- Discuss - lists.centos.org

cups sharing ipp
by boricua＠despiertapr.com 22 Mar '06

22 Mar '06

have a strange isue. [ this is my 2nd day with centos4] nice instalatin BTW ok, i activated cupsd sharing and open the port 631 in the security level when i lpq from withing a network interface i get thi error ~$ lpq lpq: error - no default destination available. and in centos the log shows D [19/Mar/2006:08:37:17 -0500] AcceptClient: 8 from 192.168.1.100:631. D [19/Mar/2006:08:37:17 -0500] ReadClient: 8 POST / HTTP/1.1 D [19/Mar/2006:08:37:17 -0500] SendError: 8 code=403 (Forbidden) D [19/Mar/2006:08:37:17 -0500] CloseClient: 8 D [19/Mar/2006:08:37:17 -0500] CloseClient: 6 i search the archieves and found similar issues but not real response i tried several things in the config file but no avail anyone can shed any light why this would be i am able to print from centos.... its from other pc's in the network that i am not able repeat i open port 631:tcp i also tried udp and in cups config i specified to share the printer TIA

3 7

lphdisk and kickstart partitioning - laptop install
by Robert Moskowitz 21 Mar '06

21 Mar '06

So I want the suspend to disk option. I have found lphdisk http://www.procyon.com/~pda/lphdisk/ It says to create a primary partition of type a0 How do I do this in kickstart? Will it let me do a type? part /??? --fstype a0 --size 1058 size is 1024 + 32 + 2 What do I put in for the mount point? Where do I go for help? I have exhausted google...

4 9

notebook build try 1 tonight
by Robert Moskowitz 21 Mar '06

21 Mar '06

Well, I am not going to the IETF social tonight (even though it is the 20 anniversary party at a dude ranch outside of Dallas, and I have been here for 13 of those years). So it is the perfect time to shoot trying to do the build. We shall see.... So I will try and setup the suspend partition and then not format it. And see what I can load. Then check out the system. If it takes me a few tries, that's ok. It is supprising how hard it is to get information of putting Linux on notebooks....

2 2

is apt/synaptic OK?
by D. Ivago 21 Mar '06

21 Mar '06

Hi, because I'm used to apt based distro's like Debian and I also use it with Fedora, I wondered if I could use apt/synaptic on Centos 4.2 and if somebody could post his sources.list for the repo's that are availabel through apt. thanks! Ivago

3 4

HP DL140G2 and SATA woes
by Ray Van Dolson 21 Mar '06

21 Mar '06

Posted a similar version of this to the RHEL4 list... I'm having trouble getting CentOS 4.2 installed on a DL140G2 with two SATA drives. I am doing a PXE install, so I do not have a CD-ROM drive in the system and this appears to have the side-effect that both SATA drives are caught by the Uniform Multi-Platform E-IDE driver before ata_piix can catch it. As soon as I hook an IDE CD-ROM up to the system, the ata_piix driver somehow can get access to the SATA drives first and they use the SCSI subsystem and I get infinitely better performance. However, I have to disconnect one of the SATA drives to attach a CD-ROM drive (don't have a power splitter currently). Without the CD-ROM drive, dmesg shows the IDE driver assigning hda and hdc to my two SATA drives -- and later: ata_piix version 1.03 ata_piix: 0x1f0 IDE Port busy ata_piix: probe of 0000:00:1f.2 failed with error -16 Booting with noprobe doesn't appear to solve this problem. My current thought is to modify the modules.pci, etc stuff to have my PCI device id not match up with the IDE driver. Any other suggestions? Ray -- Ray Van Dolson Linux/Unix Systems Administrator Digital Path, Inc.

2 2

yumex questions
by Robert Moskowitz 21 Mar '06

21 Mar '06

I am looking at yumex on my toshiba, trying to create a kickstart for my hp..... What is profiles? Is it possible to build a list completely of install, ignoring the current install? Again, I am trying to help myself along with kickstart. And how do I tell what is just installed without having to be selected? So I do not see freeradius listed not in the update selection nor the install selection. A rpm -qa|grep radius shows freeradius installed on the toshiba. It would be 'neat' of kickstart config could take advantage of yumex....

3 4

Reliable Athlon 64 motherboards
by Jeremy Sanders 21 Mar '06

21 Mar '06

Hi - We're looking for a reliable Athlon 64 motherboard. Hopefully this will support 4600+ (dual core) processors, SATA, and hopefully gigabit networking. Reliability is the key. We've tried using an MSI K8NGM2-FID, based on the nforce chipset. This works fine and the gigabit forcedeth appears reliable with the latest kernel update. However it oopses every few days for no apparent reason. We've also tried an Asus A8V-E SE (VIA chipset), but this appears terrible. The sky2 driver works (with the latest kernel update for 4.2, or the jwl test kernels), but then hangs after an hour or two of transferring data. We then tried a tg3 network card and an e1000, and this corrupts the data transferred between it and another computer. Maybe it is the SATA corrupting the data, but who knows. No obvious errors in the logs except for lost ticks. Tried non-SMP, 32 bit, noapic, acpi=off. No luck. Does anyone have a recommendation for a reliable board? Otherwise we have to buy Intel and get the speed loss... Many thanks Jeremy -- Jeremy Sanders <jss(a)ast.cam.ac.uk> http://www-xray.ast.cam.ac.uk/~jss/ X-Ray Group, Institute of Astronomy, University of Cambridge, UK. Public Key Server PGP Key ID: E1AAE053

2 2

Request for good advice to upgrade kernel
by Kari Salovaara 21 Mar '06

21 Mar '06

Hi, first I want to thank maintainers of this excellent distro. I've had no problems, even I'm using quite new motherboard (Asus P5WD2) and dualcore Intel D 820 processor. I've updated all packages when You have announced them. At the moment the kernel is 2.6.9-34ELsmp and it works well. But I've lost some understanding how these kernel versions flow ! I'm also a little confused of some related answers from some forums and lists. Questions : - is the kernel version used in CentOS the same as in kernel.org ? - if the kernel versions don't match, where do I get information which mathes which ? The other question (very much relates to the later part of previous question and the need to do kernel compilation at all) : - if I want to compile new kernel using kernel source from kernel.org, what is the best way regarding to maintain the workability level of exisisting kenel (see top)? -- can I use .config-file from working 2.6.9-34ELsmp source and compile straight using that (first to see a working new kernel and then make some adjustments) ? In this way I can save a lot of time and frustration when setting the flags for compilation. Any other important to remember ? (I've compiled kernel since Linux 0.6 so no newbee recommendations. ;-) ) -- I need monitoring for many servers (thermal etc.) and of course they are remote. I would like to use OpenIPMI which seems to be the most modern method and thus would survive for some years (not expected of some other methods/applications) -- these issues are important to due I've more than 1 server and I'd like to use similar approach in each. Could You point me a) documents to wise upgrade of kernel in CentOS 4.x environment ? b) if there exists, example of use OpenIPMI ? You can also send answers directly as this topic might not interest wider public. Best regards, Kari Salovaara -- Kari Salovaara Hanko, Finland

4 6

webmin
by boricua 21 Mar '06

21 Mar '06

is there a yum repo for webmin?

3 2

Re: [CentOS] webmin
by Will McDonald 21 Mar '06

21 Mar '06

On 21/03/06, boricua <boricua(a)despiertapr.com> wrote: > On Tue, 21 Mar 2006 12:56:34 +0000 > "Will McDonald" <wmcdonald(a)gmail.com> wrote: > > > On 21/03/06, boricua <boricua(a)despiertapr.com> wrote: > > > is there a yum repo for webmin? > > > > Webmin's available from RPMForge/Dag. > > i am faily new to both centos and yum > how can i add the repor to my yum? http://dag.wieers.com/home-made/apt/FAQ.php Setup Dag's GPG key... rpm --import http://dag.wieers.com/packages/RPM-GPG-KEY.dag.txt Then either create /etc/yum.repos.d/dag.repo and add the following... #<---------------------CUT---------------------># [dag] name=Dag RPM Repository for Red Hat Enterprise Linux baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgcheck=1 enabled=1 #<---------------------CUT---------------------># Or just add the above to /etc/yum.conf You may also want to limit the packages you get from non base CentOS repositories so you know exactly which repo specific additional packages are coming from. You do that with the includepkgs= directive as follows... #<---------------------CUT---------------------># [dag] name=Dag RPM Repository for Red Hat Enterprise Linux baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgcheck=1 enabled=1 includepkgs=webmin perl-Mon perl-Authen-PAM perl-Net-SSLeay #<---------------------CUT---------------------># You need perl-Mon, perl-Net-SSLeay and perl-Authen-PAM to fulfil some webmin dependencies (the others are fulfilled by the default CentOS repositories IIRC). [root@dblvsserv1a ha.d]# rpm -qR webmin perl perl(Net::SSLeay) perl(CGI) perl(Mon::Client) perl(Authen::PAM) openssl /bin/sh /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Will.

1 0

High-Availability Clustering and drbd?
by Benjamin Smith 21 Mar '06

21 Mar '06

Does anyone here on this list have experience with HA clustering? I'm previewing drbd as a potential tool, and wanted to know if anyone here has experiemented with it at all... How stable is it? Does the additional likelyhood of failure given the additional complexity actually get compensated by a better overall system? http://www.drbd.org/ Any feedback is welcome... -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

5 7

hpoj, file missing from 4.2 package
by Paul Schoonderwoerd 21 Mar '06

21 Mar '06

Besides printing, the HP OfficeJet T45 is also capable of scanning and is supported by the hpoj package and sane. I could not get this working however under Centos 4.2 (and this already once stopped working in the past after doing an upgrade on RedHat 8). Sane would not find the scanning device. I finally found that the one important library that is missing from the hpoj package (hpoj-0.91-9) is libsane-hpoj.so.1.0. I solved this by compiling hpoj from source, copying the file to /usr/lib/sane and creating two links in the same dir to it: libsane-hpoj.so and libsane-hpoj.so.1 .Not ideal but it works. I take it the file is also missing upstream ? Now kooka (also) scans perfectly. The one thing I now still have to solve is that printjobs stay in the queue while the hpoj service is running. I guess I have to define the printer differently because hpoj locks the parallel port. Currently it is using the hpijs driver. Regards, -- Paul Schoonderwoerd Pollux IT - Open Source & Netwerkbeveiliging tel: 0294-283832 http://www.Pollux-IT.nl

1 0

Installing additional perl modules
by Chin 21 Mar '06

21 Mar '06

Hi all, What is the best way to install additional perl modules? Is there any yum repositories that I can pull the rpms from? I prefer not to use CPAN or compile the modules myself because that'll break the purpose of using enterprise Linux and risk the chances of breaking the dependancies. (I am not a Linux guru, I may be wrong here, sorry.) I am now trying to install some modules like MIME::parser, Date::Parse, Date::Format, etc. Thank you. __________________________________ Do you Yahoo!? Yahoo! Movies - Search movie info and celeb profiles and photos. http://sg.movies.yahoo.com/

2 1

FreeRadius version
by Robert Moskowitz 21 Mar '06

21 Mar '06

It seems to me that the ver of FreeRadius is 1.0.1: yum list | grep "radius" freeradius.i386 1.0.1-3.RHEL4 installed freeradius-mysql.i386 1.0.1-3.RHEL4 base freeradius-postgresql.i386 1.0.1-3.RHEL4 base freeradius-unixODBC.i386 1.0.1-3.RHEL4 base According to freeradius.org, this was released 8/17/04 and 1.1.0 was released 1/12/06 Why is the distributed version so far behind? Also I am trying to figure out how to get dialup_admin working. I cannot find any reference to it, how to get it working within Apache and access it.... (Hopefully Alan is here at IETF, and can help me).

3 2

gdm
by boricua 21 Mar '06

21 Mar '06

quick tip on how to add xfce to gdm/session login screen

2 2

problem in installing Internet Explorer6 with SP1 on Centos4.0 through Winetools
by ankush grover 21 Mar '06

21 Mar '06

hey friends, I am trying to install Internet Explorer 6 with SP1 on Centos through Winetools but everytime it failed.I have installed dcom98.exe and microsoft foundation classes 4.x. The rpms installed on centos4.0 winetools-0.9-3jo wine-0.9.2-1centos4winehq The logs of winetools are Unhandled exception: page fault on read access to 0x7be302a0 in 16-bit code (114 f:0000). In 16 bit mode. Register dump: CS:114f SS:1087 DS:1157 ES:1157 FS:003b GS:0033 IP:0000 SP:ffcc BP:fffa FLAGS:0296( - 00 RISAP1) AX:0000 BX:0000 CX:0200 DX:0000 SI:0000 DI:1156 Stack dump: 0x1087:0xffcc: 0458 101f 0000 0000 0000 0000 0001 0000 0x1087:0xffdc: 0000 0000 0000 0000 0000 0000 0000 0000 0x1087:0xffec: 0000 0000 0000 0000 0000 0000 0000 0000 022a: sel=1157 base=7be30628 limit=0000027f 16-bit rw- Backtrace: =>1 0x114f:0x0000 (0x114f:0x0000) 2 0x003be16d K32WOWCallback16Ex+0xbd in kernel32 (0x003be16d) 3 0x0038f4fc NE_InitializeDLLs+0x1d1 in kernel32 (0x0038f4fc) 4 0x0038b9e9 in kernel32 (+0x3b9e9) (0x0038b9e9) 5 0x0038c9ae LoadModule16+0x2b4 in kernel32 (0x0038c9ae) 6 0x0038cb59 LoadLibrary16+0x25 in kernel32 (0x0038cb59) 7 0x003b2816 in kernel32 (+0x62816) (0x003b2816) 8 0x003b2c13 ThunkConnect32+0x134 in kernel32 (0x003b2c13) 9 0x716a10f5 EntryPoint+0x17 in w95inf32 (0x716a10f5) 10 0x00eef695 in ntdll (+0x1f695) (0x00eef695) 11 0x00eef963 in ntdll (+0x1f963) (0x00eef963) 12 0x00ef051a LdrLoadDll+0x5d in ntdll (0x00ef051a) 13 0x00388cae in kernel32 (+0x38cae) (0x00388cae) 14 0x00388ec2 LoadLibraryExW+0x4f in kernel32 (0x00388ec2) 15 0x00388fa3 LoadLibraryExA+0x43 in kernel32 (0x00388fa3) fixme:dbghelp:sffip_cb NIY on 'advpack.pdb' 16 0x715f53b8 EntryPoint+0xaf3 in advpack (0x715f53b8) 17 0x715f8285 in advpack (+0x8285) (0x715f8285) 18 0x715f9151 in advpack (+0x9151) (0x715f9151) 19 0x715f9326 TranslateInfString+0x88 in advpack (0x715f9326) fixme:dbghelp:sffip_cb NIY on 'ie6wzdex.pdb' 20 0x01016f73 in ie6wzd (+0x16f73) (0x01016f73) 21 0x010199e4 in ie6wzd (+0x199e4) (0x010199e4) 22 0x00000000 (0x00000000) 0x114f:0x0000: incw %bp Modules: Module Address Debug info Name (67 modules) ELF 0x00101000-0011a000 Deferred libwine.so.1 ELF 0x0011c000-00212000 Deferred libwine_unicode.so.1 ELF 0x002eb000-0030a000 Deferred mpr<elf> \-PE 0x002f0000-0030a000 \ mpr ELF 0x0030a000-00323000 Deferred version<elf> \-PE 0x00310000-00323000 \ version ELF 0x0032c000-0042e000 Export kernel32<elf> \-PE 0x0032f000-00334000 \ libxxf86vm.so.1 \-PE 0x00350000-0042e000 \ kernel32 ELF 0x0043b000-00478000 Deferred advapi32<elf> \-PE 0x00450000-00478000 \ advapi32 ELF 0x00478000-0048c000 Deferred lz32<elf> \-PE 0x00480000-0048c000 \ lz32 ELF 0x0048c000-004aa000 Deferred iphlpapi<elf> \-PE 0x00490000-004aa000 \ iphlpapi ELF 0x004cb000-004e2000 Deferred ld-linux.so.2 ELF 0x004e4000-0060e000 Deferred libc.so.6 ELF 0x00610000-00614000 Deferred libdl.so.2 ELF 0x00616000-0061b000 Deferred libxxf86dga.so.1 ELF 0x00616000-0061b000 Deferred libxxf86dga.so.1 ELF 0x0063b000-0064d000 Deferred libpthread.so.0 ELF 0x0064f000-00716000 Deferred libx11.so.6 ELF 0x0064f000-00716000 Deferred libx11.so.6 PE 0x00680000-00737000 Deferred comctl32 PE 0x00680000-00737000 Deferred comctl32 PE 0x00680000-00737000 Deferred comctl32 ELF 0x0073a000-00742000 Deferred libsm.so.6 ELF 0x00744000-0075c000 Deferred libice.so.6 ELF 0x0075c000-00770000 Deferred riched32<elf> \-PE 0x00760000-00770000 \ riched32 ELF 0x00773000-0077b000 Deferred libgcc_s.so.1 ELF 0x0077b000-00807000 Deferred ole32<elf> \-PE 0x0077d000-007e4000 \ libfreetype.so.6 \-PE 0x00790000-00807000 \ ole32 \-PE 0x00790000-00807000 \ ole32 ELF 0x0080e000-00819000 Deferred libnss_files.so.2 ELF 0x00819000-0085e000 Deferred rpcrt4<elf> \-PE 0x00830000-0085e000 \ rpcrt4 ELF 0x008d3000-008f9000 Deferred libfontconfig.so.1 ELF 0x008f9000-00979000 Deferred winex11.drv<elf> \-PE 0x0090f000-00917000 \ libxrender.so.1 \-PE 0x00910000-00979000 \ winex11.drv \-PE 0x00910000-00979000 \ winex11.drv ELF 0x009e2000-00a60000 Deferred libgl.so.1 ELF 0x009e2000-00a60000 Deferred libgl.so.1 PE 0x00a80000-00b82000 Deferred user32 ELF 0x00c00000-00c1d000 Deferred imm32<elf> \-PE 0x00c10000-00c1d000 \ imm32 ELF 0x00c1d000-00c50000 Deferred uxtheme<elf> \-PE 0x00c30000-00c50000 \ uxtheme ELF 0x00c81000-00c9d000 Deferred ximcp.so.2 ELF 0x00c9d000-00d66000 Deferred shell32<elf> \-PE 0x00cb0000-00d66000 \ shell32 ELF 0x00d66000-00dc0000 Deferred shlwapi<elf> \-PE 0x00d80000-00dc0000 \ shlwapi ELF 0x00dc0000-00e15000 Deferred setupapi<elf> \-PE 0x00dd0000-00e15000 \ setupapi ELF 0x00eb9000-00f2f000 Export ntdll<elf> \-PE 0x00ed0000-00f2f000 \ ntdll ELF 0x00fd6000-00fd8000 Deferred xlcutf8load.so.2 PE 0x01000000-01034000 Export ie6wzd ELF 0x39719000-3a10d000 Deferred gdi32<elf> \-PE 0x39730000-3a10d000 \ gdi32 PE 0x48000000-4806c000 Deferred riched20 PE 0x715f0000-71617000 Export advpack PE 0x716a0000-716a7000 Export w95inf32 ELF 0x7bf00000-7bf03000 Deferred <wine-loader> Threads: process tid prio (all id:s are in hex) 00000012 (D) C:\windows\temp\IXP001.TMP\ie6wzd.exe 00000013 0 <== 00000010 00000011 0 WineDbg terminated on pid 0x12 waiting for wineservers to exit... all wineservers endet after 1 seconds... Failed: 0 check installation by path or registry value... waiting for wineservers to exit... all wineservers endet after 0 seconds... Microsoft Internet Explorer.* to check software installation verified by /home/ankush/.wine/winetools.log Failed: 1 Failed: 1 mv: cannot stat `/home/ankush/.wine/dosdevices/c:/windows/system32/regsvr32.exe' : No such file or directory du: cannot access `/home/ankush/winetools/sys/Windows Update Setup Files': No su ch file or directory du: cannot access `/home/ankush/.wine/c/windows/Windows Update Setup Files': No such file or directory Downloaded IE6-Files=0 Winetools IE6-Files=0 Choice is Create a Fake Windows drive with checked=F waiting for wineservers to exit... all wineservers endet after 0 seconds.. What can be the problem ? Thanks & Regards Ankush Grover

3 3

POP3/IMAP Proxy
by Peter Kitchener 21 Mar '06

21 Mar '06

What is a popular/good POP3/IMAP proxy? that is suitable for CentOS4.3 Regards Peter

4 6

Re: [CentOS] FreeRadius version
by Robert Moskowitz 21 Mar '06

21 Mar '06

At 03:14 PM 3/20/2006, Jim Perrin wrote: >On 3/20/06, Robert Moskowitz <rgm(a)htt-consult.com> wrote: > > It seems to me that the ver of FreeRadius is 1.0.1: > > > > yum list | grep "radius" > > freeradius.i386 1.0.1-3.RHEL4 > > installed > > freeradius-mysql.i386 1.0.1-3.RHEL4 base > > > > freeradius-postgresql.i386 1.0.1-3.RHEL4 base > > > > freeradius-unixODBC.i386 1.0.1-3.RHEL4 base > > > > According to freeradius.org, this was released 8/17/04 and 1.1.0 was > > released 1/12/06 > > > > Why is the distributed version so far behind? > >For centos, the answer is "Because that's what upstream provides". >For upstream, no idea what their reasoning is. >Keep in mind that the idea isn't to have the latest&greatest, but to >have a stable solution. Well, OK. 1.1.0 just came out, everything until then was patches to 1.0 ... Just got off the phone with DeKok (work with him at the IETF, when he comes), and he helped me along. The upstream does not include user_admin tool. Got enough working for what I need this week. >-- >"They that can give up essential liberty to obtain a little temporary >safety deserve neither liberty nor safety'' >Benjamin Franklin 1775 >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

3 3

ls --author ?
by James B. Byrne 21 Mar '06

21 Mar '06

I want a script to determine the owner of a particular file and then "sudo -u <thatuserid> <somecomand>". I ran across the --author option of ls but that does not seem to give me anything useful. It prints a short form of the filename without any other information at all. In fact, the output of ls --author is indistinguishable from that of ls by itself: > # ls --author htdocs/* > htdocs/hlllogo.png > # ls htdocs/* > htdocs/hlllogo.png > # Is there a linux command that will return just the userid in a form that can be passed to sudo or do I have to parse ls -l <filename>? I am digest subscriber so, if you could provide one, the favour of a direct copy of your reply is requested. Regards, Jim -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

4 3

patches and current CD's [dnk]
by dnk 21 Mar '06

21 Mar '06

I was reading another thread, and this stuck out at me: "This issue was fixed by the CentOS team (and integrated into our install CD) prior to it's release by the upstream provider." As patches and such are released - are they integrated into the current CD's right away? So say for example, I downloaded the server CD a few months ago, then re-downloaded, would the patches from point a to point b already be integrated into the cd's? Thanks!

4 5

Re: [CentOS] New user and stupid issue
by Sean Roe 20 Mar '06

20 Mar '06

I think you are right about the selinux, I will test it later tonight because I have to go to co-lo cause I locked it up. To fix this do I need reload the OS? I know I enabled selinux during the install. Nope I never worked at etrade, used to have an etrade account though :) Sean Rick Philbrick wrote: > Hi, > > Here's a stab in the dark are you running with selinux enabled ? > the commands getenforce and selinuxenabled should tell you if you are. > > BTW- Did you work at etrade ? I knew a sean roe there but I am not > sure if he spelled it rowe. Sorry had to ask. > > Rickp > > > On 3/20/06, Sean Roe <> wrote: > >> Hi All, >> >> I am a new Centos user (old Red Hat and Debian user) and I'm having a >> very strange problem. I just installed Centos V4 and it appears to be >> running fine except for a weird issue. If I am on the systems console, >> I can write all kinds of files anywhere I choose. But if I am ssh'd in >> to the box it appears I can not write any files on the file systems. >> Since this box is across town, it makes it difficult to go to the >> console to make changes. Any guidance would be great. >> >> Thanks, >> Sean >> >> >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos >> >>

2 1

Re: [CentOS] ls --author ?
by James B. Byrne 20 Mar '06

20 Mar '06

On 20 Mar 2006 at 13:42, Paul Heinlein wrote: > Of course, the real answer is > > svnadmin create --fs-type fsfs If only I had known then what I know now.... Regards, Jim -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

1 0

New user and stupid issue
by Sean Roe 20 Mar '06

20 Mar '06

Hi All, I am a new Centos user (old Red Hat and Debian user) and I'm having a very strange problem. I just installed Centos V4 and it appears to be running fine except for a weird issue. If I am on the systems console, I can write all kinds of files anywhere I choose. But if I am ssh'd in to the box it appears I can not write any files on the file systems. Since this box is across town, it makes it difficult to go to the console to make changes. Any guidance would be great. Thanks, Sean

2 1

installing yum on RHEL 7.2
by Nick Smith 20 Mar '06

20 Mar '06

im very new to RH, and even more so to YUM, but i need to install it on a RHEL 7.2 server, which i have done but installing the RPM package, and updated it via the Centos2 archives. The program i am trying to install is bacula, a backup/tape program on one of our old servers, we need to upgrade to a newer version. I didnt want to deal with the deps, so i thought yum was the way to go. well, it cant find bacula, and i even downloaded the rpm from their website, and tried to get yum to install it that way "yum install bacula.rpm" and that doesnt work either, i get a: # yum install bacula-mysql-1.38.5-4.101mdk.i586.rpm Gathering package information from servers Getting headers from: CentOS-2 base Getting headers from: CentOS-2 updates Finding updated packages Downloading needed headers Cannot find a package matching bacula-mysql-1.38.5-4.101mdk.i586.rpm can anyone shed some light on this for me? im kinda lost here. ive googled and found some good centos docs, but it doesnt solve my problem, the "localinstall" switch i guess is not supported anymore according to something i read on the net, and it doesnt work either when i try it. how can i get this installed with something that will handle the deps for me? am i even asking the right question? thanks for any help you can give. Nick

4 3

Re: [CentOS] ls --author ?
by James B. Byrne 20 Mar '06

20 Mar '06

On 20 Mar 2006 at 10:23, Paul Heinlein wrote: > stat -c %U filename > > The stat(1) man page has format details; it's part of the > coreutils rpm Thank you. This is far more elegant than my solution: _SVNUSER_=$(ls -l /var/spool/svn/db/__db.001 | cut -d" " -f4) Regards, Jim -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

1 0

phpMyAdmin login problems
by rado 20 Mar '06

20 Mar '06

Hi! running 4.2 and the latest stable phpMyAdmin 2.8.0.1 of course all the lamp stuff is running. Alexander Dalloz helped me a good bit on the installation which I am truly gratefull. And then I brought it to a point where I can log on from local as any user and give it the anon's password and phpmyadmin will come up w/of course no privileges. I can log on as root from local w/the password and it will come up as root should w/all privileges. coming in from the web is a different story: if one tries to log on from the web to the following url and msg: The URL is this: http://rivers-bend.com/phpmyadmin/index.php The Browser page shows this: Forbidden You don't have permission to access /phpmyadmin/index.php on this server. -------------------------------------------------------------------------------- Apache/2.0.52 (CentOS) Server at rivers-bend.com Port 80 ok this is 1 of 3 problems I can't seem to get a handle on. 2.Well, ...trying to go by the book...I have anon users all to the same password and root having it's own. I am having trouble having a user w/his own password to have special privileges, i.e. to have control over his own database. I have even tried to set it up in phpmyadmin as root through privileges but no dice. this same user can log on w/his user name and the anon password tho. 3rd and last problem: mysql: mind you I am still trying to get the passwords staight and I know next to nothing about mysql yet. but there is reference to "host" and in the mysql.user file ...well, you know how everything is spelled out in localhost and then in "host" in my case it's rbmain1.rivers-bend.com. What I am concerned about is that I run 2 servers mirroring each other and really makes no difference who's got the ball. the other server is rbmain2 but I am hoping this will take care of itself down the line. whew! I'm sorry for all this. geez thx y'all John Rose

4 6

Why does CentOS 3.X still use yum 2.0.8?
by Greg Bailey 20 Mar '06

20 Mar '06

I understand that the CentOS packages track the upstream vendor's packages as closely as possible. In the case of yum, which as far as I'm aware is added by the CentOS team, I'm curious why it isn't upgraded to a newer version that uses the repomd format. "yum" operations on CentOS 4 seem to be significantly faster than those on CentOS 3. I recall a yum upgrade happening between CentOS 4.1 and 4.2, and I'm wondering if such an upgrade could happen on CentOS 3 as well... Thanks, Greg

2 1

NTP
by Sam Drinkard 20 Mar '06

20 Mar '06

I'm having a bit of trouble with the ntpd on my server. When I login and execute either ntpd or ntpq, and enter either a dmpeers or peers, it returns a message "Name or service not known". It has the same ntp configuration as the x86_64 machine here at home, which works as advertized. The daemon is running and I've even done a restart to make sure it's reading in the peers. Is there something I'm missing somehow that I get the no service or name error? FWIW, you can enter a host or peer, such as time.nist.gov or ntp1.twc.weather.com but after doing that, and then issuing the dmpeers command, it returns for hosts LOCAL(0) 127.0.0.1 and *HOPF_S(0) 127.0.0.1 both with all the offsets, delay, poll, etc... Suggestions? Sam

1 0

USB key problems on enterprise systems
by Collins Richey 20 Mar '06

20 Mar '06

Just came up with some interesting (read: frustrating) problems on RHEL3 and RHEL4 today at work, and I've confirmed one of the problems on my up-to-date CentOS4 system at home. I was forced into releasing some RHEL3 systems to replace our aging RH9 systems without time for adequate testing, and that leads to problems like these. On our legacy RH9 systems, mounting a USB key is no problem, but I can't get it to work on either RHEL3-U6 or RHEL4-U2 (= CentOS4). I'm curious if any CentOS3 or CentOS4 users have any suggestions. Here are the results from plugging in a USB Key and trying to mount it: 1. On RHEL3-U6, some systems get the following, and there is a workaround: Message: USB device not accepting new address Workaround: /sbin/modprobe -r ehci-hcd Message: READ CAPACITY failed ... Unable to read partition table Workareound: none that I am aware of. The above workaround has no effect. 3. RHEL4-U2 and CentOS4 get the following: No possibility to mount. As soon as you plug in the USB key, the system goes into a SCSI error loop until you unplug it. I've googled extensively for an answer, found a few hits for the RHEL3 problem, but no useful solutions. The RHEL4 problem is apparrently a 2.6 kernel bug. Doe anyone know of a packaged kernel solution for this? I'm using the CentOS unsupported kernel at home, but same problem as in the stock RHEL4 kernel. Have RH possibly fixed this in the U3 beta? In case you're wondering about the key(s), the mount works flawlessly including KDE automounting the key on my Kubuntu Dapper development system with kernel 2.6.15-16-386 #1 PREEMPT. TIA, -- Collins Richey The agnostic dyslexic insomniac lies awake wondering if there is a dog.

6 9

python 2.4.2
by Jure Pečar 20 Mar '06

20 Mar '06

Hi all, Has anyone sucessfully compiled python 2.4.2 on centos 4.2 x86_64? I'm trying with soon-to-be fc5 source rpm and it wants to convice me it doesn't know about libX11, but it is there: #rpmbuild -bb python.spec [snip] gcc -pthread -shared Modules/linuxaudiodev.o -o Modules/linuxaudiodev.so gcc -pthread -shared Modules/timingmodule.o -o Modules/timingmodule.so gcc -pthread -shared Modules/_tkinter.o Modules/tkappinit.o -ltix -ltk -ltcl -lX11 -o Modules/_tkinter.so /usr/bin/ld: cannot find -lX11 collect2: ld returned 1 exit status but: # ldconfig -v |grep X11 ldconfig: /usr/X11R6/lib: libX11.so.6 -> libX11.so.6.2 /usr/X11R6/lib64: libX11.so.6 -> libX11.so.6.2 and: # locate libX11 /usr/X11R6/lib/libX11.so.6 /usr/X11R6/lib/libX11.so.6.2 /usr/X11R6/lib64/libX11.a /usr/X11R6/lib64/libX11.so /usr/X11R6/lib64/libX11.so.6 /usr/X11R6/lib64/libX11.so.6.2 I'm without ideas what's going on here. Anyone? -- Jure Pečar http://jure.pecar.org/

3 4

Bad repo file
by Lorin B Pino 20 Mar '06

20 Mar '06

I have yum working with dags and dries, etc, but I have done something to the main repo file that causes yum to error. Can anyone tell me what is wrong with this file? CentOS-Base.repo # # This file uses a new mirrorlist system developed by Lance Davis for CentOS. # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-4 - Base #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os baseurl=http://mirror.centos.org/centos/4/os/i386/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #released updates [update] name=CentOS-4 - Updates #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates baseurl=http://mirror.centos.org/centos/4/updates/i386/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #packages used/produced in the build but not released [addons] name=CentOS-4 - Addons #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons baseurl=http://mirror.centos.org/centos/4/addons/i386/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #additional packages that may be useful [extras] name=CentOS-4 - Extras #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras baseurl=http://mirror.centos.org/centos/4/extras/i386/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-4 - Plus #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus baseurl=http://mirror.centos.org/centos/4/centosplus/i386/ gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #contrib - packages by Centos Users [contrib] name=CentOS-4 - Contrib #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib baseurl=http://mirror.centos.org/centos/4.2/contrib/i386/ gpgcheck=1 enabled=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 By the way, I have just subscribed to this list, and already see that it has it's share of complainers. I have only used CentOS for a few weeks, but I am enjoying the experience. I tried FC4, but yum would hang each time I tried it, so it has been good to have things work. Good work on this distro! For whatever that is worth from a newbie. TIA ~Lorin

5 7

kannel from dag - sqlite conflict with centos 4.2
by Tony 20 Mar '06

20 Mar '06

I have a CentOS 4.1 box running Dag's Wieers kannel 1.4.0-3.2.el4.rf package which has a dependency on sqlite version 2.8.16-1.2.el4.rf also from Dag. If I try to up2date to centos 4.2 I'm hitting a conflict whereby 4.2 wants to install sqlite 3.2.2 - but kannel doesn't like that, reporting: Unresolvable chain of dependencies: kannel 1.4.0-3.2.el4.rf requires libsqlite.so.0 The new 3.2.2 version only provides libsqlite3.so.0. Anyone else seen this, or have any recommendations as to how I can have 4.2with kannel still installed? -- Cheers, Tony

6 10

libtiff-3.6.1-8 and HylaFAX 4.2.5
by Chin 20 Mar '06

20 Mar '06

Hi, I am currently replacing my old Hylafax server to a new hardware with CentOS 4.2 (x86_64). Since CentOS 4.2 (and probably RHEL4) is shipping with libtiff-3.6.1-8, I'm wondering if this version of libtiff has the patch mentioned in the hylafax bugzilla http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500 and/or is it compatible with the latest Hylafax 4.2.5 (i read libtiff-3.6.1 is mentioned in the release notes as having a fatal flaw). It will be against the main purpose of using an enterprise linux if I am to update this library myself. There are binary packages for RHEL3/4, not sure whether they are compiled with libtiff-3.6.1-8 too. I can run 'rpm --test ...' on my new machine with the Fedora Core 3 (x86_64) but I haven't decided whether to go ahead or not. Thank you. --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather

3 5

Bad repo file (solved)
by Lorin B Pino 20 Mar '06

20 Mar '06

I hit the delete button too quick, and don't know who to thank. I ended up deleting the file title and description (that were all commented out), and yum now uses it. Thanks ~Lorin

1 0

Hi
by PV Juliet 20 Mar '06

20 Mar '06

HI All, I made a distribution CD in CentOS. But when i am installing from CD it displays an error message "gunzip : std ..... /mnt/sysimage /bin/cpio : premature end of file " Any one knows why it happens like this ??? Regards juliet

2 1

Re: [CentOS] Re: Mirror Mirror on the wall, who is the slowest of them all? CentOS
by Chris Hammond 19 Mar '06

19 Mar '06

Very well said and I second this 100000000%. Chris >>> peter(a)farrows.org 03/19/06 2:04 pm >>> Dear All, Centos works for me, it is indeed a godsend. I know how much effort it takes to create such a distribution and test it. I am grateful for all the hard effort it takes. Lets not keep the Centos team tied up with threads like this that really do little more that use bandwidth and storage space in the long run for no real benefit. Those people who make good use of Centos know had solid it is, nothing more needs to be said, if anyone disagrees, they should vote with their feet and go somewhere else, but don't bother flaming people here, because it neither necessary nor wanted, nor justified. Anybody who has the audacity to criticise people who do stuff to their very best for free for the benefit of others really, does need grow up and have a reality check. Lets end it here boys and girls, if you don't like Centos then stop wasting the time of those of us who do, and push off now. regards Pete Scott Silva wrote: > Jim Smith spake the following on 3/18/2006 7:40 AM: > >> --- Craig White <craigwhite(a)azapple.com> wrote: >> >> >>> is it possible that you don't consider how offensive that comments >>> like >>> this and your insensitive and ill- informed comments last week about >>> the >>> various repos are? >>> >>> You just earned the ticket to /dev/null on my sieve scripts >>> >>> Craig >>> >> Are you the same Craig who claims to have no experience at all of kde >> somewhere on the net and elsewhere you praise the kde- redhat repo? >> Shambolic? >> >> As the the rest of you cowboys, tell me other than WhiteBox who is >> the slowest to release updates. >> >> Don't take this personally, but a cold reality check will enable you >> to understand the reality of the situation. >> >> Don't get me wrong, CentOS is (for the most part) doing a superb job. >> You can guess what needs to be improved upon. >> >> Johnny and the team need reality comments rather than ass- kissing >> lamers. >> >> >> __________________________________________________ >> Do You Yahoo!? >> Tired of spam? Yahoo! Mail has the best spam protection around >> http://mail.yahoo.com >> > Anyone calling CentOS slow hasn't used Debian! But why sit here and bash > someone for their unpaid volunteer work! It isn't like they are getting six > figure salaries to make people happy. If you want fast, go get the source rpms > and rebuild them, and don't come back here asking for help from these > overworked and under respected volunteers! > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Darwin Streaming Server (was Re: Build on CentOS 4?)
by Chris Mauritz 19 Mar '06

19 Mar '06

Steve Pflaum wrote: > Hi- > I'm having trouble getting DSS to run on CentOS 4. Has anyone > successfully compiled the source on this platform? > > It looks like the DSS linux binary version was built using gcc 3.2 and > an older version of glibc so the symbol names in the libc files are > different which is why it will not run. > > Can anyone help? I haven't built it in a while, but the last time I think I was using 3.5 and it built right out of the box once I installed the compatibility libs and turned off the SELinux bits in the kernel. The latter may not be necessary if you don't mind all the error messages in the logs. I'd also suggest turning off iptables until you settle on which ports you'll be using, then you can lock it back down. It works pretty well. I ended up going with QTSS running on a dual G5 since I had a spare one laying around and QTSS includes all the fancy management tools that are missing from DSS. If you have any specific questions, feel free to email me. Cheers,

1 0

CentOS-announce Digest, Vol 13, Issue 8
by centos-announce-request＠centos.org 19 Mar '06

19 Mar '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0266 Important CentOS 4 ia64 gnupg - security update (Pasi Pirhonen) 2. CESA-2006:0266 Important CentOS 4 s390(x) gnupg - security update (Pasi Pirhonen) 3. CESA-2006:0266 Important CentOS 4 s390(x) axp - security update (Pasi Pirhonen) 4. CESA-2006:0266 Important CentOS 3 ia64 gnupg - security update (Pasi Pirhonen) 5. CESA-2006:0266 Important CentOS 3 s390(x) gnupg - security update (Pasi Pirhonen) 6. CESA-2006:0144 Moderate CentOS 3 ia64 kernel - updated kernel package (Pasi Pirhonen) 7. CESA-2006:0144 Moderate CentOS 3 s390(x) kernel - updated kernel package (Pasi Pirhonen) 8. CESA-2006:0015 Moderate CentOS 3 ia64 initscripts - security update (Pasi Pirhonen) 9. CESA-2006:0015 Moderate CentOS 3 s390(x) initscripts - security update (Pasi Pirhonen) 10. CESA-2006:0045 Moderate CentOS 3 ia64 squid - security update (Pasi Pirhonen) 11. CESA-2006:0045 Moderate CentOS 3 s390(x) squid - security update (Pasi Pirhonen) 12. CESA-2006:0117 Low CentOS 3 ia64 vixie-cron - security update (Pasi Pirhonen) 13. CESA-2006:0117 Low CentOS 3 s390(x) vixie-cron - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 18 Mar 2006 18:19:46 +0200 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2006:0266 Important CentOS 4 ia64 gnupg - security update To: centos-announce(a)centos.org Message-ID: <20060318161946.GA17738(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2006:0266 https://rhn.redhat.com/errata/RHSA-2006-0266.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/gnupg-1.2.6-3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

multiple signed ssl certificatess on single IP address
by Ara Avvali 19 Mar '06

19 Mar '06

Good afternoon everyone, This is my first post here. I was wondering if someone could clear my mind about this. I have a dedicated server with a single ip address assigned to it. I want to host couple of site which are hosted somewhere else and they have signed certificates. Now I want to host them all on this single server. Is it possible to bound more than one cert to a single IP based apache server and host multiple virtual directories? I did a research on line and found couple answers which are all confusing me. One suggested that I need to get additional ip's and assign different sites to it. (Not a very practical solution) Other one says we can use the same cert and ip but have secondary host on different port number than default. Something likes https://www.abc.com <https://www.abc.com/> and https://www.def.com:444 <https://www.def.com:444/> and so on. But this will cause people a warning regarding the certificate error on second path, is that correct? Some one suggested a wild card certificate but how can I do that since dedicated server name is a.dedicated.hostingcompany.com and I need to generate certificates covering *.abc.com and *.def.com Would someone kindly clear my mind on this issue?

6 6

RE: [CentOS] multiple signed ssl certificatess on single IP address
by Ara Avvali 19 Mar '06

19 Mar '06

Hi Thanks for fast response. A: is expensive and I can't do it. They want 10/ ip per month so for a bout 10 site we are talking 100 dollars a month B: is better if I could convince them, but as you stated we might face problem with none standard port numbers C: sound fair and I need to search for it. We have plesk and I just saw this article. Do you think it is the solution for my question? http://www.digicert.com/ssl-certificate-installation-plesk.htm appreciated the help -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Maciej Zenczykowski Sent: Saturday, March 18, 2006 4:45 PM To: CentOS mailing list Subject: Re: [CentOS] multiple signed ssl certificatess on single IP address Due to the SSL specification it is _IMPOSSIBLE_ to have more than one certificate on a given ip:port pair. Why? Because the certificate has to be sent immediately after a connection to the ip:port pair _BEFORE_ the client sends information about _which_ website it intends to contact (thus the server has no way to know which certificate, if many sites are hosted on a given ip:port pair, to supply and must choose ONE). As such virtual nameservers and https are impossible to get working with different certificates. However, there are some solutions: a) get more IP's and host each https site on a different IP b) use different port numbers on the same IP BOTH a and b allow different certificates per site, since they use different host:ip pairs c) use a single wildcard certificate or a certificate for more than one site. Basically a single certificate which is valid for both abc.com and def.com. Searching around on Google should reveal a wiki with more information about how to do this and remain compatible with the major web browsers (I think the link should also be in the CentOS list archives). It should be noted that solution (b) is impractical, many places allow https traffic only on the default https/443 port. Solution (a) is feasible and easy, however requires extra public IPs and will likely increase hosting costs. Solution (c) is the cheapest, however I've yet to try implementing it. [Further note: it is possible to run https over http on port 80 with transparent upgrade, but most web browsers and proxies don't support this and as such this is also not a viable solution...] Cheers, MaZe. On Sat, 18 Mar 2006, Ara Avvali wrote: > Good afternoon everyone, > > This is my first post here. I was wondering if someone could clear my > mind about this. > > I have a dedicated server with a single ip address assigned to it. I > want to host couple of site which are hosted somewhere else and they > have signed certificates. Now I want to host them all on this single > server. > > > > Is it possible to bound more than one cert to a single IP based apache > server and host multiple virtual directories? > > I did a research on line and found couple answers which are all > confusing me. > > > > One suggested that I need to get additional ip's and assign different > sites to it. (Not a very practical solution) > > > > Other one says we can use the same cert and ip but have secondary host > on different port number than default. Something likes > https://www.abc.com <https://www.abc.com/> and https://www.def.com:444 > <https://www.def.com:444/> and so on. But this will cause people a > warning regarding the certificate error on second path, is that correct? > > > > > Some one suggested a wild card certificate but how can I do that since > dedicated server name is a.dedicated.hostingcompany.com and I need to > generate certificates covering *.abc.com and *.def.com > > > > Would someone kindly clear my mind on this issue? > > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Mirror mirror on the wall, who is the best of them all? CentOS
by Collins Richey 18 Mar '06

18 Mar '06

Just to set the record straight. -- Collins Richey If you fill your heart with regrets of yesterday and the worries of tomorrow, you have no today to be thankful for.

2 1

two tier Internet and open source
by ryan 18 Mar '06

18 Mar '06

Does anyone have any links on what Verizon/SBC's plan for a two-tier Internet will do to Open Source projects that need to move around large files?

2 2

Updating kernel and RAID
by Fajar Priyanto 18 Mar '06

18 Mar '06

Hi all, Is there any pitfall when updating kernel with a software RAID-1 configuration? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 23:01:19 up 8:24, 2.6.15-1.1830_FC4 GNU/Linux Let's use OpenOffice. http://www.openoffice.org

3 3

Re: Re: [CentOS] Mirror Mirror on the wall, who is the slowest of them all? CentOS
by edukes＠alltel.net 18 Mar '06

18 Mar '06

Tell us again WHY you use CentOS. Why not one that gives you updates at your speed??? > > From: Jim Smith <jim_smith2006(a)yahoo.com> > Date: 2006/03/18 Sat AM 11:26:44 EST > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] Mirror Mirror on the wall, > who is the slowest of them all? CentOS > > --- Johnny Hughes <mailing-lists(a)hughesjr.com> wrote: > > > Name one distro ... other than Lineox ... that has respun CDs for > > EL4 > > update3 out right now. > > > > Piebox released theirs on March 10th. See distrowatch weekly or > http://www.piebox.com/news.php#2006-03-10 > > Some of you are taking this way too personally, take the truth one > pinch at a time. > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

1 0

Mplayer
by Sam Drinkard 18 Mar '06

18 Mar '06

Looking for the mplayer, and a yum list mplayer returned this: Available Packages mplayer.i386 1.0-0.20.pre7.2.el4.rf dag Will this package work on the x86_64 architecture? Does it need anything else to be functional? The mplayer web page does list availability for the I386 system, and there are a whole bunch of I guess, add-ons, like skins, codecs, & fonts. I would like something simple to install for the few times I would use the player if my windows machine is down. Regards, Sam

1 0

Postfix + MySQL + IMAP + Squirrelmail + Virtual Domains + Web Management.
by Brent DiNicola 18 Mar '06

18 Mar '06

Greetings, I have long read and followed this list. I have also spent a considerable time with our good friend Google. I am a long time Sendmail user, about 15 yrs now. I have recently been looking into the newer services and the Postfix setup seems to be a very nice one. I am migrating a mail server from 3.x to 4.x and was intending on trying out Postfix on the 4.x server. I have found /alot/ of HowTo's covering various Postfix implementations. I have tried a few of these to various stages, some completely, some partially. I have not however found one that would take a CentOS 4.x system from Sendmail to Postfix completely. I can get Postfix to work. I can get MySQL to work with in some cases Cyrus and Courier for the IMAP services. I can get some Virtual Domain working but not completely. I can't however get it to actually work all together. I have a bit of ignorance with Cyrus/Courier IMAP as I have previously just had a simple Squirrelmail to Sendmail with stock IMAP services and all my users previously were real UNIX accounts, which I am trying to not require now. Does anyone have a real HowTO that goes from a stock 4.x load to Postfix etc.? I have follow Hughes HOWTO but it also skips the Courier/Cyrus part. I have gotten it all working except it doesn't make any MailDirs so then Squirrelmail freaks with Invalid Mailbox errors. It's quite frustrating to me because most of the HowTO's skip steps, like getting users into the SQL (which I have figured out a few times). It would be nice to have a real HOWTO that does /all/ the steps from stock to this configuration. If I have missed previously posted good HowTo's please point me to them and I apologize for the oversight. I have done many google/mailing list searches and they all seem to be 'almost' a how to. Thanks for the Help. Brent

5 5

Re: swap_free messages in log
by Jerry Geis 17 Mar '06

17 Mar '06

>Jerry Geis spake the following on 3/17/2006 4:46 AM: >>/ This morning I noticed the following message in my log file. />>>/ swap_free: bad swap file entry 10000000 />>/ swap_free: bad swap file entry 20000000 />>/ swap_free: bad swap file entry 10000000 />>/ swap_free: bad swap file entry 20000000 />>/ a few more times... /.>/ />>/ After rebooting I no longer see it. />>/ I have an intel 865 motherboard, 2.4 celeron, />>/ 2 - 300GIG seagate sata drives as software RAID-1. />>/ />>/ I have had to reboot the machine sometimes />>/ but there were never any messages on the console />>/ or the log files. />>/ />>/ Before my 300GIG drives I used to run 2-120GIG drives />>/ and had the same problem. An occasional reboot fixed it. />>/ I got new drives and I still have some issue? />>/ />>/ Any thoughts on something to try? Thanks. />>/ />>/ Jerry />Is swap mounted on a raid1 device or something else? I had formatted sda2 and sdb2 as swap partitions not part of RAID. This is for centos 4.2 with all latest updates. # This file is edited by fstab-sync - see 'man fstab-sync' for details /dev/md0 / ext3 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 /dev/md1 /home ext3 defaults 1 2 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 LABEL=SWAP-sdb2 swap swap defaults 0 0 LABEL=SWAP-sda2 swap swap defaults 0 0

2 1

Re: [CentOS] Whereis system-config-kickstart
by Robert Moskowitz 17 Mar '06

17 Mar '06

At 10:13 PM 3/16/2006, Jim Perrin wrote: > > To use Kickstart Configurator, you must be running the X Window System. To > > start Kickstart Configurator, select Applications (the main menu on the > > panel) => System Tools => Kickstart, or type the command > > /usr/sbin/system-config-kickstart. > > > > Can't find it. > >It's not installed. > > > So where is it hiding? > >yum install system-config-kickstart got it thanks. Now how do I figure out the packages and applications? Something about the base/comps.xml ? And once I find that on the CD, how to read/interpret it?

4 6

LVM Snapshots -broken ? Ever worked ?
by Bards1888 17 Mar '06

17 Mar '06

I've upgraded my x86_64 4.2 box to the latest kernel 2.6.9.34 and tried an lvm snapshot. It worked fine and I was able to mount the snapshot etc. Now I cannot seem to remove the snapshot. If I try a 'lvremove' it asks if I want to remove the 'active' snapshot, if I say yes it just hangs and the box goes to 99% wait io, however the disk lights do not come on during this. The lvremove process is not straceable so I've got no idea whats going on with it. Luckily I chose to snapshot /tmp so it is not a show stopper. What I did to get around it was to comment out my tmp lv from fstab and just allow /tmp to be part of the root filesystem on the root lv. I deliberately filled up the snapshot so that it was marked inactive but it still thinks it is active when I run the lvremove command again. I also tried to lvremove the tmp lv, not the snapshot, and it said it couldnt remove the lv while there was a snapshot. I found a thread on the forums where Karanbir Singh states that this sort of thing was broken in early 4 series but may work in 4.3. Does anyone know how I can clean this up ? Cheers, Bards.

3 4

swap_free messages in log
by Jerry Geis 17 Mar '06

17 Mar '06

This morning I noticed the following message in my log file. swap_free: bad swap file entry 10000000 swap_free: bad swap file entry 20000000 swap_free: bad swap file entry 10000000 swap_free: bad swap file entry 20000000 a few more times... After rebooting I no longer see it. I have an intel 865 motherboard, 2.4 celeron, 2 - 300GIG seagate sata drives as software RAID-1. I have had to reboot the machine sometimes but there were never any messages on the console or the log files. Before my 300GIG drives I used to run 2-120GIG drives and had the same problem. An occasional reboot fixed it. I got new drives and I still have some issue? Any thoughts on something to try? Thanks. Jerry

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss