- Discuss - lists.centos.org

Cluster RPM Installation Failed
by Balaji 09 Jun '08

09 Jun '08

Dear All, I am new Itanium server Installation and I have installed all the CentOS4.4 ia64 CDs and I have try to install cluster suite package and i am getting the following error messages like warning: ccs-1.0.7-0.x86_64.rpm: V3 DSA signature: NOKEY, key ID 443e1821 error: Failed dependencies: libc.so.6()(64bit) is needed by ccs-1.0.7-0.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by ccs-1.0.7-0.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by ccs-1.0.7-0.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by ccs-1.0.7-0.x86_64 libm.so.6()(64bit) is needed by ccs-1.0.7-0.x86_64 libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by ccs-1.0.7-0.x86_64 Can some one throw light on this. Regards -S.Balaji

2 1

Re: [CentOS] Slow gfs performance
by James Thompson 09 Jun '08

09 Jun '08

You don't mention it but I assume you are running on Fiber Channel not iSCSI? I am running GFS using CentOS 5.1 from two servers using iSCSI. I have Device Mapper Multipath setup so that makes my performance characteristics a little different but I have tuned the servers with the following commands: gfs_tool settune <mountpoint> demotes_secs 600 gfs_tool settune <mountpoint> scand_secs 10 gfs_tool settune <mountpoint> statfs_slots 128 The first two I have set until 5.2 drops which will contain an additional GFS tuning parameter, glock_purge. Update 5 of CentOS 4 may already have the glock_purge parameter available. Run the command 'gfs_tool gettune <mountpoint>' and see if glock_purge is listed. It should be set to zero by default. If it is there you can refer to this brief write up on tuning with glock_purge since you will not want to use the demote_secs and scand_secs settings I am using: http://open-sharedroot.org/Members/marc/blog/blog-on-gfs/glock-trimming-pat… Also, as a further note, your particular usage scenario will dictate what tunings are appropriate. I am not familiar with Oracle's usage of I/O but will both servers be accessing the same data on disk (particularly with regards to writing) at the same time? -James Thompson ----- Original Message ----- From: "lingu" <hicheerup(a)gmail.com> To: centos(a)centos.org Sent: Monday, June 9, 2008 4:54:44 AM GMT -05:00 US/Canada Eastern Subject: [CentOS] Slow gfs performance HI, Sorry for repeating same mail ,while composing that mail i mistakenly typed the send button.I am facing problem with my gfs and below is the running setup. My setup Two node Cluster[only to create shared gfs file system] with manual fencing running on centos 4 update 5 for oracle apps. Shared gfs partition are mounted on both the node[active-active] Whenever i type df -h command it will take some delay to print my shared gfs partition,it is happening even if i continuously typing df -h command . Shared GFS file system storage is from IBM STORAGE.I don't know what parameter to be fine tuned,bcoz of that may be i feel my oracle apps is also very slow. In syslog i am getting following error continuously in one of the node less /var/log/messages test2 kernel: 493 [RAIDarray.mpp]AHA-SN01:1:0:10 Cmnd failed-retry the same path. vcmnd SN 7147770 pdev H2:C0: T0:L10 0x00/0x00/0x00 0x00020000 mpp_status:2 Any one help me to get rid of this slow gfs performance. Regards lingu _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

wpa_supplicant and machine freezes
by Timothy Kesten 09 Jun '08

09 Jun '08

Hi Folks, I'd like to install my USB-WLAN-Stick Netgear WG111v3. Ndiswrapper works correct after installing Kernel-Modules from atrpm ndiswrapper-kmdl-2.6.18-53.1.19.el5.centos.plus-1.52-16.el5.i686.rpm. But by calling wpa_supplicant with wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d machine freezes. My wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=1 network={ ssid="MyNet" scan_ssid=1 proto=WPA key_mgmt=WPA-PSK pairwise=TKIP group=TKIP #psk="MyPSK" psk=9050ec6fe020b1738fce16c93c33b3809b9e62d5e6bf955518076eb2d7263 } With this configuration it works correct with Sidux (a debian clone). But with CentOS 5.1 ....??? No hints in /var/log/messages or dmesg available. Has somebody an advice/ a solution for me? More information needed? Thx Timothy

2 1

RE
by Pro Green European 09 Jun '08

09 Jun '08

> Maybe if you trust DNS resolution names to make the connection to the > Database servers could be a problem. Did you try to use IP addresses > directly in the code? > Yes, I have tried that too, no difference. I've even tried running MySQL with a database populated with identical data on localhost (even tried 127.0.0.1), but there is no difference in performance. Delays in the connection to the db server is still around 20-30 seconds. So, the problem has to be with either the php-mysql module, PHP itself, MySQL or then it may be hardware related. Thx, /mysteron

1 0

[CentOS] Network problems on new CentOS 5 install on P35, ICH9R mobo
by Dick Roth 09 Jun '08

09 Jun '08

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my swap! Particulars: mobo=Gigabyte P35-DS3R SATA Controller=AHCI PATA Controller=JMicron 20360 new drive=ATA WDC WD1600AAJS-2 old drive=WDC WD400JB-00JJA0 DVD-RW=Pioneer DVR-112D (PATA) NICs=eth0=Realtek RTL-8029(AS) (DHCP) eth1=Realtek RTL-8029(AS) (Static) Has anyone seen this? Will 5.2 help with this situation? Been working on this for days! Thanks, Dick -- "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin 1775

4 5

DMA mode
by David Mackintosh 09 Jun '08

09 Jun '08

Hi folks, I have an HP Proliant 140DL G2 server with what appears to be an IDE drive in non-DMA mode. Performance on the server is extremely bad when large amounts of disk activity is taking place. I think the problem is that my drive is not in DMA mode: # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 80026361856, start = 0 ...but I can't set it on: # hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) ...which I think is because the IDE controller isn't really recognized, or is pretending to be a SATA controller: # lspci -v | less 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company: Unknown device 3208 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 193 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 1470 [size=16] All the google hits I've seen so far imply I have to build a kernel module but I'd rather not get into the business of rolling my own kernel if I don't have to. I spun through the HP support page for this box/OS combo, and I don't see any SATA/IDE/ATA drivers, only SCSI/SAS drivers. So before I continue on, can I get a sanity check here -- am I barking up the right tree? -- /\oo/\ / /()\ \ David Mackintosh | dave(a)xdroop.com | http://www.xdroop.com

4 6

EXT3 error message on CENTOS 3.4
by mcclnx mcc 09 Jun '08

09 Jun '08

We have DELL 2650 with CENTOS 3.4 installed. Today I saw following messages on /var/log/messages. Anyone know what it mean? Does it point to which disk? =================================== Jun 4 06:58:40 ORA03 kernel: EXT3-fs unexpected failure: (((jh2bh(jh))->b_state & (1UL << BH_Uptodate)) != 0); Jun 4 06:58:40 ORA03 kernel: Possible IO failure. Jun 4 06:58:40 ORA03 kernel: Jun 4 06:58:45 ORA03 kernel: EXT3-fs unexpected failure: (((jh2bh(jh))->b_state & (1UL << BH_Uptodate)) != 0); Jun 4 06:58:45 ORA03 kernel: Possible IO failure. Jun 4 06:58:45 ORA03 kernel: Jun 4 06:58:50 ORA03 kernel: EXT3-fs unexpected failure: (((jh2bh(jh))->b_state & (1UL << BH_Uptodate)) != 0); Jun 4 06:58:50 ORA03 kernel: Possible IO failure. Jun 4 06:58:50 ORA03 kernel: 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ - 馬上體驗！

17 17

Slow gfs performance
by lingu 09 Jun '08

09 Jun '08

HI, Sorry for repeating same mail ,while composing that mail i mistakenly typed the send button.I am facing problem with my gfs and below is the running setup. My setup Two node Cluster[only to create shared gfs file system] with manual fencing running on centos 4 update 5 for oracle apps. Shared gfs partition are mounted on both the node[active-active] Whenever i type df -h command it will take some delay to print my shared gfs partition,it is happening even if i continuously typing df -h command . Shared GFS file system storage is from IBM STORAGE.I don't know what parameter to be fine tuned,bcoz of that may be i feel my oracle apps is also very slow. In syslog i am getting following error continuously in one of the node less /var/log/messages test2 kernel: 493 [RAIDarray.mpp]AHA-SN01:1:0:10 Cmnd failed-retry the same path. vcmnd SN 7147770 pdev H2:C0: T0:L10 0x00/0x00/0x00 0x00020000 mpp_status:2 Any one help me to get rid of this slow gfs performance. Regards lingu

1 0

GFS slow on centos4.5
by whoami i 09 Jun '08

09 Jun '08

HI, My setup Two node Cluster[only to create shared gfs file system] with manual fencing running on centos 4 update 5 for oracle apps. Shared gfs partiton are mounted on both the node[active-active] Whenever i type df -h command it will take some delay to print my shared gfs partiton,it is happening even if i continiosly typing df -h command. Shared GFS file system storage is from IBM STORAGE.

1 0

3Ware 9690SA
by Ruslan Sivak 09 Jun '08

09 Jun '08

I successfully installed CentOS on 3ware 9650SE controller. Due to some issues with compatibility with my motherboard, I replaced it with a 9690SA. Now the system won't boot (although interestingly enough, it find the boot menu fine, just won't boot past a certain point in the bootup phase. I thought I would reinstall, but anaconda doesn't find the raid array. 3ware does have drivers on their site, but I'm not too sure how to get them on my system? Russ

8 15

Web proxy/content filter w/ AD integration
by Joseph L. Casale 09 Jun '08

09 Jun '08

I need to setup a proxy that does transparent auth to AD, does anyone have experience or suggestions for a setup that will run in CentOS? I came across an article on integrating Squid with Windows AD for auth but it doesn't auth transparently (is that even possible?). Thanks! jlc

4 4

what modules are needed in initrd to boot from USB thumb drive
by Jerry Geis 09 Jun '08

09 Jun '08

Hi, What modules are needed in my mkinird command with --preload to boot from usb thumbdrive? THanks, Jerry

2 1

swdtp -sv?
by jarmo 08 Jun '08

08 Jun '08

Looking with Wireshark I see localhost going through ports sending swdtp -sv > some port. What causes this action? CentOs 5.1 desktop KDE. Any ideas? Jarmo

2 1

CentOS-announce Digest, Vol 40, Issue 4
by centos-announce-request＠centos.org 08 Jun '08

08 Jun '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0498 Moderate CentOS 4 i386 cups - security update (Johnny Hughes) 2. CESA-2008:0498 Moderate CentOS 4 x86_64 cups - security update (Johnny Hughes) 3. CESA-2008:0515 Important CentOS 4 x86_64 evolution28 - security update (Johnny Hughes) 4. CESA-2008:0515 Important CentOS 4 i386 evolution28 - security update (Johnny Hughes) 5. CESA-2008:0516 Critical CentOS 4 x86_64 evolution - security update (Johnny Hughes) 6. CESA-2008:0516 Critical CentOS 4 i386 evolution - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 07 Jun 2008 20:25:43 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2008:0498 Moderate CentOS 4 i386 cups - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <484B3517.2020709(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Security Advisory 2008:0498 https://rhn.redhat.com/errata/RHSA-2008-0498.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: cups-1.1.22-0.rc1.9.20.2.el4_6.8.i386.rpm cups-devel-1.1.22-0.rc1.9.20.2.el4_6.8.i386.rpm cups-libs-1.1.22-0.rc1.9.20.2.el4_6.8.i386.rpm src: cups-1.1.22-0.rc1.9.20.2.el4_6.8.src.rpm

1 0

EVMS?
by drew einhorn 08 Jun '08

08 Jun '08

EVMS Enterprise Volume Management System sounds interesting, looks like it supported CentOS4, but not CentOS5. But maybe I'm not looking in the right places. -- Drew Einhorn

2 1

using /dev/hda system to build initrd for /dev/sda system
by Jerry Geis 07 Jun '08

07 Jun '08

I think I have booting issues for my custom kernel on centos 4. the sda system cannot find the disk. I used a qemu image to build a centos 4 MATH_EMULATION kernel. This system has /dev/hda. The system I am putting the vmlinuz and initrd files on is a /dev/sda system. I dont think the initrd image is getting built correctly. Does this make sense? What might I look at changing to ensure my initrd is made correctly. Jerry

2 1

Zoneminder
by Thomas Dukes 07 Jun '08

07 Jun '08

Hello, Does any one have current rpms for Zoneminder-1.23.3? I can't get the source to compile on 4.6. I've looked, googled, etc., but can't find if anyone has made one. Anyone interested in making one? Dag?? TIA

2 1

Live CD?
by MHR 07 Jun '08

07 Jun '08

I just used a Live CD for the first time today, in part to show what CentOS can do for a co-worker who is looking at using it at work and home, but I got the strangest result. We booted the CD and let the centos user log in. It took a really long time to load the desktop and there were no panels, so the only things we could do were browse the computer, CD, home, file system, keyboard (sort of) and pretty much nothing else. <alt><f2> and <alt><f1> did nothing, either - no menu, no input windows - nada. Is that normal? If not, what did I/we overlook? I was expecting a lot more, and from looking around the wiki, there should have been, but I couldn't find a good reference for what the Live CD is supposed to be able to do or let a user do. Thanks. mhr

9 16

SELinux error message on CentOS 5: "multiple same specifications"
by Filipe Brandenburger 07 Jun '08

07 Jun '08

Hi all, I just installed a CentOS 5 machine from Kickstart. I configure NSS and PAM to lookup and authenticate users from LDAP with authconfig. On my LDAP I also have some automount configuration, but I'm not running automount on this server. SELinux is installed and enforcing. Whenever I try to install an RPM (and in other occasions during boot) I see those messages: # rpm -Uvh ... .rpm /etc/selinux/targeted/contexts/files/file_contexts: Multiple same specifications for /usr/local/lost\+found/.*. /etc/selinux/targeted/contexts/files/file_contexts: Multiple same specifications for /usr/local/\.journal. /etc/selinux/targeted/contexts/files/file_contexts: Multiple same specifications for /usr/local/lost\+found. The RPM installs fine, I guess those are just warnings. (Actually, /usr/local is practically empty, and there are no lost+found or .journal there, so I guess those are really innocuous.) I dug in deeper and I found out that the source of the problem is most probably in this file: /etc/selinux/targeted/contexts/files/file_contexts.homedirs Among its contents are these lines: /usr/local/[^/]*/.+ user_u:object_r:user_home_t:s0 /usr/local/[^/]*/.*/plugins/nprhapengine\.so.* -- user_u:object_r:textrel_shlib_t:s0 /usr/local/[^/]*/.*/plugins/libflashplayer\.so.* -- user_u:object_r:textrel_shlib_t:s0 /usr/local/[^/]*/((www)|(web)|(public_html))(/.+)? user_u:object_r:httpd_user_content_t:s0 /usr/local/[^/]*/\.mozilla(/.*)?/plugins/libflashplayer\.so.* -- user_u:object_r:textrel_shlib_t:s0 /usr/local/[^/]* -d user_u:object_r:user_home_dir_t:s0 /usr/local/lost\+found/.* <<none>> /usr/local -d system_u:object_r:home_root_t:s0 /usr/local/\.journal <<none>> /usr/local/lost\+found -d system_u:object_r:lost_found_t:s0 I saw that /home and /root are there, since they are really home directories. But /usr/local shouldn't be there! And there's a fourth directory there, which is based on the name of our NFS fileserver: /colossus/users/[^/]*/.+ user_u:object_r:user_home_t:s0 /colossus/users/[^/]*/.*/plugins/nprhapengine\.so.* -- user_u:object_r:textrel_shlib_t:s0 /colossus/users/[^/]*/.*/plugins/libflashplayer\.so.* -- user_u:object_r:textrel_shlib_t:s0 /colossus/users/[^/]*/((www)|(web)|(public_html))(/.+)? user_u:object_r:httpd_user_content_t:s0 /colossus/users/[^/]*/\.mozilla(/.*)?/plugins/libflashplayer\.so.* -- user_u:object_r:textrel_shlib_t:s0 /colossus/users/[^/]* -d user_u:object_r:user_home_dir_t:s0 /colossus/users/lost\+found/.* <<none>> /colossus/users -d system_u:object_r:home_root_t:s0 /colossus/users/\.journal <<none>> /colossus/users/lost\+found -d system_u:object_r:lost_found_t:s0 I tried to edit the file to remove the offending entries, but after I installed another RPM I saw that the file was regenerated with the other entries. So, I would like to know: Where is this coming from? How is this file being generated? What's the command that generates it? Which command (semanage?) apart from rpm can I use to reproduce and test the problem? (In other words, another command that won't install or change anything on the system but check the integrity of this file.) How can I tweak or control the way this file is generated? Thanks a lot! Filipe

1 1

Frequent Gnome Terminal crashes in CentOS 5.1
by Alfred von Campe 07 Jun '08

07 Jun '08

Ever since I upgraded all my systems to CentOS 5.1 I have been getting reports from users about "all their windows disappearing". A little digging revealed that they meant all gnome-terminal windows. Since there is only one gnome-terminal process by default for all your open terminal windows and tabs, a crash of that process means losing all your terminal windows. These crashes often (but not always) occur over night when the system is otherwise idle. A quick Google search found a problem on Ubuntu related to VTE (the terminal emulator widget used by gnome-terminal) but not much else of interest. Has anyone on this list experienced this? I find it hard to believe I'm the only one. I never saw this issue while running CentOS 4.X on these systems... Alfred

6 12

5.1 Anaconda Install Error
by Kirk Bocek 07 Jun '08

07 Jun '08

I'm unable to install x86_64 on a host. The installer gets through the first part, asking for install type and it begins loading the images from whatever media was selected. Then anaconda spills a series of cryptic messages ending in 'file not found' and the console on F2 is locked up. I've tried this with physical DVD media, PXE-HTTP and media-boot HTTP install. It happens every time. This is a reinstall to this host. The weird thing is that I was able to install to this host from this media previously. I've seen the note at bugs.centos.org regarding an incorrect .discinfo file but that doesn't seem to be it. The .diskinfo file: 1195929648.203590 Final x86_64 1,2,3,4,5,6,7 CentOS/base /home/buildcentos/CENTOS/5.1/en/x86_64/CentOS CentOS/pixmaps Does anyone have any idea what's going on? Kirk Bocek

6 11

Samba AD valid users issue
by mslist＠opcenter.net 07 Jun '08

07 Jun '08

Thanks, The issue dos not seem to be with the separator. It is with the @ as a leading char in the group name. But I will give it a try on Monday Michel van Deventer michel at van.deventer.cx Fri Jun 6 21:34:23 UTC 2008 Having a quick glance at the config I remember I had a sort of same issue, set your winbind seperator character to something like '#' and do the same in the valid users and groups and it should give you more working stuff ;) The \ character is a line break which tells samba to continue reading the config on the next line including spaces and linebreaks...

1 0

Samba AD valid users issue
by mslist＠opcenter.net 07 Jun '08

07 Jun '08

I have setup a new server centos 5.1 server as a storage server with over 7TB of storage. The server has been integrated into a large Active Directory network there are 5 primary AD servers and a large number of local AD server at each location (over 20). There are also over 15 trusted domains hundreds of groups and thousands of users. It has been quite a challenge to integrate the Linux server with Samba into this incitement. I am now at a point where I can change user and group ownership of filed and folders at AD users and connect to the server with a windows client. There are also issues with Samba not starting on bootup (yes the service is set to start at level 3 system starts non GUI). And it seems to take quite a while for system to recognize domain users on startup. The [TEST] share works with out issue. The [TEST-ENG] share is not working no matter what I do. The issue that I am having is that most of the groups have a @ at the beginning. Ie: @DIV-Engineering This conflicts with the Samba valid users = directive in the smb.conf. I have been able to change the group ownership to @DIV-Engineering in the file-system without any issues. Is there any way to do this? [global] workgroup = XXX realm = XXX server string = Samba Server Version %v security = ADS auth methods = guest, sam, winbind obey pam restrictions = Yes password server = nycbcc01.xxx.ad.xxx.net # winbind separator = \\ # passdb backend = tdbsam wins server = 192.20.76.98 ldap ssl = no winbind use default domain = yes idmap uid = 10000-100000 idmap gid = 10000-100000 winbind enum users = Yes preferred master = no encrypt passwords = yes template homedir = /home/samba/%D/%U cups options = raw [homes] comment = Home Directories read only = No browseable = No [printers] comment = All Printers path = /var/spool/samba printable = Yes browseable = No [TEST] path = /home/samba/shares/TEST valid users = @"XXX\Domain Users" force group = "XXX\domain users" read only = No create mask = 0774 force create mode = 0775 directory mask = 0775 force directory mode = 0770 force directory security mode = 0770 [TEST-ENG] path = /home/samba/shares/TEST valid users = @"XXX\@DIV-Engineering" force group = "XXX\@DIV-Engineering" read only = No create mask = 0774 force create mode = 0775 directory mask = 0775 force directory mode = 0770 force directory security mode = 0770

2 1

usb thumbdrive
by Jerry Geis 07 Jun '08

07 Jun '08

Hi all, I am soo close. I have have made my custom kernel from a DIFFERENT machine, I have hte USB booting, I have 3 partitions, 1-fat12, 2 - ext3, 3 is swap. on booting it says: VFS cannot open root device NULL please append root= I tried root=/dev/sda2 and still nothing. Is there something about building a kernel on one machine and then taking that to another machine with different disk structure and it not booting??? What do you do in that case? I think - hope - this is my last step to get past... jerry

3 4

vsftpd and active mode connections causes FTP session to hang
by Timothy Selivanow 07 Jun '08

07 Jun '08

I've encountered an odd error state that I haven't been able to resolve yet. I have a customer that, for what ever reason, wants to use active mode occasionally for FTP xfers. What they have noticed, is that after you switch to active, and issue a command (they do 'ls', I've done other things like 'put' and 'get', etc.), the connection hangs. If you wait a bit it returns with a "425 Failed to establish connection". I've tried this on three hosts so far (all CentOS 5) and they all behave the same, some of which there is effectively no firewall (all traffic is allowed from my workstation to the host, and no restrictions on exiting traffic). All google searches about this behavour thus far have talked about old versions of vsftpd or using filesystems such as FAT, which don't apply in all cases. Any ideas? --Tim ____________________________________________________________ / bureaucracy, n: \ \ A method for transforming energy into solid waste. / ------------------------------------------------------------ \ \ \ \ /\ ( ) .( o ).

4 5

usb thumbdrive
by Jerry Geis 07 Jun '08

07 Jun '08

I have a bootable usb thumbdrive now... three partions, msdos for syslinux booting, ext3 and swap. How can I grab my QEMU installed centos 4 image and put it on the ext3 /dev/sdc2 partition on my thumbdrive? THanks, Jerry

2 2

Re: Re: [CentOS] Dell 1950 Perc 6/i with centos 4.5
by Steve Moccio 07 Jun '08

07 Jun '08

Yes, Thanks. What I forgot to mention was that I need to run CentOS 4.5 and not CentOS 4.6 if at all possible. ---- On Fri, 6 Jun 2008, nate (centos(a)linuxpowered.net) wrote: Tim Verhoeven wrote: > Well, if RHEL 4U6 is supported, then just use CentOS 4.6 instead of > 4.5 and the install will work. Yes this is the case..and if for some reason you need more evidence: [root@me ~]# lspci -v | grep -i perc Subsystem: Dell PERC 6/i Integrated RAID Controller [root@me ~]# cat /etc/redhat-release CentOS release 4.6 (Final) [root@me ~]# dmidecode | grep -i 1950 Product Name: PowerEdge 1950 nate _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

3 3

Dell 1950 Perc 6/i with centos 4.5
by Stephen Moccio 07 Jun '08

07 Jun '08

We are currently running CentOS 4.5 on older Dell Systems. We are upgrading to Dell PowerEdge 1950 with a PERC 6/i raid controller. CentOS 4.5 installation does not see the PERC 6/i controller. Dell and LSI Logic only support RHEL 4U6 and higher and SuSe. I've tried building the boot images with the new driver for installation but kickstart still doesn't see the raid controller. I've also used the DRIVERDISK directive within kickstart but that didn't work either. Has anyone else experienced this? Anyone have any suggestions on what I might try next? Appreciate any help. Thanks, Steve Moccio uReach Technologies

4 3

INN with auth hook
by David Hláčik 06 Jun '08

06 Jun '08

Hello, i am looking for someone who is using INN news server with python_auth hook . Thanks!

1 0

enter run level
by Jerry Geis 06 Jun '08

06 Jun '08

I have a centos 4 x86_64 machine that has been working fine. It has software RAID-1. Now when it boots I get the GRUB screen, I get the very first screen about loading Init then I get a prompt about: Enter Run Level: When I enter 3 nothing happens... This is obviously not a normal boot situation. First question: Why this prompt? Second question: since it is software raid do I run e2fsck /dev/sda1 then e2fsck /dev/sdb1? I am booted presently into linux rescue mode. Seems like /dev/md0 is not know in linux rescue... I presume the file system is messed up so I was wanting to run e2fsck. It is an ext3 system. Thanks, Jerry

1 1

CentOS-announce Digest, Vol 40, Issue 3
by centos-announce-request＠centos.org 06 Jun '08

06 Jun '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0498 Moderate CentOS 3 i386 cups - security update (Tru Huynh) 2. CESA-2008:0498 Moderate CentOS 3 x86_64 cups - security update (Tru Huynh) 3. CESA-2008:0516 Critical CentOS 3 i386 evolution - security update (Tru Huynh) 4. CESA-2008:0516 Critical CentOS 3 x86_64 evolution - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 5 Jun 2008 15:56:45 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2008:0498 Moderate CentOS 3 i386 cups - security update To: centos-announce(a)centos.org Message-ID: <20080605135645.GA5018(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2008:0498 cups security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2008-0498.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/cups-1.1.17-13.3.53.i386.rpm updates/i386/RPMS/cups-devel-1.1.17-13.3.53.i386.rpm updates/i386/RPMS/cups-libs-1.1.17-13.3.53.i386.rpm source: updates/SRPMS/cups-1.1.17-13.3.53.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update cups Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

kernels and irc
by James Bunnell 06 Jun '08

06 Jun '08

I was in the #centos-social channel and simply stated that I noticed CentOS 3-4 were getting a lot of updates. I also stated that the CentOS 5 was one kernel behind, as in RHEL it is at -53, the gentlemen then told me that I was wrong and it was at -21. I then asked if there was a way to get a progress report somehow on 5.2, and that 5.2 has already upgraded that kernel. The result was that I was banned for being correct. I dont understand this kind of support.

14 39

firewalled NFS
by Jordi Prats 06 Jun '08

06 Jun '08

Hi, I'm trying to setup a firewalled NFS server. I've configured my server (CentOS 5) using the following parameters /etc/sysconfig/nfs MOUNTD_NFS_V1="no" MOUNTD_NFS_V2="no" RQUOTAD_PORT=875 LOCKD_TCPPORT=32803 LOCKD_UDPPORT=32769 RPCNFSDCOUNT=64 MOUNTD_PORT=892 STATD_PORT=662 STATD_OUTGOING_PORT=2020 SECURE_NFS="yes" modprobe.conf: options lockd nlm_udpport=4001 nlm_tcpport=4001 But it does not mount it: # mount 172.20.0.150:/tmp/ /mnt/tmp/ mount: mount to NFS server '172.20.0.150' failed: timed out (giving up). There's anything else I must setup to use fixed ports ? Thanks, -- Jordi

4 5

isolinux on a pendrive from disk 1
by Jerry Geis 06 Jun '08

06 Jun '08

Hi I just grabbed an 8gig thumb drive, took disk 1 centos 4 i386, copied the isolinux directory files to my thumbdrive, then ran syslinux -sf /dev/sdc1 on the device plugged it into my laptop and it does not boot. Is there a step(s) I am missing to get a bootable thumbdrive with centos? Thanks, Jerry

5 9

OT - colors in window change - sometimes....
by MHR 06 Jun '08

06 Jun '08

One of our Windows machines here has this interesting property that I could not duplicate in Linux (F8, but I'll check it later at home from C5.1, too). If I open a DOS window, set the properties to have a white background with dark blue font, telnet to another machine, and run some commands, sometimes the commands echo in gray on black (and stay that way). For example, the default ls (which has the color=tty option set), does this, but only with what it prints to the screen. The real killer is vi, which resets the whole screen background back to black with colored fonts, some of which are really hard to read (like dark blue on black - egad!). When I log out, the DOS window resets, but only what it prints, unless I clear the screen, which "fixes" it. Does anyone know anything about this? Seems really strange (like most WinDO$ weirdness). NEVER happens on my Linux box, but it does happen through rdesktop.... Thanks. mhr

1 0

kernel compile for i586
by Jerry Geis 06 Jun '08

06 Jun '08

I created a i586 install image with qemu. I downloaded the SRPMS package for the kernel and installed it. I cd /usr/src/redhat/SPECS rpmbuild -bp --target i586 kernelXXX.spec I does a bunch of things but it did not build a new kernel and put it in /boot I think I am missing a command to actually BUILD the kernel. What is it? Thanks, Jerry

5 6

tcp_tw_recycle / tcp_tw_reuse
by nate 06 Jun '08

06 Jun '08

Anyone have experience with these kernel parameters? I can't find a whole lot of info on them. I have a situation where I'm trying to stress test a server, dual proc quad core with a tomcat application that is really fast. We can get it to about 60% CPU usage, and processing about 1,350 requests a second but we can't get much past that. It seems we are maxing out the sockets on the system, with more than 60,000 connections in TIME_WAIT. Our requests are really small and light and short lived. So I was thinking of using these parameters to get more out of the tcp stack. Our load balancer is configured to terminate connections to the world after 25 seconds(a typical request takes 0.1 seconds to complete), but I'm not sure if that applies to the systems behind the load balancer as well(I suspect not because there's no apparent setting for that). Currently I have the system configured to take a lower amount of traffic, hovering at around 47% CPU, at around 833 req/s and it has 43k connections in these states: #### state ------------------ 65 CLOSING 94 ESTABLISHED 172 FIN_WAIT1 50 FIN_WAIT2 10 LAST_ACK 497 SYN_RECV 43480 TIME_WAIT On a side note, the 'active tcp sockets' reported by sar seems wildly inaccurate, it reports only ~10 active tcp sockets, it barely varies from the system being idle to the system being maxxed out. The docs I can find says seek expert assistance..any experts reading this ? Running CentOS 4.6 thanks nate

1 0

Re: several servers
by roberto.barrientos＠umag.cl 06 Jun '08

06 Jun '08

ok..i can install dovecot+postfix+MYSQL..etc..and maybe the problem it's resolve. i don't have problem with the machines, the machines are goods, my problem is the tranparent receive e-mails to the users than are distributed in four machines with the same number the users and different users in each. as does google??. they have one entry to e-mail system (gmail.com) but they have several machine (maybe thousands) in transparent mode. i read something like LVS...some comment about this software..! is my solution or I'm lost? Roberto.- -- Roberto Barrientos Molina Administración TIC 207153-207140-207109 UMAG NOTA: Los acentos han sido omitidos intencionalmente.-

3 2

rpm -q versus what's installed
by Scott R. Ehrlich 06 Jun '08

06 Jun '08

I am trying to install Oracle client 10g (10.2.0) on a 64-bit CentOS 5.0 system. 'rpm -q make gcc glibc etc' reveals some packages as "not installed", yet a yum install <package name> consistently returns Nothing to do. Yum list available <package name> yields nothing needed. If rpm -q <list of packages> lists some that are "not installed" but every variant of yum install and yum list I've tried and googled claiims nothing more needs to be installed, either the OS is misreporting (I doubt that) or I'm missing something that is not easily being revealed, or that I haven't used in a long time and outright forgetting. I still need (per rpm -q): compat-gcc compat-gcc-c++ compat-libstsdc++-devel openmotif21 gnome-libs There has been a suggestion of the version of Oracle (32 or 64 bit) I'm trying to install, but after thinking about it, I believe this question is a more fundamental operating system issue. Thanks for any insight. Scott

5 4

centos 4 on ebox 2300sx
by Jerry Geis 06 Jun '08

06 Jun '08

hi all, I am attempting to install centos 4.4 on an ebox 2300sx. I start with "i586 text" everything starts up and then I get: No coprocessor found and no math emulation present. How do I get math emulation? THanks Jerry

3 5

tzdata, Greenwich zone: URGENT!
by Guy Boisvert 05 Jun '08

05 Jun '08

Hi! It appears that there have been some changes to tzdata recently. We run an application that needs the server to stay at GMT. Previously, we used the Casablanca timezone but now there seems to be a 1 hour difference to GMT. I checked the London zone and they seem to change time too. I tried to change the zone to GMT with system-config-date (i'm using command line remotely) but didn't find the Greenwich zone! Is there any way to fixed this ? [boig01@iode ~]$ date Tue Jun 3 14:10:21 WEST 2008 [boig01@iode ~]$ date -u Tue Jun 3 13:10:24 UTC 2008 Thanks in advance. Guy Boisvert, ing. IngTegration inc. P.S.: As i'm writing this, our application just started to desync !!! HOW CAN I ROLL BACK TZDATA ???? I Googled all over without finding any way to do it!

6 11

Mounting cifs shares by non-root users on CentOS 4.6
by James Pearson 05 Jun '08

05 Jun '08

I'm trying to set up mounting of a Windows share for non-root users via /etc/fstab on a CentOS 4.6 box - I've followed the instructions at: <http://wiki.centos.org/TipsAndTricks/WindowsShares> Using something like the /etc/fstab example given in the wiki page (with, of course, using a valid share, username and password for my set up): //winbox/getme /mnt/win cifs user,uid=500,rw,suid,username=sushi,password=yummy 0 0 When as a non-root user I do: % mount /mnt/win mount error 1 = Operation not permitted Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) Running mount as root works fine, but I can not get it to work for non-root users. Any ideas? Thanks James Pearson

6 8

CentOS-announce Digest, Vol 40, Issue 2
by centos-announce-request＠centos.org 05 Jun '08

05 Jun '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0516 Critical CentOS 4 ia64 evolution - security update (Pasi Pirhonen) 2. CESA-2008:0516 Critical CentOS 3 ia64 evolution - security update (Pasi Pirhonen) 3. CESA-2008:0498 Moderate CentOS 3 ia64 cups - security update (Pasi Pirhonen) 4. CESA-2008:0498 Moderate CentOS 4 ia64 cups - security update (Pasi Pirhonen) 5. CESA-2008:0498 Moderate CentOS 3 s390(x) cups - security update (Pasi Pirhonen) 6. CESA-2008:0498 Moderate CentOS 4 s390(x) cups - security update (Pasi Pirhonen) 7. CESA-2008:0515 Important CentOS 4 ia64 evolution28 - security update (Pasi Pirhonen) 8. CESA-2008:0516 Critical CentOS 4 s390(x) evolution - security update (Pasi Pirhonen) 9. CESA-2008:0516 Critical CentOS 3 s390(x) evolution - security update (Pasi Pirhonen) 10. CESA-2008:0515 Important CentOS 4 s390(x) evolution28 - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 4 Jun 2008 16:42:10 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0516 Critical CentOS 4 ia64 evolution - security update To: centos-announce(a)centos.org Message-ID: <20080604134210.GC22302(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0516 https://rhn.redhat.com/errata/RHSA-2008-0516.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/evolution-2.0.2-35.0.4.c4.2.ia64.rpm updates/ia64/evolution-devel-2.0.2-35.0.4.c4.2.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

centos RS232 to IP port program
by Jerry Geis 05 Jun '08

05 Jun '08

Hi all, Is there a method in centos where a program can be started that listens on a given IP port and when something connects it will transfer data from the RS232 port to the IP port. reads and writes of course. Trying not to reinvent the wheel if I dont have to... Thanks, Jerry

3 2

a anaconda test problem
by zchen 05 Jun '08

05 Jun '08

I am building a latest CentOS5 and every newest stuff is ready. All are in directory "/linux/CentOS/5-respin/os/x86_64". My OS is CentOS5 too. I want to add some other pictures during installation process, so anaconda adjustment is needed. When I run command "anaconda --test --method=http://192.168.0.3/linux/CentOS/5-respin/os/x86_64", a error message followed: Traceback (most recent call last): File "/usr/sbin/anaconda", line 702, in ? for i in os.listdir("/mnt/runtime/usr/sbin"): OSError: [Errno 2] There is no such file or directory: '/mnt/runtime/usr/sbin' I mkdir -p /mnt/runtime/usr/sbin,than it works.Followed the steps and configured to kickstart page, clicked "Next" button.There is a message said: 09:59:09 CRITICAL: Traceback (most recent call first): File "/usr/lib/anaconda/urlinstall.py", line 95, in systemMounted self.loopbackFile = "%s%s%s" % (chroot, File "/usr/lib/anaconda/yuminstall.py", line 1330, in doPreInstall if self.method.systemMounted (anaconda.id.fsset, anaconda.rootPath): File "/usr/lib/anaconda/backend.py", line 180, in doPreInstall anaconda.backend.doPreInstall(anaconda) File "/usr/lib/anaconda/dispatch.py", line 201, in moveStep rc = stepFunc(self.anaconda) File "/usr/lib/anaconda/dispatch.py", line 124, in gotoNext self.moveStep() File "/usr/lib/anaconda/gui.py", line 1018, in nextClicked self.anaconda.dispatch.gotoNext() File "/usr/lib/anaconda/iw/progress_gui.py", line 243, in renderCallback self.intf.icw.nextClicked() File "/usr/lib/anaconda/gui.py", line 1045, in handleRenderCallback self.currentWindow.renderCallback() IndexError: list index out of range Which option should I added? Did I forgot something else? Is there anyway to fix it? Thanks in advance.

1 0

Managing Eclipse Plugins
by Clint Dilks 05 Jun '08

05 Jun '08

Hi People, I just wondered if anyone had an suggestions on how to manage Eclipse plugins where RPMS don't exist for the particular plugin. In this case Aptana. Using the instructions here http://www.aptana.com/docs/index.php/Plugging_Aptana_into_an_existing_Eclip… I can install the plugin manually to /usr/share/eclipse so that its available to all users on the box. But I need to install this plugin on a high number of machines. I know I could install it on a single machine and then tar up /usr/share/eclipse and turn this into an rpm. But I think this will be asking for trouble in the long run. So I then did some research and found that I should be able to use eclipse update manager from the command line see http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse.platform.doc.is… Thinking that perhaps I could use a script to do the install or use a script to create an RPM. But so far I can't get any of the Eclipse Update Manager commands to work. Asking on some eclipse Newsgroups has got a couple of cryptic responses. So I thought I would ask if anyone had ideas about the best way to achieve what I am after. Also if anyone uses the Eclipse Update Manager from the command line and can give me an example of a command line that works, it would be much appreciated. Thanks

1 0

Compile error on CentOS 4.6
by Dongyoon Lee 05 Jun '08

05 Jun '08

I am installing SPLASH(http://www-flash.stanford.edu/SPLASH/) benchmark codes on CentOS 4.6. And there is compile error during make.. Here is the error messages. Does it come from the gcc library? Should I update the gcc or other library? [root@localhost barnes]# make BARNES make: Warning: File `code.C' has modification time 6e+02 s in the future m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null code.C > code.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels code.c m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null code_io.C > code_io.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels code_io.c m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null load.C > load.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels load.c m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null grav.C > grav.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels grav.c m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null getparam.C > getparam.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels getparam.c m4 -s -Ulen -Uindex /mnt/hgfs/CentOS-4.6-i386_Shared/splash2/codes/null_macros/c.m4.null util.C > util.c gcc -c -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels util.c gcc code.o code_io.o load.o grav.o getparam.o util.o -O3 -pthread -D_POSIX_C_SOURCE=200112 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wdisabled-optimization -Wpadded -Winline -Wpointer-arith -Wsign-compare -Wendif-labels -o BARNES -lm /usr/lib/gcc/i386-redhat-linux/3.4.6/../../../crt1.o(.text+0x18): In function `_start': : undefined reference to `main' collect2: ld returned 1 exit status make: *** [BARNES] Error 1 FYI, here is the gcc version info. [root@localhost barnes]# gcc -v Reading specs from /usr/lib/gcc/i386-redhat-linux/3.4.6/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=i386-redhat-linux Thread model: posix gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)

1 0

Installing GLIBC for CentOS 4.6
by Dongyoon Lee 05 Jun '08

05 Jun '08

I'd like to modify pthread library ( e.g. manipulating some functions ) in glibc, so I want to compile and install modified glibc. However, I failed to compile glibc and need some help. How can I fix the problem? Here is the process that I've tried. 1. download glibc-2.3.4.tar.tar from http://ftp.gnu.org/gnu/glibc/ 2. unzip glibc-2.3.4.tar.tar 3. make build-folder [root@localhost /]# mkdir glibc-2.3.4-build [root@localhost /]# cd glibc-2.3.4-build 4. configure (in the build-folder) [root@localhost /]# ../glibc-2.3.4/configure --prefix=/usr --enable-add-ons 5. make (in the build-folder) [root@localhost /]# make ..... make -C csu subdir_lib make[2]: Entering directory `/mnt/hgfs/CentOS-4.6-i386_Shared/glibc-2.3.4/csu' /mnt/hgfs/CentOS-4.6-i386_Shared/glibc-2.3.4-build/bits/stdio_lim.d:1: warning: NUL character seen; rest of line ignored /mnt/hgfs/CentOS-4.6-i386_Shared/glibc-2.3.4-build/bits/stdio_lim.d:1: *** missing separator. Stop. make[2]: Leaving directory `/mnt/hgfs/CentOS-4.6-i386_Shared/glibc-2.3.4/csu' make[1]: *** [csu/subdir_lib] Error 2 make[1]: Leaving directory `/mnt/hgfs/CentOS-4.6-i386_Shared/glibc-2.3.4' make: *** [all] Error 2 FYI, Here is my current information. [root@localhost /]# cat /proc/version Linux version 2.6.9-67.ELsmp (mockbuild(a)builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Nov 16 12:48:03 EST 2007 [root@localhost /]# rpm -qa | grep gcc gcc-3.4.6-9 gcc4-gfortran-4.1.2-14.EL4 gcc4-java-4.1.2-14.EL4 gcc-objc-3.4.6-9 gcc-g77-3.4.6-9 gcc4-4.1.2-14.EL4 compat-gcc-32-c++-3.2.3-47.3 gcc-gnat-3.4.6-9 gcc4-c++-4.1.2-14.EL4 compat-gcc-32-3.2.3-47.3 libgcc-3.4.6-9 gcc-java-3.4.6-9 gcc-c++-3.4.6-9 compat-libgcc-296-2.96-132.7.2 [root@localhost /]# rpm -qa | grep glibc glibc-kernheaders-2.4-9.1.100.EL glibc-2.3.4-2.39 glibc-headers-2.3.4-2.39 glibc-common-2.3.4-2.39 glibc-devel-2.3.4-2.39 compat-glibc-headers-2.3.2-95.30 glibc-utils-2.3.4-2.39 compat-glibc-2.3.2-95.30 glibc-profile-2.3.4-2.39

2 1

Re: XFS install issue
by mslist＠opcenter.net 05 Jun '08

05 Jun '08

Continuing to get XFS to work Instaled # yum instal kmod-xfs.x86_64 # yum install xfsprogs.x86_64 # yum install xfsdump.x86_64 # yum install xfsprogs.x86_64 Rebooted # fdisk /dev/sdb Created the partition. fdisk reported Disk /dev/sdb: 7731.4 GB, 7731478004224 bytes 255 heads, 63 sectors/track, 939965 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Fdisk will only allowed 267349 (2TB) for the partition. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 223G 5.9G 206G 3% / tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sdb1 2.0T 1.1M 2.0T 1% /home How can I create a partition grater then 2TB. Also I have noticed that the GUI utilities do not recanisr the partition at all. Is there anything else that I need to install? Mike

7 7

Blocking external usb storage
by whoami i 05 Jun '08

05 Jun '08

HI, This is my first mail to this mailing list.I want to block external usb storage completly on my server running on centos 5 having confidiential data. For that i used udev and blocked the external usb storage by creating the udev rule mentioning any usb storage will get mounted to /dev/null so that users cant mount as well. But in the mean time i am getting below logs in my /var/log/messages file when i insert any usb storage device. ###################################################### May 23 12:24:02 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 4 May 23 12:24:02 localhost kernel: usb 1-4: configuration #1 chosen from 1 choice May 23 12:24:02 localhost kernel: scsi3 : SCSI emulation for USB Mass Storage devices May 23 12:24:07 localhost kernel: scsi 3:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] 1981440 512-byte hardware sectors (1014 MB) May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] Write Protect is off May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] 1981440 512-byte hardware sectors (1014 MB) May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] Write Protect is off May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through May 23 12:24:07 localhost kernel: sdb: sdb1 May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] Attached SCSI removable disk May 23 12:24:07 localhost kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0 ############################################## I want to know how device name sdb1[see above log] was allocated and is it possible to block the device node creation,if so wht i can do to block the same in my messages log. Regards lingu

9 8

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss