- Discuss - lists.centos.org

Raid1 --> Raid5
by Mariusz 23 Dec '08

23 Dec '08

I'm thinking of changing raid 1 to raid 5 (phisical --> in bios, now i've got 2 disks in raid1, i want to add 3rd disk). Will centos work correctly? cheers Mariusz -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 6

Unable to connect to printer; will retry in 30 seconds...: Connection timed out
by Indunil Jayasooriya 23 Dec '08

23 Dec '08

Hi ALL, I recently withed from CentOS 3 X server to CentOS 4.5. It works fine other than printers. there are many printers connected to it. We have configured the commnad printconf queue type is Networked UNIX (LPD) Some times, we will be able to print , But, some times, We will NOT be able to print. We can ping its ip address. Even, when we can't print, We can ping its ip address. When we check logs , we see something like this. [Job 888] Unable to connect to printer; will retry in 30 seconds...: Connection timed out Then, What we do is , We go to application, system setting, printing and when we get the window, We click apply button, Then, again, We will be able to print. Could u pls let me know why? But, When We used CentOS 3X, it worked fine. No problem at all. here are rpms installed on CentOS 3X [root@lwlsvr_old root]# rpm -qa |grep cups cups-1.1.17-13.3.32 cups-libs-1.1.17-13.3.32 [root@lwlsvr_old root]# rpm -qa |grep samba redhat-config-samba-1.0.16-5 samba-common-3.0.9-1.3E.5 samba-3.0.9-1.3E.5 samba-swat-3.0.9-1.3E.5 samba-client-3.0.9-1.3E.5 But, on CentOS 4.5 , We get issues. here are rpms installed on CentOS 4.5 [root@lwlsvr ~]# rpm -qa |grep cups hal-cups-utils-0.5.2-8 libgnomecups-0.1.12-5 cups-1.1.22-0.rc1.9.20 cups-libs-1.1.22-0.rc1.9.20 [root@lwlsvr ~]# rpm -qa |grep samba system-config-samba-1.2.21-1.el4.1 samba-common-3.0.10-1.4E.11 samba-3.0.10-1.4E.11 samba-client-3.0.10-1.4E.11 Hope to hear form you. -- Thank you Indunil Jayasooriya

4 4

MCP51 sound card can be recognized but can't work
by Xiaobo Zhu 23 Dec '08

23 Dec '08

Hi all, I recently install CentOS 5.2 on my Asus Z99M laptop, everything seem to works fine but there is some problem with the sound card. The system can recognized the hardware and I can even run the Realplayer for linux without any error messages, but it can't make any sound, or even noise. I have googled a lot but still can't get it work. Will anyone please guide me to solve this problem, step by step or just give me some reference. I will provide any information needed. Many thanks! Cheers, Xiaobo

2 2

no sound after hibernation
by partha chowdhury 23 Dec '08

23 Dec '08

I am not getting any sound after hibernating > [freedom@station2 ~]$ uname -a > Linux station2.domain2.example.com 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 athlon i386 GNU/Linux > > [freedom@station2 ~]$ /sbin/lspci -v|grep -i audio > 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) > 01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X > > > [freedom@station2 ~]$ rpm -qa|grep -i alsa > alsa-lib-devel-1.0.14-1.rc4.el5 > alsa-kmdl-2.6.18-92.1.13.el5-1.0.17-70.el5 > alsa-lib-1.0.14-1.rc4.el5 > alsa-utils-1.0.14-3.rc4.el5 > [root@station2 freedom]# /sbin/lsmod |grep -i snd > snd_hda_intel 24793 2 > snd_hda_codec 210881 1 snd_hda_intel > snd_emu10k1x 21957 1 > snd_rawmidi 26561 1 snd_emu10k1x > snd_ac97_codec 93025 1 snd_emu10k1x > snd_seq_dummy 7877 0 > snd_seq_oss 32577 0 > snd_seq_midi_event 11073 1 snd_seq_oss > snd_seq 49585 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event > snd_seq_device 11725 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq > snd_pcm_oss 42945 0 > snd_mixer_oss 19009 3 snd_pcm_oss > snd_pcm 72005 5 snd_hda_intel,snd_hda_codec,snd_emu10k1x,snd_ac97_codec,snd_pcm_oss > snd_timer 24517 2 snd_seq,snd_pcm > snd 52421 14 snd_hda_intel,snd_hda_codec,snd_emu10k1x,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > ac97_bus 6337 1 snd_ac97_codec > soundcore 11553 3 snd > snd_page_alloc 14281 3 snd_hda_intel,snd_emu10k1x,snd_pcm here are the logs after going to and waking from hibernation : from /var/log/messages: > Dec 22 14:20:10 station2 gnome-power-manager: (freedom) Hibernating computer because the DBUS method Hibernate() was invoked > Dec 22 14:20:13 station2 ntpd[5274]: ntpd exiting on signal 15 > Dec 22 14:20:15 station2 kernel: Disabling non-boot CPUs ... > Dec 22 14:20:15 station2 kernel: Breaking affinity for irq 50 > Dec 22 14:20:15 station2 kernel: Breaking affinity for irq 82 > Dec 22 14:20:15 station2 kernel: Breaking affinity for irq 106 > Dec 22 14:20:15 station2 kernel: CPU 1 is now offline > Dec 22 14:20:15 station2 kernel: SMP alternatives: switching to UP code > Dec 22 14:22:18 station2 kernel: CPU1 is down > Dec 22 14:22:18 station2 kernel: Stopping tasks: ==============================================================================================================================================| > Dec 22 14:22:18 station2 kernel: Shrinking memory... ^H-^H\^H|^H/^H-^H\^H|^H/^Hdone (110403 pages freed) > Dec 22 14:22:18 station2 kernel: usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 1 > Dec 22 14:22:18 station2 kernel: usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 1 > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:01:07.2 disabled > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:01:07.1 disabled > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:01:07.0 disabled > Dec 22 14:22:18 station2 kernel: NVRM: RmPowerManagement: 3 > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:00:09.0 disabled > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:00:07.0 disabled > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:00:04.1 disabled > Dec 22 14:22:18 station2 kernel: ACPI: PCI interrupt for device 0000:00:04.0 disabled > Dec 22 14:22:18 station2 restorecond: Read error (Interrupted system call) > Dec 22 14:22:19 station2 kernel: ACPI: PCI interrupt for device 0000:00:02.1 disabled > Dec 22 14:22:19 station2 kernel: ACPI: PCI interrupt for device 0000:00:02.0 disabled > Dec 22 14:22:19 station2 kernel: ....................... > Dec 22 14:22:19 station2 kernel: swsusp: Need to copy 67866 pages > Dec 22 14:22:19 station2 kernel: Intel machine check architecture supported. > Dec 22 14:22:19 station2 kernel: Intel machine check reporting enabled on CPU#0. > Dec 22 14:22:19 station2 kernel: swsusp: Restoring Highmem > Dec 22 14:22:19 station2 kernel: PCI: Enabling device 0000:00:02.0 (0000 -> 0002) > Dec 22 14:22:19 station2 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 66 > Dec 22 14:22:20 station2 kernel: PCI: Enabling device 0000:00:02.1 (0000 -> 0002) > Dec 22 14:22:20 station2 kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 233 > Dec 22 14:22:21 station2 kernel: usb usb1: root hub lost power or was reset > Dec 22 14:22:21 station2 kernel: ehci_hcd 0000:00:02.1: debug port 1 > Dec 22 14:22:21 station2 kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:00:04.0 (0000 -> 0002) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 20 (level, low) -> IRQ 74 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:00:04.1 (0000 -> 0002) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 22 (level, low) -> IRQ 50 > Dec 22 14:22:21 station2 kernel: usb usb2: root hub lost power or was reset > Dec 22 14:22:21 station2 kernel: ehci_hcd 0000:00:04.1: debug port 1 > Dec 22 14:22:21 station2 kernel: ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:00:07.0 (0000 -> 0002) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 74 > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 233 > Dec 22 14:22:21 station2 kernel: NVRM: RmPowerManagement: 5 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:01:07.0 (0110 -> 0111) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 82 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:01:07.1 (0110 -> 0111) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:01:07.1[B] -> Link [LNKC] -> GSI 17 (level, low) -> IRQ 90 > Dec 22 14:22:21 station2 kernel: PCI: Enabling device 0000:01:07.2 (0110 -> 0112) > Dec 22 14:22:21 station2 kernel: ACPI: PCI Interrupt 0000:01:07.2[C] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 58 > Dec 22 14:22:21 station2 kernel: pnp: Failed to activate device 00:08. > Dec 22 14:22:21 station2 kernel: ata4: SATA link down (SStatus 0 SControl 300) > Dec 22 14:22:21 station2 kernel: Restarting tasks... done > Dec 22 14:22:21 station2 kernel: Enabling non-boot CPUs ... > Dec 22 14:22:21 station2 kernel: SMP alternatives: switching to SMP code > Dec 22 14:22:21 station2 kernel: Booting processor 1/1 eip 3000 > Dec 22 14:22:21 station2 kernel: CPU 1 irqstacks, hard=c074d000 soft=c072d000 > Dec 22 14:22:21 station2 kernel: Initializing CPU#1 > Dec 22 14:22:21 station2 kernel: Calibrating delay using timer specific routine.. 2000.18 BogoMIPS (lpj=1000092) > Dec 22 14:22:21 station2 kernel: CPU: Vendor unknown, using generic init. > Dec 22 14:22:21 station2 kernel: CPU: Your system may be unstable. > Dec 22 14:22:21 station2 kernel: CPU1: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02 > Dec 22 14:22:21 station2 kernel: CPU1 is up > Dec 22 14:22:21 station2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > Dec 22 14:22:21 station2 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > Dec 22 14:22:21 station2 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > Dec 22 14:22:21 station2 kernel: ata2.00: configured for UDMA/133 > Dec 22 14:22:21 station2 kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) > Dec 22 14:22:21 station2 kernel: sdb: Write Protect is off > Dec 22 14:22:21 station2 kernel: SCSI device sdb: drive cache: write back > Dec 22 14:22:21 station2 kernel: ata3.00: configured for UDMA/133 > Dec 22 14:22:21 station2 kernel: SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) > Dec 22 14:22:21 station2 kernel: sdc: Write Protect is off > Dec 22 14:22:22 station2 kernel: SCSI device sdc: drive cache: write back > Dec 22 14:22:22 station2 kernel: ata1.00: configured for UDMA/133 > Dec 22 14:22:22 station2 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > Dec 22 14:22:22 station2 kernel: sda: Write Protect is off > Dec 22 14:22:22 station2 kernel: SCSI device sda: drive cache: write back > Dec 22 14:22:22 station2 gnome-power-manager: (freedom) Resuming computer > Dec 22 14:22:42 station2 ntpd[6599]: ntpd 4.2.2p1(a)1.1570-o Tue Jun 10 00:07:18 UTC 2008 (1) > Dec 22 14:22:42 station2 ntpd[6600]: precision = 1.000 usec > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface wildcard, 0.0.0.0#123 Disabled > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface wildcard, ::#123 Disabled > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface lo, ::1#123 Enabled > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface eth0, fe80::21d:60ff:fe80:f35a#123 Enabled > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface lo, 127.0.0.1#123 Enabled > Dec 22 14:22:42 station2 ntpd[6600]: Listening on interface eth0, 192.168.1.2#123 Enabled > Dec 22 14:22:42 station2 ntpd[6600]: kernel time sync status 0040 > Dec 22 14:22:44 station2 ntpd[6600]: frequency initialized -33.752 PPM from /var/lib/ntp/drift > the only message i found in the list while searching was this : http://lists.centos.org/pipermail/centos/2008-January/050910.html googling i found some hints related to ubuntu to change some hibernation option in /etc/default/acpi-support but is there some file like that in CentOS 5.2 because when i do "sudo find / -name acpi-support" and supplying my normal user password it does not return anything.

2 3

reloading a new kernel
by Agile Aspect 23 Dec '08

23 Dec '08

Hi - is it possible to load a SMP version of a kernel on a system running a single CPU version of the kernel without a reboot? For instance, a quad CPU system was accidentally booted as 2.6.9-78.0.5.EL but we need to load 2.6.9-78.0.5.ELsmp instead. Any help would be appreciated. -- Article. VI. Clause 3 of the constitution of the United States states: "The Senators and Representatives before mentioned, and the Members of the several State Legislatures, and all executive and judicial Officers, both of the United States and of the several States, shall be bound by Oath or Affirmation, to support this Constitution; but no religious Test shall ever be required as a Qualification to any Office or public Trust under the United States."

4 3

how to install yum by apt
by cjzjm100 23 Dec '08

23 Dec '08

Hi all! Becaule i heard that the apt was great,i wanted to try it.And when i tried to update my system,the yum faid,i installed the apt which came from dag repo by yum. After that i did:sudo apt-get update and sudo apt-get upgrade.There are some problem and i did as apt suggested:sudo apt-get --fix-broken install.Then apt said should remove 11 softwares insclude yum.I thougt even i removed the yum,i could installed it by apt again,so i removed them. After that i found i could not use apt smooth,there were many problem,so i want to install yum again.But apt couldn't find the yum package. In /etc/apt/sources.list.d,there are two lists:rpmforge.list and os.list. rpmforge.list: # Name: RPMforge RPM Repository for Red Hat Enterprise 5 - dag # URL: http://rpmforge.net/ #rpm http://apt.sw.be redhat/el$(VERSION)/en/$(ARCH) dag repomd http://apt.sw.be redhat/el$(VERSION)/en/$(ARCH)/dag repomd http://apt.sw.be redhat/el$(VERSION)/en/$(ARCH)/dag os.list: # Name: Operating system and updates ### Red Hat Enterprise Linux #repomd http://mirror.centos.org centos/$(VERSION)/os/$(ARCH) #repomd http://mirror.centos.org centos/$(VERSION)/updates/$(ARCH) #repomd http://mirror.centos.org centos/$(VERSION)/extras/$(ARCH) #repomd http://mirror.centos.org centos/$(VERSION)/fasttrack/$(ARCH) #repomd http://mrepo rhel$(VERSION)s-$(ARCH)/RPMS.os #repomd http://mrepo rhel$(VERSION)s-$(ARCH)/RPMS.updates #rpm http://mrepo rhel$(VERSION)s-$(ARCH) os updates ### Fedora Core Linux #repomd http://ayo.freshrpms.net fedora/linux/$(VERSION)/$(ARCH)/core #repomd http://ayo.freshrpms.net fedora/linux/$(VERSION)/$(ARCH)/updates #rpm http://ayo.freshrpms.net fedora/linux/$(VERSION)/$(ARCH) core updates ### Red Hat Linux #repomd http://ayo.freshrpms.net redhat/$(VERSION)/$(ARCH)/os #repomd http://ayo.freshrpms.net redhat/$(VERSION)/$(ARCH)/updates #rpm http://ayo.freshrpms.net redhat/$(VERSION)/$(ARCH) os updates What should i do?

4 6

Re: [CentOS] FTPS setup problem
by Dave Jones 22 Dec '08

22 Dec '08

>John wrote: >> He's testing it. Access with Dreamweaver may indeed work. >> ---- >> Ahh, DW will connect to my my ftp machine but I don't know about sftp. To me >> it is just easier to use DW or Visual Studio internal ftp tools to manage a >> site easier. I will try his config later on just to check it outwith DW. >> >> JohnStanley >> > >... and SFTP is not the same as FTPS. > >Actually, i tried with FileZilla (it seems to have an official bug with >vsftpd and FTPS) and SmartFTP and both had problems. > >So that's why i asked the question to the list. I dunno if i have >something wrong with the config, or any other subtility. Try using FileZilla 3.0.11.1 and it will work perfectly with VSFTPD. There is an update to TLS in the newer clients that has not caught up on the server side of VSFTPD yet. -- Dave Jones

1 0

masquerade from - postfix
by David Hláčik 22 Dec '08

22 Dec '08

Hello guys, recently my mail provider started blocking mails from non-existent domain. We use for internal purposes domain labs.hlacik.eu which exists only in our local DNS servers. Our mailserver is sx1.labs.polarion.com . As we use virtual domains configuration & mailman i want to keep it that way == unchanged myorigin or mydomain. What i want to setup is just masquerading for mails sent from localhost. As example mail from root(a)sx1.labs.polarion.com should be masqueraded to mail from root(a)polarion.com and etc. This is very easy fix in sendmail, but how to do this in postfix - and not to break virtual domains configuration. Thanks in advance! David

3 3

help with hdparm
by Jerry Geis 22 Dec '08

22 Dec '08

I am running centos 5.2 i686. The /boot/config indicates that VIA82CXXXX is built into the kernel. CONFIG_BLK_DEV_VIA82CXXX=y my lspci -v gives 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. Unknown device 0581 Flags: bus master, medium devsel, latency 32 I/O ports at fc00 [size=16] Capabilities: [b0] Power Management version 2 Which I think is the VIA part. when I do "hdparm /dev/hdc" I get /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 15733/16/63, sectors = 15858864, start = 0 when I do "hdparm -d1 /dev/dhc" I get /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) I get operation not permitted. How do I enable DMA mode for this device? Jerry

3 3

Firefox 3.0.4 and Adobe Flash (CentOS 5 (32bit))
by Lanny Marcus 22 Dec '08

22 Dec '08

Last night, a visitor was using my daughters box and she was using mine. The web site she was on wanted Adobe Flash or a newer version of Adobe Flash. At that moment, I forgot that I have the Adobe Yum Repository installed. I downloaded the .rpm file from Adobe and when I tried to install it, got a message that a later version is already installed. First thought was the other thread, about Firefox and Adobe for .pdf files. Is this a glitch in the latest version of Firefox we are now using? My box is fully updated. In Add Ons, for Plug Ins, I see Shockwave Flash v. 9.0 r124 and the rest is Mplayer stuff. TIA

9 28

Rebuild xorg (continued from Centos-devel)
by William L. Maltby 22 Dec '08

22 Dec '08

On Sun, 2008-12-21 at 22:48 +0100, Alain PORTAL wrote: > Le dimanche 21 décembre 2008, William L. Maltby a écrit : > > > If you get to single-user with a boot (adding the " 1" in grub edit > > mode), alternate consoles will have some stuff of possible value. > > <CTRL>-<ALT>-<Fx> (where the Fx is function key F1, F2, F3, ...) should > > switch you to other screens. Also, <ALT>-<RIGHT> or <ALT>-<LEFT> can be > > used to cycle through. If X has not been started, the <CTRL> can be > > omitted from that first set I mentioned. > > If I start up in single user mode, I get only one console. No switch possible. > So I start in run-level 3. I forgot about that. Run level 3 is good too. > > Once you are at the root prompt, do the system-config-display with no > > parameters. Looking at the alternate consoles while the config is > > running might be helpful. > > If I run system-config-display in, saying tty1, it start successfully. > If I switch to tty2, then back to tty1, I don't see the system-config-display > dialog any more, just the command I typed before. Drat! Yes, running in text mode, the screen buffer gets lost when you switch virtual terminals. So many things I've forgotten over time. > > > If the system finds _any_ driver it can use - e.g. vga, svga, vesa - it > > should bring up a graphical screen that has a computer icon and some > > tabs for display, multi-head, etc. There's a couple drop-down menus that > > let you select resolution, color depth, etc. > > Unfortunately, resolution is too low (320x200), so, I can't see the "Cancel" > and "Valid" or "OK" button of the system-config-display dialog. Try again with the resolution parameters like Alan suggested but with lower resolution and "vga", e.g. system-config-display --set-resolution=640x480 --set-driver=vga Note that I changed "vesa" to "vga" since the card mentions only vga. I don't know if that will work because I see the "insufficient memory" message you mention below. That may be a result of color depth combined with memory limitations. But if it does work, maybe you get going good enough to proceed. BIOS! That memory thing reminds me. See below. > > > Select something not too "heavy" and save the settings and exit. > > > > If only part of the screen is visible, maybe the screen is scrollable? > > Unfortunately not. > > > Try moving the mouse off the edge (Hmm. Is the mouse working during this > > process? I forgot to test that). > > Mouse is working. > > > 1) Can you get/see what I described at all? > > 2) If you can, and if you make and save changes, you should be able to > > get to a graphical screen later. BUT FIRST ... > > 3) At a root prompt, type dmesg | less and look for any messages that > > might give clues. This might be useful regardless of the results of 2). > > > > Also, there might be useful messages in /var/log/messages > > and /var/log/Xorg.*. > > I don't know if I can post such heavy files here... > This is a devel list, not a user one. > Xorg.0.log is 38Kb and messages is 435Kb ! Not the whole file, just save some of the pertinent lines in a file and copy them into the reply. But maybe this won't be needed. See below about possible BIOS. > > > I don't recall what card you have - nvidia? > > VGA compatible controller: ATI Technologies Inc M71 [Mobility Radeon X2100] > (rev ce) (prog-if 00 [VGA controller]) Well, then you should be able to get any vga or svga compatible mode going. (S)VGA is a well-defined set of standards that if a card says it is compatible, the interface is "standard" and the card says it can support those compatible modes. Since the text mode changes worked with the "vga=" added, there may be some hope yet. > > I think now it's a X server problem as it can't compute modelines for vga > module. I get, in Xorg.0.log, many lines as: > (II) VGA(0): Not using default mode "320x240" (insufficient memory for mode) > > Lines differs in mode value > > (II) VGA(0): Not using default mode "1920x1200" (insufficient memory for mode) > > I know that the 1920x1200 mode is doable. Have you gone into BIOS and seen what is there that might be affecting this stuff? I know there are often selectable modes for video cards. Often in a laptop, main memory is shared with the video card. If you have not allocated enough memory to the video, maybe that is causing a lot of the problems? If you "system" memory is really small, you may not be able to get decent resolution with higher color resolutions. If your BIOS has settings, start off with 4 bit color depth. That gives 16 colors only, but it's a start. Also pick a low resolution, like 640x480 or 800x640(?). Maybe a combination of 4 bit color depth, low resolution, more memory shared with video chip, etc. makes it start working. Oh! Don't forget the video card mode if the BIOS has a setting for it. > > Regards > Alain > <snip> We're starting to get close to the end of things I can think of. I hope something works here! -- Bill

4 7

CentOS-announce Digest, Vol 46, Issue 9
by centos-announce-request＠centos.org 22 Dec '08

22 Dec '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:1036 Critical CentOS 5 i386 firefox Update (Karanbir Singh) 2. CESA-2008:1036 Critical CentOS 5 x86_64 firefox Update (Karanbir Singh) 3. CESA-2008:1037-01: Critical CentOS 2 i386 seamonkey security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Sun, 21 Dec 2008 23:29:01 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:1036 Critical CentOS 5 i386 firefox Update To: centos-announce(a)centos.org Message-ID: <20081221232901.GA7785(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:1036 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-1036.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: ae1e5488a990118e981fc66c50a51138 firefox-3.0.5-1.el5.centos.i386.rpm b2f9c9d438b95005acabf81e630a8049 nspr-4.7.3-2.el5.i386.rpm 660df0bc667dce5c162ecc7cb1e72955 nspr-devel-4.7.3-2.el5.i386.rpm 28e4c0bb69168cfe83c23a1ea0a95ab8 nss-3.12.2.0-2.el5.centos.i386.rpm 119319b0fead3fd067e279a76181a2da nss-devel-3.12.2.0-2.el5.centos.i386.rpm da62af16d032be1d04d843bd66f22165 nss-pkcs11-devel-3.12.2.0-2.el5.centos.i386.rpm 33337ddc040258d62cfe41af0e3aec5d nss-tools-3.12.2.0-2.el5.centos.i386.rpm 65705133b9a371baa0765a5ca837f387 xulrunner-1.9.0.5-1.el5.i386.rpm bc1a4b15890f63e28e17a962676b34eb xulrunner-devel-1.9.0.5-1.el5.i386.rpm 7d3155906887874aac3771c706872ba9 xulrunner-devel-unstable-1.9.0.5-1.el5.i386.rpm Source: ae37ea1ea6ab3140f39ea730f18adc8f firefox-3.0.5-1.el5.centos.src.rpm edd71b910cf8c85ebd2fce5e78687a38 nspr-4.7.3-2.el5.src.rpm 69d75debb1bb5ba2c763f337536557af nss-3.12.2.0-2.el5.centos.src.rpm 90bf1541ee87feb075de908be97c2d31 xulrunner-1.9.0.5-1.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Sun, 21 Dec 2008 23:29:06 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:1036 Critical CentOS 5 x86_64 firefox Update To: centos-announce(a)centos.org Message-ID: <20081221232906.GA7801(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:1036 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-1036.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: b9dc5ff9d150821a8ff143caf6859629 firefox-3.0.5-1.el5.centos.i386.rpm 1abe5e32f0bf94ed63e0af09cd9fda97 firefox-3.0.5-1.el5.centos.x86_64.rpm 59be7e25348ee11ef767001dd4cef821 nspr-4.7.3-2.el5.i386.rpm 5cd4dde36246779ab8407888c9375cbe nspr-4.7.3-2.el5.x86_64.rpm 83b8f2dc24a951680e1516502e0fc82d nspr-devel-4.7.3-2.el5.i386.rpm c2c4394b7a8917f3f6f6cf4e12963d8e nspr-devel-4.7.3-2.el5.x86_64.rpm f14f40e64061cac07d5a3ba93bd371eb nss-3.12.2.0-2.el5.centos.i386.rpm 5907591a199f7f6bf8f577c7ce98e710 nss-3.12.2.0-2.el5.centos.x86_64.rpm 6d9cafb9b7184660f1f3bdd146d0378c nss-devel-3.12.2.0-2.el5.centos.i386.rpm cd763e781124efee13ab303a5574184f nss-devel-3.12.2.0-2.el5.centos.x86_64.rpm 39c06e8a7282405b67f0a2c3b9c62b4f nss-pkcs11-devel-3.12.2.0-2.el5.centos.i386.rpm 8467ab6ed9a73ae3d349387a2d22c65e nss-pkcs11-devel-3.12.2.0-2.el5.centos.x86_64.rpm fd4ac0219311a7804beecff41366972a nss-tools-3.12.2.0-2.el5.centos.x86_64.rpm 842a06642fa6edda245190a7e039afea xulrunner-1.9.0.5-1.el5.i386.rpm ea299fe2b7e69fea7cf1013f151c1d9c xulrunner-1.9.0.5-1.el5.x86_64.rpm 89d743b2df03d096742cc079f5c4d397 xulrunner-devel-1.9.0.5-1.el5.i386.rpm 96070d44105cd6b5eabb1d678eceb91d xulrunner-devel-1.9.0.5-1.el5.x86_64.rpm 0d8fb2a637ad257aa736efd052f2953a xulrunner-devel-unstable-1.9.0.5-1.el5.x86_64.rpm Source: ae37ea1ea6ab3140f39ea730f18adc8f firefox-3.0.5-1.el5.centos.src.rpm edd71b910cf8c85ebd2fce5e78687a38 nspr-4.7.3-2.el5.src.rpm 69d75debb1bb5ba2c763f337536557af nss-3.12.2.0-2.el5.centos.src.rpm 90bf1541ee87feb075de908be97c2d31 xulrunner-1.9.0.5-1.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 22 Dec 2008 13:56:59 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2008:1037-01: Critical CentOS 2 i386 seamonkey security update To: centos-announce(a)centos.org Message-ID: <494F01FB.2060608(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2008:1037-01 Critical: seamonkey security update Files available: seamonkey-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-chat-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-devel-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-dom-inspector-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-js-debugger-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-mail-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-nspr-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-nspr-devel-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-nss-1.0.9-0.25.el2.c2.1.i386.rpm seamonkey-nss-devel-1.0.9-0.25.el2.c2.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 46, Issue 9 **********************************************

1 0

Rebuild libc-client from uw source?
by Noah Miller 22 Dec '08

22 Dec '08

Hi - I'm running CentOS 5.2, and I'm trying to use libc-client, but I'm having some troubles. It seems the pre-built libc-client (2004g) rpm from the yum repository doesn't support the mm_dlog feature. I tried rebuilding from the source rpm, but that didn't help - still no mm_dlog support. I also tried various other libc-client rpms for other RedHat-type systems FC, WhiteBox, etc, but I couldn't find any that worked and had mm_dlog support. My question: Does anybody know what I would need to do to build libc-client from scratch from UW's sources? I tried a basic build and I do get c-client.a, but I definitely don't get any shared object libraries in the output. Thanks, Noah

1 0

Rebuild libc-client from uw source?
by Noah Miller 22 Dec '08

22 Dec '08

Hi - I'm running CentOS 5.2, and I'm trying to use libc-client, but I'm having some troubles. It seems the pre-built libc-client (2004g) rpm from the yum repository doesn't support the mm_dlog feature. I tried rebuilding from the source rpm, but that didn't help - still no mm_dlog support. I also tried various other libc-client rpms for other RedHat-type systems FC, WhiteBox, etc, but I couldn't find any that worked and had mm_dlog support. My question: Does anybody know what I would need to do to build libc-client from scratch from UW's sources? I tried a basic build and I do get c-client.a, but I definitely don't get any shared object libraries in the output. Thanks, Noah

1 0

HAL Daemon failure on boot up
by Dick Roth 22 Dec '08

22 Dec '08

I've been having a problem for a while: when booting, haldaemon will fail, leaving me without CD/DVD and floppy drives available. Has anyone else had this kind of problem? If so, can anyone suggest a solution? Thanks for listening, Dick -- "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin 1755

3 6

BackupPC: two newbie questions
by Timothy Murphy 22 Dec '08

22 Dec '08

I'm running BackupPC under Centos-5.2. 1. Will BackupPC backup files in NFS-mounted directories? If so, is there any simple way of preventing this? 2. I have seen it suggested that it is not a good idea to backup onto a partition on the same drive as the BackupPC server? Is that true? If so, is a partition on a separate drive on the same machine also bad? Ps Apologies if this has been posted before; I have had some problems communicating with mailing lists. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

3 4

Re: [CentOS] OT: Ping failed (SOLVED)
by Jun Salen 22 Dec '08

22 Dec '08

>If the permissions on /bin/ping were incorrect, it may mean that >your system has been cracked. You probably should check by >running ``rpm -V iputils'' which will show changes in any files >in the package. Thanks Bill for your concern and tips, but it is me who accidentally change the file permission when I run chown command with the wrong parameter. Tsk tsk, I guess I am lucky that the machine are just my test machine for evaluating systems. junji aisalen.wordpress.com Linux Registered User #253162 CentOS User New Email names for you! Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/

1 0

BackupPC: 2 newbie questions
by Timothy Murphy 21 Dec '08

21 Dec '08

1. Will BackupPC backup files in NFS-mounted directories? If so, is there any simple way of preventing this? 2. I have seen it suggested that it is not a good idea to backup onto a partition on the same machine as the BackupPC server? Is that true? If so, is a partition on a separate drive on the same machine also bad? Ps I tried asking on the BackupPC mailing list/newsgroup but seem to have failed to communicate in some way.

2 1

AHCI at boot?
by Gordon McLellan 21 Dec '08

21 Dec '08

I'm having trouble getting a Centos installation to boot on a system with hdd's hanging off an AHCI hba. Long ago, I posted about only seeing four of the six sata ports on my asus server board. According to research I've done since then (I now need the ports!), the solution is to enable the AHCI bios, which turns on NCQ and the last two ports. The already installed system does not like the fact I've changed to ahci and does not load the ahci module, eventually failing to boot complaining it cannot mount the root fs, killing init, etc. If I boot off the 5.2 installation dvd or a fedora 9 dvd, the kernel boots just fine, loads up the ahci module and sees the drives no problem. So I'm wondering what config files I need to tweak, to help the already installed system use the "new" ahci controller? Previously, it appears to have been using the piix module to access the drive with the root fs on it. I'm using the 64-bit 2.6.18-92.1.18 centosplus kernel (for XFS support). The box is running an asus dsbf-de board, with 2x e5405 cpus and 16g of ram. There are six drives on the ahci, one 80g "system" drive (the boot drive), and five 750g storage drives. There is also a supermicro 8 port sata hba in the system, with five 250g drives on it. The supermicro uses the sata_mv module and is detected just fine. Thanks for any suggestions! Gordon

2 3

Kerberos for squid auth
by Joseph L. Casale 21 Dec '08

21 Dec '08

When you use kinit to acquire a Kerberos ticket prior to joining a Win2k3 domain with net ads join -U <upn> is that ticket merely used for the join that follows? When it expires does this mean anything? Thanks, jlc

2 3

FTPS setup problem
by Guy Boisvert 21 Dec '08

21 Dec '08

Hi! I'm trying to figure out what's going wrong with a "simple" FTPS setup and VSFTPD. I saw references on Google and tried, and tried, and tried... without success. I'll start by explaining my situation: I have a WEB development server behind a firewall. It's currently only for the intranet. We now have an external company that will have to do a new website for us and we want them to access securely our development server. Internally, we access it with regular FTP (we use DreamWeaver 8). In the references i saw, i'd just add the following lines and it is supposed to work: ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=NO ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=NO rsa_cert_file=/etc/vsftpd/vsftpd.pem Here are the previous lines in my vsftpd config: anonymous_enable=YES local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES xferlog_std_format=YES chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd/vsftpd.chroot_list pam_service_name=vsftpd userlist_enable=YES listen=YES tcp_wrappers=YES I generated the PEM cert with the following command: openssl req -x509 -nodes -days 365 -newkey rsa:1024 -keyout /etc/vsftpd/vsftpd.pem -out /etc/vsftpd/vsftpd.pem I tried to connect with FileZilla without luck. I heard that FileZilla may have a problem with vsftpd in FTPS mode so i downloaded SmartFTP which i read should be able to connect. When i try, i get this error message: SSL/TLS client handshake failed (Error = 0x80090308) Does anybody could give me a pointer on this? Thanks in advance and happy holidays to everybody! Guy Boisvert, ing IngTegration inc. _______________________________________________________________ Pre-Boxing Day Domain Sales: Hosting + Domain = US$4.95/year Offer Ends: Dec 31, 2008. http://www.doteasypromo.com

8 25

flash fails to work on Los Angeles Times website - fix
by Mark Pryor 21 Dec '08

21 Dec '08

Hello, I have a 32-bit install of C5.2 on my Intel Centrino Laptop (2005). The Adobe flash plugin works fine in Firefox in all cases except on the Los Angeles Times website http://www.latimes.com. I was baffled by this for a few months, since it works on another 32-bit C5.2 box. When I realized that the only real difference was that the laptop had no LAMP install, and both had the same elaborate set of hosts redirects (to avoid adverts), it seemed reasonable that the /etc/hosts file might be the culprit. Sure enough, both boxes had this line in the redirects ----------- /etc/hosts ------------ 127.0.0.1 ad.doubleclick.net ----------- end snip --------- I could see that flash was hanging on the laptop when it looked for a response from ad.doubleclick.net In order to fix the bug, I commented out the line. Flash now worked! In order to avoid the advert, I changed 127.0.0.1, to another private LAMP install on my home network (192.168.1.104). Problem solved. At the very least this redirect needs to return a response, or the flash video will hang and never start. This is true for the LA Times implementation of adverts, at least. Maybe your newspaper sites behave similarly. My 2cents worth of troubleshooting, Mark

3 2

Web based ssl VPN
by Dnk 19 Dec '08

19 Dec '08

Can anyone recommend one to run under CentOS? Dnk Sent from my iPhone

3 4

Re: [CentOS] Web based ssl VPN
by Tim Nelson 19 Dec '08

19 Dec '08

Have you looked at SSL-Explorer? Erm... I mean Adito? SSL-Explorer appears to have been taken over by Barracuda but still forked into Adito. Linky links: http://sourceforge.net/projects/adito BTW: Sent from my web based mail system on my workstation at my desk in my office in Duluth, Minnesota, United States, North America, Earth, etc... you get the idea... :) Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 ----- "Dnk" <d.k.emaillists(a)gmail.com> wrote: > Can anyone recommend one to run under CentOS? > > Dnk > > Sent from my iPhone > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

2 2

problem of apt
by cjzjm100 19 Dec '08

19 Dec '08

Hi all ! Today the apt had a problem,here is the result: [cjzjm100@localhost ~]$ sudo apt-get install nautilus-sendtoPassword:/var/lib/apt/lists/mrepo_rhel5s-i386_RPMS.os_repodata_repomd.xml:1: parser error : Start tag expected, '<' not found ^apt-get: rpm/rpmindexfile.cc：645：std::string rpmRepomdIndex::IndexURI(std::string) const: “Res.size() > 0”failed.gave up.

2 1

Re: [CentOS] OT: Ping failed (SOLVED)
by Jun Salen 19 Dec '08

19 Dec '08

>From what I can see nagios' check_ping monitor executes /bin/ping, >in which case you need to make sure /bin/ping is owned by root >and is setuid (chmod u+s /bin/ping) > >nate That solved it. Same with file permission with mount, umount, su, and ping6. Thank you very much. Get your new Email address! Grab the Email name you've always wanted before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/

2 1

Adding RAM
by Matt 18 Dec '08

18 Dec '08

I have a server running Centos 4.7 32bit. Will moving from 4Gig of RAM to 8Gig do any good? Since its 32bit I assume it will only be able to address the first 4Gig not? When I installed CentOS I did not do anything special to enable using more then 4Gig if thats required. Exim, spamassassin and Clamd seem to be the biggest load on this machine. My biggest bottle neck is disk I/O anyway. Wish I had installed CentOS 5.x 64bit way back when but some of the software I was using at time listed support for it as beta. Matt

16 40

nfs slow?
by Davide Cittaro 18 Dec '08

18 Dec '08

Hi all, I'm migrating from Gentoo to CentOS... I'm experiencing a rather low performance in NFS r/w (as client). NFS server is solaris (which exports zfs volumes via nfs). The very same exports were mounted with the same parameters (auto,nosuid,exec) on gentoo and centos server (bot x86_64)... It happens that centos is 5-10 times slower either in read and write operations... Ok, I'll try to tune rsize and wsize, but does anybody have an hint on this low performance? Thanks d Davide Cittaro davide.cittaro(a)ifom-ieo-campus.it

12 25

cpuspeed problems with 5.2 and 2.6.18-92.1.18 kernel revision
by ArcosCom Linux User 18 Dec '08

18 Dec '08

After upgrade my laptop, I discovered a low performance on it. The laptop is a 2,73GHz Intel centrino and from some kernels versions to now, it had a good performance, the cpu scaling worked fine. Now, I discover that forcing in /etc/sysconfig/cpuspeed the governors and/or max/min speeds, it don't want to run more quickly. The laptop boots fine with the correct speed (usual speed), but when the init scripts run the service cpuspeed, the performance goes low: Only wants 800MHz!! Yes, I played with the documentation and the values on it, but the problem began before I touch them. I discovered the problem after upgrade the kernel (some weeks ago). Its very curious that if I power off/on or reboot the laptop, the next boot is with low speed, but if I power off, wait for 10 minutes, and power on again, the laptop boots at normal speed but when cpuspeed service goes up, the speed goes to low. I can't change the speed using gnome or manually writing to /sys/devices/cpu/cpu0/ system files. Has anybody got any problem as this? How to solve or work around (running an old kernel is an option)? Has any relationship with gnome cpuspeed monitor or any gnome component? Thanks Regards

7 14

RAID 1 Post Install
by Hal Martin 18 Dec '08

18 Dec '08

Hello all, I've got CentOS 5.2 installed on an old Pentium III server. The server is used by a club at my school, and they are rapidly running out of room on the internal IDE drives that are configured in software RAID 1. I have a Silicon Image SATA controller in the server, and I was planning on adding two more SATA hard drives to the computer. Is there a GUI like Disk Druid for initializing hard drives in software RAID 1 *after* the system has been installed? Thanks, Hal

5 6

OT: Ping failed
by Jun Salen 18 Dec '08

18 Dec '08

Hi, The Ping service in Nagios has "unknown" status which was previously OK, this happens after i messed up some of the files owner and accidentally change it to Apache. Although I restored most of the file permission back to Root, the problem above still appears which I suspect is due to permission. Does anybody have idea where to look at. Thanks, junji aisalen.wordpress.com Linux Registered User #253162 CentOS User New Email names for you! Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/

2 1

glibc
by Mad Unix 18 Dec '08

18 Dec '08

Am having the following error: [root@intra.sdc:rescue]$yum update glibc Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * base: mirror.silyus.net * updates: mirror.silyus.net * addons: centos.intergenia.de * extras: centos.intergenia.de Excluding Packages in global exclude list Finished Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package glibc.x86_64 0:2.5-24.el5_2.2 set to be updated --> Processing Dependency: glibc-common = 2.5-24.el5_2.2 for package: glibc --> Running transaction check --> Processing Dependency: glibc-common = 2.5-24 for package: glibc Error: No Package Matching glibc.i686 [root@intra.sdc:rescue]$ Thanks

3 3

suspend/resume system crash
by Sergej Kandyla 17 Dec '08

17 Dec '08

Hi all, I've installed CentOS 5.2 i386 (with all updates) on notebook Fujutsu Siemens Esprimo U9200 Suspending works normal, but after resuming my system crashes. There are no messages about that in /var/log/messages, only after reboot system I see in gnome: " Resume Problem Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems. " Other hardware works normal, my lspci: # lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14) 06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 04) model name : Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz MemTotal: 2066004 kB Could you give me some advice how to fix suspend\resume ? Thanks

4 4

yum udpate not getting new kernel
by Robert Moskowitz 17 Dec '08

17 Dec '08

On one notebook (so far), I have not picked up the new kernel: kernel-2.6.18-92.1.22.el5.i686.rpm I have gotten it on some notebooks. So far the only difference I can see between the systems that MIGHT matter is those that got the update were new installs and had not reached 3 installed kernels. The one that failed already had 3 kernels in /boot. But I seem to recall this was about how many to keep in /boot, not when to stop receiving them....

5 13

vim helpfile tag issues
by Spiro Harvey 17 Dec '08

17 Dec '08

Just wondering if anyone can replicate this issue.... On CentOS 5.2, using vim 7.0.237, I'm having a consistent issue across all my centos boxen. if I try and access the help files direct (as root), such as ":help tutor" I get: "usr_01.txt.gz" [readonly][noeol][converted] 11L, 4393C E434: Can't find tag pattern Press ENTER or type command to continue If I press enter, it shows me what appears to be the output of a binary. looking at that top line, it appears as if the help files are compressed, and it can't read the tags within them. Is there a satellite package I need to unpack or enable the ability for vim to decipher these? If I just type ":help" the status line reads: "help.txt" [readonly] 214L, 7883C which is ok, and the text file is displayed correctly. Under Fedora 9, doing a ":help tutor" works correctly, and the status line reads: "usr_01.txt.gz" [readonly][noeol] 11L, 2914C Note the different tag on the centos boxen "[converted]".. Also, /usr/share/vim/vimxx/doc/ seem to be pretty similar (given that Fed9 is vim7.1 and CentOS is 7.0).... even the tags file looks ok on both ends: Fed9: $ grep tutor tags sql-completion-tutorial sql.txt.gz /*sql-completion-tutorial* tutor usr_01.txt.gz /*tutor* vimtutor usr_01.txt.gz /*vimtutor* CentOS 5.2: # grep tutor tags sql-completion-tutorial sql.txt.gz /*sql-completion-tutorial* tutor usr_01.txt.gz /*tutor* vimtutor usr_01.txt.gz /*vimtutor* -- Spiro Harvey Knossos Networks Ltd 021-295-1923 www.knossos.net.nz

6 14

CentOS-announce Digest, Vol 46, Issue 8
by centos-announce-request＠centos.org 17 Dec '08

17 Dec '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:1017 Important CentOS 5 i386 kernel Update (Karanbir Singh) 2. CESA-2008:1017 Important CentOS 5 x86_64 kernel Update (Karanbir Singh) 3. CESA-2008:1037 Critical CentOS 3 i386 seamonkey - security update (Tru Huynh) 4. CESA-2008:1037 Critical CentOS 3 x86_64 seamonkey - security update (Tru Huynh) 5. CESA-2008:0973 Important CentOS 3 i386 kernel - security and bug fix update (Tru Huynh) 6. CESA-2008:0973 Important CentOS 3 x86_64 kernel - security and bug fix update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 17 Dec 2008 00:06:25 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:1017 Important CentOS 5 i386 kernel Update To: centos-announce(a)centos.org Message-ID: <20081217000625.GA14155(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:1017 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-1017.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: ae36496ab708163804ed08e79021c0e6 kernel-2.6.18-92.1.22.el5.i686.rpm 1138d39b9181ab992561d68406bc962f kernel-debug-2.6.18-92.1.22.el5.i686.rpm 5302c5708d6b9acc20c4301988c3bb7a kernel-debug-devel-2.6.18-92.1.22.el5.i686.rpm ab7cb2118f3df67c799630a1e15c3534 kernel-devel-2.6.18-92.1.22.el5.i686.rpm df45d2c2cbcb2b3f51daaae34f826ad7 kernel-doc-2.6.18-92.1.22.el5.noarch.rpm fdd423f688cc5046a3b51bae39ef65f8 kernel-headers-2.6.18-92.1.22.el5.i386.rpm ad291167b47947aed1683e9c6e8b4f4a kernel-PAE-2.6.18-92.1.22.el5.i686.rpm f6744092d36abb059f75eca6d87c8b0d kernel-PAE-devel-2.6.18-92.1.22.el5.i686.rpm 3a227bef86380bd5cd0c87ec517f02af kernel-xen-2.6.18-92.1.22.el5.i686.rpm f4f1ea994113c05361c2d8022de1aa02 kernel-xen-devel-2.6.18-92.1.22.el5.i686.rpm Source: 4c322d470d8c9c07e2174199f9cc27d3 kernel-2.6.18-92.1.22.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 17 Dec 2008 00:06:30 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:1017 Important CentOS 5 x86_64 kernel Update To: centos-announce(a)centos.org Message-ID: <20081217000630.GA14171(a)vkalu.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:1017 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-1017.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 430fd7a6b1073a7b9ea0461c86960d56 kernel-2.6.18-92.1.22.el5.x86_64.rpm b07ace8de31c4e7c39374ca2e53e285d kernel-debug-2.6.18-92.1.22.el5.x86_64.rpm f0b21fe6d34d121d1b78b0a228338170 kernel-debug-devel-2.6.18-92.1.22.el5.x86_64.rpm f4bb6548e24878fe4cfa58d9ea624683 kernel-devel-2.6.18-92.1.22.el5.x86_64.rpm 2a500b4115e8cfdf896a8cde46dc726b kernel-doc-2.6.18-92.1.22.el5.noarch.rpm 2ced664fa981404c3cd98f47b5266cc0 kernel-headers-2.6.18-92.1.22.el5.x86_64.rpm 2b355d674fa6e22831e12425933f31de kernel-xen-2.6.18-92.1.22.el5.x86_64.rpm c5e7690e4999825327608bc690f8e6e3 kernel-xen-devel-2.6.18-92.1.22.el5.x86_64.rpm Source: 4c322d470d8c9c07e2174199f9cc27d3 kernel-2.6.18-92.1.22.el5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 17 Dec 2008 16:28:51 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2008:1037 Critical CentOS 3 i386 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20081217152851.GA19281(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2008:1037 seamonkey security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-1037.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/seamonkey-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-chat-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-devel-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-dom-inspector-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-js-debugger-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-mail-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nspr-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nspr-devel-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nss-1.0.9-0.29.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nss-devel-1.0.9-0.29.el3.centos3.i386.rpm source: updates/SRPMS/seamonkey-1.0.9-0.29.el3.centos3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update seamonkey Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

RPM rollback/repackage with CentOS 4
by santisaez＠woop.es 17 Dec '08

17 Dec '08

Hi, Is there any way to list availabe RPM rollback's and timestamps in CentOS 4? It's possible to get RPM rollbacks with up2date, but appears that's deprecated ;-( # up2date --list-rollbacks This feature is deprecated and no longer functional I want a method to list current available rollback and the timestamp: http://www.linuxjournal.com/article/7034 How do you deal with this feature? Is there any plugin for Yum? Now I list packages from "/var/spool/repackage/" and install/rollback manually, but I would prefer something more straightforward. Regards, -- Santi Saez http://woop.es

2 1

Capture NX 1 vs 2
by Mike -- EMAIL IGNORED 17 Dec '08

17 Dec '08

I have Capture NX 1. Is it worth spending money to get Capture NX 2? Why? Thanks, Mike.

1 1

Bug - Error: Missing Dependency: libgaim.so.0 is needed by package nautilus-sendto
by Kenneth Burgener 17 Dec '08

17 Dec '08

I have a minimal installation of CentOS, and I wanted to then install X Windows and the GNOME desktop. I then tried the following, which failed on a dependency: $ yum -y groupinstall "X Window System" "GNOME Desktop Environment" --> Running transaction check ---> Package nautilus-sendto.i386 0:0.7-5.fc6 set to be updated --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto ---> Package opensp.i386 0:1.5.2-4 set to be updated --> Finished Dependency Resolution Error: Missing Dependency: libgaim.so.0 is needed by package nautilus-sendto So GNOME appears to be missing some dependencies in the yum repository. I finally gave up and installed KDE, which installed flawlessly: $ yum -y groupinstall "X Window System" "KDE (K Desktop Environment)" I assume this is a bug with the GNOME packages (required dependency not found). Is this a CentOS issue, or an "upstream" issue? Thanks, Kenneth

2 2

[OT] stable algorithm with complexity O(n)
by David Hláčik 17 Dec '08

17 Dec '08

Hi guys, i am really sorry for making offtopic, hope you will not kill me, but this is for me life important problem which needs to be solved within next 12 hours.. I have to create stable algorithm for sorting n numbers from interval [1,n^2] with time complexity O(n) . Can someone please give me a hint. Would be very very thankful! Thanks in advance! D.

6 12

Bogus ssh complaints about dns
by drew einhorn 17 Dec '08

17 Dec '08

Hi, If I ssh to a CentOS5 box using just the hostname, not the full name, resulting from appending domain name from the search record in resolv.conf it says the ip maps to the correct full name it gets from reverse dns, and claims the full name does not map back to the ip, but it does as verified by both nslookup and dig If I ssh to the full name instead of the short name, the I don't get these complaints. The short term work around is to make sure all scripts use the full name, instead of the short name without the domain. But that is very annoying. I browsed through the man pages for ssh, sshd, ssh_config, and sshd_config and did not spot anything that was misconfigured. But I could have missed something -- Drew Einhorn

2 2

Yum messages: /usr/lib/liblzo.so.1 is not a symbolic link
by William L. Maltby 16 Dec '08

16 Dec '08

Ran yum update this A.M. Got this. Is it a problem for rpmforge, CentOS or just me? Maybe not a problem at all? /etc/ld.so.conf.d files are "box stock", so there were no clues there. TIA for any insight. =================================================== Running Transaction Updating : cups-libs [ 1/10] /sbin/ldconfig: /usr/lib/liblzo.so.1 is not a symbolic link Updating : libpurple [ 2/10] /sbin/ldconfig: /usr/lib/liblzo.so.1 is not a symbolic link <snip> Cleanup : libpurple [ 7/10] /sbin/ldconfig: /usr/lib/liblzo.so.1 is not a symbolic link Cleanup : cups-libs [ 8/10] /sbin/ldconfig: /usr/lib/liblzo.so.1 is not a symbolic link Cleanup : enscript [ 9/10] Cleanup : pidgin [10/10] =================================================== $ rpm -q --whatprovides /usr/lib/liblzo.so.1 lzo-1.08-5.el5.rf $ls -ld /usr/lib/liblzo.so.1 -rwxr-xr-x 1 root root 406394 Nov 4 02:39 /usr/lib/liblzo.so.1 $ rpm -q libpurple enscript pidgin libpurple-2.5.2-6.el5 enscript-1.6.4-4.1.1.el5_2 pidgin-2.5.2-6.el5 =================================================== Updated: cups.i386 1:1.2.4-11.18.el5_2.3 cups-libs.i386 \ 1:1.2.4-11.18.el5_2.3 enscript.i386 0:1.6.4-4.1.1.el5_2 \ libpurple.i386 0:2.5.2-6.el5 pidgin.i386 0:2.5.2-6.el5 Complete! =================================================== -- Bill

3 7

Emailing jpeg images with Evolution 2.8.0
by Andrew Allen 16 Dec '08

16 Dec '08

I recently emailed an important jpeg image to a colleague, but when he tried to insert it into a document it 'failed'. It appears that when jpegs are attached to messages, they become 'corrupted' - is this a known problem with evolution, and/or is there a way of solving the problem? Andy

5 6

Force to install 64 bit packages only
by Sergio Belkin 16 Dec '08

16 Dec '08

How to configure yum for install only 64 bit packages? thanks in advance -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

5 6

IBM Type 8795-1ux LTO-3
by Sergio Belkin 16 Dec '08

16 Dec '08

I have an LTO-3 as described in the subject. I've installed lin_tape and lin_taped RPMs for RHEL 5 but still it doesn't work. /var/log/lin_tape.trace has: /dev/IBMtape opened. lin_taped Tue Dec 16 15:53:18 2008 Failed to detect any tape drives. lin_taped Tue Dec 16 15:53:18 2008 Failed to detect any changer devices. IBMtapeDevDriver Tue Dec 16 15:53:18 2008 lin_tape_add_class_device() entry lin_tape_add_class_device() entry lin_tape_add_class_device() entry lin_tape_add_class_device() entry How can I solve it? Thanks in advance -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

1 0

sendmail outbound help needed
by Gopinath Achari 16 Dec '08

16 Dec '08

Hi All, I want to set up a sendmail server on Centos 5.2 Pc. This server should be able to send and receive mails outbound. i have purchased a domain name. can you help on this. -- Regards, Gopinath M

5 4

CentOS-announce Digest, Vol 46, Issue 7
by centos-announce-request＠centos.org 16 Dec '08

16 Dec '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:1028 Moderate CentOS 3 s390(x) cups - security update (Pasi Pirhonen) 2. CESA-2008:1021 Moderate CentOS 3 s390(x) enscript - security update (Pasi Pirhonen) 3. CESA-2008:1021 Moderate CentOS 4 ia64 enscript - security update (Pasi Pirhonen) 4. CESA-2008:1023 Moderate CentOS 4 ia64 pidgin - security update (Pasi Pirhonen) 5. CESA-2008:1021 Moderate CentOS 3 i386 enscript - security update (Tru Huynh) 6. CESA-2008:1021 Moderate CentOS 3 x86_64 enscript - security update (Tru Huynh) 7. CESA-2008:1028 Moderate CentOS 3 i386 cups - security update (Tru Huynh) 8. CESA-2008:1028 Moderate CentOS 3 x86_64 cups - security update (Tru Huynh) 9. CESA-2008:1021-02: Moderate CentOS 2 i386 enscript security update (John Newbigin) 10. CESA-2008:1023 Moderate CentOS 5 i386 pidgin Update (Karanbir Singh) 11. CESA-2008:1023 Moderate CentOS 5 x86_64 pidgin Update (Karanbir Singh) 12. CESA-2008:1023 Moderate CentOS 5 i386 enscript Update (Karanbir Singh) 13. CESA-2008:1023 Moderate CentOS 5 x86_64 enscript Update (Karanbir Singh) 14. CESA-2008:1016 Moderate CentOS 5 i386 enscript Update (Karanbir Singh) 15. CESA-2008:1016 Moderate CentOS 5 x86_64 enscript Update (Karanbir Singh) 16. CESA-2008:1029 Moderate CentOS 5 i386 cups Update (Karanbir Singh) 17. CESA-2008:1029 Moderate CentOS 5 x86_64 cups Update (Karanbir Singh) 18. Re: CESA-2008:1023 Moderate CentOS 5 i386 enscript Update (Karanbir Singh) 19. Re: CESA-2008:1023 Moderate CentOS 5 x86_64 enscript Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Dec 2008 19:10:56 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:1028 Moderate CentOS 3 s390(x) cups - security update To: centos-announce(a)centos.org Message-ID: <20081215171056.GD13827(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:1028 https://rhn.redhat.com/errata/RHSA-2008-1028.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/cups-1.1.17-13.3.55.s390.rpm updates/s390/RPMS/cups-devel-1.1.17-13.3.55.s390.rpm updates/s390/RPMS/cups-libs-1.1.17-13.3.55.s390.rpm s390x: updates/s390x/RPMS/cups-1.1.17-13.3.55.s390x.rpm updates/s390x/RPMS/cups-devel-1.1.17-13.3.55.s390x.rpm updates/s390x/RPMS/cups-libs-1.1.17-13.3.55.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

kontact request
by Gopinath Achari 16 Dec '08

16 Dec '08

Hi All, I am using kontact (internally uses kmail) as mail client. when i receive attachments in mail. its displayed in smart format as default. How can i set inline as default. any idea on this option. -- Regards, Gopinath M

2 1

Problems compiling PostgreSQL package from FC8 on CentOS 5
by Peter Hopfgartner 16 Dec '08

16 Dec '08

Dear CentOS list we are a small software company making mostly web driven GIS software. We started to simplify out sysadmin life making RPM packages of most of the GIS software stack. For a dependency issue we had to abandon the upstream 8.1 PostgreSQL and install at least a 8.2 version. Taking the package from Fedora 8 and rebuilding it for x86_64 went smoothly. Unfortunatly the same is not true for i386. It stops with: checking for collateindex.pl... no checking for sgmlspl... no checking thread safety of required library functions... no configure: error: thread test program failed This platform is not thread-safe. Check the file 'config.log' for the exact reason. You can use the configure option --enable-thread-safety-force to force threads to be enabled. But you must then run the program in src/test/thread and add locking function calls to your applications to guarantee thread safety. error: Bad exit status from /home/peter.hopfgartner/rpmbuild/tmp/rpm-tmp.77591 (%build) RPM build errors: Bad exit status from /home/peter.hopfgartner/rpmbuild/tmp/rpm-tmp.77591 (%build) The temporary file is: #!/bin/sh RPM_SOURCE_DIR="/home/peter.hopfgartner/rpmbuild/SOURCES" RPM_BUILD_DIR="/home/peter.hopfgartner/rpmbuild/BUILD" RPM_OPT_FLAGS="-O2 -g -march=i386 -mcpu=i686" RPM_ARCH="i386" RPM_OS="linux" export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS RPM_DOC_DIR="/usr/share/doc" export RPM_DOC_DIR RPM_PACKAGE_NAME="postgresql" RPM_PACKAGE_VERSION="8.2.11" RPM_PACKAGE_RELEASE="1" export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE RPM_BUILD_ROOT="/home/peter.hopfgartner/rpmbuild/tmp/postgresql-8.2.11-1-root" export RPM_BUILD_ROOT set -x umask 022 cd /home/peter.hopfgartner/rpmbuild/BUILD cd postgresql-8.2.11 CFLAGS="${CFLAGS:--O2 -g -march=i386 -mcpu=i686}" ; export CFLAGS CXXFLAGS="${CXXFLAGS:--O2 -g -march=i386 -mcpu=i686}" ; export CXXFLAGS # Strip out -ffast-math from CFLAGS.... CFLAGS=`echo $CFLAGS|xargs -n 1|grep -v ffast-math|xargs -n 100` CFLAGS="${CFLAGS:--O2 -g -march=i386 -mcpu=i686}" ; export CFLAGS ; CXXFLAGS="${CXXFLAGS:--O2 -g -march=i386 -mcpu=i686}" ; export CXXFLAGS ; FFLAGS="${FFLAGS:--O2 -g -march=i386 -mcpu=i686}" ; export FFLAGS ; ./configure --host=i686-redhat-linux-gnu --build=i686-redhat-linux-gnu \ --target=i386-redhat-linux \ --program-prefix= \ --prefix=/usr \ --exec-prefix=/usr \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ --sysconfdir=/etc \ --datadir=/usr/share \ --includedir=/usr/include \ --libdir=/usr/lib \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/usr/com \ --mandir=/usr/share/man \ --infodir=/usr/share/info --disable-rpath \ --with-perl \ --with-tcl \ --with-tclconfig=/usr/lib \ --with-python \ --with-openssl \ --with-pam \ --with-krb5 \ --enable-nls \ --enable-thread-safety \ --sysconfdir=/etc/sysconfig/pgsql \ --datadir=/usr/share/pgsql \ --with-docdir=/usr/share/doc make all make -C contrib all make -C contrib/xml2 all # Have to hack makefile to put correct path into tutorial scripts sed "s|C=\`pwd\`;|C=/usr/lib/pgsql/tutorial;|" < src/tutorial/Makefile > src/tutorial/GNUmakefile make -C src/tutorial NO_PGXS=1 all rm -f src/tutorial/GNUmakefile pushd src/test/regress make all make MAX_CONNECTIONS=5 check make clean popd pushd src/test/regress make RPMTESTING=1 all popd PYTHON=/usr/bin/python python_version=`${PYTHON} -c "import sys; print sys.version[:3]"` python_prefix=`${PYTHON} -c "import sys; print sys.prefix"` python_includespec="-I${python_prefix}/include/python${python_version}" pushd PyGreSQL gcc $CFLAGS -fpic -shared -o _pgmodule.so ${python_includespec} -I../src/interfaces/libpq -I../src/include -L../src/interfaces/libpq -lpq pgmodule.c popd pushd Pgtcl # pgtcl's configure only handles one include directory :-( ./configure --prefix=/usr \ --libdir=/usr/lib \ --with-tcl=/usr/lib \ --with-postgres-include="../src/interfaces/libpq -I../src/include" \ --with-postgres-lib=../src/interfaces/libpq # note: as of pgtcl 1.5.2, its makefile is not parallel-safe make all popd exit 0 Does anybody have any hint how to proceed? Regards, Peter -- Dott. Peter Hopfgartner R3 GIS Srl - GmbH Via Johann Kravogl-Str. 2 I-39012 Meran/Merano (BZ) Email: peter.hopfgartner(a)r3-gis.com Tel. : +39 0473 494949 Fax : +39 0473 069902 www : http://www.r3-gis.com

3 4

utility to find which /dev/videoX
by Jerry Geis 16 Dec '08

16 Dec '08

is there a utility or SOME method to determine which /dev/videoX (like /dev/video0 or /dev/video1) is being used by a device??? Example I have a USB camera and a USB TV module how do I determine which device is on /dev/video0 and which is on /dev/video1 I have seen perhaps a way in dmesg but I am looking for the BEST way and the correct way. Thanks, Jerry

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss