- Discuss - lists.centos.org

[CentOS6] Manually configured Firewall (WLAN-AP plus Router)
by Walter H. 13 Aug '16

13 Aug '16

Hello I've got this Mini-PC https://www.zotac.com/product/mini_pcs/zbox-ci323-nano everything is fine -> latest 6.8 kernel works; both Ethernet-Interfaces work and also the WLAN-Interface works; the two Ethernet-Interfaces are eth0 and eth1 the WLAN-Interface is wlan0 eth1 is connected on ISP side eth0 is connected on my LAN side to a switch; and wlan0 shall also be on my LAN side für wireless and work as an Access-Point (this works) I want both LAN interfaces (eth0 and wlan0) have the same IP subnet so I did this: http://www.microhowto.info/howto/persistently_bridge_traffic_between_two_or… also the DHCP works fine: both DHCP and DHCPv6; RADVd also works fine; in /etc/sysconfig/network-scripts/ I added ifcfg-sit1 with the configuration for my IPv6 tunnel at Hurricane Electric there is the following entry: IPV6TUNNELIPV4LOCAL=ipv4addr here the 1st question: does this have to be the IPv4 address of br0 (LAN) or the one of eth1 (WAN)? (before I had this on a virtual machine, there was only one interface, but here ...?) and now the bigger problem: here just the IP addresses for better troubleshooting; the ISP installed a box (NAT router), that is a medium converter (coaxial cable to ethernet twisted-pair cable), too; this box has on WAN side, my public IP an LAN side it has 192.168.0.1 this box which should be installed instead of my old NAT-router has the following IP addresses on device br0 192.168.1.100 (LAN) and on device eth1 (WAN) 192.168.0.127 the old router has on LAN side 192.168.1.254 and on WAN side 192.168.0.254 now both the new box and the old router are connected "parallel" which means, each is connected with its WAN interfaces to the built-in switch of ISP-box and with its LAN interfaces to my switch; on the old NAT-router I have defined the LAN-IP of the new box as DHCP relay; this works fine; (the new box is the only DHCP server in LAN) <begin /etc/sysconfig/iptables> # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] # ICMP: extra chain -N ALLOWED-ICMP -A ALLOWED-ICMP -p icmp -m limit --limit 1/sec --limit-burst 2 -j ACCEPT # Allow anything on the local link -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT # Allow anything out on the localnet -A OUTPUT -o br0 -j ACCEPT # Allow established, related packets back in -A INPUT -i br0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Enable DHCP -A INPUT -p udp -i br0 --dport 67:68 --sport 67:68 -j ACCEPT # Enable IPv6 -A INPUT -p ipv6 -i eth1 -s 216.66.80.30 -j ACCEPT # Allow SSH from LAN and redirected from internet # from WLAN there should be no SSH possible, so I used eth0 -A INPUT -i eth0 -m tcp -p tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth1 -d 192.168.0.127 -m tcp -p tcp --dport 22 -m state --state NEW -m recent --update --seconds 115 --hitcount 3 --name DEFAULT --rsource -j DROP -A INPUT -i eth1 -d 192.168.0.127 -m tcp -p tcp --dport 22 -m state --state NEW -m recent --set --name DEFAULT --rsource -A INPUT -i eth1 -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # Allow anything out on the internet -A OUTPUT -o eth1 -j ACCEPT # Allow established, related packets back in -A INPUT -i eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow multicast -A INPUT -d 224.0.0.0/4 -j ACCEPT -A OUTPUT -d 224.0.0.0/4 -j ACCEPT # Allow Forwarding on LAN interfaces -A FORWARD -i br0 -o br0 -d 192.168.1.0/24 -j ACCEPT # Allow Forwarding to WAN interface -A FORWARD -i eth0 -o eth1 -s 192.168.1.0/24 -j ACCEPT -A FORWARD -i wlan0 -o eth1 -s 192.168.1.0/24 -j ACCEPT # Allow established, related packets back through -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -i eth1 -o wlan0 -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -i eth1 -o eth0 -j LOG --log-prefix "IP[FWD-Reply]: " --log-level 7 -A FORWARD -i eth1 -o wlan0 -j LOG --log-prefix "IP[FWD-Reply]: " --log-level 7 # Only pings with restricted icmp are allowed -A INPUT -i eth1 -p icmp -j ALLOWED-ICMP # Enable TRACEroute to me -I INPUT -i eth1 -p udp -d 192.168.0.127 --sport 32769:65535 --dport 33434:33523 -j ACCEPT # Enable SSH to me -I INPUT -i eth1 -p tcp -d 192.168.0.127 --dport 22 -j ACCEPT # Log all other -A INPUT -j LOG --log-prefix "IP[IN]: " --log-level 7 -A FORWARD -j LOG --log-prefix "IP[FWD]: " --log-level 7 -A OUTPUT -j LOG --log-prefix "IP[OUT]: " --log-level 7 COMMIT <end /etc/sysconfig/iptables> I have several virtual machines which have configured the old NAT-router als gateway; they all work fine; one virtual machine (OS = Win7) has the new box configured as gateway with IP address 192.168.1.6 I have a old notebook (OS = WinXP) that is "connected" via WLAN to the new box and this has 192.168.1.4 as IP address; both can ping each other the VM and this notebook; here the questions: should I use eth0 and wlan0 or br0 in the iptables and ip6tables roules? why is it possible to ping the VM or the notebook from the new box, but not the other way? Thanks for any help; Greetings, Walter

1 0

Re: [CentOS] LSI SATA MegaRaid & Centos 7 build 1511
by Gordon Messmer 13 Aug '16

13 Aug '16

On 08/13/2016 02:15 AM, Fawzy Ibrhim wrote: > I have double checked again and yes it's Fakeraid from LSI. > Also it's not shown in "lspci -nn" output. In your original message, you indicated that this was a PCI card, but it looks like this is just a firmware component of your motherboard. I think you should assume that this firmware is unsupported. Set your SATA mode to AHCI in the BIOS, and then use "dmraid -r -E" to remove the RAID metadata from those disks: https://bugs.centos.org/view.php?id=9813 You should be able to install using Linux software RAID.

1 0

Re: [CentOS] Linux TCP flaw
by Andrew Dent 12 Aug '16

12 Aug '16

Would a successful attack on the IP address of a VPS in a Plesk environment expose the VPS, the Virtual Host or both (and all other VPSs)? ------ Original Message ------ From: "Johnny Hughes" <johnny(a)centos.org> To: centos(a)centos.org Sent: 12/08/2016 9:08:23 PM Subject: Re: [CentOS] Linux TCP flaw >On 08/12/2016 05:58 AM, Andrew Dent wrote: >> Thanks for the info Peter. >> The VPS is running on a Plesk environment. >> > >Right, and in a Plesk environment there is only one kernel on the main >machine, and all the VPS machines use it. So the hosting provider has >to make all kernel mods. > >

2 1

Firefox crashing
by ken 12 Aug '16

12 Aug '16

This morning, the Firefox (45.3.0) installed (upgrade) just a few days ago has crashed already a half dozen times. Anyone else having the same problem?

3 2

CentOS-announce Digest, Vol 138, Issue 5
by centos-announce-request＠centos.org 12 Aug '16

12 Aug '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Fw: i found the stuff (roland.leurs) 2. Re: Fw: i found the stuff (Johnny Hughes) 3. CESA-2016:1609 Moderate CentOS 6 php Security Update (Johnny Hughes) 4. CESA-2016:1602 Important CentOS 7 mariadb Security Update (Johnny Hughes) 5. CESA-2016:1613 Moderate CentOS 7 php Security Update (Johnny Hughes) 6. CESA-2016:1606 Moderate CentOS 7 qemu-kvm Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Aug 2016 23:47:37 +0300 From: roland.leurs <roland.leurs(a)cis-websolutions.nl> To: "centos-announce" <centos-announce(a)centos.org>, "administratie(a)informatique.nl" <administratie(a)informatique.nl>, "andhra.rampersad" <andhra.rampersad(a)kvk.nl>, "amateurtransfers" <amateurtransfers(a)knvb.nl>, "carata via Marktplaats" <a.1x7ir0ohzgk0i(a)mail.marktplaats.nl> Subject: [CentOS-announce] Fw: i found the stuff Message-ID: <00004af24458$dd2a2ed5$cda39432$(a)cis-websolutions.nl> Content-Type: text/plain; charset="us-ascii" Dear! I know you were looking for this, I found this stuff for you, take a look at <http://above.preparedness.net/e4hqic> roland.leurs

1 0

Re: [CentOS] Linux TCP flaw
by Andrew Dent 12 Aug '16

12 Aug '16

Thanks for the info Peter. The VPS is running on a Plesk environment. ------ Original Message ------ From: "Peter" <peter(a)pajamian.dhs.org> To: centos(a)centos.org Sent: 12/08/2016 3:36:32 PM Subject: Re: [CentOS] Linux TCP flaw >On 12/08/16 17:33, Andrew Dent wrote: >> So after reading this, felt I should apply the fix to a CentOS6 VPS >>that >> I have. >> >>http://www.zdnet.com/article/linux-tcp-flaw-lets-anyone-hijack-internet-tra… >> >> [root@vps ~]# uname -r >> 2.6.32-042stab108.7 > >That's not a CentOS kernel, it's an openvz kernel that is not provided >by CentOS. The fixes and workarounds shown on the internet will not >work with that kernel. > >I suggest you find a better VPS provider, what you have is essentially >a >glorified chroot, not a real VPS and there are many aspects of CentOS >that are simply broken in that model. > > >Peter >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >https://lists.centos.org/mailman/listinfo/centos

2 1

script to make webpage snapshot
by Valeri Galtsev 12 Aug '16

12 Aug '16

Dear Experts, Could someone recommend a script or utility one can run from command line on Linux or UNIX machine to make a snapshot of webpage? We have a signage (xibo) and whoever creates/changes content, likes to add URLs of some webpages there. All works well if these are webpages on our servers (which are pretty fast), but some external servers often take time to respond and take time to assemble the page, in addition these servers sometimes get really busy, and when response is longer than time devoted for that content in signage window, this window hangs forever with blank white field until you restart client. Trivial workaround: just to get snapshot (as, say daily cron job), and point signage client to that snapshot definitely will solve it, and simultaneously we will stop bugging other people servers often without much need for it. But when I tried to search for some utility or script that makes webpage snapshot, I discovered that my ability to search degraded somehow... Thanks for all your pointers! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

6 10

Linux TCP flaw
by Andrew Dent 12 Aug '16

12 Aug '16

Hi So after reading this, felt I should apply the fix to a CentOS6 VPS that I have. http://www.zdnet.com/article/linux-tcp-flaw-lets-anyone-hijack-internet-tra… The article doesn't talk about CentOS or Redhat, but I assume the problem is the same, and hoping the solution is the same. However that doesn't seem to be the case. [root@vps ~]# uname -r 2.6.32-042stab108.7 [root@vps ~]# sysctl -a | grep ack_limit net.ipv4.tcp_challenge_ack_limit = 100 [root@vps ~]# vi /etc/sysctl.conf > Append > net.ipv4.tcp_challenge_ack_limit = 999999999 > to end of file [root@vps ~]# sysctl -p net.ipv4.ip_forward = 0 net.ipv4.tcp_syncookies = 1 error: permission denied on key 'net.bridge.bridge-nf-call-ip6tables' error: permission denied on key 'net.bridge.bridge-nf-call-iptables' error: permission denied on key 'net.bridge.bridge-nf-call-arptables' error: permission denied on key 'net.ipv4.tcp_challenge_ack_limit' [root@vps ~]# sysctl -a | grep ack_limit net.ipv4.tcp_challenge_ack_limit = 100 Am I getting a permission denied because of there is a different solution, or the problem doesn't apply to our VPS or some other reason? Regards Andrew Dent

4 6

how to install opencl on centos 6.7
by qw 12 Aug '16

12 Aug '16

Hi, I'm building x264, and want to use opencl acceleration function. How to install opencl on centos 6.7 to support intel integrated GPUs for 'Intel(R) Xeon(R) CPU E5-2640 v3'? Thanks! Regards andrew

1 0

how to install opencl on centos 6.7
by qw 12 Aug '16

12 Aug '16

Hi, I'm building x264, and want to use opencl acceleration function. How to install opencl on centos 6.7 to support intel integrated cpu for 'Intel(R) Xeon(R) CPU E5-2640 v3'? Thanks! Regards andrew

1 0

Re: [CentOS] script to make webpage snapshot
by Valeri Galtsev 11 Aug '16

11 Aug '16

On Thu, August 11, 2016 5:13 pm, Dave Stevens wrote: > Quoting Valeri Galtsev <galtsev(a)kicp.uchicago.edu>: > >> >> On Thu, August 11, 2016 5:02 pm, John R Pierce wrote: >>> On 8/11/2016 1:46 PM, Valeri Galtsev wrote: >>>> Could someone recommend a script or utility one can run from command line >>>> on Linux or UNIX machine to make a snapshot of webpage? >>>> >>>> We have a signage (xibo) and whoever creates/changes content, likes to add >>>> URLs of some webpages there. All works well if these are webpages on our >>>> servers (which are pretty fast), but some external servers often take time >>>> to respond and take time to assemble the page, in addition these servers >>>> sometimes get really busy, and when response is longer than time devoted >>>> for that content in signage window, this window hangs forever with blank >>>> white field until you restart client. Trivial workaround: just to get snapshot (as, say daily cron job), and point signage client to that snapshot definitely will solve it, and simultaneously we will stop bugging >>>> other people servers often without much need for it. >>>> >>>> But when I tried to search for some utility or script that makes webpage >>>> snapshot, I discovered that my ability to search degraded somehow... >>> >>> many/most webpages these days are heavily dynamic content, a static snapshot would likely break. plus any site-relative links on that snapshot would be pointing to your server, not the original, any ajax code on that webpage would try to interact with your server which won't be running the right back end stuff, etcetc. >> >> I usually am not good at explaining what I need. I really only need an image of what one would see in web browser if one point to that URL. I do >> not care it to be interactive. I also don't want to get the content ("mirror") of stuff that URL points to on variety of "depths" - I don't want to use wget or curl for this reason. That is what I tried first and it breaks with at lest one of the web sites - they do seem protect themselves from "robots" or similar. And we don't need it. We just need to >> show what they page shows today, that's all. >> >> Valeri > > why not File -> Print -> .pdf? This involves a person sitting with open web browser and clicking mouse. I need to do it for a few webpages once a day, as they change daily. I prefer to once spend time on making cron job, and forget about it forever. Hence I need it done from command line. Valeri > > D > >> >>> >>> -- >>> john r pierce, recycling bits in santa cruz >>> >> >> >> ++++++++++++++++++++++++++++++++++++++++ >> Valeri Galtsev >> Sr System Administrator >> Department of Astronomy and Astrophysics >> Kavli Institute for Cosmological Physics >> University of Chicago >> Phone: 773-702-4247 >> ++++++++++++++++++++++++++++++++++++++++ >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> https://lists.centos.org/mailman/listinfo/centos >> > > > > -- > "As long as politics is the shadow cast on society by big business, the attenuation of the shadow will not change the substance." > > -- John Dewey > > > > > ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

5 4

Is "xman" available in any CentOS 6.x repo?
by Kay Schenk 11 Aug '16

11 Aug '16

I know it's old but I miss "xman" in CentOS 6. :( -- -------------------------------------------- MzK "Time spent with cats is never wasted." -- Sigmund Freud

2 1

CentOS 7: System log has repeated lines: Started session 123 of user root.
by therbur 11 Aug '16

11 Aug '16

The system log (/var/log/messages) of a CentOS 7.2 system has frequently-repeated message line pairs like: Jul 18 14:00:01 localhost systemd: Started Session 307 of user root. Jul 18 14:00:01 localhost systemd: Starting Session 307 of user root. where the session number increases each time. Looking around on this, e.g. Red Hat Bugzilla bug 727315, it looks like it's when crond starts a task; it looks like it might be fixed - I would think that would be in CentOS but don't know how to find/compare the Fedora and CentOS systemd versions to know for sure. I found a post on a workaround - in /etc/systemd/system.conf to change the line: #LogLevel=info to: LogLevel=notice I did that and rebooted, and it has stopped the messages. I'm worried though that this may have knocked out something of actual interest from the syslog. So my question is, is there a better way? A way that info messages could go to some other log, or better yet, a way that those particular "session" messages, and only those, could go to some other log or be filtered out?

1 2

Missing announcement for qemu-kvm
by Leonard den Ottolander 11 Aug '16

11 Aug '16

Hello, Received an update for qemu-kvm and qemu-img today, but the corresponding announcement is missing. Haven't received any messages since August 3rd, so there might be other announcements that haven't made it to the list yet. Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

2 2

OT: trying to configure Ubuntu 14 to use dhcp
by m.roth＠5-cent.us 11 Aug '16

11 Aug '16

This is very much *not* CentOS, but if anyone knows how to do it *correctly*, please drop me an email offlist. mark

1 0

Gateway question
by Levente Birta 11 Aug '16

11 Aug '16

Hi There is a Centos 7 up-to-date box with 2 interfaces, let's say 192.168.1.12 - enp2s0, 192.168.1.13 on enp3s0. Default gateway on enp2s0. The gateway is pfsense, IP is 192.168.1.1 with 2 WAN connections On the gateway the outgoing traffic is routed by source ip to different WAN, 192.168.1.12 to WAN1 and 192.168.1.13 to WAN2 On the centos box are set all the route and routing rules: route-enp2s0: 192.168.1.0/24 dev enp2s0 src 192.168.1.12 table t2 default via 192.168.1.1 dev enp2s0 table t2 route-enp3s0: 192.168.1.0/24 dev enp3s0 src 192.168.1.13 table t3 default via 192.168.1.1 dev enp3s0 table t3 rule-enp2s0: from 192.168.1.12/32 table t2 to 192.168.1.12/32 table t2 rule-enp3s0: from 192.168.1.13/32 table t3 to 192.168.1.13/32 table t3 All work when I add #route add default gw 192.168.1.1 dev enp3s0 And that way I have : # ip route show default via 192.168.1.1 dev enp3s0 default via 192.168.1.1 dev enp2s0 169.254.0.0/16 dev enp2s0 scope link metric 1002 169.254.0.0/16 dev enp3s0 scope link metric 1003 192.168.1.0/24 dev enp2s0 proto kernel scope link src 192.168.1.12 192.168.1.0/24 dev enp3s0 proto kernel scope link src 192.168.1.13 But how can I add achieve this only with ip route command ... without route? Can I add this in any config files (ex: route-enp2s0)? Thanks -- Levi

7 19

XRDB not in our centos6.8 build
by Dan Hyatt 10 Aug '16

10 Aug '16

I am a bit baffled on this. We recently rebuilt all our servers to CentOS release 6.8 (Final) from a prior 6.x centos release. We ran into a couple of problems such as Java not working (just had to yum install java). It was installed, but unable to create a java machine, until I yum install java solved the problem. But now a user (the big boss) is receiving xrdp errors. And it appears that xrdp is not installed on these newly built servers. I googled xrdp and was unable to decipher if it is needed in our environment (we use sas which does use X11 graphics on the servers to export graphs). If it is needed, wondering why it not included in the groups we have always used for kickstart. When would I need xrdp? or is it one of the leftovers here from a bygone era? Thanks for your response.

2 1

CentOS-announce Digest, Vol 138, Issue 4
by centos-announce-request＠centos.org 10 Aug '16

10 Aug '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:1585 Moderate CentOS 6 qemu-kvm Security Update (Johnny Hughes) 2. Updated Vagrant Box's are now available : 1607 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 9 Aug 2016 20:30:28 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1585 Moderate CentOS 6 qemu-kvm Security Update Message-ID: <20160809203028.GA15794(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1585 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1585.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e31ec415fe61ba629f3df0854b173a99b106b3c7ce69489fb89d7816e2cbb860 qemu-guest-agent-0.12.1.2-2.491.el6_8.3.i686.rpm x86_64: 3a2e91869b71112d3ebe89f06175ac1a5faefb95fa9acf4d4f172843875b7a91 qemu-guest-agent-0.12.1.2-2.491.el6_8.3.x86_64.rpm 456d98c996030cf3e9337012b245b9023027d75c8aa65cab07a499b77ddefbe6 qemu-img-0.12.1.2-2.491.el6_8.3.x86_64.rpm c9916710560c00b92c4efdd82572ec7c494ad873cfbe6ff810f119fced56e06e qemu-kvm-0.12.1.2-2.491.el6_8.3.x86_64.rpm f0a8a7e166631410c385a1678542abeaa027a4a7d9933222268a6ebbca33a734 qemu-kvm-tools-0.12.1.2-2.491.el6_8.3.x86_64.rpm Source: 90e35bb009e57acb83e6933d8afedac7e04969c5d022ee11462fab0610dd3d3f qemu-kvm-0.12.1.2-2.491.el6_8.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 10 Aug 2016 10:43:34 +0100 From: Karanbir Singh <kbsingh(a)centos.org> To: CentOS Announcements List <centos-announce(a)centos.org> Subject: [CentOS-announce] Updated Vagrant Box's are now available : 1607 Message-ID: <55ded250-f8c2-d881-9040-1c91b5c20311(a)centos.org> Content-Type: text/plain; charset=utf-8 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Updated Vagrant box's are now available for CentOS Linux 7 and CentOS Linux 6 for x86_64. These are available for the Libvirt and the VirtualBox providers in Vagrant. ref: https://atlas.hashicorp.com/centos/boxes/6 https://atlas.hashicorp.com/centos/boxes/7 Release Notes for these images are published at : https://seven.centos.org/2016/08/updated-centos-vagrant-images-available - -v1607-01/ We are doing all of our work, including build scripts and build content for these Vagrant Box's as a part of the CentOS Cloud Instance SIG. And host the content for contribution and participation at https://github.com/CentOS/sig-cloud-instance-build/tree/master/vagrant - - I would like to invite everyone to come join us and help extend the scope of this work, as well as improve the current results. regards, - -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAEBAgAGBQJXqvdGAAoJEI3Oi2Mx7xbtw+sH/2OSI2BJtd4/+lTnpJulQFhM ogE+dpfHgKvgVpUSm6PPjtmEVjP2x4OC/pALTRiBkQpgk7Mi7DNt9K8qjD7ClDxk WO/U5rkRTAvIZVFZ5BhXvrN1RzDArxSGdj5oSBnUzKWmc9wGvuX9Rz82FiC173KW 4Am9JeIlrYC5rsFzUqvijyaCG/8MweO6E242/FjfRWe+WTLX59OuVXzuRFVIpcvj p5WMolJ+j3BzqPYOUWIB8nqaFq+NQ7oHdxo/N/94gSxleT/5uHS+KXLyWeVhhHZE UgaAztSB/0r/mFmIkHa2ISqtASMGodTVicPKDfF96+5WldRhXLRVCNYtx4+AZLM= =oBhE -----END PGP SIGNATURE----- ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 138, Issue 4 ***********************************************

1 0

C7 Backup problem
by Alessandro Baggi 10 Aug '16

10 Aug '16

Good morning list, I've a question about backup performed with bacula. I manage a DELL server (dedicated on provider) with C7. I use bacula as backup system with volumes on disk. System performs mon-sat incremental backups and Sun full backup at 03.00 AM. I've another pool (named update) where I performs backup before each software update. Storage is on and external disk 2.5' of 1TB. Yesterday, I've applied centos update and I've performed a full backup before apply updates. Job done. After several hours, I got my disk unmounted and disconnected due to disk error (seems that this disk is failing) and was unable to remount disk. Rebooting system, the disk was mounted correctly. This morning I've checked if something happened. Backup performed and disk mounted without errors but I've noticed a strange behaviour. My incremental backup is large as last full backup (performed on sunday). This is the last jobs performed. 76 | backup-fd | 2016-08-07 03:04:44 | B | F | 191,040 | 7,975,649,059 | T | | 77 | backup-fd | 2016-08-08 03:04:57 | B | I | 44 | 44,593,988 | T | | 78 | backup-fd | 2016-08-08 09:52:57 | B | F | 191,024 | 7,978,295,072 | T | | 79 | backup-fd | 2016-08-08 12:10:31 | B | F | 0 | 0 | A | | 80 | backup-fd | 2016-08-09 03:05:03 | B | I | 191,024 | 7,978,337,100 | T Job with id 79 was aborted due to disk failure. Why, if I have a job full performed on sunday, on monday I got an incr job with the same size? Seems to be that the last incremental job was performed without considering the last full backup. I've checked log but there aren't errors. Thanks. Alessandro.

4 5

Maybe OT - Centos 5 SATA JMicron JMB361 SATA
by Ken Smith 10 Aug '16

10 Aug '16

Hi All, I know Centos 5 is almost EOL and all this is old but.... I'm helping a colleague who has moved a Centos 5 install on an IDE disk to system with a Foxconn M'board. His idea is to use the SATA interface that's on the Foxconn. The thing boots OK and then gets into a loop trying to start the interfaces to the SATA disks. Oceans of stuff like this in /var/log/messages Aug 7 04:23:32 filestore kernel: ata1: hard resetting link Aug 7 04:23:32 filestore kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Aug 7 04:23:32 filestore kernel: ata1.00: configured for UDMA/33 Aug 7 04:23:32 filestore kernel: ata1.01: configured for UDMA/33 Aug 7 04:23:32 filestore kernel: ata1: EH complete Aug 7 04:24:02 filestore kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Aug 7 04:24:02 filestore kernel: ata1.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in Aug 7 04:24:02 filestore kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Aug 7 04:24:02 filestore kernel: ata1.00: status: { DRDY } I have limited the SATA speed to 1.5G with a kernel param in Grub to see if that helps. After a few hours the thing seems to settle down and can see this cat /proc/partitions | grep sd 8 0 1953514584 sda 8 16 1953514584 sdb 8 32 1953514584 sdc But the devices are non-functional. eg:- smartctl -a /dev/sda Smartctl open device: /dev/sda failed: No such device and fdisk /dev/sda Unable to open /dev/sda So I reckon the JMicron JMB361 controller [02:00.0 SATA controller: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)] is not something that Centos 5 is very keen on. Its loaded the ahci module for it uname says Linux filestore 2.6.18-411.el5 #1 SMP Mon Jul 11 18:16:41 CDT 2016 i686 i686 i386 GNU/Linux This thread -> https://bugzilla.redhat.com/show_bug.cgi?id=462425 <- suggests that a fix may have been backported from 2.6.27 Does this look familiar to anyone? And is there a remedy or would I be best to swap in a better SATA controller in there? Suggestions?? Thanks Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Regarding using CentOS on Commercial Appliance
by Akshat Kakkar 10 Aug '16

10 Aug '16

Hi All!I am builiding a firewall appliance based on CentOS. I am using CentOS as it is with some packages removed and some configuration done to security harden the appliance. Over and above this I will be installing Apache Web Server and Tomcat to run my web application which will give a web interface to configure the iptables in the appliance. There is no development done in iptables. It is used as available in its latest version online. As Tomcat will be running as non-root so it cant actually write the iptables rule. For writing iptables rules I will be using C++ executables with SUID bit set.Once this will be done, I am planning to Commercialise it. Am I allowed to do so without revealing my web application code and the C++ executable code (for iptables)? I know all the CentOS packages, etc. might fall in GPL and as a result I should be supplying source code of all the packages in CentOS. What else is expected from me? Thanks.

4 4

ssh & ksh question
by m.roth＠5-cent.us 09 Aug '16

09 Aug '16

I need to run a report, source file on system 1, on system 2. I'd like to do this in one script, not have a second script to run it. Now cat script | ssh system2 works fine. But no matter what I've tried, it gags on ssh system2 <<EOF blah, blah EOF. Mostly, I have a multiline awk script in the script, with \ at the end of each line... *but* I think it's seeing "\n" as an eol, and complaining, of course. Suggestions? mark

3 5

Eclipse rpms
by Gordon Messmer 09 Aug '16

09 Aug '16

I use Fedora for most workstations, so I've only just noticed that CentOS and EPEL don't appear to have packages for eclipse. All of the Google search results I've seen that contain a process for installation merely document downloading the tarball from eclipse.org. Is there a yum repo for these packages? Does CentOS not rebuild the Red Hat software collections? https://access.redhat.com/discussions/933183

4 9

Centos 7 - how to resurrect /dev/fb0? Or an alternative to fbterm for 256 color tty terminals?
by Nick Cammorato 09 Aug '16

09 Aug '16

Hi Everyone! I've been trying to rediscover the lost art of appliance-ification. SystemD is actually pretty amenable to masking tty1 and spawning a program instead of login which makes a config console a rather easy thing to do (mostly). Have that bit done, no problem. Happily spawning a rather locked down program. However, you seem to be limited in terms of color palette, creating a new take on the classic how do you get a 256 color terminal on a tty problem (the related, how do you change the terminal resolution problem seems solved via boot param). The old way(that I used) was to just wrap whatever in fbterm, but fbterm is missing. I can compile and package and install it no problem, but apparently there's no longer a framebuffer for it to attach to - /dev/fb0 is gone - so it can't actually run. There doesn't appear to be anything that would create /dev/fb0 either - It looks like nothing was compiled into the default kernel. The vga16fb module is available if you install a xen kernel from centos-xen, but it's 16 colors. vmwgfx doesn't seem to make a framebuffer either, and it's questionable if that'll work across both virtualbox and vmware in any case. An alternative would be to use xvfb or some such but that's super overweight. So, finally, a question - does anyone know how you solve this today? Best, --Nick Cammorato

1 0

centos 7- boot doesn't wait for startup script to complete
by KM 09 Aug '16

09 Aug '16

Hi All,I have a general question. I have an old rc type startup script that I am still using on CentOS 7. I got it to run by creating the systemd service file... a simple one as shown below, for Myservices. # used to set up the Myservices onstartup[Unit]Description=Start and stop Myservices[Service]Type=oneshotExecStart=/etc/init.d/Myservices startExecStop=/etc/init.d/Myservices stopRemainAfterExit=yes[Install]WantedBy=multi-user.targetThis works. When the server starts Myservices is initiated. However the boot keeps going. When I log in Myservices is still running. it takes about 5 minutes to complete. This is normal. What is different is the boot up used to wait for the service to finish and then continue. Can I use any options in my service file shown above, to make it wait before finishing the boot up? ThanksKM

2 6

Localedef runs but doesn't change locale
by Zach Aufdemberge 09 Aug '16

09 Aug '16

Hello everyone, When I run the command localedef -c -i en_GB -f UTF-8 en_GB.utf-8 the command runs with no errors but running locale still shows: LANG=en_US.UTF-8 LANGUAGE=en_US LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= I rebooted the machine just in case, that didn't help Running locale -a shows many options including en_GB and en_GB.utf-8 The only way that I have been able to change the locale is by editing /etc/sysconfig/i18n. If I change that and then reboot it changes the locale. However what confuses me about this is that I can only change to a new locale, I can't seem to go back to a previous locale. For example, I started with en_US, changed it to en_GB which worked. Then I tried to change it back to en_US and nothing happened. After that I decided to try to see if it was only failing with en_US or if it would always fail. So I tried changing from en_GB to en_NZ which worked. Then I tried to go from en_NZ to en_US which failed. At this point I don't care as much about getting the right locale. I just want to know why it will change to something new, but not change back to a previous locale. I have tested this on 6.4, 6.5, and 6.8 and get the same results. First I was running it on a VM using QEMU and VMM but I tried it on a physical machine and nothing changed. All of these were fresh installs, the first thing I did after completing the install was try to change the locale. Any advice or explanation is appreciated, thanks in advance. Zach

1 0

LSI SATA MegaRaid & Centos 7 build 1511
by Fawzy Ibrhim 09 Aug '16

09 Aug '16

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

6 19

Does e2fsck.conf contain "broken_system_clock = 1" per default on CentOS7?
by Gabriele Pohl 09 Aug '16

09 Aug '16

Hi, on all of my CentOS7 VMs on different hypervisors the config file e2fsck.conf contains the line broken_system_clock = 1 I found this because on all of them, the root partition was not checked triggered by interval setting with tune2fs. Do you see similiar /default/ settings on your machines? Is it an issue only on VMs? I have no CentOS7 host on bare metal to compare. Thanks and cheers, Gabriele

2 6

centos 6.8 creates install to sde instead of sda
by geo.inbox.ignored 08 Aug '16

08 Aug '16

greetings one and all. when attempting to install centos 6.8 to an i386 mid tower, during setup of hard disk partitions, selection is for /dev/sde. if continued, after reboot, error is displayed after 'welcome to centos'. lines read: Checking filesystem fsck.ext4: no such file or directory while trying to open /dev/sda3 /dev/sda3: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -h 8193 <device> [FAILED] *** an error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. *** Warning -- SELinux is active *** Disabling security enforcement for system recovery. *** Run 'setenforce 1' to reenable. Give root password for maintenance (or type Control-D to continue): entering 'e2fsck -h 8193 /dev/sda3' results with same e2fsck message as above. after reading article; http://www.cyberciti.biz/faq/recover-bad-superblock-from-corrupted-partitio… using command; dumpe2fs /dev/sda3 | grep superblock error message is; dumpe2fs: No such file or directory while trying to open /dev/sda3 Couldn't find valid filesystem superblock. if i enter command; dumpe2fs /dev/sde3 | grep superblock superblock info is shown. why is sde working and not sda? this system has previously held 6.8, but partitioning was off in cylinders so i decided to correct. purchased latest release of partedmagic, booted, created new partitioning by cylinders. under pmagic, when i enter command; dumpe2fs /dev/sda3 | grep superblock superblocks are shown. so, how do i correct what ever to install 6.8 to sda, not sde? any/all answers/suggestions greatly appreciated. tia. -- peace out. CentOS GNU/Linux 7.1511 tc,hago. g . =+= Tired of having your microsoft os hacked? Change to Linux os, used by microsoft hackers. =+= in a world with out fences, who needs gates. =+=

1 0

CentOS automatic installation fails with “Installation Destination” error
by Manjunath A Kumatagi 08 Aug '16

08 Aug '16

Hi, I'm trying to install the centos netboot install on ppc64le platform but automation installation(kickstart) fails with the following error: Starting installer, one moment... find_file: stat /proc/device-tree/chosen/bootpath, No such file or directory anaconda 21.48.22.56-1 for CentOS AltArch 7 started. * installation log files are stored in /tmp during the installation * shell is available on TTY2 * when reporting a bug add logs from /tmp as separate text/plain attachments Starting automated install.......... Generating updated storage configuration storage configuration failed: failed to find a suitable stage1 device ================================================================================ ================================================================================ Installation 1) [x] Language settings 2) [x] Timezone settings (English (United States)) (UTC timezone) 3) [x] Installation source 4) [x] Software selection (http://mirror.centos.org/altar (Custom software selected) ch/7/os/ppc64le/) 6) [x] Kdump 5) [!] Installation Destination (Kdump is enabled)b | Help: F1 (Error checking storage configu ration) 7) [x] Network configuration (Wired (enp0s1) connected) ** (anaconda:1253): WARNING **: Could not open X display The installation was stopped due to incomplete spokes detected while running in non-interactive cmdline mode. Since there cannot be any questions in cmdline mode, edit your kickstart file and retry installation. The exact error message is: The following mandatory spokes are not completed: Installation Destination. The installer will now terminate. [root@llmtul01b qemu]# And kickstart file looks like: url --url="http://mirror.centos.org/altarch/7/os/ppc64le/" install keyboard us rootpw --lock --iscrypted locked timezone --isUtc --nontp UTC selinux --enforcing firewall --disabled network --bootproto=dhcp --device=link --activate --onboot=on reboot bootloader --disable lang en_US # Repositories to use repo --name="CentOS" --baseurl=http://mirror.centos.org/altarch/7/os/ppc64le/ --cost=100 ## Uncomment for rolling builds repo --name="Updates" --baseurl=http://mirror.centos.org/altarch/7/updates/ppc64le/ --cost=100 # Disk setup zerombr clearpart --all --initlabel part / --fstype ext4 --size=3000 Looking for the option to select the installation destination through kickstart file. Thanks, Manjunath.

2 1

Help with Network configuration files
by Matthew Crocker 08 Aug '16

08 Aug '16

Hello, I’m trying to configure a CentOS 7 server to act as a host for a bunch of virtual servers (KVM). I have an 802.3ad bonded Ethernet connected to the server with a bunch of tagged VLANs. I want to be able to build a bridge interface on the server for each VLAN and then attach that to the bond interface and the virtual clients. I also want to attach a host interface to one of the VLANs for access to the host from my Infrastructure network. I have everything working but the host interface, What device do I put into ifcfg-VLAN-OOB to create a new software only interface. Here is what I have so far. EM1-4 are configured as slaves to BOND0 ifcfg-em1: TYPE=Ethernet USERSTL=no MASTER=bond0 NAME=em1 UUID=0ca45a64-70eb-4bfb-bf73-90b221d5fa65 DEVICE=em1 ONBOOT=yes SLAVE=yes ifcfg-em2: TYPE=Ethernet NAME=em2 UUID=d79cc76a-8f38-460c-9430-2ae78b43dc1d DEVICE=em2 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-em3: TYPE=Ethernet NAME=em3 UUID=9f7cf127-eba2-45e8-95bd-814e6066aa74 DEVICE=em3 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-em4 TYPE=Ethernet NAME=em4 UUID=53517fa5-9e22-4286-a367-8c91ef6f1883 DEVICE=em4 ONBOOT=yes MASTER=bond0 USERCTL=no SLAVE=yes ifcfg-bond0: DEVICE=bond0 NAME=bond0 TYPE=bond BONDING_MASTER=yes ONBOOT=yes BONDING_OPTS="mode=802.3ad miimon=10 lacp_rate=1" USERCTL=no Bond0 is up, the switch & server are happy all 4 links are live, no errors I created a new bridge: ifcfg-br0: DEVICE=br1 TYPE=BRIDGE ONBOOT=yes NAME=br1 I created a VLAN interface on bond0 and attached it to the bridge ifcfg-bond0.77: DEVICE=bond0.77 BOOTPROTO=none ONBOOT=yes VLAN=yes TYPE=Vlan PHYSDEV=bond0 VLAN_ID=77 NAME="Vlan bond0.77" BRIDGE=br1 UUID=d91d518a-cf03-555f-9837-ef2d2763218b Now, How do I create a new interface ‘VLAN-OOB’, attach it to the bridge and assign an IP address? ifcfg-VLAN-OOB: DEVICE=???????? BOOTPROTO=none ONBOOT=yes NETWORK=10.126.77.0 IPADDR=10.126.77.2 PREFIX=24 GATEWAY=10.126.77.1 DNS1=66.59.48.85 DNS2=66.59.48.86 DOMAIN=crocker.com DEFROUTE=yes NAME=“OOB Management VLAN" BRIDGE=br1 I want to be able to attach virtual-client interfaces to br1 so they can be on the same network. Eventually I’ll have a dozen bridges with different networks (Internet, VOIP, OOB, Backup, etc) Thanks -Matt — Matthew Crocker President - Crocker Communications, Inc. Managing Partner - Crocker Telecommunications, LLC E: matthew(a)corp.crocker.com E: matthew(a)crocker.com

1 0

Broken package
by Alice Wonder 08 Aug '16

08 Aug '16

CentoOS 7 python-cryptography package is at version 0.8.2 It has a build-requires for python-cryptography-vectors of the same version (but different source tarball apparently) There is no python-cryptography-vectors in CentOS 7 base or updates. There is one in EPEL but it is version 0.8 -=- If you relax the BuildRequires to just require python-cryptography-vectors then the build fails because the build script itself checks to see if it is the same version.

3 2

RPM help
by TE Dukes 08 Aug '16

08 Aug '16

Hello, My installation of clamav is hosed up. It won't start due to a malformed database. I ran freshclam and updated the database but still have the problem. I was going to uninstall clamav but there are other app dependencies. Virtualmin is one. How can I do an uninstall/re-install without hosing more stuff up? I have found some examples, --nodeps, --replacepkgs and -replacefiles Also, what is the rpm command that will tell me all packages named clam*. Haven't used it in a while and have forgotten. I tried rpm -q "clam*" but that didn't work. TIA

3 2

CentOS 7 kickstart question
by Valeri Galtsev 06 Aug '16

06 Aug '16

Dear Experts, Could somebody point to kicstart HOWTO specific for CentOS 7? On CentOS 7 I somehow am always given human intervention questions about drive which defeats unattended ks install. <rant ??> I'm doing kickstart installations for quite some time, normally I was just installing system when new release comes, and am basing kickstart file on anaconda-ks.cfg - with some adoptions from my kickstart configuration for previous system release. Never had a need to re-learn a set of trivial things I use (as far back as I remember: CentOS 6, 5, ... Fedora 5, RH 9, 8, 7...). Now it turns out to be time to re-learn the thing. At least one snag I hit consistently with CentOS 7 kickstart is: it drops me into human decision as far as wiping hard drive and creating custom (or default probably as well) partitioning scheme is concerned. Most likely it is me who needs to learn new trick (like "tricking smart macintosh into actually doing what you want done") as it looks like safety defeats my unattended kickstart installation (like on Windows: "Do you really - really want to do this?") </rant> - if that was rant that is... Thanks a lot for your advises! Valeri ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

5 10

Enable all permissions for root in Samba ...
by reynierpm＠gmail.com 05 Aug '16

05 Aug '16

As I said in previous messages I have a local virtual machine running CentOS 7 so I do not need any security. Having that in mind I have installed Samba and this is how I setup for access the remote server: [global] workgroup = WORKGROUP server string = Samba Server %v netbios name = CentOS Server security = user map to guest = bad user dns proxy = no [root] path = / browsable =yes writable = yes guest ok = yes read only = no force user = root force group = root I am able to connect as root without password but I can't chdir into a few directories like for example /var/www. The permissions for such directory are: # ls -la /var/www/ total 4 drwxr-xr-x. 4 root root 31 Aug 4 19:00 . drwxr-xr-x. 20 root root 4096 Aug 4 20:02 .. drwxr-xr-x. 2 root root 6 Jul 18 11:30 cgi-bin drwxrwsr-x. 2 apache root 22 Jun 30 05:05 html Why I can't access to /var/html? What I am doing wrong? Thanks in advance *Reynier Perez Mira* Phone: (786) 5807572 EMail: reynierpm(a)gmail.com [image: Facebook] <https://facebook.com/ReynierPM> [image: Github] <https://github.com/reypm> [image: Google+] <https://plus.google.com/u/0/+ReynierP%C3%A9rezMira> [image: Twitter] <https://twitter.com/reypm> [image: LinkedIn] <https://www.linkedin.com/in/reynierpm>

3 4

CentOS-announce Digest, Vol 138, Issue 3
by centos-announce-request＠centos.org 05 Aug '16

05 Aug '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:1573 Moderate CentOS 6 squid Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 4 Aug 2016 12:51:39 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1573 Moderate CentOS 6 squid Security Update Message-ID: <20160804125139.GA65343(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1573 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1573.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a3dbfd66da87b943696b2a227d69d6e48a6560a02f398d9d8accd1ce9eb06562 squid-3.1.23-16.el6_8.6.i686.rpm x86_64: b4453e9f605489d41aae9cad09a4ce96b07be6868c4719b7237b87eccb62a91a squid-3.1.23-16.el6_8.6.x86_64.rpm Source: 35bed43b9baf4a43b9d7d8d2bccd5e1a98ea071de27d881e100d958e596786fc squid-3.1.23-16.el6_8.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 138, Issue 3 ***********************************************

1 0

Can't connect trough SSH to a new fresh CentOS 7 minimal server
by reynierpm＠gmail.com 05 Aug '16

05 Aug '16

I have installed a new CentOS 7 minimal virtual machine in Vmware Workstation. I have disabled the firewall by running: *systemctl disable firewalld* => this one for disable it permanently (I don't need it since it's a VM for development) *systemctl stop firewalld* => this one for stop the service I have set SELinux to be permissive. SSH is up and running as the output from: *service sshd status* But I can't connect trough SSH, I am missing something? Thanks in advance *Reynier Perez Mira* Phone: (786) 5807572 EMail: reynierpm(a)gmail.com [image: Facebook] <https://facebook.com/ReynierPM> [image: Github] <https://github.com/reypm> [image: Google+] <https://plus.google.com/u/0/+ReynierP%C3%A9rezMira> [image: Twitter] <https://twitter.com/reypm> [image: LinkedIn] <https://www.linkedin.com/in/reynierpm>

3 3

HEIST https
by Alessandro Baggi 05 Aug '16

05 Aug '16

Hey there, today I've ridden about HEIST. https://www.google.it/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0ahUKEwj… What about Centos?

1 0

firwalld 0.4+ ipset root.
by Jon LaBadie 04 Aug '16

04 Aug '16

Before firewalld I used to use ipsets to blacklist several countries. Firewalld added support for ipsets with version 0.4, a year ago. Centos 7.2 is still at 0.3.9. Anyone know of a newer Centos package? jon -- Jon H. LaBadie jon(a)jgcomp.com 11226 South Shore Rd. (703) 787-0688 (H) Reston, VA 20190 (703) 935-6720 (C)

1 0

Systemd and network startup/shutdown ?
by James Pearson 04 Aug '16

04 Aug '16

I've just started to dip my toe in the water with CentOS 7 - and have started looking at porting custom CentOS 6 init.d/xinetd/whatever scripts and configs to systemd, but notice that CentOS 7 appears to use /etc/rc.d/init.d/network as the method for starting/stopping the network Is this correct - or am I missing something? Thanks James Pearson

2 1

Re: [CentOS] curl build system is broken and so is mock
by James B. Byrne 04 Aug '16

04 Aug '16

On Wed, August 3, 2016 22:53, Alice Wonder wrote: > > I didn't realize ldd was recursive. I may have known that at one > point (been using linux since MK Linux DR3 and building RPMs since > 1999), but have a head injury results in memory problems with > pieces of knowledge I don't frequently use. Most of us have that problem; head injuries or not. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail Do NOT open attachments nor follow links sent by e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

Re: [CentOS] php55w-fpm on CentOS 7: settings location
by James B. Byrne 04 Aug '16

04 Aug '16

On Wed, August 3, 2016 14:19, Always Learning wrote: > > On Wed, 2016-08-03 at 13:55 -0400, Jason Welsh wrote: > >> What I do is create a php.php file on the root of my fileserver >> with >> the following >> >> <?php phpinfo() ?> > > I use a text command: php -i > > > php -i > php-i.txt echo '<?php phpinfo() ?>' | php > php-echo.txt diff php-i.txt php-echo.txt 709,710c709,710 < _SERVER["PHP_SELF"] => < _SERVER["SCRIPT_NAME"] => --- > _SERVER["PHP_SELF"] => - > _SERVER["SCRIPT_NAME"] => - 714c714 < _SERVER["REQUEST_TIME"] => 1470317489 --- > _SERVER["REQUEST_TIME"] => 1470317531 716a717 > [0] => - 719c720 < _SERVER["argc"] => 0 --- > _SERVER["argc"] => 1 I do not see much to choose between them in terms of output and 'php -i' is certainly handier when in a terminal session on the host. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail Do NOT open attachments nor follow links sent by e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

CentOS-announce Digest, Vol 138, Issue 2
by centos-announce-request＠centos.org 04 Aug '16

04 Aug '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:1551 Critical CentOS 6 firefox Security Update (Johnny Hughes) 2. CESA-2016:1551 Critical CentOS 7 firefox Security Update (Johnny Hughes) 3. CESA-2016:1539 Important CentOS 7 kernel Security Update (Johnny Hughes) 4. CESA-2016:1551 Critical CentOS 5 firefox Security Update (Johnny Hughes) 5. CEEA-2016:1558 CentOS 7 ixgbe Enhancement Update (Johnny Hughes) 6. CEEA-2016:1559 CentOS 7 bnx2x Enhancement Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 3 Aug 2016 13:34:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1551 Critical CentOS 6 firefox Security Update Message-ID: <20160803133444.GA33715(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1551 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1551.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9df10ccea2612e3a15c8efda9ba170b5a56d097c3fe5693519da7dc174afc91c firefox-45.3.0-1.el6.centos.i686.rpm x86_64: 9df10ccea2612e3a15c8efda9ba170b5a56d097c3fe5693519da7dc174afc91c firefox-45.3.0-1.el6.centos.i686.rpm 63f8ab8d2156549bb98daf269c1670f2f600477d4e0af4d13d7b02b4cdb44912 firefox-45.3.0-1.el6.centos.x86_64.rpm Source: 3a05bc5c24a4b0c24b77b918e1361be00493395f27aaa5afa4d743d00e192826 firefox-45.3.0-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 3 Aug 2016 14:06:18 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1551 Critical CentOS 7 firefox Security Update Message-ID: <20160803140618.GA39590(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1551 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1551.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0b6e166fc20500ed20985a8d668eea12cfbdfb39e0fd714061f8f82b30a34ba5 firefox-45.3.0-1.el7.centos.i686.rpm 5e8927756bd707eca7f3fa012a794a11f8008a2434876e95a85faec926d32fe5 firefox-45.3.0-1.el7.centos.x86_64.rpm Source: d3d2fd8370693a06da5827a5006161d1701fa1280e0a094169a9e0e8e242ee60 firefox-45.3.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 3 Aug 2016 14:05:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1539 Important CentOS 7 kernel Security Update Message-ID: <20160803140549.GA39501(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1539 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1539.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a0e90ff663ac2a387e16320bf1e766ba0dd3191de684a637cd624f436fe8f7a0 kernel-3.10.0-327.28.2.el7.x86_64.rpm ad03e7f34c5410790b1a15655313203706cbf062629f1958f370974fa2568817 kernel-abi-whitelists-3.10.0-327.28.2.el7.noarch.rpm d17cc0f7b3ffac0e1f083a8a687f20689dd7a5a0c27811cfa7302a6cfccd82b6 kernel-debug-3.10.0-327.28.2.el7.x86_64.rpm e23bf54b2e5354a7984445cd6a79b0d2d3e4985a3586d96f848cc8e601dbaac7 kernel-debug-devel-3.10.0-327.28.2.el7.x86_64.rpm a8c5c03fd36b7ab9d171613d5048007cf71e2272b7b93c26ae09668381ef4fe3 kernel-devel-3.10.0-327.28.2.el7.x86_64.rpm c2587858a6ae29a3ae81e7c8b451b4c832ed7758478729e1ef16a88f4aa24151 kernel-doc-3.10.0-327.28.2.el7.noarch.rpm a1472c9948b043b614e92946ad65cde38a6380ca15eec601013429ded0258e7b kernel-headers-3.10.0-327.28.2.el7.x86_64.rpm 96800a0be6263a40d4fa9731f8d80f7a15edb605f47952df53e0b384baf222fc kernel-tools-3.10.0-327.28.2.el7.x86_64.rpm 2830cf235d377d6756550ad3a1649f1be8e5093039ef2b2387eaaf5181924aba kernel-tools-libs-3.10.0-327.28.2.el7.x86_64.rpm 506b7604b85cd0d93eabe143844be07c4aa639e3aa550615988e4a948fac1060 kernel-tools-libs-devel-3.10.0-327.28.2.el7.x86_64.rpm deaaceaad64b48a3bbd5a449dca8c2641914b8f363057facbba0f9c090c9a751 perf-3.10.0-327.28.2.el7.x86_64.rpm 917f414ae910bd6800e6920a9fd3a710bc48257685b79205b979251587e4df4c python-perf-3.10.0-327.28.2.el7.x86_64.rpm Source: fe45609a3f959507325df652f681c0ae18ce494e5bc9385152adc6c5230f415f kernel-3.10.0-327.28.2.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Wed, 3 Aug 2016 14:41:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1551 Critical CentOS 5 firefox Security Update Message-ID: <20160803144111.GA21019(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1551 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1551.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cd4063a3a38e1a483f394963d77c8ed68ffa6410bccc0021fe9c7a0f173b22f0 firefox-45.3.0-1.el5.centos.i386.rpm x86_64: cd4063a3a38e1a483f394963d77c8ed68ffa6410bccc0021fe9c7a0f173b22f0 firefox-45.3.0-1.el5.centos.i386.rpm 9f4bb40cec40e6445c0c2d3c22f84f33b206ac138c3f70042d627dfc12edbad4 firefox-45.3.0-1.el5.centos.x86_64.rpm Source: 3585eb31593e09b0b9570b77733fb41f1d01df7efd77623c438868604220011e firefox-45.3.0-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 5 Date: Wed, 3 Aug 2016 16:27:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2016:1558 CentOS 7 ixgbe Enhancement Update Message-ID: <20160803162722.GA42711(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2016:1558 Upstream details at : https://rhn.redhat.com/errata/RHEA-2016-1558.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b22b497499e1a61eee0931930295a1bcb9391ab357d4b6d347193e00827bdaf2 kmod-ixgbe-4.4.0_k-1.el7_2.x86_64.rpm Source: 62bf19c831a07d6fe124c0a3a7048d747b3d0ecc929df8bca42a4d96909b26ab ixgbe-4.4.0_k-1.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Wed, 3 Aug 2016 16:27:41 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2016:1559 CentOS 7 bnx2x Enhancement Update Message-ID: <20160803162741.GA42772(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2016:1559 Upstream details at : https://rhn.redhat.com/errata/RHEA-2016-1559.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8402640a0d9a8a72c4978ce2a954d4a01cffaadc7e6a0619b94907de432ccb2f kmod-bnx2x-1.712.30-1.el7_2.x86_64.rpm dff7734ffe162aa1303c60509111bf58a63ce454d4977bd2433f98a2f29a0a30 kmod-bnx2x-firmware-1.712.30-1.el7_2.x86_64.rpm Source: b5b33229b5927d4bfed139c71f0dc9357606a4ab8e150c918fb61753bc3410ef bnx2x-1.712.30-1.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 138, Issue 2 ***********************************************

1 0

curl build system is broken and so is mock
by Alice Wonder 04 Aug '16

04 Aug '16

I'm having a major frustration with curl. When building curl, if libssl.so.10 is present the curl binary WILL link against it. If curl is configured with an ssl option - the library WILL link against it. If you change the curl configuration options to use a different TLS library (e.g. nss like CentOS does) the curl binary and library will still link against the OpenSSL library. There's definitely something funny about curl's ./configure - If you disable features but they are still pulled in by mock as dependencies for the build environment, the curl library will respect your configure options and won't link against those features (except it will for libssl.so.10 if ANY tls option is chosen) but the binary will link against the libraries if it is there. EVEN IF THE DEVEL PACKAGE WITH HEADER FILES IS NOT PRESENT. There is something very broken about how curl builds. If I was a skilled blackhat, I might look for ways that causes it to be exploitable, because the building of curl doesn't do what the user expects. I tried building curl creating a mock build environment where openssl is forbidden. There's a bug in mock. In both base and updates I have exclude=openssl* I had to rebuild many packages against LibreSSL to get that to work. That btw is what I'm trying to do with curl - build it against LibreSSL and it does, but also links against libssl.so.10 and there is the problem - it's not safe to have a library (or binary) that links against both OpenSSL and LibreSSL. With the presence of those excludes - mock does prevent the installation of openssl packages *in some cases* but it allows it others. rpm depends upon curl and curl from the CentOS packages depends upon libssl.so.10 and mock pulls in rpm and thus pulls in curl and thus pulls in openssl-libs and so if building curl in mock - it will link against openssl. I went through everything in the mock buildroot with ldd and curl is the ONLY package installed that has anything linked against openssl. I tried building an intermediate curl for mock to pull in without any TLS capabilities - it works for the library but the curl binary still links against openssl. I tried building an intermediary RPM package that doesn't require curl - but something else in the build system is pulling in curl resulting in libssl.so.10 being installed. I wish mock didn't have this bug as if it actually respected the excludes on base and updates, it would tell me what packages are pulling in openssl-libs but unfortunately there are cases where the excludes are not respected. This is really frustrating. I tried looking through the curl buildsystem to see if I could patch that but it seems messy to me and I can't find why the binary links against libraries you disable with configure and I can't see why the library always links against openssl if any TLS is chosen. It's very frustrating. -=- No other package I've rebuilt against LibreSSL has this problem. With curl its a big problem. It definitely should not be linking against libraries it doesn't even have the right headers for.

3 18

php55w-fpm on CentOS 7: settings location
by Boris Epstein 03 Aug '16

03 Aug '16

Hello all, Does anybody know where to enter settings for php-fpm? I have tried a number of things, including starting it with "-c /etc/php.ini" but that seemed to have any effect. Any idea on how to control it? What am I doing wrong? :) Thanks in advance. Cheers, Boris.

5 5

CentOS 6.8 with current kernel fails with pm-hibernate (cifsd refuses to freeze)
by Jari Fredriksson 03 Aug '16

03 Aug '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Now, this is not apparently very common to CentOS or EL server, but I need to hibernate one of myservers after a batch job daily. Current kernel appears to fail with pm-hibernate now. $ cat /etc/redhat-release CentOS release 6.8 (Final) $ uname -a Linux xxxx 2.6.32-642.3.1.el6.x86_64 #1 SMP Tue Jul 12 18:30:56 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux pm-hibernate tries but apparently fails. cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 3 microcode : 5 cpu MHz : 2999.964 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr bogomips : 5999.92 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 3 microcode : 5 cpu MHz : 2999.964 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr bogomips : 5999.92 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Track dump here: https://static.bitwell.biz/trace.txt OK. Last line says the process causing this is cifsd. Anything to fix this? - -- jarif(a)iki.fi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAleg/I8ACgkQKL4IzOyjSrb9RwCfSo/1Pd8ivYvQeT3T4mvpXOe0 v3gAoK7l++foIUetgtP09/uoAdLQ1kAP =fJBs -----END PGP SIGNATURE-----

2 3

Mirror sync strategy or problem?
by Gianluca Cecchi 03 Aug '16

03 Aug '16

Hello, I have a CentOS 7 server, right installed. I notice that some packages that are present at http://mirror.centos.org/centos/7/updates/x86_64/Packages/ are not present yet at some other mirrors (that are the ones my fastestmirror plugin picks up... even after a clean): http://centos.datente.com/media/7/updates/x86_64/Packages/ or http://ct.mirror.garr.it/mirrors/CentOS/7/updates/x86_64/Packages/ For example packages like glibc, bash and dbus have updates dated 02 August on the main mirror site but not yet at the other two sites. if in Centos-Base.repo file, [updates] section, I use baseurl instead of mirrorlist entry and run sudo yum clean all sudo yum update I then get these packages' list: Dependencies Resolved ===================================================================================================================== Package Arch Version Repository Size ===================================================================================================================== Updating: bash x86_64 4.2.46-20.el7_2 updates 1.0 M dbus x86_64 1:1.6.12-14.el7_2 updates 306 k dbus-libs x86_64 1:1.6.12-14.el7_2 updates 151 k dbus-x11 x86_64 1:1.6.12-14.el7_2 updates 46 k device-mapper-persistent-data x86_64 0.6.2-1.el7_2 updates 366 k glibc x86_64 2.17-106.el7_2.8 updates 3.6 M glibc-common x86_64 2.17-106.el7_2.8 updates 11 M gssproxy x86_64 0.4.1-8.el7_2 updates 84 k initscripts x86_64 9.49.30-1.el7_2.3 updates 429 k iscsi-initiator-utils x86_64 6.2.0.873-33.el7_2.2 updates 419 k iscsi-initiator-utils-iscsiuio x86_64 6.2.0.873-33.el7_2.2 updates 82 k libblkid x86_64 2.23.2-26.el7_2.3 updates 167 k libgovirt x86_64 0.3.3-1.el7_2.4 updates 64 k libgudev1 x86_64 219-19.el7_2.12 updates 66 k libmount x86_64 2.23.2-26.el7_2.3 updates 169 k libsss_idmap x86_64 1.13.0-40.el7_2.12 updates 104 k libsss_nss_idmap x86_64 1.13.0-40.el7_2.12 updates 103 k libtiff x86_64 4.0.3-25.el7_2 updates 169 k libuuid x86_64 2.23.2-26.el7_2.3 updates 74 k mdadm x86_64 3.3.2-7.el7_2.1 updates 393 k microcode_ctl x86_64 2:2.1-12.el7_2.1 updates 535 k open-vm-tools x86_64 9.10.2-5.el7_2 updates 472 k open-vm-tools-desktop x86_64 9.10.2-5.el7_2 updates 161 k sssd-client x86_64 1.13.0-40.el7_2.12 updates 158 k systemd x86_64 219-19.el7_2.12 updates 5.1 M systemd-libs x86_64 219-19.el7_2.12 updates 358 k systemd-python x86_64 219-19.el7_2.12 updates 99 k systemd-sysv x86_64 219-19.el7_2.12 updates 53 k util-linux x86_64 2.23.2-26.el7_2.3 updates 1.9 M Transaction Summary ===================================================================================================================== Upgrade 29 Packages Total download size: 28 M Is this ok [y/d/N]: What are typical delays in mirrors' sync? Or is there any problem in mirrors updates? Thanks, Gianluca

3 4

CentOS-announce Digest, Vol 138, Issue 1
by centos-announce-request＠centos.org 03 Aug '16

03 Aug '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:1547 Important CentOS 6 libtiff Security Update (Johnny Hughes) 2. CEBA-2016:1544 CentOS 7 389-ds-base BugFix Update (Johnny Hughes) 3. CEBA-2016:1522 CentOS 7 bash BugFix Update (Johnny Hughes) 4. CEBA-2016:1444 CentOS 7 dbus BugFix Update (Johnny Hughes) 5. CEBA-2016:1545 CentOS 7 device-mapper-persistent-data BugFix Update (Johnny Hughes) 6. CEBA-2016:1449 CentOS 7 glibc BugFix Update (Johnny Hughes) 7. CESA-2016:1538 Moderate CentOS 7 golang Security Update (Johnny Hughes) 8. CEBA-2016:1527 CentOS 7 gssproxy BugFix Update (Johnny Hughes) 9. CEBA-2016:1523 CentOS 7 initscripts BugFix Update (Johnny Hughes) 10. CEBA-2016:1530 CentOS 7 iscsi-initiator-utils BugFix Update (Johnny Hughes) 11. CEBA-2016:1536 CentOS 7 libgovirt BugFix Update (Johnny Hughes) 12. CESA-2016:1546 Important CentOS 7 libtiff Security Update (Johnny Hughes) 13. CEBA-2016:1531 CentOS 7 mdadm BugFix Update (Johnny Hughes) 14. CEBA-2016:1534 CentOS 7 microcode_ctl BugFix Update (Johnny Hughes) 15. CEBA-2016:1526 CentOS 7 mod_auth_gssapi BugFix Update (Johnny Hughes) 16. CEBA-2016:1533 CentOS 7 open-vm-tools BugFix Update (Johnny Hughes) 17. CEBA-2016:1537 CentOS 7 pacemaker BugFix Update (Johnny Hughes) 18. CEBA-2016:1535 CentOS 7 resource-agents BugFix Update (Johnny Hughes) 19. CEBA-2016:1540 CentOS 7 slapi-nis BugFix Update (Johnny Hughes) 20. CEBA-2016:1528 CentOS 7 sssd BugFix Update (Johnny Hughes) 21. CEBA-2016:1524 CentOS 7 systemd BugFix Update (Johnny Hughes) 22. CEBA-2016:1525 CentOS 7 util-linux BugFix Update (Johnny Hughes) 23. CEBA-2016:1536 CentOS 7 virt-viewer BugFix Update (Johnny Hughes) 24. CEBA-2016:1526 CentOS 7 ipa BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 2 Aug 2016 15:06:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1547 Important CentOS 6 libtiff Security Update Message-ID: <20160802150600.GA63294(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1547 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1547.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1701fdf308e42109a8c84a4c28b88a189ac5013592f61651da3711909e4c02f2 libtiff-3.9.4-18.el6_8.i686.rpm 81877483ff255596cf278e47ec7d9248a8adaa3d36c5430e726e1d9e2cf99d84 libtiff-devel-3.9.4-18.el6_8.i686.rpm d436dbca6a7294667656eaabe5cfcf2169050b5e48003a1c66f67dfbc561e283 libtiff-static-3.9.4-18.el6_8.i686.rpm x86_64: 1701fdf308e42109a8c84a4c28b88a189ac5013592f61651da3711909e4c02f2 libtiff-3.9.4-18.el6_8.i686.rpm 9115b1a909b80cf146f972cc9e38adee45818bc5997571f4ba20dbe082717c90 libtiff-3.9.4-18.el6_8.x86_64.rpm 81877483ff255596cf278e47ec7d9248a8adaa3d36c5430e726e1d9e2cf99d84 libtiff-devel-3.9.4-18.el6_8.i686.rpm fedc1887876906e4ceef08a52a258872dbdb35c625fb9f5826e3b593b25ee7b2 libtiff-devel-3.9.4-18.el6_8.x86_64.rpm eb12631cde623b9be36d2c04b96f1e0794ea4a38e9c83de8a824b47fa68895c6 libtiff-static-3.9.4-18.el6_8.x86_64.rpm Source: cdcf05901d605fa2969161d91a724e57aa508f9f0a12cb55b50891bf9649cf41 libtiff-3.9.4-18.el6_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Tue, 2 Aug 2016 21:57:51 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1544 CentOS 7 389-ds-base BugFix Update Message-ID: <20160802215751.GA13672(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1544 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1544.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7a3ca6fd532637d25bcbdbef7927cd50d89c687d97d29fedb38af84d41606c79 389-ds-base-1.3.4.0-33.el7_2.x86_64.rpm 313bcd815c80151e916ef5127631b38f060dcc0630afa01206895cfc78518198 389-ds-base-devel-1.3.4.0-33.el7_2.x86_64.rpm a9ba90388166cfa0c056ba005fad3e593e68c351f5696c5b187093ed043a6971 389-ds-base-libs-1.3.4.0-33.el7_2.x86_64.rpm Source: 02dfe683ace42216ebfd976242b4ff7eb88a4e98211c687dc41a857041ed644a 389-ds-base-1.3.4.0-33.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Tue, 2 Aug 2016 21:57:51 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1522 CentOS 7 bash BugFix Update Message-ID: <20160802215751.GA13744(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1522 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1522.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 80903bbf766045b3ad4a278371796e331c6a92f3df8afb62c579025705877fb9 bash-4.2.46-20.el7_2.x86_64.rpm 53858be63719604229d08a5a70a6b19cc145159dab5a96daaaa0fb161c83124a bash-doc-4.2.46-20.el7_2.x86_64.rpm Source: cb6acfa45d2ddcf60f870b950ef130829d4389b576b019bb1468b71ce1056f1f bash-4.2.46-20.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Tue, 2 Aug 2016 21:57:52 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1444 CentOS 7 dbus BugFix Update Message-ID: <20160802215752.GA13832(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1444 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1444.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5f165680fc6a1ab0eca0cca2bf398bd63dac6c6083ca164e7354f003ba9cc713 dbus-1.6.12-14.el7_2.x86_64.rpm 09cab9c8b9326a0a6b60ec9c2c5ac8696dd0d5eac0f022ce4bdd2c3e9cd4dd3f dbus-devel-1.6.12-14.el7_2.i686.rpm b0ac999dfe37569c8e207e519931202f8a57d27dd47dfc91c21eecdd12edee91 dbus-devel-1.6.12-14.el7_2.x86_64.rpm 6f7628bd74e6526e55384522aeb9330584bbedcc712574d580a939e3864b7acb dbus-doc-1.6.12-14.el7_2.noarch.rpm 03af0dbcacdf9d6b5802d9a6166c8d062f200d96bf79d4e4fc1380cb1beada42 dbus-libs-1.6.12-14.el7_2.i686.rpm 777ea813cc6d1cd885191d97826b3d281c0c204d4cadac72c523fb3d0cbfaed8 dbus-libs-1.6.12-14.el7_2.x86_64.rpm f41bad549103eca1e058a818789e1a55ccdd0a26b99903140f67ee545a3604c2 dbus-x11-1.6.12-14.el7_2.x86_64.rpm Source: f7edcc051d40855615870635c1dcee53035351e4ce7e2e5757704f8ddaba645d dbus-1.6.12-14.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Tue, 2 Aug 2016 21:57:52 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1545 CentOS 7 device-mapper-persistent-data BugFix Update Message-ID: <20160802215752.GA13897(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1545 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1545.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8d9da7a164bc8f5da5199e7207a45349b6796df28f9980ab3d6def04b3451794 device-mapper-persistent-data-0.6.2-1.el7_2.x86_64.rpm Source: 9797646f0aad74cd2dd825b55f75e5328a41b1fb246539d2f5fe271c93294c75 device-mapper-persistent-data-0.6.2-1.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Tue, 2 Aug 2016 21:57:53 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1449 CentOS 7 glibc BugFix Update Message-ID: <20160802215753.GA13994(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1449 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1449.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e0ab9bd5b76b95a603584fd9b6481b53e0933efda24b48093e579d7a3842b24a glibc-2.17-106.el7_2.8.i686.rpm 625ad12e86ae1d9afacc9a9f80f22c1ade035c3e8d506605b2027ae58a23ae90 glibc-2.17-106.el7_2.8.x86_64.rpm 169c23044d146a882736258196dd7ca7da2338c6f2405ac15a67d28af38cc0cb glibc-common-2.17-106.el7_2.8.x86_64.rpm 3720af05c78e35f2f22e108ed260b0e35996a5d207703d88f09be6b5669ea0d3 glibc-devel-2.17-106.el7_2.8.i686.rpm 92527dea641c4603da0a4954421d89b2ed8d3ee4407c4ee660e359d6514c0d6d glibc-devel-2.17-106.el7_2.8.x86_64.rpm b249f88e00a7af6994e14c13288f2777901f5a0a4392d91db0952fa54c0dd743 glibc-headers-2.17-106.el7_2.8.x86_64.rpm 33e4aa9945788b1848e626006f920a8ff7e9da32cf2578d8cd2bf6b7ec2913fe glibc-static-2.17-106.el7_2.8.i686.rpm 65ca0840783f7703624b73f6bd9dfa6c68d141a2c8f620310a2089f323a79dc0 glibc-static-2.17-106.el7_2.8.x86_64.rpm 9307944d1bff44047f1976916a7d0b4197f3c5f8cba58ecab51a805dbe12885d glibc-utils-2.17-106.el7_2.8.x86_64.rpm f94ded265c5060d8552b69e1900509cba70264b9ead1946008c897972e5f8611 nscd-2.17-106.el7_2.8.x86_64.rpm Source: 430cb5c8063579339aa3777a5589ae2247912c5d32e32ef916aba97055395d26 glibc-2.17-106.el7_2.8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Tue, 2 Aug 2016 21:57:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1538 Moderate CentOS 7 golang Security Update Message-ID: <20160802215755.GA14067(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1538 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1538.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3da19f416b32b4cc85c4206ae095864b531097e9176c078d471fe99c03b612d9 golang-1.6.3-1.el7_2.1.x86_64.rpm 11e85cc81ec3c499d328a7c008e718136c2e8cdb02a6ce011f538591a600a808 golang-bin-1.6.3-1.el7_2.1.x86_64.rpm 8476cfef7a47fb0d5826104d64e5201f292f7ca5201a647e64528a1fe610e298 golang-docs-1.6.3-1.el7_2.1.noarch.rpm 5abc47e9895000746e82440d681b457e0f581890e9deb9e37bbd0d9080e7691c golang-misc-1.6.3-1.el7_2.1.noarch.rpm ba0d77db98dcf03c230dbcc8649eb6e7ae37dc64b6ace1315e65434d7268705b golang-src-1.6.3-1.el7_2.1.noarch.rpm 28a7097901bd4f78dd9b9e51e43a2d09152c2ee43569f2dc1620a0178ff644d9 golang-tests-1.6.3-1.el7_2.1.noarch.rpm Source: ba86fc329b5d6b52c17f09630dd0df05853a58ef3b7ac7dd645762be29e068cd golang-1.6.3-1.el7_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Tue, 2 Aug 2016 21:57:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1527 CentOS 7 gssproxy BugFix Update Message-ID: <20160802215755.GA14131(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1527 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1527.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 6a9a1160f894ed26bbdf4ca9ea1565fd5b28195000bdb3a2dc1945fc76c59e66 gssproxy-0.4.1-8.el7_2.x86_64.rpm Source: 425c2bf9b64155e192d0f4bfa8b09887e03341e6f98d2e6833b8682f17d8cab6 gssproxy-0.4.1-8.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 9 Date: Tue, 2 Aug 2016 21:57:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1523 CentOS 7 initscripts BugFix Update Message-ID: <20160802215755.GA14200(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1523 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1523.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 48ea95e2560447f1e436b3c92e08a91301737b9098caecb52cf81d02f8887ac3 debugmode-9.49.30-1.el7_2.3.x86_64.rpm f76bda3fcb52fb7cf5779790343e7a080832cee39eef1a13d7bb6d7b44b134f5 initscripts-9.49.30-1.el7_2.3.x86_64.rpm Source: 232ca7afc62f81d198de444400dc2cc0cd35908122db8e9a273ac9d46cb26ba8 initscripts-9.49.30-1.el7_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 10 Date: Tue, 2 Aug 2016 21:57:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1530 CentOS 7 iscsi-initiator-utils BugFix Update Message-ID: <20160802215757.GA14310(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1530 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1530.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 684e67a738b7dce51fd91736f404ec13e2816f48d8474478ac10336b93c03a0e iscsi-initiator-utils-6.2.0.873-33.el7_2.2.i686.rpm 834a8c18c7ee02963aa8c4c4f3d1b5aad2762715bb3fdc6a7efcdbe78bd752f2 iscsi-initiator-utils-6.2.0.873-33.el7_2.2.x86_64.rpm 93ac02ec70706226a2849dee8c6c39b2440b2d13444beeb066ead8e2e6cc6662 iscsi-initiator-utils-devel-6.2.0.873-33.el7_2.2.i686.rpm ba3d1771cdf04b6ab717d48fbc1f946560eb70e60be5608ce396aef23a44f969 iscsi-initiator-utils-devel-6.2.0.873-33.el7_2.2.x86_64.rpm 2dc7269aa0aa992b78685ef37dba6a27be4919453616c07d957d8594f2277971 iscsi-initiator-utils-iscsiuio-6.2.0.873-33.el7_2.2.x86_64.rpm Source: 08a81a1c93c3aa5da7f7b4666b8c660d48f51efea45472f08cd9467ffde3e6df iscsi-initiator-utils-6.2.0.873-33.el7_2.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 11 Date: Tue, 2 Aug 2016 21:57:57 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1536 CentOS 7 libgovirt BugFix Update Message-ID: <20160802215757.GA14447(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1536 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1536.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 87b4a73012cb08b9068dac809832905ce7832c70dbcec218750c03a7026daad4 libgovirt-0.3.3-1.el7_2.4.i686.rpm 18537c31367589754f2cd7ad0c830da636f55e5e1c740a0a09d9e5c7b83e9f35 libgovirt-0.3.3-1.el7_2.4.x86_64.rpm 021f69336390708324d22a5cc16d9a04195252fef99d4517cc8900cdf66b89af libgovirt-devel-0.3.3-1.el7_2.4.i686.rpm 40db11a6717c06ffa91c742e26429996e44c084e29bbe87a827542341a3fd981 libgovirt-devel-0.3.3-1.el7_2.4.x86_64.rpm Source: fa0c488124649422b1fe1b41ee4505798aa1b95507d9105684e94857dba30818 libgovirt-0.3.3-1.el7_2.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 12 Date: Tue, 2 Aug 2016 21:57:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:1546 Important CentOS 7 libtiff Security Update Message-ID: <20160802215758.GA14529(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:1546 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1546.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 38ea752f8fbb0d2c79a7a647e5adf536ea9805993e947a875d67ef8e2731ef7c libtiff-4.0.3-25.el7_2.i686.rpm dc891cf3d0afc0483753fef0ae1298722378a90611db62ae658055679ceeed78 libtiff-4.0.3-25.el7_2.x86_64.rpm 29e13443a6b24a75ae2f0e6a5b58006129f9f9c9289bea011c88a94c33b3802b libtiff-devel-4.0.3-25.el7_2.i686.rpm b5f9e615a3ebcc987597fd3b2400f5c08657ff32e5e3b5ba5415c7a6d02bf258 libtiff-devel-4.0.3-25.el7_2.x86_64.rpm 09a01d05f2bac16b9963424a18303e5efbbb5f1557cdc9105b4d6382eb8e9851 libtiff-static-4.0.3-25.el7_2.i686.rpm 432aed62716177440832629ddadbe1eb4fc74cd1241c91595debe145f462f0ae libtiff-static-4.0.3-25.el7_2.x86_64.rpm 484104cedb9abcbc12e94c87cdfeb0ba366a433478f906bfa9032a89c6490d1c libtiff-tools-4.0.3-25.el7_2.x86_64.rpm Source: 37c6504438b41b65a1816c52bb0ccff535964c567914d3d68d5c1ca13fc4685f libtiff-4.0.3-25.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 13 Date: Tue, 2 Aug 2016 21:57:58 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1531 CentOS 7 mdadm BugFix Update Message-ID: <20160802215758.GA14593(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1531 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1531.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 096795fd722b8cd569c3960b3edd41e110f841e38d8904099247e814bb94032b mdadm-3.3.2-7.el7_2.1.x86_64.rpm Source: 319ae85ef91331eadfe38fb903a42bbd5b5e5070eced2bd48fec005017e2279d mdadm-3.3.2-7.el7_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 14 Date: Tue, 2 Aug 2016 21:57:59 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1534 CentOS 7 microcode_ctl BugFix Update Message-ID: <20160802215759.GA14657(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1534 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1534.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 37691339e37f8f1fb97cc78ace142e11751e3f16ff4eeed6cc1e4d99426ddaee microcode_ctl-2.1-12.el7_2.1.x86_64.rpm Source: d24b5b7fe90a54140353586fe28c3487fcfdcda9735891ab657c6aa90eb08033 microcode_ctl-2.1-12.el7_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 15 Date: Tue, 2 Aug 2016 21:57:59 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1526 CentOS 7 mod_auth_gssapi BugFix Update Message-ID: <20160802215759.GA14721(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1526 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1526.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 64870fdb6bd36e425f36d3bbe10385bca6fd174d14e4c4cd73e608a1b2859a1a mod_auth_gssapi-1.3.1-3.el7_2.x86_64.rpm Source: e0f126c18027a6840e3a7ccd231c56be98b535565370be89ef1e4893fabc59be mod_auth_gssapi-1.3.1-3.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 16 Date: Tue, 2 Aug 2016 21:58:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1533 CentOS 7 open-vm-tools BugFix Update Message-ID: <20160802215800.GA14785(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1533 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1533.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: fdb00a79877ae900ecd0cff8a0d2a8c49bb98ccf3fdb8213e9d8262552e339ba open-vm-tools-9.10.2-5.el7_2.x86_64.rpm 2e1fde70e984df57d841b25f255c98b51ddb4ca0fe7ba0f55a04f84756299b22 open-vm-tools-desktop-9.10.2-5.el7_2.x86_64.rpm ede2ac085acda2f587f2ec8d2651cb25a84ba59e9d80d1dbedd59c8d8c02a355 open-vm-tools-devel-9.10.2-5.el7_2.x86_64.rpm Source: 44fe417ac4e138ec8a229ced54131392dbb7343c812db6d752e47ef1a475e240 open-vm-tools-9.10.2-5.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 17 Date: Tue, 2 Aug 2016 21:58:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1537 CentOS 7 pacemaker BugFix Update Message-ID: <20160802215800.GA14892(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1537 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1537.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b25eba9657e8e90c2cfa0dfa1bba8825e43d3fe44148455b3acc0f9022e0c09d pacemaker-1.1.13-10.el7_2.4.x86_64.rpm ddaad61cfedc175ca263de9e0ec8eab3533b5f6fa4fa5c6ad7f44f37d6acfc5a pacemaker-cli-1.1.13-10.el7_2.4.x86_64.rpm 6f825de0a66a654ceecc9c9c49ca11a19ba2cedc79e57b606e63a4c12c06a58b pacemaker-cluster-libs-1.1.13-10.el7_2.4.i686.rpm 033a63f27db519c4a2a26316a4173e12ed5194195a48fbcaaf4194aed1a43df9 pacemaker-cluster-libs-1.1.13-10.el7_2.4.x86_64.rpm cc9d5a6e24a63527ee34dcfdafd3d60bec4a5c6315525f1326e30e4165c243c3 pacemaker-cts-1.1.13-10.el7_2.4.x86_64.rpm 94f402008c7d4510dd06e45925a8af14eabdd8d0af910b6dc09e8511fc8eb44d pacemaker-doc-1.1.13-10.el7_2.4.x86_64.rpm b27d4e8df3525b1cf92dbe88cb18f2d57a90dd4b1b5fc77f9542f9169fa7fc1d pacemaker-libs-1.1.13-10.el7_2.4.i686.rpm facf074928e6104fc1a0f5b08e34f855b50f4fc307c54c5eb67d6eb83ab50617 pacemaker-libs-1.1.13-10.el7_2.4.x86_64.rpm aea53689281fee48e12d59de4da400c066ac57fc5634ee973f0705f3ca7bbb0a pacemaker-libs-devel-1.1.13-10.el7_2.4.i686.rpm ceedc7ad5610cc58718e12bd62bf4c63b5a7d9517187b4cff11e2bd5e61a7f3c pacemaker-libs-devel-1.1.13-10.el7_2.4.x86_64.rpm 7e0ee9aa3aefd02f49378cb7ea78555417a395d050ff5bdad27078d063170f0d pacemaker-nagios-plugins-metadata-1.1.13-10.el7_2.4.x86_64.rpm ef3e2f897d05e7fe3da7dc022318c62a9570c9ed19c615e404aca0f0c1e32bbc pacemaker-remote-1.1.13-10.el7_2.4.x86_64.rpm Source: 5fd1fbb5e54c2f7414b1c3091915674411bf4a87411651aaa54b62962c87b615 pacemaker-1.1.13-10.el7_2.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 18 Date: Tue, 2 Aug 2016 21:58:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1535 CentOS 7 resource-agents BugFix Update Message-ID: <20160802215801.GA14960(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1535 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1535.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e94c43df92ac6f36ecfda5ae8a9c221cff7a078891ea7a847c7dcea55ac42b26 resource-agents-3.9.5-54.el7_2.16.x86_64.rpm Source: fb94fbf3b8b1b1755dad511aec62702f1cf60869fd278f10aa7b87e7461218dc resource-agents-3.9.5-54.el7_2.16.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 19 Date: Tue, 2 Aug 2016 21:58:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1540 CentOS 7 slapi-nis BugFix Update Message-ID: <20160802215801.GA15024(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1540 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1540.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e20458ce199954344cfec406b8df777791d32ed7bb3f7adf65ba620b1b0e260c slapi-nis-0.54-11.el7_2.x86_64.rpm Source: 0564eafd85b7dbebf551b7cde74e67b669d74caf052211749b60b3485341c443 slapi-nis-0.54-11.el7_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 20 Date: Tue, 2 Aug 2016 21:58:02 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1528 CentOS 7 sssd BugFix Update Message-ID: <20160802215802.GA15240(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1528 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1528.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 32e4c2f56dfc312f1de89aecfc70d4862094ae38d83878d7b5949c68d0d6821b libipa_hbac-1.13.0-40.el7_2.12.i686.rpm 889c65e1b907569dee408b5ae78ea3ae65d2193cd77da5fa8c8115327dc73297 libipa_hbac-1.13.0-40.el7_2.12.x86_64.rpm 9f30b3e11b0e6020663ea335fcbb77326581b1dfe9ddeb6f14fef913782acce6 libipa_hbac-devel-1.13.0-40.el7_2.12.i686.rpm 80beaa7194011ea87c711896ea744a993b99b5df30bedf8cf1f36b0fb718f22c libipa_hbac-devel-1.13.0-40.el7_2.12.x86_64.rpm 9fb339b53e1c292590743cee55668f63e42575c814d28dd3ac21faad424142b0 libsss_idmap-1.13.0-40.el7_2.12.i686.rpm 228c6b1bc5eaefd5609c0a56c048b07481cb9e0273491a647475b6ce9777a56b libsss_idmap-1.13.0-40.el7_2.12.x86_64.rpm f1b827b7615d20a9de6b7946df14ee4443c937e3a76665bf95633b2a197ef694 libsss_idmap-devel-1.13.0-40.el7_2.12.i686.rpm 18c2fbb12beb9945054472fd83f0993a796ca697128b3e20514c1bada1830986 libsss_idmap-devel-1.13.0-40.el7_2.12.x86_64.rpm eaa04fa51a09d5b93b90cdf1dce11a4fd115ba640b88eba666ec19683d33fc73 libsss_nss_idmap-1.13.0-40.el7_2.12.i686.rpm 955dd0c7c6cdefaf281cb6b740528b97817c303fefeeb9016bbce4763dc6a6cf libsss_nss_idmap-1.13.0-40.el7_2.12.x86_64.rpm cd72ffcaebd5fa71f6c3bc43ef896ae68ec9e710ce13b10c22e2eb6a7b3531ef libsss_nss_idmap-devel-1.13.0-40.el7_2.12.i686.rpm 5cafe7fad14c285931e5adca6cb8fc7e40dad6abeed7fc4db490d5620d9726f0 libsss_nss_idmap-devel-1.13.0-40.el7_2.12.x86_64.rpm d8eaf1a4ce2a1d38f4986b369da4ebafc758434bb9b2591ff38c61cd45ec2301 libsss_simpleifp-1.13.0-40.el7_2.12.i686.rpm 10abddea21a29dd20024cb074334df904842c3eff51a1a485411f5768734af70 libsss_simpleifp-1.13.0-40.el7_2.12.x86_64.rpm bb6463ebe3609d770c686a0af891a0a441d4f678341da8c378b01853049da48e libsss_simpleifp-devel-1.13.0-40.el7_2.12.i686.rpm d37153cc9510674697484e325e2d1bd16eca6f58426b211f2b6c842db05c6768 libsss_simpleifp-devel-1.13.0-40.el7_2.12.x86_64.rpm fa501867bab924edf244cc554647de1108bd124b6fdfd35d835b7482633648e3 python-libipa_hbac-1.13.0-40.el7_2.12.x86_64.rpm afda4fbd0d35c7f6288c0e06809cb49a21d9f61de390e7d53291337694b6771a python-libsss_nss_idmap-1.13.0-40.el7_2.12.x86_64.rpm 2d4f2e057900bb18c23e9c970f086b27aff70a99fbacaa75e09b2a6018d790b9 python-sss-1.13.0-40.el7_2.12.x86_64.rpm de3dcd4ae5e3a1d9a4c3fa6dafdf6b4e8d2e3f935c431df94a7d1a3882c06cdc python-sssdconfig-1.13.0-40.el7_2.12.noarch.rpm e0a697b5479a871b3a3eee7e9240d077895b46c7a3b47bca03b77ebc2d2bc9e1 python-sss-murmur-1.13.0-40.el7_2.12.x86_64.rpm 533deb46a44403d6f7516fd84497c3ffe1f0fdffcbf67d07ea6cd6320a33c37f sssd-1.13.0-40.el7_2.12.x86_64.rpm 18a7f217774edef408c5e7779670135d17f74dfb9a1e440cd79eb81c300fb4de sssd-ad-1.13.0-40.el7_2.12.x86_64.rpm 0da8b002ce85726f99b178ae3c7b60f60e812b1aceb3529260abd93fce75afde sssd-client-1.13.0-40.el7_2.12.i686.rpm abd640db9c5bac7be043a9e876ff57f39fc062134e1668025712265b49a42ace sssd-client-1.13.0-40.el7_2.12.x86_64.rpm aace9edf9be5d732a0e36125b448747bc8d3ee1baca80c5088bc10cbea21a913 sssd-common-1.13.0-40.el7_2.12.i686.rpm d8c66c933e9d66586e2d9be4871c61ff170c55e67bac6c597bf5e94dfbafe7d1 sssd-common-1.13.0-40.el7_2.12.x86_64.rpm 4adb5a1ced59f8f7a90b4219ec261cd3b351d321eabd3ae136411a6c99dd89cc sssd-common-pac-1.13.0-40.el7_2.12.x86_64.rpm e6bac02f646750d3859772b70a0149e350227b9d695c69fb9b6b12300f3d79b8 sssd-dbus-1.13.0-40.el7_2.12.x86_64.rpm f168c296264ac2c34fc6dd23b4376022621d0d0d6494b8075e08ddd75240c649 sssd-ipa-1.13.0-40.el7_2.12.x86_64.rpm 0504e1217f8cd45492785b93f317172997029a2f32778e91a5f0c59020fcbd2a sssd-krb5-1.13.0-40.el7_2.12.x86_64.rpm 06ee96ce7b0847d0ba26da4ed4da4266f0efad67ff90ab72b8d79d12fa9aa95f sssd-krb5-common-1.13.0-40.el7_2.12.i686.rpm b9ab015e38a0f116bb6ea26d4132165d61787221eeadb394cbacbca1ab50fbea sssd-krb5-common-1.13.0-40.el7_2.12.x86_64.rpm ddc206c34b2afc0e13eb57554ce3c2a879b88b0f5aaacc3b0d5048049d0d29bf sssd-ldap-1.13.0-40.el7_2.12.x86_64.rpm d8968383421e9577c806d3351335bbe6568be7ca8ff78a6c2fdb684085710ef8 sssd-libwbclient-1.13.0-40.el7_2.12.x86_64.rpm c9a93d0c35318ab146bfd45109dfecf0bd8335d129c962473aba54256976a8ce sssd-libwbclient-devel-1.13.0-40.el7_2.12.i686.rpm 130d5fd1bfad0087a5ae211d8f0428be85b4c84804f94d9dadf46540239fbe11 sssd-libwbclient-devel-1.13.0-40.el7_2.12.x86_64.rpm d366f4f8a5df0e5cb0c5cd2fbcb3076366c221c0c71e35417917b594f79a3664 sssd-proxy-1.13.0-40.el7_2.12.x86_64.rpm dc8c9d66a1f9cefa437b67a6161174e4fbd11a23d73f30a439b33f994706831d sssd-tools-1.13.0-40.el7_2.12.x86_64.rpm Source: e44ad39fcd66d107ce7452133f279f4838aa0611754d1cd4d1021d897bbdb147 sssd-1.13.0-40.el7_2.12.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 21 Date: Tue, 2 Aug 2016 21:58:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1524 CentOS 7 systemd BugFix Update Message-ID: <20160802215803.GA15354(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1524 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1524.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: bda78fc23abc267b03941439393c72dd7cf555fb0b351f8026a5d5f688ed23a4 libgudev1-219-19.el7_2.12.i686.rpm 8ade567b609afe96257145ea971690b1d3915740e2c166e8b7371ac19e3da828 libgudev1-219-19.el7_2.12.x86_64.rpm b925e971df79a47edb8922df45b13a0db7d7b9ffb0435e2b44a8ef5d97d3ddc1 libgudev1-devel-219-19.el7_2.12.i686.rpm d42a1d2b3c560523b8ee09a6ec8a0d1a85abe9810d6c0f0def54c669f0965c8a libgudev1-devel-219-19.el7_2.12.x86_64.rpm 75792ef5f2ea8aa6416fe737db71790a19447c36817773faa99f68b75e56760f systemd-219-19.el7_2.12.x86_64.rpm 6a087b6d5688e8d7cab3570c36839f5c9f595d4632c6b1eb1e00f50cb35652a7 systemd-devel-219-19.el7_2.12.i686.rpm e82b19b20b8a0f6a769247791319fc6bf8c8f3561f72887d13a56103a122a51c systemd-devel-219-19.el7_2.12.x86_64.rpm 8de87176260ba33bd375d4871e5eeb95cc13eacd4d356f1b4f476684c1117881 systemd-journal-gateway-219-19.el7_2.12.x86_64.rpm 70716c2d058530a45e247d88778d655c86907bef96a1b3a8c0866506ab11f8c4 systemd-libs-219-19.el7_2.12.i686.rpm 2a974bfb4d3c8454b3503eb434573742c95f5050829ba972bafdc1e8b87dd13c systemd-libs-219-19.el7_2.12.x86_64.rpm 8a55c13f4d0c73f7e12e3e8451185a4faf157a68e5c025da0422d6fec9065498 systemd-networkd-219-19.el7_2.12.x86_64.rpm 82c9d9e391f144cf5b40ad1575cd4d7c0e1a8abaa50d0f5aeaa13eb0d4a69822 systemd-python-219-19.el7_2.12.x86_64.rpm 28427c78759a519b6ead8c309691b8cb8a4d49aa959e179207b29f37ef2385de systemd-resolved-219-19.el7_2.12.i686.rpm c3748c6beb2ceb9be9d78765770d334f36c7eb6a078ee352f42b5aa942ff8193 systemd-resolved-219-19.el7_2.12.x86_64.rpm a55e91532e6bc9e896db0cdc0e02437297087a58ff61ac1ceb412a0142e79c8c systemd-sysv-219-19.el7_2.12.x86_64.rpm Source: e272d864553de8e726c9b1f21607c90e6897d05864f01dbcb7908d69189c172d systemd-219-19.el7_2.12.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 22 Date: Tue, 2 Aug 2016 21:58:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1525 CentOS 7 util-linux BugFix Update Message-ID: <20160802215803.GA15460(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1525 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1525.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5a3a1ce10d064860e7107b0151e41947b41c3257f871367e2bb389178f66f82a libblkid-2.23.2-26.el7_2.3.i686.rpm 8fd8faf31f78fa7eba90746e431a9783fa708d07cde89af1a78eb1ab22ecedb3 libblkid-2.23.2-26.el7_2.3.x86_64.rpm 11afa15930175eaad251e80219515a2ca55f54186d224a0596d59421af66c655 libblkid-devel-2.23.2-26.el7_2.3.i686.rpm 421613cb60b79dc810fb16cd84808cf5e38d9093ca73e8a9d4ebc301aefa8ff9 libblkid-devel-2.23.2-26.el7_2.3.x86_64.rpm 9ac9eeed69f6b4928fe16f90b3357b5d7667f5a4c3be974ae42ca569f8bd74ad libmount-2.23.2-26.el7_2.3.i686.rpm 5ae7eb92b7a9052a1b99cc5a72ca98f022e95268cea9f773d5cc246182453c81 libmount-2.23.2-26.el7_2.3.x86_64.rpm 480234ad68dc8e38543c698869ac09f6ee58d6f76ea2f449c82a3fdb196c64e8 libmount-devel-2.23.2-26.el7_2.3.i686.rpm cd97d32f83874dc9b56afe8f3e9505abda2ee80102fefe9b96dff36eef033d50 libmount-devel-2.23.2-26.el7_2.3.x86_64.rpm 43ac62ba2ac4f6988d6816c5a93a9f6c84ebe9a305d9c48d1cff71c45340390e libuuid-2.23.2-26.el7_2.3.i686.rpm f67077de4553a7b2dad780198a415d4e8aa52d01b3b06a6c1c31f91845f96ff6 libuuid-2.23.2-26.el7_2.3.x86_64.rpm 3f33b4ca36601a9ab539d145cbfab95f6db833dc6bb9984232cff770af2f284e libuuid-devel-2.23.2-26.el7_2.3.i686.rpm 2076dc94b40e20d7fe6a927ae95318ef69fb9b94e206283d5a478c098caf2f22 libuuid-devel-2.23.2-26.el7_2.3.x86_64.rpm bd5555c1cbe80fbff559114d3d64dcdfe020ddbdd8b9d41bf135a6d86d503a3d util-linux-2.23.2-26.el7_2.3.i686.rpm 0d09064460b5ed9a143b12e3e6ee9a69e9ecab63131be676148c0b60472fbff5 util-linux-2.23.2-26.el7_2.3.x86_64.rpm 61c8304347ea078ae907e6b07848c5f8f64212580870f2230a0f8405d1a2f5db uuidd-2.23.2-26.el7_2.3.x86_64.rpm Source: 1e2b8b57d11eccb5901236bc2b64f27a0019c6638a2d4d7464d06b5a5f759d36 util-linux-2.23.2-26.el7_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 23 Date: Tue, 2 Aug 2016 21:58:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1536 CentOS 7 virt-viewer BugFix Update Message-ID: <20160802215804.GA15526(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1536 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1536.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ffad11d03c7f4410ff1ee7521ac1f1d952839f4b8277300cad74227fc2f27b0f virt-viewer-2.0-6.el7_2.2.x86_64.rpm Source: 06e0983781777bc9ac4c9483fcac6ee235dc42fa91b61cb8aa36944919b7d8a6 virt-viewer-2.0-6.el7_2.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 24 Date: Tue, 2 Aug 2016 22:02:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2016:1526 CentOS 7 ipa BugFix Update Message-ID: <20160802220200.GA15704(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2016:1526 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1526.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: aecb6a756410dba2df2b6337b11eef312ff359f9b651728e15d31851b1619e3e ipa-admintools-4.2.0-15.0.1.el7.centos.18.x86_64.rpm caf6e93c851e3be312cdd7e05d7e9c65e3bf4b07ddeb75ff606ee12790236f89 ipa-client-4.2.0-15.0.1.el7.centos.18.x86_64.rpm f32c744300b63c258e8f896889f0b1f6be320aff37beace8d0fb0c54d796bf0d ipa-python-4.2.0-15.0.1.el7.centos.18.x86_64.rpm bc54427d863ea1ef249bbaa9b59d71bb9afb897df983f64b5a80f1f2c5cb601c ipa-server-4.2.0-15.0.1.el7.centos.18.x86_64.rpm b1c78cf6413bb5ba511199d95e03ac510ad569e76b18c2a9bfd1c345cf5fe848 ipa-server-dns-4.2.0-15.0.1.el7.centos.18.x86_64.rpm d5e7482c21ea60e3a8ad34c16f1e6a04ad586847bcd0e02f0689d69f2c8d607c ipa-server-trust-ad-4.2.0-15.0.1.el7.centos.18.x86_64.rpm Source: 2e49eeb571482b0012b2aa651a8aa7af2d54df0e2d803be4ab8d1d7084b407e7 ipa-4.2.0-15.0.1.el7.centos.18.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 138, Issue 1 ***********************************************

1 0

rss centos.announce outdated
by Ing. Adrian Hernández Yeja 03 Aug '16

03 Aug '16

Hi folks, I usually use the RSS feed http://rss.gmane.org/messages/complete/gmane.linux.centos.announce to know the centos updates but recently is outdated. Is this temporary? Is there another source? Thanks.

2 1

TLSv1.2 support for lftp on CentOS 6.x
by Olivier BONHOMME 02 Aug '16

02 Aug '16

Hello everybody, I am writing on that mailing list because I have an issue using lftp and I would love to have more infos about features available on the LFTP version provided by CentOS 6. I try to connect to a ftp server in secured mode using FTPS explicit and I would love to use TLSv1.2. After several tries, I understood that the TLS negociation was not possible using TLSv1.2 (It works only with TLSv1.1) but my issue is I don't understand why : - The GNU TLS Library provided by CentOS is TLSv1.2 compliant. I can use gnutls-cli in order to make a TLSv1.2 connection - It also works pefectly with an openssl client, so it's not a server side issue. - I don't see anything in the lftp changelog or features list saying that lftp is not compliant with TLSv1.2. So my question is : Can lftp provided by CentOS (of course last version in the 6.x branch), do TLSv1.2 connection ? If it is not possible, I can deal with it but I'm curious to know if it is a feature or a bug. Indeed if it's a bug it could be interesting to submit an issue for a potential resolution. Thanks for your answers Regards, Olivier Bonhomme

5 10

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss