- Discuss - lists.centos.org

CentOS 5 problem with 2xRocketRaid 2220
by Adrian Sevcenco 06 Jun '07

06 Jun '07

Hi! I have an supermicro storage server http://www.supermicro.com/products/chassis/3U/932/SC932T-R760.cfm with two RocketRaid 2220. my problem is that at install a looong time is spent on detecting some ataxx in order to end in ATA[0-15].00 : Failed to set xfermode (err_mask=0x4) for each channel from 16 it can take some 15-20 s. the same happens at boot time (which can take some 4-5 min). Is there a way to avoid this? Thank you for any help, Best regards, Adrian

1 0

Fedora Directory Authentication on CentOS 5
by first last 06 Jun '07

06 Jun '07

Hi, I am trying to set up a Fedora Directory server for centralised authentication. I configure the directory server, add a user called (via the Java GUI) test and then, using system-config-authentication, enable LDAP on both tabs. I then try to log-in using the test account I set up on the directory, but I get an error message in /var/log/messages: May 30 16:28:27 ds1 sshd(pam_unix)[4445]: check pass; user unknown May 30 16:28:27 ds1 sshd(pam_unix)[4445]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=localhost.localdomain which seems to indicate that it cannot find the user in the directory. The server is accepting connections on the standard LDAP port. Am I missing anything? Thanks Gabriel ___________________________________________________________ What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship. http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

3 4

CentOS 5 Issues Booting Under VMWare
by hkclark＠gmail.com 06 Jun '07

06 Jun '07

Hi, VMWare has been a great tool for me to experiment with CentOS 3 and CentOS 4. However, I'm running into issues with CentOS 5. First, it is *extremely* slow to boot (as in it takes over an hour to boot CentOS 5 on a machine that boots CentOS 3 & 4 in less than one minute). Then, after an hour of slowly watching the messages go by on the console and the CPU of the host machine pegged at 100%, I get this error: VMware Workstation unrecoverable error: (vcpu-0) NOT_REACHED F(562):1742 A log file is available in ... I have done a "minimal install" of CentOS 5 (all checkboxes in the category/task selection screen are unchecked -- so to X-Windows involved) and the virtual machine has 750MB of RAM. I'm using VMWare Workstation 4.5 and the host OS is Windows XP Pro. I have not been able to install the VMWare tool since I can't get it to finish booting. Has anyone else run into this? I have seen some discussion on the list about VMWare and CentOS 5, but nothing that seemed to match what I'm running into. Thanks, Kennedy

6 11

CentOS 4.5 FTP install
by Ron Yorston 06 Jun '07

06 Jun '07

I'm having trouble getting CentOS 4.5 to install via FTP. I have a local FTP server with a mirror of 4/os/i386. I boot from the first CentOS 4.5 CD and enter 'linux askmethod'. I choose the FTP installation method and DHCP for the IP configuration. At the FTP Setup screen I enter the IP address of my server and the path of the i386 directory. Selecting OK there takes me to the CD Found screen that asks if I want to perform a media test. Skipping the media test takes me back to the FTP Setup screen. (Performing the media test shows that my CD is OK, and then takes me back to the FTP Setup screen.) All I can do now is bounce between the FTP Setup and CD Found screens. My FTP server log shows an attempt to fetch CentOS/base/product.img, which doesn't exist. Any idea what's going on here? Ron

6 15

CentOS Based Linux Firewall Document
by pctech＠mybellybutton.com 06 Jun '07

06 Jun '07

I know that some of you from the list have asked me in the past for a copy of my CentOS based Linux Firewall document. There are also those that have no clue what I am talking about. This is for the former group... There is a new version of my document out. It's changed quite a bit since the last person asked me for it. Some of the changes are: * Updated the scripts in the Useful Shell Scripts section. * Changed the document format to reflect more of a professional document. * Added High Availability. * Many other small items. There is a complete changelog "built in" in the document, so you can compare it to the version that you already have to see what's changed. It's still a PDF, so you don't have to worry about having Word or OpenOffice to view it. Just as before, e-mail me at fwdoc(a)mybellybutton.com to request a copy of the latest version. Thanks.

3 2

Error on CentOS 5
by Miguel Medalha 06 Jun '07

06 Jun '07

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2 Intel Gb NICs - 1 Intel 10/100 NIC Error message follows: --------------------------------------------------------------------- ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back --------------------------------------------------------------------- Thank you Miguel

1 1

x display issue
by Dave 06 Jun '07

06 Jun '07

Hello, I've got a new Centos5 install and got x installed with gnome on it. The problem is the display looks awful and keeps flickering. It failed the monitor probe and doesn't have horizontal and vertical refresh rates in the xorg.conf file. I believe this is part or all of the issue, i took it down to 8-bitt color and 800x600 resolution, that didn't help. The video card is an sis 741/760 AGP integrated job, the monitor has no designation, except compaq. Does anyone know how i can find the values i need? Thanks. Dave.

2 1

Trouble connecting to CentOS 5.0 host sound device from Windows guest on VMWare Workstation 5.5.4
by Mark Hull-Richter 05 Jun '07

05 Jun '07

I am running VMWare Workstation 5.5.4 on a CentOS 5.0 host (2.6.18-8.1.4 kernel) and I have been haiving some trouble with my sound device on the Guest Windows XP SP2 OS. When I first had trouble under CentOS 4.4, WS 5.5.3, it was usually when the sound device on the host was actually busy. However, now I can't use the sound device at all - I keep getting this error: "Failed to open sound device /dev/dsp: Device or resource busy Failed to connect virtual device sound." on EVERY attempt to connect to the CentOS native sound driver. I am running a few command windows, SeaMonkey and VW WS and nothing else. ps -ef reveals nothing about /dev/dsp and I'm not entirely sure where else to look. I had shut off the sound device (disconnected by default) because Windows likes to make noise and this routinely not only did not work, but it also kept interrupting everything I was doing with gnome windows announcing the above error. Now it just doesn't connect at all, no matter what the host is doing. Note: This is my work machine. At home I run VMWare Server 1.0.3 and only have this problem when the sound device is in fact busy (like I'm playing music or watching a video or something). I'd like to be able to run sound in the Windows guest.... -- Mark Hull-Richter DATAllegro (www.datallegro.com) 85 Enterprise, 2nd Floor, Aliso Viejo, CA 92656 Ofc: 949-680-3082 fax: 949-680-3001

1 0

RE: [CentOS] Re: CentOS 5 Issues Booting Under VMWare
by pctech＠mybellybutton.com 05 Jun '07

05 Jun '07

Scott Silva spake the following on 6/5/2007 8:26 AM: > hkclark(a)gmail.com spake the following on > 6/5/2007 5:19 AM: >> Hi, >> >> VMWare has been a great tool for me to experiment with CentOS 3 and >> CentOS 4. However, I'm running into issues with CentOS 5. First, it >> is *extremely* slow to boot (as in it takes over an hour to boot >> CentOS 5 on a machine that boots CentOS 3 & 4 in less than one >> minute). Then, after an hour of slowly watching the messages go by on >> the console and the CPU of the host machine pegged at 100%, I get this >> error: >> >> VMware Workstation unrecoverable error: (vcpu-0) >> NOT_REACHED F(562):1742 >> A log file is available in ... >> >> I have done a "minimal install" of CentOS 5 (all checkboxes in the >> category/task selection screen are unchecked -- so to X-Windows >> involved) and the virtual machine has 750MB of RAM. I'm using VMWare >> Workstation 4.5 and the host OS is Windows XP Pro. I have not been >> able to install the VMWare tool since I can't get it to finish >> booting. >> >> Has anyone else run into this? I have seen some discussion on the >> list about VMWare and CentOS 5, but nothing that seemed to match what >> I'm running into. >> >> Thanks, >> Kennedy > I'm doing an install right now. I'll let you know my results. > > Disregard my input. I am running VMWare 5.4 not 4.5, so my tests are meaningless to you. ---------------------------------------------- I am running the free VMWare Server 1.0.3 and CentOS 5 seems to load fine for me. It loads up in a reasonable amount of time given that it is running on a workstation in a virtual session. What is the configuration of your VMWare session? I set mine up using mostly default choices. I did change the "system type" To RHEL 4 and I bumped the default RAM up to 512M. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!! _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

HP SureStore 40x6e - Multiple LUN's problem on CentOS 4.4
by Eric Solomon 05 Jun '07

05 Jun '07

This is one of those autoloaders where the tape drive and the library share a SCSI ID, but are on different LUN's - specifically the library should be on LUN 1. Apparently since so many devices like this are broken, recent kernels don't probe beyond the first LUN, so it's not detecting the library. My /proc/scsi/scsi output: Attached devices: Host: scsi4 Channel: 01 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD 0 RAID1 70G Rev: 1L47 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi5 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: C5713A Rev: H910 Type: Sequential-Access ANSI SCSI revision: 02 I read somewhere that this shouldn't be a problem with RHEL 4, but I can't seem to get it detected. I tried to add options scsi_mod max_scsi_luns=6 to modprobe.conf and regenerated initrd - no change. Tried adding max_luns=6 max_report_luns=6 to the kernel line in grub.conf, no change. I tried to manually add it by doing: echo "scsi add-single-device 0 0 5 1" > /proc/scsi/scsi but again, no change. Any suggestions? Am I on the right track and just doing something wrong? I know recompiling the kernel is not the best thing, but not sure what to do here. Thanks. -- Eric Solomon Senior Unix Engineer Clickability ____________________________________ Simplifying Content Management 130 Battery Street, Suite 300 San Francisco CA 94111 Tel 415-575-5125 eric(a)clickability.com Fax 415-538-0839 http://www.clickability.com

1 1

Centos 5 problems on Shuttle XPC
by Gernot Stocker 05 Jun '07

05 Jun '07

Hi, does somebody else experience booting problems after normal installation on SD32G2 based Shuttle systems. A CentOS 5.0 installation can be performed without any problems but after the first reboot the systems are just stopping the boot process after the grub is searching for the kernel. The last line is some- thing like: [ Linux-initrd @ 0x37db8000, 0x237858 bytes]. We tried already the newest update of the CentOS 5 kernel, the newest centosplus kernel and also FC6 kernel with always the same result. No error message, nothing! Unfortunately we have 15 machines of this type which should be installed with Linux ASAP (and no, I was not asked when somebody else has bought these machines). Every hint or experience with such system is welcome, thanks, Gernot -- Gernot Stocker, Institute for Genomics and Bioinformatics(IGB) Petersgasse 14, 8010 Graz, Austria Tel.: ++43 316 873 5345 http://genome.tugraz.at

2 2

CentOS 4.4 with CrushFTP and Plesk 8.1
by Paul C 05 Jun '07

05 Jun '07

Does anyone have this combo working together or something close CentOS 4.4 with CrushFTP and Plesk 8.1 Would appreciate any setup tips No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.9/832 - Release Date: 4/06/2007 18:43

1 0

mime-type change?
by James B. Byrne 05 Jun '07

05 Jun '07

I have a recently (last Friday) updated CentOS 4.5 desktop running OOo 2.2 that, since this morning, displays OpenOffice .odt files as application:x-java-archives and has replaced the open office icon on my desktop with the java icon for these files. I have looked in both: /usr/share/mime-info/gnome-vfs.mime and /usr/share/mime-info/file-roller.mime And cannot see any reference to OpenOffice v2 document types at all, or any relation between x-java-archives and odt extensions. What I find instead is this in /usr/share/mime-info/gnome-vfs.mime: ---> # OpenOffice 6.x document types application/vnd.sun.xml.calc ext: sxc application/vnd.sun.xml.calc.template ext: stc application/vnd.sun.xml.draw ext: sxd application/vnd.sun.xml.draw.template ext: std application/vnd.sun.xml.impress ext: sxi application/vnd.sun.xml.impress.template ext: sti application/vnd.sun.xml.math ext: sxm application/vnd.sun.xml.writer ext: sxw application/vnd.sun.xml.writer.global ext: sxg application/vnd.sun.xml.writer.template ext: stw ... application/x-java-archive ext: jar ear war <--- The 6.0 makes no sense to me at all, but as it is only a comment it does not harm I guess. My questions are: Where are the odt and similar OpenOffice v2 mime-types cataloged and why are they now associated with Java Archives? I had OOo2 documents presented by OOo icons earlier today, the change only appeared to happen when I moved some OOo documents off of my desktop and into another folder. Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 1

Mgetty for out of band management - which modem?
by Nick 05 Jun '07

05 Jun '07

Hi, We're thinking of using Mgetty and a modem to allow us some out of band management access to sites if the ADSL connection fails... Just wondered if anyone had a recommended USB modem they've used on Centos/Mgetty as Hayes compatible serial modems seem to be quite rare these days?

4 8

Totem Can't Read .wmv Files
by Robert Thompson 05 Jun '07

05 Jun '07

When I try to read a .wmv file, I get the error message: "Totem could not play 'file://tmp/F15.wmv'. You do not have a decoder installed to handle this file. You might need to install the necessary plugins.' Granted that I am missing something, what is it, and where do I get it / install it? Thanks in advance -- Bob T.

7 8

pam_ldap-184 compile error
by Bubuk Gabrok 05 Jun '07

05 Jun '07

I tried to compile pam_ldap-184 but it gave lots of error msgs. BTW, I have successfully compiled nss_ldap-255. For pam_ldap, my configure looks like: ./configure --with-ldap-lib=openldap --with-ldap-dir=/usr/local --with-ldap-conf-file=/usr/local/etc/openldap/ldap.conf and the following is the configure output --- start of configure output --- creating cache ./config.cache checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking build system type... i686-pc-linux-gnu checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... missing checking for working autoconf... missing checking for working automake... missing checking for working autoheader... missing checking for working makeinfo... missing checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking how to run the C preprocessor... gcc -E checking for a BSD compatible install... /usr/bin/install -c checking for security/pam_appl.h... no checking for security/pam_misc.h... no checking for security/pam_modules.h... no checking for pam/pam_appl.h... no checking for pam/pam_misc.h... no checking for pam/pam_modules.h... no checking for des.h... no checking for crypt.h... yes checking for lber.h... yes checking for ldap.h... yes checking for ldap_ssl.h... no checking for sasl/sasl.h... no checking for sasl.h... no checking for main in -ldl... yes checking for main in -lpam... no checking for main in -lresolv... yes checking for main in -lcrypt... yes checking for main in -lnsl... yes checking for gethostbyname... yes checking for main in -llber... yes checking for main in -lldap... yes checking for ldap_init... yes checking for ldap_get_lderrno... no checking for ldap_set_lderrno... no checking for ldap_parse_result... yes checking for ldap_memfree... yes checking for ldap_controls_free... yes checking for ldap_set_option... yes checking for ldap_get_option... yes checking for ldapssl_init... no checking for ldap_start_tls_s... yes checking for ldap_pvt_tls_set_option... yes checking for ldap_initialize... yes checking for ldap_sasl_bind... yes checking for ldap_sasl_interactive_bind_s... yes checking for gethostbyname_r... yes checking whether gethostbyname_r takes 6 arguments... 6 checking for ldap_set_rebind_proc... yes checking whether ldap_set_rebind_proc takes 3 arguments... 3 updating cache ./config.cache creating ./config.status creating Makefile creating config.h --- end of configure output --- After running make, I got these error msgs below. I need help, please. TIA. --- start of compile error msgs --- gcc -DHAVE_CONFIG_H -DLDAP_REFERRALS -DLDAP_DEPRECATED -D_REENTRANT -I/usr/local/include -g -O2 -Wall -fPIC -c pam_ldap.c In file included from pam_ldap.c:131: pam_ldap.h:35:34: security/pam_modules.h: No such file or directory In file included from pam_ldap.c:131: pam_ldap.h:329: error: syntax error before '*' token pam_ldap.h:330: error: syntax error before '*' token pam_ldap.h:334: error: syntax error before '*' token pam_ldap.h:335: error: syntax error before '*' token pam_ldap.h:339: error: syntax error before '*' token pam_ldap.h:343: error: syntax error before '*' token pam_ldap.c:203: error: syntax error before '*' token pam_ldap.c:205: error: syntax error before '*' token pam_ldap.c:206: error: syntax error before '*' token pam_ldap.c:247: error: syntax error before '*' token pam_ldap.c:261: error: syntax error before '*' token pam_ldap.c:266: error: syntax error before '*' token pam_ldap.c:272: error: syntax error before '*' token pam_ldap.c:274: error: syntax error before '*' token pam_ldap.c:279: error: syntax error before '*' token pam_ldap.c:281: warning: "struct pam_conv" declared inside parameter list pam_ldap.c:281: warning: its scope is only this definition or declaration, which is probably not what you want pam_ldap.c:566: error: syntax error before '*' token pam_ldap.c: In function `_pam_ldap_cleanup_session': pam_ldap.c:568: error: `data' undeclared (first use in this function) pam_ldap.c:568: error: (Each undeclared identifier is reported only once pam_ldap.c:568: error: for each function it appears in.) pam_ldap.c: At top level: pam_ldap.c:591: error: syntax error before '*' token pam_ldap.c: In function `_cleanup_data': pam_ldap.c:593: error: `data' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:600: error: syntax error before '*' token pam_ldap.c: In function `_cleanup_authtok_data': pam_ldap.c:602: error: `data' undeclared (first use in this function) pam_ldap.c: In function `_alloc_config': pam_ldap.c:617: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:666: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_read_config': pam_ldap.c:771: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:773: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:800: error: `PAM_SERVICE_ERR' undeclared (first use in this function) pam_ldap.c: In function `_open_session': pam_ldap.c:1261: error: `PAM_SERVICE_ERR' undeclared (first use in this function) pam_ldap.c:1383: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:1388: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_connect_anonymously': pam_ldap.c:1530: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:1557: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:1587: error: `PAM_CRED_INSUFFICIENT' undeclared (first use in this function) pam_ldap.c: In function `_rebind_proc': pam_ldap.c:1643: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:1899: error: syntax error before '*' token pam_ldap.c: In function `_connect_as_user': pam_ldap.c:1914: error: `password' undeclared (first use in this function) pam_ldap.c:1915: error: `PAM_AUTH_ERR' undeclared (first use in this function) pam_ldap.c:1918: error: `session' undeclared (first use in this function) pam_ldap.c:1919: error: `PAM_SYSTEM_ERR' undeclared (first use in this function) pam_ldap.c:1923: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:1957: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:2032: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:2108: error: `PAM_SERVICE_ERR' undeclared (first use in this function) pam_ldap.c: In function `_get_integer_value': pam_ldap.c:2218: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:2223: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_get_long_integer_value': pam_ldap.c:2235: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:2240: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_get_string_value': pam_ldap.c:2281: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:2286: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:2290: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_get_string_values': pam_ldap.c:2306: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:2310: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:2347: error: syntax error before '*' token pam_ldap.c: In function `_service_ok': pam_ldap.c:2353: error: `session' undeclared (first use in this function) pam_ldap.c:2355: error: `PAM_PERM_DENIED' undeclared (first use in this function) pam_ldap.c:2358: warning: implicit declaration of function `pam_get_item' pam_ldap.c:2358: error: `pamh' undeclared (first use in this function) pam_ldap.c:2358: error: `PAM_SERVICE' undeclared (first use in this function) pam_ldap.c:2358: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:2359: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_host_ok': pam_ldap.c:2396: error: `PAM_PERM_DENIED' undeclared (first use in this function) pam_ldap.c:2402: error: `PAM_SYSTEM_ERR' undeclared (first use in this function) pam_ldap.c:2440: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_escape_string': pam_ldap.c:2521: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:2557: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_get_user_info': pam_ldap.c:2572: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:2627: error: `PAM_USER_UNKNOWN' undeclared (first use in this function) pam_ldap.c:2652: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:2668: error: `PAM_SERVICE_ERR' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:2739: error: syntax error before '*' token pam_ldap.c: In function `_pam_ldap_get_session': pam_ldap.c:2746: warning: implicit declaration of function `pam_get_data' pam_ldap.c:2746: error: `pamh' undeclared (first use in this function) pam_ldap.c:2746: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:2746: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:2756: error: `username' undeclared (first use in this function) pam_ldap.c:2761: error: `configFile' undeclared (first use in this function) pam_ldap.c:2777: error: `psession' undeclared (first use in this function) pam_ldap.c:2792: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:2817: warning: implicit declaration of function `pam_set_data' pam_ldap.c: In function `_session_reopen': pam_ldap.c:2848: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: In function `_get_password_policy': pam_ldap.c:2855: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:2904: error: syntax error before '*' token pam_ldap.c: In function `_do_authentication': pam_ldap.c:2908: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:2910: error: `session' undeclared (first use in this function) pam_ldap.c:2912: error: `user' undeclared (first use in this function) pam_ldap.c:2921: error: `pamh' undeclared (first use in this function) pam_ldap.c:2921: error: `password' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:2928: error: syntax error before '*' token pam_ldap.c: In function `_update_authtok': pam_ldap.c:2938: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:2958: error: `session' undeclared (first use in this function) pam_ldap.c:2960: error: `user' undeclared (first use in this function) pam_ldap.c:2981: error: `pamh' undeclared (first use in this function) pam_ldap.c:2981: error: `old_password' undeclared (first use in this function) pam_ldap.c:2989: error: `new_password' undeclared (first use in this function) pam_ldap.c:3126: error: `PAM_BUF_ERR' undeclared (first use in this function) pam_ldap.c:3157: error: `PAM_PERM_DENIED' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:3208: error: syntax error before '*' token pam_ldap.c: In function `_get_authtok': pam_ldap.c:3212: error: storage size of 'msg' isn't known pam_ldap.c:3217: error: `PAM_PROMPT_ECHO_OFF' undeclared (first use in this function) pam_ldap.c:3218: error: `first' undeclared (first use in this function) pam_ldap.c:3221: error: `pamh' undeclared (first use in this function) pam_ldap.c:3221: error: `PAM_CONV' undeclared (first use in this function) pam_ldap.c:3221: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3222: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:3224: error: dereferencing pointer to incomplete type pam_ldap.c:3226: error: dereferencing pointer to incomplete type pam_ldap.c:3235: error: `flags' undeclared (first use in this function) pam_ldap.c:3235: error: `PAM_DISALLOW_NULL_AUTHTOK' undeclared (first use in this function) pam_ldap.c:3235: error: invalid use of undefined type `struct pam_response' pam_ldap.c:3235: error: dereferencing pointer to incomplete type pam_ldap.c:3238: error: `PAM_AUTH_ERR' undeclared (first use in this function) pam_ldap.c:3241: error: invalid use of undefined type `struct pam_response' pam_ldap.c:3241: error: dereferencing pointer to incomplete type pam_ldap.c:3243: error: invalid use of undefined type `struct pam_response' pam_ldap.c:3243: error: dereferencing pointer to incomplete type pam_ldap.c:3247: error: `PAM_CONV_ERR' undeclared (first use in this function) pam_ldap.c:3251: warning: implicit declaration of function `pam_set_item' pam_ldap.c:3251: error: `PAM_AUTHTOK' undeclared (first use in this function) pam_ldap.c:3212: warning: unused variable `msg' pam_ldap.c: At top level: pam_ldap.c:3258: warning: "struct pam_conv" declared inside parameter list pam_ldap.c:3259: error: conflicting types for '_conv_sendmsg' pam_ldap.c:281: error: previous declaration of '_conv_sendmsg' was here pam_ldap.c:3259: error: conflicting types for '_conv_sendmsg' pam_ldap.c:281: error: previous declaration of '_conv_sendmsg' was here pam_ldap.c: In function `_conv_sendmsg': pam_ldap.c:3260: error: storage size of 'msg' isn't known pam_ldap.c:3264: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:3272: error: dereferencing pointer to incomplete type pam_ldap.c:3274: error: dereferencing pointer to incomplete type pam_ldap.c:3260: warning: unused variable `msg' pam_ldap.c: At top level: pam_ldap.c:3278: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_authenticate': pam_ldap.c:3289: error: `argc' undeclared (first use in this function) pam_ldap.c:3291: error: `argv' undeclared (first use in this function) pam_ldap.c:3309: warning: implicit declaration of function `pam_get_user' pam_ldap.c:3309: error: `pamh' undeclared (first use in this function) pam_ldap.c:3310: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:3317: error: `PAM_AUTHTOK' undeclared (first use in this function) pam_ldap.c:3317: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3323: error: `PAM_USER_UNKNOWN' undeclared (first use in this function) pam_ldap.c:3323: error: `PAM_IGNORE' undeclared (first use in this function) pam_ldap.c:3323: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:3333: error: `PAM_USER' undeclared (first use in this function) pam_ldap.c:3341: error: `flags' undeclared (first use in this function) pam_ldap.c:3345: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c: At top level: pam_ldap.c:3371: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_setcred': pam_ldap.c:3373: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:3377: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_open_session': pam_ldap.c:3387: error: `pamh' undeclared (first use in this function) pam_ldap.c:3387: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:3394: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_close_session': pam_ldap.c:3397: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c: At top level: pam_ldap.c:3401: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_chauthtok': pam_ldap.c:3403: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:3407: error: storage size of 'msg' isn't known pam_ldap.c:3419: error: `argc' undeclared (first use in this function) pam_ldap.c:3421: error: `argv' undeclared (first use in this function) pam_ldap.c:3441: error: `flags' undeclared (first use in this function) pam_ldap.c:3441: error: `PAM_SILENT' undeclared (first use in this function) pam_ldap.c:3444: error: `pamh' undeclared (first use in this function) pam_ldap.c:3444: error: `PAM_CONV' undeclared (first use in this function) pam_ldap.c:3444: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3453: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3462: error: `PAM_USER_UNKNOWN' undeclared (first use in this function) pam_ldap.c:3464: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3476: error: `PAM_IGNORE' undeclared (first use in this function) pam_ldap.c:3476: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:3482: error: `PAM_ERROR_MSG' undeclared (first use in this function) pam_ldap.c:3482: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3483: error: `PAM_PERM_DENIED' undeclared (first use in this function) pam_ldap.c:3486: error: `PAM_PRELIM_CHECK' undeclared (first use in this function) pam_ldap.c:3500: error: `PAM_OLDAUTHTOK' undeclared (first use in this function) pam_ldap.c:3501: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3510: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3516: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3537: error: `PAM_PROMPT_ECHO_OFF' undeclared (first use in this function) pam_ldap.c:3541: error: dereferencing pointer to incomplete type pam_ldap.c:3542: error: dereferencing pointer to incomplete type pam_ldap.c:3547: error: dereferencing pointer to incomplete type pam_ldap.c:3565: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3569: error: `PAM_AUTHTOK_RECOVER_ERR' undeclared (first use in this function) pam_ldap.c:3576: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3582: error: `PAM_MAXTRIES' undeclared (first use in this function) pam_ldap.c:3606: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3611: warning: implicit declaration of function `pam_strerror' pam_ldap.c:3611: warning: format argument is not a pointer (arg 3) pam_ldap.c:3621: error: `PAM_AUTHTOK' undeclared (first use in this function) pam_ldap.c:3621: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3647: error: dereferencing pointer to incomplete type pam_ldap.c:3648: error: dereferencing pointer to incomplete type pam_ldap.c:3653: error: dereferencing pointer to incomplete type pam_ldap.c:3697: error: dereferencing pointer to incomplete type pam_ldap.c:3698: error: dereferencing pointer to incomplete type pam_ldap.c:3702: error: dereferencing pointer to incomplete type pam_ldap.c:3715: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3730: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3736: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3761: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3782: error: `PAM_TEXT_INFO' undeclared (first use in this function) pam_ldap.c:3783: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3407: warning: unused variable `msg' pam_ldap.c: At top level: pam_ldap.c:3793: error: syntax error before '*' token pam_ldap.c: In function `pam_sm_acct_mgmt': pam_ldap.c:3806: error: `PAM_SUCCESS' undeclared (first use in this function) pam_ldap.c:3815: error: `argc' undeclared (first use in this function) pam_ldap.c:3817: error: `argv' undeclared (first use in this function) pam_ldap.c:3835: error: `flags' undeclared (first use in this function) pam_ldap.c:3835: error: `PAM_SILENT' undeclared (first use in this function) pam_ldap.c:3838: error: `pamh' undeclared (first use in this function) pam_ldap.c:3838: error: `PAM_CONV' undeclared (first use in this function) pam_ldap.c:3838: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3847: warning: dereferencing type-punned pointer will break strict-aliasing rules pam_ldap.c:3856: error: `PAM_USER_UNKNOWN' undeclared (first use in this function) pam_ldap.c:3869: error: `PAM_IGNORE' undeclared (first use in this function) pam_ldap.c:3869: error: `PAM_AUTHINFO_UNAVAIL' undeclared (first use in this function) pam_ldap.c:3885: error: `PAM_ACCT_EXPIRED' undeclared (first use in this function) pam_ldap.c:3934: error: `PAM_ERROR_MSG' undeclared (first use in this function) pam_ldap.c:3934: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3938: error: `PAM_NEW_AUTHTOK_REQD' undeclared (first use in this function) pam_ldap.c:3950: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3951: error: `PAM_PERM_DENIED' undeclared (first use in this function) pam_ldap.c:3957: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:3997: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:4015: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:4027: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:4037: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:4047: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c:4056: warning: passing arg 1 of `_conv_sendmsg' from incompatible pointer type pam_ldap.c: At top level: pam_ldap.c:281: warning: '_conv_sendmsg' declared `static' but never defined make: *** [pam_ldap.o] Error 1 --- end of compile error msgs --- -- bubuk

3 2

Re: [CentOS] Mgetty for out of band management - which modem?
by Brent L. Bates 05 Jun '07

05 Jun '07

Did 3Com buy USR again? Last I heard, 3Com got rid of USR and they were a separate company again. I just double checked. USR is still a separate company. Their home page is: http://www.usrobotics.com/ They have a number internal and external modems there. -- Brent L. Bates (UNIX Sys. Admin.) M.S. 912 Phone:(757) 865-1400, x204 NASA Langley Research Center FAX:(757) 865-8177 Hampton, Virginia 23681-0001 Email: B.L.BATES(a)larc.nasa.gov http://www.vigyan.com/~blbates/

1 0

CentOS-announce Digest, Vol 28, Issue 5
by centos-announce-request＠centos.org 05 Jun '07

05 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0386 Moderate CentOS 4 ia64 mutt - security update (Pasi Pirhonen) 2. CESA-2007:0386 Moderate CentOS 3 ia64 mutt - security update (Pasi Pirhonen) 3. CESA-2007:0386 Moderate CentOS 3 s390(x) mutt - security update (Pasi Pirhonen) 4. CESA-2007:0386 Moderate CentOS 4 s390(x) mutt - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Tue, 5 Jun 2007 02:13:05 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0386 Moderate CentOS 4 ia64 mutt - security update To: centos-announce(a)centos.org Message-ID: <20070604231305.GA22723(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0386 https://rhn.redhat.com/errata/RHSA-2007-0386.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/mutt-1.4.1-12.0.3.el4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

postfix help. im clueless
by Erick Perez 05 Jun '07

05 Jun '07

Hi, I have been given the task to check on a postfix server that presents the following error: Let's say you use your hotmail account and then send a message to one of my users. The postfix program running on the server responds: Jun 4 10:21:25 mail postfix/smtp[29744]: 553E01079AD: to=<email.elpanama(a)elpanama.com>, relay=localhost[127.0.0.1], delay=54253, status=deferred (host localhost[127.0.0.1] said: 451 Unable to complete command, DNS not available or timed out (in reply to MAIL FROM command)) first, why is giving me a timeout? and second, why in the response the to= field has the domain name? what things can i see in the main.cf? -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------

3 2

xen - 4 concurrent virtual DomU limitation - how to increae this? (centos 5 x86_64)
by Urs Rau 04 Jun '07

04 Jun '07

Is there a switch or config setting somewhere that would allow me to start up more than the default 4 xen DomU instances? I am finding that the CentOS 5 (x86_64) installation only allows me to start up 4 virtual machines at a time. (It is definetly not a lack of cpu resources, memory or disk space.) Any help or pointers, would be much appreciated. Regards, -- Urs Rau

3 4

monitor software does not find Belkin UPS
by dcw 04 Jun '07

04 Jun '07

I have upgraded to CentOS5 on our computers. I had been using Mandriva 2006. The problem I am having is that the networkupstools (nut-2.0.4.tar.gz) does not find the UPS device. However, when I had Mandriva 2006 on the same hardware it worked. The device manager on CentOS does show the UPS device. The settings I used in the ups.conf file are: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) The following libusb files are installed: libusb-0.1.12-5.1 libusb-devel-0.1.12-5.1 Using ./configure --with-user=ups the lines for libusb show: checking for libusb cflags... checking for libusb libs... -lusb I posted this problem to the mailing list for the nut software. The conclusion is that the nut software is setup correctly. I also downloaded and installed the latest version (nut-2.0.5.tar.gz) and got the same result. All UPSs are Belkin F6H375-USB. I have searched the internet and found no other solutions. Since the software works under Mandriva 2006, I would presume that there is a package that is installed by default on Mandriva that is not installed by default on CentOS or that a config file is setup differently. Any help will be appreciated, David

1 0

CentOS-announce Digest, Vol 28, Issue 4
by centos-announce-request＠centos.org 04 Jun '07

04 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0386 Moderate CentOS 3 i386 mutt - security update (Tru Huynh) 2. CESA-2007:0386 Moderate CentOS 3 x86_64 mutt - security update (Tru Huynh) 3. CESA-2007:0386 Moderate CentOS 4 i386 mutt - security update (Johnny Hughes) 4. CESA-2007:0386 Moderate CentOS 4 x86_64 mutt - security update (Johnny Hughes) 5. CESA-2007:0386 Moderate CentOS 5 x86_64 mutt - security update (Johnny Hughes) 6. CESA-2007:0386 Moderate CentOS 5 i386 mutt - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Jun 2007 11:31:21 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0386 Moderate CentOS 3 i386 mutt - security update To: centos-announce(a)centos.org Message-ID: <20070604093121.GA4044(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0386 mutt security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0386.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/mutt-1.4.1-5.el3.i386.rpm source: updates/SRPMS/mutt-1.4.1-5.el3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update mutt Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

data corruption on AMD AM2 systems with 4GB of RAM or more
by Feizhou 04 Jun '07

04 Jun '07

Anybody know if the fix for the incorrect kernel behaviour that leads to data corruption will be available for RHEL4/5 kernels?

5 16

rar incompatiblity from 4.4 to 4.5
by Mark Quitoriano 04 Jun '07

04 Jun '07

i just upgraded my centOS to 4.5 and i try to install rar and i get this problem, isn't apt should automatically install all deps? ---snip---- Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: rar: Depends: libc.so.6(GLIBC_2.4) but it is not installable E: Broken packages

2 2

General protection error
by Haakon Gjersvik Eriksen 04 Jun '07

04 Jun '07

G'morning, all Over the last few months I've had a few instances of log lines of the following type on a handful of servers: nscd[9301] general protection rip:2a9578dea0 rsp:405f1368 error:0 As far as I've been able to figure out, this is the kernel warning me that nscd has tried to write outside of its allocated memory. Since the current nscd is started at the exact same time as the log message, I suspect that the kernel killed the process and it was automatically restarted by our automatic host management system. This has happened to different processes than nscd, and the servers where I've seen it run CentOS 4.4 or 4.1, with kernel versions 2.6.9-42.0.2.ELsmp, 2.6.9-42.0.10.ELsmp or 2.6.9-11.106.unsupportedsmp. I've not been able to find much relevant regarding what can be done about this, but I suspect that the general answer is "this is a bug in the application". If someone knows of any condition where this is more likely to appear than others, or any other debugging hints, I'd be happy to know about it. -- Haakon Gjersvik Eriksen -- Basefarm AS

1 0

yum update failure, dependancy issues for yum
by Devraj Mukherjee 04 Jun '07

04 Jun '07

Hi everyone, My CentOS 4.4 machine refuses to yum update. Here is the output, any pointers as to what I can do? Thanks [root@monk ~]# yum update Setting up Update Process Setting up repositories atrpms 100% |=========================| 951 B 00:00 update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files primary.xml.gz 100% |=========================| 295 kB 00:02 ################################################## 1393/1393 primary.xml.gz 100% |=========================| 34 kB 00:00 ################################################## 127/127 Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for file to pack into transaction set. file-4.10-3.0.2.el4.i386. 100% |=========================| 9.8 kB 00:00 ---> Package file.i386 0:4.10-3.0.2.el4 set to be updated ---> Downloading header for up2date to pack into transaction set. up2date-4.5.5-6.el4.cento 100% |=========================| 45 kB 00:00 ---> Package up2date.i386 0:4.5.5-6.el4.centos set to be updated ---> Package yum-utils.noarch 0:0.5-2.el4.centos set to be updated --> Running transaction check --> Processing Dependency: yum < 2.5 for package: yum-utils --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package yum.noarch 0:2.4.3-3.el4.centos set to be updated --> Running transaction check --> Processing Dependency: yum >= 2.6.2 for package: yum-metadata-parser --> Finished Dependency Resolution Error: Missing Dependency: yum >= 2.6.2 is needed by package yum-metadata-parser -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

2 2

cups foomatic error centos 5....
by Tom Bishop 04 Jun '07

04 Jun '07

I am trying to setup a local printer that I have working in centos4.4 on centos 5, this is a server install no X. I was able to get the cups webpage up and it sees the printer I configured it up but when I try to print to it i get the following error: "/usr/lib/cups/filter/foomatic-rip failed", I've searched and searched but can't find anything that helps. I would like to try to install it outside of cups but it appears they only have a GUI to add a printer. Any suggestions/help would be appreciated. Thanks.

2 2

OT: Feedback Request: HP Laserjet MFD M3027x and Laserjet 2840 on Linux?
by Sanjay Arora 03 Jun '07

03 Jun '07

Hello all Sorry for posting my query here, but did not have any success in getting feedback from linuxprinting.org/ openprinting.org forums. Planning to buy a new colour MFD or a Mono MFD & a Colour printer, for small buisiness office use. Could someone give feedback on HP Laserjet MFD M3027x and Laserjet 2840? Do all functions provided by the printers work on Linux? Any kinks? Do Network Fax features of M3027x work on linux? Any problems in scanning & saving to disk or rather, is there any gui for scanning etc. & especially checking ink levels other maintainence tasks? I use Fedora 6 and CentOS 4/5. Any other model recommendations? With best regards. Sanjay

2 1

CentOS-announce Digest, Vol 28, Issue 3
by centos-announce-request＠centos.org 03 Jun '07

03 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0401 Critical CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 2 Jun 2007 23:39:13 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0401 Critical CentOS 4 s390(x) thunderbird - security update To: centos-announce(a)centos.org Message-ID: <20070602203913.GG4025(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0401 https://rhn.redhat.com/errata/RHSA-2007-0401.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/thunderbird-1.5.0.12-0.1.el4.centos.s390.rpm s390x: updates/s390x/RPMS/thunderbird-1.5.0.12-0.1.el4.centos.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

RE: [CentOS] Desperate to upgrade from RedHat 9 to CentOS 4.4
by Lanny Marcus 02 Jun '07

02 Jun '07

>Message: 70 >Date: 30 May 2007 11:19:56 +0100 >From: Andy Allen <andy.allen(a)virgin.net> >Subject: [CentOS] Desperate to upgrade from RedHat 9 to CentOS 4.4 >To: CentOS mailing list <centos(a)centos.org>, General Red Hat List > <redhat-list(a)redhat.com>, Evolution Mailing List > <evolution-list(a)gnome.org> >Message-ID: <1180520396.3019.43.camel(a)localhost.localdomain> >I'm desperately trying to upgrade from RedHat 9 to CentOS 4.4, but the >one thing that's really causing me problems is migrating from Evolution >1.2.2 (bundled with RedHat 9) to 2.0.2 (bundled with CentOS 4.4. Andy: I am using Evolution 2.0.2 on CentOS 4.4. When I upgrade to a newer release, I have *never* been able to get the Evolution Import routine to work for me. Importing from Evolution to Evolution has never seemed to work. I do it manually. I just read your post, several days after you posted. I have Custom mailboxes and I import everything, mail boxes, address book; one file at a time and I'm up and running in 10 or 15 minutes, with the newer version of Evolution. If you have not yet solved the problem, please post again and I will find my notes on this and try to help you. BTW, please do not cross post. Post in one mailing list and hopefully you will get an answer that works for you. If not, post somewhere else. Lanny in Colombia

1 0

Wine on CentOS5
by centos＠911networks.com 02 Jun '07

02 Jun '07

I am trying to run Excel 2000 with wine-0.9.37. I need excel for some graphics that look terrible in OO. If I run: $ wine excel.exe I get: wine: could not load L"c:\\windows\\system32\\excel.exe": Module not found If I run: $wine .wine/drive_c/Program\ Files/Microsoft\ Office/Office/excel.exe Nothing happen, only the wineserver shows up in the system monitor. I have googled around and can't find anything about it. Any suggestion? -- Thanks http://www.911networks.com When the network has to work

2 2

CentOS-announce Digest, Vol 28, Issue 2
by centos-announce-request＠centos.org 02 Jun '07

02 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0402 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) 2. CESA-2007:0402 Critical CentOS 4 ia64 seamonkey - security update (Pasi Pirhonen) 3. CESA-2007:0400 Critical CentOS 4 ia64 firefox - security update (Pasi Pirhonen) 4. CESA-2007:0401 Critical CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) 5. CESA-2007:0402 Critical CentOS 3 s390(x) seamonkey - security update (Pasi Pirhonen) 6. CESA-2007:0400 Critical CentOS 4 s390(x) firefox - security update (Pasi Pirhonen) 7. CESA-2007:0402 Critical CentOS 4 s390(x) seamonkey - security update (Pasi Pirhonen) 8. CESA-2007:0400 Critical CentOS 5 i386 firefox Update (Karanbir Singh) 9. CESA-2007:0400 Critical CentOS 5 x86_64 firefox Update (Karanbir Singh) 10. CESA-2007:0400 Critical CentOS 5 i386 devhelp Update (Karanbir Singh) 11. CESA-2007:0400 Critical CentOS 5 x86_64 devhelp Update (Karanbir Singh) 12. CESA-2007:0400 Critical CentOS 5 i386 yelp Update (Karanbir Singh) 13. CESA-2007:0400 Critical CentOS 5 x86_64 yelp Update (Karanbir Singh) 14. CESA-2007:0401 Critical CentOS 5 i386 thunderbird Update (Karanbir Singh) 15. CESA-2007:0401 Critical CentOS 5 x86_64 thunderbird Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Sat, 2 Jun 2007 03:25:43 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0402 Critical CentOS 3 ia64 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20070602002543.GA3396(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0402 https://rhn.redhat.com/errata/RHSA-2007-0402.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/seamonkey-chat-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-devel-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-dom-inspector-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-js-debugger-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-mail-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-devel-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-1.0.9-0.1.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-devel-1.0.9-0.1.el3.centos3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

kmod-xfs.i686 for 2.6.18-8.1.3.el5
by Dunc 02 Jun '07

02 Jun '07

Hey all Anyone know when there will be an XFS kmod available for 2.6.18-8.1.3.el5? Thanks Dunc

2 2

CentOS 5 LiveCD Planned?
by Mike McCarty 01 Jun '07

01 Jun '07

I'd like to know whether a LiveCD for CentOS 5 is planned. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that!

2 1

Very early PANIC during boot
by Alfred von Campe 01 Jun '07

01 Jun '07

I'm in the process of updating all my CentOS systems from 4.4 to 4.5. One of the systems is spewing out the following error during the reboot: INIT: version 2.85 booting INIT: PANIC: segmentation violation at 0x420! sleeping for 30 seconds This happens so early in the boot I have no idea what I can do to debug this. I suspect it is a hardware problem and not something caused by the "yum update", but I thought I'd mention it here in case anyone else has any ideas. Update: I originally sent this message out yesterday, but my email client used the wrong account so it didn't get posted to the list. I've since re-imaged this system (thank you Red Hat for Kickstart), but I am still curious what could have possibly caused this and any debugging techniques that can be used in this situation. On a vaguely related note, I also have pondered the following in the past; if you observe a system booting, you'll see all the "[OK]" and "[FAILED]" messages. Is there a log somewhere where you can check later on which services were started and which passed or failed? Thanks, Alfred

4 6

usb mouse dies centos 5
by Jerry Geis 01 Jun '07

01 Jun '07

Hi all, My USB mouse is dying on centos 5. Boots up fine, runs for a little while - 5 minutes perhaps then dies. All I see in the log is: <IRQ> [<ffffffff800b389d>] __report_bad_irq+0x30/0x7d [<ffffffff800b3ad0>] note_interrupt+0x1e6/0x227 [<ffffffff800b3005>] __do_IRQ+0xc7/0x105 [<ffffffff80011c19>] __do_softirq+0x5e/0xd5 [<ffffffff8006a195>] do_IRQ+0xe7/0xf5 [<ffffffff8005b649>] ret_from_intr+0x0/0xa <EOI> handlers: [<ffffffff801d213f>] (usb_hcd_irq+0x0/0x55) What package might I look at updating so my USB mouse stays online. Jerry

1 0

4.5 ALB Bonding Hang on Shutdown
by Ross S. W. Walker 01 Jun '07

01 Jun '07

Since I upgraded from 4.4 to 4.5 my system which has 2 sets of ALB bonded interfaces hangs on shutdown while doing an ifdown on these interfaces. Has anyone else seen this issue with 4.5 and bonding? Ross S. W. Walker Information Systems Manager Medallion Financial, Corp. 437 Madison Avenue 38th Floor New York, NY 10022 Tel: (212) 328-2165 Fax: (212) 328-2125 WWW: http://www.medallion.com ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.

2 4

business ssl certs for centos www and/or email servers
by AbbaComm.Net 01 Jun '07

01 Jun '07

Although I know the basics about getting and installing web and mail server ssl certs, I haven't had to "purchase" and do it "myself" for some time. i always had someone else dealing with it. I am wondering what you folks on the list are using on your centos web and mail servers :-) Are you making your own or are you purchasing them from godaddy, thawte, geotrust, verisign, others? What is the best and the least expensive implementation that most browsers and other clients are happy with without phone calls to admins or the NOC or other problems? Thanks for your feedback in advance. - rh -- Abba Communications Spokane, WA www.abbacomm.net

4 3

motherboard recommendation
by Mark Quitoriano 01 Jun '07

01 Jun '07

Hi, can you recommend me motherboard that centos 4.x supports? the proc is inte core 2 duo 3.2GHZ. Thanks!

7 16

XFCE-4.4, Samba shares, Beryl
by Niki Kovacs 01 Jun '07

01 Jun '07

Hi, I have CentOS 5 with the XFCE-4.4 window manager installed. (BTW, I've tried many XFCE-centered distros before, and CentOS offers by far the cleanest implementation). Two questions for that. 1) I've seen various HOWTO's about how to display Samba shares with the Thunar file manager. Did anyone manage to do this with CentOS? 2) Is there some HOWTO about configuring that nice 3D-desktop? I have an older NVidia card, a GeForce2. I wonder if this is enough. Cheers, Niki -- Dyslexics have more fnu.

2 1

Kde rpms for CentOS 5?
by Olaf Mueller 01 Jun '07

01 Jun '07

Hello, Does anybody knows where to get a current version of kde (rpms, 3.5.6 or better 3.5.7) for CentOS 5? I want to change my desktop system from Fedora Core 6 with kde 3.5.6 installed on to CentOS 5 and I would like to use my ~/.kde directory without any further changes. Thank you! regards Olaf

3 3

CentOS-announce Digest, Vol 28, Issue 1
by centos-announce-request＠centos.org 01 Jun '07

01 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0400 Critical CentOS 4 i386 firefox - security update (Johnny Hughes) 2. CESA-2007:0400 Critical CentOS 4 x86_64 firefox - security update (Johnny Hughes) 3. CESA-2007:0401 Critical CentOS 4 x86_64 thunderbird - security update (Johnny Hughes) 4. CESA-2007:0401 Critical CentOS 4 i386 thunderbird - security update (Johnny Hughes) 5. CESA-2007:0402 Critical CentOS 4 x86_64 seamonkey - security update (Johnny Hughes) 6. CESA-2007:0402 Critical CentOS 4 i386 seamonkey - security update (Johnny Hughes) 7. CESA-2007:0402 Critical CentOS 3 i386 seamonkey - security update (Tru Huynh) 8. CESA-2007:0402 Critical CentOS 3 x86_64 seamonkey - security update (Tru Huynh) 9. CESA-2007:0400 Critical CentOS 3 i386 firefox - security update (CENTOSPLUS only) (Tru Huynh) 10. CESA-2007:0400 Critical CentOS 3 x86_64 firefox - security update (CENTOSPLUS only) (Tru Huynh) 11. CESA-2007:0402-01: Critical CentOS 2 i386 seamonkey security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 31 May 2007 16:22:44 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:0400 Critical CentOS 4 i386 firefox - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1180646564.22871.143.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0400 https://rhn.redhat.com/errata/RHSA-2007-0400.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: firefox-1.5.0.12-0.1.el4.centos.i386.rpm src: firefox-1.5.0.12-0.1.el4.centos.src.rpm

1 0

xfs and yum update
by Dmitry Melekhov 01 Jun '07

01 Jun '07

Hello! Could you tell me why kernel-module-xfs is not updated when I run yum update, so I have to manually install module when kernel is updated. Is this my fault or not?

2 1

USB phone -- Help
by Indunil Jayasooriya 01 Jun '07

01 Jun '07

Hi, I attached a mobile phone (its name I-MATE SMART PHONE) to a box running CentOS 5 by using a usb cable which came with that phone. Now, it shows /dev/ttyUSB0 Now I want to send a sms to my friends. I installed gammu. Pls see below for installed rpm. [root@mailgw ~]# rpm -qa |grep gammu gammu-1.11.0-1.el5.rf here's my /etc/gammurc file. [gammu] port = /dev/ttyUSB0 ;model = 6110 connection = dlr3 ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 ;rsslevel = teststable ;usephonedb = yes [gammu1] port = /dev/ttyUSB1 ;model = 6110 connection = dlr3 ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 I tried to send an SMS to my phone. So I issued the below command. [root@mailgw ~]# echo hello | gammu --sendsms TEXT 0714857135 Error setting device DTR or RTS. Then, it gave the above error. How can solve this. or is there another better pkg for it? -- Thank you Indunil Jayasooriya

1 0

gmime-2.1.19 and mime decoding
by Gregory P. Ennis 01 Jun '07

01 Jun '07

Everyone, Please forgive me if this is the wrong place to ask this question, but would sure appreciate some direction if this list is the wrong place. Looks like Fedora 5 and 6 have gmime-2.1.19 as part of the distribution, but it is not present within CentOS 5 or with the extra repositories I would like to use some of the tools in this package to decode some mime e-mail attachments on a CentOS 5 system. If you can help me find gmime-2.1.19 for CentOS 5 or other ways to decode mime attachments I would appreciate your help. Thanks, Greg Ennis

2 2

Robert Alan Soloway Arrested
by Mike McCarty 01 Jun '07

01 Jun '07

Hurray! Hopefully, he'll get put away for a while. Charged with SPAMming, money laundering, fraud, etc. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that!

2 1

centos 5 usb mouse failures
by Jerry Geis 01 Jun '07

01 Jun '07

I have a box that ran perfectly under 4.4. gigabyte motherboard, AM2 4200+ systems. 1 GIG RAM. I installed Centos 5 on the same box. I now see the log entries below and my USB mouse stops working. What to do? Jerry Call Trace: <IRQ> [<ffffffff800b389d>] __report_bad_irq+0x30/0x7d [<ffffffff800b3ad0>] note_interrupt+0x1e6/0x227 [<ffffffff800b3005>] __do_IRQ+0xc7/0x105 [<ffffffff80011c19>] __do_softirq+0x5e/0xd5 [<ffffffff8006a195>] do_IRQ+0xe7/0xf5 [<ffffffff8005b649>] ret_from_intr+0x0/0xa <EOI> handlers: [<ffffffff801d213f>] (usb_hcd_irq+0x0/0x55) Disabling IRQ #209

1 0

PPS Kit - Nanosecond timekeeping patches?
by Michael St. Laurent 01 Jun '07

01 Jun '07

Can anyone comment on the easiest way to get the PPS Kit kernel patch to work on a CentOS-5 system? I'd rather not use a plain vanilla kernel. http://www.kernel.org/pub/linux/daemons/ntp/PPS/

1 0

SCSI device not detected after 4.5 update
by Adam Huffman 31 May '07

31 May '07

After updating to Centos 4.5, I found that one of the LUNs on an external SCSI array wasn't being detected. If I add the device manually after boot echo "scsi add-single-device 0 0 1 1" > /proc/scsi/scsi it is detected. I can then use the LVM tools to activate it and then mount the LV on the device. It doesn't seem to be kernel related as I rebooted into a 4.4 kernel and the same thing happened. There's no error message I can see at boot, it just doesn't see the device. It's using a QLogic HBA but with the upstream module, not the out-of-tree QLogic one. It worked fine under 4.4. I suspect changes to dmsetup and/or multipath. Has anyone else seen something similar? Adam

2 2

redhat / whitebox
by ann kok 31 May '07

31 May '07

Hi all Can you tell me what is the different between fedora / redhat enterprise / centos and whitebox? Thank you ____________________________________________________________________________________ 8:00? 8:25? 8:40? Find a flick in no time with the Yahoo! Search movie showtime shortcut. http://tools.search.yahoo.com/shortcuts/#news

6 6

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss