Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] good shell script examples?
by 洪　川 26 Nov '10

26 Nov '10

#!/bin/bash H=" 192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4 " for i in $H ; do expect << -EOF- set timeout 2 spawn scp ${rootidfile} root@${host}:/tmp/id_file expect "d:" send "${password}\n" expect eof spawn ssh ${host} expect "d:" send "${password}\n" expect "#" send "mkdir -p /root/.ssh; chmod 700 /root/.ssh\n" expect "#" send "cat /tmp/id_file >> /root/.ssh/authorized_keys\n" expect "#" send "rm -f /tmp/id_file; exit\n" expect eof -EOF- done http://www.bsdmap.com/2010/11/06/ssh-shell-script/ ------------------ Original ------------------ From: "Kill Script"<killscript(a)gmail.com>; Date: Tue, Nov 16, 2010 02:47 AM To: "centos"<centos(a)centos.org>; Subject: [CentOS] good shell script examples? I am looking for a beginner guide to shell scripting simple tasks on CentOS (e.g. ssh'ing into a server / router / switch, checking for certain things, then exiting and going to the next IP). Does anyone have any suggestions on where to look? ?(I'm relatively new to bash)

2 1

Terminal - name too long
by Johan Scheepers 26 Nov '10

26 Nov '10

Good day, > [johan@unknown2a6800000000 ~]$ How/where could I make the above a lot shorter please. Thanks Johan

4 6

centos 5.5 -software updater-break in download
by Johan Scheepers 26 Nov '10

26 Nov '10

Good day, New to centos, New install . Using - Software updater While updating - downloading 73 updates there was a break in the download. The break happened close to the end. Now when using software updater again will it start all over again? Go on where the break happened? Could not find on google this issue Kindly some advice please. Thanks, Regards Johan

3 2

CentOS vs. RHEL vs. Oracle Linux ?
by Niki Kovacs 26 Nov '10

26 Nov '10

Hi, I've been contacted by a local training center specialized in Oracle databases, to train a group of four administrators to use Linux. They're supposed to use Oracle Linux (more exactly "OL5"), which I understand is some specialized version of Red Hat Enterprise Linux. I'm reasonably proficient with CentOS. I've been using it exclusively on desktops and servers since 2007 (version 4.3 if I remember correctly), after a few years on Slackware and Debian. I've setup CentOS-based networks in small town halls, public libraries and schools, my dedicated webserver is running the latest CentOS, and I've published a book about basic Linux concepts entirely based on CentOS 5.3. On the other hand, I've never got to work on the "real thing", so to speak. The only time I put my hands on a Red Hat Enterprise Linux server was to retrieve the root password for a distracted client (add init=/bin/bash to the kernel line in GRUB, mount -o remount,rw /, passwd :oD). And I never came near a machine running Oracle Linux. What differences can I expect between a server running Oracle Linux and my average server running CentOS ? As far as I can guess, their "unbreakable" Linux kernel will still be some package called 'kernel' (with the according 'kernel-devel' and 'kernel-headers' packages). Probably Yum will be used as a dependency resolver (will it?), only with different repositories. And for the rest, I except it to work the same, in that I can still use chkconfig, ntsysv, rpm, etc. (what about system-config-securitylevel-tui or similar tools?) In short, what differences/similarities can I expect? Is there some document stating these? Cheers from the sunny South of France, Niki Kovacs -- http://www.microlinux.fr

6 9

PE850 Interrupt conflicts on CentOS 5 and onboard ethernet and pci-e serial
by Dan Irwin 26 Nov '10

26 Nov '10

Hello, I have an interrupt conflict between a two port pci-e serial card and the onboard ethernet controllers in a PowerEdge 850. I'm running kernel 2.6.18-194.26.1.el5PAE with bios revision A04. In every instance, the two serial ports have been allocated the same interrupts as the two ethernet controllers. I have tried many kernel boot options, including acpi=off, pci=noirq, acpi=noirq. When I enter the bios, I can see the same interrupts allocated to the serial ports and ethernet controllers. Attempting to change the interrupts manual causes both a nic and a serial port to both change, both to the same interrupt. I have even tried disabling onboard usb and serial with no change. I'm beginning to think the pci-e serial card is broken under linux. I have a similar card running on a PE850 under Windows Server 2003 and there are no such conflicts. Here is some output from lspci -v : 02:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd Unknown device 0001 Flags: medium devsel, IRQ 137 I/O ports at ecf8 [size=8] Memory at feaff000 (32-bit, non-prefetchable) [size=4K] I/O ports at ece0 [size=16] Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 02:01.0 Serial controller: Oxford Semiconductor Ltd OXCB950 Cardbus 16950 UART (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd Unknown device 0001 Flags: medium devsel, IRQ 145 I/O ports at ecf0 [disabled] [size=8] Memory at feafc000 (32-bit, non-prefetchable) [disabled] [size=4K] I/O ports at ecd0 [disabled] [size=16] Memory at feafb000 (32-bit, non-prefetchable) [disabled] [size=4K] Memory at feafa000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [40] Power Management version 1 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethe rnet PCI Express (rev 11) Subsystem: Dell Unknown device 01b6 Flags: bus master, fast devsel, latency 0, IRQ 137 Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable - Capabilities: [d0] Express Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethe rnet PCI Express (rev 11) Subsystem: Dell Unknown device 01b6 Flags: bus master, fast devsel, latency 0, IRQ 145 Memory at fe3f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable - Capabilities: [d0] Express Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel I'm fairly stumped, and I'm about ready to try different serial hardware. Any clues from the experts on this list? Regards, Dan ------ dan irwin it manager jackie's wholesale nurseries p/l t/a zoomgarden 56 coutts drive burpengary qld 4505 email dan(a)jackies.com.au tel 07 3888 2481 fax 07 3888 2530 ************************************************************************ Jackie's Legal Disclaimer: 1) This email is confidential and may contain legally privileged information. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this email in error, please notify us immediately by return email and delete the document. 2) All emails sent to and from Jackie's Wholesale Nurseries Pty Ltd. are scanned for content. Any material deemed to contain inappropriate subject matter will be reported to the email administrator of all parties concerned. ************************************************************************

2 3

set and lengthen time between screensavers
by Johan Scheepers 25 Nov '10

25 Nov '10

Good day, I am the only user of the laptop at home. Please, How/where can I change to keep to screen longer open. Thanks Johan

2 2

Add application to start at booting
by Johan Scheepers 25 Nov '10

25 Nov '10

Good day, Please, How/where can I add an application to start at boot up. Don't seem to find it in options available Thanks Johan

3 3

CENTOS 5.5 X86 continue get "out of memory" error?????
by mcclnx mcc 25 Nov '10

25 Nov '10

we just installed CENTOS 5.5 X86 (32 bits) on DELL server. After installed we also apply lated O.S. patches. This server have 64 GB RAM and run "2.6.18-194.26.1.el5PAE #1 SMP ". when I doing "cp", "mv". "ftp", .... it continue "kill" my process and pop up "out of memory" on /var/log/messages: ========================================================== Nov 24 16:36:25 MCC kernel: HighMem: 1*4kB 0*8kB 1*16kB 3210*32kB 17367*64kB 4010*128kB 2497*256kB 126*512kB 2*1024kB 0*2048kB 10549*4096kB = 45642004kB Nov 24 16:36:25 MCC kernel: 4927968 pagecache pages Nov 24 16:36:25 MCC kernel: Swap cache: add 0, delete 0, find 0/0, race 0+0 Nov 24 16:36:25 MCC kernel: Free swap = 36869116kB Nov 24 16:36:25 MCC kernel: Total swap = 36869116kB Nov 24 16:36:25 MCC kernel: Free swap: 36869116kB Nov 24 16:36:25 MCC kernel: 16777216 pages of RAM Nov 24 16:36:25 MCC kernel: 16547840 pages of HIGHMEM Nov 24 16:36:25 MCC kernel: 362985 reserved pages Nov 24 16:36:25 MCC kernel: 3334251 pages shared Nov 24 16:36:25 MCC kernel: 0 pages swap cached Nov 24 16:36:25 MCC kernel: 839171 pages dirty Nov 24 16:36:25 MCC kernel: 2 pages writeback Nov 24 16:36:25 MCC kernel: 3528 pages mapped Nov 24 16:36:25 MCC kernel: 59119 pages slab Nov 24 16:36:25 MCC kernel: 584 pages pagetables Nov 24 16:36:25 MCC kernel: Out of memory: Killed process 5114, UID 81, (dbus-daemon). Nov 24 16:37:11 MCC gpm[5531]: *** info [client.c(137)]: Nov 24 16:37:11 MCC gpm[5531]: Connecting at fd 6 =================================================== any one know why? Is CENTOS X86 5..5 really NOT stable version? Thanks.

10 16

New list ?
by Karanbir Singh 25 Nov '10

25 Nov '10

Hi, Taking this to a new thread. Thoughts on getting a new list started up ? Should it be centos-sysadmin or centos-infra ? Are we going to then restrict it to admin/infra related chatter ? in which case, does the eyeball density on this list reduce for that sort of content ? How about the politics and news stuff that gets posted to this list. And how would those things be addressed with the new admin focused list ? - KB

16 21

Novell sale news?
by Les Mikesell 25 Nov '10

25 Nov '10

Is anyone following the news of the Novell sale and some mysterious 'intellectual property assets' that were transferred to a holding company controlled by Microsoft? -- Les Mikesell lesmikesell(a)gmail.com

28 58

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss