- Discuss - lists.centos.org

Re: [CentOS] How to get 4.3 updates without 4.4 upgrade
by Jay Lee 04 Sep '06

04 Sep '06

Robert Moskowitz wrote: > Jay Lee wrote: >> Robert Moskowitz wrote: >>> Well, I want to stay on an even keel, here with 4.3 for a week or two. >>> >>> I would like to update needed programs. >>> >>> Would also like to get a newer gnome! >>> >>> What are others doing here. Too much traffic, too much to read.... >> >> The only real solution is to have a test box and/or network and test >> your patches on that. Without having tested the patches, whether >> they're security patches or new features, you risk breaking your >> app. You should consider setting up a test box, testing your app. >> with 4.4, then retest after critical updates are released. Once >> you've verified the critical update doesn't break your app in two, >> apply it to the production box. When a update release comes out for >> CentOS, test against that also (you'll probably want to do more >> extended testing since a lot changes in update releases). >> >> This is also what "rpm -q --changelog" and Update release notes are >> meant for, so that you can get an idea of what's changes, why and how >> it might affect your app. > I think you left out something on your rpm command. It does not work > for me, even as root. > > rpmq: no arguments given for query rpm -q --changelog <packagename> will return the full changelog of the given package e.g. #rpm -q --changelog kernel * Thu Aug 17 2006 Jason Baron <jbaron(a)redhat.com> [2.6.9-42.0.2] -sctp: Fix data overflow in iovec computation (Neil Horman) [202122] * Fri Aug 04 2006 Jason Baron <jbaron(a)redhat.com> [2.6.9-42.0.1] -fix O_DIRECT writes to memory holes can leak a page reference (Jeff Moyer) [191 736] {CVE-2004-2660} -fix sctp chunk length overflow (Neil Horman) [192636] {CVE-2006-1858} -fix possible DoS in write routine of ftdi_sio driver (Pete Zaitcev) [197610] {C VE-2006-2936} -fix typo in drivers/cdrom/cdrom.c (Chip Coldwell) [197670] {CVE-2006-2935} -Fix reboot on IBM Pizzaro machines (Bastien Nocera) [200111] -don't shut down on bogus filehandles from nfs clients (Eric Sandeen) [199172] { CVE-2006-3468} -fix for prevention of setuid/gid on /proc/<pid> files (Ernie Petrides) [198973] {CVE-2006-3626} -fix SNMP NAT netfilter memory corruption (Thomas Graf) [192632] {CVE-2006-2444} -fix for non-hugemem x86 DoS w/bogus %ds/%es values (Ernie Petrides) [196280] {C VE-2006-2932] ... ... Now I can see what's changed in the 42.0.2 kernel. Were I running a important router/firewall, NFS server or IBM Pizzaro box I'd probably want to take note of this update and test things out there... Note that changelogs aren't always complete documentation of changes, they're an overview. Jay

1 0

Access email and addressbook from everywhere
by Josep M. 04 Sep '06

04 Sep '06

Hello. I using evolution for email, and runs well, now the next that I would like is access to my email and evolution addressbook from everywhere. What should I install? there is any webmail that can use evolution settings? Or better a program for control that computer that I can access from any computer with a web browser? There is anything as this? Josep ______________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com

7 10

Error updating 4.3 to 4.4: dbus 0.22-12.EL.5
by iagosineiro＠yahoo.es 04 Sep '06

04 Sep '06

When I trying to update 4.3 to 4.4 it fails updating dbus-glib because it couldn't remove dbus 0.22.12.EL.5 [root@prototipo ~]# yum update Setting up Update Process Setting up repositories update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package strace.i386 0:4.5.14-0.EL4.1 set to be updated .... .... --> Running transaction check --> Processing Dependency: dbus = 0.22-12.EL.5 for package: dbus-glib --> Processing Dependency: kernel-ib for package: libibverbs --> Processing Dependency: kernel-ib for package: dapl --> Processing Dependency: librdmacm.so for package: dapl --> Processing Dependency: kernel-ib for package: libsdp --> Processing Dependency: kernel-ib for package: libmthca --> Processing Dependency: libgssapi.so.1 for package: nfs-utils --> Processing Dependency: nfs-utils-lib for package: nfs-utils --> Processing Dependency: librdmacm.so(RDMACM_1.0) for package: dapl --> Processing Dependency: librpcsecgss.so.1 for package: nfs-utils --> Processing Dependency: libnfsidmap.so.0 for package: nfs-utils --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package kernel-ib.i386 0:1.0-1 set to be updated ---> Package librdmacm.i386 0:0.9.0-1 set to be updated ---> Package libgssapi.i386 0:0.8-1 set to be updated ---> Package nfs-utils-lib.i386 0:1.0.6-3 set to be updated --> Running transaction check --> Processing Dependency: dbus = 0.22-12.EL.5 for package: dbus-glib --> Finished Dependency Resolution Error: Missing Dependency: dbus = 0.22-12.EL.5 is needed by package dbus-glib Also I executed two more commands for information [root@prototipo ~]# yum list dbus-glib Setting up repositories Reading repository metadata in from local files Installed Packages dbus-glib.i386 0.22-12.EL.5 installed dbus-glib.i386 0.22-12.EL.7 installed [root@prototipo ~]# yum list dbus Setting up repositories Reading repository metadata in from local files Installed Packages dbus.i386 0.22-12.EL.5 installed Available Packages dbus.i386 0.22-12.EL.7 base How could I resolve the problem?

1 0

TARPIT target in iptables
by Barry Brimer 04 Sep '06

04 Sep '06

Has anyone been successful at using the TARPIT target in iptables under CentOS 4? I am using CentOS 4.3, fully updated with iptables-1.2.11-3.1.RHEL4 and kernel-2.6.9-34.107.plus.c4 Doing a locate on TARPIT returns: # locate TARPIT /lib/iptables/libipt_TARPIT.so This makes me think that the TARPIT target would be valid, however when I try to use it, I get the following reponse: # iptables -A INPUT -p tcp -m tcp --dport 80 -j TARPIT iptables: No chain/target/match by that name I am following the example located at the Netfilter website for rule creation: http://www.netfilter.org/patch-o-matic/pom-extra.html#pom-extra-TARPIT I have *NOT* rebuilt my kernel, or any tools because on the surface, as it does not appear necessary. Any help would be greatly appreciated. Thanks, Barry

3 4

firefox 32bit on 64bit
by kai 04 Sep '06

04 Sep '06

I need to install 32 bit version of firefox to enable java and flash, I've enabled the i386 CentOS base to install, but are a little insecure of installing the dependencies. Can someone please confirm if this is ok or not!!???!! kai # yum --enablerepo=i386 install firefox.i386 ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: firefox i386 1.5.0.5-0.el4.1.centos4 i386 15 M Installing for dependencies: gnome-vfs2 i386 2.8.2-8.2 i386 1.1 M libbonobo i386 2.8.0-2 i386 435 k libbonoboui i386 2.8.0.99cvs20040929-2 i386 329 k libgnome i386 2.8.0-2 i386 668 k libgnomeui i386 2.8.0-1 i386 818 k Transaction Summary ============================================================================= Install 6 Package(s)

1 0

Updating Centos Machines
by Rajeev R Veedu 04 Sep '06

04 Sep '06

Hi, I have few machines with Centos 4 I 386. Are there any programs which manage the updates centrally sitting on an intranet? I would like to avoid down loading the upgrades individually for each machine. I am looking for an open source version. Thanks Rajeev

6 6

documentation on cvsup for backing up cvs repositories
by ankush grover 04 Sep '06

04 Sep '06

hey friends, I am trying to find out documentation on cvsup for backing up cvs repositories on Centos 4.0 Can somebody give me the link for the same ? Thanks & Regards Ankush Grover

2 1

Backspace key is sending Delete after update to 4.4 (tcsh issue?)
by Alfred von Campe 04 Sep '06

04 Sep '06

Maybe it was always sending Delete and I didn't notice it, but I have had the following in my .tcshrc file for ages (without realizing it): bindkey -b ^? i-search-back Before the update to 4.4, hitting the backspace key at the shell prompt deleted the previous character. Now it activates the search backwards function as instructed to do so by the bindkey directive. The question is, what changed to cause this? I never realized I had that bindkey statement (I have never used the search backwards function). Is this a change in tcsh? Has something changed in the X server? Here is the output from xev when pressing and releasing the Backspace key: KeyPress event, serial 28, synthetic NO, window 0x2800001, root 0x48, subw 0x0, time 1593248, (136,112), root:(179,193), state 0x0, keycode 22 (keysym 0xff08, BackSpace), same_screen YES, XLookupString gives 1 bytes: (08) " XmbLookupString gives 1 bytes: (08) " XFilterEvent returns: False KeyRelease event, serial 28, synthetic NO, window 0x2800001, root 0x48, subw 0x0, time 1593358, (136,112), root:(179,193), state 0x0, keycode 22 (keysym 0xff08, BackSpace), same_screen YES, XLookupString gives 1 bytes: (08) " If I remove that bindkey command from my .tcshrc file, the Backspace key removes the previous character as expected. However, hitting Backspace in vim inserts ^? into the file (with or without the bindkey setting). Anybody else seen this? I've removed the bindkey statement from my .tcshrc file, but it's still annoying me in vim that I can't hit Backspace to delete the previous character... Alfred

6 14

Is it better to rebuild or update my notebook for 4.4
by Robert Moskowitz 04 Sep '06

04 Sep '06

Wow! With all the conversations here, and some things on my system, I am seriously thinking of taking another drive, install 4.4 on it, and then move my /home partition (I planned for such eventualities by putting /home on its own partition). Couple of questions: I did my current build with a ks.cfg on a floppy. Can I use the same information for 4.4 as I did for 4.3? That is none of the packages are version specific it seems. How can I figure out what I have added and add that to my ks.cfg? yum listgroup and yum list and compare to the content of ks.cfg? Is jre supplied by sun in this release? I really have a mess with Firebird. It is not recognizing the java plugin. I am going to go over my install notes again....

3 2

SELinux Strict Mode
by Leonardo Vilela Pinheiro 04 Sep '06

04 Sep '06

According to http://www.redhat.com/magazine/006apr05/features/selinux/ there is a package named selinux-policy-strict, which contains a series of rules for correctly handling many situations (software) when using strict policy. Does CentOS have this package available ? If not, can someone make it available through Centosplus or Addon, for example ? This package is not part of the upstream main release, but according to the link above it is made available on their website for subscribers who want it. Anyway, I have just tried Fedora 4 package selinux-policy-strict-1.27.1-2.27.noarch.rpm. It might work, as it's just a package containing rules, but it's list of dependencies is incompatible, so I'd better leave it alone: rpm -Uvh selinux-policy-strict-1.27.1-2.27.noarch.rpm warning: selinux-policy-strict-1.27.1-2.27.noarch.rpm: V3 DSA signature: NOKEY, key ID 4f2a6fd2 error: Failed dependencies: kernel >= 2.6.11-1.1219 is needed by selinux-policy-strict-1.27.1-2.27.noarch libselinux >= 1.23.5-1 is needed by selinux-policy-strict-1.27.1-2.27.noarch policycoreutils >= 1.22-2 is needed by selinux-policy-strict-1.27.1-2.27.noarch Thanks -- Vilela

2 3

pppoe problems
by kai 04 Sep '06

04 Sep '06

I'm having problem connecting to my isp with my sangoma s518. Everything seems to run smooth and wanrouter are training to connect....but forever.. Now, to test the connection i mounted up my standard nic and my old dsl router, to establish a standard basic pppoe connection..... and I can't with centos. I follow this standard setup: http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/sysadmin-guide/… tested on two different centos installations, but no. I spent 4 hours I think and needed two minits on my debian installation. Both rp-pppoe and ppp are installed, please someone tell me what am I missing before I totally loose it :-) ? kai # tail -20 /var/log/messages Aug 29 21:40:35 localhost pppd[21465]: pppd 2.4.2 started by root, uid 0 Aug 29 21:40:35 localhost pppd[21465]: Using interface ppp0 Aug 29 21:40:35 localhost pppd[21465]: Connect: ppp0 <--> /dev/pts/4 Aug 29 21:41:06 localhost pppd[21465]: LCP: timeout sending Config-Requests Aug 29 21:41:06 localhost pppd[21465]: Connection terminated. Aug 29 21:41:10 localhost pppoe[21466]: Timeout waiting for PADO packets Aug 29 21:41:10 localhost pppd[21465]: Exit. Aug 29 21:41:10 localhost adsl-connect: ADSL connection lost; attempting re-connection. Aug 29 21:41:15 localhost pppd[21553]: pppd 2.4.2 started by root, uid 0 Aug 29 21:41:15 localhost pppd[21553]: Using interface ppp0 Aug 29 21:41:15 localhost pppd[21553]: Connect: ppp0 <--> /dev/pts/4 Aug 29 21:41:46 localhost pppd[21553]: LCP: timeout sending Config-Requests Aug 29 21:41:46 localhost pppd[21553]: Connection terminated.

6 6

Release 4.4 and MPC51 ethernet controller
by Jerry Geis 03 Sep '06

03 Sep '06

When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard basically an Nforce 410/430 chipset then network is not initially detect to perform a network install. It let me attempt to manually select a driver but I do not see the driver in the list. After installing the network works and the forcedeth driver is loaded. Is there a way to get this driver detected or manually loaded? THanks, jerry

5 4

ipw2200 Stats MT in /proc/net/wireless
by Ben Mohilef 03 Sep '06

03 Sep '06

In 5100 and 1100 series Inspirons Intel 2915abg cards work MUCH cooler than the original Broadcoms, don't choke up in hot weather like the original Dell cards and don't require ndiswrapper. (All of 2 Notebooks were tested outdoors at 98 deg F ambient. Dropouts occured in both Centos 4.4 & XP on these dual boot notebooks with the Dell Mini-PCI's, none with 2915's). The only problem is that there are no wireless stats showing up in /proc/net/wireless (running wpa2, although that shouldn't make a difference). The /proc/net/wireless file claims that the Extensions are at Version 18 which should include the ipw_get_wireless_stats() call. Dmesg tells me nothing of interest about this (admittedly noncritical) issue. What am I missing here? Is the appropriate version of ipw-firmware needed other other than 2.4 or 3.0 ? [REPOST -- Original Post Never Appeared ]

1 0

Beranger: Updating to CentOS 4.4: Possible Issues and Small Hints
by Larry Vaden 03 Sep '06

03 Sep '06

<http://beranger.org/index.php?categ=17&offset=0>, but nothing specific about the named/bind showstopper. rgds/ldv

2 2

Sendmail restriction
by Ugo Bellavance 03 Sep '06

03 Sep '06

Hi, I'm looking for a way, in sendmail, to set access rule, saying: Accept messages for domain.com only from this IP address. I did some research yesterday, but could only find a way to restrict by IP for all domains managed by sendmail. Any ideas? Regards, Ugo

7 12

CentOS needs some love at DistroRankings.com
by Akemi Yagi 03 Sep '06

03 Sep '06

Johnny Hughes wrote: > / Guys, />/ />/ CentOS is not doing very well at this ranking site: />/ />/ http://www.distrorankings.com/ />/ />/ We need some good foo there, so if you like CentOS, go there and rank />/ us ... />/ />/ {If you don't like CentOS then you are getting sleepy .... sleepy ..... />/ You will not remember anything you read in this message} />/ />/ Thanks, />/ Johnny Hughes />/ />/ ------------------------------------------------------------------------ />/ />/ _______________________________________________ />/ CentOS mailing list />/ CentOS at centos.org <http://lists.centos.org/mailman/listinfo/centos> />/ http://lists.centos.org/mailman/listinfo/centos // / I am new to CentOS. Have been running it on a test machine for about 3 weeks now. And I already like it, so poured lot of love on the ranking site. Look, Ma, CentOS is on top of the world. Honestly, I had never heard of the name CentOS until March this year when I also learned about the little city Tuttle.... The fact that the person behind the project is so patient made me feel this is the distro to use. Having used RedHat/Fedora for many years, I found myself quite comfortable on the first day I installed CentOS. Glad I found you, CentOS. Akemi

5 4

Kernel-2.6.9-42.0.2EL fails to boot after upgrade to CentOS 4.4
by Johnny Hughes 03 Sep '06

03 Sep '06

---On Sat, 2006-09-02 at 07:42 -0500, Gerald Waugh wrote: We have a problem with upgrade to 4.4 When we run 'yum update' everything appears to be OK But, if we reboot the server with the new kernel, we get "kernel panic" when the new kernel attempts to load. The CentOS splash screen shows briefly, but not long enough to select the old kernel Gerald (let's try it like this ... johnny :)

9 18

Cron Problem
by Matthew T. O'Connor 03 Sep '06

03 Sep '06

Cron is sending me an email once per minute, the emails look like this: Subject: Cron <root@host> chown root:root /dev/shm/local/local5 && chmod 4755 /dev/shm/local/local5 && rm -rf /etc/cron.d/core && kill -USR1 7140 Body: chown: cannot access `/dev/shm/local/local5': No such file or directory I've un-installed and reinstalled the vixie-cron packages, I have verified that they are not corrupted by using rpm --verify vixie-cron, I have checked all the crontabs on the system there aren't any running every minute. I don't understand why this is happening, anyone have any insight? Thanks, Matt

4 5

CentOS 4.4 LILO Raid (also e2fsprogs in general)
by Benjamin Karhan 02 Sep '06

02 Sep '06

i noticed that the 4.4 upgrade broke LILO on Raid... it gave errors on partitions not on the primary disk along the lines of "/dev/dis: no such device"... even explicitly installing the boot sector on each device in the array, while it allowed the system to boot, gave errors at boot time and did not display the CentOS boot screen anymore... i solved the problem by creating a package for the most recent version of LILO and installing that... with a few minor changes to "lilo.conf" everything was kosker for LILO install and boot... i even made a nice new 640x480x256 CentOS boot screen for it... there is one caveat to using the new LILO... the new version (or at least one above 22.x) must be booted once (text-mode) before LILO can correctly probe the video BIOS... so, the boot screen needs to be installed after an initial priming boot... afterwards, i did some thorough testing before deploying on any production servers... and noticed only one problem... the new version of LILO broke the "grubby" probe... primarily because "/boot/boot.b" is no longer needed... but also because the comparisons between "boot.b" and the actual boot sector aren't accurate anymore either... since i'd noticed that "grubby"'s probe for GRUB itself has been broken for a while... i decided a quick patch-job for the "mkinitrd" package was in order... my new package correctly identifies whether either LILO or GRUB has been installed at all, but lacks the careful byte comparisons that were the core of the breakage of the original "grubby"... it's possibly problematic... but i doubt it... and it solves more problems than it creates... anyways... that solved my 4.4 upgrade breakage... and... since i was writing to the list... i figured i should mention a rather serious, but extremely unlikely to happen, bug i noticed in "e2fsprogs" (specifically "e2fsck")... with the version on CentOS... "e2fsck" will cause some big problems and potential data loss on directories containing more than 1.2 million inodes... the first 1.2 million inodes will be ok... the next 1.2 million (max) will be saved to /lost+found as unidentified files... before it too fills up... and then everything else will just "vanish"... this problem is due to some incorrect math in the handling of the maximum inode size... and has already been fixed in e2fsprogs 1.38... so, my solution was to take the 1.38 Fedora Core sources and build a package for CentOS... if anyone is particularly interested... i have the SRPMS for my lilo, mkinitrd, and e2fsprogs packages... also, i have the pretty new CentOS boot screen (and a few others i made) and some working lilo configurations for switching over to them... all of which i could probably post somewhere public... but if they are really useful, i'd rather ship them along to someone more closely involved in maintaining CentOS... so as to "contribute" as best i could to everyone's future well-being as well... B. Karhan simon(a)pop.psu.edu PRI/SSRI Unix Administrator

1 0

Re: [CentOS] latest kernel
by Clive Gould 02 Sep '06

02 Sep '06

Marko I have 5 servers running CentOS. Four of them work fine with the 42 kernel. The fifth I use as a yum respository and when I try to use the 42 kernel I lose all network connectivity. Reverting to the earlier kernel on this box restores connectivity. I append some dmesg excerpts which suggest that the new kernel handles PCI (GSI) differently, but have not had the time to investigate further. Please let me know if you find a solution. Best wishes Clive dmesg excerpt for 42 kernel: PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:05.0[A]: no GSI - using IRQ 11 ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 5 ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 5 ACPI: PCI interrupt 0000:00:11.1[A]: no GSI ACPI: PCI interrupt 0000:00:11.2[D]: no GSI - using IRQ 11 ACPI: PCI interrupt 0000:00:11.3[D]: no GSI - using IRQ 11 ACPI: PCI interrupt 0000:00:11.5[C]: no GSI - using IRQ 9 ACPI: PCI interrupt 0000:01:00.0[A]: no GSI - using IRQ 11 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:00:0e.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. ACPI: PCI interrupt 0000:00:06.0[A]: no GSI - using IRQ 5 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:06.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa400. Vers LK1.1.19 divert: allocating divert_blk for eth0 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI interrupt 0000:00:05.0[A]: no GSI - using IRQ 11 divert: allocating divert_blk for eth1 eth1: VIA Rhine at 0xe3000000, 00:50:ba:a1:86:44, IRQ 11. eth1: MII PHY found at address 8, status 0x7809 advertising 05e1 Link 0000. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:0e.0[A]: no GSI - using IRQ 5 divert: allocating divert_blk for eth2 eth2: RealTek RTL8139 at 0xa800, 00:10:dc:59:bd:dc, IRQ 5 eth2: Identified 8139 chip type 'RTL-8101' ACPI: PCI interrupt 0000:00:11.5[C]: no GSI - using IRQ 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:11.2[D]: no GSI - using IRQ 11 dmesg excerpt for 34 kernel: PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 5 (level, low) -> IRQ 5 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xa800, 00:10:dc:59:bd:dc, IRQ 5 eth0: Identified 8139 chip type 'RTL-8101' ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:06.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa400. Vers LK1.1.19 divert: allocating divert_blk for eth1 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth2 eth2: VIA Rhine at 0xe3000000, 00:50:ba:a1:86:44, IRQ 11. eth2: MII PHY found at address 8, status 0x7809 advertising 05e1 Link 0000. ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:11.5 to 64 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: irq 11, io base 0000b000 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 11 (level, low) -> IRQ 11 Message: 34 Date: Fri, 1 Sep 2006 15:13:02 -0400 (EDT) From: "Marko A. Jennings" <markobiz(a)bluegargoyle.com> Subject: Re: [CentOS] latest kernel To: centos(a)centos.org Message-ID: <48730.192.168.77.10.1157137982.squirrel(a)bluegargoyle.com> Content-Type: text/plain;charset=iso-8859-1 On Fri, September 1, 2006 4:04 pm, Micha Silver wrote: > Today I updated several servers running CentOS 4.3, and got the new > 2.6.9-42 kernel. One of the machines serves as our firewall. After > rebooting I lost all forwarding thru the machine. I reverted back to the > 2.6.9-34 kernel and connectivity returned. During the few minutes that > the new kernel was running I checked that the routing table looked OK, > and with tcpdump I saw that indeed no traffic was going thru from the > externel interface to any of the internal interfaces. > > Has anyone seen similar behavior?? >

1 0

Re: [CentOS] vncserver startup issue
by Bart Schaefer 02 Sep '06

02 Sep '06

Did you edit /etc/sysconfig/vncservers ?

2 1

CentOS-announce Digest, Vol 19, Issue 1
by centos-announce-request＠centos.org 02 Sep '06

02 Sep '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2006:0901 Important CentOS 4 i386 up2date - bugfix update (Johnny Hughes) 2. CEBA-2006:0901-001 Important CentOS 4 x86_64 up2date - bugfix update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 01 Sep 2006 12:48:59 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2006:0901 Important CentOS 4 i386 up2date - bugfix update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1157132939.5268.126.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Bugfix Advisory 2006:0901-001 The up2date released with CentOS-4.4 did not specifically require the new centos-release, however the new centos-release provides the /etc/sysconfig/rhn/sources file for up2date. This update changes up2date to require centos-release >= 4-4.2 which will allow up2date to be used to upgrade of CentOS from 4.3 (or older versions) to 4.4. The following updated files have been uploaded and are currently syncing to the mirrors: i386: up2date-4.4.69-25.centos4.7.i386.rpm up2date-gnome-4.4.69-25.centos4.7.i386.rpm src: up2date-4.4.69-25.centos4.7.src.rpm

1 0

vncserver startup issue
by Alex Pilson 02 Sep '06

02 Sep '06

I installed vncserver via yum and when I reboot the server it does not want to start despite being set to start upon boot. Logging in via SSH and then issuing vncserver, I am able to get it running properly. I can't seem to figure this out. Any pointers appreciated. -- <---------------------------------------------------------------> Alex Pilson FlagShip Interactive, Inc. alex(a)flagshipinteractive.com <--------------------------------------------------------------->

1 0

Yum upgrade to 4.4 problem
by Simen Thoresen 02 Sep '06

02 Sep '06

CentOS 4.3 (SMP, x86_64, Athlon64 X2) with all pre-4.4 release updates applied. Since I ran into the Yum issue at the previous upgrade, I first did yum upgrade to get the list of packages (6 to install, 206 to update). I then did yum upgrade yum (which passed without issues) yum upgrade sqlite (which passed without isseus). Fairly certain that yum now works correctly, I wanted to just do another small upgrade before doing the rest, and did yum upgrade samba [root@naboens ~]# yum upgrade samba Setting up Upgrade Process Setting up repositories Reading repository metadata in from local files <no progress> This seemed to hang, and a look at top showed yum consuming more and more memory, the system starting to swap and bog down and then become unresponsive (all swap exhausted, I was not quick enough to kill yum). I was able to reproduce this on a different machine (also x86_64, SMP and Athlon64 X2), so it seems to be an actual problem. As I can play around a bit more on this machine, I tried doing a yum upgrade (without specifying samba) and it behaves the same (ie yum consuming increasing amounts of memory while "Reading repository metadata (etc)". Has anyone else experienced and been able to resolve this? -S -- Simen Thoresen, Dolphin ICS Systems Administration and Wulfkit Support

14 27

Postfix won't relay after update to CentOS 4.4
by Kanwar Ranbir Sandhu 02 Sep '06

02 Sep '06

Hi Everyone, My CentOS 4.4 mail server is having problems sending mail after updating it to 4.4 Before the update, I did not have any problems. My ISP requires that email clients must authenticate to their mail servers before mail can be sent out. I setup smtp auth to get postfix to relay mail through the ISP's mail servers. Here's my config: main.cf -------- relayhost = [smtp.broadband.rogers.com] smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = sasl_passwd --------------- smtp.broadband.rogers.com blah@blah.com:password I've done the usual run through of config files after an update, and made some small changes to main.cf (just added in comments and examples that were in main.cf.rpmnew). When I try to send a message, this is the error I get: F060D1C068: to=<m3freak(a)rogers.com>, relay=smtp-rog.mail.yahoo2.akadns.net[206.190.36.18], delay=1, status=bounced (host smtp-rog.mail.yahoo2.akadns.net[206.190.36.18] said: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html (in reply to MAIL FROM command)) Just in case the ISP had done something, I manually tested authenticating to the ISP's mail server, and it worked just fine: Connected to smtp.broadband.rogers.com (206.190.36.18). Escape character is '^]'. 220 smtp105.rog.mail.re2.yahoo.com ESMTP ehlo krs 250-smtp105.rog.mail.re2.yahoo.com 250-AUTH LOGIN PLAIN XYMCOOKIE 250-PIPELINING 250 8BITMIME AUTH PLAIN blahblahblahblahblahblahblahblahblah 235 ok, go ahead (#2.0.0) So, the problem is on the Postfix end. I must assume something in the Postfix update broke my setup, but I can't figure out what it is. Has anyone else run into this? Am I missing something obvious? Hints appreciated. Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.17-1.2142_FC4 i686 GNU/Linux 16:11:07 up 2 days, 9:40, 3 users, load average: 1.06, 0.75, 0.62

9 17

upgrade to 4.4 hangs
by Zube 02 Sep '06

02 Sep '06

Two identical machines, both running CentOS 4.3 plus all the errata. First one: yum update went for a while and hung. At the bottom of the yum.log file was this: Aug 31 06:58:01 Updated: control-center.i386 1:2.8.0-12.rhel4.5 Aug 31 06:58:09 Updated: iiimf-le-unit.i386 1:12.1-13.EL.5 Aug The python process was in the process list, but it was consuming no CPU time. I let it go for a couple of hours, then killed it and played with the duplicate removal script posted previously. Second one: I tried a combination of suggestions previously posted: yum clean all yum update yum sqlite python-sqlite python-urlgrabber python-elementtree yum clean all yum upgrade This also ran for a while and then hung in a similar fashion. The tail of the yum.log is: Aug 31 11:29:08 Updated: at.i386 3.1.8-80_EL4 Aug 31 11:29:09 Updated: samba-client.i386 3.0.10-1.4E.9 Aug 31 11:29:21 Updated: anaconda.i386 10.1.1.46-1.cento Suggestions for future tries on other machines? Thanks much, Zube

4 6

Kind of OT: internal imap server
by Kanwar Ranbir Sandhu 01 Sep '06

01 Sep '06

Hi Everyone, I'm running a Postfix+Dovecot+SpamAssassin box in a DMZ. Everything is honkey dorey. Lately I've been thinking about moving Dovecot (for IMAP) into the internal network - I'd rather not store my mail on the CentOS 4 host in the DMZ. Not having done this before, I'm not quite sure what options I have. Also, I don't know if this is a good idea at all. So: 1. Should I just leave mail storage on the same box in the DMZ? 2. If the answer to 1 is no, what's the best way to get mail from the SMTP server in the DMZ to an IMAP server in the internal network? Here's what I've briefly considered: DMZ Postfix+SpamAssassin -> Internal Postfix+Dovecot DMZ Postfix+SpamAssassin -> Internal Fetchmail+Dovecot 3. Any tutorials for this out there, or even articles, etc., discussing using Postfix as a gateway? So far, I haven't found any that I've liked. Thanks in advance for any help. Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.17-1.2142_FC4 i686 GNU/Linux 00:49:28 up 2 days, 18:18, 3 users, load average: 0.58, 0.48, 0.29

15 78

4.4 yum update problem
by Les Mikesell 01 Sep '06

01 Sep '06

On one of my machines yum hung up while installing the updates and could not be interrupted or killed. I rebooted the machine the next day, but now a 'yum update' reports: Error: Missing Dependency: openssh = 3.9p1-8.RHEL4.12 is needed by package openssh-askpass-gnome and Error: Missing Dependency: rpm = 4.3.3-13_nonptl is needed by package rpm-build even though rpm -q says those version are installed: #rpm -q rpm openssh rpm-4.3.3-13_nonptl openssh-3.9p1-8.RHEL4.12 Now what? -- Les Mikesell lesmikesell(a)gmail.com

3 4

updating base kernel when plus kernel installed
by Robert Moskowitz 01 Sep '06

01 Sep '06

A while ago I installed 2.6.9-nnnn.plus.c4 (nnnn means version at that time, now at 42.0.2), but I have to boot with the base kernel, as the plus kernel does not seem to work with my Atheros card/drivers. Right now my base kernel is at: 2.6.9-34.0.2.EL and I have this feeling that is quite behind the current rev. I cannot figure out how to get kernel.i686 to upgrade. I can't even seem to get yum or yumex to list the package name for the current kernel rev.

4 4

Dependency failures when updating
by Tom Elsesser 01 Sep '06

01 Sep '06

I am trying to update a centos box with an unsupported kernel (for XFS support): [root@snowybunting /]# uname -a Linux snowybunting.homelinux.net 2.6.9-34.106.unsupportedsmp #1 SMP Sat Mar 18 16:22:41 CST 2006 x86_64 x86_64 x86_64 GNU/Linux To update I did: yum update python-sqlite yum clean all yum update yum yum clean all yum update ..and I get the following > 91 packages excluded due to repository protection <bunch of stuff deleted> > --> Running transaction check > --> Processing Dependency: kernel-ib for package: libibverbs > --> Processing Dependency: kernel-ib for package: libsdp > --> Processing Dependency: kernel-ib for package: dapl > --> Processing Dependency: kernel-ib for package: libmthca > --> Processing Dependency: kernel-ib for package: librdmacm > --> Finished Dependency Resolution > Error: Missing Dependency: kernel-ib is needed by package libibverbs > Error: Missing Dependency: kernel-ib is needed by package libsdp > Error: Missing Dependency: kernel-ib is needed by package dapl > Error: Missing Dependency: kernel-ib is needed by package libmthca > Error: Missing Dependency: kernel-ib is needed by package librdmacm I unprotected the repositories in /etc/yum.repo.d, then reran: yum update ...and I get the same missing dependencies errors. I don't know if I have too many things going on at once with the unsupported kernel and updating the whole base, but as of now I'm kind of stuck. Any thoughts? -- Tom Elsesser

3 3

kernel 2.6.9-42 is faster
by Jerry Geis 01 Sep '06

01 Sep '06

Gents, Under 4.3 and the associated kernel it took 17 seconds to recompile my entire application on my amd 4800+ X2. Down from 1 minute and 20 seconds on my old platform. I just tried under the new 2.6.9-42 kernel and it is 15 seconds. So that modification to the kernel for disk improvement seemed to help my compile time... Just sharing... Great work on 4.4. Jerry

8 15

4.3 to 4.4 and Yum and Upgrade vs. Update
by John Hinton 01 Sep '06

01 Sep '06

I'm wondering about yum update vs. yum upgrade. The man page says use upgrade (actually the obsoletes flag which is set in upgrade and not update) when doing something like a linux 8.0 to linux 9 upgrade. Something we can't do with CentOS, i.e. 3 to 4. So, is it better to use update or upgrade when going from 4.3 to 4.4? Doesn't RedHat call these "Quarterly Updates" and not "Quarterly Upgrades"? And, it seems that the folks having trouble were doing yum upgrade. I'm wondering if anyone is experiencing the same difficulties when doing yum update? And --obsoletes.... seems like the man page for yum really doesn't say much about what this actually does.. but it sounds like something I don't want to use... sounds like it leaves obsoletes laying around? from man page "upgrade Is the same as the update command with the --obsoletes flag set." "If the --obsoletes flag is present yum will include package obsoletes in its calculations - this makes it better for distro-version changes, for example: upgrading from somelinux 8.0 to somelinux 9." " yum list obsoletes [regexp1] [...] List the packages installed on the system that are obsoleted by packages in any yum repository listed in the config file." Could this be what's causing the conflicts with sqlite? And if update vs. upgrade doesn't make any difference (from my first question).. Has a 'clear' direction for painless updating emerged? Best, John Hinton

6 10

Driver for Symbios 8100S PCI SCSI?
by Bart Schaefer 01 Sep '06

01 Sep '06

I'm trying to install CentOS 3 on an OmniBook 800. (Am I insane?) The bootdisk.img gets things started just fine, but the closest driver on the drvblock.img disk is for the Symbios 53C896, and the Omnibook has a 53C810. Manually choosing the Symbios driver seems to discover scd0, but it's not able to load CentOS from the CD. (I've tried both the boot.iso from the os/i386/images directory, and Disk 1 from the regular set of install ISOs.) Any suggestions? Am I just out of luck? (The last Linux installed on this thing was RedHat 5.2, but that was overwritten with Windows 98 long ago.)

1 0

Re: [CentOS] Ctl+Alt+F12
by Jeff Stacey 01 Sep '06

01 Sep '06

add this to the end of /etc/syslog.conf then restart syslogd # Everything goes to tty12 (press ALT+F12 to view) *.* /dev/tty12 HTH Jeff On Fri, 2006-01-09 at 19:49 +0000, Ted Miller wrote: > I am migrating from Mandriva to Centos (currently running dual boot). One > thing I miss on Centos is being able to switch to Console 12 and see system > messages in real time. My IPCop firewall has this turned on as well. Is > this a setting I can change, or a program I can add, or is it not available? > > Ted Miller > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

1 0

mount problem on LVM2 w/ kernel-2.6.9-42.0.2
by Heitor A.M. Cardozo 01 Sep '06

01 Sep '06

Recently I update a server running CentOS 4.3 to kernel 2.6.9-42.0.2. After the update it had a problem to mount LVM partitions, showing the follow error during boot: No volume groups found Activating logical volumes Unable to find volume group "lvm1" ERROR: /bin/lvm exited abnormally! (pid 199) Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempted to kill init! Root partition is a LVM2 on Software RAID. With old kernel (2.6.9-34.0.2) the system boot normally. Any idea what is error? Best regards Heitor Augusto

1 0

post install raid1
by CentOS List 01 Sep '06

01 Sep '06

Hi, I had a CentOS running and working fine. Recently i had upgraded it to 4.4. I would like to do a raid1 on this machine. Is it possible to do it? Or do i need to reinstall the system with raid1? regards

2 1

RE: [CentOS] Re: kernel 2.6.9-42 is faster
by Alex Palenschat 01 Sep '06

01 Sep '06

> > I got a lot of equipment but all junk...you know clothes > pins, paper > > clips and tape to hold it together and cardboard boxes for cases! > > > > jr > You have cardboard! Right...(rolls up sleeves and takes a deep breath) I had to get up in the morning at ten o'clock at night, half an hour before I went to bed, eat a lump of cold poison, work twenty-nine hours a day down mill, and pay [the] mill owner for permission to come to work, and when we got home, our Dad would kill us, and dance about on our graves singing "Hallelujah." Couldn't help it... alex

3 2

Postfix and PostgreSQL
by Matthew O'Connor 01 Sep '06

01 Sep '06

Hello all, I require Postfix to have PostgreSQL support. Unfortunatly the RPM (nor the SRPM or it's SPEC file) that ships with CentOS doesn't include this. The SRPM (and it's associated SPEC file) that are made by Simon Mudd ( http://postfix.wl0.org/en/ ) do have PostgreSQL support, so I have downloaded that, tweaked the SPEC file and rebuilt an RPM that has PostgreSQL support. However, I would like to get the RPM that ships with CentOS to include this also, I know I have to contact the upstream vendors Postfix rpm maintainer, but I don't know who that is. Does anyone know who I should contact? Thanks, Matt

3 3

latest kernel
by Micha Silver 01 Sep '06

01 Sep '06

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic was going thru from the externel interface to any of the internal interfaces. Has anyone seen similar behavior??

3 2

Logwatch doesn't works on CentOS 3.8
by carlopmart 01 Sep '06

01 Sep '06

Hi all, Recently i have updagred my firewall box from CentOS 3.7 to 3.8. All works ok, except logwatch. All jobs that I have on cron works ok without problems, and system defaults crons too except logwatch. I have tried to run it manually without luck. How can I debug logwatch or how can I fix this? Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

2 2

Dump problem on USB drive
by John Masters 01 Sep '06

01 Sep '06

Hi. I am running CentOS 4.3 on a small home server just dishing up mail, music etc. to the household. I had been doing irregular backups to a 160GB USB external drive /dev/sda1 mounted as /mnt/backup using tar. Then I read somewhere that dump was better so I tried that after clearing the drive (formatted as ext3). dump -0u -f /dev/sda1 /shared took a while to finish but gave no errors however ls showed no files and df -h showed /dev/sda1 to be 4.4T in size and 100% full. I've looked at the man pages but I must be missing something! Regards, John

2 2

bootloader installed at wrong place during install
by Aleksandar Milivojevic 01 Sep '06

01 Sep '06

Hi, I've just started testing CentOS 4.4 installs. When installing on two mirrored drives, the bootloader got installed into the first partition, instead of MBR. It was a kickstart install, and I used "bootloader --location=mbr" in the kickstart file (which is also a default). However, when looking into /root/anaconda-ks.cfg file, misteriously it was changed to "bootloader --location=partition" by Anaconda!? I've noticed this happening only when installing on two mirrored drives. If installing on a single drive, the boot loader ends up in MBR as it should. The partition config was relatively simple. Two partitions on each disk, mirrored. One for /boot, one for LVM (which than contained everything else). Has anybody else experienced same problem? -- NOTICE: If you are not intended recipient, you are hereby notified that by reading this message you agreed not to disturb frogs during mating season. For more info, visit http://www.8-P.ca/

2 2

4.4 Postfix woes ?
by Rodrigo Barbosa 01 Sep '06

01 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Just like to report that exim is still working fine after the upgrade :) Sorry, bad joke. But it is 5am and I'm still working, so pardon me. - -- Rodrigo Barbosa "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFE9+xGpdyWzQ5b5ckRAqVWAKCd9nQylQQ2K3ItJ+d4Kdgel3IbAwCeMyq7 mLtX2BPA4klAQ+TwLH18ckY= =PB5l -----END PGP SIGNATURE-----

3 2

RE: [CentOS] kernel 2.6.9-42 is faster
by Mark Schoonover 01 Sep '06

01 Sep '06

chrism(a)imntv.com wrote: > Email Lists wrote: >> -> > -> >> -> > >> -> > Please, please forgive me yet How about >> -> > >> -> > C.R.F.P >> -> > >> -> > where the F kinda looks like an A or small a >> -> >> -> Lol. Took me a couple seconds. >> -> >> >> >> Well you could get funky with it and make the A's right side be >> crumbling and falling apart transforming into the F in a *graphic* >> and then people would understand better? >> > > Organisation for Leftover Defunct Superceded Hand-me-down Information > Technology. > > My wife has already labelled much of my basement with the appropriate > acronym.... Atleast you have a basement... Sigh... Mark

2 1

RE: [CentOS] OT: How to make files placed into FTP directory avai lable via http
by Mark Schoonover 01 Sep '06

01 Sep '06

Ed Morrison wrote: > I'm hoping someone out there can tell me or direct me on where to find > this info on how to make files placed into an ftp directory available > via an url link in an email. I will have a staff member upload the > files to a directory on my ftp server (which is also the web server) > and the files would have to be automatically linked to a web > directory, unless the files can be read directly from the ftp server. > This needs to have no interaction from me and should be automagic..... > > Any and all would be greatly appreciated. > > Thanks > > Ed Ed, Off the top of my head, you could create a script that will run under mod_perl and can read the ftp directory, then create a page full of URLs. Shouldn't be too hard to accomplish... Could be done under PHP as well. HTH Mark

1 0

Version of Centos
by Guillermo Garron 01 Sep '06

01 Sep '06

Hi, How do I check which version of CENTOS am I running? CentOS 4.2 or 4.4? thanks regards, Guillermo. -- Guillermo Garron (Using FC5, CentOS4.X and Ubuntu 6.06)

12 15

Helping CentOS automatically
by rado 01 Sep '06

01 Sep '06

...If you like the majority of us as I am...there is something we can do for the centos scene that really doesn't cost anything. When you download the distro...just let bittorrent seed indefinitely. By doing this you are contributing to centos as a whole. ...go figure...I'm actually giving the centos cause 17-18 KB/s and the beauty...I don't even miss it! My boxes run 24/7 anyway so why not!!! John Rose

9 20

README.txt
by Franklin S Werren 01 Sep '06

01 Sep '06

Hi All; Here is a real dumb question... I made up a README.txt for a directory On a BQ/CentOS webserver.... The file is not showing up in the directory Or the actual file README.txt What did I do Wrong ??? Works on a Raq 4 ok .... Franklin S. Werren www.bagpipes.net www.chautauqualake.net www.franksradio.net www.chautauqua.us All messages sent from this computer are scanned by more than one Virus Scanner and are Certified to be Virus Free. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.7/435 - Release Date: 8/31/2006

1 0

New X crappy for older stuff?
by William L. Maltby 01 Sep '06

01 Sep '06

While burning in a new desktop Epox KT-880 workstation, I'm running on my old K6-III at 360MHz. Before new X updates (put everything in today, kernel, elfutils, ntpd - Selinux issues? - xorg, ...) with my PCI ATI 7000 (Radeon) on a 19" Samsung 950b @ 1024x768 (one of 5 different resolutions I commonly use), I could scroll smoothly at reasonable rates. With the new stuff I get severe flickering. As if the screen is "blanking", showing a little, "blanking", showing a little, ... It's really horrible. Anybody else got some old stuff that does(n't) have symptoms? I'll say bye to this update shortly I guess, security be damned. I'm the only user and IPCop protects me. TIA BTW: 4.4? Anything left for that? :-) -- Bill

2 2

Also Postfix-Problem
by Timothy Kesten 01 Sep '06

01 Sep '06

Hi Folks, after the update 4.4 I can't use Postfix: errormessage Name service error for name=localhost type=A: Host not found or more details: Sep 1 08:40:01 main postfix/smtpd[5843]: connect from localhost[127.0.0.1] │ Se│Sep 1 08:40:01 main postfix/smtpd[5843]: E45C34B75F: client=localhost[127.0.0.1] │ Se│Sep 1 08:40:01 main postfix/cleanup[5844]: E45C34B75F: message-id=<200609010640.k816e1DH005834(a)main.jacmelaw.local> │ Se│Sep 1 08:40:01 main postfix/qmgr[5596]: E45C34B75F: from=<root(a)main.jacmelaw.local>, size=822, nrcpt=1 (queue active)│ Se│Sep 1 08:40:01 main sendmail[5834]: k816e1DH005834: to=root, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mai│ Se│ler=relay, pri=30344, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (Ok: queued as E45C34B75F) │ Se│Sep 1 08:40:02 main postfix/smtpd[5843]: disconnect from localhost[127.0.0.1] │ Se│Sep 1 08:40:02 main postfix/smtp[5845]: E45C34B75F: to=<root(a)main.jacmelaw.local>, relay=none, delay=1, status=bounce│ Se│d (Host or domain name not found. Name service error for name=localhost type=A: Host not found) Some of my ... /etc/hosts 127.0.0.1 localhost localhost 192.168.0.100 main.jacmelaw.local main 192.168.0.3 meister.goodlack.local meister 192.168.0.6 andrea.goodlack.local andrea main.cf myhostname = main.jacmelaw.local mydomain = jacmelaw.local myorigin = $mydomain inet_interfaces = localhost mydestination = $myhostname, localhost, $mydomain, localhost.$mydomain More information needed? Please, give me some help Thx Timothy

4 17

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss