- Discuss - lists.centos.org

X stopped working after compiling new kernel
by first last 08 May '05

08 May '05

Hi again, After quite a few stability problems with CentOS 4 and my laptop I have decided to go back to Centos 3. I installed it and got everything working alright, apart from the wireless network card. I need to use ndiswrapper and so require a newer kernel (2.4.26 at least), so I downloaded the kernel source 2.4.30, copied the right configuration (config-i686), made oldconfig and installed the kernel. Everything boots alright but X complaints about invalid checksum in the video bios. Searching for this error message it mentions that I should enable agpgart and support for my card (i852 or so) in the kernel, but it is already supported (I have tried it as a module and compiled right in). Anyone got any suggestions on how to get X working again? Do I need to get any extra RHEL patches before I can compile the code? Any help will be greatly appreciated. Gabriel ___________________________________________________________ How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com

2 1

Bacula
by Patrick Lawrence - CentOS Lists 07 May '05

07 May '05

Hello, Has anybody built RPMs of Bacula for CentOS 4 X86-64? I only have one machine and it's in production use so I don't want to install all of the needed dependencies on it in the event somebody else has already built it. Thanks, Pat -- "Let's Roll" - Todd Beamer

2 3

New to CentOS, is this a safe bet?
by Preston Crawford 07 May '05

07 May '05

I know this may be a stupid place to ask, but I have to ask. I'm looking for a new Linux distro to use and support. I've been a loyal purchaser of SuSE Linux Pro for the last 3 years. I've paid my $90 loyally, in part because I wanted money to actually go to someone working on OSS, but also because I thought it was a good bargain, to get a quality, tested distro for that cost. The problem is that lately SuSE is sliding down the path towards being considered Fedora-like by Novell. So when I install SuSE I don't know if I'm going to get security updates next week or the week after. My $90 may have just gone to be a 6-month or 1-year beta tester. I need more stability than that. So I'm considering CentOS based on some articles I've read lately, as my solution. What I'm looking for is a good solid distro that COULD do some multi-media if I go hunt down the RPMs or if there's a YUM repository (I'm familiar with Fedora), but mostly a solid distro where I can do Java work daily and where the distro is memory efficient, solid and stable. And also where if I decide to run it for a year or more I won't be forced to upgrade. Now I believe CentOS promises all of these. My concerns, in terms of it being a safe bet are... #1 - Is there any reason to fear Red Hat bringing the hammer down and thus ruining the party? I'd love to see an FAQ or something to the effect that legally there's no way for Red Hat to block what CentOS is doing. #2 - Is the community strong? I'm new to the community and when I look on distrowatch it's way down the list. But is this accurate or is CentOS picking up steam? I get the feeling it's picking up steam. The reason this is important is because I'd hate to pick it only to watch it wither and have to go distro-hopping again. Once again, looking for stability. Any responses that can help me decide are appreciated. Thanks. Preston

8 7

Re: [CentOS] problem with swap and upgrade to 4 from 3.3
by Bryan J. Smith <b.j.smith＠ieee.org> 07 May '05

07 May '05

From: Peter Farrow <peter(a)farrows.org> > Hi There, > Yes I agree, I always raid the swap.....when the original install was > done a staff member (who I have now fired :-) ) did not raid the swap > partitions at install time, leaving me with this problem after raiding > them subsequently Definitely. Although one should _avoid_ RAID-5 and, in the worst case, consider RAID-3 or RAID-4, if RAID-1 or RAID-0+1 is not possible. -- Bryan J. Smith mailto:b.j.smith@ieee.org

2 1

problem with swap and upgrade to 4 from 3.3
by Peter Farrow 07 May '05

07 May '05

Dear All, I've tried to upgrade a Centos 3.3 installation to 4.0 using YUM and some instructions I found in a thread on the Centos Forum. The initial problem I had with Python 2.3/2.2 has been resolved, and now I am trying to upgrade the kernel to 2.6 prior to the yum upgrade, unfortunately it bails out at the end with dependancy erros on Xfree86. At this point I decided to use the CDs with a the "upgradeany" option. This went fine initally but then bails out with a swap error, this is because swap on this machine is on /dev/md2 (a mirrored set) and this was not set up at the original install time, as all the other partitions were: when the machine was installed, one of my staff did not set the swap up mirrored, so I had to mirror the swap partition manually after the original install. This works fine, but the machine cant enable the swap at boot becuase it does this prior to enabling the RAID subsystem, so the swap startup fails, but once the machine is up, the swap is actually running without any manual intervention. Its this error, that stops anaconda from upgrading the OS from the CDs I note on other machines I have installed when the swap was mirrored on the original install, it still appears to enable swap prior to the RAID subsystem, without any errors. So I guessed this might be a problem with the ram disk image, so I created a new one using mkinitrd, but the swap still fails at startup, thus preventing me from using the CDs to upgrade the box. I guess I could set the swap back to an unmirrored set, run the upgrade from the CDs then mirror it again, but this is not ideal, does anyone have any suggestions as to how to fix this little RAID niggle with the swap caused by not RAIDing the swap parition originally on install? Regards Pete

3 3

Re: imap on Centos 4 -- UW IMAP 2004b for FC3/RHEL4
by Bryan J. Smith <b.j.smith＠ieee.org> 07 May '05

07 May '05

From: Matt Hyclak <hyclak(a)math.ohiou.edu> > Actually, the more direct replacement would be Dovecot. > Cyrus can be complicated to set up and get running. I actually modified the old UW IMAP 2002 SPEC file from RHL9/FC1, and modified a few config files, to support UW IMAP 2004b. I made one with both RFC3501 (no text passwords over SSL) and non-RFC3501 (legacy, text passwords allowed over SSL). I originally released it for Fedora Core 2, e.g. (links no longer work): https://www.redhat.com/archives/fedora-list/2004-August/msg01501.html I have updated it for UW IMAP 2004b on FC3/RHEL4. The only kicker right now is that it is a single set of RPMs, without the client and server in separate RPMs. That will cause a conflict with the client-only UW IMAP package that normally comes with FC2+/RHEL4. One of these days I'll break the client from the server portion in the SPEC file, and host my own APT/YUM repository so it will work with APT/YUM and not generate conflict. But until then, if anyone wants my version, let me know. I try to keep up with UW IMAP releases as vunerabilities are found. The SPEC file only needs to be modified slightly on each new version. -- Bryan J. Smith mailto:b.j.smith@ieee.org

1 0

OT: P4 Vs Xeon for Linux
by Nigel Kendrick 07 May '05

07 May '05

I have just had delivered a new HP Proliant server and it is based on an Intel Xeon 2.8GHz processor. On site already we have an Acer Altos G310 with a P4 2.8GHz processor. The new HP server was destined for another site with about 30 persons to service some simple file and print sharing and to manage their email (postfix + MailScanner). The Acer is hosting our Intranet, file and print sharing and soon to have our email + bacula backup services for potentially 250 users. Performance wise, would it be worth the small effort to move the Intranet etc. onto the Xeon-based server and ship the P4 to the other site or will the potential performance gains not be significant? Any insight appreciated. Thanks

5 7

ACLs iin Centos 4
by Peter Farrow 06 May '05

06 May '05

Hi There, It seems the default installer with Centos 4, enables DACs and the extra ACLs which DUMP cannot handle.... so I get errors like "DUMP: ACLs in inode #nnnn won't be dumped" since DUMP and RESTORE is integral to my back policy for some 30+ machines I would like to know if its possible to turn off the extra ACLs in the file system as I really don't need them... Can tune2fs do this for me or do I have to re-build the filesystems with some option that I currently don't know... P.

2 3

YUM - Did directories change on the mirrors?
by Gerry Lachac 06 May '05

06 May '05

I didn't see this in the mail archives, maybe I missed it. I'm running CentOS 3. It looks like the $releasever directory has been dropped from mirrors.centos.org. This just happened in the last week (I run a daily cron to check for updates) My yum.conf (for CentOS 3) has url's defined like: baseurl=http://mirror.centos.org/centos-3/$releasever/addons/$basearch/ But when I run yum I get errors: Server: CentOS-3 - Addons retrygrab() failed for: http://mirror.centos.org/centos-3/3/addons/i386/headers/header.info Executing failover method failover: out of servers to try Error getting file http://mirror.centos.org/centos-3/3/addons/i386/headers/header.info Using my browser I see that this URL doesn't exist: http://mirror.centos.org/centos-3/3/addons/i386/headers/header.info But this does (notice the 3/ is missing): http://mirror.centos.org/centos-3/addons/i386/headers/header.info Is this a permament change or a temporary one due to server updates? Thanks, -Gerry -- COMPANY: tEtherMedia LLC EMAIL: glachac(a)tethermedia.com OFFICE: 973-386-9580 CELL: 973-479-0797 WEB: http://www.tethermedia.com

2 1

text based terminal program in CentOS 4
by Robert Hanson 06 May '05

06 May '05

Greetings It has been a long time and I cannot recall the name of any text based terminal program(s) for a bash shell. I need to look through serial port 1 on a remote server running CentOS 4. A blanket... rpm -qa | grep term did not help... can you folks please let me know what you use or recommend please? Regards, - rh

2 1

**££!!*** Proliant!
by Nigel Kendrick 06 May '05

06 May '05

This Proliant (ml330 G3) has an HP CSB-6 (LSI/Megaraid) disk controller that isn't recognised by the installer. A quick search on Google reveals drivers from RH7 - AS2.1 but nothing for 3 or 4 unless anyone knows different!? If not I'll just have to disable it and install a supported RAID card. Anyone!? Nigel

4 5

CentOS-announce Digest, Vol 3, Issue 3
by centos-announce-request＠centos.org 06 May '05

06 May '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2005:0506-01 CentOS 4 i386 and x86_64 centos-yumconf - bugfix (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 06 May 2005 06:31:42 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2005:0506-01 CentOS 4 i386 and x86_64 centos-yumconf - bugfix To: centos-announce(a)centos.org Message-ID: <1115379102.15367.5.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and BugFix Advisory CEBA-2005:0506-01 for centos-yumconf centos-yumconf contains the base configuration for yum in CentOS-4 (in the file /etc/yum.repos.d/CentOS-Base.repo) There was a misspelling in the normally disabled "contrib" repository (it was misspelled as contribs). This prevented being able to enable the contrib directory via the command-line and is corrected with this update. The following updated files have been uploaded and are currently syncing to the mirrors: i386 and x86_64: centos-yumconf-4-4.2.noarch.rpm src: centos-yumconf-4-4.2.src.rpm You can get this update with the command: yum update centos-yumconf (If you have modified the file /etc/yum.repos.d/CentOS-Base.repo, a new file named CentOS-Base.repo.rpmnew will be created in /etc/yum.repos.d, and you will have to modify your CentOS-Base.repo to contain the new contrib information) -- Johnny Hughes

1 0

Hello~centos can support this?!
by ryo wong 06 May '05

06 May '05

centos can support promise sata150 tx2 plus?! can support or not plz reply me~thx!!

1 0

graphical shutdown
by Nicola Losito 06 May '05

06 May '05

Hi everyone, I know that Linux "does reboot only for adding new hardware" but here at home I need to do it more often. The shutdown phase is only textual or it can be like on bootup where with "esc" I can see (if i want) the messages ? I can never say if it's me or the "graphical" thing is abandoned ... Thanks for the (eventual) reply... -- Nicola -=KOOLINUS=- Losito web: http://www.koolinus.net icq:62837984 / 110447626 jabber-ID:koolinus@jabber.linux.it msn: koolinuz(a)hotmail.com Y!: koolinus(a)yahoo.it

1 0

How to change the text Messages and GUI screens while Installation
by siva kumar 06 May '05

06 May '05

Hi to every One, I am using Redhat linux 9, I am in process of Customizing the redhat linux 9 for my own purpose(Improving Knowledge).I want To know How to Change the Text Messages and Gui Screens While Installation process. Where i wil get the Documentation for this Please Help me

1 0

RE: [CentOS] shutdown and console messges
by kenkensmile＠netscape.net 06 May '05

06 May '05

Hi I am experiencing the same irritation as you noted in no. 1, but it does not bother me. I thought that it was a normal process to shutdown ????? Joe Collins Richey <crichey(a)gmail.com> wrote: >Just a minor irritation. > >1. When I shutdown from the GDM menu, most of the time the screen goes >black and none of the "stopping..." messages are visible until just >about the time the mounted filesystems are shutdown, about three lines >before acpi poweroff. > >2. Always when I shutdown from my desktop manager (IceWm in my case), >I get all the messages immediately. Once in a blue moon, this works in >case 1 as well. > >No big deal. I'm just wondering if anyone can explain this behavior. > >-- > Collins > When I saw the Iraqi people voting three weeks ago, 8 million of them, > it was the start of a new Arab world.... The Berlin Wall has fallen. > - Lebanese Druze leader Walid Jumblatt >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos > __________________________________________________________________ Switch to Netscape Internet Service. As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register Netscape. Just the Net You Need. New! Netscape Toolbar for Internet Explorer Search from anywhere on the Web and block those annoying pop-ups. Download now at http://channels.netscape.com/ns/search/install.jsp

1 0

mirror site
by Mark Quitoriano 06 May '05

06 May '05

i'm not sure where should i post anyway i want to put up a mirror site(in the philippines) of centos what is the requirements to put one? -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com

2 1

shutdown and console messges
by Collins Richey 06 May '05

06 May '05

Just a minor irritation. 1. When I shutdown from the GDM menu, most of the time the screen goes black and none of the "stopping..." messages are visible until just about the time the mounted filesystems are shutdown, about three lines before acpi poweroff. 2. Always when I shutdown from my desktop manager (IceWm in my case), I get all the messages immediately. Once in a blue moon, this works in case 1 as well. No big deal. I'm just wondering if anyone can explain this behavior. -- Collins When I saw the Iraqi people voting three weeks ago, 8 million of them, it was the start of a new Arab world.... The Berlin Wall has fallen. - Lebanese Druze leader Walid Jumblatt

1 0

CentOS-announce Digest, Vol 3, Issue 2
by centos-announce-request＠centos.org 05 May '05

05 May '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:381 Low CentOS 4 ia64 nasm - security update (Pasi Pirhonen) 2. CESA-2005:381 Low CentOS 3 ia64 nasm - security update (Pasi Pirhonen) 3. CESA-2005:381 Low CentOS 3 s390(x) nasm - security update (Pasi Pirhonen) 4. CESA-2005:406 Moderate CentOS 4 ia64 php - security update (Pasi Pirhonen) 5. CESA-2005:381 Low CentOS 3 i386 nasm - security update (Tru Huynh) 6. CESA-2005:381 Low CentOS 3 x86_64 nasm - security update (Tru Huynh) 7. CESA-2005:397 Moderate CentOS 4 ia64 evolution - security update (Pasi Pirhonen) 8. CESA-2005:406 Moderate CentOS 4 i386 and x86_64 PHP - security update (Karanbir Singh) 9. CESA-2005:397 Moderate CentOS 4 i386 and x86_64 Evolution - security update (Karanbir Singh) 10. CESA-2005:381 Low CentOS 4 i386 and x86_64 nasm - security update (Karanbir Singh) 11. CESA-2005:381-01: Low CentOS 2 i386 nasm security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 4 May 2005 20:06:45 +0300 From: Pasi Pirhonen <upi(a)iki.fi> Subject: [CentOS-announce] CESA-2005:381 Low CentOS 4 ia64 nasm - security update To: centos-announce(a)centos.org Message-ID: <20050504170645.GA13496(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2005:381 https://rhn.redhat.com/errata/RHSA-2005-381.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/nasm-0.98.38-3.EL4.ia64.rpm updates/ia64/RPMS/nasm-doc-0.98.38-3.EL4.ia64.rpm updates/ia64/RPMS/nasm-rdoff-0.98.38-3.EL4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

Any downside to disabling hal service?
by Steve Snyder 05 May '05

05 May '05

I understand the the way to stop the constant polling of my CD-ROM drive (only used every few years to install the OS) is to disable the hal service. Is there any downside to disabling hal other that the lack of auto-insert notification? Thanks.

2 1

removing gnome integration for firefox
by centos-mntr 05 May '05

05 May '05

Does anybody know how to remove gnome integration for firefox? I want to use native firefox open save dialog.

5 8

Yum Amavisd Update fails Digest::MD5 error
by Leonard Isham 05 May '05

05 May '05

Error message is: Starting Mail Virus Scanner (amavisd): Digest::MD5 version 2.22 required--this is only version 2.20 at... Googled for Digest::MD5 and found v2.33 (http://search.cpan.org/~gaas/Digest-MD5-2.33/MD5.pm) Downloaded it untared it perl ./Makefile.PL ...error missing Digest::Base Download from CPAN perl ./Makefile.PL make make test make install Back to Digest::MD5 perl ./Makefile.PL Perl's config says that U32 access must be aligned. Writing Makefile for Digest::MD5 make Makefile:85: *** missing separator. Stop. google information about LANG environment variable... LANG=en_US export LANG error... LANG=C export LANG error... LANG=en_US LANGVAR=en_US export LANG export LANGVAR perl ./Makefile.PL Perl's config says that U32 access must be aligned. Writing Makefile for Digest::MD5 make gcc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -march=i386 -mcpu=i686 -DVERSION=\"2.33\" -DXS_VERSION=\"2.33\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE" -DU32_ALIGNMENT_REQUIRED MD5.c /bin/sh: line 1: gcc: command not found make: *** [MD5.o] Error 127 Any Ideas? -- Leonard Isham, CISSP Ostendo non ostento.

4 6

Re: [CentOS] CentOS 4 - problem with remote X application
by C.M. Connelly 05 May '05

05 May '05

"JH" == Johnny Hughes <mailing-lists(a)hughesjr.com> JH> It is a feature ... really, it is (according to RH) :). JH> Here is a quote from the RH mailing list: RHML> I think by default X11Forwading is now disabled in RHML> SSH. You can either use 'ssh -X' or change it in your RHML> /etc/ssh/ssh_config. I have the following in mine: RHML> ForwardX11 yes RHML> ForwardX11Trusted yes JH> That should make it work the way you expect. Cool, cool, cool. This problem burned me a week or so ago. I figured out the ForwardX11 change, but I was too busy with the end of the semester to look into it any more than that, so never had a clue about ForwardX11Trusted. Luckily, the problem didn't seem to affect my Mac, so I've been using that as my main system. Until the start of this week, when I started having the same problems with X on my Mac after upgrading to Tiger, which was a pretty big clue, but I still wasn't sure exactly where the problem was. Johnny probably should have stressed that you need to add the ForwardX11 and ForwardX11Trusted keys on your client machine (the machine your X server is running on). Knowing about the -Y flag is also a Good Thing. Thanks! Claire -- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* Claire Connelly cmc(a)math.hmc.edu Systems Administrator (909) 621-8754 Department of Mathematics Harvey Mudd College *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

1 0

Running CentOS on very old hardware
by Alfred von Campe 05 May '05

05 May '05

A friend has an old Pentium-133 laptop with 32MB of memory and a 1.3 GB hard disk that he wants to use as a web server for a very small community. Will CentOS (or any other RHEL derived distribution for that matter) install and run with acceptable performance on such a system, or will a specialized distribution like Damn Small Linux be a better choice? In this case, disk space is not a big concern so getting the smallest footprint is not a high priority. Alfred

7 7

Re: [CentOS] Running CentOS on very old hardware
by Bryan J. Smith <b.j.smith＠ieee.org> 04 May '05

04 May '05

Pre-i686 (PPro-P4, K6/Athlon, Cyrix M2/C3, WinChip2?) architectures take issue some applications. E.g., Red Hat, among other distros, have not bothered with pre-i686 NPTL support. There are better distros for i486 (K5, Cyrix Mx/M1, WinChip) or i586 (exactly Pentium-only) architectures than anything Fedora Core based (RHEL), SuSE Linux based (SLES/NOES), Mandrake Linux or similarly based. Although Cobind Linux is supposedly a rebuild of Fedora for older systems. And I've found it runs XFCE pretty good on as little as 48MB. I know Alan Cox used to boast he ran Fedora Core 2 (same core/packages as RHEL4) with XFCE on as little as 48MB on a WinChip2 225MHz (not sure if the IDT Centaur WinChip2 was i486 or i686 ISA compatible though). -----Original Message----- From: Aleksandar Milivojevic <amilivojevic(a)pbl.ca> Sent: May 4, 2005 10:09 AM To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Running CentOS on very old hardware Alfred von Campe wrote: > A friend has an old Pentium-133 laptop with 32MB of memory and a 1.3 GB > hard disk that he wants to use as a web server for a very small > community. Will CentOS (or any other RHEL derived distribution for that > matter) install and run with acceptable performance on such a system, or > will a specialized distribution like Damn Small Linux be a better > choice? In this case, disk space is not a big concern so getting the > smallest footprint is not a high priority. Either put more memory, or go with some older distribution. CentOS 3.x might run on it, not sure what are memory requirements for it. RHEL 2.x would run even better. 64MB should be more that enough for CentOS4 as long as you use it as dedicated plain web server (no fancy stuff, no PHP, no databases, only static content). SSL would slow down things somewhat, but would be acceptable. If you install only basic packages (no X, no additional utilities, no development packages) the installation will take up somewhere around 500MB. -- Aleksandar Milivojevic <amilivojevic(a)pbl.ca> Pollard Banknote Limited Systems Administrator 1499 Buffalo Place Tel: (204) 474-2323 ext 276 Winnipeg, MB R3T 1L7 _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos -- Bryan J. Smith mailto:b.j.smith@ieee.org

2 1

ext3 writeback mode for root parition
by Douglas E. Warner 04 May '05

04 May '05

I'm trying to enable writeback mode for the root partition. However, adding the normal option "rootflags=data=writeback" to my grub.conf kernel line doesn't result in writeback mode (according to `dmesg`). Does anyone know of a way to enable this? -Doug -- Douglas E. Warner <dwarner(a)ctinetworks.com> Network Engineer CTI Networks, Inc. http://www.ctinetworks.com +1 717 975 9000

1 1

how to install R statistics package on Centos-4
by Allison Maury 04 May '05

04 May '05

Hi everyone, I'm a newbie and interested in installing the R statistics package on a Centos-4 machine using yum, if possible. From the R website, I see that I can download an rpm for rhel 4. I don't know if the equivalent exists for Centos. I did look through the list that 'yum list available' yields and didn't seem to find a package for R. Can you recommend how best to install R? Should I install the rhel 4 binary or should I compile from source? How do I use yum to install a downloaded rpm? etc. Thanks for your help, Allison

2 2

CentOS 4 - problem with remote X application
by Petr Klíma 04 May '05

04 May '05

Hello i have a problem on CentOS 4 with starting remote x application on remote CentOS 3 od Solaris 9 boxes. The problem is: When I run it from CentOS 3 it's OK form CentOS 4 I cannot find a bad word in logs ... My local machine stoping firewall [root@klima-pc ~]# service iptables stop [root@klima-pc ~]# iptables-save [root@klima-pc ~]# SELinux is OFF I am connecting by ssh with Xforwarding enabled to - Centos 3 box [09:32 root@tux:root]# gvim --sync The program 'gvim' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAtom (invalid Atom parameter)'. (Details: serial 287 error_code 5 request_code 20 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) [09:33 root@tux:root]# -Solaris 9 box root@sun bin# gvim --sync Gdk-ERROR **: BadAtom (invalid Atom parameter) serial 364 error_code 5 request_code 20 minor_code 0 Gdk-ERROR **: BadAccess (attempt to access private resource denied) serial 365 error_code 10 request_code 102 minor_code 0 root@sun bin#

3 3

CentOS 4 Software Raid1 questions
by Lee Parmeter 04 May '05

04 May '05

I want to mirror an existing 40GB data only drive using software Raid1 on my new CentOS 4 server. The existing drive is connected to a Promise Ultra 100 TX2 controller (non-raid). I have read about mdadm and understand how to create the Raid1 on /dev/mdxx devices. However I would like to know if the existing data on the orignal 40GB drive in the system will be destroyed when I create the raid with mdadm. Also do the 2 drives after being setup with mdadm have to be reformated? Both the 40GB drives are now formated with ext3. If not, will the added 40GB drive assigned to the Raid1 atomaticly sync to the original 40GB drive. If so, what do I need to do to assure this will happend automaticly? Your comments are appreciated, as this is my first time to setup a software Raid1. Lee __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

12 37

Re: ReiserFS3 Support
by Lance Lucas 04 May '05

04 May '05

Along the lines of the recent discussion about ReiserFS support, I was wondering if it is compatible with SELinux? I know there are some file system support issues regarding it... Another random question: is there a way to get/use Disk Druid under a running installation? This would make adding new disks, RAIDs, LVM management, etc. a breeze compared to what it can be like sometimes currently. It's all there and very easy to use during the install, but I haven't found an easy way to add software raid-1 pairs w/LVM2 to a currently running installation. Regards...

1 0

Compiling Kernel Modules
by Maciej Zenczykowski 04 May '05

04 May '05

Hi, Here'a a question - is it possible to compile a single module (distributed in the kernel source tree) for the current CentOS kernel (2.6.9-5.0.5) without recompiling the entire kernel and all other modules. I basically need reiserfs3 (nb. why is it disabled? it's a module, you use it, it doesn't wreck anything...) and I don't really want to change the rest of the kernel, and I'd like to have the minimum amount of fuss on future kernel upgrades. Now I know external modules can be compiled without recompiling the kernel - question is how to do it for an internal kernel module. What I've tried: I've installed the kernel source code, copied over the kernel settings (the entire /usr/src/kernels/2.6.... dir) onto it. run make menuconfig and selected modular reiserfs. A diff of the new and old configs shows only reiser module (and suboptions for selinux) has been enabled. So no other changes have been made. Now a make fs/reiserfs/ almost works, but it borks on some sort of .tmp_versions/reiserfs.mod problem (file not present). The resultant reiserfs.o doesn't work as reiserfs.ko (not sure if it should, though).. I can't run make modules_install without first compiling all the other modules... Should I just grep through the .config file and replace all (except reiser) =m with =n's (and rerun make oldconfig to make sure it's still consistent)? And then run make modules modules_install? Any ideas? Basically all I want is reiserfs3 for the current CentOS4 kernel... Cheers, MaZe.

6 12

User Mode Linux and the CentOS 4.0 Kernel
by Bill Bydder 04 May '05

04 May '05

Does anybody know where I might find a stock standard ready rolled binary CentOS Kernel (2.6.9-5.0.5.EL) rpm package BUT with the skas mode uml (user mode linux) patch applied ? If not I will try and build one myself......gulp.... ;-) Is there any good howto's out their on how to do this? It all appears very different with CentOS 4.0 and the 2.6.9-5.0.5.EL.src.rpm. Cheers Bill

1 0

Re: [CentOS] rebuilding anaconda for centos 4.0
by David Thompson 04 May '05

04 May '05

Johnny Hughes wrote: > >David, I rebuild with the included anaconda every respin :) > >Here is the latest and greatest build script I used for making a 4.1Beta >set of ISOs. > >http://centos.hughesjr.com/testing/build.sh Ahhhh. I had some incorrect usage on genhdlist/pkgorder that was causing the problems. Referencing these and tweaking a couple things has resolved the problem. Thanks much! Dave

1 0

CentOS 4 - problem with remote X application
by Petr Klíma 03 May '05

03 May '05

Hello i have a problem on CentOS 4 with starting remote x application on remote CentOS 3 od Solaris 9 boxes. The problem is: When I run it from CentOS 3 it's OK form CentOS 4 I cannot find a bad word in logs ... My local machine stoping firewall [root@klima-pc ~]# service iptables stop [root@klima-pc ~]# iptables-save [root@klima-pc ~]# SELinux is OFF I am connecting by ssh with Xforwarding enabled to - Centos 3 box [09:32 root@tux:root]# gvim --sync The program 'gvim' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAtom (invalid Atom parameter)'. (Details: serial 287 error_code 5 request_code 20 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) [09:33 root@tux:root]# -Solaris 9 box root@sun bin# gvim --sync Gdk-ERROR **: BadAtom (invalid Atom parameter) serial 364 error_code 5 request_code 20 minor_code 0 Gdk-ERROR **: BadAccess (attempt to access private resource denied) serial 365 error_code 10 request_code 102 minor_code 0 root@sun bin#

2 1

RE: Vacation forwarder - syntax of .forward file - FIXED
by Nigel Kendrick 03 May '05

03 May '05

Sorted!! Looks like I started to play around with my user account while still logged in as root, and .vacation.db in my home directory was owned by root:root - changing it to nkendrick:root has fixed the problem. Regards, Nigel

1 0

Vacation program
by Nigel Kendrick 03 May '05

03 May '05

Is anyone else running the 'vacation' mail forwarder on Centos 3? When I 'make install' I get the following error: strip: /usr/bin/vaclook: File format not recognized When I try and use vacation (with postfix), it 'goes through the motions' but inbound mail bounces with <nkendrick(a)munged.home.local>: Command died with status 1: "/usr/bin/vacation -a nkendrick(a)munged.com nkendrick" I have sent a mail to the postfix list too but I thought I'd see if anyone here has any ideas too. Thanks Nigel

1 0

Re: [CentOS] CentOS 4 Software Raid1 questions
by Lee Parmeter 02 May '05

02 May '05

--- Aleksandar Milivojevic <amilivojevic(a)pbl.ca> wrote: > Lee Parmeter wrote: > > I did not mark the parition type to FD so apparently > the > > kernel or mdadm just executes and looks in the > ndadm.conf > > file. > > > > When trying to start the raid manually, I found that > the > > raid would fail unless I passed the partion assignments > on > > the commandline to mdadm. However, when the DEVICE and > > ARRAY are defined in the mdadm.conf, the partion info > was > > not required, just the device name, "/dev/md0". So, I > think > > the raid failed to start at boot due to not enough > > information being available for it to startup, thus the > > mdadm.conf file being required. > > > > Anyway, that's what my experince told me! > > OK, but have you attempted to mark the partition as type > fd (linux raid > autodetect)? No. Since /dev/md0 is loading OK in fstab, I have not messed with it further. My guess is, if you did, the kernel would > bring it up as > soon as raid* device drivers are loaded. The information > in superblocks > at the end of each partition should be more than enough. I will be creating another raid1 in the next week or two and will try you suggestion then. > -- > Aleksandar Milivojevic <amilivojevic(a)pbl.ca> Pollard > Banknote Limited > Systems Administrator 1499 > Buffalo Place > Tel: (204) 474-2323 ext 276 Winnipeg, > MB R3T 1L7 > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > -- Lee Parmeter Emperor, linXos - The Flying Penguin http://www.linXos.com Linux Registered User #337161 'It's free. It works. Duh.'" - Eric Harrison The United States is NOT a democracy, it was founded as a Republic! God is not a republican or a democrat nor is His government a democracy! - Lee Parmeter __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[ANNOUNCE] Areca SATA RAID drivers for CentOS 4.0
by Matt Dainty 02 May '05

02 May '05

Hi, To follow up my CentOS 4.0/Areca SATA RAID driver disk I created a month or two ago, I have now created kernel-module-arcmsr RPMs containing just the kernel module to track the kernel updates. This means: a) No need to patch, rebuild and maintain customised kernels for Areca support b) Keep everything maintained with RPM I've taken the latest 1.20.00.07 kernel driver source as found in the 2.6.12-rc1-mm3 kernel, and built it for all variations of the i586/i686/x86_64 2.6.9-5.0.5.EL CentOS 4.0 kernels. I've also updated the driver disk so it now has the same kernel driver, but built for all of the i586/i686/x86_64 2.6.9-5.0.3.EL kernels used on the installer. There is also a nosrc RPM for the various utilities Areca offer, but you'll have to build that one yourself as I don't know what license they're released under. As before, you can get them from here: http://www.bodgit-n-scarper.com/code.html#centos I only have an x86_64 machine with an Areca card, so if anyone is using these packages on an i586 or i686 machine, please drop me a note so I at least know they work. Thanks Matt

1 0

Re: [CentOS] CentOS 4 Software Raid1 questions
by Lee Parmeter 02 May '05

02 May '05

--- Les Mikesell <lesmikesell(a)gmail.com> wrote: > On Fri, 2005-04-29 at 12:20, Lee Parmeter wrote: > > > I did not find any information on the web concerning > the > > requirement of the mdadm.conf file and the relationship > to > > the auto start of the raid. I had to work a bit in the > dark > > to get it to work as I thought it should. > > I think if you set the partition type to FD with fdisk, > the > system is supposed to figure everything out automatically > at boot time. I have, however, had some trouble when > moving > pairs of disks built on one machine to a different one > and > would generally prefer to control it with a definition in > a > file if possible instead of having the system guess. If > you > have both, I'm not sure which wins. If you find > documentation > on the detection order or how to move devices, please > post > a link. I did not mark the parition type to FD so apparently the kernel or mdadm just executes and looks in the ndadm.conf file. When trying to start the raid manually, I found that the raid would fail unless I passed the partion assignments on the commandline to mdadm. However, when the DEVICE and ARRAY are defined in the mdadm.conf, the partion info was not required, just the device name, "/dev/md0". So, I think the raid failed to start at boot due to not enough information being available for it to startup, thus the mdadm.conf file being required. Anyway, that's what my experince told me! > -- > Les Mikesell > les(a)futuresource.com > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > -- Lee Parmeter Emperor, linXos - The Flying Penguin http://www.linXos.com Linux Registered User #337161 'It's free. It works. Duh.'" - Eric Harrison The United States is NOT a democracy, it was founded as a Republic! God is not a republican or a democrat nor is His government a democracy! - Lee Parmeter __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

pdflush issue
by William Warren 02 May '05

02 May '05

Has anyone hit this bug yet? I just hit it yesterday. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=150653 -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD.

1 0

CentOS-announce Digest, Vol 3, Issue 1
by centos-announce-request＠centos.org 02 May '05

02 May '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005-0502-001: Low CentOS 2 i386 update 7 (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 02 May 2005 19:48:14 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005-0502-001: Low CentOS 2 i386 update 7 To: centos-announce(a)centos.org Message-ID: <4275F75E.9030600(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHBA-2004:665 Updated dialog package RHBA-2004:671 util-linux bug fix update RHBA-2004:701 Updated xinitrc package RHBA-2005:023 psmisc bug fix update RHBA-2005:024 procps bug fix update RHBA-2005:041 man-pages-ja bug fix update RHBA-2005:052 net-tools bug fix update RHBA-2005:054 logrotate bug fix update RHBA-2005:055 amanda bug fix update RHBA-2005:064 pam bug fix update RHBA-2005:115 chkconfig bug fix update RHBA-2005:117 initscripts bug fix update RHBA-2005:179 raidtools bug fix update RHBA-2005:226 libtiff bug fix update RHBA-2005:240 postgresql bug fix update RHBA-2005:310 lsof bug fix update RHEA-2004:097 Updated mt-st package supports additional tape drives Files available: dialog-0.9a-5.1.AS21.i386.rpm util-linux-2.11f-20.6.i386.rpm xinitrc-3.20.2-1.noarch.rpm psmisc-20.1-3.i386.rpm procps-2.0.7-11.23.i386.rpm procps-X11-2.0.7-11.23.i386.rpm man-pages-ja-20041215-1.EL2.1.0.noarch.rpm net-tools-1.60-19.AS21.3.i386.rpm logrotate-3.5.9-2.i386.rpm amanda-2.4.4p3-1.21as.1.i386.rpm amanda-client-2.4.4p3-1.21as.1.i386.rpm amanda-devel-2.4.4p3-1.21as.1.i386.rpm amanda-server-2.4.4p3-1.21as.1.i386.rpm pam-0.75-46.64.i386.rpm pam-devel-0.75-46.64.i386.rpm chkconfig-1.3.13.2-0.2.1.i386.rpm ntsysv-1.3.13.2-0.2.1.i386.rpm initscripts-6.47.14-1.c2.1.i386.rpm raidtools-1.00.3-8.EL2.1.i386.rpm libtiff-3.5.7-29.el2.i386.rpm libtiff-devel-3.5.7-29.el2.i386.rpm postgresql-7.1.3-7.rhel2.1AS.i386.rpm postgresql-contrib-7.1.3-7.rhel2.1AS.i386.rpm postgresql-devel-7.1.3-7.rhel2.1AS.i386.rpm postgresql-docs-7.1.3-7.rhel2.1AS.i386.rpm postgresql-jdbc-7.1.3-7.rhel2.1AS.i386.rpm postgresql-libs-7.1.3-7.rhel2.1AS.i386.rpm postgresql-odbc-7.1.3-7.rhel2.1AS.i386.rpm postgresql-perl-7.1.3-7.rhel2.1AS.i386.rpm postgresql-python-7.1.3-7.rhel2.1AS.i386.rpm postgresql-server-7.1.3-7.rhel2.1AS.i386.rpm postgresql-tcl-7.1.3-7.rhel2.1AS.i386.rpm postgresql-test-7.1.3-7.rhel2.1AS.i386.rpm postgresql-tk-7.1.3-7.rhel2.1AS.i386.rpm lsof-4.51-2.1.i386.rpm mt-st-0.6-3.i386.rpm As yet there is no official announcement from Red Hat. The release notes are well hidden but don't say much anyway. I have removed a number of superseded updates from the mirror. From now on the mirror will only have the most recent and the previous update available. I will keep an archive of all updates if you even need something historical. More info will be posted soon. More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 3, Issue 1 *********************************************

1 0

yum pinning rpms
by Collins Richey 02 May '05

02 May '05

I did a little googling for this, but only found meaningless references, since pin has too, too common other meanings. Is there a way to pin a version of a particular package with yum/rpm? I have the rpms for the beta 2.0 version of OpenOffice installed, so I'm not interested in the updates for OpenOffice 1.1.2-24.6.0.EL4 which are now coming in. Is there a way to instruct yum to ignore this update but accept other updates? Sorry if this is a dumb question, but in spite of many years working with Linux I'm not an rpm/yum heavyweight. I'm sure, however, others may appreciate the answer. TIA, -- Collins When I saw the Iraqi people voting three weeks ago, 8 million of them, it was the start of a new Arab world.... The Berlin Wall has fallen. - Lebanese Druze leader Walid Jumblatt

2 2

NFS server problem
by Alex Tkachenko 01 May '05

01 May '05

Hi Everybody! I've got a nasty problem with a fresh install of CenOS 4 (actually re-install, to rule out any configuration problems accumulated over time). We have a c4-based machine (further Server), which is supposed to serve a lot of files over NFS. In the course of the setup I was checking how the backups (using rsync) would work and got a lot of errors reported by rsync about non-existent (sub) directories. When I went to check the reported directory on the Client, it was indeed not accessible, although it's name in the parent directory was visible. Later I've found that rsync is irrelevant, the problem could be reproduced by just running find. To illustrate (run on the client) cd /mnt/Server/export find . > /dev/null ./a/b/c: No such file or directory ls -l ./a/b ls: /mnt/server/a/b/c: No such file or directory (then follows the listing of remaining files in ./a/b) If you fo just 'ls ./a/b', the output includes 'c' among the others. NOW THE TRICK: On the Server, do ls /export/a/b/c (expected output follows) Now on the client everything is OK! I've found a similar bug here: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=144556 although it is filed against fc3, the symptoms seem to be the same, although noone mentioned that server-side trick. I've tried several client machines (rhl7.3, c3,c4), tcp/udp, v2/v3, sync/async and also set actimeo=0 - nothing seem to affect the behavior. And nothing is printed in the logs - neither on client nor server (granted, I don't have debug enabled). At some point I suspected hardware (like lost or corrupted ethernet packets), but the missing directory on the client side is missing until the trick is applied on the server side, pretty consistently. umount/mount may help with that particular dir, but the bug would show up in different place. And as per bug referenced above, I could confirm, that all the dirs reported missing have the size 12288 (haven't spotted bigger, but maybe because I haven't checked every one of them). Just in case: the Server is Dell PowerEdge 2850 connected through Gigabit interface (e1000) (latest BIOS updates applied in the course of troubleshooting). I did not try to re-install the server with c3, but even if it works, it does not seem to be an option, because we plan to use selinux, which is missing in c3 (and yes, I tried disabling selinux with setenforce=0). Any suggestion would be greatly appreciated. Have a great day, Alex

2 1

RE: [CentOS] losing NFS connection
by Marc Powell 01 May '05

01 May '05

> -----Original Message----- > From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf Of Angelo Machils > Sent: Sunday, April 24, 2005 1:28 PM > To: centos(a)centos.org > Subject: [CentOS] losing NFS connection > > Hello there! > > Perhaps this is a little off-topic, but I notice this only on the Centos > box. > I'm running Centos 4 on an AMD64 which has the following entries in the > fstab to connect to NFS shares on a Fedora3 box: > 192.168.1.12:/home/angelo/ /home/angelo/NFS_share1 nfs > rw,addr=192.168.1.12 0 0 > 192.168.1.12:/home/angelo/data /home/angelo/NFS_share2 nfs > rw,addr=192.168.1.12 0 0 > 192.168.1.12:/home/angelo/data2 /home/angelo/NFS_share3 nfs > rw,addr=192.168.1.12 0 0 > I have opened ports 111 (TCP), 648 (TCP), 651 (TCP) and 2049 (TCP and > UDP) in iptables on the FC3 box and I can connect to them, but after a > while I seem to loose the connection to the shares. [snip] > > Anyone any idea what is wrong here? Just a thought but have you hard-coded speed and duplex all the way through? Don't trust auto-negotiation. -- Marc

5 4

Thanks (was re: Neosurge.com)
by Johnny Hughes 30 Apr '05

30 Apr '05

On Sat, 2005-04-30 at 07:05 -0400, Mark Weaver wrote: > John, > > I just wanna say THANK YOU for the AWESOME distro and keep up the > fantastic work. CentOS 4 is definitely without a doubt the most > rock-solid, outa-the-box distro I've ever used. And I'm loving every > minute of it. I've even managed to get my boss hooked on it and now our > linux machines are being converted to CentOS. :) > > In the near future I'll be converting all my servers on my network to > CentOS and will absolutely be recommending CentOS to clients. > Thanks ... :) I want to make sure that everyone knows this is a team effort. There are 10 developers in 3 versions (2.1, 3.x, 4.x) and 6 arches (i386, x86_64, ia64, s390, s390x, ppc). Not all of these are currently released, but the ones that aren't are under continuous development. The whole team deserves a lot of thanks for their efforts behind the scenes, especially Pasi Pirhonen. Pasi is doing 3 arches (ia64, s390, s390x) on two versions (3.x and 4.x). The current team is: CentOS-2.1 John Newbigin (2.1 i386) CentOS-3.x Lance Davis (3.x i386 ... overall CentOS Project Lead) Seth Vidal (3.x i386) Will Dinkel (3.x x86_64) Tru Huynh (3.x x86_64, i386) Pasi Pirhonen (3.x ia64, s390, s390x ... even some i386, x86_64) CentOS-4.x Johnny Hughes - (4.x i386, x86_64, helping on ppc) Karanbir Singh - (4.x ppc, helping on i386, x86_64) Pasi Pirhonen - (4.x ia64, s390, s390x, helping on ppc) Also not tied to any one distro / arch is: Donavan Nelson - CentOS web site designer / maintainer / webmaster Russ Herrold - Server Administration / Security / infrastructure support All these guys, and some others like Rick Graves, Matt Shields, and Barrie van Burk, have all contributed (and still contribute) much time and effort to make CentOS a successful and free project. ----------------------------------------------------------- All that being said, for CentOS Project to be able to do some of the things we need to do, we need cash and resources. That's just how it is. CentOS is and always will be a totally free community project. People may download and use CentOS however they see fit. We would ask that if you use it, and if it is a good quality product that meets your needs, that you donate somehow to the CentOS Project. Some people have donated servers on high speed connections (which we use for the CentOS Network where yum/CentOSNetwork-Applet/Up2date point by default to get updates ... and we just recently moved the main website to a new donated server), other people have donated the use of hardware so that we can develop some of the non standard distros on (ppc, etc.). If you can make this type of donation, it is greatly appreciated. Another way that you can help is to donate money to our project. This is the way many of the major community Linux projects are funded ... including Debian, Ubuntu, Slackware, Gentoo, Knoppix, Mepis, etc. Other opportunities also are being started to help the project and other businesses: 1. If you are a CD distributor and would like to be on this page ( http://www.centos.org/modules/tinycontent/index.php?id=24 ), a donation of $1 per CD/DVD set sold will get you there. Contact Lance Davis (lance_at_centos.org) 2. If you are a consulting/service company that does CentOS installs and support, and if you want to be listed on this page ( http://www.centos.org/modules/tinycontent/index.php?id=12 ), a donation of 5% of your CentOS related work revenue will get you listed as a support partner. Contact Lance Davis (lance_at_centos.org) 3. If you can donate a server on a high speed network (minimum 160gb drive space, 10 mbit/sec minimum connectivity, unlimited traffic, preferred). Then you can be on this page ( http://www.centos.org/modules/tinycontent/index.php?id=15 ) of the CentOS site. Contact Lance Davis (lance_at_centos.org) We have established a donation page ( http://www.centos.org/modules/tinycontent/index.php?id=23 ) where we accept payments in USD, EUR, and GBP. We have also come up with suggested amounts depending on your usage. See the page for details ... but the suggest amounts are: USD: 24 / 20 / 15 / 8 EUR: 18 / 15 / 12 / 6 GBP: 12 / 10 / 8 / 4 (those suggested amounts are for <10 / <100 / <1000 / >1000 installs maintained) Just some numbers about CentOS: Amount transfered from the CentOS Network last month: 16.15 TB .... DVDs/CDs downloaded via Bittorrent in the last month: 23,000 (47 TB). Our web ranking on Alexa is currently 41,757 (3 month), 36,247 (1 month). How does that compare with some other sites: Slackware - 56,903, Ubuntu - 23,475, Debian - 6,029, RedHat - 3,043, DistroWatch.com - 24,954, Mepis - 60,374, Gentoo - 15,238, Knoppix - 42,899, White Box Linux - 263,141 ... (lower is better). Over the last 3 months, our average has moved up 128,111 positions and our reach per million internet viewers is up 443%. As always, donations (and amount of the donation) are absolutely voluntary. Please enjoy our product, and help us make it better :) Thanks, Johnny Hughes CentOS-4 Lead Developer

2 1

udev om Opteron
by Geoff Galitz 30 Apr '05

30 Apr '05

Hello, We have a few systems where udevd seems to failing silently on Opteron based Centos 4 boxes. Has anyone else seen this? -geoff

3 2

CentOS 4 and OpenOffice
by Robert 30 Apr '05

30 Apr '05

Has anyone here replaced the openoffice.org packages with those that were distributed with FC3? It's either that for me or simply scrapping CentOS in favor of FC3 (or even FC1). I'm very surprised that I can find no reports regarding the impossibility of formatting multi-page spreadsheets to print properly.

2 4

CentOS-announce Digest, Vol 2, Issue 16
by centos-announce-request＠centos.org 30 Apr '05

30 Apr '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:384-01: Important CentOS 2 i386 Mozilla security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Sat, 30 Apr 2005 17:03:15 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:384-01: Important CentOS 2 i386 Mozilla security update To: centos-announce(a)centos.org Message-ID: <42732DB3.40401(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:384-01 Important: Mozilla security update Files available: galeon-1.2.14-1.2.3.i386.rpm mozilla-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-chat-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-devel-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-dom-inspector-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-js-debugger-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-mail-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-nspr-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-nspr-devel-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-nss-1.7.7-1.1.2.1.c2.1.i386.rpm mozilla-nss-devel-1.7.7-1.1.2.1.c2.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 2, Issue 16 **********************************************

1 0

Neosurge.com
by Johnny Hughes 30 Apr '05

30 Apr '05

All, I would like to thank the latest donor to the CentOS project: Neosurge.com. We have a nice new, shiny server to help get all those updates out faster. http://www.neosurge.com/ Neosurge has plenty of hosting options from normal website hosting to dedicated / co-located servers. And I can vouch for the speed of the traffic into the datacenters. You can definitely get CentOS pre-installed on your server there too. Without donations of this type, the CentOS project could not operate. Thanks Brian :) If you use CentOS and would like to donate a box to the cause, please contact either Lance Davis (lance_at_centos.org) or me (johnny_at_centos.org) ... 'cause more stuff is good :) Thanks, Johnny Hughes

3 2

yum error !!
by israel.garcia＠cimex.com.cu 30 Apr '05

30 Apr '05

I got this error when my server try to update using my own CentOS mirror.... I have downloaded this file from other mirrors....and nothing.... Can you help me? [root@razor bin]# yum -y update Setting up Update Process Setting up Repos update 100% |=========================| 951 B 00:00 Reading repository metadata in from local files update : ################################################## 85/85 Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package telnet.i386 1:0.17-31.EL4.2 set to be updated ---> Package kdelibs.i386 6:3.3.1-3.6 set to be updated ---> Package krb5-workstation.i386 0:1.3.4-12 set to be updated ---> Package up2date.i386 0:4.4.5.6-2.centos4 set to be updated ---> Package mysql-devel.i386 0:4.1.10a-1.RHEL4.1 set to be updated ---> Package curl-devel.i386 0:7.12.1-5.rhel4 set to be updated ---> Package krb5-devel.i386 0:1.3.4-12 set to be updated ---> Package ipsec-tools.i386 0:0.3.3-6 set to be updated ---> Package kernel-hugemem-devel.i686 0:2.6.9-5.0.5.EL set to be updated ---> Package mysql.i386 0:4.1.10a-1.RHEL4.1 set to be updated ---> Package kernel-smp-devel.i686 0:2.6.9-5.0.5.EL set to be updated ---> Package gtk2.i386 0:2.4.13-14 set to be updated ---> Package cvs.i386 0:1.11.17-7.RHEL4 set to be updated ---> Package krb5-libs.i386 0:1.3.4-12 set to be updated ---> Package kernel.i686 0:2.6.9-5.0.5.EL set to be installed ---> Downloading header for kernel-devel to pack into transaction set. kernel-devel-2.6.9-5.0.5. 100% |=========================| 340 kB 00:17 http://netflow.cimex.com.cu/centos/RPMS/kernel-devel-2.6.9-5.0.5.EL.i686 .rpm: [Errno -1] Header is not complete. Trying other mirror. Error: failure: RPMS/kernel-devel-2.6.9-5.0.5.EL.i686.rpm from update: [Errno 256] No more mirrors to try.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss