- Discuss - lists.centos.org

RE: [CentOS] Emailing from Command Line
by Mark Schoonover 16 Jul '06

16 Jul '06

Thanks Guillermo. The thing is, I can send test emails outside my domain no problem. I can't send emails to my internal smtp server from any CentOS system on my internal network. I discovered that I didn't have an MX record in tinydns for my internal network, so I added that. After testing, no changes - any email that's destined to any address to my domain bounces with the error message listed below. I'm not a sendmail person, would rather do without it, but I don't think I can simply remove it from CentOS. I could install postfix, or qmail and see how that works, but it's serious overkill for sending simple emails internally... Had hopes ssmtp would work, but that doesn't either. Works on Gentoo systems, just not CentOS. A hair puller that's for sure, but I'll keep banging on it until it works. Thanks for all the ideas, if anyone can think of anything else, I'll try it! Mark -----Original Message----- From: Guillermo Garron [mailto:guillermo.fedora@gmail.com] Sent: Saturday, July 15, 2006 7:48 PM To: CentOS mailing list Subject: Re: [CentOS] Emailing from Command Line Hi, maybe you should try using an externa smtp to send you the emails. And use sendmail as a client of that other smtp, your ISP smtp. after having that configured you could try to send emails somewhere else, @ yahoo.com <http://yahoo.com> or @ gmail.com <http://gmail.com> as suggested here. regards, Guillermo Garron On 7/14/06, Karanbir Singh < mail-lists(a)karan.org <mailto:mail-lists@karan.org> > wrote: Mark Schoonover wrote: > Karanbir Singh wrote: >> Mark Schoonover wrote: >>> ----- Transcript of session follows ----- >>> 550 5.1.2 < admins(a)amgt.com <mailto:admins@amgt.com> >... Host unknown (Name server: amgt.com <http://amgt.com> : >>> no data +known) >>> >> is sendmail aware of your actual manchine hostname and howto handle >> emails for this domain ? > > Beats me, I'm a qmail guy, not sendmail. The part I'm confused about is > ssmtp should handle things w/o an MTA running... sendmail on the local machine should know what the hostname is. its possible that ssmtp isnt where the problem is but the smtp hander on the Rx end of things. Try sending emails elsewhere ? to an @ gmail.com <http://gmail.com> maybe ? Alternatively, have you tried nut ? it should be available in most repo's. Does a fairly good job of sending emails from the command line ( and is what I tend to use ) -- Karanbir Singh : http://www.karan.org/ <http://www.karan.org/> : 2522219@icq _______________________________________________ CentOS mailing list CentOS(a)centos.org <mailto:CentOS@centos.org> http://lists.centos.org/mailman/listinfo/centos <http://lists.centos.org/mailman/listinfo/centos>

2 1

RE: [CentOS] Emailing from Command Line
by Mark Schoonover 16 Jul '06

16 Jul '06

Karanbir Singh wrote: > Mark Schoonover wrote: >> >> ----- Transcript of session follows ----- >> 550 5.1.2 <admins(a)amgt.com>... Host unknown (Name server: amgt.com: >> no data +known) >> > > is sendmail aware of your actual manchine hostname and howto handle > emails for this domain ? Beats me, I'm a qmail guy, not sendmail. The part I'm confused about is ssmtp should handle things w/o an MTA running... Thanks! Mark

3 2

Dumb question about a Xeon Procesor
by Erick Perez 15 Jul '06

15 Jul '06

Sorry to ask here but never used a Xeon before. Tomorrow i need to install Centos 4.3 on a Quad Xeon (not dual core). Xeon is a 32 bit or 64 bit system? I already have centos 4.3 x86_64 on a Dvd and im not sure if i need to download another ISO or can I use the one i have? Again, sorry to ask. -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------

3 3

extract *.rar files
by Mark Quitoriano 15 Jul '06

15 Jul '06

What program should i use to extract rar files on linux? -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

3 4

Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

Hi all, I try to install CentOS 4.3 for X64_64 on a new Dell PowerEdge 2950. I have two problems: 1. After booting from CD I pressed 'return' to start installation (BIOS-support for USB-keyboard works). After probing the hardware my USB-Keyboard is not working anymore. Dell removed ALL PS/2-Interfaces so I have to use USB. When I start installation with 'linux noprobe' the keyboard still is working and the installation starts. 2. After the installation starts it tries to load the storage drivers. In the case for this hardware it tries to load megaraid_sas. But it can't load the driver without an error. The installer just says:"loading megaraid_sas" for hours and hours (the complete last night). When I start with 'linux noprobe' I'm able to look at another console (alt+F2) and can try 'lsmod'. The output for megaraid_sas is 'loading' and not 'live' (again: for hours). Does anyone knows how I can solve these problems? Is kudzu not working correct for the first one? Thanx Jörg

3 2

RE: [CentOS] Linux kerberos to Windows AD 2000/2003
by King, John (Greg) (LMIT-HOU) 14 Jul '06

14 Jul '06

blah hit next on my google search and got this link hehe go figure it is the first link AFTER I finally ask for help http://windows.ittoolbox.com/documents/tutorials/integrating-samba-3-in- to-a-windows-2003-domain-1893 but if anyone has more links to share please do ________________________________ From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of King, John (Greg) (LMIT-HOU) Sent: Wednesday, July 05, 2006 9:02 AM To: centos(a)centos.org Subject: [CentOS] Linux kerberos to Windows AD 2000/2003 I have spent the last 4-5 hours scrounging google articles on this and have found 2 solutions. The problem is one of them is something that we will not do (as MS will not support extending AD with Services For Unix(SFU)). The other is simply configuring kerberos and pam on the linux system. No problem there from what I can tell. Ticket cache: FILE:/tmp/krb5cc_0 Default principal: userid(a)dom.ain Valid starting Expires Service principal 07/05/06 07:23:03 07/05/06 17:23:47 krbtgt/DOM.AIN(a)DOM.AIN renew until 07/06/06 07:23:03 Kerberos 4 ticket cache: /tmp/tkt0 klist: You have no tickets cached The problem though is configuring winbind from the console (all of the linux systems are nothing more than the kernel, ssh and the few apps necessary for the system to do it's job). All the online examples I have been able to find use the linux GUI. Does anyone know of a document (or mind sharing) how they installed and configured the samba 3 winbind daemon to map SID's to unix uid's/gid's? That would eliminate the need to extend the active directory schema. thanks, Greg

2 1

creating disk images
by Jerry Geis 14 Jul '06

14 Jul '06

On 7/14/06, Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ />/ I am familiar with using dd to create a disk image. dd if=/dev/hda1 />/ of=myimge.img />/ />/ However, is there a way to capture the entire disk image into a file. / >Replacing /dev/hda1 in your dd line by /dev/hda used to work. >-- >Eduardo Grosclaude >Universidad Nacional del Comahue >Neuquen, Argentina Thanks, I'll try that... Any way to drop the size of the created image? Ex: disk is 100G and I no longer need all the extra space. perhaps only 20Gig image instead of the full 100Gig. Thanks, Jerry

3 2

creating disk images
by Jerry Geis 14 Jul '06

14 Jul '06

I am familiar with using dd to create a disk image. dd if=/dev/hda1 of=myimge.img However, is there a way to capture the entire disk image into a file. I have 3 partitions: hda1 / hda2 swap hda3 /home and mbr How can I wrap them all into 1 image file. Thanks, Jerry

2 1

postfix conf for use external smtp
by Guillermo Garron 14 Jul '06

14 Jul '06

Hi all, i wonder how to configure postfix make it use externa smtp server i tried the following relayhost = my.stmp.com smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = $smtp_sasl_security_options smtp_use_tls = yes in /etc/postfix/sasl_passwd i have my.smtp.com user:password then i postmap /etc/postfix/sasl_passwd restart the postfix, but now i have this problem. Jul 14 12:06:33 garron postfix/smtp[8510]: ECA31F3009D: to=< ggarron(a)hotmail.com>, relay= my.smtp.com, delay=2, status=deferred (Authentication failed: cannot SASL authenticate to server scz.alketech.com[ 200.87.61.8 3]: no mechanism available) i tried with smtp_sasl_security_options = noanonymous smtp_sasl_security_options = noplaintext, noanonymous smtp_sasl_security_options = but never works, with the second i got the error up. with the other it does not even try to login. i also saw this. when i issue this command as root postmap -q my.stmp.com hash:sasl_passwd i go this error Jul 14 13:12:13 garron postfix/postmap[9123]: fatal: open database sasl_passwd.db: Permission denied i tried even with 777 permissions any clues? regards, Guillermo.

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

that doesn't work - if I linux dd=nfs:<io>:<path> the installer hangs with 'loading megaraid_sas' and no USB-device is working (so I can't see whether this is the driver included in CentOS or the driver loaded via NFS) when I try with linux expert noprobe dd=nfs:<io>:<path> I must load the network drivers by hand first but then I can not specify to load the driverdisk via NFS _and_ I'm not able to load the driver via USB-floppy/stick and linux dd=/dev/device is not working because NO usb-device is working - no usb stick - no usb floppy - no usb mouse -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:57 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > how can I tell him where to find the drivers? the installer always > tries to use /dev/hda put dd=/path/to/drivers on the end of your entry at the installer prompt. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

RE: [CentOS] how to upgrade clamav?
by Bowie Bailey 14 Jul '06

14 Jul '06

spart cus wrote: > Craig White <craigwhite(a)azapple.com> wrote: > On Thu, 2006-07-13 at 18:29 -0700, spart cus wrote: > > hi guys, > > how can i upgrade my clamav without affecting my mail server. im > > using centos4.2 mailscanner, spamassassin and clamav. i recently > > found some logs when i issued freshclam, saying i have to upgrade > > it. > ---- > did you get it from a configured yum repository? > > yum update > > did you compile from source? you can do it again then. > > > Hi Craig, > > i just did the yum install clamav clamav-devel before and used perl > > -MCPAN to install clamav perl module.what process will i do ? Same thing. Install the new versions: yum update clamav clamav-devel Use perl -MCPAN to install the newest clamav perl module (if needed). Restart the services: service clamd restart service freshclam restart (depending on the names of your init files, of course) There will be a short interruption in clamd availability while it restarts, but it can't be helped. -- Bowie

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

ok - I will try that -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:57 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > how can I tell him where to find the drivers? the installer always > tries to use /dev/hda put dd=/path/to/drivers on the end of your entry at the installer prompt. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

how can I tell him where to find the drivers? the installer always tries to use /dev/hda -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:41 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > ok - I tried this too. But CentOS tries to find the floppy as /dev/hda > which is not the device for the USB-Floppy. Dell ships one with the > server because no one is integrated. So when I try to include the > driver disk the installer is not able to find it. So put the driver disk on a local network NFS share, webserver or usb memory stick. It doesn't have to be an actual floppy disk (people still use those?). I usually toss all the drivers I'm going to need for an install at work onto a usb memory stick and let the installer pick them up from there. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

ok - I tried this too. But CentOS tries to find the floppy as /dev/hda which is not the device for the USB-Floppy. Dell ships one with the server because no one is integrated. So when I try to include the driver disk the installer is not able to find it. -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 13:30 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation > Does anyone knows how I can solve these problems? Is kudzu not working > correct for the first one? You need driver disks from your vendor to load the megaraid_sas module. You should be able to find them at linux.dell.com. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Emailing from Command Line
by Mark Schoonover 14 Jul '06

14 Jul '06

Thanks for reading, I need certain shell scripts to email me after they are done running. I've installed ssmtp to forward to my internal SMTP server. I have a working ssmtp config on a Gentoo system that works just fine, but on CentOS it's not working. Here's a bounce message: Date: Thu, 13 Jul 2006 13:33:22 -0700 From: Mail Delivery Subsystem <MAILER-DAEMON(a)backups.amgt.com> To: <root(a)backups.amgt.com> Subject: Returned mail: see transcript for details Auto-Submitted: auto-generated (failure) [-- Attachment #1 --] [-- Type: text/plain, Encoding: 7bit, Size: 0.3K --] The original message was received at Thu, 13 Jul 2006 13:33:22 -0700 from backups.amgt.com [127.0.0.1] ----- The following addresses had permanent fatal errors ----- <admins(a)amgt.com> ----- Transcript of session follows ----- 550 5.1.2 <admins(a)amgt.com>... Host unknown (Name server: amgt.com: no data +known) [-- Attachment #2 --] [-- Type: message/delivery-status, Encoding: 7bit, Size: 0.3K --] -N +- 2/3: Mail Delivery Subsys Returned mail: see transcript for de -- (11%) DNS does work, and I have an MX record to my internal SMTP server, even though the ssmtp doesn't use DNS/MX records to forward email. I've also tried turning sendmail on/off as well. Where else should I look?? A typical command I'm using to email from the shell is this: mail -s "Test de Backups" foo(a)bar.com < /dev/null ... Any help, most appreciated! Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816

3 3

RE: [CentOS] Simple backup program
by Bowie Bailey 14 Jul '06

14 Jul '06

Les Mikesell wrote: > On Wed, 2006-06-14 at 13:09 -0400, Bowie Bailey wrote: > > > > I am looking for a simple backup program that I can use to > > > > backup a CentOS box to a local tape drive. > > > > http://flexbackup.sf.net > > > > > > I used that for years, but the network grew and needed a "bigger" > > > solution so I switched to backuppc which is working great. > > > > I'm using backuppc. I just need something to dump the backuppc > > machine to tape for an offsite or last-resort backup. The problem > > is that backuppc is currently using 161GB (compressed) and the > > tapes only hold 40GB each, so I need something with some sort of > > intelligent tape-spanning capability. > > You are going to have more trouble than that. Backuppc will have > millions of hardlinks in that 161GB and nearly all file oriented > backup programs will take an impractical amount of time to deal > with them. And restoring will be even worse - basically everything > ends up building a table of inode numbers and scanning it for a match > on every hardlink. True, but this will only be used as a last-case scenario for restores, so in that case I'm willing to wait a bit. > > I haven't seen flexbackup. I'm currently evaluating afbackup. > > You really want a matching external hard drive so you can > dd an image copy to it. There has been quite a bit of discussion > on this topic on the backuppc mail list and I'm not sure anyone > has come up with an ideal solution. Or, you can use the 'archive > host' feature of backuppc to generate tar images of backup runs > optionally compressed and split to fit your media, but these > are copies of individual hosts and you loose the pooling feature. I agree that hard drives are faster, larger, and cheaper than tapes, but I can drop a tape onto a concrete floor and reasonably expect it to work afterwards. A hard drive might still work, but I wouldn't want to bet on it. -- Bowie

3 2

how to upgrade clamav?
by spart cus 14 Jul '06

14 Jul '06

hi guys, how can i upgrade my clamav without affecting my mail server. im using centos4.2 mailscanner, spamassassin and clamav. i recently found some logs when i issued freshclam, saying i have to upgrade it. tnx. --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

2 2

Minimum steps needed to get horde working with a single pop3 server?
by Drew Weaver 14 Jul '06

14 Jul '06

I installed horde/Imp via yum and I am having difficulty getting it to function with my single POP3 server. I defined my external POP3 server in imp/config/servers.php, but every time I type in a POP3 username and password into the login screen it takes me to a blank redirect.php. Anyone have any idea whats going on? Note, all I did to setup apache was change the document root from /var/www/html to /usr/share/horde Thanks, Andrew

2 1

Suspend and/or Hibernate
by Sean Carolan 13 Jul '06

13 Jul '06

I asked about ACPI several weeks ago but received no responses. Are suspend and hibernate features not supported in CentOS yet? I noticed there is a daemon for acpi: [scarolan@kalki ~]$ chkconfig --list | grep acpi acpid 0:off 1:off 2:off 3:on 4:on 5:on 6:off But how do I use this feature? Normally I'm accustomed to this being a menu option when I log out (eg, on recent versions of Fedora or Ubuntu). I noticed in /etc/acpi/events/ there is a file called sample.conf which configures the power button to attempt a graceful shutdown. How can I add a 'suspend' or 'hibernate' feature and bind it to a keyboard combination? thanks Sean

6 6

Web page development, NVU: anybody with experience?
by William L. Maltby 13 Jul '06

13 Jul '06

Hi folks, I think this *might* be a product that the CentOS-affiliated community might like to include? I decide to buy a new truck because I don't drive my 'Vette enough to justify it and I can really use a P/U. Thought I would take advantage of RoadRunner's free home page (<= 5MB) to post pics, etc. to sell it. XML, HTML, SGML, DocBook... what's a n00b to do? Still working on getting my LVM fully config'd so I can test testdisk and I find I want to do this first (could almost pay for the trk). Found nvu 1.0 here http://www.nvu.com/download.php and downloaded this http://www.nvu.com/download/linux/1.0/nvu-1.0- RedHat_and_Fedora/nvu-1.0-1.rhel4.fs.i386.rpm (kde version, non-kde also available) which is supposed to be compatible with CentOS AFAICT. It installs and starts up OK on my fully updated 4.3 (including this A.M.s mutt and php updates). Well, *that's* enough by itself to ask one of the great CentOS associated repo folks to make it available for all of us. It's intended for "casual users" I guess and if no one has anything bad to say about it, other than it's for insophisticates like myself, I'd like to see it in the CentOS community and available. Any comments? It's open, free, has some financial support from this product http://www.linspire.com/lindows_sales_intro.php. Only neg I see at the outset is that it's been a little dormant. As I use it, I'll post thoughts if anybody requests such. -- Bill

1 1

RE: [CentOS] Speaking of 3Ware/RAID/SATA/9550SX...
by Mark Schoonover 13 Jul '06

13 Jul '06

Yes, I did try to boot off a 4.5TB device. Now, the individual partitions are: / 1GB /dev/sda2 ext3 /boot 250MB /dev/sda1 ext2 (Marked as primary partition.) swap 1024 /dev/sda3 ext3 /data 4.449TB /dev/sda4 ext3 All 9 drives are RAID5 together via the 3Ware card. Tomorrow, I'll don my earplugs and create a small 1TB RAID device to install CentOS, then RAID5 the remaining 7 drives for all the data. I'l recreate the partitions above in the 1TB array, then use LVM to add the remaining 3.5TB into the LVs I need. I could also read up on array carving, that's new to me. Thanks for all the help on this, I really thought I was doing something silly with the BIOS or some other setting. Didn't realize I would be running into limits of the OS. Now, if anyone knows how to tune this thing for best write performance, that would be really cool. This server is part of a tapeless backup system using rsync. There's a good howto in the Linux Hacks book. We started from that, and it's just grown into a fully automated system that does hourly, daily and weekly backups. Plus, it sends it offsite to a colo location.... In case people were wondering why so much disk space... Mark

2 1

RPM: any better way to reinstall only certain files?
by William L. Maltby 13 Jul '06

13 Jul '06

My former primary boot disk had some bad spots appear awhile back. Damage, per rpm --verify, seems to be predominately in loss of reference files in /usr/share/doc and such as that. Being the type that wastes my own time before wasting that of others, I did a semi-careful perusal of the rpm man pages. Thought the --files or some such might offer a way ought. IIUC, nope! Seems that I can't select specific files. It looks like I could do a new install in a new root (chrooted) and then copy the files out, but I was already aware of an apparently easier way I had used years ago, rpm2cpio (easier because I can use the verify output list, slightly edited and reduced, to select the desired files. Thought "Well, it probably can do what I want, I just missed it. Maybe tutorials, HOWTOs, etc. will give the answer". So, using the TOC of each of these, I probed in vain (in that vein, it was fruitless but not painless :-). http://fedora.redhat.com/docs/drafts/rpm-guide-en/ http://www.rpm.org/max-rpm-snapshot/ http://www.redhat.com/magazine/001nov04/features/betterliving/ http://www.redhat.com/magazine/002dec04/features/betterliving-part2/ I've settled on rpm2cpio unless someone can point me in a better direction. TIA -- Bill

4 10

CentOS-announce Digest, Vol 17, Issue 4
by centos-announce-request＠centos.org 13 Jul '06

13 Jul '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0539 Important CentOS 4 ia64 vixie-cron - security update (Pasi Pirhonen) 2. CESA-2006:0539 Important CentOS 4 axp vixie-cron - security update (Pasi Pirhonen) 3. CESA-2006:0539 Important CentOS 4 s390(x) vixie-cron - security update (Pasi Pirhonen) 4. CESA-2006:0577 Moderate CentOS 4 ia64 mutt - security update (Pasi Pirhonen) 5. CESA-2006:0577 Moderate CentOS 4 axp mutt - security update (Pasi Pirhonen) 6. CESA-2006:0577 Moderate CentOS 4 s390(x) mutt - security update (Pasi Pirhonen) 7. CESA-2006:0568 Moderate CentOS 4 ia64 php - security update (Pasi Pirhonen) 8. CESA-2006:0577 Moderate CentOS 3 ia64 mutt - security update (Pasi Pirhonen) 9. CESA-2006:0568 Moderate CentOS 3 ia64 php - security update (Pasi Pirhonen) 10. CESA-2006:0577 Moderate CentOS 3 s390(x) mutt - security update (Pasi Pirhonen) 11. CESA-2006:0568 Moderate CentOS 4 axp php - security update (Pasi Pirhonen) 12. CESA-2006:0568 Moderate CentOS 3 s390(x) php - security update (Pasi Pirhonen) 13. CESA-2006:0577 Moderate CentOS 3 i386 mutt - security update (Tru Huynh) 14. CESA-2006:0577 Moderate CentOS 3 x86_64 mutt - security update (Tru Huynh) 15. CESA-2006:0568 Moderate CentOS 3 i386 php - security update (Tru Huynh) 16. CESA-2006:0568 Moderate CentOS 3 x86_64 php - security update (Tru Huynh) 17. CESA-2006:0568 Moderate CentOS 4 s390(x) php - security update (Pasi Pirhonen) 18. CESA-2006:0577-01: Moderate CentOS 2 i386 mutt security update (John Newbigin) 19. CESA-2006:0539 Important CentOS 4 x86_64 vixie-cron - security update (Johnny Hughes) 20. CESA-2006:0539 Important CentOS 4 i386 vixie-cron - security update (Johnny Hughes) 21. CESA-2006:0577 Moderate CentOS 4 i386 mutt - security update (Johnny Hughes) 22. CESA-2006:0577 Moderate CentOS 4 x86_64 mutt - security update (Johnny Hughes) 23. CESA-2006:0568 Moderate CentOS 4 i386 php - security update (Johnny Hughes) 24. CESA-2006:0568 Moderate CentOS 4 x86_64 php - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 12 Jul 2006 21:56:16 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2006:0539 Important CentOS 4 ia64 vixie-cron - security update To: centos-announce(a)centos.org Message-ID: <20060712185616.GH22010(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0539 https://rhn.redhat.com/errata/RHSA-2006-0539.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/vixie-cron-4.1-44.EL4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Re: [CentOS-announce] CESA-2006:0577 Moderate CentOS 3 i386 mutt - security update
by David Hrbáč 13 Jul '06

13 Jul '06

Tru Huynh napsal(a): > i386: > updates/i386/RPMS/mutt-1.4.1-3.5.rhel3.i386.rpm > > source: > updates/SRPMS/mutt-1.4.1-3.5.rhel3.src.rpm > Well, maybe I'm wrong, but I do not see any yesterday updates on mirrors. David Hrbáč

3 3

format fat32 filesystem
by Mark Quitoriano 13 Jul '06

13 Jul '06

Hi, when i run mkfs using this command mkfs -t vfat /dev/sda5 i get this mkfs.vfat: No such file or directory is there a module i need to install to support vfat? -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

3 4

RE: [CentOS] Speaking of 3Ware/RAID/SATA/9550SX...
by Mark Schoonover 13 Jul '06

13 Jul '06

Joshua Baker-LePain wrote: > On Wed, 12 Jul 2006 at 10:16am, Mark Schoonover wrote > >> I just built up a server running CentOS 4.3, and trying to boot from >> a 3Ware 9550SX-16ML, 16 port card. This system has 9x500GB drives, >> AMD Opteron, Tyan K8SD mobo and 1 GB of ram. I downloaded the latest >> (9.3.0.4) driver from 3Ware, and after a couple of botched attempts, >> I got CentOS installed. In my two botched attempts, the problem was >> X hanging during the formatting of the drives, so I switched to >> another virtual screen while formatting took place, and the system >> didn't freeze. >> >> My problem now is the system won't boot. I know this is not exactly >> a CentOS problem, I'm just hoping some kind sole would help me outta >> this overworked fog I'm in. When the system tries to boot, the >> cursor just sits there in the left corner of the screen flashing. >> Nothing happens. I am probably missing something very simple, that >> will cause me great public embarrassment, but I really don't care >> right now. > > How is your array setup? You can *not* boot from a device >4TiB. On > such a device, you must use a gpt disklabel and neither grub nor LILO > support such. My array size is 4.5TB. It's just one large single RAID5, so it's slightly less than 4.5TB. So, what you're saying then is to either put a small single HD to install CentOS, or make the array smaller than 4.5TB. I could easily make something much smaller, say ~1TB, install CentOS on that. Once that's finished, create the rest of the array as another array at the size that I need. Could use LVM to stitch it all together... I'll give this a try, thanks for the help. Mark

4 5

AMD 64 - I20/ I20_blocks
by Karl R. Balsmeier 13 Jul '06

13 Jul '06

I'm trying to install either 32-bit or 64 bit centos 4.3 and I keep getting an error: "No valid devices were found on which to install filesystems". In checking BIOS and RAID, everything seems fine, but I just found some research about I20. An alternative would be the i2o_blocks module. How can I install CentOS 4.3 x86_64 using i2o_blocks? How do I instruct the boot prompt to find this driver and get me past the above error? Even in 32-bit I still get this error as well. -karl

5 7

tftp question
by Jerry Geis 12 Jul '06

12 Jul '06

I have tftp running on a computer. done with yum install tftp and yum install tftp-server. The computer has 2 network cards in it. Everything else on this computer is working fine. My tftp config is : # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -v -s /tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } When I am on the computer and I "tftp localhost" an request a file it will give it to me. when I "tftp localip" it will say connection timeout, when I "tftp INTERNETIP" is says connection refused. note localhost, localip and INTERNETIP are all the same computer. I have the firewall allowing tftp ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:tftp ACCEPT udp -- anywhere anywhere state NEW udp dpt:tftp What might I be missing here? Thanks, Jerry

4 3

Problem with CentOS 4.3 and ldap
by Myron Williams 12 Jul '06

12 Jul '06

I currently have a server with centos 4.3 setup to do email. I use sendmail as the receiving agent and Dovecot as the pop/imap server. Users authenticate off of a openldap server. Under a light load things appear to work fine. However under a moderately heavy load connections are left open in a waiting state. This causes some email to bounce with user unknown, users authentications fails with bad username/password all with valid accounts. I am trying to figure out what the cause is to fix it but with out success. By restarting ldap and the ldap server I can minimize the problem because the connections get reset. I find nothing when I google on the subject. I don't believe this is a problem with the ldap server because I have a Fedora core machine using it without problems. Any help or ideas on how to track down the problem would be appreciated. Myron Williams

2 1

Hardware Raid cards RAID 0 / 1
by Chris Heiner 12 Jul '06

12 Jul '06

Last week we tried to install Centos on a brand new HP ML150 G2 with AIC-8130/ Marvell SATA Raid card and it was a no go. We tried a few other flavors of Linux as a test and all had trouble as well. Unfortunately time didn't permit so we opted for a Windows solution to get the box into production. We have never had a problem with IDE and Embedded SATA (Non Raid) Next time we want to research the SATA compatibility a head of time. Any suggestions? What cards have worked for you? Thanks.

6 10

RE: [CentOS] Speaking of 3Ware/RAID/SATA/9550SX...
by Mark Schoonover 12 Jul '06

12 Jul '06

Simon Banton wrote: >> not if you used the DD at install time, the system will be ready to >> go from post-install-reboot fine. > > ... but don't then do what I did, and run yum update (upgrading the > kernel in the process) immediately after the post-install-reboot. Doh! > > S. Well, you can but then you'll need to mkinitrd to have the updated driver available during booting... HTH Mark

1 0

Freenx full screen mode problem fixed in 0.5.x?
by Steve Bergman 12 Jul '06

12 Jul '06

In early June, there was an update from freenx 0.4.x to 0.5.x in centosplus. It broke full screen mode for Linux clients. I am aware of the ctrl-alt-f workaround. But I have quite a few users at branch offices who depend on NX and with employee turnover and all, it has been a source of confusion for us. Has anyone come up with a fix so that fullscreen works without crtl-alt-f? I've searched the freenx/knx list and have found no mention of anyone there having problems. Just the centosplus version. I prefer to continue using the CentOS-provided package, though. Thanks for any assistance. -Steve

1 0

Speaking of 3Ware/RAID/SATA/9550SX...
by Mark Schoonover 12 Jul '06

12 Jul '06

I just built up a server running CentOS 4.3, and trying to boot from a 3Ware 9550SX-16ML, 16 port card. This system has 9x500GB drives, AMD Opteron, Tyan K8SD mobo and 1 GB of ram. I downloaded the latest (9.3.0.4) driver from 3Ware, and after a couple of botched attempts, I got CentOS installed. In my two botched attempts, the problem was X hanging during the formatting of the drives, so I switched to another virtual screen while formatting took place, and the system didn't freeze. My problem now is the system won't boot. I know this is not exactly a CentOS problem, I'm just hoping some kind sole would help me outta this overworked fog I'm in. When the system tries to boot, the cursor just sits there in the left corner of the screen flashing. Nothing happens. I am probably missing something very simple, that will cause me great public embarrassment, but I really don't care right now. Yes, I set the bios to boot from the 3Ware card, and CentOS install did show grub stage(1) and stage(2) getting installed. After that, I'm not exactly sure where to look. I googled, and went through the 3Ware KB, but not much luck there... Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816

7 7

Raid 1
by CentOS List 12 Jul '06

12 Jul '06

Hi, Is there a tutorial on how to setup raid 1? I like to install CentOS 4.3 on a 160GB SATA drive and do a mirror on another identical 160GB SATA. Thanks

4 4

CentOS in spamcop?
by Mike Kercher 12 Jul '06

12 Jul '06

http://www.spamcop.net/w3m?action=blcheck&ip=72.21.40.12 Luckily, I'm not blocking on SpamCop, but scoring with it! Mike

4 6

Kernel-utils stupidities (readahead and cpuspeed)
by Simen Thoresen 12 Jul '06

12 Jul '06

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions - readahead and readahead_early and also the cpuspeed have a few problems; readahead 'reads ahead' (stats to copy to cache for speedy access?) the files found in /etc/readahead.files. While most of these files are various images and common binaries, some are libraries which have been replaced by newer versions, thereby reducing the usefulness of readahead. Readahead.early uses a different file (/etc/readahead.early.files) to cache useful system libraries, including a few kernel modules - for the 2.6.3-2.1.238.2 kernel. Both readahead and readahead.early are installed as disabled. chkconfig lists them as 'off' in all runlevels. Worse, cpuspeed. This is from an Athlon64 system, so it is possible that this behavior is different on non powernow-k8 systems. On the CentOS4-x86_64 kernels, the cpuspeed-drivers are built into the kernel. Here, cpu speed-management works, as the /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver -file exists (tested for in /etc/init.d/cpuspeed). On CentOS4-i386, the powernow-k8-module is not built into the kernel, so the above test fails, and the cpuspeed startscript exits. There seems to be a plan for this. The /etc/cpuspeed.conf file can specify a DRIVER variable, but no attempt is made to insmod this, so even if this is set, cpuspeed still fails. A simple fix is to check for the presence of the above /sys entry, and if that is missing, modprobe $DRIVER. Without this, cpuspeed will never work on my systems. Does it work elsewhere? Yours -S -- Simen Thoresen, Dolphin ICS

3 3

3ware SATA RAID Card
by Jon 12 Jul '06

12 Jul '06

I've a 3ware Escalade 8006-2 and run Centos 4.2 using the latest kernel 2.6.9-34.0.2.ELsmp. I see that the card comes with some disk management tools called 3DM2 Management Utility. Is this ok to install? Is it good for reporting failed drives? Thanks Jon ___________________________________________________________ All New Yahoo! Mail Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html

4 3

CentOS Folding Team moving on up
by Max H. 11 Jul '06

11 Jul '06

No one's bothered to mention Folding in awhile...;) I see we're at 285. Moving up in the world! We're now on page 3 at <http://folding.extremeoverclocking.com/team_list.php?s=&p=3>! We need more power! Max

1 0

IPTABLES don't solve name HOST - CENTOS 4.3
by Adriano Frare 11 Jul '06

11 Jul '06

Dear Friends, When I execute below command iptables -A FORWARD -d chatenabled.mail.google.com -j DROP I have received follow messages. iptables v1.2.11: host/network `chatenabled.mail.google.com' not found Thanks Adriano Frare

7 11

Notebook suspend instructions -- Gentoo to Centos
by Robert Moskowitz 11 Jul '06

11 Jul '06

At: http://www.linux.com/article.pl?sid=06/05/24/1716222 are instructions for implementing suspend mode on a Linux notebook, but the script is for Gentoo and it seems like Centos needs something else. As this puts my system REALLY fast into Suspend, but it never comes back out. Further the temp file: var/tmp/video_state.XXXXXX is empty, so something is not right. Now for my system, HP NC4010, cat /sys/power/state results in: standby mem disk (I think that is the list, definitely 3 items with the 2nd being mem). I ASSuME that this meets what the instructions tell you need to see if your notebook supports acpi suspend. But grep ACPI_SLEEP KERNEL_CONFIG does not seem to have a SLEEP line. Well maybe I was not looking in the right place for the kernel_config. I was looking in /usr/src/ But echo -n mem > /sys/power/state really puts my system into a suspend mode fast. Perhaps part of the problem is with cat /proc/bus/pci/$ID > $TMP_FILE as there are a couple of directories in this directory. It is rather hard to supply more detailed information, as I have to keep rebooting between XP and Linux until I get Thunderbird migrated...

1 0

Hosting
by Mace Eliason 11 Jul '06

11 Jul '06

Hi I am using Centos 4.3 to host various web sites that I maintain. I am finding that I am getting more and more, and I have thought of setting up a hosting server to make things quicker for my self. I have setup webmin with virtualmin and it seems to work fine so far. What is everyone else using. I don't want to invest alot of money, but would like some thing that is quick and easy to setup a domain and mysql database, ftp etc. Right now I have to edit httpd, etc etc. Thanks Mace

10 9

SATA RAID Cards
by WipeOut 11 Jul '06

11 Jul '06

Hi, Which SATA RAID cards work natively on Centos 4.x?? I have heard that the only one supported is the 3ware cards but not sure if that requires a driver to be added or if it just works out the box.. Also would like to know of alternatives.. Thanks..

8 9

RE: [CentOS] Hosting
by Todd Reed 11 Jul '06

11 Jul '06

If you use the Bastille Scripts or the iptables to help secure access to webmin, you can defeat some of the exploits. Also, move the webmin port to something other than 10000! --Todd -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Ralph Angenendt Sent: Tuesday, July 11, 2006 8:24 AM To: centos(a)centos.org Subject: Re: [CentOS] Hosting Charles Lacroix wrote: [please trim your mails, some of us only have 10GB of mail storage] > Recently i configured a webserver for a friend of mine and webmin was what > the webmaster enjoyed the most :) > > I find it easy to setup and once you cut off ¾ of the icons on the webmin > interface it starts to look good. > > I never trusted cpannel, things break here and there for no reason. I never trusted webmin, seeing how many exploits (even root exploits) were available for it. usermin was the last I saw a warning for. Cheers, Ralph -- Ralph Angenendt......ra(a)br-online.de | .."Text processing has made it possible Bayerischer Rundfunk...80300 München | ....to right-justify any idea, even one Programmbereich.Bayern 3, Jugend und | .which cannot be justified on any other Multimedia.........Tl:089.5900.16023 | ..........grounds." -- J. Finnegan, USC

1 0

LVM Input/output error
by itayf＠nospammail.net 11 Jul '06

11 Jul '06

Hi, I recently installed centos for the first time and I like it! Also, I just started working with lvm. The following warnings are genertated whenever I run one of lvm commands on the external usb disk (MyBook by Western Digital). * What could be the source for those messages? * Should I worry about them (writing into the created LV's seems to work)? * If yes, how to fix them? [root@frodo pilpel10]# uname -a Linux frodo 2.6.9-34.0.1.ELsmp #1 SMP Wed May 24 05:28:30 CDT 2006 x86_64 x86_64 x86_64 GNU/Linux Using lvm2 2.02.01-1.3 Thanks in advance, Itay <quote> [root@frodo pilpel10]# vgcreate VGe1 /dev/sdc2 /dev/dm-11: read failed after 0 of 4096 at 5242814464: Input/output error /dev/dm-11: read failed after 0 of 4096 at 0: Input/output error /dev/dm-12: read failed after 0 of 4096 at 54460416: Input/output error /dev/dm-12: read failed after 0 of 4096 at 0: Input/output error /dev/dm-13: read failed after 0 of 4096 at 216895782912: Input/output error /dev/dm-13: read failed after 0 of 4096 at 0: Input/output error /dev/dm-14: read failed after 0 of 4096 at 61203218432: Input/output error /dev/dm-14: read failed after 0 of 4096 at 0: Input/output error /dev/dm-11: read failed after 0 of 4096 at 5242814464: Input/output error /dev/dm-11: read failed after 0 of 4096 at 0: Input/output error /dev/dm-12: read failed after 0 of 4096 at 54460416: Input/output error /dev/dm-12: read failed after 0 of 4096 at 0: Input/output error /dev/dm-13: read failed after 0 of 4096 at 216895782912: Input/output error /dev/dm-13: read failed after 0 of 4096 at 0: Input/output error /dev/dm-14: read failed after 0 of 4096 at 61203218432: Input/output error /dev/dm-14: read failed after 0 of 4096 at 0: Input/output error Volume group "VGe1" successfully created [root@frodo pilpel10]# pvscan /dev/dm-11: read failed after 0 of 4096 at 5242814464: Input/output error /dev/dm-11: read failed after 0 of 4096 at 0: Input/output error /dev/dm-12: read failed after 0 of 4096 at 54460416: Input/output error /dev/dm-12: read failed after 0 of 4096 at 0: Input/output error /dev/dm-13: read failed after 0 of 4096 at 216895782912: Input/output error /dev/dm-13: read failed after 0 of 4096 at 0: Input/output error /dev/dm-14: read failed after 0 of 4096 at 61203218432: Input/output error /dev/dm-14: read failed after 0 of 4096 at 0: Input/output error PV /dev/sdc2 VG VGe1 lvm2 [296.13 GB / 296.13 GB free] PV /dev/sda2 VG VG00 lvm2 [232.78 GB / 1.78 GB free] Total: 2 [528.91 GB] / in use: 2 [528.91 GB] / in no VG: 0 [0 ] [root@frodo pilpel10]# lvcreate -L 202G -n LVbiogateBAK_home VGe1 /dev/dm-11: read failed after 0 of 4096 at 0: Input/output error /dev/dm-12: read failed after 0 of 4096 at 0: Input/output error /dev/dm-13: read failed after 0 of 4096 at 0: Input/output error /dev/dm-14: read failed after 0 of 4096 at 0: Input/output error Logical volume "LVbiogateBAK_home" created </quote>

6 20

yum dovecot fail
by Azil Adi Permana 11 Jul '06

11 Jul '06

Hello CentOS, anyone can help me? i'm trying to install dovecot on my CentOS [root@cumi ~]# yum install dovecot --noplugins Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments Nothing to do [root@cumi ~]# anyone has an idea? since i already search dovecot, and there is a dovecot package [root@cumi ~]# yum search dovecot Reading repository metadata in from local files dovecot.i386 0.99.11-2.EL4.1 base Matched from: dovecot Dovecot Secure imap server Dovecot is an IMAP server for Linux/UNIX-like systems, written with security primarily in mind. It also contains a small POP3 server. It supports mail in either of maildir or mbox formats. http://dovecot.procontrol.fi/ dovecot.i386 0.99.11-2.EL4.1 installed Matched from: dovecot Dovecot Secure imap server Dovecot is an IMAP server for Linux/UNIX-like systems, written with security primarily in mind. It also contains a small POP3 server. It supports mail in either of maildir or mbox formats. http://dovecot.procontrol.fi/ [root@cumi ~]# Thx -- http://tinyurl.com/gnu6v << GNU is NOT UNIX

4 4

FirewallBuilder
by pvargas＠nuca.ie.ufrj.br 11 Jul '06

11 Jul '06

Hi, I need some help about : I just install Centos 4.3 and I would like to install a FirewallBuilder software. 1. Where i can get FirewallBuilder .rpm for Centos 4.3 ? 2. I tried install fwbuilder-2.0.12.tar.gz and libfwbuilder-2.0.12.tar.gz like this : tar -xzvf libfwbuilder-2.0.12.tar.gz cd libfwbuilder-2.0.12 ./autogen.sh It's not work I receive a error : Found GNU Make at /usr/bin/gmake ... good. This script runs configure ... You did remember necessary arguments for configure, right? which: no aclocal in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin) you need autoconfig to generate the Makefile ./autogen.sh: line 25: libtoolize: command not found ./autogen.sh: line 27: acinclude: command not found ./autogen.sh: line 28: aclocal: command not found ./autogen.sh: line 29: autoconf: command not found checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c Creating VERSION.h file... checking looking for QT... /usr/lib/qt-3.3 checking for qmake... /usr/bin/qmake checking for gcc... no checking for cc... no checking for cc... no checking for cl... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. Any idea about this ? Thanks, Paulo Vargas ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/

3 2

One Cooperation invited from China
by looks 10 Jul '06

10 Jul '06

Dir Sirs/Madams, How do you do! Please allow me introduce myself. My name is Yang Wenqing, I am from POLY high-technology company. My company focuses on technology support service and software promotion application for Linux software. We have army background. I used to promote TurboLinux software in SI in 2000. After that, I worked in LessonMaster Software Company for promotion Red Hat Linux software. At that time, our teamwork charged in connecting with Red Hat Company, and made product into disks. Furthermore, we designed package and provide online support service for the product. From 7.x to last year, we produced many versions of Fedora Linux, and sold them into Chinese software stores through our distribution network. I am very proud that we are the earliest ones to distribute Red Hat Enterprise Linux. Our great team does excellent work for making it so popular among Chinese users. From last year on, Red Hat cancelled our agency qualification, but for what we have done for this product, no body can deny. Now my POLY high-technology company markets Linux software, and provide technology support service for Linux users who could not affordable but still use Linux software. We have customer including army, government, .COM, media companies like CCTV, and some production companies. Please let me introduce our promotion project briefly. Hope that will help you could understand us much. At first, we made Linux package product and let me easier to sale into Chinese market. As I mentioned, Red Hat Company didn’t not have its own company in China at that time. So we edited a serial number creation data system to let users identify their status. We also did 5X8 phone support service for Professional Red Hat Linux personal version, and some spot service for users came into our company for problem solution. We sold this product at 68RMB, which was a reasonable price for Chinese market. We made same price level for Fedora Linux series product. We sold Red Hat personal version more than 10,000 copies, even more than 100,000 copies. Though we can sale Fedora Linux more than 10,000 copies, we don’t think this product is very suitable for most population. We are afraid our users will give up use Fedora Linux because they would think this product itself has lots of problems. For that reason, we are looking for some replacement product. We think CentOS Linux is a very good product, we want to cooperate with your company to make popular in China. We have confidence that we could make profit from this cooperation, which is a win-win situation for both of us. We could transmit money from revenue to your company as some kind of donation. Meanwhile, we hope your company could entitle us to market Linux Software as general distributor in mainland China. As you know, our company has focused on Linux business for many years. We have excellent team and have already got great success for it. We have capability to market and promote it in Chinese market. Meanwhile, if there are many companies engage in same product, they will have price competition with each other. That will make companies could not survive after that. So, we hope your company could authorize us as a exclusive distributor to sale and market your product to share our resources and Chinese sales network. We are looking forward to cooperating with your company! We very appreciate to receive your response! Thanks. Looking forward to hearing from you soon. Best Regards. Wenqing -----------------------------------------------------------― Beijing PolyWin Technology Co., Ltd 杨文清 GM Address:27th Floor,Tower B,ChaoWaiMen Office Building,No.26 Chaowai Avenue,ChaoYang District,Beijing 100020,China Tel:(8610)8565 5555 ext.850 Fax:(8610)8565 5518 Mobile;13911561267 Email:yangwenqing@polytele.com looks(a)263.net Http://www.linuxsky.cn -----------------------------------------------------------―

3 2

Xen binaries RPM for CentOS 64bit
by Devraj Mukherjee 10 Jul '06

10 Jul '06

Hi Everyone, I asked this question on the XenSource list and not having recd. an answer thought I might check if anyone here has a solution. I am looking for prebuilt Xen binaries for CentOS 4.3 64 bit. Has anyone built this or knows where I can fetch a pre-built version? Thanks.

1 0

Wine 0:0.9.16 from Extras: update failure?
by William L. Maltby 10 Jul '06

10 Jul '06

Tried update on wine (7/9/2009, appx 20:15 EDT). Needed wine-core added to my includepkgs. Did and looked like it would go until this. --> Finished Dependency Resolution Error: Missing Dependency: /usr/bin/xmessage is needed by package wine-core [root@wlmlfs08 etc]# yum provides xmessage Loading "protectbase" plugin Loading "fastestmirror" plugin Searching Packages: <snip> ... X11 tools provides one in /usr/X11R6/bin/ [root@wlmlfs08 etc]# locate xmessage /usr/include/kde/kxmessages.h /usr/X11R6/bin/xmessage /usr/X11R6/man/man1/xmessage.1x.gz No joy in Mudville. Is this a case of me not having a needed package or ?? If not, who do I bugzilla? TIA -- Bill

2 2

Re: 3ware SATA RAID Card
by Jon 10 Jul '06

10 Jul '06

> Yeah, it runs a daemon that you can configure via web or via the > config file and you can configure it to let you know when the array is > degraded, > etc. Did you use the development tar ball (which 3ware recommend if running the 2.6 kernel) or the stable one? Thanks Jon ___________________________________________________________ Yahoo! Messenger - with free PC-PC calling and photo sharing. http://uk.messenger.yahoo.com

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss