- Discuss - lists.centos.org

SunFire X2100 and X4100
by Chris Mauritz 14 Sep '05

14 Sep '05

Anyone seen either of these "in the wild" yet? RHEL3/RHEL4 are install options so I'm assuming CentOS will just work out of the box, but I thought I'd ask here. The 2100 seems like a viable alternative to whitebox 1RU boxes that we currently use, especially with the new dual core processors. Cheers,

4 5

Does Red Hat care about kernel bugs in CentOS?
by Greg Bailey 14 Sep '05

14 Sep '05

In the course of troubleshooting a netfilter problem, I've run into a scenario where I can reliably generate an oops with the netfilter module(s). I generally like perusing the bugs on Red Hat's bugzilla system because I can usually find solutions or patches to issues I encounter there. In this case, I couldn't. What do CentOS users do when they discover bugs? Will Red Hat consider it? Do I file it against "Red Hat Enterprise 3" if I'm running CentOS 3.5? I'm concerned if things like System.map, etc. don't match between the RHEL kernel and the CentOS kernel. Any suggestions? Thanks, Greg

2 1

Netcdf
by Sam Drinkard 14 Sep '05

14 Sep '05

Can anyone tell me if there exists an rpm for netcdf-3.6.0-p1 for Centos x86-64? Also, are there any details of what was used to compile it, i.e., ifort, pgf, g77, etc. I'm looking for a version compiled with ifort... Sam -- Snowman

4 5

RE: [CentOS] kickstart editor
by Ash Christopher 14 Sep '05

14 Sep '05

Add this to your kickstart file. #Disable SELinux (Secure Linux). selinux --disabled -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Jerry Geis Sent: Wednesday, September 14, 2005 2:33 PM To: centos(a)centos.org Subject: [CentOS] kickstart editor Hi, I played with the kickstart configuration editor today. (4.1) I the firewall section I dont see the controls for SELinux? AM I missing something? Where can I control that. I want to disable it in this case. Thanks, Jerry _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

kickstart editor
by Jerry Geis 14 Sep '05

14 Sep '05

Hi, I played with the kickstart configuration editor today. (4.1) I the firewall section I dont see the controls for SELinux? AM I missing something? Where can I control that. I want to disable it in this case. Thanks, Jerry

1 0

4.1 x86_64 and stability
by Ryan Lum 14 Sep '05

14 Sep '05

Dear All, I have previous posted on here before about some of the problems I have been have with various services in 4.1 particularly, PCMCIA, XFS, and Netowrk. I have a nf4x mobo with an amd semprom 3000+. The video card is an Asus radeon x500 (uses the x300 drivers). I have also tried fedora core 4 as well which the same repeatable results. Basically the problem is the services freeze when they start up, but if I removed them from init.d the computer starts fine and they start fine manually. Yet, when I get going I have several various ata errors, and lets not even think about running gnome which just locks up and hangs. My question is: is the hardware support for x86_64 as good as i386. I just installed i386 4.1 without a hang or any problems. thanks

5 6

OT - has my email domain been hijacked?
by kevin.kempter＠dataintellect.com 14 Sep '05

14 Sep '05

Returned mail: User unknown Hi List; I keep getting emails similar to the text below. I/We own the domain dataintellect.com and we have email addresses setup however I always see a bogus dataintellect.com email address as the sender. -or is this simply a random spam email? Thanks in advance for any advice... ========================================= From: Mail Delivery Subsystem <MAILER-DAEMON(a)aol.com> To: carina_x(a)dataintellect.com Date: Today 13:31:26 Spam Status: Spamassassin 0% probability of being spam. Full report: No, score=0.0 required=5.0 tests=AWL,BAYES_50 autolearn=no version=3.0.4 The original message was received at Wed, 14 Sep 2005 15:31:23 -0400 (EDT) from client-201.230.112.161.speedy.net.pe [201.230.112.161] *** ATTENTION *** Your e-mail is being returned to you because there was a problem with its delivery. The address which was undeliverable is listed in the section labeled: "----- The following addresses had permanent fatal errors -----". The reason your mail is being returned to you is listed in the section labeled: "----- Transcript of Session Follows -----". The line beginning with "<<<" describes the specific reason your e-mail could not be delivered. The next line contains a second error message which is a general translation for other e-mail servers. Please direct further questions regarding this message to your e-mail administrator. --AOL Postmaster ----- The following addresses had permanent fatal errors ----- <acardi(a)cs.com> <adorablealicia(a)cs.com> <aclaudet(a)cs.com> <acarter5(a)cs.com> <acrader(a)cs.com> ----- Transcript of session follows ----- ... while talking to air-yg01.mail.aol.com.: >>> RCPT To:<acrader(a)cs.com> <<< 550 MAILBOX NOT FOUND 550 <acrader(a)cs.com>... User unknown >>> RCPT To:<acarter5(a)cs.com> <<< 550 MAILBOX NOT FOUND 550 <acarter5(a)cs.com>... User unknown >>> RCPT To:<aclaudet(a)cs.com> <<< 550 MAILBOX NOT FOUND 550 <aclaudet(a)cs.com>... User unknown >>> RCPT To:<adorablealicia(a)cs.com> <<< 550 MAILBOX NOT FOUND 550 <adorablealicia(a)cs.com>... User unknown >>> RCPT To:<acardi(a)cs.com> <<< 550 MAILBOX NOT FOUND 550 <acardi(a)cs.com>... User unknown unnamed Received: from client-201.230.112.161.speedy.net.pe (client-201.230.112.161.speedy.net.pe [201.230.112.161]) by rly-yg02.mx.aol.com (v107.10) with ESMTP id MAILRELAYINYG23-26f43287a8232f; Wed, 14 Sep 2005 15:31:21 -0400 Received: from mail.strawberrysampler.com ([64.118.71.80]) by 201.230.112.161 with ESMTP id 4868741; Wed, 14 Sep 2005 19:21:59 -0100 Received: (qmail 73986 invoked by uid 5164); Date: Wed, 14 Sep 2005 19:21:59 -0100 Date: Wed, 14 Sep 2005 19:21:59 -0100 Message-ID: <20050914.68664.carina_x(a)dataintellect.com> From: "Men of Focus" <carina_x(a)dataintellect.com> Sender: carina_x(a)dataintellect.com To: acardi(a)cs.com, adorablealicia(a)cs.com, aclaudet(a)cs.com, acarter5(a)cs.com, acrader(a)cs.com X-Responder-ID: 14 Subject: Living without concerns! Content-Type: text/html; charset="UTF-8" X-AOL-IP: 201.230.112.161 X-AOL-SCOLL-SCORE: 1:2:306687321:10737418 X-AOL-SCOLL-URL_COUNT: 3

3 2

errors received in logs
by Steven Vishoot 14 Sep '05

14 Sep '05

now that i am done ranting. i have a question. I received this error today and i think it was today only so far, but the error is as follows. hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04Aborted Command i did some googling and found some stuff...but some said go out and get another drive this one is going to hard drive heaven very soon... and other said it could be a software doing this and keep an eye on it. then i saw some say about a program called smartctl. is this a program that centos has...if not what is it and where is a good place to get it and is it worth running it? i am running centos 3.5 120gig maxtor. with a 1.8 intel cpu 512 mem. Steven "On the side of the software box, in the 'System Requirements' section, it said 'Requires Windows or better'. So I installed Linux."

6 14

Does anyone use VMWare 4.5.2 on CentOS 4?
by Preston Crawford 14 Sep '05

14 Sep '05

I'm trying to use my copy and whenever I reboot I have to reconfigure everything again using vmware-config.pl. Any idea why I might have to do this? Is there something about the way services are setup under CentOS 4 or something? Preston

6 8

RE: [CentOS] X11 forwarding
by Bob Pierce 14 Sep '05

14 Sep '05

I would recommend cygwin/X. I use it almost every day at work through a putty ssh tunnel and I'm very happy with it. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Todd Reed Sent: Wednesday, September 14, 2005 1:11 PM To: CentOS mailing list Subject: RE: [CentOS] X11 forwarding Do I need an xserver running on my windows box? That may be my problem. If so, could someone suggest one. I did a quick search and I found several that you have to pay for. --Todd -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Sean O'Connell Sent: Wednesday, September 14, 2005 1:02 PM To: CentOS mailing list Subject: Re: [CentOS] X11 forwarding On Wed, 2005-09-14 at 12:55 -0500, Todd Reed wrote: > I need to enable forward the xWindows through my SSH session, but I'm > having trouble. I'm using Putty and I've configured it to allow > enable x11 forwarding through the ssh tunnel. I've also edited the > /etc/ssh/sshd_config and set X11Forwarding yes. After doing this, > it's not working. I'm sure there's quite a bit not doing. Could > anybody offer any guidance? This is my first attempt to do this. Todd- What errors are you getting when try to launch an X application? Are you running an X server on your windows machine? Have you restarted sshd since changing sshd_config? -- Sean _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

RE: [CentOS] X11 forwarding
by Todd Reed 14 Sep '05

14 Sep '05

Do I need an xserver running on my windows box? That may be my problem. If so, could someone suggest one. I did a quick search and I found several that you have to pay for. --Todd -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Sean O'Connell Sent: Wednesday, September 14, 2005 1:02 PM To: CentOS mailing list Subject: Re: [CentOS] X11 forwarding On Wed, 2005-09-14 at 12:55 -0500, Todd Reed wrote: > I need to enable forward the xWindows through my SSH session, but I'm > having trouble. I'm using Putty and I've configured it to allow > enable x11 forwarding through the ssh tunnel. I've also edited > the /etc/ssh/sshd_config and set X11Forwarding yes. After doing this, > it's not working. I'm sure there's quite a bit not doing. Could > anybody offer any guidance? This is my first attempt to do this. Todd- What errors are you getting when try to launch an X application? Are you running an X server on your windows machine? Have you restarted sshd since changing sshd_config? -- Sean _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

4 3

X11 forwarding
by Todd Reed 14 Sep '05

14 Sep '05

I need to enable forward the xWindows through my SSH session, but I'm having trouble. I'm using Putty and I've configured it to allow enable x11 forwarding through the ssh tunnel. I've also edited the /etc/ssh/sshd_config and set X11Forwarding yes. After doing this, it's not working. I'm sure there's quite a bit not doing. Could anybody offer any guidance? This is my first attempt to do this. Thanks, Todd

4 3

Tyan Thunder K8SE S2892 lm_sensors Config
by Kirk Bocek 14 Sep '05

14 Sep '05

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His reply was: > It's ok. You know, lm85 and adt7463 are pretty similar. > Sometimes, hardware designer or manufactory guys will use them mixed. So, in Raphael's sensors.conf replace the line 'chip "lm85-i2c-*-2e"' with 'chip "adt7463-i2c-*-2e"' and all will be well. Kirk Bocek

1 0

centos 4 and BlueQuartz 5100R
by Daniel Wright 14 Sep '05

14 Sep '05

Anyone running this? http://bluequartz.org/ . Looking for pros and cons!! Thanks Dan

2 1

mkfs.ext3 on a 9TB volume
by Francois Caen 14 Sep '05

14 Sep '05

Hello, I have: CentOS4.1 x86_64 directly-attached Infortrend 9TB array QLogic HBA seen as sdb GPT label created in parted I want one single 9TB ext3 partition. I am experiencing crazy behavior from mke2fs / mkfs.ext3 (tried both). If I create partitions in parted up to approx 4,100,000 MB in parted, mkfs.ext3 works great. It lists the right number of blocks and creates a filesystem that fills the partition. Any partition approx 4,200,000 MB and larger, mkfs.ext3 sees a totally random number of blocks, equivalent to a few hundred GBs of space. It create healthy partitions, but they are way too small!!! >From dmesg to parted, I can see the system recognizes the hardware properly, including the number of blocks. And I know the upper limit of ext3 is 16TB, not 4! What am I doing wrong? What wall am I hitting around 4TB? HELP!!! Thanks, Francois Caen output of a few commands: (parted) p Disk geometry for /dev/sdb: 0.000-9149550.000 megabytes Disk label type: gpt Minor Start End Filesystem Name Flags 1 0.017 4100000.000 ext3 <------ 4TB partition 2 4100000.000 9149549.983 <------- 5TB partition # mke2fs -n /dev/sdb1 mke2fs 1.35 (28-Feb-2004) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 524812288 inodes, 1049599995 blocks <------------ GOOD!!!! 9530326 blocks (0.91%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 32032 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848, 512000000, 550731776, 644972544 # mke2fs -n /dev/sdb2 mke2fs 1.35 (28-Feb-2004) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 109477888 inodes, 218942971 blocks <-------- BAD!!!!! only 830GB!!! 10947148 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 6682 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848

9 31

CentOS-announce Digest, Vol 7, Issue 10
by centos-announce-request＠centos.org 14 Sep '05

14 Sep '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:396 Important CentOS 4 ia64 xorg-x11 - security update (Pasi Pirhonen) 2. CENTOSPLUS - CESA-2005:768 Critical CentOS 3 s390(x) firefox - security update (Pasi Pirhonen) 3. CESA-2005:396 Important CentOS 4 x86_64 xorg-x11 - security update (Johnny Hughes) 4. CESA-2005:396 Important CentOS 4 i386 xorg-x11 - security update (Johnny Hughes) 5. CESA-2005:396 Important CentOS 4 s390(x) xorg-x11 - security update (Pasi Pirhonen) 6. CESA-2005:329-01: Important CentOS 2 i386 XFree86 security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Tue, 13 Sep 2005 21:53:55 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:396 Important CentOS 4 ia64 xorg-x11 - security update To: centos-announce(a)centos.org Message-ID: <20050913185355.GT15823(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:396 https://rhn.redhat.com/errata/RHSA-2005-396.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/xorg-x11-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-Mesa-libGL-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-Mesa-libGLU-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-Xdmx-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-Xnest-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-Xvfb-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-deprecated-libs-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-deprecated-libs-devel-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-devel-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-doc-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-font-utils-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-libs-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-sdk-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-tools-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-twm-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-xauth-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-xdm-6.8.2-1.EL.13.16.ia64.rpm updates/ia64/RPMS/xorg-x11-xfs-6.8.2-1.EL.13.16.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

D-link dfe-580tx
by Petr Klíma 14 Sep '05

14 Sep '05

Hi does anybody use %SUBJ in Centos 4.0 ? -- Petr Klíma e-mail: qaxi(a)seznam.cz

1 0

slmodem and CentOS 4 (for reference)
by Rodrigo Barbosa 14 Sep '05

14 Sep '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Keywords: slmodem, linmodem, amr, slamr, winmodem Okey, just posting this for future reference, in case someone tries to search the list on this subject. To have slmodemd working on CentOS 4.1 (not sure about ver 4), all that is needed is to edit the file drivers/amrmo_init.c, replacing every instance of KERNEL_VERSION(2,6,10) to KERNEL_VERSION(2,6,9). That will stop with the symbol errors when trying to load slamr.ko. - -- Rodrigo Barbosa <rodrigob(a)suespammers.org> "Quid quid Latine dictum sit, altum viditur" "Be excellent to each other ..." - Bill & Ted (Wyld Stallyns) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) iD8DBQFDJ5ZNpdyWzQ5b5ckRAhXcAKDCbgc6pMLYJWSlEZRjNMM5kIR/xgCcDNIG /00aPqN8xzliIgSJdX/mJQg= =BLZC -----END PGP SIGNATURE-----

1 0

sugarcrm in centos 4
by Mark Quitoriano 14 Sep '05

14 Sep '05

anyone got a howto for this? i can't find one even in there own site -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

4 4

CentOS and OpenICDL
by Sean Wheller 13 Sep '05

13 Sep '05

Hello, Just wanting to introduce the CentOS community to the OpenICDL project in the hope that we may be able to collaborate. OpenICDL is an open source project that aims to develop and maintain a Free/Open Source version of the training materials used to ready students for the International Computer Driving License certification. We are presently developing release 2.0 of the OpenICDL courseware http://icdl.tsf.org.za/devcourseware.html Module 2 is of particular interest to distros and desktops. The first version of module 2 was written for MDK. http://icdl.tsf.org.za/devcourses/mod2/mandrake/module2-all.html Since then we have received a contribution for RedHat/Fedora http://icdl.tsf.org.za/devcourses/mod2/redhat/module2-all.html Another for Ubuntu. If possible, we would like to extend the possibility to every distro to have a version of module 2 that they can call their own. Since the RedHat/Fedora version is nearly finished, the work to derive a CentOS version would not be that large. If you are interested, or have any ideas, I am interested in hearing from you. Please discuss on centos(a)centos.org for now. Thanks, -- Sean Wheller Technical Author sean(a)inwords.co.za 084-854-9408 http://www.inwords.co.za Registered Linux User #375355

1 0

CentOS-4 + 3ware 7810 not quite working
by Jim Bartus 13 Sep '05

13 Sep '05

The module loads and the disks are accessible no problem, but the 3dm monitoring utility runs for about 30 seconds before the processes just disappear. Nothing in messages. I tried updating to the latest firmware but it made no difference. Has anyone gotten the 3dm utility working on centos4? Is this a 2.6 thing? -jim

3 12

Mailinglist moderation
by Dag Wieers 13 Sep '05

13 Sep '05

Hi, I think the time (150 messages and counting) has come to ask someone of the CentOS team to start moderating this list. I don't mind people discussing whatever topic they like, but not at the expense of the mailinglist and its members. I don't think the topic really doesn't matter in these discussions, and if done in private they would stand for long anyway. I would propose someone who has authority of moderating people to send out a warning when a thread has to end (eg. when people start repeating themselves or insults become the main theme) and if necessary temporarily moderate these people/the thread. I think the mere existence of such a moderator could be sufficient to end lasting threads like the previous. Kind regards, -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [all I want is a warm bed and a kind word and unlimited power]

13 21

new dell inspiron 2100 intel 915 mobile chipset
by Jerry Geis 13 Sep '05

13 Sep '05

All. I just got my new 2100 from dell. Nice little box. PLugged my centos 4.1 in and went rather smooth. However, my X windows screen flickers. I noticed it did the vesa driver. SO I went out to intel and downloaded the mobile 915 for linux. Followed the install directions. and it spit a couple errors about not succeeding. Nothing useful in the text. My laptop is still in vesa mode. Has anyone trid to install Centos with the Intel mobile chip 915 or have any suggestions? Thanks, Jerry

1 0

ATI X550 chipset
by Aleksandar Milivojevic 13 Sep '05

13 Sep '05

Hi, I'm about to buy new video card, and was looking at ATI PCI-E Radeon X550. However, I don't see that particular chipset mentioned anywhere in docs. The X300 is there, as well as X600 and X800. Does anybody have Radeon X550 card running under CentOS 4? With 3D acceleration? Thanks, Aleksandar Milivojevic ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 5

Newbie
by Abilash Praveen M 13 Sep '05

13 Sep '05

heya, i'm a newbie to Linux itself and I've chosen CENTOS. It took me around 6 hours to find a CentOS4 cd..lol. I've got my server up and running now (but took me 4 whole days..lol again). Alright, I might need your help... so.. good luck y'all. lata

1 0

Integrating a Raid Driver
by Edward Diener 13 Sep '05

13 Sep '05

It appears that CentOS is having problems with my hard disks, which I have off of an HPT 374 Raid controller but with no Raid stripes created, ie. I am just using it as an IDE controller. There is the latest Linux open source for the HPT 374 on Highpoint's web site, which I have downladed. While I understand 'make' and am a programmer myself, I understand nothing about the Linux kernel or device drivers. My questions are: 1) How can I tell if and what support CentOS 4.1 and the 2.6 kernel has for the HPT 374 ? 2) How do I install the kernel source package and building tools as the instructions tell me to do ? 3) Anybody know what "cross-controller RAID" means ? There is a Make option for turning it on. 4) Once the driver is loaded by using 'insmod', is it automatically loaded each time I boot the system ? 5) Is there a good source, Internet or books, for these questions ? I do not feel great about fiddling with the kernel and drivers but CentOS 4.1 does not work well with my hard disks and I am hoping by updating the system it will again.

1 0

RE: [CentOS] Re: Install Trouble
by Todd Reed 13 Sep '05

13 Sep '05

I actually tried the torrent files very first...faster download! I finally figured it out. I finally tried a new CD drive. It's working. Apparently, the old drive and drive I tried were both bad. It still doesn't make sense that it wouldn't work in the other system. I guess that will be another day, though! Thanks for all that responded. --Todd -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Greg Knaddison Sent: Tuesday, September 13, 2005 12:10 PM To: CentOS mailing list Subject: [CentOS] Re: Install Trouble Can you use bittorrent to download the files? It provides a hash-check of the file as part of the transfer so you can be more certain that the download is correct. The other question is that your burner might be doing something weird. It is certainly very strange that the disks work fine in VMWare, but the rest of the clues point to a bad disk. Regards, Greg _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Install Trouble
by Todd Reed 13 Sep '05

13 Sep '05

I've download the 4 CD ISO images from 3 different mirrors, tried burning the ISO's on different computers, and I still get the same errors. When I go to boot up with the CD1, I eventually get a Call Trace and then a kernel panic: not syncing: fatal exception in interrupt. It points to the CDROM or the CD itself. I can boot up with Knoppix and Mepis fine. The other odd thing is that these same CD's will boot up fine in VM Ware. The last odd thing is that I've got a system running CentOS. For grins and giggles, I booted up with the CD's on it and I got the same error. I do get the very first boot: screen where I hit <enter> after that, it bombs out after it detects and loads some other items. It never gets to the Check Media screen I can't tell if I'm dealing with a hardware problem or if it's a problem with the ISO's. Nothing makes sense! Any help is appreciated.

2 1

Command for physical (hard) disk information
by Truejack 13 Sep '05

13 Sep '05

Hi Folks, How can I get the hard disk information like, its serial number, description ...through a command that like the kind of information we get on Solaris thro' 'iostat -En'. Thanks for any help,

3 2

The role of /.autorelabel
by Todd Cary 13 Sep '05

13 Sep '05

I could not get vsftpd to start; kept getting the "vsftpd Dead Subsys Locked" error. On doing a Google search, I came across a fix (lost the site unfortunately) and as I recall, it has something to do with copying a file and having the incorrect SElinux settings (I have SElinux disabled). The fix was to do a fixfiles, relabel (commands that I have never used) or a touch of "/.autorelabel" and rebooting. It worked, but I have no idea of what I did (my lack of in depth knowledge of Linux). Todd ** -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523

5 5

Re: [CentOS] mkfs.ext3 on a 9TB volume
by Brian T. Brunner 13 Sep '05

13 Sep '05

Agreed: If ANYBODY knows an info-to-man method please post. Second-runner-up: info-to-html would work (html is what info tries to emulate in text-only mode...) Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> wam(a)HiWAAY.net 09/13/05 10:35AM >>> Brian T. Brunner wrote: >Add to your soap-box: the standard 'man' is disregarded, you are left to use (non-standard) info. I have tried to find tools to convert info pages to man, but no luck. I *think* there are tex-to-man tools, but the tex data (from which info documents normally come) isn't always installed .... The combination of man & less is about the best text-based info system I could dream up. Oh well .... -- William A. Mahaffey III --------------------------------------------------------------------- Remember, ignorance is bliss, but willful ignorance is LIBERALISM !!!! ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

1 0

Re: [CentOS] mkfs.ext3 on a 9TB volume
by Brian T. Brunner 13 Sep '05

13 Sep '05

Add to your soap-box: the standard 'man' is disregarded, you are left to use (non-standard) info. There's a man -k call, I haven't found an info -k equivalent. Yes, there's a great calling for thankless man page writing in the *nix world. Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> wam(a)HiWAAY.net 09/13/05 08:24AM >>> Chris Mauritz wrote: <snip> > > Perhaps I'm just extremely lucky, but I've not run into this magic 1TB > barrier that I see bandied about here. Heck, if you're willing to > roll the dice on Hitachi drives, you can get a terabyte these days > with just 2 hard disks in the array with RAID0 or 3 disks with RAID5. > Unfortunately, a lot of the documentation and FAQs are quite out of > date which can lead to some confusion. Grrrrrrrrrrr, 1 of my *long time* complaints w/ Linux (any Linux, apparently) is that nobody bothers to keep man-pages/FAQS/other-documentation up to date. The cron(8) on my SuSE 9.2 P4 is dated 1996 (!!!). I lay this at the feet of the distro folks myself, but none of them have taken it up :-) .... -- William A. Mahaffey III --------------------------------------------------------------------- Remember, ignorance is bliss, but willful ignorance is LIBERALISM !!!! _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

2 1

New to the list and one quick question
by cajun 13 Sep '05

13 Sep '05

Hi all, Let me start off with a little back ground. I am running right now RH9 fully updated on a Dell PowerEdge 1600SC with 512megs of Ram, 18G SCSI HD. I run this at home so this is no critical server, unless you ask my girls when I have it down, I have been debating on upgrading to Fedora until I started looking at CentOS. I have download the ISO and burned them with X-CD-Roast. Here is my question: I tried running the mediacheck on the cd's and it would lock up right before the media check screen appears. I have googled and tried the ide=nodma and other options, but to still no avial. I also ran memtest86, now here is where the kicker is. It did show there was some errors, and these I will check out. But I then got a wild idea and pulled out my 1st CD of RH9, dropped it into the CD drive and at the boot prompt ran media check. RH9 disk 1 checked out fine, so I dropped in the CentOS disk 1 and ran it. It checked out fine and so did all the rest of them. Is this a vaild test?? Or am I just blowing in the wind here?? Thanks for any input into this matter!! Lee Perez Still learning!!!

5 8

OT: setting up a bridge
by carlopmart＠gmail.com 13 Sep '05

13 Sep '05

hi all, I am using centos3.5 for my firewall home. I would like to do some tests with bridge firewalling. When i try to create the bridge, brctl givtes me this error: br_add_bridge: Package not installed. i find some answers about this error, but the most important is the one that says driver is not loaded into kernel. In my /boot/config-2.4.21-32.0.1.EL file appears compiled as a module, but how can i load it with modprobe?? .... :(( Thanky you -- CL Martinez carlopmart {at} gmail {d0t} com

3 3

OT: ProFTPD web browser login
by Ed Morrison 13 Sep '05

13 Sep '05

I'm setting up a ftp server. I need to be able to have people have a non interactive login through a web browser into a chrooted directory i.e. ftp://somewhere.com. I also need to have a URL that will auto login a user to a chrooted directory. These chrooted directories will be RO for all anonymous access. That said I also need to have a staff account that has upload rights to these directories. Before I was able to use with Windowz FTP servers: ftp://user:password@somewhere.com. This does not pass with proftpd or vsftpd. Are there conf entries that will allow these? I know there are security risks associated with this but it is an environment I have to deal with anyway. Conf file: # This is the ProFTPD configuration file # $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $ ServerName "ProFTPD server" ServerIdent on "FTP Server ready." ServerAdmin root@localhost ServerType standalone DefaultServer on AccessGrantMsg "User %u logged in." DeferWelcome off DefaultRoot ~ !adm AuthPAMAuthoritative on IdentLookups off UseReverseDNS off Port 21 Umask 022 ListOptions "-a" AllowRetrieveRestart on AllowStoreRestart on MaxInstances 20 User nobody Group nobody ScoreboardFile /var/run/proftpd.score <Global> AllowOverwrite yes <Limit ALL SITE_CHMOD> AllowAll </Limit> </Global> LogFormat default "%h %l %u %t \"%r\" %s %b" LogFormat auth "%v [%P] %h %t \"%r\" %s" <Anonymous ~ftp> <Limit LOGIN> AllowAll </Limit> User ftp Group ftp AccessGrantMsg "Anonymous login ok, restrictions apply." UserAlias anonymous ftp DefaultChdir /pub <Limit WRITE SITE_CHMOD> DenyAll </Limit> <Limit STOR> DenyAll </Limit> <Limit READ> AllowAll </Limit> </Anonymous> Thanks, Ed

2 2

S-ata controller
by Admin 13 Sep '05

13 Sep '05

Hi List I have a problem with 2 drivers 1. Intel 1000 GT dosen't work correctly 2 Promise SATA 300 TX2 plus/TX4 dosen't work This is not a RAID card, just an S-ata controller for a new s-ata Hitachi 500 Gb drive I have tried CentOS-4.1 kernel, but sadly nothing Any clues anyone? Cheers Jan Erik

1 0

Does a list of compatible motherboards
by Todd Cary 13 Sep '05

13 Sep '05

Is there a list of compatible motherboards? My Abit BE7 is not compatible with either Centos 4.1 or Fedora 3; just RH 9. Any suggestions are welcomed.... Todd -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523

3 7

hourly log
by Robert 13 Sep '05

13 Sep '05

greetings on a simple CentOS 4 DNS server install i have the below info. crontab -l "shows nothing" pico /etc/crontab shows... SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ # run-parts 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly i have searched and looked and fiddled yet... ummm dunno... ...and i have nothing in /etc/cron.hourly or /etc/cron.d among other places yet ever hour my logfile gets touched so to speak with this stuff and i have virtually every daemon shutoff so i am trying to figure out what it is that is doing this and would sincerely appreciate any help. what did i space or forget please? Sep 11 05:01:01 ns1 crond(pam_unix)[27023]: session opened for user root by (uid=0) Sep 11 05:01:01 ns1 crond(pam_unix)[27023]: session closed for user root Sep 11 06:01:01 ns1 crond(pam_unix)[27027]: session opened for user root by (uid=0) Sep 11 06:01:01 ns1 crond(pam_unix)[27027]: session closed for user root Sep 11 07:01:01 ns1 crond(pam_unix)[27031]: session opened for user root by (uid=0) Sep 11 07:01:01 ns1 crond(pam_unix)[27031]: session closed for user root Sep 11 08:01:01 ns1 crond(pam_unix)[27035]: session opened for user root by (uid=0) Sep 11 08:01:01 ns1 crond(pam_unix)[27035]: session closed for user root im sure i am missing something really simple. tia and regards, - rh -- Robert - Abba Communications Computers & Internet Sales/Service www.abbacomm.net

2 1

Rpms for Teamspeak
by denis＠croombs.org 13 Sep '05

13 Sep '05

Any clues where I can find rpms for this (on Centos 4.x), I have tried a number of different site with no luck. Many thanks Denis

3 2

Boot process slow with rhgb quiet on
by Dave Gutteridge 12 Sep '05

12 Sep '05

If I boot with "rhgb quiet" off, my computer boots in 1 minute and 30 seconds. If I boot with "rhgb quiet" on, my computer boots in 3m11s. That's a long time to wait. Significantly, when booting with "rhgb quiet", right at the moment X takes over, there is a 1m36s pause where the screen is blank except for the hourglass cursor turning around and around. Of course, if my main priority was to simply boot quickly, I would simply remove the "rhgb quiet" option from the boot process. And I'm not opposed to doing that. However, this pause only started happening recently, so I wonder why it exists at all. When booting with "rhgb quiet" off, I tried to look for any errors or indications of a problem, but it seemed to boot mostly without pause or error. There was one message which was like an error warning, which said something about a "microcode device doesn't exist?". But text was moving across the screen quickly and I couldn't write down exactly what it said. Before I give in and remove the "rhgb quiet" option permanently, is there any way I might be able to diagnose and fix this delay problem? I'd rather be telling the computer how to boot, instead of it telling me. Dave

2 1

Hard drive DMA messages upon shutdown
by Edward Diener 12 Sep '05

12 Sep '05

I have 4 hard drives on my system. CentOS is in a logical partition on the first hard drive and there is a swap partition in a logical partition on the first hard drive which I have also told it to use. The other three hard drives contain various partitions, all of which I have hidden from CentOS which are primary partitions. I have as well hidden the primary partitions on the first hard drive also. While there are other Linux parttions I do not want CentOS to use them in any way right now. Yet when I restart or shutdown CentOS I get messages saying that there are DMA errors waiting for some hard disk event on another hard dribe before the OS eventually reboots or shuts down my system. I have checked the mount and nothing but the two partitions with which I have set up to run CentOS are mounted. Why then is CentOS trying to access other hard drives upon shutdown ? Is there some way that I can curtail the OS from doing so ?

1 0

Re: [CentOS] x86_64 Question (Solved)
by Brian T. Brunner 12 Sep '05

12 Sep '05

Hmmm... Looking at drivers/human.c starting at line 666 if (human.state_test(ALIVE)) then if (eval_actions(DUMB)) dumber(); else human.state_set(DEAD); Get used to it. Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> ethericalzen(a)gmail.com 09/12/05 03:06PM >>> Ignacio Vazquez-Abrams wrote: > On Mon, 2005-09-12 at 12:05 -0500, Alex White wrote: > >>Is there some linkage anyone can pass to me that tells me (not >>necessarily step by step) what options to pass to rpmbuild if I want >>to build a 32-bit app on the athlon64? > > > setarch i386 rpmbuild ... Well then, that was stupid of me. Told you it my dumb question of the year. I will refrain from stupidity for the rest of the year thank you very much. Sincerely, Alex White _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

1 0

php 5.0.5
by Bob Pierce 12 Sep '05

12 Sep '05

I see php 5.0.5 has been released. Are there plans to include this update in the centosplus repo for Centos4? Bob Pierce Systems Analyst Westman Communications Group pierceb(a)westmancom.com

2 1

Failing "yum --installroot=/mnt groupinstall base"
by Jesse Waters 12 Sep '05

12 Sep '05

Hello all, trying to do the below command. yum --installroot=/mnt groupinstall base i receive this error message. "You have enabled checking of packages via GPG keys. This is a good thing. However, you do not have any GPG public keys installed. You need to download the keys for packages you wish to install and install them. You can do that by running the command: rpm --import public.gpg.key" I have already imported the gpg keys in: /usr/share/rhn/RPM-GPG* /usr/share/doc/centos-release-4/RPM-GPG* I can yum install <package> without issue but when I try the groupinstall option it fails any suggestions? Regards, Jesse Waters

2 2

x86_64 Question
by Alex White 12 Sep '05

12 Sep '05

Hello All, It's time for my stupid question of the year. I just swapped over to an Athlon64 proc. I went to compile a src rpm and it bombs out. Now, rather than have anyone troubleshoot this and add noise to the list, I'm fairly certain what it's been answered before by someone. I tried google and never did see a true answer. what I do see is stuff about mozilla mostly and associated plugins. This isn't solving my problem. Is there some linkage anyone can pass to me that tells me (not necessarily step by step) what options to pass to rpmbuild if I want to build a 32-bit app on the athlon64? I assumed it was --target i686 or somethin' similar but all of the options I've tried with target result in the same failure. Namely: checking for C compiler default output... configure: error: C compiler cannot create executables Or I get the following when passing no options to rpmbuild at all other than building the binary: Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized I've already managed to build gaim 1.5.0 (as a test) and it builds and installs fine. So I'm confuzzled. I'm sure it's something hugenormously ignorant and dumb on my part. Englighten me please. CentOS-4 (current on all updates) Sincerely, Alex White

2 2

snmp interface values on x86_64?
by Les Mikesell 12 Sep '05

12 Sep '05

I'm trying to graph the interface traffic from centos 3.5 x86_64 boxes using snmp and cacti (running on an x86 box). Everything starts out OK after a reboot, but it looks like after the total traffic out passes 2^32 bytes the values returned in snmp 5-minute rates go crazy. Is this a known bug, and if not, where should it be reported? -- Les Mikesell lesmikesell(a)gmail.com

1 0

One day left to vote for CentOS
by lance＠uklinux.net 12 Sep '05

12 Sep '05

CentOS has been nominated for an award in the Linux User awards. Please vote for CentOS !! Voting finishes tomorrow - 13th September. Please vote at :- http://www.linuxawards.co.uk/index.php You will need to vote for all categories otherwise the vote wont count. Thanks Lance -- uklinux.net - The ISP of choice for the discerning Linux user.

2 1

Re: [Cantos] Boot process slow with RGB quiet on
by Brian T. Brunner 12 Sep '05

12 Sep '05

[quote]"microcode device doesn't exist?"[/quote] Try grepping for 'microcode' in /var/log/messages, try dmesg | grep microcode, either or both may give you the exact text. chkconfig --list | grep microcode may also give you a hit, if yes, the problem is easy to cure: turn off the service (man chkconfig). If these don't give hits, then it's time to build a kernel for your hardware and desires, switching 'microcode' stuff off. Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> dave(a)tokyocomedy.com 09/12/05 09:31AM >>> If I boot with "rhgb quiet" off, my computer boots in 1 minute and 30 seconds. If I boot with "rhgb quiet" on, my computer boots in 3m11s. That's a long time to wait. Significantly, when booting with "rhgb quiet", right at the moment X takes over, there is a 1m36s pause where the screen is blank except for the hourglass cursor turning around and around. Of course, if my main priority was to simply boot quickly, I would simply remove the "rhgb quiet" option from the boot process. And I'm not opposed to doing that. However, this pause only started happening recently, so I wonder why it exists at all. When booting with "rhgb quiet" off, I tried to look for any errors or indications of a problem, but it seemed to boot mostly without pause or error. There was one message which was like an error warning, which said something about a "microcode device doesn't exist?". But text was moving across the screen quickly and I couldn't write down exactly what it said. Before I give in and remove the "rhgb quiet" option permanently, is there any way I might be able to diagnose and fix this delay problem? I'd rather be telling the computer how to boot, instead of it telling me. Dave _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

3 2

CentOS-announce Digest, Vol 7, Issue 9
by centos-announce-request＠centos.org 12 Sep '05

12 Sep '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:769-01: Critical CentOS 2 i386 mozilla security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 12 Sep 2005 09:22:26 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:769-01: Critical CentOS 2 i386 mozilla security update To: centos-announce(a)centos.org Message-ID: <4324BC32.1060601(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:769-01 Critical: mozilla security update Files available: mozilla-1.7.10-1.1.2.2.i386.rpm mozilla-chat-1.7.10-1.1.2.2.i386.rpm mozilla-devel-1.7.10-1.1.2.2.i386.rpm mozilla-dom-inspector-1.7.10-1.1.2.2.i386.rpm mozilla-js-debugger-1.7.10-1.1.2.2.i386.rpm mozilla-mail-1.7.10-1.1.2.2.i386.rpm mozilla-nspr-1.7.10-1.1.2.2.i386.rpm mozilla-nspr-devel-1.7.10-1.1.2.2.i386.rpm mozilla-nss-1.7.10-1.1.2.2.i386.rpm mozilla-nss-devel-1.7.10-1.1.2.2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 7, Issue 9 *********************************************

1 0

CentOS-announce Digest, Vol 7, Issue 8
by centos-announce-request＠centos.org 12 Sep '05

12 Sep '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:769 Critical CentOS 4 i386 mozilla - security update (Johnny Hughes) 2. CESA-2005:769 Critical CentOS 4 x86_64 mozilla - security update (Johnny Hughes) 3. CESA-2005:768 Critical CentOS 4 i386 firefox - security update (Johnny Hughes) 4. CESA-2005:768 Critical CentOS 4 x86_64 firefox - security update (Johnny Hughes) 5. CESA-2005:768 Critical CentOS 4 s390(x) firefox - security update (Pasi Pirhonen) 6. CESA-2005:769 Critical CentOS 3 s390(x) mozilla - security update (Pasi Pirhonen) 7. CESA-2005:769 Critical CentOS 3 i386 mozilla - security update (Tru Huynh) 8. CESA-2005:768 Critical CentOS 3 i386 firefox - security update (CENTOSPLUS only) (Tru Huynh) 9. CESA-2005:769 Critical CentOS 3 x86_64 mozilla - security update (Tru Huynh) 10. CESA-2005:768 Critical CentOS 3 x86_64 firefox - security update (CENTOSPLUS only) (Tru Huynh) 11. CESA-2005:769 Critical CentOS 4 s390(x) mozilla - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 10 Sep 2005 09:04:06 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2005:769 Critical CentOS 4 i386 mozilla - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1126361046.3560.9.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:769 https://rhn.redhat.com/errata/RHSA-2005-769.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: mozilla-1.7.10-1.4.2.centos4.i386.rpm mozilla-chat-1.7.10-1.4.2.centos4.i386.rpm mozilla-devel-1.7.10-1.4.2.centos4.i386.rpm mozilla-dom-inspector-1.7.10-1.4.2.centos4.i386.rpm mozilla-js-debugger-1.7.10-1.4.2.centos4.i386.rpm mozilla-mail-1.7.10-1.4.2.centos4.i386.rpm mozilla-nspr-1.7.10-1.4.2.centos4.i386.rpm mozilla-nspr-devel-1.7.10-1.4.2.centos4.i386.rpm mozilla-nss-1.7.10-1.4.2.centos4.i386.rpm mozilla-nss-devel-1.7.10-1.4.2.centos4.i386.rpm src: mozilla-1.7.10-1.4.2.centos4.src.rpm

7 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss