- Discuss - lists.centos.org

Qemu - enabling "bridge mode" for primary physical interface for VMs
by Lists 19 Jan '22

19 Jan '22

I have a physical host with a single physical network adapter. I want to host several VMs on host. (guest1 - guest4) The guest systems are accessible via 192.168.122.* as is the default with qemu/virsh. There are 4 IP addresses being routed to the primary interface on host. I can set up an alias for the NIC and "see" these ip addresses. I understand that it's possible to allow the 4 VM guest systems to each have a "direct" fixed IP address and access the addresses \via the host network adapter, while the host retains its fixed IP. I've been googling like crazy and there is a lot of stale and conflicting information. Has anybody here done this successfully? Host and all guests are running CentOS 8. Thanks. Ben S

3 5

CentOS-announce Digest, Vol 201, Issue 2
by centos-announce-request＠centos.org 19 Jan '22

19 Jan '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0124 Important CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2022:0127 Important CentOS 7 thunderbird Security Update (Johnny Hughes) 3. CEBA-2022:0068 CentOS 7 python-virtualenv BugFix Update (Johnny Hughes) 4. CEBA-2022:0069 CentOS 7 rear BugFix Update (Johnny Hughes) 5. CEBA-2022:0067 CentOS 7 cronie BugFix Update (Johnny Hughes) 6. CEBA-2022:0061 CentOS 7 unzip BugFix Update (Johnny Hughes) 7. CEBA-2022:0062 CentOS 7 x3270 BugFix Update (Johnny Hughes) 8. CEBA-2022:0060 CentOS 7 perl-DBD-Pg BugFix Update (Johnny Hughes) 9. CEBA-2022:0066 CentOS 7 systemd BugFix Update (Johnny Hughes) 10. CEBA-2022:0070 CentOS 7 pki-core BugFix Update (Johnny Hughes) 11. CESA-2022:0063 Moderate CentOS 7 kernel Security Update (Johnny Hughes) 12. CEBA-2022:0156 CentOS 7 openssl BugFix Update (Johnny Hughes) 13. CESA-2022:0162 Important CentOS 7 gegl Security Update (Johnny Hughes) 14. CESA-2022:0063 Moderate CentOS 7 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 18 Jan 2022 13:44:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0124 Important CentOS 7 firefox Security Update Message-ID: <20220118134403.GA30231(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0124 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0124 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 42e22ddc4f5145c86fda06a008ba1415e8c40c3caa32ca21f81ce460fa3e2bf5 firefox-91.5.0-1.el7.centos.x86_64.rpm Source: 37785df2875c5eb6c436ca5e15daab86f16b8bad3c9cd21a246184c5562ec843 firefox-91.5.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 18 Jan 2022 13:44:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0127 Important CentOS 7 thunderbird Security Update Message-ID: <20220118134449.GA30344(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0127 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0127 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 151bddd3018c3cf341e45301fea7e855900839a749c197c0037edde602eaef35 thunderbird-91.5.0-1.el7.centos.x86_64.rpm Source: 91c6a1ec8b49d2f0883bde205114bb7573106a5acd86a2344d652241f7150ee9 thunderbird-91.5.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 18 Jan 2022 13:46:38 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0068 CentOS 7 python-virtualenv BugFix Update Message-ID: <20220118134638.GA30512(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0068 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0068 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 594dfccfe823bf2e7b0b092a49e9599e40606708a101de2e67c467258d6fd21e python-virtualenv-15.1.0-5.el7_9.noarch.rpm Source: 0c59875991139a5551c5cb52320453f97e0aa2010e8c8c6042017aa5dab403e9 python-virtualenv-15.1.0-5.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 18 Jan 2022 13:47:07 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0069 CentOS 7 rear BugFix Update Message-ID: <20220118134707.GA30636(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0069 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0069 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3aa4e1ccd9fd1a78767f931c25659037fc4cc3726f2bf2f979ed6ea52afe1815 rear-2.4-15.el7_9.x86_64.rpm Source: e1576184949c1d191734076de544b41c30b2ddf36ad8caaf7d54d0147177342a rear-2.4-15.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Tue, 18 Jan 2022 13:47:31 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0067 CentOS 7 cronie BugFix Update Message-ID: <20220118134731.GA30753(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0067 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0067 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 64c5a32d35ccc6312c43d89cfee42872bacebecc43ec10e09f90916daedb80da cronie-1.4.11-24.el7_9.x86_64.rpm 87818b04247bfad1a3a5ad6b7d4ba90f571e7df0d267da4a66fd5e1e17409c65 cronie-anacron-1.4.11-24.el7_9.x86_64.rpm d97cce4820b6ef5656963548218f0d4ff9ef7c504f16623dd12d6b73c7cf2e2f cronie-noanacron-1.4.11-24.el7_9.x86_64.rpm Source: 333770ca04522c51d6570c2c4cbae9626937780535d63e6eb113d65680b35e27 cronie-1.4.11-24.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Tue, 18 Jan 2022 13:47:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0061 CentOS 7 unzip BugFix Update Message-ID: <20220118134749.GA30847(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0061 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0061 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 317a76559462ea9c4e676627bc07ad51cdeabb16ed71de9e1006e9136d921666 unzip-6.0-24.el7_9.x86_64.rpm Source: 16f06f851e6a1668c9e28e990a9536ea82252cc958bf4e6c566022a47b3877c8 unzip-6.0-24.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Tue, 18 Jan 2022 13:48:21 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0062 CentOS 7 x3270 BugFix Update Message-ID: <20220118134821.GA30996(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0062 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0062 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 01359f42e5c172df7cebf52260aa08b51811b3cc29728a03a93dc546ffcfd21e x3270-3.3.12ga12-5.el7_9.x86_64.rpm cef919b47e2ac46501512262000f8aa6f2804d306139f51f0a7eb8a4f8443bda x3270-text-3.3.12ga12-5.el7_9.x86_64.rpm 3bea27ba9e28b7b2fc421da397e966e4cec0ae9373ddb86b7cee9186fcc5ec16 x3270-x11-3.3.12ga12-5.el7_9.x86_64.rpm Source: 2024f89e7f2bacd5934da77791c9773cfef30570a4b6dd2069ec7346ffc85155 x3270-3.3.12ga12-5.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Tue, 18 Jan 2022 13:48:46 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0060 CentOS 7 perl-DBD-Pg BugFix Update Message-ID: <20220118134846.GA31101(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0060 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0060 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 4cd8e9cddd54af538fc6e1a395c1cb5338b2616fac4687ec3606a53441b3b88d perl-DBD-Pg-2.19.3-5.el7_9.x86_64.rpm a42f0d2d5c250a9f3a20b0d1766de040990c5ff04917d87601eb5ecaca50cc8b perl-DBD-Pg-tests-2.19.3-5.el7_9.x86_64.rpm Source: 4a4e7ed53e63974b09ded0ff47a790a9c791266fa949cc2b88a303a20bf64016 perl-DBD-Pg-2.19.3-5.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Tue, 18 Jan 2022 13:51:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0066 CentOS 7 systemd BugFix Update Message-ID: <20220118135100.GA31356(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0066 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0066 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: de11efb648c50dca4022b29c14b4bc06fdcb8f36be5009d20018c917583af9bc libgudev1-219-78.el7_9.5.i686.rpm 1ee43730cfd6c1751ff45f321c91c0f0965e683e47cb52b91f87ac210ed93c1a libgudev1-219-78.el7_9.5.x86_64.rpm dcccb19275e44c98b220ff45b313949c6d1e421f5326c9e3d8f568c1ae986c15 libgudev1-devel-219-78.el7_9.5.i686.rpm c5512bfc8f5d17195d34252e20dd34ef75e390d9bb8a38b30ba8be4e5c0904ad libgudev1-devel-219-78.el7_9.5.x86_64.rpm 40f5419ef2f5f5628caafd1966853e3ed258c5f6cb1984c8471c853323bd793b systemd-219-78.el7_9.5.x86_64.rpm dd83fab8ff66edc9c2eb4cce6304324d64c9a9f43b6f394c7886c2bbb9f6c689 systemd-devel-219-78.el7_9.5.i686.rpm e18ea59775bba4c1bd311fdb9225cf287d5862c29e8b3199c4ad3bf57a00b83e systemd-devel-219-78.el7_9.5.x86_64.rpm bea5901fa1364aca49ab785c08b8debad25fab28cdc3793bf3925cb1cd91f136 systemd-journal-gateway-219-78.el7_9.5.x86_64.rpm 89ba59bcc18f02cf622a16a2b4485ddbebf2c0e577d2b9cc5b891f7f18b2b729 systemd-libs-219-78.el7_9.5.i686.rpm c39c2b1f50d0ee1b0b3edd4f05c23ffa2f7d0cf847b1f78fc6f36f9f4bb83c8f systemd-libs-219-78.el7_9.5.x86_64.rpm 7a957336373214b86e031556081bbbfea7f560af4a8ad2dbd60475b20bc824d2 systemd-networkd-219-78.el7_9.5.x86_64.rpm de628f3727cacb859cd8375cb35493f4ee9c74aeb3751c1ba0c049341d84eb2e systemd-python-219-78.el7_9.5.x86_64.rpm 53f19e6a64582f844301bdf853863da54891f234bc44dc77426164612697903d systemd-resolved-219-78.el7_9.5.i686.rpm 45631c9c56e97ad1c34577b8df4c774f108693f67b52f45cfe6915a3e3f40208 systemd-resolved-219-78.el7_9.5.x86_64.rpm 5597c86554e7f88c701acbd24766aa87c93c449673c10e38cbd74b8bbf5e84fa systemd-sysv-219-78.el7_9.5.x86_64.rpm Source: 51423b95ac28065a08e2f4b1d74fd31fe1c3c92bc559a993dbf0680e769265cc systemd-219-78.el7_9.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Tue, 18 Jan 2022 13:53:15 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0070 CentOS 7 pki-core BugFix Update Message-ID: <20220118135315.GA31941(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0070 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0070 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b09cfd3f84ca7ac6c285e49ce46e9ee51537af067b1965560dd41d5f82f50dee pki-base-10.5.18-19.el7_9.noarch.rpm 74b69c0cad0206438485f298e20a6d074c6e227e6785bba46afaca709e38ef8b pki-base-java-10.5.18-19.el7_9.noarch.rpm f3d62a8cb0a97c76e6a8d6432f16d9b3f9040d5289f63d709f50a3776efaa8b4 pki-ca-10.5.18-19.el7_9.noarch.rpm 78bf4a4e4e5885b5d88e541e46d3237eddae49bc51b74c8c40c52741b0ce4534 pki-javadoc-10.5.18-19.el7_9.noarch.rpm 5fb4e74677604f4bdb11376b47ccc1642147df00b0cd8d54f349ffc0749a8bf7 pki-kra-10.5.18-19.el7_9.noarch.rpm 3442dd9e3cb39ce1bccd183f239742f4ae9a9499d4772d140b7b2a2c451d5507 pki-server-10.5.18-19.el7_9.noarch.rpm ab37b1d65a0c8a304dddc11c7c15156bfbf447331a7afdff3f2f1c4a7632a7ff pki-symkey-10.5.18-19.el7_9.x86_64.rpm 7fad090d109f3a2e81094996192b76c6a9c2f3dc5bdf9730d806f26705d9ec47 pki-tools-10.5.18-19.el7_9.x86_64.rpm Source: 2e13ed3dbdc34ba95842a7e2d64b791252f866d36881b45b27e734291d6ada50 pki-core-10.5.18-19.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 11 Date: Tue, 18 Jan 2022 13:57:43 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0063 Moderate CentOS 7 kernel Security Update Message-ID: <20220118135743.GA32308(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0063 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2022:0063 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) Source: 0ccd3b419ddb59738ad345ec66203a38f2d42df2f1fb1051807145f2459dbf91 kernel-3.10.0-1160.53.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 12 Date: Tue, 18 Jan 2022 16:02:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2022:0156 CentOS 7 openssl BugFix Update Message-ID: <20220118160200.GA27551(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2022:0156 Upstream details at : https://access.redhat.com/errata/RHBA-2022:0156 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 23e60a3de6f5ccfa5704efa5c39a19b795f04e65312ef6af6e4264233e4fa953 openssl-1.0.2k-24.el7_9.x86_64.rpm 37388f00a7d1fc6d93e26f1ef6a2ace5b99ec8b0ff895e5d156253d00fa59db3 openssl-devel-1.0.2k-24.el7_9.i686.rpm 94cc4c729c9fc12e3385fb74c8004acc5ebf27eed73cae3facf775403d14109e openssl-devel-1.0.2k-24.el7_9.x86_64.rpm c403db828d16aa325941eddc93e7be599767dc0bb4ec3be436c20c8a9ad14744 openssl-libs-1.0.2k-24.el7_9.i686.rpm 9f4028fe73544b73e189e0028f1dae14bb0a141130988e21021ac4cef2074065 openssl-libs-1.0.2k-24.el7_9.x86_64.rpm fc6cceaef55bd37f4fcdef13e567e0f496246d1ef59bd1803f1d77af60ef774a openssl-perl-1.0.2k-24.el7_9.x86_64.rpm eff160acd2825b382858cba77f4f60a433755fd1621b6510f0a8a57dae54a512 openssl-static-1.0.2k-24.el7_9.i686.rpm 0460e382ab0b0ff062ef27fbd07fe4a599aeb4704c295ef0ba4f0c14632a257a openssl-static-1.0.2k-24.el7_9.x86_64.rpm Source: 458bede29a46731dd90310f1fcfc01234f0acf021d9176f6d773cf5c6125ad1e openssl-1.0.2k-24.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 13 Date: Tue, 18 Jan 2022 16:02:33 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0162 Important CentOS 7 gegl Security Update Message-ID: <20220118160233.GA27692(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0162 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0162 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0f6e2c2f22024dd4f9db5cb729bdd2f2744882ba37e965a50b954f861c99243b gegl-0.2.0-19.el7_9.1.i686.rpm 73e2cf9bb12255322e5252ec0b918e3e62d5c6df5b610dd7d2ecf351b34f1365 gegl-0.2.0-19.el7_9.1.x86_64.rpm 666bdeb5237f9bac4020a4b5da35bdc2b27ec3fe6d28b4e3823d1ad165c013b5 gegl-devel-0.2.0-19.el7_9.1.i686.rpm c0c2b524cce50372b06ea8c7a4618f02d379ce6a9cbf9b2a7bbd6e21c4a80dd7 gegl-devel-0.2.0-19.el7_9.1.x86_64.rpm Source: 85bbcb73bc56e294a63a99b3d83dd384a40bd8ec65fbf6d7ffb590b66223a6f4 gegl-0.2.0-19.el7_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 14 Date: Tue, 18 Jan 2022 19:10:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0063 Moderate CentOS 7 kernel Security Update Message-ID: <20220118191027.GA1611(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0063 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2022:0063 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 168cb87176ec6a7a6805dcccc50c34a22945c1ebfd027164ff0028a1a140a637 bpftool-3.10.0-1160.53.1.el7.x86_64.rpm 53452ad31f9655e8f71a0b4c49b118b9337855433c50f25a9f5a75b92ebb8a8a kernel-3.10.0-1160.53.1.el7.x86_64.rpm adf17c4b2070f73fe44e9fc11648947e83c86d37a4e3532c9d77d3d8e9ae50e5 kernel-abi-whitelists-3.10.0-1160.53.1.el7.noarch.rpm 6817bc65309730ab6a1f49ab977c2ea11a9cb5a2f623376008276eeda89f41da kernel-debug-3.10.0-1160.53.1.el7.x86_64.rpm 619978f4cd3319fc56335a010d227ac9446de3fe27758ad4f22319183b1a35bb kernel-debug-devel-3.10.0-1160.53.1.el7.x86_64.rpm d2642493abe4c602af8bd00a8d0954219b93cb84fabd9870230cad39d45b9ee7 kernel-devel-3.10.0-1160.53.1.el7.x86_64.rpm a80e94c28a71146376496e2e9902a431fca968386feb3bcfc1a8b876f55f48ce kernel-doc-3.10.0-1160.53.1.el7.noarch.rpm 4fdc56dc0f2c90e2f3e04a9191f8f4da825b37f6ac25fe246820e255ce02e8a1 kernel-headers-3.10.0-1160.53.1.el7.x86_64.rpm e107c061dd44f2966524c0a39c675a112e3f712a7f1b891c19bc27ddadc6d91b kernel-tools-3.10.0-1160.53.1.el7.x86_64.rpm 6f1bbacef1dc67ded3f5dae9926f3a9422cbb14531e25cbb1668f8ac69d00b8d kernel-tools-libs-3.10.0-1160.53.1.el7.x86_64.rpm 48050d32a9ddb2c79d03c638c04cd306724f7ac310231a77812108d47d170a94 kernel-tools-libs-devel-3.10.0-1160.53.1.el7.x86_64.rpm 70e9899b03ea3d4adef955f81b9ef893b9391bf9f209434d85b8d5254d3b97e0 perf-3.10.0-1160.53.1.el7.x86_64.rpm 3a576a2d4c9d495a81817e62770bc36d792d089f36be65e81f5449f4f304415e python-perf-3.10.0-1160.53.1.el7.x86_64.rpm Source: 0ccd3b419ddb59738ad345ec66203a38f2d42df2f1fb1051807145f2459dbf91 kernel-3.10.0-1160.53.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 201, Issue 2 ***********************************************

1 0

Is shellcheck safe?
by Thomas Stephen Lee 19 Jan '22

19 Jan '22

Hi, I downloaded, extracted, and ran 0.8.0 https://github.com/koalaman/shellcheck/releases After running, I submitted the file to virustotal with the below result. https://www.virustotal.com/gui/file/f4bce23c11c3919c1b20bcb0f206f6b44c44e26… Should I be concerned that I ran the program once? Thanks --- Lee

3 2

chkrootkit---abandoned???
by Fred 19 Jan '22

19 Jan '22

Just tried to check for updated chkrootkit and it appears there haven't been any since 0.53, 3 1/2 years ago. Anybody know if it is now accessible somewhere other than www.chkrootkit.org ?? Thanks in advance! Fred

2 1

Echoing statements in bash script
by H 16 Jan '22

16 Jan '22

Using a bash script I want to echo several strings to a file. The echo statement, however, is in a function and thus indented but I do /not/ want the strings echoed indented in the new file. Is this doable? Here is an example: f () { echo " # this is a test a=123 b=456" > file.txt } File.txt should the contain: # this is a test a=123 b=456 Thus no indentation. It seems that if I prepend each line with \b the line should be backspaced which would work nicely but the echo statement seems to replace a backspace within the quotes to spaces...

2 2

possible issue with CS8 kernel-4.18.0-358.el8.x86_64
by Orion Poplawski 16 Jan '22

16 Jan '22

Is anyone else having any issues with CS8 kernel-4.18.0-358.el8.x86_64? The symptom I'm seeing is not getting the kde screen locker password prompt to show so I can't unlock my screen. I have already rolled back the recent qt5 and xorg updates. Booting into the previous kernel - 4.18.0-348.7.1.el8_5.x86_64 fixes it. No idea what might actually be causing it. -- Orion Poplawski he/him/his - surely the least important thing about me Manager of NWRA Technical Systems 720-772-5637 NWRA, Boulder/CoRA Office FAX: 303-415-9702 3380 Mitchell Lane orion(a)nwra.com Boulder, CO 80301 https://www.nwra.com/

1 0

NFS Share fails to mount at boot time
by Felix Natter 15 Jan '22

15 Jan '22

hello fellow CentOS Users, on Scientific Linux 7 (_very_ similar to CentOS7), I get this when trying to mount NFS Shares (exported from Synology NAS) automatically at boot time: [root@HOST ~]# journalctl -b 0 | grep NAS[20] Jul 01 13:32:09 HOST systemd[1]: Mounting /mnt/NAS0... Jul 01 13:32:09 HOST systemd[1]: Mounting /mnt/NAS2... Jul 01 13:32:09 HOST systemd[1]: mnt-NAS0.mount mount process exited, code=exited status=32 Jul 01 13:32:09 HOST systemd[1]: Failed to mount /mnt/NAS0. Jul 01 13:32:09 HOST systemd[1]: Unit mnt-NAS0.mount entered failed state. Jul 01 13:32:09 HOST systemd[1]: mnt-NAS2.mount mount process exited, code=exited status=32 Jul 01 13:32:09 HOST systemd[1]: Failed to mount /mnt/NAS2. Jul 01 13:32:09 HOST systemd[1]: Unit mnt-NAS2.mount entered failed state. I read that enabling NetworkManager-wait-online.service can mitigate that, but it's already enabled: [root@HOST ~]# systemctl list-unit-files|grep wait chrony-wait.service disabled NetworkManager-wait-online.service enabled plymouth-quit-wait.service disabled /mnt/NAS2 is defined in /etc/fstab (/mnt/NAS0 is mounted analogously): NAS2HOST:/volume1/export/ /mnt/NAS2 nfs rw,vers=3,soft,bg,intr 0 0 This does not always occur, and it seems to be a race condition, because it did not occur a few months ago, before we moved offices (when only the networking changed slightly). Of course, once the computer is booted, I can always mount the shares without problems. Does someone have an idea? Many Thanks and Best Regards, -- Felix Natter

3 4

Possible openssl-1.0.2k-23.el7_9 issue
by Johnny Hughes 14 Jan '22

14 Jan '22

I am working to release an update set for CentOS Linux 7, it contains openssl-1.0.2k-23.el7_9, which has this bug reported: https://bugzilla.redhat.com/show_bug.cgi?id=2039993 There is also this article: https://access.redhat.com/solutions/6637201 (requires an access.redhat.com subscription) The current update set is currently in QA testing. It may fail and not be able to be released .. in which case we wouuld remove openssl and try again to get it to pass tests. I just wanted to get this out there in case anyone has issues. Thanks, Johnny Hughes

1 1

389-ds packages less up-to-date on CentOS Stream 8 than RHEL8
by Mathieu Baudier 14 Jan '22

14 Jan '22

Hello, as described here [1] we were having issues with LDAP dirsrv 389-ds in our environment where we use a mix on CentOS Stream 8 and RHEL 8 deployments. I have been surprised to notice that RHEL packages actually seems to be more up-to-date than CentOS Stream ones, while we are working for our QA processes under the assumption that CentOS Stream is upstream of RHEL. Looking at the package versions: ## RHEL 8 $ sudo dnf info 389-ds-base Name : 389-ds-base Version : 1.4.3.23 Release : 12.module+el8.5.0+13329+4096c77a $ sudo rpm -q --changelog 389-ds-base * Thu Nov 18 2021 Mark Reynolds <mreynolds(a)redhat.com> - 1.4.3.23-12 ## CentOS Stream 8 $ sudo dnf info 389-ds-base Name : 389-ds-base Version : 1.4.3.23 Release : 10.module_el8.5.0+946+51aba098 $ rpm -q --changelog 389-ds-base * Thu Aug 26 2021 Mark Reynolds <mreynolds(a)redhat.com> - 1.4.3.23-10 My understanding from discussion on this mailing-list a few months ago, is that sometimes critical issues will be patched in RHEL before CentOS Stream, which is understandable. But is it to be expected that there can be a lag of many months before CentOS Stream "catches up"? Is it recommended to use CentOS Stream for development and testing of the upcoming RHEL updates? Just to be clear, as a (tiny) Red Hat Partner, we have access to enough RHEL NFR entitlements for such purposes, so the point here is not to get something "for free", but to "see things coming" by developing and testing primarily on CentOS Stream. (Which, by the way is working great, except for these recurring 389-ds and IPA issues; I have also been using it as my workstation for months without a glitch) Thanks in advance for (constructive) comments, and for sharing your own experience! Cheers, Mathieu [1] https://lists.centos.org/pipermail/centos/2021-November/534847.html

2 3

Kernel live patching on CentOS Stream 9
by Gionatan Danti 14 Jan '22

14 Jan '22

Dear all, is kernel live patching working for CentOS Stream 9? I know that I can enable it via cockpit or the command line, but are kernel patch files really available or do they require an active RHEL subscription? Thanks. -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.danti(a)assyoma.it - info(a)assyoma.it GPG public key ID: FF5F32A8

7 16

HP Microserver Gen 10+ video RHEL8
by Jon LaBadie 14 Jan '22

14 Jan '22

I'm considering using an HP Proliant Microserver Gen 10+ with a Xeon processor. With the lower level Pentium processor, the CPU and chipset include Intel 610 graphics. But I can not find any info on any builtin video capability of the Xeon provisioned models. Has anyone used these models with Stream (8 or 9) and can describe the video capability? I'd like to do basic X-windows for the occasional GUI admin tool. Thanks, Jon -- Jon H. LaBadie jcu(a)labadie.us

2 1

rd.lvm.lv on CentOS Stream 9 (first-boot failure)
by Gordon Messmer 14 Jan '22

14 Jan '22

I've install a CentOS Stream 9 system from a kickstart file that specified (among other things) several logical volumes: logvol / --fstype="ext4" --size=10240 --name=lv_root --vgname=VolGroup logvol /var --fstype="ext4" --size=4096 --name=lv_var --vgname=VolGroup logvol swap --fstype="swap" --size=2048 --name=lv_swap --vgname=VolGroup When that system rebooted, the kernel args did specify "rd.lvm.lv=VolGroup/lv_root rd.lvm.lv=VolGroup/lv_swap", but did not specify "rd.lvm.lv=VolGroup/lv_var", so boot failed because the filesystem required for /var couldn't be found. The dracut.cmdline documentation does record that it will only activate the LVs given as "rd.lvm.lv", but I'm confused about several things. 1: The system also includes a volume group named "BackupGroup" and that group activates on boot (post-dracut). Why are those LVs activated when rd.lvm.lv is specified? 2: Why didn't Anaconda add the "var" LV to the kernel arguments? 3: This seems like a change from earlier releases, but I can't find any documentation to that effect. Under CentOS 7, after dracut had finished, the remaining logical volumes in that group would be activated. Because they aren't, currently, libvirtd cannot start any of its guests until I manually activate the group. How can I restore the old behavior of activating all of the LVs on boot?

2 2

Moving from mdadm raid 0 to single disk
by Alexandre Leonenko 12 Jan '22

12 Jan '22

Hey all, Hopefully a quick question. I'm going to move the filesystem of a raid 0 mdadm to a single disk. The filesystem is just a data drive, can I just dd if=/dev/md0 of=/dev/sdc ? Or should I rather rsync the files directly? Regards, Alex

3 4

systemctl hoses eth port settings
by allan emord 10 Jan '22

10 Jan '22

Hi all, I recently added 2 eth ports to C7 machine via USB adapters. Set up devices with Settings - Network . While cables (and target devices) are installed, running `systemctl restart network` worked OK. If one of the devices loses connectivity (e.g. uplug eth cable) `systemctl restart network` will mix up the device assignments thereby losing connectivity to host. e.g. enp7s0, the PCI network card, gets set to parameters that belong to one of the USB adapters. This is not desired behavior. Is there something I have done incorrectly? I this normal behavior? I have looked at the scripts for if[up|down], and if run manually, works well to re-configure the enp7s0 interface but (apparently) systemctl does not use these scripts. Thanks for your consideration. Allan

1 0

Is my ssh private key already unlocked?
by Robert Nichols 10 Jan '22

10 Jan '22

When I first ssh to a system, I am asked for the password to unlock the private key file. Thereafter, that key file remains unlocked, and subsequent ssh sessions will not prompt for a password. I can always re-lock the key file by running "ssh-add -D". In a script I have that runs sshfs to mount a remote directory, I want to re-lock that key file _unless_ it was already unlocked, i.e., if I sshfs asks for a password, I want to re-lock the key file immediately after the command is run. How can I determine ahead of time whether the key file is already unlocked? In the past (Centos 6) I could examine the output from "ssh-add -l" determine that. Now, "ssh-add -l" just shows the public key whether of not the private key has been unlocked. There is also no apparent way to see whether or not sshfs asked for a password. Suggestions? -- Bob Nichols "NOSPAM" is really part of my email address. Do NOT delete it.

2 2

printing on C8S
by Fred 08 Jan '22

08 Jan '22

OK, I give up. How do I configure a printer on Centos 8 Stream? I can't find any tools for doing that. further, there doesn't seem to be a cups executable (which should allow setting up a printer) though there ARE a bunch of cups packages installed. Anyone got any clues for me? Thanks in advance! Fred

6 7

Re: [CentOS] Is CentOS-Stream-9-20211222.0 suitable for building for RHEL9
by Simon Matter 06 Jan '22

06 Jan '22

> On 1/5/22 05:06, Leon Fauster via CentOS wrote: >> Am 05.01.22 um 11:02 schrieb Simon Matter: >>> Hi, >>> I have to port/build quite a number of packages for upcoming RHEL9. I thought about starting to do so now on CentOS-Stream-9-20211222.0 in the >>> hope that I don't have to redo a lot of the work again later for the released RHEL9. >>> Does it sound like a good idea to start now or should I better wait a bit? >> I'm already doing that. Do just expect everything that also happened in EL8. Missing devel or sub packages. Striped down s/rpm macros that blocks building fedora packages directly. So, business as usual. BTW, some packages are not in streams anymore. This makes custom overlay >> repos a bit easier ... > I think you can build directly against the repos in the centos stream koji. > https://kojihub.stream.centos.org/kojifiles/ We're not using koji so I don't know how I could make use of these repos. I've done a number of the easier builds now and they went well. Now I'm trying to build a package which requires imake but I can't find it anywhere. I guess imake could be missing because the Xorg stuff is being built without it today? Does anybody know if imake is still used but not shipped or is it not used and built for EL9 anymore? Thanks, Simon

2 3

Is CentOS-Stream-9-20211222.0 suitable for building for RHEL9
by Simon Matter 05 Jan '22

05 Jan '22

Hi, I have to port/build quite a number of packages for upcoming RHEL9. I thought about starting to do so now on CentOS-Stream-9-20211222.0 in the hope that I don't have to redo a lot of the work again later for the released RHEL9. Does it sound like a good idea to start now or should I better wait a bit? Thanks, Simon

3 2

CentOS-announce Digest, Vol 201, Issue 1
by centos-announce-request＠centos.org 05 Jan '22

05 Jan '22

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2022:0003 Important CentOS 7 xorg-x11-server Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 4 Jan 2022 19:22:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2022:0003 Important CentOS 7 xorg-x11-server Security Update Message-ID: <20220104192229.GA29860(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2022:0003 Important Upstream details at : https://access.redhat.com/errata/RHSA-2022:0003 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 99b661c96e07cf126304451e9aa41291a49a8f3fc0d29d14dabcfb939072586f xorg-x11-server-common-1.20.4-17.el7_9.x86_64.rpm c9dc78f6c0e94a26844ea7d1aa7fbde598ea704957ae7b657c4a63c822bd9f21 xorg-x11-server-devel-1.20.4-17.el7_9.i686.rpm e58d4578833550c574d220588395dd2ff7fdabaa1bd5e48a04c31911a6caca8a xorg-x11-server-devel-1.20.4-17.el7_9.x86_64.rpm 1c3887c7641e7d177a4556fa5d66b74cca92bdb865265509120154804c5ddeab xorg-x11-server-source-1.20.4-17.el7_9.noarch.rpm 2bfd2b5c14b17c0e7510240064a110b33c36b377955ad7f1245005118f4dc0aa xorg-x11-server-Xdmx-1.20.4-17.el7_9.x86_64.rpm 5ef15604ff8baa8611a443eb38e948c0561633200d60d93d6ec70aafe375876e xorg-x11-server-Xephyr-1.20.4-17.el7_9.x86_64.rpm 822adbeedf758cb1febec29ff177d207923b6e3c24749077ca4f3a684d593d1c xorg-x11-server-Xnest-1.20.4-17.el7_9.x86_64.rpm d222b43a6c9a83d63e9c529e8e528b248aa0f77b4b23e5e7256d32c1a64bee44 xorg-x11-server-Xorg-1.20.4-17.el7_9.x86_64.rpm de6d7edb575cf2c912b54349020bb0c64b19b18869c865f5da30ef088e3cad85 xorg-x11-server-Xvfb-1.20.4-17.el7_9.x86_64.rpm 0e2842a9ef72de0a39b188244266ec36bb5efee89dbbb26d2d9b8832fdb44b78 xorg-x11-server-Xwayland-1.20.4-17.el7_9.x86_64.rpm Source: aa1a69ecf74614ebb737bde9186deba20abe9762fb94a74fb703cdbd4d750eb1 xorg-x11-server-1.20.4-17.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 201, Issue 1 ***********************************************

1 0

how to clear out /var/cache?
by Fred 04 Jan '22

04 Jan '22

Is it safe to just remove files from /var/cache on a running system, or is there a correct procedure for doing that? Mine has hit over 3 gigs, making it one of the larger directories in /, which is running low on space. I've hit all the low-hanging fruit I can find and now I come to things like /var/cache, and I don't know what to do about such. Thanks in advance! Fred

8 9

Re: [CentOS] how to clear out /var/cache?
by Fred 31 Dec '21

31 Dec '21

Skylar: that's more or less what I've been doing, looking for huge things in /. Kenneth: the latest version of kdirstat appears to now be named qdirstat, no kde bits required. it is certainly a handy way to quickly find the disk space sinks. Thanks for the pointer. but I still don't know the proper way to clear out a lot of this stuff. I certainly don't want to hose my system. It is C7, up to date, and it has been running for at least five years with partitions as they are set now: / is 50 gigs. had a popup message this morning telling me that / was nearly full. found it with 2 gigs free. sounds as if something has been slowly eating away at the space. I could use gparted to rearrange things, making / bigger, but as it has been going for five years, it strikes me that it more likely needs a lot of garbage collection to be done. I've manually cleaned up some detritus, it now reports 3.7G free which should hold me for a little while. So, can anyone advise me on what is and what is not safe to whack/delete from the root partition? Thanks! Fred On Thu, Dec 30, 2021 at 7:16 PM Kenneth Porter <shiva(a)sewingwitch.com> wrote: > --On Thursday, December 30, 2021 6:20 PM -0500 Fred <fred.fredex(a)gmail.com> > > wrote: > > > Mine has hit over 3 gigs, making it one of the larger directories in /, > > which is running low on space. I've hit all the low-hanging fruit I can > > find and now I come to things like /var/cache, and I don't know what to > do > > about such. > > Have you run KDirStat to find the disk pigs? I regularly use its Windows > derivative, WinDirStat. > > <http://kdirstat.sourceforge.net/> > <https://windirstat.net/> > > I wish there was a web-based version for headless servers without X > libraries. > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos >

3 2

Delete local user/group but not LDAP one
by Felix Natter 30 Dec '21

30 Dec '21

Dear fellow linux users, I have a computer with a local user X that shadows an LDAP user of the same name (and group). I know I can use: userdel X groupdel X but how do I make sure that the LDAP is not changed, and only the local user/group is deleted? This is very critical. Many Thanks and Best Regards, -- Felix Natter

5 9

issue with virt-install and CS9 boot iso
by Leon Fauster 29 Dec '21

29 Dec '21

I wanted quickly spin up a CS9 system with an virt-install command line that in the past worked with fedora34 and C8 but I am getting following error: ERROR Error validating install location: Could not find an installable distribution at URL '{trimmed path}CentOS-Stream-9-20211222.0-x86_64-boot.iso' Some search engines found some sites that are giving examples to pass locations of kernel and initrd. Are the iso files "wrongly" created or are such parameters required now? Host: CS8 virt-install -n c9x86-parttest -r 3072 --disk path=parttest.img,size=18,format=qcow2 -l CentOS-Stream-9-20211222.0-x86_64-boot.iso --os-variant rhel9.0 --noautoconsole -x "inst.ks=https://example/parttest.cfg" -- Leon

2 2

Roundcubemail
by TE Dukes 28 Dec '21

28 Dec '21

Hello, Just upgraded from CentOS 7 to CentOS 8 Stream and there is no rpm for roundcubemail. Could I get the SRPM for CentOS 7 and re-do it for CentOS 8? I really hate installing a non-RPM package. If not a good idea, what is available for webmail in CentOS 8 Stream? TIA

4 3

Reward
by Imonifegwo Ann 28 Dec '21

28 Dec '21

Good evening I have recieved a card in one of my purchased items that implies that I am eligble for a free gift of my chose. Choosing from either a nintendo switch case or an amazon gift card. And I would gladly like to recieve the amazon gift card as my free gift. May you please get back to me as soon as possible so I could gladly claim my reward. Thank you

1 0

CentOS 7 on Dell after update and reboot running at HZ not Mhz
by Jerry Geis 23 Dec '21

23 Dec '21

I have a Dell R320 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-2403 0 @ 1.80GHz stepping : 7 microcode : 0x71a cpu MHz : 176.550 Running this: cpupower frequency-set -g performance cpu MHz : 180.834 ONly changed to this. What on earth is making this machine run sooo slow ??? Its OFF by a factor of 10 - it should be 1800 mhz Thanks, Jerry

2 1

CentOS 7: gdm/Xorg logs flooding, disk full
by wwp 22 Dec '21

22 Dec '21

Hello there, yesterday my main hdd, hosting a CentOS 7 system, went full.. I could figure out what happened: /var/log/Xorg.0.log and /var/log/gdm/:0.log files were both enormous (several GB each), flooded with messages like that: (Xorg's log excerpts) Auth name: MIT-MAGIC-COOKIE-1 ID: 441 [ 18.958] AUDIT: Wed Dec 22 16:18:19 2021: 3999: client 1 disconnected [ 18.960] AUDIT: Wed Dec 22 16:18:19 2021: 3999: client 1 connected from local host ( uid=0 gid=0 pid=4552 ) (gdm's log excerpts) Auth name: MIT-MAGIC-COOKIE-1 ID: 441 AUDIT: Wed Dec 22 16:18:19 2021: 3999: client 1 disconnected AUDIT: Wed Dec 22 16:18:19 2021: 3999: client 1 connected from local host ( uid=0 gid=0 pid=4552 ) Meanwhile, I restarted the X session (and removed old big logs), but I see the logs growing again. This could happen after a yum-update that day or could be caused by something else. Does anybody have a clue? Regards, -- wwp https://useplaintext.email/

1 0

firewalld: removing rich-rules based on its own list fails
by patrick+centos.org＠laimbock.com 22 Dec '21

22 Dec '21

Hi, I have some ansible roles which each create some firewalld rich-rules. For ansible idempotency I tried to remove any dns related rich-rules before creating the ones in the playbook. After some searching I came up with this: #!/bin/bash OLDIFS=$IFS IFS='' while read -r line; do firewall-cmd --zone=public --permanent --remove-rich-rule=\'$line\'; done <<< $(firewall-cmd --zone=public --list-rich-rules | egrep 'dns|53') IFS=$OLDIFS But this fails with for example: Error: INVALID_RULE: internal error in _lexer(): rule family="ipv4" source NOT address="46.23.XX.0/24" forward-port port="53" protocol="udp" to-port="60053" to-addr="46.23.XX.53" My googling & variations came up empty. Anyone know why this is failing and could possibly share how to make this work? Thanks! Best, Patrick

2 2

CentOS-announce Digest, Vol 200, Issue 5
by centos-announce-request＠centos.org 22 Dec '21

22 Dec '21

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2021:5014 Important CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2021:5206 Moderate CentOS 7 log4j Security Update (Johnny Hughes) 3. CESA-2021:5206 Moderate CentOS 7 log4j Security Update (Johnny Hughes) 4. CESA-2021:5195 Moderate CentOS 7 ipa Security Update (Johnny Hughes) 5. CESA-2021:5192 Important CentOS 7 samba Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Dec 2021 00:04:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:5014 Important CentOS 7 firefox Security Update Message-ID: <20211214000422.GA22530(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:5014 Important Upstream details at : https://access.redhat.com/errata/RHSA-2021:5014 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8c0eff6015d46baf10cb337069eb8d7100741d665dddd559e9e053509293cad7 firefox-91.4.0-1.el7.centos.i686.rpm 903e1d0ede27725fa4cc5c201b48de10f5cbd5f90594a9cb1c3a7e06037b2fe0 firefox-91.4.0-1.el7.centos.x86_64.rpm Source: 40e02750aa7d9f9eaefaecff30b0f7bb0f5c4d534f28b90ebb6c424720cf222e firefox-91.4.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 21 Dec 2021 21:36:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:5206 Moderate CentOS 7 log4j Security Update Message-ID: <20211221213617.GA7863(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:5206 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2021:5206 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 21 Dec 2021 21:36:37 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:5206 Moderate CentOS 7 log4j Security Update Message-ID: <20211221213637.GA7982(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:5206 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2021:5206 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: cbc27f39937173e8134e59deb6baac91cea3e9497f76d2e139b4eb64bc1aade3 log4j-1.2.17-17.el7_4.noarch.rpm 9c006d26a3fc490337a403596c661c5f56ddf827bc6cbd0f2da8d9f0c325eeb9 log4j-javadoc-1.2.17-17.el7_4.noarch.rpm 6f168ecee0a2bbae92e0564565c3d22e1bae72f64557c32569a7bffd94b76ca4 log4j-manual-1.2.17-17.el7_4.noarch.rpm Source: bf4b560a10d0de496a8506c2f30116b123a5423345422da9eb2369a56655d13b log4j-1.2.17-17.el7_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 21 Dec 2021 21:37:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:5195 Moderate CentOS 7 ipa Security Update Message-ID: <20211221213758.GA8264(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:5195 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2021:5195 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ff13cc6851b7555532b91dc5f8a9c7b73fb8f47f0f39be06ad101f6250c679c5 ipa-client-4.6.8-5.el7.centos.10.x86_64.rpm 779491f4aff62cb66747a794b7b823e9645eed730e157ff87a8425bfd96871c9 ipa-client-common-4.6.8-5.el7.centos.10.noarch.rpm 9a646552f12a087de4493fe8a4dfec0a5fb87521f568758c6136443c9644c22f ipa-common-4.6.8-5.el7.centos.10.noarch.rpm 47f19899e75c7c9a5b74f30643d69d0ccff2cf5451546d7ad1a727bccaaf0ea4 ipa-python-compat-4.6.8-5.el7.centos.10.noarch.rpm ac419246df9921713ed1c65bf7621fa6b5266999545f33a73aab328bcd38d3f0 ipa-server-4.6.8-5.el7.centos.10.x86_64.rpm 505e596b1b77d05f545fd3684fbdd8591bf9ca308db67ff0a6b36dd0a1341c17 ipa-server-common-4.6.8-5.el7.centos.10.noarch.rpm 878d2dbcd884adb9e2de690242d04710df89bee67b51aa86e9468e01de78341b ipa-server-dns-4.6.8-5.el7.centos.10.noarch.rpm 58790e773666a310f1c4417f46de1fb127437bce225ed0d9cbf6b4a08054ae98 ipa-server-trust-ad-4.6.8-5.el7.centos.10.x86_64.rpm 341b7f6c5352eee2a98665ce78feaf6c4a52626e0322ce9b65c82f9e08190f7e python2-ipaclient-4.6.8-5.el7.centos.10.noarch.rpm 55921bf220651db8e53c670393336486760efc2eb102ac7de7bc83f6731698f6 python2-ipalib-4.6.8-5.el7.centos.10.noarch.rpm e568d73cd1ea3df0a67fb17bceeae36b33a91af90d651ab33c4ae492f208ff32 python2-ipaserver-4.6.8-5.el7.centos.10.noarch.rpm Source: cfdc4deb7112fb2ce42791bf940d930732c0ddccbe4d9ac8c29ae83a296dcfb8 ipa-4.6.8-5.el7.centos.10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Tue, 21 Dec 2021 21:39:51 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:5192 Important CentOS 7 samba Security Update Message-ID: <20211221213951.GA8718(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:5192 Important Upstream details at : https://access.redhat.com/errata/RHSA-2021:5192 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9e8882a42b481017ad43c670ac8c75a3a878d804f43f7716f685798813397a3f ctdb-4.10.16-17.el7_9.x86_64.rpm d12d34da150d926afed7f5810b9ebdc562f483d0100cdce78091fd464612301d ctdb-tests-4.10.16-17.el7_9.x86_64.rpm 07502ee4563c4bdc09b8d0b67eba7577aae0d6c871501af53b038aad8812d391 libsmbclient-4.10.16-17.el7_9.i686.rpm e28f306d4893ec7a68589345b053be93e9d807543f263f0bbfd81eacefbc4c10 libsmbclient-4.10.16-17.el7_9.x86_64.rpm b3350c79767fa9a0a0ac49e9e26cb2d6f221c594bddb72ca5a870a8d7661e0f1 libsmbclient-devel-4.10.16-17.el7_9.i686.rpm 36410412b59ca22b5708b34c6f8dafdb38024efff345c20c4dc28c75a7eb8a0a libsmbclient-devel-4.10.16-17.el7_9.x86_64.rpm fe31962a7aaae275d7dcbf9efe7364a94ada762b968513d3d783f9e763f8441b libwbclient-4.10.16-17.el7_9.i686.rpm 3fc9b311cc6984896d03711ca684b967577d4370b4c5b037efe81245cfc9a5f2 libwbclient-4.10.16-17.el7_9.x86_64.rpm 09cd4a65244763f9c5d860969f9294414316cc0b7472539300921b5021a3a048 libwbclient-devel-4.10.16-17.el7_9.i686.rpm 39b34f1245a4dd4e09703d7a8fa93bb27414f909eb7514764f934e9248878ee3 libwbclient-devel-4.10.16-17.el7_9.x86_64.rpm c763f6d47ed5f33b5810818fd094773ac77ca94070088529b832a5189debe293 samba-4.10.16-17.el7_9.x86_64.rpm 4cab2e9389c0bda9927bc8ffb3f5843f6888147fd2ee09109c97a50a8e313dfa samba-client-4.10.16-17.el7_9.x86_64.rpm 594bfd4b3bb5ccb47a34df5c0220769ae40a50c53152652adbcf1803d747d0f3 samba-client-libs-4.10.16-17.el7_9.i686.rpm 5d4abbc89df8da961aa64935f5a986b89626f1f1e99a8728467557a6b761decf samba-client-libs-4.10.16-17.el7_9.x86_64.rpm ac7d75cd25f6bfa86cdc28cc1059d66db9ae1f53bd0df0d2e026116587b508b0 samba-common-4.10.16-17.el7_9.noarch.rpm 21fa1a95375af231395873580adb9f748d65f91c14f7835244aed1cbf60db644 samba-common-libs-4.10.16-17.el7_9.i686.rpm 46b7ac1c6e8834a1d46051b922ee8bd78569b89c91a40bac7b9886b7f75ed974 samba-common-libs-4.10.16-17.el7_9.x86_64.rpm 1fb9ef577f0e9e4a896981792189019932788dd1325084e83bf11f422ec11e55 samba-common-tools-4.10.16-17.el7_9.x86_64.rpm 793ed94885ccb91d3de9ac0ee3c6ae228181f6d4d90d6c2ba44aeecea596a647 samba-dc-4.10.16-17.el7_9.x86_64.rpm 0c9251da98f68e439285f3e9fe1d2564f460335667000f17d613cca5310aa954 samba-dc-libs-4.10.16-17.el7_9.x86_64.rpm f086e1ae057782a612a9146ab15a673cb1fc1c351507f164527a1561fe1017e1 samba-devel-4.10.16-17.el7_9.i686.rpm 5a74a6ec4e7d6d8944913ada4270edb09c6f3b75a0b4caba77d076c07bc64964 samba-devel-4.10.16-17.el7_9.x86_64.rpm 18cd5d8d39b9aec1631228c86412a11eed902b967a26b6a64c816e4fcccaff89 samba-krb5-printing-4.10.16-17.el7_9.x86_64.rpm 1b20547bbbfca3c83fa9317da6351d845a3f6ee818efb377f5a74fe92ae5a2fd samba-libs-4.10.16-17.el7_9.i686.rpm 4aab05abd1b63222c6aa994c3754ec20a9d3258f4769449d5e105f718ba5f442 samba-libs-4.10.16-17.el7_9.x86_64.rpm b6e908a5877e75ecf0c9f0d2e6230660232dc1176edac5fab3ea2fc7d9185753 samba-pidl-4.10.16-17.el7_9.noarch.rpm 622141e5636c218b10a59ecdbd66106cdad2a25b673f891edc0d4b61ac7965f8 samba-python-4.10.16-17.el7_9.i686.rpm fcfcf89049ecf9f09cbf47f552ddb936bf74e4cd3537825f1c463ce4d4d50c66 samba-python-4.10.16-17.el7_9.x86_64.rpm 0c6ad74477b64388fb061cd59308e5053fb53c352648ac10728050169bb9ac48 samba-python-test-4.10.16-17.el7_9.x86_64.rpm a7a8c48658f7054decf6176a5bd02e2d560ad065376f79744ce3f8843e7b5f6f samba-test-4.10.16-17.el7_9.x86_64.rpm bcabaf0d5da539b375bef6f5b408b4c4ec6fb3c207f79f771b9a4349431144f7 samba-test-libs-4.10.16-17.el7_9.i686.rpm bf842b8211bed6cacf365fa45198ae4376c511311e8e65daff8a87231424ed8f samba-test-libs-4.10.16-17.el7_9.x86_64.rpm 9aaf0e40133fe06566b60b7c5045d71204f986d2fb7aef8c6375d03c80b89120 samba-vfs-glusterfs-4.10.16-17.el7_9.x86_64.rpm dfa0087b709a643d5c0cd08f474c7f4e2246be49e0ed748ef007f5903a31b544 samba-winbind-4.10.16-17.el7_9.x86_64.rpm 4985ef8243b405acb259897280bebdf83951ffe71af3db3fcf8140797602544b samba-winbind-clients-4.10.16-17.el7_9.x86_64.rpm 0adc9fe4603e83cc02d7181487b5982803e7d1ac319a09428f7f62c4b74d8d3d samba-winbind-krb5-locator-4.10.16-17.el7_9.x86_64.rpm e2f69cb9ce06dc6e440ee55d4de796bbf6daa032c04f11a93e33ceae0d79eb9c samba-winbind-modules-4.10.16-17.el7_9.i686.rpm 416e2bda192d4d2ef653af8a613b3317548b4dffe2455e834970d920976316a3 samba-winbind-modules-4.10.16-17.el7_9.x86_64.rpm Source: 3ce0ce2c6b7433fe2d4edf538c0687dacdaefc649533a7779a58a8f604757d36 samba-4.10.16-17.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 200, Issue 5 ***********************************************

1 0

lVM looking for a gui running from live-cd
by Ralf Prengel 22 Dec '21

22 Dec '21

Hallo, I m looking for a grafical interface for LVM running from a live cd (centos or other). Background: I not trained in resizing volumes using the cmd. Ralf

1 0

Trouble with CentOS-Stream-GenericCloud-9-20211208.0.x86_64.qcow2
by Orion Poplawski 22 Dec '21

22 Dec '21

I'm trying to test out the CentOS Stream 9 GenericCloud images. I'm installing with: VM_NAME="centos-stream9" USER_DATA="user-data" DISK="CentOS-Stream-GenericCloud-9.x86_64.qcow2" virt-install \ --name "${VM_NAME}" \ --memory 2048 \ --vcpus 2 \ --import \ --cloud-init user-data="${USER_DATA}" \ --os-variant centos-stream9 \ --disk "${DISK}" \ --network network=default,model=virtio \ --graphics none \ --virt-type kvm But I'm ending up with a corrupted disk image, e.g.: # ls -l /var/lib ls: cannot access '/var/lib/unbound': Permission denied ls: cannot access '/var/lib/systemd': Permission denied ls: cannot access '/var/lib/logrotate': Permission denied ls: cannot access '/var/lib/rpcbind': Permission denied ls: cannot access '/var/lib/os-prober': Permission denied ls: cannot access '/var/lib/setroubleshoot': Permission denied ls: cannot access '/var/lib/rsyslog': Permission denied ls: cannot access '/var/lib/dhclient': Permission denied ls: cannot access '/var/lib/kdump': Permission denied ls: cannot access '/var/lib/cloud': Permission denied ls: cannot access '/var/lib/nfs': Permission denied ls: cannot access '/var/lib/chrony': Permission denied total 4 drwxr-xr-x. 2 root root 84 Dec 7 10:24 alternatives drwxr-xr-x. 3 root root 4096 Dec 7 10:23 authselect d?????????? ? ? ? ? ? chrony d?????????? ? ? ? ? ? cloud d?????????? ? ? ? ? ? dhclient drwxr-xr-x. 2 root root 80 Dec 7 10:24 dnf drwxr-xr-x. 2 root root 6 Aug 9 16:40 games drwxr-xr-x. 4 root root 55 Dec 9 22:59 gssproxy drwxr-xr-x. 2 root root 6 Aug 24 10:22 initramfs d?????????? ? ? ? ? ? kdump d?????????? ? ? ? ? ? logrotate drwxr-xr-x. 2 root root 6 Aug 9 16:40 misc drwx------. 2 root root 122 Dec 9 22:59 NetworkManager d?????????? ? ? ? ? ? nfs d?????????? ? ? ? ? ? os-prober drwxr-xr-x. 2 root root 6 Aug 9 22:08 PackageKit drwxr-x---. 3 root polkitd 28 Dec 7 10:22 polkit-1 drwx------. 2 root root 6 Dec 7 10:22 private d?????????? ? ? ? ? ? rpcbind drwxr-xr-x. 2 root root 91 Aug 19 10:39 rpm drwxr-xr-x. 2 root root 6 Dec 7 10:22 rpm-state d?????????? ? ? ? ? ? rsyslog drwxr-xr-x. 5 root root 46 Dec 7 10:22 selinux d?????????? ? ? ? ? ? setroubleshoot drwxr-xr-x. 9 root root 105 Dec 7 10:22 sss d?????????? ? ? ? ? ? systemd drwxr-xr-x. 3 root root 20 Dec 7 10:22 tpm2-tss d?????????? ? ? ? ? ? unbound Is anyone else seeing this? Anything I'm doing wrong? I'm not seeing any error in the boot messages. -- Orion Poplawski he/him/his - surely the least important thing about me Manager of NWRA Technical Systems 720-772-5637 NWRA, Boulder/CoRA Office FAX: 303-415-9702 3380 Mitchell Lane orion(a)nwra.com Boulder, CO 80301 https://www.nwra.com/

1 1

Add Custom Application to Panel causes Mate panel to crash
by Frank Cox 17 Dec '21

17 Dec '21

As with most people who are using Mate on Centos 8, I am using Mate 1.26.0 from https://copr.fedorainfracloud.org/coprs/stenstorp/MATE/ Right-click on the panel, "add to panel" "custom application" The panel crashes. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

2 2

ha.. that might be quite curious..
by lejeczek 16 Dec '21

16 Dec '21

hi guys check this - https://www.servethehome.com/dude-dell-hpe-ami-american-megatrands/ cheers, L

1 0

network bound disk encryption bond interface not working
by Natxo Asenjo 15 Dec '21

15 Dec '21

hi, running 8.5 I cannot get to automatically unlock the luks container on a dell poweredge 740. This is the setup. The clevis client has bound a tang server: # clevis luks list -d /dev/sdb2 1: tang '{"url":"http://10.x.x.200"}' This sdb2 is the boot device. dracut config: kernel_cmdline="bond=bond0:eno1,eno2:mode=4,miimon=100 ip=10.xx.x.1::10.xx.x.254:255.255.255.0::bond0:none " omit_dracutmodules+="ifcfg" After a reboot, I see that the tang server receives a post from this ip, and sends a 200 back: 16:45:02.247838 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 60) 10.xx.x.200.80 > 10.xx.x.1.46374: Flags [S.], cksum 0x391b (incorrect -> 0x0686), seq 2182485757, ack 3195393805, win 28960, options [mss 1460,sackOK,TS val 329378980 ecr 3156670178,nop,wscale 7], length 0 16:45:02.248057 IP (tos 0x0, ttl 63, id 8950, offset 0, flags [DF], proto TCP (6), length 52) 10.xx.x.1.46374 > 10.xx.x.200.80: Flags [.], cksum 0xa58d (correct), ack 1, win 229, options [nop,nop,TS val 3156670178 ecr 329378980], length 0 16:45:02.248191 IP (tos 0x0, ttl 63, id 8951, offset 0, flags [DF], proto TCP (6), length 448) 10.xx.xx.1.46374 > 10.xx.x.200.80: Flags [P.], cksum 0x134d (correct), seq 1:397, ack 1, win 229, options [nop,nop,TS val 3156670178 ecr 329378980], length 396: HTTP, length: 396 POST /rec/BMZ0nj7Ecn79Au8t24041JoChXk HTTP/1.1 Host: 10.xx.x.200 User-Agent: curl/7.61.1 Accept: */* Content-Type: application/jwk+json Content-Length: 230 {"alg":"ECMR","crv":"P-521","kty":"EC","x":"ARUMMnBG_wm8o3KuHk9qnEPbft1M7SMSlHkFHiSD0dDZSegvIZARe8U1V6lsaYZGSJ8mPBvI-NlUUc4yrdF3naaz","y":"ANQwwFFAEzl6UWiDrv37Pr8yTuWdwlDwq_QR0Q9TNP34_fsJAZ-y3oJv0uIoat6KLhPylWTjAY_jJIblOzWhQZpW"} 16:45:02.248215 IP (tos 0x0, ttl 64, id 58644, offset 0, flags [DF], proto TCP (6), length 52) 10.xxx.xx.200.80 > 10.xx.x.1.46374: Flags [.], cksum 0x3913 (incorrect -> 0xa3fb), ack 397, win 235, options [nop,nop,TS val 329378980 ecr 3156670178], length 0 16:45:02.282326 IP (tos 0x0, ttl 64, id 58645, offset 0, flags [DF], proto TCP (6), length 69) 10.xx.x.200.80 > 10.x.x.1.46374: Flags [P.], cksum 0x3924 (incorrect -> 0xe3fa), seq 1:18, ack 397, win 235, options [nop,nop,TS val 329379014 ecr 3156670178], length 17: HTTP, length: 17 HTTP/1.1 200 OK So basically, it should unlock, but it's not unlocking. Does anyone have experience with bond interfaces and nbde on 8/9? TIA. -- regards, Natxo

1 0

log4j cve
by Steve Clark 15 Dec '21

15 Dec '21

Hi List, I see on CentOS 7 it has log4j-1.2.17... Is ok 2 use. I know the CVE was against 2.0 fwd but not knowing if something was backported to 1.2 ? Thanks, Steve -- Stephen Clark NetWolves Managed Services, LLC. Sr. Applications Architect Email Confidentiality Notice: The information contained in this transmission may contain privileged and confidential and/or protected health information (PHI) and may be subject to protection under the law, including the Health Insurance Portability and Accountability Act of 1996, as amended (HIPAA). This transmission is intended for the sole use of the individual or entity to whom it is addressed. If you are not the intended recipient, you are notified that any use, dissemination, distribution, printing or copying of this transmission is strictly prohibited and may subject you to criminal or civil penalties. If you have received this transmission in error, please contact the sender immediately and delete this email and any attachments from any computer. Vaso Corporation and its subsidiary companies are not responsible for data leaks that result from email messages received that contain privileged and confidential and/or protected health information (PHI).

7 9

CentOS 9-stream "CRB" repo
by Chris Adams 15 Dec '21

15 Dec '21

I'm starting to look at CentOS 9-stream... what is the CRB repo? It appears to be a lot of development libraries and such, but I didn't see a definition or "CRB" anywhere. -- Chris Adams <linux(a)cmadams.net>

3 2

something is hammering non-existant floppy
by Jon LaBadie 13 Dec '21

13 Dec '21

On my CentOS7 system, I'm getting message sequences in /var/log/message and in the journal that are nearly identical to the sequence below. They come in multiple times per second. I've deleted the timestamps and system name from the messages. kernel: floppy0: Getstatus times out (0) on fdc 0 kernel: kernel: floppy driver state kernel: ------------------- kernel: now=4476158515 last interrupt=4476158452 diff=63 last called handler=reset_interrupt [floppy] kernel: timeout_message=floppy start kernel: last output bytes: kernel: 8 81 4388061306 kernel: 3 80 4388061326 kernel: d1 90 4388061326 kernel: a 90 4388061326 kernel: 7 90 4388061326 kernel: 0 90 4388061326 kernel: 8 81 4388061730 kernel: 3 80 4388061751 kernel: c1 90 4388061751 kernel: 10 90 4388061751 kernel: 7 80 4388061751 kernel: 0 90 4388061751 kernel: 8 81 4388062074 kernel: 7 80 4388062075 kernel: 0 90 4388062075 kernel: 8 81 4388062399 kernel: 8 80 4402157917 kernel: 8 80 4402213377 kernel: 8 80 4476158452 kernel: 12 80 4476158471 kernel: last result at 4476158452 kernel: last redo_fd_request at 4476158471 kernel: status=0 kernel: fdc_busy=1 kernel: timer_function=ffffffffc01daf70 expires=2957 kernel: cont=ffffffffc01dc400 kernel: current_req=ffff9b0e72239c80 kernel: command_status=-1 kernel: I persume something is trying to access the system's floppy disk drive that does not exist. But I have been unable to identify what's triggering all this activity. Any suggestions? Jon -- Jon H. LaBadie jcu(a)labadie.us

3 4

C9S
by Fred 11 Dec '21

11 Dec '21

Hi! I'm experimenting with C9 Stream, in Virtualbox. I'm hoping someone, somewhere, will provide the Mate desktop for it. I positively cannot stand that Gnome thing that they think we should all be using. I've installed C9 and C9S for epel but they don't have it (yet??) either. Anyone know where I can find it? Thanks in advance! Fred

1 0

Roundcube 1.4.12 on CentOS 8
by Gionatan Danti 10 Dec '21

10 Dec '21

Hi all, I recently updated a CentOS 8 machine to roundcubemail-1.4.12 (from 1.4.11) using remi's repo. I needed to explictly exclude the 1.5.0 packages because it was "shadowing" the latest 1.4.12 release. But now I can not see the 1.4.12 packages anymore - only 1.5.x are provided. Does anyone know why the previous stable package disappeared from remi's repo? Thanks. -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.danti(a)assyoma.it - info(a)assyoma.it GPG public key ID: FF5F32A8

2 2

rpcbind fails to start with IPv6 disabled
by Jack Bailey 09 Dec '21

09 Dec '21

Hello, Does anyone know if this is still an issue? https://access.redhat.com/solutions/2798411 rpcbind fails to start with IPv6 disabled - Red Hat Customer Portal On RHEL7.3 and later with IPv6 disabled, rpcbind fails to start... Thanks, Jack

1 0

Daily Logwatch (Postfix) email being reported as spam
by Jay Hart 09 Dec '21

09 Dec '21

Hi All!!! This issue is a bit beyond my knowledge level/area. Spamassassin is tagging my logwatch emails as spam. The emails range in scores from 3.53 to 6.728. Amavisd is set to 'kill/quarantine' spam that scores 3.14 or higher, and I receive several each day. Note: all other emails that are scored at 3.14 or higher ARE true SPAM. I've checked this out. I know this is caused by the the blacklist checks shown below. What I don't know 'exactly' how to do, is solve this. Example header from one of my emails: Return-Path: <> Delivered-To: spam-quarantine X-Envelope-From: <root(a)kevla.org> X-Envelope-To: <jhart(a)kevla.org> X-Envelope-To-Blocked: <jhart(a)kevla.org> X-Quarantine-ID: <NnUN20KoPwXR> X-Spam-Flag: YES X-Spam-Score: 4.731 X-Spam-Level: **** X-Spam-Status: Yes, score=4.731 tag=2 tag2=3.14 kill=3.14 tests=[NO_RELAYS=-0.001, URIBL_ABUSE_SURBL=1.948, URIBL_BLACK=1.7, URIBL_GREY=1.084] autolearn=no autolearn_force=no What I have done to resolve: I whitelisted the following email addresses/servers: # more /etc/postfix/rbl_allow kevla.org OK # this is the server root(a)kevla.org OK jhart(a)kevla.org OK Modified the following in main.cf: smtpd_client_restrictions = check_client_access hash:/etc/postfix/rbl_allow, permit_mynetworks, permit_sasl_authenticated, reject_unknown_client, permit smtpd_sender_restrictions = check_client_access hash:/etc/postfix/rbl_allow ran 'postmap /etc/postfix/rbl_allow' and restarted the postfix and amavisd services. I was hoping this would resolve but it didn't. For the above URIBL scores, I can see the following scores set in 50_scores.cf. score URIBL_GREY 0 1.084 0 0.424 # n=0 n=2 score URIBL_ABUSE_SURBL 0 1.948 0 1.250 # n=0 n=2 score URIBL_BLACK 0 1.7 0 1.7 # n=0 n=2 Since the URIBL list could be used to detect true legitimate spam, I don't think I want to commit those checks out, at least that doesn't make sense to me. I am at a loss as what the next step is. Should/Could I modify the scores for these associated BLs in 50_scores, and if so, how does one go about setting those? I have been looking to determine how to do this. This would possibly help me without just blocking those BL checks. Also, in Centos 8, what 'runs' the logwatch summary? Assume this is pflogsumm. Does this have a config file for options to tweak the output? I do not have Logwatch analyzer package installed. I have the postfix-perl-scripts package installed. I can't see what kicks this off at night... Lastly, those 'autolearn' and 'autolearn_force' options mentioned in the email header above. Are those configurable to setup (ie set to yes) and again, how to do that, and why would I? Thank you for your time. Jay

2 1

email address
by Wells, Roger K. [US-US] 08 Dec '21

08 Dec '21

How to change email address for this list? current: roger.k.wells(a)leidos.com change to: roger.k.wells(a)alum.mit.edu I've tried several times but so far nothing has worked. thx Roger Wells, P.E. leidos 221 Third St Newport, RI 02840 401-847-4210 (voice) 401-849-1585 (fax)

4 3

CentOS-announce Digest, Vol 200, Issue 4
by centos-announce-request＠centos.org 07 Dec '21

07 Dec '21

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2021:4904 Critical CentOS 7 nss Security Update (Johnny Hughes) 2. CEBA-2021:4797 CentOS 7 qemu-kvm BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 6 Dec 2021 16:52:37 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:4904 Critical CentOS 7 nss Security Update Message-ID: <20211206165237.GA28175(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:4904 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2021:4904 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 62dcb9c05fcad8a7e7f0588dcf5a7500f9fb5e4b2cf0250f64430bd3a95b42f8 nss-3.67.0-4.el7_9.i686.rpm 4631ab28c6b9c4fb1461b0f98b9c1de4c06d08fc1e07b0e42d44f966c8d31507 nss-3.67.0-4.el7_9.x86_64.rpm d1faf007d61466191ae5ad07935839a8673f5e51b6c24bd3465e5503da56f20b nss-devel-3.67.0-4.el7_9.i686.rpm c8da0723eb57ace188d0bd03e37e8827a42913c10542cfa8bd6bd8817a724916 nss-devel-3.67.0-4.el7_9.x86_64.rpm 821ad7280fd9322e235862f73d1cb6c433fe48e14911cbc39141b2df2732bc01 nss-pkcs11-devel-3.67.0-4.el7_9.i686.rpm feb6b437532dab8f5310701ed22fb3134f9e87f87fd7786802bcadba0cdeb3d6 nss-pkcs11-devel-3.67.0-4.el7_9.x86_64.rpm 56f07c39bdea546bc3f3eb930711eb7562fbf0cd8fbcbd9f5e3f7fae8dbf2013 nss-sysinit-3.67.0-4.el7_9.x86_64.rpm e649737e5bf6a5d2b0bb6c20cbdfd046ba295e9f79765fec2800f61f3d408ac0 nss-tools-3.67.0-4.el7_9.x86_64.rpm Source: a3ee82f50a9657766a129497fc125bbf6af82642c5a3dcb4e8c90d08f5075456 nss-3.67.0-4.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Mon, 6 Dec 2021 16:53:40 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2021:4797 CentOS 7 qemu-kvm BugFix Update Message-ID: <20211206165340.GA28325(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2021:4797 Upstream details at : https://access.redhat.com/errata/RHBA-2021:4797 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a56bfb4be6763b8f94a45cd667d3d9e26cc48d8d10f46fa025a15f345484167b qemu-img-1.5.3-175.el7_9.5.x86_64.rpm 4c928cbb9b34a074f2c249f56cfc152f8e285cd974e184b9f5ee05214cbecd42 qemu-kvm-1.5.3-175.el7_9.5.x86_64.rpm 8a1a847b55b0f0c7eb4ee01caaddbacba34459dac20fbc69bf3e33941d234f40 qemu-kvm-common-1.5.3-175.el7_9.5.x86_64.rpm 7b7ec44f73e60f1826d6c1d04e2dd0dcdf55c7db06718558d74313208c397656 qemu-kvm-tools-1.5.3-175.el7_9.5.x86_64.rpm Source: 4036d4578e8287f8befe54308e8fc4af01359744e3335e2a2505951361423282 qemu-kvm-1.5.3-175.el7_9.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 200, Issue 4 ***********************************************

1 0

selinux modules compat
by Leon Fauster 07 Dec '21

07 Dec '21

Hey, after some time not touching any selinux config, I wonder about the bin format of selinux modules. Theoretically question: When I compile some selinux modules on my workstation (el8). Are these modules (forward/backward) compatible for usage on other EL major releases? EL8 mod --deploy2--> EL6, EL7, EL9 -- Thanks, Leon

1 0

CentOS-announce Digest, Vol 200, Issue 3
by centos-announce-request＠centos.org 04 Dec '21

04 Dec '21

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Introducing CentOS Stream 9 (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 3 Dec 2021 09:32:43 -0600 From: Johnny Hughes <johnny(a)centos.org> To: CentOS-Announce <centos-announce(a)centos.org> Subject: [CentOS-announce] Introducing CentOS Stream 9 Message-ID: <26246e8f-6d01-ab19-12d0-7a7b994f4025(a)centos.org> Content-Type: text/plain; charset=UTF-8; format=flowed Rich Bowen has posted a blog entry "Introducing CentOS Stream 9" https://blog.centos.org/2021/12/introducing-centos-stream-9/ More details here: https://centos.org/stream9/ Thanks, Johnny Hughes ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 200, Issue 3 ***********************************************

1 0

CentOS update
by Gionatan Danti 03 Dec '21

03 Dec '21

Dear list, I have an issue updating a CentOS 7.9 machine. A simple "yum update" exists with this error: # yum update --> Running transaction check ---> Package kernel.x86_64 0:3.10.0-1160.36.2.el7 will be erased --> Finished Dependency Resolution ERROR: update failed. Check the log file for details ... Protected multilib versions: libsss_idmap-1.16.5-10.el7_9.11.x86_64 != libsss_idmap-1.16.5-10.el7_9.10.i686 Error: Protected multilib versions: libsss_nss_idmap-1.16.5-10.el7_9.11.x86_64 != libsss_nss_idmap-1.16.5-10.el7_9.10.i686 Trying to update excluding all i686 packages reveal the true issue: an unmet dependency of # yum update --exclude="*.i686" libsss_idmap Resolving Dependencies --> Running transaction check ---> Package libsss_idmap.x86_64 0:1.16.5-10.el7_9.10 will be updated --> Processing Dependency: libsss_idmap = 1.16.5-10.el7_9.10 for package: sssd-client-1.16.5-10.el7_9.10.x86_64 ---> Package libsss_idmap.x86_64 0:1.16.5-10.el7_9.11 will be an update --> Finished Dependency Resolution Error: Package: sssd-client-1.16.5-10.el7_9.10.x86_64 (@updates) Requires: libsss_idmap = 1.16.5-10.el7_9.10 Basically, yum tries to update libsss_idmap to a too new version, not allowed in for sssd-client. I do not use sssd so I can simply uninstall the packages, but I am curious about the unmet dependency. Anyone has the same issue? Regards. -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.danti(a)assyoma.it - info(a)assyoma.it GPG public key ID: FF5F32A8

2 2

CentOS-announce Digest, Vol 200, Issue 2
by centos-announce-request＠centos.org 03 Dec '21

03 Dec '21

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2021:4913 Important CentOS 7 mailman Security Update (Johnny Hughes) 2. CESA-2021:4788 Moderate CentOS 7 krb5 Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 2 Dec 2021 23:53:20 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:4913 Important CentOS 7 mailman Security Update Message-ID: <20211202235320.GA21545(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:4913 Important Upstream details at : https://access.redhat.com/errata/RHSA-2021:4913 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: c990d11d35716ef252caf3630273bd9502a4f8556105b0ee8005c3164ce118df mailman-2.1.15-30.el7_9.2.x86_64.rpm Source: 2ecd2a6efdc51942b93dd42a1132cdbf0499cb488c0bc85068533048df97d594 mailman-2.1.15-30.el7_9.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 2 Dec 2021 23:54:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2021:4788 Moderate CentOS 7 krb5 Security Update Message-ID: <20211202235417.GA21736(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2021:4788 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2021:4788 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ebe9101eafa195e97d5191257396d826d54a03212851b56130c2502068cb8f4c krb5-devel-1.15.1-51.el7_9.i686.rpm 7bddd4fb53bfa9c6ecfb51584e6173525154d1432fdd23c18162b8a5428fd9c2 krb5-devel-1.15.1-51.el7_9.x86_64.rpm 56773da33ba948469db1f7ab9d9bc267d2e29b3458b2d1376573c09525ad4581 krb5-libs-1.15.1-51.el7_9.i686.rpm 03cf1dde125c19d5d48038e69f3552a4973548aa09dc383debd850eec84fa1a4 krb5-libs-1.15.1-51.el7_9.x86_64.rpm 82f169e42c36e9579026a6d56d46f2cbe59221a611192fe96b613ff527e57a1c krb5-pkinit-1.15.1-51.el7_9.x86_64.rpm 9d8090a78aa40baa54d3800a01ae8e374a61c7be5587eb90bc2cf279a1c29e2e krb5-server-1.15.1-51.el7_9.x86_64.rpm 87aee3a9528b247730a778c50eab6e97da58d331049a063fa5f651d993db29d5 krb5-server-ldap-1.15.1-51.el7_9.x86_64.rpm 249e4941a5a5071a668ba290a7dc5e28013fd43206a9a9b2a2a236220aee04dd krb5-workstation-1.15.1-51.el7_9.x86_64.rpm ca2534fe257e28c069b648a161fddd50d841f1df267a98ca33d8ceea488d83c7 libkadm5-1.15.1-51.el7_9.i686.rpm 2d79f11c74a72adcef4f3407e674947b25332958c8d3722a976ffc2d712fb812 libkadm5-1.15.1-51.el7_9.x86_64.rpm Source: 4ee6bbb03ad07c96f8be5eff2b969c4047aa54e62cdd5c972e88cac0a3340e8b krb5-1.15.1-51.el7_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)libera.chat Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 200, Issue 2 ***********************************************

1 0

Microsoft Teams on CentOS 7. Does the latest version work?
by Toralf Lund 03 Dec '21

03 Dec '21

Does anyone else run Microsoft Teams on CentOS 7? I've used it for a while now, and it's generally worked reasonably well. However, after upgrading to the latest version from the Microsoft repos, it doesn't start up properly. Processes start and remain active until I give up and kill them, but I can't see a window or a tray icon or anything. Has anyone else seen this? Is there anything I can do to make the GUI appear? This is not a big deal as everything just works fine if I revert to the previous release, but it would be interesting to know if this is a general problem with the software, or I have some weird issue with my system. The release that doesn't work is 1.4.00.13653. The one that does is 1.4.00.7556. - Toralf

14 31

autofs:: make (and keep) the base mount point --make-shared
by Adrian Sevcenco 03 Dec '21

03 Dec '21

Hi! Does anyone have any idea how can i make the autofs mounts --make-shared? even if i apply on the base mount point (the location where autofs will auto mount things) --make-rshared, this attribute will be lost once autofs acts on that path Thank you! Adrian

1 0

Running Centos 8 Stream: Do I need to remove any of the repos?
by Jay Hart 03 Dec '21

03 Dec '21

Here is a list of the repos I have. As I am now running Centos 8 Stream, should I remove any of the repos below to avoid package versioning issues? # ls -al /etc/yum.repos.d/ total 108 drwxr-xr-x. 2 root root 4096 Nov 15 16:18 . drwxr-xr-x. 152 root root 12288 Nov 28 10:17 .. -rw-r--r--. 1 root root 790 Jun 7 2020 CentOS-AppStream.repo.rpmsave -rw-r--r--. 1 root root 771 Jun 7 2020 CentOS-Base.repo.rpmsave -rw-r--r--. 1 root root 792 Jun 7 2020 CentOS-PowerTools.repo.rpmsave -rw-r--r--. 1 root root 713 Sep 14 21:11 CentOS-Stream-AppStream.repo -rw-r--r--. 1 root root 698 Sep 14 21:11 CentOS-Stream-BaseOS.repo -rw-r--r--. 1 root root 316 Sep 14 21:11 CentOS-Stream-Debuginfo.repo -rw-r--r--. 1 root root 698 Sep 14 21:11 CentOS-Stream-Extras.repo -rw-r--r--. 1 root root 734 Sep 14 21:11 CentOS-Stream-HighAvailability.repo -rw-r--r--. 1 root root 696 Sep 14 21:11 CentOS-Stream-Media.repo -rw-r--r--. 1 root root 718 Sep 14 21:11 CentOS-Stream-PowerTools.repo -rw-r--r--. 1 root root 690 Sep 14 21:11 CentOS-Stream-RealTime.repo -rw-r--r--. 1 root root 748 Sep 14 21:11 CentOS-Stream-ResilientStorage.repo -rw-r--r--. 1 root root 1568 Sep 14 21:11 CentOS-Stream-Sources.repo -rw-r--r--. 1 root root 1485 Sep 4 13:28 epel-modular.repo -rw-r--r--. 1 root root 1564 Sep 4 13:28 epel-playground.repo -rw-r--r--. 1 root root 1422 Sep 4 13:28 epel.repo -rw-r--r--. 1 root root 1584 Sep 4 13:28 epel-testing-modular.repo -rw-r--r--. 1 root root 1521 Sep 4 13:28 epel-testing.repo -rw-r--r--. 1 root root 358 Nov 15 16:18 redhat.repo -rw-r--r--. 1 root root 935 Jul 5 10:00 remi-modular.repo -rw-r--r--. 1 root root 1448 Jul 5 10:00 remi.repo -rw-r--r--. 1 root root 810 Jul 5 10:00 remi-safe.repo Thanks, Jay

5 8

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss