- Discuss - lists.centos.org

FW: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install
by Phillip Crump 11 Nov '06

11 Nov '06

The raid card is an Adaptec 2100S. -----Original Message----- From: Josh Paetzel [mailto:josh@tcbug.org] Sent: Saturday, November 11, 2006 9:35 AM To: tclug-list(a)mn-linux.org; pjcrump(a)bitstream.net Subject: Re: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install On Saturday 11 November 2006 01:20, Phillip Crump wrote: > I have a new (used)Dell Poweredge 1550 server with 2 scsi drives > (dual 1ghz w/ 2048MB) that I'm attempting to install CentOs 4 onto > and am having problems getting the darn thing to recognize the hard > drives. (it's worth noting that it's running RAID 0 and the RAID > bios recognizes both drives as being in "optimal" state). I start > the > installation process and all is going well until it autoprobes. All > other hardware is found > except for the hard drives. The install subsequently fails because > there the drives can't be found. > > I have been googling my brain out over the last week and this seems > to be an issue with installing linux > on this particular server model. (surrounding the megaraid driver > and have tried many of the > things out there to no avail. > > To see what I have been trying checkout this mailing list entry: > http://lists.centos.org/pipermail/centos/2005-August/010021.html > > Any advice that anyone can give is appreciated! > > P.S. I have tried to install Debian, Mandrake and FC6 to no avail. > > > PJ If memory serves there were a few different RAID controllers available for the 1550. Since you don't mention which controller yours has it's only possible to offer suggestions. One possibility is that there simply isn't a linux driver for it, in which case it isn't going to matter which distro you try to install on it. It's just not going to work. Another option that you may have is that some of the RAID controllers that Dell used (the PERC/3's come to mind) had the ability to emulate a plain SCSI controller. This was generally togglable in the BIOS. If yours has this option it's possible that it will emulate something that there is a driver for. I have actually run into this before with the PE2450s. In SCSI mode the controller appeared as an adaptec 78xx which had a driver, in RAID mode it was something completely different (what exactly it was escapes me at the moment). -- Thanks, Josh Paetzel

2 1

artsd eating CPU cycles when idle
by Aleksandar Milivojevic 11 Nov '06

11 Nov '06

I've noticed that artsd sometimes eats as much as 20% of CPU when idle. This is on my old laptop (where playing MP3s eats up to 50-60% of CPU). On newer faster processors this would probably go unnoticed (if it eats 20% on Pentium MMX, on Pentium 4 it might be around 1-2% or even lower). Just wondering if anybody else noticed this behaviour?

1 0

CentOS-announce Digest, Vol 21, Issue 7
by centos-announce-request＠centos.org 11 Nov '06

11 Nov '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0733 Critical CentOS 4 s390(x) firefox - security update (Pasi Pirhonen) 2. CESA-2006:0726 Moderate CentOS 4 s390(x) wireshark - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 10 Nov 2006 21:15:56 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0733 Critical CentOS 4 s390(x) firefox - security update To: centos-announce(a)centos.org Message-ID: <20061110191556.GX30294(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0733 https://rhn.redhat.com/errata/RHSA-2006-0733.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/firefox-1.5.0.8-0.1.el4.centos4.s390.rpm s390x: updates/s390x/RPMS/firefox-1.5.0.8-0.1.el4.centos4.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Drives Not Recognized on Dell Poweredge 1550 CentOs4 install
by Phillip Crump 11 Nov '06

11 Nov '06

I have a new (used)Dell Poweredge 1550 server with 2 scsi drives (dual 1ghz w/ 2048MB) that I'm attempting to install CentOs 4 onto and am having problems getting the darn thing to recognize the hard drives. (it's worth noting that it's running RAID 0 and the RAID bios recognizes both drives as being in "optimal" state). I start the installation process and all is going well until it autoprobes. All other hardware is found except for the hard drives. The install subsequently fails because there the drives can't be found. I have been googling my brain out over the last week and this seems to be an issue with installing linux on this particular server model. (surrounding the megaraid driver and have tried many of the things out there to no avail. To see what I have been trying checkout this mailing list entry: http://lists.centos.org/pipermail/centos/2005-August/010021.html Any advice that anyone can give is appreciated! PJ

3 3

hdparm equivalent for SATA
by Jerry Geis 11 Nov '06

11 Nov '06

Hi, I was wanting to run the equivalent of "hdparm -Tt /dev/hda" except on a SATA hard disk. What is the equivalent command for an SATA drive? I was wanting to see what kind of speed I am getting on the SATA drive. thanks, Jerry

3 2

chat server program
by Sherwyn Greene 10 Nov '06

10 Nov '06

Hi all, anyone knows about a chat server software for centos, in which I can create chat rooms. Thanks Sherwyn Greene Planner / I.T. Technician Project Controls Dept. Kentz-OJ's E&I Services J.V. +1 (868) 648-0876

5 4

CentOS-announce Digest, Vol 21, Issue 6
by centos-announce-request＠centos.org 10 Nov '06

10 Nov '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0734 Critical CentOS 4 ia64 seamonkey - security update (Pasi Pirhonen) 2. CESA-2006:0726 Moderate CentOS 3 ia64 wireshark - security update (Pasi Pirhonen) 3. CESA-2006:0733 Critical CentOS 4 ia64 firefox - security update (Pasi Pirhonen) 4. CESA-2006:0734 Critical CentOS 4 i386 seamonkey - security update (Johnny Hughes) 5. CESA-2006:0734 Critical CentOS 4 x86_64 seamonkey - security update (Johnny Hughes) 6. CESA-2006:0733 Critical CentOS 4 x86_64 firefox - security update (Johnny Hughes) 7. CESA-2006:0733 Critical CentOS 4 i386 firefox - security update (Johnny Hughes) 8. CESA-2006:0735 Critical CentOS 4 i386 thunderbird - security update (Johnny Hughes) 9. CESA-2006:0735 Critical CentOS 4 x86_64 thunderbird - security update (Johnny Hughes) 10. CESA-2006:0727 Moderate CentOS 4 x86_64 texinfo - security update (Johnny Hughes) 11. CESA-2006:0727 Moderate CentOS 4 i386 texinfo - security update (Johnny Hughes) 12. CESA-2006:0729 Moderate CentOS 4 i386 ruby - security update (Johnny Hughes) 13. CESA-2006:0729 Moderate CentOS 4 x86_64 ruby - security update (Johnny Hughes) 14. CESA-2006:0730 Important CentOS 4 i386 php - security update (Johnny Hughes) 15. CESA-2006:0730 Important CentOS 4 x86_64 php - security update (Johnny Hughes) 16. CESA-2006:0726 Moderate CentOS 4 ia64 wireshark - security update (Pasi Pirhonen) 17. CESA-2006:0726 Moderate CentOS 3 i386 wireshark - security update (Tru Huynh) 18. CESA-2006:0726 Moderate CentOS 3 x86_64 wireshark - security update (Tru Huynh) 19. CESA-2006:0734 Critical CentOS 4 s390(x) seamonkey - security update (Pasi Pirhonen) 20. CESA-2006:0726 Moderate CentOS 4 x86_64 wireshark - security update (Johnny Hughes) 21. CESA-2006:0726 Moderate CentOS 4 i386 wireshark - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 9 Nov 2006 21:40:15 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0734 Critical CentOS 4 ia64 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20061109194015.GS30294(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0734 https://rhn.redhat.com/errata/RHSA-2006-0734.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/seamonkey-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-chat-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-devel-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-dom-inspector-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-js-debugger-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-mail-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-devel-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-nss-1.0.6-0.1.el4.centos4.ia64.rpm updates/ia64/RPMS/seamonkey-nss-devel-1.0.6-0.1.el4.centos4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

A new attack
by John Hinton 10 Nov '06

10 Nov '06

Log report is reporting a lot of these lately.. following is just a short snippet from the beginning on one server. WARNING!!!! Possible Attack: Attempt from 104.29.broadband2.iol.cz [83.208.29.104] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from 106.7.broadband7.iol.cz [88.102.7.106] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from 106.74.broadband5.iol.cz [88.100.74.106] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from 126.239.broadband7.iol.cz [88.102.239.126] with: command=HELO/EHLO, count=3 : 1 Time(s) Attempt from 144.Red-80-34-151.staticIP.rima-tde.net [80.34.151.144] with: command=HELO/EHLO, count=3 : 1 Time(s) Could anyone expand on what these folks are actually doing? And if I should be concerned? This is happening on both my CentOS 3 and 4 systems, all running Sendmail. Thanks, John Hinton

4 4

php-mcrypt extension
by Shaun T. Erickson 10 Nov '06

10 Nov '06

I see that there are a plethora of php extensions available as rpms, from the centos repositories, but not the php-mcrypt extension. I'm trying to stick to an rpm-only system and haven't found one that provides this, yet, for my 4.4 system. Is there any plan to add this to the repository in the near future (if at all)? Does anyone know where I can get it, otherwise? I see there is one for FC4. Perhaps I can do a --rebuild on it? -- -ste

5 10

Centos 4.4 ipvsadm problem
by Jonathan Lundberg 10 Nov '06

10 Nov '06

Hi All, Using CentOS 4.4 with ipvsadm-1.24-6. I am using LVS/ipvsadm to load balance webservers, with about 20 VIP's in use. My problem is that when I start the pulse service, all of the interfaces seem to appear correctly in the output of ipvsadm -ln , but it is not possible to connect to them. I discovered that the ones I _CAN_ connect to appear in the full ifconfig listing, while for some reason, the ones that I can't connect to are missing from the output of the ifconfig command. When I bring them up 'manually' using ifconfig after ipvsadm has run, it is then possible to connect to them no problem. This isn't very elegant, and goes against the LVS how-to, as well as being a bit of a pain when you want to fail over from one LVS server to another. Has anyone encountered a similar problem to this? Cheers, Jonathan *********************************************************** The information in this e-mail is confidential and may be legally privileged. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Please note that emails to, from and within RTÉ may be subject to the Freedom of Information Act 1997 and may be liable to disclosure. ************************************************************

1 0

bacula rpm --rebuild on x86_64?
by Gordon McLellan 10 Nov '06

10 Nov '06

I tried to install the latest bacula last night, rebuilding from the source rpm ... this is the command line I used, following the instructions at bacula.org: # rpmbuild --rebuild --define "build_centos4 1" \ --define "build_x86_64 1" --define "build_mysql4 1" bacula-1.39.26-1.src.rpm but the rebuild fails, citing all sorts of dependencies being required. problem is, all the dependencies it mentions are for 386 and/or 32 bit, not x86_64. when I try doing a yum install somedependency, yum informs me it's already installed so I tried to do a yum localinstall of the source rpm, and yum tries to download the 32bit versions of the dependencies and then fails when they conflict with the 64bit versions already installed. here's the output of the rebuild: [root@tachyon ~]# rpmbuild --rebuild --define "build_centos4 1" --define "build_x86_64 1" --define "build_mysql4 1" bacula-1.39.26-1.src.rpm Installing bacula-1.39.26-1.src.rpm warning: user sbarn does not exist - using root warning: user sbarn does not exist - using root warning: user sbarn does not exist - using root warning: user sbarn does not exist - using root warning: user sbarn does not exist - using root warning: user sbarn does not exist - using root error: Failed build dependencies: gcc-c++ is needed by bacula-1.39.26-1.x86_64 autoconf is needed by bacula-1.39.26-1.x86_64 atk-devel is needed by bacula-1.39.26-1.x86_64 libstdc++-devel = 3.4.6-3 is needed by bacula-1.39.26-1.x86_64 libxml2-devel is needed by bacula-1.39.26-1.x86_64 pkgconfig is needed by bacula-1.39.26-1.x86_64 pango-devel is needed by bacula-1.39.26-1.x86_64 libtermcap-devel is needed by bacula-1.39.26-1.x86_64 gtk2-devel >= 2.4 is needed by bacula-1.39.26-1.x86_64 libgnomeui-devel >= 2.8 is needed by bacula-1.39.26-1.x86_64 ORBit2-devel is needed by bacula-1.39.26-1.x86_64 libart_lgpl-devel >= 2.3 is needed by bacula-1.39.26-1.x86_64 libbonobo-devel >= 2.8 is needed by bacula-1.39.26-1.x86_64 libbonoboui-devel >= 2.8 is needed by bacula-1.39.26-1.x86_64 bonobo-activation-devel is needed by bacula-1.39.26-1.x86_64 GConf2-devel is needed by bacula-1.39.26-1.x86_64 freetype-devel is needed by bacula-1.39.26-1.x86_64 [root@tachyon ~]# uname -a Linux tachyon 2.6.18.1 #3 Fri Oct 20 23:35:27 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux yes, I'm running a non standard kernel ... I needed to upgrade to get better software raid support - if that is the problem, I can boot back into the standard kernel, since I only needed 18.1 to use the "mdadm --grow" feature to expand my raid5 array any ideas? thanks, Gordon

2 3

Sluggish X session with Cygwin/X and gnome desktop
by Wei-min Lee 10 Nov '06

10 Nov '06

Hello, I just installed CentOS 4.4 and when I connect to it from my XP machine using Cygwin/X and the gnome desktop I've noticed that after a couple of minutes it slows to a crawl (menus and dialog boxes don't display immediately when I click on them). Accessing the X session from the console does not exhibit this behavior. Just recently, instead of going with the default gnome desktop and just to rule out possible connectivity concerns, I selected the KDE desktop during logon and did not notice this behavior. I tried comparing gdm.conf to my RHL7.3 machine and I'm not seeing anything drastically different so what am I overlooking? Wei-min Lee

3 4

centos3.8 - outdated coreutils package
by Ivan Pesin 10 Nov '06

10 Nov '06

Hello, I have a number centos3.8 installations. Recently I have figured out that version of coreutils is : [ivan@algol ivan]$ rpm -q coreutils coreutils-4.5.3-28.1 while RedHat has released an bux fix errata to that package: https://rhn.redhat.com/errata/RHBA-2006-0670.html Actually I discovered that when I encounter bug that should be fixed by this update: http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200327 Why this package is not included in recent centos3 updates? Thank you, Ivan

3 3

Running a 32-bit application on CentOS3-x64
by Ugo Bellavance 09 Nov '06

09 Nov '06

Hi, I'm trying to run Norman anti-virus on a CentOS 3 box, x64. Is it possible? Running the binary gives me this error: [root@server bin]# ./nvcc -bash: ./nvcc: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory I guess I would have to install i386 libraries that it requires, as well. It it possible? Regards, Ugo

7 15

Poblem with Centos Logos on X bootup...conversion from whitebox to centos.
by Sanjay Arora 09 Nov '06

09 Nov '06

Hello all I migrated my Centos installation from a whitebox install few months ago. Only one minor issue...on booting up X, the login screen shows whitebox logos. At that time, I did not tackle it because I assumed that it will automatically be upgraded with yum...and again it was not essential to running the OS. What whitebox rpms do I need to substitute with centos ones to correct this behaviour? With regards. Sanjay.

2 1

Re: [CentOS] USB disk dropping out under light load
by Simen Thoresen 09 Nov '06

09 Nov '06

> Simen, > Out of curiosity, that USB Hub you mentioned....is it a "powered" > hub? Have you attempted to directly connect the external USB HDD? > Thanks. Hi Hollen, It is a powered hub. I've restarted my torrent twice, and seen two rather quick failures (twice in a day), so this is a repeatable problem. I've now hooked the disk up on one of the root-ports and will be restarting the download against it. Still - there /should/ not be a problem running over a hub, powered or otherwise. Right? -S > ______________________________________________________________ > H.F. Streit, UNIX Administrator > IMS Group Technician > Southwest Research Institute -- Simen Thoresen, Dolphin ICS

1 0

How to block Yahoo , MSN messanger and Kazza with IPTABLES
by Indunil Jayasooriya 09 Nov '06

09 Nov '06

Hi, I want to block Yahoo Messenger, MSN messanger and Kazza with IPTABLES as my local network users always go there. How Can I do it? I am not runnig iptables as a script nor have I put anything in my rc.local. But instaed, I input the commands and save it by using the below cmmand /etc/init.d/iptables save and I restart it /etc/init.d/iptables restart My box runs on Cent OS 4.4. Help needed. -- Thank you Indunil Jayasooriya

6 8

CentOS-announce Digest, Vol 21, Issue 5
by centos-announce-request＠centos.org 09 Nov '06

09 Nov '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0729 Moderate CentOS 3 ia64 ruby - security update (Pasi Pirhonen) 2. CESA-2006:0729 Moderate CentOS 4 ia64 ruby - security update (Pasi Pirhonen) 3. CESA-2006:0729 Moderate CentOS 3 s390(x) ruby - security update (Pasi Pirhonen) 4. CESA-2006:0729 Moderate CentOS 4 s390(x) ruby - security update (Pasi Pirhonen) 5. CESA-2006:0727-01: Moderate CentOS 2 i386 texinfo security update (John Newbigin) 6. CESA-2006:0729-01: Moderate CentOS 2 i386 ruby security update (John Newbigin) 7. CESA-2006:0734-01: Critical CentOS 2 i386 seamonkey security update (John Newbigin) 8. CESA-2006:0734 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) 9. CESA-2006:0734 Critical CentOS 3 s390(x) seamonkey - security update (Pasi Pirhonen) 10. CESA-2006:0734 Critical CentOS 3 i386 seamonkey - security update (Tru Huynh) 11. CESA-2006:0734 Critical CentOS 3 x86_64 seamonkey - security update (Tru Huynh) 12. CESA-2006:0727 Moderate CentOS 3 i386 texinfo - security update (Tru Huynh) 13. CESA-2006:0727 Moderate CentOS 3 x86_64 texinfo - security update (Tru Huynh) 14. CESA-2006:0729 Moderate CentOS 3 i386 ruby - security update (Tru Huynh) 15. CESA-2006:0729 Moderate CentOS 3 x86_64 ruby - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 8 Nov 2006 21:36:57 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0729 Moderate CentOS 3 ia64 ruby - security update To: centos-announce(a)centos.org Message-ID: <20061108193657.GM30294(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0729 https://rhn.redhat.com/errata/RHSA-2006-0729.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/irb-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-devel-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-docs-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-libs-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-mode-1.6.8-9.EL3.8.ia64.rpm updates/ia64/RPMS/ruby-tcltk-1.6.8-9.EL3.8.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Running iptables/netfilter module connlimit with stock CentOS4
by Andrew Hull 09 Nov '06

09 Nov '06

Greetings folks, I've been researching the various iptables modules that are included with the stock CentOS4 distro; particularly the connlimit module. Is connlimit included by default? I thought it is since performing # iptables -m connlimit --help returns information on connlimit usage along with the general iptables help info: <SNIP> connlimit v1.2.11 options: [!] --connlimit-above n match if the number of existing tcp connections is (not) above n --connlimit-mask n group hosts using mask </SNIP> The library seems to exist also: /lib/iptables/libipt_connlimit.so However, creating a rule that uses connlimit fails: # iptables -A INPUT -p tcp -m connlimit --connlimit-above 2 --dport \ smtp -j REJECT iptables: No chain/target/match by that name # So, am I missing something simple? Or am I limited to using netfilter's patch-o-matic and compiling a custom kernel (that I *really* do not want to do)? Thank you so much, Andrew Hull

3 6

CSGFS repository not up-to-date?
by Jay Leafey 09 Nov '06

09 Nov '06

Let me QUICKLY say I'm not complaining here, but is the csgfs repository not being actively maintained? The Red Hat ftp site has much newer versions available than what is currently in the CentOS csgfs repo, at least for the kernel modules. Should I just go ahead and rebuild them from the SRPMs myself, or is this an unintended condition? This has been holding me up from upgrading to the -4.0.3 kernel. It's not a critical problem, but I'd like to keep current if possible. Thanks! -- Jay Leafey - Memphis, TN jay.leafey(a)mindless.com

2 3

USB disk dropping out under light load
by Simen Thoresen 09 Nov '06

09 Nov '06

Hi all, I'm running a pretty updated CentOS4 x86_64 server (Still on kernel 2.6.9-42.0.2, but appart from that fully up to date against the official repos) with a USB-disk attached (the USB-disk is a 750G Seagate disk in a Seagate enclosure) over a USB hub. I've noticed several times that after longish periods of activity, the disk drops out (log from last time, below). In this case, the disk activity was generated by running two bittorrent-clients (ie random access r/w patterns) fed by an 2Mbps connection (ie ~200kB/s datarate). I've been able to use the drive for copying multi-GB file-trees from the main disks (it's part of a backup project), so the failure below seems strange, and not related to traffic. Nov 9 01:09:45 kasse kernel: SCSI error : <12 0 0 0> return code = 0x70000 Nov 9 01:09:45 kasse kernel: end_request: I/O error, dev sdg, sector 37463 Nov 9 01:10:34 kasse kernel: SCSI error : <12 0 0 0> return code = 0x6000000 Nov 9 01:10:34 kasse kernel: end_request: I/O error, dev sdg, sector 37471 Nov 9 01:10:40 kasse kernel: SCSI error : <12 0 0 0> return code = 0x70000 Nov 9 01:10:40 kasse kernel: end_request: I/O error, dev sdg, sector 37479 Nov 9 01:13:08 kasse kernel: SCSI error : <12 0 0 0> return code = 0x70000 Nov 9 01:13:08 kasse kernel: end_request: I/O error, dev sdg, sector 37487 Nov 9 01:13:08 kasse kernel: Buffer I/O error on device sdg1, logical block 4678 Nov 9 01:13:08 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:13:08 kasse kernel: Aborting journal on device sdg1. Nov 9 01:13:13 kasse kernel: ext3_abort called. Nov 9 01:13:13 kasse kernel: EXT3-fs error (device sdg1): ext3_journal_start_sb: Detected aborted journal Nov 9 01:13:13 kasse kernel: Remounting filesystem read-only Nov 9 01:13:41 kasse kernel: EXT3-fs error (device sdg1) in start_transaction: Journal has aborted Nov 9 01:13:41 kasse kernel: EXT3-fs error (device sdg1) in start_transaction: Journal has aborted Nov 9 01:15:05 kasse kernel: usb 1-1.1: reset high speed USB device using address 13 Nov 9 01:15:10 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:15 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:15 kasse kernel: usb 1-1.1: device not accepting address 13, error -110 Nov 9 01:15:15 kasse kernel: usb-storage: Bus reset ended with -19 Nov 9 01:15:15 kasse kernel: scsi: Device offlined - not ready after error recovery: host 12 channel 0 id 0 lun 0 Nov 9 01:15:15 kasse kernel: SCSI error : <12 0 0 0> return code = 0x70000 Nov 9 01:15:15 kasse kernel: end_request: I/O error, dev sdg, sector 78039 Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 9747 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 12288 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 151945218 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 151945219 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: __journal_remove_journal_head: freeing b_committed_data Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to offline device Nov 9 01:15:15 kasse kernel: usb 1-1.1: USB disconnect, address 13 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to device being removed Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 1 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to device being removed Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 1025 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: scsi12 (0:0): rejecting I/O to device being removed Nov 9 01:15:15 kasse kernel: Buffer I/O error on device sdg1, logical block 1027 Nov 9 01:15:15 kasse kernel: lost page write due to I/O error on sdg1 Nov 9 01:15:15 kasse kernel: usb 1-1.1: new high speed USB device using address 14 Nov 9 01:15:15 kasse kernel: EXT3-fs error (device sdg1) in start_transaction: Journal has aborted Nov 9 01:15:16 kasse kernel: EXT3-fs error (device sdg1) in start_transaction: Journal has aborted Nov 9 01:15:20 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:26 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:26 kasse kernel: usb 1-1.1: device not accepting address 14, error -110 Nov 9 01:15:26 kasse kernel: usb 1-1.1: new high speed USB device using address 15 Nov 9 01:15:31 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:33 kasse kernel: scsi12 (0:0): rejecting I/O to dead device Nov 9 01:15:33 kasse kernel: EXT3-fs error (device sdg1): ext3_readdir: directory #2 contains a hole at offset 0 Nov 9 01:15:36 kasse kernel: usb 1-1.1: control timeout on ep0out Nov 9 01:15:36 kasse kernel: usb 1-1.1: device not accepting address 15, error -110 Nov 9 01:15:53 kasse kernel: scsi12 (0:0): rejecting I/O to dead device Nov 9 01:15:53 kasse kernel: EXT3-fs error (device sdg1): ext3_readdir: directory #2 contains a hole at offset 0 Nov 9 01:16:13 kasse kernel: scsi12 (0:0): rejecting I/O to dead device Nov 9 01:16:13 kasse kernel: EXT3-fs error (device sdg1): ext3_readdir: directory #2 contains a hole at offset 0 (and multipler lines like this until the partition is unmounted). After repowering the disk again, it seems happy, and fsck passes without comments, and restarting the torrent-clients works well, so the data on the disk is at least reasonably intact. Does anyone here have similar experiences or does anyone use USB-disks for any extended period of time? Yours, -S -- Simen Thoresen, Dolphin ICS

2 1

unionfs and centos 4.4
by beast 09 Nov '06

09 Nov '06

I have tried to create a livecd from Centos 4.4, it require to compile unionfs as a module. I'm using Centos kernel source kernel-2.6.9-42.EL.src.rpm and unionfs v1.1.5 but its giving error while compiling. <http://mirror.linux.duke.edu/pub/centos/4.4/os/SRPMS/kernel-2.6.9-42.EL.src…> Is anyone having success story building centos livecd from scratch? --beast

2 2

request for optimum setup configuration
by Raghavendra Moktali 09 Nov '06

09 Nov '06

hi, I am required to take text/doc files uploaded to a share/directory in a static ip, do some processing on this queue, convert the file format and save the results in a directory for it to be downloaded (or I could upload the same to another share/folder in another static ip). volume of files is about 1-5 files/second of about 50KB to 100KB each and the converting and delivery has to be in near real time. The actual conversion is on external systems on a seperate subnet and this planned server is for just handling the input and output automatically. I do not know yet if i can use a vpn as the server that provides the data allows this or not. I had planned to put up a centos 4.4 based secure ftp server with two diretories one for incomming files and other for completed, both password protected. the access to the directory will be limited to the ip addresses that are using this facility with iptables. Static IP | Firewall------(public ftp) | (private network 192.168.xx)doing the actual sork | could someone with more experience than me (read newbie) comment or suggest a better approach than the one above or point out security issues as the data must be secured at all costs. Thanks for your time. -- rm

1 0

unattended fsck on boot
by Mark Quitoriano 09 Nov '06

09 Nov '06

Hi how can i do this? i have a headless server that i want to do fsck but i know fsck need human intervention how can i make fsck to select yes in all questions. -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

7 8

Problems with yum/rpm and %pre scriptlet error 255
by James B. Byrne 08 Nov '06

08 Nov '06

I am running xen (2.6.16-xen3_86.1_rhel4.1) on top of a stock CentOS-4.4 installation. I have not added any additional virtual machines however. When trying to install (as root) acrobat reader 7 for Linux from the adobe rpm (AdobeReader_enu.i386 7.0.8-1) I get the following errors: error: %pre(AdobeReader_enu-7.0.8-1.i386) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping AdobeReader_enu-7.0.8-1 This occurs whether I use yum or rpm directly to effect installation and whether or not setenforce is 0 or 1 for SELinux. I have looked for similar errors on google but none of the remedies that I have found there seem to work (turning selinux off, using rpm --replacepackages --replacefiles options). Does anyone here have any ideas that they care to share regarding what is likely the problem or how to fix it? Sincerely, -- James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 3

noarch concerns? dangers?
by R Lists06 08 Nov '06

08 Nov '06

Please share some wisdom from the list... :-) Realistically there is some type of difference between an rpm made for an arch (like i386 or x86_64 etc) vrs an rpm with noarch I was just looking at and downloaded these two from dag perl-Archive-Tar-1.30-1.el4.rf.noarch.rpm perl-IO-Zlib-1.04-1.2.el4.rf.noarch.rpm they are the latest and are not assigned to an architecture there are older rpms of the same that are assigned an arch like i386 what concerns should I be aware of if any when considering installing these? Or should I just choose an older one with i386 etc architecture in mind? Unit to install on is production internet mail and web server etc Thanks and kind regards! - rh -- Robert - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

2 1

CentOS-announce Digest, Vol 21, Issue 4
by centos-announce-request＠centos.org 08 Nov '06

08 Nov '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0730-01: Important CentOS 2 i386 php security update (John Newbigin) 2. CESA-2006:0727 Moderate CentOS 3 ia64 texinfo - security update (Pasi Pirhonen) 3. CESA-2006:0727 Moderate CentOS 3 s390(x) texinfo - security update (Pasi Pirhonen) 4. CESA-2006:0727-1 Moderate CentOS 3 ia64 texinfo - security update (Pasi Pirhonen) 5. CESA-2006:0727-1 Moderate CentOS 4 ia64 texinfo - security update (Pasi Pirhonen) 6. CESA-2006:0727-1 Moderate CentOS 4 s390(x) texinfo - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 08 Nov 2006 09:35:30 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0730-01: Important CentOS 2 i386 php security update To: centos-announce(a)centos.org Message-ID: <45510A32.2070106(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0730-01 Important: php security update Files available: php-4.1.2-2.13.i386.rpm php-devel-4.1.2-2.13.i386.rpm php-imap-4.1.2-2.13.i386.rpm php-ldap-4.1.2-2.13.i386.rpm php-manual-4.1.2-2.13.i386.rpm php-mysql-4.1.2-2.13.i386.rpm php-odbc-4.1.2-2.13.i386.rpm php-pgsql-4.1.2-2.13.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Wed, 8 Nov 2006 14:34:47 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0727 Moderate CentOS 3 ia64 texinfo - security update To: centos-announce(a)centos.org Message-ID: <20061108123447.GH30294(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0730 https://rhn.redhat.com/errata/RHSA-2006-0730.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/info-4.5-3.el3.1.ia64.rpm updates/ia64/RPMS/texinfo-4.5-3.el3.1.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

RE: [CentOS] Problems with LTO-3 and U320 on Centos 4.4
by Plant, Dean 08 Nov '06

08 Nov '06

Joshua Baker-LePain wrote: > On Tue, 7 Nov 2006 at 12:39pm, Plant, Dean wrote > >> I am currently testing an Overland Tape storage unit with a LTO-3 >> drive on CentOS 4.4. After a random amount of time but usually when >> we have backed up about 0.5-1TB we get scsi errors which cause the >> backup to fail. I have rebuilt the box with Solaris 10 x86 and >> Windoze to prove the hardware and have successfully backed up over >> 3TB on each OS without error. >> >> Can anyone offer advice on how to find out what is causing the error >> in CentOS. > > Your best bet to track down exactly what those errors mean would be to > head over to the linux-scsi list. But I can tell you that I've been > using an Overland LTO3 library on centos-4 for over a year now with > very good results. The 2 main differences are that I'm using an > x86_64 server (I doubt that makes much difference) and an LSI 21320 > HBA. I have had nothing but good luck with LSI adapters, and I think > it'd be worth it for you to give one a shot. > > I will say this, though. If you plan on ever using 2 drives in the > library, get the 22320, which has 2 external channels. I've been > tearing my hair out trying to get both drives in my library to write > at full speed at the same time, and no matter what driver tweaks I > make, I just can't get it to go. My 22320 arrives today, and I'm > rather hoping that'll fix the problem. Thanks for your reply, I think ill try the LSI adapter, as your setup seems very similar. Just out of curiosity what sort of backup speeds do you get to a single LTO3 drive?. I seem to struggle to get anything above 60-70MB/s. Dean.

5 7

best repo for perl-IO-Zlib perl-Archive-Tar
by R Lists06 08 Nov '06

08 Nov '06

With all due respect to the various people, their hard work and associated repos, where is the best place to do a yum install for these two packages below in regards to an internet facing production Centos 4.4 server perl-IO-Zlib perl-Archive-Tar I noticed dag and karan repos appear to have it and my experience and research tells me that using CPAN is not an option for possible problems at times (no disrespect intended) background: spamassassin and sa-update sa-update complains about Can't locate Archive/Tar.pm in @INC etc etc blah research showed that it *appears* they are in fedora core "core" yet evidentally not in the upstream "core"??? thanks and kind regards, - rh -- Robert - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

3 2

Openssh and CentOS
by Denis Machard 08 Nov '06

08 Nov '06

I would like to know why the version of openssh used in Centos4.4 is based on version 3.9p1 but not on a more recent version of openssh? The vulnerabilities found and corrected in the last version of openssh are also corrected in version 3.9?

3 3

RE: [CentOS] Mirroring CentOS problem.
by Mark Schoonover 08 Nov '06

08 Nov '06

S.C.A. S.r.l. wrote: > I have two servers that, one time in a week, make a mirror o CentOS > distribution, the mirroring come from two different italian servers > but all the mirrors process stops with this message: > > sent 267 bytes received 374865 bytes 44133.18 bytes/sec > total size is 6472762072 speedup is 17254.63 > rsync error: some files could not be transferred (code 23) at > main.c(1146) > > What's the problem? > Ps excuse me for my english. > > Regards > Amedeo Fragai > S.C.A. S.r.l. Amedeo, Don't worry about your English, it's way better than my Italian! :) There are several reasons to get a code 23 error with rsync. One of them being disappearing files. You might have temp files that get into the rsync filelist before rsync transfers files. Once rsync starts transferring the files, and if any of those files are now gone from the filesystem, rsync will generate the code 23 error. Do you log the output from rsync?? That could give you more information as to the exact problem. HTH Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816 "Stop the Earth!! I want off!!"

3 2

Problem rkhunter v. 1.2.8 - CENTOS 4
by Adriano Frare 08 Nov '06

08 Nov '06

Dear Friends, I am using CENTOS 4.3 - kernel 2.6.9-42.0.2.EL with rkhunter version 1.2.8, but the rkhunter program show me problem on file /bin/kill. I compare files /bin/kill with other CENTOS 4 and it has same size. ====================== SHOE LOG =========================== Rootkit Hunter 1.2.8 is running Mon, 30 Oct 2006 12:56:44 -0200 Determining OS... Ready Checking binaries * Selftests Strings (command) [ OK ] * System tools Info: prelinked files found Performing 'known good' check... /bin/cat [ OK ] /bin/chmod [ OK ] /bin/chown [ OK ] /bin/date [ OK ] /bin/dmesg [ OK ] /bin/env [ OK ] /bin/grep [ OK ] /bin/kill [ BAD ] /bin/login [ OK ] /bin/ls [ OK ] /bin/more [ OK ] /bin/mount [ OK ] /bin/netstat [ OK ] /bin/ps [ OK ] /bin/su [ OK ] =========================================================== I guess problem is rkhunter. Thanks for help. Adriano Frare

4 5

Update icon cache
by Michael Velez 07 Nov '06

07 Nov '06

Hello all, How can I update the icon cache in /usr/share/icons/gnome? I tried gtk-update-icon-cache but the command is not found. Thanks, Michael

2 5

RE: [CentOS] Desktop cleared after reboot through VNC
by Craig White 07 Nov '06

07 Nov '06

On Tue, 2006-11-07 at 13:58 -0500, Michael Velez wrote: > > On Tuesday 07 November 2006 03:18, Michael Velez wrote: > > > I guess I corrupted the desktop when I rebooted through VNC > > but I don't know > > > how to get it back. > > > > > > Is there a way of retrieving this without having to delete > > this user and > > > creating a new one? > > > > Guessing sucks. Always try to figure out what's going on! > > Leaving this unknown > > can only lead to trouble down the road - it's always better > > to spend some > > time and find out whassup. You'll find out something bad has > > happened, or > > you'll learn how to better identify if something bad is > > happening later. > > Either way, you're ahead! > > > > Different WM have different locations for Desktop. KDE's > > desktop is usually in > > ~/Desktop. Check out that folder. > > > > If you really think corruption is in order, you might want to > > check your > > entire f/s with e2fsck: > > > > # shutdown -Fr now; > > > > Otherwise, you might have to recover from backups. (you DO > > have backups, > > right?) > > > > Actually, when I meant I corrupted the desktop, I didn't mean at a disk > level. I doubt e2fsck will fix this (although I'll run it anyway, you never > know). The reboot was proper; however, it was done through VNC which seems > to have caused a different chain of events when closing the gnome-session. > This is what I'm trying to figure out. > > As I mentioned in my previous e-mail all my *.desktop files are in my > ~/Desktop directory. They just do not appear on the desktop when I open my > gnome session. The session starts everything else (start menus, taskbar, > startup applications - i.e. xclock) it's just my desktop that has become one > solid color (dark blue) with no icons. I can log in fine with other > userid's and receive a good desktop, so this really has something to do with > my user profile. > > At this point, I'm trying to figure out how a reboot through VNC could have > made my gnome-session close improperly. > > I don't know enough about gnome-sessions to figure this out myself. Is > there a file in the gnome profile that has desktop information (other than > ~/Desktop)? > > I've had to use VNC a lot lately so I have seen this once before. I > couldn't figure it out and I just deleted the user, created a new one, and > re-installed user files from backup (which I have a wazoo of; I have more > automated backup than a home environment actually needs). My next e2fsck > after that did not mention a corruption so it really has to be something in > my profile files. ---- ~/Desktop is the objects on your desktop (files / folders / etc.) your settings are typically stored in ~/.gnome or ~/.gnome2 or ~/.gconf try moving them... mv .gnome .gnome-bak one at a time and then log in again and see what works. Moving them rather than deleting them allows you to recover settings that you might want to keep Craig

2 1

gnbd vs drbd
by Rodrigo Barbosa 07 Nov '06

07 Nov '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Up until now, I have been using drbd for file custers with great success. Yes, it is a PITA, and sometimes you can get annoying sincronization issues (mostly on lab situations). Now I have been considering giving gnbd (with cs/gfs) a try. Do any of you ever crossed this path ? Any comparisons or comments ? TIA, - -- Rodrigo Barbosa "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFFT/Z1pdyWzQ5b5ckRAiXlAJ9gAJNtx7amdZJ2gKfAsxmRSCm/zwCfYy9D zr7kN3JjBz1HY/5zgT0ylq8= =6FOA -----END PGP SIGNATURE-----

4 6

Desktop cleared after reboot through VNC
by Michael Velez 07 Nov '06

07 Nov '06

Hello all, After issuing the reboot command on my CentOS server while being logged in through VNC and after the machine has actually rebooted, I get a blank desktop (no icons and not my default wall paper) when logging into X, whether I'm on the console or logging in through VNC. If I go into my Desktop folder in my home directory, I see all the appropriate .desktop files (but I don't see the icons on my actual desktop). When I go to the Preferences->Desktop menu, the desktop preferences application hangs. My toolbars, and default xclock at startup are all there, it's just that my desktop is a solid blue wallpaper (not my default CentOS wallpaper) and I have no icons on it. I guess I corrupted the desktop when I rebooted through VNC but I don't know how to get it back. Is there a way of retrieving this without having to delete this user and creating a new one? Thanks, Michael

2 2

CentOS-announce Digest, Vol 21, Issue 3
by centos-announce-request＠centos.org 07 Nov '06

07 Nov '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0730 Important CentOS 3 i386 php - security update (Tru Huynh) 2. CESA-2006:0730 Important CentOS 3 x86_64 php - security update (Tru Huynh) 3. CESA-2006:0730 Important CentOS 3 s390(x) php - security update (Pasi Pirhonen) 4. CESA-2006:0730 Important CentOS 4 s390(x) php - security update (Pasi Pirhonen) 5. CESA-2006:0730 Important CentOS 3 ia64 php - security update (Pasi Pirhonen) 6. CESA-2006:0730 Important CentOS 4 ia64 php - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Tue, 7 Nov 2006 11:23:30 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2006:0730 Important CentOS 3 i386 php - security update To: centos-announce(a)centos.org Message-ID: <20061107102330.GA16571(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2006:0730 php security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2006-0730.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/php-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-devel-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-imap-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-ldap-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-mysql-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-odbc-4.3.2-37.ent.i386.rpm updates/i386/RPMS/php-pgsql-4.3.2-37.ent.i386.rpm source: updates/SRPMS/php-4.3.2-37.ent.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update php\* Tr -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

Segmentation fault on LVM
by C. L. Martinez 07 Nov '06

07 Nov '06

Hi all, I have installed rhcs on a CentOS 4.4 server with clvmd. When server reboots display a segmentation fault on line 504 in /etc/rc.d/rc.sysinit file, here: if [ -x /sbin/lvm.static ]; then 500 if /sbin/lvm.static vgscan --mknodes --ignorelockingfailure > /dev/null 2>&1 ; then 501 action $"Setting up Logical Volume Management:" /sbin/lvm.static vgchange -a y --ignorelockingfailure 502 fi 503 fi 504 fi I don't use lvm on root filesystem, only on a gfs volumes: [root@keops RPMS]# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda1 5.8G 791M 4.7G 15% / none 379M 0 379M 0% /dev/shm /dev/mapper/gfsvol01-cludatavol01 64G 357M 63G 1% /gfsdata Why?? On a RHEL 4 U4 AS, this error doesn't occur .... My lvm packages are: [root@keops RPMS]# rpm -qa |grep lvm |sort lvm2-2.02.06-6.0.RHEL4 lvm2-cluster-2.02.06-7.0.RHEL4 Can somebody help me?? Many thanks.

2 2

Fwd: Warning: Kernel/Config.pm isn't writable! -- OTRS error -CENTOS 4.4
by Indunil Jayasooriya 07 Nov '06

07 Nov '06

Hi, I am trying to install OTRS on centos 4.4. I keep getting Warning: Kernel/Config.pm isn't writable! when i try to run the installer. I have done chmod 777 on the Config.pm file etc but still it will not work. I also did "chown Config.pm apache" and that did not work either. Please can someone help me. This looks like a simple issue which i cannot able to solve. below is the error. Warning: Kernel/Config.pm isn't writable! *Comment:* If you want to use the installer, set the Kernel/Config.pm writable for the werserver user! -- Thank you Indunil Jayasooriya -- Thank you Indunil Jayasooriya

2 1

files in a directory limitation
by Jerry Geis 07 Nov '06

07 Nov '06

Just curious but is there a limitation on the number of files in a directory? I am using ext3. I'm not concerned about file size just the number of files. Thanks, Jerry

9 14

Mirroring CentOS problem.
by S.C.A. S.r.l. 07 Nov '06

07 Nov '06

I have two servers that, one time in a week, make a mirror o CentOS distribution, the mirroring come from two different italian servers but all the mirrors process stops with this message: sent 267 bytes received 374865 bytes 44133.18 bytes/sec total size is 6472762072 speedup is 17254.63 rsync error: some files could not be transferred (code 23) at main.c(1146) What's the problem? Ps excuse me for my english. Regards Amedeo Fragai S.C.A. S.r.l.

1 0

Beagled on CentOS 4.4?
by Steve Bergman 07 Nov '06

07 Nov '06

I'm needing a way to full text index a bunch of pdfs so that I can search them from a web front end. Beagle would be ideal. Unfortunately (or fortunately, depending upon your viewpoint), mono, and mono apps, will likely never see the light of day in RHEL. I'm looking for the most straightforward way to get beagle installed. I don't need the gnome gui, just beaglelib, beagled, and beagle-query. rpmforge has an old version of mono (1.0.6). But no beagle. I could try with the FC6 SRPMS, but something tells me I'd run into problems, so I figured I'd ask here first. Thanks

2 1

Problems with LTO-3 and U320 on Centos 4.4
by Plant, Dean 07 Nov '06

07 Nov '06

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find out what is causing the error in CentOS. Thanks Dean # cat /proc/scsi/aic79xx/0 Adaptec AIC79xx driver version: 1.3.11 Adaptec 29320ALP Ultra320 SCSI adapter aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs Allocated SCBs: 4, SG List Length: 128 Serial EEPROM: 0x1349 0x1fc8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x1fc8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x09f4 0x0142 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0430 0xbf74 Target 0 Negotiation Settings User: 160.000MB/s transfers (80.000MHz DT|QAS, 16bit) Target 1 Negotiation Settings User: 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit) Goal: 320.000MB/s transfers (160.000MHz DT|IU|RTI, 16bit) Curr: 320.000MB/s transfers (160.000MHz DT|IU|RTI, 16bit) Transmission Errors 0 Channel A Target 1 Lun 0 Settings Commands Queued 284 Commands Active 0 Command Openings 4 Max Tagged Openings 4 Device Queue Frozen Count 0 Channel A Target 1 Lun 1 Settings Commands Queued 256 Commands Active 0 Command Openings 4 Max Tagged Openings 4 Device Queue Frozen Count 0 Errors from /var/log/messages on Centos 4.4. Oct 30 22:02:13 gannet kernel: scsi0: Transmission error detected Oct 30 22:02:13 gannet kernel: LQISTAT1[0x9] LASTPHASE[0x1] SCSISIGI[0x20] PERRDIAG[0x24] Oct 30 22:02:13 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 30 22:02:13 gannet kernel: scsi0: Dumping Card State at program address 0x21a Mode 0x0 Oct 30 22:02:13 gannet kernel: Card was paused Oct 30 22:02:13 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 30 22:02:13 gannet kernel: DFFSTAT[0x24] SCSISIGI[0x35] SCSIPHASE[0x1] SCSIBUS[0x0] Oct 30 22:02:13 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 30 22:02:13 gannet kernel: SEQINTCTL[0xe] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 30 22:02:13 gannet kernel: SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x80] PERRDIAG[0x0] Oct 30 22:02:13 gannet kernel: SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] Oct 30 22:02:13 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 30 22:02:13 gannet kernel: Oct 30 22:02:13 gannet kernel: SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 30 22:02:13 gannet kernel: qinstart = 28205 qinfifonext = 28205 Oct 30 22:02:13 gannet kernel: QINFIFO: Oct 30 22:02:13 gannet kernel: WAITING_TID_QUEUES: Oct 30 22:02:13 gannet kernel: Pending list: Oct 30 22:02:13 gannet kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 30 22:02:13 gannet kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 30 22:02:13 gannet kernel: Total 2 Oct 30 22:02:13 gannet kernel: Kernel Free SCB list: 1 0 Oct 30 22:02:13 gannet kernel: Sequencer Complete DMA-inprog list: Oct 30 22:02:13 gannet kernel: Sequencer Complete list: Oct 30 22:02:13 gannet kernel: Sequencer DMA-Up and Complete list: Oct 30 22:02:13 gannet kernel: Oct 30 22:02:13 gannet kernel: scsi0: FIFO0 Active, LONGJMP == 0x824c, SCB 0x3 Oct 30 22:02:13 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x48] DFCNTRL[0x0] DFSTATUS[0x88] Oct 30 22:02:13 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 30 22:02:13 gannet kernel: SOFFCNT[0x6] MDFFSTAT[0x40] SHADDR = 0x020, SHCNT = 0xffffe0 Oct 30 22:02:13 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 30 22:02:13 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 30 22:02:13 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 30 22:02:13 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 30 22:02:13 gannet kernel: SOFFCNT[0x6] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 30 22:02:13 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 30 22:02:13 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 30 22:02:13 gannet kernel: scsi0: LQISTATE = 0x2c, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 30 22:02:13 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 30 22:02:13 gannet kernel: SIMODE0[0xc] Oct 30 22:02:13 gannet kernel: CCSCBCTL[0x4] Oct 30 22:02:13 gannet kernel: scsi0: REG0 == 0xea60, SINDEX = 0x104, DINDEX = 0x104 Oct 30 22:02:13 gannet kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0xffd2 Oct 30 22:02:13 gannet kernel: CDB 0 0 0 0 0 0 Oct 30 22:02:13 gannet kernel: STACK: 0x12 0xe 0x0 0x0 0x0 0x0 0x0 0x0 Oct 30 22:02:13 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 30 22:02:13 gannet kernel: DevQ(0:1:0): 0 waiting Oct 30 22:02:13 gannet kernel: DevQ(0:1:1): 0 waiting Oct 30 22:02:13 gannet kernel: scsi0: Gross protocol error during incoming packet. lqistat1 == 0x9. Resetting bus. Oct 30 22:02:13 gannet kernel: scsi0: Invalid Sequencer interrupt occurred. Oct 30 22:02:13 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 30 22:02:13 gannet kernel: scsi0: Dumping Card State at program address 0x211 Mode 0x0 Oct 30 22:02:13 gannet kernel: Card was paused Oct 30 22:02:13 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 30 22:02:13 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 30 22:02:13 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 30 22:02:13 gannet kernel: SEQINTCTL[0x6] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 30 22:02:13 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 30 22:02:13 gannet kernel: SIMODE1[0x84] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 30 22:02:13 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 30 22:02:13 gannet kernel: Oct 30 22:02:13 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 30 22:02:13 gannet kernel: qinstart = 28205 qinfifonext = 28205 Oct 30 22:02:13 gannet kernel: QINFIFO: Oct 30 22:02:13 gannet kernel: WAITING_TID_QUEUES: Oct 30 22:02:13 gannet kernel: Pending list: Oct 30 22:02:13 gannet kernel: Total 0 Oct 30 22:02:13 gannet kernel: Kernel Free SCB list: 3 2 1 0 Oct 30 22:02:13 gannet kernel: Sequencer Complete DMA-inprog list: Oct 30 22:02:13 gannet kernel: Sequencer Complete list: Oct 30 22:02:13 gannet kernel: Sequencer DMA-Up and Complete list: Oct 30 22:02:13 gannet kernel: Oct 30 22:02:13 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 30 22:02:13 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 30 22:02:13 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 30 22:02:13 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 30 22:02:13 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 30 22:02:13 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 30 22:02:13 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 30 22:02:13 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 30 22:02:13 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 30 22:02:13 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 30 22:02:13 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 30 22:02:13 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 30 22:02:13 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 30 22:02:13 gannet kernel: SIMODE0[0xc] Oct 30 22:02:13 gannet kernel: CCSCBCTL[0x4] Oct 30 22:02:13 gannet kernel: scsi0: REG0 == 0xea60, SINDEX = 0x104, DINDEX = 0x104 Oct 30 22:02:13 gannet kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0xffd2 Oct 30 22:02:13 gannet kernel: CDB 0 0 0 0 0 0 Oct 30 22:02:13 gannet kernel: STACK: 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 30 22:02:13 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 30 22:02:13 gannet kernel: DevQ(0:1:0): 0 waiting Oct 30 22:02:13 gannet kernel: DevQ(0:1:1): 0 waiting Oct 30 22:02:13 gannet kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Oct 31 01:55:31 gannet kernel: scsi0:0:1:1: Attempting to abort cmd d0a66080: 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:31 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:55:31 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:55:31 gannet kernel: scsi0: Dumping Card State at program address 0x24 Mode 0x22 Oct 31 01:55:31 gannet kernel: Card was paused Oct 31 01:55:31 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:55:31 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:55:31 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:55:31 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:55:31 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:55:31 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:55:31 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:55:31 gannet kernel: Oct 31 01:55:31 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:55:31 gannet kernel: qinstart = 28205 qinfifonext = 28207 Oct 31 01:55:31 gannet kernel: QINFIFO: 0x3 0x2 Oct 31 01:55:31 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:55:31 gannet kernel: Pending list: Oct 31 01:55:31 gannet kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:31 gannet kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:31 gannet kernel: Total 2 Oct 31 01:55:31 gannet kernel: Kernel Free SCB list: 1 0 Oct 31 01:55:31 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:55:31 gannet kernel: Sequencer Complete list: Oct 31 01:55:31 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:55:31 gannet kernel: Oct 31 01:55:31 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:55:31 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:31 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:31 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:31 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:31 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:55:31 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:31 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:31 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:31 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:31 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:55:31 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:55:31 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:55:31 gannet kernel: SIMODE0[0xc] Oct 31 01:55:31 gannet kernel: CCSCBCTL[0x4] Oct 31 01:55:31 gannet kernel: scsi0: REG0 == 0x2, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:55:31 gannet kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0xffd2 Oct 31 01:55:31 gannet kernel: CDB 0 0 0 0 0 0 Oct 31 01:55:31 gannet kernel: STACK: 0x10 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:31 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:55:31 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:55:31 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:55:31 gannet kernel: scsi0:0:1:1: Cmd aborted from QINFIFO Oct 31 01:55:41 gannet kernel: scsi0:0:1:1: Attempting to abort cmd d0a66080: 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:41 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:55:41 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:55:41 gannet kernel: scsi0: Dumping Card State at program address 0x1d Mode 0x33 Oct 31 01:55:41 gannet kernel: Card was paused Oct 31 01:55:41 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:55:41 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:55:41 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:55:41 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:55:41 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:55:41 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:55:41 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:55:41 gannet kernel: Oct 31 01:55:41 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:55:41 gannet kernel: qinstart = 28205 qinfifonext = 28207 Oct 31 01:55:41 gannet kernel: QINFIFO: 0x3 0x2 Oct 31 01:55:41 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:55:41 gannet kernel: Pending list: Oct 31 01:55:41 gannet kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:41 gannet kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:41 gannet kernel: Total 2 Oct 31 01:55:41 gannet kernel: Kernel Free SCB list: 1 0 Oct 31 01:55:41 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:55:41 gannet kernel: Sequencer Complete list: Oct 31 01:55:41 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:55:41 gannet kernel: Oct 31 01:55:41 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:55:41 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:41 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:41 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:41 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:41 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:55:41 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:41 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:41 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:41 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:41 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:55:41 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:55:41 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:55:41 gannet kernel: SIMODE0[0xc] Oct 31 01:55:41 gannet kernel: CCSCBCTL[0x4] Oct 31 01:55:41 gannet kernel: scsi0: REG0 == 0x2, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:55:41 gannet kernel: scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffd2 Oct 31 01:55:41 gannet kernel: CDB a 1 0 0 38 0 Oct 31 01:55:41 gannet kernel: STACK: 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:41 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:55:41 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:55:41 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:55:41 gannet kernel: scsi0:0:1:1: Cmd aborted from QINFIFO Oct 31 01:55:41 gannet kernel: scsi0:0:1:0: Attempting to abort cmd e2c06c80: 0x1 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:41 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:55:41 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:55:41 gannet kernel: scsi0: Dumping Card State at program address 0x27 Mode 0x22 Oct 31 01:55:41 gannet kernel: Card was paused Oct 31 01:55:41 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:55:41 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:55:42 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:55:42 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:55:42 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:55:42 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:55:42 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:55:42 gannet kernel: Oct 31 01:55:42 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:55:42 gannet kernel: qinstart = 28205 qinfifonext = 28206 Oct 31 01:55:42 gannet kernel: QINFIFO: 0x3 Oct 31 01:55:42 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:55:42 gannet kernel: Pending list: Oct 31 01:55:42 gannet kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:42 gannet kernel: Total 1 Oct 31 01:55:42 gannet kernel: Kernel Free SCB list: 2 1 0 Oct 31 01:55:42 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:55:42 gannet kernel: Sequencer Complete list: Oct 31 01:55:42 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:55:42 gannet kernel: Oct 31 01:55:42 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:55:42 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:42 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:42 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:42 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:42 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:55:42 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:42 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:42 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:42 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:42 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:55:42 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:55:42 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:55:42 gannet kernel: SIMODE0[0xc] Oct 31 01:55:42 gannet kernel: CCSCBCTL[0x4] Oct 31 01:55:42 gannet kernel: scsi0: REG0 == 0x2, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:55:42 gannet kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0xffd2 Oct 31 01:55:42 gannet kernel: CDB 0 0 0 0 0 0 Oct 31 01:55:42 gannet kernel: STACK: 0x10 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:42 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:55:42 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:55:42 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:55:42 gannet kernel: scsi0:0:1:0: Cmd aborted from QINFIFO Oct 31 01:55:51 gannet kernel: scsi0:0:1:0: Attempting to abort cmd e2c06c80: 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:51 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:55:51 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:55:51 gannet kernel: scsi0: Dumping Card State at program address 0x1d Mode 0x33 Oct 31 01:55:51 gannet kernel: Card was paused Oct 31 01:55:51 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:55:51 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:55:51 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:55:51 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:55:51 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:55:51 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:55:51 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:55:51 gannet kernel: Oct 31 01:55:51 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:55:51 gannet kernel: qinstart = 28205 qinfifonext = 28206 Oct 31 01:55:51 gannet kernel: QINFIFO: 0x3 Oct 31 01:55:51 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:55:51 gannet kernel: Pending list: Oct 31 01:55:51 gannet kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:55:51 gannet kernel: Total 1 Oct 31 01:55:51 gannet kernel: Kernel Free SCB list: 2 1 0 Oct 31 01:55:51 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:55:51 gannet kernel: Sequencer Complete list: Oct 31 01:55:51 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:55:51 gannet kernel: Oct 31 01:55:51 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:55:51 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:51 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:51 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:51 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:51 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:55:51 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:55:51 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:55:51 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:55:51 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:55:51 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:55:51 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:55:51 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:55:51 gannet kernel: SIMODE0[0xc] Oct 31 01:55:51 gannet kernel: CCSCBCTL[0x4] Oct 31 01:55:51 gannet kernel: scsi0: REG0 == 0x2, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:55:51 gannet kernel: scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffd2 Oct 31 01:55:51 gannet kernel: CDB a 1 0 0 38 0 Oct 31 01:55:51 gannet kernel: STACK: 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:55:51 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:55:51 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:55:51 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:55:51 gannet kernel: scsi0:0:1:0: Cmd aborted from QINFIFO Oct 31 01:55:51 gannet kernel: Recovery code sleeping Oct 31 01:55:56 gannet kernel: Recovery code awake Oct 31 01:55:56 gannet kernel: Timer Expired Oct 31 01:55:56 gannet kernel: scsi0: Device reset returning 0x2003 Oct 31 01:55:56 gannet kernel: Recovery code sleeping Oct 31 01:56:01 gannet kernel: Recovery code awake Oct 31 01:56:01 gannet kernel: Timer Expired Oct 31 01:56:01 gannet kernel: scsi0: Device reset returning 0x2003 Oct 31 01:56:01 gannet kernel: Recovery SCB completes Oct 31 01:56:01 gannet kernel: Recovery SCB completes Oct 31 01:56:21 gannet kernel: scsi0:0:1:1: Attempting to abort cmd d0a66080: 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:56:21 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:56:21 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:56:21 gannet kernel: scsi0: Dumping Card State at program address 0x1e Mode 0x0 Oct 31 01:56:21 gannet kernel: Card was paused Oct 31 01:56:21 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:56:21 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:56:21 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:56:21 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:56:21 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:56:21 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:56:21 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:56:21 gannet kernel: Oct 31 01:56:21 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:56:21 gannet kernel: qinstart = 28205 qinfifonext = 28206 Oct 31 01:56:21 gannet kernel: QINFIFO: 0x2 Oct 31 01:56:21 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:56:21 gannet kernel: Pending list: Oct 31 01:56:21 gannet kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:56:21 gannet kernel: Total 1 Oct 31 01:56:21 gannet kernel: Kernel Free SCB list: 3 1 0 Oct 31 01:56:21 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:56:21 gannet kernel: Sequencer Complete list: Oct 31 01:56:21 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:56:21 gannet kernel: Oct 31 01:56:21 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:56:21 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:56:21 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:56:21 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:56:21 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:56:21 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:56:21 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:56:21 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:56:21 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:56:21 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:56:21 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:56:21 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:56:21 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:56:21 gannet kernel: SIMODE0[0xc] Oct 31 01:56:21 gannet kernel: CCSCBCTL[0x4] Oct 31 01:56:21 gannet kernel: scsi0: REG0 == 0xea60, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:56:21 gannet kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0xffd2 Oct 31 01:56:21 gannet kernel: CDB 0 0 0 0 0 0 Oct 31 01:56:21 gannet kernel: STACK: 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:56:21 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:56:21 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:56:21 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:56:21 gannet kernel: scsi0:0:1:1: Cmd aborted from QINFIFO Oct 31 01:56:31 gannet kernel: scsi0:0:1:0: Attempting to abort cmd e2c06c80: 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:56:31 gannet kernel: scsi0: At time of recovery, card was not paused Oct 31 01:56:31 gannet kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Oct 31 01:56:31 gannet kernel: scsi0: Dumping Card State at program address 0x8 Mode 0x33 Oct 31 01:56:31 gannet kernel: Card was paused Oct 31 01:56:31 gannet kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] Oct 31 01:56:31 gannet kernel: DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] Oct 31 01:56:31 gannet kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] Oct 31 01:56:31 gannet kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] SSTAT0[0x0] Oct 31 01:56:31 gannet kernel: SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] Oct 31 01:56:31 gannet kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] Oct 31 01:56:31 gannet kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1] Oct 31 01:56:31 gannet kernel: Oct 31 01:56:31 gannet kernel: SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 Oct 31 01:56:31 gannet kernel: qinstart = 28205 qinfifonext = 28206 Oct 31 01:56:31 gannet kernel: QINFIFO: 0x2 Oct 31 01:56:31 gannet kernel: WAITING_TID_QUEUES: Oct 31 01:56:31 gannet kernel: Pending list: Oct 31 01:56:31 gannet kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x17] Oct 31 01:56:31 gannet kernel: Total 1 Oct 31 01:56:31 gannet kernel: Kernel Free SCB list: 3 1 0 Oct 31 01:56:31 gannet kernel: Sequencer Complete DMA-inprog list: Oct 31 01:56:31 gannet kernel: Sequencer Complete list: Oct 31 01:56:31 gannet kernel: Sequencer DMA-Up and Complete list: Oct 31 01:56:31 gannet kernel: Oct 31 01:56:31 gannet kernel: scsi0: FIFO0 Free, LONGJMP == 0x804c, SCB 0x3 Oct 31 01:56:31 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:56:31 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:56:31 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:56:31 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:56:31 gannet kernel: scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 Oct 31 01:56:31 gannet kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] Oct 31 01:56:31 gannet kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] Oct 31 01:56:31 gannet kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 Oct 31 01:56:31 gannet kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] Oct 31 01:56:31 gannet kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 Oct 31 01:56:31 gannet kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Oct 31 01:56:31 gannet kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 Oct 31 01:56:31 gannet kernel: SIMODE0[0xc] Oct 31 01:56:31 gannet kernel: CCSCBCTL[0x4] Oct 31 01:56:31 gannet kernel: scsi0: REG0 == 0x2, SINDEX = 0x104, DINDEX = 0x104 Oct 31 01:56:31 gannet kernel: scsi0: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffd2 Oct 31 01:56:31 gannet kernel: CDB a 1 0 0 38 0 Oct 31 01:56:31 gannet kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Oct 31 01:56:31 gannet kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Oct 31 01:56:31 gannet kernel: DevQ(0:1:0): 0 waiting Oct 31 01:56:31 gannet kernel: DevQ(0:1:1): 0 waiting Oct 31 01:56:31 gannet kernel: scsi0:0:1:0: Cmd aborted from QINFIFO Oct 31 01:56:31 gannet kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 1 lun 1 Oct 31 01:56:31 gannet kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 1 lun 0 Oct 31 01:56:31 gannet kernel: st0: Error 50000 (sugg. bt 0x0, driver bt 0x0, host bt 0x5).

2 1

pptp, ipsec and vpn
by MrKiwi 07 Nov '06

07 Nov '06

Hi All, This is a general VPN question; PPTP VPNs seem to be very easy to set up with CentOS as the VPN server and the built-in windose client, but how do list members feel about the security vunerabilities reported with the MS implementation? Specifically the 6 problems reported here : http://www.schneier.com/pptp-faq.html or maybe im being paranoid? Would any of you roll this solution out using the MS client for business use? I generally dont trust anything MS does, especially when security is concerned I feel i should be leaning towards an IPSec VPN, would anyone agree? (exchanging keys is not a problem for us) Thanks to all of you - this mailing list is fantastic :) Regards, MrKiwi

3 2

RE: [CentOS] Best backup software for linux
by Mark Schoonover 07 Nov '06

07 Nov '06

Les Mikesell wrote: > On Mon, 2006-11-06 at 14:54 -0800, Mark Schoonover wrote: > >>> Note that this only works as a backup if the original filename is >>> removed. If it is overwritten or truncated instead, all links now >>> point to the changed version. >> >> This is true if you're doing it with only filesystem tools, but this >> system is using rsync. What's happening is the cp -al occurs first >> making hardlinks that point to an hourly directory into the current >> directory, then rsync is run to update current. Because rsync will >> create a new temp file when any file changes, the original is >> deleted with it's data 'pushed' to any hardlinks pointing at the >> original file. Rsync then renames the temp file the original file >> name that has changed, therefore assuring that any hardlinks will >> always have the previous copy of any changed files. With rsync >> running in --delete mode, any files from the source server that get >> deleted, will get deleted out of current in the backup server, >> causing this cascade of hardlinks to get updated with the deleted >> files data. That's how this system can create incremental backups of >> only changed data, but with hardlinks, it looks like full backups >> are made each and every time. Really saves disk space, that's for >> sure! >> >> Hope this clears things up... > > Backuppc is even more extreme in the space savings. It first > compresses the files, then detects duplicates using an efficient > hashing scheme and links all duplicates to one pooled copy whether > they came from > the same source or not. It includes a custom rsync on the server > side that understands the compressed storage format but works with > stock versions on the remote side so you don't need any special client > software. And it has a nice web interface for browsing the backup > archive and doing restores. Sounds like a good product! Since I had plenty of terabytes of storage, having compression on the files wasn't a requirement. One of my requirements was not having a gui to configure things, or do restores. Thanks for pointing some info out on backuppc, I've never heard of it. Mark

2 1

onboard adaptec SAS RAID controller not seeing drive(s)
by Steve Finley 07 Nov '06

07 Nov '06

I have a Supermicro SuperServer 6025B-3V with their X7DB3 mobo. It has an onboard Adaptec SAS RAID controller and has been configured as a RAID1 with two Seagate Cheetah 15k.4 disks. Original attempts at installing CentOS4.4 x86_64 appeared to load the aic94xx driver, but then reported something like "No hard drives found...". I grabbed the x86_64 aacraid driver disk from Adaptec (updated 23 OCT 2006) and tried a "linux dd" install. Although the driver disk appears to load, I still get the "No hard drives found.." message. I'm waiting for a response from Supermicro, but any advice from this list (including a controller that works) would be greatly appreciated. Thanks, Steve Finley

1 0

RE: [CentOS] Best backup software for linux
by Mark Schoonover 06 Nov '06

06 Nov '06

Les Mikesell wrote: > On Mon, 2006-11-06 at 18:42 +0000, Peter Crighton wrote: > >> You wrote "Hardlinks are key to this backup strategy. Using cp -al >> creates hardlinks to files, and this simple command is what does all >> the heavy lifting for daily and weekly backups. Wikipedia has a very >> good explanation on how hardlinks work. In a nutshell, when there's a >> hardlink pointing to a file from the hourly directory, to a file in >> the current directory, and that current file gets deleted, all the >> links that point to that now deleted current file gets the file data >> 'pushed' back towards all the links. I'll have to think how to >> explain this better." >> >> Do you mean that the hourly files are written when created, the >> hardlink for the daily doesn't actually copy the file (simply makes a >> link), but if the file is set to be deleted from it's location >> (because it's gone from the server) then it is actually moved so that >> it still exists in the daily backup but is removed from the hourly? >> -- > > Think of all directory entries as links. The real entries that > map disk space to files are inodes and links are names pointing > to the inodes. There can be any number - including 0 - of links > to an inode. The space is not released for re-use until the > link count goes to 0 and no process has the file open. So hardlinks > are just multiple names pointing to the same data, and the data > doesn't go away until the last name is removed. You did much better explaining what's going on with hardlinks than I did. I'm going to have to rewrite that part of the blog a few times before it reads better. I can picture it all in my head, but describing how it works is another. >Note that this only works as a backup if the original filename is removed. If it >is overwritten or truncated instead, all links now point to the changed version. This is true if you're doing it with only filesystem tools, but this system is using rsync. What's happening is the cp -al occurs first making hardlinks that point to an hourly directory into the current directory, then rsync is run to update current. Because rsync will create a new temp file when any file changes, the original is deleted with it's data 'pushed' to any hardlinks pointing at the original file. Rsync then renames the temp file the original file name that has changed, therefore assuring that any hardlinks will always have the previous copy of any changed files. With rsync running in --delete mode, any files from the source server that get deleted, will get deleted out of current in the backup server, causing this cascade of hardlinks to get updated with the deleted files data. That's how this system can create incremental backups of only changed data, but with hardlinks, it looks like full backups are made each and every time. Really saves disk space, that's for sure! Hope this clears things up... Mark

2 1

pptp + iptables + centos
by Sherwyn Greene 06 Nov '06

06 Nov '06

Hi, All I'm tring to get a client connected to a vpn server running pptp & centos, the client connects to the server but I can't browse the internet or the local network from the client, when I stop the firewall the client can ping the server but no browsing can be done, do I need a iptables rule to allow pptp clients to use the internet or browse the network??? Sherwyn Greene Planner / I.T. Technician Project Controls Dept. Kentz-OJ's E&I Services J.V. +1 (868) 648-0876

2 1

RE: [CentOS] Best backup software for linux
by Mark Schoonover 06 Nov '06

06 Nov '06

Jeff Stacey wrote: > On Fri, 2006-03-11 at 10:28 -0800, Bbt Lists wrote: >> Mark Schoonover wrote: >>>>>>> Maybe this is something I should write up in more detail. The >>>>>>> entire system runs on just a couple of shell scripts, rsync, and >>>>>>> Perl program to mail out logs.... >>>>>>> >>>>>>> HTH >>>>>>> Mark A day late, but ran into some problems with blogspot. The article is posted at: http://marks-tech-pages.blogspot.com - titled Linux Based Poor Man's SAN. Let me know what you think! Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816 "Stop the Earth!! I want off!!"

3 2

RE: [CentOS] Best backup software for linux
by Bowie Bailey 06 Nov '06

06 Nov '06

Mark Schoonover wrote: > From: Les Mikesell [mailto:lesmikesell@gmail.com] > > On Fri, 2006-11-03 at 07:51 -0800, Mark Schoonover wrote: > > > > > > Maybe this is something I should write up in more detail. > > > > > > The entire system runs on just a couple of shell scripts, > > > > > > rsync, and Perl program to mail out logs.... > > > > > > > > > > > If you do by chance write that up, I would be interested in > > > > > seeing it. Dustin > > > My goal is to have the rough draft posted on my blog later today. > > Do you have a comparison to backuppc > (http://backuppc.sourceforge.net/)? > > No, but you can read my blog, then look at backuppc and see what the > differences are. Let us know. Sounds interesting. Where is your blog? -- Bowie

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss