- Discuss - lists.centos.org

Yum update wants to overwrite newer app package
by MHR 14 Dec '07

14 Dec '07

This is probably a dumb question, but I'll ask anyway (I do that - you all know... :-). Due to a bug I found in OOo 2.0, I moved to using OOo 2.3, back when I was still running CentOS 5.0. Now that I have upgraded to 5.1, yum wants to update my OOo from 2.3 BACK to 2.0. Is it possible to get yum to recognize that 2.3 is newer than 2.0, or should I just exclude OOo from the updates? Thanks. mhr

5 9

How do you backup a LVM LV?
by Christian Nygaard 14 Dec '07

14 Dec '07

I have a virtual machine in a Xen LV, that I would like to backup from hostA to hostB because hostA is software broken. How do I copy and recreate that LV on hostB? Greets, Chris

2 1

Regd: iptables port forward and response from the forwarding port
by Balaji 13 Dec '07

13 Dec '07

Dear All, I am still new to iptables and need some clarification and My Current Setup is CentOS 4.4 I need to implement some sort of transparent proxy server for the rsync protocol. (In case you don't know: rsync uses tcp and the standard port 873). I want to port forward the rsync client request to server2 from server1 and Details are given below 1. I am Execute the rsync command from client to server1 (192.168.13.165:8888 i.e with dummy port number ) 2. In Server1 192.168.13.165 will redirect the rsync request from client to sever2 (192.168.13.205 with default port number) 3. Transfer the data from server2 to rsync client The following requirement is possible by using iptables Thanks for reading / answering! Any help appreciated... Regards -S.Balaji

2 1

captive portal
by Dave 13 Dec '07

13 Dec '07

Hello, Forgive the cross-posting, but googling showed results from these two lists. I'm looking to set up a WiFi gateway with two nics, and iptables. The catch is i have to use a captive portal as well to ensure all traffic goes to a single destination. I've read about several packages, but haven't seen any docs that say how to integrate everything. If anyone has this setup i'd appreciate knowing what software your using, and experiences with it, positive or negative. Thanks. Dave.

2 1

Strange GUI/GNOME Lockups
by Jayson Rowe 13 Dec '07

13 Dec '07

First, a hello to all! I recently moved to CentOS from Fedora on my primary desktop due to a desire to have a highly reliable stable desktop that would be supported long term without constant upgrades. I'll keep my laptop Fedora to see what's new, but I wanted CentOS to be my ultimate "stable" workstation. However, since installing CentOS 5.1 I have been plagued by a strange problem I haven't seen in ANY other distro I've ran on this PC, including a RHEL 5 30 Day Demo that prompted me to install CentOS in the first place. My GUI (GNOME desktop BTW) will randomly have strange little lockups or freezes where I can't interact with any windows or use any menus or applets. SOMETIMES I can ctrl+alt+arrow to another workspace to free it up, but just now I had to ctrl+alt+backspace to free it up. There is nothing strange in /var/log or the system logs. It just simply freezes. I'm hoping that someone would have some kind of suggestion, or even where to start looking for a solution, as I REALLY want CentOS to be my FT OS on this machine. Thanks in advance for any help.

2 1

SCSI controller suggestions for a 5.x server?
by Rob Lines 13 Dec '07

13 Dec '07

We are preparing for a new file server (Dell 2970) with an external disk array with integrated RAID (raidking.com) The array presents via Ultra 320 SCSI. We are looking for anyone that has had experience or opinions on SCSI cards without RAID that have a good performance working under CentOS 5.x. Any suggestions/comments on the controllers with large storage especially at or above 2tb would be appreciated. Any help would be appretiated and any additional information that is needed please ask. Thank you, Rob Lines

3 5

phpmyadmin issue- what's really working at this time?
by Brian 13 Dec '07

13 Dec '07

Basic phpmyadmin issue, but I can't seem to solve it. Qube3 with CentOS 4.5, PHP4.3.9, BlueQuartz. phpmyadmin was working a while but after long disuse, the index.php now just displays as text. DirectoryIndex in httpd.conf at /etc/httpd/conf/httpd.conf /etc/admserv/conf/httpd.conf has index.php added. /etc/httpd/conf.d/php.conf if I uncomment the AddType to bring in *.php, the phpmyadmin startup breaks but clicking on the direct link to config.inc.php gives a blank screen (so I guess loads fine). /etc/admserv/conf.d/php.conf already had the Addtype uncommented but it doesn't seem to be used(?) If I put 2.8.* phpmyadmin in per the BQ wiki (and config it minimally as the example), apache fails to load, same for 2.10. Should this be fine with the 2.7? I didn't touch it :), it seems to have broken as part of regular yum updates-- perhaps the php update in Sept? (I haven't used phpmyadmin for a long time). What is supposed to be working at this time with our aging base? I'll then put that on and then troubleshoot from there. Thanks- Brian

1 1

RE: [CentOS] Re: What is equivalent to MS OUTLOOK ?
by James D. Parra 13 Dec '07

13 Dec '07

on 12/13/2007 11:05 AM John R Pierce spake the following: > Scott Silva wrote: >>> Try Thunderbird with the Calendar plug-in. >> >> No windows version that I am aware of. >> >> > > > Hmmm? I run Thunderbird on my Windows all the time. > But the top-posted part I replied to was about Evolution. <quote> > evolution <<<<-------- > > -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of James D. Parra > Sent: Thursday, December 13, 2007 7:39 AM > To: 'CentOS mailing list' > Subject: RE: [CentOS] What is equivalent to MS OUTLOOK ? > >> Hi All, >> >> I am looking for an open source email client package that is > equivalent to >> MS OUTLOOK. >> > ~~~~~~~~ > > Try Thunderbird with the Calendar plug-in. > ~James No windows version that I am aware of. </quote> ~~~~~~~~~~~~~~~~~~~~~~~~`` There is a windows version that runs on XP only. http://shellter.sourceforge.net/evolution/ Although, I have had good success with Thunderbird. ~James

1 0

yum update failing for dependency
by Saurabh Sharma 13 Dec '07

13 Dec '07

[root@XBox ~]# yum update Loading "priorities" plugin Loading "installonlyn" plugin Setting up Update Process Setting up repositories Reading repository metadata in from local files 179 packages excluded due to repository priority protections Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package openssh-clients.i386 0:4.3p2-24.el5 set to be updated ---> Package libacl.i386 0:2.2.39-2.1.el5 set to be updated ---> Package libuser.i386 0:0.54.7-2.el5.2 set to be updated ---> Package kudzu.i386 0:1.2.57.1.15-1.el5.centos set to be updated ---> Package hal.i386 0:0.5.8.1-25.el5_1.1 set to be updated ---> Package firstboot.noarch 0:1.4.27.3-1.el5.centos set to be updated ---> Package kernel-devel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package system-config-network-tui.noarch 0:1.3.99-2.el5 set to be updated ---> Package tomcat5-jsp-2.0-api.i386 0:5.5.23-0jpp.3.0.2.el5 set to be updated ---> Package cups-libs.i386 1:1.2.4-11.14.el5_1.3 set to be updated ---> Package dhclient.i386 12:3.0.5-7.el5 set to be updated ---> Package microcode_ctl.i386 1:1.17-1.42.el5 set to be updated ---> Package pkinit-nss.i386 0:0.7.3-1.el5 set to be updated ---> Package pwlib.i386 0:1.10.1-7.0.1.el5 set to be updated ---> Package firstboot-tui.noarch 0:1.4.27.3-1.el5.centos set to be updated ---> Package nss_ldap.i386 0:253-5.el5 set to be updated ---> Package cracklib-dicts.i386 0:2.8.9-3.3 set to be updated ---> Package sysklogd.i386 0:1.4.1-40.el5 set to be updated ---> Package system-config-network.noarch 0:1.3.99-2.el5 set to be updated ---> Package libpcap.i386 14:0.9.4-11.el5 set to be updated ---> Package xorg-x11-drv-nv.i386 0:2.1.2-1.el5 set to be updated ---> Package lvm2.i386 0:2.02.26-3.el5 set to be updated ---> Package tzdata.noarch 0:2007j-1.el5 set to be updated ---> Package nss-tools.i386 0:3.11.7-1.3.el5.centos set to be updated ---> Package libicu.i386 0:3.6-5.11 set to be updated ---> Package xmms.i386 1:1.2.10-14.el5.rf set to be updated ---> Package binutils.i386 0:2.17.50.0.6-5.el5 set to be updated ---> Package libstdc++.i386 0:4.1.2-14.el5 set to be updated ---> Package glibc-common.i386 0:2.5-18.el5_1.1 set to be updated ---> Package redhat-lsb.i386 0:3.1-12.3.EL.el5.centos set to be updated ---> Package redhat-artwork.i386 0:5.1.0-26.el5.centos set to be updated ---> Package samba-client.i386 0:3.0.25b-1.el5_1.4 set to be updated ---> Package rpm-libs.i386 0:4.4.2-47.el5 set to be updated ---> Package coolkey.i386 0:1.1.0-5.el5 set to be updated ---> Package hwdata.noarch 0:0.211-1 set to be updated ---> Package openoffice.org-calc.i386 1:2.0.4-5.4.24 set to be updated ---> Package tar.i386 2:1.15.1-23.0.1.el5 set to be updated ---> Package libvorbis.i386 1:1.1.2-3.el5.0 set to be updated ---> Package rhpxl.i386 0:0.41.1-1.el5 set to be updated ---> Package enscript.i386 0:1.6.4-4.1.el5 set to be updated ---> Package openssl.i686 0:0.9.8b-8.3.el5_0.2 set to be updated ---> Package module-init-tools.i386 0:3.3-0.pre3.1.34.el5 set to be updated ---> Package file.i386 0:4.17-9.0.1.el5 set to be updated ---> Package yum.noarch 0:3.0.5-1.el5.centos.5 set to be updated ---> Package tcpdump.i386 14:3.9.4-11.el5 set to be updated ---> Package crash.i386 0:4.0-4.6.1 set to be updated ---> Package mesa-libGL.i386 0:6.5.1-7.5.el5 set to be updated ---> Package openoffice.org-draw.i386 1:2.0.4-5.4.24 set to be updated ---> Package nscd.i386 0:2.5-18.el5_1.1 set to be updated ---> Package xorg-x11-drv-mga.i386 0:1.4.2-6.el5 set to be updated ---> Package cracklib.i386 0:2.8.9-3.3 set to be updated ---> Package vixie-cron.i386 4:4.1-72.el5 set to be updated ---> Package kernel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package pm-utils.i386 0:0.99.3-6.el5.centos.17 set to be updated ---> Package rhgb.i386 0:0.16.4-8.el5.centos.1 set to be updated ---> Package vim-minimal.i386 2:7.0.109-3.el5.3 set to be updated ---> Package libgcj.i386 0:4.1.2-14.el5 set to be updated ---> Package hplip.i386 0:1.6.7-4.1.el5.3 set to be updated ---> Package krb5-libs.i386 0:1.6.1-17.el5 set to be updated ---> Package xorg-x11-drv-evdev.i386 1:1.0.0.5-3.el5 set to be updated ---> Package openoffice.org-impress.i386 1:2.0.4-5.4.24 set to be updated ---> Package krb5-workstation.i386 0:1.6.1-17.el5 set to be updated ---> Package nss.i386 0:3.11.7-1.3.el5.centos set to be updated ---> Package mcstrans.i386 0:0.2.6-1.el5 set to be updated ---> Package selinux-policy.noarch 0:2.4.6-106.el5_1.3 set to be updated ---> Package popt.i386 0:1.10.2-47.el5 set to be updated ---> Package centos-release-notes.i386 0:5.1.0-2 set to be updated ---> Package e2fsprogs-libs.i386 0:1.39-10.el5 set to be updated ---> Package cairo.i386 0:1.2.4-3.el5_1 set to be updated ---> Package nfs-utils-lib.i386 0:1.0.8-7.2.z2 set to be updated ---> Package net-snmp-libs.i386 1:5.3.1-19.el5_1.2 set to be updated ---> Package perl-Compress-Zlib.noarch 0:2.007-1.el5.rf set to be updated ---> Package acl.i386 0:2.2.39-2.1.el5 set to be updated ---> Package hpijs.i386 1:1.6.7-4.1.el5.3 set to be updated ---> Package openldap.i386 0:2.3.27-8 set to be updated ---> Package openssh-server.i386 0:4.3p2-24.el5 set to be updated ---> Package opal.i386 0:2.2.2-1.1.0.1 set to be updated ---> Package ekiga.i386 0:2.0.2-7.0.2 set to be updated ---> Package kernel-headers.i386 0:2.6.18-53.1.4.el5 set to be updated ---> Package libXfont.i386 0:1.2.2-1.0.2.el5 set to be updated ---> Package openoffice.org-xsltfilter.i386 1:2.0.4-5.4.24 set to be updated ---> Package man-pages.noarch 0:2.39-10.el5 set to be updated ---> Package gdm.i386 1:2.16.0-31.0.1.el5.centos set to be updated ---> Package openoffice.org-writer.i386 1:2.0.4-5.4.24 set to be updated ---> Package spamassassin.i386 0:3.1.9-1.el5 set to be updated ---> Package pam.i386 0:0.99.6.2-3.26.el5 set to be updated ---> Package vim-common.i386 2:7.0.109-3.el5.3 set to be updated ---> Package openoffice.org-graphicfilter.i386 1:2.0.4-5.4.24 set to be updated ---> Package policycoreutils.i386 0:1.33.12-12.el5 set to be updated ---> Package hal-gnome.i386 0:0.5.8.1-25.el5_1.1 set to be updated ---> Package kpartx.i386 0:0.4.7-12.el5 set to be updated ---> Package yum-updatesd.noarch 0:3.0.5-1.el5.centos.5 set to be updated ---> Package xorg-x11-server-Xorg.i386 0:1.1.1-48.26.el5 set to be updated ---> Package telnet.i386 1:0.17-39.el5 set to be updated ---> Package libgcc.i386 0:4.1.2-14.el5 set to be updated ---> Package redhat-logos.noarch 0:4.9.99-8.el5.centos set to be updated ---> Package tcp_wrappers.i386 0:7.6-40.4.el5 set to be updated ---> Package libX11.i386 0:1.0.3-8.0.1.el5 set to be updated ---> Package vim-enhanced.i386 2:7.0.109-3.el5.3 set to be updated ---> Package sos.noarch 0:1.7-9.1.el5 set to be updated ---> Package bind-libs.i386 30:9.3.3-10.el5 set to be updated ---> Package libwpd.i386 0:0.8.7-3.el5 set to be updated ---> Package gstreamer-plugins-good.i386 0:0.10.4-4.el5 set to be updated ---> Package xterm.i386 0:215-5.el5 set to be updated ---> Package poppler.i386 0:0.5.4-4.3.el5_1 set to be updated ---> Package xorg-x11-drv-i810.i386 0:1.6.5-9.6.el5 set to be updated ---> Package libgomp.i386 0:4.1.2-14.el5 set to be updated ---> Package kernel-xen-devel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package flac.i386 0:1.1.2-28.el5_0.1 set to be updated ---> Package libselinux-python.i386 0:1.33.4-4.el5 set to be updated ---> Package libvolume_id.i386 0:095-14.9.el5 set to be updated ---> Package autofs.i386 1:5.0.1-0.rc2.55.el5.1 set to be updated ---> Package openssh.i386 0:4.3p2-24.el5 set to be updated ---> Package irqbalance.i386 2:0.55-6.el5 set to be updated ---> Package yelp.i386 0:2.16.0-15.el5 set to be updated ---> Package freetype.i386 0:2.2.1-19.el5 set to be updated ---> Package gimp.i386 2:2.2.13-2.0.7.el5 set to be updated ---> Package pcre.i386 0:6.6-2.el5_1.7 set to be updated ---> Package xorg-x11-drv-keyboard.i386 0:1.1.0-3 set to be updated ---> Package yum-priorities.noarch 0:1.0.4-3.el5.centos.2 set to be updated ---> Package elinks.i386 0:0.11.1-5.1.0.1.el5 set to be updated ---> Package mutt.i386 5:1.4.2.2-3.0.2.el5 set to be updated ---> Package audit-libs-python.i386 0:1.5.5-7.el5 set to be updated ---> Package evolution-data-server.i386 0:1.8.0-25.el5 set to be updated ---> Package audit.i386 0:1.5.5-7.el5 set to be updated ---> Package initscripts.i386 0:8.45.17.EL-1.el5.centos.1 set to be updated ---> Package libdca.i386 0:0.0.5-1.el5.rf set to be updated ---> Package xorg-x11-xfs.i386 1:1.0.2-4 set to be updated ---> Package mkinitrd.i386 0:5.1.19.6-19 set to be updated ---> Package ntp.i386 0:4.2.2p1-7.el5 set to be updated ---> Package e2fsprogs.i386 0:1.39-10.el5 set to be updated ---> Package bind-utils.i386 30:9.3.3-10.el5 set to be updated ---> Package glibc.i686 0:2.5-18.el5_1.1 set to be updated ---> Package rsh.i386 0:0.17-38.el5 set to be updated ---> Package pam_krb5.i386 0:2.2.14-1 set to be updated ---> Package udev.i386 0:095-14.9.el5 set to be updated ---> Package firefox.i386 0:1.5.0.12-7.el5.centos set to be updated ---> Package xorg-x11-drv-vesa.i386 0:1.3.0-8.1.el5 set to be updated ---> Package nfs-utils.i386 1:1.0.9-24.el5 set to be updated ---> Package libselinux.i386 0:1.33.4-4.el5 set to be updated ---> Package qt.i386 1:3.3.6-23.el5 set to be updated ---> Package pidgin.i386 0:2.0.2-3.el5 set to be updated ---> Package perl-Net-DNS.i386 0:0.59-3.el5 set to be updated ---> Package cups.i386 1:1.2.4-11.14.el5_1.3 set to be updated ---> Package alsa-lib.i386 0:1.0.14-1.rc4.el5 set to be updated ---> Package gnupg.i386 0:1.4.5-13 set to be updated ---> Package openoffice.org-core.i386 1:2.0.4-5.4.24 set to be updated ---> Package libsane-hpaio.i386 0:1.6.7-4.1.el5.3 set to be updated ---> Package rpm-python.i386 0:4.4.2-47.el5 set to be updated ---> Package libpng.i386 2:1.2.10-7.1.el5_0.1 set to be updated ---> Package xorg-x11-apps.i386 0:7.1-4.0.1.el5 set to be updated ---> Package esc.i386 0:1.0.0-32.el5 set to be updated ---> Package rpm.i386 0:4.4.2-47.el5 set to be updated ---> Package gnome-power-manager.i386 0:2.16.0-8.el5 set to be updated ---> Package audit-libs.i386 0:1.5.5-7.el5 set to be updated ---> Package xorg-x11-server-Xnest.i386 0:1.1.1-48.26.el5 set to be updated ---> Package openoffice.org-math.i386 1:2.0.4-5.4.24 set to be updated ---> Package logrotate.i386 0:3.7.4-8 set to be updated ---> Package prelink.i386 0:0.3.9-2.1 set to be updated ---> Package gcc.i386 0:4.1.2-14.el5 set to be updated ---> Package perl.i386 4:5.8.8-10.el5_0.2 set to be updated ---> Package sabayon-apply.i386 0:2.12.4-5.el5 set to be updated ---> Package cpp.i386 0:4.1.2-14.el5 set to be updated ---> Package gimp-libs.i386 2:2.2.13-2.0.7.el5 set to be updated ---> Package samba-common.i386 0:3.0.25b-1.el5_1.4 set to be updated ---> Package util-linux.i386 0:2.13-0.45.el5_1.1 set to be updated ---> Package parted.i386 0:1.8.1-12.el5 set to be updated ---> Package gtk2.i386 0:2.10.4-19.el5 set to be updated ---> Package selinux-policy-targeted.noarch 0:2.4.6-106.el5_1.3 set to be updated ---> Package ypbind.i386 3:1.19-8.el5 set to be updated ---> Package glx-utils.i386 0:6.5.1-7.5.el5 set to be updated ---> Package libpurple.i386 0:2.0.2-3.el5 set to be updated ---> Package ipsec-tools.i386 0:0.6.5-8.el5 set to be updated ---> Package libexif.i386 0:0.6.13-4.0.2.el5 set to be updated ---> Package cpuspeed.i386 1:1.2.1-1.48.el5 set to be updated ---> Package Deployment_Guide-en-US.noarch 0:5.1.0-11.el5.centos.1 set to be updated ---> Package centos-release.i386 10:5-1.0.el5.centos.1 set to be updated ---> Package glibc-headers.i386 0:2.5-18.el5_1.1 set to be updated ---> Package glibc-devel.i386 0:2.5-18.el5_1.1 set to be updated ---> Package tomcat5-servlet-2.4-api.i386 0:5.5.23-0jpp.3.0.2.el5 set to be updated ---> Package redhat-menus.noarch 0:6.7.8-2.el5 set to be updated ---> Package fetchmail.i386 0:6.3.6-1.1.el5 set to be updated ---> Package mesa-libGLU.i386 0:6.5.1-7.5.el5 set to be updated ---> Package alsa-utils.i386 0:1.0.14-2.rc4.el5 set to be updated ---> Package nash.i386 0:5.1.19.6-19 set to be updated ---> Package dmraid.i386 0:1.0.0.rc13-4.el5 set to be updated ---> Package nspr.i386 0:4.6.5-3.el5 set to be updated ---> Package postgresql-libs.i386 0:8.1.9-1.el5 set to be updated ---> Package device-mapper.i386 0:1.02.20-1.el5 set to be updated ---> Package openssh-askpass.i386 0:4.3p2-24.el5 set to be updated ---> Package httpd.i386 0:2.2.3-11.el5.centos set to be updated ---> Package conman.i386 0:0.1.9.2-8.el5 set to be updated ---> Package lame.i386 0:3.97-3.lvn5 set to be updated --> Running transaction check --> Processing Dependency: gamin-python for package: sabayon-apply --> Processing Dependency: perl(HTTP::Date) for package: spamassassin --> Processing Dependency: libhowl.so.0 for package: libpurple --> Processing Dependency: libmikmod.so.2 for package: xmms --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Processing Dependency: perl(IO::Uncompress::Gunzip) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: libmeanwhile.so.1 for package: libpurple --> Processing Dependency: libmp3lame.so.0 for package: gstreamer-plugins-ugly --> Processing Dependency: lame-libs = 3.97-3.lvn5 for package: lame --> Processing Dependency: libkeyutils.so.1 for package: krb5-workstation --> Processing Dependency: libmp3lame.so.0 for package: libquicktime --> Processing Dependency: libkeyutils.so.1 for package: krb5-libs --> Processing Dependency: libmp3lame.so.0 for package: lame --> Processing Dependency: libmp3lame.so.0 for package: vlc --> Processing Dependency: perl(IO::Compress::Gzip) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: perl(IO::Compress::Gzip::Constants) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: perl(LWP::UserAgent) for package: spamassassin --> Processing Dependency: perl(IO::Compress::Base::Common) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: python-ldap for package: sabayon-apply --> Processing Dependency: device-mapper-multipath >= 0.4.7-9 for package: mkinitrd --> Processing Dependency: perl(Compress::Raw::Zlib) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: yum-metadata-parser for package: yum --> Processing Dependency: libkeyutils.so.1(KEYUTILS_0.3) for package: krb5-libs --> Processing Dependency: libmp3lame.so.0 for package: ffmpeg --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package perl-Compress-Raw-Zlib.i386 0:2.006-1.el5.rf set to be updated ---> Package meanwhile.i386 0:1.0.2-5.el5 set to be updated ---> Package python-ldap.i386 0:2.2.0-2.1 set to be updated ---> Package lame-libs.i386 0:3.97-3.lvn5 set to be updated ---> Package avahi-compat-howl.i386 0:0.6.16-1.el5 set to be updated ---> Package mikmod.i386 0:3.1.6-38.1 set to be updated ---> Package perl-IO-Compress-Zlib.noarch 0:2.006-1.el5.rf set to be updated ---> Package perl-IO-Compress-Base.noarch 0:2.006-1.el5.rf set to be updated ---> Package gamin-python.i386 0:0.1.7-8.el5 set to be updated ---> Package yum-metadata-parser.i386 0:1.0-8.fc6 set to be updated ---> Package keyutils-libs.i386 0:1.2-1.el5 set to be updated ---> Package perl-libwww-perl.noarch 0:5.805-1.1.1 set to be updated ---> Package device-mapper-multipath.i386 0:0.4.7-12.el5 set to be updated --> Running transaction check --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: perl(URI::Heuristic) for package: perl-libwww-perl --> Processing Dependency: perl(URI::URL) for package: perl-libwww-perl --> Processing Dependency: perl(URI::Escape) for package: perl-libwww-perl --> Processing Dependency: perl(URI) for package: perl-libwww-perl --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package perl-URI.noarch 0:1.35-3 set to be updated --> Running transaction check --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Finished Dependency Resolution Error: Missing Dependency: libdts.so.0 is needed by package mplayer-gui Error: Missing Dependency: libdts.so.0 is needed by package mplayer [root@XBox ~]# yum update --exclude libdts Loading "priorities" plugin Loading "installonlyn" plugin Setting up Update Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished 179 packages excluded due to repository priority protections Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package openssh-clients.i386 0:4.3p2-24.el5 set to be updated ---> Package libacl.i386 0:2.2.39-2.1.el5 set to be updated ---> Package libuser.i386 0:0.54.7-2.el5.2 set to be updated ---> Package kudzu.i386 0:1.2.57.1.15-1.el5.centos set to be updated ---> Package hal.i386 0:0.5.8.1-25.el5_1.1 set to be updated ---> Package firstboot.noarch 0:1.4.27.3-1.el5.centos set to be updated ---> Package kernel-devel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package system-config-network-tui.noarch 0:1.3.99-2.el5 set to be updated ---> Package tomcat5-jsp-2.0-api.i386 0:5.5.23-0jpp.3.0.2.el5 set to be updated ---> Package cups-libs.i386 1:1.2.4-11.14.el5_1.3 set to be updated ---> Package dhclient.i386 12:3.0.5-7.el5 set to be updated ---> Package microcode_ctl.i386 1:1.17-1.42.el5 set to be updated ---> Package pkinit-nss.i386 0:0.7.3-1.el5 set to be updated ---> Package pwlib.i386 0:1.10.1-7.0.1.el5 set to be updated ---> Package firstboot-tui.noarch 0:1.4.27.3-1.el5.centos set to be updated ---> Package nss_ldap.i386 0:253-5.el5 set to be updated ---> Package cracklib-dicts.i386 0:2.8.9-3.3 set to be updated ---> Package sysklogd.i386 0:1.4.1-40.el5 set to be updated ---> Package system-config-network.noarch 0:1.3.99-2.el5 set to be updated ---> Package libpcap.i386 14:0.9.4-11.el5 set to be updated ---> Package xorg-x11-drv-nv.i386 0:2.1.2-1.el5 set to be updated ---> Package lvm2.i386 0:2.02.26-3.el5 set to be updated ---> Package tzdata.noarch 0:2007j-1.el5 set to be updated ---> Package nss-tools.i386 0:3.11.7-1.3.el5.centos set to be updated ---> Package libicu.i386 0:3.6-5.11 set to be updated ---> Package xmms.i386 1:1.2.10-14.el5.rf set to be updated ---> Package binutils.i386 0:2.17.50.0.6-5.el5 set to be updated ---> Package libstdc++.i386 0:4.1.2-14.el5 set to be updated ---> Package glibc-common.i386 0:2.5-18.el5_1.1 set to be updated ---> Package redhat-lsb.i386 0:3.1-12.3.EL.el5.centos set to be updated ---> Package redhat-artwork.i386 0:5.1.0-26.el5.centos set to be updated ---> Package samba-client.i386 0:3.0.25b-1.el5_1.4 set to be updated ---> Package rpm-libs.i386 0:4.4.2-47.el5 set to be updated ---> Package coolkey.i386 0:1.1.0-5.el5 set to be updated ---> Package hwdata.noarch 0:0.211-1 set to be updated ---> Package openoffice.org-calc.i386 1:2.0.4-5.4.24 set to be updated ---> Package tar.i386 2:1.15.1-23.0.1.el5 set to be updated ---> Package libvorbis.i386 1:1.1.2-3.el5.0 set to be updated ---> Package rhpxl.i386 0:0.41.1-1.el5 set to be updated ---> Package enscript.i386 0:1.6.4-4.1.el5 set to be updated ---> Package openssl.i686 0:0.9.8b-8.3.el5_0.2 set to be updated ---> Package module-init-tools.i386 0:3.3-0.pre3.1.34.el5 set to be updated ---> Package file.i386 0:4.17-9.0.1.el5 set to be updated ---> Package yum.noarch 0:3.0.5-1.el5.centos.5 set to be updated ---> Package tcpdump.i386 14:3.9.4-11.el5 set to be updated ---> Package crash.i386 0:4.0-4.6.1 set to be updated ---> Package mesa-libGL.i386 0:6.5.1-7.5.el5 set to be updated ---> Package openoffice.org-draw.i386 1:2.0.4-5.4.24 set to be updated ---> Package nscd.i386 0:2.5-18.el5_1.1 set to be updated ---> Package xorg-x11-drv-mga.i386 0:1.4.2-6.el5 set to be updated ---> Package cracklib.i386 0:2.8.9-3.3 set to be updated ---> Package vixie-cron.i386 4:4.1-72.el5 set to be updated ---> Package kernel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package pm-utils.i386 0:0.99.3-6.el5.centos.17 set to be updated ---> Package rhgb.i386 0:0.16.4-8.el5.centos.1 set to be updated ---> Package vim-minimal.i386 2:7.0.109-3.el5.3 set to be updated ---> Package libgcj.i386 0:4.1.2-14.el5 set to be updated ---> Package hplip.i386 0:1.6.7-4.1.el5.3 set to be updated ---> Package krb5-libs.i386 0:1.6.1-17.el5 set to be updated ---> Package xorg-x11-drv-evdev.i386 1:1.0.0.5-3.el5 set to be updated ---> Package openoffice.org-impress.i386 1:2.0.4-5.4.24 set to be updated ---> Package krb5-workstation.i386 0:1.6.1-17.el5 set to be updated ---> Package nss.i386 0:3.11.7-1.3.el5.centos set to be updated ---> Package mcstrans.i386 0:0.2.6-1.el5 set to be updated ---> Package selinux-policy.noarch 0:2.4.6-106.el5_1.3 set to be updated ---> Package popt.i386 0:1.10.2-47.el5 set to be updated ---> Package centos-release-notes.i386 0:5.1.0-2 set to be updated ---> Package e2fsprogs-libs.i386 0:1.39-10.el5 set to be updated ---> Package cairo.i386 0:1.2.4-3.el5_1 set to be updated ---> Package nfs-utils-lib.i386 0:1.0.8-7.2.z2 set to be updated ---> Package net-snmp-libs.i386 1:5.3.1-19.el5_1.2 set to be updated ---> Package perl-Compress-Zlib.noarch 0:2.007-1.el5.rf set to be updated ---> Package acl.i386 0:2.2.39-2.1.el5 set to be updated ---> Package hpijs.i386 1:1.6.7-4.1.el5.3 set to be updated ---> Package openldap.i386 0:2.3.27-8 set to be updated ---> Package openssh-server.i386 0:4.3p2-24.el5 set to be updated ---> Package opal.i386 0:2.2.2-1.1.0.1 set to be updated ---> Package ekiga.i386 0:2.0.2-7.0.2 set to be updated ---> Package kernel-headers.i386 0:2.6.18-53.1.4.el5 set to be updated ---> Package libXfont.i386 0:1.2.2-1.0.2.el5 set to be updated ---> Package openoffice.org-xsltfilter.i386 1:2.0.4-5.4.24 set to be updated ---> Package man-pages.noarch 0:2.39-10.el5 set to be updated ---> Package gdm.i386 1:2.16.0-31.0.1.el5.centos set to be updated ---> Package openoffice.org-writer.i386 1:2.0.4-5.4.24 set to be updated ---> Package spamassassin.i386 0:3.1.9-1.el5 set to be updated ---> Package pam.i386 0:0.99.6.2-3.26.el5 set to be updated ---> Package vim-common.i386 2:7.0.109-3.el5.3 set to be updated ---> Package openoffice.org-graphicfilter.i386 1:2.0.4-5.4.24 set to be updated ---> Package policycoreutils.i386 0:1.33.12-12.el5 set to be updated ---> Package hal-gnome.i386 0:0.5.8.1-25.el5_1.1 set to be updated ---> Package kpartx.i386 0:0.4.7-12.el5 set to be updated ---> Package yum-updatesd.noarch 0:3.0.5-1.el5.centos.5 set to be updated ---> Package xorg-x11-server-Xorg.i386 0:1.1.1-48.26.el5 set to be updated ---> Package telnet.i386 1:0.17-39.el5 set to be updated ---> Package libgcc.i386 0:4.1.2-14.el5 set to be updated ---> Package redhat-logos.noarch 0:4.9.99-8.el5.centos set to be updated ---> Package tcp_wrappers.i386 0:7.6-40.4.el5 set to be updated ---> Package libX11.i386 0:1.0.3-8.0.1.el5 set to be updated ---> Package vim-enhanced.i386 2:7.0.109-3.el5.3 set to be updated ---> Package sos.noarch 0:1.7-9.1.el5 set to be updated ---> Package bind-libs.i386 30:9.3.3-10.el5 set to be updated ---> Package libwpd.i386 0:0.8.7-3.el5 set to be updated ---> Package gstreamer-plugins-good.i386 0:0.10.4-4.el5 set to be updated ---> Package xterm.i386 0:215-5.el5 set to be updated ---> Package poppler.i386 0:0.5.4-4.3.el5_1 set to be updated ---> Package xorg-x11-drv-i810.i386 0:1.6.5-9.6.el5 set to be updated ---> Package libgomp.i386 0:4.1.2-14.el5 set to be updated ---> Package kernel-xen-devel.i686 0:2.6.18-53.1.4.el5 set to be installed ---> Package flac.i386 0:1.1.2-28.el5_0.1 set to be updated ---> Package libselinux-python.i386 0:1.33.4-4.el5 set to be updated ---> Package libvolume_id.i386 0:095-14.9.el5 set to be updated ---> Package autofs.i386 1:5.0.1-0.rc2.55.el5.1 set to be updated ---> Package openssh.i386 0:4.3p2-24.el5 set to be updated ---> Package irqbalance.i386 2:0.55-6.el5 set to be updated ---> Package yelp.i386 0:2.16.0-15.el5 set to be updated ---> Package freetype.i386 0:2.2.1-19.el5 set to be updated ---> Package gimp.i386 2:2.2.13-2.0.7.el5 set to be updated ---> Package pcre.i386 0:6.6-2.el5_1.7 set to be updated ---> Package xorg-x11-drv-keyboard.i386 0:1.1.0-3 set to be updated ---> Package yum-priorities.noarch 0:1.0.4-3.el5.centos.2 set to be updated ---> Package elinks.i386 0:0.11.1-5.1.0.1.el5 set to be updated ---> Package mutt.i386 5:1.4.2.2-3.0.2.el5 set to be updated ---> Package audit-libs-python.i386 0:1.5.5-7.el5 set to be updated ---> Package evolution-data-server.i386 0:1.8.0-25.el5 set to be updated ---> Package audit.i386 0:1.5.5-7.el5 set to be updated ---> Package initscripts.i386 0:8.45.17.EL-1.el5.centos.1 set to be updated ---> Package libdca.i386 0:0.0.5-1.el5.rf set to be updated ---> Package xorg-x11-xfs.i386 1:1.0.2-4 set to be updated ---> Package mkinitrd.i386 0:5.1.19.6-19 set to be updated ---> Package ntp.i386 0:4.2.2p1-7.el5 set to be updated ---> Package e2fsprogs.i386 0:1.39-10.el5 set to be updated ---> Package bind-utils.i386 30:9.3.3-10.el5 set to be updated ---> Package glibc.i686 0:2.5-18.el5_1.1 set to be updated ---> Package rsh.i386 0:0.17-38.el5 set to be updated ---> Package pam_krb5.i386 0:2.2.14-1 set to be updated ---> Package udev.i386 0:095-14.9.el5 set to be updated ---> Package firefox.i386 0:1.5.0.12-7.el5.centos set to be updated ---> Package xorg-x11-drv-vesa.i386 0:1.3.0-8.1.el5 set to be updated ---> Package nfs-utils.i386 1:1.0.9-24.el5 set to be updated ---> Package libselinux.i386 0:1.33.4-4.el5 set to be updated ---> Package qt.i386 1:3.3.6-23.el5 set to be updated ---> Package pidgin.i386 0:2.0.2-3.el5 set to be updated ---> Package perl-Net-DNS.i386 0:0.59-3.el5 set to be updated ---> Package cups.i386 1:1.2.4-11.14.el5_1.3 set to be updated ---> Package alsa-lib.i386 0:1.0.14-1.rc4.el5 set to be updated ---> Package gnupg.i386 0:1.4.5-13 set to be updated ---> Package openoffice.org-core.i386 1:2.0.4-5.4.24 set to be updated ---> Package libsane-hpaio.i386 0:1.6.7-4.1.el5.3 set to be updated ---> Package rpm-python.i386 0:4.4.2-47.el5 set to be updated ---> Package libpng.i386 2:1.2.10-7.1.el5_0.1 set to be updated ---> Package xorg-x11-apps.i386 0:7.1-4.0.1.el5 set to be updated ---> Package esc.i386 0:1.0.0-32.el5 set to be updated ---> Package rpm.i386 0:4.4.2-47.el5 set to be updated ---> Package gnome-power-manager.i386 0:2.16.0-8.el5 set to be updated ---> Package audit-libs.i386 0:1.5.5-7.el5 set to be updated ---> Package xorg-x11-server-Xnest.i386 0:1.1.1-48.26.el5 set to be updated ---> Package openoffice.org-math.i386 1:2.0.4-5.4.24 set to be updated ---> Package logrotate.i386 0:3.7.4-8 set to be updated ---> Package prelink.i386 0:0.3.9-2.1 set to be updated ---> Package gcc.i386 0:4.1.2-14.el5 set to be updated ---> Package perl.i386 4:5.8.8-10.el5_0.2 set to be updated ---> Package sabayon-apply.i386 0:2.12.4-5.el5 set to be updated ---> Package cpp.i386 0:4.1.2-14.el5 set to be updated ---> Package gimp-libs.i386 2:2.2.13-2.0.7.el5 set to be updated ---> Package samba-common.i386 0:3.0.25b-1.el5_1.4 set to be updated ---> Package util-linux.i386 0:2.13-0.45.el5_1.1 set to be updated ---> Package parted.i386 0:1.8.1-12.el5 set to be updated ---> Package gtk2.i386 0:2.10.4-19.el5 set to be updated ---> Package selinux-policy-targeted.noarch 0:2.4.6-106.el5_1.3 set to be updated ---> Package ypbind.i386 3:1.19-8.el5 set to be updated ---> Package glx-utils.i386 0:6.5.1-7.5.el5 set to be updated ---> Package libpurple.i386 0:2.0.2-3.el5 set to be updated ---> Package ipsec-tools.i386 0:0.6.5-8.el5 set to be updated ---> Package libexif.i386 0:0.6.13-4.0.2.el5 set to be updated ---> Package cpuspeed.i386 1:1.2.1-1.48.el5 set to be updated ---> Package Deployment_Guide-en-US.noarch 0:5.1.0-11.el5.centos.1 set to be updated ---> Package centos-release.i386 10:5-1.0.el5.centos.1 set to be updated ---> Package glibc-headers.i386 0:2.5-18.el5_1.1 set to be updated ---> Package glibc-devel.i386 0:2.5-18.el5_1.1 set to be updated ---> Package tomcat5-servlet-2.4-api.i386 0:5.5.23-0jpp.3.0.2.el5 set to be updated ---> Package redhat-menus.noarch 0:6.7.8-2.el5 set to be updated ---> Package fetchmail.i386 0:6.3.6-1.1.el5 set to be updated ---> Package mesa-libGLU.i386 0:6.5.1-7.5.el5 set to be updated ---> Package alsa-utils.i386 0:1.0.14-2.rc4.el5 set to be updated ---> Package nash.i386 0:5.1.19.6-19 set to be updated ---> Package dmraid.i386 0:1.0.0.rc13-4.el5 set to be updated ---> Package nspr.i386 0:4.6.5-3.el5 set to be updated ---> Package postgresql-libs.i386 0:8.1.9-1.el5 set to be updated ---> Package device-mapper.i386 0:1.02.20-1.el5 set to be updated ---> Package openssh-askpass.i386 0:4.3p2-24.el5 set to be updated ---> Package httpd.i386 0:2.2.3-11.el5.centos set to be updated ---> Package conman.i386 0:0.1.9.2-8.el5 set to be updated ---> Package lame.i386 0:3.97-3.lvn5 set to be updated --> Running transaction check --> Processing Dependency: gamin-python for package: sabayon-apply --> Processing Dependency: perl(HTTP::Date) for package: spamassassin --> Processing Dependency: libhowl.so.0 for package: libpurple --> Processing Dependency: libmikmod.so.2 for package: xmms --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Processing Dependency: perl(IO::Uncompress::Gunzip) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: libmeanwhile.so.1 for package: libpurple --> Processing Dependency: libmp3lame.so.0 for package: gstreamer-plugins-ugly --> Processing Dependency: lame-libs = 3.97-3.lvn5 for package: lame --> Processing Dependency: libkeyutils.so.1 for package: krb5-workstation --> Processing Dependency: libmp3lame.so.0 for package: libquicktime --> Processing Dependency: libkeyutils.so.1 for package: krb5-libs --> Processing Dependency: libmp3lame.so.0 for package: lame --> Processing Dependency: libmp3lame.so.0 for package: vlc --> Processing Dependency: perl(IO::Compress::Gzip) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: perl(IO::Compress::Gzip::Constants) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: perl(LWP::UserAgent) for package: spamassassin --> Processing Dependency: perl(IO::Compress::Base::Common) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: python-ldap for package: sabayon-apply --> Processing Dependency: device-mapper-multipath >= 0.4.7-9 for package: mkinitrd --> Processing Dependency: perl(Compress::Raw::Zlib) >= 2.006 for package: perl-Compress-Zlib --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: yum-metadata-parser for package: yum --> Processing Dependency: libkeyutils.so.1(KEYUTILS_0.3) for package: krb5-libs --> Processing Dependency: libmp3lame.so.0 for package: ffmpeg --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package perl-Compress-Raw-Zlib.i386 0:2.006-1.el5.rf set to be updated ---> Package meanwhile.i386 0:1.0.2-5.el5 set to be updated ---> Package python-ldap.i386 0:2.2.0-2.1 set to be updated ---> Package lame-libs.i386 0:3.97-3.lvn5 set to be updated ---> Package avahi-compat-howl.i386 0:0.6.16-1.el5 set to be updated ---> Package mikmod.i386 0:3.1.6-38.1 set to be updated ---> Package perl-IO-Compress-Zlib.noarch 0:2.006-1.el5.rf set to be updated ---> Package perl-IO-Compress-Base.noarch 0:2.006-1.el5.rf set to be updated ---> Package gamin-python.i386 0:0.1.7-8.el5 set to be updated ---> Package yum-metadata-parser.i386 0:1.0-8.fc6 set to be updated ---> Package keyutils-libs.i386 0:1.2-1.el5 set to be updated ---> Package perl-libwww-perl.noarch 0:5.805-1.1.1 set to be updated ---> Package device-mapper-multipath.i386 0:0.4.7-12.el5 set to be updated --> Running transaction check --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: perl(URI::Heuristic) for package: perl-libwww-perl --> Processing Dependency: perl(URI::URL) for package: perl-libwww-perl --> Processing Dependency: perl(URI::Escape) for package: perl-libwww-perl --> Processing Dependency: perl(URI) for package: perl-libwww-perl --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package perl-URI.noarch 0:1.35-3 set to be updated --> Running transaction check --> Processing Dependency: libdts.so.0 for package: mplayer --> Processing Dependency: libdts.so.0 for package: mplayer-gui --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Finished Dependency Resolution Error: Missing Dependency: libdts.so.0 is needed by package mplayer-gui Error: Missing Dependency: libdts.so.0 is needed by package mplayer [root@XBox ~]# updatedb [root@XBox ~]# whatis updatedb updatedb: nothing appropriate [root@XBox ~]# rpm -qa | grep -i libdts.so.0 [root@XBox ~]# rpm -qa | grep -i libdts [root@XBox ~]# locate libdts /usr/lib/libdts.so.0 /usr/lib/libdts.so.0.0.0 /usr/lib/vlc/audio_filter/libdtstospdif_plugin.so /usr/lib/vlc/codec/libdts_plugin.so /usr/lib/vlc/demux/libdtssys_plugin.so /usr/local/src/xine-lib-1.1.8/src/libdts /usr/local/src/xine-lib-1.1.8/src/libdts/Makefile.am /usr/local/src/xine-lib-1.1.8/src/libdts/Makefile.in /usr/local/src/xine-lib-1.1.8/src/libdts/bitstream.c /usr/local/src/xine-lib-1.1.8/src/libdts/bitstream.h /usr/local/src/xine-lib-1.1.8/src/libdts/downmix.c /usr/local/src/xine-lib-1.1.8/src/libdts/dts_internal.h /usr/local/src/xine-lib-1.1.8/src/libdts/internal-dts.h /usr/local/src/xine-lib-1.1.8/src/libdts/parse.c /usr/local/src/xine-lib-1.1.8/src/libdts/tables.h /usr/local/src/xine-lib-1.1.8/src/libdts/tables_adpcm.h /usr/local/src/xine-lib-1.1.8/src/libdts/tables_fir.h /usr/local/src/xine-lib-1.1.8/src/libdts/tables_huffman.h /usr/local/src/xine-lib-1.1.8/src/libdts/tables_quantization.h /usr/local/src/xine-lib-1.1.8/src/libdts/tables_vq.h /usr/local/src/xine-lib-1.1.8/src/libdts/xine_dts_decoder.c [root@XBox ~]# yum install libdts.so.0 Loading "priorities" plugin Loading "installonlyn" plugin Setting up Install Process Setting up repositories livna 100% |=========================| 1.9 kB 00:00 rpmforge 100% |=========================| 1.1 kB 00:00 extras 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 adobe-linux-i386 100% |=========================| 951 B 00:00 Reading repository metadata in from local files 179 packages excluded due to repository priority protections Parsing package install arguments Nothing to do [root@XBox ~]#

4 4

Mail Volume
by John Hinton 13 Dec '07

13 Dec '07

Thanks Karanbir! It seems you have taken on the task of reducing this volume. Frankly, at 200 or so messages per day it is simply too much and I don't have time to even read the headers. So much is not directly related to CentOS but yet the 'list' has in the past been so good at troubleshooting almost everything. My problem is the items important to me, I deal with my own hardware issues, I don't post to this list with regards to issues with other software, although I have in the past made recommendations... troubleshooting those however doesn't really belong here. Meanwhile, I hope I'm not missing the obvious, the basic issues with running CentOS based packages. I have suggested before that maybe alternative lists would be a good idea. I think a xen list does exist? For sure a CentOS/Hardware list could be of benefit... not really a CentOS item, but best placed in front of those running CentOS. I don't know, I'm just thinking out loud here and adding to what I'm trying to avoid, yet another CentOS thread on an already overloaded IMO list. John Hinton

1 0

ld issue
by Craig White 13 Dec '07

13 Dec '07

I have an annoying little issue that perhaps someone can explain to me. I installed zenoss (very cool, http://www.zenoss.org) and things are OK. when I use emacs or when somethings like a cron job execute, I get notice of an error... emacs: /opt/zenoss/lib/libpng12.so.0: no version information available (required by emacs) or /usr/bin/webalizer: /opt/zenoss/lib/libpng12.so.0: no version information available (required by /usr/lib/libgd.so.2) doing my google bit, I seem to find that this isn't a necessarily a zenoss problem but rather a problem caused by all sorts of software that install a version of the libpng12.so is there some method of fixing this using ld ? Craig

3 3

Samba problems on 5.1
by Sebastian Marten 13 Dec '07

13 Dec '07

Hi list, Since I've upgraded from Version 5.0 to 5.1 i have strange problems with samba. Since 5.1 the connection from a XP client to the samba server disconnect often, especially then i write a file to the share after some idle time. Some informations of my config. The Box is a Samba PDC for a little Windows Domain with a ldap backed. I used this config on Centos 4.x and 5.0 without problems. For 5.1 i installed a new server and copied the config 1:1 to the new hardware. Since then i have this problems. Here a part of the /var/log/messages: smbd[12718]: Connection denied from 0.0.0.0 sonne smbd[12718]: [2007/12/13 15:17:00, 0] lib/util_sock.c:write_data(562) sonne smbd[12718]: write_data: write failure in writing to client 10.5.11.116. Error Connection reset by peer sonne smbd[12718]: [2007/12/13 15:17:00, 0] lib/util_sock.c:send_smb(769) sonne smbd[12718]: Error writing 5 bytes to client. -1. (Connection reset by peer) sonne smbd[31546]: [2007/12/13 15:23:34, 0] lib/util_sock.c:get_peer_addr(1232) sonne smbd[31546]: getpeername failed. Error was Transport endpoint is not connected sonne smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:get_peer_addr(1232) sonne smbd[12802]: getpeername failed. Error was Transport endpoint is not connected smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12802]: getpeername failed. Error was Transport endpoint is not connected smbd[12802]: [2007/12/13 15:23:34, 0] lib/access.c:check_access(327) smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12802]: getpeername failed. Error was Transport endpoint is not connected smbd[12802]: Denied connection from (0.0.0.0) smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12802]: getpeername failed. Error was Transport endpoint is not connected smbd[12802]: Connection denied from 0.0.0.0 smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:write_data(562) smbd[12802]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer smbd[12802]: [2007/12/13 15:23:34, 0] lib/util_sock.c:send_smb(769) smbd[12802]: Error writing 5 bytes to client. -1. (Connection reset by peer) smbd[12810]: [2007/12/13 15:24:41, 0] lib/util_sock.c:read_data(534) smbd[12810]: read_data: read failure for 4 bytes to client 10.5.11.133. Error = Connection reset by peer smbd[12867]: [2007/12/13 15:25:29, 0] lib/smbldap.c:smbldap_open(1014) smbd[12867]: smbldap_open: cannot access LDAP when not root.. smbd[12867]: [2007/12/13 15:25:29, 0] lib/smbldap.c:smbldap_open(1014) smbd[12867]: smbldap_open: cannot access LDAP when not root.. smbd[12910]: [2007/12/13 15:26:29, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12910]: getpeername failed. Error was Transport endpoint is not connected smbd[12910]: [2007/12/13 15:26:29, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12910]: getpeername failed. Error was Transport endpoint is not connected smbd[12910]: [2007/12/13 15:26:29, 0] lib/access.c:check_access(327) smbd[12910]: [2007/12/13 15:26:29, 0] lib/util_sock.c:get_peer_addr(1232) smbd[12910]: getpeername failed. Error was Transport endpoint is not connected smbd[12910]: Denied connection from (0.0.0.0) Maybe this is a part of the problem? smbd[12910]: Denied connection from (0.0.0.0) and this ? smbd[12867]: [2007/12/13 15:25:29, 0] lib/smbldap.c:smbldap_open(1014) smbd[12867]: smbldap_open: cannot access LDAP when not root.. Any suggestions? Thanks, Sebastian

1 0

Re: [CentOS] [OT] Suitable VPN RPM on centos 5?
by Ross S. W. Walker 13 Dec '07

13 Dec '07

I've noticed quite a few of these India consulting companies using the mailing lists to supplement their lack of internal skilled personnel. It really gives me pause when/if I need to consider outsourcing technology work. The fact that these companies are not upfront about their knowledge base and what they are truly capable of handling makes me wonder if this is really the most cost effective way to go. -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Sent: Thu Dec 13 08:34:04 2007 Subject: Re: [CentOS] Suitable VPN RPM on centos 5? Karanbir Singh wrote: Indunil Jayasooriya wrote: Peer IP: 194.237.227.202 <http://194.237.227.202> <http://194.237.227.202> Server IP: 192.168.0.2 <http://192.168.0.2> <http://192.168.0.2> / 255.255.255.255 <http://255.255.255.255> <http://255.255.255.255> Pre-shared key: d769hdsKJ Ike, Phase1: 3des, sha, dh2 Ipsec, Phase2: 3des, sha I hope you realise that by posting such information you have just compromised the site. I'm not sure I entirely understand why this list has become what appears to be backend support for Indunil Jayasooriya's company. -- jeremy ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

Clustering MySQL
by Steve Campbell 13 Dec '07

13 Dec '07

I'm just beginning to consider using the Clustering available with CentOS. We are going to spec out some new hardware, and after reading most of the Clustering manuals, I have a small question about MySQL. I would like to run High Availability MySQL, in other words, similar to how you can run HA HTTPD and the like. The catch seems to be if I run MySQL on an individual server, with common MySQL replication to another server, how do failovers work? I see a real problem with table locking and the like. Is there a way to run multiple MySQL servers that get removed from the cluster as opposed to failing over when using the newer MySQL versions (I am running 3.23 now, so a little behind)? Thanks for any insights. Steve Campbell

9 21

Suitable VPN RPM on centos 5?
by Indunil Jayasooriya 13 Dec '07

13 Dec '07

Hi all, Our customer wants to install a VPN server on Centos 5 box. This is what the remote site says. pls read below. We now have the new firewall & router installed in our office, that supports a secure VPN connection. We need to enter your Peer IP and your Private IP in our device. They indicated xxxx.xxxx.xxxx/24 as format for the Private IP. The settings you need to know at our end are the following (remote site info is given below) Peer IP: 194.237.227.202 Server IP: 192.168.0.2 / 255.255.255.255 Pre-shared key: d769hdsKJ Ike, Phase1: 3des, sha, dh2 Ipsec, Phase2: 3des, sha Now, Could you pls let me know the suitable VPN pkg for the above configurations. Can I use Open VPN? What about Open Swan or Free Swan ? I prefer to install RPMs. Where can I find RPMs for the right pkg? I googled and found some info. Below is the URL to download for OpenSwan. http://www.openswan.org/download/binaries/rhel/3/i386/ It says , RPM s are available for RHEL3. Can I use it for CENTOS 5. (rhel5) or should I use Fedora 4 RPMs. pls see below URl. http://www.openswan.org/download/binaries/fedora/4/i386/ Or I there a RIGHT RPM for CENTOS 5. Any help is highly appreciated -- Thank you Indunil Jayasooriya

4 3

CentOS-announce Digest, Vol 34, Issue 9
by centos-announce-request＠centos.org 13 Dec '07

13 Dec '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:1128 Important CentOS 5 x86_64 autofs Update (Karanbir Singh) 2. CESA-2007:1128 Important CentOS 5 i386 autofs Update (Karanbir Singh) 3. CESA-2007:1129 Important CentOS 4 ia64 autofs5 - security update (Pasi Pirhonen) 4. CESA-2007:1129 Important CentOS 4 s390(x) autofs5 - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 12 Dec 2007 14:56:48 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2007:1128 Important CentOS 5 x86_64 autofs Update To: centos-announce(a)centos.org Message-ID: <20071212145648.GA23628(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2007:1128 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-1128.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 49553c47a0b61fec2e731bbe7e73043e autofs-5.0.1-0.rc2.55.el5.1.x86_64.rpm Source: c28e875dc47f9d20acfac9ff51fe31be autofs-5.0.1-0.rc2.55.el5.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 12 Dec 2007 14:56:48 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2007:1128 Important CentOS 5 i386 autofs Update To: centos-announce(a)centos.org Message-ID: <20071212145648.GA23615(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2007:1128 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-1128.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: a0b788e2cb59158b4d173db59cf3e030 autofs-5.0.1-0.rc2.55.el5.1.i386.rpm Source: c28e875dc47f9d20acfac9ff51fe31be autofs-5.0.1-0.rc2.55.el5.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 12 Dec 2007 21:39:58 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:1129 Important CentOS 4 ia64 autofs5 - security update To: centos-announce(a)centos.org Message-ID: <20071212193958.GQ16424(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:1129 https://rhn.redhat.com/errata/RHSA-2007-1129.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/autofs5-5.0.1-0.rc2.55.c4.1.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Dependency error for perl-Digest-Perl-MD5
by Joseph L. Casale 13 Dec '07

13 Dec '07

I enabled rpmforge on a fresh install as per the centos wiki with priorities and attempted to execute 'yum install perl-Digest-Perl-MD5' and received the following: [root@test ~]# yum install perl-Digest-Perl-MD5 Loading "installonlyn" plugin Loading "priorities" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files 241 packages excluded due to repository priority protections Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package perl-Digest-Perl-MD5.noarch 0:1.8-1.el5.rf set to be updated --> Running transaction check --> Processing Dependency: /usr/bin/false for package: perl-Digest-Perl-MD5 --> Finished Dependency Resolution Error: Missing Dependency: /usr/bin/false is needed by package perl-Digest-Perl-MD5 How do I resolve this? Thanks! jlc

4 6

centos 5.1 and gimp
by Jerry Geis 13 Dec '07

13 Dec '07

When using gimp on centos 5.1 when I select File save it never comes back with a dialog to save the file. Is something broken on gimp? Jerry

3 3

OpenSSL binary compatibility between CentOS 4 and 5
by Ed Schofield 13 Dec '07

13 Dec '07

[Re-sending ...] I would like to ask why upstream and CentOS provide no compat-openssl packages like Novell does in SUSE. We are trying to install binaries for gLite (a huge toolkit for grid computing linked against upstream v4 libraries) on CentOS 5. I was under the impression that this would be possible because v5 is "binary-compatible" with v4. But it seems this "binary compatibility" doesn't extend to OpenSSL. What, then, is the scope of the upstream and CentOS binary compatibility guarantees? (OpenSSL is not yet in the LSB; is this significant?) We will probably want to roll our own compat-openssl packages to provide the relevant libssl and libcrypto .so files, using e.g. compat-openldap as an example. Is this something we could contribute? It doesn't seem to exist yet in any repositories linked from http://wiki.centos.org/HowToContribute/Packages. Assuming it makes sense to contribute this, we'd want to do it right. Could anyone outline steps to make the packages secure and compatible? For example, is it sufficient to roll up the .so files from the CentOS 4.xopenssl packages into rpms and add Requires tags for .so files from compat-glibc? Thanks in advance for any help! -- Ed

3 8

Formating and Mounting Partitions giving problems
by Saurabh Sharma 13 Dec '07

13 Dec '07

3 7

Tons of SNMP ?errors? in /var/log/messages
by Timothy Selivanow 12 Dec '07

12 Dec '07

I'm running up-to-date CentOS 5 w/ Xen. I'm getting tons (tons = 13787 just yesterday, presumably because I have a monitoring system poll every 5 minutes) of log entries of the following: netsnmp_assert index == tmp failed if-mib/data_access/interface.c:467 _access_interface_entry_save_name() and netsnmp_assert rc == 0 failed if-mib/ifTable/ifTable_data_access.c:209 _check_interface_entry_for_updates() When I do an SNMPWalk, everything looks ok (now that IPv6 is back on) on the host doing the walking, but on the other side it is spewing the above messages. I have not been able to find out anything about these. I had IPv6 turned off (by the "alias net-pf-10 off" method), but in troubleshooting these messages I turned it back on (because there were other snmpd messages complaining about unable to find ipv6 entries). Anyone have some knowledge about this? --Tim ___________________________________________________________________ / No one regards what is before his feet; we all gaze at the stars. \ \ -- Quintus Ennius / ------------------------------------------------------------------- \ \ \ \ /\ ( ) .( o ).

2 2

vsifax on Centos 5.1
by Gregory P. Ennis 12 Dec '07

12 Dec '07

All.... I am trying to install vsifax on a 64 bit Centos 5.1 system. The Esker staff have been helpful but no cigar. At first they thought the problem might be related to a 64 bit machine so I tried to install vsifax on a 32 bit Centos 5.1 machine and received the same error. One of their installation scripts is trying to execute a binary called eula which fails. ./eula: cannot execute binary file The tech support of vsifax advised me they had one other customer use Centos 4.5 and succeeded in a vsifax installation. I was hoping whoever had the other vsifax installation might be listening to this list and could give me a hand. Thanks much!!! Greg Ennis

6 14

[OT] Connecting to a Windows server via NFS
by Rick Barnes 12 Dec '07

12 Dec '07

Hello, I realize this may be off-topic for this mailing-list, but at this point I am not sure where the problem is continue troubleshooting. We have a server that has Windows Unified Data Storage Server that is supposed the be able to provide NFS shares. I have attempted to setup a NFS share and I think I have it setup correctly on the server. I have the User Mappings created on the Windows server and share setup. When I mount the share from my CentOS server, I get this: # mount -o rw storage:/share /srv/nfs # ls -l total 1 drwx------ 2 4294967294 4294967294 64 Dec 11 14:46 nfs # ls -l nfs ls: nfs: Permission denied My guess would be permissions on the Windows server, but the test it, I have setup "Everyone" to have full control of the share while I test it. If anyone has experience with SFU and would be will to give me some pointers that would be great. Thanks, Rick

5 4

centos 5.1 and gimp
by Jerry Geis 12 Dec '07

12 Dec '07

> > erry Geis wrote: > >/ When using gimp on centos 5.1 when I select File save > />/ it never comes back with a dialog to save the file. > / > Are you trying to "Save" a file which you opened with gimp (meaning: Is > it already on your hard disk or did you 'acquire' it from a camera or a > scanner)? If it already is on your disk: "Save" saves the file over the > existing one. > > If you want to save it to a new file use "Save as". > > >/ Is something broken on gimp? > / > No. > > I am trying to do save as and a dialog window does not open to let me save anything. I am also trying to select File Open and a dialog box does not pop up to let me open a file. I have straight 5.1 installed. Jerry

2 1

Custom Installer Kernel
by Darryl Ross 12 Dec '07

12 Dec '07

Hi All, I'm trying to remaster the boot.iso image with a custom kernel as the nForce based boards I have are not supported by the stock CentOS 5.0 installer, but they are supported by newer kernels. I need this so I can do kickstarted network installs. Is there a howto available for how to go about this? My google prowess must not be as good as I thought as I've not been able to find anything relevant. Thanks Darryl

3 2

yum freezing when removing old kernel
by Dave 12 Dec '07

12 Dec '07

Hello, Today i ran a yum update and installed kernel 2.6.18.53.1 from centosplus. I then rebooted to ensure i was running it. I was and went to remove the previous kernel and kernel-devel packages v2.6.18.53 also from centosplus. In both cases yum gets to the running transaction check then hangs, i don't get any errors it just sits there. I have to manually kill the yum process to resolve this. This does not happen with any other package add/removals. Any suggestions? Thanks. Dave.

8 14

Kickstart + CentOS 5 = doesn't prompt for network information?
by Ray Van Dolson 12 Dec '07

12 Dec '07

This may be more appropriate for an upstream list. That said... I'm doing kickstart setups of CentOS 5. My kickstart config includes a network configuration item. Depending on options passed at boot-time, the network config item may or may not include a --hostname option, but always specifies eth0. When I do a kickstart install, I notice that even though I am using 'interactive' (basically so the user can override any of the kickstart settings should they need to), the networking screen never pops up and the values from my network get used. If the usr didn't provide a hostname entry on bootup, then localhost.localdomain gets used as the system hostname. I'd like for the user to be able to select the hostname via the installation wizard as they would normally in a non-kickstart install. Perhaps for CentOS 5 kickstarts I should just not include the network option at all in order to make the network configuration screen accessible inside the installer? Ray

2 2

ntpd
by Jason Pyeron 12 Dec '07

12 Dec '07

I am running a server inside of VMWare, and the clock gains ~30 seconds every 1000 seconds or 1.03X. I need to keep the drift under the magic 1000 limit that ntpd kills its self, but despite setting maxpoll really low I get: Dec 11 23:58:14 host ntpd[4909]: kernel time discipline status change 41 Dec 11 23:59:17 host ntpd[4909]: kernel time discipline status change 1 Dec 11 23:59:17 host ntpd[4909]: time correction of -1123 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. /etc/ntp.conf: server time.intranet.pdinc.us maxpoll 7 Ideas? If I cannot get ntpd working, then I will have to resort to a cron * * * * * rdate -s time.intranet.pdinc.us -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Sr. Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited.

6 9

centos 5.1 install on thumbdrive
by Jerry Geis 12 Dec '07

12 Dec '07

Is there anything new on installing centos 5.1 on a 4G thumbdrive? What about the number of writes to the flash? Is that still a problem? Jerry

3 4

CentOS 5.1 local repo HOW??????
by Manuel Enrique Chavez Manzano 12 Dec '07

12 Dec '07

I have a local repo of CentOS 5.0, base and updates, I can't use rsync , so I do it manually, I mean I got the packeages from /var/cache/yum and copied to where the repo is and do createrepo, meanwhile I only have CentOS 5.0 everything was fine, but now I don't know how to create de 5.1 and keep the 5.0 I need some help thanks to all manny -- "Nuestra recompensa se encuentra en el esfuerzo y no en el resultado. Un esfuerzo total es una victoria completa". Mahatma Gandhi (@ @) |------o00o-(_)-o00o----------| |Manuel Enrique Chávez Manzano| |manuel864(a)gmail.com | |manny(a)cmc.cfg.sld.cu | |GNU/LINUX User | |#424754 | |Using CentOS 5 | |-------ooo--ooo--------------|

3 2

Problem with driver disk on amd64
by Fridtjof Busse 12 Dec '07

12 Dec '07

Hi, I have a really strange problem with a driver disk (http://wiki.centos.org/HardwareList/RealTekRTL8111b) on amd64. I'm remotly booting the system via isolinux-files, so I unfortunatly do not have access to relevant logs, all I can see the the primary console/screen. With i386, the driver disk works just fine and I can install via http. But with amd64, the installer complains no driver for the hardware could be found, which again keeps me from installing the system. Due to the lack of RTL8111 hardware, I cannot debug this locally either. Does anybody have an idea what might be wrong? Thanks. -- Fridtjof Busse

2 8

How to disable hal's polling of CD-ROM drive in CentOS 5.1?
by Steve Snyder 12 Dec '07

12 Dec '07

Given that I hardly ever use the CD-ROM drive, it makes no sense to have hal constantly polling it for new media. How can I disable this polling in CentOS 5.1? Thanks.

4 5

module mppe with pptpd causes kernel crash
by David Hláčik 12 Dec '07

12 Dec '07

Hi, configuration of PPTP for windows clients , using MPPE causes kernel crash. It is a known bug which is in bugzilla on RedHat https://bugzilla.redhat.com/show_bug.cgi?id=248716 I was thinking that CentOS 5.1 has allready a kernel patched , but as it seems NOT. Or am i wrong? Thanks David Hlacik

2 1

5.0--> 5.1 lm_sensors "General Parse Error"
by John Thomas 12 Dec '07

12 Dec '07

Problem and solution, not sure if correct After upgrading to 5.1 and restarting, lm_sensors complained "General Parse Error." Google pointed here: http://www.lm-sensors.org/wiki/Devices Where I found this under "SENSOR CHIP DRIVERS - STATUS" AMD --> "Since Kernel 2.6.19" Latest AMD K8 processors have integrated sensors which can be read directly without any additional monitoring chip. Driver contributed by Rudolf Marek. Userspace support available in lm_sensors 2.10.1. Upgrade to lm_sensors 2.10.1 is mandatory, earlier versions of libsensors will fail with a "General parse error" message. My kernel is "2.6.18-53.el5.centos.plus-i686", but I figured I must of gotten me some backported stuff in there (i.e. I'm in over my head). I upgraded to the lm_sensors in ATRPMS testing repo, and the problem went away. (lm_sensors-2.10.5-52.el5) -- Sincerely, John Thomas

3 2

Problems configuring SAMBA share on remote machine
by Andrew Allen 11 Dec '07

11 Dec '07

I'm having problems getting a SAMBA share on a remote (Windows XP) machine to allow me write access to files. I can copy/paste whole files OK from my CentOS 5 box, but can't do any editing of files on the Windows XP machine, which I use as a file server for most of my domestic data (historical reasons for using Windows!). I've tried re-setting permissions to allow write access to the cifs-mounted folders/files, but without success - any suggestions please? Thanks, Andy

3 2

Newer gamin package for CentOS 4.x?
by Bart Schaefer 11 Dec '07

11 Dec '07

The gam_server in gamin-0.1.7-1.2.EL4 occasionally goes into an infinite loop (googling indicates there have been problems with this in gam_server for a long time, I see "another attempt to fix ..." dating from 2004). Does anyone know whether a newer version of gamin has finally fixed this and if so where an RPM or SRPM for the fixed version, suitable for CentOS 4, might be found?

3 2

users & groups
by Hiep Nguyen 11 Dec '07

11 Dec '07

hi all, i just installed centos 5 with minimal options. i don't have gui yet, how do i get to see all users & groups created on my box? thanks, t. hiep

3 3

CentOS 5 sysreport
by Alfred von Campe 11 Dec '07

11 Dec '07

I stumbled across this issue because I requested to install the sysreport package in my kickstart file. Anaconda complains that such a package doesn't exist. There is a bug report about this already (http://bugs.centos.org/view.php?id=2492) but it's certainly a strange situation. 1. Anaconda doesn't think the package sysreport exists 2. yum thinks it exists: # yum list sysreport Loading "installonlyn" plugin Setting up repositories Reading repository metadata in from local files Available Packages sysreport.noarch 1.4.3-13.el5 base 3. But installing with yum fails: # yum install sysreport Loading "installonlyn" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments Package sos - 1.7-9.1.el5.noarch already installed and latest version Nothing to do 4. The sysreport file from the sos package fails to run: # sysreport Traceback (most recent call last): File "/usr/sbin/sysreport", line 31, in ? import sos.policyredhat ImportError: No module named sos.policyredhat 5. But if you extract /usr/sbin/sysreport from the sysreport package using rpm2cpio for instance, it works just fine. So it would be nice if yum would allow installing the sysreport package (see step 3 above) as that would appear to solve all the problems. Alfred

3 4

Re: [CentOS] Looking for a howto site
by Bill Campbell 11 Dec '07

11 Dec '07

On Tue, Dec 11, 2007, Alfredo Perez wrote: >Hi > >I have been googling without success so I thought >to ask the following question to the list: > >I was wondering if any of you know of a site >that shows how to setup a wireless access point >using Centos. You might look at http://www.linux-sxs.org/ Bill -- INTERNET: bill(a)celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way FAX: (206) 232-9186 Mercer Island, WA 98040-0820; (206) 236-1676 If ye love wealth greater than liberty, the tranquillity of servitude greater than the animating contest for freedom, go home from us in peace. We seek not your consul, nor your arms. Crouch down and lick the hand that feeds you. May your chains set lightly upon you; and may posterity forget ye were our countrymen. -- Samuel Adams (American Patriot)

2 2

blue-ray disk mounting
by Jerry Geis 11 Dec '07

11 Dec '07

Is there a way to mount a blue-ray DVD? it says it is a UDF-fs Jerry

2 1

LOTD with CentOS 5
by Michael A. Peters 11 Dec '07

11 Dec '07

Howdy folks - I just moved my laptop from Fedora to CentOS. FC6 was running rather sweet, then they decided to EOL it, and F8 - while it had some nice new features, it was just way to quirky for me. I no longer enjoy re-installing the OS quite so often, hence my move to CentOS. So I installed CentOS 5 on my laptop, and built a bunch of packages, making "yet another" repo for CentOS. These are primarily straight rebuilds (in mock) of Fedora 8 source rpm's - taking care to avoid anything that conflicts with or replaces CentOS packages. I know there are a dozen or so addon repos already - and if you are happy with them, stick with them. My goal was to stay as close to Fedora 8 packaging for these addon packages as possible, benefiting from their packaging guidelines, and also to not replace the stable very well tested CentOS packages. [yjl-misc] does not replace any CentOS packages and has stuff from F8 everything like AbiWord, Gnumeric, Bluefish, BitTorrent, etc. as well as some multimedia related libraries. [yjl-livna] has rebuilds of stuff from rpm.livna.org - mostly multimedia related, including xine and totem-xine. Depends on [yjl-misc]. [yjl-php] has php 5.2.5 and does replace the CentOS php, it should probably only be used if something you are doing requires php 5.2.x. For those interested: http://www.pennywasted.info/centos/yjl.php

1 0

Help with UML editor?
by Scott Ehrlich 11 Dec '07

11 Dec '07

A colleague, using CentOS 5 64-bit, installed by me, asked me for the following assistance: "The site I was trying to get to was http://www.eclipsedownload.com/. I downloaded the EclipseUML free version, but it's obviously not giving me the information I need. I have Java packages in Eclipse that I would like to display in a class diagram to show how they relate to one another. Theoretically, we have/had licenses for the Omondo tool. I believe the studio edition will do what I need. If we have no licenses, I can download the tool I used previously (http://www.soyatec.com/main.php) but that may have been the cause of my Eclipse crashing. Then again, it crashes once a day or so now, so I don't know if the Soyatec's eUML2 tool will make it any worse. If you find another tool I can use or test, please let me know. I could use it as soon as possible." Thanks for any assistance. Scott

2 1

Re: [CentOS] Looking for a howto site
by MHR 11 Dec '07

11 Dec '07

On Dec 11, 2007 8:09 AM, Alfredo Perez <alfredoj69(a)rogers.com> wrote: > Hi > > I have been googling without success so I thought > to ask the following question to the list: > > I was wondering if any of you know of a site > that shows how to setup a wireless access point > using Centos. > Please clarify - are you asking how to use CentOS to access a wireless router, either to set it up or just to use it, or how to use a CentOS machine as a router to be a wireless access point? The former is pretty much just like any other router setup - open a browser to point at the router and set it up like any other (even Windows non-wizard setup). The latter I don't know. Thanks. mhr

1 0

Problem with local base repo
by Robert Moskowitz 11 Dec '07

11 Dec '07

Last night my rsync got some 'new' files for the base repo and new repodata. This morning, I set a server to upgrade from 5 to 5.1 by setting it to access my local base and updates repos. I got the following error: Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for openssh-clients to pack into transaction set. media://1195929637.060433%231/CentOS/openssh-clients-4.3p2-24.el5.i386.rpm: [Errno 4] IOError: <urlopen error unknown url type: media> Trying other mirror. Error: failed to retrieve CentOS/openssh-clients-4.3p2-24.el5.i386.rpm from base error was [Errno 4] IOError: <urlopen error unknown url type: media>

2 3

locate rpm spec files
by Tom Brown 11 Dec '07

11 Dec '07

Hi I _have_ to use the following software versions on CentOS4 and RHEL4 Apache 2.0.53 mod_jk 1.2.22 Tomcat 5.5.9 Java 1.5.0_06 Can anyone point me to the spec files for these that i can use against the source tar balls or better yet a source rpm? thanks!

2 1

unstable kernel after update to CentOS 4.5
by Kai Schaetzl 11 Dec '07

11 Dec '07

On Saturday I finally upgraded a machine from CentOS 4.3 (I think) to 4.5 via yum. Seemed to went fine. However, during the following night /home got mounted read-only because of an EXT3-fs error. The next night happened the same. Also, today, I saw the first-ever kernel crash on this machine. The machine is about three years old or so, went into production two years ago with CentOS 4.1 or so and has been rock stable since then. The fs errors, no kernel crashes, no other "weird" occurences. As the problems are now happening right after upgrading to a new kernel I rather suspect a bug in the kernel (or some module) than a hardware problem. No RAID, no LVM, a few partitions on an IDE disk. I didn't file it as a bug yet. I want to first gather some more information or get some help. Here are some details. Kernel was updated from 2.6.9-34.0.2.EL to 2.6.9-55.0.12.EL. There is not a single package update missing now. Dec 9 04:30:35 nx10 kernel: EXT3-fs error (device hda3): htree_dirblock_to_tree: bad entry in directory #1330023: rec_len % 4 != 0 - offset=10264, inode=808542775, rec_len=13621, name_len=100 Dec 9 04:30:35 nx10 kernel: Aborting journal on device hda3. Dec 9 04:30:35 nx10 kernel: ext3_abort called. Dec 9 04:30:35 nx10 kernel: EXT3-fs error (device hda3): ext3_journal_start_sb: Detected aborted journal Dec 9 04:30:35 nx10 kernel: Remounting filesystem read-only The second error tonight happened about 5 minutes earlier. With exactly the same directory inode. http://www.google.de/search?as_q=centos+rec_len+4+0&hl=de&num=30&btnG=Googl… tory&as_oq=&as_eq=&lr=&cr=&as_ft=i&as_filetype=&as_qdr=all&as_occt=any&as_dt=i&as_sitesearch=&as_rights=&saf e=images shows this error is very scarce (I also tried it with fedora and got a few more). It seems to be related to heavy disk i/o, but only under certain (hardware?) circumstances and may be a bug introduced in some Fedora kernel and this krept into RHEL/CentOS 4.4/4.5. Once this happens that filesystem (in my case /home) is read-only and the machine just hangs when one tries to shutdown (probably when unmounting) or remount ro (for a file check). After a hard reset the automatic fschk in dmesg lists only an few orphan inode cleanups. Also, I found that dmesg delivers me an output of the iptables logging (which is on kern.=debug) before the problem is fixed with a reset. Can I use fsdebug safely on that system while mounted? I'm not familiar with it and just stumbled over a mention of it. I tried it on a machine here on a mounted device and there was no problem. That other machine is in a remote data center, so options are a bit limited. The kernel crash from today starts like this: Dec 10 10:30:01 nx10 kernel: Unable to handle kernel paging request at virtual address 8f38df23 Dec 10 10:30:01 nx10 kernel: printing eip: Dec 10 10:30:01 nx10 kernel: c019190b Dec 10 10:30:01 nx10 kernel: *pde = 00000000 Dec 10 10:30:01 nx10 kernel: Oops: 0000 [#1] Dec 10 10:30:01 nx10 kernel: Modules linked in: ipt_REJECT ipt_limit ipt_state ipt_LOG iptable_filter ip_tables ip_conntrack_ftp ip_conntrack md5 ipv6 autofs4 i2c_dev i2c_core sunrpc dm_mirror dm_mod button battery ac 8139too mii ext3 jbd ata_piix libata sd_mod scsi_mod Dec 10 10:30:01 nx10 kernel: CPU: 0 Dec 10 10:30:01 nx10 kernel: EIP: 0060:[<c019190b>] Not tainted VLI Dec 10 10:30:01 nx10 kernel: EFLAGS: 00010282 (2.6.9-55.0.12.EL) Dec 10 10:30:01 nx10 kernel: EIP is at seq_escape+0x21/0xaa Dec 10 10:30:01 nx10 kernel: eax: 8f38df23 ebx: c0370260 ecx: d35a9151 edx: d35aa000 Dec 10 10:30:01 nx10 kernel: esi: c518c200 edi: c518c200 ebp: c032f9d9 esp: c63d9f28 Dec 10 10:30:01 nx10 kernel: ds: 007b es: 007b ss: 0068 Dec 10 10:30:01 nx10 kernel: Process mv (pid: 16585, threadinfo=c63d9000 task=cee5a1b0) Dec 10 10:30:01 nx10 kernel: Stack: d35aa000 8f38df23 c0370260 c518c200 dfe08982 00000000 c018e0e3 c03702c0 Dec 10 10:30:01 nx10 kernel: c518c200 00000000 dfe08982 c019157f 00000151 00000000 00000400 b7fd5000 Dec 10 10:30:01 nx10 kernel: 0000000c 00000000 0000000b 00000000 c0371300 cea00b80 00000400 c63d9fac Dec 10 10:30:01 nx10 kernel: Call Trace: Dec 10 10:30:01 nx10 kernel: [<c018e0e3>] show_vfsmnt+0x28/0xf5 Dec 10 10:30:01 nx10 kernel: [<c019157f>] seq_read+0x1c3/0x2bd Dec 10 10:30:01 nx10 kernel: [<c016c91b>] vfs_read+0xb6/0xe2 Dec 10 10:30:01 nx10 kernel: [<c016cb30>] sys_read+0x3c/0x62 Dec 10 10:30:01 nx10 kernel: [<c031b777>] syscall_call+0x7/0xb I wonder if I can go back to 2.6.9-34.0.2.EL. Should I expect problems with other updated packages? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

4 8

watchdog on gigabyte motherboard
by Jerry Geis 11 Dec '07

11 Dec '07

All, I have an GigaByte motherboard GA-M61P-S3 and I was wondering if any kernel watchdog processes will work with that? Jerry ----------------------------- /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/softdog.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/ibmasr.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/pcwd_usb.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/pcwd_pci.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/alim7101_wdt.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/wdt_pci.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/w83877f_wdt.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/alim1535_wdt.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/w83627hf_wdt.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/i8xx_tco.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/machzwd.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/w83977f_wdt.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/i6300esb.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/ipmi/ipmi_watchdog.ko

1 0

Re: [CentOS] building a Xen guest image on straight LVM partitions?
by Ross S. W. Walker 11 Dec '07

11 Dec '07

Amos, The quickest way to deploy a Xen VM requires a little more prep work... Use the regular (long) method as discussed. Most use an HVM to do the install but config it as a domU afterward as most installers only work reliably in a fully virtualized environment. Create an LVM based guest for each distribution/OS you plan to use. Then for each Xen guest you want to create take an LVM snapshot of the distribution/OS of choice and use that for the guest. This way guest deployment is very quick and disk space is conserved wisely. You can start with 1 or 2 GB snapshot and as space gets tight in the snapshot add more storage. -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Sent: Tue Dec 11 01:50:01 2007 Subject: Re: [CentOS] building a Xen guest image on straight LVM partitions? On 11/12/2007, Ross S. W. Walker <rwalker(a)medallion.com> wrote: > Here is a good link: http://wiki.rpath.com/wiki/Xen_DomU_Guide Ah and forgot to say "thank you" for the link. Looks useful. Cheers, --Amos _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

Re: Samba Upgrade on Centos 3 Resolved
by Ben Mohilef 11 Dec '07

11 Dec '07

>> bugzilla.redhat.com and provide us with the bug number there? >> >> Thanks, >> >> Ralph >> > >Red Hat Bug 389021 opened on 11-17-07. RedHat released updates for samba late last week: samba-2.2.12-1.21as.8.2 samba-3.0.9-1.3E.14.3 samba-3.0.25b-1.el4_6.4 samba-3.0.25b-1.el5_1.4 They fixed the linux-linux directory panic issue with this update as well as a couple of new security issues. regards, benm

2 1

CentOS-announce Digest, Vol 34, Issue 8
by centos-announce-request＠centos.org 11 Dec '07

11 Dec '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:1114 Critical CentOS 3 ia64 samba - security update (Pasi Pirhonen) 2. CESA-2007:1076 Moderate CentOS 3 ia64 python - security update (Pasi Pirhonen) 3. CESA-2007:1114 Critical CentOS 4 ia64 samba - security update (Pasi Pirhonen) 4. CESA-2007:1076 Moderate CentOS 4 ia64 python - security update (Pasi Pirhonen) 5. CESA-2007:1114 Critical CentOS 3 i386 samba - security and bug fix update (Tru Huynh) 6. CESA-2007:1114 Critical CentOS 3 x86_64 samba - security and bug fix update (Tru Huynh) 7. CESA-2007:1076 Moderate CentOS 3 i386 python - security update (Tru Huynh) 8. CESA-2007:1076 Moderate CentOS 3 x86_64 python - security update (Tru Huynh) 9. CESA-2007:1114 Critical CentOS 3 s390(x) samba - security update (Pasi Pirhonen) 10. CESA-2007:1114 Critical CentOS 4 s390(x) samba - security update (Pasi Pirhonen) 11. CESA-2007:1077-01: Moderate CentOS 2 i386 python security update (John Newbigin) 12. CESA-2007:1114-01: Critical CentOS 2 i386 samba security and bug fix update (John Newbigin) 13. CESA-2007:1132-03: Low CentOS 2 i386 tzdata enhancement update (John Newbigin) 14. CESA-2007:1114 Critical CentOS 5 x86_64 samba Update (Karanbir Singh) 15. CESA-2007:1114 Critical CentOS 5 i386 samba Update (Karanbir Singh) 16. CESA-2007:1076 Moderate CentOS 3 s390(x) python - security update (Pasi Pirhonen) 17. CESA-2007:1076 Moderate CentOS 4 s390(x) python - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 10 Dec 2007 21:26:24 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:1114 Critical CentOS 3 ia64 samba - security update To: centos-announce(a)centos.org Message-ID: <20071210192624.GI16424(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:1114 https://rhn.redhat.com/errata/RHSA-2007-1114.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/samba-3.0.9-1.3E.14.3.ia64.rpm updates/ia64/RPMS/samba-client-3.0.9-1.3E.14.3.ia64.rpm updates/ia64/RPMS/samba-common-3.0.9-1.3E.14.3.ia64.rpm updates/ia64/RPMS/samba-swat-3.0.9-1.3E.14.3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss