- Discuss - lists.centos.org

mod_perl and httpd2
by Peter Serwe 09 Feb '07

09 Feb '07

I've got httpd and mod_perl installed, but I seem to have an application that requires part of mod_perl that doesn't seem to be properly installed into perl, notably, the 'Apache' portion. To 'fix' this, cpan would like to install either mod_perl-1.29, or alternatively to install mod_perl-2.0.2. 1.29 doesn't seem smart, and 2.0.2 absolutely will not install over the top of 1.99-16. I've looked for a package using: yum list available | grep -i perl yum list available | grep -i apache And I don't get anything decent in terms of output. For repositories, I've got CentOS-Base, CentOS-Media, kbsingh-CentOS-Extras, rpmforge. # rpm -qa | grep httpd httpd-2.0.52-28.ent.centos4 httpd-suexec-2.0.52-28.ent.centos4 httpd-manual-2.0.52-28.ent.centos4 httpd-devel-2.0.52-28.ent.centos4 # rpm -qa | grep perl perl-HTML-Tagset-3.03-30 perl-DBI-1.40-8 perl-XML-Dumper-0.71-2 perl-5.8.5-36.RHEL4 perl-URI-1.30-4 perl-HTML-Parser-3.35-6 perl-XML-Parser-2.34-5 perl-Parse-Yapp-1.05-32 perl-XML-Encoding-1.01-26 perl-libxml-enno-1.02-31 perl-libxml-perl-0.07-30 mod_perl-1.99_16-4.centos4 mod_perl-devel-1.99_16-4.centos4 perl-Digest-SHA1-2.07-5 perl-Digest-HMAC-1.01-13 perl-CGI-Simple-0.077-5.el4.kb perl-Filter-1.30-6 newt-perl-1.08-7 perl-libwww-perl-5.79-5 perl-DateManip-5.42a-3 perl-DBD-MySQL-2.9004-3.1 perl-Net-DNS-0.48-1 perl-Apache-Session-1.6-1 # The behavior I'm experiencing that has me suspecting my mod_perl installation is that when I type I get this 'Can't locate blah blah blah blah' message. # perl use Apache2::Const; Can't locate Apache2/Const.pm in @INC (@INC contains: /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at - line 1. BEGIN failed--compilation aborted at - line 1. Where do I begin to fix this? Peter -- Peter Serwe <peter at infostreet dot com> http://www.infostreet.com "The only true sports are bullfighting, mountain climbing and auto racing." -Earnest Hemingway "Because everything else requires only one ball." -Unknown "Do you wanna go fast or suck?" -Mike Kojima "There are two things no man will admit he cannot do well: drive and make love." -Sir Stirling Moss

3 2

Is anybody else dealing with Security Metrics?
by John Hinton 08 Feb '07

08 Feb '07

Seems that some of the credit card processors demand the use of Security Metrics to test their web hosting for meeting a fairly good security standard. First, it doesn't matter if they do online credit card processing or not, just credit card processing period. This makes some sense, as someone could hack in a form pretending to ask for this information... so there is at least some risk.. and we all no credit card companies ultimately want to achieve 0 risk. ;) Anyway, the frustration is this and early on their reports even talked about it. Redhat doesn't follow the normal numbering system for a lot of their security updates for various packages. PHP is a great example of the time. Security Metrics says I must be running 5.1 due to exploits in earlier versions due to CANXXXX whereas Redhat has clearly addressed the issue, sent out a patch and generally we have it installed 2 to 6 months before SM starts a failing process. ---- The real question ---- Basically, I was wondering if there were many of you 'jumping through these same hoops'? If there are, perhaps we as a group could do something to get them to check for CentOS and then look for RHEL versions in hopes of ending these hassles. ---- end real question ---- I have found that by contacting SM, they will make a correction to a test once they know what you are running, but this seems to come up with each and every test. And the testing is done by domain, not by server, so you have to deal with each domain tested with the exact same crap.. which amounts to jumping through a hoop. Also, I've come to realize that some of what they ask that you do, equates to having your locked car in the driveway with the keys in your pocket.. this fails... But, if you put those keys in a different locked car beside it in the driveway and put the keys to that car in your pocket, it passes. Very sad...... And never once have they considered talking about the very basics like a good password policy. :( One other thing that bothers me about them is they 'sell appliances'. So, if your server/host can't pass or doesn't want to deal with it, we can 'sell' them something, making more money which to me seems like a conflict of interest for someone operating under the guise of security.

3 2

New Bind Update
by John Hinton 08 Feb '07

08 Feb '07

I was wondering if the new bind update is going smoothly for those who have done it? I've been a little hesitant to run it yet as the last time forced a bit of time fixing things. I'm trying to plan if I need to have some hours available for this or if it is like most of the time.. just do it and everything's ok. Best, John Hinton

7 7

CentOS-announce Digest, Vol 24, Issue 4
by centos-announce-request＠centos.org 08 Feb '07

08 Feb '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0064 Moderate CentOS 3 i386 postgresql - security update (Tru Huynh) 2. CESA-2007:0064 Moderate CentOS 3 x86_64 postgresql - security update (Tru Huynh) 3. CESA-2007:0044 Moderate CentOS 3 ia64 bind - security update (Pasi Pirhonen) 4. CESA-2007:0064 Moderate CentOS 3 ia64 postgresql - security update (Pasi Pirhonen) 5. CESA-2007:0044 Moderate CentOS 4 ia64 bind - security update (Pasi Pirhonen) 6. CESA-2007:0064 Moderate CentOS 4 ia64 postgresql - security update (Pasi Pirhonen) 7. CESA-2007:0044 Moderate CentOS 3 s390(x) bind - security update (Pasi Pirhonen) 8. CESA-2007:0044 Moderate CentOS 4 s390(x) bind - security update (Pasi Pirhonen) 9. CESA-2007:0064 Moderate CentOS 3 s390(x) postgresql - security update (Pasi Pirhonen) 10. CESA-2007:0064 Moderate CentOS 4 s390(x) postgresql - security update (Pasi Pirhonen) 11. CESA-2007:0064 Moderate CentOS 4 x86_64 postgresql - security update (Johnny Hughes) 12. CESA-2007:0064 Moderate CentOS 4 i386 postgresql - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 8 Feb 2007 00:16:48 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0064 Moderate CentOS 3 i386 postgresql - security update To: centos-announce(a)centos.org Message-ID: <20070207231648.GB13796(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0064 postgresql security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0064.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/rh-postgresql-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-contrib-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-devel-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-docs-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-jdbc-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-libs-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-pl-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-python-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-server-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-tcl-7.3.18-1.i386.rpm updates/i386/RPMS/rh-postgresql-test-7.3.18-1.i386.rpm source: updates/SRPMS/rh-postgresql-7.3.18-1.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update postgresql\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

Re: tzdata - extra info.
by Steve Campbell 08 Feb '07

08 Feb '07

>> >> This was mostly a question about why yum provided a tzdata that was for a >> 2006a rpm instead of the 2006g or later when I did the yum. >> >> Thanks Still replying without digest turned off--- The yum update provided the 2006a-1 version of the tzdata file, and this apparently doesn't have the updates for the EST5EDT and America/New_York zoneinfo files. This occurred even after updating from Tao to CentOS. So, where is this fasttrack stuff, as I don't see it anywhere in my conf files. I also don't seem to be able to enable anything in the yum conf.d directory. These machines were almost all updated from Tao. Really sorry for the noise here. But thanks for the help provided. Steve Campbell campbell(a)cnpapers.com Charleston Newspapers

3 2

LDAP password
by Mário Gamito 08 Feb '07

08 Feb '07

Hi, I'm trying to access LDAP, but i don't know the password that is set by default. I'm running CentOS 4.4 Can someone help me, please ? Warm regards, Mário Gamito

2 1

Re: [CentOS] Problems with new kernels
by Jeff Stacey 08 Feb '07

08 Feb '07

On Thu, 2007-02-01 at 13:45 +0100, Sebastian Schubert wrote: > Hi there, > > we have the same problem here on IBM x305 (all other servers run > without problems). > Logging in throug ssh results in an "key exchange blah blah" failure. > Did anyone else notice this behaviour ? > > On Thu, 2007-02-01 at 07:05 -0500, Thomas Dukes wrote: > > Hello, > > > > I have been having problems using kernels since 2.6.9-34.0.2. After > > updating to a new kernel, my system runs, I'm guessing, 6 - 8 hours fine, > > then becomes unresponsive. For example, I installed the latest kernel the > > other evening, reboot for the changes and by morning, the system appears to > > be locked up. Typing 'yum update' takes about 10 minutes to execute. > > > > Not sure whats going on here but I'm stuck using 2.6.9-34.0.2. This is a > > centos 4.4 system on an IBM NetVista, 2.53 Ghz, 1GB RAM. I have noticed > > when there is a kernel update, it downloads the huge memeory and smp files. > > > > TIA > > > > Eddie > > -- > "In god we trust, the Rest we Monitor" > Sebastian Schubert - RHCE > Stadtsparkasse Munich > Network and IT Security > -------------------------- > basti-lists(a)sskm.de > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos We discovered that some IBM Netvistas (and other models) have a buggy APIC implimentation which seems to have problems with the APIC updates in recent kernel releases. Boot your system with the 'noapic' flag. It only seems to affect machines with IDE drives, if you have SATA, SCSI or FC drives then you are fine. -- Jeff Stacey UNIX Administrator James Richardson International

1 0

Slow clock on CentOS 4.4 in a VMware VM
by Alfred von Campe 08 Feb '07

08 Feb '07

I'm running a CentOS 4.4 VM on a Windows XP host with VMware Server, and have the problem that my clock runs too slow (it happens in VMware Workstation as well). It loses between 30 and 45 seconds every minute! This is a known problem and can be fixed by adding "nosmp noapic nolapic" to the boot command according to VMware tech note ID 1420. However, despite adding these options as well as some others (acpi=off pci=noacpi clock=pit) and turning off a bunch of daemons (cpuspeed, irqbalance, etc.) I still have a slow clock. Here are the daemons that are still enabled: anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off autofs 0:off 1:off 2:off 3:on 4:on 5:on 6:off crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off cups-config-daemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off denyhosts 0:off 1:off 2:on 3:on 4:on 5:on 6:off gpm 0:off 1:off 2:on 3:on 4:on 5:on 6:off haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off kudzu 0:off 1:off 2:off 3:on 4:on 5:on 6:off mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off network 0:off 1:off 2:on 3:on 4:on 5:on 6:off ntpd 0:off 1:off 2:off 3:on 4:off 5:on 6:off portmap 0:off 1:off 2:on 3:on 4:on 5:on 6:off readahead 0:off 1:off 2:off 3:off 4:off 5:on 6:off readahead_early 0:off 1:off 2:off 3:off 4:off 5:on 6:off sendmail 0:off 1:off 2:on 3:on 4:on 5:on 6:off sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off syslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off vmware-tools 0:off 1:off 2:on 3:on 4:off 5:on 6:off winbind 0:off 1:off 2:off 3:off 4:on 5:off 6:off xfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off xinetd 0:off 1:off 2:off 3:on 4:on 5:on 6:off Has anyone else come across this problem and if so, did you find a way to fix it? This is the last issue that is preventing me from distributing this VM to users. Thanks, Alfred

4 5

libX11-devel
by CentOS List 08 Feb '07

08 Feb '07

Hi, What package provide libX11-devel ? Regards, Nic

2 1

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Thanks. I did it. [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod --with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL this time it worked. now it shows new modules. pls see below. [root@gateway boot]# gunzip -cd initrd-2.6.9-42.0.8.EL.img |cpio -t . etc etc/udev etc/udev/udev.conf init lib lib/libata.ko lib/jbd.ko lib/ext3.ko lib/sd_mod.ko lib/scsi_mod.ko lib/ata_piix.ko proc loopfs bin bin/udevstart bin/insmod bin/udev bin/hotplug bin/nash bin/modprobe sbin dev dev/console dev/null dev/tty1 dev/systty dev/tty2 dev/ram dev/tty3 dev/tty4 sysroot sys 2147 blocks then I did the below steps. [root@gateway etc]# cd /boot/ [root@gateway boot]# cp initrd-2.6.9-42.0.8.EL.img initrd-2.6.9-42.0.8.EL.img.8feb2007 [root@gateway boot]# cd [root@gateway ~]# cp initrd-2.6.9-42.0.8.EL.img /boot/ cp: overwrite `/boot/initrd-2.6.9-42.0.8.EL.img'? y Now it has newly rebiult /boot/initrd-2.6.9-42.0.8.EL.img. Now I only need to restart the Server. To do that, It takes some time as users are getting emails . After the reboot, I will let you know. THNAK YOU VERY MUCH. On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > Indunil Jayasooriya wrote: > > i removed .ko from all and then gave the below error. > > > > [root@gateway etc]# cd /boot/ > > > > [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod > > with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img > > 2.6.9-42.0.8.EL > > usage: mkinitrd [--version] [-v] [-f] [--preload <module>] > > [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules] > > [--with=<module>] [--image-version] [--fstab=<fstab>] > [--nocompress] > > [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version> > > > > (ex: mkinitrd /boot/initrd-2.2.5-15.img 2.2.5-15) > > > > I think path is not set properly. > > No. You missed the '--' in with=ata_piix > -- Thank you Indunil Jayasooriya

1 0

Beagle on CentOS 4.4
by Timothy Kesten 08 Feb '07

08 Feb '07

Hi Folks, is there someone who has desktop-search-engine Beagle installed on CentOS 4.4? If so - can you give me some hints (links, howtos)? Thx Timothy

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

i removed .ko from all and then gave the below error. [root@gateway etc]# cd /boot/ [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL usage: mkinitrd [--version] [-v] [-f] [--preload <module>] [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules] [--with=<module>] [--image-version] [--fstab=<fstab>] [--nocompress] [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version> (ex: mkinitrd /boot/initrd-2.2.5-15.img 2.2.5-15) I think path is not set properly. On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > Indunil Jayasooriya wrote: > > On 2/8/07, *Feizhou* <feizhou(a)graffiti.net > > <mailto:feizhou@graffiti.net>> wrote: > > > > You are missing > > > > lib/sd_mod.ko > > lib/scsi_mod.ko > > lib/ata_piix.ko > > lib/libata.ko > > > > Try: mkinitrd --with=sd_mod.ko --with=scsi_mod.ko --with=ata_piix.ko > > --with=libata.ko /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL > > > > > > > > i tried it . i did the below . I did the below , First I changed to > > /boot directory. > > > > [root@gateway ~]# cd /boot/ > > > > [root@gateway boot]# mkinitrd --with=sd_mod.ko --with=scsi_mod.ko > > --with=ata_piix.ko --with= libata.ko /root/initrd-2.6.9-42.0.8.EL.img > > 2.6.9-42.0.8.EL > > > > it says the below > > > > No module sd_mod.ko found for kernel 2.6.9-42.0.8.EL, aborting. > > oops, sorry, chop the '.ko' from all the module names. > -- Thank you Indunil Jayasooriya

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

I have already set it. pls see below title CentOS (2.6.9-42.0.8.EL) root (hd0,0) kernel /vmlinuz-2.6.9-42.0.8.EL ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.9-42.0.8.EL.img On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > You can set your grub.conf back to the label /. > -- Thank you Indunil Jayasooriya

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Hi , Thanks for your quick responce. How to build a new initrd ? On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > > > last kernel contains more than the new kernel . > > Actually, the latest kernel is missing libata and maybe them scsi modules. > > > > > one is below > > lib/scsi_mod.ko > > > > that is scsi. Is is the one going with sata? > > You need libata, sd_mod too I guess. > > > > > how to solve thsi issuse? > > > > futher help needed. > > You need to build a new initrd. Hang on. > > > > > > > > > On 2/8/07, *Feizhou* <feizhou(a)graffiti.net > > <mailto:feizhou@graffiti.net>> wrote: > > > > Indunil Jayasooriya wrote: > > > > > > > > > eh? > > > > > > Is it sata? Maybe the sata driver is missing in your initrd > > image? > > > > > > > > > > > > Yeah, It is sata, Hpw to get to know wherether sata drivers are > > miinig > > > or not? > > > > > > iamge is below > > > > > > initrd-2.6.9-42.0.8.EL.img > > > > > > It is binary . > > > > > > futhernhelp is needed. > > > > It is a gzipped cpio image. > > > > Run 'gunzip -cd initrd-2.6.9-42.0.8.EL.img |cpio -t' to find out > what is > > in it. > > > > > > > > > > -- > > Thank you > > Indunil Jayasooriya > > -- Thank you Indunil Jayasooriya

1 0

kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Hi , I am ruuning Senmail with MailScanner on CentOS 4.4. It has updated to kernel 2.6.9-42.0.8.EL from its past kernel 2.6.9-42.0.3.EL. Now the Server can not boot up and gives the below error. mkrootdev: label / not found Mounting root filesystem mount: error 2 mouting ext3 switchroot: mount failed: 22 Kernel panic - not syncing: Attempted to kill init! But I can boot up from its last kernel 2.6.9-42.0.3.EL. I have booted it up from that kernel. But I wnat to rectify that new kernel error in order to boot from that kernel. Help needed. -- Thank you Indunil Jayasooriya -- Thank you Indunil Jayasooriya

3 4

USB-HDD cannnot connect automatically
by n.uryu 08 Feb '07

08 Feb '07

Hi all, I got a USB-HDD, but it doesn't looked like connect and cannot mount it just after PC boot. But insert and remove a usb cable from PC, it connect (with hotplug?) Is there any good how-to's for getting a usb-HDD to auto connect when It is booted the computer? lsmod is following: [lsmod of just after boot] Module Size Used by Not tainted parport_pc 19076 1 (autoclean) lp 9028 0 (autoclean) parport 37088 1 (autoclean) [parport_pc lp] autofs 13364 0 (autoclean) (unused) e1000 71712 1 floppy 58160 0 (autoclean) microcode 4724 0 (autoclean) keybdev 2976 0 (unused) mousedev 5524 0 (unused) hid 22212 0 (unused) input 5888 0 [keybdev mousedev hid] ehci-hcd 20104 0 (unused) usb-uhci 26412 0 (unused) usbcore 79392 1 [hid ehci-hcd usb-uhci] ext3 91592 9 jbd 52336 9 [ext3] [lsmod of insert and remove a usb cable] Module Size Used by Not tainted sd_mod 13776 2 (autoclean) usb-storage 74624 1 scsi_mod 108968 2 [sd_mod usb-storage] parport_pc 19076 1 (autoclean) lp 9028 0 (autoclean) parport 37088 1 (autoclean) [parport_pc lp] autofs 13364 0 (autoclean) (unused) e1000 71712 1 floppy 58160 0 (autoclean) microcode 4724 0 (autoclean) keybdev 2976 0 (unused) mousedev 5524 0 (unused) hid 22212 0 (unused) input 5888 0 [keybdev mousedev hid] ehci-hcd 20104 0 (unused) usb-uhci 26412 0 (unused) usbcore 79392 1 [usb-storage hid ehci-hcd usb-uhci] ext3 91592 10 jbd 52336 10 [ext3] Enviroment is following: [Enviroment] - Computer : FM V ESPRIMO C5200 (Fujitsu) - USB-HDD : I-O DATA USB-HDD - OS : CentOS version.3 If need to other information about problem solving, I will post. -- Regards Naoaki Uryu

1 0

Problems loading CentOS 4.4 on ASUS M2N-MX mobo
by Ed Burgstaler 08 Feb '07

08 Feb '07

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install, however, upon the restart after the install, the server then completely locks up. I can only assume it is at the point of loading the video driver although I really don't know what CentOS loads after the "acivating local loopback" section, because that is where it freezes on the screen. I'm thinking that the install to the SATA drive went well since it boots from the drive though it doesn't exactly boot completely. I have tried reinstalling several times already with the same negative results. Would appreciate any help that someone could offer in getting this working with this new MB. Here are the specs of the MB: -Key Specifications: NC-AS-M2N-MX Form Factor: uATX, 9.6" x 8.8" CPU - Support AMD Socket AM2 Athlon 64 X2 / Athlon 64 FX / Athlon 64/ Sempron Chipset - NVIDIA nForce430/GeForce6100 Front Side Bus - 2000 / 1600 MT/s Memory - Dual channel memory architecture - 4 x 240-pin DIMM, support max. 4GB DDR2 800/667/533 ECC and non-ECC,un-buffered memory VGA - Integrated GeForce 6100 GPU - High Definition Video Processing with max. resolutions to 1920 x 1440 Expansion Slots - 1 x PCI Express x16 - 1 x PCI Express x1 - 2 x PCI Storage/RAID - NVIDIA MCP61P - 1 x UltraDMA 133/100/66/33 - *4 x Serial ATA 3Gb/s with RAID 0, RAID 1, RAID 0+1, RAID 5 & JBOD NVIDIA MediaShield? RAID 0, 1, 0+1, 5 and JBOD span cross Serial ATA drives LAN - NVIDIA MCP61P built-in Gigabit MAC with external Attansic PHY Audio - ADI AD1986A High Difinition Audio 5.1channel CODEC - Support Jack-Sensing and S/PDIF out interface USB - 10 USB2.0/1.1 ports Manageability - WfM 2.0, DMI 2.0, WOL by PME, WOR, PXE, Chassis Intrusion BIOS - 4Mb Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3, ACPI 2.0 Overclocking Features - SFS (Stepless Frequency Selection) from 200MHz to 230MHz at 1MHz - increment - Adjustable Voltage : - *core: @ 0.025V stepping - *chipset: 2- stepping - *ddr: 4- stepping - Overclocking Protection: - ASUS C.P.R.(CPU Parameter Recall) Special Features - ASUS Q-Fan - ASUS My Logo 2 - ASUS CrashFreeBIOS2 - ASUS EZ Flash 2 Back Panel I/O Ports - 4 x USB 2.0 ports - 1 x RJ45 - 1 x COM1 - 1 x PS/2 Mouse - 1 x 5.1 channel Audio I/O - 1 x PS/2 Keyboard Internal I/O Connectors - 3 x USB 2.0 connector supports additional 4 USB 2.0 ports - 1 x S/PDIF output connector - High Definition Front panel audio connector - 4-pin CPU Fan / 2*Chassis Fan connectors - Chassis Intrusion connector - CD audio-in connector - 24-pin ATX power connector - 4-pin ATX 12V Power connector Accessories - 1 x Serial ATA cables - 1 x FDD cable - 1 x SATA power cable - 1 x I/O Shield - 1 x UltraDMA 133/100/66 cable - User's manual - 1 x COM1 - 1 x PS/2 Mouse - 1 x 5.1 channel Audio I/O - 1 x PS/2 Keyboard Internal I/O Connectors - 3 x USB 2.0 connector supports additional 4 USB 2.0 ports - 1 x S/PDIF output connector - High Definition Front panel audio connector - 4-pin CPU Fan / 2*Chassis Fan connectors - Chassis Intrusion connector - CD audio-in connector - 24-pin ATX power connector - 4-pin ATX 12V Power connector Accessories - 1 x Serial ATA cables - 1 x FDD cable - 1 x SATA power cable - 1 x I/O Shield - 1 x UltraDMA 133/100/66 cable - User's manual

5 4

RE: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction
by Mark Hull-Richter 08 Feb '07

08 Feb '07

None of that worked. When I edited out the HWADDR lines, I got this instead: Feb 7 06:36:34 sparenode1 network: Setting network parameters: succeeded Feb 7 06:36:34 sparenode1 network: Bringing up loopback interface: succeeded Feb 7 06:36:34 sparenode1 ifup: e1000 device eth0 does not seem to be present, delaying initialization. Feb 7 06:36:34 sparenode1 network: Bringing up interface eth0: failed Feb 7 06:36:34 sparenode1 ifup: e1000 device eth1 does not seem to be present, delaying initialization. Feb 7 06:36:34 sparenode1 network: Bringing up interface eth1: failed Hwconf did not change significantly when I ran kudzu, so I have no idea what's going on here. Again, this works exactly as is on 32-bit builds. It only fails on the 64 bit build. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Radu Radutiu Sent: Wednesday, February 07, 2007 5:47 AM To: CentOS mailing list Subject: Re: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction Editing out HWADDR should fix your problem. Another possible solution is to check that the value in the HWADDR line in /etc/sysconfig/network-scripts/ifcfg-ethX is the same as listed in the /etc/sysconfig/hwconf for the corresponding network interface. Also make sure that the files /etc/sysconfig/networking/devices/ifcfg-ethX and /etc/sysconfig/network-scripts/ifcfg-eth0 are hard links to the same file. You can regenerate the content of the /etc/sysconfig/hwconf by removing it and running kudzu again.

2 1

Support of Marvel Yukon Gigabit Ethernet
by devel 08 Feb '07

08 Feb '07

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

4 3

Named Troubles
by Matt 07 Feb '07

07 Feb '07

I did a CentOS 4.4 fresh server install. Using it to run Squid. Named is also running but I get this error. [root@sj ~]# /etc/init.d/named status rndc: connection to remote host closed This may indicate that the remote server is using an older version of the command protocol, this host is not authorized to connect, or the key is invalid. [root@sj ~]# /etc/init.d/named restart Stopping named: [ OK ] Starting named: [ OK ] [root@sj ~]# All I want it a caching DNS server for Squid and a few hundred computers to use. Is this error going to be an issue? If so, how do I fix it? Matt

2 1

tzdata - extra info.
by Steve Campbell 07 Feb '07

07 Feb '07

Sorry for the extra info required, but I had digest mode turned on and wouldn't have received the mailing till tomorrow. I have since updated the data manually, but after 'yum update tzdata' was run, the zdump -v for EST5EDT and America/New_York all still showed a date of April 1, instead of March 11. After manually fixing, it is correct. This was mostly a question about why yum provided a tzdata that was for a 2006a rpm instead of the 2006g or later when I did the yum. Thanks Steve Campbell campbell(a)cnpapers.com Charleston Newspapers

3 2

Folding @Home team
by Scott Silva 07 Feb '07

07 Feb '07

I see team Centos will soon be approaching the #150 spot. the_dobc -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

2 1

Re: tzdata - extra info.
by Steve Campbell 07 Feb '07

07 Feb '07

Ralph, Of course not - I didn't get the fasttrack rpm. Sorry for the noise. Steve Campbell campbell(a)cnpapers.com Charleston Newspapers ----- Original Message ----- From: "Steve Campbell" <campbell(a)cnpapers.com> To: "CentOS Users" <centos(a)centos.org> Sent: Wednesday, February 07, 2007 2:17 PM Subject: tzdata - extra info. > Sorry for the extra info required, but I had digest mode turned on and > wouldn't have received the mailing till tomorrow. > > I have since updated the data manually, but after 'yum update tzdata' was > run, the zdump -v for EST5EDT and America/New_York all still showed a date > of April 1, instead of March 11. After manually fixing, it is correct. > > This was mostly a question about why yum provided a tzdata that was for a > 2006a rpm instead of the 2006g or later when I did the yum. > > Thanks > > Steve Campbell > campbell(a)cnpapers.com > Charleston Newspapers

1 0

RE: [CentOS] qmail on CentOS 4.4
by Mark Schoonover 07 Feb '07

07 Feb '07

R Lists06 wrote: >> I've tried to install qmail 1.03 on CentOS 4.4 using the command: >> >> # make setup check >> >> and I received this error: >> >> ./load auto-str substdio.a error.a str.a >> substdio.a(substdo.o)(.text+0x43): In function `allwrite': >>> undefined reference to `errno' >> collect2: ld returned 1 exit status >> make: *** [auto-str] Error 1 >> >> Can anyone please help? >> >> TIA >> Dick Holland >> > > http://www.google.com > > http://qmail.jms1.net > > http://www.qmailrocks.org > > and there is lifewithqmail.org and several others > > basically what I am saying, is that you should have a well thought > out full install before you start of your just in for headaches > > if you don't install qmail properly and it is an internet facing > unit, some unpleasant issues will eventually arise. > > :-) > > - rh IIRC correctly, this is the (in)famous errno problem. It requires a patch to put qmail at 1.03. Life with qmail has all the instruction you need to patch and install qmail. There's a script to do it all for you. Qmail is really straight forward provided you follow the install directions to the letter. Once you do, you'll have the best SMTP server running. Thanks! Mark Schoonover *** Winner of the 2008 Best Psychic Award IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816

10 22

CentOS-announce Digest, Vol 24, Issue 3
by centos-announce-request＠centos.org 07 Feb '07

07 Feb '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0044 Moderate CentOS 3 i386 bind - security update (Tru Huynh) 2. CESA-2007:0044 Moderate CentOS 3 x86_64 bind - security update (Tru Huynh) 3. CESA-2007:0044-01: Moderate CentOS 2 i386 bind security update (John Newbigin) 4. CESA-2007:0044 Moderate CentOS 4 x86_64 bind - security update (Johnny Hughes) 5. CESA-2007:0044 Moderate CentOS 4 i386 bind - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 6 Feb 2007 22:49:08 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0044 Moderate CentOS 3 i386 bind - security update To: centos-announce(a)centos.org Message-ID: <20070206214908.GA17467(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0044 bind security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0044.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/bind-9.2.4-20.EL3.i386.rpm updates/i386/RPMS/bind-chroot-9.2.4-20.EL3.i386.rpm updates/i386/RPMS/bind-devel-9.2.4-20.EL3.i386.rpm updates/i386/RPMS/bind-libs-9.2.4-20.EL3.i386.rpm updates/i386/RPMS/bind-utils-9.2.4-20.EL3.i386.rpm source: updates/SRPMS/bind-9.2.4-20.EL3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update bind Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

DVD for x64
by Mário Gamito 07 Feb '07

07 Feb '07

Hi, Does anyone knows of a site that has the x64 CentOS DVD for download ? Or is it just bittorrent ? Any help would be appreciated. Warm Regards, Mário Gamito

3 2

LDAP con ppolicy
by Alexander Lopez 07 Feb '07

07 Feb '07

Hola a todos... Compile openLDAP y habilite --enable-overlays como modulos.. Entonces ppolicy.la se creo.. pero cuando en el archivo de configuracion de ldap coloco lo siguiente funciona: # Load dynamic backend modules: modulepath /usr/local/libexec/openldap moduleload ppolicy.la # password policy overlay ppolicy ppolicy_default "cn=Standard Policy,ou=Policies,dc=jovenesdemocracia,dc=org" Y cuando trato de levantar me sale el siguiente error: overlay "ppolicy" not found Y cuando comento overlay ppolicy y levanto de nuevo ldap me funciona bien.. Entonce mi pregunta es si ppolicy esta como modulo no hay necesidad de colocar en el archivo de configuracion el parametro overlay ppolicy. Espero sus comentarios...

1 0

Centos VPS providers in the European Union?
by M. Fioretti 07 Feb '07

07 Feb '07

Hello, I may need to set up soon a Linux VPS, to be used almost exclusively for handling email (as in "2GB of disk space, 2GB/month of bandwidth would be surely enough") with a fully customized postfix/procmail/dovecot setup. I'd prefer to use Centos, which I already use and know. One reason why I'm asking this here is that I'd really like to be sure, before I go for it, that the provider not only _offers_ Centos VPS but also actually _know_ Centos, so they can help if some problems with their setup comes up. Now, for several reasons I am only interested in companies which are 100% based in the European Union (both the legal entity and the datacenter) _and_ speak English with their customers, thanks. Another requirement is that it has to be a provider which: * either doesn't host anonymizers, adult content and warez altogether, or * if it does, it does it on a completely different set of IP addresses the reason is exclusively technical, ie availability: I have already seen where I work the webmail of several, absolutely family-safe websites blocked because, as it turns out, they sit on the same IP address or IP block used by adult/warez sites. It may be stupid, but that's the way it is, and I can't control it. Do you know any good and reliable provider with this profile? Any feedback is welcome, either on list or privately. Thanks, Marco -- The right way to make everybody love Free Standards and Free Software: http://digifreedom.net/node/73

1 0

Re: [CentOS] Centos VPS providers in the European Union?
by amitgspace-999999＠yahoo.co.in 07 Feb '07

07 Feb '07

Hi, Linode.com is good VPS solution although not europian With regards, Amit Gupta Bangalore, India Yahoo messenger: amitguptainn Skype: amitguptainn Mobile:9900696870 (Bangalore), 9818558121(Delhi) When 9900696870 is not reachable, call at 9818558121 ------------------------------------------------------ Help disabled in his commutation ------------------------------------------------------ ----- Original Message ---- From: M. Fioretti <mfioretti(a)mclink.it> To: centos(a)centos.org Sent: Wednesday, 7 February, 2007 7:42:50 PM Subject: [CentOS] Centos VPS providers in the European Union? Hello, I may need to set up soon a Linux VPS, to be used almost exclusively for handling email (as in "2GB of disk space, 2GB/month of bandwidth would be surely enough") with a fully customized postfix/procmail/dovecot setup. I'd prefer to use Centos, which I already use and know. One reason why I'm asking this here is that I'd really like to be sure, before I go for it, that the provider not only _offers_ Centos VPS but also actually _know_ Centos, so they can help if some problems with their setup comes up. Now, for several reasons I am only interested in companies which are 100% based in the European Union (both the legal entity and the datacenter) _and_ speak English with their customers, thanks. Another requirement is that it has to be a provider which: * either doesn't host anonymizers, adult content and warez altogether, or * if it does, it does it on a completely different set of IP addresses the reason is exclusively technical, ie availability: I have already seen where I work the webmail of several, absolutely family-safe websites blocked because, as it turns out, they sit on the same IP address or IP block used by adult/warez sites. It may be stupid, but that's the way it is, and I can't control it. Do you know any good and reliable provider with this profile? Any feedback is welcome, either on list or privately. Thanks, Marco -- The right way to make everybody love Free Standards and Free Software: http://digifreedom.net/node/73 _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

RE: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver - Correction
by Mark Hull-Richter 07 Feb '07

07 Feb '07

Actually, here is what shows up in the log, regardless of whether the driver is built-in or loaded as a module: Feb 5 10:16:15 sparenode1 sysctl: net.ipv4.conf.default.rp_filter = 1 Feb 5 10:16:15 sparenode1 sysctl: net.ipv4.conf.default.accept_source_route = 0 Feb 5 10:16:15 sparenode1 sysctl: kernel.sysrq = 0 Feb 5 10:16:15 sparenode1 sysctl: kernel.core_uses_pid = 1 Feb 5 10:16:15 sparenode1 network: Setting network parameters: succeeded Feb 5 10:16:15 sparenode1 network: Bringing up loopback interface: succeeded Feb 5 10:16:15 sparenode1 ifup: Device eth0 has different MAC address than expected, ignoring. Feb 5 10:16:15 sparenode1 network: Bringing up interface eth0: failed Feb 5 10:16:15 sparenode1 ifup: Device eth1 has different MAC address than expected, ignoring. Feb 5 10:16:15 sparenode1 network: Bringing up interface eth1: failed It has been suggested that I edit out the HWADDR= contents from the /etc/sysconfig/network-scripts file and restart the network. Any other/further input? Thanks. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Mark Hull-Richter Sent: Monday, February 05, 2007 6:35 PM To: CentOS mailing list Subject: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver I get the following results when I try to load the 2.6.11.4 kernel with an Intel e1000 driver (the one that comes in the kernel source): 1) If I build it into the kernel, nothing shows up at all. 2) If I build it as a loadable module, I get errors on eth0 and eth1 that the MAC address is different than expected, and it ignores the controller. What's up with this? Thanks. mhr _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

3 2

RE: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction
by Mark Hull-Richter 07 Feb '07

07 Feb '07

1) I'm actually not building a custom kernel per se, just one from the standard 2.6.11.4 with our configuration. I may be adding a custom driver, but unless I can get the standard kernel to boot,... 2) I have been told that after 2.6.11.4, support for the Infiniband driver is dropped, and we need that. If this is not the case, I would be delighted to know that and proceed accordingly. I'm not sure, but I believe that CentOS version 5 will not happen soon enough for what we need. Thanks. mhr -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Jim Perrin Sent: Tuesday, February 06, 2007 5:04 PM To: CentOS mailing list Subject: Re: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction On 2/6/07, Mark Hull-Richter <mhull-richter(a)datallegro.com> wrote: > Any other/further input? Yes, though not directly related to your issue. 1. Why build a custom kernel instead of sticking with the distro provided one? 2. If you feel that you absolutely have to build a custom kernel, why build such an old one? -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Centos 4.4 NFSv4
by Vasiliy Boulytchev 07 Feb '07

07 Feb '07

Ladies and Gents, Having a rough time with nfsv4... Trying to mount via NFS v4 to get ACL support... I am getting this when i try to mount: NFS mount version 4 s not supported. here are my fstab options: nfs rw,hard,intr,exec,acl,mountvers=4 Nfs clients installed: nfs-utils-1.0.6-70.EL4 nfs-utils-lib-1.0.6-3 system-config-nfs-1.2.8-1 I presume I need to upgrade... how would I go about doing so? The contrib repos are enabled. THANKS FOR YOUR HELP -- Vasiliy Boulytchev vasiliy(a)linuxspecial.com

2 3

SLI 4 monitor DELL workstation and CentOS
by Charles Gregg 06 Feb '07

06 Feb '07

Anyone doing Centos on SLI 4 monitor workstation? I am currently building a workstation out with Dell for this. I hope to use CentOS (x86_64) on it. Any advice or words of wisdom would be GREAT! This will be my first attempt at SLI. I have done 4 screens but AGP/PCI combos only. This one we need hardcore 3D ability on all of them. I would like to use CentOS 4.2, will atleast try it first then 4.4. Any info will be apreaciated. Once ordered I will post my success or horror story of getting CentOS going on it. Thanks, Charles Gregg This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the original recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify the sender and delete the original.

1 0

Increasing existing partition and LVM size
by Alfred von Campe 06 Feb '07

06 Feb '07

I have a disk on which CentOS is installed and running. The disk partitions look like this: Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 1044 8281507+ 8e Linux LVM What I would like to do is increase the size of the second partition to be the entire disk, and then grow the logical volume(s) and the file systems on it. BTW, this is all on a VMware virtual disk, so I really can't screw things up, as I have a copy of the VMDK files and can start over again (and again, and again...). The disk was originally 8GB, and I just resized it with vmware-vdiskmanager. I have tried to use parted to resize the partition, but I get the message "Error: Could not detect file system.", and I can't find a way to resize the partition with fdisk and sfdisk. Am I missing something obvious or is this not doable? Thanks, Alfred

4 4

Unablce to open VNC
by Todd Cary 06 Feb '07

06 Feb '07

I have vnc working on my server when I am logged into that server. If I run vncviewer, I have a copy of the Desktop. Hwever, if I SSH into the server, I get an error. Due to my lack of experience, I am not sure what the log file means: http://209.204.172.137/misc/vnc_error.txt Could someone tell me what I am missing? Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

6 15

qmail on CentOS 4.4
by CentOS mailing list 06 Feb '07

06 Feb '07

I've tried to install qmail 1.03 on CentOS 4.4 using the command: # make setup check and I received this error: ./load auto-str substdio.a error.a str.a substdio.a(substdo.o)(.text+0x43): In function `allwrite': : undefined reference to `errno' collect2: ld returned 1 exit status make: *** [auto-str] Error 1 Can anyone please help? TIA Dick Holland

4 4

RE: [CentOS] Adaptec 29320
by Bowie Bailey 06 Feb '07

06 Feb '07

Joshua Baker-LePain wrote: > On Tue, 6 Feb 2007 at 11:06am, Bowie Bailey wrote > > > I need a SCSI card to attach a tape library to my system. I am > > looking at the Adaptec 29320A-R. Can anyone confirm that this card > > will work with the stock CentOS 4 kernel? > > I can't confirm (I've been using LSI SCSI boards for a while now), > but all indications look good. > > Out of curiosity, what sort of and how many tape drives are in the > library? This is an HP SureStore DLT Library. It has 2 drives and 15 tapes. Hmmm... The LSI cards are quite a bit cheaper than the Adaptec cards. If they are good, I may go with one of those instead. The LSI00011-F card looks like it has what I need at about half the price of the Adaptec. Which cards are you using? -- Bowie

3 2

RE: [CentOS] Adaptec 29320
by Bowie Bailey 06 Feb '07

06 Feb '07

Joshua Baker-LePain wrote: > On Tue, 6 Feb 2007 at 11:51am, Bowie Bailey wrote > > > Joshua Baker-LePain wrote: > > > > > > I can't confirm (I've been using LSI SCSI boards for a while now), > > > but all indications look good. > > > > > > Out of curiosity, what sort of and how many tape drives are in the > > > library? > > > > This is an HP SureStore DLT Library. It has 2 drives and 15 tapes. > > > > Hmmm... The LSI cards are quite a bit cheaper than the Adaptec > > cards. If they are good, I may go with one of those instead. The > > LSI00011-F card looks like it has what I need at about half the > > price of the Adaptec. Which cards are you using? > > I've currently got a 21320 and a 22320 in production, but I've used > the U320 in the past. The 22320 drives my LTO3 library with 2 > drives, since each drive needed to be on its own channel in order to > work at full speed. Apparently the one I am looking at is the U320 (why can't they just use a single part number?). I only need one channel. The two drives in the library will be attached to two separate machines. -- Bowie

1 0

imap pop3 servers
by Doc Schneider 06 Feb '07

06 Feb '07

I'm doing a complete upgrade of a server which I was using uw-imap for the imap/pop4 daemons.(This was an old RH 7.2 system and has been upgraded to CentOS 4.4 64bit) I notice there isn't an rpm at any of the repositories for this. I do pop before smpt for the remote users I have and also use procmail for calling spamc from SpamAssassin. Is there some place I can get uw's imap or do I need to settle for using something like Dovecot? (Which doesn't support procmail AFAICT) Also I did do a search and read the wiki for CentOS and just about everyplace I could think of. Thanks for any and all suggestions. -- -Doc Lincoln, NE. http://www.genealogyforyou.com/ http://www.cairnproductions.com/

11 20

RE: [CentOS] Adaptec 29320
by Graham Johnston 06 Feb '07

06 Feb '07

We are using a Adaptec 39320A PCIe with a Dell PowerEdge 2950 server. Using with a Dell PowerVault tape changer and TSM. graham -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Bowie Bailey Sent: Tuesday, February 06, 2007 10:06 AM To: CentOS mailing list (E-mail) Subject: [CentOS] Adaptec 29320 I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Server Tutorials but written in Spanish
by Erick Perez 06 Feb '07

06 Feb '07

this message is mostly for the spanish speaking people on this list. To avoid reinventing the wheel, i was doing a google search for centos based server tutorials but in spanish. I found several things, but not much. I am looking for tutorials about: How to setup postfix with centos, dovecot, creating rpm, apache,bind I will teach some unix basics to my students (Oh God!) but I'm a lazy teacher and I don't want to write from scratch. Pointers for manuals will be gladly accepted (centos/rpm based). Otherwise, I will have to write 'em from scratch. thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

3 2

Adaptec 29320
by Bowie Bailey 06 Feb '07

06 Feb '07

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

2 1

RE: [CentOS] qmail on CentOS 4.4
by Mark Schoonover 06 Feb '07

06 Feb '07

Jim Perrin wrote: >> IIRC correctly, this is the (in)famous errno problem. It requires a >> patch to put qmail at 1.03. Life with qmail has all the instruction >> you need to patch and install qmail. There's a script to do it all >> for you. Qmail is really straight forward provided you follow the >> install directions to the letter. Once you do, you'll have the best >> SMTP server running. > > *COUGH* > <flame war> > So... the patch upgrades qmail to postfix? > > /runs I am honored you commented on my post! :) Thanks! Mark Schoonover *** Winner of the 2008 Best Psychic Award IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816

1 0

CODA or NFS
by Alexander Lopez 06 Feb '07

06 Feb '07

Hi Friends.. Well, I have setting OpenLDAP on CentOS 4.4 on a Blade Server.. I am trying of setting a cluster.. But I don't know that use: NFS or CODA.. What is you opinion?

3 2

clamd error
by Indunil Jayasooriya 06 Feb '07

06 Feb '07

Hi, I get the below error, while starting clamd. what's wrong with it? help is needeed. [root@worldnet clamav]# /etc/init.d/clamd start Starting Clam AntiVirus Daemon: LibClamAV Error: cli_cvdload(): Can't create temporary directory /var/tmp/clamav-25f631f5d9a7b846 LibClamAV Error: Can't load /var/clamav/main.cvd: Unable to create temporary directory ERROR: Unable to create temporary directory [FAILED] -- Thank you Indunil Jayasooriya

3 2

vsftp
by John Hinton 06 Feb '07

06 Feb '07

I'm having an odd behavior with vsftp on all CentOS 4 servers... maybe 3 too, but I'm not on those much. I am transferring in port mode as I've never managed to get passive to work with a firewall running. Anyway, this is what happens. During normal transfers with few files.. it works perfectly. During the transfer of like a large website with hundreds of files in various directories, from a fast connection, vsftp stalls out with a high degree of consistency. I thought this was happening only when I was doing this locally through the intranet, but I have now discovered our outside users are having the same problem when they are on a hi speed connection. Does anyone have any ideas as to why this is happening? Thanks, John Hinton

2 1

Problem with 2.6.11.4 kernel and e1000 driver
by Mark Hull-Richter 06 Feb '07

06 Feb '07

I get the following results when I try to load the 2.6.11.4 kernel with an Intel e1000 driver (the one that comes in the kernel source): 1) If I build it into the kernel, nothing shows up at all. 2) If I build it as a loadable module, I get errors on eth0 and eth1 that the MAC address is different than expected, and it ignores the controller. What's up with this? Thanks. mhr

1 0

KDE oops
by Ted Miller 06 Feb '07

06 Feb '07

I realize this may technically be "off topic", but I have made all the icons on my KDE desktop disappear. It is something in the KDE setup in my /home/tmiller/... setup, as my wife's icons work fine. It is probably the result of something I deleted or moved in moving my home directory from Mandriva 2006 to Centos 4. The files are all in /home/tmiller/Desktop, but they don't show up on the desktop. Neither do the device icons, or any other icons. I have the Configure-Desktop -> Behavior -> General -> Show icons on desktop box checked, but the don't show. I hope someone will recognize my problem and be able to help me with 10 seconds of typing. If no one knows what I have done I will quietly go looking for a KDE forum or mailing list to plead my case in. Ted Miller Indiana

1 0

Recommendations for Lexmark Z11 driver install?
by Bart Schaefer 06 Feb '07

06 Feb '07

I've "inherited" an old Lexmark Z11 and would like to plug it in to my CentOS 4 box as a second printer. I shut down, hooked it up to the parallel port, rebooted, and hwbrowser recognizes it on /dev/lp0, so I ran through setting it up as a queue with printconf-gui. However, printing the test page fails because the renderer "lz11.foomatic" is not found (details below for anyone who wants to read that far). A quick look at linuxprinting.org leads me to the lz11 project. I've downloaded lz11-V2-1.2 which contains lz11.foomatic, but after reading through the installer shell script I'm not exactly happy about what it's going to do to my rpm-based cups install (clobber files in the foomatic directories and drop a whole lot of utility scripts in /usr/bin, among other things). Any advice on how best to proceed would be appreciated: What's the least disruptive way to do the upgrade? As an aside, why does printconf-gui allow one to select a printer for which the driver is not installed? (Should lz11.foomatic be available from somewhere else, and I simply haven't installed all the right centos packages?) __________ Here's the rundown of what I've tried so far, starting with the log output when the test print fails: I [04/Feb/2007:20:33:06 -0800] Adding start banner page "none" to job 4. I [04/Feb/2007:20:33:06 -0800] Adding end banner page "none" to job 4. I [04/Feb/2007:20:33:06 -0800] Job 4 queued on 'Lexmark' by 'root'. I [04/Feb/2007:20:33:06 -0800] Started filter /usr/lib/cups/filter/pstops (PID 6400) for job 4. I [04/Feb/2007:20:33:06 -0800] Started filter /usr/lib/cups/filter/foomatic-rip (PID 6401) for job 4. E [04/Feb/2007:20:33:06 -0800] PID 6401 stopped with status 1! I [04/Feb/2007:20:33:06 -0800] Hint: Try setting the LogLevel to "debug" to find out more. I [04/Feb/2007:20:33:06 -0800] Saving printers.conf... If I look with "lpq" I find: Lexmark is not ready Rank Owner Job File(s) Total Size 1st root 4 testprint.ps 15360 bytes (Jobs 1-3 were previous failed attempts at printing the test page, which I deleted with lprm.) Any clues as to why "Lexmark is not ready"? "lpstat -a" says: Lexmark accepting requests since Jan 01 00:00 Obviously that date is a bit wacky. I tried "lpc": lpc> status Lexmark: printer is on device 'parallel' speed -1 queuing is enabled printing is enabled no entries daemon present So I rebooted again, and now lpc shows exactly the same but lpq says: Lexmark is ready no entries However, printing the test page still fails with exactly the same "stopped with status 1" error. (The printer remains "ready" now, even after the job fails.) So I set LogLevel debug as suggested and this appears to be the relevent part of the output: D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer command: lz11.foomatic --papersize=letter --color=0 --inksaving=1 --resx=582 --resy=582 D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer return value: 16777215 D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer received signal: 16777215 D [04/Feb/2007:21:45:18 -0800] [Job 6] Process dying with "The renderer command line returned an unrecognized error code 16777215.", exit stat: 1 D [04/Feb/2007:21:45:18 -0800] [Job 6] The renderer command line returned an unrecognized error code 16777215. D [04/Feb/2007:21:45:18 -0800] [Job 6] D [04/Feb/2007:21:45:18 -0800] [Job 6] Closing renderer D [04/Feb/2007:21:45:18 -0800] [Job 6] KID3 exited with status 1 D [04/Feb/2007:21:45:18 -0800] [Job 6] Renderer exit stat: 1

1 1

CentOS 4.4 ServerCD
by Alexander Lopez 05 Feb '07

05 Feb '07

Hi Friends.. My name is Alexander... I installed CentOS 4.4 x86_64 Server from ServerCD. My questios is: If I can install develop tools from CD's CentOS 4.4 x86_64.. Help me please...

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss