- Discuss - lists.centos.org

realtek 8211CL driver centos 5.2 x86_64
by Jerry Geis 29 Aug '08

29 Aug '08

Anyone know how to get the realtek 8211CL network driver working on an ASUS M3N78 motherboard? I was able to get the SATA disks to work with using the pci=nomsi boot option. Jerry

2 1

HIP rpms for Centos 5.2
by Robert Moskowitz 29 Aug '08

29 Aug '08

For anyone that is interested in looking at HIP, I have posted the latest HIP build on my server: http://htt-consult.com/~rgm/hip/ You don't need the src rpm, the others will do. Since we do not have the IPsec ESP BEET mode patch (http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-09.txt) for the 2.6.18 kernel (it is in the 2.6.27 kernel), we have to run HIP in userspace. For this you have to run hipfw with at least -i to get the userspace mode working. You should also include -A if you want to accept any HIP traffic. Well read the hipfw docs. If anyone does try it, let me know.

1 0

unix2dos did NOT fix line wrap problem on PC
by mcclnx mcc 29 Aug '08

29 Aug '08

I have log files will mail from LINUX to my PC (MS exchange and outlook). When I look the E-MAIL, the log file line is unwrap. My script did use "unix2dos" to convert format. anyone know why? ====== script ============= tail -30 /var/log/messages > /tmp/diskmsg.log unix2dos /tmp/diskmsg.log mail -s "Check log" dba101(a)yahoo.com </tmp/diskmsg.log _________________________________________________________________________________________________________ 知識+ 的電玩高手全都在這裡！ http://tw.knowledge.yahoo.com/dir/group_buzz?time=total&type=article&sid=39…

8 8

Re: Curmudgeoning (was Re: Problems with writing, Dual Layer DVD)
by David G. Miller 29 Aug '08

29 Aug '08

Scott Silva <ssilva(a)sgvwater.com> wrote: > on 8-28-2008 4:15 PM William L. Maltby spake the following: >> > On Thu, 2008-08-28 at 15:50 -0700, Scott Silva wrote: >> >>> >> <snip> >>> >> > >> >>> >> I have motherboards in my garage older than you! ;-D >>> >> > >> > PIKER! I've mobos still running (when I fire 'em up). Although I'm >> > seriously considering ditching the 386SX with Win 3.11. Don't find any >> > reason to fire it up anymore. >> > >> > Hell, even at my age I've got more memory left than it ever had! :-)) >> > >> >>> >> <snip> >>> >> > >> > I don't think I kept anything lower than a 486. You never know if you might > need it! > One of my projects of the moment is to get rid of all of the old motherboards and systems in my basement. I'm thinking I'll keep one working system/MB that has ISA slots. Not sure which one yet but probably either the Pentium or a K6/2 550Mhz. I've got W2K running in a qemu virtual machine on my current desktop so I'm guessing I can get any older versions of Windows working if I have to. I just can't virtualize an ISA slot if the need arises. A few things hanging around the basement I *won't* part with though as part of this clean up: - A still shrink wrapped copy of Windows/386 (media is 5.25 inch floppies) - A true blue (IBM logo) PC-AT (6 MHz 80286) with a full height 30MB hard drive and 1MB of RAM, DOS 3.3. Also, I've still got at least one punch card from my college days (Ohio State in the late '70s). I usually hang it on my cubicle wall when I'm working a regular gig. Most of the kids have never seen one before. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

new software raid installs
by Jerry Geis 29 Aug '08

29 Aug '08

I have noticed that when I do software raid installed (RAID1) that I reboot and one of the first things it says is md1 is not in sync doing background reconstruction... md0 is my /root partition md1 is my /home partition why would md1 not be in sync after an install. Jerry

4 3

Xen HVM and tap:aio
by Lane Bryson 29 Aug '08

29 Aug '08

Hello, I'm wondering if anyone out there is doing tap:aio disk devices on a Xen HVM vm with any success. Please let me know if you are, and perhaps your version info and a config file snippet. I've posted this to the xen-users list, and what I'm trying to do seems to be correct, works on Ubuntu, Debian, and XenSource; but it doesn't work on CentOS. Here's the snippet from my config. More info in the message below: builder = "hvm" kernel = "/usr/lib/xen/boot/hvmloader" acpi = 0 apic = 0 device_model = "/usr/lib64/xen/bin/qemu-dm" disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,hda,w", "tap:aio:/xen/iso/win2003r2_std_32bit_disk1of2.iso,hdc :cdrom,r" ] ---------- Forwarded message ---------- From: - <debaan(a)gmail.com> Date: Thu, Aug 28, 2008 at 2:27 PM Subject: HVM and tap:aio? To: xen-users(a)lists.xensource.com Hello, I'm not able to use tap:aio disk definitions with my HVM domU's. Is this supposed to work on this version of Xen, or am I doing something wrong? I've tried everything I can think of. file: works, but not tap:aio: , and I understand that file: will cause OOMkiller if using NFS mounts and is deprecated. Likewise, tap:aio: for cdrom does not allow me to boot off of cdrom; file: does work fine. Furthermore, any time I use tap:aio, the bochs bios of the hvm domU shows the hard disk size as 0 MBytes. Any disk definition that I use that has tap:aio: gives the result either (if tap:aio:/xen/foo/foo.img,xvda,w): Booting from Hard Disk... Boot from Hard Disk failed: could not read the boot disk or (if specifying tap:aio:/xen/foo/foo.img,hda,w) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes) Boot from Hard Disk failed: could not read the boot disk Host: CentOS 5.2 x86_64, kernel 2.6.18-92.1.6.el5xen Xen version: 3.1.2-92.1.6.el5 xen_caps: xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 selinux: disabled for testing domU: OS doesn't appear to matter; domU OS won't start loading at all. disk lines I've tried: # disk recognized as 0/1 MB, can't install #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,ioemu:sda,w", "file:/xen/iso/Win2003r2_std_32bit.iso,hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,sda,w", "file:/xen/iso/Win2003r2_std_32bit.iso,hdc:cdrom,r" ] #disk = [ "file:/xen/ausmsit05/ausmsit05.raw,hda,w", "file:/xen/iso/Win2003r2_std_32bit.iso,hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,sda1,w", ",hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,xvda,w", ",hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,hda:ioemu,w", ",hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,ioemu:hda,w", ",hdc:cdrom,r" ] #disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,ioemu:xvda,w", "phy:/dev/scd0,ioemu:xvdc:cdrom,r" ] # Boot from Hard Disk failed: could not read the boot disk disk = [ "tap:aio:/xen/ausmsit05/ausmsit05.raw,hda,w", "tap:aio:/xen/iso/win2003r2_std_32bit_disk1of2.iso,hdc:cdrom,r" ] in the last example, this is the output of xm block-list ausmsit05 --long (768 ((backend-id 0) (virtual-device 768) (device-type disk) (state 1) (backend /local/domain/0/backend/tap/55/768) ) ) (5632 ((backend-id 0) (virtual-device 5632) (device-type cdrom) (state 1) (backend /local/domain/0/backend/tap/55/5632) ) ) and this is from xend.log: [2008-08-28 14:18:09 xend 3692] DEBUG (blkif:24) exception looking up device number for hda: [Errno 2] No such file or directory: '/dev/hda' [2008-08-28 14:18:09 xend 3692] DEBUG (DevController:110) DevController: writing {'backend-id': '0', 'virtual-device': '768', 'device-type': 'disk', 'state': '1', 'backend': '/local/domain/0/backend/tap/55/768'} to /lo cal/domain/55/device/vbd/768. [2008-08-28 14:18:09 xend 3692] DEBUG (DevController:112) DevController: writing {'domain': 'ausmsit05', 'frontend': '/local/domain/55/device/vbd/768', 'format': 'raw', 'dev': 'hda', 'state': '1', 'params': 'aio:/xen/ausmsit05/ausmsit05.raw', 'mode': 'w', 'online': '1', 'frontend-id': '55', 'type': 'tap'} to /local/domain/0/b ackend/tap/55/768. [2008-08-28 14:18:09 xend 3692] DEBUG (blkif:24) exception looking up device number for hdc: [Errno 2] No such file or directory: '/dev/hdc' [2008-08-28 14:18:09 xend 3692] DEBUG (DevController:110) DevController: writing {'backend-id': '0', 'virtual-device': '5632', 'device-type': 'cdrom', 'state': '1', 'backend': '/local/domain/0/backend/tap/55/5632'} to /local/domain/55/device/vbd/5632. [2008-08-28 14:18:09 xend 3692] DEBUG (DevController:112) DevController: writing {'domain': 'ausmsit05', 'frontend': '/local/domain/55/device/vbd/5632', 'format': 'raw', 'dev': 'hdc', 'state': '1', 'params': 'aio:/xen/iso/win2003r2_std_32bit_disk1of2.iso', 'mode': 'r', 'online': '1', 'frontend-id': '55', 'type': 'tap'} to /lo cal/domain/0/backend/tap/55/5632. Thank you in advance for any help you can offer.

2 1

CentOS-announce Digest, Vol 42, Issue 11
by centos-announce-request＠centos.org 29 Aug '08

29 Aug '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0648 Important CentOS 5 i386 tomcat5 Update (Karanbir Singh) 2. CESA-2008:0648 Important CentOS 5 x86_64 tomcat5 Update (Karanbir Singh) 3. CESA-2008:0863-01: Important CentOS 2 i386 libtiff security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 28 Aug 2008 23:01:41 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0648 Important CentOS 5 i386 tomcat5 Update To: centos-announce(a)centos.org Message-ID: <20080828220141.GA20513(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0648 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0648.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: c734374fd4c1b01b0de140dec457191e tomcat5-5.5.23-0jpp.7.el5_2.1.i386.rpm cbcc5625b147fd60528accff52ae6504 tomcat5-admin-webapps-5.5.23-0jpp.7.el5_2.1.i386.rpm e734a99b5332bec54776322377a34b3b tomcat5-common-lib-5.5.23-0jpp.7.el5_2.1.i386.rpm 5453cd446682ccbfcb27b953cbf51bca tomcat5-jasper-5.5.23-0jpp.7.el5_2.1.i386.rpm 967e0961aff3640927ab4b7ac9d971e8 tomcat5-jasper-javadoc-5.5.23-0jpp.7.el5_2.1.i386.rpm 2ecf6542b6e80d4048962b334afacfcf tomcat5-jsp-2.0-api-5.5.23-0jpp.7.el5_2.1.i386.rpm e8429b70d77822f9a74c18c5423327ef tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.7.el5_2.1.i386.rpm ae1ef29d5b9c4de4530a32ab7763cae8 tomcat5-server-lib-5.5.23-0jpp.7.el5_2.1.i386.rpm e7057b9bdf2405699cf2314229bfef28 tomcat5-servlet-2.4-api-5.5.23-0jpp.7.el5_2.1.i386.rpm 444f64a54d96e2ca0337954ba2127e16 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.7.el5_2.1.i386.rpm e20b64e80ac54a4d3a1d3081a14a33a1 tomcat5-webapps-5.5.23-0jpp.7.el5_2.1.i386.rpm Source: cb7239b7652235a6ca1f071d077bba44 tomcat5-5.5.23-0jpp.7.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 28 Aug 2008 23:01:41 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0648 Important CentOS 5 x86_64 tomcat5 Update To: centos-announce(a)centos.org Message-ID: <20080828220141.GA20526(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0648 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0648.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 57c5fa963dfa5d8c7d803bdb45bcacbf tomcat5-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 7f9a6b53bedd90d55bb102eeaf7f5190 tomcat5-admin-webapps-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 2232b4f300cd3e5727feb2792538c957 tomcat5-common-lib-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 777bb2cb9944d5684f74a2359d212460 tomcat5-jasper-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 7d97a8badecebd3160cb097959c31558 tomcat5-jasper-javadoc-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 1ad97060c50877d9f56c5b21eae30fa7 tomcat5-jsp-2.0-api-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 5ced478472279e95b32500951bcc51e8 tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 972cc8e64e5ef402939c44d884c534f1 tomcat5-server-lib-5.5.23-0jpp.7.el5_2.1.x86_64.rpm 99422eeb42ff8dc2633f8ca13e4c5cf2 tomcat5-servlet-2.4-api-5.5.23-0jpp.7.el5_2.1.x86_64.rpm aaa91d8800238bebb6b6af814935bb13 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.7.el5_2.1.x86_64.rpm a30fd711d57bbd6ebfa3d9e4caf72bf0 tomcat5-webapps-5.5.23-0jpp.7.el5_2.1.x86_64.rpm Source: cb7239b7652235a6ca1f071d077bba44 tomcat5-5.5.23-0jpp.7.el5_2.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 29 Aug 2008 10:41:41 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2008:0863-01: Important CentOS 2 i386 libtiff security update To: centos-announce(a)centos.org Message-ID: <48B745C5.90008(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2008:0863-01 Important: libtiff security update Files available: libtiff-3.5.7-31.el2.i386.rpm libtiff-devel-3.5.7-31.el2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 42, Issue 11 ***********************************************

1 0

lmsensors support in net-snmp
by Andrew Hearn 29 Aug '08

29 Aug '08

Hello, I'm wanting to use cacti* to graph my motherboard fan/temperature/voltage readings. I have sensors working and it giving me the temperatures ets, but it seems that net-snmp needs to be compiled with sensors/lmsensors support. Is there a centos 5 rpm for net-snmp that support this? Thanks. *http://forums.cacti.net/viewtopic.php?t=11590

1 0

iptables question
by Joseph L. Casale 29 Aug '08

29 Aug '08

When do you know you need the "-m multiport" option? I see examples with -dport xx:xxx for example that sometimes use it and sometimes don't? I have read the man page and see what "-m multiport" requires, but don't see the requirement involving its use. Thanks! jlc

5 10

problem with slave dns servers
by Mark Quitoriano 29 Aug '08

29 Aug '08

Hi, I have 4 bind9 dns installed on centos 4. My primary dns server went down and all of my domains doesn't resolve even if the 3 slave dns is up and running. Im not sure where to configure this is it in my domain registration or in bind? -- Regards, Mark Quitoriano Blog | http://mark.quitoriano.org VicidialNOW! | http://www.vicidialnow.com APUG! | http://asterisk.org.ph

4 8

buildinstall problems
by treed＠ultraviolet.org 28 Aug '08

28 Aug '08

Hello all! I am trying to make a stripped down CentOS 5.2 distro which will all fit on a single CD containing just the base and a few other packages I need. I run buildinstall like so: sudo /usr/lib/anaconda-runtime/buildinstall --debug --version 5 --product CentOS --comps /var/www/html/centos/5.2/os/x86_64/repodata/comps.xml --release My-CentOS-5.2 --prodpath CentOS /var/www/html/centos/5.2/os/x86_64 and when I do so I run into the following errors: Expanding packages... retrieving timezones Creating nsswitch.conf Creating libuser.conf Creating fedorakmod.conf Creating multipath.conf Fixing up /etc/man.config to point into /mnt/sysimage Running mkfontdir... Creating SELinux policy... libsemanage.semanage_install_sandbox: genhomedircon returned error code 1. Getting pango modules Getting gtk2 input method modules Getting gtk2 gdk-pixbuf loaders Scrubbing trees... /tmp/treedir.9508/image-template cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/raidstart': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/raidstop': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/losetup': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/pump': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/list-harddrives': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/kudzu-probe': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/loadkeys': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/mknod': No such file or directory cp: cannot create regular file `/tmp/treedir.9508/image-template/usr/bin/syslogd': No such file or directory mv: cannot move `/tmp/treedir.9508/image-template/usr/sbin/anaconda' to `/tmp/treedir.9508/image-template/usr/bin/anaconda': No such file or directory ln: creating symbolic link `/tmp/treedir.9508/image-template/bin/sh' to `busybox': No such file or directory ERROR: directory missing: /tmp/treedir.9508/image-template/bin Aborting instroot creation... Creating repository metadata... When I look in /tmp/treedir.9508/image-template I notice that the bin directory indeed does not exist. I've googled and the closest thing I can find to my problem is this: http://osdir.com/ml/redhat.anaconda.devel/2002-07/msg00010.html in that he says the bin dirs are missing also but he says one is a file and I don't have anything named bin there at all. He also gets some different errors as a result of bin being missing it seems. My repository contains (among many others) the following packages which would seem to be relevant: anaconda-11.1.2.113-1.el5.centos.2.x86_64.rpm anaconda-runtime-11.1.2.113-1.el5.centos.2.x86_64.rpm busybox-1.2.0-4.el5.centos.x86_64.rpm busybox-anaconda-1.2.0-4.el5.centos.x86_64.rpm busybox-anaconda-1.2.0-4.el5.centos.x86_64.rpm And while I'm here, another question: What might cause this selinux error which gets generated (as seen above): libsemanage.semanage_install_sandbox: genhomedircon returned error code 1. If I point this same buildinstall command at a CentOS repo that contains all of the rpm's that CentOS normally ships with the build proceeds without error. No missing bin and no selinux error. So I must be missing an rpm. But I'm not sure which one and I need to get this paired down to a single CD so I can't just dump them all in. Thanks for any help you can provide! -- Tracy Reed http://tracyreed.org

2 2

Problem with gnome with file type recognition.
by ArcosCom Linux User 28 Aug '08

28 Aug '08

I have a problem with some file recognition with gnome (CentOS 5.2). I have some DVD with AVI files I burn some time ago (and the files were checked and the DVD are fine), and curiously only the 3 or 4 first files were recognized as AVI files, but the rest not!. I another times, appears to recognize all files, but from some days to now I have this problem (specially with AVI files). The recognized files are played fine with xine, mplayer or vlc, but the rest not, the players don't know how to play them (very courious this issue). Do anyone know how to solve this? Could be any system component that wasn't working fine? (as any daemon, or the DVD reader) Anyone know how to test my DVD writer/reader or any system/gnome components that could be missconfigured or not working? Regards

3 2

CentOS Mailing list on nabble . why not ??
by kapil singh 28 Aug '08

28 Aug '08

Hello All, I would like to know that like other communities why not our Cent OS Community is on Nabble. I think it is better for us if we will be there on. -- Thanks and Regards, Kapil Singh Kushwah Linux System/Network Administrator Hotwax Media Inc. Indore,(M.P) INDIA

7 15

How to enable bind to listen querys from all my network
by Miguel A. Velasco 28 Aug '08

28 Aug '08

Hello all, I´ve installed a proxy Squid in my gateway and a Cache DNS Server with bind. The problem is the server is only resolving is own querys but not the client queries from my company. When I do: $service named start I see in /var/log/messages: starting BIND 9.3.4-P1 -u named -t /var/named/chroot found 1 CPU, using 1 worker thread loading configuration from '/etc/named.conf' listening on IPv6 interface lo, ::1#53 listening on IPv4 interface lo, 127.0.0.1#53 command channel listening on 127.0.0.1#953 command channel listening on ::1#953 zone 0.in-addr.arpa/IN/localhost_resolver: loaded serial 42 zone 0.0.127.in-addr.arpa/IN/localhost_resolver: loaded serial 1997022700 zone 255.in-addr.arpa/IN/localhost_resolver: loaded serial 42 zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN/localhost_resolver: loaded serial 1997022700 zone localdomain/IN/localhost_resolver: loaded serial 42 zone localhost/IN/localhost_resolver: loaded serial 42 running I don´t understand why is only "listening on IPv4 interface lo, 127.0.0.1#53" I have bind-chroot installed with the following options in /etc/named.conf: options { listen-on port 53 { 127.0.0.1; 10.10.80.0; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { localhost; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view localhost_resolver { match-clients { localhost; }; match-destinations { localhost; }; recursion yes; include "/etc/named.rfc1912.zones"; }; Where 10.10.80.0 is my network range. What may I do my server really listen for all my network? Nowadays it´s listenning just itself .... Thanks very much for your attention. Miguel A. Velasco

6 10

Various OpenGL apps crashing in CentOS 5?
by Rubin 28 Aug '08

28 Aug '08

Hi All, I'm experiencing odd behaviour with various OpenGL apps I'm (trying to) use. I have an IBM Thinkpad X60s with the Intel GMA chipset, the 945GM to be precise. I have glxinfo/glxgears working normally, disabled composite in xorg.conf and everything seems fine. However, there are a few applications that I use that show rather strange behaviour that I think is related to the same underlying (as yet unidentified) problem. Here is my list: * Google Earth 4.3 Installed in /opt/googleearth. Starts, but with extremely slow performance. Unusable, Closing the window takes about 10 seconds. * OpenOffice 2.4.0 Installed in /opt/openoffice. Failed to start when using the "intel" or "i810" Xorg driver. "vesa" driver works fine. Later learned that setting GTK_MODULES="" works around the problem while using the "intel" or "i810" drivers and that it might have to do with the gnome integration stuff in OpenOffice. * Maya 2008 Installed in /opt/maya. Fails to start (sig 11) when using the "intel" or "i810" Xorg driver. "vesa" driver works fine (but with abominable 3D performance obviously). A gdb backtrace tells me: #0 0x00000000 in ?? () #1 0xad1e3427 in _mesa_endDispatchOverride () from /usr/lib/dri/i915_dri.so #2 0xad1e3c54 in _mesa_make_current () from /usr/lib/dri/i915_dri.so #3 0xad1beb18 in intelMakeCurrent () from /usr/lib/dri/i915_dri.so #4 0xad1a4531 in __driUtilUpdateDrawableInfo () from /usr/lib/dri/i915_dri.so #5 0x00aa8c5c in glXDestroyContext () from /usr/lib/libGL.so.1 #6 0x00aaae3f in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1 #7 0x00aab0e3 in glXMakeCurrent () from /usr/lib/libGL.so.1 #8 0xb48cf778 in GlXCreateMDraw () from /opt/maya/lib/lib3dGraphics.so #9 0x07e7f4e1 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #10 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #11 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #12 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #13 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #14 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #15 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #16 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #17 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #18 0x07e7f663 in XtUnrealizeWidget () from /usr/lib/libXt.so.6 #19 0x07e7f91e in XtRealizeWidget () from /usr/lib/libXt.so.6 #20 0xb54900d2 in Twindow::unStow () from /opt/maya/lib/libExtensionLayer.so #21 0xb547162e in TiceShowWindowCmd::doCommand () from /opt/maya/lib/libExtensionLayer.so #22 0xb5ac16f1 in Mel_Command_Dispatch () from /opt/maya/lib/libCommandEngine.so #23 0xb5ae4160 in node_exec () from /opt/maya/lib/libCommandEngine.so #24 0xb5b060eb in fc_if () from /opt/maya/lib/libCommandEngine.so #25 0xb5ae4160 in node_exec () from /opt/maya/lib/libCommandEngine.so #26 0xb5ae4326 in sophia_call_executable () from /opt/maya/lib/libCommandEngine.so #27 0xb5b0085a in SophiaExecutable::evaluate () from /opt/maya/lib/libCommandEngine.so #28 0xb5ac6e43 in TcommandEngine::sourceFile () from /opt/maya/lib/libCommandEngine.so #29 0x08059e66 in TmayaApp::initGUI () #30 0xb533bc10 in Tapplication::start () from /opt/maya/lib/libExtensionLayer.so #31 0x08054e96 in appmain () #32 0x080640d6 in main () I'm fairly sure this has something to do with the mesa 3d driver for the Intel 945GM but I cannot confirm this and I would like to search further. Does anyone have any suggestions as to where I could look next? Thanks in advance, Kind regards, Rurib.

3 4

yum provides on centos 5.2
by Jerry Geis 28 Aug '08

28 Aug '08

I am trying things like "yum provides alsamixer" on centox 5.2 i386 and x86_64 also "yum provides vi" "yum provides gvimdiff" "yum provides dumpiso" "yum provides uname" All of these return "no matches found" is something broke??? These are just examples. I was trying to do "yum provides xf86Modes.h" it returns no matches also. Jerry

7 7

loading modules across reboots
by Joseph L. Casale 28 Aug '08

28 Aug '08

I have a CentOS 5.2 install on a machine with the Marvell nic issue outlined in http://bugs.centos.org/view.php?id=2612. I have a few questions regarding this, what does the # echo "11ab 4364" > /sys/bus/pci/drivers/sky2/new_id line do? Obviously it starts right after but what specifically is the "11ab 4364" part? Also, how do I get this to load across reboots? I have the alias and module in my modprobe.conf but that is not enough. Thanks, jlc

5 10

virtual machine question
by Jerry Geis 28 Aug '08

28 Aug '08

I am running a virtual machine with kvm-72. my virtual machine is address 10.0.2.15 it has access to the network and all that. How can I have my host be able to copy a file FROM the guest??? my guest can copy files to the host but I would like to do the other way... My host has address 192.168.1.8. The host cannot ping the 10.0.2.15 address or anything... How do I do that? Jerry

2 1

CentOS-announce Digest, Vol 42, Issue 10
by centos-announce-request＠centos.org 28 Aug '08

28 Aug '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0836 Moderate CentOS 5 x86_64 libxml2 Update (Karanbir Singh) 2. CESA-2008:0836 Moderate CentOS 5 i386 libxml2 Update (Karanbir Singh) 3. CESA-2008:0836 Moderate CentOS 5 i386 libxml2 Update (Karanbir Singh) 4. CESA-2008:0836 Moderate CentOS 5 x86_64 libxml2 Update (Karanbir Singh) 5. CESA-2008:0849 Important CentOS 5 i386 ipsec-tools Update (Karanbir Singh) 6. CESA-2008:0849 Important CentOS 5 x86_64 ipsec-tools Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 27 Aug 2008 21:58:41 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0836 Moderate CentOS 5 x86_64 libxml2 Update To: centos-announce(a)centos.org Message-ID: <20080827205841.GA8866(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0836 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: b9bd68fd5161263814580032fdcd3b1c libxml2-2.6.26-2.1.2.3.i386.rpm 2a2107f6e99afd3c0e0cfef742cf2a96 libxml2-2.6.26-2.1.2.3.x86_64.rpm 94f1ad5775ecc655f74e9aad24e50311 libxml2-devel-2.6.26-2.1.2.3.i386.rpm 50b2d4d9399819048645a016c01dfcbd libxml2-devel-2.6.26-2.1.2.3.x86_64.rpm 4ff35c872a7427701b02262a3119e995 libxml2-python-2.6.26-2.1.2.3.x86_64.rpm Source: 6fc7a7b5b96e3d5cdaf54390d2cca583 libxml2-2.6.26-2.1.2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 27 Aug 2008 21:58:41 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0836 Moderate CentOS 5 i386 libxml2 Update To: centos-announce(a)centos.org Message-ID: <20080827205841.GA8852(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0836 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 9b6e135244e4079824ae1341a30b1fa7 libxml2-2.6.26-2.1.2.3.i386.rpm af041f25eb0535c1fa87702f74aa00be libxml2-devel-2.6.26-2.1.2.3.i386.rpm 2d0885854a285e782db0bb7afee0e7c3 libxml2-python-2.6.26-2.1.2.3.i386.rpm Source: 6fc7a7b5b96e3d5cdaf54390d2cca583 libxml2-2.6.26-2.1.2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 27 Aug 2008 22:01:17 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0836 Moderate CentOS 5 i386 libxml2 Update To: centos-announce(a)centos.org Message-ID: <20080827210117.GA9090(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0836 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 9297215f91d58d289a516ec2e0c623b7 libxml2-2.6.26-2.1.2.4.i386.rpm 728e4df5aea9871f76a6cee28a884732 libxml2-devel-2.6.26-2.1.2.4.i386.rpm 4ae3aa61aba94cd9dfcfb6258df9f7f4 libxml2-python-2.6.26-2.1.2.4.i386.rpm Source: 3c39593e6e1a9fc5dd3be8954391dffa libxml2-2.6.26-2.1.2.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 27 Aug 2008 22:01:17 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0836 Moderate CentOS 5 x86_64 libxml2 Update To: centos-announce(a)centos.org Message-ID: <20080827210117.GA9104(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0836 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0836.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 7bd7f72f05147138af5582beee96319b libxml2-2.6.26-2.1.2.4.i386.rpm e9395c2c7dd76bcea23c1e0091b0123b libxml2-2.6.26-2.1.2.4.x86_64.rpm e4c618258087e0e1f3d82f14610e01c3 libxml2-devel-2.6.26-2.1.2.4.i386.rpm e3e6fa248c1b6cc6df56e039d7d9f6e3 libxml2-devel-2.6.26-2.1.2.4.x86_64.rpm 1e5a782ce746de8e9791762db8c260ef libxml2-python-2.6.26-2.1.2.4.x86_64.rpm Source: 3c39593e6e1a9fc5dd3be8954391dffa libxml2-2.6.26-2.1.2.4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 27 Aug 2008 22:04:35 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0849 Important CentOS 5 i386 ipsec-tools Update To: centos-announce(a)centos.org Message-ID: <20080827210435.GA9273(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0849 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0849.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 454828f6e3176da0bce18da666cc0e51 ipsec-tools-0.6.5-9.el5_2.3.i386.rpm Source: c1bacf187fc0e9b25fe8e57b5560d78d ipsec-tools-0.6.5-9.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 27 Aug 2008 22:04:36 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2008:0849 Important CentOS 5 x86_64 ipsec-tools Update To: centos-announce(a)centos.org Message-ID: <20080827210436.GA9289(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2008:0849 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2008-0849.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 9803ebb70d559dd5d6734b83e93c9f53 ipsec-tools-0.6.5-9.el5_2.3.x86_64.rpm Source: c1bacf187fc0e9b25fe8e57b5560d78d ipsec-tools-0.6.5-9.el5_2.3.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 42, Issue 10 ***********************************************

1 0

system-config-kickstart
by Jerry Geis 28 Aug '08

28 Aug '08

When I run this command on centos 5.2 it just sets there nothing ever happens. Any ideas? I have ran it on two centos 5.2 machines. I can control C out. I am running it as root and a normal user both. Same thing - just sits there. jerry

3 3

Unable to install CentOS 5.2 on New HP Intel Core 2 Quad
by Michael Peterson 28 Aug '08

28 Aug '08

Our new lab has HP Intel Core 2 Quad systems with DVD/CDRW and SATA. I can provide the model number if needed. They stop on kernel startup when trying to boot the CentOS 5.2 boot CD. It is during ACPI. I have tried linux noprobe and linux pci=noacpi and linux noprobe pci=noacpi. I still cannot get to the first install screen. Fedora 10 Live will not but up either. I am using Fedora 9 from Live and DVD Install to teach a fall class and it works fine. Would CentOS 5.3 possibly work once it is released?

5 4

Strategy for using CentOS on laptops in an NIS environment
by Alfred von Campe 28 Aug '08

28 Aug '08

We use NIS (ypbind) and Kerberos at work for all our Linux and Unix systems. Home directories are mounted via autofs from an NIS map. Everything works just fine as long as all network resources are available (however, things turn ugly when the NIS servers are not reachable). Some users also want to start using laptops and bring them home or on trips to continue working while not at the office. Of course, their home directories won't be available and neither will other network resources. Creating local accounts with the same UIDs and local home directories solves most of the problems. However, I can't create a local account with useradd while ypbind is running because it complains that that account already exists. Is there a better way to create a local account then "service ypbind stop; useradd...; service ypbind start"? What are other strategies that you use to deal with off- network use in an NIS environment? Alfred

3 2

Centos 5.2, Firefox 3, and IPv6
by Robert Moskowitz 28 Aug '08

28 Aug '08

I am doing some testing and it almost seems as if Firefox 3.0.1 that comes with Centos 5.2 is NOT working with IPv6. Anyone know for sure? I am getting weird hang behaviours and other just not working things.

4 13

nsswitch.conf, ldap, local groups problem
by Mark Hennessy 28 Aug '08

28 Aug '08

I'm using CentOS 5.0,5.1, and 5.2 on several systems where I'm seeing this problem. Hello, I'm seeing a weird problem that perhaps someone has run into with groups. First, a little background. I was made aware of a problem with CentOS 5 where if the nscd password cache is clear and someone tries to log in if there is no network connection with an LDAP account that it just hangs. Even worse, if the machine is rebooted and it continues to have no network connection, even root login doesn't work. I messed around with nsswitch.conf to fix this problem. I altered these lines as so: passwd: files [!NOTFOUND=return] ldap shadow: files [!NOTFOUND=return] ldap group: files [!NOTFOUND=return] ldap and the problem seemed to go away. But now, here's the weird stuff: I have defined in my local /etc/groups file this line: group1:x:100:apache group2:x:101:apache 'getent group groupname' shows the right info: # getent group group1 group1:x:100:apache # sudo -u apache bash $ groups apache I revert back to my old config: # sudo -u apache bash $ groups apache group1 group2 Also, something else that's interesting. If I do this: passwd: files [!NOTFOUND=return] ldap shadow: files [!NOTFOUND=return] ldap group: ldap [NOTFOUND=continue] files and reboot, udev segfaults and the system freezes up after a few more seconds. Starting udev: /sbin/start_udev: line 43: 519 Segmentation fault "$@" $ARGS /sbin/start_udev: line 201: 523 Segmentation fault /sbin/udevd -d Wait timeout. Will continue in the background.[FAILED] Any advice?

6 17

System goes into read only mode - not the same as posted earlier
by Stephen Moccio 28 Aug '08

28 Aug '08

Hello all, I’m at my wits end trying to resolve this. We are running centos 4.5 on Intel hardware. Dual SCSI disk drives mirrored on an LSI Logic controller. Every once in a while and not always on the same server and not only on the local SCSI Drives. System A – Dual internal drives on /dev/sda System B – Dual internal drives on /dev/sdc with a DAS on /dev/sda. Each of these systems experienced a kernel mptbase error and placed /dev/sda into read only mode. Note again the /dev/sda isn’t always local. For system A – remounting in ro mode didn’t work and the system had to be rebooted. File system check and bad block checks showed nothing and when the system was rebooted – it was fine. A portion of the messages log is below. I would appreciate any ideas or directions. Thanks, Steve Moccio Aug 7 01:00:06 sshd(pam_unix)[18336]: session opened for user root by (uid=0) Aug 7 09:00:36 kernel: mptscsi: ioc1: attempting task abort! (sc=f6f07c80) Aug 7 09:00:36 kernel: scsi1 : destination target 0, lun 0 Aug 7 09:00:36 kernel: command = Write (10) 00 00 00 fb d7 00 01 90 00 Aug 7 09:00:38 kernel: mptbase: Initiating ioc1 recovery Aug 7 09:00:44 kernel: drivers/message/fusion/mptctl.c@1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:01:19 last message repeated 10 times Aug 7 09:01:40 last message repeated 7 times Aug 7 09:01:41 kernel: mptbase: ioc1: ERROR - Diagnostic reset FAILED! (102h) Aug 7 09:01:41 kernel: mptbase: ioc1 NOT READY WARNING! Aug 7 09:01:41 kernel: mptbase: WARNING - (-1) Cannot recover ioc1 Aug 7 09:01:41 kernel: mptscsi: ioc1: Issue of TaskMgmt failed! Aug 7 09:01:41 kernel: mptscsi: ioc1: task abort: FAILED (sc=f6f07c80) Aug 7 09:01:41 kernel: mptscsi: ioc1: attempting bus reset! (sc=f6f07c80) Aug 7 09:01:41 kernel: scsi1 : destination target 0, lun 0 Aug 7 09:01:41 kernel: command = Write (10) 00 00 00 fb d7 00 01 90 00 Aug 7 09:01:41 kernel: mptbase: Initiating ioc1 recovery Aug 7 09:01:46 kernel: mptbase: ioc1: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000000! Aug 7 09:01:47 kernel: drivers/message/fusion/mptctl.c@1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:02:23 last message repeated 10 times Aug 7 09:02:44 last message repeated 7 times Aug 7 09:02:47 kernel: mptbase: ioc1: ERROR - Diagnostic reset FAILED! (102h) Aug 7 09:02:47 kernel: mptbase: ioc1 NOT READY WARNING! Aug 7 09:02:47 kernel: mptbase: WARNING - (-1) Cannot recover ioc1 Aug 7 09:02:47 kernel: mptscsi: ioc1: bus reset: FAILED (sc=f6f07c80) Aug 7 09:02:48 kernel: mptscsi: ioc1: Attempting host reset! (sc=f6f07c80) Aug 7 09:02:48 kernel: mptbase: Initiating ioc1 recovery Aug 7 09:02:51 kernel: drivers/message/fusion/mptctl.c@1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:02:51 kernel: drivers/message/fusion/mptctl.c@1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:02:53 kernel: mptbase: ioc1: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000000! Aug 7 09:02:58 kernel: drivers/message/fusion/mptctl.c@1985::mptctl_do_mpt_command - Busy with IOC Reset Aug 7 09:03:34 last message repeated 10 times Aug 7 09:03:48 last message repeated 5 times Aug 7 09:03:54 kernel: mptbase: ioc1: ERROR - Diagnostic reset FAILED! (102h) Aug 7 09:03:54 kernel: mptbase: ioc1 NOT READY WARNING! Aug 7 09:03:54 kernel: mptbase: WARNING - (-1) Cannot recover ioc1 Aug 7 09:03:54 kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0

1 0

RADVD address timeouts
by Robert Moskowitz 27 Aug '08

27 Aug '08

I am using RADVD to assign IPv6 addresses. It works for 'static' devices. I want it to work for devices that move to different networks without having to restart the network on those devices. So if I have a notebook on network Lab1 getting prefix 2607:7:4:1::64 and moves to network Lab2 where RADVD advertises prefix 2607:7:4:2::/64, I want the host to switch to the new address. This is NOT for MobileIP. Right now I get the new global address, but the old address never goes away. I have tried setting AdvPreferredLifetime, but that has not helped.

1 0

OT - Offline uncorrectable sectors
by Lorenzo Quatrini 27 Aug '08

27 Aug '08

I have few disk that have offline uncorrectables sectors; I found on this page how to identify the sectors and force a write on them to trigger the relocation of bad sectors on the disk: http://smartmontools.sourceforge.net/BadBlockHowTo.txt My question is: since I'm too lazy to follow all the procedure, do you think that a force rewrite of the full disk would work? Eg. "dd if=/dev/sda pf=/dev/sda bs=512" Shoudl this be done at runlevel 1 or offline or I can do it without too many worries, since I'm reading and rewriting the same data on the disk? TIA and sorry for the OT Lorenzo Quatrini

7 22

apache
by Mad Unix 27 Aug '08

27 Aug '08

How can I pass the following Oracle 10g variables to my apache? ORACLE_BASE=/u01/oracle ORACLE_HOME=/u01/oracle/10g ORACLE_SID=king LD_LIBRARY_PATH=$ORACLE_HOME/lib LD_LIBRARY_PATH_32=$ORACLE_HOME/lib32 PATH=$PATH:$ORACLE_HOME/bin NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256; export NLS_LANG NLS_DATE_FORMAT=dd-mm-yyyy ; export NLS_DATE_FORMAT export ORACLE_BASE ORACLE_HOME ORACLE_SID LD_LIBRARY_PATH LD_LIBRARY_PATH_32 PATH I start my apache through service httpd start... [root@king script]# ps -ef | grep apache apache 28494 15315 0 04:02 ? 00:00:01 /usr/sbin/httpd -k start apache 28495 15315 0 04:02 ? 00:00:01 /usr/sbin/httpd -k start apache 28496 15315 0 04:02 ? 00:00:00 /usr/sbin/httpd -k start apache 28497 15315 0 04:02 ? 00:00:01 /usr/sbin/httpd -k start apache 28499 15315 0 04:02 ? 00:00:01 /usr/sbin/httpd -k start apache 28500 15315 0 04:02 ? 00:00:01 /usr/sbin/httpd -k start apache 28502 15315 0 04:02 ? 00:00:00 /usr/sbin/httpd -k start apache 28503 15315 0 04:02 ? 00:00:00 /usr/sbin/httpd -k start root 31178 16299 0 08:36 pts/2 00:00:00 grep apache Thanks -- Madunix_at_Gmail Sysadmin "Computers are useless. They can only give you answers" - Pablo Picasso "Never trust a computer you can't throw out a window." - Steve Wozniak

9 12

restarting static-routes-ipv6
by Robert Moskowitz 27 Aug '08

27 Aug '08

I want to change the contents of my /etc/sysconfig/static-routes-ipv6 and NOT restart the network. Is there a way to do this??? I know about ifup and ifdown for interfaces, but what about routing (and IP6 at that).

3 5

CentOS-announce Digest, Vol 42, Issue 9
by centos-announce-request＠centos.org 27 Aug '08

27 Aug '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0849 Important CentOS 3 i386 ipsec-tools - security update (Tru Huynh) 2. CESA-2008:0849 Important CentOS 3 x86_64 ipsec-tools - security update (Tru Huynh) 3. CESA-2008:0836 Moderate CentOS 3 i386 libxml2 - security update (Tru Huynh) 4. CESA-2008:0836 Moderate CentOS 3 x86_64 libxml2 - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 27 Aug 2008 00:54:10 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2008:0849 Important CentOS 3 i386 ipsec-tools - security update To: centos-announce(a)centos.org Message-ID: <20080826225410.GA14569(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2008:0849 ipsec-tools security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0849.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/ipsec-tools-0.2.5-0.7.rhel3.5.i386.rpm source: updates/SRPMS/ipsec-tools-0.2.5-0.7.rhel3.5.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update ipsec-tools Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

Logwatch doesn´t report on dovecot
by henry ritzlmayr 27 Aug '08

27 Aug '08

Hi List, Centos 5(.2) ships with dovecot-1.0.7-2.el5 and logwatch-7.3-6.el5 However the shipped logwatch is not aware of dovecot 1.x meaning none of the log entries (var/log/maillog) are processed at all. Should I file a bug report on this? Upstream? cheers Henry

2 2

postfix install error: fatal file /etc/postfix/main.cf: parameter setgid_group: unknown group name: postdrop
by Rainer Traut 27 Aug '08

27 Aug '08

Hi, sys: Centos 5.2 x86_64 Trying to switch from sendmail to postfix I did: # yum remove sendmail which resulted in erasing of: mdadm sendmail-doc sendmail sendmail-cf mutt fetchmail redhat-lsb I did then: yum -y install redhat-lsb.x86_64 postfix and got this error: Installing: postfix ######################### [1/2] postfix: fatal: file /etc/postfix/main.cf: parameter setgid_group: unknown group name: postdrop warning: group postdrop does not exist - using root warning: group postdrop does not exist - using root warning: group postdrop does not exist - using root warning: group postdrop does not exist - using root Installing: redhat-lsb ######################### [2/2] I checked and indeed there is no group postdrop on the system. On an El5 system I see the group. Thx Rainer

3 8

OT: Port Scan
by Lanny Marcus 26 Aug '08

26 Aug '08

I just did a port scan on one of my web sites. Shared Hosting. Looking at ports 1863, 3000 and 3001. Are those ports normally open or something I should file a support ticket about? TIA! Port State Service 21 open ftp 22 open ssh 25 open smtp 80 open http 110 open pop3 143 open imap 443 open https 993 open imaps 995 open pop3s 1863 open msnp 3000 open hbci 3001 open redwood-broker 3306 open mysql 5190 open aol 5432 open postgres

4 6

(Global/Any) setting for "show hidden files?" - SOLVED
by MHR 26 Aug '08

26 Aug '08

On Mon, Aug 25, 2008 at 11:33 AM, MHR <mhullrich(a)gmail.com> wrote: > Is there a setting somewhere in the "global" arena of CentOS that > controls whether or not "hidden" (.prefixed) files are displayed in > file lists? > Never mind - apparently if you right-click in the file list and select "show hidden files", it sticks system-wide. mhr

6 11

[CentOS] YumRepo Warning: not using ftp, http[s], or file for repos, skipping - 5 is not a valid release or hasnt been released yet
by Rudi Ahlers 26 Aug '08

26 Aug '08

Hi all Does anyone know what causes this error? I have setup a local CentOS repository, with mrepo, and can succesfully use it for updates & installation of just about anything. Yet, this error comes up. Here's my /etc/yum.conf: # PUT YOUR REPOS HERE OR IN separate files named file.repo # in /etc/yum.repos.d [base-local] name=CentOS-$releasever - Base #mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os baseurl=http://192.168.10.10/repo/centos5/$basearch/os gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 [updates-local] name=CentOS-$releasever - Updates #mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updat… baseurl=http://192.168.10.10/repo/centos5/$basearch/updates gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 [addons-local] name=CentOS-$releasever - Addons #mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons baseurl=http://192.168.10.10/repo/centos5/$basearch/addons gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 [extras-local] name=CentOS-$releasever - Addons #mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons baseurl=http://192.168.10.10/repo/centos5/$basearch/extras gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5 And when I browse to http://192.168.10.10/repo/centos5 - it looks similar to the online CentOS repositories, but only with the x86 folder. -- Kind Regards Rudi Ahlers

3 7

specialix module
by Jerry Geis 26 Aug '08

26 Aug '08

I am wondering if it is possible to just grab the specialix.c file and compile that one module (not the entire kernel) and of course load that module and have it work. Is that possible? Jerry

2 1

Slow Xen on CentOS 5.2?
by Eduardo Grosclaude 26 Aug '08

26 Aug '08

Hello, Should Xen still work on CentOS 5.2 with 1GB RAM? On my Toshiba Satellite notebook Xen performed reasonably well as of CentOS 5.0. After I updated the system, Xen takes an unusable startup time. Every task at boot, since nash is fired, seems to take increasingly longer. I can't seem to find any references to this problem. Where should I look first? Thanks in advance -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina

1 1

virt-install error: "virDomainLookupByName() failed got unknown HTTP error code 400"
by Graeme West 26 Aug '08

26 Aug '08

Hi there, I've been happily installing VMs in CentOS 5.2's Xen implementation using virt-manager. However, my latest attempt to use the install wizard in virt-manager failed when I got to the networking screen. The 'forward' button was unresponsive, and I was unable to proceed. I checked the virt-manager logs, and saw this appearing immediately after I tried to proceed: /root/.virt-manager/virt-manager.log: [Tue, 05 Aug 2008 16:16:53 virt-manager 20637] ERROR (virt-manager:132) Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/create.py", line 294, in forward if(self.validate(notebook.get_current_page()) != True): File "/usr/share/virt-manager/virtManager/create.py", line 974, in validate vm = self.connection.vmm.lookupByName(name) File "/usr/lib64/python2.4/site-packages/libvirt.py", line 646, in lookupByName if ret is None:raise libvirtError('virDomainLookupByName() failed', conn=self) libvirtError: virDomainLookupByName() failed got unknown HTTP error code 400 None There was also a lot of this in the main system log (1-2 messages per second): [Tue, 05 Aug 2008 16:16:53 virt-manager 20637] DEBUG (connection:580) Couldn't fetch domain id 3; it probably went away So I tried to use virt-install on the shell instead, but got much the same error: [root@optimus swadmin]# virt-install --hvm --name=zurich.gcal.ac.uk --ram=2048 --file=/var/lib/xen/images/zurich.gcal.ac.uk.img --vnc --vcpus=2 --cdrom=/home/swadmin/software/OpenSolaris/sol-nv-b93-x86-dvd.iso --network=bridge:xenbr0 Starting install... virDomainLookupByName() failed got unknown HTTP error code 400 Domain installation may not have been successful. If it was, you can restart your domain by running 'virsh start zurich.gcal.ac.uk'; otherwise, please restart your installation. Tue, 05 Aug 2008 17:30:18 ERROR virDomainLookupByName() failed got unknown HTTP error code 400 Traceback (most recent call last): File "/usr/bin/virt-install", line 502, in ? main() File "/usr/bin/virt-install", line 462, in main dom = guest.start_install(conscb,progresscb) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 813, in start_install return self._do_install(consolecb, meter) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 829, in _do_install self._create_devices(meter) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 727, in _create_devices nic.setup(self.conn) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 287, in setup vm = conn.lookupByName(name) File "/usr/lib64/python2.4/site-packages/libvirt.py", line 646, in lookupByName if ret is None:raise libvirtError('virDomainLookupByName() failed', conn=self) libvirtError: virDomainLookupByName() failed got unknown HTTP error code 400 It suggests I try to start the domain anyway, but it hasn't been created: [root@optimus swadmin]# virsh start zurich.gcal.ac.uk libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName error: failed to get domain 'zurich.gcal.ac.uk' Any ideas would be much appreciated. Thanks, Graeme West Glasgow Caledonian University is a registered Scottish charity, number SC021474

1 2

screen not sourcing .bashrc
by Matt Arnilo S. Baluyos (Mailing Lists) 26 Aug '08

26 Aug '08

Hi everyone, I use the "screen" command from time to time and what i would still have to figure out how to do is for it to be able to source .bashrc and read my user-defined configuration (aliases for example). I have already added the "source /root/.bashrc" line on /root/.screenrc but it doesn't seem to be working. Would anyone know how this should work? Thanks, Matt -- Stand before it and there is no beginning. Follow it and there is no end. Stay with the ancient Tao, Move with the present.

2 1

Re: [CentOS] RH's servers breached
by Scott Beardsley 26 Aug '08

26 Aug '08

> What's the point on this for us, CentOS users ? I'd like to know if CentOS has been affected by RH's compromise. Can someone please comment? AFAIK, CentOS builds from RHEL SRPMs right? So as Rui mentioned the script that RH provided is useless. They do give the version info of the compromised packages: # The signed tampered packages were: # # openssh-3.9p1-8.RHEL4.24 for i386, x86_64 architecture # openssh-3.9p1-9.el4 for i386, x86_64 architecture # openssh-4.3p2-26 for x86_64 architecture # openssh-4.3p2-26.el5 for x86_64 architecture Of course I have all of these on my local CentOS mirror right now. It would be nice to know if I'm serving compromised packages. RH doesn't mention whether the SRPMs were compromised. If they were I suspect CentOS is affected also. Thanks in advance, Scott

7 8

Re: Re: Problems with perl upgrading CentOS 5.1 to 5.2 [SOLVED?]
by ArcosCom Linux User 26 Aug '08

26 Aug '08

Taking a view into perl packages (classes) needed by spamassassin (qmail-toaster package), I saw that there are a script that install the classes using CPAN. I discovered that CPAN installed packages goes into a diferent directory that distro ones. The workaround (solution) I found is rename this directory and install the needed packages manually from rpmforge repository. All appears to be working now. The steps have been: 1) Rename /usr/lib/perl5/site_perl. 2) Update perl packages. 3) Install the needed clases as packages (from rpmforge) instead from CPAN. 4) Reinstall packages broken because they install manually any propietary perl classes into the system (vmware-server for example). Thanks to all for the help. Regards El Lun, 25 de Agosto de 2008, 6:00, Eric Shubert escribió: > Eric Shubert wrote: >> Here's a list of perl modules on an up-to-date COS5.2 toaster. I would >> try >> upgrading any packages that do not match these. >> >> You do have the proper rpmforge yum repo configured, don't you? It >> appears >> that you have some "el5.rf" packages, but there are some packages for >> which >> there are updates available. >> >> I'm not confident that this will fix your problem, but it won't hurt, >> and >> might just fix it. There's something on your system hanging around from >> a >> 2.6.9 kernel, which I think is earlier than FC5 and COS5. Strange. Might >> have picked it up with the latest upgrade? I can't imagine how, unless >> you >> had an incorrect repo configured at some point. > > (Oops - forgot the list!): > [root@doris ~]# yum list installed | grep perl > perl.i386 4:5.8.8-10.el5_2.3 installed > perl-Archive-Tar.noarch 1.38-1.el5.rf installed > perl-Compress-Raw-Zlib.i386 2.011-1.el5.rf installed > perl-Compress-Zlib.noarch 2.011-1.el5.rf installed > perl-Crypt-OpenSSL-Bignum.i386 0.04-1.el5.rf installed > perl-Crypt-OpenSSL-RSA.i386 0.25-1.el5.rf installed > perl-Crypt-PasswdMD5.noarch 1.3-1.2.el5.rf installed > perl-DBD-MySQL.i386 3.0007-1.fc6 installed > perl-DBI.i386 1.605-1.el5.rf installed > perl-Digest-HMAC.noarch 1.01-15 installed > perl-Digest-SHA.i386 5.47-1.el5.rf installed > perl-Digest-SHA1.i386 2.11-1.2.1 installed > perl-Encode-Detect.i386 1.01-1.el5.rf installed > perl-Error.noarch 0.17014-1.el5.rf installed > perl-Geography-Countries.noarch 1.4-2.2.el5.rf installed > perl-HTML-Parser.i386 3.56-1.el5.rf installed > perl-HTML-Tagset.noarch 3.20-1.el5.rf installed > perl-IO-Compress-Base.noarch 2.011-1.el5.rf installed > perl-IO-Compress-Zlib.noarch 2.011-1.el5.rf installed > perl-IO-Socket-INET6.noarch 2.54-1.el5.rf installed > perl-IO-Socket-SSL.noarch 1.13-1.el5.rf installed > perl-IO-Zlib.noarch 1.09-1.el5.rf installed > perl-IP-Country.noarch 2.24-1.el5.rf installed > perl-Mail-DKIM.noarch 0.32-1.el5.rf installed > perl-Mail-DomainKeys.noarch 1.0-1.el5.rf installed > perl-Mail-SPF.noarch 2.005-1.el5.rf installed > perl-Mail-SPF-Query.noarch 1.999.1-2.el5.rf installed > perl-MailTools.noarch 2.03-1.el5.rf installed > perl-Net-CIDR.noarch 0.11-1.2.el5.rf installed > perl-Net-CIDR-Lite.noarch 0.20-1.2.el5.rf installed > perl-Net-DNS.i386 0.63-1.el5.rf installed > perl-Net-Daemon.noarch 0.43-1.el5.rf installed > perl-Net-IP.noarch 1.25-2.fc6 installed > perl-Net-Ident.noarch 1.20-1.2.el5.rf installed > perl-Net-SSLeay.i386 1.32-1.el5.rf installed > perl-NetAddr-IP.i386 4.007-1.el5.rf installed > perl-PlRPC.noarch 0.2020-1.el5.rf installed > perl-Socket6.i386 0.20-1.el5.rf installed > perl-String-CRC32.i386 1.4-2.fc6 installed > perl-Sys-Hostname-Long.noarch 1.4-1.2.el5.rf installed > perl-TimeDate.noarch 1:1.16-5.el5 installed > perl-URI.noarch 1.35-3 installed > perl-libwww-perl.noarch 5.805-1.1.1 installed > perl-version.i386 0.74-1.el5.rf installed > > >> ArcosCom Linux User wrote: >>> Linux myhost 2.6.18-92.1.10.1.el5_ArcosComPAE #1 SMP Wed Aug 6 22:16:52 >>> CEST 2008 i686 i686 i386 GNU/Linux >>> >>> El Lun, 25 de Agosto de 2008, 0:37, Eric Shubert escribió: >>>> What does >>>> $ uname -a >>>> show you? >>>> >>>> ArcosCom Linux User wrote: >>>>> As I said in the e-mail, I reinstalled all CentOS 5.2 perl* packages >>>>> that >>>>> I had installed. >>>>> >>>>> I have no idea about perl and how to fight versus it. I only know: >>>>> 1) This system where a FC5 some years ago with no problem. >>>>> 2) I upgraded to CentOS 5 (a year ago) with no problem. >>>>> 3) I upgraded to CentOS 5.1 (some months ago) with no problem. >>>>> 4) I upgraded to CentOS 5.2 (some days ago) and I encounter this >>>>> problem. >>>>> >>>>> I think that in this process no exists any CentOS 4 packages >>>>> installed. >>>>> I >>>>> use "rpmforge" repository too (don't think this were the problem >>>>> yet). >>>>> >>>>> I remember I use CPAN to install (some months ago) 2 or three >>>>> packages >>>>> that weren't in repos. Perhaps, some help, could be how to "reinit" >>>>> the >>>>> perl configuration to original values (includes, for example). I >>>>> don't >>>>> know how to use CPAN really. >>>>> >>>>> These are the list of "*perl*" packages I have installed: >>>>> >>>>> # yum list installed | grep perl >>>>> mod_perl.i386 2.0.2-6.3.el5 >>>>> installed >>>>> newt-perl.i386 1.08-9.2.2 >>>>> installed >>>>> openssl-perl.i386 0.9.8b-10.el5 >>>>> installed >>>>> perl.i386 4:5.8.8-10.el5_2.3 >>>>> installed >>>>> perl-Archive-Tar.noarch 1.30-1.fc6 >>>>> installed >>>>> perl-Archive-Zip.noarch 1.16-1.2.1 >>>>> installed >>>>> perl-Authen-Radius.noarch 0.13-1.el5.centos >>>>> installed >>>>> perl-BSD-Resource.i386 1.28-1.fc6.1 >>>>> installed >>>>> perl-Bit-Vector.i386 6.4-2.2.2.1 >>>>> installed >>>>> perl-Carp-Clan.noarch 5.3-1.2.1 >>>>> installed >>>>> perl-Compress-Raw-Zlib.i386 2.011-1.el5.rf >>>>> installed >>>>> perl-Compress-Zlib.i386 1.42-1.fc6 >>>>> installed >>>>> perl-Convert-ASN1.noarch 0.20-1.1 >>>>> installed >>>>> perl-Crypt-Blowfish.i386 2.10-1.2.el5.rf >>>>> installed >>>>> perl-Crypt-CBC.noarch 2.24-1.el5.rf >>>>> installed >>>>> perl-Crypt-DES.i386 2.05-3.2.el5.rf >>>>> installed >>>>> perl-Crypt-OpenSSL-Bignum.i386 0.04-1.el5.rf >>>>> installed >>>>> perl-Crypt-PasswdMD5.noarch 1.3-1.2.el5.rf >>>>> installed >>>>> perl-Crypt-SSLeay.i386 0.51-11.el5 >>>>> installed >>>>> perl-DBD-MySQL.i386 3.0007-1.fc6 >>>>> installed >>>>> perl-DBD-Pg.i386 1.49-1.fc6 >>>>> installed >>>>> perl-DBI.i386 1.52-1.fc6 >>>>> installed >>>>> perl-Data-HexDump.noarch 0.02-1.el5.centos >>>>> installed >>>>> perl-Date-Calc.i386 5.4-1.2.2.1 >>>>> installed >>>>> perl-DateManip.noarch 5.44-1.2.1 >>>>> installed >>>>> perl-Digest-HMAC.noarch 1.01-15 >>>>> installed >>>>> perl-Digest-SHA1.i386 2.11-1.2.1 >>>>> installed >>>>> perl-HTML-Parser.i386 3.55-1.fc6 >>>>> installed >>>>> perl-HTML-Tagset.noarch 3.10-2.1.1 >>>>> installed >>>>> perl-IO-Compress-Base.noarch 2.011-1.el5.rf >>>>> installed >>>>> perl-IO-Compress-Zlib.noarch 2.011-1.el5.rf >>>>> installed >>>>> perl-IO-Socket-INET6.noarch 2.51-2.fc6 >>>>> installed >>>>> perl-IO-Socket-SSL.noarch 1.01-1.fc6 >>>>> installed >>>>> perl-IO-String.noarch 1.08-1.1.1 >>>>> installed >>>>> perl-IO-Zlib.noarch 1.04-4.2.1 >>>>> installed >>>>> perl-LDAP.noarch 1:0.33-3.fc6 >>>>> installed >>>>> perl-Mail-POP3Client.noarch 2.17-1.el5.centos >>>>> installed >>>>> perl-MailTools.noarch 1.77-1.el5.centos >>>>> installed >>>>> perl-Mozilla-LDAP.i386 1.5.2-4.el5 >>>>> installed >>>>> perl-NKF.i386 2.07-1.1.fc6 >>>>> installed >>>>> perl-Net-DNS.i386 0.59-3.el5 >>>>> installed >>>>> perl-Net-Daemon.noarch 0.43-1.el5.rf >>>>> installed >>>>> perl-Net-IMAP-Simple.noarch 1.17-1.el5.centos >>>>> installed >>>>> perl-Net-IMAP-Simple-SSL.noarch 1.3-1.el5.centos >>>>> installed >>>>> perl-Net-IP.noarch 1.25-2.fc6 >>>>> installed >>>>> perl-Net-SSLeay.i386 1.30-4.fc6 >>>>> installed >>>>> perl-Net-Telnet.noarch 3.03-5 >>>>> installed >>>>> perl-PlRPC.noarch 0.2020-1.el5.rf >>>>> installed >>>>> perl-SGMLSpm.noarch 1.03ii-16.2.1 >>>>> installed >>>>> perl-Socket6.i386 0.19-3.fc6 >>>>> installed >>>>> perl-String-CRC32.i386 1.4-2.fc6 >>>>> installed >>>>> perl-TimeDate.noarch 1:1.16-5.el5 >>>>> installed >>>>> perl-URI.noarch 1.35-3 >>>>> installed >>>>> perl-XML-LibXML.i386 1.58-5 >>>>> installed >>>>> perl-XML-LibXML-Common.i386 0.13-8.2.2 >>>>> installed >>>>> perl-XML-NamespaceSupport.noarch 1.09-1.2.1 >>>>> installed >>>>> perl-XML-Parser.i386 2.34-6.1.2.2.1 >>>>> installed >>>>> perl-XML-SAX.noarch 0.14-5 >>>>> installed >>>>> perl-libwww-perl.noarch 5.805-1.1.1 >>>>> installed >>>>> perl-libxml-perl.noarch 0.08-1.2.1 >>>>> installed >>>>> perl-rrdtool.i386 1.2.23-1.el5.rf >>>>> installed >>>>> perl-suidperl.i386 4:5.8.8-10.el5_2.3 >>>>> installed >>>>> perl-version.i386 0.74-1.el5.rf >>>>> installed >>>>> >>>>> Anyone could help me? Thanks!! >>>>> >>>>> El Dom, 24 de Agosto de 2008, 15:33, Matt Hyclak escribió: >>>>>> On Sun, Aug 24, 2008 at 12:29:29PM +0200, ArcosCom Linux User >>>>>> enlightened >>>>>> us: >>>>>>> I'm having problems with perl. >>>>>>> I'm receivings this e-mails from logwatch everyday and appears to >>>>>>> be a >>>>>>> problem with perl. >>>>>>> >>>>>>> I explain a bit before expose the errors that I received: I tried >>>>>>> to >>>>>>> download all perl* packages, uninstall the repeated ones and >>>>>>> reinstall >>>>>>> all >>>>>>> packages where installed. >>>>>>> >>>>>>> I need some help to try to solve this problem, because is a >>>>>>> production >>>>>>> server and I can't uninstall many working packages that depends on >>>>>>> perl* >>>>>>> ones. >>>>>>> >>>>>>> I read about similar problem in CentOS forums, with no sucess. >>>>>>> >>>>>>> Many thanks to all!!! >>>>>>> >>>>>>> Here is the report from logwatch: >>>>>>> >>>>>>> /etc/cron.daily/0logwatch: >>>>>>> >>>>>>> Errno architecture (i386-linux-thread-multi-2.6.9-42.0.3.elsmp) >>>>>>> does >>>>>>> not >>>>>>> match executable architecture >>>>>>> (i386-linux-thread-multi-2.6.18-53.1.14.el5pae) at >>>>>> It would appear you've installed el4 perl packages on an el5 system, >>>>>> or >>>>>> vice >>>>>> versa. >>>>>> >>>>>> Matt >>>>>> >>>>>> -- >>>>>> Matt Hyclak >>>>>> Systems and Operations >>>>>> Office of Information Technology >>>>>> Ohio University >>>>>> (740) 593-1222 >>>>>> _______________________________________________ >>>>>> CentOS mailing list >>>>>> CentOS(a)centos.org >>>>>> http://lists.centos.org/mailman/listinfo/centos >>>>>> >> >> > > > -- > -Eric 'shubes' > > --------------------------------------------------------------------- > QmailToaster hosted by: VR Hosted <http://www.vr.org> > --------------------------------------------------------------------- > To unsubscribe, e-mail: qmailtoaster-list-unsubscribe(a)qmailtoaster.com > For additional commands, e-mail: qmailtoaster-list-help(a)qmailtoaster.com > >

1 0

data rate on NIC card
by Gopinath Achari 26 Aug '08

26 Aug '08

hi how to check the data rate on the nic card in centos i.e, at what speed the data is transmitted and received on ethernet interface in terms of kbps or bps any command is available in centos 5.1 regards, Gopinath M

2 2

Yum corrupting RPMs
by Tom Lanyon 26 Aug '08

26 Aug '08

Hi list, Trying to upgrade someone's workstation here to 5.2 (was installed from a 5.0 DVD I think). The RPMs on our internal mirror are in-tact and pass a 'rpm -- checksig' test, yet when I run a 'yum upgrade' a large portion of them are corrupted and fail the GPG check. This seems to be isolated to yum, as downloading the RPM directly via FTP with wget or lftpget provides an RPM that *does* pass the GPG check. I have upgraded key packages to the latest version (eg. yum upgrade 'yum*') and tried again to no avail. Anyone seen this before? Thanks, Tom -- Tom Lanyon Systems Administrator NetSpot Pty Ltd

5 9

Second Xen NIC not being recognized?
by David Dyer-Bennet 25 Aug '08

25 Aug '08

I've got a Xen domU running Centos 5.2 (dom0 is also Centos 5.2) with two NICs configured. Both NICs show up in the Xen hardware details display. Looking at dmesg output from rebooting the domU, I see both eth0 and eth1 appearing there. But network configuration only knows about eth0, the one that was installed originally (eth1 was added later). There's options to create another NIC in network configuration, but "xen virtual ethernet" isn't one of the hardware types I can choose, and choosing the default doesn't give me anything that works. Should I try reinstalling the domU with the NIC already in place? But even if that works -- shouldn't it be possible to add a piece of hardware to a system and have it recognized on reboot? -- David Dyer-Bennet, dd-b(a)dd-b.net; http://dd-b.net/ Snapshots: http://dd-b.net/dd-b/SnapshotAlbum/data/ Photos: http://dd-b.net/photography/gallery/ Dragaera: http://dragaera.info

2 6

OT: Google Earth, v.4.3.7284.3916 (beta) on CentOS 5.2 (32 bit)
by Lanny Marcus 25 Aug '08

25 Aug '08

The version of Google Earth I installed last December was working great this morning. Then, I decided to update to the latest version and when I tried to do that with yum, I didn't have the right name for the package (now, I think it may be "google-earth"), so I downloaded the file (GoogleEarthLinux.bin) and installed with "sh GoogleEarthLinux.bin" The latest version is now installed and I can launch it, without any problem, but, it does not seem to work......... :-) Does anyone have this version of Google Earth working properly on CentOS 5.2 (32 bit)? If so, did you need to do something extra, to get it to work? TIA! Lanny Google Earth 4.3.7284.3916 (beta) Build Date Jul 8 2008 Build Time 18:49:58 Renderer OpenGL Operating System Linux (2.6.18.1) Video Driver Tungsten Graphics, Inc Max Texture Size 2048x2048

6 18

Re: CentOS 5.2 + SELinux + Apache/PHP + Postfix
by Art Age Software 25 Aug '08

25 Aug '08

Thanks - appreciate the info. Still, I would like to understand why these denials are occurring during what should be a pretty typical use case: namely sending emails from a web app. Does anyone have any insight into this? >If these denials do not interfere with the normal workflow >of the application you may add dontaudit rules to your local policy. >The unnecessary access will still be denied but you won't get >these annoying messages in the logs. > >There's a plenty of dontaudit rules in the base policy >shipped with centos. If you're curious you may install >/usr/share/selinux/targeted/enableaudit.pp >which is a base policy with dontaudit rules turned off.

1 0

(Global/Any) setting for "show hidden files?"
by MHR 25 Aug '08

25 Aug '08

Is there a setting somewhere in the "global" arena of CentOS that controls whether or not "hidden" (.prefixed) files are displayed in file lists? I've noticed that, at home, primarily, when I use any file access dialogue window, particularly in OOo and Evolution, all my "hidden" files are shown along with the "normal" ones. (This used to be true in SeaMonkey also, but there's a way to configure that out and I've activated that, or I'd be seeing them there, too.) I made mention of this on the OOo users list and it was suggested that there might be a "higher" level control involved, but they didn't know what. I occasionally turn on the "View hidden files" option in nautilus, but I always return it to the default (off) setting because, in general, I neither want nor need to see them, which is at least one of the main reasons why _I_ "hide" them, and many are hidden by default. I thought that it might be something to do with installing the 2.4.1 version of OOo with the nautilus option turned on, which I don't know whether I did or not, but that wouldn't affect Evolution as well. Any ideas? Thanks. mhr

1 0

LVM not removing LV
by Mag Gam 25 Aug '08

25 Aug '08

I am using RHEL 5.1 with custom kernel. I have a LV I am trying to remove and its keep complaining its open. I have unmounted the filesystem, lsof shows nothing, fuser shows nothing. I am certain a reboot will fix it, but I don't know why this occurs. Can anyone shed some light on this? Are there some other LVM hacks I can use for this? TIA

4 9

syslinux and isolinux
by Jerry Geis 25 Aug '08

25 Aug '08

Hi I copied the centos 5.2 x86_64 DVD to a USB pen drive formatted for FAT32. I then ran syslinux -sf /dev/sdc1 to get it to boot. I mounted it, and did cp isolinux/vmlinuz . cp isolinux/isolinux.cfg syslinux.cfg the setup the MBR. THe device booted but I got an error message about unknown command in the syslinux.cfg file. Isnt syslinux and isolinux compatible - they are in the same package? All these commands below look correct. Did I do something wrong trying to get a USB pen drive to boot to install linux from. Jerry ---------- default linux prompt 1 timeout 600 display boot.msg F1 boot.msg F2 options.msg F3 general.msg F4 param.msg F5 rescue.msg label linux kernel vmlinuz append initrd=initrd.img label text kernel vmlinuz append initrd=initrd.img text label ks kernel vmlinuz append ks initrd=initrd.img label local localboot 1 label memtest86 kernel memtest append -

1 0

CentOS-announce Digest, Vol 42, Issue 8
by centos-announce-request＠centos.org 25 Aug '08

25 Aug '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0836-02: Moderate CentOS 2 i386 libxml2 security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Aug 2008 11:21:18 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2008:0836-02: Moderate CentOS 2 i386 libxml2 security update To: centos-announce(a)centos.org Message-ID: <48B2090E.1050703(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2008:0836-02 Moderate: libxml2 security update Files available: libxml2-2.4.19-9.ent.i386.rpm libxml2-devel-2.4.19-9.ent.i386.rpm libxml2-python-2.4.19-9.ent.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 42, Issue 8 **********************************************

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss