- Discuss - lists.centos.org

CentOS-announce Digest, Vol 6, Issue 6
by centos-announce-request＠centos.org 11 Aug '05

11 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:627 Critical CentOS 3 ia64 gaim - security update (Pasi Pirhonen) 2. CESA-2005:627 Critical CentOS 4 ia64 gaim - security update (Pasi Pirhonen) 3. CESA-2005:627 Critical CentOS 4 s390(x) gaim - security update (Pasi Pirhonen) 4. CESA-2005:627 Critical CentOS 3 s390(x) gaim - security update (Pasi Pirhonen) 5. CESA-2005:687 Moderate CentOS 3 ia64 ethereal - security update (Pasi Pirhonen) 6. CESA-2005:687 Moderate CentOS 4 ia64 ethereal - security update (Pasi Pirhonen) 7. CESA-2005:708 Moderate CentOS 4 ia64 gpdf - security update (Pasi Pirhonen) 8. CESA-2005:708 Moderate CentOS 4 s390(x) gpdf - security update (Pasi Pirhonen) 9. CESA-2005:687 Moderate CentOS 4 x86_64 ethereal - security update (Johnny Hughes) 10. CESA-2005:687 Moderate CentOS 4 i386 ethereal - security update (Johnny Hughes) 11. CESA-2005:708 Moderate CentOS 4 x86_64 gpdf - security update (Johnny Hughes) 12. CESA-2005:708 Moderate CentOS 4 i386 gpdf - security update (Johnny Hughes) 13. CESA-2005:687-01: Moderate CentOS 2 i386 ethereal security update (John Newbigin) 14. CESA-2005:687 Moderate CentOS 3 x86_64 ethereal security update (seth vidal) 15. CESA-2005:687 Moderate CentOS 3 i386 ethereal security update (seth vidal) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Aug 2005 17:14:23 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:627 Critical CentOS 3 ia64 gaim - security update To: centos-announce(a)centos.org Message-ID: <20050810141423.GB22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:627 https://rhn.redhat.com/errata/RHSA-2005-627.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/gaim-1.3.1-0.el3.3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

CentOS news groups?
by Petr Klíma 11 Aug '05

11 Aug '05

Hi Are there any CentOS news groups with the same content as this mailing list? Petr Klíma e-mail: qaxi(a)seznam.cz

2 1

CentOS news groups?
by Petr Klíma 11 Aug '05

11 Aug '05

Hi Are there any CentOS news groups with the same content as this mailing list? Petr Klíma e-mail: qaxi(a)seznam.cz

1 0

CentOS 4 HTTPD strange dependencies problem
by Petr Klíma 11 Aug '05

11 Aug '05

Hello i found a problem with dependencies in Centos 4 What I did: I installed CentOS from my >>> 4.0 <<< CD media with httpd server. this are installed versions: httpd-2.0.52-9.ent.centos4.1.i386.rpm and one of its dependecy apr-0.9.4-24.1.i386.rpm then I tried make update "yum update" and I get ... ... ... --> Running transaction check --> Processing Dependency: apr >= 0.9.4-24.2 for package: httpd --> Finished Dependency Resolution Error: Missing Dependency: apr >= 0.9.4-24.2 is needed by package httpd I discovered that this RPM in centos/4/updates/i386/RPMS/ httpd-2.0.52-12.1.ent.centos4.i386.rpm depends on apr-0.9.4-24.2 but apr-0.9.4-24.2 is not in updates directory ... there is apr-0.9.4-24.3.i386.rpm in centos/4/os/i386/CentOS/RPMS/ which is in Centos 4.1 But my system is 4.0 and it never even listen about apr-0.9.4-24.3. My yum knows only update directory centos/4/updates/i386/RPMS/ and its CD media. Did I something wrong? Petr Klíma e-mail: qaxi(a)seznam.cz

6 10

Setting X in 1024x768 60 hz refresh for LCD TV viewing
by Jerry Geis 10 Aug '05

10 Aug '05

I am trying to hook up linux to an LCD 1333x768 LCD TV. XP in 1024x768 show up just fine. X does not. I have set the screen preferences to 1024x768. I have edited the xorf.conf file instead of have a range from 50 - 70 I change it to be only 60. I start X and it still comes up on my A70F monitor but still will not show on my LCD TV. xvidtune does not run on this PC. It says something about "video modes are not tunable on this chip". My PC at this time is a dell SC420. Thanks for any input as to get the display working on the LCD TV under linux.

2 1

MailScanner and SpamAssassin
by James B. Byrne 10 Aug '05

10 Aug '05

I acknowledge beforehand that this list is not the primary place to discuss these specific applications, but I am pressed for time and many of you have a great deal of experience with these two products. We have MailScanner configured to use SpamAssassin and it works exactly as we wanted. Up until now. I now need to allow messages classified as spam to be delivered to a single mailbox. I tried to do this by configuring an allowed address in SpamAssassin via the webmin interface and restarting the MailScanner service (even though as spamd is not running this should not matter). This change has not been effected. Test messages containing spam are still being trapped by MailScanner and discarded. I do not wish to change the entire system settings to allow one address (the abuse reporting address) to get this type of mail. How do I accomplish this within MailScanner. Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

1 0

compiling rpms
by Mark Quitoriano 10 Aug '05

10 Aug '05

Hi! i compiled rpms like postfix with mysql support. My problem is when i compile programs i can't distinguish the difference between postfix w/o mysql and postfix w/ mysql because they have the same filename(postfix-2.x.x.i386.rpm), what i like to happen is when i compile postfix w/ mysql support it will show something like postfix-mysql-2.x.x.i386.rpm. so when i install and try to query it, it will show postfix-mysql-2.x.x not just postfix-2.x.x. what file should i edit to make this happen? TIA -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

6 15

Making Driver Disks
by William 10 Aug '05

10 Aug '05

List, I have attempted to make my own megaraid driver disk for a Dell PowerEdge 2300. The procedure I'm using is detailed at the end of this message. In short, I followed samples that I collected after Googling around. The problem I face is that the CentOS 4 installer can't seem to mount the driver disk after I have created it. It gives no information other than, "Cannot mount /dev/fd0", so I don't know where to look to troubleshoot this. If there is a documented procedure for creating good driver disks for CentOS 4, I would very much like to read them; I simply haven't been able to find any, yet. Otherwise, please review the procedure I have detailed in this message to spot the flaw. Thanks!! The procedure I have used to create this driver disk is as follows: ## Log into a machine that is running the 2.6.9-11.EL kernel (e.g.: a working CentOS 4 box). # yum install kernel-devel ## Download the megaraid source from the ALMOST useful (doesn't work because we can't seem to Alt+F2 to get to a bash shell, as described): http://www.tuxyturvy.com/blog/index.php?/archives/4-Installing-RHEL4-on-Sys… # cd /usr/src # wget http://www.tuxyturvy.com/files/megaraid.tar.bz2 # mkdir /usr/src/megaraid # mkdir /usr/src/megaraid/dd # mkdir /usr/src/megaraid/dd/modules # mkdir /usr/src/megaraid/dd/modules/2.6.9-11.EL # mkdir /usr/src/megaraid/dd/modules/2.6.9-11.ELhugemem # mkdir /usr/src/megaraid/dd/modules/2.6.9-11.ELsmp # cd /usr/src/megaraid # tar jxvfp /usr/src/megaraid.tar.bz2 ## Ignore all warnings. # make -C /lib/modules/2.6.9-11.EL/build SUBDIRS=/usr/src/megaraid modules # cp megaraid.o dd/modules/2.6.9-11.EL/ # rm -f *.o *.ko ## Ignore all warnings. # make -C /lib/modules/2.6.9-11.ELhugemem/build SUBDIRS=/usr/src/megaraid modules # cp megaraid.o dd/modules/2.6.9-11.ELhugemem/ # rm -f *.o *.ko ## Ignore all warnings. # make -C /lib/modules/2.6.9-11.ELsmp/build SUBDIRS=/usr/src/megaraid modules # cp megaraid.o dd/modules/2.6.9-11.ELsmp/ # rm -f *.o *.ko # cd dd/modules/ # find . -type f | cpio -o -H crc | gzip -n9 > ../modules.cgz # cd .. # rm -rf modules/ # echo "LSI MegaRAID driver disk for CentOS 4.0" > centos-4 # vim modinfo ---- add ---- Version 0 megaraid scsi "LSI MegaRAID for Legacy Dell PowerEdge Servers" ------------- # vim pcitable ---- add ---- 0x101e 0x1960 "megaraid" "AMI|MegaRAID (OEM)" 0x101e 0x9010 "megaraid" "AMI|MegaRAID" 0x101e 0x9060 "megaraid" "AMI|MegaRAID" 0x8086 0x1960 "megaraid" "AMI|Megaraid" ------------- # touch modules.dep # chmod 0755 * ## Insert a floppy disk into your floppy disk drive. # fdformat -n /dev/fd0u1440 # mkfs -t ext3 /dev/fd0u1440 # mount /dev/fd0u1440 /media/floppy # rm -rf /media/floppy/* # cp * /media/floppy/ # umount /media/floppy ## Done making the Driver Disk. ## Insert disk 1 of the CentOS 4 install set into your Dell PowerEdge box and reboot the machine. ## At the CentOS 4 install prompt, insert the Driver Disk into the machine and type: > linux dd ## Error: Cannot mount /dev/fd0 ?!

4 9

additional boot options with older Compaq 1850R and DL360 and DL380 units
by Robert Hanson 10 Aug '05

10 Aug '05

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc. may i ask what others are putting in their "additional boot options" so that the units can he remotely shutdown to power off and/or rebooted without hanging please? also, any _extra_ tips and tricks are certainly welcome. again, i am grateful to those people that have been helping me off-list as well! take care and kind regards, -- Robert Hanson Abba Communications http://www.abbacomm.net

3 3

CentOS-announce Digest, Vol 6, Issue 5
by centos-announce-request＠centos.org 10 Aug '05

10 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:706 Important CentOS 4 ia64 cups - security update (Pasi Pirhonen) 2. CESA-2005:706 Important CentOS 3 ia64 cups - security update (Pasi Pirhonen) 3. CESA-2005:671 Moderate CentOS 4 ia64 kdegraphics - security update (Pasi Pirhonen) 4. CESA-2005:670 Moderate CentOS 4 ia64 xpdf - security update (Pasi Pirhonen) 5. CESA-2005:598 Low CentOS 4 ia64 sysreport - security update (Pasi Pirhonen) 6. CESA-2005:706 Important CentOS 3 s390(x) cups - security update (Pasi Pirhonen) 7. CESA-2005:706 Important CentOS 4 s390(x) cups - security update (Pasi Pirhonen) 8. CESA-2005:706 Important CentOS 3 s390(x) cups - security update (Pasi Pirhonen) 9. CESA-2005:598 Low CentOS 3 s390(x) sysreport - security update (Pasi Pirhonen) 10. CESA-2005:670 Moderate CentOS 4 s390(x) xpdf - security update (Pasi Pirhonen) 11. CESA-2005:598 Low CentOS 4 s390(x) sysreport - security update (Pasi Pirhonen) 12. CESA-2005:598-01: Low CentOS 2 i386 sysreport security update (John Newbigin) 13. CESA-2005:720-01: Low CentOS 2 i386 ucd-snmp security update (John Newbigin) 14. CESA-2005:671 Moderate CentOS 4 ia64 kdegraphics - security update (Pasi Pirhonen) 15. CESA-2005:589-01: Critical CentOS 2 i386 gaim security update (John Newbigin) 16. CESA-2005:595 Moderate CentOS 3 i386 SquirrelMail - security update (seth vidal) 17. CESA-2005:595 Moderate CentOS 3 x86_64 SquirrelMail - security update (seth vidal) 18. CESA-2005:598 Low CentOS 3 i386 SquirrelMail - security update (seth vidal) 19. CESA-2005:598 Low CentOS 3 x86_64 sysreport - security update (seth vidal) 20. CESA-2005:627 Critical CentOS 3 x86_64 gaim - security update (seth vidal) 21. CESA-2005:627 Critical CentOS 3 i386 gaim - security update (seth vidal) 22. CESA-2005:706 Important CentOS 3 i386 cups - security update (seth vidal) 23. CESA-2005:706 Important CentOS 3 x86_64 cups - security update (seth vidal) 24. CESA-2005:706 Important CentOS 4 x86_64 cups - security update (Johnny Hughes) 25. CESA-2005:706 Important CentOS 4 i386 cups - security update (Johnny Hughes) 26. CESA-2005:671 Moderate CentOS 4 i386 kdegraphics - security update (Johnny Hughes) 27. CESA-2005:671 Moderate CentOS 4 x86_64 kdegraphics - security update (Johnny Hughes) 28. CESA-2005:670 Moderate CentOS 4 i386 xpdf - security update (Johnny Hughes) 29. CESA-2005:670 Moderate CentOS 4 x86_64 xpdf - security update (Johnny Hughes) 30. CESA-2005:598 Low CentOS 4 x86_64 sysreport - security update (Johnny Hughes) 31. CESA-2005:598 Low CentOS 4 i386 sysreport - security update (Johnny Hughes) 32. CESA-2005:627 Critical CentOS 4 x86_64 gaim - security update (Johnny Hughes) 33. CESA-2005:627 Critical CentOS 4 i386 gaim - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 9 Aug 2005 20:51:43 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:706 Important CentOS 4 ia64 cups - security update To: centos-announce(a)centos.org Message-ID: <20050809175143.GJ31284(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:706 https://rhn.redhat.com/errata/RHSA-2005-706.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/cups-1.1.22-0.rc1.9.7.ia64.rpm updates/ia64/RPMS/cups-devel-1.1.22-0.rc1.9.7.ia64.rpm updates/ia64/RPMS/cups-libs-1.1.22-0.rc1.9.7.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

RE: [CentOS] OCI8 extension for PHP
by Dan Elliott 10 Aug '05

10 Aug '05

http://www.oracle.com/technology/pub/articles/deployphp/index.html -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Joacim Ekroth Sent: Wednesday, August 10, 2005 5:02 AM To: CentOS mailing list Subject: Re: [CentOS] OCI8 extension for PHP Reuben D. Budiardja wrote: > Hello, > I am wondering what do people use to connect to an oracle DB ? > I've been looking for something like php-oci8 RPM package, but no luck so far. > I hate to have to rebuilding PHP on my own just to be able to connect > to an Oracle database. > > Thanks for any help > RDB > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > Reuben, AFAIK there is no pre-made packages for this. You have to do it yourself. You first need to install the Oracle Client package, and then recompile php together with the Oracle libs ( --with-oci8 ) HTH Joacim _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

OCI8 extension for PHP
by Reuben D. Budiardja 10 Aug '05

10 Aug '05

Hello, I am wondering what do people use to connect to an oracle DB ? I've been looking for something like php-oci8 RPM package, but no luck so far. I hate to have to rebuilding PHP on my own just to be able to connect to an Oracle database. Thanks for any help RDB

2 1

Installing CentOS 4.1 on IA64
by Yeo Chang Lim 09 Aug '05

09 Aug '05

Hi, I am trying to install Centos 4.1 on IA64 machine. However, during loading of vmlinuz and initrd.img , i will get a kernel panic. Does anyone has this problem? I think it's due to initrd.img

5 4

Upgrading Drive, Best Practice?
by Ajay Sharma 09 Aug '05

09 Aug '05

Hi, This might sound like a n00b question, but I've honestly never done this with a Linux machine... (it is running Centos3) We have a 1U mail server with two 36GB SCSI drives in a hardware mirror config. There's no more room for any other drives in the case. It's filling up, so we now have two 74GB drives ready to take their place. Possible solutions that I've come up with: 1) shutdown all the services (postfix, courier, etc.) backup the machine to another box, swap out the drives, install CentOS4, copy the email back. It's a pain, but I'd get a clean CentOS4 box when I'm done. whee! 2) bootup with a bootdisk and use some kinda drive image utility to backup the machine (partimage, g4u, etc), swap out the drives, and then restore the image. Less painful, but still running CentOS3 and I have to fumble around with those image utilities instead of good ol' tar-over-ssh. :) any others? In the past I've usually just moved services from an old machine to another one. So I had tons of time to configure/test the new server before making it live. This one has to be done in place so time is of the essence. How would you do it? Thanks, Ajay

3 2

Installing a theme in KDE
by Dave Gutteridge 09 Aug '05

09 Aug '05

I went to kde-looks.org and downloaded a theme: http://kdelook.org/content/show.php?content=10919 When I ran the configure command, it went ok: [root@localhost thinkeramik-3.2.1]# ./configure --prefix="`kde-config --prefix`" ... Good - your configure finished. Start make now However, when I run make, I get a whole slew of errors, that look like this: t::minimumSize() const': thinkeramik.cpp:1852: error: `widget' undeclared (first use this function) thinkeramik.cpp: In member function `virtual bool ThinKeramik::ThinKeramikClient::eventFilter(QObject*, QEvent*)': thinkeramik.cpp:1858: error: `widget' undeclared (first use this function) thinkeramik.cpp:1876: error: `processMousePressEvent' undeclared (first use this function) thinkeramik.cpp: At global scope: thinkeramik.cpp:1894: error: expected constructor, destructor, or type conversion before '*' token thinkeramik.cpp:1894: error: expected `,' or `;' before '*' token make[3]: *** [thinkeramik.lo] Error 1 make[3]: Leaving directory `/home/dave/Desktop/thinkeramik-3.2.1/kwin' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/dave/Desktop/thinkeramik-3.2.1/kwin' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/dave/Desktop/thinkeramik-3.2.1' make: *** [all] Error 2 Of course I tried to look up these errors on Google, but it was a fruitless search. Does anyone know why I would be getting these errors if the configure ran okay? Dave

1 0

Re: [CentOS-announce] CESA-2005:595 Moderate CentOS 3 i386 SquirrelMail - security update
by Donald Murray 09 Aug '05

09 Aug '05

Is there another update pending for squirrelmail? The RHSA was updated on August 4th because the original fix had a bug in the addressbook. See: https://rhn.redhat.com/errata/RHSA-2005-595.html On 8/3/05, Tru Huynh <tru(a)centos.org> wrote: > CentOS Errata and Security Advisory CESA-2005:595 > > SquirrelMail security update for CentOS 3 i386: > https://rhn.redhat.com/errata/RHSA-2005-595.html > > The following updated file has been uploaded and is currently syncing to > the mirrors: > > i386: > updates/i386/RPMS/squirrelmail-1.4.3a-10.EL3.centos.1.noarch.rpm > > source: > updates/SRPMS/squirrelmail-1.4.3a-10.EL3.centos.1.src.rpm > > You may update your CentOS-3 i386 installations by running the command: > > yum update squirrelMail > > Tru > -- > Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) > http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B > > > _______________________________________________ > CentOS-announce mailing list > CentOS-announce(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-announce > > > >

1 0

Where should my Xdefaults file be?
by Dave Gutteridge 09 Aug '05

09 Aug '05

Apparently in order to get Japanese input working, I need to edit my Xdefaults file. By hunting on the web, I've read that I can create my own Xdefaults file, but it's been very difficult to determine where I should create it. I simply want to add the following line to this file: *inputMethod kinput2 ... so that Japanese input will be enabled. I want this setting to be global for all users of my machine (which is only me, but just in case). So where is, or where should be, my Xdefaults file? Just in case anyone wants to know where I got this idea from, I got it from here: http://laeren.zoggins.net/japan/japanmoz.shtml Thanks

3 4

making a route sticky
by Aleksandar Milivojevic 09 Aug '05

09 Aug '05

Is it possible to have a route stick in the kernel, even if device it points to goes to roller coaster up and down drive. For example. I have an ADSL modem and am doing VPN over it. There's a route needed for VPN added like this: ip route add 192.168.1.0/24 via 1.2.3.4 src 192.168.2.1 There are two problems with it: a) if ADSL link is down when above command is executed, the route command will fail (ppp0 is down, so there's no 1.2.3.4) b) if ADSL link is up when above command is executed, but it goes down (and up again) later, the route is removed from kernel routing tables So, if there are any problems with ADSL link, I need to manually reset my VPN setup. I could write some monitoring script (and call it from cron) that would check if route is present and attempt to readd it if needed, but I'd rather be able to have the route either sticky (not removed when interface goes down) or automatically reenabled by the kernel when interface goes up again. Thanks, Aleksandar Milivojevic ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

7 23

2.4 kernel on CentOS 4.1
by Harald Finnås 09 Aug '05

09 Aug '05

Just wondering if anyone is running a 2.4 kernel with CentOS 4.1? I need to "downgrade" for compatability with a disk driver, and from experience I know this can be a HUGE problem with certain other distros... Regards, Harald

2 1

Missing dependencies for HA
by John Banas 09 Aug '05

09 Aug '05

CentOS 4.1 and Heartbeat 2.0.0. I'm trying to install the rpm's for heartbeat and heartbeat-stonith and get these failed dependencies. error: Failed dependencies: libcrypto.so.0.9.7 is needed by heartbeat-2.0.0-1.i586 libnet.so.0 is needed by heartbeat-2.0.0-1.i586 librpm-4.1.so is needed by heartbeat-2.0.0-1.i586 librpmdb-4.1.so is needed by heartbeat-2.0.0-1.i586 librpmio-4.1.so is needed by heartbeat-2.0.0-1.i586 libcrypto.so.0.9.7 is needed by heartbeat-stonith-2.0.0-1.i586 I tried looking for them under Fedora 3 and 4 without any luck. Anyone know were I can find them? I have openssl installed and I have rpm-libs installed but I'm still coming up empty.

2 1

Ivan Čaplovič je na dovolenke.
by icaplovic＠gamo.sk 09 Aug '05

09 Aug '05

I will be out of the office starting 09.08.2005 and will not return until 28.08.2005. Odpoviem Vám, keď sa vrátim. Prípadne je ma možné kontaktovať formou SMS na mobilnom telefóne.

1 0

httx, iiimf, and Japanese input still not working
by Dave Gutteridge 09 Aug '05

09 Aug '05

Japanese input - the final frontier. This is the last obstacle before I can work completely within Centos and be free of Windows. But it's still not working. To cut to the chase, in my quest to get Japanese working, I came across the following: https://www.redhat.com/archives/fedora-i18n-list/2004-November/msg00030.html ... where someone says: "You need to have httx (htt_xbe) running to use iiimf in KDE." Okay, so I go looking on the net for httx, but can't quite figure out what it is or how to download it. So my question is what is it, where do I get it, and will it help me get Japanese input? Now, for anyone who needs a reference, what follows is how I came to find out about httx. I was following the instructions on this page: http://fedora.redhat.com/projects/i18n/iiimf-faq.html And here are the results of some of the commands they suggest to check if iiimf is running in KDE: [root@localhost dave]# service iiim status htt (pid 3193) is running... [root@localhost dave]# rpm -qa |grep iiimf iiimf-csconv-12.1-13.EL iiimf-protocol-lib-11.4-43 iiimf-libs-devel-12.1-13.EL iiimf-libs-12.1-13.EL iiimf-gtk-12.1-13.EL iiimf-client-lib-11.4-43 iiimf-x-12.1-13.EL iiimf-gnome-im-switcher-12.1-13.EL iiimf-le-unit-12.1-13.EL iiimf-client-lib-devel-11.4-43 iiimf-server-12.1-13.EL iiimf-le-canna-12.1-13.EL iiimf-docs-12.1-13.EL iiimf-protocol-lib-devel-11.4-43 [root@localhost dave]# ps auxwww | grep httx root 4433 0.0 0.2 5272 664 pts/4 S+ 18:38 0:00 grep httx [root@localhost dave]# LANG=ja_JP.UTF-8 XMODIFIERS=@im=htt kedit QInputContext: no input method context available QInputContext: no input method context available When I went to Google to look up this error, that's when I eventually came across httx, but that's where I was stonewalled. I hope someone can help me get this last piece of the puzzle in place. Dave

4 5

Compiling kernel/drivers for hw RocketRaid 1640
by JN 08 Aug '05

08 Aug '05

I picked up a RocketRaid 1640 card b/c it had support for "RedHat". Apparently, their version of "RedHat" is "stable"(9), which I pointed out was "dead" for all security purposes... (at least, that was what I understood from someone in one of the RH/clone IRC channels.) It turns out that I need to build a new driver from their open source code. This task is a little over my head. (Appears to be a 'lot' over my head, but I'm assuming that it just looks bigger than it is b/c I keep reading "compiling a kernel isn't that hard..." ... yet, I've yet to be successful on any platform.) I'm in this mess because I recommended our company use Linux for a fileserver. I think that once it is up and running, it will be the rock-solid workhorse that I claimed it could be... however, I've got to get past this hurdle first. Is there a FAQ for compiling a new kernel specifically for CentOS 4.1? I've tried some of the generic flavored FAQs, but I tend to get confused with the differences between the flavors. (I was reading something in the slackware forums about using lilo as the first step to compiling a new kernel... ) -- the point is that someone tells me "CentOS is identical to RHEL 4", then I go and look at RHEL 4 docs, and they say that the source package for the kernel has been removed, and you need to download the RPM which is only available from them... I can't be sure, however, I don't think CentOS is identical in this way... Really, I'd like a FAQ for specific kernel compilation on CentOS 4.1, however, failing that, here are the error messages that I'm getting: In trying to follow this guide: http://crab-lab.zool.ohiou.edu/kevin/kernel-compilation-tutorial-en/index.h… , I was unable to complete step 4: first and foremost, there was no mention of rpm-build in that guide, which I was told I needed to install, and did, seemingly without issue. This was the next message I received: > [root@localhost jae]# rpm -ivh kernel-2.6.9-11.EL.src.rpm > 1:kernel warning: user builder does not exist - > using root > warning: group builder does not exist - using root > warning: user builder does not exist - using root ... Which I suspect was my own fault for trying to use a non-root script as root to install the kernel source. Exiting root status back into my user account yielded this: > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file I have no idea what these messages are trying to tell me... but I did note further links in this guide, and ultimately modified /etc/rpm/macros, copying this code: http://users.tkk.fi/~tkarvine/rpm-build-as-user.html ... which resulted in more errors: > [j@localhost ~]$ sudo rpm -ivh kernel-2.6.9-11.EL.src.rpm > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > sh: -c: line 0: unexpected EOF while looking for matching `"' > sh: -c: line 1: syntax error: unexpected end of file > error: cannot create %sourcedir /rpmbuild/kernel ... Can someone *please* point me in the right direction? Thanks! -- J.N.

1 0

Bandwidth limiting
by Joe Klemmer 08 Aug '05

08 Aug '05

Since shapecfg is no longer part of the distro what are people using in place of cbq to limit/throttle bandwidth? I have an ftp mirror that, if left unchecked, will suck up the entire bandwidth of the CoLo site. TIA, Joe -- My Useless Vanity Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other useless junk

4 8

KDE Upgrade from 3.3.1 to 3.4.2
by duffmckagan 08 Aug '05

08 Aug '05

I have downloaded the required KDE files (version 3.4.2)(I know what all files are required), and tried to simply upgrade using the rpm -Uvh command. But i began getting dependency problems. Now, what I did was searched google like a mad buffalo :P to find that missing files, and was successful to a great extent. But the weird thing was I got a few conflicts, which I can't around with. Please guide me what needs to be done. Here is the excerpt from the failure of dependency list . (the following are just the conflicts that are at fault. ----------------------------------------------------------------------------------------------------------------- kdeaddons < 0:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 kdeartwork < 0:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 kdebase < 6:3.3.90 conflicts with kdelibs-3.4.2-1.1.el4.kde.i386 ----------------------------------------------------------------------------------------------------------------- Hope you can help. -- "No-one dies a virgin. Life screws everyone."

4 7

Help required on pxe booting + installation of CentOS
by manish jain 08 Aug '05

08 Aug '05

Hi, I have a (bugridden, idiotic) fedora 4 server with tftpd, nfsd and dhcpd support. I want to remove fedora from my network and initiate pxe installation of CentOS Linux on all machines on my network from my fedora box. I have the CentOS's pxe-kernel and pxe-initrd images. I have also compiled fedora's pxeboot file from the sources and placed it in /tftpboot/. Can someone please guide me through the steps I need to take to get CentOS to boot via pxe from my box and install from an NFS-exported directory containing the whole CentOS distribution ? Thanks for any help. And thanks also for CentOS. Red Hat is just murdering Linux with its distributions - Fedora is a great reason for people to use Microsoft Windows. Manish Jain ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs

3 2

proper use of alternatives framework
by Jim Perrin 08 Aug '05

08 Aug '05

So in a previous thread about java installs, I became more aware of /usr/sbin/alternatives and the links in /etc/alternatives. In an effort to not get lost in that thread (and mostly because it's a seperate topic and may help others when searching the list) I decided to posit my question directly. Rather than hack like a caveman at my installs of java and other things that fit into the alternatives framwork, I've been reading the man pages and googling, but sometimes I need things spelled out using crayons and small words. If someone has some documentation or insight about using the alternatives framework, including the --slaves options, I would be immensely appreciative. -- Jim Perrin System Administrator - UIT Ft Gordon & US Army Signal Center

2 1

Samba Update
by Support 08 Aug '05

08 Aug '05

Hi all, we have CentOS 3.3 running here on our Samba server. Problem is, that we need to mount samba shares on our Win2003 server. Is there a way to install (new) samba-3.1 rpms for CentOS 3.3? tia!

6 5

Java installation problem.
by duffmckagan 08 Aug '05

08 Aug '05

I downloaded the jre-1_5_0_01-linux-i586-rpm.bin files and then run it as ./jre-1_5_0_01-linux-i586-rpm.bin. It resulted in an rpm file. and then i used rpm -iv jre-1_5_0_01-linux-i586-rpm Everything went fine and I didn't get any error. But when I do java -version ......i don't get any output. I would like to know whether java is installed on my system or not. PS: I have carried out all the proceses as root. -- "No-one dies a virgin. Life screws everyone."

9 24

CentOS-3.3 to 3.5 Upgrade Error
by Support 08 Aug '05

08 Aug '05

Thank you for the advice to update! Problem is that i get the following error message: Gathering header information file(s) from server(s) Server: CentOS-3.3 - Addons Server: CentOS-3.3 - Base Server: CentOS-3.3 - Extras retrygrab() failed for: http://mirror.centos.org/centos-3/3.5/extras/i386/headers/header.info Executing failover method failover: out of servers to try Error getting file http://mirror.centos.org/centos-3/3.5/extras/i386/headers/header.info [Errno 4] IOError: HTTP Error 404: Not Found Somebody knows what´s going wrong? tia!

2 1

kernel panic last night
by Jerry Geis 07 Aug '05

07 Aug '05

I had a kernel panic last night. Cam in this morning and had the dump info on screen but could not find anything in the /var/log/messages file. I am using CentOS 4.1. Had been running for weeks no problem. How do I find out what crashed. THanks, Jerry

2 1

CentOS-announce Digest, Vol 6, Issue 4
by centos-announce-request＠centos.org 07 Aug '05

07 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:595-02 Moderate CentOS 4 x86_64 SquirrelMail - security update (Johnny Hughes) 2. CESA-2005:595-02 Moderate CentOS 4 i386 SquirrelMail - security update (Johnny Hughes) 3. CESA-2005:543 Moderate CentOS 4 x86_64 ruby - security update (Johnny Hughes) 4. CESA-2005:543 Moderate CentOS 4 i386 ruby - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 06 Aug 2005 12:32:09 -0500 From: Johnny Hughes <mailing-lists(a)hughesjr.com> Subject: [CentOS-announce] CESA-2005:595-02 Moderate CentOS 4 x86_64 SquirrelMail - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1123349529.24686.26.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:595-02 https://rhn.redhat.com/errata/RHSA-2005-595.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: squirrelmail-1.4.3a-12.EL4.centos4.noarch.rpm src: squirrelmail-1.4.3a-12.EL4.centos4.src.rpm

1 0

single CD CentOS 4.1 i386 server install .iso ??
by Robert Hanson 07 Aug '05

07 Aug '05

greetings, is there a single CD CentOS 4.1 i386 server install .iso ?? if not, is it being made or in process to be constructed/made ? -- Robert Hanson Abba Communications http://www.abbacomm.net

4 4

Softick Card Export on Linux with Palm Tungsten E
by Etienne Savard 06 Aug '05

06 Aug '05

Hello, I just installed Softick Card Export 2.19 (http://www.softick.com/cardexport2/) on my Palm Tungsten E. It is supposed to let me access the SD card inside my Palm without the need of an external SD card reader. This software is suppposed to be compatible with Linux usb-storage since version 2.15... but I didn't find how to use it. If I do "lsmod | grep -i usb", I see the following: usb_storage 61193 0 scsi_mod 121293 2 sd_mod,usb_storage usbserial 25769 1 visor Anybody have experience with that software or any idea how to mount an usb-storage device? I'm running Centos 4.1. Thanks! Etienne Savard.

1 1

CentOS-announce Digest, Vol 6, Issue 3
by centos-announce-request＠centos.org 06 Aug '05

06 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:595-02 Moderate CentOS 3 ia64 SquirrelMail - security update (Pasi Pirhonen) 2. CESA-2005:595-02 Moderate CentOS 4 ia64 SquirrelMail - security update (Pasi Pirhonen) 3. CESA-2005:543 Moderate CentOS 4 ia64 ruby - security update (Pasi Pirhonen) 4. CESA-2005:595-02 Moderate CentOS 3 s390(x) SquirrelMail - security update (Pasi Pirhonen) 5. CESA-2005:595-02 Moderate CentOS 4 s390(x) SquirrelMail - security update (Pasi Pirhonen) 6. CESA-2005:543 Moderate CentOS 4 s390(x) ruby - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 5 Aug 2005 17:54:42 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:595-02 Moderate CentOS 3 ia64 SquirrelMail - security update To: centos-announce(a)centos.org Message-ID: <20050805145442.GD31284(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:595-02 https://rhn.redhat.com/errata/RHSA-2005-595.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/squirrelmail-1.4.3a-11.EL3.centos.1.noarch.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

3 2

Updating an RH3 system from CentOS
by Colht, Charles 06 Aug '05

06 Aug '05

Can I maintain an RH3 system using centos packages? I admin a non-profit's server and got them RH3 but the subscription has expired. I would rather not reload the os, rather just update it using centos and yum. I haven't worked with yum much, how do I configure it? TIA Chuck *********************************************************************************** This transmittal may contain confidential information intended solely for the addressee. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, distribution or copying of this transmittal is strictly prohibited. If you have received this communication in error, please notify us immediately by reply or by telephone (collect at 907-564-1000) and ask to speak with the message sender. In addition, please immediately delete this message and all attachments. Thank you. ACS

3 2

VSFTP/MySQL
by Franki 06 Aug '05

06 Aug '05

Hi guys, Just a quick question, I've been slowly moving all my user services to mysql backend, I realise it's probably not as good a choice as LDAP, but you tend to stick with what you know. To that end I want to setup both Apache and VSFTP to use mysql db for virtual users. Basically I want to create virtual users that are locked into their own home dir and have apache use mysql to work out it's virtual hosts. I can probably work out apache by myself as I've done similiar things before, but VSFTP seems to be fairly lax in the online documentation aspects so I'd appreciate any tips from the gurus. regards Franki

4 5

Qube2
by Tom DE BLENDE (GCC) 06 Aug '05

06 Aug '05

Hi, I was just wondering whether someone has any experience installing Cent0S on a Qube2. Kind regards, Tom

3 2

CentOS 4.0 compatible with Dell's OpenManage?
by Andrew Vong 06 Aug '05

06 Aug '05

Hi, I'm looking into purchasing a few Dell Servers and installing it with CentOS 4.1. It comes with this software called the the Dell OpenManage Software Kit for PowerEdge that allows for remote monitoring of the servers. Has anyone out there successfully installed the OpenManage s/ware? Is it compatible with CentOS 4.1? Any opinions / feedback is welcome. Thanks. Best Regards, Andrew

6 5

FS problems on Centos4 LVM
by James B. Byrne 06 Aug '05

06 Aug '05

I was creating some directories (mkdir xxxx) while cd'ed to a mounted LV. The first couple of directories were created but subsequent attempts give the following error: #mkdir: cannot create directory `xxxxx': Input/output error The contents of /var/log/messages shows this: Aug 5 10:48:57 inet05 kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Aug 5 10:48:57 inet05 kernel: hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=43072608, sector=43072608 Aug 5 10:48:57 inet05 kernel: ide: failed opcode was: unknown Aug 5 10:48:57 inet05 kernel: end_request: I/O error, dev hda, sector 43072608 Aug 5 10:48:57 inet05 kernel: EXT3-fs error (device dm-4): read_block_bitmap: Cannot read block bitmap - block_group = 68, block_bitmap = 2228224 Aug 5 10:48:57 inet05 kernel: Aborting journal on device dm-4. Aug 5 10:48:57 inet05 kernel: ext3_abort called. Aug 5 10:48:57 inet05 kernel: EXT3-fs error (device dm-4): ext3_journal_start_sb: Detected aborted journal Aug 5 10:48:57 inet05 kernel: Remounting filesystem read-only Aug 5 10:48:57 inet05 kernel: EXT3-fs error (device dm-4) in ext3_reserve_inode_write: Journal has aborted Aug 5 10:48:57 inet05 kernel: EXT3-fs error (device dm-4) in start_transaction: Journal has aborted Aug 5 10:48:57 inet05 kernel: EXT3-fs error (device dm-4) in ext3_mkdir: Journal has aborted What is going on? How do I fix it? Regards, Jim The favour of a direct response is requested as I am a diges subscriber. -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

5 5

What's the Linux equivelant of an exe file?
by Dave Gutteridge 06 Aug '05

06 Aug '05

This is one of those questions that seems to be soo obvious to people that no one feels the need to have an explanation anywhere. I've been looking around the net for ages, and I can't figure out what, on Linux, is actually a program. I've downloaded OpenOffice 1.9 Beta, and would like to run it. I go to the /opt/openoffice.org1.9.122/program/ directory and... then what? What do I run to start the thing? I've hunted around with ls, and I thought bin files were the thing, but they don't seem to run. I'm trying to run the program, associate the program with .ods files, and get some icons in my task bar. But I can't do any of those if I don't know what is actually the program. Help? Dave

11 15

sendmail refusing incoming connections from outside
by dan1 06 Aug '05

06 Aug '05

Hello. I am scratching my head about sendmail for a simple thing: I have a CentOS 4 box on which I would like to receive e-mails. when I type 'telnet localhost 25' I can connect successfully to the sendmail service. Now if I type: 'telnet 192.168.0.30 25' on the same host the connection is refused. It also refuses connections from another host. I have edited the /etc/mail/access file and added: 192.168 OK But this doesn't help after a restart. Does somebody know why the connection is refused ? I can see that behaviour on several CentOS box I have so it seems to be the new default. What parameter should I change to make it be accepted ? Thank you, Daniel

8 10

ipw2200
by centos＠911networks.com 05 Aug '05

05 Aug '05

Hi, I have CentOS4.1 up to date and I get on boot: ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection divert: allocating divert_blk for eth1 ipw2200: ipw-2.2-boot.fw load failed: Reason -2 ipw2200: Unable to load firmware: 0xFFFFFFFE divert: freeing divert_blk for eth1 ipw2200: failed to register network device ipw2200: probe of 0000:03:03.0 failed with error -5 My understanding from RedHat is that the current update includes ipw2200 v1.0.4. I have googled around, and cannot find a decent howto. Any suggestion? -- Thanks http://www.911networks.com

2 2

SMTP auth with Sendmail
by Peter Farrow 05 Aug '05

05 Aug '05

Dear All, I have two machines, a Centos 3.4 machine and a Centos 4.1 machine. I have used the same sendmail.mc file on each, and 3.4 machine does plain SMTP auth with no problems, compiling the same mc file on the 4.1 machine gives this error: xxxxx [x.x.x.x] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA in the logs, it doesn't even try to authenticate, the cyrus sasl rpm is installed for auth PLAIN It reports this from the EHLO so all looks good: 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-AUTH DIGEST-MD5 CRAM-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP The 3.4 box reports this: 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-AUTH LOGIN PLAIN 250-DELIVERBY 250 HELP Any help would be greatly appreciated.... P.

3 5

RE: [CentOS] US Federal Government to require MSIE for copyrightpreregistration
by Colht, Charles 05 Aug '05

05 Aug '05

Doesn't this constitute government sponsorship of a religon? -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Phil Schaffner Sent: Thursday, August 04, 2005 7:36 PM To: CentOS mailing list Subject: [CentOS] US Federal Government to require MSIE for copyrightpreregistration The following OT thread from fedora-list may be of some interest to this list also. https://www.redhat.com/archives/fedora-list/2005-August/msg00730.html https://www.redhat.com/archives/fedora-list/2005-August/msg00801.html Phil _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos *********************************************************************************** This transmittal may contain confidential information intended solely for the addressee. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, distribution or copying of this transmittal is strictly prohibited. If you have received this communication in error, please notify us immediately by reply or by telephone (collect at 907-564-1000) and ask to speak with the message sender. In addition, please immediately delete this message and all attachments. Thank you. ACS

1 0

OT: cheap DVD-RAM media?
by Aleksandar Milivojevic 05 Aug '05

05 Aug '05

A bit off-topic. Not a question on how to get it working, but rather question about an practical issue after you get it to work ;-) I got a DVD burner that supports DVD-RAM (in addition to standard DVD+R/-R). I really liked "use it just like hard disk" properties of DVD-RAM, and according to some sources I found, the media itself is more resistant to ageing than standard DVD+R/-R. Great for archiving my data. But the media seems to be quite expensive. I guess mostly because all the places I found were selling it in most expensive option: as single disc in a nice (and useless) case. Haven't found a single place that sells them on spindle. At the end, I ended up buying a 3-pack, with each media in bulky movie-type case (what a waste of space). Does anybody know of any place that sells DVD-RAM media cheap (in bulk, on spindle)? Thanks, Aleksandar Milivojevic ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

5 7

Recommended hardware for a firewall/router?
by Harald Finnås 05 Aug '05

05 Aug '05

Not really a CentOS specific question, but I hope it's ok... I've decided to buy a server to use as a firewall/router instead of the usual Cisco box, simply because I've come to love Firewall Builder and would like to put all my subnets into one firewall. There will be four gigabit interfaces in the box, one of which will be the internet connection (so this one interface will use max. 10 mbit). Question is if any "normal" hardware will be able to handle this if most of the interfaces gets saturated? What chipset / motherboard should I go for? On a sidenote, I've noticed from the subject on some of the most recent messages that Bryans beeing hassled. I dunno what it's really about since I haven't read the messages, but I'd like to say that I consider Bryan to be a valuable asset to this list. Regards, Harald

6 7

probes on udp port 500
by Aleksandar Milivojevic 05 Aug '05

05 Aug '05

Last couple of days some of my hosts were probed for UDP port 500 (IKE daemon, used by IPSec for key exchange) from dialup IPs. Don't remember seeing similar probes before. Some new vaulnerability that script kiddies (and pro crackers) are trying out, or is this some old stuff? I do remember there were some security problems with racoon in the past (that were fixed in current CentOS ipsec-tools packages), but don't remember reading anywhere there were any automated tools to exploit it floating around. Or are there some new flaws discovered recently in some IKE implementations? ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

17 30

Modify rescue mode boot?
by Alberto Gonzalez 05 Aug '05

05 Aug '05

Hi, I have been able to boot with pxe and load linux rescue, it loads loader and ask me lang, keyboard,load base from nfs, etc... then it ask me about mount chroot or skip, I just choose skip to go to shell. What I want is boot in rescue mode and get a shell directly without having to enter lang, keyboard, nfs ip and dir, skip, etc... once booted on shell I want it automatically run a script mounted via nfs /mnt/source/myscript p.e. any idea on how to avoid all those questions from rescue mode?? Thanks.

2 2

3Ware Escalade 9500S mature enough yet for CentOS?
by Robert Hanson 05 Aug '05

05 Aug '05

greetings, the subject says it all right? ;-> naw...... is the 3ware Escalade 9500S series mature enough yet for CentOS? - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

9 16

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss