- Discuss - lists.centos.org

Livecd question
by don vogt 22 Jun '07

22 Jun '07

I feel a litle foolish, having to bother the list with a dumb question. I used the livecd for a while a few months ago and was able to save my configuration changes between sessions. I was away doing other things for a while and now I can't remember the commands to store and retrieve the changes, nor have I been able to find the instructions on how to do that after several days looking. Apreciate any help.

1 0

xterm
by Web and Co sprl - Patrick DERWAEL 22 Jun '07

22 Jun '07

Hi list Im in the process of switching from a RedHat EL 4 to CentOS 5, and run into some problems Im trying to open a X session to my Centos box, and got an error message stating that /usr/X11R6/bin/xterm is not found. Surprisingly, /usr/X11R6/bin is almost empty, as compared to my RedHat box., and I am 100% sure I have selected X during the installation Linking /bin/xterm to /usr/X11/bin/xterm allows me to start a session Question: is this the right thing to do on CentOS, or is this just a workaround? Cheers Patrick Derwael WEB And Co sprl Rue Hubert Larock, 20 B - 4280 Poucet Tél. : 019/63.64.35 Fax : 019/65.75.02 Mob : 0479/80.50.79 TVA. BE 0.877.467.641 <http://www.webandco.be/> http://www.webandco.be <http://www.webandco.be/default/conditions-generales.pdf> Nos Conditions générales ----------------------------------------- <http://www.webandco.be/reseau/audit-securite-informatique.asp> ICT & Security management <http://www.webandco.be/developpement/creation-site-web-internet.asp> Création, <http://www.webandco.be/developpement/maintenance-site-web-internet.asp> gestion et <http://www.webandco.be/referencement/accueil.asp> référencement de sites Web <http://www.webandco.be/hebergement/accueil.asp> Hébergement et <http://www.webandco.be/domaine/accueil.asp> noms de domaine

3 2

Unable to access mirrors
by Ron Dyck 22 Jun '07

22 Jun '07

Just did a fresh install of CentOS 5 x86_64 on a vmware virtual box. Have done this successfully in the past but now run into problems with yum and perl CPAN. The error I get: http://centos.arcticnetwork.ca/5.0/os/x86_64/repodata/primary.xml.gz: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. continues until it runs out of mirrors. I'm able to access everything, ie: ping google.com lynx google.com is fine. I've tried halting iptables (I'm behind router) all to no avail. Any help would be appreciated. ron -- ================= Ron Dyck pulpfree1(a)gmail.com www.webbtech.net =================

2 2

Problem Installing On ASUS P5VD2-VM Motherboard
by Iain Gardiner 22 Jun '07

22 Jun '07

Hi All I was wondering if anyone has installed CentOS 4.x on the following configuration? Our specs for the server are ASUS P5VD2-VM Motherboard, Intel Core2Duo processor, 2 x 250GB Seagate SATA HDD with 2GB RAM. I am currently trying to install SME Server 7.1 on this configuration. The SME forum has recommended I post here as well to see if anybody can help. The message I am getting is: Running anaconda, the SME Server system Installer - Please Wait.... Traceback (most recent call list): -- File "/usr/bin/anaconda", line 1130, in ? instClass.setInstallData(id) -- File "/tmp/product/installclasses/smeinstallclass.py", line 297, in setInstallData -- self.setDefaultPartitioning( id.partitions, doClear=0) -- File "/tmp/product/installclasses/smeinstallclass.py", line 262, in setDefaultPartitioning -- dispatch.skipStep("partition", skip=0) NameError: global name 'dispatch' is not defined install exited abnormally sending termination signals ... Done sending kill signals ... Done disabling swap ... Done unmounting file system /mnt/runtime disabling /deve/loop0 /proc/bus/usb /proc /dev/pts /sys /tmp/ramfs /mnt/source system ready for reboot ...... I have tried the SME 7.2 testing version, running SATA HDD's as SATA1, switching off all RAID options, updating BIOS and now I'm out of ideas, if anyone can help in any way this would be much appreciated. Thanks Iain

1 0

PHP 4.3.10 on CentOS 4 or CentOS 5
by Devraj Mukherjee 21 Jun '07

21 Jun '07

Hi Everyone, I am in a fix with an installation for a client where I need PHP version 4.3.10 or above (4.3.x, but not PHP 5). The application we are trying to run will not run on PHP 5. CentOS 4.5 provides PHP 4.3.9, is there a quick an easy way to have PHP 4.3.10 available on either CentOS 4.5 or CentOS 5 Any pointers will be greatly appreciated. -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

4 3

ERROR: Unable to create temporary directory on centos 5
by Indunil Jayasooriya 21 Jun '07

21 Jun '07

Hi all, i just installed MailScanner-4.60.8-1.rpm.tar.gz on centos 5 with sendmail 8.13.8. Whenever I send emails, I get bellow error. Jun 21 15:33:01 mail MailScanner[3657]: New Batch: Scanning 1 messages, 767 bytes Jun 21 15:33:02 mail MailScanner[3657]: Virus and Content Scanning: Starting Jun 21 15:33:02 mail MailScanner[3657]: ERROR: Unable to create temporary directory Jun 21 15:33:02 mail MailScanner[3657]: Uninfected: Delivered 1 messages Jun 21 15:33:03 mail sendmail[3694]: l5LA2wY5003682: to=<test(a)mail.csbsl.com>, ctladdr=<root(a)mail.csbsl.com> (0/0), delay=00:00:05, xdelay=00:00:00, mailer=local, pri=120305, dsn=2.0.0, stat=Sent WHY IS THAT? Then, I disabled Selinux as follows. setenfoce 0 Then, Checked again and no such error was given. Worked properly. I do not want to leave Selinux disable. So could you pls help me to solve thsi issue ? -- Thank you Indunil Jayasooriya

2 1

Simple shared authentication method
by Lorenzo 21 Jun '07

21 Jun '07

Hi all, I'm setting up an old server to became the core server of our local lug and I'm on trouble choosing an easy yet powerful method for authentication. I think it would be nice to have a single method for authenticating local accounts, email, joomla and so on, and to be able to add another server and use the same method in the future. I am looking now at openldap but I start thinking it's too complex for the task of single sign on... or at least I am missing an easy graphical tool to setup just users and passwords (ldapbrowser and directory_assistant aren't working, and I don't have too much time to spend on learning command-line tools). Does anyone have a suggestion for an easy Single Sign On server? Tia Lorenzo Quatrini p.s. Of course all the above under CentOS 5 ;)

1 0

building cobbler on centos
by Karl R Balsmeier 21 Jun '07

21 Jun '07

Is it difficult to build cobbler on Centos or should I just go with Fedora on this one? Basically, if you have experience succeeeding at this, can you drop me a link to a Howto or describe the issues? I am only writing this because I tried, and ran into quite a few dependency issues with upstream/downstream packages, and would rather concentrate on just getting a nice working Cobbler (and Puppet too for that matter). Not looking for responses for the sake or responses per se, -i'm happy to do what's needed, but not seeing any repos for it either so.... -krb

4 6

Program that opens documents with their associated program
by bgschaid_lists＠ice-sf.at 21 Jun '07

21 Jun '07

This may be a TOTALLY trivial question (and maybe inappropriate for this list), but I don't know where else to ask it: On my Mac I've got this wonderful command line utility that opens documents with the program that is associated to them in the Finder (the graphical file manager) like they were clicked in the file-manager. For instance: if I type open testdocument.doc it opens the file with Word or OpenOffice (whatever is associated with the document type .doc). This is quite convenient (don't have to leave the shell to open a document) My question: Is there a similar command on CentOS (or more specifially GNOME, because obviously it has to take the associations from some kind of GUI-filemanager)? I was looking around, but this is the kind of question where googling doesn't turn up anything useful unless you know the name of the command. Thanks

2 1

MusicMatch Jukebox-like mp3 player...
by David A. Woyciesjes 20 Jun '07

20 Jun '07

Looking for recommendations.... On WinXP, I use MusicMatch Jukebox version 9 for all my tinkering with mp3s. What do you guys use that would match the functionality of MMJB? I'm mainly interested in the music library setup of MMJB... -- --- David Woyciesjes

5 13

Please help: confusing dmesg messages
by Robinson Tiemuqinke 20 Jun '07

20 Jun '07

Hi, I got a few centos 5 boxes installed for tests and find the following confusing messages from dmesg command: Your BIOS doesn't leave a aperture memory hole Memory: 4043392k/5242880k available (2397k kernel code, 150460k reserved, 1222k data, 196k init) The machine has only 4GB memory chips installed only, so where comes the number 5242880k for memory? [root@centos5Cli01 ~]# cat /proc/meminfo | grep -i total MemTotal: 4045132 kB HighTotal: 0 kB LowTotal: 4045132 kB SwapTotal: 15999252 kB VmallocTotal: 34359738367 kB HugePages_Total: 0 [root@centos5Cli01 ~]# ____________________________________________________________________________________ Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7

1 0

Re: [CentOS] CentOS 5 LiveCD - When?
by Radu-Cristian FOTESCU 20 Jun '07

20 Jun '07

> > ftp://ftp.psi.ch/psi/livecd/pub/50/ > > In what way are you being rude? For recommending a distro on a ML of another distro. R-C Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com

1 0

iptables question
by ann kok 20 Jun '07

20 Jun '07

Hi all Can iptables have log and deny rule together? if no. how can I make a deny rule and log rule and the log rule can limit the log entry eg: 200 if yes, how can I make it I am using freebsd ipfw. eg: ipfw add 22 deny log all from any to x.x.x.x thank you ____________________________________________________________________________________ Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC

3 4

Re: [CentOS] CentOS 5 LiveCD - When?
by Radu-Cristian FOTESCU 20 Jun '07

20 Jun '07

> If no LiveCD is forthcoming soon, then I'll burn a copy > of the CentOS 4 LiveCD and let her try that. Sorry for being rude, but in the meantime, what's wrong with a copy of Scientific Linux 5 LiveCD?! ftp://ftp.psi.ch/psi/livecd/pub/50/ Except for the artwork, it should be closer to CentOS 5 than anything else. Ream more here: http://listserv.fnal.gov/scripts/wa.exe?A2=ind0705&L=scientific-linux-devel… and here: ftp://ftp.psi.ch/psi/livecd/pub/50/i386/livecd_SL50_gnome_2007-05-25_rpmlist.txt Cheers, R-C Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com

2 1

BQ/CentOs port forwarding
by Richard Veale 20 Jun '07

20 Jun '07

Just bought a new BQ/CentOS box with full NuOnce load (Linux 2.6.9-55.ELsmp, gcc 3.4.6, Red Hat 3.4.6-8, Apache 2.0.52, BQ 5102r), to replace my old Qube 3 pro, I have NAT setup (eth0 = inside, eth1 = outside) but need to get port forwarding going. What is the best way? Thanks in advance Richard

4 5

How To Free memory
by Fung 20 Jun '07

20 Jun '07

Hi All, My CentOS 5.0 is running on x86 machine with 4GB RAM. It runs as a webserver and there is a small java applet application. When the system is fresh reboot, there is below 1GB of used memory and as times go , the used memory increased to over 3.5GB. Is there a way to free memory out like those program which works under Windows? Thank you.

6 5

Re: [CentOS] Migration help please - moving OS to a different LVM partition
by Robert Moskowitz 20 Jun '07

20 Jun '07

Robert Story wrote: > On Tue, 19 Jun 2007 14:28:44 -0400 Robert wrote: > RM> I have set up a migration between two drives. fIrst I got Centos 5 > RM> working how I wanted on this drive, then set about copying it to another > RM> drive. > ... > RM> Still I cannot get the new drive to boot. > RM> > RM> If I boot with the latest kernel (which I copied to the new drive), I > RM> get a message finding the new LVM partition, could not find the old LVM > RM> partition then: > RM> ... > RM> Mount: could no find filesystem /dev/root > RM> ... > RM> fsck.ext3 Unable to resolve 'label=/boot' > > You need to rebuild you initrd image.. See the mkinitrd man page.. I kind of thought it would be something like that, but given that I could not boot up, I was not sure what to do. Last night I punted and did a clean, full, install on the new drive. Did the yum update, copied my data directory and I a now up with basic functions. I have also documented some of my starting setups, and am now ready to reboot and see if I got everything in for madwifi and sun's java jdk.... Lessons learned and all that stuff. One major thing is that an OS migration is NOT so cut and dry...

1 0

Problem with yum after upgrading from 4.5 to 5.0
by Thomas Dukes 20 Jun '07

20 Jun '07

Hello, Have pretty much figured out I can't use plugins since upgrading. If I use yum update --noplugins to get the updates for 5.0, I get: Warning: rpmts_HdrFromFdno: Header V# DSA signature: NOKEY, key ID e8562897 Public key for samba-common-3.0.23c-2.el5.2.0.2.i386.rpm is not installed I looked back through the archives and think I may need a rpmforge-release key but have not been able to find it. Is this right? Anyone have a link for it? TIA

3 3

web based vacation frontend
by Erick Perez 20 Jun '07

20 Jun '07

Hi, One customer has Centos 5 installed. He wants to have a web based frontend to the vacation program because he is in charge to enable the vacation msg for all the users in leave. I tried webmin but the webmin vacation module points to a nonexistant link. And the usermin module is very old and requires the user to do it by themselves. Suggestions? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

5 4

antivirus
by Wayne 20 Jun '07

20 Jun '07

Hey Guys, We have a central server which runs centos, most of the client machines run on windows. Does anybody know of a solution whereby we can manage antivirus for all the clients from the centos server? I know there are management consoles for managing antivirus on windows but we dont want to run a windows server.. Anybody have any ideas? Or are we just screwed and need to have a windows server for this? Thanks, Wayne

11 14

Disk errors on CentOS 5 - libata bug?
by Miguel Medalha 20 Jun '07

20 Jun '07

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Despite the error messages, the disks seem to be working with no problems. Could someone please tell me what these error are and if there is some known way to prevent them? I searched the Net for these errors and they seem to appear with a wide range of disks, controlers and chips set brands, even with different Linux distributions. The issue seems to be related to the last few kernel versions and is perhaps a bug or ill implemented "feature" of libata. My configuration: - 2 Hitachi SATA 120 GB Harddisks (first generation, no NCQ) - Intel P4 3GHz - Tyan Tomcat i875p motherboard, Intel ICH5 disk controler - 1 GB ECC RAM - 2 Intel Gb NICs - 1 Intel 10/100 NIC Error message follows: --------------------------------------------------------------------- ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back --------------------------------------------------------------------- Thank you Miguel

1 2

Correct xen domains path
by Jordi Espasa Clofent 20 Jun '07

20 Jun '07

Hi all, Two questions 1. According to http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU?highlight=%28xen%29 it would be /srv/xen or even /var/lib/xen/images. ¿What is the correct absolute path to put into the xen domains files? 2. Moreover, if you want the domU(s) boot together dom0, you should put the domains files (images) into /etc/xen/auto. ¿A simple symlink will be enough in this case? -- Thanks, Jordi Espasa Clofent

5 16

Migration help please - moving OS to a different LVM partition
by Robert Moskowitz 19 Jun '07

19 Jun '07

I have set up a migration between two drives. fIrst I got Centos 5 working how I wanted on this drive, then set about copying it to another drive. The Centos files on both drives are in sub-partitions in an LVM partition on their respective drives. I first did a minimum install on the new drive and saved all those files to a separate directory. The LVM partititons and sub-partitions all have unique names. Well it has been a bit of a struggle to say it nicely. Seems the LVM names are buried all over the place. Of course I had to change /boot/grub/grub.conf, /boot/grub/menu.lst, and /etc/fstab But more than that was the contents of /etc/lvm So for those I just restored what was created in the minimum install. Still I cannot get the new drive to boot. If I boot with the latest kernel (which I copied to the new drive), I get a message finding the new LVM partition, could not find the old LVM partition then: Mount: could no find filesystem /dev/root and a kernel panic. If I get the boot menu and select the kernel installed with the minimum install, it gets a little further. It still tries to find the old LVM partition, cannot find /lib/modules.dep in the /lib/modules directory for this kernel (forget the whole filename), and then: fsck.ext3 Unable to resolve 'label=/boot' and then get dropped into a maintenance mode with the file system mounted in readonly mode. So what Have I Missed? Or is this a lost cause and I should just do a full install on the new drive and proceed from there????

2 1

Wireless networking with CentOS 4.4 on Dell laptop
by Andrew Allen 19 Jun '07

19 Jun '07

I have a (new) Dell laptop with CentOS 4.4 installed and am trying to get wireless networking. The list of drivers doesn't include a specific one for this card - Dell wireless 1390 Mini PCI network card 802.11b/g (according to the manufacturer's blurb). Any ideas as to where I can find the appropriate driver please? Andy

1 0

Gnome Taskbar(s)
by fredex 19 Jun '07

19 Jun '07

Question: All the newer Gnome distributions seem to configure themselves with two small "taskbars" (panels, I guess) one at the top and one at the bottom. I prefer the older scheme with one larger one (usually) at the bottom. When I install Centos5 in the near future I'm going to want to be able to restore the old-style panels. Anybody know what I need to change to make it work in the old way? Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- I can do all things through Christ who strengthens me. ------------------------------ Philippians 4:13 -------------------------------

3 2

CUPS driver for Panasonic DP-2330 printer?
by James B. Byrne 19 Jun '07

19 Jun '07

Can anyone point me to a possible source of a linux cups driver specifically for this machine or to a work-alike driver for a similar piece of equipment. Failing this, does anyone have any suggestions as to any open source software guys who might be willing to develop one for a fee? Regards, P.S. I have already googled, yahooed and sniveled on other venues in search of an answer. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

process show uid not user
by Frank M. Ramaekers 19 Jun '07

19 Jun '07

One of my user's processes shows up with the uid (numeric) rather than the user (alpha) on the ps command. The /etc/passwd file shows: theuser:x:500:501:The user:/home/theuser:/bin/bash But, 'ps -ef' shows the uid: 500 9041 8864 0 11:20 pts/1 00:00:00 ps -ef Allother active users show the user. Ideas? Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 ---------------------------------------- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at PrivacyAct(a)ailife.com. ---------------------------------------- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at PrivacyAct(a)ailife.com.

2 3

Justin Morgan is out of the office.
by Justin Morgan 19 Jun '07

19 Jun '07

I will be out of the office starting 17/10/2006 and will not return until 30/10/2006. I will respond to your message when I return.

4 3

CentOS-announce Digest, Vol 28, Issue 16
by centos-announce-request＠centos.org 19 Jun '07

19 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0486-01: Moderate CentOS 2 i386 mod_perl security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Tue, 19 Jun 2007 09:45:32 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2007:0486-01: Moderate CentOS 2 i386 mod_perl security update To: centos-announce(a)centos.org Message-ID: <4677191C.9090702(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2007:0486-01 Moderate: mod_perl security update Files available: mod_perl-1.26-8.el2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 28, Issue 16 ***********************************************

1 0

Centos 5 Repo errors
by Robert Moskowitz 19 Jun '07

19 Jun '07

Where are: kbs-CentOS-Misc http://centos.karan.org/el5/misc/stable/i386/RPMS/repodata/repomd.xml: --> [Errno 14] HTTP Error 404: Not Found contrib Failure getting http://centosn.centos.org/centos/5/contrib/i386/repodata/repomd.xml: --> [Errno 14] HTTP Error 404: Not Found what is the correct source for c5-media instead of: [c5-media] name=CentOS-$releasever - Media baseurl=file:///media/CentOS/ file:///media/cdrom/ file:///media/cdrecorder/

3 4

how to change distro live?
by Farkas Levente 19 Jun '07

19 Jun '07

hi, we've got many mandrake 8,9 and 10 system remotely. we'd like to remotely replace these systems to centos 5. we've 4 disk in them. one is the system drive (no need for raid) and there is free space on the remaining 3 disk. so what we think about: - download the new system to the data disks - install grub (mandrake has lilo) to boot the old system and reboot - create the old system in the data disk - update grub to boot the old system from the data disk and reboot - repartition the system disk - transfer the new system to the system disk - update grub to boot form new system disk and reboot. this seems to easy but has many very dangerous steps and we has only remote ssh access to the system. if we loose the connections we can't access the system anymore and we've to travel a lot! another constrain that we should have to do this very fast ie. it'd be nice if the system wouldn't be down for a long time. - what would be the best method for this? - what are the dangerous step here? - what would be the best way and format to transfer the new system to the disk (we think about an iso file)? - does anybody do such thing and what is his experience? thank you for your help in advance. -- Levente "Si vis pacem para bellum!"

4 4

yumex 'crashed' - anyway to resume?
by Robert Moskowitz 19 Jun '07

19 Jun '07

I spent quite a bit of time setting up what I wanted to update and install via yumex. I left my system for a few minutes to attend to another computer. A helpful family member logged me off without checking. So can I recapture what I had queued? I cannot find anything that looks like a yumex queue file. yum.log does not have any updates from today.... :(

2 1

manual partitioning with centos 5
by Marco 19 Jun '07

19 Jun '07

hi, i'm used to manual partition and format disks before installing the O.S. but with centos 5 this results in an unbootable system. Usually, to manual partition the disks I use the installation disk in recovery mode.. The partition schema I choose was: /dev/sda1 /boot /dev/sda2 swap /dev/sda3 LVM PV inside the LVM VG I created the following LV / /var /home /tmp Then I formatted all the partitions with ext3 (doing some tuning on ext3 parameters) After I had partitioned and formatted the disk I booted from the installation CD and I installed centos 5 without any error. The installed system was not able to boot at all , the boot process ends with a kernel panic when trying to mount the root partition. On the same hardware Itryed to install centos 5 choosing the deafult auto partition option and the resulting system was ok. What's wrong ? What did i miss ? Thank you in advance Marco ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html

1 0

CentOS 5 and Xen Windows domU
by Fong Vang 19 Jun '07

19 Jun '07

Has anyone been able to get a Xen Windows domU to install or work properly on CentOS 5? I'm trying to do that now. It's able to boot and start he installation (from ISO), but after partitioning the disk and copying a few files to the hard drive, it cannot boot into the graphical installer. This is the config file I'm using: import os, re arch = os.uname()[4] if re.search('64', arch): arch_libdir = 'lib64' else: arch_libdir = 'lib' kernel = "/usr/lib/xen/boot/hvmloader" builder='hvm' memory = 1024 shadow_memory = 520 name = "acw2" vcpus=4 vif = [ 'type=ioemu, mac=00:18:32:6c:00:ba, bridge=xenbr0' ] disk = [ 'phy:/dev/acw1/acw2,ioemu:hda,w', 'file:/isos/en_ws_2003_std_sp1_vl.iso,ioemu:hdc:cdrom,r' ] cdrom='/dev/hdc' boot='dca' #boot='a' device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' sdl=0 vnclisten="10.1.34.108" vnc=1 vncdisplay=2 vncconsole=0 vncpasswd='' stdvga=1 serial='pty' on_reboot = 'preserve' on_crash = 'preserve'

2 1

Upgrade of dovecot broke imap (CentOS 4.5)
by Joe Klemmer 19 Jun '07

19 Jun '07

I just did a yum update and one of the packages updated was dovecot. I've been using this for imap/pop3 for quite a while. Now, however, I get an error when trying to login under any account. It gives "bad user or password" errors for every user. The user can ssh in just fine and run mutt or pine. But trying to get in with evolution, or even squirrelmail, just gives me an evil laugh and the finger. Anyone run into this? I was planning to upgrade the box to CentOS 5 next month but I may do it sooner if it will fix this. Thanks, Joe P.S. Please CC: me directly if you can as mail reading is, obviously, not cooperating with me. -- Boring Home Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other interesting junk

6 23

PXE problems with syslinux 3.51
by Gavin Carr 19 Jun '07

19 Jun '07

Anyone else seeing problems doing pxe boots off the latest dag/rpmforge syslinux packages? Versions 3.35 works, doing the tftp request like this: Jun 18 06:01:19 boothost in.tftpd[25947]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:01:19 boothost in.tftpd[25947]: tftp: client does not accept options Jun 18 06:01:19 boothost in.tftpd[25948]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:01:19 boothost in.tftpd[25950]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.cfg/03-03-13-83-83-d3-a3 Jun 18 06:01:19 boothost in.tftpd[25951]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.cfg/AC10001A Jun 18 06:01:19 boothost in.tftpd[25957]: RRQ from 172.16.0.26 filename /centos5-i386/vmlinuz Jun 18 06:01:19 boothost in.tftpd[25958]: RRQ from 172.16.0.26 filename /centos5-i386/initrd.img Versions 3.50 and 3.51 request the filenames without the leading /centos5-i386, and fail: Jun 18 06:05:13 boothost in.tftpd[25947]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:05:13 boothost in.tftpd[25947]: tftp: client does not accept options Jun 18 06:05:13 boothost in.tftpd[25948]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:05:13 boothost in.tftpd[25949]: RRQ from 172.16.0.26 filename pxelinux.cfg/44454c4c-3300-1033-8050-abcdef4e3153 Jun 18 06:05:13 boothost in.tftpd[25950]: RRQ from 172.16.0.26 filename pxelinux.cfg/03-03-13-83-83-d3-a3 Jun 18 06:05:13 boothost in.tftpd[25951]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC10001A Jun 18 06:05:13 boothost in.tftpd[25952]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC10001 Jun 18 06:05:13 boothost in.tftpd[25953]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC1000 Jun 18 06:05:13 boothost in.tftpd[25954]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC100 Jun 18 06:05:13 boothost in.tftpd[25955]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC10 Jun 18 06:05:13 boothost in.tftpd[25956]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC1 Jun 18 06:05:13 boothost in.tftpd[25957]: RRQ from 172.16.0.26 filename pxelinux.cfg/AC Jun 18 06:05:13 boothost in.tftpd[25958]: RRQ from 172.16.0.26 filename pxelinux.cfg/A Jun 18 06:05:13 boothost in.tftpd[25959]: RRQ from 172.16.0.26 filename pxelinux.cfg/default Any cluesticks on solving this? For now I've just reverted to 3.35, but it would be nice to get it working with the current release. Cheers, Gavin

1 0

Wireless mouse problem
by P Marvin Eberly 19 Jun '07

19 Jun '07

Hello all, Just for kicks I plugged in a Microsoft wireless optical desktop 1000 keyboard/mouse combo into my Centos 4.5 machine. It recognized it on boot and configured it and it mostly works good. The issue is with the mouse, when I hold it over a folder on my desktop for a second or so it grabs the folder and opens a small menu as if I was using my middle button on my Logitech. All this happens without me touching a button. It also opens links in firefox (seemingly at random) and brings background windows to the front as soon as the cursor touches them. I know it's probably my punishment for using something with that name on it, but I really didn't expect it to work as well as it does. Does anyone have any ideas of config files or any other things I could try to get this working better. It is a USB keyboard/mouse with a single receiver, and the machine is fully updated. Thanks, Marvin E. -- P Marvin Eberly <eberlyml(a)wjtl.net>

1 0

Do I really have the right ATrpms repo?
by Robert Moskowitz 18 Jun '07

18 Jun '07

I copied exactly where Axel provided into atrmps.repo. I have the line: atrpms.repo:baseurl=http://dl.atrpms.net/el5-x86_64/atrpms/stable but the rpms that are being flagged as updates pretty much all have fc5 in their names. e.g.: ---> Package mplayer-fonts.noarch 4:1.0-7.at set to be updated ---> Package mplayer.i386 4:1.0-60_r23482.fc5 set to be updated ---> Package zonecheck.noarch 0:2.0.4-3.fc5.at set to be updated ???

2 1

Copying my new Centos 5 to my main drive
by Robert Moskowitz 18 Jun '07

18 Jun '07

Well it is now time to take the final upgrade steps. I have spent a bit of time looking here in the archives and googling along on migration, cloning, and copying and don't think I found any approach that includes first setting partitions as you like.... I am working with a different partition setup for Centos 5 than 4 (I've learned a few things in the past year). So I plan is: Do minimum install of Centos 5 to my main drive, using my new partitioning scheme: A /boot ext3 partition. A swap partition. A LVM partition with: a / ext3 sub-partition. a /home ext3 sub-partition. while booted from this minimum install, use cp to copy the following directories from the test drive to something like /home/working: boot, bin, lib, misc, opt, sbin, sys, usr, etc, var, root, tmp In otherwords skip: lost+found, mnt, proc, selinux, home, media, net, tftpboot, srv The reason for including boot is to get the newer kernels. This opens the question of is there anything in places like proc and dev that I need to get becuase they were updated since the 5.0 ISO images? Once copied, boot from the test drive, mount the old drive, copy from /home/working to the 'real' directories. Switch drives again, and I should be operational....

1 0

Kickstart stopped working
by Alfred von Campe 18 Jun '07

18 Jun '07

I've been using kickstart for a while now, but today I tried to kickstart a system and it's just not working at all. I can't figure out why it's hanging. I booted from the CentOS 4.5 CD #1 and typed "linux ks=http:// centosmirror/ks/sys20.cfg". If I check my web server's log, I can see that sys20.cfg was accessed. This file begins with the following lines: install url --url http://centosmirror/ Looking at the text in alternate console 3 (or was it 4), I can see that it got an IP address via DHCP, got the config file mentioned above, set the hostname as specified in the config file, and then ends with the following messages: trying to mount CD device hdc mntloop loop0 on /mnt/runtime as /mnt/source/CentOS/base/ stage2.img fd is 21 transferring http://centosmirror//./CentOS/base/product.img to a fd transferring http://centosmirror//./disc1/CentOS/base/product.img to a fd A long time (5 minutes?) passed between the last two lines, and then the entire things repeats (with some additional output lines that I didn't bother to write down). First, I don't have a product.img file in my base directory. In a recent thread on this list about doing an ftp install, I remember reading that copying stage2.img to product.img helped, so I created a hard link between the two. Second, looking at the webserver logs, there is no mention of product.img or stage2.img. Finally, there is no alternate console #2, so I can't get a shell prompt to poke around a little more. I've done dozens of kickstarts in the past using this server, but I don't remember if I've successfully done a kickstart install since 4.5 came out. Are there some known issues with kickstart in 4.5? I rsync my local repo every night from one of the public mirrors. Alfred

1 0

Centos 5 - Setting up yum for ATrpms
by Robert Moskowitz 18 Jun '07

18 Jun '07

I think I found one of my setup problems. I followed instructions at: http://atrpms.net/install.html And now I see that the information shown there to put into yum.conf (that I put into yum.repo.d/atrpms.repo) is only for FC, not for RL5 (thus Centos 5). What do I use in my atrmps.repo to get it to access the RL5 directories?

3 4

Red Hat Linux gets top government security rating
by Rodrigo Barbosa 18 Jun '07

18 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 In case you have been living in an underground security cave lately. (For the lazy ones, this was RHEL 5). http://www.computerworld.com.au/index.php/id;306842912;fp;4194304;fpid;1;pf… http://www.niap-ccevs.org/cc%2Dscheme/st/?vid=10125 - -- Rodrigo Barbosa "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFGdtIrpdyWzQ5b5ckRAmLYAJ9SzclZ4wKxA7aWkzieN/rbbbRwMQCePxLS yX611BNW+QVfZfz+nm8H4KU= =wmS9 -----END PGP SIGNATURE-----

1 0

Justin Morgan is out of the office.
by Justin Morgan 18 Jun '07

18 Jun '07

I will be out of the office starting 18/06/2007 and will not return until 02/07/2007. I will respond to your message when I return. For urgent matters please contact Panbio Reception for assistance : +617 3363 7100.

3 2

GUI Login Screen for CentOS 5
by Mark Snyder 18 Jun '07

18 Jun '07

I installed CentOS using the option for a GUI Server with GRUB and GNOME. When it boots it stops at a text login screen, which is not desirable in our setup. I want it to start at the GUI login screen and not have to press 'Ctrl Alt F7' to bring this screen up. I thought this was controlled by /etc/inittab but it is setup correctly for runlevel 5. How can I correct this setup? Mark

2 2

Centos 5
by Craig Van Ham 18 Jun '07

18 Jun '07

Why isn't there a server ISO for Centos 5.0 Craig

10 10

Madwifi just seems to work in Centos 5
by Robert Moskowitz 18 Jun '07

18 Jun '07

I have not installed the madwifi specific kernel stuff (kdml and hal-kdml) from atrpms. I have installed with wpa rpms. And my Atheros card is working with almost no work on my part (other than runing wpa_supplicant as a deamon). Nice!

4 11

diagnosing strange crash/hang
by Gordon McLellan 18 Jun '07

18 Jun '07

This morning I get a call that a server is down. The server in question is a vmware guest, windows 2003 advanced. The host is vmware server 1.01, running on centos 4.4 x64 on a poweredge 2950. The server has 16g of ram and a quadcore cpu, storage is provided by a perc 5/i, raid 1 across two 146gb sas drives. I was able to ssh into the host. After trying to ping the guest, and trying to connect to vmware via the management console, I decided to restart the vmware service. so I type service vmware restart. it hung on "shutting down virtual machines". I was able to ctrl-c out, and decided to manually kill the vmware processes. after killing all the vmware stuff, I did a service vmware start. I get an error "cannot touch /etc/vmware/locations: read only file system" /etc is part of /, which mount claimed was mounted RW so I try cat /var/log/messages and get nothing so I tell the machine to reboot (remotely). of course, it doesn't come back up on its own, so I drive to the location. the machine is running, but sitting at a black screen. I don't know what state it was in, so did a forced turn off. turning it back on, it proceeded to boot normally. it had a slight pause while it ran fsck on / but other than that, no errors. the vm's restarted normally, /var/log/messages is back, but has no entries between June 15 and when I rebooted it the 2nd time on June 18. any ideas on where I should start looking? is there some way to read array status from a Perc controller under linux? any suggestions will be appreciated! thanks Gordon

1 0

mounting an lvm partition via a USB adapter
by Robert Moskowitz 18 Jun '07

18 Jun '07

I am trying to mount this (my old hard drive) from my Centos 5 install as a USB drive so I can copy files over. I have made the change to max_luns so that I can have more than one drive on a USB drive. The first partition, /dev/sda1 mounts automatically as /boot_ The second partition, /dev/sda2 is the one I really want and it is an lvm partition. When I am booted from this drive (as the installed IDE drive, not as a usb drive) has for its /etc/fstab: # This file is edited by fstab-sync - see 'man fstab-sync' for details /dev/VolGroup00/LogVol01 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 /dev/VolGroup00/LogVol02 /home ext3 defaults 1 2 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/VolGroup00/LogVol00 swap swap defaults 0 0 But I do not see any /dev/Vol... when I boot from my Centos 5 drive (oh, I have labeled the lvm partitions on that drive to start with Centos5 so that its labels are different from my Centos 4 drive lablels). What mount command do I use?

2 2

CentOSplus Postfix with mysql/pgsql
by Brent DiNicola 18 Jun '07

18 Jun '07

The lasted version of Postfix in the OS for 4.5 add a .1 to the rpm version which makes it newer than the CentOSPlus version and hence replaces it, any intent to update the 4.5 CentOSPlus package or should I roll my own with mysql included? 4.5 OS Version: postfix-2.2.10-1.1.el4.i386.rpm 4.4/5 CentOSPlus Version: postfix-2.2.10-1.RHEL4.2.mysql_pgsql.c4.i386.rpm Thanks Brent -- Brent DiNicola/Whitewolf The Whitewolf of Imrryr <centos .AT. elric.net> http://www.elric.net Disclaimer: Any opinions expressed here are from my dog. Any liabilities fall to the dog.

1 0

CentOS-announce Digest, Vol 28, Issue 15
by centos-announce-request＠centos.org 18 Jun '07

18 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0406 Important CentOS 4 i386 openoffice.org - security update (Johnny Hughes) 2. CESA-2007:0406 Important CentOS 4 x86_64 openoffice.org - security update (Johnny Hughes) 3. CESA-2007:0492 Moderate CentOS 4 i386 spamassassin - security update (Johnny Hughes) 4. CESA-2007:0492 Moderate CentOS 4 x86_64 spamassassin - security update (Johnny Hughes) 5. CESA-2007:0494 Important CentOS 4 i386 kdebase - security update (Johnny Hughes) 6. CESA-2007:0494 Important CentOS 4 x86_64 kdebase - security update (Johnny Hughes) 7. CESA-2007:0395 Low CentOS 4 i386 mod_perl - security update (Johnny Hughes) 8. CESA-2007:0395 Low CentOS 4 x86_64 mod_perl - security update (Johnny Hughes) 9. CESA-2007:0501 Moderate CentOS 4 i386 libexif - security update (Johnny Hughes) 10. CESA-2007:0501 Moderate CentOS 4 x86_64 libexif - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sun, 17 Jun 2007 09:44:06 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:0406 Important CentOS 4 i386 openoffice.org - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1182091446.5096.135.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0406 https://rhn.redhat.com/errata/RHSA-2007-0406.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: openoffice.org-1.1.5-10.6.0.1.EL4.i386.rpm openoffice.org2-base-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-base-2.0.4-5.7.0.i386.rpm openoffice.org2-calc-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-calc-2.0.4-5.7.0.i386.rpm openoffice.org2-core-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-core-2.0.4-5.7.0.i386.rpm openoffice.org2-draw-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-draw-2.0.4-5.7.0.i386.rpm openoffice.org2-emailmerge-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-emailmerge-2.0.4-5.7.0.i386.rpm openoffice.org2-graphicfilter-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-graphicfilter-2.0.4-5.7.0.i386.rpm openoffice.org2-impress-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-impress-2.0.4-5.7.0.i386.rpm openoffice.org2-javafilter-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-javafilter-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-af_ZA-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-af_ZA-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ar-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ar-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-bg_BG-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-bg_BG-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-bn-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-bn-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ca_ES-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ca_ES-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-cs_CZ-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-cs_CZ-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-cy_GB-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-cy_GB-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-da_DK-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-da_DK-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-de-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-de-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-el_GR-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-el_GR-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-es-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-es-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-et_EE-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-et_EE-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-eu_ES-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-eu_ES-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-fi_FI-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-fi_FI-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-fr-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-fr-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ga_IE-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ga_IE-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-gl_ES-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-gl_ES-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-gu_IN-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-gu_IN-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-he_IL-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-he_IL-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-hi_IN-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-hi_IN-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-hr_HR-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-hr_HR-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-hu_HU-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-hu_HU-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-it-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-it-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ja_JP-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ja_JP-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ko_KR-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ko_KR-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-lt_LT-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-lt_LT-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ms_MY-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ms_MY-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-nb_NO-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-nb_NO-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-nl-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-nl-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-nn_NO-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-nn_NO-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-pa_IN-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-pa_IN-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-pl_PL-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-pl_PL-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-pt_BR-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-pt_BR-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-pt_PT-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-pt_PT-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ru-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ru-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-sk_SK-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-sk_SK-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-sl_SI-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-sl_SI-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-sr_CS-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-sr_CS-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-sv-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-sv-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-ta_IN-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-ta_IN-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-th_TH-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-th_TH-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-tr_TR-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-tr_TR-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-zh_CN-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-zh_CN-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-zh_TW-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-zh_TW-2.0.4-5.7.0.i386.rpm openoffice.org2-langpack-zu_ZA-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-langpack-zu_ZA-2.0.4-5.7.0.i386.rpm openoffice.org2-math-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-math-2.0.4-5.7.0.i386.rpm openoffice.org2-pyuno-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-pyuno-2.0.4-5.7.0.i386.rpm openoffice.org2-testtools-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-testtools-2.0.4-5.7.0.i386.rpm openoffice.org2-writer-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-writer-2.0.4-5.7.0.i386.rpm openoffice.org2-xsltfilter-2.0.4-5.7.0.1.0.i386.rpm openoffice.org2-xsltfilter-2.0.4-5.7.0.i386.rpm openoffice.org-i18n-1.1.5-10.6.0.1.EL4.i386.rpm openoffice.org-kde-1.1.5-10.6.0.1.EL4.i386.rpm openoffice.org-libs-1.1.5-10.6.0.1.EL4.i386.rpm src: openoffice.org-1.1.5-10.6.0.1.EL4.src.rpm openoffice.org2-2.0.4-5.7.0.1.0.src.rpm

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss