Discuss

discuss@lists.centos.org

1 participants
34730 discussions

Re: [CentOS] CentOS 7 as a Fibre Channel SAN Target
by Steffan Cline 04 Jan '20

04 Jan '20

In waiting, I tried CentOS 8 which was an even bigger bust. I wiped that clean and tried again with Fedora 31. Same darn error "Could not create Target in configFS". Anyone?? Thank you, Steffan Cline steffan(a)hldns.com 602-793-0014 On 1/2/20, 2:00 AM, "CentOS on behalf of Steffan Cline via CentOS" <centos-bounces(a)centos.org on behalf of centos(a)centos.org> wrote: It took me some time to come back full circle to this. I've worked quite a bit on this with little success so far. It seems like it's been done but on some of the forums and Github, there are no responses yet. This is essentially a cross post from a seemingly dead list. Hopefully someone here will have some suggestions. I've googled this particular issue and not really finding any good results on how to resolve it. I installed targetcli via yum on CentOS 7 and this is the version in the repo: # targetcli targetcli shell version 2.1.fb49 Copyright 2011-2013 by Datera, Inc and others. For help on commands, type 'help'. I downloaded the .zip of the targetcli-fb version and tried it too from the scripts folder and same results. Python: # python --version Python 2.7.5 Libs: Installed Packages python-configshell.noarch 1:1.1.fb25-1.el7 @base python-rtslib.noarch 2.1.fb69-3.el7 @base python-rtslib-doc.noarch 2.1.fb69-3.el7 @base The error comes up when using create. /> /qla2xxx create naa.xxxxxxxxxxxxxxx Could not create Target in configFS Below is the info on my FC /> qla2xxx/ info Fabric module name: qla2xxx ConfigFS path: /sys/kernel/config/target/qla2xxx Allowed WWN types: naa Allowed WWNs list: naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx, naa.xxxxxxxxxxxxxxx Fabric module features: acls Corresponding kernel module: tcm_qla2xxx I have attached the log but don't see anything that really stands out. log.txt I checked per the link http://www.linux-iscsi.org/wiki/Fibre_Channel#Enable_target_mode to ensure that I have initiator mode disabled # cat /sys/module/qla2xxx/parameters/qlini_mode disabled The kernel modules are loaded. # lsmod | grep qla2xxx tcm_qla2xxx 32768 1 target_core_mod 335872 4 tcm_qla2xxx,iscsi_target_mod qla2xxx 634880 1 tcm_qla2xxx scsi_transport_fc 65536 3 bfa,qla2xxx,tcm_qla2xxx configfs is mounted: # cat /proc/mounts | grep configfs configfs /sys/kernel/config configfs rw,relatime 0 0 In the kernel config: CONFIG_CONFIGFS_FS=y Kernel: 4.4.207-1.el7.elrepo.x86_64 Should I be able to create a directory in /sys/kernel/config/target/qla2xxxx? # mkdir naa.10008c7cffc7ef01 mkdir: cannot create directory ‘naa.xxxxxxxxxxxxxxx’: Invalid argument I did notice that when I rebooted, there was no qla2xxx folder in /sys/kernel/config/target/ but after trying to use targetcli, it did make one so I'm not sure what else would cause it to fail. Suggestions? Thank you, Steffan Cline steffan(a)hldns.com 602-793-0014 On 1/11/19, 12:01 AM, "Steffan A. Cline" <steffan(a)hldns.com> wrote: For quite some time I’ve been using FreeNAS to provide services as a NAS over ethernet and SAN over Fibre Channel to CentOS 7 servers each using their own export, not sharing the same one. It’s time for me to replace my hardware and I have a new R720XD that I’d like to use in the same capacity but configure CentOS 7 as a Fibre Channel target rather than use FreeNAS any further. I’m doing virtualization and this will allow me to have failover from one node to the other since they’ll all be sharing the same export rather than me simply backing up to the FreeNAS server the way I am now. Does anyone know of any really good current articles that explain how to set up CentOS 7 as the target in such a configuration and also setting up CLVMd so they can all share an export over Fibre Channel from CentOS 7? Steffan A. Cline steffan(a)hldns.com 602-793-0014 _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos

1 0

systemd-coredump service
by sthustfo 04 Jan '20

04 Jan '20

I am unable to locate systemd-coredump service on CentOS 7.5. It is not listed under "systemctl -a" and also I'm unable to locate the associated unit file (folder /usr/lib/systemd/system/ ). Am I missing any package which installs this service?

2 2

tomcat package and repo for centos8
by Rainer Traut 02 Jan '20

02 Jan '20

Hi all, sadly there is no epel tomcat package so far. As per https://bugzilla.redhat.com/show_bug.cgi?id=1745960 there is no progress for three months. Is there any other third party repository which builds tomcat for centos/rhel 8? Thx Rainer

2 3

Nasty Fail2Ban update for Centos 7
by Allan 02 Jan '20

02 Jan '20

Hi all... Recently a new Fail2Ban was available among some other updates for my Centos 7 system, and I just updated all. It seems that was a very BAD idea. Just noticed that Fail2Ban have generated a 6MB error log because of the update, and FirewallD a 1MB log of errors ! (not sure if any of those were really working after this) ok, I'll just run yum downgrade fail2ban I thought. Naa, no way back - Epel doesn't have a fallback option ! Then gotta dig into Koji, to find the old version, download it, and downgrade to that - and pew, everything is back to normal. The old one seems to be version 0.9.7 and the new one is 0.10.4 I haven't had time to look into Fail2Bans info about these 2 version, but since there is a major version change - is it really possible to just upgrade these ? Sure, I would love to have a working 0.10.4 for my Centos 7 - but it shouldn't destroy my existing system - or it should at least warn me about that - or what to fix. Allan.

6 8

CentOS 7 as a Fibre Channel SAN Target
by Steffan A. Cline 02 Jan '20

02 Jan '20

For quite some time I’ve been using FreeNAS to provide services as a NAS over ethernet and SAN over Fibre Channel to CentOS 7 servers each using their own export, not sharing the same one. It’s time for me to replace my hardware and I have a new R720XD that I’d like to use in the same capacity but configure CentOS 7 as a Fibre Channel target rather than use FreeNAS any further. I’m doing virtualization and this will allow me to have failover from one node to the other since they’ll all be sharing the same export rather than me simply backing up to the FreeNAS server the way I am now. Does anyone know of any really good current articles that explain how to set up CentOS 7 as the target in such a configuration and also setting up CLVMd so they can all share an export over Fibre Channel from CentOS 7? Steffan A. Cline steffan(a)hldns.com 602-793-0014

2 1

KVM Random Reboots AMD EPYC Server
by Helmut Drodofsky 01 Jan '20

01 Jan '20

our new Server with AMD EPYC and super micro board reboots ramdonly. There is no error message before the reboot in /var/log/messages. we are running 2 Server with VMWare workstation without any problem. The new server should run KVM. older servers with AMD (before EPYC) running KVM without any problem. any idea or recommendation? -- Viele Grüße Helmut Drodofsky Internet XS Service GmbH Heßbrühlstraße 15 70565 Stuttgart Geschäftsführung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax: 0711 781941 79 Mail: info(a)internet-xs.de www.internet-xs.de

3 2

Nginx and SELinux on CentOS 7
by Nicolas Kovacs 01 Jan '20

01 Jan '20

Hi, I'm currently fiddling with Nginx on CentOS 7. Eventually I want to use it instead of Apache on some servers. Apache works more or less out of the box with SELinux. My websites are all stored under /var/www, and ls -Z shows me that all files created under /var/www are correctly labeled httpd_sys_content_t. On my sandbox server I don't have Apache (httpd) installed, only Nginx (the nginx package from EPEL). I manually created the /var/www directory and put a handful of static websites in there to play around with. Curiously enough, I got a SELinux alert. I took a peek in /var/www, and here's what the SELinux context looks like: unconfined_u:object_r:var_t:s0 Now I'm a bit puzzled. Is the correct httpd_sys_content_t context only applied if the httpd package is installed? How else can I explain this strange behavior? Any suggestions? Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

2 2

lapack
by Michael Hennebry 31 Dec '19

31 Dec '19

Has anyone gotten lapack to work on centos 7? If so, how? Most recently, I installed lapace-devel and let yum bring in what it wanted. Whenever I try to link, I get a long list of undefined references ending with /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/liblapacke.so: undefined reference to `dgeevx_' [hennebry@localhost test]$ nm -D /usr/lib64/libblas.so | grep dge 0000000000018850 T dgemm_ 0000000000011080 T dgemv_ 00000000000170c0 T dger_ [hennebry@localhost test]$ confirmes that the reference is not there. Installing blas or atlas first does not help. When installing lapack-devel, yum always wants to install blas-devel. What do I need? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

2 2

cannot install Centos 8 Stream
by Paul de Vries 30 Dec '19

30 Dec '19

I want to install Centos Stream on an older server. the Areca ARC-1680 RAID Controller is not supported anymore, so I tried to install on an external USB drive. i did a manual partitioning: sdc1 /boot/efi efi system partition sdc2 /boot ext4 sdc3 / lvm and the system cannot boot - hangs forever. new try: sdc1 /boot/efi, efi system partition sdc2 / xfs at end of install i see 'bootloader install failed'. debug shows 'NOTICE root:83haiku: debug: /dev/sdc1 is not a beFS partiotion: exiting' then i did an automatic partitioning and got no efi partition. and the system cannot boot - hangs forever. HOW do i install centos stream on external usb disk with efi boot?

1 0

looking for rpms in CentOS 8
by Patrick Rael 30 Dec '19

30 Dec '19

Hi, I can't find 3 rpms (for now, maybe more later) in centos 8, which are available for centos 7 and 6. perl-Crypt-SSLeay perl-Data-Validate-IP ndisc6 Any ideas why these aren't in the repos yet? I'm using these repos below and I've browsed repos searching for these. # dnf repolist ... repo id repo name status AppStream CentOS-8 - AppStream 5,089 BaseOS CentOS-8 - Base 2,843 Stream-AppStream CentOS-Stream - AppStream 4,629 Stream-BaseOS CentOS-Stream - Base 2,326 Stream-extras CentOS-Stream - Extras 3 cr CentOS-8 - cr 6,338 *epel Extra Packages for Enterprise Linux 8 - x86_64 3,732 extras CentOS-8 - Extras 3 Plus, I just want to say thanks for the entire CentOS team and community, you do a lot of work that is critical, and is highly appreciated! -->Pat ---------

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss