Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] ASUS PT6 or Intel DX58SO for CentOS?
by Vnpenguin 16 Feb '09

16 Feb '09

On Mon, Feb 16, 2009 at 2:54 PM, <jkinz(a)kinz.org> wrote: > On Mon, Feb 16, 2009 at 01:42:46PM +0100, Vnpenguin wrote: >> On Tue, Jan 13, 2009 at 10:44 PM, Chris Boyd <cboyd(a)gizmopartners.com> wrote: >> > I'm looking at setting up a new machine to run CentOS 5 and a few >> > VMWare machines to test Windows XP, Vista, and 7. I'm working with a >> > custom PC shop and they've recommended I use either the ASUS PT6 or >> > Intel DX58SO. Any feedback good or bad on either of these? >> > >> >> CentOS 5.2 can not found 2 on-board NIC of ASUS P6T Deluxe series. > > It is not clear what the above sentence is supposed to mean. > > Are you trying to say : > > "CentOS 5.2 can not be found on the ASUS P6T Deluxe series with 2 > on-board NICs." > > OR are you trying to say : > > "CentOS 5.2 can not find the 2 on-board NICs of ASUS P6T Deluxe > series." > Sorry, my bad english. I mean that when I installed CentOS 5.2 on a box with ASUS P6T, the installator of CentOS can not found 2 on-board NIC. So I have to add another NIC to work. -- http://vnoss.org

1 0

ASUS PT6 or Intel DX58SO for CentOS?
by Chris Boyd 16 Feb '09

16 Feb '09

I'm looking at setting up a new machine to run CentOS 5 and a few VMWare machines to test Windows XP, Vista, and 7. I'm working with a custom PC shop and they've recommended I use either the ASUS PT6 or Intel DX58SO. Any feedback good or bad on either of these? Thanks! --Chris

4 4

funny SMS server tips
by Fajar Priyanto 16 Feb '09

16 Feb '09

Hi guys, Hehe.. I thought I want to share this. In previous email, I said about monitoring server room. I just realize that we have this quite old sms server appliance in the room. It's still running though. I want to setup cronjob from linux machines, to send mail to that sms server, and it will then send sms to my cell about the machine condition. Problem is, nobody knows how to configure the sms server, and there's no docs beside a little description in the web UI. Been googling around few hours, but since it's quite old and proprietary, no good result. Problem is, the sms server's qmail refuses to work if I use hostname in the mail like mycellnum@sms-server. If I want to use mycellnum(a)192.168.1.100, sendmail refuses to send it as "host not found". So, out of curiosity, I define this in this /etc/hosts: 192.168.1.100 192.168.1.100 And now sending from sendmail to mycellnum(a)192.168.1.100 works! is it a feature or what? In network convention, all-numeric hostname is not allowed right? Hehe.. anyway, now I can monitor my server room using sms.

2 1

Re: [CentOS] Practical experience with NTLM/Windows Integrated Authentication [Apache]
by Christopher Chan 16 Feb '09

16 Feb '09

>> I don't think any other OS other than Windows has NTLM bindings. >> > > Probably not, but I was thinking there may be some obscure package somewhere > on the 'net to do this. > Hahaha, and I was hoping to flush it/them out.

1 0

Re: [CentOS] Practical experience with NTLM/Windows Integrated Authentication [Apache]
by Christopher Chan 16 Feb '09

16 Feb '09

>> No, NTLM auth works in Firefox (at least on Firefox on Windows, I >> don't think it will work in other platforms though). >> > > It doesn't. NTLM auth to eg Sharepoint sites works fine with Firefox in > Windows. Setting the same things in Firefox under linux and having it login > to sharepoint doesn't. > I don't think any other OS other than Windows has NTLM bindings.

2 1

network driver at installation time
by Jerry Geis 16 Feb '09

16 Feb '09

Is there anyway to load a network driver at installation time. Centos 5.2 x86_64. Alternatively, is there a way to do a USB network driver at boot? Either is fine... Presently I have a rtl 8168 that just hangs at DHCP request. I want to use all the kickstart information I have setup, but need the network to work for that. Any ideas? Jerry

3 3

ma78gm and esata
by Jerry Geis 16 Feb '09

16 Feb '09

Hi all, my motherboard ma78gm is working. I am trying to get working the esata. I plug in my external driver, power cycle the external drive. then turn on my machine. My drive sda is detect as normal. however I dont see anything about any other disk. dmesg didnt show anything. Is there something special needed to activate the esata drive? Jerry

2 2

tty login hangs
by Stewart Williams 15 Feb '09

15 Feb '09

Hi all, I have two servers both identical in hardware and I have just done a clean install of CentOS 5.2 x86_64 on both. Sometimes (more often than not) when I log in at the physical console (e.g. tty1, tty2, etc.) I will be logged in and it stops responding even if the shell is not doing anything. When this happens I can still switch to another VT with alt+f2 and login as normal. I don't know if bash, mingetty or whatever process is locking up. If I do a `ps ax` all processes are sleeping. Any idea's what could cause this? Thanks

3 4

httpd: "internal dummy connection"
by Mike -- EMAIL IGNORED 14 Feb '09

14 Feb '09

On my Centos 2.5 web server, in /var/log/httpd/access_log, I saw several occurrences of: new.mydomain.net - - [11/Feb/2009:14:34:58 -0500] "GET / HTTP/1.0" 403 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)" I have never seen anything like this before over many years of watching my logs. I presume it failed because my named virtual host does not have "new...", if for no other reason. What is it? Why do I have it now, and not before? Thanks for your advice. Mike.

5 7

Re: [CentOS] clamAV problem
by Mail List 14 Feb '09

14 Feb '09

>> >> All is still not well. Freshclam still tells me >> >> WARNING: Clamd was NOT notified: Can't connect to clamd through >> ~/tmp/clamd.socket >> >> Is this relative to root, or where? >> >>Anne Anne, First off you have to decide if you need clamd? If not then all you would need to do is edit freshclam.conf and tell it not to notify clamd. # Send the RELOAD command to clamd. # Default: no #NotifyClamd /path/to/clamd.conf I'm using the non rpm version for MailScanner. but your version activates it automatically. Also in the cron entry "/etc/cron.daily/freshclam" is -- is another entry telling freshclam to notify clamd. If you do need clamd then you can remove your touched socket, edit clamd.conf make sure it points to the right /tmp/clamd.socket. then.. service clamd start I hope that helps. Brian -- Brian http://wx.Tatorz.com Open WebMail Project (http://openwebmail.org) -- Brian http://wx.Tatorz.com Open WebMail Project (http://openwebmail.org) -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss