- Discuss - lists.centos.org

CentOS 5 on IA64
by James A. Peltier 12 Sep '07

12 Sep '07

Hi All, I am looking for information on when CentOS 5 will be available for IA64. I found this forum posting but no responses http://www.centos.org/modules/newbb/viewtopic.php?topic_id=8714&forum=45 I am looking to perform a large migration of about 500 workstations from various Suse and Red Hat versions to CentOS to standardize some what. Because I have to support x86 (32 & 64) and IA64 it would be nice to do this all at once. I know that CentOS 4.5 supports all the platforms listed, but if it's going to come out soon I'll just wait as it offers my users a lot more in terms of packages and support. BTW: Anyone out there have CentOS on SGI Altix? -- James A. Peltier Technical Director, RHCE SCIRF | GrUVi @ Simon Fraser University - Burnaby Campus Phone : 604-291-3610 Fax : 604-291-3045 Mobile : 778-840-6434 E-Mail : jpeltier(a)cs.sfu.ca Website : http://gruvi.cs.sfu.ca | http://scirf.cs.sfu.ca MSN : subatomic_spam(a)hotmail.com

3 3

Re: [CentOS] rpm spec files for ruby
by James B. Byrne 12 Sep '07

12 Sep '07

In-Reply-To: <20070911203414.GQ19043(a)polop.usc.edu> On: Tue, 11 Sep 2007 13:34:14 -0700, Garrick Staples <garrick(a)usc.edu> wrote: Content-Type: text/plain; charset="us-ascii" On Tue, Sep 11, 2007 at 03:56:07PM -0400, James B. Byrne alleged: >> I am now getting this: >> >> configure: creating ./config.status >> config.status: creating Makefile >> + --with-sitedir=/usr/lib/ruby/site_ruby --with-default-kcodeone >> --with-bundled-sha1 --with-bundled-md5 --with-bundled-rmd160 >> --enable-shared --enable-ipv6 --enable-pthread >> --with-lookup-order-hack=INET --disable-rpath --with-ruby-prefix=/usr/lib >> /var/tmp/rpm-tmp.49488: line 62: --with-sitedir=/usr/lib/ruby/site_ruby: >> No such file or directory >> error: Bad exit status from /var/tmp/rpm-tmp.49488 (%build) >> >> Since /usr/lib/ruby/site_ruby evidently exists, why am I being told that >> it does not? > It is telling you that "--with-sitedir=/usr/lib/ruby/site_ruby" doesn't > exist as a file, which is obviously correct. You probably have an extra > newline char or missing continuation char. You will note that the error message states "No such file or directory" which is not congruent with your observation. Indeed, site_ruby MUST be a directory. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Can't install Kaffeine from RPMForge repo
by Niki Kovacs 12 Sep '07

12 Sep '07

Hi, I'm currently fiddling with the KDE desktop just to see if it suits our users better than the default GNOME. I configured the RPMForge repos and launched a 'yum install kaffeine'. After packages are downloaded, I get the following error: Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/share/mimelnk/application/x-mplayer2.desktop from install of kaffeine-0.7.1-1.2.el5.rf conflicts with file from package kdelibs-3.5.4-11.el5.centos Error Summary ------------- Any suggestions? Niki Kovacs

2 3

CentOSPlus Perl Upgrade
by Nick Webb 12 Sep '07

12 Sep '07

Hey All, I'm trying to upgrade to perl 5.8.8 via CentOSPlus, but am having no luck. Here is what I have done. # yum list | grep perl . . . perl.i386 3:5.8.5-12.1 installed . . . Created /etc/yum.repos.d/CentOS-Base.repo with: #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ gpgcheck=1 enabled=0 priority=2 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 exclude=kernel kernel-devel kernel-smp-* kernel-hugemem* kernel-largesmp* Then tried: # sudo yum --enablerepo=centosplus upgrade perl Setting up Upgrade Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Excluding Packages from CentOS-4 - Plus Finished Could not find update match for perl No Packages marked for Update/Obsoletion What am I missing? Actually, looking at the "yum list" output, it looks like the current version installed is of the i386 architecture, while this machine is x86_64? Is that the problem? If so is it safe to install the i386 package? Is there an easy way to do this via yum? # uname -a Linux dev 2.6.9-42.0.10.ELsmp #1 SMP Tue Feb 27 09:40:21 EST 2007 x86_64 x86_64 x86_64 GNU/Linux I'm begining to think the previous admin made some poor decisions on this server... Thanks! Nick

2 1

imap webmail client needed
by Sokol 12 Sep '07

12 Sep '07

Hi list, I´m searching a webmail imap client including a calendar and a todo list (last is not necessary) for 2 or 3 users. I have tried zimbra but it´s too oversized for my claim. Do someone have a hint? Thanks. Kamill

5 4

RE: php 5.2
by Melinda Odom 12 Sep '07

12 Sep '07

Hi, seems to have a lot of security fixes: http://www.php.net/ChangeLog-5.php#5.2.0 Version 5.2.0 was orginally released 02-Nov-2006. What is the process and time frame for released software to be available in an operating system? I am not familiar with this. Sincerely, Melinda Odom Design Hosting, Inc. www.designhosting.biz 479-471-0891 -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org]On Behalf Of centos-request(a)centos.org Sent: Tuesday, September 11, 2007 7:00 AM To: centos(a)centos.org Subject: CentOS Digest, Vol 32, Issue 11 Send CentOS mailing list submissions to centos(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos or, via email, send a message with subject or body 'help' to centos-request(a)centos.org You can reach the person managing the list at centos-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS digest..." Today's Topics: 1. php 5.2 (Melinda Odom) 2. downloading an src.rpm? (Dave) 3. Re: php 5.2 (Alexander Dalloz) 4. Re: downloading an src.rpm? (Alexander Dalloz) 5. Re: Re: KDE-Repos (Lamar Owen) 6. Centos 4.5 clamav update error (Lorenzo) 7. Re: Centos 4.5 clamav update error (Ralph Angenendt) 8. Re: Centos 4.5 clamav update error (Lorenzo) 9. Re: Centos 4.5 clamav update error (John Hinton) 10. Re: KDE-Repos (Timothy Kesten) 11. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 12. Boot problem with CENTOS 5 (chuck) 13. New RTL8111B Wiki Page (Kirk Bocek) 14. Re: How to upgrade WBEL4 to CentOS4? (Phil Schaffner) 15. Re: package manager (Phil Schaffner) 16. Re: Boot problem with CENTOS 5 (Phil Schaffner) 17. Re: Performance of CentOS as a NAT gateway (Guy Boisvert) 18. Re: Performance of CentOS as a NAT gateway (Guy Boisvert) 19. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 20. is there an apache limit on submit size for centos 4 and 5 (Jerry Geis) 21. Re: Performance of CentOS as a NAT gateway (Toby Bluhm) 22. Re: How to upgrade WBEL4 to CentOS4? (tdukes(a)sc.rr.com) 23. Re: rpm spec files for ruby (James B. Byrne) 24. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 25. Nautilus won't start (Kenneth Porter) 26. RE: Performance of CentOS as a NAT gateway (Ross S. W. Walker) 27. Re: Performance of CentOS as a NAT gateway (Les Mikesell) 28. Re: Performance of CentOS as a NAT gateway (gjgowey(a)tmo.blackberry.net) 29. Re: Nautilus won't start (gjgowey(a)tmo.blackberry.net) 30. Re: Nautilus won't start (Kenneth Porter) 31. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 32. Re: Performance of CentOS as a NAT gateway (John R Pierce) 33. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 34. Downgrade samba? (Jason Pyeron) 35. Re: Performance of CentOS as a NAT gateway (gjgowey(a)tmo.blackberry.net) 36. Re: Downgrade samba? (gjgowey(a)tmo.blackberry.net) 37. Re: rpm spec files for ruby (Karanbir Singh) 38. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 39. Re: Downgrade samba? (Karanbir Singh) 40. Re: Performance of CentOS as a NAT gateway (gjgowey(a)tmo.blackberry.net) 41. apche vhosts ldap (Sunet Sysadmin) 42. Re: Performance of CentOS as a NAT gateway (Bart Schaefer) 43. Re: Installerror on installation Kaffeine on CentOS 5 (Rex Dieter) 44. Re: Performance of CentOS as a NAT gateway (gjgowey(a)tmo.blackberry.net) 45. Re: How to upgrade WBEL4 to CentOS4? (Scott Silva) 46. Re: Boot problem with CENTOS 5 (chuck) 47. Re: Boot problem with CENTOS 5 (John R Pierce) 48. Re: apche vhosts ldap (Indran D Govender) 49. Re: Performance of CentOS as a NAT gateway ( <hrbac.conf(a)seznam.cz>) 50. Network Connection Card Problem? (Jun Salen) 51. Re: Network Connection Card Problem? (Jun Salen) 52. MD5 and NIS (Jeremy Sanders) 53. Re: Network Connection Card Problem? (Alain Spineux) ---------------------------------------------------------------------- Message: 1 Date: Mon, 10 Sep 2007 09:39:54 -0500 From: "Melinda Odom" <info(a)designhosting.biz> Subject: [CentOS] php 5.2 To: <centos(a)centos.org> Message-ID: <OHEMIKFDMHLDNJAPNOLEAEMNIGAA.info(a)designhosting.biz> Content-Type: text/plain; charset="windows-1250" Hi, I was asking about php 5.2 because I would like to use this program with these requirements: http://www.magentocommerce.com/system-requirements This ecommerce store is built with the zend framework and requires php 5.2. Mcrypt is not in the centos mirrors either. I did manage to get this beta ecommerce store installed on php 5.1.6-12 by removing the mycript line in the install xml file and also changing the initial install page code to not be less than 5.1 I wouldn't think this would be good to do for a production program. I would prefer to stay with the centos mirror as this is what I have setup. Hopefully centos will have php 5.2 in the future. Thanks! Sincerely, Melinda Odom Design Hosting, Inc. www.designhosting.biz 479-471-0891 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.12/997 - Release Date: 9/9/2007 10:17 AM ------------------------------ Message: 2 Date: Mon, 10 Sep 2007 10:52:21 -0400 From: "Dave" <dmehler26(a)woh.rr.com> Subject: [CentOS] downloading an src.rpm? To: <centos(a)centos.org> Message-ID: <000301c7f3ba$312fa0a0$0200a8c0@satellite> Content-Type: text/plain; format=flowed; charset="Windows-1252"; reply-type=original Hello, I've got the rpmforge repo configured as a 3rd party repo. There's an rpm that i'd like to get the coresponding src.rpm, install it, and recompile it. How would i do this with yum? Thanks. Dave. ------------------------------ Message: 3 Date: Mon, 10 Sep 2007 16:57:21 +0200 From: Alexander Dalloz <ad+lists(a)uni-x.org> Subject: Re: [CentOS] php 5.2 To: CentOS mailing list <centos(a)centos.org> Message-ID: <46E55B51.4090302(a)uni-x.org> Content-Type: text/plain; charset=windows-1250 Melinda Odom schrieb: > Hi, > > I was asking about php 5.2 because I would like to use this program with > these requirements: > http://www.magentocommerce.com/system-requirements > > This ecommerce store is built with the zend framework and requires php 5.2. > Mcrypt is not in the centos mirrors either. http://wftp.tu-chemnitz.de/pub/linux/centos/5/extras/x86_64/RPMS/php-mcrypt- 5.1.6-12.el5.centos.x86_64.rpm What's that? Or are you speaking about CentOS 4.5? Then get it through this path: http://phprpms.sourceforge.net/mcrypt > Sincerely, > Melinda Odom Alexander ------------------------------ Message: 4 Date: Mon, 10 Sep 2007 17:01:02 +0200 From: Alexander Dalloz <ad+lists(a)uni-x.org> Subject: Re: [CentOS] downloading an src.rpm? To: CentOS mailing list <centos(a)centos.org> Message-ID: <46E55C2E.8000208(a)uni-x.org> Content-Type: text/plain; charset=windows-1252 Dave schrieb: > Hello, > I've got the rpmforge repo configured as a 3rd party repo. There's an > rpm that i'd like to get the coresponding src.rpm, install it, and > recompile it. How would i do this with yum? > Thanks. > Dave. yum install yum-utils (from extras) yum-downloader <package> Alexander ------------------------------ Message: 5 Date: Mon, 10 Sep 2007 11:10:03 -0400 From: "Lamar Owen" <lowen(a)pari.edu> Subject: Re: [CentOS] Re: KDE-Repos To: CentOS mailing list <centos(a)centos.org> Message-ID: <200709101110.03088.lowen(a)pari.edu> Content-Type: text/plain; charset="iso-8859-1" On Sunday 09 September 2007, Timothy Kesten wrote: > http://kde-redhat.sourceforge.net/ > There are mentioned yum Repos for REHL. This repository works fine. But, be aware that it replaces large portions of your system, including system libraries. It doesn't touch the kernel, which is one reason I use it on several desktops. It gives you a much updated userland with the stable kernel base. But, if you across a bug in one of the libraries KDE-Rehat replaces, you will hten need to take it up with the KDE-Redhat maintainer and not file it as a bug report in CentOS. -- Lamar Owen Chief Information Officer Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu ------------------------------ Message: 6 Date: Mon, 10 Sep 2007 17:12:19 +0200 From: Lorenzo <lorenzo(a)gmk.it> Subject: [CentOS] Centos 4.5 clamav update error To: centos(a)centos.org Message-ID: <46E55ED3.9060403(a)gmk.it> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Hi all, I have a problem updating clamav on my mail server: Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamav Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamd Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamav Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamd I'm using rpmforge repo on CentOS 4.5, everything else is up to date. I guess that there is a conflict with the currently available glibc.i686 (2.3.4-2.36) and the package providing rtld. Does anyone knows if there is a fix/workaround for that? Otherwise is it possible to setup exim to use clamd on a different server via tcp/ip? tia Regards -Lorenzo Quatrini ------------------------------ Message: 7 Date: Mon, 10 Sep 2007 17:32:17 +0200 From: Ralph Angenendt <ra+centos(a)br-online.de> Subject: Re: [CentOS] Centos 4.5 clamav update error To: centos(a)centos.org Message-ID: <20070910153217.GR1328(a)br-online.de> Content-Type: text/plain; charset="us-ascii" Lorenzo wrote: > Hi all, > I have a problem updating clamav on my mail server: > > Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamav > Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamd > Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamav > Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamd > > I'm using rpmforge repo on CentOS 4.5, everything else is up to date. You're using the rpmforge repository for CentOS 5 on CentOS 4.5. This will and cannot work. Ralph

3 2

downloading an src.rpm?
by Dave 12 Sep '07

12 Sep '07

Hello, I've got the rpmforge repo configured as a 3rd party repo. There's an rpm that i'd like to get the coresponding src.rpm, install it, and recompile it. How would i do this with yum? Thanks. Dave.

3 2

Re: [CentOS] CentOS 5 on IA64
by Les Bell 12 Sep '07

12 Sep '07

"Lamar Owen" <lowen(a)pari.edu> wrote: >> What is the minimum for actual hardware? I have a small s390 here that I've been looking for a reason to power up. What sort of access is needed? << Typical install minimum is around 512 MB RAM and a few GB of DASD. If you're installing in an LPAR you'll need to use the HMC to boot install media from CD-ROM or tape. Under VM, you can use a CMS profile disk to move the initial boot files onto DASD, then run a REXX exec to punch them to a virtual RDR and then re-ipl. Once the install-time kernel has started, you need to drive the install via SSH, or remote X or VNC (I forget which mechanisms RHEL supports) and it needs to use either a physical interface or a guest LAN interface, IUCV or VCTC to do that as well as download the installation packages. Once installation is done, I don't know what resources would be required to rebuild the entire distro - that's where the developers come in. And obiously another LPAR or VM guest would be required to test the built 5.0 system. Best, --- Les Bell, RHCE, CISSP [http://www.lesbell.com.au] Tel: +61 2 9451 1144 FreeWorldDialup: 800909

1 0

Re: [LARTC] ASTERISK BOX behind a filewall
by Indunil Jayasooriya 12 Sep '07

12 Sep '07

> > > > When you're dialing from your xlite, are you trying another extension on > the same network? YES > > > > -- Thank you Indunil Jayasooriya

1 0

php 5.2 available?
by Melinda Odom 12 Sep '07

12 Sep '07

Hi, Will php 5.2 be available for centos 5? The version in the mirror is php 5.1.6-12. Thank you. Sincerely, Melinda Odom Design Hosting, Inc. www.designhosting.biz 479-471-0891 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.9/994 - Release Date: 9/7/2007 4:40 PM

6 5

[Fwd: Re: rpm spec files for ruby]
by James B. Byrne 11 Sep '07

11 Sep '07

On Tue, September 11, 2007 12:58, James B. Byrne wrote: > > Is my understanding of this correct or in what matter is it defective? > Evidently defective. I have found another reference that describes sub-packages. So the unqualified %files directive is for the base package and the qualified ones are for the sub-packages. Is this correct? Sincerely, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Re: rpm spec files for ruby
by James B. Byrne 11 Sep '07

11 Sep '07

Karanbir Singh wrote: > To find out exactly what is going on, look at the bit which creates > the .files that are then used in the %files section to workout what > which files go into what rpm. There would be an overlap there. Given this snippet: %files -f ruby.files ... %files devel -f ruby-devel.files I speculate (since the rpm manual is not very helpful on the matter) that if --target= is not specified then the first file command will execute but not the third and include all of the files listed in ruby.files only whereas if --target=devel is specified to the rpmbuild command then the first and second commands will execute and include the contents of ruby.files and ruby-devel.files. Is my understanding of this correct or in what matter is it defective? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Problem with VSFTP
by Rajeev R Veedu 11 Sep '07

11 Sep '07

I have a vsftp server hosted on custom dyndns site. We have a 4mb ADSL connection. When I tried to download the files from the ftp server with wan IP address or the dyndns address it downloads some files and disconnects. Please find below an extract from the log file (ace ftp client). I would appreciate if someone could guide me, possibly with a solution for this problem. Many thanks Rajeev 150 Opening BINARY mode data connection for 4393 MP001.dwg (15434547 bytes). 226 File send OK. Transferred 15,434,547 bytes in 20.02 seconds (753.04 KB/s) PASV 227 Entering Passive Mode (86,98,38,95,118,208) RETR 4393 MP002.dwg 150 Opening BINARY mode data connection for 4393 MP002.dwg (9642920 bytes). 226 File send OK. Transferred 9,642,920 bytes in 11.64 seconds (809.01 KB/s) PASV 227 Entering Passive Mode (86,98,38,95,91,22) RETR 4393 SC001.dwg 150 Opening BINARY mode data connection for 4393 SC001.dwg (382929 bytes). 226 File send OK. Transferred 382,929 bytes in 0.20 seconds (1842.14 KB/s) PASV 227 Entering Passive Mode (86,98,38,95,54,129) RETR 4393a1frontpage.dwg 150 Opening BINARY mode data connection for 4393a1frontpage.dwg (1709818 bytes). 226 File send OK. Transferred 1,709,818 bytes in 0.95 seconds (1752.09 KB/s) PASV Connection aborted Unable to open data socket Delaying for 5 seconds before next attempt... Processing item, attempt 2... Connecting to 86.98.38.95 on port 21. Attempt 1 of 3... 220 Welcome to Our FTP server. USER Ourferns 331 Please specify the password. PASS ***** 230 Login successful. Server Type: UNIX (standard) FEAT My VSFTPD.CONF anonymous_enable=NO local_enable=YES write_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES xferlog_file=/var/log/vsftpd.log xferlog_std_format=YES ftpd_banner=Welcome to our FTP server. # chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list #chroot_local_user=YES pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES

2 1

nedi rpms for centos 5
by Kanwar Ranbir Sandhu 11 Sep '07

11 Sep '07

Hi Everyone, I'm looking for rpms of nedi for centos 5. Does anyone know of a repo that has them? Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.22.2-42.fc6 i686 GNU/Linux 12:58:56 up 11 days, 11:24, 1 user, load average: 0.88, 0.92, 0.84

1 0

MD5 and NIS
by Jeremy Sanders 11 Sep '07

11 Sep '07

Does anybody know whether it is possible to enable MD5 passwords for NIS and local passwords? Is it just a matter of running authconfig --enablemd5 and new passwords will use MD5 and old ones will still work? Of course using LDAP might be a "better" solution (if it was easy to install). I've tried googling and didn't get any useful answers... Jeremy

2 1

Downgrade samba?
by Jason Pyeron 11 Sep '07

11 Sep '07

After reading http://lists.samba.org/archive/samba/2003-November/001828.html what would the best approach for downgrading samba-3.0.10-1.4E.12.2 to 2.7 on centos4, then later upgrading back to current? -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Sr. Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited.

4 3

Performance of CentOS as a NAT gateway
by Bart Schaefer 11 Sep '07

11 Sep '07

We have a single 3GHz P4 box w/2GB RAM running CentOS 3.8, acting as a gateway, which serves multiple IP address, having one virtual interface for each IP, e.g., eth0:1, eth0:2, etc. These interfaces/IPs are on the public internet. Each of these IP addresses is the NAT address for a different small LAN. All of these LANs are connected through a single Linksys 100Mb switch, to eth1 on the gateway. Thus, in case it's not obvious from that description, traffic from LAN X travels through through the switch to eth1 on the gateway, where iptables translates it to the IP address of eth0:X and thence out to the net. The gateway is totally idle except for handling these NATs; no other processes except the usual OS bookkeeping. All NIC and switch hardware involved is 100Mb. This all works, but we're experiencing network congestion somewhere. The LANs appear to become saturated when only about 10Mb of total traffic is passing through the public IPs. That is, we seem to be losing almost 90% of our capacity somewhere in the translation. Before we attempt to sweep this under the rug by using Gb NICs/switches for the LANs, we'd like to understand what's going on. I can't find any recent statistics for Linux NAT performance, but the older stuff I can find (e.g. 50k packets/sec for a P3-450Mhz) seems to indicate that the gateway should easily be up to the task of handling the NAT traffic. Am I wrong about this? Is there any way to diagnose whether the NAT is the bottleneck? Would we benefit from upgrading to a newer CentOS (2.6 kernel as opposed to 2.4)? Or is it more likely to be the switch, in which case what would be a recommended replacement for the Linksys? I can provide more details in private mail if necessary. Thanks in advance for any ideas.

12 36

Boot problem with CENTOS 5
by chuck 11 Sep '07

11 Sep '07

I had everything up and running. All of the help thus far was excellent. Thanks! I then did the updates that the OS prompted to do and selected reboot now once they completed. Now when the server reboots after the bios info I get the following when the OS starts to initialize: GRUB And it hangs there. How do I clear this? FIx this? Thanks in advance, Chuck

4 4

rpm spec files for ruby
by James B. Byrne 11 Sep '07

11 Sep '07

I am trying to package ruby-1.8.6 for CentOS-4.5 and I would like to take a look at the spec files used for ruby-1.8.1 that ships with CentOS. Is there any place that I can see these or could someone do me the kindness of sending them to me? I am also confused as to how one breaks out the component parts of a build into separate rpm packages. The source distribution from ruby-lang.org seemingly permits only three install options; all, no-docs and docs-only. How and where does one refactor the build scripts to create separate rpms for ruby, ruby-libs, ruby-devel, ruby-docs, rdoc, irb, ri, and ruby-tcltk? I would appreciate greatly any guidance here. I have zero experience with creating rpm packages, but I ran across a reference to checkinstall in a reply to one of my queries on ruby-forum and have decided to have a go at putting an rpm together, for my own purposes if it proves beyond my capability to do so for the community. Sincerely, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 7

Re: [CentOS] Network Connection Card Problem?
by Jun Salen 11 Sep '07

11 Sep '07

>Hi List, > >My Mail/Proxy server has from time to time refuse to >accept accept network connection. If I restart the >network service, the service will again start to >accept connection but after some time will again >refuse connection. I use CentOS 4.5 with Squid, >DansGuardian, Postfix. Please can someone point me >what are the possible cause of this. Thank you. In addition to my posting above. When I make ping to other machine from the server, the server will again restore and accept connection. This is weird, so my temporary solution is to let the server continually ping other machine. Please help. Thanks again. junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

2 1

Network Connection Card Problem?
by Jun Salen 11 Sep '07

11 Sep '07

Hi List, My Mail/Proxy server has from time to time refuse to accept accept network connection. If I restart the network service, the service will again start to accept connection but after some time will again refuse connection. I use CentOS 4.5 with Squid, DansGuardian, Postfix. Please can someone point me what are the possible cause of this. Thank you. junji aisalen.wordpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

1 0

Nautilus won't start
by Kenneth Porter 10 Sep '07

10 Sep '07

I've been running CentOS 5 since release on a couple of servers with few problems. Last night I tried it as a workstation for the first time. It booted up fine and I could log into X. I then ran pup to install all available updates and shut down afterwards to load the new kernel. (I use yum on the servers.) This morning I start up on the new kernel and after logging in at the Gnome prompt, I get a message that Nautilus can't start. I'm not an X guru, being mostly a server driver over ssh. What's the best way to debug this? (I have lots of experience debugging, just not with X.)

2 2

Re: [CentOS] How to upgrade WBEL4 to CentOS4?
by tdukes＠sc.rr.com 10 Sep '07

10 Sep '07

---- Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> wrote: > On Sat, 2007-09-08 at 01:03 -0400, Eric B. wrote: > > Hi, > > > > I've got a couple of servers that are running WBEL4 that I would like to > > upgrade to CentOS4. I noticed that there is a FAQ which explains how to > > upgrade WBEL3 to CentOS3, but haven't found anything similar for WBEL4. > > > > Are the instructions for the WBEL3 upgrade the same for WBEL4? Should I be > > doing something else instead? > > > > Any help would be greatly appreciated. I did this using those instructions some time back. Just substitute WBEL3 for WBEL4. The paths for the rpms were different is about the only thing if I remember correctly was what I had to change.

1 0

is there an apache limit on submit size for centos 4 and 5
by Jerry Geis 10 Sep '07

10 Sep '07

Is there a limit to the size of the form that apache will accept? I have a small import utility (not php - just straight cgi and C program). It will import smaller files. 350 Meg is the largest I successfully did. But a 6.5G file it will not do. Seems like the form does even submit. Is there a config option in apache that doesnt even accept it? I looked at /var/log/httpd/ error and access and nothing is there. Any ideas? Jerry

1 0

package manager
by Dan Dansereau 10 Sep '07

10 Sep '07

How do I force the package manager to re-install a package? Such as Development - > Development Tools -> G77 Or the entire Development tools package? The G77 Is missing - and when I ask it to install - it states that is already installed. Thanks Dan A. Dansereau

3 2

New RTL8111B Wiki Page
by Kirk Bocek 10 Sep '07

10 Sep '07

I've created a new CentOS wiki page for the Realtek RTL8111B and related NICs: http://wiki.centos.org/HardwareList/RealTekRTL8111b There's also a driver disk for CentOS 4.5 and 5.0. Kirk Bocek

1 0

KDE-Repos
by Timothy Kesten 10 Sep '07

10 Sep '07

Hi Folks, I'm verry impressed about CentOS 5. Verry stable und fast. And yes, I know, it's mostly used as a server system. Nevertheless, I'd like to use it as my Desktopsystem also. My question: what is your experience with the KDE-Repos? Is it dangerous to use it? Or is it reliable? Thx Timothy

3 4

Centos 4.5 clamav update error
by Lorenzo 10 Sep '07

10 Sep '07

Hi all, I have a problem updating clamav on my mail server: Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamav Error: Missing Dependency: libc.so.6(GLIBC_2.4) is needed by package clamd Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamav Error: Missing Dependency: rtld(GNU_HASH) is needed by package clamd I'm using rpmforge repo on CentOS 4.5, everything else is up to date. I guess that there is a conflict with the currently available glibc.i686 (2.3.4-2.36) and the package providing rtld. Does anyone knows if there is a fix/workaround for that? Otherwise is it possible to setup exim to use clamd on a different server via tcp/ip? tia Regards -Lorenzo Quatrini

3 3

Installerror on installation Kaffeine on CentOS 5
by Timothy Kesten 10 Sep '07

10 Sep '07

Hi Folks, I've tried to install kaffeine on CentOS 5 but I get following error Transaction Check Error: file /usr/share/mimelnk/application/x-mplayer2.desktop from install of kaffeine-0.7.1-1.2.el5.rf conflicts with file from package kdelibs-3.5.4-11.el5.centos Any hints to solve this problem? Delete/rename /usr/share/mimelnk/application/x-mplayer2.desktop ? Thx Timothy

3 6

need help on second Ethernet port (eth1) point to point connect
by mcclnx mcc 10 Sep '07

10 Sep '07

I have two DELL servers with two Ethernet ports in it. Bith servers have CENTOS 4.5 installed. First Ethernet port connect to public Ethernet line and work correctly. Second Ethernet port I connect point-to-point as private Ethernet (cable direct connect without router or switch). Private Ethernet use IP asddress 1.1.1.1 and 1.1.1.2. I check "ifconfig -a" and both eth0 and eth1 are up and active. when I tried to ping another server use second port (private) and no response. Does anything I configure wrong? Thanks. ======== info === %ifconfig -a eth0 Link encap:Ethernet HWaddr 00:08:74:EA:54:64 inet addr:172.29.86.15 Bcast:172.29.85.255 Mask:255.255.255.0 inet6 addr: fe80::208:74ff:feea:5464/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:65669 (64.1 KiB) TX bytes:11847 (11.5 KiB) eth1 Link encap:Ethernet HWaddr 00:0E:2E:C8:B9:80 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:18 Base address:0x4c00 %ping 1.1.1.2 PING 1.1.1.2 (1.1.1.2) 56(84) bytes of data. >From 1.1.1.1 icmp_seq=1 Destination Host Unreachable >From 1.1.1.1 icmp_seq=2 Destination Host Unreachable >From 1.1.1.1 icmp_seq=3 Destination Host Unreachable --- 1.1.1.2 ping statistics --- 4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3015ms , pipe 3 %telnet 1.1.1.2 Trying 1.1.1.2... telnet: connect to address 1.1.1.2: No route to host ____________________________________________________________________________________ 杜絕網路駭客，保障帳號安全 - 馬上設定 Yahoo!奇摩安全圖章http://tw.info.yahoo.com/seal/index.html

7 10

Saving network configuration
by Mezei Zoltán 10 Sep '07

10 Sep '07

Hi, Is there a tool in centos which can save the actual network configuration somehow? Preferably to the network-scripts directory. I'd like to have it configured the Centos-way but it seems a bit puzzling to set up multiple routing tables... Zizi

1 0

kmod-drbd-smp (2.6.9-55.0.2.EL) has unknown symbols (kmod-drbd not)
by Akemi Yagi 10 Sep '07

10 Sep '07

(Sorry for starting a new thread; I could not find the original message in my mbox.) Martin Hamant wrote: > Johnny Hughes <johnny at centos.org> écrivait: >> OK ... For the drbd-kmod*.plus kernels, they are now in the CentOSPlus >> directory / Repository. If you are using CentOSPlus kernel, you need >> to also get your module for DRBD (or XFS) from there too. >> >> If you are using the Base Kernel (non-Plus one) then you would get >> your DRBD Modules (or XFS modules) from extras. >> >> This should prevent the exclude requirement to get non-Plus kernel >> modules. >> >> SO ... if you need a module for the base kernel, it is in extras ... >> if you need a module for the centosplus kernel, it is in centosplus. > > Sounds great. > > The last problem is if "plus" and "extras" repos are both activated: it > occurs for centosbase/centosplus kernels the same way as for > kmod-drbd... because last version is determined by the text pattern :( > > The centosplus repo should be activated with care... > > About updating drbd modules, what is the current behavior when you issue > a "yum update" ? Is the new kmod-drbd is install automatically (like > kernels are) ? With the precedent package you'll had to install the new > one manually if you didn't want to get stuck with a new fresh default > kernel without any drbd support ^^ A centosplus kernel update (2.6.9-55.0.6) came out. Because the kernel and kmod-drbd were pushed out at the same time, there was no need to hold the kernel update until kmod-drbd becomes available. However, yum update failed . Turns out kmod-drbd needed to be excluded from the extras repo. This was because centosplus is given a lower priority than extras and yum tried to pull kmod-drbd (for the standard kernel) from the extra repo. So, the answer to the situation above (which is the case with my test machine) is that you need to exclude kmod-drbd from extra and that as far as kernel and kmod-drbd come out together, installation is done all automatic. Akemi

1 0

Link to call me for free
by milind chaudhari 10 Sep '07

10 Sep '07

I am using jaxtr, and if you also sign up, we can talk for free on the phone at any time. -milind P.S. Here is the link to sign up: http://www.jaxtr.com/user/ticket?n=T1s7331ncxgm2p&type=joininvite --- Delivered by jaxtr, Inc., 855 Oak Grove Avenue, Suite 100, Menlo Park, California 94025. To stop receiving messages from this sender go to http://www.jaxtr.com/user/reportabuse.jsp?it=T1s7331ncxgm2p

1 0

Centos5 Webcam/Video input/output
by Stewart Walker 09 Sep '07

09 Sep '07

We have been exploring the possibilities using Centos5 for video. Video and Audio Streaming sounds like great fun. Subject is pretty new to us here and well there was nothing else to do but take the dive. After much time beating our heads against the wall and covering the planet google'ing and hitting the books trying to get a webcam to work. I am wondering if it wouldn't be better just to head back to the windows platform.. What a mess this has become on the open source platform. Grant it could be hardware (ok maybe its me and the kernel not agreeing) as this is just a development system that appears to have kernel compatible hardware. Does anyone out there have any encouraging words, howto docs or knowledge of commercial applications/support that are known to work for Centos5? Much thanks in advance.

3 2

ext3 inode and journal limitation
by Centos 09 Sep '07

09 Sep '07

Hello what is the limitation of inode and journaling on 32 bit ext3 file system. what about 64 bit. Thanks

4 4

LVM problem
by Kuang-Chun Cheng 09 Sep '07

09 Sep '07

Hi, I have CentOS 5.0 which use an old hard disk. And recently I found there are some bad sector on it ... I try to backup my data to other CentOS 5.0 box .... What I did is. I remove the old HD (with bad sector) and install it as a slave IDE on a working CentOS 5.0 ... I try to mount the old HD as /mnt/oldDisk but since it's a LVM, the "mount -t ext3" doesn't work. I'm new to LVM ... could someone help me on this. Also, there is a problem I found. Both HD have the same VG called /dev/VolGroup00 ... server:[root]/dev> pvscan PV /dev/hdb2 VG VolGroup00 lvm2 [76.22 GB / 0 free] PV /dev/hda2 VG VolGroup00 lvm2 [76.22 GB / 0 free] Total: 2 [152.44 GB] / in use: 2 [152.44 GB] / in no VG: 0 [0 ] where the /dev/hdb2 is the old one with bad sector ... and it's unmounted. The /dev/hda2 is the root filesystem of the working CentOS 5.0 Regards KC

3 2

Subject: How do I recover from a corrupt fstab file on reboot?
by chuck 09 Sep '07

09 Sep '07

I am using CENTOS 5 and I am stuck where I have to repair my boot loader and all of the files are read only so I cannot fix them. How do I get around this? Thanks Chuck

3 3

Re: Re: imap webmail client needed
by Sokol 09 Sep '07

09 Sep '07

> Date: Sat, 8 Sep 2007 12:33:52 -0500 (CDT) > From: Barry Brimer <lists(a)brimer.org> > Subject: Re: [CentOS] imap webmail client needed > To: CentOS mailing list <centos(a)centos.org> > Message-ID: <Pine.LNX.4.61.0709081218340.2473(a)localhost.localdomain> > Content-Type: text/plain; charset="utf-8" > >> Hi list, >> >> IÂ´m searching a webmail imap client including a calendar and a todo list >> (last is not necessary) for 2 or 3 users. I have tried zimbra but itÂ´s too >> oversized for my claim. >> Do someone have a hint? >> Thanks. > > I prefer Horde, which is available in the CentOS Extras repository. The > horde website is horde.org > > Barry > > ------------------------------ Hi, I' ve checked squirrelmail and horde both and decide to use horde due to horde's webinterface looks more attractive to me. I will miss roundcube's ajax webinterface but horde give me the features I need. Thank you guys!

1 0

Re: [CentOS] Why CentOS as a webhosting platform
by Lanny Marcus 09 Sep '07

09 Sep '07

On 06 September 2007, Karanbir Singh <mail-lists(a)karan.org> wrote: > > CentOS seems to be doing really well in the hosting business these > days, and even for people who would normally have used Windows or OSX > on the hosting previously, are now looking at using CentOS. And I > thought it would be nice to have a section on the wiki about exactly > why that is. > Another question is why not to use CentOS. My web hosting ISP (OLM) doesn't use it. I can't imagine why not. It would seem to be more stable and have a longer life, etc. I would prefer they use CentOS, but, my web sites are on shared hosting.

1 0

Re: [CentOS] Re: OT: Suggestions for RAID HW for 2 SATA drives in
by Lanny Marcus 09 Sep '07

09 Sep '07

On 04 September 2007, Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> wrote: > Message: 1 > Date: Tue, 04 Sep 2007 09:12:34 -0400 > From: Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> <snip> > No new partition is needed. VMware virtual disks are created as files > within the hosts OS. That's not a lot of free space to play with, but > enough to experiment with. Here's a sample of a directory of assorted > VMware VMs: > > [prs@lynx vmware]$ du -sh * > 23G C5_64 > 4.0G CentOS_3_9 > 4.7G CentOS-QA > 6.7G fedora-7-i386 > 4.1G PCLinuxOS_2007 > 21G W2K_Pro > 22G XP Phil: Thank you! Not sure if I have enough space available, but I am going to try this. :-) Lanny

1 0

Kernel debug info?
by Ross S. W. Walker 09 Sep '07

09 Sep '07

Ok, I got blktrace installed, but I also have some blktrace system taps that I want to test out, but it seems I need to have the kernel debug info installed to get systemtap working. Anyone know where the CentOS kernel-debuginfo RPMs are located? Ross S. W. Walker Information Systems Manager Medallion Financial, Corp. 437 Madison Avenue 38th Floor New York, NY 10022 Tel: (212) 328-2165 Fax: (212) 328-2125 WWW: http://www.medallion.com <http://www.medallion.com/> ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

3 5

Where is the blktrace utility?
by Ross S. W. Walker 08 Sep '07

08 Sep '07

I keep reading that RHEL/CentOS 5 supports blktrace, but I can't seem to find the blktrace/blkparse utilities. Is it that just the functionality is available in the kernel, but the user is left to have to hunt down the latest versions of the utilities on the net? If anybody knows where to get the latest versions of these utilities I would greatly appreciate it. Ross S. W. Walker Information Systems Manager Medallion Financial, Corp. 437 Madison Avenue 38th Floor New York, NY 10022 Tel: (212) 328-2165 Fax: (212) 328-2125 WWW: http://www.medallion.com <http://www.medallion.com/> ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

4 4

CentOS promotion team at T-DOSE in Eindhoven (NL) on 13-14 Oct 2007
by Dag Wieers 08 Sep '07

08 Sep '07

Hi everybody, CentOS will be present for the first time at the Technical Dutch Open Source Event (T-DOSE) in Eindhoven, NL. We have a booth at the entrance as well as a presentation about Virtualization, presented by Daniel de Kok (danieldk). No doubt the presentation will include information about the new CentOS Virtualization SIG ! (Other topics are still accepted for T-DOSE) If you're interested to be more involved with CentOS, helping out at the booth, volunteering to give a presentation or organising your own presence or event is a good way to meet CentOS community members and users. Feel free to contact me for more information or join the centos-promo mailinglist and introduce yourself. More information about the T-DOSE event and other events is available from: http://wiki.centos.org/Events Hope to see you there ! -- -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [Any errors in spelling, tact or fact are transmission errors]

1 0

CentOS-announce Digest, Vol 31, Issue 5
by centos-announce-request＠centos.org 08 Sep '07

08 Sep '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0892 Important CentOS 5 i386 krb5 Update (Karanbir Singh) 2. CESA-2007:0892 Important CentOS 5 x86_64 krb5 Update (Karanbir Singh) 3. CESA-2007:0774 Moderate CentOS 4 ia64 kernel - security update (Pasi Pirhonen) 4. CESA-2007:0774 Moderate CentOS 4 s390(x) kernel - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 7 Sep 2007 14:58:22 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2007:0892 Important CentOS 5 i386 krb5 Update To: centos-announce(a)centos.org Message-ID: <20070907135822.GA9041(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2007:0892 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: a1d0cdc2d0aee3ccc91570be993235fb krb5-devel-1.5-29.i386.rpm a8bc7053d1fd39e314dfc661cc002863 krb5-libs-1.5-29.i386.rpm 9fe17f11a71022293df4e0a525878e88 krb5-server-1.5-29.i386.rpm becc87a5fe8617951fd9627698bf56e7 krb5-workstation-1.5-29.i386.rpm Source: a5eab669d31c125ad810e3af7c6e6f14 krb5-1.5-29.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 7 Sep 2007 14:58:22 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2007:0892 Important CentOS 5 x86_64 krb5 Update To: centos-announce(a)centos.org Message-ID: <20070907135822.GA9056(a)base.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2007:0892 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: a1d0cdc2d0aee3ccc91570be993235fb krb5-devel-1.5-29.i386.rpm 487e0ba94deb2471964ed57d816e64b1 krb5-devel-1.5-29.x86_64.rpm a8bc7053d1fd39e314dfc661cc002863 krb5-libs-1.5-29.i386.rpm 75e61ecc62ced140b3499f2faa988433 krb5-libs-1.5-29.x86_64.rpm 4d8aa721603b574cf7fb87395e1e693d krb5-server-1.5-29.x86_64.rpm a2976a29ca09f0d5aadb0c8a02b2fc93 krb5-workstation-1.5-29.x86_64.rpm Source: a5eab669d31c125ad810e3af7c6e6f14 krb5-1.5-29.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Sat, 8 Sep 2007 00:31:08 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0774 Moderate CentOS 4 ia64 kernel - security update To: centos-announce(a)centos.org Message-ID: <20070907213108.GH18557(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0774 https://rhn.redhat.com/errata/RHSA-2007-0774.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/kernel-2.6.9-55.0.6.EL.ia64.rpm updates/ia64/RPMS/kernel-devel-2.6.9-55.0.6.EL.ia64.rpm updates/ia64/RPMS/kernel-largesmp-2.6.9-55.0.6.EL.ia64.rpm updates/ia64/RPMS/kernel-largesmp-devel-2.6.9-55.0.6.EL.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

asking for a repo
by manny＠cmc.cfg.sld.cu 08 Sep '07

08 Sep '07

Surfing on the web I had found a repo, I want to know how safe it is??? the URL is http://www.alcancelibre.org/al/el5/ sorry if a make any mistake on my writing. thanks to all -- “Nuestra recompensa se encuentra en el esfuerzo y no en el resultado. Un esfuerzo total es una victoria completa”. Mahatma Gandhi

1 0

Re: [CentOS] Virtual Hosting
by Lanny Marcus 07 Sep '07

07 Sep '07

On 01 September 2007, William Warren <hescominsoon(a)emmanuelcomputerconsulting.com> wrote: > Message: 3 <snip> > you can also go with webmin to configure this stuff..<G> If you use Webmin, at this time, it is probably not a good idea to use SELinux with it. I have a very recent thread about this and there is a bug on Webmin. The SELinux folks are aware of it. Below is about SELinux. Lanny > This explanation and description of the problem are fine. We probably > need a custom policy for webmin to allow iptables to write to scripts > running as webmin, since catching stderr is important. There is no > file context that can be set to allow this. As I recall from the > original bug report, iptables was also trying to communicate with > another open file descriptor. This one I beleive should be closed on > exec.

3 2

Help with External USB drive on RH/Centos 5
by Scott Ehrlich 07 Sep '07

07 Sep '07

Another issue to tackle - I have an external 1 TB drive (2 500GB on a RAID). When I plug it into the server, it sees, via /var/log/messages, that a USB device was plugged in, but that's it. fdisk -l doesn't see it. dmesg doesn't do much, either. It is a Western Digital My Book II device. I want to format it and use it for external storage, but can't until I get to it. What is the best way to get to the drive? Thanks. Scott

2 2

RE: [CentOS] NIS binding probs w/Firewall and SELinux
by Plant, Dean 07 Sep '07

07 Sep '07

Scott Ehrlich wrote: > > Is there a file I can edit to ensure SELinux is disabled? The > system was initially installed with SELinux Enabled, then disabled > later by me. Are you aware of the commands getenforce & setenforce? Dean

2 2

Problems in x86_64 Centos 5
by Erkki.Aalto＠Helsinki.FI 07 Sep '07

07 Sep '07

We upgraded a 64 bit server from Centos 4 to 5 and encountered some strange problems. Tcsh segfaulted irregurarily and emacs gave irregurarily strange error messages about regular expressions. Both problems disappeared when a 32-bit version was installed instead of the 64-bit. Ldconfig still occasionally segfaults. 64-bit servers where Centos 5 was installed from scratch have no problems. It is like there were some sort of remnant of the previous OS, but I can't figure out where. Strace of a 64-bit tcsh usually ends like this: open("/usr/lib/locale/locale-archive", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=55537056, ...}) = 0 mmap(NULL, 55537056, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaaaaae0000 close(3) = 0 brk(0) = 0x15b30000 brk(0x15b30800) = 0x15b30000 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ and ltrace gives: __libc_start_main(0x405180, 1, 0x7fff89087298, 0x440b30, 0x440b20 <unfinished ...> setlocale(5, "" <unfinished ...> sbrk(0) = 0x141f1000 sbrk(2048) = 0xffffffffffffffff --- SIGSEGV (Segmentation fault) --- +++ killed by SIGSEGV +++ Does anyone have any ideas? -- Erkki 'Örkki' Aalto "Life is divided up into Internet: Erkki.Aalto(a)Helsinki.FI the horrible and the miserable" Snail: P.O. Box 64 FI-00014 University of Helsinki, Finland

4 4

unable to add IP address to eth0:0 eth0:1 etc
by Ray Leventhal 07 Sep '07

07 Sep '07

Hi all, I need to (quickly!grrr) update IP addresses for which a given machine will answer. I did this: /sbin/ifconfig eth0:0 xx.xx.xx.10 netmask 255.255.255.0 /sbin/ifconfig eth0:1 xx.xx.xx.11 netmask 255.255.255.0 /sbin/ifconfig eth0:2 xx.xx.xx.30 netmask 255.255.255.0 /sbin/ifconfig eth0:3 xx.xx.xx.31 netmask 255.255.255.0 /sbin/ifconfig eth0:4 xx.xx.xx.13 netmask 255.255.255.0 /sbin/ifconfig eth0:5 xx.xx.xx.15 netmask 255.255.255.0 /sbin/ifconfig eth0:6 xx.xx.xx.20 netmask 255.255.255.0 /sbin/ifconfig eth0:7 xx.xx.xx.21 netmask 255.255.255.0 /sbin/ifconfig eth0:8 xx.xx.xx.22 netmask 255.255.255.0 but on looking at the output of /sbin/ifconfig, I see this: [root@sunspot ray]# /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:64.135.16.15 Bcast:64.135.16.255 Mask:255.255.255.0 inet6 addr: fe80::200:c5ff:fec2:1b01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5491775 errors:0 dropped:0 overruns:0 frame:0 TX packets:962501 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:436018277 (415.8 MiB) TX bytes:156248463 (149.0 MiB) Interrupt:12 Base address:0xcf00 eth0:0 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.10 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:1 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.11 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:2 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.30 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:3 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.31 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:4 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.13 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:5 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.15 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:6 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.20 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:7 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.21 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 eth0:8 Link encap:Ethernet HWaddr 00:00:C5:C2:1B:01 inet addr:xx.xx.xx.22 Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:12 Base address:0xcf00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5744 errors:0 dropped:0 overruns:0 frame:0 TX packets:5744 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:591811 (577.9 KiB) TX bytes:591811 (577.9 KiB) And this, in /var/log/messages [root@sunspot ray]# tail /var/log/messages Sep 7 06:50:31 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.15 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.20 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Withdrawing address record for xx.xx.xx.20 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.20 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.21 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Withdrawing address record for xx.xx.xx.21 on eth0. Sep 7 06:50:31 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.21 on eth0. Sep 7 06:50:33 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.22 on eth0. Sep 7 06:50:33 sunspot avahi-daemon[2203]: Withdrawing address record for xx.xx.xx.22 on eth0. Sep 7 06:50:33 sunspot avahi-daemon[2203]: Registering new address record for xx.xx.xx.22 on eth0. How can I get my NIC to accept traffic for these IPs? Thanks In Advance, ~Ray

5 20

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss