- Discuss - lists.centos.org

dell 2950 servers and centos 4 or 5
by Robert - eLists 14 Jun '07

14 Jun '07

Greetings Part of this may be OT Anyone running CentOS 4 or 5 with the newer Dell 2950 servers? Mainly thinking in terms of basic Internet facing applications Anything special to report good or challenging? Any hardware or drivers issues? Anything not to order as an option or not do? Should one stick to dual core or go to quad core? Does it really matter? What is the best way to order raid1 and raid5 storage on these units with and without hot plug Will either way keep the deployment of CentOS easy and happy. I am used to ordering and deploying hp proliant intel rackmount servers using 3.5 hotplug scsi Im not that familiar with the terms on the dell website for SAS (cant tell if hotplug) although I know what SATA is and I am not familiar with Serial-Attach SCSI hotplug. Thank in advance for your advise or experiences. - rh

3 2

RE: [CentOS] PGP On Centos
by Lanny Marcus 14 Jun '07

14 Jun '07

>Message: 19 >Date: Tue, 12 Jun 2007 11:28:37 -0700 >From: "Karl R. Balsmeier" <karl(a)klxsystems.net> >Subject: [CentOS] PGP On Centos To: centos(a)centos.org Message-ID: <466EE5D5.5080402(a)klxsystems.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >Hey I need to run some pgp commands, -what's the name of the package >supported by Centos that will allow me to work with pgp? There is a front end for GnuPG in KDE. It's called KGpg. Makes it a lot easier to do many tasks.

1 0

Recommendation/pointers please - Need to brush up on CentOS/Linux command line tools
by Dale 14 Jun '07

14 Jun '07

Hi all, I would very much appreciate any suggestions on any online resources, or even a decent book to purchase with the focus of brushing up on Linux command line tools. The focus is on troubleshooting type commands, adding users from command line and so forth. While I am reasonably comfortable using the command line, I will be the first to admit I am slow on some things and have gaps in my knowledge especially for those commands I have never needed to use. I tend to use Webmin for a lot of things. For an upcoming job transition I need to fill in the gaps to be able to do these same things I currently do via webmin at the command line. So any suggestions/pointers, etc would be very much appreciated. I wonder if there is a Linux for Dummies book out there (provided it deals with the command line vs. a GUI). Thanks Dale

9 9

kickstart fails statically built custom kernel: anaconda doesn't honor static NIC/SATA driver in kernel?
by Guolin Cheng 14 Jun '07

14 Jun '07

Kickstart fails for statically built custom booting kernel, although the custom kernel is built form the same version stock kernel source. My anaconda and kernel source are both of stock versions on Centos 5. At the kickstart 'F3' screen, the following error messages appear: Modules to insert tg3 ... ... ERROR: no network devices in choose network device! ERROR: no network drivers for doing kickstart ERROR: unable to bring up network. The network card driver tg3 is statically built into custom kernel to fix NIC driver loading sequence problem( I have mixed type NICs on these boxes), so there is no tg3.ko in my rolled modules/modules.cgz file. Does this problem mean that kickstart/anaconda doesn't recognize NIC/SATA drivers statically built into booting kernel? Anaconda needs everything to exist in dynamic module form (*.ko in modules.cgz)? Thanks.

3 5

How to setup both Transpaent Proxy and firewall on the same Machine.
by Indunil Jayasooriya 14 Jun '07

14 Jun '07

Hi ALL, I want to setup Transpaent Proxy on the box running iptables Firewall. With iptables, I have given below rules. iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -F -t nat iptables -F -t mangle #Enabling ip forwarding echo "1" > /proc/sys/net/ipv4/ip_forward #enable syn cookies (prevent against the common 'syn flood attack') echo "1" > /proc/sys/net/ipv4/tcp_syncookies #do source validation by reversed path echo "1" > /proc/sys/net/ipv4/conf/all/rp_filter #Enable tracking mechanism /sbin/modprobe -a ip_conntrack_ftp ip_nat_ftp iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT DROP iptables -A FORWARD DROP iptables -A OUTPUT DROP in addition to that, There are many rules , ALL work fine. in squid.conf file, I have added below rules, http_port 3128 cache_mem 64 MB cache_dir ufs /var/spool/squid 100 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on And, Then, I did below command. iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 But, When I browse Internet , request will not get ridirected to 3128 port. So I can not use squid as a Transpaent Proxy. Where have I gone wrong? I reffered to below URL. http://www.tldp.org/HOWTO/TransparentProxy.html#toc2 Pls help me. -- Thank you Indunil Jayasooriya

2 2

Ndiswrapper for Realtek 8180L on CentOS 5.0
by Manish Kathuria 14 Jun '07

14 Jun '07

Hello, I had installed CentOS 5.0 on my desktop PC having a Realtek 8180L based PCI wireless card. Since the drivers for this chip are not available in the kernel, I created RPMs for ndiswrapper-1.43 from the source code and installed them. I could configure the wireless card and use it but invariably the system freezes after sometime. No such thing happens if the wireless card is disabled. In the past, I have been using ndiswrapper on the same system on CentOS 4.3 and 4.4 and multiple Fedora distributions without any problem. I have also updated to the latest kernel and recreated the ndiswrapper modules but the problem persists. What could be the possible reason ? Thanks, Manish

1 0

where is xbindkeys- solved
by Jerry Geis 13 Jun '07

13 Jun '07

>I did a "yum provides xbindkeys" and it does not find the package? >Where can I find xbindkeys? >Thanks >Jerry I found it... I was expecting it to be in that big yum repository in the sky but it wasnt. binding keys works like a champ with this. Jerry

1 0

Dual boot in CentOS 4.4
by Andrew Allen 13 Jun '07

13 Jun '07

I've recently upgraded from RedHat 9 to CentOS 4.4. With RH9 I had a dual boot system with Windows XP (RH9 as the default of course!), which was automatically set up when I installed RH9 in the remaining partition after I'd installed XP. However, I appear to have lost my dual boot with CentOS 4.4 (no option to boot into DOS now), even though I still have the Windows XP partition, so how can I (re-) set up the dual boot? Thanks, Andy

2 2

where is xbindkeys
by Jerry Geis 13 Jun '07

13 Jun '07

I did a "yum provides xbindkeys" and it does not find the package? Where can I find xbindkeys? Thanks Jerry

1 0

key bindings
by Jerry Geis 13 Jun '07

13 Jun '07

I am trying to bind keys on centos 5. I want to run my own APP when I hit keypad 4 and a different APP when I hit keypad 5. I was looking at xmodmap but I dont see how to execute my own command? I was looking in the gnome keyboard shortcuts but I dont see how to enter a command it only lets you change the accelerator for a given action. Not create a new action. How can I setup keypad 4 and 5 to run app1 and app2 respectively? THanks, Jerry

1 0

freq scaling on centos 5
by Jerry Geis 13 Jun '07

13 Jun '07

In the old centos 4 we had cpuspeed and we could send a SIGUSR1 to it so the CPU would run at max speed. In centos 5 cpuspeed is not running. (although running with cpuspeed -C will go full speed) what is the correct way now in centos 5 to on the fly say run at full speed then sometime later tell it to drop back down? I have no process to signal any more. Jerry

1 0

anyone using a webcam on centos 4 /5
by Jerry Geis 13 Jun '07

13 Jun '07

Hi all, Was wondering if anyone was using a webcam on centos 4 or 5? I was thinking about getting one but wanted to make sure it will work. Any recommendations? Thanks, Jerry

3 2

Two Issues - Postfix and Gamin
by Brent DiNicola 13 Jun '07

13 Jun '07

Greetings, I have done a bit of searching and I have found that the 4.5 version of Postfix is the following rpm: postfix-2.2.10-1.1.el4.i386.rpm. I had previously had the CentOSPlus version with mysql compiled in and just recently upgraded to 4.5 from 4.4, upon doing this.. the above RPM was installed, which is greater than the postfix with mysql from CentOSPlus, which is the following rpm: postfix-2.2.10-1.RHEL4.2.mysql_pgsql.c4.i386.rpm (note the 2.2.10-1 version without the extra .1 from above.) I tried to manually install the postfix with mysql but of course the versioning is greater on 4.5 rpm, is there a plan to fix this or should I try to roll my own RPM with mysql included? This happened to restart during a 5am auto yum update, causing my server to bounce this morning until I found it, ooops my bad! The second issue is also with 4.5 but with Gamin. I have about 20 Linux CentOS workstations that have been running nicely for several months (almost years) and after the 4.5 upgrade I have noticed that the gam_server process with Gamin keeps sucking up all the CPU cycles after a short time of running. (Sometimes tied to screen saver use but not always). I haven't changed anything in my environment that I can see would cause this problem after the 4.5 upgrade. (Same file server for NFS mounts, same autofs entries etc). Has anyone else noticed this issue and found a work around, I did some digging but most entries on this issue are from the 2005 range which didn't fix my issue and/or were for an older version. The /etc/gamin/gaminrc didn't fix it through various mutations of entries and short of removing the gam_server from libexec, I would like to find a solution or know if anyone else has experienced this issue. Thanks Brent PS. Great work guys on the OS, I have lurked on the Mailing lists for a number of years and you are doing outstanding work and support. Great JOB! -- Brent DiNicola/Whitewolf The Whitewolf of Imrryr <centos .AT. elric.net> http://www.elric.net Disclaimer: Any opinions expressed here are from my dog. Any liabilities fall to the dog.

2 2

ContOS5 and Samba-Vscan
by der knilch 13 Jun '07

13 Jun '07

Hi, I am running a CentOS 5 file server in our Windows network and I wanted to add a anti virus scanner. I got a clamav package from atrmps.net, but the samba module samba-vscan is missing. So I am not able to integrate clamav as an on-demand scanner. Does anyone know, where I can get the samba-vscan module? Thanks knilch

4 4

CentOS-announce Digest, Vol 28, Issue 10
by centos-announce-request＠centos.org 13 Jun '07

13 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0469 Low CentOS 3 s390(x) gdb - security update (Pasi Pirhonen) 2. CESA-2007:0436 Important CentOS 3 s390(x) kernel - updated kernel packages (Pasi Pirhonen) 3. CESA-2007:0430 Low CentOS 3 s390(x) openldap - security update (Pasi Pirhonen) 4. CESA-2007:0431 Low CentOS 3 s390(x) shadow-utils - security update (Pasi Pirhonen) 5. CESA-2007:0403 Moderate CentOS 4 x86_64 freetype - security update (Johnny Hughes) 6. CESA-2007:0403 Moderate CentOS 4 i386 freetype - security update (Johnny Hughes) 7. CESA-2007:0385 Moderate CentOS 4 i386 fetchmail - security update (Johnny Hughes) 8. CESA-2007:0385 Moderate CentOS 4 x86_64 fetchmail - security update (Johnny Hughes) 9. CESA-2007:0430 Low CentOS 3 i386 openldap - security and bug-fix update (Tru Huynh) 10. CESA-2007:0430 Low CentOS 3 x86_64 openldap - security and bug-fix update (Tru Huynh) 11. CESA-2007:0431 Low CentOS 3 i386 shadow-utils - security and bug fix update (Tru Huynh) 12. CESA-2007:0431 Low CentOS 3 x86_64 shadow-utils - security and bug fix update (Tru Huynh) 13. CESA-2007:0436 Important CentOS 3 i386 kernel - updated kernel packages (Tru Huynh) 14. CESA-2007:0436 Important CentOS 3 x86_64 kernel - updated kernel packages (Tru Huynh) 15. CESA-2007:0465 Moderate CentOS 3 i386 pam - security and bug fix update (Tru Huynh) 16. CESA-2007:0465 Moderate CentOS 3 x86_64 pam - security and bug fix update (Tru Huynh) 17. CESA-2007:0469 Low CentOS 3 i386 gdb - security and bug fix update (Tru Huynh) 18. CESA-2007:0469 Low CentOS 3 x86_64 gdb - security and bug fix update (Tru Huynh) 19. CESA-2007:0473 Moderate CentOS 3 i386 gcc - security and bug fix update (Tru Huynh) 20. CESA-2007:0473 Moderate CentOS 3 x86_64 gcc - security and bug fix update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 12 Jun 2007 21:21:01 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0469 Low CentOS 3 s390(x) gdb - security update To: centos-announce(a)centos.org Message-ID: <20070612182101.GU22723(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0469 https://rhn.redhat.com/errata/RHSA-2007-0469.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/gdb-6.3.0.0-1.138.el3.s390.rpm s390x: updates/s390x/RPMS/gdb-6.3.0.0-1.138.el3.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Problem with SquidGuard and DansGuardian
by Jun Salen 13 Jun '07

13 Jun '07

Hi All, I tried installing SquidGuard in a CentOS 4.5 server wit Squid as proxy from RPMForge but uninstalled it since I am having it fails to configure it correctly so I replace it using DansGuardian. But after configuring it and restarting the squid including start of dansguardian service, I observe that there was no effect on our client user. Our user are required have proxy settings on browser in order to browse. What did I miss please. Below are the portion from my dansguardian configuration: # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on #proxyport = 3128 proxyport = 8888 When I change the filterport to 80, there was an error starting dansguardian saying that "Error binding server socket (is something else running on the filter port? [80])", changing it to 8080 have no problem but not able to filter anything. Can anyone please give me pointer on how to do it right? Thanks. junji aisalen.webpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

1 0

why glibc-profile package get obsolete?
by Robinson Tiemuqinke 13 Jun '07

13 Jun '07

Hi, Any one know why the glibc-profile is obsoleted on centos 5 (glibc 2.5)? I've checked the glibc.spec file and find that the --disable-profile option is enabled in the configuration command. So how the original profiling functions are implemented on glibc 2.5? Is there a new way to do the same/similar thing? Thanks a lot. ____________________________________________________________________________________ Luggage? GPS? Comic books? Check out fitting gifts for grads at Yahoo! Search http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz

1 0

gcc 4.x on centOS 5
by arnuld 13 Jun '07

13 Jun '07

i did Google and also searched CentOS web-site and CentOS 5 Release Notes but i did not find what GCC CentOS 5 uses. i need GCC 4.x for my C++ based project work. what GCC version CentOS 5 uses as default ? -- http://arnuld.blogspot.com/

4 3

centos 5 iptables
by CentOS List 13 Jun '07

13 Jun '07

Hi, I applied a set of iptables rules and started iptables without any trouble. But after i edited the rules and restarting it, it gives me "Applying iptables firewall rules: iptables-restore: line 35 failed". I looked into /etc/sysconfig/ for the mentioned file and it was not found. I did a quick check and locate only found /sbin/iptables-restore. I had done updatedb before using locate. Any ideas? thanks

3 6

lvm
by Shawn 13 Jun '07

13 Jun '07

Hello, I have a physical volume with no volume group. # /sbin/pvscan -n WARNING: only considering physical volumes in no volume group PV /dev/sdg2 lvm2 [148.95 GB] Total: 1 [148.95 GB] / in use: 0 [0 ] / in no VG: 1 [148.95 GB] Can I just create a volume group -- for example: # vgcreate my_volume_group /dev/sdg2 and then activate it: # vgchange -a y my_volume_group I don't wish to reformat it or otherwise lose data stored on the volume if possible. Other suggestions? Shawn

2 1

Pinging Static IPs on Lan
by Thom Paine 13 Jun '07

13 Jun '07

For some reason I can't ping or communicate with two of my machines that have static IP's on my lan. My mythbe and mythfe are both set to have static ip's in the event of some sort of power problem the wife can stillwatch tv. After installing CentOS5, I can't communicate with those two machines. I read through the release notes and the docs on dhcp, but I can't seem to see why no machines will communicate with those two computers. Thanks. -- -=/>Thom

2 1

SSH remote port forward
by Ugo Bellavance 13 Jun '07

13 Jun '07

Hi, I'm trying to do a remote port forward, and the remote hosts only listens to 127.0.0.1 on the forwarded port. [ugob@server ~]$ netstat -ln Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:5500 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5666 0.0.0.0:* LISTEN tcp 0 0 ::1:5500 :::* LISTEN tcp 0 0 :::22 :::* LISTEN (I'm trying to tunnel a vnc client connection. From putty's logs, you can see that the tunnel is requested: 2007-06-12 17:34:15 Opened channel for session 2007-06-12 17:34:15 Requesting remote port 5500 forward to 10.0.0.1:5500 2007-06-12 17:34:15 Remote port forwarding from 5500 enabled (I changed the real IP address to 10.0.0.1). In putty, the "Local ports accept connections from other hosts" and "Remote ports do the same" are checked. Any ideas? Regards, ugo

2 2

is CentOS stable enough ?
by arnuld 13 Jun '07

13 Jun '07

hello to all, i am a newbie to CentOS. for my project work i need to have RHEL. so i searched Google for Open alternatives and found CentOS to be most popular. i have used Fedora, the base of RHEL and CentOS. Fedora is the one of the most buggy *NIX distro i have ever seen. since Fedora is the base of RHEL which is the base of CentOS, i just want to know whether CentOS is stable and reliable enough to work with. i will use CentOS primarily for developing softwares and also for watching Bruce Lee's movies ;-) NOTE: please do not take my email is as offense, to be true to you, Fedora just sucks :-( -- http://arnuld.blogspot.com/ -- http://arnuld.blogspot.com/

11 31

BIND Help
by Thom Paine 13 Jun '07

13 Jun '07

I just installed CentOS5 on my server and I have to get everything working on it. I chose to clean load it upgrading from RHEL3 to CentOS5. I'm having trouble understanding the way bind works now and was wondering if anyone has a bit of time to help me with it. I am starting from scratch and I only have my primary domain and one additional domain I host. Thanks. -- -=/>Thom

2 1

SMART errors Hardware_ECC_Recovered and Raw_Read_Error_Rate
by MrKiwi 13 Jun '07

13 Jun '07

Hi All, Im seeing these errors (below) between 2 and 40 times a day, for the last year (or more if i had the older logs) in /var/log/messages. The values consistently toggle between 4 or so values, drifting up and down but never outside the mean +-2 /dev/hda sits around 21 to 38 degrees (according to smartctl) Does anyone know *how* serious they are? I cant find much on the web other than the theory that any error is bad, so replace the disk. Thanks for your time, MrKiwi. Jun 13 04:45:03 myserver smartd[3047]: Device: /dev/hda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 60 to 61 Jun 13 04:45:03 myserver smartd[3047]: Device: /dev/hda, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 60 to 61

1 0

centos 5 GFS/Cluster - configure fence using NIC?
by Karl R. Balsmeier 13 Jun '07

13 Jun '07

How does one configure a fence device in the form of a NIC card in centos 5? Is the gnbd item relevant to this? I have posted the question to linux-cluster also, but they are much less active overall, -so if you have info, massively appreciated... -karl

2 2

Centos openssl-devel
by CentOS List 12 Jun '07

12 Jun '07

Hi, I was trying to install openssl-devel via yum on CentOS 5 x86 and notice that it requires i386 package. Installing: openssl-devel x86_64 0.9.8b-8.3.el5 base 1.8 M openssl-devel i386 0.9.8b-8.3.el5 base 1.8 M And below are the errors. Transaction Check Error: file /usr/share/man/man1/asn1parse.1ssl.gz from install of openssl-0.9.8b-8.3.el5 conflicts with file from package openssl-0.9.8b-8.3.el5 file /usr/share/man/man1/nseq.1ssl.gz from install of openssl-0.9.8b-8.3.el5 conflicts with file from package openssl-0.9.8b-8.3.el5 file /usr/share/man/man1/ocsp.1ssl.gz from install of openssl-0.9.8b-8.3.el5 conflicts with file from package openssl-0.9.8b-8.3.el5 file /usr/share/man/man1/smime.1ssl.gz from install of openssl-0.9.8b-8.3.el5 conflicts with file from package openssl-0.9.8b-8.3.el5 Why does a x86 structure requires i386 package? regards

2 5

Selinux custom policy issue - Centos 5
by Miskell, Craig 12 Jun '07

12 Jun '07

Hi, I've got a Centos 5 box (recently replaced a Centos4 box of the same function). The means of applying custom SELinux policy has changed somewhat from 4->5. I've got it mostly figured out; I have a local.te file with my custom policy and also which defines a few new file types, and a local.fc with appropriate defintions of file contexts. When I run: # checkmodule -M -m -o local.mod local.te # semodule_package -o local.pp -m local.mod # semodule -i local.pp (all in /usr/share/selinux/targeted), the policy gets installed and works properly. However, I can't then use fixfiles or the like to set the custom file contexts (my custom file contexts aren't installed in the main policy). I can apply them manually with chcon, but that's icky and not "The One True Way(tm)". So, if I do: # checkmodule -M -m -o local.mod local.te # semodule_package -o local.pp -m local.mod -f local.fc # semodule -i local.pp I get the following output: libsepol.context_from_record: MLS is enabled, but no MLS context found libsepol.context_from_record: could not create context structure libsepol.context_from_string: could not create context structure libsepol.sepol_context_to_sid: could not convert system_u:object_r:file_upload_store_t to sid /etc/selinux/targeted/contexts/files/file_contexts: line 537 has invalid context system_u:object_r:file_upload_store_t libsemanage.semanage_install_active: setfiles returned error code 1. Where file_upload_store_t is one of my custom types. My local.fc looks like this: /data/spool/blastreq(/.*)? system_u:object_r:blast_req_t /data/spool/blastres(/.*)? system_u:object_r:blast_res_t /data/upload(/.*)? system_u:object_r:file_upload_store_t /data/bfiles(/.*)? system_u:object_r:bfiles_t /var/www/possumbase/html/imagetemp(/.*)? system_u:object_r:http_image_temp_t /var/www/sheep/html/imagetemp(/.*)? system_u:object_r:http_image_temp_t And my local.te contains (selected portions only for now): module local 1.1; require { ... <various normal requires> ... } type blast_req_t,file_type; allow httpd_sys_script_t blast_req_t:file { create getattr write}; allow httpd_sys_script_t blast_req_t:dir { read getattr lock search ioctl add_name write }; ...etc So, looks like I need to do something else, possibly in my local.fc. However, my google-fu is not strong enough to find any actual examples of successful custom file context type creation/installation using selinux modules. I suspect something simple, but haven't a clue what it is. Anyone got any idea what I need to do different? Thanks, Craig Miskell NB: To avoid the whole flamewar: "Turn off SELinux" is not a useful answer in this case ;-) Craig Miskell, Technical Support, AgResearch Invermay 03 489-9279 "I think that if I ever put a *nix distribution together, the mailer's installation will include several pieces of spam in the initial mail spool." -- Chris Reuter ======================================================================= Attention: The information contained in this message and/or attachments from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by AgResearch Limited. If you have received this message in error, please notify the sender immediately. =======================================================================

2 2

kernel-smp not upgrading
by Ugo Bellavance 12 Jun '07

12 Jun '07

Hi, Box is a dual-dual core opteron. Centos4. Just upgraded t the latest kernel (2.6.9-55). The UP kernel installed fine, but the smp kernel didn't install. What should I do? Is that normal? Original kernel was a smp. Regards, Ugo

2 2

PGP On Centos
by Karl R. Balsmeier 12 Jun '07

12 Jun '07

Hey I need to run some pgp commands, -what's the name of the package supported by Centos that will allow me to work with pgp? I need to run pgp --fingerprint key.name or it's equivalent. Pro question. Google searches didn't show much, tried to search for pgp, gnupg, openpgp, pgp on centos, openpgp on centos, centos/pgp. No worthy results came back. Any advice? -karlski

3 3

CentOS 5 and Java
by Niki Kovacs 12 Jun '07

12 Jun '07

Hi, I just installed CentOS 5 on a few machines, to experiment with it. I have some trouble installing a Java plugin for Firefox. I've searched through the forum and read the various info at jpackage.org, and I'm a bit confused. 1) Can you point me to some reliable bit of information, even if it's laconic? 2) If I understand the info on http://jpackage.org/yum.php correctly, Java is not yet available for CentOS 5. Correct me if I'm wrong. Cheers, Niki -- Dyslexics have more fnu.

5 6

ARP Problem ???
by Craig Van Ham 12 Jun '07

12 Jun '07

Hi all, Does any one know if this is normal operating of ARP. Or where to start looking. I am seeing a lot of ARP requests for my router IP from the same IP within seconds. 21:04:41.112929 arp who-has IP tell MY ROUTERS IP 21:04:41.186354 arp who-has IP tell MY ROUTERS IP 21:04:41.372972 arp who-has IP tell MY ROUTERS IP 21:04:41.546921 arp who-has IP tell MY ROUTERS IP 21:04:41.640253 arp who-has IP tell MY ROUTERS IP 21:04:42.104746 arp who-has IP tell MY ROUTERS IP 21:04:42.208952 arp who-has IP tell MY ROUTERS IP 21:04:42.212961 arp who-has IP tell MY ROUTERS IP 21:04:42.304306 arp who-has IP tell MY ROUTERS IP 21:04:42.330411 arp who-has IP tell MY ROUTERS IP 21:04:42.331394 arp who-has IP tell MY ROUTERS IP 21:04:42.332737 arp who-has IP tell MY ROUTERS IP 21:04:42.332740 arp who-has IP tell MY ROUTERS IP 21:04:42.332742 arp who-has IP tell MY ROUTERS IP 21:04:42.332744 arp who-has IP tell MY ROUTERS IP 21:04:42.332746 arp who-has IP tell MY ROUTERS IP 21:04:42.332748 arp who-has IP tell MY ROUTERS IP 21:04:42.334763 arp who-has IP tell MY ROUTERS IP 21:04:42.342436 arp who-has IP tell MY ROUTERS IP 21:04:42.344443 arp who-has IP tell MY ROUTERS IP 21:04:42.350132 arp who-has IP tell MY ROUTERS IP 21:04:42.352140 arp who-has IP tell MY ROUTERS IP 21:04:42.358496 arp who-has IP tell MY ROUTERS IP 21:04:42.360168 arp who-has IP tell MY ROUTERS IP 21:04:42.360172 arp who-has IP tell MY ROUTERS IP 21:04:42.362177 arp who-has IP tell MY ROUTERS IP 21:04:42.362180 arp who-has IP tell MY ROUTERS IP 21:04:42.364189 arp who-has IP tell MY ROUTERS IP 21:04:42.366203 arp who-has IP tell MY ROUTERS IP 21:04:42.368200 arp who-has IP tell MY ROUTERS IP 21:04:42.369542 arp who-has IP tell MY ROUTERS IP 21:04:42.370208 arp who-has IP tell MY ROUTERS IP 21:04:42.370211 arp who-has IP tell MY ROUTERS IP 21:04:42.370877 arp who-has IP tell MY ROUTERS IP 21:04:42.372884 arp who-has IP tell MY ROUTERS IP 21:04:42.376232 arp who-has IP tell MY ROUTERS IP 21:04:42.376898 arp who-has IP tell MY ROUTERS IP 21:04:42.377233 arp who-has IP tell MY ROUTERS IP 21:04:42.377901 arp who-has IP tell MY ROUTERS IP 21:04:42.378242 arp who-has IP tell MY ROUTERS IP 21:04:42.378245 arp who-has IP tell MY ROUTERS IP 21:04:42.378247 arp who-has IP tell MY ROUTERS IP

4 9

CentOS-announce Digest, Vol 28, Issue 9
by centos-announce-request＠centos.org 12 Jun '07

12 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0403 Moderate CentOS 4 ia64 freetype - security update (Pasi Pirhonen) 2. CESA-2007:0403 Moderate CentOS 3 ia64 freetype - security update (Pasi Pirhonen) 3. CESA-2007:0473 Moderate CentOS 3 ia64 gcc - security update (Pasi Pirhonen) 4. CESA-2007:0465 Moderate CentOS 3 ia64 pam - security update (Pasi Pirhonen) 5. CESA-2007:0473 Moderate CentOS 3 s390(x) gcc - security update (Pasi Pirhonen) 6. CESA-2007:0403 Moderate CentOS 3 s390(x) freetype - security update (Pasi Pirhonen) 7. CESA-2007:0403 Moderate CentOS 4 s390(x) freetype - security update (Pasi Pirhonen) 8. CESA-2007:0465 Moderate CentOS 3 s390(x) pam - security update (Pasi Pirhonen) 9. CESA-2007:0469 Low CentOS 3 ia64 gdb - security update (Pasi Pirhonen) 10. CESA-2007:0430 Low CentOS 3 ia64 openldap - security update (Pasi Pirhonen) 11. CESA-2007:0431 Low CentOS 3 ia64 shadow-utils - security update (Pasi Pirhonen) 12. CESA-2007:0436 Important CentOS 3 ia64 kernel - updated kernel packages (Pasi Pirhonen) 13. CESA-2007:0403-01: Moderate CentOS 2 i386 freetype security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 11 Jun 2007 22:59:40 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0403 Moderate CentOS 4 ia64 freetype - security update To: centos-announce(a)centos.org Message-ID: <20070611195940.GI22723(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0403 https://rhn.redhat.com/errata/RHSA-2007-0403.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/freetype-2.1.9-6.el4.ia64.rpm updates/ia64/RPMS/freetype-demos-2.1.9-6.el4.ia64.rpm updates/ia64/RPMS/freetype-devel-2.1.9-6.el4.ia64.rpm updates/ia64/RPMS/freetype-utils-2.1.9-6.el4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

NFSv4 hangs on file open
by Pawel Salek 12 Jun '07

12 Jun '07

Hi, I have a relatively loaded CentOS5 server (64-bit, dual core) and a mixed bag of Fedora 6/CentOS4, 32-, and 64-bit clients. NFSv3 works without problem. References over NFSv4 hang occasionally, in particular on file opening. I wonder whether there is anybody here who can help to trace it, or can suggest a more appropriate forum? The one hang that I have been able to trace involved only CentOS5/2.6.18-8.1.4.el5. The server is 64-bit, client: 32-bit. Hang happened when a program was about to be executed from NFSv4 share. LD_LIBRARY_PATH included a directory on this share. gdb backtrace revealed that the process was being loaded in memory, and an attempt to open (non-existing) library file never completed. /Pawel strace -p 19289 Process 19289 attached - interrupt to quit open("/pkg/pgi/5.2-4//linux86/5.2/lib/libg2c.so.0", O_RDONLY <unfinished ...> gdb program.x 19289 0x0063cb04 in open () from /lib/ld-linux.so.2 (gdb) where 0 0x0063cb04 in open () from /lib/ld-linux.so.2 1 0x0062d6c5 in open_verify () from /lib/ld-linux.so.2 2 0x0062dc6a in open_path () from /lib/ld-linux.so.2 3 0x0063055f in _dl_map_object () from /lib/ld-linux.so.2 4 0x006340d6 in openaux () from /lib/ld-linux.so.2 5 0x00635b46 in _dl_catch_error () from /lib/ld-linux.so.2 6 0x0063469a in _dl_map_object_deps () from /lib/ld-linux.so.2 7 0x0062b40e in dl_main () from /lib/ld-linux.so.2 8 0x0063b8bb in _dl_sysdep_start () from /lib/ld-linux.so.2 9 0x006292b8 in _dl_start () from /lib/ld-linux.so.2 10 0x00628817 in _start () from /lib/ld-linux.so.2 The NFSv4 is automounted (direct mount): cat /etc/auto.pkg /pkg -fstype=nfs4 server:/i32 For what is worth, I tried NFSv4 with CentOS4 server but it was hopeless (server would stop responding or panic). Older kernel releases of Fedora6 (2.6.19?) were hopeless too, with similar symptoms. Anybody knows who may be interested in some detailed bug report, or help debugging the problem? Pawel PS. The server logs plenty of messages: NFSD: setclientid: string in use by client(clientid 46604ac4/00000016) but my rpc.idmapd configuration is correct as far as I can tell..

1 0

Re: is CentOS stable enough ?
by Andy Goss 12 Jun '07

12 Jun '07

On Monday 11 June 2007 22:00, arnuld <geek.arnuld(a)gmail.com> wrote: > i am a newbie to CentOS. for my project work i need to have > RHEL. so i searched Google for Open alternatives and found CentOS to > be most popular. > > i have used Fedora, the base of RHEL and CentOS. Fedora is the one of > the most buggy *NIX distro i have ever seen. since Fedora is the base > of RHEL which is the base of CentOS, i just want to know whether > CentOS is stable and reliable enough to work with. From one newbie to another, I suggest you look at the CentOS site, in particular the page http://www.centos.org/modules/tinycontent/index.php?id=3 As I understand it, RHEL is not based on Fedora. Fedora is something of a testbed for things that often appear in future versions of RHEL, so the resemblance is not surprising. RHEL is industrial strength Linux and so does not have the latest but still wobbly innovations. What it does have is good and stable, and quite recent enough for most purposes. CentOS takes the RHEL source code, which is Open Source, and compiles it as CentOS. They aim to make it totally compatible with RHEL. CentOS is as stable as RHEL, and has what looks like a better update/upgrade process. If your project is on RHEL, then CentOS is the tool for you, just make sure you install the matching version.

3 2

Centos5 and X respawning problem
by Scott Ehrlich 12 Jun '07

12 Jun '07

I just installed CentOS 5 on a Sony Vaio V505 (PCG-V505DC2P) and it worked perfectly. A full yum update also worked fine. The user made various changes to it over the weekend, and how I'm faced with trying to undo endless "INIT: Id "x" respawning too fast: disabled for 5 minutes" error messages. I've spent half the day googling various answers. init 5 will not do anything. startx and xinit do work, but don't provide the proper window manager nor X window sessions. Now that I think of it, after the first yum update, the system defaulted to a tty, and I had to CNTL-Alt-F7 to switch to the X display. I also tried to install the ATI video driver, but that claimed an error in the end. I tried to comment out x:5:respawn... at #Run xdm in runlevel 5 at the end of /etc/inittab then initiate init 5 from a tty session, but that didn't do any good. Ideas would be most appreciated. Thanks. Scott

3 3

System hang on messagebus -> problem with ldap?
by Sebastian Marten 12 Jun '07

12 Jun '07

Hi list, I've made a new CentOS 5 install with all updates. My users are sored in a ldap directory. If i reboot the machine, CentOs hangs at: starting messagebus I found the same problem at Fedora 5. The solution should be to change "etc/init.d/ladp" from 27 to 21 so it starts before messagebus (22) So is this the "right" solution or is there a other way? Thanks

3 3

Suspend2 rpm for Centos 4.5 and 5.0?
by Robert Moskowitz 12 Jun '07

12 Jun '07

Is there a source for Suspend2 available as an rpm for Centos 4.5 and/or 5.0? And to use it would it be necessary to recompile the kernel?

2 2

mdadm Linux Raid 10: is it 0+1 or 1+0?
by Miguel Medalha 12 Jun '07

12 Jun '07

The relevance of this question can be found here: http://aput.net/~jheiss/raid10/ I read the mdadm documents but I could not find a positive answer. I even read the raid10 module source but I didn't find the answer there either. Does someone here know it? Thank you!

2 4

CentOS 3.9
by Dag Wieers 11 Jun '07

11 Jun '07

Hi, Red Hat started releasing security advisories and update packages that are part of RHEL3 U9. Still, on RHN there are no RHEL3 U9 ISO images released yet. As usual, CentOS will make available CentOS 3.9 when it is deemed ready. So there is no need to ask when it is going to be released :) Kind regards, -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [all I want is a warm bed and a kind word and unlimited power]

6 7

CentOS-announce Digest, Vol 28, Issue 8
by centos-announce-request＠centos.org 11 Jun '07

11 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0385 Moderate CentOS 3 ia64 fetchmail - security update (Pasi Pirhonen) 2. CESA-2007:0385 Moderate CentOS 4 ia64 fetchmail - security update (Pasi Pirhonen) 3. CESA-2007:0385 Moderate CentOS 3 s390(x) fetchmail - security update (Pasi Pirhonen) 4. CESA-2007:0385 Moderate CentOS 4 s390(x) fetchmail - security update (Pasi Pirhonen) 5. CESA-2007:0403 Moderate CentOS 3 i386 freetype - security update (Tru Huynh) 6. CESA-2007:0403 Moderate CentOS 3 x86_64 freetype - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Sun, 10 Jun 2007 19:18:45 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0385 Moderate CentOS 3 ia64 fetchmail - security update To: centos-announce(a)centos.org Message-ID: <20070610161845.GE22723(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0385 https://rhn.redhat.com/errata/RHSA-2007-0385.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/fetchmail-6.2.0-3.el3.4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Problems with UserDir directive on CentOS 5
by Niki Kovacs 11 Jun '07

11 Jun '07

Hi, I'm currently setting up a local LAMP server to test various apps. Starting from the out-of-the-box configuration of Apache, I test it, and it's OK: http://localhost shows Apache's default page OK in Firefox. Now I edit /etc/httpd/conf/httpd.conf and replace 'UserDir disabled' by 'UserDir public_html'. I restart Apache. Then, as a normal user (kikinovak): $ cd $ mkdir public_html I edit a basic index.html file, then put it into this directory. I open Firefox at http://localhost/~kikinovak/ ... and I get the following error message: Forbidden You don't have permission to access /~kikinovak/ on this server. Apache/2.2.3 (CentOS) Server at localhost Port 80 Q: what did I do wrong? (I've done this successfully on Slackware and Debian before) Any suggestions? Niki

4 5

(no subject)
by Craig Van Ham 11 Jun '07

11 Jun '07

Hi

2 1

Where can I find a package for gtk-gnutella?
by John Lagrue 11 Jun '07

11 Jun '07

Running CentOS 4.5. I would think this should be simple, but I can't find a package for the above. Any pointers? JDL

2 3

Dovecot .99 Bug - LF not found where expected
by John Hinton 10 Jun '07

10 Jun '07

After about three years of this, it seems I have finally gotten somewhere near to the bottom of this. The symptom: Suddenly a user cannot download their email. Checking again through SquirrelMail, I get an error which says a log was written. Going to the logs I see "imap(username): Error indexing mbox file /var/mail/username: LF not found where expected" Using Webmin's read mail module, I can see the messages. So, I move them to another account, but this is not yet the end of it. I was at first having to delete the mbox and then I'd send a test message in to recreate the mbox. But today, I tried a different tack. I opened the now empty mbox in vi and found one blank line (LF). I deleted that line and then moved the mail back in and everything was fixed. So the line was still left behind. The next time this happens, I'm going to try to delete a LF from the top of the mbox file to see if it is fixed without moving the mail. I have read several places, although this is extremely difficult to track as there seems to be a multiple from address issue for some releases.. but anyway, I did finally find that dovecot .99 has an issue with leaving behind an extra linefeed at the beginning of the mbox. Deleting this linefeed fixes the problem. Supposedly dovecot 1 has fixed this problem. I have found many reports of problems on Fedora and RedHat. Also, Debian has a closed bug report regarding this issue as they have moved forward to dovecot-1.0 and it doesn't have this bug. The issue seems to not have any relation to the mailserver, as I saw both reports of problems on at least Sendmail and Postfix. Why are we still bugged with this? Seems that this is a bug that RedHat should be aware of? The problem is it only rarely happens. I have no idea how to repeat the issue. It always seems to be an Outlook user, although that is by far the most prevalent email client in use by our users and it might just be chance. So, what to do from here? Bug report to RedHat? This is most irritating! I can't even guess how many times I've fixed these mboxes. I'm about ready to toss dovecot in the trash until 1 becomes the RH standard unless there is a fix or upgrade from Redhat. Thanks, John Hinton

10 22

tar question
by Tom Brown 10 Jun '07

10 Jun '07

Hi Using tar i normally create an archive etc and then unpack that archive, job done. But i am copying from one filesystem to another on the same host, they are 2 seperate nfs filesystems, and i wonder is it possible to use tar to do this as opposed to say rsync etc. tar -cvf /some/input/dir to/here etc ? thanks

7 7

Standard RH iptables analysis
by Al Sparks 10 Jun '07

10 Jun '07

This is a standard RedHat / CentOS firewall configuration, where I told it, through the standard RH setup GUI, that I want ssh and snmp allowed through. Chain INPUT (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT icmp -- anywhere anywhere icmp any ACCEPT ipv6-crypt-- anywhere anywhere ACCEPT ipv6-auth-- anywhere anywhere ACCEPT udp -- anywhere 224.0.0.251 udp dpt:5353 ACCEPT udp -- anywhere anywhere udp dpt:ipp ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:snmp ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited The way I read this, though, the first rule in the RH-Firewall-1-INPUT chain applies to all packets coming in, which it accepts. That's all protocols from "anywhere" going to "anywhere". So shouldn't the packet no longer be evaluated past that rule? I know that when I have this enabled, it's stopping packets. So I'm reading this wrong. What am I getting wrong? === Al

5 5

CentOS and Wordpress
by petevg＠gmail.com 10 Jun '07

10 Jun '07

Hi All, I am currently am responsible for maintaining a website built on Apache 2, running on some CentOS 4 (64 bit version) boxes. Thus far, the website has comprised a few HTML pages, and some dynamic pages generated by perl scripts. The CentOS install is pretty vanilla -- the only departure I've made from the default server install is to install awstats from the rpmforge repositories. This week, I tried to install Wordpress, and have run into a brick wall that several days of experimentation and deep consultation with Google have been unable to get me over. Here's the situation: I installed the mysql, mysql_server, and php packages, unpacked the Wordpress tarball into a "blog" directory, and make the necessary changes to wp-config.php. The MySQL database works just fine, and when I visit the blog directory, index.php runs and informs me that I need to surf over to install.php to complete the WordPress configuration, which is expected. But when I try to browse to install.php, Firefox gives me the option to save it, or run it locally -- it doesn't seem to want to run as a server side script, for some reason. I don't see any obvious issues with my php installation that would cause this -- /etc/httpd/conf.d/php.conf is in place, is loading module_php4, and has added a php application type to the apache setup. I did remember to restart the http daemon after installing php. I don't see any errors in the logs -- all I see in the apache logs is a GET request for install.php. The really confusing thing is that one php script -- index.php -- works just fine, while another php script -- install.php -- does not. Has anybody run into a similar problem with WordPress, or with php4 in general? It feels like I'm running afoul of some bit of overzealous security that's trying to stop php from doing Bad Things to the system, but, sans error messages, it's been difficult to figure out what bit of security might be responsible, and how I might go about coaxing CentOS into allowing me to run WordPress. And so I have come here to tap into the wisdom of the mailing list. Might anybody here have some hints as to what I might do to solve this puzzle? Thank you, -- ~PeteVG The truth does not change according to our ability to stomach it. ~ Flannery O'Connor

4 4

procmail, and the care and feeding of mailing list content received
by R P Herrold 10 Jun '07

10 Jun '07

Some threads just go on too long. Personally I think a troll has hijacked the main centos list again and is inducing food fight behaviours while that troll perfectly 'innocently' asserting that it is just respoding to all email. see: http://video.google.com/videoplay?docid=-4216011961522818645 for a discussion of the problem of 'capture' in FOSS projects. But if one loses interest in a thread, it is easy enough to tune them out: 1. Install procmail; yum knows how 2. Add a mark and drop ruleset [herrold@new .procmail]$ cat ~/.procmail/killfilerc # # mark them :0fh ^ *List-Id:.*centos\.centos\.org ^ *Subject:.*CentOS Based Linux Firewall Document *!^X-brand | formail -A "X-brand: killfile " # and dump them :0 w * ^X-brand: killfile /dev/null 3. Integrate it in mailhandling; a fragment from: /home/herrold/.procmailrc # easy drops INCLUDERC=$HOME/.procmail/killfilerc ----------------------------------- easy enough to save 'caught' pieces to a file, rather than devnull until you are certain collateral damage has not been induced; see the procmail manpage series for a full discussion. -- Russ Herrold

2 2

Redhat Cluster Manager?
by Dave Augustus 10 Jun '07

10 Jun '07

I just spend a few hours working with Redhat Cluster Manager. After working through some things that deal with Centos versus the *upstream provider*, I started configuring a cluster. Even to the point of using HP ILO as the fence. Anyone using this in production? With GFS ? I have used Heartbeat V1 in the past and I am deploying a new colo so I am looking at options. Any feedback is welcome. Thanks, Dave

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss