- Discuss - lists.centos.org

Stuck at GRUB
by Ugo Bellavance 30 Nov '07

30 Nov '07

Hi, I have a Dell poweredge 400SC here with an LSI scsi card. I installed Centos4 a while ago and put it in a datacenter. I rebooted many weeks after, and the machine didn't come back up. So I went to the datacenter tonight to find out that the server was stuck at "GRUB". Nothing more. So I decided to re-install Centos4. The partitions were already there, so I just made sure partitions were formatted and the install went fine. When I rebooted, "GRUB". I'm at this point and I don't know exactly what I could do to diagnose furthere. Any ideas? Regards, Ugo

7 19

ieee1394 firewire disk unable to see or mount [SEC=UNCLASSIFIED]
by Lawson Hanson 30 Nov '07

30 Nov '07

We have some LaCie 1 TB external disks which work fine on other Linux servers (running Red Hat 9, and Ubuntu 7.04), but which fail to be seen on our CentOS 4.3 system with kernel 2.6.9-34.107.plus.c4smp The interface card is a Sunix 64 bit Firewire 800 ieee1394b adapter plugged into a PCI slot in our Linux server, which is a Tyan Thunder K8SD Pro S2882-D, 64 bit AMD Opteron CPU Using "cat" to examine the "/proc/scsi/scsi" information shows our system hard disk and internal RAID array: cat /proc/scsi/scsi ------------------- Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD360GD-00FL Rev: 33.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: AMCC Model: 9550SX-8LP DISK Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 03 I have found various items in the centos list archives, but none of these has provided a definitive solution; I have used commands such as "lspci", and "lsmod" to ensure that the system sees the firewire card, and has iee1394 and other modules loaded: lspci | grep 1394 ----------------- 01:03.0 Firewire (IEEE 1394): Texas Instruments TSB82AA2 \ IEEE-1394b Link Layer Controller (rev 01) lsmod | egrep '1394|sbp2|s.*_mod' --------------------------------- sbp2 26825 0 ohci1394 36953 0 ieee1394 124601 2 sbp2,ohci1394 sd_mod 19393 7 scsi_mod 140561 4 sbp2,3w_9xxx,libata,sd_mod Somewhere I found a note about trying the "serialize_io=1" option with the "sbp2" module, and now have tried that, but still have no joy: dmesg | grep sbp ---------------- sbp2: $Rev: 1219 $ Ben Collins <bcollins(a)debian.org> sbp2: $Rev: 1219 $ Ben Collins <bcollins(a)debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) The "1394" messages in "dmesg" are: dmesg | grep 1394 ----------------- ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins(a)debian.org> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] \ MMIO=[fc7fe800-fc7fefff] Max Packet=[4096] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080028560000470a] ieee1394: Error parsing configrom for node 0-01:1023 ieee1394: The root node is not cycle master capable; \ selecting a new root node and resetting... ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Error parsing configrom for node 0-01:1023 ieee1394: The root node is not cycle master capable; \ selecting a new root node and resetting... ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Error parsing configrom for node 0-01:1023 ieee1394: The root node is not cycle master capable; \ selecting a new root node and resetting... ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) If anyone can suggest how I might proceed to get our LaCie disks to run on the Firewire card under CentOS 4.3, I shall be delighted to see what I need to do, thanks Best regards, Lawson Hanson ------ Climate Change Group Centre for Australian Weather and Climate Research

1 0

Re: [CentOS] CleanLog.h
by Ross S. W. Walker 30 Nov '07

30 Nov '07

Find out how they got in and make sure that hole is fixed. Do an rpm verify on all installed packages (excluding configs), reinstall the rpms that fail the verify. Find all binaries that are not accountable in rpm and nuke them. Harden your host with selinux and audit, keep audit logs of all changes to binary files and essential configs and make sure the audit logs are immutable. Keep an eye on the system for a while to make sure you haven't missed anything. Keep LVM snapshots of your OS LVs. -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Sent: Thu Nov 29 17:43:44 2007 Subject: [CentOS] CleanLog.h Sad to say one of my file servers was exploited and used to run a Phishing scam. Have identified subject virus amongst other things. It appears twice in a virus scan; /sbin/z (which I assume can just be deleted) and /sys/bus/serio/drivers/atkbd/description. The latter file is also present in identical uninfected machines. I have been unable to open the file, even with root privileges, although it appears to be a text file. Any suggestions on how to proceed appreciated. Guess I could delete it and copy over the file from an identical machine. Thanks in advance, B.J. CentOS 5.0, Linux 2.6.18-8.1.15.el5 x86_64 16:26:48 up 10:46, 1 user, load average: 0.07, 0.08, 0.04 ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

3 2

Re: [CentOS] special tricks for developers box on centos 5
by Ross S. W. Walker 29 Nov '07

29 Nov '07

More importantly, mount your dev filesys with atimes disabled and ext3 indexing on. Use tmpfs for /tmp, /usr/tmp, /var/tmp, it uses swappable ram filesys which helps a lot too. Make sure nothing gets put in those tmp dirs that needs to persist across a reboot and limit the max size each can take to 1/2 total memory. More memory... As far as background jobs go, reschedule them for day time hours when your asleep ;-) -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Sent: Thu Nov 29 18:26:56 2007 Subject: Re: [CentOS] special tricks for developers box on centos 5 Jerry, --- Jerry Geis <geisj(a)pagestation.com> wrote: > I was just wondering if there are special tricks > people do > that compile A LOT on centos? Do RAM disks help or > something else I dont > about that minimizes your compile time? I presently > have and AMD x2 > 4800+ with 2GIG ram. > > Just curious if I can reduce any more time out of my > compiles. Watch out for background processes that steal resources: Move /etc/cron.daily/ mlocate prelink to /etc/cron.weekly Remove /etc/cron.daily/makewhatis and let it only run weekly (its already in weekly) Open /etc/updatedb and tune it for your system: add ntfs-3g or vfat to prunefs If you have any mock partitions, add that to prunepath -- Mark My C5 repo with RequestTracker http://www.tlviewer.org/centos ____________________________________________________________________________________ Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now. http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

SNMP Log entries
by Enyo 29 Nov '07

29 Nov '07

Hi, Does anyone know how to prevent snmpd from writing the below into /var/log/messages/ Nov 29 19:35:02 serenity snmpd[2287]: Received SNMP packet(s) from UDP: [127.0.0.1]:34309 Nov 29 19:35:02 serenity snmpd[2287]: Connection from UDP: [127.0.0.1]:34309 Nov 29 19:35:02 serenity last message repeated 7 times Nov 29 19:40:02 serenity snmpd[2287]: Connection from UDP: [127.0.0.1]:34313 Nov 29 19:40:02 serenity snmpd[2287]: Received SNMP packet(s) from UDP: [127.0.0.1]:34313 Nov 29 19:40:02 serenity snmpd[2287]: Connection from UDP: [127.0.0.1]:34313 Nov 29 19:40:02 serenity last message repeated 7 times Nov 29 19:45:02 serenity snmpd[2287]: Connection from UDP: [127.0.0.1]:34319 Nov 29 19:45:02 serenity snmpd[2287]: Received SNMP packet(s) from UDP: [127.0.0.1]:34319 Nov 29 19:45:02 serenity snmpd[2287]: Connection from UDP: [127.0.0.1]:34319 We query the server to gain load stats etc every 5 mins and this is causing /var/log/messages to fill up pretty quickly/ I do not care about seeing normal connection info from snmpd, but retaining logging for other info such as malformed packets, bad community strings etc is of interest. Thanks

2 1

RAID, LVM, extra disks...
by Ugo Bellavance 29 Nov '07

29 Nov '07

Hi, This is my current config: /dev/md0 -> 200 MB -> sda1 + sdd1 -> /boot /dev/md1 -> 36 GB -> sda2 + sdd2 -> form VolGroup00 with md2 /dev/md2 -> 18 GB -> sdb1 + sde1 -> form VolGroup00 with md1 sda,sdd -> 36 GB 10k SCSI HDDs sdb,sde -> 18 GB 10k SCSI HDDs I have added 2 36 GB 10K SCSI drives in it, they are detected as sdc and sdf. What should I do if I want to optimize disk space? The simplest solution would be to create /dev/md3 out of sdc1 and sdf1, and add it to the VG, and increase the size of my /vz logical volume. However, if I could convert that to a RAID5 (it could be possible to re-install, but I would rather not), I could have 6 drives in RAID5, so I'd have 5x36 GB (180) of space available total, instead of 3*36 (108). Also, please note that this is a Dual PIII 1.2 Tualatin. I'm runing OpenVZ with virtual machines that are not really CPU expensive, but I would not like to see my processors spending most of their time computing XORs for the RAID5. Any suggestions/tips welcome. Regards, Ugo

3 9

32-bit xen pv domU on 64-bit dom0?
by Amos Shapira 29 Nov '07

29 Nov '07

Hello, I'm hitting a problem with heartbeat which might be related to the use of x86_64. My test system is CentOS 5 Xen DomU x86_64 under CentOS 5 Dom0. Can I run i386 CentOS 5 DomU under x86_64 Dom0? Thanks, --Amos

1 0

RE: [CentOS] Re: Mail Server Install
by James D. Parra 29 Nov '07

29 Nov '07

-----Original Message----- From: Scott Silva [mailto:ssilva@sgvwater.com] Sent: Wednesday, November 28, 2007 10:37 AM To: centos(a)centos.org Subject: [CentOS] Re: Mail Server Install on 11/28/2007 10:24 AM Alain Spineux spake the following: > On Nov 28, 2007 2:54 AM, Jun Salen <nokijun(a)yahoo.com> wrote: >> Hi Friends, >> >> I am planning to upgrade my mail server from CentOS4.5 to CentOS5. By this, I also planned to replace my postfix mail server with Scalix although the community edition limit me to just 25 premium user, I think it is suffice for us with the remaining user as standard user (with approx. <> 100 users total). Is there a catch on using Scalix based on your experience. I see that Horde is available from Dag's repository, do you think it is better for me to use that instead? Is there anyone using it that may share their gotchas and good points from their experience for me to prepare and be ready. Thank you in advance. > > You could take a look at kolab. > Their is no native binary for package for centos, but the openpkg > packaging work well on centos-5. > > All user are premium user on kolab and are not limited :-) > Except Outlook users, which must pay to play through the toltec connector. ~~~~~ My personal experience with Scalix is pretty bad. Administering it is cumbersome and trying to find a user's mailbox is problematic, not to mention other issues. Perhaps your experience would be better. ~James

6 11

Deleting files from dump?
by Scott Ehrlich 29 Nov '07

29 Nov '07

Is it possible to delete a file from dump? I saved it in one dump archive, and want to save space by deleting it from the others. Thanks. Scott

2 1

lvresize --resizefs
by Ugo Bellavance 29 Nov '07

29 Nov '07

Hi, There is a difference between the help of lvresize and its man page. In the manpage, there is nothing about the -r or --resizefs function. Centos4. [root@serv01 ~]# lvresize Please specify either size or extents (not both) lvresize: Resize a logical volume lvresize [-A|--autobackup y|n] [--alloc AllocationPolicy] [-d|--debug] [-h|--help] [-i|--stripes Stripes [-I|--stripesize StripeSize]] {-l|--extents [+|-]LogicalExtentsNumber[%{VG|LV|FREE}] | -L|--size [+|-]LogicalVolumeSize[kKmMgGtTpPeE]} [-n|--nofsck] [-r|--resizefs] [-t|--test] [--type VolumeType] [-v|--verbose] [--version] LogicalVolume[Path] [ PhysicalVolumePath... ]

2 2

Re: [CentOS] Announcing the CentOS on Laptops initiative
by David G. Miller 29 Nov '07

29 Nov '07

"Bart Schaefer" <barton.schaefer(a)gmail.com> wrote: > On Nov 28, 2007 7:23 AM, David G. Miller <dave(a)davenjudy.org> wrote: >> > Now everything (sort of) "just works (TM)". I say "sort >> > of" because I'm still running ndiswrapper since every time I've tried >> > the bcm43xx kernel module it hasn't worked with my WAP. >> > > I've had a similar experience with my HP. Did you manage to get > NetworkManager and ndiswrapper to co-operate? I had to disable > NetworkManager, but it'd be nice to use the profiles rather than > reconfigure the network when changing access points. I had it working for a while but it kept getting in the way when I was trying to get the bcm43xx module working. I went back to my old system of just having eth0 for the wired connection and eth1 for wireless and user controllable. Other than my home network, I don't have any other wireless networks that I connect to on a regular basis so this approach lets me manually control what happens when I'm trying to connect to some oddball network that I've never seen before and probably won't see again. One thing I remember about getting NetworkManager and the piece that handles keys (not gnome-keyring; don't remember the name right now and the laptop is off) was to tell that piece to use the generic wireless kernel API instead of the ndiswrapper control interface. Seems weird but it worked. If you need more information, I can fire up the laptop at some point. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

reasons for using CentOS in business environments
by Rogelio 29 Nov '07

29 Nov '07

My apologies if this question has been previously answered, but could anyone here provide me with resources that I might use to help build a case for exclusively using CentOS in an enterprise environment? (Approximately 200 servers) Long story short, I've used a little of everything out there (Gentoo/Debian/*BSD/Slackware) and have a fairly good overall strategy of how they all work (all of them have lived on my laptop at one time or another over the last 10 years or so), but I'm now looking for solid business reasons that I can present to the CxO types of a company to show them that CentOS is probably where they'd like to look. Reasons thus far I've come up with include: --free *and* "fully" (at least, in my experience) compatible with RHEL --fairly stable (I don't have problems unless I start mixing repos) --yum packages (almost as cool as Debian! Ok, I'm biased...or maybe I don't know how to properly use yum?) Any other suggestions / tips I might add to my list would be greatly appreciated!

8 7

cisco vpn client on linux
by Jerry Geis 29 Nov '07

29 Nov '07

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry

6 5

CentOS-announce Digest, Vol 33, Issue 14
by centos-announce-request＠centos.org 29 Nov '07

29 Nov '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:1084 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Nov 2007 21:08:58 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:1084 Critical CentOS 3 ia64 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20071128190858.GF18540(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:1084 https://rhn.redhat.com/errata/RHSA-2007-1084.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/seamonkey-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-chat-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-devel-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-dom-inspector-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-js-debugger-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-mail-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-devel-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-1.0.9-0.7.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-devel-1.0.9-0.7.el3.centos3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

heartbeat segfaulting on CentOS 5 x86_64 (xen guest)
by Amos Shapira 29 Nov '07

29 Nov '07

Hello, I'm having trouble running two linux-ha heartbeat nodes and have them talk to each other (or actually one of the nodes just doesn't work even for local basic admin stuff, including a simple "service heartbeat stop") and apparently it all boils down to the following Bug in Linux-HA: http://developerbugs.linux-foundation.org//show_bug.cgi?id=1678 I'm persuing this with the linux-ha users mailing list but the bug doesn't seem to get much attention from the linux-ha developers and I was wondering whether anyone here has stumbled on it and have a work around. The strange thing is that the two noes are identical - both are CentOS 5 PV Xen guests on the same CentOS 5 Dom0 host and exactly the same packages and config files - but one of them seems to work perfectly while the other doesn't. Anyone? Thanks, --Amos

1 0

RE: [CentOS] Centos 5.1 distro: How to upgrade 5.0 to 5.1 with yum??
by Plant, Dean 29 Nov '07

29 Nov '07

Robinson Tiemuqinke wrote: > --- Jancio Wodnik <jancio_wodnik(a)wp.pl> wrote: > >> Robinson Tiemuqinke pisze: >>> >>> Currently I download the Centos 5.0 upgrade packages from mirror >>> sites on Internet (.../centos/5/updates/{SRPMS,i386,x86_64}/...), >>> with the arrival of Centos 5.1, are the existing Centos 5.0 >>> update packages will be removed in honor of Centos 5.1 >>> updates? or it will stay? And how about the Centos >>> 5.1's default packages in distro? >>> >>> Give an example here: >>> >>> 2.6.18-8.1.15 version kernel is the most recently >>> updated kernel for Centos 5.0 distro, if the Centos >>> 5.1 distro comes with 2.6.18-8.1.10000 kernel and in >>> the first few weeks there are no kernel updates for >>> 5.1, then how can I upgrade my kernel to >>> 2.6.18-8.1.10000 naturally -- will the >>> 2.6.18-8.1.10000 shows in the same update sources >>> >> > directories(.../centos/5/updates/{SRPMS,i386,x86_64/...)? >>> >>> A similar question is: are the update diretories >>> contains only updates for 5.1 distro, or both 5.0 and >>> 5.1? >>> >>> Any clarifications are greatly appreciated. >>> >> It's simply. All things from 5.0 to 5.1 will be done automatically >> via yum (as standard update) or in rare situation can be possibly >> depedency problem (when mixing different repo ?). >> >> So don't worry. if you are really affraid - update >> only one box and test >> ... test ... then update the rest. >> >> I must say. In Centos 4 world all updates from 1 to 2 to 3 ... to 5 >> were go in smooth way. >> >> Regards, >> >> Irens >> > > I have had my local 5.0 update repository > (.../centos/5.0/updates/{SRPMS,i386,x86_64}/...) setup > and used it for my 900+ boxes's daily upgrade already. > The repository is synchronized with official Internet > mirrors daily to keep it current. > > My major concerns is: After the 5.1 is released, the > update channel/directory > (.../centos/5.1/updates/{SRPMS,i386,x86_64}/...) may > change to contain only updates for 5.1 > snapshot/release, not updates since 5.0. If so, then > all my Centos 5.0 boxes will suffer. > > I have the serious concern because most Centos Mirror > sites on Internet ONLY keep the updates for latest > release/snapshot, not holds updates since the > base(3.0, 4.0, 5.0 etc) release. This seems like a big > problem if we would like to install from base|initial > release (3.0, 4.0, 5.0) continuously and then use a > single up-to-date update/ repository to upgrade > machines to current level. > > For example, at Stanford's Centos 4 mirror site, only > 4.5 is mirrored while all the other > 4.0/4.1/4.2/4.3/4.4 are not. and in the updates/ > directory only updates for 4.5 are kept there. If the > same is true for all other sites honoring 5.0 series, > then I think I will definitely get screwed If I tried > to keep on using base 5.0 and daily synced updates/ > (exactly the same) for upgrade. > > Any mirror sites hold updates since base release? Or I > have to keep on adding more repositories to yum's > configuration? 5.0 distro, 5.0 updates, 5.1 distro, > 5.1 updates, 5.2 distro, 5.2 updates. etc. If so, then > it is too low-performanced and erro-prone. > > Any one have experience on upgrade Centos 4 releases > from 4.0 to 4.5 can shed a light on this? > > Thanks a lot. > > --Robinson > > If you remove the point release numbers from your update paths you do not need the old versions. If you really need the old updates use http://vault.centos.org/ >From http://mirror.centos.org/centos-4/4.4/readme ------------------------------------------------------------------------ This directory (and version of CentOS) is depreciated. For normal users, you should use /4/ and not /4.4/ in your path. Please see this FAQ concerning the CentOS release scheme: http://www.centos.org/modules/smartfaq/faq.php?faqid=34 If you know what you are doing, and absolutely want to remain at the 4.4 level, go to http://vault.centos.org/ for packages. ------------------------------------------------------------------------ To simplfy our yum configuration I disable all the repo files in /etc/yum.repos.d and call the yum configuration from a local web server in yum.conf by using the include statement. One change on the web server changes the yum configuration on all CentOS machines. In the yum.conf I add # Site yum files include=http://ourserver.ourdomain.com/centos/yum/centos.repo include=http://ourserver.ourdomain.com/centos/yum/centos-updates.repo The centos.repo looks like this, [base] name=CentOS-$releasever - Base baseurl=http://ourserver.ourdomain.com/centos/$releasever/os/$basearch/ enabled=1 gpgcheck=1 And the centos-updates.repo looks like this, [updates-released] name=CentOS-$releasever - Updates baseurl=http://ourserver.ourdomain.com/centos/$releasever/updates/$basea rch/ enabled=1 gpgcheck=1 [custom-repo] name=CentOS-$releasever - Custom-rpms baseurl=http://ourserver.ourdomain.com/centos/$releasever/customrepo/ enabled=1 gpgcheck=1 Hope this helps. Dean

1 0

OT: virtual server hosting recomendation
by David Hrbáč 29 Nov '07

29 Nov '07

Hi, we are in need of a new (virtual) server based in US. Any hosting recommendation? Thanks, David Hrbáč

4 4

2 DHCP server in one subnet
by Fajar Priyanto 29 Nov '07

29 Nov '07

Hello all, In the network there is already a W2K server serving as DHCP server for the network. Then we want to implement LTSP, so we need to setup another DHCP server, right? Due to unexpected reason (little by little migration of w98 clients to LTSP), we need to keep the W2K server running in that network. Can we then have 2 DHCP server in the same subnet, only serving pre-determine clients using mac address? Any clue on how to setup the dhcpd.conf? Thank you very much. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 20:16:32 up 14 min, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn.

4 5

Severe VMware slowdown
by Mark Hull-Richter 29 Nov '07

29 Nov '07

In the last few days, I have noticed a drastic slowdown in my VMware Windows guest OS.. I recently bit the bullet and upgraded it from XP SP1 to SP2, and that seemed to work fine for quite a few days. The two major changes I made to the system recently were: 1) The most recent update from CentOS (can't remember which one, but it was within the last two weekd for 5.0). 2) Adding another VM guest OS, this one a CentOS 5.0 guest. What happens is, usually when I click the mouse in the Windows window, the system hangs up completely for some period of time that usually exceeds four minutes. Thereafter, once the VM is "running," it will occasionally just stop when I am transitioning into the VM from elsewhere. I verified this using the CentOS system clock - last night it stopped at 23:01 and still read 23:01 when my cell phone, which is usually dead on in sync with the system clock, read 11:04pm. I cut back on the amount of memory allowed to the Windows VM (768MB, down from 1GB) and that seemed to help a little, but I have 2GB and I'm thinking that this should not be a problem. Any input would be helpful. Thanks. mhr P.S.: Now I'm thinking that my earlier remark about applications was a bit overstated....

3 6

How to import/install the key for signing pxljr-1.1-1.i386.rpm
by Andrew Allen 28 Nov '07

28 Nov '07

How do I import and install the key for signing the above rpm (driver for HP Colour laserjet 3500 printer) which I've downloaded from the kde repo? - I want to use yum localinstall, but when I do I get the message 'package not signed'. Thanks for help, Andy

3 3

Dell T3400 on CentOS 3.X
by Mark Belanger 28 Nov '07

28 Nov '07

For reasons I'd rather not go into, I need to get CentOS 3.anything on a Dell T3400: http://www.dell.com/content/products/productdetails.aspx/precn_t3400?c=us&l… The hard drive is not seen at install time. Can someone point me in the right direction to see if this is possible and how to proceed? Regards, -mark

2 1

Installing HP Color Laserjet 3500 printer in CentOS 5
by Andrew Allen 28 Nov '07

28 Nov '07

OK, I've downloaded and installed the driver (pxljr-1.1-1.i386.rpm), and the ppd file (HP-Color_LaserJet_3550-pxljr.ppd) in /etc/cups/ppd. Now I'm trying to set up the printer, connected to the network via a JetDirect printer server at location 192.168.0.200. Trouble is, I'm really not sure about all the settings in Printer Configuration - specifically, what should the Device URI be - at the moment, it says socket://HPColourLaserjet3500:9100, but I'm not sure if this is correct, but it doesn't seem to be because it won't print a test page. Any help much appreciated, Thanks, Andy

2 2

Adobe products under Linux?
by Scott Ehrlich 28 Nov '07

28 Nov '07

Also sent to Codeweavers - [what is this list's insights?] I have a 32 GB, dual quad-core desktop machine and was considering 32-bit Windows XP w/SP2, but discovered it only supports up to 4 GB RAM, so that idea is shot. Next in line is 64-bit CentOS 5. The major need for Windows would be very active use of Adobe Acrobat 8, Photoshop CS3, and Illustrator CS3. There may also be the need to copy/transfer information among Matlab, Mathematica, and Microsoft-based applications, from Office 2003 to the above-mentioned ones. Do you support these, and how complete is your product line for 64-bit CentOS 5? Based on your answer, I'll know whether to go with a virtual machine-based solution, which means a Windows VM, or can remain Linux-only, with your solution. Thank you very much. Scott

15 19

libgd question on CentOS (in order to get PerfParse working with Nagios)
by Rogelio 28 Nov '07

28 Nov '07

Do I have the necessary gd packages installed on my CentOS 4 box? rpm -qa | grep gd gdk-pixbuf-0.22.0-17.el4.3 gdk-pixbuf-devel-0.22.0-17.el4.3 gdbm-1.8.0-24 gdbm-devel-1.8.0-24 gd-devel-2.0.28-5.4E gd-2.0.28-5.4E gdm-2.6.0.5-7.rhel4.15 sysklogd-1.4.1-26_EL I'm trying to install PerfParser (./compile->make && make install), but I'm getting a "gImageString error", which according to this FAQ (http://perfparse.de/tiki-view_faq.php?faqId=1) means: "The gd library is probably not installed yet on your system. Or you are missing the development package such as libgd-devel or libgd-dev." I "yum search" 'd for libdg and found the following. Is this what I install? libgdiplus.i386 1.0.5-1.2.el4.rf rpmforge Matched from: libgdiplus libgdiplus is an Open Source implementation of the GDI+ API, it is part of the Mono Project libgdiplus-devel.i386 1.0.5-1.2.el4.rf rpmforge Matched from: libgdiplus-devel Header files, libraries and development documentation for libgdiplus This package contains the header files, static libraries and development documentation for libgdiplus. If you like to develop programs using libgdiplus, you will need to install libgdiplus-devel.

2 1

sysstat out put
by Centos 28 Nov '07

28 Nov '07

Hello in our Sysstat output we have the following lines, any one knows what does it mean ? 00:00:01 CPU i000/s i008/s i009/s i014/s i066/s i074/s i082/s i090/s 01:20:01 0 248.09 0.00 0.00 0.00 0.00 0.00 0.04 91.06 01:20:01 1 255.06 0.00 0.00 4.59 0.00 0.00 0.09 0.00 01:20:01 2 245.37 0.00 0.00 4.41 0.00 0.00 0.11 0.00 01:20:01 3 272.07 0.00 0.00 0.15 0.00 0.00 0.12 0.00 01:30:01 0 255.40 0.00 0.00 0.00 0.00 0.00 0.07 11.92 01:30:01 1 255.05 0.00 0.00 4.56 0.00 0.00 0.00 0.00 01:30:01 2 255.06 0.00 0.00 4.56 0.00 0.00 0.23 0.00 01:30:01 3 255.05 0.00 0.00 0.00 0.00 0.00 0.12 0.00 Thanks for help

2 1

mod_gnutls on Centos 4
by David Hrbáč 28 Nov '07

28 Nov '07

Hi, as you might know I have created mod_gnutls for CentOS4 a few months ago. http://fs12.vsb.cz/hrb33/el4/hrb/stable/i386/RPMS/repodata/repoview/mod_gnu… http://fs12.vsb.cz/hrb33/el4/hrb/stable/i386/RPMS/repodata/repoview/gnutls-… http://fs12.vsb.cz/hrb33/el4/hrb/stable/i386/RPMS/repodata/repoview/gnutls-… http://fs12.vsb.cz/hrb33/el4/hrb/stable/i386/RPMS/repodata/repoview/gnutls-… I'd like to ask if someone is using it? It seems to me that it's not able to handle higher load. When user hits F5 there are a few httpd processes running the full cpu. Strace shows nothing, server-status marks them "reading". :o( It seems to me that when user breaks/stops the request httpd breaks. Any experiences? Thanks, David

1 0

Help with file descriptor
by Guy Boisvert 28 Nov '07

28 Nov '07

Hi all! I have a problem with CentOS 4.4 and Communigate Pro 5.0.9. As our user number grows, we are seeing "too many files open" error messages in Communigate logs. I spoke with Communigate tech support and they asked me to increase the number of file descriptors which i did. I put 128000 as a script i made to check Communigate open files reported as high as 99000. As i checked the Communigate log file, it reported that it "sees" 1024 "available" file descriptors. Reporting that to Communigate tech support, the guy answered: "CommuniGate gets this number via getdtablesize() system call. Probably in CentOS the table has a fixed size so you need to recompile the kernel to expand it. Try upgrading CentOS to 4.5 (or whatever later version is available) " I'm a little afraid of upgrading the server right away, i don't want to worsen the problem. Or maybe it's safe to do it. I dunno. Is there anybody on the list that can comment on what the Communigate tech support guy said about the "getdtablesize" thing ? Thanks in advance! Guy Boisvert

1 0

RedHat 4.6
by Stephen Harris 28 Nov '07

28 Nov '07

I've either been blind or everyone else is or... but I just noticed RedHat 4 Update 6 is out! So when's the next CentOS release? (grins, ducks and runs very very very fast!) -- rgds Stephen

3 2

Mail Server Install
by Jun Salen 28 Nov '07

28 Nov '07

Hi Friends, I am planning to upgrade my mail server from CentOS4.5 to CentOS5. By this, I also planned to replace my postfix mail server with Scalix although the community edition limit me to just 25 premium user, I think it is suffice for us with the remaining user as standard user (with approx. <> 100 users total). Is there a catch on using Scalix based on your experience. I see that Horde is available from Dag's repository, do you think it is better for me to use that instead? Is there anyone using it that may share their gotchas and good points from their experience for me to prepare and be ready. Thank you in advance. junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

5 6

Re: [CentOS] Announcing the CentOS on Laptops initiative
by David G. Miller 28 Nov '07

28 Nov '07

"Matt Shields" <mattboston(a)gmail.com> wrote: > On Nov 27, 2007 10:37 AM, Count Of Dracula <countofdracula(a)gmail.com> wrote: > >> > On 11/26/07, Dag Wieers <dag(a)centos.org> wrote: >> >>> > > Hi all, >>> > > >>> > > I would like to announce a CentOS on Laptops initiative. The aim is to >>> > > allow everybody in the community (and on this mailinglist) to document >>> > > their own experience with CentOS on their laptop (on the CentOS wiki). >>> > > >>> > > >>> > > The goal of this initiative consists of 2 parts: >>> > > >>> > > - help and convince people with their own CentOS on laptop installation >>> >> > >> > Are you nuts? CentOS on laptop? Why you want to kill torture people in >> > such a cruel way? >> > >> > Joy >> > > Because some people may actually want to run a stable OS that will > have patches released for quite a while. Fedora is not an option for > most business people who rely on their laptops every day. Torture is > installing the latest Fedora every 6 months and hoping something > doesn't break. Some would say Fedora users are nuts. I think you perfectly described my experience with Fedora on my laptop (HP zv6015). I managed to coerce Fedora 4 onto it (even the install was wonky until I learned about nofb). I got tired of chasing the latest Fedora release and moved to CentOS 5 when it was released. I built a custom kernel for a while so the card reader would work until enough fixes got back ported that the stock kernel would read the SD card my camera uses. Now everything (sort of) "just works (TM)". I say "sort of" because I'm still running ndiswrapper since every time I've tried the bcm43xx kernel module it hasn't worked with my WAP. With CentOS 5 the laptop seems to be as stable as my desktop. About the only time I ever boot the Windows XP Home partition is if there's a BIOS update or something that HP doesn't release any other way. Can't imagine torturing myself with XP. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

2 1

rpm / yum / repo wranging tools?
by Rogelio 28 Nov '07

28 Nov '07

I'm inheriting dozens of CentOS servers and am looking for various tools to help me wrangle the rpm / yum / repo madness. Any tools you might suggest for me to look into would be greatly appreciated!

2 1

X windows
by Hiep Nguyen 28 Nov '07

28 Nov '07

hi all, i just finished install (minimal) centos 5. how do i use yum to install X windows so that i can use gui. thanks, T. Hiep

4 5

Using a local mirror?
by Jason Pyeron 28 Nov '07

28 Nov '07

We have a rsync'ed copy of the centos distro. We want to point our local machines at that, what is our next step? -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Sr. Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited.

4 8

Re: [CentOS] Adobe products under Linux?
by Ross S. W. Walker 27 Nov '07

27 Nov '07

You could try crossover office, it's reported to work with several windows apps from adobe. Photoshop I believe works. -Ross -----Original Message----- From: centos-bounces(a)centos.org <centos-bounces(a)centos.org> To: centos(a)centos.org <centos(a)centos.org> Sent: Fri Nov 23 17:03:10 2007 Subject: [CentOS] Adobe products under Linux? Also sent to Codeweavers - [what is this list's insights?] I have a 32 GB, dual quad-core desktop machine and was considering 32-bit Windows XP w/SP2, but discovered it only supports up to 4 GB RAM, so that idea is shot. Next in line is 64-bit CentOS 5. The major need for Windows would be very active use of Adobe Acrobat 8, Photoshop CS3, and Illustrator CS3. There may also be the need to copy/transfer information among Matlab, Mathematica, and Microsoft-based applications, from Office 2003 to the above-mentioned ones. Do you support these, and how complete is your product line for 64-bit CentOS 5? Based on your answer, I'll know whether to go with a virtual machine-based solution, which means a Windows VM, or can remain Linux-only, with your solution. Thank you very much. Scott _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

1 0

reader
by qsm 27 Nov '07

27 Nov '07

1 0

SSD and linux
by Jerry Geis 27 Nov '07

27 Nov '07

Are the new SSD disks compatible with centos 5.0? Anybody have one? know where to get one? I think they only come with new laptops. Jerry

5 4

Need help with httpd.conf not rendering cgi or php files
by Scott Ehrlich 27 Nov '07

27 Nov '07

I got this working perfectly at home - what should be exact same setups- - Fresh install of CentOS 5 32-bit from DVD - yum update & upgrade - Reboot - yum install mysql-server - Download phpmyadmin and bugzilla from their respective home pages - Move both to /var/www/html, naming the extracted phpmyadmin directory as phpmyadmin, the same with bugzilla - Copy my working httpd.conf file from home and replacing the work one, then restarting httpd - sudo /etc/init.d/httpd restart - Verify mysql is running - sudo /etc/init.d/mysqld restart Call up firefox via an ssh x session and visit http://localhost/phpmyadmin/index.php. Instead of showing a rendered page, it only shows the text of the index.php file. Same for http://localhost/bugzilla/index.cgi What did I miss? The same config file from home, in a setup that worked perfectly, is missing something here! /usr/sbin/httpd -v Server version: Apache/2.2.3 Thanks for any help. Scott

8 11

script to take cd iso's and create dvd iso
by Tom Brown 27 Nov '07

27 Nov '07

Hi I used to have a script that would take a dir of cd iso's and then stick them together and create a DVD iso. I seem to remember downloading it from a link posted in here. I have searched but cant find it, i dont suppose anyone knows of such a thing? thanks

2 2

Kickstart install via network, nonexistant disk sda
by ethan＠757.org 26 Nov '07

26 Nov '07

Hello all, I have 3 Supermicro 1u servers, each with dual 250gb SATA drives. I have a server with CentOS 5 64bit setup for pxebooting and kickstart installs. I have a kickstart install file that doesn't specify the disks specifically. It works like a champ, and the operating system installs and completes. I have a kickstart install file that specifies the disk devices (sda, sdb) pulled and modified from another similiar system. My goal here is configuring software RAID. Whenever I try to use the file for software raid, she dies with an error: "Specified nonexistant disk sda in clearpart command" ... if I removed the --drives-sda,sdb from the clearpart, it will just fail on the part command for RAID. Now, I struggled with machine #1 for a long time, then realized that it is probably the onboard raid in the BIOS, which isn't a real RAID. Turned it off, and it appeared to be the solution. I thought I was well on my way. I did the same for machines #2 and #3 which had no installation attempts, and they would not work. I can take the disks from machine #1, which will run through a reinstall fine, and throw them in machine #2 and *it will install*. So it seems to be an issue with the partition information on the disk. I tried doing a dd if=/dev/zero of=/dev/sda (bs=1024 count=10000) to try to overwrite any RAID metadata and partition information and what not. During the install, when I have the error that sda is invalid, I can hit the vty2 (emergency shell) and easily run fdisk /dev/sda and print the partition table. So the device is there, and accessable. I've tried every incarnation of clearpart commands. My current kickstart info: # RAID kickstart # clearpart --linux --drives=sda,sdb # clearpart --all --linux --initlabel clearpart --drives=sda,sdb --all --initlabel # clearpart --all --initlabel --drives=sda,sdb part raid.9 --size=100 --ondrive=sda part raid.10 --size=100 --ondrive=sdb part raid.13 --size=2000 --ondrive=sdb part raid.12 --size=2000 --ondrive=sda part raid.16 --size=100 --grow --ondrive=sdb part raid.15 --size=100 --grow --ondrive=sda raid /boot --fstype ext3 --level=RAID1 --device=md0 raid.9 raid.10 raid swap --fstype swap --level=RAID1 --device=md1 raid.12 raid.13 raid / --fstype ext3 --level=RAID1 --device=md2 raid.15 raid.16 Any advice is appreciated!

1 0

install via http
by Hiep Nguyen 26 Nov '07

26 Nov '07

hi there, i try to install centos 5 via http, but i don't know what to put in when it asks for "Web site name" & "CentOS directory". can someone give me this info? can i used mirror.centos.org & /centos/5/os/i386/??? i only have the boot cd & i don't want to download and burn all 6 cds. thanks

6 12

boot is stopping in the system log gor status for a while
by ann kok 26 Nov '07

26 Nov '07

Hi all The system is stopping in the system log gor status. what is next? how do I check thank you ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

Re: SOLVED: Re: [CentOS] Dual boot box: WinXP & CentOS 5: Impossible to restore WinXP?
by Lanny Marcus 26 Nov '07

26 Nov '07

Some thoughts, for anyone faced with this type of problem on a dual boot box in the future: My first thought was to try to Rescue the WinXP Spanish language installation that came on the Dell Dimension 2400, out of the Dell factory. Later, I decided to wipe the entire drive, since I now have a WinXP English language Restore CD and I wanted to redo CentOS5, so I would have room to experiment with VMware Server. With regard to restoration or rescue of WinXP on a dual boot box, I believe the method Ross explained last week, about doing it from CentOS5, would be the fastest and easiest. For those with boxes dedicated 100% to WinXP, I believe the Ultimate Boot CD for Windows, which Phil mentioned (based on the BartPE Live CD) is the way to go. I downloaded the 196.6 MB file from http://www.ubcd4win.com and I have copied the contents of the Dell WinXP Restore CD to my HD. I like the fact that they explain workarounds, for those using a Dell WinXP Restore CD to make the UBCD4WIN CD. One of the mistakes I made, was after I got the box in 2005. On other new systems, I've wiped the drive and done clean installs, with four (4) partitions for Windows. Had I done that in 2005, I would have known that the Drivers for the box are not on the Dell WinXP Restore CD or on the Dell Driver CD that came with the box. Fortunately, last week, after I mounted the NTFS partition read only, I not only copied my data onto CD's, I copied other files, which turned out to include the Driver for the NIC. I believe the audio and video Drivers are also on the CD I made last week. :-) I went ahead and wiped the drives on the boxes of my wife and daughter, since they were out of town. The installation on my wife's box (Compaq Evo D300v) was the easiest. All of the Drivers for the Compaq Evo were on the Dell Restore CD, with the exception of the Driver for an inexpensive store brand web cam we bought recently. I will need to buy OEM license's for that box and daughters box. More $ for Microsoft.... All of the Drivers for my daughters box (Dell Dimension 4300) were on the Dell WinXP Restore CD too. I've configured wife and daughter as Restricted Users in WinXP, as Ross suggested. Special thanks, to everyone who responded with ideas! Lanny

1 0

apc deemon
by Euroka 26 Nov '07

26 Nov '07

Hi, I'm using Centos 5 (64bit) and connected an APC battery to the server and used the USB cable for monitoring this setup, but I can't find the apc daemon anymore in the offcial yum repo's. Has aocd become obsolete and has it been replaced by something else or do i need to add a third party repo? kind regards, euroka

3 4

A real bluetooth device manager for gnome?
by Robert Moskowitz 26 Nov '07

26 Nov '07

I would like to move away from command-line tools for my bluetooth devices. The gnome bluetooth manager is extremely limited in features. And I can't find anything going on like on the gnome-bluetooth site. Any one have any experience one this? It would be nice to start getting on par with Macs and Win systems....

1 0

SOLVED: Re: Partioning Error: Dual Boot, WinXP & CentOS5, 27 GB Free space; my error is?
by Lanny Marcus 26 Nov '07

26 Nov '07

On 25 November 2007, John Bowden j-alan at btconnect.com wrote: <snip> >I think the problem is that you can only have 4 Primary partitions on a disk. >If you to convert one of the NTFS partitions to an extended partition, with >the NTFS partition inside it. Personally, if you want to keep the 4 drive >letters in windoz, I would back up the whole disk ("in case"), set up the >disk with 1 Primary NTFS partition and an extended Partition with the other 3 >NTFS partitions inside it. Leave the free space as free space and let the >CentOS installer to use the free space as it sees fit John: THANK YOU! That was it! I blew it away with QtParted and in a few minutes, I had it correct. The attention to detail was lacking on that box. I got the other 2 boxes up and running, without this frustration. Hopefully they are partitioned correctly. CentOS is now installing on that box. :-) Lanny

2 1

Linux driver for HP Laserjet 3500 printer - yum won't install
by Andrew Allen 25 Nov '07

25 Nov '07

I'm trying to install the linux driver for an HP Colour Laserjet 3500 in CentOS 5. I've installed the kde.repo (with appropriate priorities set up), but when I try yum install pxljr-1.1-1.i386.rpm, yum says 'nothing to do' - is this because the priority protection won't let it install from the kde repo? The alternative approach seems to be to use yum localinstall with the downloaded package, but then I get the message that 'the package is not signed'. So how do I resolve that please - the instructions regarding 'signing of packages' don't seem very clear to those of us who weren't 'born and bred' on linux! Thanks, Andy

1 0

Partioning Error: Dual Boot, WinXP & CentOS5, 27 GB Free space; my error is?
by Lanny Marcus 25 Nov '07

25 Nov '07

Hello: Starting Friday afternoon, I blew away the installations on the three (3) boxes we use as Desktops. On two (2) of them (my Dell Dimension 2400 and my wife's Compaq Evo D300v), I have MS Windows XP and CentOS5 running. :-) On my daughters box (Dell Dimension 4300) I am having problems with the partitioning. Probably this is due to some mistake I have made, with regard to "Active" or "Primary" partitions? The HD has four (4) NTFS partitions on dev/hda. hda1 > hda4. According to the partition table shown in the CentOS5 installation, there is 27925 MB of Free Space on the HD. If I try to create a /boot partition (100 MB) or an LVM, I get: "Error partitioning - Could not allocate requested partitions. Partitioning failed. Could not allocate partitions as primary partitions. Not enough space left to create partition for /boot More or less the same error: "Automatic partitioning errors - You have not defined a root (/) partition. This can happen if not enough space." What am I doing wrong on that box? TIA! - Lanny --------------------------------------------------------- Over 800 Magazine titles up to 85% off http://lowcostmagazines.com/

2 1

Total novice
by Manuel Leon 25 Nov '07

25 Nov '07

Hi. I want to remove one of three hard drives. But if I just remove the disk, Linux signals errors and enters administrative mode requesting corrective actions which, of course, I do not know. If I reconnect the drive, everything returns to normality. Can anyone help me? Thanks in advance. MLM

2 1

snapshots of server state with F/OSS software
by Rogelio 25 Nov '07

25 Nov '07

I'm looking for something (ideally) in the CentOS repo that lets me easily take and restore snapshots of my system while powered on (similar to how later versions of Norton Ghost work). Is LVM my best bet to do this? (I hate to admit this, but up to this point when I've been in a pinch, I've just powered the box down on off hours and then imaged it via some sort of live cd)

6 8

yum install nautilus-sendto-bluetooth fails on 5.0
by Frank Büttner 25 Nov '07

25 Nov '07

Hello, when I try to install it, I get this error: yum install nautilus-sendto-bluetooth Loading "installonlyn" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package nautilus-sendto-bluetooth.i386 0:0.7-5.fc6 set to be updated --> Running transaction check --> Processing Dependency: nautilus-sendto = 0.7-5.fc6 for package: nautilus-sendto-bluetooth --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package nautilus-sendto.i386 0:0.7-5.fc6 set to be updated --> Running transaction check --> Processing Dependency: libgaim.so.0 for package: nautilus-sendto --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package gaim.i386 2:2.0.0-0.28.beta5.el5 set to be updated --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: nautilus-sendto-bluetooth i386 0.7-5.fc6 base 8.2 k Installing for dependencies: gaim i386 2:2.0.0-0.28.beta5.el5 base 6.7 M nautilus-sendto i386 0.7-5.fc6 base 61 k Transaction Summary ============================================================================= Install 3 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 6.8 M Is this ok [y/N]: y Downloading Packages: Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/bin/gaim from install of gaim-2.0.0-0.28.beta5.el5 conflicts with file from package pidgin-2.0.2-3.el5 Error Summary -------------

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss