Discuss

discuss@lists.centos.org

3 participants
34748 discussions

compile question on CentOS 7
by Jerry Geis 18 Mar '19

18 Mar '19

I am trying to use the fnmatch() function in a C program and pass as the 3rd arg (options) of case insensitive search... When I use the value FNM_CASEFOLD it does not work... I'm confused on what to send to fnmatch() to do a case insensitive search. Any pointers ? Thanks. Jerry

2 2

netmask set with ifconfig doesn't hold
by KM 14 Mar '19

14 Mar '19

I gather that ifconfig is a way of setting the netmask in the current shell instead of a persistent value. I say this because I am running it and see it for my specific network interface, directly after running it. However if I restart the network service the netmask is reverted to the previous value. What is the correct way to set the new netmask for the network interface to make it persistent. if it's different for CentOS 6 and 7 I'd like to know that too. FYI - I tried searching about this but none of the info has really helped so far. Also consider this like "changing netmask for dummies" since I am not an administrator and am just searching and trying these things. Thanks very much in advance.KM

2 4

read permission on rotated logs
by Alice Wonder 14 Mar '19

14 Mar '19

When logs (e.g. /var/log/maillog) are rotated (e.g. to /var/log/maillog-YYYYMDD) is there a way via systemd or whatever to assign read permission to a specific group? Right now, for example - ls -l maillog* -rw------- 1 root root 3105240 Mar 13 22:04 maillog -rw------- 1 root root 1079031 Feb 24 04:39 maillog-20190224 -rw------- 1 root root 7237640 Mar 1 12:59 maillog-20190228 -rw------- 1 root root 1297508 Mar 3 04:21 maillog-20190303 -rw------- 1 root root 1319371 Mar 10 08:17 maillog-20190310 What I would like - ls -l maillog* -rw------- 1 root root 3105240 Mar 13 22:04 maillog -rw-r----- 1 root somegroup 1079031 Feb 24 04:39 maillog-20190224 -rw-r----- 1 root somegroup 7237640 Mar 1 12:59 maillog-20190228 -rw-r----- 1 root somegroup 1297508 Mar 3 04:21 maillog-20190303 -rw-r----- 1 root somegroup 1319371 Mar 10 08:17 maillog-20190310 That way a user in somegroup could run a script that analyzes the rotated logs w/o needing root privileges. Obviously I could put a script in /etc/cron.hourly that looks for rotated log files and changes ownership / permission, but I am wondering if there is a "proper" way to configure it via systemd or another utility.

4 5

howto monitor disks on a serveraid-8k?
by hwilmer 14 Mar '19

14 Mar '19

Hi, I'd like to monitor the disks connected to a ServeRaid-8k controller in a server running Centos 7 such that I can know when one fails. What's the best way to do that?

5 6

Have you used Duplicati 2.0.4.5 to backup CentOS 7.6 1810 Linux Server?
by Turritopsis Dohrnii Teo En Ming 14 Mar '19

14 Mar '19

Good evening from Singapore, Have you used Duplicati 2.0.4.5 to backup CentOS 7.6 1810 Linux Server? Is it good? Thank you for your review. ===BEGIN EMAIL SIGNATURE=== The Gospel for all Targeted Individuals (TIs): [The New York Times] Microwave Weapons Are Prime Suspect in Ills of U.S. Embassy Workers Link: https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html ******************************************************************************************** Singaporean Mr. Turritopsis Dohrnii Teo En Ming's Academic Qualifications as at 14 Feb 2019 [1] https://tdtemcerts.wordpress.com/ [2] https://tdtemcerts.blogspot.sg/ [3] https://www.scribd.com/user/270125049/Teo-En-Ming ===END EMAIL SIGNATURE===

1 0

Firefox view downloads folder - changed program
by Gary Stainburn 14 Mar '19

14 Mar '19

Hi All, A short while back, Firefox changed from using (I believe) Dolphin to using gwenview when I choose 'view in container' or 'view all downloads'. The problem with this is that when I choose 'view in containter' it no longer selects the appropriate file. Does anyone know how to change it back? I'm using C7 with KDE Gary

1 0

Centos installer not detecting hard drive
by Farid Izem 14 Mar '19

14 Mar '19

Hi, I have a new labtop and i want to install CentOS 7.6 on it. My labtop has two hard drives : - A 256Go SSD - A standard 1 To hard drive None of the two hard drives are detected by the Centos installer consequently i can't proceed with the installation. If i try with a Fedora server distro, then the standard hard drive is detected, the SSD one is still not detected. I do prefer to install Centos as is is the closed Linux version from RHEL, so what can i do to solve the issue ? Regards, Faird

3 2

Nvidia config tool config order of screens doesn t work
by Ralf Prengel 12 Mar '19

12 Mar '19

Hallo, after installing 2 Nvidia Gforce 650er cards (2 cards with 2 displays) and the driver from nvidia.com my 4 displays are active and everything is fine. My question: the option to configure the displays using the mouse to move the screens in the right order doesn t work like under windows with simple moving. Sometimes it is possible to change the order but sometimes it isn t possible to move a screen between 2 others. Any hints how to solve this? Ralf

1 0

CentOS-announce Digest, Vol 169, Issue 4
by centos-announce-request＠centos.org 12 Mar '19

12 Mar '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2019:0462 Moderate CentOS 6 java-1.7.0-openjdk Security Update (Johnny Hughes) 2. CEBA-2019:0479 CentOS 6 java-1.8.0-openjdk BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 11 Mar 2019 21:11:28 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:0462 Moderate CentOS 6 java-1.7.0-openjdk Security Update Message-ID: <20190311211128.GA29041(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:0462 Moderate Upstream details at : https://access.redhat.com/errata/RHSA-2019:0462 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c3586d95e2fa824ec412d2f80596f82fbe2b40301076695cc77b3c14f83f4bde java-1.7.0-openjdk-1.7.0.211-2.6.17.1.el6_10.i686.rpm bb7ff3eb2f4e0b76ea93028304445a8e5c705eccabcd52b3b24f3b0b63226ea9 java-1.7.0-openjdk-demo-1.7.0.211-2.6.17.1.el6_10.i686.rpm 3ae9e1e7a626483ee9e4dd6ff1ba253f09d9e3d7efd65a9580b990a554a2e8cf java-1.7.0-openjdk-devel-1.7.0.211-2.6.17.1.el6_10.i686.rpm 1ee44e9cfbe5f6a16937c09333e7bec92151d598cc7b2f8803a1d6be79cd06aa java-1.7.0-openjdk-javadoc-1.7.0.211-2.6.17.1.el6_10.noarch.rpm 50cebaa3180efa9307414f95d91096001296afb04e548c3f8043d00a98e1d12d java-1.7.0-openjdk-src-1.7.0.211-2.6.17.1.el6_10.i686.rpm x86_64: 2c3796a0d7ea50c8a42f11d2497e3e621874c0c99dbf560ee891e87e127853f1 java-1.7.0-openjdk-1.7.0.211-2.6.17.1.el6_10.x86_64.rpm f76a02ac6d800d638ff5c240a32dfbe971c8951968f65243354d0cbb7ecd5d61 java-1.7.0-openjdk-demo-1.7.0.211-2.6.17.1.el6_10.x86_64.rpm e38faa76e6932f73560cc97a3881778d90884b44a8d40a342317934015abe6ce java-1.7.0-openjdk-devel-1.7.0.211-2.6.17.1.el6_10.x86_64.rpm 1ee44e9cfbe5f6a16937c09333e7bec92151d598cc7b2f8803a1d6be79cd06aa java-1.7.0-openjdk-javadoc-1.7.0.211-2.6.17.1.el6_10.noarch.rpm 3644db16af85dab6ffc6f315eed6dc4d7d2a44e28c9240d7a25df371f6d40b87 java-1.7.0-openjdk-src-1.7.0.211-2.6.17.1.el6_10.x86_64.rpm Source: 3f4ee6b87f651c81639a673b89a91f437fd1ceccd4af70c04ba6b6a9deb4cc96 java-1.7.0-openjdk-1.7.0.211-2.6.17.1.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Mon, 11 Mar 2019 21:13:19 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:0479 CentOS 6 java-1.8.0-openjdk BugFix Update Message-ID: <20190311211318.GA29393(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:0479 Upstream details at : https://access.redhat.com/errata/RHBA-2019:0479 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2fe8e956a1fde3b17a3fbb6375fded2cf217d1975ec8af8e62a7bf8074e6cec1 java-1.8.0-openjdk-1.8.0.201.b09-2.el6_10.i686.rpm afa77339d1a036d20033ef51306d12cd02571657d4fd7c48502ac7a0f3ec78e9 java-1.8.0-openjdk-debug-1.8.0.201.b09-2.el6_10.i686.rpm 7404ea7c297949267a7078d74ded744674cd3160862f02a2dc575dea911b60c5 java-1.8.0-openjdk-demo-1.8.0.201.b09-2.el6_10.i686.rpm 5bbf1ebc4435d111e3215d1a42fbe87a5fc7d82c42b4e7132e54df997b8f2a44 java-1.8.0-openjdk-demo-debug-1.8.0.201.b09-2.el6_10.i686.rpm a3334a115ab3067167abbed8d98683b92d6b095d6ce127c0475f2c142c7b4328 java-1.8.0-openjdk-devel-1.8.0.201.b09-2.el6_10.i686.rpm 6dc8345628aaff8e0ccfcbc5632f9eeac9146313cc34804b6c2e3c92175b012d java-1.8.0-openjdk-devel-debug-1.8.0.201.b09-2.el6_10.i686.rpm 37c3df334dd5006a2e8ce2c71fb7ade3cae8bf38093f918e16edbfcfc95298c4 java-1.8.0-openjdk-headless-1.8.0.201.b09-2.el6_10.i686.rpm 7ea58fcbfb9153bc2ad278c00d5d34bcaafe16b853b321795546957de38281b7 java-1.8.0-openjdk-headless-debug-1.8.0.201.b09-2.el6_10.i686.rpm 16c016d68790d1ac98af90c250b325567a4835a5ddb3cc1f32bc56da28b2ebeb java-1.8.0-openjdk-javadoc-1.8.0.201.b09-2.el6_10.noarch.rpm 7d5f25a2dc59f614089a6fb32df5d6629ffa044c33994f856690425324a67c9e java-1.8.0-openjdk-javadoc-debug-1.8.0.201.b09-2.el6_10.noarch.rpm 89efdce04af33883b72119c2982c640cfee49707c8c9e2aa07876f05fec3ff60 java-1.8.0-openjdk-src-1.8.0.201.b09-2.el6_10.i686.rpm 6caec6b37885983d9b61b0e383eed167caa93c83b58522892f0e9b0c62c4d70a java-1.8.0-openjdk-src-debug-1.8.0.201.b09-2.el6_10.i686.rpm x86_64: aebc0831d818aa4011107bbf32ed7d0bcbe350f6b1bb9ea3d3d16d26bbf3a8f9 java-1.8.0-openjdk-1.8.0.201.b09-2.el6_10.x86_64.rpm 626d04faa658cc4d243bd7b7e24243e48e75538d1546b70d0a395a28da640e99 java-1.8.0-openjdk-debug-1.8.0.201.b09-2.el6_10.x86_64.rpm f504d15cb99f34d690ef34fd60e592ce0dfb4495e4c15c7b6f9e97cdc5fea86f java-1.8.0-openjdk-demo-1.8.0.201.b09-2.el6_10.x86_64.rpm c09f89875b81d01ab39ad3ba327382316ff1499d614725bd0a326d7e46530eae java-1.8.0-openjdk-demo-debug-1.8.0.201.b09-2.el6_10.x86_64.rpm 84a3f313db2dfce7ca1245f5bf36e6a16d3688e4d1a038f1ca418c53feb89926 java-1.8.0-openjdk-devel-1.8.0.201.b09-2.el6_10.x86_64.rpm 9a8e4d8667a689ffa27edb72b78a06286431caa520b40324f973ffa47a12243d java-1.8.0-openjdk-devel-debug-1.8.0.201.b09-2.el6_10.x86_64.rpm 1d2cfe49fcb8aa2fa3ee52453faee27df62e5eeb52978f54404b4998f15b0c62 java-1.8.0-openjdk-headless-1.8.0.201.b09-2.el6_10.x86_64.rpm c8b4de089bb0ca589d0bca526ac59fd918b86d1b0fa8439974179e1a7d9b4f9f java-1.8.0-openjdk-headless-debug-1.8.0.201.b09-2.el6_10.x86_64.rpm 16c016d68790d1ac98af90c250b325567a4835a5ddb3cc1f32bc56da28b2ebeb java-1.8.0-openjdk-javadoc-1.8.0.201.b09-2.el6_10.noarch.rpm 7d5f25a2dc59f614089a6fb32df5d6629ffa044c33994f856690425324a67c9e java-1.8.0-openjdk-javadoc-debug-1.8.0.201.b09-2.el6_10.noarch.rpm ecf829a845ff9f466ea32956109bbe314711e1b3f870348945f7f46f005a4cf3 java-1.8.0-openjdk-src-1.8.0.201.b09-2.el6_10.x86_64.rpm 9d227593bd94a71f38b5e801fa5e032a94407cd557cc4e629df23b3eb301b3ab java-1.8.0-openjdk-src-debug-1.8.0.201.b09-2.el6_10.x86_64.rpm Source: 35da6bd4135bb3d8e2af49950d447d6180da0317d620b6406b6ca65ec55d0d04 java-1.8.0-openjdk-1.8.0.201.b09-2.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 169, Issue 4 ***********************************************

1 0

CPAN not working, or is it?
by Gary Stainburn 12 Mar '19

12 Mar '19

(I've just tried this on a second C7 box, literally clean install, only did it on Friday, with the same results) I'm replacing a dead F19 box with a new C7 one and I'm trying to get my Perl install completed. Ultimately, I need to get Selenium::Remote::Driver working, but I'm struggling before that. I started off as always by using RPM's for everything I possibly can. I then started to use CPAN for everything else. It looked like CPAN was working and things were installing "OK". However, as I went for bigger modules, anything that had dependences were then failing as the dependencie were installed OK but then did not appear to be available. The last thing I've just tried is to update CPAN as the RPM is 1.9800 and the latest is 2.6. As you can see below, the install worked, but when it reloaded, or when I came out and went back in, it still showed 1.9800 Anyone got any ideas what I need to do? cpan[2]> install CPAN Running install for module 'CPAN' Running make for A/AN/ANDK/CPAN-2.25.tar.gz Fetching with LWP: http://mirror.bytemark.co.uk/CPAN/authors/id/A/AN/ANDK/CPAN-2.25.tar.gz Fetching with LWP: http://mirror.bytemark.co.uk/CPAN/authors/id/A/AN/ANDK/CHECKSUMS Checksum for /root/.cpan/sources/authors/id/A/AN/ANDK/CPAN-2.25.tar.gz ok CPAN.pm: Building A/AN/ANDK/CPAN-2.25.tar.gz Importing PAUSE public key into your GnuPG keychain... done! (You may wish to trust it locally with 'gpg --lsign-key 450F89EC') Checking if your kit is complete... Looks good Writing Makefile for CPAN Writing MYMETA.yml and MYMETA.json cp lib/CPAN.pm blib/lib/CPAN.pm cp lib/CPAN/CacheMgr.pm blib/lib/CPAN/CacheMgr.pm cp lib/CPAN/FTP/netrc.pm blib/lib/CPAN/FTP/netrc.pm cp lib/CPAN/LWP/UserAgent.pm blib/lib/CPAN/LWP/UserAgent.pm cp lib/CPAN/FTP.pm blib/lib/CPAN/FTP.pm cp lib/CPAN/Queue.pm blib/lib/CPAN/Queue.pm cp lib/CPAN/Distroprefs.pm blib/lib/CPAN/Distroprefs.pm cp lib/CPAN/Kwalify/distroprefs.yml blib/lib/CPAN/Kwalify/distroprefs.yml cp lib/App/Cpan.pm blib/lib/App/Cpan.pm cp lib/CPAN/Kwalify.pm blib/lib/CPAN/Kwalify.pm cp lib/CPAN/Module.pm blib/lib/CPAN/Module.pm cp lib/CPAN/Author.pm blib/lib/CPAN/Author.pm cp lib/CPAN/Debug.pm blib/lib/CPAN/Debug.pm cp lib/CPAN/HTTP/Credentials.pm blib/lib/CPAN/HTTP/Credentials.pm cp lib/CPAN/API/HOWTO.pod blib/lib/CPAN/API/HOWTO.pod cp lib/CPAN/Complete.pm blib/lib/CPAN/Complete.pm cp lib/CPAN/HTTP/Client.pm blib/lib/CPAN/HTTP/Client.pm cp lib/CPAN/FirstTime.pm blib/lib/CPAN/FirstTime.pm cp lib/CPAN/Exception/blocked_urllist.pm blib/lib/CPAN/Exception/blocked_urllist.pm cp lib/CPAN/Distrostatus.pm blib/lib/CPAN/Distrostatus.pm cp lib/CPAN/Admin.pm blib/lib/CPAN/Admin.pm cp lib/CPAN/Tarzip.pm blib/lib/CPAN/Tarzip.pm cp lib/CPAN/Prompt.pm blib/lib/CPAN/Prompt.pm cp lib/CPAN/URL.pm blib/lib/CPAN/URL.pm cp lib/CPAN/Version.pm blib/lib/CPAN/Version.pm cp lib/CPAN/DeferredCode.pm blib/lib/CPAN/DeferredCode.pm cp lib/CPAN/Distribution.pm blib/lib/CPAN/Distribution.pm cp lib/CPAN/Nox.pm blib/lib/CPAN/Nox.pm cp lib/CPAN/Exception/RecursiveDependency.pm blib/lib/CPAN/Exception/RecursiveDependency.pm cp lib/CPAN/Bundle.pm blib/lib/CPAN/Bundle.pm cp lib/CPAN/Plugin/Specfile.pm blib/lib/CPAN/Plugin/Specfile.pm cp lib/CPAN/Shell.pm blib/lib/CPAN/Shell.pm cp lib/CPAN/InfoObj.pm blib/lib/CPAN/InfoObj.pm cp lib/CPAN/HandleConfig.pm blib/lib/CPAN/HandleConfig.pm cp lib/CPAN/Exception/yaml_process_error.pm blib/lib/CPAN/Exception/yaml_process_error.pm cp lib/CPAN/Plugin.pm blib/lib/CPAN/Plugin.pm cp lib/CPAN/Exception/yaml_not_installed.pm blib/lib/CPAN/Exception/yaml_not_installed.pm cp lib/CPAN/Index.pm blib/lib/CPAN/Index.pm cp lib/CPAN/Kwalify/distroprefs.dd blib/lib/CPAN/Kwalify/distroprefs.dd cp lib/CPAN/Mirrors.pm blib/lib/CPAN/Mirrors.pm cp scripts/cpan-mirrors blib/script/cpan-mirrors /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan-mirrors cp scripts/cpan blib/script/cpan /usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan Manifying blib/man1/cpan-mirrors.1 Manifying blib/man1/cpan.1 Manifying blib/man3/CPAN.3pm Manifying blib/man3/CPAN::Admin.3pm Manifying blib/man3/CPAN::Tarzip.3pm Manifying blib/man3/CPAN::Queue.3pm Manifying blib/man3/CPAN::Distroprefs.3pm Manifying blib/man3/CPAN::Version.3pm Manifying blib/man3/App::Cpan.3pm Manifying blib/man3/CPAN::Kwalify.3pm Manifying blib/man3/CPAN::Nox.3pm Manifying blib/man3/CPAN::Plugin::Specfile.3pm Manifying blib/man3/CPAN::Debug.3pm Manifying blib/man3/CPAN::HandleConfig.3pm Manifying blib/man3/CPAN::Plugin.3pm Manifying blib/man3/CPAN::API::HOWTO.3pm Manifying blib/man3/CPAN::Mirrors.3pm Manifying blib/man3/CPAN::FirstTime.3pm ANDK/CPAN-2.25.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00signature.t ............... skipped: No Module::Signature found [INC = /root/.cpan/build/CPAN-2.25-YZAzWH/blib/lib /root/.cpan/build/CPAN-2.25-YZAzWH/blib/arch /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .] t/01loadme.t .................. ok t/02nox.t ..................... ok t/03pkgs.t .................... ok t/04clean_load.t .............. ok t/10version.t ................. ok t/11mirroredby.t .............. ok t/12cpan.t .................... ok t/13tarzip.t .................. ok t/14forkbomb.t ................ skipped: test only run when called with --doit t/30shell.t ................... skipped: no Expect, maybe try env CPAN_RUN_SHELL_TEST_WITHOUT_EXPECT=1 t/31sessions.t ................ skipped: Module::Build not installed t/41distribution.t ............ 1/20 No or no sufficiently recent CPAN::Perl::Releases installed at t/41distribution.t line 60. t/41distribution.t ............ ok t/42distroprefs.t ............. ok t/43distroprefspref.t ......... ok t/44cpanmeta.t ................ ok t/50pod.t ..................... skipped: Test::Pod 1.00 required for testing POD t/51pod.t ..................... ok t/52podcover.t ................ skipped: Test::Pod::Coverage 0.18 required for testing pod coverage t/60credentials.t ............. ok t/70_critic.t ................. skipped: Test::Perl::Critic only run when AUTHOR_TEST set t/71_minimumversion.t ......... skipped: running MinimumVersion test only run when AUTHOR_TEST set t/97-compile.t ................ ok t/97-cpanpm_output_hook.t ..... ok t/97-expand_filenames.t ....... ok t/97-install_hack.t ........... ok t/97-mock.t ................... ok t/97-process_options.t ........ ok t/97-process_setup_options.t .. ok t/97-return_values.t .......... ok t/97-run.t .................... # will run '/usr/bin/perl -Mblib blib/script/cpan -y 2>&1' t/97-run.t .................... 1/32 # will run '/usr/bin/perl -Mblib blib/script/cpan -h 2>&1' t/97-run.t .................... ok All tests successful. Files=31, Tests=494, 9 wallclock secs ( 0.10 usr 0.03 sys + 7.47 cusr 1.02 csys = 8.62 CPU) Result: PASS ANDK/CPAN-2.25.tar.gz /usr/bin/make test -- OK Running make install Manifying blib/man1/cpan-mirrors.1 Manifying blib/man1/cpan.1 Installing /root/perl5/lib/perl5/CPAN.pm Installing /root/perl5/lib/perl5/CPAN/CacheMgr.pm Installing /root/perl5/lib/perl5/CPAN/FTP.pm Installing /root/perl5/lib/perl5/CPAN/Queue.pm Installing /root/perl5/lib/perl5/CPAN/Distroprefs.pm Installing /root/perl5/lib/perl5/CPAN/Kwalify.pm Installing /root/perl5/lib/perl5/CPAN/Module.pm Installing /root/perl5/lib/perl5/CPAN/Author.pm Installing /root/perl5/lib/perl5/CPAN/Debug.pm Installing /root/perl5/lib/perl5/CPAN/Complete.pm Installing /root/perl5/lib/perl5/CPAN/FirstTime.pm Installing /root/perl5/lib/perl5/CPAN/Distrostatus.pm Installing /root/perl5/lib/perl5/CPAN/Admin.pm Installing /root/perl5/lib/perl5/CPAN/Tarzip.pm Installing /root/perl5/lib/perl5/CPAN/Prompt.pm Installing /root/perl5/lib/perl5/CPAN/URL.pm Installing /root/perl5/lib/perl5/CPAN/Version.pm Installing /root/perl5/lib/perl5/CPAN/DeferredCode.pm Installing /root/perl5/lib/perl5/CPAN/Distribution.pm Installing /root/perl5/lib/perl5/CPAN/Nox.pm Installing /root/perl5/lib/perl5/CPAN/Bundle.pm Installing /root/perl5/lib/perl5/CPAN/Shell.pm Installing /root/perl5/lib/perl5/CPAN/InfoObj.pm Installing /root/perl5/lib/perl5/CPAN/HandleConfig.pm Installing /root/perl5/lib/perl5/CPAN/Plugin.pm Installing /root/perl5/lib/perl5/CPAN/Index.pm Installing /root/perl5/lib/perl5/CPAN/Mirrors.pm Installing /root/perl5/lib/perl5/CPAN/FTP/netrc.pm Installing /root/perl5/lib/perl5/CPAN/LWP/UserAgent.pm Installing /root/perl5/lib/perl5/CPAN/Kwalify/distroprefs.yml Installing /root/perl5/lib/perl5/CPAN/Kwalify/distroprefs.dd Installing /root/perl5/lib/perl5/CPAN/HTTP/Credentials.pm Installing /root/perl5/lib/perl5/CPAN/HTTP/Client.pm Installing /root/perl5/lib/perl5/CPAN/API/HOWTO.pod Installing /root/perl5/lib/perl5/CPAN/Exception/blocked_urllist.pm Installing /root/perl5/lib/perl5/CPAN/Exception/RecursiveDependency.pm Installing /root/perl5/lib/perl5/CPAN/Exception/yaml_process_error.pm Installing /root/perl5/lib/perl5/CPAN/Exception/yaml_not_installed.pm Installing /root/perl5/lib/perl5/CPAN/Plugin/Specfile.pm Installing /root/perl5/lib/perl5/App/Cpan.pm Installing /root/perl5/man/man1/cpan-mirrors.1 Installing /root/perl5/man/man1/cpan.1 Installing /root/perl5/man/man3/CPAN.3pm Installing /root/perl5/man/man3/CPAN::Admin.3pm Installing /root/perl5/man/man3/CPAN::Tarzip.3pm Installing /root/perl5/man/man3/CPAN::Queue.3pm Installing /root/perl5/man/man3/CPAN::Distroprefs.3pm Installing /root/perl5/man/man3/CPAN::Version.3pm Installing /root/perl5/man/man3/App::Cpan.3pm Installing /root/perl5/man/man3/CPAN::Kwalify.3pm Installing /root/perl5/man/man3/CPAN::Nox.3pm Installing /root/perl5/man/man3/CPAN::Plugin::Specfile.3pm Installing /root/perl5/man/man3/CPAN::Debug.3pm Installing /root/perl5/man/man3/CPAN::HandleConfig.3pm Installing /root/perl5/man/man3/CPAN::Plugin.3pm Installing /root/perl5/man/man3/CPAN::API::HOWTO.3pm Installing /root/perl5/man/man3/CPAN::Mirrors.3pm Installing /root/perl5/man/man3/CPAN::FirstTime.3pm Installing /root/perl5/bin/cpan-mirrors Installing /root/perl5/bin/cpan Appending installation info to /root/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod ANDK/CPAN-2.25.tar.gz /usr/bin/make install -- OK cpan[3]> reload cpan (CPAN__unchanged__v1.9800)(CPAN::Author__unchanged__v5.5001) (CPAN::CacheMgr__unchanged__v5.5001)(CPAN::Complete__unchanged__v5.5) (CPAN::Debug__unchanged__v5.5001)(CPAN::DeferredCode__unchanged__v5.50) (CPAN::Distribution__unchanged__v1.9602)(CPAN::Distroprefs__unchanged__v6) (CPAN::Distrostatus__unchanged__v5.5) (CPAN::Exception::RecursiveDependency..v5.5) (CPAN::Exception::yaml_not_installed..v5.5)(CPAN::FTP__unchanged__v5.5005) (CPAN::FTP::netrc__unchanged__v1.01)(CPAN::HandleConfig__unchanged__v5.5003) (CPAN::Index__unchanged__v1.9600)(CPAN::InfoObj__unchanged__v5.5) (CPAN::LWP::UserAgent....v1.9600)(CPAN::Module__unchanged__v5.5001) (CPAN::Prompt__unchanged__v5.5)(CPAN::Queue__unchanged__v5.5001) (CPAN::Shell__unchanged__v5.5002)(CPAN::Tarzip__unchanged__v5.5011) (CPAN::Version__unchanged__v5.5001) 8 subroutines redefined cpan[4]> Lockfile removed. [root@lou ~]# cpan cpan shell -- CPAN exploration and modules installation (v1.9800) Enter 'h' for help. cpan[1]>

5 12

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss