Discuss

discuss@lists.centos.org

34758 discussions

Syslog do not work
by Tim_Davis＠cbca.com 31 Oct '09

31 Oct '09

Guys, attached is copy of both the i) /etc/sysconfig/syslog ii) /etc/syslog.conf I have a Centos ver5.3 The syslog is not working and also I installed Webmin, also it does not work, this is what the error is " Info Internet Explorer cannot display the webpage " icon Thanks 1. [root@bart ~]# cat /etc/sysconfig/syslog # Options to syslogd # -m 0 disables 'MARK' messages. # -r enables logging from remote machines # -x disables DNS lookups on messages recieved with -r # See syslogd(8) for more details SYSLOGD_OPTIONS="-m0 -r" # Options to klogd # -2 prints all kernel oops messages twice; once for klogd to decode, and # once for processing with 'ksymoops' # -x disables all klogd processing of oops messages entirely # See klogd(8) for more details KLOGD_OPTIONS="-x" # SYSLOG_UMASK=077 # set this to a umask value to use for all log files as in umask(1). # By default, all permissions are removed for "group" and "other". 2 [root@bart ~]# cat /etc/syslog.conf # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;news.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # TIM stuff *.*;local7.debug;local4.warnings /var/log/tim # Cisco Stuff local7.* /var/log/cisco # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log # # INN # news.=crit /var/log/news/news.crit news.=err /var/log/news/news.err news.notice /var/log/news/news.notice [root@bart ~]# 3 [root@bart ~]# ls anaconda-ks.cfg install.log webmin-1.490-1.noarch.rpm Desktop install.log.syslog firstboot.1256071953.31 tim.txt [root@bart ~]# ===================================== Tim Davis PMP, CCNP, CNE-5 CBCA 10900 Hampshire Ave. S. Bloomington, MN 55438 tim_davis(a)cbca.com http://twitter.com/tdalago 952-903-6304 ===================== NOTICE: The information contained in this electronic message, and any attachments accompanying this transmission, may be legally privileged and/or confidential and protected health information. This information is intended only for the use of the individual(s) and/or entity identified above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation and is required to protect the information after its stated need has been fulfilled. If you are not the intended recipient, or an employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, printing, copying, forwarding, or distributing of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately, by telephone or return fax/email, to advise of wrongful receipt and confirm your understanding of this Notice. Thank You.

3 2

Problem YUM Centos 5
by Adriano Frare 30 Oct '09

30 Oct '09

Dear Friends, Today , I ran command yum update and I received follow error below. ======================= BEGIN ========= Loaded plugins: fastestmirror Determining fastest mirrors Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 104, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 343, in doCommands return self.yum_cli_commands[self.basecmd].doCommand(self, self.basecmd, self.extcmds) File "/usr/share/yum-cli/yumcommands.py", line 554, in doCommand return base.search(extcmds) File "/usr/share/yum-cli/cli.py", line 691, in search for (po, keys, matched_value) in matching: File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 1593, in searchGenerator for sack in self.pkgSack.sacks.values(): File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 591, in <lambda> pkgSack = property(fget=lambda self: self._getSacks(), File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 434, in _getSacks self.repos.populateSack(which=repos) File "/usr/lib/python2.4/site-packages/yum/repos.py", line 223, in populateSack self.doSetup() File "/usr/lib/python2.4/site-packages/yum/repos.py", line 71, in doSetup self.ayum.plugins.run('postreposetup') File "/usr/lib/python2.4/site-packages/yum/plugins.py", line 176, in run func(conduitcls(self, self.base, conf, **kwargs)) File "/usr/lib/yum-plugins/fastestmirror.py", line 181, in postreposetup_hook all_urls = FastestMirror(all_urls).get_mirrorlist() File "/usr/lib/yum-plugins/fastestmirror.py", line 333, in get_mirrorlist self._poll_mirrors() File "/usr/lib/yum-plugins/fastestmirror.py", line 376, in _poll_mirrors pollThread.start() File "/usr/lib/python2.4/threading.py", line 416, in start _start_new_thread(self.__bootstrap, ()) thread.error: can't start new thread ============= END ========================= How I do solve it? Thnaks Adriano

6 5

Stripe vs Cylinder alignement...
by John Doe 30 Oct '09

30 Oct '09

Hi, I modified my kickstart to do some custom partioning and formating in a pre-install script. I am trying to align the partitions on the RAID stripe (and format with a correct stride). But, sfdisk complains that it does not start/end on a cylinder boundary (used -L option to limit complaining). Since the cylinder size is not a multiple of the stripe size, I cannot align on both. I tried to align the begining on the stripe and the end on the end of a cylinder, but sfdisk still compains... Basicaly, I have a 128KB (256 sectors) stripe, and 255*32 = 8160 sectors cylinders. What I am doing is: begin = ( begin / 256 ) * 256 end = ( end / 8160 ) * 8160 -1 So, for my first partition (96MB): begin=256 size = ( ( 96 * 1024 * 2 ) / 8160 ) * 8160 = 195840 sectors end = 195840 - 1 - 256 = 195583 Any idea what I am doing wrong in my calculations or logic? Thx, JD

4 4

CentOS-announce Digest, Vol 56, Issue 9
by centos-announce-request＠centos.org 30 Oct '09

30 Oct '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:1535 Moderate CentOS 3 i386 pidgin - security update (Tru Huynh) 2. CESA-2009:1535 Moderate CentOS 3 x86_64 pidgin - security update (Tru Huynh) 3. CEBA-2009:1468 CentOS 5 i386 autofs Update (Karanbir Singh) 4. CEBA-2009:1468 CentOS 5 x86_64 autofs Update (Karanbir Singh) 5. CEEA-2009:1435 CentOS 5 i386 cman Update (Karanbir Singh) 6. CEEA-2009:1435 CentOS 5 x86_64 cman Update (Karanbir Singh) 7. CEBA-2009:1516 CentOS 5 i386 cman Update (Karanbir Singh) 8. CEBA-2009:1516 CentOS 5 x86_64 cman Update (Karanbir Singh) 9. CEBA-2009:1511 CentOS 5 i386 coreutils Update (Karanbir Singh) 10. CEBA-2009:1511 CentOS 5 x86_64 coreutils Update (Karanbir Singh) 11. CESA-2009:1513 Moderate CentOS 5 i386 cups Update (Karanbir Singh) 12. CESA-2009:1513 Moderate CentOS 5 x86_64 cups Update (Karanbir Singh) 13. CESA-2009:1459 Important CentOS 5 i386 cyrus-imapd Update (Karanbir Singh) 14. CESA-2009:1459 Important CentOS 5 x86_64 cyrus-imapd Update (Karanbir Singh) 15. CEBA-2009:1515 CentOS 5 i386 device-mapper-multipath Update (Karanbir Singh) 16. CEBA-2009:1515 CentOS 5 x86_64 device-mapper-multipath Update (Karanbir Singh) 17. CESA-2009:1471 Important CentOS 5 i386 elinks Update (Karanbir Singh) 18. CESA-2009:1471 Important CentOS 5 x86_64 elinks Update (Karanbir Singh) 19. CESA-2009:1427 Moderate CentOS 5 i386 fetchmail Update (Karanbir Singh) 20. CESA-2009:1427 Moderate CentOS 5 x86_64 fetchmail Update (Karanbir Singh) 21. CESA-2009:1451 Moderate CentOS 5 i386 freeradius Update (Karanbir Singh) 22. CESA-2009:1451 Moderate CentOS 5 x86_64 freeradius Update (Karanbir Singh) 23. CEBA-2009:1533 CentOS 5 i386 gcc Update (Karanbir Singh) 24. CEBA-2009:1533 CentOS 5 x86_64 gcc Update (Karanbir Singh) 25. CESA-2009:1502 Important CentOS 5 i386 kdegraphics Update (Karanbir Singh) 26. CESA-2009:1502 Important CentOS 5 x86_64 kdegraphics Update (Karanbir Singh) 27. CESA-2009:1455 Moderate CentOS 5 x86_64 kernel Update (Karanbir Singh) 28. CESA-2009:1455 Moderate CentOS 5 i386 kernel Update (Karanbir Singh) 29. CEBA-2009:1422 CentOS 5 i386 ktune Update (Karanbir Singh) 30. CEBA-2009:1422 CentOS 5 x86_64 ktune Update (Karanbir Singh) 31. CESA-2009:1465 Important CentOS 5 i386 kvm Update (Karanbir Singh) 32. CESA-2009:1465 Important CentOS 5 x86_64 kvm Update (Karanbir Singh) 33. CEBA-2009:1488 CentOS 5 i386 kvm Update (Karanbir Singh) 34. CEBA-2009:1488 CentOS 5 x86_64 kvm Update (Karanbir Singh) 35. CEBA-2009:1525 CentOS 5 i386 libuser Update (Karanbir Singh) 36. CEBA-2009:1525 CentOS 5 x86_64 libuser Update (Karanbir Singh) 37. CEBA-2009:1424 CentOS 5 i386 libvirt Update (Karanbir Singh) 38. CEBA-2009:1424 CentOS 5 x86_64 libvirt Update (Karanbir Singh) 39. CEBA-2009:1421 CentOS 5 i386 libvirt-cim Update (Karanbir Singh) 40. CEBA-2009:1421 CentOS 5 x86_64 libvirt-cim Update (Karanbir Singh) 41. CEBA-2009:1476 CentOS 5 x86_64 lvm2 Update (Karanbir Singh) 42. CEBA-2009:1476 CentOS 5 i386 lvm2 Update (Karanbir Singh) 43. CEBA-2009:1475 CentOS 5 i386 lvm2-cluster Update (Karanbir Singh) 44. CEBA-2009:1475 CentOS 5 x86_64 lvm2-cluster Update (Karanbir Singh) 45. CESA-2009:1452 Moderate CentOS 5 i386 neon Update (Karanbir Singh) 46. CESA-2009:1452 Moderate CentOS 5 x86_64 neon Update (Karanbir Singh) 47. CEBA-2009:1437 CentOS 5 i386 net-snmp Update (Karanbir Singh) 48. CEBA-2009:1437 CentOS 5 x86_64 net-snmp Update (Karanbir Singh) 49. CESA-2009:1463 Moderate CentOS 5 i386 newt Update (Karanbir Singh) 50. CESA-2009:1463 Moderate CentOS 5 x86_64 newt Update (Karanbir Singh) 51. CEBA-2009:1527 CentOS 5 i386 nss_ldap Update (Karanbir Singh) 52. CEBA-2009:1474 CentOS 5 i386 openais Update (Karanbir Singh) 53. CEBA-2009:1527 CentOS 5 x86_64 nss_ldap Update (Karanbir Singh) 54. CEBA-2009:1474 CentOS 5 x86_64 openais Update (Karanbir Singh) 55. CEBA-2009:1487 CentOS 5 i386 OpenIPMI Update (Karanbir Singh) 56. CEBA-2009:1487 CentOS 5 x86_64 OpenIPMI Update (Karanbir Singh) 57. CESA-2009:1470 Moderate CentOS 5 i386 openssh Update (Karanbir Singh) 58. CESA-2009:1470 Moderate CentOS 5 x86_64 openssh Update (Karanbir Singh) 59. CESA-2009:1536 Moderate CentOS 5 i386 pidgin Update (Karanbir Singh) 60. CESA-2009:1536 Moderate CentOS 5 x86_64 pidgin Update (Karanbir Singh) 61. CESA-2009:1504 Important CentOS 5 x86_64 poppler Update (Karanbir Singh) 62. CESA-2009:1504 Important CentOS 5 i386 poppler Update (Karanbir Singh) 63. CESA-2009:1484 Moderate CentOS 5 i386 postgresql Update (Karanbir Singh) 64. CEBA-2009:1489 CentOS 5 i386 qspice Update (Karanbir Singh) 65. CESA-2009:1484 Moderate CentOS 5 x86_64 postgresql Update (Karanbir Singh) 66. CEBA-2009:1489 CentOS 5 x86_64 qspice Update (Karanbir Singh) 67. CESA-2009:1529 Moderate CentOS 5 i386 samba Update (Karanbir Singh) 68. CESA-2009:1529 Moderate CentOS 5 x86_64 samba Update (Karanbir Singh) 69. CEBA-2009:1495 CentOS 5 i386 selinux-policy Update (Karanbir Singh) 70. CEBA-2009:1494 CentOS 5 i386 tcsh Update (Karanbir Singh) 71. CEBA-2009:1495 CentOS 5 x86_64 selinux-policy Update (Karanbir Singh) 72. CEBA-2009:1494 CentOS 5 x86_64 tcsh Update (Karanbir Singh) 73. CEEA-2009:1467 CentOS 5 i386 tzdata Update (Karanbir Singh) 74. CEEA-2009:1467 CentOS 5 x86_64 tzdata Update (Karanbir Singh) 75. CEEA-2009:1532 CentOS 5 i386 tzdata Update (Karanbir Singh) 76. CEEA-2009:1532 CentOS 5 x86_64 tzdata Update (Karanbir Singh) 77. CESA-2009:1472 Moderate CentOS 5 i386 xen Update (Karanbir Singh) 78. CESA-2009:1472 Moderate CentOS 5 x86_64 xen Update (Karanbir Singh) 79. CEBA-2009:1514 CentOS 5 i386 xen Update (Karanbir Singh) 80. CEBA-2009:1514 CentOS 5 x86_64 xen Update (Karanbir Singh) 81. CESA-2009:1428 Moderate CentOS 5 i386 xmlsec1 Update (Karanbir Singh) 82. CESA-2009:1428 Moderate CentOS 5 x86_64 xmlsec1 Update (Karanbir Singh) 83. CESA-2009:1453 Moderate CentOS 5 i386 pidgin Update (Karanbir Singh) 84. CESA-2009:1453 Moderate CentOS 5 x86_64 pidgin Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Oct 2009 20:14:53 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2009:1535 Moderate CentOS 3 i386 pidgin - security update To: centos-announce(a)centos.org Message-ID: <20091029191453.GA12638(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2009:1535 pidgin security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2009-1535.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/pidgin-1.5.1-6.el3.i386.rpm source: updates/SRPMS/pidgin-1.5.1-6.el3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update pidgin Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

CentOS 5.4 :: partitionable RAID1
by Adrian Sevcenco 30 Oct '09

30 Oct '09

Hi! Did anyone tried this on 5.4? having a look on http://wiki.centos.org/HowTos/Install_On_Partitionable_RAID1 is would seem that that mkinitrd patch is no longer required. Can someone ack this? Thanks, Adrian

2 1

Default ACL question (EXECUTE BIT)
by Jorge Fábregas 30 Oct '09

30 Oct '09

Hello everyone, I'm doing some tests with ACL's and even though I can create a "default" ACL for a directory (that includes "rwx" for the default owner), when I finally create a file wihin that directory the execute bit is chopped off: [joe@machine ~]$ mkdir mydir [joe@machine ~]$ setfacl -d -m u::rwx,g::-,o::- mydir/ [joe@machine ~]$ cd mydir [joe@machine mydir]$ touch testFile.txt [joe@machine mydir]$ ls -l testFile.txt -rw------- 1 joe joe 0 Oct 29 21:14 testFile.txt I don't think umask is involved here. As far as I know umask isn't involved when dealing with default ACL's. Anyhow, I'm pretty sure this is by design (security-wise). Is there any way to override this behaviour? Thanks, Jorge

3 3

RAM errors after kernel-update
by Michael Schumacher 30 Oct '09

30 Oct '09

Hi, I updated a server yesterday from "kernel 2.6.18-128.7.1.el5xen" to "kernel 2.6.18-164.el5xen" After rebooting, my message log is flooded every second or so with this error messages: Oct 6 14:52:20 xenserver1 kernel: EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recovera ble Err=0x2000 (FB-DIMM Configuration Write error on first attempt)) and Oct 6 15:17:23 xenserver1 kernel: EDAC MC0: CE row 0, channel 0, label "": Corrected error (Branch=0 DRAM-Bank=0 RDWR=Read RAS=0 CAS=0, CE Err=0x10000 (Correctable Non-Mirrored Demand Data E CC)) The machine is a new Tyan S5397 mobo with 16GB Kingston RAM KVR667D2D4F5K2/8G Removing and replacing memory to different locations doesn't make any difference. After some digging, I noticed that the new kernel has added support for the i5400 chipset. I found some reference that the new kernel has this error reporting capability the old one hadn't. Question1: how many recoverable RAM errors are acceptable? Question2: The error appears always with the same id in the error message. Mobo problem? Question3: Are there any recommended BIOS settings to operate the RAM slower to see if the problem disappears? Question4: Any other proposals. Being located in Germany makes the "just return it to the dealer" proposal quite unattractive. best regards --- Michael Schumacher PAMAS Partikelmess- und Analysesysteme GmbH Dieselstr.10, D-71277 Rutesheim Tel +49-7152-99630 Fax +49-7152-996333 Geschäftsführer: Gerhard Schreck Handelsregister B Stuttgart HRB 252024

4 5

resolv.conf rewritten every reboot. How to figure out who and why?
by Dave 30 Oct '09

30 Oct '09

My machine has a static IP, with dhcp and IPv6 disabled. Every time I reboot, some process rewrites /etc/resolv.conf, including a comment about dhcpclient. The only package I have installed that shows up in "rpm -qa|grep -i dhcp" is dhcpv6-client-1.0.10-16.el5, and nothing in there is named dhcpclient. I'd like to figure out what software is rewriting this file and why. man 5 resolv.conf and man resolver are unhelpful in this case. rpm reports /etc/resolv.conf is not owned by any package. At this point, I am as (or more) interested in pointers regarding how to find the answer as I am in the actual answer. Please teach me to fish. mahalo, Dave

19 49

Re: [CentOS] printers... (HP)
by Per Qvindesland 30 Oct '09

30 Oct '09

Hi What is the model number? Regards Per Qvindesland At Thursday, 29-10-2009 on 20:27 "Robert" wrote: m.roth(a)5-cent.us wrote: > I can't remember if I asked here - I've got more than one printer, HP, > laser, builtin JetDirect. When I go there in a browser, I see the basic > thing, but I can't get to the networking page. It says that it wants a > password, no user name. It doesn't accept anything. Last week, a co-worker > reset one to factory defaults... and it comes up with the same thing. > Looking around on the Web, I don't see anything about a default password. > > Clues for the poor? > > mark > You might find something at http://articles.techrepublic.com.com/5100-10878_11-1054861.html or even at http://www.irongeek.com/i.php?page=security/networkprinterhacking No guarantee! I use Brother. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Benefits of VMWare 2.0 over 1.x?
by MHR 30 Oct '09

30 Oct '09

I've been running VMWare Server 1.x for some time now, currently on 1.08, and I've been pretty satisfied with it. I was wondering if any of you fellow VMWare users are seeing any significant benefit to moving to the 2.0 release. I'm running CentOS 5.4 with Linux 2.6.18-164.el5 #1 SMP x86_64 on an AMD 7750 64x2 with 4GB of RAM.... Thanks. mhr

5 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss