you have achieved your solution? Thanks a lot for reading guys n gals its greatly appreciated. Regards, James. -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT/MU/U dpu s: a--> C++>$ U+> L++> B-> P+> E?> W+++>$ N K W++ O M++>$ V- PS+++ PE++ Y+ PGP t 5 X+ R- tv+ b+> DI D+++ G+ e(+++++) h--(++) r++ z++ ------END GEEK CODE BLOCK------

6 8

yum install audacity --enablerepo=*\rpmforge Error in Dependency Resolution
by JohnS 26 Dec '08

26 Dec '08

]# yum install audacity --enablerepo=*\rpmforge Was this not going to be fixed for dep resolution. I'm not on the rpmforge list and remember this issue from a while ago. 14:02:18 : Error in Dependency Resolution 14:02:18 : Missing Dependency: libwx_gtk2u_adv-2.6.so.0 is needed by package audacity Missing Dependency: libwx_gtk2u_xrc-2.6.so.0 is needed by package audacity Missing Dependency: libwx_gtk2u_html-2.6.so.0(WXU_2.6) is needed by package audacity Missing Dependency: libwx_gtk2u_html-2.6.so.0 is needed by package audacity Missing Dependency: libwx_baseu_net-2.6.so.0(WXU_2.6) is needed by package audacity Missing Dependency: libwx_baseu-2.6.so.0 is needed by package audacity Missing Dependency: libwx_gtk2u_qa-2.6.so.0 is needed by package audacity Missing Dependency: libwx_gtk2u_core-2.6.so.0(WXU_2.6) is needed by package audacity Missing Dependency: libwx_gtk2u_core-2.6.so.0(WXU_2.6.2) is needed by package audacity Missing Dependency: libwx_baseu-2.6.so.0(WXU_2.6) is needed by package audacity Missing Dependency: libwx_baseu_net-2.6.so.0 is needed by package audacity Missing Dependency: libwx_gtk2u_core-2.6.so.0 is needed by package audacity Missing Dependency: libwx_baseu_xml-2.6.so.0 is needed by package audacity -- ~/john OpenPGP Sig:BA91F079

2 4

Security advice, please
by Anne Wilson 26 Dec '08

26 Dec '08

My LAN is behind a Netgear router, which does NAT. On the CentOS server I have fail2ban running. This morning my router reported 3 different IPs attempting to send UDP packets to port 38950, Since each address is only seen 4-5 times, I presume that fail2ban took over after that. GRC reports that ports are stealthed (port 143 was open, but is now closed), but then: Unsolicited Packets: RECEIVED (FAILED) — Your system's personal security countermeasures unwisely attempted to probe us in response to our probes. While some users believe that "tracking down" the source of Internet probes is useful, experience indicates that there is little to gain and potentially much to lose. The wisest course of action is to simulate nonexistence — which your system has failed to do. Your counter-probes immediately reveal your system's presence and location on the Internet. So, two questions really. First, what should I be looking for on the router, to turn off this 'tracking down' activity? Then, I want to read from my own IMAP server when I'm away from home. Is there a better way than opening port 143? Anne

12 24

Fasttrack Repo on CentOS 4
by Vandaman 26 Dec '08

26 Dec '08

A quick question on the fasttrack repo which is now up to date with upstream. Why is the fasttrack repo not in the main CentOS-Base.repo file but contrib which has never had anything is included in the main CentOS-Base.repo file? The goal of CentOS is to be binary-compatible with upstream so fasttrack is "more important" in this regard than contrib. Upsteam ships with the main channels as well as fasttrack. As CentOS includes the repos in one repo file rather than having separate files, this tradition should be considered for fasttrack as well. Regards, Vandaman.

2 2

Question on USB to CF device
by Jerry Geis 26 Dec '08

26 Dec '08

I have this USB to CF device I tried to plug in today. Below is dmesg output when I plug it in. I was hoping it would look just like a USB thumbdrive. Is there something special I would have to do to be able to read the USB to CF device? Looks like its trying to make it /dev/sdd but I continue to get the errors at the end. Thank, jerry Dec 26 08:41:53 devgeisquad kernel: usb 1-4: new high speed USB device using ehci_hcd and address 83 Dec 26 08:41:53 devgeisquad kernel: usb 1-4: configuration #1 chosen from 1 choice Dec 26 08:41:53 devgeisquad kernel: scsi37 : SCSI emulation for USB Mass Storage devices Dec 26 08:41:58 devgeisquad kernel: scsi 37:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS Dec 26 08:41:58 devgeisquad kernel: usb 1-4: USB disconnect, address 83 Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] READ CAPACITY failed Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] Sense not available. Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] Write Protect is off Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] Assuming drive cache: write through Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: [sdd] Attached SCSI removable disk Dec 26 08:41:58 devgeisquad kernel: sd 37:0:0:0: Attached scsi generic sg3 type 0 Dec 26 08:41:59 devgeisquad kernel: usb 1-4: new high speed USB device using ehci_hcd and address 84 Dec 26 08:42:14 devgeisquad kernel: usb 1-4: device descriptor read/64, error -110 Dec 26 08:42:29 devgeisquad kernel: usb 1-4: device descriptor read/64, error -110 Dec 26 08:42:29 devgeisquad kernel: usb 1-4: new high speed USB device using ehci_hcd and address 85 Dec 26 08:42:44 devgeisquad kernel: usb 1-4: device descriptor read/64, error -110

1 0

saslauthd question and sendmail
by swilting 26 Dec '08

26 Dec '08

the commande [root @ r13 *** ~] # sasl2-shared-mechlist Available mechanisms: GSSAPI, ANONYMOUS CRAM-MD5, DIGEST-MD5, LOGIN, PLAIN, NTLM Library media: EXTERNAL, NTLM, PLAIN, LOGIN, DIGEST-MD5, CRAM-MD5, ANONYMOUS, GSSAPI [root @ r13151 ~] # indicates the presence of all options the customer smtp in the page http://www.sendmail.org/~ca/email/auth.html it indicates that you have to edit /etc/sysconfig/saslauthd it seems to me I have to try to change the option pam present in the file in plain login but after impossible to restart /sbin/service saslauthd restart is not working anymore my question is related Sendmail I try to configure I thank you for all your returns sl ps:Excuse my bad English I am French

2 1

Another security question
by Anne Wilson 26 Dec '08

26 Dec '08

I would like to be able to check my bank account while we are on holiday. I know the bank's site is encrypted from the start - the login page is https and Verisign-trust encrypted - but is there any risk in using public wireless networks for jobs like this? It sounds secure enough, but maybe I'm paranoid.... Anne

6 11

Please share some RHCE/RHCT learning material
by Xiaobo Zhu 26 Dec '08

26 Dec '08

Hi all, will anyone please share me some material on RHCE/RHCT, I am fighting for the Quality Engineer in RedHat, and that may help a lot in the coming written exam. Many thanks and Merry Christmas! Cheers, Xiaobo

5 6

FYI: IBM Netvista locking up
by Thomas Dukes 26 Dec '08

26 Dec '08

Hello, Having not been able to run a kernel without locking up since 2.6.9-34.0.2.EL, I think I have found the 'fix'. There are numerous post about this and all suggest its related to ACPI. For me, its APIC. I added the following to grub.conf: noapic apic=off. Been up now 4 days, 22 mins. running 2.6.9-78.0.8.EL. Previously I could get maybe 4 - 6 hours before locking up. Another thing I noticed is that eth1 was on interrupt 9, the same as ACPI. I also changed the interrupt for ACPI in CMOS to 10. I'm happy as a pig in slop!!! I may now upgrade to 5.2.

1 0

need help to play video
by adrian kok 25 Dec '08

25 Dec '08

Hi I click the DVD amd there is an error The playback of this movie requires a MPEG-2 System Stream demuxer plugin which is not installed. Which rpm I can install to play the video? Thank you Send instant messages to your online friends http://uk.messenger.yahoo.com

2 2

Linux backup help
by Kevin Kempter 25 Dec '08

25 Dec '08

Hi All; I'm awaiting a new linux laptop that will be my primary work machine. I want to implement a strategy that allows me as easily as possible to revert back to a former state. My primary concern is a scenario where I apply system updates and it breaks something that for me is critical. I wonder if a simple rsync script would work. If so, here's what I'm thinking: 1) updates are available so I execute the rsync script which pulls any updated files from my laptop to a backup server/drive 2) apply updates 3) if something breaks (even if I can no longer login) I boot the laptop, run the rsync script in the opposite direction (push files from the backup drive to the laptop) I assume that if I were to execute step 3 above that my system would be in the exact state that it was before I ran the updates. Is this a correct assumption ? Are there better approaches ? Thanks in advance..

10 17

yum update via NX connection?
by Les Mikesell 25 Dec '08

25 Dec '08

Somewhere in the process of doing a yum update from a terminal window open in an NX/freenx desktop session, the whole session blew up - perhaps when ssh restarted or when freenx was updated. The yum update did not complete beyond that point and the session was gone when I reconnected. Is that supposed to happen? (Centos 5.x) -- Les Mikesell lesmikesell(a)gmail.com

2 2

Missing CentOS 4.7 update?
by Vandaman 25 Dec '08

25 Dec '08

Unless I'm mistaken, does it look like Centos 4.7 is missing an update released on December 3rd 2008? Upstream details :- http://rhn.redhat.com/errata/RHBA-2008-0989.html An updated tmpwatch package that fixes various bugs is now available. The tmpwatch utility recursively searches through specified directories and removes files which have not been accessed in a specified period of time. tmpwatch is typically enabled and configured to clean up directories used for temporarily holding files, such as, for example, the /tmp directory. This updated tmpwatch package includes fixes for the following bugs: * tmpwatch unnecessarily reported a "No such file or directory" error whenever a file was deleted before tmpwatch accessed it. In this updated package, tmpwatch correctly no longer reports such errors, thus resolving the issue. <snip> Regards, Vandaman.

5 7

Gnome Desktop Session Save?
by James B. Byrne 24 Dec '08

24 Dec '08

I seem to recall that at one time with CentOS I had the ability to save my gnome desktop and open applications, like terminal, when exiting. The effect was such that when I logged on to a new session those applications would open automatically for me. Is my memory faulty? If not, then has this facility been removed? If neither my memory failed nor the facility removed then how does one do this now in CentOS-5? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Alternative to audacity
by MHR 24 Dec '08

24 Dec '08

What's a good, gui-based sound editor as an alternative to audacity (since that is not working right now due to conflicts in the gtk libraries in rpmforge)? Or is there another place whence one may retrieve audacity? I tried sourceforge, but the links there resolve to a broken download link or they are for 64-bit rpms. Thanks. mhr

3 7

CentOS, PHP, Basic GIS
by Michael A. Peters 24 Dec '08

24 Dec '08

I have no experience with GIS whatsoever. I really know squat about it. I'm currently working on a project to plot locality data for wildlife on a map of Shasta County. This is for a new herpetological club that hopes to track strength of our local herp populations, since it seems evident that in the last 20 years we lost one species of frog and are close to losing another (probably less than 100 left and they don't seem to be successfully breeding) and the declines were known, but the extent of the declines was not known well enough until it was too late. We want to try and prevent that with other species in our county by keeping records of where they currently are and where they use to be but are no longer found. When we see what appears to be shrinking range, we can investigate and if need be, request surveys by wildlife management before it is too late. Basically - the data will be plotted as a grid of regular hexagons. When locality information (museum record or photo voucher record in our own database) exists, the hexagon the record sits in gets drawn a pretty color (depending on type and age of records). I have it working on a raster (jpg) map where I guessed the latitude/longitude borders - working well enough with sample data that I know my php code works, but while it is ballpark accurate I need to do it with maps of known values. Quick and dirty option - obtain (possibly pay for) a large (at least 2k pixels wide) raster map with known lat/lon borders that has the county outline, major lakes and rivers, nothing else. The maps could be made and then resized for web view. The major problem with that model is that drawing colored hexagons near the county border and near rivers will make it more difficult to see them, thus making it harder to interpret the map. What I would prefer to do - Draw my data hexagons on a blank slate [ via imagecreate(width,height) function), then draw the county border on top of that, and then on top of that either draw the lakes/rivers and/or basic topographical lines. My preference obviously includes getting data sets for those things (county border, lakes/rivers, topography) in a format that I can parse with php to draw them with gd. My county does have some GIS data available: http://www.shastagis.co.shasta.ca.us/gissearch/search_new.aspx I don't have a clue how to get that data into format useful for drawing with gd via php. Anyone have experience with this? Can anyone recommend a (preferably free) Linux GIS program that works on CentOS that could potentially convert data files into format useful for drawing with gd? I don't need to get fancy with zoom, rotate, etc. capabilities - just a basic static flat map output. Thanks for any suggestions. I may try to find a "GIS for dummies" type book, though I've generally not been fond of dummy books, I kind of feel like one when it comes to GIS.

7 10

tripwire on centos 5
by Mariusz 24 Dec '08

24 Dec '08

Does anybody use tripwire on centos 5? Has anybody checked that: http://www.linickx.com/archives/281/tripwire-2411-rpm-for-centos-redhat-rhe… on centos5? M. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

6 8

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss