- Discuss - lists.centos.org

centos 5 and cpuspeed
by Jerry Geis 06 Sep '07

06 Sep '07

In older version of centos there was cpuspeed -d running that controlled current speed. In centos 5 it is set for on demand and cpuspeed is not running. I can startup cpuspeed and send it a signal SIGUSR1 to go full speed. This works. However, What is the correct or prefered method to control the cpuspeed in centos 5? THere are times when I want to tell the machine to go full speed and other drop back. THanks, Jerry

1 0

RE: [CentOS] Places > Connect to Server > Windows Share Doesn't workfor me
by Juan C. Valido 06 Sep '07

06 Sep '07

On Thu, 2007-09-06 at 07:33 -0400, Michael Velez wrote: > > > > -----Original Message----- > > From: centos-bounces(a)centos.org > > [mailto:centos-bounces@centos.org] On Behalf Of Juan C. Valido > > Sent: Thursday, September 06, 2007 5:33 AM > > To: centos(a)centos.org > > Subject: [CentOS] Places > Connect to Server > Windows Share > > Doesn't workfor me > > > > This is not too Important but Places > Connect to Server > > > Windows Share Doesn't work for me also Places > Network > > Servers > Windows Network doesn't work for me either. Samba, > > Mapping Windows Shares and Print Sharing work fine. Just > > curious, Thanks > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > Could this be due to a firewall reason? Did you try it without the > firewall? > > Michael > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos No I disabled the firewall and selinux and the firewall on the Windows Server and no dice. Thanks.

1 0

Places > Connect to Server > Windows Share Doesn't work for me
by Juan C. Valido 06 Sep '07

06 Sep '07

This is not too Important but Places > Connect to Server > Windows Share Doesn't work for me also Places > Network Servers > Windows Network doesn't work for me either. Samba, Mapping Windows Shares and Print Sharing work fine. Just curious, Thanks

3 5

Centos 5 pam system-auth changes?
by Les Mikesell 06 Sep '07

06 Sep '07

Can someone explain the changes in the system PAM setup for Centos5 vs. earlier verions? I have servers configured to use SMB authentication against a Windows domain controller so I don't have to deal with separate passwords. That still works the same for users that actually have local accounts. However, on some machines I also build the mod_auth_pam module for apache and use an /etc/pam.d/httpd file like: #%PAM-1.0 auth required pam_stack.so service=system-auth account required pam_permit.so The 'account' line is supposed to let anyone in, even if they don't have any local account info so everyone with a domain login/password can access the password protected web pages. On Centos5, apache authentication with mod_auth_pam still requires a local account. I think this entry in /etc/pam.d/system-auth may be the problem: auth requisite pam_succeed_if.so uid >= 500 quiet Does that mean pam is going to fail if it can't find account info during the auth phase? How can I make apache use all the system-auth ways to check a password without necessarily needing a local account? (If someone does have a local account with a local password, I want that to work too). -- Les Mikesell lesmikesell(a)gmail.com

1 0

rpmforge checksum errors
by Kai Schaetzl 06 Sep '07

06 Sep '07

Almost each time I want to use rpmforge with yum I get a "Metadata file does not meet checksum" error. Yum usually has to try at least five mirrors before it succeeds, sometimes it doesn't find a mirror with a useable file. This is with CentOS 5. Is this a known issue with rpmforge lately? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

7 13

Server crashes...
by Jason Pyeron 06 Sep '07

06 Sep '07

This was due to a ProxyRequests On Let this be a lesson to all. [root@localhost log]# cat /proc/net/ip_conntrack | wc -l 11042 [root@localhost log]# cat /proc/sys/net/ipv4/ip_conntrack_max 28632 [root@localhost log]# cat /var/log/messages ... Sep 2 04:04:30 localhost kernel: printk: 213 messages suppressed. Sep 2 04:04:30 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:04:30 localhost last message repeated 9 times Sep 2 04:04:35 localhost kernel: printk: 675 messages suppressed. Sep 2 04:04:35 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:04:40 localhost kernel: printk: 518 messages suppressed. Sep 2 04:04:40 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:04:46 localhost kernel: printk: 715 messages suppressed. Sep 2 04:04:46 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:04:50 localhost kernel: printk: 241 messages suppressed. Sep 2 04:04:50 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:04:55 localhost kernel: printk: 246 messages suppressed. Sep 2 04:04:55 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:00 localhost kernel: printk: 593 messages suppressed. Sep 2 04:05:00 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:05 localhost kernel: printk: 288 messages suppressed. Sep 2 04:05:05 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:10 localhost kernel: printk: 460 messages suppressed. Sep 2 04:05:10 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:15 localhost kernel: printk: 364 messages suppressed. Sep 2 04:05:15 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:20 localhost kernel: printk: 339 messages suppressed. Sep 2 04:05:20 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:27 localhost kernel: printk: 542 messages suppressed. Sep 2 04:05:27 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:30 localhost kernel: printk: 164 messages suppressed. Sep 2 04:05:30 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:35 localhost kernel: printk: 200 messages suppressed. Sep 2 04:05:35 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 04:05:40 localhost kernel: printk: 837 messages suppressed. Sep 2 04:05:40 localhost kernel: ip_conntrack: table full, dropping packet. ... Sep 2 05:25:54 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:25:59 localhost sshd[1184]: Bad protocol version identification 'GET http://www.it-secure-x.de/cgi- bin/proxytest.pl HTTP/1.1' from 74.52.216.118 Sep 2 05:25:59 localhost kernel: printk: 416 messages suppressed. Sep 2 05:25:59 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:03 localhost sshd[1185]: Did not receive identification string from 74.52.216.118 Sep 2 05:26:05 localhost kernel: printk: 471 messages suppressed. Sep 2 05:26:05 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:09 localhost kernel: printk: 402 messages suppressed. Sep 2 05:26:09 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:14 localhost kernel: printk: 532 messages suppressed. Sep 2 05:26:14 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:19 localhost kernel: printk: 449 messages suppressed. Sep 2 05:26:19 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:25 localhost kernel: printk: 523 messages suppressed. Sep 2 05:26:25 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:29 localhost kernel: printk: 402 messages suppressed. Sep 2 05:26:29 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:34 localhost kernel: printk: 585 messages suppressed. Sep 2 05:26:34 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:39 localhost kernel: printk: 351 messages suppressed. Sep 2 05:26:39 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:45 localhost kernel: printk: 346 messages suppressed. Sep 2 05:26:45 localhost kernel: ip_conntrack: table full, dropping packet. Sep 2 05:26:50 localhost kernel: printk: 348 messages suppressed. Sep 2 05:26:50 localhost kernel: ip_conntrack: table full, dropping packet. ... [root@localhost log]# netstat -n Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:80 124.234.65.55:2058 SYN_RECV tcp 0 0 localhost:80 211.103.128.148:3232 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:1320 SYN_RECV tcp 0 0 localhost:80 204.15.74.53:2661 SYN_RECV tcp 0 0 localhost:80 124.135.20.40:2279 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3302 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3196 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:1575 SYN_RECV tcp 0 0 localhost:80 220.226.206.14:3450 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:57259 SYN_RECV tcp 0 0 localhost:80 69.31.80.90:59512 SYN_RECV tcp 0 0 localhost:80 125.77.84.119:2680 SYN_RECV tcp 0 0 localhost:80 60.26.116.241:4486 SYN_RECV tcp 0 0 localhost:80 72.232.85.106:5047 SYN_RECV tcp 0 0 localhost:80 72.232.127.218:2208 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:1790 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62565 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:1403 SYN_RECV tcp 0 0 localhost:80 219.119.24.62:41464 SYN_RECV tcp 0 0 localhost:80 72.4.160.169:47442 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:4689 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:2481 SYN_RECV tcp 0 0 localhost:80 222.183.118.142:3562 SYN_RECV tcp 0 0 localhost:80 75.37.103.134:52357 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:2462 SYN_RECV tcp 0 0 localhost:80 72.232.185.146:59910 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:1714 SYN_RECV tcp 0 0 localhost:80 204.9.190.29:2934 SYN_RECV tcp 0 0 localhost:80 66.97.163.6:2480 SYN_RECV tcp 0 0 localhost:80 123.118.112.109:3024 SYN_RECV tcp 0 0 localhost:80 204.9.190.25:3791 SYN_RECV tcp 0 0 localhost:80 210.240.195.205:51703 SYN_RECV tcp 0 0 localhost:80 125.90.204.37:3169 SYN_RECV tcp 0 0 localhost:80 83.167.112.34:22113 SYN_RECV tcp 0 0 localhost:80 116.217.45.118:1047 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:63494 SYN_RECV tcp 0 0 localhost:80 116.217.45.118:1044 SYN_RECV tcp 0 0 localhost:80 71.194.222.215:1775 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:2679 SYN_RECV tcp 0 0 localhost:80 72.36.194.202:4946 SYN_RECV tcp 0 0 localhost:80 66.199.253.130:57095 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:63451 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62954 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:2192 SYN_RECV tcp 0 0 localhost:80 72.232.110.98:3768 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:1341 SYN_RECV tcp 0 0 localhost:80 67.187.249.55:56415 SYN_RECV tcp 0 0 localhost:80 204.15.77.99:1828 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:2141 SYN_RECV tcp 0 0 localhost:80 68.148.147.180:63660 SYN_RECV tcp 0 0 localhost:80 222.183.118.142:1565 SYN_RECV tcp 0 0 localhost:80 60.28.157.113:1555 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:10307 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:3005 SYN_RECV tcp 0 0 localhost:80 124.44.87.67:2538 SYN_RECV tcp 0 0 localhost:80 72.232.196.226:61345 SYN_RECV tcp 0 0 localhost:80 38.100.202.162:2463 SYN_RECV tcp 0 0 localhost:80 222.141.201.109:4156 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:1235 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:1629 SYN_RECV tcp 0 0 localhost:80 74.52.180.114:1048 SYN_RECV tcp 0 0 localhost:80 222.233.52.154:2122 SYN_RECV tcp 0 0 localhost:80 219.157.127.212:2598 SYN_RECV tcp 0 0 localhost:80 85.140.168.119:3888 SYN_RECV tcp 0 0 localhost:80 204.9.190.27:2011 SYN_RECV tcp 0 0 localhost:80 64.38.31.186:4141 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:61970 SYN_RECV tcp 0 0 localhost:80 64.38.31.186:1483 SYN_RECV tcp 0 0 localhost:80 72.232.234.146:53209 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:1504 SYN_RECV tcp 0 0 localhost:80 211.147.250.144:3490 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:1370 SYN_RECV tcp 0 0 localhost:80 125.34.208.41:3124 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3632 SYN_RECV tcp 0 0 localhost:80 222.233.52.155:2331 SYN_RECV tcp 0 0 localhost:80 218.6.9.138:4050 SYN_RECV tcp 0 0 localhost:80 123.8.4.247:8047 SYN_RECV tcp 0 0 localhost:80 72.36.194.202:2298 SYN_RECV tcp 0 0 localhost:80 38.100.200.237:2670 SYN_RECV tcp 0 0 localhost:80 218.18.214.101:61645 SYN_RECV tcp 0 0 localhost:80 58.55.15.112:2255 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:36569 SYN_RECV tcp 0 0 localhost:80 58.65.236.137:56193 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:3413 SYN_RECV tcp 0 0 localhost:80 209.67.215.82:36425 SYN_RECV tcp 0 0 localhost:80 202.175.187.88:1504 SYN_RECV tcp 0 0 localhost:80 204.9.190.20:4647 SYN_RECV tcp 0 0 localhost:80 72.232.85.106:3968 SYN_RECV tcp 0 0 localhost:80 75.11.36.115:25290 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:2735 SYN_RECV tcp 0 0 localhost:80 123.52.138.204:2147 SYN_RECV tcp 0 0 localhost:80 218.21.37.94:2110 SYN_RECV tcp 0 0 localhost:80 116.24.10.183:1670 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62448 SYN_RECV tcp 0 0 localhost:80 204.15.74.55:2707 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:2468 SYN_RECV tcp 0 0 localhost:80 219.237.162.2:2215 SYN_RECV tcp 0 0 localhost:80 204.13.169.13:2565 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62871 SYN_RECV tcp 0 0 localhost:80 72.36.130.74:4680 SYN_RECV tcp 0 0 localhost:80 124.64.83.34:1231 SYN_RECV tcp 0 0 localhost:80 219.254.32.110:4728 SYN_RECV tcp 0 0 localhost:80 222.233.52.152:4510 SYN_RECV tcp 0 0 localhost:80 67.18.216.106:3479 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3812 SYN_RECV tcp 0 0 localhost:80 222.233.52.159:3450 SYN_RECV tcp 0 0 localhost:80 222.183.129.41:1638 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:3854 SYN_RECV tcp 0 0 localhost:80 72.232.110.18:2139 SYN_RECV tcp 0 0 localhost:80 222.233.52.159:4702 SYN_RECV tcp 0 0 localhost:80 219.136.252.84:1802 SYN_RECV tcp 0 0 localhost:80 222.183.124.182:3062 SYN_RECV tcp 0 0 localhost:80 222.183.129.240:2251 SYN_RECV tcp 0 0 localhost:80 125.77.78.144:2697 SYN_RECV tcp 0 0 localhost:80 211.17.77.47:63043 SYN_RECV tcp 0 0 localhost:80 66.197.155.21:1640 SYN_RECV tcp 0 0 localhost:80 121.34.73.131:3705 SYN_RECV tcp 0 0 localhost:80 204.15.74.53:4227 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:33227 SYN_RECV tcp 0 0 localhost:80 204.15.74.51:1210 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:59313 SYN_RECV tcp 0 0 localhost:80 124.97.128.106:3632 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:2535 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:22111 SYN_RECV tcp 0 0 localhost:80 204.15.73.163:4984 SYN_RECV tcp 0 0 localhost:80 65.29.65.93:61031 SYN_RECV tcp 0 0 localhost:80 219.117.198.149:32896 SYN_RECV tcp 0 0 localhost:80 209.67.215.82:36613 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63166 SYN_RECV tcp 0 0 localhost:80 125.34.208.156:4359 SYN_RECV tcp 0 0 localhost:80 219.119.24.62:35381 SYN_RECV tcp 0 0 localhost:80 86.108.34.132:2552 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:35952 SYN_RECV tcp 0 0 localhost:80 72.232.196.226:61306 SYN_RECV tcp 0 0 localhost:80 222.183.129.240:3721 SYN_RECV tcp 0 0 localhost:80 121.34.73.131:3571 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:2353 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:61351 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63812 SYN_RECV tcp 0 0 localhost:80 222.233.52.153:1869 SYN_RECV tcp 0 0 localhost:80 222.233.52.152:4584 SYN_RECV tcp 0 0 localhost:80 72.36.247.90:58667 SYN_RECV tcp 0 0 localhost:80 72.232.196.226:65083 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:2356 SYN_RECV tcp 0 0 localhost:80 211.103.128.153:3166 SYN_RECV tcp 0 0 localhost:80 124.135.20.40:3063 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3878 SYN_RECV tcp 0 0 localhost:80 123.52.138.204:2083 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:2081 SYN_RECV tcp 0 0 localhost:80 58.211.42.246:1394 SYN_RECV tcp 0 0 localhost:80 123.52.138.204:4489 SYN_RECV tcp 0 0 localhost:80 219.133.48.219:50412 SYN_RECV tcp 0 0 localhost:80 66.199.253.130:55196 SYN_RECV tcp 0 0 localhost:80 211.17.77.47:60971 SYN_RECV tcp 0 0 localhost:80 123.55.225.66:3651 SYN_RECV tcp 0 0 localhost:80 218.18.214.101:60449 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:1220 SYN_RECV tcp 0 0 localhost:80 220.189.22.100:38027 SYN_RECV tcp 0 0 localhost:80 72.232.127.202:4454 SYN_RECV tcp 0 0 localhost:80 72.36.194.202:1487 SYN_RECV tcp 0 0 localhost:80 124.64.83.24:1797 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:57870 SYN_RECV tcp 0 0 localhost:80 75.177.24.203:60061 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:2962 SYN_RECV tcp 0 0 localhost:80 219.237.162.2:4072 SYN_RECV tcp 0 0 localhost:80 222.130.182.3:1878 SYN_RECV tcp 0 0 localhost:80 60.28.157.113:2185 SYN_RECV tcp 0 0 localhost:80 204.15.77.100:4174 SYN_RECV tcp 0 0 localhost:80 219.153.141.232:4854 SYN_RECV tcp 0 0 localhost:80 67.81.127.61:34133 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:1955 SYN_RECV tcp 0 0 localhost:80 38.100.200.236:3853 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63594 SYN_RECV tcp 0 0 localhost:80 219.254.32.112:3258 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62369 SYN_RECV tcp 0 0 localhost:80 58.55.15.112:2037 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62699 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:54877 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:36604 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62502 SYN_RECV tcp 0 0 localhost:80 123.118.112.109:2836 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:40638 SYN_RECV tcp 0 0 localhost:80 222.183.118.142:1387 SYN_RECV tcp 0 0 localhost:80 74.52.144.18:51858 SYN_RECV tcp 0 0 localhost:80 194.126.180.10:4138 SYN_RECV tcp 0 0 localhost:80 194.126.180.10:1810 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:2214 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:47439 SYN_RECV tcp 0 0 localhost:80 124.72.18.95:2830 SYN_RECV tcp 0 0 localhost:80 72.232.138.196:57715 SYN_RECV tcp 0 0 localhost:80 64.151.124.42:39206 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:3886 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:48712 SYN_RECV tcp 0 0 localhost:80 219.119.24.62:41462 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:22496 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63733 SYN_RECV tcp 0 0 localhost:80 123.8.4.247:9720 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:4060 SYN_RECV tcp 0 0 localhost:80 71.194.222.215:4020 SYN_RECV tcp 0 0 localhost:80 72.36.247.90:58698 SYN_RECV tcp 0 0 localhost:80 201.228.178.11:64667 SYN_RECV tcp 0 0 localhost:80 202.175.187.88:2431 SYN_RECV tcp 0 0 localhost:80 125.37.251.229:3625 SYN_RECV tcp 0 0 localhost:80 58.211.42.248:2825 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:63377 SYN_RECV tcp 0 0 localhost:80 66.199.236.26:1257 SYN_RECV tcp 0 0 localhost:80 222.233.52.157:1585 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:2922 SYN_RECV tcp 0 0 localhost:80 66.97.163.7:3944 SYN_RECV tcp 0 0 localhost:80 204.13.169.10:3587 SYN_RECV tcp 0 0 localhost:80 60.28.157.113:2623 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63556 SYN_RECV tcp 0 0 localhost:80 72.232.127.202:5078 SYN_RECV tcp 0 0 localhost:80 64.151.124.42:38929 SYN_RECV tcp 0 0 localhost:80 58.211.42.245:2419 SYN_RECV tcp 0 0 localhost:80 64.191.90.229:4428 SYN_RECV tcp 0 0 localhost:80 204.15.73.172:1524 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:1703 SYN_RECV tcp 0 0 localhost:80 209.67.215.82:36826 SYN_RECV tcp 0 0 localhost:80 72.36.194.202:2002 SYN_RECV tcp 0 0 localhost:80 61.181.230.171:1354 SYN_RECV tcp 0 0 localhost:80 72.36.170.226:4851 SYN_RECV tcp 0 0 localhost:80 202.75.225.12:3065 SYN_RECV tcp 0 0 localhost:80 87.103.161.78:4643 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:4741 SYN_RECV tcp 0 0 localhost:80 66.199.253.130:54353 SYN_RECV tcp 0 0 localhost:80 64.180.155.73:4677 SYN_RECV tcp 0 0 localhost:80 58.187.121.173:10372 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:44000 SYN_RECV tcp 0 0 localhost:80 195.182.156.68:14070 SYN_RECV tcp 0 0 localhost:80 204.15.77.99:2805 SYN_RECV tcp 0 0 localhost:80 58.61.164.203:55395 SYN_RECV tcp 0 0 localhost:80 72.232.234.146:53849 SYN_RECV tcp 0 0 localhost:80 125.77.78.144:4566 SYN_RECV tcp 0 0 localhost:80 219.136.252.84:2899 SYN_RECV tcp 0 0 localhost:80 213.213.249.145:60180 SYN_RECV tcp 0 0 localhost:80 123.118.112.109:1418 SYN_RECV tcp 0 0 localhost:80 123.55.225.66:2833 SYN_RECV tcp 0 0 localhost:80 216.195.34.89:35100 SYN_RECV tcp 0 0 localhost:80 61.145.99.86:49917 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62860 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:4141 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:2714 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:59050 SYN_RECV tcp 0 0 localhost:80 222.82.69.156:2760 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:38389 SYN_RECV tcp 0 0 localhost:80 125.82.50.61:4062 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:4470 SYN_RECV tcp 0 0 localhost:80 72.11.188.27:62562 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:3593 SYN_RECV tcp 0 0 localhost:80 72.232.110.114:1787 SYN_RECV tcp 0 0 localhost:80 204.15.74.62:3625 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63539 SYN_RECV tcp 0 0 localhost:80 72.232.110.90:5088 SYN_RECV tcp 0 0 localhost:80 72.36.170.242:4153 SYN_RECV tcp 0 0 localhost:80 124.72.18.95:3274 SYN_RECV tcp 0 0 localhost:80 209.67.215.82:35947 SYN_RECV tcp 0 0 localhost:80 222.82.69.156:4102 SYN_RECV tcp 0 0 localhost:80 222.130.182.3:2768 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:2953 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:64664 SYN_RECV tcp 0 0 localhost:80 72.232.110.106:5085 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62457 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:3201 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:2992 SYN_RECV tcp 0 0 localhost:80 204.15.77.100:3036 SYN_RECV tcp 0 0 localhost:80 66.199.253.130:55567 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62909 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:1187 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:63396 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:1682 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:2544 SYN_RECV tcp 0 0 localhost:80 75.109.12.140:2133 SYN_RECV tcp 0 0 localhost:80 72.232.196.226:63860 SYN_RECV tcp 0 0 localhost:80 221.214.239.18:54548 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:35433 SYN_RECV tcp 0 0 localhost:80 67.18.216.106:4221 SYN_RECV tcp 0 0 localhost:80 204.15.73.173:3174 SYN_RECV tcp 0 0 localhost:80 74.52.180.114:2301 SYN_RECV tcp 0 0 localhost:80 89.31.89.51:2109 SYN_RECV tcp 0 0 localhost:80 67.18.216.106:3475 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:3890 SYN_RECV tcp 0 0 localhost:80 87.70.11.202:2310 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62552 SYN_RECV tcp 0 0 localhost:80 124.135.20.40:2890 SYN_RECV tcp 0 0 localhost:80 195.182.156.68:17752 SYN_RECV tcp 0 0 localhost:80 75.109.12.140:3794 SYN_RECV tcp 0 0 localhost:80 125.90.204.37:1968 SYN_RECV tcp 0 0 localhost:80 125.34.208.41:3575 SYN_RECV tcp 0 0 localhost:80 195.182.156.68:16734 SYN_RECV tcp 0 0 localhost:80 204.15.74.50:4897 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:62346 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63613 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:2169 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:4117 SYN_RECV tcp 0 0 localhost:80 123.118.113.71:2047 SYN_RECV tcp 0 0 localhost:80 222.130.182.3:3749 SYN_RECV tcp 0 0 localhost:80 85.91.116.180:3501 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:4859 SYN_RECV tcp 0 0 localhost:80 79.64.174.70:2620 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:3758 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:2679 SYN_RECV tcp 0 0 localhost:80 38.100.200.227:4892 SYN_RECV tcp 0 0 localhost:80 204.9.190.26:3535 SYN_RECV tcp 0 0 localhost:80 77.235.98.44:22375 SYN_RECV tcp 0 0 localhost:80 58.55.15.112:2705 SYN_RECV tcp 0 0 localhost:80 124.64.83.24:2540 SYN_RECV tcp 0 0 localhost:80 125.37.248.131:28431 SYN_RECV tcp 0 0 localhost:80 204.13.169.8:3175 SYN_RECV tcp 0 0 localhost:80 87.103.161.78:3168 SYN_RECV tcp 0 0 localhost:80 72.232.196.226:61859 SYN_RECV tcp 0 0 localhost:80 125.77.78.144:1490 SYN_RECV tcp 0 0 localhost:80 123.4.119.105:2817 SYN_RECV tcp 0 0 localhost:80 60.26.116.241:1293 SYN_RECV tcp 0 0 localhost:80 125.31.254.152:2872 SYN_RECV tcp 0 0 localhost:80 72.232.234.146:50586 SYN_RECV tcp 0 0 localhost:80 89.149.214.132:3860 SYN_RECV tcp 0 0 localhost:80 124.64.83.6:2645 SYN_RECV tcp 0 0 localhost:80 38.100.200.235:4565 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:40386 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62721 SYN_RECV tcp 0 0 localhost:80 72.232.20.66:2656 SYN_RECV tcp 0 0 localhost:80 75.177.24.203:60476 SYN_RECV tcp 0 0 localhost:80 222.89.236.244:2963 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:1267 SYN_RECV tcp 0 0 localhost:80 124.155.21.206:54672 SYN_RECV tcp 0 0 localhost:80 72.232.127.218:4356 SYN_RECV tcp 0 0 localhost:80 222.82.69.156:4145 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:37172 SYN_RECV tcp 0 0 localhost:80 219.133.153.77:1352 SYN_RECV tcp 0 0 localhost:80 195.69.223.130:4150 SYN_RECV tcp 0 0 localhost:80 72.232.200.210:64982 SYN_RECV tcp 0 0 localhost:80 123.4.112.176:2624 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63302 SYN_RECV tcp 0 0 localhost:80 72.36.170.226:4067 SYN_RECV tcp 0 0 localhost:80 38.100.200.235:4145 SYN_RECV tcp 0 0 localhost:80 72.232.127.202:1855 SYN_RECV tcp 0 0 localhost:80 89.169.162.16:59640 SYN_RECV tcp 0 0 localhost:80 204.9.190.24:3183 SYN_RECV tcp 0 0 localhost:80 218.95.191.167:2125 SYN_RECV tcp 0 0 localhost:80 124.44.87.67:2565 SYN_RECV tcp 0 0 localhost:80 125.37.251.229:4635 SYN_RECV tcp 0 0 localhost:80 59.56.109.116:1953 SYN_RECV tcp 0 0 localhost:80 85.91.116.180:3634 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:33209 SYN_RECV tcp 0 0 localhost:80 72.232.234.146:55030 SYN_RECV tcp 0 0 localhost:80 91.121.76.79:50655 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:56130 SYN_RECV tcp 0 0 localhost:80 209.67.215.82:36612 SYN_RECV tcp 0 0 localhost:80 222.233.52.152:3117 SYN_RECV tcp 0 0 localhost:80 85.91.116.180:3552 SYN_RECV tcp 0 0 localhost:80 85.140.195.98:4192 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:1214 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:1214 SYN_RECV tcp 0 0 localhost:80 124.72.18.95:1558 SYN_RECV tcp 0 0 localhost:80 217.205.201.122:41888 SYN_RECV tcp 0 0 localhost:80 211.17.77.47:61131 SYN_RECV tcp 0 0 localhost:80 64.151.124.42:39651 SYN_RECV tcp 0 0 localhost:80 125.90.59.68:3699 SYN_RECV tcp 0 0 localhost:80 222.233.52.156:1590 SYN_RECV tcp 0 0 localhost:80 222.183.118.142:4091 SYN_RECV tcp 0 0 localhost:80 66.199.253.130:55152 SYN_RECV tcp 0 0 localhost:80 72.232.200.210:54101 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:44797 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:32835 SYN_RECV tcp 0 0 localhost:80 218.69.15.90:46533 SYN_RECV tcp 0 0 localhost:80 222.233.52.160:4013 SYN_RECV tcp 0 0 localhost:80 59.58.62.254:42518 SYN_RECV tcp 0 0 localhost:80 125.82.50.61:1145 SYN_RECV tcp 0 0 localhost:80 60.35.116.177:4476 SYN_RECV tcp 0 0 localhost:80 72.232.200.210:53882 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62631 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63271 SYN_RECV tcp 0 0 localhost:80 190.30.35.8:3792 SYN_RECV tcp 0 0 localhost:80 58.207.128.33:3803 SYN_RECV tcp 0 0 localhost:80 124.135.20.40:4012 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:58102 SYN_RECV tcp 0 0 localhost:80 221.226.124.123:23921 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63854 SYN_RECV tcp 0 0 localhost:80 125.37.248.131:27742 SYN_RECV tcp 0 0 localhost:80 211.17.77.47:60925 SYN_RECV tcp 0 0 localhost:80 219.237.162.2:3773 SYN_RECV tcp 0 0 localhost:80 212.33.254.135:55351 SYN_RECV tcp 0 0 localhost:80 125.77.78.144:2367 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:62609 SYN_RECV tcp 0 0 localhost:80 195.182.156.68:17104 SYN_RECV tcp 0 0 localhost:80 60.26.119.123:2012 SYN_RECV tcp 0 0 localhost:80 60.26.119.123:2012 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:4903 SYN_RECV tcp 0 0 localhost:80 124.64.83.34:2975 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:48940 SYN_RECV tcp 0 0 localhost:80 89.52.129.29:62962 SYN_RECV tcp 0 0 localhost:80 204.9.190.26:3574 SYN_RECV tcp 0 0 localhost:80 124.72.18.95:1658 SYN_RECV tcp 0 0 localhost:80 59.56.127.21:63731 SYN_RECV tcp 0 0 localhost:80 72.36.239.138:1845 SYN_RECV tcp 0 0 localhost:80 58.65.236.121:33815 SYN_RECV tcp 0 0 localhost:80 124.64.83.93:1246 SYN_RECV tcp 0 0 localhost:80 222.233.52.154:4067 SYN_RECV tcp 0 0 localhost:80 90.188.131.205:44478 SYN_RECV tcp 0 0 localhost:80 59.56.108.3:3245 SYN_RECV tcp 0 0 localhost:80 72.232.110.26:5070 SYN_RECV tcp 0 0 localhost:80 116.24.107.180:3077 SYN_RECV tcp 0 0 localhost:80 77.70.106.4:5882 SYN_RECV tcp 0 0 localhost:80 38.100.200.234:2330 SYN_RECV tcp 0 0 localhost:80 222.89.236.208:4455 ESTABLISHED tcp 0 0 localhost:80 59.56.127.21:1711 TIME_WAIT tcp 0 0 localhost:80 72.232.110.42:2641 ESTABLISHED tcp 0 0 localhost:80 77.70.106.4:13781 ESTABLISHED tcp 0 0 localhost:80 75.37.103.134:54726 ESTABLISHED tcp 0 1 localhost:37671 208.67.70.3:80 LAST_ACK tcp 0 0 localhost:37505 208.67.70.3:80 TIME_WAIT tcp 0 0 localhost:80 124.64.83.6:4841 ESTABLISHED tcp 0 0 localhost:36915 216.35.75.108:80 TIME_WAIT tcp 162 0 localhost:80 75.177.24.203:60002 CLOSE_WAIT tcp 0 0 localhost:80 72.232.185.146:57283 TIME_WAIT tcp 0 0 localhost:37141 219.101.51.80:80 TIME_WAIT tcp 0 0 localhost:80 59.56.108.3:63144 ESTABLISHED tcp 0 0 localhost:80 59.56.108.3:62888 TIME_WAIT tcp 0 0 localhost:80 195.182.156.68:15761 ESTABLISHED tcp 0 0 localhost:80 58.65.236.137:56613 ESTABLISHED tcp 0 0 localhost:80 59.56.108.3:2729 TIME_WAIT tcp 0 12960 localhost:80 59.56.127.21:3756 ESTABLISHED tcp 0 0 localhost:37468 88.214.198.20:80 TIME_WAIT tcp 0 0 localhost:37468 88.214.198.20:80 TIME_WAIT tcp 38 0 localhost:80 89.31.89.51:1419 ESTABLISHED tcp 0 0 localhost:80 77.70.106.4:14550 ESTABLISHED tcp 0 0 localhost:36872 208.67.70.3:80 TIME_WAIT tcp 0 1 localhost:36886 66.37.52.232:80 SYN_SENT tcp 0 10164 localhost:80 58.187.121.173:10350 ESTABLISHED tcp 0 0 localhost:80 85.140.195.98:4052 TIME_WAIT tcp 0 0 localhost:80 66.199.253.130:57278 FIN_WAIT2 tcp 0 0 localhost:37384 213.41.23.61:80 TIME_WAIT tcp 0 0 localhost:80 72.232.110.18:4972 TIME_WAIT tcp 0 0 localhost:80 60.28.157.113:2827 TIME_WAIT tcp 0 1 localhost:80 121.10.164.117:13600 FIN_WAIT1 tcp 0 0 192.168.1.21:1521 192.168.1.21:32771 ESTABLISHED tcp 0 0 localhost:80 125.45.81.248:1408 ESTABLISHED tcp 0 0 localhost:80 116.25.7.188:64423 ESTABLISHED tcp 0 0 localhost:80 72.232.234.146:56469 ESTABLISHED tcp 0 611 localhost:80 204.13.169.18:1612 LAST_ACK tcp 0 1 localhost:37624 66.179.234.169:80 SYN_SENT tcp 0 1622 localhost:80 60.26.114.18:1935 FIN_WAIT1 tcp 0 0 localhost:37579 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:37565 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:37149 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:80 69.31.82.132:2499 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:63655 TIME_WAIT tcp 0 0 localhost:37379 66.179.234.169:80 TIME_WAIT tcp 0 1 localhost:33899 208.38.27.218:80 LAST_ACK tcp 0 0 localhost:36922 69.46.19.49:80 TIME_WAIT tcp 0 0 localhost:80 124.135.20.40:2895 ESTABLISHED tcp 0 0 localhost:80 66.199.253.130:55731 TIME_WAIT tcp 0 0 localhost:80 72.232.127.202:2390 TIME_WAIT tcp 0 0 localhost:39991 64.12.161.185:443 ESTABLISHED tcp 0 0 localhost:37042 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37033 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37032 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37023 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37044 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:37668 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37031 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:37008 66.179.234.169:80 TIME_WAIT tcp 0 449 localhost:37635 63.215.202.17:80 ESTABLISHED tcp 0 0 localhost:37006 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:36984 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:36765 69.93.6.75:80 TIME_WAIT tcp 0 0 localhost:36963 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:36968 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:36949 69.31.52.219:80 TIME_WAIT tcp 0 0 localhost:36897 66.179.234.169:80 TIME_WAIT tcp 0 1 localhost:80 59.56.108.3:62880 CLOSING tcp 0 0 localhost:36920 87.124.64.204:80 TIME_WAIT tcp 1 0 localhost:80 72.232.110.114:2050 CLOSE_WAIT tcp 0 0 localhost:37488 64.147.183.40:80 TIME_WAIT tcp 0 1 localhost:37386 63.215.202.17:80 SYN_SENT tcp 0 0 localhost:37385 63.215.202.17:80 TIME_WAIT tcp 0 430 localhost:37239 66.179.234.169:80 LAST_ACK tcp 0 720 localhost:80 58.211.42.244:4868 FIN_WAIT1 tcp 0 0 localhost:37542 63.215.202.17:80 TIME_WAIT tcp 0 0 localhost:37167 66.179.234.169:80 TIME_WAIT tcp 0 0 localhost:36518 202.28.32.43:80 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:4771 TIME_WAIT tcp 0 0 localhost:37292 66.179.234.174:80 TIME_WAIT tcp 0 0 localhost:37522 66.179.234.173:80 TIME_WAIT tcp 0 0 localhost:37267 66.179.234.174:80 TIME_WAIT tcp 0 6279 localhost:80 72.4.160.169:47618 FIN_WAIT1 tcp 0 1 localhost:37088 66.179.234.174:80 SYN_SENT tcp 0 0 localhost:37366 163.42.1.34:80 TIME_WAIT tcp 0 12960 localhost:80 59.56.109.116:4561 ESTABLISHED tcp 0 0 localhost:80 72.232.110.34:1620 TIME_WAIT tcp 0 0 localhost:37003 66.179.234.174:80 TIME_WAIT tcp 0 0 localhost:80 219.119.24.62:35234 ESTABLISHED tcp 371 0 localhost:80 66.97.163.5:1844 ESTABLISHED tcp 0 0 localhost:80 66.199.253.130:56244 TIME_WAIT tcp 0 475 localhost:80 125.77.78.144:1951 FIN_WAIT1 tcp 0 0 localhost:80 85.140.195.98:3520 TIME_WAIT tcp 0 0 localhost:80 124.64.83.6:4344 TIME_WAIT tcp 0 2181 localhost:80 72.197.228.60:52464 LAST_ACK tcp 0 0 localhost:80 83.167.112.34:19993 TIME_WAIT tcp 0 0 localhost:37202 217.12.8.238:80 TIME_WAIT tcp 0 0 localhost:36942 210.51.13.213:80 TIME_WAIT tcp 0 0 localhost:36749 66.179.234.173:80 TIME_WAIT tcp 289 0 localhost:80 60.26.116.241:1164 ESTABLISHED tcp 1 1 localhost:35875 66.179.234.174:80 CLOSING tcp 0 0 localhost:80 218.85.24.96:3521 ESTABLISHED tcp 0 11680 localhost:80 204.15.73.170:4348 ESTABLISHED tcp 0 0 localhost:80 61.149.29.62:4697 TIME_WAIT tcp 0 0 localhost:36820 66.179.234.174:80 TIME_WAIT tcp 0 0 localhost:36817 66.179.234.174:80 TIME_WAIT tcp 27841 0 localhost:37632 203.246.167.69:80 CLOSE_WAIT tcp 0 472 localhost:80 190.30.35.8:4058 LAST_ACK tcp 0 0 localhost:80 194.187.228.112:2496 CLOSE_WAIT tcp 0 0 localhost:80 72.232.110.10:2914 TIME_WAIT tcp 0 0 localhost:80 72.232.234.146:50817 TIME_WAIT tcp 32397 0 localhost:37535 70.87.126.194:80 ESTABLISHED tcp 1 11584 localhost:80 72.232.200.210:53219 CLOSE_WAIT tcp 0 0 localhost:80 77.70.106.4:39622 TIME_WAIT tcp 0 0 localhost:80 85.140.195.98:4036 ESTABLISHED tcp 0 0 localhost:80 124.135.20.40:4690 TIME_WAIT tcp 0 0 localhost:80 83.167.112.34:7197 CLOSE_WAIT tcp 0 951 localhost:80 72.232.200.210:64997 LAST_ACK tcp 1 0 localhost:80 209.67.215.82:32814 CLOSE_WAIT tcp 0 1 localhost:80 124.64.83.34:4057 FIN_WAIT1 tcp 0 3393 localhost:80 72.232.234.146:52103 CLOSING tcp 0 1 localhost:37521 67.83.25.167:80 SYN_SENT tcp 0 0 localhost:80 218.64.106.116:4022 TIME_WAIT tcp 0 6749 localhost:80 58.187.121.173:10360 FIN_WAIT1 tcp 0 0 localhost:37482 211.34.104.88:80 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:4281 TIME_WAIT tcp 0 9048 localhost:80 72.232.200.210:64486 LAST_ACK tcp 0 0 localhost:80 67.18.216.106:2891 TIME_WAIT tcp 0 0 localhost:80 66.199.253.130:54188 TIME_WAIT tcp 0 0 localhost:80 72.232.138.195:57013 TIME_WAIT tcp 0 0 localhost:37481 64.233.161.166:80 TIME_WAIT tcp 0 0 localhost:37232 64.233.161.165:80 TIME_WAIT tcp 0 0 localhost:80 204.13.169.6:2889 TIME_WAIT tcp 0 0 localhost:80 59.56.108.3:63420 ESTABLISHED tcp 0 0 localhost:36795 63.215.202.17:80 TIME_WAIT tcp 558 0 localhost:80 61.181.230.171:4588 ESTABLISHED tcp 0 0 localhost:36976 211.34.104.89:80 TIME_WAIT tcp 0 0 localhost:37676 66.199.244.34:80 TIME_WAIT tcp 0 0 localhost:37300 64.233.161.164:80 TIME_WAIT tcp 0 1 localhost:37019 67.83.25.167:80 SYN_SENT tcp 0 0 localhost:80 125.45.81.248:4753 ESTABLISHED tcp 0 1 localhost:37725 192.168.186.1:82 SYN_SENT tcp 0 0 localhost:36544 64.147.183.40:80 TIME_WAIT tcp 0 0 localhost:80 222.141.201.109:64460 TIME_WAIT tcp 1 0 localhost:80 66.199.253.130:53410 CLOSE_WAIT tcp 0 1 localhost:36877 64.12.161.164:443 SYN_SENT tcp 0 0 localhost:80 77.70.106.4:48845 TIME_WAIT tcp 0 0 localhost:80 87.255.1.6:2844 ESTABLISHED tcp 0 0 localhost:80 66.199.253.130:57251 FIN_WAIT2 tcp 0 0 localhost:80 87.255.8.21:63238 TIME_WAIT tcp 0 0 localhost:80 222.187.157.30:2012 ESTABLISHED tcp 0 0 localhost:37433 64.33.110.174:80 TIME_WAIT tcp 0 439 localhost:60509 209.151.238.229:80 FIN_WAIT1 tcp 393 0 localhost:80 61.149.29.62:1105 ESTABLISHED tcp 0 1 localhost:80 60.26.114.18:1693 FIN_WAIT1 tcp 0 0 localhost:80 89.31.89.51:4242 FIN_WAIT2 tcp 0 0 localhost:80 64.180.155.73:3713 FIN_WAIT2 tcp 0 0 localhost:80 85.140.195.98:3786 TIME_WAIT tcp 0 87 localhost:80 85.140.195.98:3018 LAST_ACK tcp 0 0 localhost:80 75.37.103.134:55005 ESTABLISHED tcp 0 0 localhost:80 124.135.20.40:2397 TIME_WAIT tcp 0 0 localhost:36430 218.61.32.29:80 TIME_WAIT tcp 0 0 localhost:80 58.187.121.173:10358 TIME_WAIT tcp 284 0 localhost:80 66.199.236.26:1232 ESTABLISHED tcp 0 0 localhost:36830 208.67.70.3:80 TIME_WAIT tcp 0 0 localhost:80 124.64.83.93:4783 TIME_WAIT tcp 0 0 localhost:80 218.85.24.96:1484 ESTABLISHED tcp 0 0 localhost:80 61.149.29.62:4694 TIME_WAIT tcp 0 0 localhost:80 124.64.83.34:3281 TIME_WAIT tcp 0 0 localhost:37360 67.139.134.232:80 TIME_WAIT tcp 0 0 localhost:80 58.65.236.137:57912 TIME_WAIT tcp 0 9728 localhost:80 59.56.108.3:2996 FIN_WAIT1 tcp 0 0 localhost:80 58.211.42.245:1040 ESTABLISHED tcp 0 0 localhost:37201 66.117.50.92:80 ESTABLISHED tcp 0 0 localhost:80 67.18.216.106:4930 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:63152 TIME_WAIT tcp 0 0 localhost:37656 69.93.17.170:80 TIME_WAIT tcp 0 76 localhost:80 70.254.57.190:56411 ESTABLISHED tcp 0 1 localhost:35787 59.106.117.222:80 LAST_ACK tcp 0 0 localhost:80 72.232.234.146:60338 TIME_WAIT tcp 0 0 localhost:80 125.37.251.229:3865 TIME_WAIT tcp 0 0 localhost:37221 217.31.49.10:80 TIME_WAIT tcp 0 0 localhost:80 58.65.236.121:59657 TIME_WAIT tcp 0 0 localhost:37184 212.227.212.237:80 TIME_WAIT tcp 0 0 localhost:37702 64.233.169.103:80 ESTABLISHED tcp 0 518 localhost:80 72.232.185.146:63200 LAST_ACK tcp 0 1 localhost:80 123.52.138.204:4177 FIN_WAIT1 tcp 0 0 localhost:80 204.9.190.22:3453 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:62606 TIME_WAIT tcp 0 0 localhost:36762 213.191.133.2:80 TIME_WAIT tcp 0 0 localhost:36880 64.233.169.103:80 TIME_WAIT tcp 0 0 localhost:37046 64.233.169.103:80 TIME_WAIT tcp 0 1 localhost:37399 204.213.246.6:80 SYN_SENT tcp 0 0 localhost:80 222.130.182.3:1768 ESTABLISHED tcp 0 1 localhost:34461 216.109.127.34:80 LAST_ACK tcp 0 0 localhost:80 124.135.20.40:3685 TIME_WAIT tcp 0 0 localhost:80 216.144.238.240:39855 FIN_WAIT2 tcp 0 0 localhost:37659 64.27.21.212:80 TIME_WAIT tcp 0 0 localhost:80 124.64.83.34:3560 TIME_WAIT tcp 0 0 localhost:80 85.91.116.180:3517 FIN_WAIT2 tcp 0 0 localhost:37492 218.223.224.28:80 TIME_WAIT tcp 0 0 localhost:80 61.181.230.171:1246 TIME_WAIT tcp 0 0 localhost:80 24.97.103.162:55427 ESTABLISHED tcp 1448 0 localhost:80 72.232.234.146:60599 ESTABLISHED tcp 0 0 localhost:80 72.36.250.34:1572 TIME_WAIT tcp 0 2087 localhost:35193 202.28.93.120:80 FIN_WAIT1 tcp 0 0 localhost:80 218.21.37.94:4790 TIME_WAIT tcp 0 0 localhost:80 222.233.52.159:3174 TIME_WAIT tcp 1 10137 localhost:80 72.232.200.210:53206 LAST_ACK tcp 0 10596 localhost:80 211.94.204.41:34144 FIN_WAIT1 tcp 0 0 localhost:80 85.176.140.190:3494 TIME_WAIT tcp 0 0 localhost:80 222.130.176.242:3301 TIME_WAIT tcp 0 0 localhost:80 217.27.218.122:52577 TIME_WAIT tcp 0 0 localhost:36893 66.250.223.7:80 TIME_WAIT tcp 0 0 localhost:37194 64.233.169.99:80 TIME_WAIT tcp 0 0 localhost:80 195.182.156.68:16820 TIME_WAIT tcp 0 0 localhost:37596 75.126.110.192:80 TIME_WAIT tcp 0 0 localhost:80 77.70.106.4:4861 TIME_WAIT tcp 0 0 localhost:80 219.119.24.62:35460 TIME_WAIT tcp 0 2093 localhost:80 58.65.236.137:59663 FIN_WAIT1 tcp 0 0 localhost:80 72.232.110.18:2880 TIME_WAIT tcp 0 0 localhost:80 218.21.37.94:2746 ESTABLISHED tcp 0 0 localhost:80 124.135.20.40:2412 ESTABLISHED tcp 0 2404 localhost:80 72.232.234.146:63416 CLOSING tcp 0 0 localhost:49012 64.12.161.185:443 ESTABLISHED tcp 0 0 localhost:80 59.56.109.116:3319 ESTABLISHED tcp 0 3968 localhost:80 59.56.127.21:4484 FIN_WAIT1 tcp 0 667 localhost:80 123.118.112.109:1981 FIN_WAIT1 tcp 0 1 localhost:80 75.177.24.203:61003 FIN_WAIT1 tcp 0 1 localhost:80 72.232.110.90:3850 FIN_WAIT1 tcp 0 0 localhost:37183 205.209.186.68:80 TIME_WAIT tcp 0 0 localhost:37499 64.233.169.147:80 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:62084 ESTABLISHED tcp 0 0 localhost:80 59.56.108.3:62593 TIME_WAIT tcp 0 0 localhost:37294 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37293 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37290 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37289 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37288 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37287 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37282 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37281 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37280 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37279 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37278 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37277 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37276 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37346 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37345 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37343 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 74.52.180.114:2339 TIME_WAIT tcp 0 0 localhost:37182 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36919 143.205.180.80:80 TIME_WAIT tcp 0 0 localhost:80 218.21.37.94:2239 ESTABLISHED tcp 0 1 localhost:80 59.56.108.3:62086 FIN_WAIT1 tcp 0 0 localhost:37188 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 218.18.214.101:61553 TIME_WAIT tcp 0 0 localhost:36996 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36997 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36995 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 124.64.83.6:1733 TIME_WAIT tcp 0 0 localhost:37111 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37092 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 85.140.195.98:4093 ESTABLISHED tcp 0 0 localhost:37071 205.209.186.67:80 TIME_WAIT tcp 0 0 localhost:37066 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37064 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37062 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37063 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36926 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36927 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 125.37.251.229:2324 ESTABLISHED tcp 0 0 localhost:36866 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37177 72.32.69.179:80 TIME_WAIT tcp 0 0 localhost:36950 208.71.120.23:80 TIME_WAIT tcp 1 1 localhost:36273 209.85.66.221:80 CLOSING tcp 0 0 localhost:36938 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36936 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36937 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36934 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36935 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36930 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36928 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36929 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 59.56.108.3:2692 TIME_WAIT tcp 0 0 localhost:37248 208.109.14.73:80 TIME_WAIT tcp 0 10331 localhost:80 124.64.83.34:2018 FIN_WAIT1 tcp 0 0 localhost:80 125.82.50.61:4238 TIME_WAIT tcp 0 0 localhost:80 85.140.195.98:3838 TIME_WAIT tcp 0 0 localhost:36815 202.210.169.79:80 TIME_WAIT tcp 0 1 localhost:37673 208.71.120.23:80 SYN_SENT tcp 0 1 localhost:37674 208.71.120.23:80 SYN_SENT tcp 0 0 localhost:37653 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37652 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37651 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37650 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37645 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37644 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37646 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37012 203.150.225.163:80 TIME_WAIT tcp 0 3503 localhost:80 218.64.106.116:3981 FIN_WAIT1 tcp 0 0 localhost:80 204.15.73.171:3520 TIME_WAIT tcp 0 0 localhost:37538 205.209.186.67:80 TIME_WAIT tcp 0 0 localhost:36692 209.85.66.221:80 TIME_WAIT tcp 0 1 localhost:36710 209.85.66.221:80 SYN_SENT tcp 0 0 localhost:37528 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37529 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37530 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37527 208.71.120.23:80 TIME_WAIT tcp 0 1 localhost:37728 140.160.140.5:80 SYN_SENT tcp 0 0 localhost:37418 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36821 209.85.66.221:80 TIME_WAIT tcp 0 0 localhost:37412 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37413 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37409 208.71.120.23:80 TIME_WAIT tcp 0 411 localhost:36741 209.85.66.221:80 ESTABLISHED tcp 0 0 localhost:36823 141.223.129.148:80 TIME_WAIT tcp 0 1 localhost:37484 208.71.120.23:80 FIN_WAIT1 tcp 0 0 localhost:80 219.254.32.106:1638 TIME_WAIT tcp 0 1384 localhost:80 59.56.108.3:63109 FIN_WAIT1 tcp 0 0 localhost:80 59.56.108.3:61829 TIME_WAIT tcp 0 0 localhost:80 222.130.176.242:3058 ESTABLISHED tcp 0 0 localhost:80 216.195.32.208:4097 TIME_WAIT tcp 0 1 localhost:36974 209.85.66.221:80 SYN_SENT tcp 0 0 localhost:36248 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:80 75.37.103.134:55286 ESTABLISHED tcp 0 0 localhost:36983 70.85.98.2:80 TIME_WAIT tcp 0 0 localhost:80 75.37.103.134:53750 FIN_WAIT2 tcp 0 0 localhost:80 124.64.83.93:4483 ESTABLISHED tcp 0 0 localhost:37229 66.104.86.10:80 TIME_WAIT tcp 0 0 localhost:37052 74.50.8.240:80 TIME_WAIT tcp 0 0 localhost:80 72.232.127.202:3183 TIME_WAIT tcp 0 445 localhost:80 204.15.77.102:4073 LAST_ACK tcp 0 0 localhost:80 204.9.190.24:1122 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:62623 ESTABLISHED tcp 0 0 localhost:80 59.56.108.3:3739 ESTABLISHED tcp 0 0 localhost:37217 209.85.66.221:80 TIME_WAIT tcp 90 0 localhost:80 75.109.12.140:3294 ESTABLISHED tcp 0 76 localhost:80 195.182.156.68:17570 ESTABLISHED tcp 0 0 localhost:37142 74.50.8.240:80 TIME_WAIT tcp 0 0 localhost:37666 66.104.86.10:80 TIME_WAIT tcp 0 0 localhost:80 59.56.108.3:1688 TIME_WAIT tcp 0 0 localhost:36799 208.71.120.23:80 TIME_WAIT tcp 1 1 localhost:37401 209.85.66.221:80 CLOSING tcp 0 0 localhost:37533 74.50.8.240:80 TIME_WAIT tcp 0 0 localhost:36801 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36800 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36803 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36802 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36805 208.71.120.23:80 TIME_WAIT tcp 0 447 localhost:37434 209.85.66.221:80 ESTABLISHED tcp 0 0 localhost:36804 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36807 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36806 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36827 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:37561 74.50.8.240:80 TIME_WAIT tcp 0 0 localhost:80 85.140.195.98:3042 ESTABLISHED tcp 0 0 localhost:37218 72.232.196.229:80 TIME_WAIT tcp 0 0 localhost:36732 208.71.120.23:80 TIME_WAIT tcp 0 0 localhost:36818 64.233.169.104:80 TIME_WAIT tcp 0 3947 localhost:80 202.101.42.157:2019 FIN_WAIT1 tcp 0 0 localhost:37415 66.104.86.10:80 TIME_WAIT tcp 0 0 localhost:37417 66.104.86.10:80 TIME_WAIT tcp 0 0 localhost:36500 208.71.120.23:80 TIME_WAIT tcp 0 1 localhost:37576 194.85.96.254:80 SYN_SENT tcp 0 0 localhost:80 38.100.200.227:3710 TIME_WAIT tcp 0 0 localhost:80 221.139.1.161:1821 TIME_WAIT tcp 1 0 localhost:80 72.232.110.98:3629 CLOSE_WAIT tcp 0 1 localhost:37075 206.251.169.99:80 SYN_SENT tcp 0 0 localhost:80 85.140.195.98:4068 ESTABLISHED tcp 279 0 localhost:80 123.8.4.247:8909 ESTABLISHED tcp 0 0 localhost:37161 128.194.147.159:80 TIME_WAIT tcp 0 0 localhost:80 72.232.110.90:1556 TIME_WAIT tcp 0 0 localhost:80 64.180.155.73:2734 FIN_WAIT2 tcp 0 2334 localhost:80 59.56.127.21:62874 FIN_WAIT1 tcp 0 0 localhost:80 60.26.119.157:2503 ESTABLISHED tcp 0 1 localhost:80 59.56.108.3:62367 FIN_WAIT1 tcp 0 86 localhost:80 209.53.177.132:4916 ESTABLISHED tcp 0 0 localhost:80 59.56.108.3:1692 TIME_WAIT tcp 0 0 localhost:80 204.15.73.166:4052 TIME_WAIT tcp 1 11584 localhost:80 72.232.185.146:61943 CLOSE_WAIT tcp 247 0 localhost:80 79.64.174.70:3683 ESTABLISHED tcp 0 0 localhost:37035 71.125.24.169:80 TIME_WAIT tcp 0 1 localhost:34616 217.237.190.136:80 LAST_ACK tcp 0 0 localhost:35878 210.228.173.153:80 TIME_WAIT tcp 0 0 localhost:37094 66.244.254.57:80 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:63385 TIME_WAIT tcp 0 0 localhost:80 219.254.32.106:3711 ESTABLISHED tcp 0 0 localhost:80 218.23.50.13:2531 TIME_WAIT tcp 0 0 localhost:80 38.100.200.239:2935 TIME_WAIT tcp 0 0 localhost:80 222.183.124.182:3400 TIME_WAIT tcp 0 0 localhost:80 222.233.52.151:3967 TIME_WAIT tcp 0 0 localhost:80 222.130.176.202:2509 TIME_WAIT tcp 0 0 localhost:80 59.56.127.21:4504 TIME_WAIT tcp 0 0 localhost:80 59.56.109.116:4075 TIME_WAIT tcp 0 0 localhost:80 61.149.29.62:1916 TIME_WAIT tcp 0 0 localhost:80 58.65.236.137:60446 ESTABLISHED tcp 320 0 localhost:80 222.130.176.202:3266 ESTABLISHED tcp 0 0 localhost:80 222.233.52.156:1403 TIME_WAIT tcp 0 0 localhost:80 125.90.204.37:2422 TIME_WAIT tcp 0 0 localhost:80 85.140.195.98:3560 TIME_WAIT tcp 0 0 localhost:37639 64.4.92.103:80 TIME_WAIT tcp 0 0 localhost:80 72.232.200.210:64201 TIME_WAIT tcp 0 1455 localhost:80 72.232.185.146:62712 CLOSING tcp 0 0 localhost:37425 59.106.117.222:80 TIME_WAIT tcp 0 0 localhost:80 77.70.106.4:50924 ESTABLISHED tcp 0 0 localhost:80 123.4.112.176:3327 ESTABLISHED tcp 0 0 localhost:80 84.125.71.119:45705 TIME_WAIT tcp 0 0 localhost:37477 59.106.117.222:80 TIME_WAIT tcp 0 0 localhost:36819 64.233.169.99:80 TIME_WAIT tcp 0 449 localhost:80 222.233.52.151:3186 FIN_WAIT1 tcp 0 0 localhost:80 59.56.109.116:1766 TIME_WAIT tcp 0 0 localhost:80 121.34.73.131:3280 ESTABLISHED tcp 377 0 localhost:80 59.56.109.116:4327 ESTABLISHED tcp 465 0 localhost:80 204.15.73.174:1233 ESTABLISHED tcp 0 0 localhost:80 217.205.201.122:42424 TIME_WAIT tcp 0 0 localhost:37359 64.4.92.103:80 TIME_WAIT tcp 0 1 localhost:80 218.85.24.96:1259 CLOSING tcp 0 0 localhost:80 59.56.127.21:2963 TIME_WAIT tcp 0 0 localhost:80 66.199.253.130:55942 TIME_WAIT tcp 469 0 localhost:80 124.64.83.6:2004 ESTABLISHED tcp 1 0 localhost:80 72.232.196.226:64240 CLOSE_WAIT tcp 0 0 localhost:80 85.140.195.98:4076 ESTABLISHED tcp 0 0 localhost:80 72.232.110.50:4213 TIME_WAIT tcp 0 0 localhost:37224 213.171.193.82:80 TIME_WAIT tcp 0 0 localhost:80 204.13.169.8:4205 TIME_WAIT tcp 399 0 localhost:80 59.56.127.21:2706 ESTABLISHED ... -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Sr. Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, purge the message from your system and notify the sender immediately. Any other use of the email by you is prohibited.

1 0

Centos 5 or 5.0
by Centos 06 Sep '07

06 Sep '07

Hello I am downloading Centos, but I don't know What is the difference between Centos 5 and Centos 5.0 also as far as I remember any rpm or file ending with 64 designed for AMD 64 bit, can I install CentOS-5.0-x86_64-bin-DVD.iso on Intel 64 bit as well ? Thanks

4 3

help centos web server ldap vhosts
by Sunet Sysadmin 06 Sep '07

06 Sep '07

Hi all, We have a debain system which is running ldap, apache with vhosts from ldap, ldap dns, mysql. so what i am trying to do is migrate the web server to a new machines planning to run centos 4 runing services 1) web server 2) mysql i have done some research on web a found in order to run apache with vhosts from ldap the module needed is mod_vhosts_ldap(correct me if wrong or aby thing else needed) but having a look at this post http://www.centos.org/modules/newbb/viewtopic.php?topic_id=9601&forum=33 and haven't found any successfull implementation of vhosts_ldap. Can any one please point me in the right direction if i can implement Centos with apache and vhosts from ldap running on a different server. any help is much appreciated cheers phani.

1 0

(no subject)
by Christopher Swingler 05 Sep '07

05 Sep '07

unsubscribe ____________________ Christopher Swingler System Administrator Cappex.com - Where colleges apply to you! cswingler(a)cappex.com<mailto:email@cappex.com> 847-748-9014 x7301 (p) (847) 433-7059 (f)

2 2

vsftp and "nopriv_user=ftpsecure" question
by Blackburn, Marvin 05 Sep '07

05 Sep '07

I am a bit confused as to how this works. I created a local unpriveleged user (with /bin/nologin shell). i uncommented the line containing nopriv_user=ftpsecure and restarted vsftp. I am confused as to what is supposed to happen. Shuld the daemon /usr/sbin/vsftpd be run as root or should it be ftpsecure? Or is the account only used to login to transfer files? Any help would be appreciated. _____________________________________ "He's no failure. He's not dead yet." William Lloyd George

1 0

dvb modules not in CentOS plus kernel for target=i686
by Tony 05 Sep '07

05 Sep '07

I'm just trying to setup my hauppauge nova-T freeview card under Centos 5. It works on the same hardware under CentOS 4.x using the CentOS plus kernel. Having installed the latest CentOS Plus kernel for CentOS 5.0 (2.6.18-8.1.8.el5.centos.plus) I've found that various kernel modules are missing- specifically dvb_core cx88_dvb and cx22702 that were used by my system under CentOS 4.x I've downloaded the srpm and had a bit of a hack. I note with interest that the source file kernel-2.6.18-i686.config has the line "# CONFIG_DVB is not set" whereas in kernel-2.6.18-ia64.config it is switched on: with CONFIG_DVB=y and there is also CONFIG_VIDEO_CX88_DVB=m amongst various other references to DVB in there. Does anyone know the background to this- do the DVB modules fail to build under i686 and are therefore deliberately turned off? I guess I may have a hack at the config file and then leave my machine to do some serious rpm building. -- Cheers, Tony

2 1

Promise VTrak and CentOS 5
by Bart Schaefer 05 Sep '07

05 Sep '07

We're having a problem with Linux and/or the SCSI controller failing to access an external RAID device. Components are: SuperMicro 6025B-TR+V CentOS 5.0 with yum update as of a week or two ago (kernel 2.6.18-8.1.8.el5) Promise Vtrak M310p Adaptec 29320 LPE -- aic79xx module Sometimes this fails on the initial device probing (before the kernel even begins to boot); sometimes the device is recognized ok and then we get a failure later on in the boot sequence (and then the device disappears). RedHat Linux is in the compatibility list for that Adaptec card, and the card is listed as compatible with the Promise VTrak. We were able to get this combination to work by giving up on the Ultra320 setting and dropping back to 160 in the controller setup, but if anyone has suggestions or info it would be appreciated. Here's the dmesg output: sd 2:0:0:0: Attempting to queue an ABORT message:CDB: 0x1a 0x0 0x5c 0x0 0x40 0x0 scsi2: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi2: Dumping Card State at program address 0x4 Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0xffc0 qinstart = 85 qinfifonext = 85 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 1 3 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi2: FIFO0 Free, LONGJMP == 0x825a, SCB 0x2 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi2: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x 0 0x0 scsi2: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi2: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 scsi2: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi2: REG0 == 0x2, SINDEX = 0x102, DINDEX = 0x102 scsi2: SCBPTR == 0xff02, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 2 1 0 0 0 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> sd 2:0:0:0: Unable to deliver message scsi2: Command abort returning 0x2003 sd 2:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x1a 0x0 0x5c 0x0 0x 40 0x0 scsi2: Device reset code sleeping scsi2: Device reset timer expired (active 2) scsi2: Device reset returning 0x2003 Recovery SCB completes sd 2:0:0:0: scsi: Device offlined - not ready after error recovery

2 1

Chrooting SFTP over SSH2
by Nigel Kendrick 05 Sep '07

05 Sep '07

Hi, As per the subject line - if I look up setting up chroot jails for SFTP over SSH2 I'm led to various Web sites and patches and also to a CentOS wiki page dated 2005, but what's the 'best' or 'correct' way to set this up for Centos 4.5 and 5? Thanks

4 3

xfs 0.4-1 kernel modules CentOS 4/5
by David Thompson 05 Sep '07

05 Sep '07

Is anyone else having difficulty with the kmod-xfs-*0.4-1* rpms from the centosplus repositories? For several years I have used a patched anaconda to get xfs file systems into the initial install for non-root file systems. With the 0.4-1 rpms, The subsequent reboot immediately reports file system xfs errors, and the system is unusable. I'm finding this with both CentOS 4 and CentOS 5. A rebuild of the old kernel-module-xfs* rpms (the version 0.2-1 rpms) for CentOS 4 for the new kernel (55.0.2.EL) works fine. I've tried both the standard kernel (with rebuilt 0.4-1 rpms), and the centosplus kernels for CentOS 4. I haven't yet tried to rebuild the 0.2-1 xfs modules with CentOS 5. Anyone else have experience with the new xfs modules? Thanks much. Dave Thompson UW-Madison

1 0

CPAN Question
by Al Sparks 05 Sep '07

05 Sep '07

Maybe a little off-topic. But using cpan, I tried to install IO::Compress::Base 2.006. I already had 2.005 installed. For the life of me, I couldn't get it to upgrade. It finally occurred to me to download the ".tgz" file, and install it that way. That worked. But does anyone have any hints on how to force cpan to upgrade? I even tried the "upgrade" command, and that didn't work. === Al

3 3

CentOS-announce Digest, Vol 31, Issue 3
by centos-announce-request＠centos.org 05 Sep '07

05 Sep '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0873 Moderate CentOS 3 i386 star - security update (Tru Huynh) 2. CESA-2007:0873 Moderate CentOS 3 x86_64 star - security update (Tru Huynh) 3. CESA-2007:0878 Moderate CentOS 3 i386 cyrus-sasl - security update (Tru Huynh) 4. CESA-2007:0878 Moderate CentOS 3 x86_64 cyrus-sasl - security update (Tru Huynh) 5. CESA-2007:0878 Moderate CentOS 3 ia64 cyrus-sasl - security update (Pasi Pirhonen) 6. CESA-2007:0873 Moderate CentOS 3 ia64 star - security update (Pasi Pirhonen) 7. CESA-2007:0795 Moderate CentOS 4 ia64 cyrus-sasl - security update (Pasi Pirhonen) 8. CESA-2007:0873 Moderate CentOS 4 ia64 star - security update (Pasi Pirhonen) 9. CESA-2007:0539 Moderate CentOS 5 i386 aide Update (Karanbir Singh) 10. CESA-2007:0539 Moderate CentOS 5 x86_64 aide Update (Karanbir Singh) 11. CESA-2007:0873 Moderate CentOS 3 s390(x) star - security update (Pasi Pirhonen) 12. CESA-2007:0878 Moderate CentOS 3 ia64 cyrus-sasl - security update (Pasi Pirhonen) 13. CESA-2007:0873 Moderate CentOS 5 x86_64 star Update (Karanbir Singh) 14. CESA-2007:0873 Moderate CentOS 5 i386 star Update (Karanbir Singh) 15. CESA-2007:0858 Important CentOS 5 i386 krb5 Update (Karanbir Singh) 16. CESA-2007:0858 Important CentOS 5 x86_64 krb5 Update (Karanbir Singh) 17. CESA-2007:0795 Moderate CentOS 4 s390(x) cyrus-sasl - security update (Pasi Pirhonen) 18. CESA-2007:0873 Moderate CentOS 4 s390(x) star - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Tue, 4 Sep 2007 23:30:08 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0873 Moderate CentOS 3 i386 star - security update To: centos-announce(a)centos.org Message-ID: <20070904213008.GA27588(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0873 star security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0873.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/star-1.5a08-5.i386.rpm source: updates/SRPMS/star-1.5a08-5.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update star Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

SysVinit guidance, please
by Robert 05 Sep '07

05 Sep '07

I have experienced a couple of power failures since installing CentOS 5, both while I was working on the system. The first time, several weeks ago, I thought there was some "feature" that I had never seen before but couldn't really put my finger on it. The power came back on after a few seconds and I never missed a beat. I also shrewdly forgot about the anomaly that I had almost noticed. I had a real power failure 2 days ago and tried to be more observant. What had gotten my attention earlier is that the once-familiar banner displayed on about everything except my room's ceiling was missing. After some red herrings and blind alleys (hey, you don't have to worry about mixed metaphors when you're an illiterate old coot!) I decided that the missing banners and the fact that the power was killed while a graphical page was displayed was what I saw. Anyhow, it seems that these extinct banners were a function of the /bin/shutdown routine in SysVinit because banners happen in CentOS 4.x whether the shutdown command is issued by fingers or by a UPS monitoring daemon. And I have since found that they're gone from CentOS 5, no matter how shutdown is invoked. After all of this, my question boils down to one of replacing the current SysVinit package, SysVinit-2.86-14.i386.rpm with the one from CentOS 4.x, SysVinit-2.85-34.3.i386.rpm Would that be courting disaster?

2 1

Hard-set network via ifup scripts...
by Ray Van Dolson 05 Sep '07

05 Sep '07

Anyone know off the top of their head the "right" way to hard set a link automatically to 100Mbps Full Duplex, etc using the ifup or ifcfg files? Don't see options in the scripts that might cover this, but maybe there's a more elegant way to do it than to do something in rc.local or hack up the ifup files myself... Ray

3 2

shrink LV with ext3 filesystem
by Thomas Antony 04 Sep '07

04 Sep '07

Hi. I want to make a snapshot from a logical volume and noticed that there must be enough free disk space in the volume group. Actually there is no free disk space left. How do i shrink online /var without losing any data or restore from backup? I do not have physical access to the server. Specs: Dell PE SC1430 with a 5/i RAID Controller one RAID 1 array from the Dell RAID controller 2 partitons (boot and LVM) 1 VG 3 LV (swap, /var (/dev/VolGroup00/LogVol02) and / formatted with ext3) /dev/mapper/VolGroup00-LogVol02 211G 39G 162G 20% /var Thank you in advance. Thomas Antony

4 10

CPAN error
by Mark Quitoriano 04 Sep '07

04 Sep '07

Hi all im not sure if this is the right mailing list but im using centos anyway. i run CPAN by perl -MCPAN -e shell and got through the first time configuration and after selecting the mirror sites i got this error and i can't get any modules to be installed. I haven't encountered this before and not very familiar with cpan. Constant subroutine __USE_POSIX undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 8, <STDIN> line 33. Constant subroutine __USE_POSIX2 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 9, <STDIN> line 33. Constant subroutine __USE_POSIX199309 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 10, <STDIN> line 33. Constant subroutine __USE_POSIX199506 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 11, <STDIN> line 33. Constant subroutine __USE_XOPEN undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 12, <STDIN> line 33. Constant subroutine __USE_XOPEN_EXTENDED undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 13, <STDIN> line 33. Constant subroutine __USE_UNIX98 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 14, <STDIN> line 33. Constant subroutine __USE_LARGEFILE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 16, <STDIN> line 33. Constant subroutine __USE_LARGEFILE64 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 17, <STDIN> line 33. Constant subroutine __USE_FILE_OFFSET64 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 18, <STDIN> line 33. Constant subroutine __USE_BSD undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 19, <STDIN> line 33. Constant subroutine __USE_SVID undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 20, <STDIN> line 33. Constant subroutine __USE_MISC undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 21, <STDIN> line 33. Constant subroutine __USE_GNU undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 22, <STDIN> line 33. Constant subroutine __USE_REENTRANT undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 23, <STDIN> line 33. Constant subroutine _POSIX_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 48, <STDIN> line 33. Constant subroutine _POSIX_C_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 50, <STDIN> line 33. Constant subroutine _XOPEN_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 52, <STDIN> line 33. Constant subroutine _XOPEN_SOURCE_EXTENDED undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 54, <STDIN> line 33. Constant subroutine _LARGEFILE64_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 56, <STDIN> line 33. Constant subroutine _LARGEFILE_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 98, <STDIN> line 33. Constant subroutine __USE_ISOC99 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 102, <STDIN> line 33. Constant subroutine __GNU_LIBRARY__ undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 147, <STDIN> line 33. cpan shell -- CPAN exploration and modules installation (v1.7602) ReadLine support enabled Can't ioctl TIOCGETP: Invalid argument Consider installing Term::ReadKey from CPAN site nearby at http://www.perl.com/CPAN Or use perl -MCPAN -e shell to reach CPAN. Falling back to 'stty'. If you do not want to see this warning, set PERL_READLINE_NOWARN in your environment.

3 3

recompiling httpd
by Matthias Leopold 04 Sep '07

04 Sep '07

hi, i'm trying to recompile the httpd rpm on a x86_64 system. all i've changed in the spec file is the "--with-suexec-docroot" configure option. the error message i get from the "rpmbuild -ba SPECS/httpd.spec" command is "ln: creating symbolic link `/var/tmp/httpd-root/etc/httpd/logs' to `../../usr/var/log/httpd': No such file or directory". so what do i do now? thx matthias -- Mit freundlichen Grüssen Matthias Leopold System & Network Administration Streams Telecommunications GmbH Universitaetsstrasse 10/7, 1090 Vienna, Austria tel: +43 1 40159113 fax: +43 1 40159300 ------------------------------------------------

3 7

NIS/Samba update
by Scott Ehrlich 04 Sep '07

04 Sep '07

My test setup consists of Enterprise 5 server running NIS and Samba, and dual-boot XP and CentOS 5 clients. On my test setup, I'm able to create new samba accounts and change samba passwords with no problems. NIS still gives me problems, though. I am unable to change passwords no matter what. Also, ypwhich on the client returns localhost. I have reviewed everything, including configs of other networks that are live, and cannot figure out where the problem is. I believe that once I can password changed effortlessly on the NIS side, I can implement this on the live system. Until NIS account passwords can be changed at-will, this setup won't go to production. So, what might I be missing? Why can't I change passwords? Also, what would cause the client, when issued ypcat passwd, to not show the newer accounts create by the server, even after a /var/yp make has been issued? Both client and server have been rebooted many times. Thanks. Scott

1 0

Performance Issues
by Dan Dansereau 04 Sep '07

04 Sep '07

My apology for cross posting We have a DELL6850 with 8Gbytes of memory, four 3.2Ghz CPU's , perc 4 raid controller, with fourteen 300Gbyte 10Krpm disk on a powervault 220s, And a powervault 124T LTO-3 tape systems on a separate 160Mbyte/sec adaptec SCSI card. The disks are configured as two 2Tbyte raid 0 partitions using the perc 4 hardware. The problem is - reading from the disk, and writing to the tape is pathetically slow. The specs say I should get around 80Mbyte/second - in reality - is about 500 Kbytes/second Writing just to tape, using /dev/zero as input and dd to write, I can get up to 60Mybte/second, indicating that the tape drive and scsi card is functional from a hardware perspective. Since I can read and write data to the disks - I assume that they are functional. The files are 80Mybtes for the minimum size that I am writing to tape. DELL Support hides behind the fact that CENTOS is not a supported OS, But RED HAT is - so switch to it, so DELL can get RED HAT Support involved. And the fact that Rocks is a modification to an unsupported OS.... I have tried using various block size in tar from 256 to 8192 - with minimal success. Does anybody have any experience on setting the OS/Kernel parameters to utilize the hardware at something more then a snails pace? Or Suggestions on what I could test and/or try? Or Is there a standard disk / tape IO test package that could test the speed/performance of the disks and /or tapes? Thanks for your help Dan A. Dansereau

5 5

Re: [CentOS] RAID + LVM Addition to CentOS 5 Install
by Nick Webb 04 Sep '07

04 Sep '07

On 9/4/07, Nick Webb <webbn(a)acm.org> wrote: > On 9/4/07, Shad L. Lords <slords(a)lordsfam.net> wrote: > > > This worked fine, but on reboot I get a ton of errors from LVM saying > > > that volume with id xxxx-xxxx-xxxx... was not found and the system > > > automatically reboots. This seems to happen for all volumes, not just > > > the ones I changed. This error even happens for a separate volume > > > group (called 'extended') that is on a separate set of disks and was > > > existing prior to the CentOS 5 install. > > > > > > Any idea on some step I missed? I know things are still fine on the > > > disks, as when I boot with the CentOS DVD with the 'linux rescue' > > > option all RAID & LVM volumes are available for use. So from this it > > > seems I need to update some CentOS config file? > > > > Did you re-create the initrd after adding the new raid group? Not 100% > > about this but my guess would be that the initrd isn't starting md2 and thus > > can't find the pv on that raid device. > > > > -Shad > Hi Shad, That solved it! Thanks so much for the help. Awesome group on here, BTW, 4 responses within a hour or two of my post, and a solution! Nick

1 0

RAID + LVM Addition to CentOS 5 Install
by Nick Webb 04 Sep '07

04 Sep '07

Hi All, I have what I believe to be a pretty basic LVM & RAID setup on my CentOS 5 machine: Raid Partitions: /dev/sda1,sdb1 /dev/sda2,sdb2 /dev/sda3,sdb3 During the install I created a RAID 1 volume md0 out of sda1,sdb1 for the boot partition and then added sda2,sdb2 to a separate RAID 1 volume as well (md1). I then setup md1 as a LVM physical volume for volume group 'system'. I left the sda3,sdb3 partitions available for future use. Next I created swap, /, /usr, /var, etc. logical volumes in the system volume group and continued with this install as normal. Everything went fine. I was able to use the system, reboot, etc., without problems. I then discovered that I needed more space in my /var volume than was available in the system volume group. So, I created another RAID device, /dev/md2 (using sda3,sdb3), and created an LVM physical volume on top of that. Finally, I extended the system physical volume to contain this new physical volume and expanded the size of the /var volume. This worked fine, but on reboot I get a ton of errors from LVM saying that volume with id xxxx-xxxx-xxxx... was not found and the system automatically reboots. This seems to happen for all volumes, not just the ones I changed. This error even happens for a separate volume group (called 'extended') that is on a separate set of disks and was existing prior to the CentOS 5 install. Any idea on some step I missed? I know things are still fine on the disks, as when I boot with the CentOS DVD with the 'linux rescue' option all RAID & LVM volumes are available for use. So from this it seems I need to update some CentOS config file? Here are some config files: http://pastebin.com/m6d5075dc Thanks! Nick

4 5

Using HTTP proxy for yum
by Scott Moseman 04 Sep '07

04 Sep '07

Is there a way to use an HTTP proxy (with a user/pass) with yum? Or at least a way to pass a user/pass through yum? I have a situation with a CentOS server behind a web filter appliance. Thanks, Scott

4 9

Re: [CentOS] Re: OT: Suggestions for RAID HW for 2 SATA drives in
by Lanny Marcus 04 Sep '07

04 Sep '07

On 31 August 2007, Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> wrote: > > Message: 21 > <snip> > > As discussed recently on-list, VMware CPU requirements to support > > virtualization are not nearly so rigorous as for Xen. You are > > probably OK with VMware on most any relatively modern x86 or x86_64 > > CPU. > > http://lists.centos.org/pipermail/centos/2007-August/085796.htmlg. http://www.vmware.com/products/server/?urlcode=yahoo_ssp Phil: That's very cool! The largest free space I have on my HD is about 5.3 GB. Can I create a new partition there and try VMware Server? TIA, Lanny

2 1

grep
by Scott McClanahan 03 Sep '07

03 Sep '07

Not a CentOS specific question, although I am running grep on CentOS 4.3 but how would you grep out a series of lines in a file starting at a specific point. For instance, if I have a file named foo and I want to grep out the next 5 lines after the first and only instance of the string "bar" how could I pull that off? Thanks so much.

13 24

ftape on centos5?
by Dave 03 Sep '07

03 Sep '07

Hello, Does anyone have the ftape driver working with a centos5 machine, specifically with a 2.6.18-8.18-8.el5 centosplus kernel? I've got a situation where it is needed and haven't been able to find anything related to kernels beyound 2.1 on it, not sure if that's still current, if not i'd appreciate any suggestions. Thanks. Dave.

2 1

how to tst my backup mail server
by Mail Administrator 03 Sep '07

03 Sep '07

Dear ALl, Sorry for my posting here but do apprecite if u guys help me.. I have already CenOS 5 and been used as my Primary DNS and primary sendmail mail server and is working perfectly fine i also have another Centos MAchine being used as my secondary DNS server and been workin fine.. i want to use this machine as my backup mail server and has gone to the DOCS have configured DNS and sendmail for a backup mail server. but i really dont know how i would test if my secondary mail server is workin apprecite if you cd have some examples or steps to check my newly setup backup mail server Thanks and Regards simon -- Network ADMIN: -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

Re: [CentOS] OT: Suggestions for RAID HW for 2 SATA drives in DellPowerEdge SC
by Lanny Marcus 03 Sep '07

03 Sep '07

On 31 August 2007 , Feizhou <feizhou(a)graffiti.net> wrote: > Message: 11 <snip> > > Besides I do not believe the PERC 5IR has BBU cache, that > > controller is really only meant as a simple RAID1 controller for > > the OS. I'll try to find out. > Dell certainly has a BBU cache option, not sure if OP's Poweredge box > has that option. It's a very low end box. Starting with the lowest price server they have, with upgrades. I'll try to find the specs for it!

1 0

Linux User Auditing
by Mag Gam 03 Sep '07

03 Sep '07

Is it possible to audit the Linux User Shell? I am trying to gather what commands a user is running no our systems. Can auditd handle this? TIA

3 3

Re: [CentOS] Mail Restrictions with sendmail and mimedefang
by Indunil Jayasooriya 03 Sep '07

03 Sep '07

On 9/3/07, Feizhou <feizhou(a)graffiti.net> wrote: > > > Now, I can find some files @ /etc/mail > > > > below are files. > > > > mimedefang-filter > > sa-mimedefang.cf <http://sa-mimedefang.cf> > > sa-mimedefang.cf.example > > > > I first want to block Bcc and limit Cc to about 5 users. I googled a > > lot. But, I am still not be able to achieve this task. > > > > will I have to edit /etc/mail/mimedefang-filter to block Bcc and to > > limit Cc . > > > > Have you done it? > > > > Sorry, i run postfix + clamav-milter + spamass-milter. > > Please ask Les, the sendmail and mimedefang guru. All I can say is that > from what I understand of Les' comments, you can modify the perl code of > mimedefang to do what you want. > Hi feizhou, Thanx for your quick response. I think Les , the sendmail and mimedefang guru, should join this. I just send this to the list. Do you know his email address? pls give it to me. Then , We can DISCUSS this on the list. THIS would be benifitial to other users too. Hope hear from you. -- Thank you Indunil Jayasooriya

3 3

network driver corruption? Interface disappeared
by Dave 03 Sep '07

03 Sep '07

Hello, I've got a very unusual network interface issue on centos5. I'm setting up a router box, with two network interface cards, the first gets it's information from a dhcp server, the second is statically configured. I have no idea what happened, but yesterday the internal interface eth1 stopped showing up. An ifconfig eth1 showed the interface not found, but an ifconfig -a shows a strange __tmp interface. Below is some output: #cat /proc/modules iptable_filter 7105 0 - Live 0xc890c000 ip_tables 17029 1 iptable_filter, Live 0xc88e6000 x_tables 17349 1 ip_tables, Live 0xc884b000 dm_mirror 29713 0 - Live 0xc892c000 dm_mod 56665 1 dm_mirror, Live 0xc893e000 parport_pc 29157 1 - Live 0xc8923000 lp 15849 0 - Live 0xc8842000 parport 37513 2 parport_pc,lp, Live 0xc8901000 floppy 57125 0 - Live 0xc8914000 ide_cd 40033 0 - Live 0xc88f6000 cdrom 36705 1 ide_cd, Live 0xc88ec000 serio_raw 10693 0 - Live 0xc8847000 pcspkr 7105 0 - Live 0xc8811000 8139cp 26305 0 - Live 0xc88d8000 8139too 28737 0 - Live 0xc88cf000 mii 9409 2 8139cp,8139too, Live 0xc883e000 tulip 50785 0 - Live 0xc88c1000 i2c_viapro 12117 0 - Live 0xc8816000 i2c_core 23745 1 i2c_viapro, Live 0xc8829000 ext3 123081 2 - Live 0xc8860000 jbd 56553 1 ext3, Live 0xc8851000 ehci_hcd 32845 0 - Live 0xc8834000 ohci_hcd 23261 0 - Live 0xc8822000 uhci_hcd 25421 0 - Live 0xc881a000 #cat /etc/modprobe.conf alias eth0 8139too alias eth1 tulip alias net-pf-10 off #ifconfig eth1 eth1: error fetching interface information: Device not found #ifconfig -a __tmp2065753655 Link encap:Ethernet HWaddr 00:A0:CC:64:E6:3E BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:12 Base address:0x4f00 #cat /etc/sysconfig/network-scripts-ifcfg-eth1 # Internal Ethernet Device (STATIC) DEVICE=eth1 TYPE=Ethernet IPADDR=192.168.1.1 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=static IPV6INIT=no HWaddr=00:A0:CC:64:E6:3E If i reboot the box that tmp long number changes, that made me think that the eth1 file was in the middle of an editing session when a crash occurred, i however can not find a tmp file for a crashed editor session. I've tried removing the nic and putting it in another box, and it worked. I am open to suggestions. Thanks. Dave.

1 0

centos-5 and ocfs2
by Joachim Backes 03 Sep '07

03 Sep '07

Hi, is it possible to install ocfs2 in centos-5 without build a new kernel? Regards Joachim Backes <joachim.backes(a)rhrk.uni-kl.de> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone: +49-631-205-2438, FAX: +49-631-205-3056 http://hlrwm.rhrk.uni-kl.de/home/staff/backes.html

2 2

CentOS-announce Digest, Vol 31, Issue 2
by centos-announce-request＠centos.org 03 Sep '07

03 Sep '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Virtualization SIG created (Daniel de Kok) ---------------------------------------------------------------------- Message: 1 Date: Sun, 02 Sep 2007 14:21:49 +0200 From: Daniel de Kok <daniel(a)centos.org> Subject: [CentOS-announce] Virtualization SIG created To: centos-announce(a)centos.org Message-ID: <1188735709.3670.2.camel(a)mindbender.taickim.com> Content-Type: text/plain The CentOS team is pleased to announce the creation of its first Special Interest Group (SIG): the Virtualization SIG. A SIG is a smaller group within the CentOS project that focuses on a small set of issues, in order to either create awareness or to focus development along a specific topic. The Virtualization SIG has the following goals: - Discussing, documenting and implementing methods to optimize virtualization performance. - Improvement and maintenance of virtualization support in CentOS. - Assisting in building ready-to-run images for common virtualization technologies, and development of installable CentOS media for virtualization platforms. - Work closely with providers of virtualization products, to see how we can accomodate use of their products with CentOS. - Maintenance of virtualization-related documentation in the CentOS Wiki. - Maintenance of the centos-virt mailing list. This list is used for discussing virtualization of and on CentOS, as well as discussion of SIG-related matters. Information about the Virtualization SIG can be found at: http://wiki.centos.org/SpecialInterestGroup/Virtualization General information about CentOS SIGs is available at: http://wiki.centos.org/SpecialInterestGroup/Virtualization You are invited to join the CentOS virtualization mailinglist at: http://lists.centos.org/mailman/listinfo/centos-virt With kind regards, The CentOS team ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 31, Issue 2 **********************************************

1 0

OT: 4 dual cores agains 2 quad cores
by Erick Perez 03 Sep '07

03 Sep '07

Hi people, Do you have pointers to web documents that help me make comparisons between buying a server with two quad core 2.33 ghz or buying a 4 dual core 2ghz server? I am trying to answer a question of performance. It is not important the redundancy/failover or the price of the server. Just the performance. obviously all the hardware specs are the same, the question is the CPU. -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

6 6

Mail Restrictions with sendmail
by Indunil Jayasooriya 03 Sep '07

03 Sep '07

Hi all, I am running sendmail with MailScanner on CentOS. I want to enable some restrictions. Restrictions are given below. All clients Currently can send Bcc from their workstations as usual. I want to disable (block Bcc) that feature. Can I do it from the Sendmail Server ? All clients currently can send Cc form their workstations as usual. I want to limit it. Let's say about 5 Cc s . All incoming mails are forwarded to another email address by using an alias . pls see below for , /etc/aliases john: john,mailbackup(a)example.com userx: userx,mailbackup(a)example.com The above for incoming mail. Can I make a copy of ALL OUTGOING mail to one email address? let's say mailoutgoing(a)example.com And also enabling quota. What is the best way to add quota? last feature is adding a Global Address Book. Let me explain about it. Let's say In MS exchange server, Whenever users are added, Those names will be available In a Global Address book. Then, No need to add email addresses to client's email programmes such as outlook express or MS outlook. Can I enable such a feature ? your comments are welcome. -- Thank you Indunil Jayasooriya

2 10

IBM X3200
by CentOS List 02 Sep '07

02 Sep '07

Hi ppl . I am getting a IBM x3200.. This machine can only support up to 4 x 250GB SATA. I need to have a usable space of 500GB and mirror it to other 500GB. IBM proposed me to get 2 RAID cards. Do you guys think i can do raid 0 on the first 2 x 250GB HDD and raid 0 on the second 2 x 250GB hdd, both on hardware raid and then during the installation of centos 5, i raid 1 on both the 2 sets of hardware raids? Thanks

6 19

apache mod_jk?
by John Hinton 02 Sep '07

02 Sep '07

Is this really not in CentOS 5? or maybe buried in javaland somewhere? thanks, John Hinton

2 1

Re: [CentOS-announce] Virtualization SIG created
by Phil Schaffner 02 Sep '07

02 Sep '07

On Sun, 2007-09-02 at 14:21 +0200, Daniel de Kok wrote: > The CentOS team is pleased to announce the creation of its first Special > Interest Group (SIG): the Virtualization SIG. A SIG is a smaller group > within the CentOS project that focuses on a small set of issues, in > order to either create awareness or to focus development along a > specific topic. > > The Virtualization SIG has the following goals: > > - Discussing, documenting and implementing methods to optimize > virtualization performance. > - Improvement and maintenance of virtualization support in CentOS. > - Assisting in building ready-to-run images for common virtualization > technologies, and development of installable CentOS media for > virtualization platforms. > - Work closely with providers of virtualization products, to see how we > can accomodate use of their products with CentOS. > - Maintenance of virtualization-related documentation in the CentOS > Wiki. > - Maintenance of the centos-virt mailing list. This list is used for > discussing virtualization of and on CentOS, as well as discussion of > SIG-related matters. > > Information about the Virtualization SIG can be found at: > http://wiki.centos.org/SpecialInterestGroup/Virtualization Hmmm - all I see there is "You are not allowed to view this page." Not very friendly. :-( > General information about CentOS SIGs is available at: > http://wiki.centos.org/SpecialInterestGroup/Virtualization Presumably should have been: http://wiki.centos.org/SpecialInterestGroup > You are invited to join the CentOS virtualization mailinglist at: > http://lists.centos.org/mailman/listinfo/centos-virt > > With kind regards, > The CentOS team Phil

1 0

CentOS 5 (64) Gnome - not detecting Optical Mouse
by Siva GNU/Linux 02 Sep '07

02 Sep '07

Hi I am using CentOS 5 64bit, i can install successfully on the below hardware. while booting i can see the Pointer and use Mouse. But While i get a Login screen I couldn't see the pointer, after login also i can't. when i press CTRL button, it shows where the pointer is.. What should i do to enable and work with Mouse. AMD Athlon 64 X2 3800+ ASUS Nvidia Geforce Chipset board 1GB DDR 2 80 GB SATA 17" TFT Logitech Optical Mouse -- cheers, SivaPrakash.SK +91-98840-57147.

3 2

Subject: Re:[CentOS] SELinux question - to fix bug in Webmin
by Lanny Marcus 01 Sep '07

01 Sep '07

On 30 August 2007, Kenneth Porter <shiva(a)sewingwitch.com> wrote: <snip> > (I'm curious to know what the solution is, though, so please follow up > back here with anything you find!) Below is the latest message from Jamie Cameron: > Ok, it sounds like this will be more complex that I thought if they > need to add a custom policy just for Webmin. It runs quite a few > commands that could log errors to /var/webmin/miniserv.error .. > > Regarding the other file descriptors, based on your testing and mine > with the lsof command, it looks like this issue is fixed in the latest > Webmin release, as there doesn't appear to be any handles open to > /var/webmin/sessiondb.* anymore.

1 0

Re: [CentOS] Re: OT: Suggestions for RAID HW for 2 SATA drives in
by Lanny Marcus 01 Sep '07

01 Sep '07

On 31 August 2007, Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> wrote: > Message: 21 <snip> > As discussed recently on-list, VMware CPU requirements to support > virtualization are not nearly so rigorous as for Xen. You are > probably OK with VMware on most any relatively modern x86 or x86_64 > CPU. > http://lists.centos.org/pipermail/centos/2007-August/085796.html Phil: Thanks. I remember reading that post. I will do some reading. Lanny

1 0

cannot find mcrypt rpm
by Melinda Odom 01 Sep '07

01 Sep '07

Hi, I need this to install for a new ecommerce store I want to test out: mcrypt for extension=php_mcrypt.dll in php.ini Do you know where I can get this rpm? I cannot find it on the CentOS repository. I am using php 5.2.3-4 and mysql 4.1.20 on CentOS 4.3. Thank you! Sincerely, Melinda Odom Design Hosting, Inc. www.designhosting.biz 479-471-0891 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.13.1/982 - Release Date: 8/31/2007 5:21 PM

2 1

Re: SELinux question - to fix bug in Webmin
by Lanny Marcus 01 Sep '07

01 Sep '07

On 30 August 2007, Kenneth Porter <shiva(a)sewingwitch.com> wrote: > Message: 75 <snip> > You might also want to direct your question to the SELinux people on > their lists: > > <http://www.redhat.com/mailman/listinfo/fedora-selinux-list> > <http://www.nsa.gov/selinux/info/list.cfm> > > (I'm curious to know what the solution is, though, so please follow up > back here with anything you find!) Ken: I posted on the fedora-selinux-list Below is the reply from Daniel J. Walsh at Redhat. Lanny > This explanation and description of the problem are fine. We probably > need a custom policy for webmin to allow iptables to write to scripts > running as webmin, since catching stderr is important. There is no > file context that can be set to allow this. As I recall from the > original bug report, iptables was also trying to communicate with > another open file descriptor. This one I beleive should be closed on > exec.

1 0

Virtual Hosting
by mailadmin＠baladia.gov.kw 01 Sep '07

01 Sep '07

Dear All, Im sorry for posting this query here but was helpless.. as i am not able to subscribe to sendmail mailing list i have jus installed CentOS 5 and the following software sendmail 8.13 bind 9.3 this machine is used as a primary DNS and out mail server and is been workin perfect we jus have a new domain and i want to have virtual mail hosting on the smae machine for our new domain apprecite if you can help me with some steps or any links which can give me example of settin up virtual mail hosting with sendmail thnks and regards benedict -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 3

CentOS-announce Digest, Vol 31, Issue 1
by centos-announce-request＠centos.org 01 Sep '07

01 Sep '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0875 Important CentOS 4 x86_64 mysql - security update (Johnny Hughes) 2. CESA-2007:0875 Important CentOS 4 i386 mysql - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 31 Aug 2007 19:43:01 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:0875 Important CentOS 4 x86_64 mysql - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <46D8B595.8040801(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Security Advisory 2007:0875 https://rhn.redhat.com/errata/RHSA-2007-0875.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64 mysql-4.1.20-2.RHEL4.1.0.1.i386.rpm mysql-4.1.20-2.RHEL4.1.0.1.x86_64.rpm mysql-bench-4.1.20-2.RHEL4.1.0.1.x86_64.rpm mysql-devel-4.1.20-2.RHEL4.1.0.1.x86_64.rpm mysql-server-4.1.20-2.RHEL4.1.0.1.x86_64.rpm src: mysql-4.1.20-2.RHEL4.1.0.1.src.rpm

1 0

RE: [CentOS] OT: Suggestions for RAID HW for 2 SATA drives in DellPowerEdge SC
by Lanny Marcus 01 Sep '07

01 Sep '07

On 29 August 2007, "Ross S. W. Walker" <rwalker(a)medallion.com> wrote: > Message: 39 <snip> > I wouldn't worry too much about the OS HD configuration, you are > always going to want RAID1 for the OS, whether software or hardware. > > Reason I say not to worry too much about the OS HD config is because > you are almost certainly going to put the application or user data > on a separate array, so the OS HD is basically used for loading > binaries. Ross: Thank you! I also read your reply to Israel in Cuba, which may be applicable for me. About 10 seconds after I started this thread, I remembered a long discussion about RAID, SATA, etc., 2 or 3 months ago. I think that Feizhou (?) strongly recommended going with Software RAID in CentOS. I will search for that and do a lot of reading. RAID 1 for mirroring is what I want. Lanny

3 5

CentOS4 and older megaraid
by Craig White 01 Sep '07

01 Sep '07

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design, is compatible with the 2.6 kernel, and includes support for the latest hardware. However, megaraid_mbox does not support some of the older hardware that was supported by the megaraid driver. Adapters with the following PCI vendor ID and device ID pairs are not supported by the megaraid_mbox driver: vendor, device 0x101E, 0x9010 0x101E, 0x9060 0x8086, 0x1960 <--- my card ---< The lspci -n command can be used to display the IDs for adapters installed in a particular machine. Products with these IDs are known by (but not limited to) the following model names: * Dell PERC (dual-channel fast/wide SCSI) RAID controller * Dell PERC2/SC (single-channel Ultra SCSI) RAID controller * Dell PERC2/DC (dual-channel Ultra SCSI) RAID controller * Dell CERC (four-channel ATA/100) RAID controller * MegaRAID 428 * MegaRAID 466 * MegaRAID Express 500 * HP NetRAID 3Si and 1M Both Dell and LSI Logic have indicated that they no longer support these models in the 2.6 kernel. As a result, these adapters are not supported in Red Hat Enterprise Linux 4. Craig

10 40

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss