- Discuss - lists.centos.org

Dovecot 1.0.something rpm for CentOS?
by Kai Schaetzl 06 Apr '06

06 Apr '06

Is anyone using successfully a specific rpm of Dovecot 1.0.something? There's nothing on dag and a few on rpmfind (for Fedora Core), but I don't know if they'd work. The one coming with Centos 4 (0.99.11) has quite a few bugs and I'd like to put an upgrade on top of it. Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

3 5

ADP94XX Driver
by Mahayudin Mohd Hashim 06 Apr '06

06 Apr '06

Trying to install on IBM eseries with Adaptec 9405 SAS. Fail to install / recognized SAS. Download from IBM RHE4 driver ... unfortunately did not help. Anybody have any idea? -- ----------- ( ) §( (.) (.) )§ ---o000o-(_)-o000o--- Mahayudin Mohd Hashim Kuantan Port Consortium Sdn Bhd Wisma KPC, KM 25 Tanjung Gelang PO Box 199 25720 Kuantan, PAHANG MALAYSIA Vox : +609.583.3205.271 http://www.kuantanport.com.my ------------------------------------------- |SEEK TO UNDERSTAND, THEN TO BE UNDERSTOOD| -------------------------------------------

1 0

Clarification Needed: DAG vs. rpmforge.
by William L. Maltby 06 Apr '06

06 Apr '06

Dag in the thread about kvirc, I had pointed to dries repo, based on a list of repos I use *now*, that replaced your repo with rpmforge. This based on an instruction earlier that I should use rpmforge instead. So when I run my "yum --enablerepo=\* list...", it did not show your repo contents. Should I be including *both* rpmforge and dag? TIA Bill

3 4

3ware 9550SX and CentOS
by Fong Vang 05 Apr '06

05 Apr '06

I'm getting a couple of systems that are arriving with the new 3ware 9550sx controller. Does anyone know when this will be natively supported by CentOS? Has anyone built an RPM of the driver/module for this new controller?

7 9

compat-gcc-32-c++-3.2.3-47.3 and 3.3.2 support
by J.J.Garcia 05 Apr '06

05 Apr '06

Hi all, 4.3/rh release is shipping compat-gcc-32-c++-3.2.3-47.3 which i can see includes 3.2.3 & 3.3.4 support but if i need support for 3.3.2 libstdc++ what should i do? I've searched for compat pkgs and no one has 3.3.3 support, im wondering if installing 3.3.2 gcc tools from gnu sources is a good idea or check if 3.3.2 rpm for this exists. Is that compat-* pkgs something related to RH only? TIA Jose

1 0

latest 4.2 to 4.3 upgrade and distribution by CentOS team
by Robert Hanson 05 Apr '06

05 Apr '06

greetings! it appeared to me that previous upgrades were strained by sheer amount and size of the update as well as the eagerness of the CentOS userbase to get upgraded... this last one, well... it went so smooth that i believe many may have missed it happening so to speak :-) initially having been a large Galacticom aka Worldgroup BBS operator (remember those?) and then an ISP for going on 2 decades i sincerely appreciate the smoothness of the last batch of upgrades and the distribution of such around the world... it appeared almost effortless from this side... :-) CentOS team, great job! and keep up the awesome work! ummm, do you have any statistics to share that show how much data was moved around and by how many internal servers and external clients? again, way to go! - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

3 2

irqbalance is dead, can not shutdown
by lnthai2002＠aim.com 05 Apr '06

05 Apr '06

After updating to centos 4.3, I notice a failure in terminating irqbalance whenever i shutdown the system. Checking the services after the system reboot i see the error in irqbalance: "irqbalance dead but subsys locked" Can anyone tell me what irqbalance is and if it safe to disable it ? Why i dont see it in centos 4.2? Thanks in advance. Thai -------------------------------------------------- Where there's will, there's a way ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

6 9

SELinux
by Chris Weisiger 05 Apr '06

05 Apr '06

Who would / Who wouldnt need to run SELinux? I have linux server at home. Would I need to run SELinux? What are the advantages of SELinux? What is the average home user doing?

8 9

Using long usernames with dots in LDAP
by Oliver Schulze L. 05 Apr '06

05 Apr '06

Hi, I have configured openldap on CentOS 4.3, all my users are in ldap. I also configure idx-smbtools for managing the users. The test I'm doing is creating long usernames like this: this.is.avery.long.username All is working fine: sendmail, dovecot, idx-smbldap-tools, ceti-poppassd, chown My question is, I'm breaking some standards? Or breaking some posix specification by doing this? It is recomended to have this kind of usernames on Linux? Many thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

3 5

Domino on CentOS
by Eduardo Grosclaude 05 Apr '06

05 Apr '06

Hello, Can someone give any advice on installing Lotus Domino 7 on Centos 4.2? Replacing /etc/redhat-release contents by Nahant signature does the trick? TIA -- Eduardo Grosclaude Universidad Nacional del Comahue Neuquen, Argentina

2 3

g++ missing
by Mark Richards 05 Apr '06

05 Apr '06

This is probably a basic, but I can't find any reference to it in the CentOS docs. It appears g++ is not installed (or was not provided) in the CentOS distribution 4.2. Should this be present or must it be installed manually? I'm attempting to build gnu bison, and get: source='calc++-scanner.cc' object='calc++-scanner.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../../build-aux/depcomp \ g++ -DHAVE_CONFIG_H -I. -I. -I../.. -c -o calc++-scanner.o calc++-scanner.cc ../../build-aux/depcomp: line 512: exec: g++: not found make[4]: *** [calc++-scanner.o] Error 127 make[4]: Leaving directory `/root/bison-2.1/examples/calc++' make[3]: *** [all] Error 2 make[3]: Leaving directory `/root/bison-2.1/examples/calc++' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/bison-2.1/examples' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/bison-2.1' make: *** [all] Error 2

3 2

Help I cant find where Java is installed.
by Chris Peikert 05 Apr '06

05 Apr '06

I installed Suns Java but I don't know how to find where it installed to. Can someone tell me how to find it? Someone told me to do a Find -name java -print But all I got was a message saying I had mail. When I looked in the mail it was a log with a bunch of jibberish. Any clue what to do now?

3 3

showing which process/kernerldaemon own udp ports?
by Christian Nygaard 05 Apr '06

05 Apr '06

How does one know which process/kerneldaemon that own specific udp ports? The UDP ports does not show up in # lsof -i udp # netstat -anp shows udp 0 0 0.0.0.0:911 0.0.0.0:* - How do you get to know what hooked UDP 911? Helpful hints would be greatly appreciated Chris

3 2

Backup options.
by Erin Fortenberry 05 Apr '06

05 Apr '06

I am a long time FreeBSD user and have been using dump/restore for many years for disk to disk backups. Now I am getting more and more into FC4 and CentOS, but am I stuck on only using tar/star for backups? Tar in its various forms are fine for some items, like home directories, but dump and restore in FreeBSD also gave me the possibility of easily doing a bare metal restore. What are my options for command line only backups? What is everyone else using? I do know about Bacula and Amanda... I don't know, maybe I have been using FreeBSD for too long. Thanks, Erin

15 17

samba client
by Zbynek Dohnal 05 Apr '06

05 Apr '06

Hi, I installed absolutely new installation of CentOS 4.3 from DVD media and I unchecked every additional packages. After that I perform # yum upgrade and install wanted packages # yum install samba-client installed packages are samba-common-3.0.10-1.4E.6 samba-client-3.0.10-1.4E.6 SELinux and iptables are disabled. But if I can try to mount my server public share #mount -t smbfs -o username=nobody //samba/public /mnt/pub CentOS complains as is listed in /var/log/messages Apr 5 13:25:36 pc1-002 kernel: smb_retry: no connection process and I have to cancel this operation by CTRL-C Apr 5 13:26:04 pc1-002 kernel: smb_delete_inode: could not close inode 2 Have anybody some sugesstion? -- Zbynek Dohnal sysadmin SSI Schafer s.r.o. Tovarni 325 753 01 Hranice tel. +420 581 820 216 fax. +420 581 820 299 email zbynek.dohnal(a)ssi-schaefer.cz gpg www.gpg.cz

1 0

CentOS-announce Digest, Vol 14, Issue 1
by centos-announce-request＠centos.org 05 Apr '06

05 Apr '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0271 Important CentOS 3 i386 freeradius - security update (Tru Huynh) 2. CESA-2006:0271 Important CentOS 3 x86_64 freeradius - security update (Tru Huynh) 3. CESA-2006:0272 Moderate CentOS 3 i386 openmotif - security update (Tru Huynh) 4. CESA-2006:0272 Moderate CentOS 3 x86_64 openmotif - security update (Tru Huynh) 5. CESA-2006:0271 Important CentOS 4 x86_64 freeradius - security update (Johnny Hughes) 6. CESA-2006:0271 Important CentOS 4 i386 freeradius - security update (Johnny Hughes) 7. CESA-2006:0272 Moderate CentOS 4 x64_64 openmotif - security update (Johnny Hughes) 8. CESA-2006:0272 Moderate CentOS 4 i386 openmotif - security update (Johnny Hughes) 9. CESA-2006:0271 Important CentOS 4 ia64 freeradious - security update (Pasi Pirhonen) 10. CESA-2006:0272 Moderate CentOS 4 ia64 openmotif - security update (Pasi Pirhonen) 11. CESA-2006:0271 Important CentOS 4 s390(x) freeradious - security update (Pasi Pirhonen) 12. CESA-2006:0272 Moderate CentOS 4 s390(x) openmotif - security update (Pasi Pirhonen) 13. CESA-2006:0271 Important CentOS 4 axp freeradius - security update (Pasi Pirhonen) 14. CESA-2006:0272 Moderate CentOS 4 axp openmotif - security update (Pasi Pirhonen) 15. CESA-2006:0271 Important CentOS 3 ia64 freeradius - security update (Pasi Pirhonen) 16. CESA-2006:0272 Moderate CentOS 3 ia64 openmotif - security update (Pasi Pirhonen) 17. CESA-2006:0271 Important CentOS 3 s390(x) freeradius - security update (Pasi Pirhonen) 18. CESA-2006:0272 Moderate CentOS 3 s390(x) openmotif - security update (Pasi Pirhonen) 19. CESA-2006:0272-01: Moderate CentOS 2 i386 openmotif security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Tue, 4 Apr 2006 14:43:31 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2006:0271 Important CentOS 3 i386 freeradius - security update To: centos-announce(a)centos.org Message-ID: <20060404124331.GA12053(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2006:0271 freeradius security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2006-0271.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/freeradius-1.0.1-2.RHEL3.2.i386.rpm addons/i386/RPMS/freeradius-mysql-1.0.1-2.RHEL3.2.i386.rpm addons/i386/RPMS/freeradius-postgresql-1.0.1-2.RHEL3.2.i386.rpm addons/i386/RPMS/freeradius-unixODBC-1.0.1-2.RHEL3.2.i386.rpm source: updates/SRPMS/freeradius-1.0.1-2.RHEL3.2.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update freeradius\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

install CentOS using an external USB cdrom
by Ian Brown 04 Apr '06

04 Apr '06

Hello, I have an external USB cdrom ; I have a machine which does not have a VGA card and not a standard IDE socket so you cannot connect a CDROM internally to it ; it has USB port; I want to install CentOS using an external USB cdrom on this machine, through the serial port. Is there a way to do it ? I am quite desperate about it. The motherboard DOES enable configuing the BIOS to boot from a USB device. Regards, IB

7 13

php on command line problems
by Kai Schaetzl 04 Apr '06

04 Apr '06

The installed php on CentOS/RHEL is the CGI version. This means I should be able to get command line arguments with $GLOBALS['argv'] or $_SERVER['argv']. That's how the php documentation tells and how it works f.i. on Suse. However, on CentOS I get them only when I use the -n switch to php (no php.ini). The problem with -n is that php cannot find the mysql_connect function for some unknown reason. So, how can I get to argv without using -n? Or can I add the cli version with an additional rpm? I search with yum for php-cli and cli-php, but didn't find such a package. Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

4 6

OT: SME Server7.0rc1 help request
by Raghavendra Moktali 04 Apr '06

04 Apr '06

Hi, sorry for the post here. I was hoping if someone has seen an error as described below. google did not give much links. System: PIII,450Mhz, Intel board SR440BX, 320MB ram, Segate 7200 rpm 80g gb disk. cdrom: cdrw-samsung52X/teac32x Bug report: http://www.contribs.org/bugzilla/show_bug.cgi?id=1187 SME server Version: 7.0rc1 iso. image verifies md5 on windows xp system. Problem: monitor displays the following and freezes. loading vmlinuz......... loading initrd.img............. Ready. What's wrong here? I am not able to get to the media check. FC5, WinXP boot and install. So i am thinking no hardware fault. Changing CD drive does not help. previous versions: Centos 4.2 server CD installs and is fine. I only wanted a UI as i am not very familar to the command line(read newbie). I had loaded sme server 6.0 on this system successfully. I will be grateful if someone can point me in the right direction. As this is OT, an off list reply also is ok with me. TIA, Raghavendra Moktali

2 1

CentOS 4.3 i586 install option
by Gerald Waugh 04 Apr '06

04 Apr '06

Johnny Hughes wrote in thread RE: [CentOS] install CentOS using an external USB cdrom Changing Subject to CentOS 4.3 i586 install option Last few post on the thread "install CentOS using an external USB cdrom" should have been "serial console install" or similar > instead of > linux your_options_here > use > i586 your_options_here > (that is w/ the 4.3 version of CentOS ... with versions of > CentOS-4 before 4.3 ... and with CentOS-3 ... nothing special > is required to install on i586) Johnny, Thanks for the info. We do an install from a single custom CD. Would I add the i586 option to isolinux/isolinux.cfg in an append statement??? Maybe something like; append i586 ks=cdrom:/ks/custom-config-file <and> <so> <forth> Gerald

2 1

Ssoundblaster audigy and alsamixer
by Lorin B Pino 04 Apr '06

04 Apr '06

I have an interesting problem. I have no sound through the sound card, but I can use the onboard sound ok. The reason I have no sound is that the slider for "audigy analog/digital output jack" is missing in the gnome mixer. The label is there, and a mute box are there, but no sliders. When I bring up alsa mixer in the console, there is a box for a slider, but no slider. According to soundcard detection, the module "snd-emu10k1" is installed. If I switch the speakers to the headphone jack, I can get some sound, although it is with a lot of static. This is a dual boot machine with suse 9.2, so I know the card works. Any ideas? ~Lorin

1 0

Slow clock
by Gary Hodder 04 Apr '06

04 Apr '06

Hi all, is there a fix for the clock running slow on Centos 4.3, it looks to be running at about 25 to 30% of its normal speed. Thanks Gary.

2 2

newbie kernel question
by Nick Smith 04 Apr '06

04 Apr '06

Im sorry if this is a newb question, but how do you recompile the kernel in CentOS 4.3? I need to add reiserfs support (even though the setup detected it) the kernel it gave me didnt have support for reiserfs, and my entire fileserver is all reiserfs. I tried the gentoo way, which im use to and it bombed. What do i need to do? does it install kernel source by default? I couldnt find any good documentation on the subject, and this is my first RH type install. thanks Nick

14 47

CentOS 4.3 occasionally locking up accessing IDE drive
by Bart Schaefer 04 Apr '06

04 Apr '06

For those who haven't seen my several previous postings about problems with this (now not quite so) new PC, I have an ASUS P5N32-SLI Deluxe motherboard. The boot drive and primary filesystems are on an SATA disk and I'm having no problem with that. However, I recently plugged in a couple of IDE drives salvaged from my old PCs and I'm running into trouble with one of those. The drive in question is a 20GB Maxtor 92049U6. It had an old RH5.2 ext2 filesystem on it when I first plugged it in, from which I tried to recover some data to back up to CD. Mostly this worked, but I started encountering read errors accessing some files so I unmounted the partition and started a fsck on it. At some point during the fsck (I was off doing something else on another workspace at the time), the system locked up hard, leaving the disk activity LED lit. I had to reset the PC. So at that point I booted single-user and ran the fsck from there. It completed successfully after fixing a number of problems. I continued into multi-user mode, finished doing my backups, repartitioned the drive, and started "mkfs -t ext3 -c" on the larger partition, to check for bad blocks. Again at some point part way through the mkfs, the system locked up. Back to single user mode, run the "mkfs", everything finishes fine. Back to multi-user mode, start to copy some large files onto the drive. MD5 sums fail to match for some of the copied files. Unmounted and started up "fsck -y". This succeeded, after fixing a number of errors, so (at this point just as a test case) I re-copied the files with bad MD5s. Some of these came through OK this time, others still did not. I decided perhaps this meant there were still bad blocks on the drive that a read-only test was not finding. You'd think I'd have learned, but encouraged by the success of the previous fsck I optimistically started up another "fsck -c -c -y" on the suspect partition, and this time I waited around to watch it. About 1.6GB into the 16GB partition, the system locked up again. This time I booted into a hard disk diagnostic program instead of into CentOS. After running overnight last night, a non-destructive read-write surface-scan reported no problems with the drive. This leads me to suspect that the problem is with linux, but I don't know how to proceed with diagnosing it. Suggestions would be appreciated.

5 11

yum update error
by Sungsoo Kim 04 Apr '06

04 Apr '06

I wanted to update to CentOS 4.3 from CentOS 4.2. While updating packages using yum, there was serveral error messages, and I've found that some packages has not been updated. So I tried to update again but the packages would not be updated. I attached the messages shown below. Sungsoo Kim ------------------------------------------- [root@phobos ~]# yum update Setting up Update Process Setting up repositories update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package kernel.x86_64 0:2.6.9-34.EL set to be installed ---> Package initscripts.x86_64 0:7.93.24.EL-1.1.centos4 set to be updated ---> Package nscd.x86_64 0:2.3.4-2.19 set to be updated ---> Package squid.x86_64 7:2.5.STABLE6-3.4E.12 set to be updated ---> Package diskdumputils.x86_64 0:1.2.8-2 set to be updated ---> Package hal.x86_64 0:0.4.2-3.EL4 set to be updated ---> Package kernel-smp.x86_64 0:2.6.9-34.EL set to be installed --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: kernel x86_64 2.6.9-34.EL base 11 M kernel-smp x86_64 2.6.9-34.EL base 10 M Updating: diskdumputils x86_64 1.2.8-2 base 56 k hal x86_64 0.4.2-3.EL4 base 168 k initscripts x86_64 7.93.24.EL-1.1.centos4 base 1.2 M nscd x86_64 2.3.4-2.19 base 130 k squid x86_64 7:2.5.STABLE6-3.4E.12 base 1.2 M Transaction Summary ============================================================================= Install 2 Package(s) Update 5 Package(s) Remove 0 Package(s) Total download size: 24 M Is this ok [y/N]: y Downloading Packages: Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction error: %pre(hal-0.4.2-3.EL4.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping hal-0.4.2-3.EL4 error: %pre(diskdumputils-1.2.8-2.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping diskdumputils-1.2.8-2 error: %pre(squid-2.5.STABLE6-3.4E.12.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping squid-2.5.STABLE6-3.4E.12 error: %pre(nscd-2.3.4-2.19.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping nscd-2.3.4-2.19 error: %pre(initscripts-7.93.24.EL-1.1.centos4.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping initscripts-7.93.24.EL-1.1.centos4 error: %pre(kernel-smp-2.6.9-34.EL.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping kernel-smp-2.6.9-34.EL error: %pre(kernel-2.6.9-34.EL.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping kernel-2.6.9-34.EL error: %preun(initscripts-7.93.20.EL-1.x86_64) scriptlet failed, exit status 255 error: %preun(nscd-2.3.4-2.13.x86_64) scriptlet failed, exit status 255 error: %preun(squid-2.5.STABLE6-3.4E.11.x86_64) scriptlet failed, exit status 255 error: %preun(diskdumputils-1.1.9-4.x86_64) scriptlet failed, exit status 255 error: %preun(hal-0.4.2-1.EL4.x86_64) scriptlet failed, exit status 255 Installed: kernel.x86_64 0:2.6.9-34.EL kernel-smp.x86_64 0:2.6.9-34.EL Updated: diskdumputils.x86_64 0:1.2.8-2 hal.x86_64 0:0.4.2-3.EL4 initscripts.x86_64 0:7.93.24.EL-1.1.centos4 nscd.x86_64 0:2.3.4-2.19 squid.x86_64 7:2.5.STABLE6-3.4E.12 Complete!

3 3

Delay in SSH login..
by siva m 04 Apr '06

04 Apr '06

Hi, I have CentOS 4.3 running on my AMD Athlon XP(32 bit) PC and Windows 2000 running on my other Intel P3 PC(These 2 PCs are connected using a network switch). Basically I use the one running Linux as back end server and everything was fine so far. But recently I am experiencing some delay in loggin in to CentOS through SSH. The Putty client which I use generally opens up asking for username prompt(no delay in that) but after entering the password it takes atleast 10-15 seconds gap before I logged in. It was fine before and I am sure I didn't made any changes to linux configuration. Can anyone please help me with this issue. By the way I always use the IP address like($ ssh user(a)192.168.0.xxx without any hostname) thanks Lin

2 4

Vmware server on centos x86_64server
by Les Mikesell 03 Apr '06

03 Apr '06

I had this working once but had to re-use the machine and didn't keep track of what it took. Does anyone have a list of the extra packages needed to run vmware server on a machine with the single-disk x86_64 server install + updates. glibc.i686 installed ok, but xorg-x11-libs.i386 has a conflict with fontconfig that I don't recall from the previous time. Could that have changed with the 4.3 updates? -- Les Mikesell lesmikesell(a)gmail.com

2 1

Webcam Recommendation required
by Sanjay Arora 03 Apr '06

03 Apr '06

Hello all Request please recommend a webcam that works well with Centos 4.2 I use DAG repo to update the desktop multimedia packages. With best regards Sanjay

6 9

Anaconda Exeption
by Henry Rodriguez 03 Apr '06

03 Apr '06

I'm intalling CentOS Sparc and after i choose the packages i want to install i get the below exeption: Traceback (most recent call last): File "/usr/bin/anaconda", line 1176 in intf.run (id, dispatch, configFileData) File "/local/builder/tmp/anaconda-10.1.1.25 //usr /lib/anaconda/text.py", line 510, in run Then the installation aborts. WHAT CAN I DO TO SOLVE THE EXCEPTION?? Thanks... --------------------------------- New Yahoo! Messenger with Voice. Call regular phones from your PC for low, low rates.

3 3

Cannot compile metamail
by Fajar Priyanto 03 Apr '06

03 Apr '06

Hello all, I've been trying to compile metamail on Centos4.2. But no luck so far. rpmbuild --rebuild metamail-2.7-30AS.src.rpm Installing metamail-2.7-30AS.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.96604 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf mm2.7 + /bin/gzip -dc /usr/src/redhat/SOURCES/mm2.7.tar.Z + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd mm2.7 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (mm-2.7-make.patch):' Patch #0 (mm-2.7-make.patch): + patch -p1 -b --suffix .make -s + echo 'Patch #1 (mm-2.7-fonts.patch):' Patch #1 (mm-2.7-fonts.patch): + patch -p1 -b --suffix .font -s + echo 'Patch #2 (mm-2.7-glibc.patch):' Patch #2 (mm-2.7-glibc.patch): + patch -p1 -b --suffix .glibc -s + echo 'Patch #3 (mm-2.7-csh.patch):' Patch #3 (mm-2.7-csh.patch): + patch -p1 -b --suffix .csh -s + echo 'Patch #4 (mm-2.7-uudecode.patch):' Patch #4 (mm-2.7-uudecode.patch): + patch -p1 -b --suffix .tmpfiles -s + echo 'Patch #5 (mm-2.7-sunquote.patch):' Patch #5 (mm-2.7-sunquote.patch): + patch -p1 -b --suffix .quote -s + echo 'Patch #7 (mm-2.7-ohnonotagain.patch):' Patch #7 (mm-2.7-ohnonotagain.patch): + patch -p1 -b --suffix .sigh -s + echo 'Patch #8 (mm-2.7-arghhh.patch):' Patch #8 (mm-2.7-arghhh.patch): + patch -p1 -b --suffix .arghhh -s + echo 'Patch #9 (mm-2.7-sml.patch):' Patch #9 (mm-2.7-sml.patch): + patch -p1 -b --suffix .sml -s + echo 'Patch #10 (metamail-2.7-nl.patch):' Patch #10 (metamail-2.7-nl.patch): + patch -p1 -s + echo 'Patch #11 (mm-2.7-linux.patch):' Patch #11 (mm-2.7-linux.patch): + patch -p1 -b --suffix .linux -s + echo 'Patch #12 (metamail-2.7-fixpartial.patch):' Patch #12 (metamail-2.7-fixpartial.patch): + patch -p1 -b --suffix .fixpartial -s + echo 'Patch #13 (metamail-2.7-fixawk.patch):' Patch #13 (metamail-2.7-fixawk.patch): + patch -p1 -b --suffix .fixawk -s + echo 'Patch #14 (metamail-2.7-usesox.patch):' Patch #14 (metamail-2.7-usesox.patch): + patch -p1 -b --suffix .usesox -s + pushd src/metamail /usr/src/redhat/BUILD/mm2.7/src/metamail /usr/src/redhat/BUILD/mm2.7 + echo 'Patch #15 (metamail-2.7-ulf.patch):' Patch #15 (metamail-2.7-ulf.patch): + patch -p0 -b --suffix .ulf -s + popd /usr/src/redhat/BUILD/mm2.7 + echo 'Patch #16 (metamail-2.7-boundary_crash.patch):' Patch #16 (metamail-2.7-boundary_crash.patch): + patch -p1 -b --suffix .boundary_crash -s + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.96604 + umask 022 + cd /usr/src/redhat/BUILD + cd mm2.7 + LANG=C + export LANG + unset DISPLAY + cd src + make 'RPM_OPT_FLAGS=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4' basics (cd metamail ; make CONFIGDIR=../. CFLAGS="-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -I. -DLINUX " CC="cc" LDLIBS="") make[1]: Entering directory `/usr/src/redhat/BUILD/mm2.7/src/metamail' rm -f metamail.o cc -c -I../. -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -I. -DLINUX metamail.c metamail.c:105: warning: conflicting types for built-in function 'malloc' rm -f codes.o cc -c -I../. -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -I. -DLINUX codes.c rm -f uue.o cc -c -I../. -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -I. -DLINUX uue.c rm -f shared.o cc -c -I../. -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -I. -DLINUX shared.c shared.c:14: error: conflicting types for 'malloc' shared.c:14: error: conflicting types for 'malloc' make[1]: *** [shared.o] Error 1 make[1]: Leaving directory `/usr/src/redhat/BUILD/mm2.7/src/metamail' make: *** [basics] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.96604 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.96604 (%build) Can someone give me some hints on what's going wrong? Thank you, -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 18:42:53 up 6:31, 2.6.15-1.1830_FC4 GNU/Linux Let's use OpenOffice. http://www.openoffice.org

2 2

Supermicro Superserver
by Jon 03 Apr '06

03 Apr '06

hi, Anyone using centos 3.6 or any 3 version on a supermicro superserver running in a scsi raid configuration. I'm having trouble running the adapatec software for a 2015s card. thanks Jon ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com

1 0

Ethernet bandwith problem ...
by "Petr \"Qaxi\" Klíma" 03 Apr '06

03 Apr '06

Hello I experienced strange problem with bandwith. My CentOS 4.3 x86_64 server is a gateway to Internet. The uplink is 20 Mbps full duplex Eth card is part of NForce4 chipset, the module is "forcedeth" As a testing tool we use "iperf" http://dast.nlanr.net/Projects/Iperf/ By test we decide downloda is only 10 Mbps (upload is 18-20 Mbps) The first suspect was ISP, so we did test in cooperation. ISP Our site FreeBSD ========= FreeBSD (ISP test machine) TCP&UDP down 20 Mbps TCP&UDP up 20 Mbps TCP&UDP up 20 Mbps TCP&UDP down 20 Mbps result: link is Ok The second and final suspect was our gateway: ISP Our site FreeBSD ========= CentOS 4.3 UDP down 20 Mbps UDP up 20 Mbps UDP up 20 Mbps UDP down 20 Mbps BUT TCP down 20 Mbps TCP up 20 Mbps TCP up 10-12 Mbps TCP down 10-12 Mbps SO: there is an problem with TCP ??? At the time of testing there was NO iptable rules or shaping enabled ... Where to find? I realy do not know. Petr Klíma e-mail: qaxi(a)seznam.cz

2 2

yum history
by Dogsbody 03 Apr '06

03 Apr '06

Hi, Is there a way to get a history of which packages were installed/updated when?? I have been googling and trying all sorts or yum and rpm commands and found nothing :-\ Thank you in advance. Regards, Dan

5 5

raid setup
by Mark Quitoriano 03 Apr '06

03 Apr '06

Hi, I have 2 identical xSeries 346 with 2 identical IBM 72GB scsi drive. What i did is install the centos 4.2 serverCD on the first IBM and set the HDD to raid1 and raid0 for swap. Now what i did is get the 2nd HDD in the 1st Server swap it with the 1st HDD in the 2nd Server and rebuild the Raids. The 1st server rebuild the array fine. My problem is the Second server, after rebuilding it and rebooted it, i need to rebuild the 2nd HDD again in the 2nd Server i don't know what went wrong. Here's my dmesg in my 1st server specific in md: md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: sdb3 has different UUID to sdb7 md: sdb2 has different UUID to sdb7 md: sdb1 has different UUID to sdb7 md: adding sda7 ... md: sda6 has different UUID to sdb7 md: sda5 has different UUID to sdb7 md: sda3 has different UUID to sdb7 md: sda2 has different UUID to sdb7 md: sda1 has different UUID to sdb7 md: created md5 md: bind<sda7> md: bind<sdb7> md: running: <sdb7><sda7> raid1: raid set md5 active with 2 out of 2 mirrors md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 --snip-- Here's my dmesg in my 2nd server specific in md: md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... md: considering sda7 ... md: adding sda7 ... md: sda6 has different UUID to sda7 md: sda5 has different UUID to sda7 md: sda3 has different UUID to sda7 md: sda2 has different UUID to sda7 md: sda1 has different UUID to sda7 md: created md5 md: bind<sda7> md: running: <sda7> raid1: raid set md5 active with 1 out of 2 mirrors md: considering sda6 ... md: adding sda6 ... md: sda5 has different UUID to sda6 md: sda3 has different UUID to sda6 md: sda2 has different UUID to sda6 md: sda1 has different UUID to sda6 md: created md2 md: bind<sda6> md: running: <sda6> raid1: raid set md2 active with 1 out of 2 mirrors md: considering sda5 ... md: adding sda5 ... md: sda3 has different UUID to sda5 md: sda2 has different UUID to sda5 md: sda1 has different UUID to sda5 md: created md1 md: bind<sda5> md: running: <sda5> md: personality 2 is not loaded! md :do_md_run() returned -22 md: md1 stopped. md: unbind<sda5> md: export_rdev(sda5) md: considering sda3 ... --snip-- -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

2 2

64 bit
by Robert Spangler 03 Apr '06

03 Apr '06

Hello, Presently I am considering using CentOS as my base OS. I am wondering about a few things though. I like KVirc as my irc program. I have had issue with compiling it in 64bit mode under Fedora 3 and was todl it was because Fedora installs both 32 and 64 bit libs and the compiler didn't understnad which to use. Will this be an issue with CentOS 4 also? If I install the 64 bit version how much trouble am I going to have when runnig 32 bit programs? -- Regards Robert Smile... it increases your face value!

5 4

Re: [CentOS] newbie kernel question (fwd)
by Maciej Żenczykowski 02 Apr '06

02 Apr '06

> ps. You still didn't answer my question about how not > compiling ext2 into the kernel brakes everything. > Don't worry, it was a rhethorical question. It's not rhetorical - it might not break it, it might break it... The point is: it's not tested by RH, it's not tested by CentOS, it probably (okay 99.99% here) works in a vanilla kernel - but does it work after all of RH's patches have been applied? It probably does, _BUT_ do we guarantee it? NO. It just might break, and if it does _YOU_ get to keep the pieces and don't say we didn't warn you (and the breakage may very well be silent and result in a corrupted disk (etc.) three months from now). Sure, ext2 seems like something that shouldn't break, but one would think the same of many other options - some of which DO break, and perhaps even silently at that (or at least silently until your system crashes and you lose your data). Cheers, MaZe.

2 1

vsftpd: transfer of files fails
by Kai Schaetzl 02 Apr '06

02 Apr '06

I've got a problem with vsftpd on a new CentOS system. Most users can login and list and everything but when they want to transfer files the client says "transfer failed" or so. However, it works fine with two users. Of course, these two have been created by me and used only by me. So, I didn't detect the problem before other users tried to upload. I tried with the command line ftp client and get this: ftp> put medlingua_beta.sql local: medlingua_beta.sql remote: medlingua_beta.sql 229 Entering Extended Passive Mode (|||59620|) 150 Ok to send data. 0% | | 0 0.00 KB/s --:-- ETAftp: netout: Connection reset by peer 0% | | -1 0.00 KB/s --:-- ETA 451 Failure writing to local file. vsftpd logs "FAIL UPLOAD:" for this, nothing else. Of course, first thought is there might be some permission problem. However, I checked everything and the directory permissions are identical with the two accounts that work. Same goes for the user details they have. They only difference is that one of the two accounts is uid 50x while all the others are over 10000 - including the second one that works. All users have login shell /bin/false, are in /home and are chrooted to their homedir. The same users with the same directory setup, permissions and everything work fine on the old machine with vsftpd 1.1 (CentOS has 2.0). The vsftpd configuration is basically how it is when installed from base plus a few additional settings (like write-enable=yes etc.). SELINUX is in permissive mode and there are no advanced ACLs in effect. The baffling thing is that it works for these two (and maybe other users I haven't identified yet), but not for the majority, although all seem to be setup equivalent. One other thing I just notice is that I can delete root-owned files (standard 644 permissions) with any of the FTP users (the working and the non-working ones) which should not be possible at all. Any hints? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 3

dbmmanage file in CentOS apache2 packages?
by Kai Schaetzl 02 Apr '06

02 Apr '06

I'm missing this file on my CentOS 4 installations with apache. Is there an additional package I need to install? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 2

ipsec - vpn client - CentOS4.3
by Tom Brown 02 Apr '06

02 Apr '06

Anyone know of a client that will allow me to connect a laptop running 4.3 to a checkpoint firewall running an ipsec tunnel? Once i have this working i can say farewell to windows. thanks

1 0

RE: [CentOS] Network issue
by Denis Croombs 02 Apr '06

02 Apr '06

>> I have a Centos 3.x server install that has been working for months >> now but is now going the error "resource temparary unavailable" any >> idea what normally causes this error ? >could you be a tad more specific as to where you're getting that error and under what conditions. Thanks for the reply. The error is displayed anytime you try an use the network, IE ping to default router from the command prompt. I now longer have access as it is the USA and I am in the UK, the networking is no longer woring from the system, I have asked the local person to change the network card, but that still gives the same error. Weh you go an IFCONFIG no errors are reported and the link light is on all the time, and the activity light does flash. Denis

2 1

Script to kill dictionary spam attacks
by Chris Mason (Lists) 02 Apr '06

02 Apr '06

Does anyone have a script that will notice a Rumplestiltskin type spam attack (where they try every name possible) and drop the sending into a block list? -- Chris Mason NetConcepts (264) 497-5670 Fax: (264) 497-8463 Int: (305) 704-7249 Fax: (815)301-9759 UK 44.207.183.0271 Cell: 264-235-5670 Yahoo IM: netconcepts_anguilla(a)yahoo.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

5 9

Network issue
by Denis Croombs 02 Apr '06

02 Apr '06

I have a Centos 3.x server install that has been working for months now but is now going the error "resource temparary unavailable" any idea what normally causes this error ? Thanks Denis

1 0

Request: Correct procedure on how to build a custom kernel on Centos
by Bogdan Nicolescu 02 Apr '06

02 Apr '06

This topic seems to be a perennial question. So I don't ruffle any feathers like in http://lists.centos.org/pipermail/centos-devel/2006-February/001400.html could someone point once and for all to an authoritative guide on a complete/proper/correct procedure on building and installing a custom kernel using the rpmbuild method rather than the traditional method. T.I.A.

3 3

cannot install centos, but fedora works
by Robin Mordasiewicz 02 Apr '06

02 Apr '06

I am able to install fedora core onto an old p700 box with SCSI RAID 1 array, but while trying to install CEntOS I get an error about the installer not being able to find the disks. Moving on. --

2 2

Web Interface Collapse?
by Mike Stankovic 02 Apr '06

02 Apr '06

Unless its an April Fools joke, the web interface shows the source code rather than the messages. An oversight or a compromise? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 6

List posting etiquette
by Collins Richey 02 Apr '06

02 Apr '06

Just a tag-on for the thread about list posting etiquette, etc., etc. The following is a link to an excellent (if wordy) how-to-do-it-right instruction manaual replete with links to other treatises on the topic. The entire text of this document is emailed to the mailing list on the 1st of each month. This is the Cadillac of etiquette manuals. http://www.linux-sxs.org/index2.html Enjoy, -- Collins Richey If you fill your heart with regrets of yesterday and the worries of tomorrow, you have no today to be thankful for.

3 2

yum install x windows?
by Tom Brown 01 Apr '06

01 Apr '06

Hi On a laptop that currently has 4.3 but no X is it possible to do a yum install x windows ? Or similar command to get X and Audio installed? thanks

3 4

SSH + VNC
by Ryan 01 Apr '06

01 Apr '06

I am trying to log into a desktop that is running CentOS 4.2 by tennelling VNC through SSH.. The desktop auto-logins a user, then sits there waiting for me to login. On the client side, I fire up SSH tunneling ssh -L 8000:127.0.0.1:5900 The client spits back the error vncviewer: ConnectToTcpAddr: connect: Connection refused Unable to connect to VNC server The server says channel 5: open failed: connect failed: Connection refused channel 5: open failed: connect failed: Connection refused I've tried ssh -L 5900:127.0.0.1:5900 ssh -L 8000:localhost:5900 and neither work. I've also tried using the command vino-preferences on the remote desktop. It tells me to connect to vnc:/IP-address:0 Whats interesting is that if I issue the command vncserver on the remote desktop, it starts up a new server on display :1. I can connect to this display with no issues via the SSH tunnel. Does anyone know how I can fix this problem? I use SSH tunneling and VNC with display :0 on SUSE 10.0 machines all the time without issues. thanks

5 6

libxml2 RPM via yum?
by Mark Sargent 01 Apr '06

01 Apr '06

Hi All, I can't find anything via yum for libxml2. I also, for some reason, can't get to the source page for libxml2 here, http://xmlsoft.org/sources/libxml2/ Is there not an RPM via yum for this? Need it for a dependency for installing PHP from source, which I need to do, for certain reasons. Cheers. Mark.

3 4

network monitoring systems
by Ryan 01 Apr '06

01 Apr '06

Does anyone have any recommendations for network monitoring systems that work with CentOS 3 or 4? thanks

8 11

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss