- Discuss - lists.centos.org

Fwd: P5GC SATA mode problem
by Eduardo Grosclaude 10 Oct '08

10 Oct '08

Hello, I'm top-posting my own thread with some homework I've done, can somebody help? In short, the problem is that kernel 2.6.18-53 (as per 5.1 installation) works OK while any kernel update makes booting impossible in Enhanced SATA mode. For newer kernels, only Compatible mode works, but at a very heavy cost in performance. The motherboard is ASUS P5GC-MX and the disk is ATA WDC WD3200AAJS-6. More detail in my own former message at the end. 1. I have tried pci=nommconf, noacpi, acpi=off. Any other hints? 2. I've opened up both initrd files (initrd-2.6.18-53.el5.img, which works in "SATA/enhanced" mode, and the newer initrd-2.6.18-92.1.13.el5.img, which only works in "compatible") and found practically no differences (USB modules are loaded in a different order and that's about it). 3. In the hope that I could build up a working kernel (albeit sacrificing ease of update) I tried to figure out some useful config. I've scanned both config-XXX files but I am unable to identify any reasonable suspects either, diff provided below. Should SCSI-SAS-ATA be different? 4. Just to play a while, attempted to make mrproper and got the following. Same for make clean. [root@localhost 2.6.18-92.1.13.el5-i686]# make mrproper scripts/Makefile.clean:17: /usr/src/kernels/2.6.18-92.1.13.el5-i686/drivers/infiniband/hw/amso1100/Makefile: No such file or directory make[3]: *** No rule to make target `/usr/src/kernels/2.6.18-92.1.13.el5-i686/drivers/infiniband/hw/amso1100/Makefile'. Stop. make[2]: *** [drivers/infiniband/hw/amso1100] Error 2 make[1]: *** [drivers/infiniband] Error 2 make: *** [_clean_drivers] Error 2 So it seems 5.2's kernel really doesn't like me. Now, my questions: 1. What is going on? What can I read to understand a bit more? 2. As for the disk drive behaviour, should I file a bug? I haven't found any related known bugs. Does it depend on whether ASUS P5GC-MX is or not on the HW CL? 3. Is it on the HW CL anyway? I assume it is, from what I read at http://www.linux-tested.com/results/asus_p5gc-mx.html 4. As for the kernel compile error, what is going on again? Any hints deeply appreciated! Thank you in advance CONFIGs DIFF OUTPUT ------------------------------- 3,4c3,4 < # Linux kernel version: 2.6.18-53.el5 < # Mon Nov 12 02:16:55 2007 --- > # Linux kernel version: 2.6.18-92.1.13.el5 > # Wed Sep 24 19:27:25 2008 189a190,191 > CONFIG_ISCSI_IBFT_FIND=y > CONFIG_ISCSI_IBFT=m 399a402 > CONFIG_XFRM_NALGO=m 483a487 > CONFIG_IPV6_OPTIMISTIC_DAD=y 800a805 > CONFIG_NL80211=y 803a809 > CONFIG_MAC80211_RCSIMPLE=y 806,812c812 < CONFIG_MAC80211_DEBUG=y < # CONFIG_MAC80211_VERBOSE_DEBUG is not set < # CONFIG_MAC80211_LOWTX_FRAME_DUMP is not set < # CONFIG_TKIP_DEBUG is not set < # CONFIG_MAC80211_DEBUG_COUNTERS is not set < # CONFIG_MAC80211_IBSS_DEBUG is not set < # CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set --- > # CONFIG_MAC80211_DEBUG is not set 1130a1131 > CONFIG_SCSI_SAS_ATA=y 1220a1222 > # CONFIG_PATA_ACPI is not set 1229a1232 > # CONFIG_PATA_CS5536 is not set 1245a1249 > # CONFIG_PATA_NS87415 is not set 1281a1286,1287 > CONFIG_DM_MULTIPATH_HP=m > CONFIG_DM_UEVENT=y 1290c1296 < CONFIG_FUSION_MAX_SGE=40 --- > CONFIG_FUSION_MAX_SGE=128 1292a1299 > CONFIG_FUSION_LOGGING=y 1399c1406,1407 < # CONFIG_SUNDANCE is not set --- > CONFIG_SUNDANCE=m > # CONFIG_SUNDANCE_MMIO is not set 1439a1448 > CONFIG_IXGBE=m 1445a1455,1457 > CONFIG_BNX2X=m > CONFIG_MLX4_CORE=m > CONFIG_MLX4_DEBUG=y 1524,1525d1535 < CONFIG_IWLWIFI=y < CONFIG_IWLWIFI_DEBUG=y 1526a1537,1540 > CONFIG_IWL4965_QOS=y > CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y > CONFIG_IWL4965_SENSITIVITY=y > # CONFIG_IWL4965_DEBUG is not set 1879c1893,1894 < # CONFIG_IPMI_PANIC_EVENT is not set --- > CONFIG_IPMI_PANIC_EVENT=y > CONFIG_IPMI_PANIC_STRING=y 1905a1921 > # CONFIG_HP_WATCHDOG is not set 1981,1986c1997,2002 < < # < # TPM devices < # < # CONFIG_TCG_TPM is not set < # CONFIG_TELCLOCK is not set --- > CONFIG_TCG_TPM=m > CONFIG_TCG_TIS=m > CONFIG_TCG_NSC=m > CONFIG_TCG_ATMEL=m > CONFIG_TCG_INFINEON=m > CONFIG_TELCLOCK=m 2515a2532 > CONFIG_USB_NET_DM9601=m 2647,2650d2663 < < # < # InfiniBand support < # 2653a2667 > CONFIG_INFINIBAND_USER_MEM=y 2660a2675,2677 > CONFIG_INFINIBAND_NES=m > # CONFIG_INFINIBAND_NES_DEBUG is not set > CONFIG_MLX4_INFINIBAND=m 2662c2679 < # CONFIG_INFINIBAND_IPOIB_CM is not set --- > CONFIG_INFINIBAND_IPOIB_CM=y 2669,2671c2686,2688 < CONFIG_INFINIBAND_VNIC=m < # CONFIG_INFINIBAND_VNIC_DEBUG is not set < CONFIG_INFINIBAND_VNIC_STATS=y --- > CONFIG_INFINIBAND_QLGC_VNIC=m > # CONFIG_INFINIBAND_QLGC_VNIC_DEBUG is not set > CONFIG_INFINIBAND_QLGC_VNIC_STATS=y 2687a2705,2706 > CONFIG_EDAC_I3000=m > CONFIG_EDAC_I5000=m 2819a2839 > CONFIG_ECRYPT_FS=m 2978a2999 > # CONFIG_LOCK_STAT is not set 3029a3051,3057 > CONFIG_CRYPTO_API=m > CONFIG_CRYPTO_ALGAPI=m > CONFIG_CRYPTO_AEAD=m > CONFIG_CRYPTO_BLKCIPHER=m > CONFIG_CRYPTO_SEQIV=m > CONFIG_CRYPTO_HASH=m > CONFIG_CRYPTO_MANAGER=m 3030a3059,3060 > CONFIG_CRYPTO_NHMAC=m > CONFIG_CRYPTO_XCBC=m 3038a3069,3072 > CONFIG_CRYPTO_ECB=m > CONFIG_CRYPTO_CBC=m > CONFIG_CRYPTO_CTR=m > CONFIG_CRYPTO_CCM=m 3054a3089 > CONFIG_CRYPTO_AUTHENC=m ---------- Forwarded message ---------- From: Eduardo Grosclaude <eduardo.grosclaude(a)gmail.com> Date: Tue, Sep 23, 2008 at 9:41 PM Subject: ASUS P5GC-MX/1333+ WD SATA To: CentOS mailing list <centos(a)centos.org> Hi, I'm puzzled by an ASUS P5GC-MX/1333 with a WD320AAJS disk. My 5.2 DVD refused to see the hard disk. As the CD happened to have a bad MD5 sum, I assumed this was due to a bad burnt image. Backed off to 5.1. Installation of 5.1 to /dev/sda went OK, then I upgraded by yum to 5.2. But, at the next boot, the new kernel can't see the disk. Only when BIOS IDE Setup is "compatible" I can boot the new kernel. However, the disk shows up as /dev/hdc and performance is noticeably slow. If I choose any other mode, nash complains that any LVM groups can't be found and panics away. I/O in general is terrible. Copying a CDROM to a file with dd renders the machine nearly unusable. The kernel provided in 5.1 can work in the BIOS IDE Setup "enhanced/SATA" and performance is really good. Hdparm when under the current kernel says 3.51 MB/s buffered speed, whereas for the older kernel it claims some 111+ MB/s. I have updated the BIOS ROM to no avail. What am I missing? Is there anything I can do except keep trying kernel updates? TIA -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina

1 0

sudo
by centos＠unixplanet.biz 10 Oct '08

10 Oct '08

Hi Biz_User needs to switch to Sales_User, and I tried following in sudoers: Biz_User ALL=(Sales_User) ALL but I get following error when I run sudo su - Sales_User "Sorry, user Biz_User is not allowed to execute '/usr/bin/su - Sales_User' as root on Server_Name" I know that if I add root in allowed users list, I can switch to other user , but in that way user can switch to root as well. %Biz_Users ALL=(Sales_User,root) ALL any better idea ?

3 2

Xboard rpm for CentOS 4
by vandaman2002-rt＠yahoo.co.uk 10 Oct '08

10 Oct '08

Has anyone built an rpm for xboard for CentOS 4? I looked in the EPEL repo, KBS repo and rpmforge but none exist. The KBS repo has gnuchess in testing but what good is gnuchess without xboard? As usual the fedora SRPM for Fedora 6 and Fedora 9 cannot build on CentOS 4- they might build on CentOS 6 but i have no time machine :).

9 18

Installing a new VM on a xen box.
by James B. Byrne 10 Oct '08

10 Oct '08

HW = HPQ DC7700 DuoCore 1.8GHz, 4 x 2GB RAM, 1 x 1TB SATA (AHCI) OS = CentOS-5.2 ix_64 (xen) I am experimenting with Xen and with virtual machines in general for the first time. In consequence I have many questions. However, the one that I wish answered at the moment is simple: Given a DVD containing the CentOS-5.2_Final (i386) distribution mounted at /media/CentOS_5.2_Final on Dom0, what argument do I pass to the "Install Media URL" argument of the "Create a new virtual system" wizard" to install the 32 bit version of CentOS-5.2 onto a vm called test-1? I have tried things like: /media/CentOS_5.2_Final /media/CentOS_5.2_Final/images /media/CentOS_5.2_Final/images/diskboot.img etc. All attempts produce the same negative result. What URL is used to load the 32 bit OS from the dvd? I am a digest subscriber so the favour of a direct copy of any reply to the list is appreciated. Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

6 15

Video driver questions
by Robert Moskowitz 10 Oct '08

10 Oct '08

My OQO has a VIA chipset. From the hwconf: class: VIDEO bus: PCI detached: 0 desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics" vendorId: 1106 deviceId: 3157 subVendorId: 1106 subDeviceId: 3157 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 When I install Centos, I default to the vesa driver, and it operates at the monitor's native 800x480. Of course I want more and to physically scroll the screen to see all of the content (the OQO has slide bars on it that do cause the current active window to scroll). When I change the monitor settings to Generic LCD 1024x768, I get that and 800x600 as an option. If I change the screen resolution to either 800x600 or 1024x768, and log out of X and log back in, my resolution is unchanged at 800x480. So I tried using the VIA driver that comes with Centos. It does not list the CX700, but, you know, give it a try. At first I get errors from X when logging in, finally I get changes to occur, but I am still at 800x480. Selecting 800x600 or 1024x768 mkaes no difference. Below is my /etc/X11/xorg.conf. Any ideas on what to try? # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1024x768" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 31.5 - 48.0 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

6 15

More Samba Questions
by Joseph L. Casale 10 Oct '08

10 Oct '08

I have never setup a Samba server, and the recent thread here prompted to get on this I need to migrate two XP machines from using iSCSI to Samba. I thought the "+" preceding a username in the smb.conf file for a share definition told Samba to use the unix username? Unless I actually use swat to create and enable the user and take off the + it doesn't work. Any ideas what swat does when you create a user through that interface? Is there any way to simply force Samba to use locally created users in the share definition? Thanks! jlc

4 7

CentOS-announce Digest, Vol 44, Issue 8
by centos-announce-request＠centos.org 10 Oct '08

10 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0937 Important CentOS 3 i386 cups - security update (Tru Huynh) 2. CESA-2008:0937 Important CentOS 3 x86_64 cups - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 10 Oct 2008 10:49:24 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2008:0937 Important CentOS 3 i386 cups - security update To: centos-announce(a)centos.org Message-ID: <20081010084924.GB18421(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2008:0937 cups security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0937.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/cups-1.1.17-13.3.54.i386.rpm updates/i386/RPMS/cups-devel-1.1.17-13.3.54.i386.rpm updates/i386/RPMS/cups-libs-1.1.17-13.3.54.i386.rpm source: updates/SRPMS/cups-1.1.17-13.3.54.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update cups Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

Firefox3 for CentOS4 -- dependency on evolution28 packages?
by Bart Schaefer 10 Oct '08

10 Oct '08

I'd been putting off installing the FX3 packages because of some extensions I use that don't have upgrades. [*] However, when FX1.5 crashed on me today I decided to finally go ahead. Fired up yum and I'm told I have to install a slew of evolution28 library packages in order to install the firefox package. Why? I removed evolution from my system for a reason, and I'd just as soon it stays gone. [*] Additional off-topic rant: Why was the API access to form history removed from Firefox? Why must I throw away my entire history to get rid of a few typographical errors to reduce the number of bogus field completion choices I'm offered?

5 5

Thunderbird does not follow url links in Firefox
by Theo Band 10 Oct '08

10 Oct '08

Since the recent update from firefox2 to firefox3 the links in my mails do no longer work. No window pops up. After some debug I found the problem. Let's share it with others that experience the same problem: I'm using Thunderbird 2.0.0.17 (manually downloaded, that might have caused the problem, I have not tried with 1.5) I'm using Firefox 3.0.2 (yum installed CentOS 4.7) To solve I created a small wrapper script that unsets LD_LIBRARY_PATH: cat <path>/firefox_wrap #!/bin/bash unset LD_LIBRARY_PATH firefox $@ To start add : user_pref("network.protocol-handler.app.http", "<path>/firefox_wrap"); to ~/.thunderbird/<salt>/prefs.js (or use the advanced config editor) The error message (for those Googling around): /usr/lib/firefox-3.0.2/firefox-bin: /opt/thunderbird-2.0.0.17/libnss3.so: version `NSS_3.12' not found (requiredby /usr/lib/firefox-3.0.2/libxul.so) Cheers, Theo

3 2

find
by tony.chamberlain＠lemko.com 10 Oct '08

10 Oct '08

I am looking for something similar to the windows SEARCH FILES comman with the option "files containing ..." (that is where I can specify a string and it will find all files containing that string -- not just having the string as part of the name but actually containing it in the text). Is there some way to do this?

11 16

[Fwd: Re: [CentOS] Install CentOS-5.0 on HP-ComPaq DC7700 Dual Core]
by James B. Byrne 10 Oct '08

10 Oct '08

---------------------------- Original Message ---------------------------- Subject: Re: [CentOS] Install CentOS-5.0 on HP-ComPaq DC7700 Dual Core From: "James B. Byrne" <byrnejb(a)harte-lyne.ca> Date: Mon, October 6, 2008 12:26 To: cenos(a)centos.org Cc: "John Newbigin" <jnewbigin(a)ict.swin.edu.au> -------------------------------------------------------------------------- On Sun, October 5, 2008 20:39, John Newbigin wrote: > Also make sure you have the latest firmware and set the hard disk mode > in the BIOS to Raid (Which will enable AHCI). > > John. By the time I received this message I had already installed the ia_64 version of CentOS-5.2 with the BIOS set to IDE emulation. If now I change the BIOS to use RAID then the system cannot see the SATA drive at all. Is it possible to change the BIOS setting to RAID and subsequently load the necessary drivers from the boot DVD without having to reinstall the entire system? If so, then what is the procedure? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 4

Samba 3.0.28/3.0.32
by Spike Turner 10 Oct '08

10 Oct '08

I've looked at the CentOS docs-list as well as the Wiki as I was interested in Samba. On one CentOS box I've got 3.0.32 (the latest bug-fixed version from Samba.org) and on another I've got 3.0.28 (the latest from upstream). The docs look almost the same and the docs refer to security = share. However 3.0.32 comes with a blank smb.conf making it harder to get a secure server up and running. Is there a plan for a quick and dirty guide on the Wiki for setting up Samba with secure settings as well as TDB rather than deprecated settings? In tips and tricks there is http://wiki.centos.org/TipsAndTricks/WindowsShares Without writing a book as someone suggested, a few one-liners could be put together in the wiki. Spike

10 15

rpmforge, perl-dbd-mysql, yum, priorities, centos, and you
by Joe Pruett 09 Oct '08

09 Oct '08

rpmforge has just released a new perl-DBD-mysql for el4 that has an obsoletes against perl-DBD-MySQL and the protectbase yum plugin doesn't grok obsoletes. the priorities plugin does. so if you are having issues with this, install the yum-plugin-priorities first, make sure that the CentOS-Base repo is priority 1 and the rpmforge repo is priority 2 or higher (99 is the default). also, i'd like to suggest that the priorities plugin be made added to the base install and that the centos-base repos be configured with priority 1. it looks like c4 has the priority setting, but c5 doesn't and neither have the plugin installed. it seems like this would create a little more stable setup for people when they start adding other repos.

3 4

Apache Charset vs html file charset
by Spike Turner 09 Oct '08

09 Oct '08

The apache httpd.conf has AddDefaultCharset UTF-8 while the page I'm viewing on my CentOS server is charset=ISO-8859-1 The page appears funny on the browser showing �� Given that apache has the default charset shouldn't it honor it? Why the �� characters? Spike.

3 5

CentOS-announce Digest, Vol 44, Issue 7
by centos-announce-request＠centos.org 09 Oct '08

09 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0941-04: Low CentOS 2 i386 tzdata enhancement update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 09 Oct 2008 12:40:17 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2008:0941-04: Low CentOS 2 i386 tzdata enhancement update To: centos-announce(a)centos.org Message-ID: <48ED6101.7040103(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHEA-2008:0941-04 tzdata enhancement update Files available: tzdata-2008f-1.el2_1.noarch.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 44, Issue 7 **********************************************

1 0

How to upgrade GNOME in CentOS?
by Sadaruwan Samaraweera 09 Oct '08

09 Oct '08

Hi, I need to know is there a way to upgrade the current version of GNOME to the newest version ? -- Sadaruwan Samaraweera

8 9

find cont'd 3
by tony.chamberlain＠lemko.com 09 Oct '08

09 Oct '08

Another question about find. I looked at the gnome tool and tried to simulate what it is doing. I can't use it directly because it won't do sed. Basically I want to find all files with a string (except binary) and change it. let STR be the string I am looking for. NEW is new string. I am doing TFIL=/usr/tmp/dummy$$.txt find . -type f | while read fil do grep "$STR" $fil > $TFIL [ $? -eq 0 ] || continue ## does not match if [ "$(cat $TFIL)" = "Binary file $fil matches" ] then continue # Don't operate on binary files fi sed -i "s/$STR/$NEW/g" $fil done (I will have to do something with sed in case there is "/" in the string) Problem is, the grep redefines my stdin so it no longer comes from the list of files that "find" found, and it then terminates after finding the first file. Anyway to "push" stdin on the stack or something before the grep, and "pop" it again afterwards, so it goes back to the list of files found?

1 0

Request for additional patch in CentOS Plus kernel
by Filipe Brandenburger 08 Oct '08

08 Oct '08

Hi, I have an Adaptec eSATA card, model 1225SA: http://www.adaptec.com/en-US/products/Controllers/Hardware/sata/entry/AAR-1… Although the chipset is sata_sil24, it is not recognized by default by the kernel because its PCI ID is different than the ones recognized by this driver on the CentOS kernel. The driver recognizes PCI IDs such as 0x3132, 0x0242, 0x3131, but not 0x0244, which is the one this card has. I found out that it works with the latest kernel, and that the patch to make it work only adds the 0x0244 PCI ID to the list of IDs recognized by the sata_sil24 driver. Here is the patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdi… Following the instructions on the Wiki, I built a custom kernel based on the CentOS Plus kernel, but adding this patch. The adapter worked as expected with that kernel. So I ask: Would it be possible to incorporate this patch to the default set of patches applied on the CentOS Plus kernel? I would really appreciate it since that would make it easier for me to keep updated without worrying about the card. Thanks a lot! Filipe

5 7

Question on Wireless Setup
by Ashish Vijaywargiya 08 Oct '08

08 Oct '08

Hello Akemi & Others, Today I reformated my laptop Dell Precision M90 and installed the Fresh version of CentOs 5.2 and then took all the available update. In that update I got Kernel version update and now I am on Kernel-2.6.18-92.1.10.el5.centos.plus. I kept a file iwlwifi-3945-1.ucode into the /lib/firmware/ Now after restarting the computer my computer it is giving the following message on the startup. Bringing up interface wmaster : Determining IP information for wmaster .... SIOCSIFLAGS : Operation not supported. In the network manager it is showing my device i.e Intel Pro 3945 adapter but in the Inactive state. Please give me some suggestion so that I can figure out this problem. Thanks in advance. -- Ashish Vijaywargiya Indore (M.P), India http://en.wikipedia.org/wiki/Indore

5 7

Slightly OT: Dell Poweredge 2850 with 4GB RAM
by Sorin＠Gmail 08 Oct '08

08 Oct '08

Hi all, I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e raid controller. Installation went well and the raid is pretty fast even with level 5. However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling a bit, got me to install kernel-PAE, this went well, but CentOS still sees only 256MB. Googling some more, I found a bios update was suggested and might do the trick. Checking what bios version the server had, revealed it was A02. Upon checking the Dell support site I saw they had a version A07, which I downloaded. The file was in bin format and executable via the CLI. Installation of the A07-version went well too with no errors, and it told me to reboot the machine to activate/start the update. Upon reboot, at post, it said the update failed. Now what?? I'm at a loss here. This is my first Dell Poweredge-server and I lack knowledge in the tricks-department with this one. What do I do now? Knowing the Dell-support, I turn to this list in hope of some useful hints in this matter. Thx for any insights. -- Best Wishes Sorin --------------------------------------------- http://home-skynet.servehttp.com/ Proud member of TEAM OS/2. Mountainbiker [Kona Kilauea - Member of Equipe Les Cafards VTT] Motorcyclist [Honda VFR750F-'97] MCSE, MCP+I, MCP, A+ [Knowledge is power!] --------------------------------------------- () ascii ribbon campaign - against html e-mail /\ MotD: This is an adware tagline. Please visit our sponsors to continue helping the development of this tagline.

10 26

CentOS-announce Digest, Vol 44, Issue 6
by centos-announce-request＠centos.org 08 Oct '08

08 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2008:0925 CentOS 4 x86_64 openmpi Update (Johnny Hughes) 2. CEBA-2008:0925 CentOS 4 i386 openmpi Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 08 Oct 2008 06:01:19 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2008:0925 CentOS 4 x86_64 openmpi Update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <48EC92FF.8050000(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Bugfix Advisory 2008:0925 Upstream details at : https://rhn.redhat.com/errata/RHBA-2008-0925.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: openmpi11-1.1.5-1.el4_7.i386.rpm openmpi11-1.1.5-1.el4_7.x86_64.rpm openmpi-1.2.7-2.el4_7.i386.rpm openmpi-1.2.7-2.el4_7.x86_64.rpm openmpi-devel-1.2.7-2.el4_7.i386.rpm openmpi-devel-1.2.7-2.el4_7.x86_64.rpm openmpi-libs-1.2.7-2.el4_7.i386.rpm openmpi-libs-1.2.7-2.el4_7.x86_64.rpm src: openmpi11-1.1.5-1.el4_7.src.rpm openmpi-1.2.7-2.el4_7.src.rpm

1 0

Samba 3.0.28/3.0.32
by Spike Turner 08 Oct '08

08 Oct '08

I've looked at the CentOS docs-list as well as the Wiki as I was interested in Samba. On one CentOS box I've got 3.0.32 (the latest bug-fixed version from Samba.org) and on another I've got 3.0.28 (the latest from upstream). The docs look almost the same and the docs refer to security = share. However 3.0.32 comes with a blank smb.conf making it harder to get a secure server up and running. Is there a plan for a quick and dirty guide on the Wiki for setting up Samba with secure settings as well as TDB rather than deprecated settings? In tips and tricks there is http://wiki.centos.org/TipsAndTricks/WindowsShares Without writing a book as someone suggested, a few one-liners could be put together in the wiki. Spike

2 1

AW: Re: [CentOS] ssh error in /var/log/secure
by Marc Rebischke 08 Oct '08

08 Oct '08

>Akemi Yagi wrote: >> >> This has to do with ipv6. >Thanks! >Got it fixed. Hi, Maybe (?) it would be helpful for us all if You would tell us how the Problem was Fixed instead of telling us "Thanks, got it fixed" ;-) P.S. Sorry for the horrible Format of this Mail. But i'm using the lausy M$-Standard-Client on my Mobile-Phone... Regards Marc Rebischke

3 2

How to unsubscribe
by Joey Mendez 08 Oct '08

08 Oct '08

I appreciate all the help I received from this Mailing List. However I am receiving work email to my cell phone now and I am being overwhelmed with the mailing list emails. Can some one let me know how to unsubscribe from this mailing list. Thank you -- Jose Mendez Computer Resource Specialist HNRC 619-543-8090

7 6

Software Raid Expert Needed
by Iulian Badea 08 Oct '08

08 Oct '08

Hello all, I have 2 x 250GB sata disks (sda and sdb). # fdisk -l /dev/sda Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 14939 119997486 fd Linux raid autodetect /dev/sda2 14940 29878 119997517+ fd Linux raid autodetect /dev/sda3 29879 30400 4192965 fd Linux raid autodetect # fdisk -l /dev/sdb Disk /dev/sdb: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 522 4192933+ fd Linux raid autodetect # cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb1[1] sda3[0] 4192832 blocks [2/2] [UU] md1 : active raid1 sda2[1] sda1[0] 119997376 blocks [2/2] [UU] What I want to do: - have on each disk 2 partitions (4gb for swap and the 200gb+ the rest for /) - raid 1 between them This is what I wanted in the beginning, but...I didn't paid attention... What can I do to rebuild it to my needs (without loosing data or reformatting)? Thanks

5 7

Discussion: automount problem in 5.2
by kapil singh 07 Oct '08

07 Oct '08

Hello all, Automount is not working well with centos 5.2, but the same is working nicely with centos 5 . -- Thanks and Regards, Kapil Singh Kushwah Linux System/Network Administrator Hotwax Media Inc. Indore,(M.P) INDIA

6 6

Cebit and Centos
by Didi 07 Oct '08

07 Oct '08

Hey I just read this http://www.linux-magazine.com/online/news/cebit_open_source_linux_magazine_… Maybe Centos want's to try to get a stand. Cheers Didi ---- www.ribalba.de Email / Jabber: ribalba(a)gmail.com Skype : ribalba

6 8

Customizing SELinux Policy
by Alain Reguera Delgado 07 Oct '08

07 Oct '08

Hi Guys, After some moths the server has been running in SELinux Permesive mode ... Some avc: denied messages has been recored ... I thought it was time to go to the next step and set SELinux Enforcing mode in the server ... it is a mail(postfix+cyrus+sasl), web, snmp with mrtg, squid sever with a local TLS configured for webmail access ... I took a look to the Deployment Guide about how to do it ... and tried to build modules with audit2allow from the /var/log/message The modules seem to work fine, because old avc denied messages desappeard ... but some messages like the following appear at /var/log/messages when I do a semodule -i modulename or semodule -r modulename : Oct 5 20:16:11 orion kernel: : exe="?" (sauid=81, hostname=?, addr=?, terminal=?)' Oct 5 20:16:11 orion kernel: audit(1223252171.572:8): policy loaded auid=4294967295 ses=4294967295 Oct 5 20:16:41 orion kernel: audit(1223252201.673:9): user pid=2172 uid=81 auid=4294967295 subj=system_u:system_r:system_dbus d_t:s0 msg='avc: received policyload notice (seqno=3) Oct 5 20:16:41 orion kernel: : exe="?" (sauid=81, hostname=?, addr=?, terminal=?)' Oct 5 20:16:41 orion kernel: audit(1223252201.676:10): policy loaded auid=4294967295 ses=4294967295 Oct 5 20:17:51 orion kernel: audit(1223252271.462:11): user pid=2172 uid=81 auid=4294967295 subj=system_u:system_r:system_dbu sd_t:s0 msg='avc: received policyload notice (seqno=4) Oct 5 20:17:51 orion kernel: : exe="?" (sauid=81, hostname=?, addr=?, terminal=?)' Oct 5 20:17:51 orion kernel: audit(1223252271.464:12): policy loaded auid=4294967295 ses=4294967295 Oct 5 20:19:06 orion kernel: audit(1223252346.208:13): user pid=2172 uid=81 auid=4294967295 subj=system_u:system_r:system_dbu sd_t:s0 msg='avc: received policyload notice (seqno=5) Oct 5 20:19:06 orion kernel: : exe="?" (sauid=81, hostname=?, addr=?, terminal=?)' Oct 5 20:19:06 orion kernel: audit(1223252346.211:14): policy loaded auid=4294967295 ses=4294967295 Oct 5 20:19:11 orion kernel: audit(1223252351.331:15): user pid=2172 uid=81 auid=4294967295 subj=system_u:system_r:system_dbu sd_t:s0 msg='avc: received policyload notice (seqno=6) Also, in the /var/log/httpd/ssl_error_log the following messages appear too: [Sun Oct 05 19:58:19 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Sun Oct 05 19:58:19 2008] [warn] RSA server certificate CommonName (CN) `orion.ciget.cienfuegos.cu' does NOT match server nam e!? Really rare to me because that name `orion.ciget.cienfuegos.cu' is the actual server hostname. When try to connect to the webmail through https:// can't connect to it, the browser reports connection failed after a waiting of a few seconds. http:// works as expected. This machine is fully updated in CentOS-5.2. Linux orion.ciget.cienfuegos.cu 2.6.18-92.1.13.el5 #1 SMP Wed Sep 24 19:33:52 EDT 2008 i686 i686 i386 GNU/Linux Could you suggest something ? ... Thank you very much guys, al.

1 1

CentOS-announce Digest, Vol 44, Issue 5
by centos-announce-request＠centos.org 07 Oct '08

07 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0908 Moderate CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 6 Oct 2008 18:44:07 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0908 Moderate CentOS 4 s390(x) thunderbird - security update To: centos-announce(a)centos.org Message-ID: <20081006154407.GD5793(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0908 https://rhn.redhat.com/errata/RHSA-2008-0908.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/thunderbird-1.5.0.12-16.el4.centos.s390.rpm s390x: updates/s390x/RPMS/thunderbird-1.5.0.12-16.el4.centos.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

problem talking to server postgrey/socket: Permission denied
by Dirk H. Schulz 07 Oct '08

07 Oct '08

Hi folks, I have installed postgrey from the rpmforge repo, but it does not work well with postfix from CentOS 5.2: I always get the error: warning: connect to postgrey/socket: Permission denied problem talking to server postgrey/socket: Permission denied But the permissions on the socket seem okay (postfix could write to it): srw-rw-rw- 1 postgrey postgrey 0 4. Okt 14:48 socket I also tried "restorecon -R /var/spool/postfix/postgrey", but that did not change anything, either. Googling does not show anything recent and helpful. Any hint or help is appreciated. Dirk

3 4

vsftpd
by Mad Unix 07 Oct '08

07 Oct '08

Hi ALL I'm using vsftpd as FTP server, and I'd like to chroot my FTP users to their home dir. How can I do it? i.e. "jailing" them in their home dir... at the moment I have the following issues the user when they login to ftp server they go to the main directory /var/ftp/ /etc/passwd ... sdc:x:501:501::/var/ftp/sdc:/bin/bash ase:x:502:501::/var/ftp/ase:/bin/bash jsc:x:503:501::/var/ftp/jsc/:/bin/bash [root@linux10 ftp]# pwd /var/ftp [root@linux10 ftp]# ls -al total 28 drwx--x--x 6 root ftpusers 4096 Oct 6 13:46 . drwxr-xr-x 22 root root 4096 Oct 5 15:42 .. drwx------ 3 ase ftpusers 4096 Oct 6 20:30 ase drwx------ 3 jsc ftpusers 4096 Oct 6 17:27 jsc drwx------ 2 pons pons 4096 Oct 6 16:22 pub drwx------ 5 sdc ftpusers 4096 Oct 6 17:19 sdc chroot_list_enable=YES # (default follows) chroot_list_file=/etc/vsftpd/chroot_list chroot_local_user=YES # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES ###added for TLSand SSL permission ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES rsa_cert_file=/etc/vsftpd/vsftpd.pem rsa_private_key_file=/etc/vsftpd/vsftpd.pem local_root=/var/ftp #userlist_file=/etc/vsftpd/ftpusers userlist_file=/etc/vsftpd/ftpusers #userlist_file=/etc/vsftpd/user_list pasv_enable=YES anon_max_rate=10485760 local_max_rate=0 max_clients=500 max_per_ip=4 passwd_chroot_enable=YES

1 0

Re: [CentOS] Re: mysqld breaks yum, help?
by Vandaman 07 Oct '08

07 Oct '08

Dac Chartrand wrote: > Yum is broken. > I have the priorities plug-in setup. I did `yum update` before > messing around with 3rd party repositories. The only modules I > installed from the 3rd party sties are PHP related. Isn't there php in the CentOS plus repo? What repo is that you messed about with? ATRPMS or Livna? Regards, Vandaman.

11 29

Eclipse 3.2.1-19 package on Centos 5.2
by Tom [toms400] 07 Oct '08

07 Oct '08

Hi, I'm using Centos 5.2 and trying to use Eclipse's embedded browser without success. Could this be due to any of the patches that were commented out in 3.2.1-18? When trying to use the embedded browser, I get the error: No more handles (java.lang.UnsatisfiedLinkError: no swt-mozilla-gtk-3235 in java.library.path). I have a gre.conf, have set MOZILLA_FIVE_HOME, and LD_LIBRARY_PATH, but continue to get that error. If you have any ideas, I'd be very grateful. Thanks -Tom

2 1

Re: OT: RIP settings for private netblocks
by James B. Byrne 06 Oct '08

06 Oct '08

James B. Byrne wrote: > You can accomplish this much easier by simply using > a firewall. I like OpenBSD firewalls in layer 2 > bridging mode. Put the firewall in-line between the > router and the rest of the network, no other network > changes needed. The difficulty with this is that it requires yet another host, a reconfiguration of the existing wiring plan, and dealing with a number of other issues which directly arise from the first two requirements. We already use IPtables, and we already have some of our older hosts secured behind sshd linux boxes so that network traffic to them is only carried en clair across direct x-wired patch cables. > If your not well versed in routing I wouldn't recommend > going around making a bunch of changes to a system that > I assume has been more or less working for more than > a decade. Which is why I asked the question if by making a single change to the network parameter of the Cisco Router could I avoid: 1. Physically segmenting my LAN 2. Having to commission an additional host or reconfigure an existing host to multi-homed. Routing is something I do not go at very often and I do not trust my memory for such things in consequence. The manuals and books that I have give sketchy coverage of this aspect and use examples much more narrow in scope than I contemplate. It would be a gross over-statement to say that I am unfamiliar with the concepts of routing. But I am asking for specific guidance on specific software (CISCO ISO 12.x) and hardware (CISCO 26xx series) from someone with experience in these matters. I recognize that this is not the precise forum to ask, thus the OT. On the other hand, I trust that my situation cannot be very dissimilar to those faced previously by many system administrators who also happen to run CentOS. Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

OT: RIP settings for private netblocks
by James B. Byrne 06 Oct '08

06 Oct '08

I am contemplating converting some of our internal networks from routable to private IPv4 address space. I have a question about RIP as implemented under Cisco IOS 12.x. Presently the setting for rip is: router rip version 2 passive-interface [[FastEthernet]]0/0 network aaa.bbb.ccc.0 no auto-summary What I would like to know is how one routes the entire 192.168/16 address space using rip. My perusal of the various Cisco manuals, technical documents and various O'Rielly books is not giving me any clear answer and I am rather reluctant to experiment on our live Internet connection. Will this do what I imagine it might, treat any address 192.168.x.y or 10.x.y.z as an internal network? router rip version 2 passive-interface [[FastEthernet]]0/0 network aaa.bbb.ccc.0 network 192.168.0.0 network 10.0.0.0 no auto-summary Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 4

need ur kind advice
by fabian dacunha 06 Oct '08

06 Oct '08

Dear All, apprecite ur kind help n advice I have a Centos 5 server running only squid for sometime and its workin great. i am concerned about security so i have a shorewall firewall on the machine runnign squid n works grt now i would like to know the follwing 1) does anyone one know of any good antivirus software i could install on the centos OS squid server so as to scan for viruses so i cd periodically scan the server thnks and apprecite regards fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 3

ejabberd 2.0.2 vs SELinux vs CentOS 5
by Damian S 06 Oct '08

06 Oct '08

Lordy, I've been having problems with this darn thing, so I hope someone can help me. :s My troubles started when I downloaded the latest erlang and ejabberd packages. I crashed and burned very quickly, trying two or three different versions of erlang along with several of ejabberd 2.0.x. Finally, after a week of pain, I admitted defeat, wiped the whole lot and installed the binary on the process-one website. Initially, the binary worked well, but mysteriously stopped working whenever I changed the config file and restarted the file. Anyway, to cut a long story short, I have discovered that SELinux is preventing erlang from accessing its crypto libs. This message appears in the SELinux audit logs: type=AVC msg=audit(1223133076.770:102): avc: denied { execmod } for pid=3878 comm="beam.smp" path="/opt/ejabberd-2.0.2_2/lib/crypto-1.5.2/priv/linux-x86/lib/crypto_drv.so" dev=dm-0 ino=26738869 scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:object_r:usr_t:s0 tclass=file What do I need to do, for selinux to allow this? (Or should I take this question to an SELinux list?) FWIW, ejabberd seems to run fine while selinux is enabled. Its just when starting up, that it needs selinux to stay out of the way.

5 8

find - text
by tony.chamberlain＠lemko.com 06 Oct '08

06 Oct '08

A while ago I sent mail about wanting to find all files that had a certain text string in it and changing it to something else. People mentioned that there is a system tool to do it (gnome has it too). I ran this, for example to find all files WITH "prog" in the name, and then I did a ps and I saw simply find . -iname '*prog*' then I did something similar, all file names but with "prog" in it, and found basically two lines (one was child process of the other, so I assume it was a pipe or something): find . -type f grep -i -c prog this does a grep for case insensitivity for "prog", so basically the tool uses find and grep. I could do something like find . -type f | while read fil do sed -i 's/prog/name/g' $f # change "prog" to "name" done A couple problems here. If what I am changing is the same length then it may be ok. But consider this quick (example) C program state.c int main( int argc, char **argv ) { printf( "Ohio\n" ); } if I compile it to "state" and then print it prints Ohio. If I do (on the compiled file state) sed -i 's/Ohio/Utah/' state then it will print Utah. However, if I change the length sed -i 's/Ohio/Michigan/' state it will of course SIGSEGV because it changed some of the object code. (Actually even doing the same length can be dangerous). What I want to do is either provide another option to the find (which I can'e seem to find), or pipe the files it finds to something like "file" to get only ASCII files (non-object code). However, I am not sure how to do this. On most files, the "file" command will return something with "text" in it, but not all files. For instance, sometimes it returns "application" or "shell script" but it is still OK to do the sed on these. Is there some easy way to take a file name and determine whether sed -i can safely be done on it (i.e., it is ASCII and not some sort of binary file)? Tony

2 1

Boot disk order: h/w vs. grub
by MHR 06 Oct '08

06 Oct '08

I'm still having conceptual trouble with this one. I have two PATA and two SATA disks in my home system. When the system comes up, these are, espectively, /dev/hda, /dev/hdb, /dev/sda and /dev/sdb. I have the boot order of the drives in the boot PROM set to boot from /dev/sda (hard drive 2), then /dev/hda (hd 0), and usually that works fine. /dev/sda is properly set up with the MBR and /boot lives there as well. However, when the system has to be shut down, usually for some length of time more than just a few seconds, when it comes back up, it can't find the boot image. I forgot how I got around this the first time. The second time, when it wasn't booting past the "GRUB" part of the grub announcement, I used the installation disk, booted into linux resuce mode, chroot'd to the actual system disk and re-did grub-install. Still, a few days later (last Tuesday) when my video card went south, I just edited the grub boot line to use root(hd2, 0) and it came up, followed by several reboots with unmodified grub config lines. I guess I'm wondering if there's some more permanent way around this issue. Do I need to overwrite the MBR on hd0? Should I reconfigure the system so the PATA drives are not connected to the m/b at all (i.e., usb enclosures)? Is this a bug in grub? All this is assuming that I do not get rid of the PATA drives and/or get a new m/b that has <something else>.... It seems strange that this should be such a pain, even though in a rather oddball way it makes sense. Thoughts? Thanks mhr

2 2

mysqld breaks yum, help?
by Dac Chartrand 06 Oct '08

06 Oct '08

Greetings. After doing: $ yum install mysql-server $ /etc/init.d/mysqld start Yum is broken. Example: $ yum list php Loading "fastestmirror" plugin Loading "priorities" plugin Loading mirror speeds from cached hostfile * utterramblings: www.jasonlitka.com * base: mirror.nuvio.com Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.main(sys.argv[1:]) [..snip..] File "/usr/lib/python2.4/threading.py", line 416, in start _start_new_thread(self.__bootstrap, ()) thread.error: can't start new thread I have the priorities plug-in setup. I did `yum update` before messing around with 3rd party repositories. The only modules I installed from the 3rd party sties are PHP related. More importantly, if I do `/etc/init.d/mysqld stop`, yum works fine. So it's only failing when mysqld is turned on. Can someone offer some insight here? Thank you for your time. $ cat /etc/redhat-release CentOS release 5.2 (Final) --- http://www.sux0r.org/

3 3

CentOS-announce Digest, Vol 44, Issue 4
by centos-announce-request＠centos.org 06 Oct '08

06 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0892 Important CentOS 5 i386 xen Update (Karanbir Singh) 2. CESA-2008:0892 Important CentOS 5 x86_64 xen Update (Karanbir Singh) 3. CEBA-2008:0647 CentOS 5 i386 dhcpv6 Update (Karanbir Singh) 4. CEBA-2008:0647 CentOS 5 x86_64 dhcpv6 Update (Karanbir Singh) 5. CEBA-2008:0902 CentOS 5 i386 krb5 Update (Karanbir Singh) 6. CEBA-2008:0902 CentOS 5 x86_64 krb5 Update (Karanbir Singh) 7. CESA-2008:0907 Moderate CentOS 5 i386 pam_krb5 Update (Karanbir Singh) 8. CESA-2008:0907 Moderate CentOS 5 x86_64 pam_krb5 Update (Karanbir Singh) 9. CESA-2008:0908 Moderate CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sun, 5 Oct 2008 18:02:53 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0892 Important CentOS 5 i386 xen Update To: centos-announce(a)centos.org Message-ID: <20081005170253.GA16525(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0892 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: d169c9920b4a95dd2052558b63719cf3 xen-3.0.3-64.el5_2.3.i386.rpm 3a8a43ff61763d423ffea4e61b369ae2 xen-devel-3.0.3-64.el5_2.3.i386.rpm 7ef12e2caf4d4f356a4b81fa225b4602 xen-libs-3.0.3-64.el5_2.3.i386.rpm Source: 65c582ec1e3fe56880622ac80a1eeac5 xen-3.0.3-64.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Sun, 5 Oct 2008 18:02:53 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0892 Important CentOS 5 x86_64 xen Update To: centos-announce(a)centos.org Message-ID: <20081005170253.GA16538(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0892 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 24ed579ac38d5c85c7d5f9674f9e89ea xen-3.0.3-64.el5_2.3.x86_64.rpm 0707f323b0fae8afe97b0b6bb47df7ef xen-devel-3.0.3-64.el5_2.3.i386.rpm 28cbea36a4ae21aaefba858b5cc3115b xen-devel-3.0.3-64.el5_2.3.x86_64.rpm 23d85b35484ffe1b775489c62645c542 xen-libs-3.0.3-64.el5_2.3.i386.rpm 3b82e295e89db87b200ceb8e3867b771 xen-libs-3.0.3-64.el5_2.3.x86_64.rpm Source: 65c582ec1e3fe56880622ac80a1eeac5 xen-3.0.3-64.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Sun, 5 Oct 2008 18:20:45 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2008:0647 CentOS 5 i386 dhcpv6 Update To: centos-announce(a)centos.org Message-ID: <20081005172045.GA17033(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2008:0647 Upstream details at : https://rhn.redhat.com/errata/RHBA-2008-0647.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 4619861c990a4ad322c44cd56baaf231 dhcpv6-1.0.10-4.el5_2.3.i386.rpm e8baa7e03eac23551d54b9e5277175d5 dhcpv6-client-1.0.10-4.el5_2.3.i386.rpm b023a3a062998ebcf008a4d886dfdf0a libdhcp6client-1.0.10-4.el5_2.3.i386.rpm 20ae74aca181ed31def66f04f3f375b5 libdhcp6client-devel-1.0.10-4.el5_2.3.i386.rpm Source: 9b095b1f0aa59fb29a429a10f3f8d281 dhcpv6-1.0.10-4.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Sun, 5 Oct 2008 18:20:45 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2008:0647 CentOS 5 x86_64 dhcpv6 Update To: centos-announce(a)centos.org Message-ID: <20081005172045.GA17050(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2008:0647 Upstream details at : https://rhn.redhat.com/errata/RHBA-2008-0647.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 3296f6a38a1a2801526f1ef8a912da9a dhcpv6-1.0.10-4.el5_2.3.x86_64.rpm e7d96a3d363c02a698544ab0186d721a dhcpv6-client-1.0.10-4.el5_2.3.x86_64.rpm 7cabeb87d1034b529630b4a01f247afa libdhcp6client-1.0.10-4.el5_2.3.i386.rpm 79037cb0d605d2cc8416fcf004254852 libdhcp6client-1.0.10-4.el5_2.3.x86_64.rpm a37d3e179268fd9e3bde32ed6dfad0f8 libdhcp6client-devel-1.0.10-4.el5_2.3.i386.rpm 74f451044d97963ee7c13b92f26d106a libdhcp6client-devel-1.0.10-4.el5_2.3.x86_64.rpm Source: 9b095b1f0aa59fb29a429a10f3f8d281 dhcpv6-1.0.10-4.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Sun, 5 Oct 2008 18:31:15 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2008:0902 CentOS 5 i386 krb5 Update To: centos-announce(a)centos.org Message-ID: <20081005173115.GA17436(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2008:0902 Upstream details at : https://rhn.redhat.com/errata/RHBA-2008-0902.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 40a782b218851801e9e3f8a470a3a212 krb5-devel-1.6.1-25.el5_2.1.i386.rpm 2f30b4e4a1d3d209dbd8cc8b7e6a43c7 krb5-libs-1.6.1-25.el5_2.1.i386.rpm 12d35a8d50ebab4269c3a0814fcb9833 krb5-server-1.6.1-25.el5_2.1.i386.rpm c0e17f1d0cc5a51b021cb74b912a3b80 krb5-workstation-1.6.1-25.el5_2.1.i386.rpm Source: e66ecf84ee115ddd6194f3dddc406d7e krb5-1.6.1-25.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Sun, 5 Oct 2008 18:31:15 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2008:0902 CentOS 5 x86_64 krb5 Update To: centos-announce(a)centos.org Message-ID: <20081005173115.GA17450(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2008:0902 Upstream details at : https://rhn.redhat.com/errata/RHBA-2008-0902.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: d638ce74d13fed0c7573ebf3b9357641 krb5-devel-1.6.1-25.el5_2.1.i386.rpm 0e9dd19226feb7d810aa11489dfa19e0 krb5-devel-1.6.1-25.el5_2.1.x86_64.rpm df8a3cd393c951569ddabb3851efbeb5 krb5-libs-1.6.1-25.el5_2.1.i386.rpm 2e0fa2db1a30bf51185cedf3e161bc9e krb5-libs-1.6.1-25.el5_2.1.x86_64.rpm 6fea4d6250d2d982b4caa359c26dc6e4 krb5-server-1.6.1-25.el5_2.1.x86_64.rpm 1eb6614591fd9eb6a6de800cdd0ff2bd krb5-workstation-1.6.1-25.el5_2.1.x86_64.rpm Source: e66ecf84ee115ddd6194f3dddc406d7e krb5-1.6.1-25.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Sun, 5 Oct 2008 18:32:46 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0907 Moderate CentOS 5 i386 pam_krb5 Update To: centos-announce(a)centos.org Message-ID: <20081005173246.GA17545(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0907 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0907.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: b6518eaabc4905e284333da0984de8a1 pam_krb5-2.2.14-1.el5_2.1.i386.rpm Source: 16d994e0703fd6e62b9984147c83d095 pam_krb5-2.2.14-1.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Sun, 5 Oct 2008 18:32:46 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0907 Moderate CentOS 5 x86_64 pam_krb5 Update To: centos-announce(a)centos.org Message-ID: <20081005173246.GA17558(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0907 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0907.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 170d6bff250c6421af85fe945afac813 pam_krb5-2.2.14-1.el5_2.1.i386.rpm 52cd3e3625edcd04e98bef7f50c4e19d pam_krb5-2.2.14-1.el5_2.1.x86_64.rpm Source: 16d994e0703fd6e62b9984147c83d095 pam_krb5-2.2.14-1.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Mon, 6 Oct 2008 10:02:10 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0908 Moderate CentOS 4 ia64 thunderbird - security update To: centos-announce(a)centos.org Message-ID: <20081006070210.GC5793(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0908 https://rhn.redhat.com/errata/RHSA-2008-0908.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/thunderbird-1.5.0.12-16.el4.centos.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Proposed New Mailing List
by Vandaman 06 Oct '08

06 Oct '08

Karanbir Singh wrote: > And yea, working on setting up a sort of list to handle > much of this semi OT traffic. More news on that around > Wed next week, dint ask about it now. Off course people are going to ask. In my opinion as long as a topic is marked OT, it is preferable to one not marked but one in which the OP has not even done basic research on his problem. One distro had a "brainflash" a number of years ago - create a list for expert users and one for newbies. It didn't take long for the newbies to realise that there was no one to help and so flooded the "expert list". This put off the "experts". On some mailing lists, long time users are put off by the flood of posts by newbies who don't even conform to the list guidelines. Some pay back by not replying to those in violation without as much as a hint. Would a new list really solve anything or would it close one door and open another? Regards, Vandaman.

12 18

OT Mailing List Spam
by vandaman2002-rt＠yahoo.co.uk 06 Oct '08

06 Oct '08

OT Mailing List Spam This might be slightly off-topic but as the source of spam is probably a spammer getting emails from this list, I reported him and his service provider should cut off his/her ugly head. I got an email of the classic 419 scam from a "El Amir Assadallah" <rdjir001(a)eircom.net>. This has just come if from the abuse department :- Dear Vandaman, Thank you for your recent email to Technical Support. We have contacted our customer and hope to have this issue resolved within 72 hours. If you receive any further mails of this nature after the 72 hour time period has elapsed, please forward the headers. Kind Regards, eircom net Residential Technical Support. So report the damn spammers and get them kicked off. Regards, Vandaman

11 14

Nightly yum update did an "upgrade"
by Griesbach, Lutz 06 Oct '08

06 Oct '08

Hy there, i have a centos (4.?) Box with nightly yum update enabled. Last night, it did an upgrade to 4.7 leading to several problem i.e. not respawning the dhcrelay, which is needed on this box. Can I control the update policy not to upgrade to new releases in the nightly updates? I would like do to nightly updates, but make release upgrades manual (I get a new kernel, so I have to reboot anyway). Is that possible? Regards, Lutz Griesbach IT Administrator tel +49.40.325587.701 fax +49.40.325587.999 lutz.griesbach(a)coremedia.com CoreMedia Ludwig-Erhard-Str. 18 20459 Hamburg, Germany www.coremedia.com CoreMedia AG Executive Board: Sören Stamer (CEO), Dr. Klemens Kleiminger (CFO) Supervisory Board: Prof. Dr. Florian Matthes (Chairman) Trade Register: Amtsgericht Hamburg, HR B 76277 -------------------------------------------------------

21 44

Help -- LVM snapshot full -- how do I recover?
by Liam Kirsher 05 Oct '08

05 Oct '08

Hi -- I forgot to remove an LVM snapshot after making a backup. Now neither the snapshot nor the original volume are available. How do I recover and get the original volume back online? Currently, the output of lvs looks like LV VG Attr LSize Origin Snap% Move Log Copy% ...... dom5_data VolGroup01 -wi-ao 10.00G domTemplate_data VolGroup01 -wi-a- 2.00G dom6_data VolGroup02 owi-i- 24.00G dom6_snap VolGroup02 swi-d- 1.00G dom6_data 100.00 Any help very much appreciated! Liam This is on a Dell 2950 with CentOS 5.0 running Xen -- Liam Kirsher PGP: http://liam.numenet.com/pgp/

2 1

Yumex-Error in loading repository data
by Josh Donovan 05 Oct '08

05 Oct '08

On a CentOS 4 desktop Yumex gives the error message "Error in loading repository data" but yum works fine from the cli. Could something have been broken in yumex? Putting yumex in debug mode does not give me clues as to the error message. Thanks, Josh

2 2

JFS in CentOS
by Hal Martin 04 Oct '08

04 Oct '08

Hello all, I'm relatively new to CentOS, but I've been using linux as my main operating system on both the desktop and server ends for the past 4 years. I currently have a PIII server with two 160GB IDE hard drives in it, in a virtual RAID 1 array. At the time of installation, the only FS choices for the largest partition, 120GB, were ext2 and ext3. I chose ext3, but now am wishing to reformat the partition as JFS to skip long file system check times. I've done Google searches regarding the topic, which lead me to added centos.plus to my repo list, and installed the only kernel I see as being available from CentOSPlus, and yet I still have no JFS modules loaded or anywhere in /lib/modules/. I installed JFSUtils from the CentOSPlus repo, but have no way to use the partition that has been created (by myself, using mkfs.jfs). Short of compiling a kernel with JFS support from the source package provided with CentOS, I don't know what to do. Has anyone else used JFS on CentOS 5.2 successfully? How did you do it? Thanks, Hal

2 1

Re: [CentOS] OT Mailing List Spam
by Glenn 04 Oct '08

04 Oct '08

At 01:47 AM 10/3/2008, you wrote: >On Thu, Oct 2, 2008 at 8:21 PM, Chris Boyd <cboyd(a)gizmopartners.com> wrote: > > > > On Oct 2, 2008, at 3:17 PM, Vandaman wrote: > > > >> 1. Go to the eircom page or type abuse at eircom in google to get the web > >> form. The form looks like it goes direct to their tech support, they > >> responded very fast. > > > > Yes, but the trend is for the big ISPs to use ARF, which sort of > defeats the > > idea of humans filling out forms. > >This is getting WAY off topic, but: > >ARF is really meant to be a format for ISPs to report abuse to one >another. For example, when an AOLer clicks the "Report Spam" button, >AOL pastes up an ARF format message and sends it to the entity who >controls the IP address from which AOL received the original message. >This only works if that entity has registered an email address with >AOL's "feedback loop" service. > >ARF is not intended for use by end users making spam complaints to >abuse desks. This is why the RFC clearly states that you must answer certain email addresses; abuse@ being one! If you don't follow the RFC's than how can anyone expect your protocols or operations to be compliant with any standards? Now, someone decided, in their infinite wisdom, that if you send an auto-reply directing you to a web form, that this is compliant.. where as I read it as a cheat! That does not allow me to use the abuse@ address for the function it was intended and as stated earlier: I DO NOT HAVE TIME IN A DAY TO GO REPORTING SOME ADMINISTRATOR'S DEFICIENCY IN POLICING HIS/HER OWN USERS THROUGH A PROPRIETARY WEB FORM. Therefore, I have been given authority to block them, meeting my management's criteria. Make sure your rules meet the RFCs and your management's criteria and you will make your life a whole lot simpler.. Oh, and argue the RFC's with management, in case they do not understand! Cheers!

15 24

How to create custom CentOS5.2 iso?
by manoj kumar 04 Oct '08

04 Oct '08

Hi, I am very new to this community. I want to make a custom iso which contains CentOS5.2 & scopserv(asterisk based PBX). Please provide me the proper steps for creating an iso. I have created an iso but during installation, only CentOS5.2 rpms get installed & scopserv rpms doesn't install. Is genhdlist command is required? But this command is not working with latest anaconda-runtime version i.e. anaconda-runtime-11. Please help me as I am stuck somewhere. Thanx in advance. Manoj Kumar

1 0

CentOS-announce Digest, Vol 44, Issue 3
by centos-announce-request＠centos.org 04 Oct '08

04 Oct '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0890 Moderate CentOS 4 s390(x) wireshark - security update (Pasi Pirhonen) 2. CESA-2008:0847 Important CentOS 5 x86_64 libtiff Update (Karanbir Singh) 3. CESA-2008:0847 Important CentOS 5 i386 libtiff Update (Karanbir Singh) 4. CEBA-2008:0933 CentOS 5 i386 initscripts Update (Karanbir Singh) 5. CEBA-2008:0933 CentOS 5 x86_64 initscripts Update (Karanbir Singh) 6. CESA-2008:0890 Moderate CentOS 5 i386 wireshark Update (Karanbir Singh) 7. CESA-2008:0890 Moderate CentOS 5 x86_64 wireshark Update (Karanbir Singh) 8. CESA-2008:0908 Moderate CentOS 5 i386 thunderbird Update (Karanbir Singh) 9. CESA-2008:0908 Moderate CentOS 5 x86_64 thunderbird Update (Karanbir Singh) 10. CESA-2008:0890 Moderate CentOS 3 s390(x) wireshark - security update (Pasi Pirhonen) 11. CESA-2008:0908 Moderate CentOS 4 x86_64 thunderbird - security update (Johnny Hughes) 12. CESA-2008:0908 Moderate CentOS 4 i386 thunderbird - security update (Johnny Hughes) 13. CESA-2008:0890 Moderate CentOS 4 i386 wireshark - security update (Johnny Hughes) 14. CESA-2008:0890 Moderate CentOS 4 x86_64 wireshark - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 3 Oct 2008 18:27:41 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0890 Moderate CentOS 4 s390(x) wireshark - security update To: centos-announce(a)centos.org Message-ID: <20081003152741.GA5793(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0890 https://rhn.redhat.com/errata/RHSA-2008-0890.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/wireshark-1.0.3-3.c4.s390.rpm updates/s390/RPMS/wireshark-gnome-1.0.3-3.c4.s390.rpm s390x: updates/s390x/RPMS/wireshark-1.0.3-3.c4.s390x.rpm updates/s390x/RPMS/wireshark-gnome-1.0.3-3.c4.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss