- Discuss - lists.centos.org

RE: [CentOS] Problem deleting an active route
by Alex Palenschat 22 Sep '06

22 Sep '06

> The big difference between mine and yours is that the > 169.254.0.0 route > is showing up on eth0 - which is the only port connected. I > can get into > the box, but the box can not get out to anyplace. I could be > looking in > the wrong place for the solution, I figured that this looks wrong to > have this apparent self-assigned IP on my only active ethernet port. What do you mean the box cannot get out to anyplace? What apps etc. Are you certain it is not a firewall or DNS issue? What are you trying and are there any errors? Simple stuff but sometimes overlooked. alex

1 0

rgmanager Hanging at shutdown
by Sherwyn Greene 22 Sep '06

22 Sep '06

HI All I'm working on a test cluster system with two computer system, both are almost the same spec... the problem i'm having is the service I create in the services are not shown in the cluster manager tab on the cluster configuration, and when I go to reboot the systems the rgmanager service hangs and I need to push the reset button on the system to reboot. How can i fix this prob??? Thanks Sherwyn Greene Planner / I.T. Technician Project Controls Dept. Kentz-OJ's E&I Services J.V. +1 (868) 648-0876

1 0

RE: [CentOS] Hard drive errors
by Bowie Bailey 22 Sep '06

22 Sep '06

Karanbir Singh wrote: > Jordi Espasa Clofent wrote: > > > > The ideal should be to use the SmartTools utilities, but, if I'm > > right, there're problems with SATA support. > > smartctl on CentOS >= 4.3, supports SATA just fine. Sounds good. I'll give it a try. > > At least, you can boot with liveCD-util (like UltimateBootCD, for > > example) and check the HD integrity. > > why not use the CentOS-4 LiveCD ? I downloaded the CentOS-4 LiveCD last night. The system is running from the hard drives at the moment, but if it dies again, I'll try the LiveCD. -- Bowie

1 0

RE: [CentOS] Re: Hard drive errors
by Bowie Bailey 22 Sep '06

22 Sep '06

Peter Farrow wrote: > This can be caused by overheating. If the drives are mounted close > together as some chassis configurations permit, then it make sense > they may both exhibit the same problem, but not necessarily > simultaneously. > > Are this log entries adjacent to each other? The drives have an open slot between them and a 120mm fan right in front of them, so I don't think overheating is an issue. At one point, I shut the machine down and let it sit for an hour or so. The errors started back up immediately during the boot process when I turned it back on. The log entries are adjacent...usually with the exact same timestamp. There are no other errors mixed in with them. I was able to get the system to boot yesterday. It triggered a raid rebuild which finished last night. The last batch of errors happened at 4am and the system appears to be running normally now. Here's a snip from the logs showing the errors and the rebuild: (I've cut out a few columns to shorten the lines) ---------------------------------- 22:36:21 kernel: ata3: command 0x25 timeout, stat 0x50 host_stat 0x24 22:36:21 kernel: ata3: status=0x50 { DriveReady SeekComplete } 22:36:21 kernel: Current sda: sense key No Sense 22:36:21 kernel: ata4: command 0x35 timeout, stat 0x50 host_stat 0x24 22:36:21 kernel: ata4: status=0x50 { DriveReady SeekComplete } 22:36:21 kernel: Current sdb: sense key No Sense 22:37:09 kernel: ata3: command 0x25 timeout, stat 0x50 host_stat 0x24 22:37:09 kernel: ata3: status=0x50 { DriveReady SeekComplete } 22:37:09 kernel: Current sda: sense key No Sense 22:38:03 kernel: md: md1: sync done. 22:38:03 kernel: RAID1 conf printout: 22:38:03 kernel: --- wd:2 rd:2 22:38:03 kernel: disk 0, wo:0, o:1, dev:sda2 22:38:03 kernel: disk 1, wo:0, o:1, dev:sdb2 23:25:39 kernel: ata3: command 0xca timeout, stat 0x50 host_stat 0x24 23:25:39 kernel: ata3: status=0x50 { DriveReady SeekComplete } 23:25:39 kernel: Info fld=0x662270, Current sda: sense key No Sense 23:25:39 kernel: ata4: command 0xca timeout, stat 0x50 host_stat 0x24 23:25:39 kernel: ata4: status=0x50 { DriveReady SeekComplete } 23:25:39 kernel: Info fld=0x662270, Current sdb: sense key No Sense ---------------------------------- These errors are showing ata3 and ata4 because I switched the drives to different SATA connections on the MB. These are the same drives that I showed previously with errors on ata1 and ata2. -- Bowie

1 0

RE: [CentOS] Re: Hard drive errors
by Bowie Bailey 22 Sep '06

22 Sep '06

Scott Silva wrote: > Bowie Bailey spake the following on 9/21/2006 12:56 PM: > > One of my CentOS boxes has started giving me errors. The box is > > CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a > > software raid 1 configuration. > > > > The errors I see are: > > > > ata1: command 0xca timeout, stat 0x50 host_stat 0x24 > > ata1: status=0x50 { DriveReady SeekComplete } > > Info fld=0x1e22b8, Current sda: sense key No Sense > > ata2: command 0xca timeout, stat 0x50 host_stat 0x24 > > ata2: status=0x50 { DriveReady SeekComplete } > > Info fld=0x1e2598, Current sdb: sense key No Sense > > > > If it was just coming from one drive, I would say it was a bad > > drive, but this is happening on both drives. > > > > Can anyone give me a starting place to diagnose this? > > Cables? Connections? Power supply going bad? Already reseated all of the cables. I even moved the drives to two different SATA ports on the MB. Power supply...maybe, but not my first guess. I may swap it out later if I can't find any other cause. -- Bowie

1 0

Lost path to root directory!
by Ted Miller 22 Sep '06

22 Sep '06

I'll admit I am new to LVM2, but I have got myself in a bad spot. I renamed the LVM volume and volume group so that I can keep track of what is in them. I have changed grub's menu.lst, /etc/fstab, and /etc/mtab, but somewhere else there is still something telling lvm that my root drive is on VolGroup00. Where is it, and how do I convince it that VolGroup00/Volume00 (or whatever the defaults are) is now DriveC/Centos? I suspect it may be hiding in initrd (compressed). Wherever it is, it brings the boot process to a screeching halt with a kernel panic when it tries to pivot mount the root drive. Until I get this figured out, my Centos install is dead, and I am back on my old Mandrake install. Ted Miller

2 6

FreeNX on 64-bit success
by Adam Huffman 22 Sep '06

22 Sep '06

I know a few people have been asking about running FreeNX on x86_64 machines. I've just installed the i386 versions of FreeNX and NX from Extras, and the openssl.i686 package, and it seems to be running happily on an x86_64 CentOS 4.4 machine. Adam

2 2

Hard drive errors
by Bowie Bailey 22 Sep '06

22 Sep '06

One of my CentOS boxes has started giving me errors. The box is CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a software raid 1 configuration. The errors I see are: ata1: command 0xca timeout, stat 0x50 host_stat 0x24 ata1: status=0x50 { DriveReady SeekComplete } Info fld=0x1e22b8, Current sda: sense key No Sense ata2: command 0xca timeout, stat 0x50 host_stat 0x24 ata2: status=0x50 { DriveReady SeekComplete } Info fld=0x1e2598, Current sdb: sense key No Sense If it was just coming from one drive, I would say it was a bad drive, but this is happening on both drives. Can anyone give me a starting place to diagnose this? Thanks. -- Bowie

5 5

Help with dhclient.conf & vendor options
by Plant, Dean 22 Sep '06

22 Sep '06

I have a test CentOS 4.4 workstation that I am trying to configure to use vendor options from a W2003 DHCP server. A vendor class with the custom options has been created on the windoze box and I seem to be receiving the info in the vendor-encapsulated-options shown in the lease file. What I don't know is how to decode these options so that the CentOS client uses them. I have searched the web and read the man pages and come up with a configuration for the /etc/dhclient.conf but as yet I am unable to get the extra options to work and to be honest I don't fully understand how the dhclient.conf should be written. Can anyone shed some light on what I am doing wrong or missing. /var/lib/dhcp/dhclient-eth0.leases lease { interface "eth0"; fixed-address 192.168.80.10; option subnet-mask 255.255.255.0; option dhcp-lease-time 691200; option dhcp-message-type 5; option dhcp-server-identifier 192.168.80.1; option dhcp-renewal-time 345600; option dhcp-rebinding-time 604800; option vendor-encapsulated-options 28:a:70:75:62:6c:69:63:6e:65:74:0:29:8:c1:76:c0:21:c1:76:c0:18:2a:8:c1:7 6:c0:18:c1:76:c5:5e:77:1e:63:6f:6d:6d:2e:61:64:2e:72:6f:6b:65:2e:63:6f:2 e:75:6b:20:72:6f:6b:65:2e:63:6f:2e:75:6b:0; renew 1 2006/9/25 12:41:13; rebind 5 2006/9/29 10:32:59; expire 6 2006/9/30 10:32:59; } /etc/dhclient-eth0.conf send host-name "test"; send vendor-class-identifier "CentOS"; vendor option space "CentOS"; request CentOS.nis-domain; request CentOS.nis-servers; request CentOS.ntp-servers; request CentOS.domain-search-list; Thanks Dean

1 0

Install analog via src.rpm
by OXx 22 Sep '06

22 Sep '06

Hello all, I try to install analog on Centos. So I downloaded Source RPM packages at http://www.iddl.vt.edu/~jackie/analog/ But when I try : rpm --rebuild analog-6.0-1.src.rpm I have: --rebuild: option iconnue How to rebuild the RPM ? Thanks BR

1 1

Using yum variable $releasever reports 1
by Jens Ahlin 22 Sep '06

22 Sep '06

Hi, I have an old server that originally was a RedHat 8 server. Then I upgraded to RedHat 9, then Tao Linux 1 and last to CentOS 3 when tao was discontinued. Yes I know that this was probably not the smartest thing in the world but now this is the case and I don't want to reinstall it. Now the question. In yum.conf I have distroverpkg=redhat-release and cat /etc/redhat-release gives: CentOS release 3.7 (Final) But when I run yum update the release reported back is 1.0 yum update Gathering header information file(s) from server(s) Server: CentOS-1.0 - Addons Server: CentOS-1.0 - Base Until now I have manually changed yum.conf and replaced $relesever with whatever version I had but why is $relesever replaced with 1.0 ? Jens

2 2

centos-4.4 and xen?
by Michael Kress 22 Sep '06

22 Sep '06

Hi, has somebody already got xen running on centos 4.4? Does the tutorial under http://mark.foster.cc/wiki/index.php/Centos-4_on_Xen also work for version 4.4? I don't have my new server yet in order to try it (it will be delivered at the end of the week), but I'd like to read a little bit about it in advance. Thanks Michael -- Michael Kress, kress(a)hal.saar.de

1 1

How to reattach to a failed ssh session or process
by Erick Perez 22 Sep '06

22 Sep '06

Hi, is there a way to "reconnect" to a ssh session that was disconnected and left running processes in the linux server? I know that's the purpose of the screen command, but just to spread know-how, is that possible? Example: 3441 pts/0 S+ 0:00 nano /etc/httpd/conf/httpd.conf I remotely connect to a machine via ssh and started to edit apache conf and i did not used screen (me bad). The session timed out due to an internet glitch and I got disconnected. How can I reattach (speaking in screen terms) to that ssh session or gain control to the nano process (or any other)? Thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

9 12

Software versus hardware RAID performance.
by Lamar Owen 22 Sep '06

22 Sep '06

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal Software Radio Peripheral (USRP) attached USB 2.0), which has a Dell PERC 4e/Di RAID controller, two 72GB 10k U320 SCSI drives, and four 146GB 10k U320 SCSI drives. Well, during installation of a sound card (so we can actually listen to the dedispersed, phase-aligned, and detected pulsar chirp audio), something happened to the RAID firmware, so I put the PERC in SCSI-only mode and installed anyway (I needed to get the install done, and not spend a lot of time troubleshooting the RAID firmware not found message right now, as I need to demonstrate the pulsar receiver Friday evening). Ok, the two 72GB drives are set up RAID1, and the four 146GB drives are set up striped, RAID0. The two 72's are on channel 1, and the four 146's are on channel 2. Under CentOS 4 with the hardware RAID running, the four 146's (hardware RAID0) have a raw read performance of abut 150MB/s, which I thought was pretty good. Now, the box has dual 3GHz Xeons (it needs them for the pulsar dedispersion algorithm's FFT's, particularly when we refine it to do dedispersion in real-time). With FC5 installed, and the four 146's running software RAID0, I am getting nearly 240MB/s throughput (with other processes running). The box feels significantly more responsive; the GNUradio build with the PERC running in hardware RAID mode took about thirty minutes; with it running in LSI MPT SCSI mode it's taking half that time to build and install. The reason to run RAID0 instead of RAID5 is due to the ephemeral nature of the data being stored on the 146's; with the USRP, I need to record data at 32MB/s with no dropouts (1 channel, 8 megasamples per second, 12 bit samples (16 bit words), quadrature encoding (two12 bit samples (I and Q) per sampling interval); this data is then reduced post recording into just a few hundred megabytes, after dedispersion and phase processing; the need for raw sustained throughput even under load is critical. Just thought I drop this data point in. -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

2 1

sendmail security
by abhishek singh 22 Sep '06

22 Sep '06

hi all i am using sendmail mail server, i have configured SASL+TLS+MailScanner+Spamassasin+.Procmail and its working fine, but there is one problem when i am doing telnet to my server on 25 port and using "mail from " command to send mail by any user like abc(a)gmail.com or any user @mydomain then sendmail is not able to verify sending user , so plz help me how can i verify the real sender means i want only my domain real user can sendmails .and when i am using mail clients then its working fine . prolem is occuring when , when i am doing telnet directly to smtp port to my server __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

11 28

Page allocation failure and slow system
by Steve Bergman 21 Sep '06

21 Sep '06

Hi all. Every few days I am getting a message that looks like the one I have cut and pasted below. It is accompanied by a severe slowdown of the system. In fact, it's practically locked. The machine runs gnome-desktops for 40 users plus about a hundred sessions of a curses based point of sale software, plus a few other functions, so it's a busy machine. Dual Xeon 3.2GHz processors. 4096MB ram. 8192MB swap. During this period, I'm seeing lots of swapout. sar reports 266 pages per second averaged over that 10 minute period. I'm thinking that I have a runaway process, but have not been able to see one of these instances for myself at the time it is happening. I've set up a monitor to record the highest rss size process minute by minute, which should tell me more about what is happening. But I don't really understand what the message below is saying. It looks like I still have plenty of swap left, so why the page allocation failure? Thanks for any enlightenment. VM isn't my strong suit. -Steve ======= Sep 20 13:34:33 hagar kernel: metacity: page allocation failure. order:0, mode:0x50 Sep 20 13:34:33 hagar kernel: [<c0144257>] __alloc_pages+0x28b/0x29d Sep 20 13:34:33 hagar kernel: [<c01408da>] find_lock_page+0x96/0x9d Sep 20 13:34:33 hagar kernel: [<c014091a>] find_or_create_page +0x39/0x72 Sep 20 13:34:33 hagar kernel: [<c015cde3>] grow_dev_page+0x26/0x102 Sep 20 13:34:33 hagar kernel: [<c015cf8e>] __getblk_slow+0xcf/0xf3 Sep 20 13:34:33 hagar kernel: [<c015d285>] __getblk+0x3f/0x49 Sep 20 13:34:33 hagar kernel: [<c015d2ca>] __bread+0x9/0x1e Sep 20 13:34:33 hagar kernel: [<f88ef15b>] ext3_get_branch+0x63/0xc6 [ext3] Sep 20 13:34:33 hagar kernel: [<f88ef705>] ext3_get_block_handle +0x9e/0x27d [ext3] Sep 20 13:34:33 hagar kernel: [<f88838f8>] __split_bio+0xfd/0x103 [dm_mod] Sep 20 13:34:33 hagar kernel: [<f88ef948>] ext3_get_block+0x64/0x6c [ext3] Sep 20 13:34:33 hagar kernel: [<c015d664>] __block_write_full_page +0x107/0x2ea Sep 20 13:35:06 hagar kernel: [<f88ef8e4>] ext3_get_block+0x0/0x6c [ext3] Sep 20 13:35:11 hagar kernel: [<c015eabc>] block_write_full_page +0xc5/0xce Sep 20 13:35:14 hagar kernel: [<f88ef8e4>] ext3_get_block+0x0/0x6c [ext3] Sep 20 13:35:21 hagar kernel: [<f88f025a>] ext3_ordered_writepage +0xce/0x13a [ext3] Sep 20 13:35:23 hagar kernel: [<f88f016c>] bget_one+0x0/0x7 [ext3] Sep 20 13:35:25 hagar kernel: [<c01499b5>] pageout+0x8d/0xcc Sep 20 13:35:25 hagar kernel: [<c0149bfb>] shrink_list+0x207/0x3ed Sep 20 13:35:26 hagar kernel: [<c0148e8c>] __pagevec_release+0x15/0x1d Sep 20 13:35:27 hagar kernel: [<c0149fbe>] shrink_cache+0x1dd/0x34d Sep 20 13:35:28 hagar kernel: [<c014a67c>] shrink_zone+0xa7/0xb6 Sep 20 13:35:29 hagar kernel: [<c014a6d7>] shrink_caches+0x4c/0x57 Sep 20 13:35:30 hagar kernel: [<c014a7ce>] try_to_free_pages+0xc3/0x1a7 Sep 20 13:35:30 hagar kernel: [<c0144181>] __alloc_pages+0x1b5/0x29d Sep 20 13:35:30 hagar kernel: [<c0144281>] __get_free_pages+0x18/0x24 Sep 20 13:35:31 hagar kernel: [<c016b3a2>] __pollwait+0x2d/0x95 Sep 20 13:35:35 hagar kernel: [<c029d7c1>] tcp_poll+0x31/0x146 Sep 20 13:35:35 hagar kernel: [<c0278741>] sock_poll+0x12/0x14 Sep 20 13:35:36 hagar kernel: [<c016b645>] do_select+0x196/0x2c6 Sep 20 13:35:37 hagar kernel: [<c016b375>] __pollwait+0x0/0x95 Sep 20 13:35:37 hagar kernel: [<c016ba68>] sys_select+0x2e0/0x43a Sep 20 13:35:38 hagar kernel: [<c02d47bf>] syscall_call+0x7/0xb Sep 20 13:35:38 hagar kernel: [<c02d007b>] packet_rcv+0x18a/0x307 Sep 20 13:35:38 hagar kernel: Mem-info: Sep 20 13:35:40 hagar kernel: DMA per-cpu: Sep 20 13:35:41 hagar kernel: cpu 0 hot: low 2, high 6, batch 1 Sep 20 13:35:42 hagar kernel: cpu 0 cold: low 0, high 2, batch 1 Sep 20 13:35:42 hagar kernel: cpu 1 hot: low 2, high 6, batch 1 Sep 20 13:35:42 hagar kernel: cpu 1 cold: low 0, high 2, batch 1 Sep 20 13:35:43 hagar kernel: cpu 2 hot: low 2, high 6, batch 1 Sep 20 13:35:44 hagar kernel: cpu 2 cold: low 0, high 2, batch 1 Sep 20 13:35:45 hagar kernel: cpu 3 hot: low 2, high 6, batch 1 Sep 20 13:35:45 hagar kernel: cpu 3 cold: low 0, high 2, batch 1 Sep 20 13:35:45 hagar kernel: Normal per-cpu: Sep 20 13:35:46 hagar kernel: cpu 0 hot: low 32, high 96, batch 16 Sep 20 13:35:46 hagar kernel: cpu 0 cold: low 0, high 32, batch 16 Sep 20 13:35:46 hagar kernel: cpu 1 hot: low 32, high 96, batch 16 Sep 20 13:35:46 hagar kernel: cpu 1 cold: low 0, high 32, batch 16 Sep 20 13:35:46 hagar kernel: cpu 2 hot: low 32, high 96, batch 16 Sep 20 13:35:46 hagar kernel: cpu 2 cold: low 0, high 32, batch 16 Sep 20 13:35:47 hagar kernel: cpu 3 hot: low 32, high 96, batch 16 Sep 20 13:35:47 hagar kernel: cpu 3 cold: low 0, high 32, batch 16 Sep 20 13:35:47 hagar kernel: HighMem per-cpu: Sep 20 13:35:48 hagar kernel: cpu 0 hot: low 32, high 96, batch 16 Sep 20 13:35:48 hagar kernel: cpu 0 cold: low 0, high 32, batch 16 Sep 20 13:35:49 hagar kernel: cpu 1 hot: low 32, high 96, batch 16 Sep 20 13:35:50 hagar kernel: cpu 1 cold: low 0, high 32, batch 16 Sep 20 13:35:50 hagar kernel: cpu 2 hot: low 32, high 96, batch 16 Sep 20 13:35:50 hagar kernel: cpu 2 cold: low 0, high 32, batch 16 Sep 20 13:35:50 hagar kernel: cpu 3 hot: low 32, high 96, batch 16 Sep 20 13:35:51 hagar kernel: cpu 3 cold: low 0, high 32, batch 16 Sep 20 13:35:51 hagar kernel: Sep 20 13:35:51 hagar kernel: Free pages: 13396kB (832kB HighMem) Sep 20 13:35:52 hagar kernel: Active:868328 inactive:54456 dirty:31 writeback:18483 unstable:0 free:3349 slab:48649 mapped:902103 pagetables:28104 Sep 20 13:35:52 hagar kernel: DMA free:12564kB min:16kB low:32kB high:48kB active:0kB inactive:0kB present:16384kB pages_scanned:56093 all_unreclaimable? yes Sep 20 13:35:52 hagar kernel: protections[]: 0 0 0 Sep 20 13:35:52 hagar kernel: Normal free:0kB min:928kB low:1856kB high:2784kB active:441184kB inactive:155496kB present:901120kB pages_scanned:4059 all_unreclaimable? no Sep 20 13:35:52 hagar kernel: protections[]: 0 0 0 Sep 20 13:35:52 hagar kernel: HighMem free:832kB min:512kB low:1024kB high:1536kB active:3032128kB inactive:62328kB present:3866624kB pages_scanned:99 all_unreclaimable? no Sep 20 13:35:52 hagar kernel: protections[]: 0 0 0 Sep 20 13:35:53 hagar kernel: DMA: 5*4kB 4*8kB 4*16kB 3*32kB 3*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 2*4096kB = 12564kB Sep 20 13:35:53 hagar kernel: Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB Sep 20 13:35:53 hagar kernel: HighMem: 32*4kB 12*8kB 6*16kB 0*32kB 0*64kB 0*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 832kB Sep 20 13:35:53 hagar kernel: Swap cache: add 2602136, delete 2559582, find 710669/889146, race 2+44 Sep 20 13:35:54 hagar kernel: 936 bounce buffer pages Sep 20 13:35:54 hagar kernel: Free swap: 7862256kB Sep 20 13:35:54 hagar kernel: 1196032 pages of RAM Sep 20 13:35:54 hagar kernel: 802444 pages of HIGHMEM Sep 20 13:35:55 hagar kernel: 175029 reserved pages Sep 20 13:35:55 hagar kernel: 1585426 pages shared Sep 20 13:35:55 hagar kernel: 42690 pages swap cached

1 1

RE: [CentOS] Saw this and thought warmly of everyone on the list
by Alex Palenschat 21 Sep '06

21 Sep '06

This type of thread always amazes me. With all of the work that the CentOS team does (gratis) I sometimes wonder why they take the time to respond to such ignorance and pigheadedness. Perhaps this is evidence that producing a product like this takes enormous patience and thus prepares them to deal with the Tuttle's of the world. Good job guys, Alex

2 1

CentOS-announce Digest, Vol 19, Issue 15
by centos-announce-request＠centos.org 21 Sep '06

21 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0680 Important CentOS 4 x86_64 gnutls - security update (Johnny Hughes) 2. CESA-2006:0680 Important CentOS 4 i386 gnutls - security update (Johnny Hughes) 3. CESA-2006:0669 Moderate CentOS 3 ia64 php - security update (Pasi Pirhonen) 4. CESA-2006:0669 Moderate CentOS 4 ia64 php - security update (Pasi Pirhonen) 5. CESA-2006:0669 Moderate CentOS 3 i386 php - security update (Tru Huynh) 6. CESA-2006:0669 Moderate CentOS 3 x86_64 php - security update (Tru Huynh) 7. CESA-2006:0669 Moderate CentOS 4 x86_64 php - security update (Johnny Hughes) 8. CESA-2006:0669 Moderate CentOS 4 i386 php - security update (Johnny Hughes) 9. CESA-2006:0669 Moderate CentOS 3 s390(x) php - security update (Pasi Pirhonen) 10. CESA-2006:0669 Moderate CentOS 4 s390(x) php - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Sep 2006 14:21:50 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2006:0680 Important CentOS 4 x86_64 gnutls - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1158780110.5328.98.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0680 https://rhn.redhat.com/errata/RHSA-2006-0680.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: gnutls-1.0.20-3.2.3.i386.rpm gnutls-1.0.20-3.2.3.x86_64.rpm gnutls-devel-1.0.20-3.2.3.x86_64.rpm src: gnutls-1.0.20-3.2.3.src.rpm

1 0

Sendmail Segfaults
by Scott Silva 21 Sep '06

21 Sep '06

Has anybody else been seeing a lot of sendmail segfaults since Yesterday? I got over 2300 yesterday alone, and haven't got done counting todays. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

5 10

RE: [CentOS] Dell OpenManage installation on CentOS4
by Paul Malinowski 21 Sep '06

21 Sep '06

Mate, I've spend a day installing that stuff .. I have a script prepared for installation (needs to be modified - for instance different directories) I use x86_64 platform so you may want to change packages to install. ###################################################### echo ' * Packages upgrade and mantain' # Upgrade yum upgrade # Removing packages yum remove alsa-lib anacron arts aspell audiofile bluez-libs bluez-bluefw cups-libs dapl dhcpv6_client dos2unix dosfstools ipsec-tools irda-utils isdn4k-utils logwatch lrzsz mdadm mtools mt-st net-snmp-libs pax pcmcia-cs ppp pyxf86config redhat-artwork redhat-lsb rhnlib redhat-menus rhpl talk unix2dos vconfig wireless-tools words ypbind yp-tools # Installing default set of importent packages yum install gcc cpp links lynx iproute iptraf tcpdump vim-enhanced sysstat libgcc.i386 ncurses.i386 openssl096b.i386 pam.i386 zlib.i386 libxml2.i386 compat-libstdc++-33.i386 compat-libstdc++-296.i386 compat-libstdc++-33.x86_64 OpenIPMI.x86_64 echo # Installing Dell Server Admin echo Dell monitoring software cd /data01/packages/srvadmin/linux/RPMS/supportRPMS/RH4_x86_64/ rpm -i /data01/packages/srvadmin/linux/RPMS/supportRPMS/RH4_x86_64/dkms* rpm -i /data01/packages/srvadmin/linux/RPMS/supportRPMS/RH4_x86_64/openipmi* rpm -i /data01/packages/srvadmin/linux/RPMS/supportRPMS/RH4_x86_64/srvadmin-ipm i* cd /root/srvadmin/linux/custom rpm -i srvadmin-base/* rpm -i add-storageservices/*.rpm rpm -i add-webserver/*.rpm service ipmi start chkconfig ipmi on srvadmin-services.sh start echo 'Installation of Dell monitoring tools completed - if something goes wrong slap me ;) - Paul' ######################################################################## Make a diff of that what you have done and what you can find above and fix it ;) Take care, Paul Malinowski -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of James Pearson Sent: 21 September 2006 14:46 To: CentOS mailing list Subject: [CentOS] Dell OpenManage installation on CentOS4 I have a Dell 1950 box on evaluation with 2 SATA drives connected to the on board Dell PERC 5/i with the disks set up as a mirror I've installed CentOS4.4 (x86_64) on the system and now I'm trying to install/configure/use the Dell OpenManage tools that came on a CD with the system. I've installed the tools using the provided install script and they appeared to install OK. I'm primarily interested in the tools to monitor the RAID controller - but if I type: omreport storage controller -fmt lst I get: No controllers found Also, if I use the Web interface, I only get 'Diagnostic' menus - nothing about configuring/monitoring the storage. As I've never used OpenManage before, I'm not sure what to expect from it ... Does anyone know if I have to do anything special to get these OpenManage tools to work with CentOS4? Thanks James Pearson _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos This e-mail and all attachments have been scanned by the HighSpeed Office virus scanning service powered by MessageLabs and no known viruses were detected. This electronic message transmission contains information from Fish4 Trading Limited and/or other Fish4 affiliated companies (specifically Fish4Homes Ltd, Fish4Cars Ltd, Fish4Jobs Ltd and Fish4 Ltd) that may be confidential or privileged. The information is intended solely for the recipient and use by any other party is not authorized. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this electronic message transmission is prohibited. If you have received this electronic message transmission in error, please notify Fish4 immediately by telephone (0208 600 7000) or by electronic mail (administrator(a)fish4.co.uk) Thank you. This e-mail and all attachments have been scanned by the HighSpeed Office virus scanning service powered by MessageLabs and no known viruses were detected.

2 1

Dell OpenManage installation on CentOS4
by James Pearson 21 Sep '06

21 Sep '06

I have a Dell 1950 box on evaluation with 2 SATA drives connected to the on board Dell PERC 5/i with the disks set up as a mirror I've installed CentOS4.4 (x86_64) on the system and now I'm trying to install/configure/use the Dell OpenManage tools that came on a CD with the system. I've installed the tools using the provided install script and they appeared to install OK. I'm primarily interested in the tools to monitor the RAID controller - but if I type: omreport storage controller -fmt lst I get: No controllers found Also, if I use the Web interface, I only get 'Diagnostic' menus - nothing about configuring/monitoring the storage. As I've never used OpenManage before, I'm not sure what to expect from it ... Does anyone know if I have to do anything special to get these OpenManage tools to work with CentOS4? Thanks James Pearson

2 1

rpm problem after upgrade
by Andres Baravalle 21 Sep '06

21 Sep '06

Hi, I have upgraded Centos from 3.x to 4.3. The upgrade apparently didn't go too bad. I had to do the upgrade remotely, and I used as a base the post at http://www.centos.org/modules/newbb/viewtopic.php?topic_id=382 I rebooted the server, and it works. But yum does not work anymore, apparently due to some conflict between rpmlibs and selinux. This is the error that I get: -------------------------- There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib/python2.3/site-packages/rpmmodule.so: undefined symbol: rpmtsSetREContext Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.3.4 (#1, Feb 22 2005, 04:09:37) [GCC 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)] -------------------------- These are the relevant rpms that I have installed in my system: python-2.3.4-14.1 rpm-4.3.3-13_nonptl rpm-libs-4.3.3-13_nonptl yum-2.4.2-2.centos4 any suggestion? Thanks in advance, Andres

4 7

Ownership of /dev/snd/*
by Joseph Haig 20 Sep '06

20 Sep '06

I have several users using a machine running CentOS 4.4. For some reason, the ownership of /dev/snd/* seem to get left with a user when he has logged out (me at the moment) which means that no one else can use sound. Can anyone suggest why this might be happening, or give some pointers? Thanks Joe

1 0

New 4.4 install PHP security concern
by Eucke 20 Sep '06

20 Sep '06

Hello everyone. I am an FC2 refugee that's been lurking for a while. I am finishing up a Centos 4.4 build and am going through looking at security issues. In running a nessus scan I am finding it complaining about the versions for php, php-ldap, php-mbstring and php-pear. The complaint indicates that a much newer version of this exists and specifically names php-5.0.4-4.centos4 (by way of example). In researching this I am finding that this is not deemed to be part of the upgrade path for the default version in 4.4. I am also finding numerous issues with this "recommended" version breaking things right and left. I've searched the forums and the web so I decided to post here. Has anyone replaced the stock php (and related items) build and been perfectly happy with the results? Any reason why this "newer" version of php is not part of the natural upgrade path? Any writeups by anyone that has walked this path already? Thanks in advance! -- Eucke

4 4

problems with yum and 4.3-->4.4
by Larry Vaden 20 Sep '06

20 Sep '06

Are the problems with yum in the Centos 4.3->>4.4 upgrade process due to a forked or obsolete version of yum? I briefly scanned <https://lists.dulug.duke.edu> and didn't see any problems, but did see some incidents regarding yum hangs reported about a year ago. regarding the current upgrade, Seth Vidal in <https://lists.dulug.duke.edu/pipermail/linux/2006-September/000569.html> wrote: <quote> You should be able to get all of these and more with: yum update Let us know what breaks, -sv </quote> No replies added to the thread indicating the folks at Duke aren't having problems with the update to Centos 4.4 whereas folks on the Centos list have reported quite a few problems. Kind regards, Larry Vaden Internet Texoma, Inc.

4 3

CentOS-announce Digest, Vol 19, Issue 14
by centos-announce-request＠centos.org 20 Sep '06

20 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0667-01: Moderate CentOS 2 i386 gzip security update (John Newbigin) 2. CESA-2006:0667 Moderate CentOS 4 x86_64 gzip - security update (Johnny Hughes) 3. CESA-2006:0667 Moderate CentOS 4 i386 gzip - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Sep 2006 09:19:38 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0667-01: Moderate CentOS 2 i386 gzip security update To: centos-announce(a)centos.org Message-ID: <45107B0A.307(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0667-01 Moderate: gzip security update Files available: gzip-1.3-19.rhel2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Wed, 20 Sep 2006 05:26:41 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2006:0667 Moderate CentOS 4 x86_64 gzip - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1158748001.5328.65.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0667 https://rhn.redhat.com/errata/RHSA-2006-0667.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: gzip-1.3.3-16.rhel4.x86_64.rpm src: gzip-1.3.3-16.rhel4.src.rpm

1 0

Root directory ownership/perms
by Hugh E Cruickshank 20 Sep '06

20 Sep '06

Centos 4.3 Hi All: I just shot myself in the foot by change the owner/perms on the contents of the root directory (my bad!!!). I have done a quick compare with a running RHEL3U8 system and think I have every thing back to what it should be except for new directories media and selinux. Can someone out there currently running 4.3 send me an "ls -l" of their root directory so I can make sure I have got everything back as it should be? Alternately is there some command within Linux that will fix these up for me (we used to have something like this on SCO OSR5 but I have not been able to locate anything for Linux)? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

3 4

pptp vpn through CentOS 4.3.
by Stromgol 20 Sep '06

20 Sep '06

Hello, We can't connect to our pptp server through our CentOS gateway with a XP client. The linux client is working but not the XP client. I know for a fact that the pptp server is not the problem because if I connect the XP machine directly to the Internet the pptp vpn is working. I know about the pptp-conntrack-nat patch, I compiled the 2.4.9 kernel, with patch-o-matic-ng-20060511.tar.bz2 without any problem. But compiling iptables end with this error: make: *** [extensions/libipt_connlimit_sh.o] Error 1 I'm wondering if we really need that patch, because that patch seems to be only needed when you want simultaneous pptp connection, which is not my case. I only want to be able to make a simple pptp connection. Any pointers? Thanks.

2 4

Re: Gnome Desktop Screensaver Security Lock Override?
by James B. Byrne 20 Sep '06

20 Sep '06

On Mon, 18 Sep 2006 10:59:21 -0400, Steve Huff <shuff(a)vecna.org> wrote: > > 1. ssh in > 2. become root > 3. pkill -u <username of user who locked the screen> -f -x > "^xscreensaver -nosplash$" Yes, I have done something si,milar to this in thepast but I was hoping that there might be away to accomplish the administraor override from the unit console of the system in question. I infer then that there is no such capability built into gnome, correct? It appears then that we will have to disable the screensvar terminal lock function since too many people in our organization have the habit of just leaving that desk with their sessions left on. Is there an auto logout capability in CentOS-4 that I can enable instead, so that after say 10 minutes of inactivity the user session is terminated? Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

2 1

checking remote processes
by bruce 20 Sep '06

20 Sep '06

hi... looking for how to check processes from the process table of a remote machine. i want to be able to automate the process. i'd prefer to be able to have a cron process to periodically check the status.. any thoughts/comment/ideas would be helpful... thanks

3 2

postconf: /usr/lib/mysql/libmysqlclient.so.14: no version information available (required by postconf)
by Bob Pierce 19 Sep '06

19 Sep '06

One of my servers is complaining with this error now that I have updated to CentOS 4.4. I am now running postfix-2.2.10-1.RHEL4.2.mysql_pgsql.c4 from the centosplus repository. I had been running postfix-2.1.5-4.2.RHEL4.mysql.centos4 from the centosplus repository. I also have the following MySQL related packages installed: mysql-devel-5.0.22-1.centos.1 pam_mysql-0.6.0-1 mysqlclient14-4.1.14-4.2.c4.1 php-mysql-5.0.4-5.centos4 perl-DBD-MySQL-2.9004-3.1 mysql-5.0.22-1.centos.1 mysqlclient10-devel-3.23.58-9.2.c4 mysqlclient14-devel-4.1.14-4.2.c4.1 mysql-server-5.0.22-1.centos.1 mysqlclient10-3.23.58-9.2.c4 The MySQL 5 packages are from the centosplus repository. Has anyone else run across this? Any help would be appreciated. Bob

1 1

ssh key question
by bruce 19 Sep '06

19 Sep '06

hi... if i have a machine that i want to be able to automatically ssh into multiple child machines within the network, do i have to create a key for the parent machine, and supply the key to the child machines, or do i create a key for each child machine, and supply the keys to the parent? thanks

3 2

unsupported sector size 4096 on /dev/sda
by Rene Salmon 19 Sep '06

19 Sep '06

Hi list, I just received a storage array and created a 3TB LUN with a block/sector size on the disks of 4096. When I boot the our centos-4.4 box attached to this array I get the "unsupported sector size 4096" message: Remounting root filesystem in read-write mode: [ OK ] ERROR: unsupported sector size 4096 on /dev/sda. No RAID disks Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /scratch] fsck.ext3 -a /dev/hdb1 /scratch: clean, 90/14663680 files, 485450/29304560 blocks [ OK ] Mounting local filesystems: [ OK ] Any ideas as to why centos does not like the 4096 sector size on /dev/sda? What are the supported sector/block sizes in centos on disks/LUNs? Eventually I will be creating an LVM and ext3 file system on this. Any one know what the file system size limits on LVM/ext3 are? Thanks in advance for any help on this. Rene -- - -- Rene Salmon Tulane University Center for Computational Science http://www.ccs.tulane.edu rsalmon(a)tulane.edu Tel 504-862-8393 Tel 504-988-8552 Fax 504-862-8392

1 0

CentOS-announce Digest, Vol 19, Issue 13
by centos-announce-request＠centos.org 19 Sep '06

19 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0667 Moderate CentOS 3 ia64 gzip - security update (Pasi Pirhonen) 2. CESA-2006:0667 Moderate CentOS 3 s390(x) gzip - security update (Pasi Pirhonen) 3. CESA-2006:0667 Moderate CentOS 4 ia64 gzip - security update (Pasi Pirhonen) 4. CESA-2006:0667 Moderate CentOS 4 s390(x) gzip - security update (Pasi Pirhonen) 5. CESA-2006:0667 Moderate CentOS 3 i386 gzip - security update (Tru Huynh) 6. CESA-2006:0667 Moderate CentOS 3 x86_64 gzip - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 19 Sep 2006 17:54:11 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0667 Moderate CentOS 3 ia64 gzip - security update To: centos-announce(a)centos.org Message-ID: <20060919145411.GX17774(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0667 https://rhn.redhat.com/errata/RHSA-2006-0667.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/gzip-1.3.3-13.rhel3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

RE: [CentOS] ssh key question
by Alex Palenschat 19 Sep '06

19 Sep '06

You generate the key pair on the client (what you called the parent) and then copy the public portion to each server (what you called the child). Here is a quick Google that I think should help: http://itt.theintegrity.net/pmwiki.php?n=ITT.SSHKeyManagement alex > -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of bruce > Sent: Tuesday, September 19, 2006 9:37 AM > To: 'CentOS mailing list' > Subject: [CentOS] ssh key question > > > hi... > > if i have a machine that i want to be able to automatically > ssh into multiple child machines within the network, do i > have to create a key for the parent machine, and supply the > key to the child machines, or do i create a key for each > child machine, and supply the keys to the parent? > > thanks > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos >

1 0

Centos 4.4 - mythtv
by Tom Brown 19 Sep '06

19 Sep '06

can anyone advise on where to find the mythtv repo? I have dag but a yum install mythtv-suite yields nothing thanks

3 3

swat or samba rpm
by Ivan Arteaga 19 Sep '06

19 Sep '06

Hi List, First time posting here^^ I had installed centos 4.3, working fine with the built-in samba package but I cannot see the swat package installed. Does somebody know if it's installed by default with samba or it should be installed separately? Any comment will be appreciated. Regards, --Ivan. BTW.. tried the yum update and install and got this output [root@mail ~]# yum install swat Setting up Install Process Setting up repositories update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Parsing package install arguments No Match for argument: swat Nothing to do

2 2

OT: Openwebmail and speedcgi suidperl
by Erick Perez 19 Sep '06

19 Sep '06

Hi, I use Centos 4.4, latest rpm for OWM. OWM runs fine but i want to enable speedy, so after I enable it I get the error: Not a perl script at /dev/fd/9 line 1., referer: http://mywebserver/ speedy_backend[3633]: perl_parse error, referer: http://mywebserver/ speedy[3631]: Cannot spawn backend process, referer: http://mywebserver/ my speedy is installed from RPM. perl-CGI-SpeedyCGI-2.22-1.2.el4.rf openwebmail-2.52-1 perl, v5.8.5 built for i386-linux-thread-multi Server version: Apache/2.0.52 Linux Centos 2.6.9-42.EL # ls -la /usr/bin/speed* -r-xr-xr-x 1 root root 51865 Dec 25 2005 /usr/bin/speedy -r-xr-xr-x 1 root root 105324 Dec 25 2005 /usr/bin/speedy_backend all my openwebmail .pl scripts call #!/usr/bin/suidperl -T and I want to change them to speedy. However it seems that the speedy rpm is not? suid compiled. Can you suggest how to add the suid capability to the RPM? or maybe another method? Thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

1 0

Firewire question (Centos 4.4)
by chrism＠imntv.com 19 Sep '06

19 Sep '06

Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it? This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card. In particular, I'm trying to mount a firewire external DVD device. Lspsi shows the following so I *thought* the kernel found the card: [ritz@localhost ~]$ /sbin/lspci 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:01.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID 02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 02:05.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08) 03:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 08) 03:06.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61) Any suggestions would be much appreciated.

4 6

CentOS-announce Digest, Vol 19, Issue 12
by centos-announce-request＠centos.org 18 Sep '06

18 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0676 Critical CentOS 3 s390(x) seamonkey - security update (Pasi Pirhonen) 2. CESA-2006:0676 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) 3. CESA-2006:0676-01: Critical CentOS 2 i386 seamonkey security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Sun, 17 Sep 2006 22:21:44 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0676 Critical CentOS 3 s390(x) seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20060917192144.GT17774(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0676 https://rhn.redhat.com/errata/RHSA-2006-0676.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/seamonkey-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-chat-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-devel-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-dom-inspector-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-js-debugger-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-mail-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-nspr-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-nspr-devel-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-nss-1.0.5-0.1.el3.centos3.s390.rpm updates/s390/RPMS/seamonkey-nss-devel-1.0.5-0.1.el3.centos3.s390.rpm s390x: updates/s390x/RPMS/seamonkey-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-chat-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-devel-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-dom-inspector-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-js-debugger-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-mail-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-nspr-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-nspr-devel-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-nss-1.0.5-0.1.el3.centos3.s390x.rpm updates/s390x/RPMS/seamonkey-nss-devel-1.0.5-0.1.el3.centos3.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Gnome Desktop Screensaver Security Lock Override?
by James B. Byrne 18 Sep '06

18 Sep '06

We deployed our first CentOS-4 based workstation this past spring to see if we can conveniently replace all, or at least most, of our MS-Win based user systems with Linux boxes instead. Generally this trial unit has proved a success but there is one lingering problem that I cannot seem to find a straight-forward answer to: Is there an administrator override to a user's password protected screensaver terminal lock? So far the solution seems to have been brute force system resets and I am not happy with this caviler approach to what should be a simple, and safe, administrative procedure. So, is there an equivalent function to MS-Win's administrator login to force entry into a locked terminal and make it available for others? Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

4 3

RE: [CentOS] yam help
by Bowie Bailey 18 Sep '06

18 Sep '06

Jim Perrin wrote: > > Okay, can we move this to the Yam support list now, like dag kindly > requested at the beginning? Sorry, I must have missed his comment. I didn't realized there was a separate yam support list. I'll move this over to the proper list now. *sigh* Just what I need... Yet Another Mailing list... :) -- Bowie

3 2

Mailing List Etiquette
by Johnny Hughes 18 Sep '06

18 Sep '06

OK guys and gals ... can we please stop all the fighting? When technical questions are asked, they should be answered. I lot of people on this list have something that a lot of newbies need ... experience. So answering a question with "RTFM" or "JFGI" is not going to impart any of your experience ... which is one of the things they need and want. Also ... if someone attacks you, you should not respond in kind, but should try not to flame or bait people. It take more than one person to get these things going, and just a little restraint on both people's parts could prevent problems. Can everyone who is a member of this list please read this document: http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html Especially the section "I've been insulted! How should I respond?" Please, please, please ... can we be civil and not attack people personally. ALSO There is a forum at http://www.centos.org/modules/newbb/ It would be very good if people would post questions and answers there as well. Thanks, Johnny Hughes

10 11

Centos 4.4 Install bug
by Seth Bardash 18 Sep '06

18 Sep '06

To the Centos maintainers: We tried to install Centos 4.4 i386 (i686 / Athlon) on a Dual Opteron 254 Iwill DK8N MB, 1GB (4 x 256M) system with a 3ware 9500S-4 and 4 x 80 GB disks in a RAID 10 array. Both tries caused Centos to first kernel panic until we turned off IO-APIC in the BIOS. Both tries also only loaded the UP kernel and did not load the smp kernel on the machine. The smp kernel was not even installed on the machine. The BIOS see 2 cpu's and so did 4.3. There seems to be a CPU qty discovery problem during install. When the smp kernel is installed from rpm it works fine and even enables numa properly. We used the Net boot i386 iso image and loaded the machine from over the network. We then tried the x86_64 version with the same results. Any suggestions??? Seth Bardash Integrated Solutions and Systems 1510 Old North Gate Road Colorado Springs, CO 80921 719-495-5866 719-495-5870 Fax 719-337-4779 Cell http://www.integratedsolutions.org Failure can not cope with knowledge and perseverance! -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.4/449 - Release Date: 9/15/2006

4 4

kernel-2.6.9-42.0.2 and LVM
by Feizhou 18 Sep '06

18 Sep '06

Sep 13 12:18:56 sfe fsck: /dev/VolGroup00/LogVol00 is mounted. Sep 13 12:18:56 sfe fsck: e2fsck: Cannot continue, aborting. Sep 13 12:18:56 sfe rc.sysinit: Checking root filesystem failed I had updated the box a few days ago but I had not rebooted with the new kernel. After the reboot, I get the root filesystem is not marked clean message and also that it was not mounted read-only. I supplied the root password, remounted read-only, did the obligatory fsck and hit ctrl-D. Guess what? I get the same message! In addition, there were no error messages during the fsck to boot. Anyone else encounter this?

3 4

yum update dependency problem centos 4.4
by Richard E Miles 18 Sep '06

18 Sep '06

I ran yum update and had a problem with dependences: [rmiles@localhost ~]$ sudo yum update Loading "fastestmirror" plugin Loading "protectbase" plugin Setting up Update Process Setting up repositories Loading mirror speeds from cached hostfile Reading repository metadata in from local files Excluding Packages from CentOS.Karan.Org-EL4 - Stable Finished 131 packages excluded due to repository protections Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package wxGTK.i386 0:2.6.2-0.2.2.fc4 set to be updated ---> Package libXvMCW.i386 0:0.9.3-1.2.fc4 set to be updated ---> Package sylpheed-claws.i386 0:2.0.0-1.2.fc4 set to be updated --> Running transaction check --> Processing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) for package: audacity --> Processing Dependency: libssl.so.5 for package: sylpheed-claws --> Processing Dependency: libdb-4.3.so for package: sylpheed-claws --> Processing Dependency: libcrypto.so.5 for package: sylpheed-claws --> Processing Dependency: libwx_gtk-2.4.so.0 for package: audacity --> Finished Dependency Resolution Error: Missing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) is needed by package audacity Error: Missing Dependency: libssl.so.5 is needed by package sylpheed-claws Error: Missing Dependency: libdb-4.3.so is needed by package sylpheed-claws Error: Missing Dependency: libcrypto.so.5 is needed by package sylpheed-claws Error: Missing Dependency: libwx_gtk-2.4.so.0 is needed by package audacity I tried updating openssl independently and that had no effect. What should I do now? Suggestions? -- Richard Miles Federal Way WA. USA registered linux user 46097

4 4

CentOS-announce Digest, Vol 19, Issue 11
by centos-announce-request＠centos.org 17 Sep '06

17 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0675 Critical CentOS 4 s390(x) firefox - security update (Pasi Pirhonen) 2. CESA-2006:0677 Critical CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 16 Sep 2006 21:34:32 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0675 Critical CentOS 4 s390(x) firefox - security update To: centos-announce(a)centos.org Message-ID: <20060916183432.GQ17774(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0675 https://rhn.redhat.com/errata/RHSA-2006-0675.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/firefox-1.5.0.7-0.1.el4.centos4.s390.rpm s390x: updates/s390x/RPMS/firefox-1.5.0.7-0.1.el4.centos4.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Jabber installation Guide
by Charles Yao 17 Sep '06

17 Sep '06

Hi guys, Is there any guide on how to install Jabbe on a windows small business server? Charles -- "It is unwise to pay to much, but it is worse to pay too little; you sometimes lose everything becuase the thing you bought was incapable of doing the thing it was bought to do"

3 4

mailing list dubbel entries
by c5050 16 Sep '06

16 Sep '06

Can anyone tell me where to start... I'm getting all mailing list messages twice. Running CentOS 4.4 with all updates and Evolution

2 1

c4.4: OpenSSL Behavior: handshakes/ nrpe, snmpd, et al.
by karl＠klxsystems.net 16 Sep '06

16 Sep '06

Hello list, johnny, karanbir, rodrigo, william, all, Looks like some changes in 4.4 with openssl behavior I thought to ask about now that things have quieted down slightly since release. I use openssl with my nagios nrpe plugins, and now am getting a "could not complete SSL handshake". I will of course post to nagios list but first want to find out from centos side some key info re: 4.4/openssl [-if any, maybe no change at all?] since this all worked fine in 4.3, and it probably won't be too hard to do so in 4.4. : ) In doing an rpm -qa | grep openssl I am actually seeing two instances of openssl installed (Is that even possible?), when on a 4.3 box the output shows only one: ### box that's not doing proper SSL handshake openssl-0.9.7a-43.11 openssl-devel-0.9.7a-43.11 xmlsec1-openssl-1.2.6-3 openssl-0.9.7a-43.11 box that's working properly: # rpm -qa | grep ssl openssl-0.9.7a-43.8 xmlsec1-openssl-1.2.6-3 openssl-devel-0.9.7a-43.8 Background: 4.3 box with the issue was built with a custom RPM that we made that compiles apache with SSL. (different from the working box which is 4.3 and had a source compile and no ssl calls), Then I installed net-snmp, net-snmp-utils, and net-snmp-devel, (where in 4.3 all I had to do was edit /etc/snmp/snmpd.conf) which had a dependency for openssl, which it satisfied via yum. Perhaps the problem lies with the custom apache rpm? Our yum repo uses DAG. File perms are perfectly matched to working machine, so we know it's not that. -any ideas p.s. was snmp removed since 4.3? p.p.s. I never had to config tcpwrappers before in 4.3, should I do so now in 4.4? -karlski

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss